aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/ata
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata')
-rw-r--r--drivers/ata/Kconfig1
-rw-r--r--drivers/ata/ahci.c1
-rw-r--r--drivers/ata/ahci_xgene.c14
-rw-r--r--drivers/ata/libahci.c2
-rw-r--r--drivers/ata/libata-core.c36
-rw-r--r--drivers/ata/libata-eh.c1
-rw-r--r--drivers/ata/libata-scsi.c10
-rw-r--r--drivers/ata/libata-sff.c12
-rw-r--r--drivers/ata/sata_dwc_460ex.c26
-rw-r--r--drivers/ata/sata_sil24.c2
10 files changed, 73 insertions, 32 deletions
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index a3a13605a9c4..5f601553b9b0 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -835,6 +835,7 @@ config PATA_AT32
config PATA_AT91
tristate "PATA support for AT91SAM9260"
depends on ARM && SOC_AT91SAM9
+ depends on !ARCH_MULTIPLATFORM
help
This option enables support for IDE devices on the Atmel AT91SAM9260 SoC.
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 49f1e6890587..33bb06e006c9 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -325,7 +325,6 @@ static const struct pci_device_id ahci_pci_tbl[] = {
{ PCI_VDEVICE(INTEL, 0x9d05), board_ahci }, /* Sunrise Point-LP RAID */
{ PCI_VDEVICE(INTEL, 0x9d07), board_ahci }, /* Sunrise Point-LP RAID */
{ PCI_VDEVICE(INTEL, 0xa103), board_ahci }, /* Sunrise Point-H AHCI */
- { PCI_VDEVICE(INTEL, 0xa103), board_ahci }, /* Sunrise Point-H RAID */
{ PCI_VDEVICE(INTEL, 0xa105), board_ahci }, /* Sunrise Point-H RAID */
{ PCI_VDEVICE(INTEL, 0xa107), board_ahci }, /* Sunrise Point-H RAID */
{ PCI_VDEVICE(INTEL, 0xa10f), board_ahci }, /* Sunrise Point-H RAID */
diff --git a/drivers/ata/ahci_xgene.c b/drivers/ata/ahci_xgene.c
index feeb8f1e2fe8..cbcd20810355 100644
--- a/drivers/ata/ahci_xgene.c
+++ b/drivers/ata/ahci_xgene.c
@@ -125,10 +125,11 @@ static int xgene_ahci_restart_engine(struct ata_port *ap)
* xgene_ahci_qc_issue - Issue commands to the device
* @qc: Command to issue
*
- * Due to Hardware errata for IDENTIFY DEVICE command, the controller cannot
- * clear the BSY bit after receiving the PIO setup FIS. This results in the dma
- * state machine goes into the CMFatalErrorUpdate state and locks up. By
- * restarting the dma engine, it removes the controller out of lock up state.
+ * Due to Hardware errata for IDENTIFY DEVICE command and PACKET
+ * command of ATAPI protocol set, the controller cannot clear the BSY bit
+ * after receiving the PIO setup FIS. This results in the DMA state machine
+ * going into the CMFatalErrorUpdate state and locks up. By restarting the
+ * DMA engine, it removes the controller out of lock up state.
*/
static unsigned int xgene_ahci_qc_issue(struct ata_queued_cmd *qc)
{
@@ -137,7 +138,8 @@ static unsigned int xgene_ahci_qc_issue(struct ata_queued_cmd *qc)
struct xgene_ahci_context *ctx = hpriv->plat_data;
int rc = 0;
- if (unlikely(ctx->last_cmd[ap->port_no] == ATA_CMD_ID_ATA))
+ if (unlikely((ctx->last_cmd[ap->port_no] == ATA_CMD_ID_ATA) ||
+ (ctx->last_cmd[ap->port_no] == ATA_CMD_PACKET)))
xgene_ahci_restart_engine(ap);
rc = ahci_qc_issue(qc);
@@ -188,7 +190,7 @@ static unsigned int xgene_ahci_read_id(struct ata_device *dev,
*
* Clear reserved bit 8 (DEVSLP bit) as we don't support DEVSLP
*/
- id[ATA_ID_FEATURE_SUPP] &= ~(1 << 8);
+ id[ATA_ID_FEATURE_SUPP] &= cpu_to_le16(~(1 << 8));
return 0;
}
diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
index 97683e45ab04..61a9c07e0dff 100644
--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
@@ -2003,7 +2003,7 @@ static void ahci_set_aggressive_devslp(struct ata_port *ap, bool sleep)
devslp = readl(port_mmio + PORT_DEVSLP);
if (!(devslp & PORT_DEVSLP_DSP)) {
- dev_err(ap->host->dev, "port does not support device sleep\n");
+ dev_info(ap->host->dev, "port does not support device sleep\n");
return;
}
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 5c84fb5c3372..d1a05f9bb91f 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4233,10 +4233,33 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
{ "PIONEER DVD-RW DVR-216D", NULL, ATA_HORKAGE_NOSETXFER },
/* devices that don't properly handle queued TRIM commands */
- { "Micron_M500*", NULL, ATA_HORKAGE_NO_NCQ_TRIM, },
- { "Crucial_CT???M500SSD*", NULL, ATA_HORKAGE_NO_NCQ_TRIM, },
- { "Micron_M550*", NULL, ATA_HORKAGE_NO_NCQ_TRIM, },
- { "Crucial_CT*M550SSD*", NULL, ATA_HORKAGE_NO_NCQ_TRIM, },
+ { "Micron_M[56]*", NULL, ATA_HORKAGE_NO_NCQ_TRIM |
+ ATA_HORKAGE_ZERO_AFTER_TRIM, },
+ { "Crucial_CT*SSD*", NULL, ATA_HORKAGE_NO_NCQ_TRIM, },
+
+ /*
+ * As defined, the DRAT (Deterministic Read After Trim) and RZAT
+ * (Return Zero After Trim) flags in the ATA Command Set are
+ * unreliable in the sense that they only define what happens if
+ * the device successfully executed the DSM TRIM command. TRIM
+ * is only advisory, however, and the device is free to silently
+ * ignore all or parts of the request.
+ *
+ * Whitelist drives that are known to reliably return zeroes
+ * after TRIM.
+ */
+
+ /*
+ * The intel 510 drive has buggy DRAT/RZAT. Explicitly exclude
+ * that model before whitelisting all other intel SSDs.
+ */
+ { "INTEL*SSDSC2MH*", NULL, 0, },
+
+ { "INTEL*SSD*", NULL, ATA_HORKAGE_ZERO_AFTER_TRIM, },
+ { "SSD*INTEL*", NULL, ATA_HORKAGE_ZERO_AFTER_TRIM, },
+ { "Samsung*SSD*", NULL, ATA_HORKAGE_ZERO_AFTER_TRIM, },
+ { "SAMSUNG*SSD*", NULL, ATA_HORKAGE_ZERO_AFTER_TRIM, },
+ { "ST[1248][0248]0[FH]*", NULL, ATA_HORKAGE_ZERO_AFTER_TRIM, },
/*
* Some WD SATA-I drives spin up and down erratically when the link
@@ -4748,7 +4771,10 @@ static struct ata_queued_cmd *ata_qc_new(struct ata_port *ap)
return NULL;
for (i = 0, tag = ap->last_tag + 1; i < max_queue; i++, tag++) {
- tag = tag < max_queue ? tag : 0;
+ if (ap->flags & ATA_FLAG_LOWTAG)
+ tag = i;
+ else
+ tag = tag < max_queue ? tag : 0;
/* the last tag is reserved for internal command. */
if (tag == ATA_TAG_INTERNAL)
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 3dbec8954c86..8d00c2638bed 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -2389,6 +2389,7 @@ const char *ata_get_cmd_descript(u8 command)
return NULL;
}
+EXPORT_SYMBOL_GPL(ata_get_cmd_descript);
/**
* ata_eh_link_report - report error handling to user
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index e364e86e84d7..6abd17a85b13 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -2532,13 +2532,15 @@ static unsigned int ata_scsiop_read_cap(struct ata_scsi_args *args, u8 *rbuf)
rbuf[15] = lowest_aligned;
if (ata_id_has_trim(args->id)) {
- rbuf[14] |= 0x80; /* TPE */
+ rbuf[14] |= 0x80; /* LBPME */
- if (ata_id_has_zero_after_trim(args->id))
- rbuf[14] |= 0x40; /* TPRZ */
+ if (ata_id_has_zero_after_trim(args->id) &&
+ dev->horkage & ATA_HORKAGE_ZERO_AFTER_TRIM) {
+ ata_dev_info(dev, "Enabling discard_zeroes_data\n");
+ rbuf[14] |= 0x40; /* LBPRZ */
+ }
}
}
-
return 0;
}
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index db90aa35cb71..2e86e3b85266 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -1333,7 +1333,19 @@ void ata_sff_flush_pio_task(struct ata_port *ap)
DPRINTK("ENTER\n");
cancel_delayed_work_sync(&ap->sff_pio_task);
+
+ /*
+ * We wanna reset the HSM state to IDLE. If we do so without
+ * grabbing the port lock, critical sections protected by it which
+ * expect the HSM state to stay stable may get surprised. For
+ * example, we may set IDLE in between the time
+ * __ata_sff_port_intr() checks for HSM_ST_IDLE and before it calls
+ * ata_sff_hsm_move() causing ata_sff_hsm_move() to BUG().
+ */
+ spin_lock_irq(ap->lock);
ap->hsm_task_state = HSM_ST_IDLE;
+ spin_unlock_irq(ap->lock);
+
ap->sff_pio_task_link = NULL;
if (ata_msg_ctl(ap))
diff --git a/drivers/ata/sata_dwc_460ex.c b/drivers/ata/sata_dwc_460ex.c
index c7ddef89e7b0..8e8248179d20 100644
--- a/drivers/ata/sata_dwc_460ex.c
+++ b/drivers/ata/sata_dwc_460ex.c
@@ -797,7 +797,7 @@ static int dma_dwc_init(struct sata_dwc_device *hsdev, int irq)
if (err) {
dev_err(host_pvt.dwc_dev, "%s: dma_request_interrupts returns"
" %d\n", __func__, err);
- goto error_out;
+ return err;
}
/* Enabe DMA */
@@ -808,11 +808,6 @@ static int dma_dwc_init(struct sata_dwc_device *hsdev, int irq)
sata_dma_regs);
return 0;
-
-error_out:
- dma_dwc_exit(hsdev);
-
- return err;
}
static int sata_dwc_scr_read(struct ata_link *link, unsigned int scr, u32 *val)
@@ -1662,7 +1657,7 @@ static int sata_dwc_probe(struct platform_device *ofdev)
char *ver = (char *)&versionr;
u8 *base = NULL;
int err = 0;
- int irq, rc;
+ int irq;
struct ata_host *host;
struct ata_port_info pi = sata_dwc_port_info[0];
const struct ata_port_info *ppi[] = { &pi, NULL };
@@ -1725,7 +1720,7 @@ static int sata_dwc_probe(struct platform_device *ofdev)
if (irq == NO_IRQ) {
dev_err(&ofdev->dev, "no SATA DMA irq\n");
err = -ENODEV;
- goto error_out;
+ goto error_iomap;
}
/* Get physical SATA DMA register base address */
@@ -1734,14 +1729,16 @@ static int sata_dwc_probe(struct platform_device *ofdev)
dev_err(&ofdev->dev, "ioremap failed for AHBDMA register"
" address\n");
err = -ENODEV;
- goto error_out;
+ goto error_iomap;
}
/* Save dev for later use in dev_xxx() routines */
host_pvt.dwc_dev = &ofdev->dev;
/* Initialize AHB DMAC */
- dma_dwc_init(hsdev, irq);
+ err = dma_dwc_init(hsdev, irq);
+ if (err)
+ goto error_dma_iomap;
/* Enable SATA Interrupts */
sata_dwc_enable_interrupts(hsdev);
@@ -1759,9 +1756,8 @@ static int sata_dwc_probe(struct platform_device *ofdev)
* device discovery process, invoking our port_start() handler &
* error_handler() to execute a dummy Softreset EH session
*/
- rc = ata_host_activate(host, irq, sata_dwc_isr, 0, &sata_dwc_sht);
-
- if (rc != 0)
+ err = ata_host_activate(host, irq, sata_dwc_isr, 0, &sata_dwc_sht);
+ if (err)
dev_err(&ofdev->dev, "failed to activate host");
dev_set_drvdata(&ofdev->dev, host);
@@ -1770,7 +1766,8 @@ static int sata_dwc_probe(struct platform_device *ofdev)
error_out:
/* Free SATA DMA resources */
dma_dwc_exit(hsdev);
-
+error_dma_iomap:
+ iounmap((void __iomem *)host_pvt.sata_dma_regs);
error_iomap:
iounmap(base);
error_kmalloc:
@@ -1791,6 +1788,7 @@ static int sata_dwc_remove(struct platform_device *ofdev)
/* Free SATA DMA resources */
dma_dwc_exit(hsdev);
+ iounmap((void __iomem *)host_pvt.sata_dma_regs);
iounmap(hsdev->reg_base);
kfree(hsdev);
kfree(host);
diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c
index d81b20ddb527..ea655949023f 100644
--- a/drivers/ata/sata_sil24.c
+++ b/drivers/ata/sata_sil24.c
@@ -246,7 +246,7 @@ enum {
/* host flags */
SIL24_COMMON_FLAGS = ATA_FLAG_SATA | ATA_FLAG_PIO_DMA |
ATA_FLAG_NCQ | ATA_FLAG_ACPI_SATA |
- ATA_FLAG_AN | ATA_FLAG_PMP,
+ ATA_FLAG_AN | ATA_FLAG_PMP | ATA_FLAG_LOWTAG,
SIL24_FLAG_PCIX_IRQ_WOC = (1 << 24), /* IRQ loss errata on PCI-X */
IRQ_STAT_4PORTS = 0xf,
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-05-01 07:13:31 +0000