diff options
Diffstat (limited to 'drivers/gpio')
-rw-r--r-- | drivers/gpio/Kconfig | 1 | ||||
-rw-r--r-- | drivers/gpio/gpio-omap.c | 25 | ||||
-rw-r--r-- | drivers/gpio/gpio-vf610.c | 26 |
3 files changed, 30 insertions, 22 deletions
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 71c0ab46f216..1d090585ebdc 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -774,6 +774,7 @@ config GPIO_ADP5588 config GPIO_ADP5588_IRQ bool "Interrupt controller support for ADP5588" depends on GPIO_ADP5588=y + select GPIOLIB_IRQCHIP help Say yes here to enable the adp5588 to be used as an interrupt controller. It requires the driver to be built in the kernel. diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c index 9fcdb9fe5e87..1e959acb1661 100644 --- a/drivers/gpio/gpio-omap.c +++ b/drivers/gpio/gpio-omap.c @@ -296,6 +296,22 @@ static void omap_clear_gpio_debounce(struct gpio_bank *bank, unsigned offset) } } +/* + * Off mode wake-up capable GPIOs in bank(s) that are in the wakeup domain. + * See TRM section for GPIO for "Wake-Up Generation" for the list of GPIOs + * in wakeup domain. If bank->non_wakeup_gpios is not configured, assume none + * are capable waking up the system from off mode. + */ +static bool omap_gpio_is_off_wakeup_capable(struct gpio_bank *bank, u32 gpio_mask) +{ + u32 no_wake = bank->non_wakeup_gpios; + + if (no_wake) + return !!(~no_wake & gpio_mask); + + return false; +} + static inline void omap_set_gpio_trigger(struct gpio_bank *bank, int gpio, unsigned trigger) { @@ -327,13 +343,7 @@ static inline void omap_set_gpio_trigger(struct gpio_bank *bank, int gpio, } /* This part needs to be executed always for OMAP{34xx, 44xx} */ - if (!bank->regs->irqctrl) { - /* On omap24xx proceed only when valid GPIO bit is set */ - if (bank->non_wakeup_gpios) { - if (!(bank->non_wakeup_gpios & gpio_bit)) - goto exit; - } - + if (!bank->regs->irqctrl && !omap_gpio_is_off_wakeup_capable(bank, gpio)) { /* * Log the edge gpio and manually trigger the IRQ * after resume if the input level changes @@ -346,7 +356,6 @@ static inline void omap_set_gpio_trigger(struct gpio_bank *bank, int gpio, bank->enabled_non_wakeup_gpios &= ~gpio_bit; } -exit: bank->level_mask = readl_relaxed(bank->base + bank->regs->leveldetect0) | readl_relaxed(bank->base + bank->regs->leveldetect1); diff --git a/drivers/gpio/gpio-vf610.c b/drivers/gpio/gpio-vf610.c index 7e09ce75ffb2..a9cb5571de54 100644 --- a/drivers/gpio/gpio-vf610.c +++ b/drivers/gpio/gpio-vf610.c @@ -37,6 +37,7 @@ struct fsl_gpio_soc_data { struct vf610_gpio_port { struct gpio_chip gc; + struct irq_chip ic; void __iomem *base; void __iomem *gpio_base; const struct fsl_gpio_soc_data *sdata; @@ -66,8 +67,6 @@ struct vf610_gpio_port { #define PORT_INT_EITHER_EDGE 0xb #define PORT_INT_LOGIC_ONE 0xc -static struct irq_chip vf610_gpio_irq_chip; - static const struct fsl_gpio_soc_data imx_data = { .have_paddr = true, }; @@ -243,15 +242,6 @@ static int vf610_gpio_irq_set_wake(struct irq_data *d, u32 enable) return 0; } -static struct irq_chip vf610_gpio_irq_chip = { - .name = "gpio-vf610", - .irq_ack = vf610_gpio_irq_ack, - .irq_mask = vf610_gpio_irq_mask, - .irq_unmask = vf610_gpio_irq_unmask, - .irq_set_type = vf610_gpio_irq_set_type, - .irq_set_wake = vf610_gpio_irq_set_wake, -}; - static int vf610_gpio_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; @@ -259,6 +249,7 @@ static int vf610_gpio_probe(struct platform_device *pdev) struct vf610_gpio_port *port; struct resource *iores; struct gpio_chip *gc; + struct irq_chip *ic; int i; int ret; @@ -295,6 +286,14 @@ static int vf610_gpio_probe(struct platform_device *pdev) gc->direction_output = vf610_gpio_direction_output; gc->set = vf610_gpio_set; + ic = &port->ic; + ic->name = "gpio-vf610"; + ic->irq_ack = vf610_gpio_irq_ack; + ic->irq_mask = vf610_gpio_irq_mask; + ic->irq_unmask = vf610_gpio_irq_unmask; + ic->irq_set_type = vf610_gpio_irq_set_type; + ic->irq_set_wake = vf610_gpio_irq_set_wake; + ret = gpiochip_add_data(gc, port); if (ret < 0) return ret; @@ -306,14 +305,13 @@ static int vf610_gpio_probe(struct platform_device *pdev) /* Clear the interrupt status register for all GPIO's */ vf610_gpio_writel(~0, port->base + PORT_ISFR); - ret = gpiochip_irqchip_add(gc, &vf610_gpio_irq_chip, 0, - handle_edge_irq, IRQ_TYPE_NONE); + ret = gpiochip_irqchip_add(gc, ic, 0, handle_edge_irq, IRQ_TYPE_NONE); if (ret) { dev_err(dev, "failed to add irqchip\n"); gpiochip_remove(gc); return ret; } - gpiochip_set_chained_irqchip(gc, &vf610_gpio_irq_chip, port->irq, + gpiochip_set_chained_irqchip(gc, ic, port->irq, vf610_gpio_irq_handler); return 0; |