diff options
Diffstat (limited to 'drivers/ata/libata-core.c')
-rw-r--r-- | drivers/ata/libata-core.c | 114 |
1 files changed, 95 insertions, 19 deletions
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index db1d86af21b4..2b9f6769f80d 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -2073,7 +2073,7 @@ unsigned int ata_read_log_page(struct ata_device *dev, u8 log, retry: ata_tf_init(dev, &tf); - if (dev->dma_mode && ata_id_has_read_log_dma_ext(dev->id) && + if (ata_dma_enabled(dev) && ata_id_has_read_log_dma_ext(dev->id) && !(dev->horkage & ATA_HORKAGE_NO_DMA_LOG)) { tf.command = ATA_CMD_READ_LOG_DMA_EXT; tf.protocol = ATA_PROT_DMA; @@ -2268,6 +2268,25 @@ static void ata_dev_config_ncq_prio(struct ata_device *dev) } +static bool ata_dev_check_adapter(struct ata_device *dev, + unsigned short vendor_id) +{ + struct pci_dev *pcidev = NULL; + struct device *parent_dev = NULL; + + for (parent_dev = dev->tdev.parent; parent_dev != NULL; + parent_dev = parent_dev->parent) { + if (dev_is_pci(parent_dev)) { + pcidev = to_pci_dev(parent_dev); + if (pcidev->vendor == vendor_id) + return true; + break; + } + } + + return false; +} + static int ata_dev_config_ncq(struct ata_device *dev, char *desc, size_t desc_sz) { @@ -2284,6 +2303,13 @@ static int ata_dev_config_ncq(struct ata_device *dev, snprintf(desc, desc_sz, "NCQ (not used)"); return 0; } + + if (dev->horkage & ATA_HORKAGE_NO_NCQ_ON_ATI && + ata_dev_check_adapter(dev, PCI_VENDOR_ID_ATI)) { + snprintf(desc, desc_sz, "NCQ (not used)"); + return 0; + } + if (ap->flags & ATA_FLAG_NCQ) { hdepth = min(ap->scsi_host->can_queue, ATA_MAX_QUEUE); dev->flags |= ATA_DFLAG_NCQ; @@ -3086,7 +3112,7 @@ int sata_down_spd_limit(struct ata_link *link, u32 spd_limit) */ if (spd > 1) mask &= (1 << (spd - 1)) - 1; - else + else if (link->sata_spd) return -EINVAL; /* were we already at the bottom? */ @@ -3971,10 +3997,23 @@ int sata_link_scr_lpm(struct ata_link *link, enum ata_lpm_policy policy, case ATA_LPM_MED_POWER_WITH_DIPM: case ATA_LPM_MIN_POWER_WITH_PARTIAL: case ATA_LPM_MIN_POWER: - if (ata_link_nr_enabled(link) > 0) - /* no restrictions on LPM transitions */ + if (ata_link_nr_enabled(link) > 0) { + /* assume no restrictions on LPM transitions */ scontrol &= ~(0x7 << 8); - else { + + /* + * If the controller does not support partial, slumber, + * or devsleep, then disallow these transitions. + */ + if (link->ap->host->flags & ATA_HOST_NO_PART) + scontrol |= (0x1 << 8); + + if (link->ap->host->flags & ATA_HOST_NO_SSC) + scontrol |= (0x2 << 8); + + if (link->ap->host->flags & ATA_HOST_NO_DEVSLP) + scontrol |= (0x4 << 8); + } else { /* empty port, power off */ scontrol &= ~0xf; scontrol |= (0x1 << 2); @@ -4427,6 +4466,8 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { { "VRFDFC22048UCHC-TE*", NULL, ATA_HORKAGE_NODMA }, /* Odd clown on sil3726/4726 PMPs */ { "Config Disk", NULL, ATA_HORKAGE_DISABLE }, + /* Similar story with ASMedia 1092 */ + { "ASMT109x- Config", NULL, ATA_HORKAGE_DISABLE }, /* Weird ATAPI devices */ { "TORiSAN DVD-ROM DRD-N216", NULL, ATA_HORKAGE_MAX_SEC_128 }, @@ -4532,6 +4573,10 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { { "PIONEER DVD-RW DVR-212D", NULL, ATA_HORKAGE_NOSETXFER }, { "PIONEER DVD-RW DVR-216D", NULL, ATA_HORKAGE_NOSETXFER }, + /* These specific Pioneer models have LPM issues */ + { "PIONEER BD-RW BDR-207M", NULL, ATA_HORKAGE_NOLPM }, + { "PIONEER BD-RW BDR-205", NULL, ATA_HORKAGE_NOLPM }, + /* Crucial BX100 SSD 500GB has broken LPM support */ { "CT500BX100SSD1", NULL, ATA_HORKAGE_NOLPM }, @@ -4570,15 +4615,25 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { ATA_HORKAGE_ZERO_AFTER_TRIM, }, { "Crucial_CT*MX100*", "MU01", ATA_HORKAGE_NO_NCQ_TRIM | ATA_HORKAGE_ZERO_AFTER_TRIM, }, + { "Samsung SSD 840 EVO*", NULL, ATA_HORKAGE_NO_NCQ_TRIM | + ATA_HORKAGE_NO_DMA_LOG | + ATA_HORKAGE_ZERO_AFTER_TRIM, }, { "Samsung SSD 840*", NULL, ATA_HORKAGE_NO_NCQ_TRIM | ATA_HORKAGE_ZERO_AFTER_TRIM, }, { "Samsung SSD 850*", NULL, ATA_HORKAGE_NO_NCQ_TRIM | ATA_HORKAGE_ZERO_AFTER_TRIM, }, + { "Samsung SSD 860*", NULL, ATA_HORKAGE_NO_NCQ_TRIM | + ATA_HORKAGE_ZERO_AFTER_TRIM | + ATA_HORKAGE_NO_NCQ_ON_ATI, }, + { "Samsung SSD 870*", NULL, ATA_HORKAGE_NO_NCQ_TRIM | + ATA_HORKAGE_ZERO_AFTER_TRIM | + ATA_HORKAGE_NO_NCQ_ON_ATI, }, { "FCCT*M500*", NULL, ATA_HORKAGE_NO_NCQ_TRIM | ATA_HORKAGE_ZERO_AFTER_TRIM, }, /* devices that don't properly handle TRIM commands */ { "SuperSSpeed S238*", NULL, ATA_HORKAGE_NOTRIM, }, + { "M88V29*", NULL, ATA_HORKAGE_NOTRIM, }, /* * As defined, the DRAT (Deterministic Read After Trim) and RZAT @@ -5714,17 +5769,19 @@ static void ata_port_request_pm(struct ata_port *ap, pm_message_t mesg, struct ata_link *link; unsigned long flags; - /* Previous resume operation might still be in - * progress. Wait for PM_PENDING to clear. + spin_lock_irqsave(ap->lock, flags); + + /* + * A previous PM operation might still be in progress. Wait for + * ATA_PFLAG_PM_PENDING to clear. */ if (ap->pflags & ATA_PFLAG_PM_PENDING) { + spin_unlock_irqrestore(ap->lock, flags); ata_port_wait_eh(ap); - WARN_ON(ap->pflags & ATA_PFLAG_PM_PENDING); + spin_lock_irqsave(ap->lock, flags); } - /* request PM ops to EH */ - spin_lock_irqsave(ap->lock, flags); - + /* Request PM operation to EH */ ap->pm_mesg = mesg; ap->pflags |= ATA_PFLAG_PM_PENDING; ata_for_each_link(link, ap, HOST_FIRST) { @@ -5736,10 +5793,8 @@ static void ata_port_request_pm(struct ata_port *ap, pm_message_t mesg, spin_unlock_irqrestore(ap->lock, flags); - if (!async) { + if (!async) ata_port_wait_eh(ap); - WARN_ON(ap->pflags & ATA_PFLAG_PM_PENDING); - } } /* @@ -5905,7 +5960,7 @@ void ata_host_resume(struct ata_host *host) #endif const struct device_type ata_port_type = { - .name = "ata_port", + .name = ATA_PORT_TYPE_NAME, #ifdef CONFIG_PM .pm = &ata_port_pm_ops, #endif @@ -6215,7 +6270,7 @@ struct ata_host *ata_host_alloc_pinfo(struct device *dev, const struct ata_port_info * const * ppi, int n_ports) { - const struct ata_port_info *pi; + const struct ata_port_info *pi = &ata_dummy_port_info; struct ata_host *host; int i, j; @@ -6223,7 +6278,7 @@ struct ata_host *ata_host_alloc_pinfo(struct device *dev, if (!host) return NULL; - for (i = 0, j = 0, pi = NULL; i < host->n_ports; i++) { + for (i = 0, j = 0; i < host->n_ports; i++) { struct ata_port *ap = host->ports[i]; if (ppi[j]) @@ -6412,7 +6467,7 @@ int ata_host_start(struct ata_host *host) have_stop = 1; } - if (host->ops->host_stop) + if (host->ops && host->ops->host_stop) have_stop = 1; if (have_stop) { @@ -6708,11 +6763,30 @@ static void ata_port_detach(struct ata_port *ap) if (!ap->ops->error_handler) goto skip_eh; - /* tell EH we're leaving & flush EH */ + /* Wait for any ongoing EH */ + ata_port_wait_eh(ap); + + mutex_lock(&ap->scsi_scan_mutex); spin_lock_irqsave(ap->lock, flags); + + /* Remove scsi devices */ + ata_for_each_link(link, ap, HOST_FIRST) { + ata_for_each_dev(dev, link, ALL) { + if (dev->sdev) { + spin_unlock_irqrestore(ap->lock, flags); + scsi_remove_device(dev->sdev); + spin_lock_irqsave(ap->lock, flags); + dev->sdev = NULL; + } + } + } + + /* Tell EH to disable all devices */ ap->pflags |= ATA_PFLAG_UNLOADING; ata_port_schedule_eh(ap); + spin_unlock_irqrestore(ap->lock, flags); + mutex_unlock(&ap->scsi_scan_mutex); /* wait till EH commits suicide */ ata_port_wait_eh(ap); @@ -6930,6 +7004,8 @@ static int __init ata_parse_force_one(char **cur, { "ncq", .horkage_off = ATA_HORKAGE_NONCQ }, { "noncqtrim", .horkage_on = ATA_HORKAGE_NO_NCQ_TRIM }, { "ncqtrim", .horkage_off = ATA_HORKAGE_NO_NCQ_TRIM }, + { "noncqati", .horkage_on = ATA_HORKAGE_NO_NCQ_ON_ATI }, + { "ncqati", .horkage_off = ATA_HORKAGE_NO_NCQ_ON_ATI }, { "dump_id", .horkage_on = ATA_HORKAGE_DUMP_ID }, { "pio0", .xfer_mask = 1 << (ATA_SHIFT_PIO + 0) }, { "pio1", .xfer_mask = 1 << (ATA_SHIFT_PIO + 1) }, |