diff options
Diffstat (limited to 'arch/mips/loongson')
23 files changed, 528 insertions, 105 deletions
diff --git a/arch/mips/loongson/Kconfig b/arch/mips/loongson/Kconfig index 1b91fc6a921b..156de85b82cd 100644 --- a/arch/mips/loongson/Kconfig +++ b/arch/mips/loongson/Kconfig @@ -86,6 +86,7 @@ config LOONGSON_MACH3X select LOONGSON_MC146818 select ZONE_DMA32 select LEFI_FIRMWARE_INTERFACE + select PHYS48_TO_HT40 help Generic Loongson 3 family machines utilize the 3A/3B revision of Loongson processor and RS780/SBX00 chipset. @@ -107,6 +108,18 @@ config CS5536_MFGPT If unsure, say Yes. +config RS780_HPET + bool "RS780/SBX00 HPET Timer" + depends on LOONGSON_MACH3X + select MIPS_EXTERNAL_TIMER + help + This option enables the hpet timer of AMD RS780/SBX00. + + If you want to enable the Loongson3 CPUFreq Driver, Please enable + this option at first, otherwise, You will get wrong system time. + + If unsure, say Yes. + config LOONGSON_SUSPEND bool default y @@ -131,6 +144,10 @@ config SWIOTLB select NEED_SG_DMA_LENGTH select NEED_DMA_MAP_STATE +config PHYS48_TO_HT40 + bool + default y if CPU_LOONGSON3 + config LOONGSON_MC146818 bool default n diff --git a/arch/mips/loongson/common/Makefile b/arch/mips/loongson/common/Makefile index 0bb9cc9dc621..d87e03330b29 100644 --- a/arch/mips/loongson/common/Makefile +++ b/arch/mips/loongson/common/Makefile @@ -11,7 +11,8 @@ obj-$(CONFIG_PCI) += pci.o # Serial port support # obj-$(CONFIG_EARLY_PRINTK) += early_printk.o -obj-$(CONFIG_SERIAL_8250) += serial.o +loongson-serial-$(CONFIG_SERIAL_8250) := serial.o +obj-y += $(loongson-serial-m) $(loongson-serial-y) obj-$(CONFIG_LOONGSON_UART_BASE) += uart_base.o obj-$(CONFIG_LOONGSON_MC146818) += rtc.o diff --git a/arch/mips/loongson/common/cs5536/cs5536_pci.c b/arch/mips/loongson/common/cs5536/cs5536_pci.c index 81bed9d18061..b739723205f8 100644 --- a/arch/mips/loongson/common/cs5536/cs5536_pci.c +++ b/arch/mips/loongson/common/cs5536/cs5536_pci.c @@ -21,6 +21,7 @@ */ #include <linux/types.h> +#include <cs5536/cs5536_pci.h> #include <cs5536/cs5536_vsm.h> enum { @@ -35,21 +36,21 @@ enum { }; static const cs5536_pci_vsm_write vsm_conf_write[] = { - [CS5536_ISA_FUNC] pci_isa_write_reg, - [reserved_func] NULL, - [CS5536_IDE_FUNC] pci_ide_write_reg, - [CS5536_ACC_FUNC] pci_acc_write_reg, - [CS5536_OHCI_FUNC] pci_ohci_write_reg, - [CS5536_EHCI_FUNC] pci_ehci_write_reg, + [CS5536_ISA_FUNC] = pci_isa_write_reg, + [reserved_func] = NULL, + [CS5536_IDE_FUNC] = pci_ide_write_reg, + [CS5536_ACC_FUNC] = pci_acc_write_reg, + [CS5536_OHCI_FUNC] = pci_ohci_write_reg, + [CS5536_EHCI_FUNC] = pci_ehci_write_reg, }; static const cs5536_pci_vsm_read vsm_conf_read[] = { - [CS5536_ISA_FUNC] pci_isa_read_reg, - [reserved_func] NULL, - [CS5536_IDE_FUNC] pci_ide_read_reg, - [CS5536_ACC_FUNC] pci_acc_read_reg, - [CS5536_OHCI_FUNC] pci_ohci_read_reg, - [CS5536_EHCI_FUNC] pci_ehci_read_reg, + [CS5536_ISA_FUNC] = pci_isa_read_reg, + [reserved_func] = NULL, + [CS5536_IDE_FUNC] = pci_ide_read_reg, + [CS5536_ACC_FUNC] = pci_acc_read_reg, + [CS5536_OHCI_FUNC] = pci_ohci_read_reg, + [CS5536_EHCI_FUNC] = pci_ehci_read_reg, }; /* diff --git a/arch/mips/loongson/common/dma-swiotlb.c b/arch/mips/loongson/common/dma-swiotlb.c index c2be01f91575..2c6b989c1bc4 100644 --- a/arch/mips/loongson/common/dma-swiotlb.c +++ b/arch/mips/loongson/common/dma-swiotlb.c @@ -105,11 +105,25 @@ static int loongson_dma_set_mask(struct device *dev, u64 mask) dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr) { + long nid; +#ifdef CONFIG_PHYS48_TO_HT40 + /* We extract 2bit node id (bit 44~47, only bit 44~45 used now) from + * Loongson-3's 48bit address space and embed it into 40bit */ + nid = (paddr >> 44) & 0x3; + paddr = ((nid << 44) ^ paddr) | (nid << 37); +#endif return paddr; } phys_addr_t dma_to_phys(struct device *dev, dma_addr_t daddr) { + long nid; +#ifdef CONFIG_PHYS48_TO_HT40 + /* We extract 2bit node id (bit 44~47, only bit 44~45 used now) from + * Loongson-3's 48bit address space and embed it into 40bit */ + nid = (daddr >> 37) & 0x3; + daddr = ((nid << 37) ^ daddr) | (nid << 44); +#endif return daddr; } diff --git a/arch/mips/loongson/common/early_printk.c b/arch/mips/loongson/common/early_printk.c index ced461b39069..6ca632e529dc 100644 --- a/arch/mips/loongson/common/early_printk.c +++ b/arch/mips/loongson/common/early_printk.c @@ -30,7 +30,7 @@ void prom_putchar(char c) int timeout; unsigned char *uart_base; - uart_base = (unsigned char *)_loongson_uart_base; + uart_base = (unsigned char *)_loongson_uart_base[0]; timeout = 1024; while (((serial_in(uart_base, UART_LSR) & UART_LSR_THRE) == 0) && diff --git a/arch/mips/loongson/common/env.c b/arch/mips/loongson/common/env.c index f15228550a22..045ea3d47c87 100644 --- a/arch/mips/loongson/common/env.c +++ b/arch/mips/loongson/common/env.c @@ -21,6 +21,7 @@ #include <asm/bootinfo.h> #include <loongson.h> #include <boot_param.h> +#include <workarounds.h> u32 cpu_clock_freq; EXPORT_SYMBOL(cpu_clock_freq); @@ -31,7 +32,6 @@ u64 loongson_chipcfg[MAX_PACKAGES] = {0xffffffffbfc00180}; u64 loongson_freqctrl[MAX_PACKAGES]; unsigned long long smp_group[4]; -int cpuhotplug_workaround = 0; #define parse_even_earlier(res, option, p) \ do { \ @@ -67,6 +67,7 @@ void __init prom_init_env(void) #else struct boot_params *boot_p; struct loongson_params *loongson_p; + struct system_loongson *esys; struct efi_cpuinfo_loongson *ecpu; struct irq_source_routing_table *eirq_source; @@ -74,6 +75,8 @@ void __init prom_init_env(void) boot_p = (struct boot_params *)fw_arg2; loongson_p = &(boot_p->efi.smbios.lp); + esys = (struct system_loongson *) + ((u64)loongson_p + loongson_p->system_offset); ecpu = (struct efi_cpuinfo_loongson *) ((u64)loongson_p + loongson_p->cpu_offset); eirq_source = (struct irq_source_routing_table *) @@ -95,6 +98,7 @@ void __init prom_init_env(void) loongson_chipcfg[2] = 0x900020001fe00180; loongson_chipcfg[3] = 0x900030001fe00180; loongson_sysconf.ht_control_base = 0x90000EFDFB000000; + loongson_sysconf.workarounds = WORKAROUND_CPUFREQ; } else if (ecpu->cputype == Loongson_3B) { loongson_sysconf.cores_per_node = 4; /* One chip has 2 nodes */ loongson_sysconf.cores_per_package = 8; @@ -111,7 +115,7 @@ void __init prom_init_env(void) loongson_freqctrl[2] = 0x900040001fe001d0; loongson_freqctrl[3] = 0x900060001fe001d0; loongson_sysconf.ht_control_base = 0x90001EFDFB000000; - cpuhotplug_workaround = 1; + loongson_sysconf.workarounds = WORKAROUND_CPUHOTPLUG; } else { loongson_sysconf.cores_per_node = 1; loongson_sysconf.cores_per_package = 1; @@ -119,6 +123,8 @@ void __init prom_init_env(void) } loongson_sysconf.nr_cpus = ecpu->nr_cpus; + loongson_sysconf.boot_cpu_id = ecpu->cpu_startup_core_id; + loongson_sysconf.reserved_cpus_mask = ecpu->reserved_cores_mask; if (ecpu->nr_cpus > NR_CPUS || ecpu->nr_cpus == 0) loongson_sysconf.nr_cpus = NR_CPUS; loongson_sysconf.nr_nodes = (loongson_sysconf.nr_cpus + @@ -141,6 +147,24 @@ void __init prom_init_env(void) pr_debug("Shutdown Addr: %llx, Restart Addr: %llx, VBIOS Addr: %llx\n", loongson_sysconf.poweroff_addr, loongson_sysconf.restart_addr, loongson_sysconf.vgabios_addr); + + memset(loongson_sysconf.ecname, 0, 32); + if (esys->has_ec) + memcpy(loongson_sysconf.ecname, esys->ec_name, 32); + loongson_sysconf.workarounds |= esys->workarounds; + + loongson_sysconf.nr_uarts = esys->nr_uarts; + if (esys->nr_uarts < 1 || esys->nr_uarts > MAX_UARTS) + loongson_sysconf.nr_uarts = 1; + memcpy(loongson_sysconf.uarts, esys->uarts, + sizeof(struct uart_device) * loongson_sysconf.nr_uarts); + + loongson_sysconf.nr_sensors = esys->nr_sensors; + if (loongson_sysconf.nr_sensors > MAX_SENSORS) + loongson_sysconf.nr_sensors = 0; + if (loongson_sysconf.nr_sensors) + memcpy(loongson_sysconf.sensors, esys->sensors, + sizeof(struct sensor_device) * loongson_sysconf.nr_sensors); #endif if (cpu_clock_freq == 0) { processor_id = (¤t_cpu_data)->processor_id; diff --git a/arch/mips/loongson/common/gpio.c b/arch/mips/loongson/common/gpio.c index 21869908aaa4..29dbaa253061 100644 --- a/arch/mips/loongson/common/gpio.c +++ b/arch/mips/loongson/common/gpio.c @@ -37,7 +37,7 @@ int gpio_get_value(unsigned gpio) val = LOONGSON_GPIODATA; spin_unlock(&gpio_lock); - return ((val & mask) != 0); + return (val & mask) != 0; } EXPORT_SYMBOL(gpio_get_value); diff --git a/arch/mips/loongson/common/init.c b/arch/mips/loongson/common/init.c index f6af3aba4c86..9b987fe98b5b 100644 --- a/arch/mips/loongson/common/init.c +++ b/arch/mips/loongson/common/init.c @@ -9,6 +9,7 @@ */ #include <linux/bootmem.h> +#include <asm/bootinfo.h> #include <asm/smp-ops.h> #include <loongson.h> diff --git a/arch/mips/loongson/common/machtype.c b/arch/mips/loongson/common/machtype.c index 1a4797984b8d..f2807bc662a3 100644 --- a/arch/mips/loongson/common/machtype.c +++ b/arch/mips/loongson/common/machtype.c @@ -19,19 +19,16 @@ #define MACHTYPE_LEN 50 static const char *system_types[] = { - [MACH_LOONGSON_UNKNOWN] "unknown loongson machine", - [MACH_LEMOTE_FL2E] "lemote-fuloong-2e-box", - [MACH_LEMOTE_FL2F] "lemote-fuloong-2f-box", - [MACH_LEMOTE_ML2F7] "lemote-mengloong-2f-7inches", - [MACH_LEMOTE_YL2F89] "lemote-yeeloong-2f-8.9inches", - [MACH_DEXXON_GDIUM2F10] "dexxon-gdium-2f", - [MACH_LEMOTE_NAS] "lemote-nas-2f", - [MACH_LEMOTE_LL2F] "lemote-lynloong-2f", - [MACH_LEMOTE_A1004] "lemote-3a-notebook-a1004", - [MACH_LEMOTE_A1101] "lemote-3a-itx-a1101", - [MACH_LEMOTE_A1201] "lemote-2gq-notebook-a1201", - [MACH_LEMOTE_A1205] "lemote-2gq-aio-a1205", - [MACH_LOONGSON_END] NULL, + [MACH_LOONGSON_UNKNOWN] = "unknown loongson machine", + [MACH_LEMOTE_FL2E] = "lemote-fuloong-2e-box", + [MACH_LEMOTE_FL2F] = "lemote-fuloong-2f-box", + [MACH_LEMOTE_ML2F7] = "lemote-mengloong-2f-7inches", + [MACH_LEMOTE_YL2F89] = "lemote-yeeloong-2f-8.9inches", + [MACH_DEXXON_GDIUM2F10] = "dexxon-gdium-2f", + [MACH_LEMOTE_NAS] = "lemote-nas-2f", + [MACH_LEMOTE_LL2F] = "lemote-lynloong-2f", + [MACH_LOONGSON_GENERIC] = "generic-loongson-machine", + [MACH_LOONGSON_END] = NULL, }; const char *get_system_type(void) diff --git a/arch/mips/loongson/common/rtc.c b/arch/mips/loongson/common/rtc.c index a90d87c01555..b5709af09f7f 100644 --- a/arch/mips/loongson/common/rtc.c +++ b/arch/mips/loongson/common/rtc.c @@ -14,7 +14,7 @@ #include <linux/platform_device.h> #include <linux/mc146818rtc.h> -struct resource loongson_rtc_resources[] = { +static struct resource loongson_rtc_resources[] = { { .start = RTC_PORT(0), .end = RTC_PORT(1), diff --git a/arch/mips/loongson/common/serial.c b/arch/mips/loongson/common/serial.c index bd2b7095b6dc..c23fa1373729 100644 --- a/arch/mips/loongson/common/serial.c +++ b/arch/mips/loongson/common/serial.c @@ -38,20 +38,17 @@ .regshift = 0, \ } -static struct plat_serial8250_port uart8250_data[][2] = { - [MACH_LOONGSON_UNKNOWN] {}, - [MACH_LEMOTE_FL2E] {PORT(4, 1843200), {} }, - [MACH_LEMOTE_FL2F] {PORT(3, 1843200), {} }, - [MACH_LEMOTE_ML2F7] {PORT_M(3, 3686400), {} }, - [MACH_LEMOTE_YL2F89] {PORT_M(3, 3686400), {} }, - [MACH_DEXXON_GDIUM2F10] {PORT_M(3, 3686400), {} }, - [MACH_LEMOTE_NAS] {PORT_M(3, 3686400), {} }, - [MACH_LEMOTE_LL2F] {PORT(3, 1843200), {} }, - [MACH_LEMOTE_A1004] {PORT_M(2, 33177600), {} }, - [MACH_LEMOTE_A1101] {PORT_M(2, 25000000), {} }, - [MACH_LEMOTE_A1201] {PORT_M(2, 25000000), {} }, - [MACH_LEMOTE_A1205] {PORT_M(2, 25000000), {} }, - [MACH_LOONGSON_END] {}, +static struct plat_serial8250_port uart8250_data[][MAX_UARTS + 1] = { + [MACH_LOONGSON_UNKNOWN] = {}, + [MACH_LEMOTE_FL2E] = {PORT(4, 1843200), {} }, + [MACH_LEMOTE_FL2F] = {PORT(3, 1843200), {} }, + [MACH_LEMOTE_ML2F7] = {PORT_M(3, 3686400), {} }, + [MACH_LEMOTE_YL2F89] = {PORT_M(3, 3686400), {} }, + [MACH_DEXXON_GDIUM2F10] = {PORT_M(3, 3686400), {} }, + [MACH_LEMOTE_NAS] = {PORT_M(3, 3686400), {} }, + [MACH_LEMOTE_LL2F] = {PORT(3, 1843200), {} }, + [MACH_LOONGSON_GENERIC] = {PORT_M(2, 25000000), {} }, + [MACH_LOONGSON_END] = {}, }; static struct platform_device uart8250_device = { @@ -61,17 +58,52 @@ static struct platform_device uart8250_device = { static int __init serial_init(void) { + int i; unsigned char iotype; iotype = uart8250_data[mips_machtype][0].iotype; - if (UPIO_MEM == iotype) + if (UPIO_MEM == iotype) { + uart8250_data[mips_machtype][0].mapbase = + loongson_uart_base[0]; uart8250_data[mips_machtype][0].membase = - (void __iomem *)_loongson_uart_base; + (void __iomem *)_loongson_uart_base[0]; + } else if (UPIO_PORT == iotype) uart8250_data[mips_machtype][0].iobase = - loongson_uart_base - LOONGSON_PCIIO_BASE; + loongson_uart_base[0] - LOONGSON_PCIIO_BASE; + if (loongson_sysconf.uarts[0].uartclk) + uart8250_data[mips_machtype][0].uartclk = + loongson_sysconf.uarts[0].uartclk; + + for (i = 1; i < loongson_sysconf.nr_uarts; i++) { + iotype = loongson_sysconf.uarts[i].iotype; + uart8250_data[mips_machtype][i].iotype = iotype; + loongson_uart_base[i] = loongson_sysconf.uarts[i].uart_base; + + if (UPIO_MEM == iotype) { + uart8250_data[mips_machtype][i].irq = + MIPS_CPU_IRQ_BASE + loongson_sysconf.uarts[i].int_offset; + uart8250_data[mips_machtype][i].mapbase = + loongson_uart_base[i]; + uart8250_data[mips_machtype][i].membase = + ioremap_nocache(loongson_uart_base[i], 8); + } else if (UPIO_PORT == iotype) { + uart8250_data[mips_machtype][i].irq = + loongson_sysconf.uarts[i].int_offset; + uart8250_data[mips_machtype][i].iobase = + loongson_uart_base[i] - LOONGSON_PCIIO_BASE; + } + + uart8250_data[mips_machtype][i].uartclk = + loongson_sysconf.uarts[i].uartclk; + uart8250_data[mips_machtype][i].flags = + UPF_BOOT_AUTOCONF | UPF_SKIP_TEST; + } + + memset(&uart8250_data[mips_machtype][loongson_sysconf.nr_uarts], + 0, sizeof(struct plat_serial8250_port)); uart8250_device.dev.platform_data = uart8250_data[mips_machtype]; return platform_device_register(&uart8250_device); diff --git a/arch/mips/loongson/common/setup.c b/arch/mips/loongson/common/setup.c index bb4ac922e47a..d477dd6bb326 100644 --- a/arch/mips/loongson/common/setup.c +++ b/arch/mips/loongson/common/setup.c @@ -10,6 +10,7 @@ #include <linux/module.h> #include <asm/wbflush.h> +#include <asm/bootinfo.h> #include <loongson.h> diff --git a/arch/mips/loongson/common/time.c b/arch/mips/loongson/common/time.c index 262a1f65b05e..e1a5382ad47e 100644 --- a/arch/mips/loongson/common/time.c +++ b/arch/mips/loongson/common/time.c @@ -12,6 +12,7 @@ */ #include <asm/mc146818-time.h> #include <asm/time.h> +#include <asm/hpet.h> #include <loongson.h> #include <cs5536/cs5536_mfgpt.h> @@ -21,7 +22,11 @@ void __init plat_time_init(void) /* setup mips r4k timer */ mips_hpt_frequency = cpu_clock_freq / 2; +#ifdef CONFIG_RS780_HPET + setup_hpet_timer(); +#else setup_mfgpt0_timer(); +#endif } void read_persistent_clock(struct timespec *ts) diff --git a/arch/mips/loongson/common/uart_base.c b/arch/mips/loongson/common/uart_base.c index 1e1eeea73fde..9de559d58e1f 100644 --- a/arch/mips/loongson/common/uart_base.c +++ b/arch/mips/loongson/common/uart_base.c @@ -13,22 +13,27 @@ #include <loongson.h> -/* ioremapped */ -unsigned long _loongson_uart_base; -EXPORT_SYMBOL(_loongson_uart_base); /* raw */ -unsigned long loongson_uart_base; +unsigned long loongson_uart_base[MAX_UARTS] = {}; +/* ioremapped */ +unsigned long _loongson_uart_base[MAX_UARTS] = {}; + EXPORT_SYMBOL(loongson_uart_base); +EXPORT_SYMBOL(_loongson_uart_base); void prom_init_loongson_uart_base(void) { switch (mips_machtype) { + case MACH_LOONGSON_GENERIC: + /* The CPU provided serial port (CPU) */ + loongson_uart_base[0] = LOONGSON_REG_BASE + 0x1e0; + break; case MACH_LEMOTE_FL2E: - loongson_uart_base = LOONGSON_PCIIO_BASE + 0x3f8; + loongson_uart_base[0] = LOONGSON_PCIIO_BASE + 0x3f8; break; case MACH_LEMOTE_FL2F: case MACH_LEMOTE_LL2F: - loongson_uart_base = LOONGSON_PCIIO_BASE + 0x2f8; + loongson_uart_base[0] = LOONGSON_PCIIO_BASE + 0x2f8; break; case MACH_LEMOTE_ML2F7: case MACH_LEMOTE_YL2F89: @@ -36,17 +41,10 @@ void prom_init_loongson_uart_base(void) case MACH_LEMOTE_NAS: default: /* The CPU provided serial port (LPC) */ - loongson_uart_base = LOONGSON_LIO1_BASE + 0x3f8; - break; - case MACH_LEMOTE_A1004: - case MACH_LEMOTE_A1101: - case MACH_LEMOTE_A1201: - case MACH_LEMOTE_A1205: - /* The CPU provided serial port (CPU) */ - loongson_uart_base = LOONGSON_REG_BASE + 0x1e0; + loongson_uart_base[0] = LOONGSON_LIO1_BASE + 0x3f8; break; } - _loongson_uart_base = - (unsigned long)ioremap_nocache(loongson_uart_base, 8); + _loongson_uart_base[0] = + (unsigned long)ioremap_nocache(loongson_uart_base[0], 8); } diff --git a/arch/mips/loongson/lemote-2f/clock.c b/arch/mips/loongson/lemote-2f/clock.c index a217061beee3..462e34d46b4a 100644 --- a/arch/mips/loongson/lemote-2f/clock.c +++ b/arch/mips/loongson/lemote-2f/clock.c @@ -91,6 +91,7 @@ EXPORT_SYMBOL(clk_put); int clk_set_rate(struct clk *clk, unsigned long rate) { + unsigned int rate_khz = rate / 1000; struct cpufreq_frequency_table *pos; int ret = 0; int regval; @@ -107,9 +108,9 @@ int clk_set_rate(struct clk *clk, unsigned long rate) propagate_rate(clk); cpufreq_for_each_valid_entry(pos, loongson2_clockmod_table) - if (rate == pos->frequency) + if (rate_khz == pos->frequency) break; - if (rate != pos->frequency) + if (rate_khz != pos->frequency) return -ENOTSUPP; clk->rate = rate; diff --git a/arch/mips/loongson/lemote-2f/irq.c b/arch/mips/loongson/lemote-2f/irq.c index 6f8682e44483..cab5f43e0e29 100644 --- a/arch/mips/loongson/lemote-2f/irq.c +++ b/arch/mips/loongson/lemote-2f/irq.c @@ -93,13 +93,13 @@ static irqreturn_t ip6_action(int cpl, void *dev_id) return IRQ_HANDLED; } -struct irqaction ip6_irqaction = { +static struct irqaction ip6_irqaction = { .handler = ip6_action, .name = "cascade", .flags = IRQF_SHARED | IRQF_NO_THREAD, }; -struct irqaction cascade_irqaction = { +static struct irqaction cascade_irqaction = { .handler = no_action, .name = "cascade", .flags = IRQF_NO_THREAD, diff --git a/arch/mips/loongson/lemote-2f/reset.c b/arch/mips/loongson/lemote-2f/reset.c index 79ac694fe744..a26ca7fcd7e0 100644 --- a/arch/mips/loongson/lemote-2f/reset.c +++ b/arch/mips/loongson/lemote-2f/reset.c @@ -76,7 +76,7 @@ static void fl2f_shutdown(void) /* reset support for yeeloong2f and mengloong2f notebook */ -void ml2f_reboot(void) +static void ml2f_reboot(void) { reset_cpu(); diff --git a/arch/mips/loongson/loongson-3/Makefile b/arch/mips/loongson/loongson-3/Makefile index b4df775b9f30..622fead5ebc9 100644 --- a/arch/mips/loongson/loongson-3/Makefile +++ b/arch/mips/loongson/loongson-3/Makefile @@ -1,8 +1,10 @@ # # Makefile for Loongson-3 family machines # -obj-y += irq.o cop2-ex.o +obj-y += irq.o cop2-ex.o platform.o obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_NUMA) += numa.o + +obj-$(CONFIG_RS780_HPET) += hpet.o diff --git a/arch/mips/loongson/loongson-3/hpet.c b/arch/mips/loongson/loongson-3/hpet.c new file mode 100644 index 000000000000..e898d68668a9 --- /dev/null +++ b/arch/mips/loongson/loongson-3/hpet.c @@ -0,0 +1,257 @@ +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/percpu.h> +#include <linux/delay.h> +#include <linux/spinlock.h> +#include <linux/interrupt.h> + +#include <asm/hpet.h> +#include <asm/time.h> + +#define SMBUS_CFG_BASE (loongson_sysconf.ht_control_base + 0x0300a000) +#define SMBUS_PCI_REG40 0x40 +#define SMBUS_PCI_REG64 0x64 +#define SMBUS_PCI_REGB4 0xb4 + +static DEFINE_SPINLOCK(hpet_lock); +DEFINE_PER_CPU(struct clock_event_device, hpet_clockevent_device); + +static unsigned int smbus_read(int offset) +{ + return *(volatile unsigned int *)(SMBUS_CFG_BASE + offset); +} + +static void smbus_write(int offset, int data) +{ + *(volatile unsigned int *)(SMBUS_CFG_BASE + offset) = data; +} + +static void smbus_enable(int offset, int bit) +{ + unsigned int cfg = smbus_read(offset); + + cfg |= bit; + smbus_write(offset, cfg); +} + +static int hpet_read(int offset) +{ + return *(volatile unsigned int *)(HPET_MMIO_ADDR + offset); +} + +static void hpet_write(int offset, int data) +{ + *(volatile unsigned int *)(HPET_MMIO_ADDR + offset) = data; +} + +static void hpet_start_counter(void) +{ + unsigned int cfg = hpet_read(HPET_CFG); + + cfg |= HPET_CFG_ENABLE; + hpet_write(HPET_CFG, cfg); +} + +static void hpet_stop_counter(void) +{ + unsigned int cfg = hpet_read(HPET_CFG); + + cfg &= ~HPET_CFG_ENABLE; + hpet_write(HPET_CFG, cfg); +} + +static void hpet_reset_counter(void) +{ + hpet_write(HPET_COUNTER, 0); + hpet_write(HPET_COUNTER + 4, 0); +} + +static void hpet_restart_counter(void) +{ + hpet_stop_counter(); + hpet_reset_counter(); + hpet_start_counter(); +} + +static void hpet_enable_legacy_int(void) +{ + /* Do nothing on Loongson-3 */ +} + +static void hpet_set_mode(enum clock_event_mode mode, + struct clock_event_device *evt) +{ + int cfg = 0; + + spin_lock(&hpet_lock); + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + pr_info("set clock event to periodic mode!\n"); + /* stop counter */ + hpet_stop_counter(); + + /* enables the timer0 to generate a periodic interrupt */ + cfg = hpet_read(HPET_T0_CFG); + cfg &= ~HPET_TN_LEVEL; + cfg |= HPET_TN_ENABLE | HPET_TN_PERIODIC | + HPET_TN_SETVAL | HPET_TN_32BIT; + hpet_write(HPET_T0_CFG, cfg); + + /* set the comparator */ + hpet_write(HPET_T0_CMP, HPET_COMPARE_VAL); + udelay(1); + hpet_write(HPET_T0_CMP, HPET_COMPARE_VAL); + + /* start counter */ + hpet_start_counter(); + break; + case CLOCK_EVT_MODE_SHUTDOWN: + case CLOCK_EVT_MODE_UNUSED: + cfg = hpet_read(HPET_T0_CFG); + cfg &= ~HPET_TN_ENABLE; + hpet_write(HPET_T0_CFG, cfg); + break; + case CLOCK_EVT_MODE_ONESHOT: + pr_info("set clock event to one shot mode!\n"); + cfg = hpet_read(HPET_T0_CFG); + /* set timer0 type + * 1 : periodic interrupt + * 0 : non-periodic(oneshot) interrupt + */ + cfg &= ~HPET_TN_PERIODIC; + cfg |= HPET_TN_ENABLE | HPET_TN_32BIT; + hpet_write(HPET_T0_CFG, cfg); + break; + case CLOCK_EVT_MODE_RESUME: + hpet_enable_legacy_int(); + break; + } + spin_unlock(&hpet_lock); +} + +static int hpet_next_event(unsigned long delta, + struct clock_event_device *evt) +{ + unsigned int cnt; + int res; + + cnt = hpet_read(HPET_COUNTER); + cnt += delta; + hpet_write(HPET_T0_CMP, cnt); + + res = ((int)(hpet_read(HPET_COUNTER) - cnt) > 0) ? -ETIME : 0; + return res; +} + +static irqreturn_t hpet_irq_handler(int irq, void *data) +{ + int is_irq; + struct clock_event_device *cd; + unsigned int cpu = smp_processor_id(); + + is_irq = hpet_read(HPET_STATUS); + if (is_irq & HPET_T0_IRS) { + /* clear the TIMER0 irq status register */ + hpet_write(HPET_STATUS, HPET_T0_IRS); + cd = &per_cpu(hpet_clockevent_device, cpu); + cd->event_handler(cd); + return IRQ_HANDLED; + } + return IRQ_NONE; +} + +static struct irqaction hpet_irq = { + .handler = hpet_irq_handler, + .flags = IRQF_DISABLED | IRQF_NOBALANCING | IRQF_TIMER, + .name = "hpet", +}; + +/* + * hpet address assignation and irq setting should be done in bios. + * but pmon don't do this, we just setup here directly. + * The operation under is normal. unfortunately, hpet_setup process + * is before pci initialize. + * + * { + * struct pci_dev *pdev; + * + * pdev = pci_get_device(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS, NULL); + * pci_write_config_word(pdev, SMBUS_PCI_REGB4, HPET_ADDR); + * + * ... + * } + */ +static void hpet_setup(void) +{ + /* set hpet base address */ + smbus_write(SMBUS_PCI_REGB4, HPET_ADDR); + + /* enable decodeing of access to HPET MMIO*/ + smbus_enable(SMBUS_PCI_REG40, (1 << 28)); + + /* HPET irq enable */ + smbus_enable(SMBUS_PCI_REG64, (1 << 10)); + + hpet_enable_legacy_int(); +} + +void __init setup_hpet_timer(void) +{ + unsigned int cpu = smp_processor_id(); + struct clock_event_device *cd; + + hpet_setup(); + + cd = &per_cpu(hpet_clockevent_device, cpu); + cd->name = "hpet"; + cd->rating = 320; + cd->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT; + cd->set_mode = hpet_set_mode; + cd->set_next_event = hpet_next_event; + cd->irq = HPET_T0_IRQ; + cd->cpumask = cpumask_of(cpu); + clockevent_set_clock(cd, HPET_FREQ); + cd->max_delta_ns = clockevent_delta2ns(0x7fffffff, cd); + cd->min_delta_ns = 5000; + + clockevents_register_device(cd); + setup_irq(HPET_T0_IRQ, &hpet_irq); + pr_info("hpet clock event device register\n"); +} + +static cycle_t hpet_read_counter(struct clocksource *cs) +{ + return (cycle_t)hpet_read(HPET_COUNTER); +} + +static void hpet_suspend(struct clocksource *cs) +{ +} + +static void hpet_resume(struct clocksource *cs) +{ + hpet_setup(); + hpet_restart_counter(); +} + +static struct clocksource csrc_hpet = { + .name = "hpet", + /* mips clocksource rating is less than 300, so hpet is better. */ + .rating = 300, + .read = hpet_read_counter, + .mask = CLOCKSOURCE_MASK(32), + /* oneshot mode work normal with this flag */ + .flags = CLOCK_SOURCE_IS_CONTINUOUS, + .suspend = hpet_suspend, + .resume = hpet_resume, + .mult = 0, + .shift = 10, +}; + +int __init init_hpet_clocksource(void) +{ + csrc_hpet.mult = clocksource_hz2mult(HPET_FREQ, csrc_hpet.shift); + return clocksource_register_hz(&csrc_hpet, HPET_FREQ); +} + +arch_initcall(init_hpet_clocksource); diff --git a/arch/mips/loongson/loongson-3/irq.c b/arch/mips/loongson/loongson-3/irq.c index ca1c62af5188..21221edda7a9 100644 --- a/arch/mips/loongson/loongson-3/irq.c +++ b/arch/mips/loongson/loongson-3/irq.c @@ -9,7 +9,7 @@ #include "smp.h" -unsigned int ht_irq[] = {1, 3, 4, 5, 6, 7, 8, 12, 14, 15}; +unsigned int ht_irq[] = {0, 1, 3, 4, 5, 6, 7, 8, 12, 14, 15}; static void ht_irqdispatch(void) { @@ -55,8 +55,8 @@ static inline void mask_loongson_irq(struct irq_data *d) /* Workaround: UART IRQ may deliver to any core */ if (d->irq == LOONGSON_UART_IRQ) { int cpu = smp_processor_id(); - int node_id = cpu / loongson_sysconf.cores_per_node; - int core_id = cpu % loongson_sysconf.cores_per_node; + int node_id = cpu_logical_map(cpu) / loongson_sysconf.cores_per_node; + int core_id = cpu_logical_map(cpu) % loongson_sysconf.cores_per_node; u64 intenclr_addr = smp_group[node_id] | (u64)(&LOONGSON_INT_ROUTER_INTENCLR); u64 introuter_lpc_addr = smp_group[node_id] | @@ -72,8 +72,8 @@ static inline void unmask_loongson_irq(struct irq_data *d) /* Workaround: UART IRQ may deliver to any core */ if (d->irq == LOONGSON_UART_IRQ) { int cpu = smp_processor_id(); - int node_id = cpu / loongson_sysconf.cores_per_node; - int core_id = cpu % loongson_sysconf.cores_per_node; + int node_id = cpu_logical_map(cpu) / loongson_sysconf.cores_per_node; + int core_id = cpu_logical_map(cpu) % loongson_sysconf.cores_per_node; u64 intenset_addr = smp_group[node_id] | (u64)(&LOONGSON_INT_ROUTER_INTENSET); u64 introuter_lpc_addr = smp_group[node_id] | @@ -102,10 +102,12 @@ void irq_router_init(void) int i; /* route LPC int to cpu core0 int 0 */ - LOONGSON_INT_ROUTER_LPC = LOONGSON_INT_CORE0_INT0; + LOONGSON_INT_ROUTER_LPC = + LOONGSON_INT_COREx_INTy(loongson_sysconf.boot_cpu_id, 0); /* route HT1 int0 ~ int7 to cpu core0 INT1*/ for (i = 0; i < 8; i++) - LOONGSON_INT_ROUTER_HT1(i) = LOONGSON_INT_CORE0_INT1; + LOONGSON_INT_ROUTER_HT1(i) = + LOONGSON_INT_COREx_INTy(loongson_sysconf.boot_cpu_id, 1); /* enable HT1 interrupt */ LOONGSON_HT1_INTN_EN(0) = 0xffffffff; /* enable router interrupt intenset */ diff --git a/arch/mips/loongson/loongson-3/numa.c b/arch/mips/loongson/loongson-3/numa.c index 37ed184398c6..6cae0e75de27 100644 --- a/arch/mips/loongson/loongson-3/numa.c +++ b/arch/mips/loongson/loongson-3/numa.c @@ -33,6 +33,7 @@ static struct node_data prealloc__node_data[MAX_NUMNODES]; unsigned char __node_distances[MAX_NUMNODES][MAX_NUMNODES]; +EXPORT_SYMBOL(__node_distances); struct node_data *__node_data[MAX_NUMNODES]; EXPORT_SYMBOL(__node_data); @@ -223,7 +224,7 @@ static void __init node_mem_init(unsigned int node) static __init void prom_meminit(void) { - unsigned int node, cpu; + unsigned int node, cpu, active_cpu = 0; cpu_node_probe(); init_topology_matrix(); @@ -239,8 +240,14 @@ static __init void prom_meminit(void) node = cpu / loongson_sysconf.cores_per_node; if (node >= num_online_nodes()) node = 0; - pr_info("NUMA: set cpumask cpu %d on node %d\n", cpu, node); - cpu_set(cpu, __node_data[(node)]->cpumask); + + if (loongson_sysconf.reserved_cpus_mask & (1<<cpu)) + continue; + + cpu_set(active_cpu, __node_data[(node)]->cpumask); + pr_info("NUMA: set cpumask cpu %d on node %d\n", active_cpu, node); + + active_cpu++; } } diff --git a/arch/mips/loongson/loongson-3/platform.c b/arch/mips/loongson/loongson-3/platform.c new file mode 100644 index 000000000000..25a97cc0ee33 --- /dev/null +++ b/arch/mips/loongson/loongson-3/platform.c @@ -0,0 +1,43 @@ +/* + * Copyright (C) 2009 Lemote Inc. + * Author: Wu Zhangjin, wuzhangjin@gmail.com + * Xiang Yu, xiangy@lemote.com + * Chen Huacai, chenhc@lemote.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/err.h> +#include <linux/slab.h> +#include <linux/platform_device.h> +#include <asm/bootinfo.h> +#include <boot_param.h> +#include <loongson_hwmon.h> +#include <workarounds.h> + +static int __init loongson3_platform_init(void) +{ + int i; + struct platform_device *pdev; + + if (loongson_sysconf.ecname[0] != '\0') + platform_device_register_simple(loongson_sysconf.ecname, -1, NULL, 0); + + for (i = 0; i < loongson_sysconf.nr_sensors; i++) { + if (loongson_sysconf.sensors[i].type > SENSOR_FAN) + continue; + + pdev = kzalloc(sizeof(struct platform_device), GFP_KERNEL); + pdev->name = loongson_sysconf.sensors[i].name; + pdev->id = loongson_sysconf.sensors[i].id; + pdev->dev.platform_data = &loongson_sysconf.sensors[i]; + platform_device_register(pdev); + } + + return 0; +} + +arch_initcall(loongson3_platform_init); diff --git a/arch/mips/loongson/loongson-3/smp.c b/arch/mips/loongson/loongson-3/smp.c index d8c63af6c7cc..e2eb688b5434 100644 --- a/arch/mips/loongson/loongson-3/smp.c +++ b/arch/mips/loongson/loongson-3/smp.c @@ -25,6 +25,7 @@ #include <asm/tlbflush.h> #include <asm/cacheflush.h> #include <loongson.h> +#include <workarounds.h> #include "smp.h" @@ -239,7 +240,7 @@ static void ipi_mailbox_buf_init(void) */ static void loongson3_send_ipi_single(int cpu, unsigned int action) { - loongson3_ipi_write32((u32)action, ipi_set0_regs[cpu]); + loongson3_ipi_write32((u32)action, ipi_set0_regs[cpu_logical_map(cpu)]); } static void @@ -248,7 +249,7 @@ loongson3_send_ipi_mask(const struct cpumask *mask, unsigned int action) unsigned int i; for_each_cpu(i, mask) - loongson3_ipi_write32((u32)action, ipi_set0_regs[i]); + loongson3_ipi_write32((u32)action, ipi_set0_regs[cpu_logical_map(i)]); } void loongson3_ipi_interrupt(struct pt_regs *regs) @@ -257,10 +258,10 @@ void loongson3_ipi_interrupt(struct pt_regs *regs) unsigned int action, c0count; /* Load the ipi register to figure out what we're supposed to do */ - action = loongson3_ipi_read32(ipi_status0_regs[cpu]); + action = loongson3_ipi_read32(ipi_status0_regs[cpu_logical_map(cpu)]); /* Clear the ipi register to clear the interrupt */ - loongson3_ipi_write32((u32)action, ipi_clear0_regs[cpu]); + loongson3_ipi_write32((u32)action, ipi_clear0_regs[cpu_logical_map(cpu)]); if (action & SMP_RESCHEDULE_YOURSELF) scheduler_ipi(); @@ -291,12 +292,14 @@ static void loongson3_init_secondary(void) /* Set interrupt mask, but don't enable */ change_c0_status(ST0_IM, imask); - for (i = 0; i < loongson_sysconf.nr_cpus; i++) - loongson3_ipi_write32(0xffffffff, ipi_en0_regs[i]); + for (i = 0; i < num_possible_cpus(); i++) + loongson3_ipi_write32(0xffffffff, ipi_en0_regs[cpu_logical_map(i)]); - cpu_data[cpu].package = cpu / loongson_sysconf.cores_per_package; - cpu_data[cpu].core = cpu % loongson_sysconf.cores_per_package; per_cpu(cpu_state, cpu) = CPU_ONLINE; + cpu_data[cpu].core = + cpu_logical_map(cpu) % loongson_sysconf.cores_per_package; + cpu_data[cpu].package = + cpu_logical_map(cpu) / loongson_sysconf.cores_per_package; i = 0; __this_cpu_write(core0_c0count, 0); @@ -314,37 +317,50 @@ static void loongson3_init_secondary(void) static void loongson3_smp_finish(void) { + int cpu = smp_processor_id(); + write_c0_compare(read_c0_count() + mips_hpt_frequency/HZ); local_irq_enable(); loongson3_ipi_write64(0, - (void *)(ipi_mailbox_buf[smp_processor_id()]+0x0)); + (void *)(ipi_mailbox_buf[cpu_logical_map(cpu)]+0x0)); pr_info("CPU#%d finished, CP0_ST=%x\n", smp_processor_id(), read_c0_status()); } static void __init loongson3_smp_setup(void) { - int i, num; + int i = 0, num = 0; /* i: physical id, num: logical id */ init_cpu_possible(cpu_none_mask); - set_cpu_possible(0, true); - - __cpu_number_map[0] = 0; - __cpu_logical_map[0] = 0; /* For unified kernel, NR_CPUS is the maximum possible value, * loongson_sysconf.nr_cpus is the really present value */ - for (i = 1, num = 0; i < loongson_sysconf.nr_cpus; i++) { - set_cpu_possible(i, true); - __cpu_number_map[i] = ++num; - __cpu_logical_map[num] = i; + while (i < loongson_sysconf.nr_cpus) { + if (loongson_sysconf.reserved_cpus_mask & (1<<i)) { + /* Reserved physical CPU cores */ + __cpu_number_map[i] = -1; + } else { + __cpu_number_map[i] = num; + __cpu_logical_map[num] = i; + set_cpu_possible(num, true); + num++; + } + i++; } + pr_info("Detected %i available CPU(s)\n", num); + + while (num < loongson_sysconf.nr_cpus) { + __cpu_logical_map[num] = -1; + num++; + } + ipi_set0_regs_init(); ipi_clear0_regs_init(); ipi_status0_regs_init(); ipi_en0_regs_init(); ipi_mailbox_buf_init(); - pr_info("Detected %i available secondary CPU(s)\n", num); + cpu_data[0].core = cpu_logical_map(0) % loongson_sysconf.cores_per_package; + cpu_data[0].package = cpu_logical_map(0) / loongson_sysconf.cores_per_package; } static void __init loongson3_prepare_cpus(unsigned int max_cpus) @@ -371,10 +387,14 @@ static void loongson3_boot_secondary(int cpu, struct task_struct *idle) pr_debug("CPU#%d, func_pc=%lx, sp=%lx, gp=%lx\n", cpu, startargs[0], startargs[1], startargs[2]); - loongson3_ipi_write64(startargs[3], (void *)(ipi_mailbox_buf[cpu]+0x18)); - loongson3_ipi_write64(startargs[2], (void *)(ipi_mailbox_buf[cpu]+0x10)); - loongson3_ipi_write64(startargs[1], (void *)(ipi_mailbox_buf[cpu]+0x8)); - loongson3_ipi_write64(startargs[0], (void *)(ipi_mailbox_buf[cpu]+0x0)); + loongson3_ipi_write64(startargs[3], + (void *)(ipi_mailbox_buf[cpu_logical_map(cpu)]+0x18)); + loongson3_ipi_write64(startargs[2], + (void *)(ipi_mailbox_buf[cpu_logical_map(cpu)]+0x10)); + loongson3_ipi_write64(startargs[1], + (void *)(ipi_mailbox_buf[cpu_logical_map(cpu)]+0x8)); + loongson3_ipi_write64(startargs[0], + (void *)(ipi_mailbox_buf[cpu_logical_map(cpu)]+0x0)); } #ifdef CONFIG_HOTPLUG_CPU @@ -568,7 +588,7 @@ void loongson3_disable_clock(int cpu) if (loongson_sysconf.cputype == Loongson_3A) { LOONGSON_CHIPCFG(package_id) &= ~(1 << (12 + core_id)); } else if (loongson_sysconf.cputype == Loongson_3B) { - if (!cpuhotplug_workaround) + if (!(loongson_sysconf.workarounds & WORKAROUND_CPUHOTPLUG)) LOONGSON_FREQCTRL(package_id) &= ~(1 << (core_id * 4 + 3)); } } @@ -581,7 +601,7 @@ void loongson3_enable_clock(int cpu) if (loongson_sysconf.cputype == Loongson_3A) { LOONGSON_CHIPCFG(package_id) |= 1 << (12 + core_id); } else if (loongson_sysconf.cputype == Loongson_3B) { - if (!cpuhotplug_workaround) + if (!(loongson_sysconf.workarounds & WORKAROUND_CPUHOTPLUG)) LOONGSON_FREQCTRL(package_id) |= 1 << (core_id * 4 + 3); } } |