diff options
Diffstat (limited to 'arch/blackfin/include/asm')
| -rw-r--r-- | arch/blackfin/include/asm/barrier.h | 3 | ||||
| -rw-r--r-- | arch/blackfin/include/asm/bfin_spi3.h | 258 | ||||
| -rw-r--r-- | arch/blackfin/include/asm/bitops.h | 14 | ||||
| -rw-r--r-- | arch/blackfin/include/asm/dma.h | 2 | ||||
| -rw-r--r-- | arch/blackfin/include/asm/ftrace.h | 11 | ||||
| -rw-r--r-- | arch/blackfin/include/asm/pci.h | 5 | ||||
| -rw-r--r-- | arch/blackfin/include/asm/unistd.h | 1 |
7 files changed, 8 insertions, 286 deletions
diff --git a/arch/blackfin/include/asm/barrier.h b/arch/blackfin/include/asm/barrier.h index 19283a16ac08..420006877998 100644 --- a/arch/blackfin/include/asm/barrier.h +++ b/arch/blackfin/include/asm/barrier.h @@ -27,6 +27,9 @@ #endif /* !CONFIG_SMP */ +#define smp_mb__before_atomic() barrier() +#define smp_mb__after_atomic() barrier() + #include <asm-generic/barrier.h> #endif /* _BLACKFIN_BARRIER_H */ diff --git a/arch/blackfin/include/asm/bfin_spi3.h b/arch/blackfin/include/asm/bfin_spi3.h deleted file mode 100644 index 0957e65a54be..000000000000 --- a/arch/blackfin/include/asm/bfin_spi3.h +++ /dev/null @@ -1,258 +0,0 @@ -/* - * Analog Devices SPI3 controller driver - * - * Copyright (c) 2011 Analog Devices Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef _SPI_CHANNEL_H_ -#define _SPI_CHANNEL_H_ - -#include <linux/types.h> - -/* SPI_CONTROL */ -#define SPI_CTL_EN 0x00000001 /* Enable */ -#define SPI_CTL_MSTR 0x00000002 /* Master/Slave */ -#define SPI_CTL_PSSE 0x00000004 /* controls modf error in master mode */ -#define SPI_CTL_ODM 0x00000008 /* Open Drain Mode */ -#define SPI_CTL_CPHA 0x00000010 /* Clock Phase */ -#define SPI_CTL_CPOL 0x00000020 /* Clock Polarity */ -#define SPI_CTL_ASSEL 0x00000040 /* Slave Select Pin Control */ -#define SPI_CTL_SELST 0x00000080 /* Slave Select Polarity in-between transfers */ -#define SPI_CTL_EMISO 0x00000100 /* Enable MISO */ -#define SPI_CTL_SIZE 0x00000600 /* Word Transfer Size */ -#define SPI_CTL_SIZE08 0x00000000 /* SIZE: 8 bits */ -#define SPI_CTL_SIZE16 0x00000200 /* SIZE: 16 bits */ -#define SPI_CTL_SIZE32 0x00000400 /* SIZE: 32 bits */ -#define SPI_CTL_LSBF 0x00001000 /* LSB First */ -#define SPI_CTL_FCEN 0x00002000 /* Flow-Control Enable */ -#define SPI_CTL_FCCH 0x00004000 /* Flow-Control Channel Selection */ -#define SPI_CTL_FCPL 0x00008000 /* Flow-Control Polarity */ -#define SPI_CTL_FCWM 0x00030000 /* Flow-Control Water-Mark */ -#define SPI_CTL_FIFO0 0x00000000 /* FCWM: TFIFO empty or RFIFO Full */ -#define SPI_CTL_FIFO1 0x00010000 /* FCWM: TFIFO 75% or more empty or RFIFO 75% or more full */ -#define SPI_CTL_FIFO2 0x00020000 /* FCWM: TFIFO 50% or more empty or RFIFO 50% or more full */ -#define SPI_CTL_FMODE 0x00040000 /* Fast-mode Enable */ -#define SPI_CTL_MIOM 0x00300000 /* Multiple I/O Mode */ -#define SPI_CTL_MIO_DIS 0x00000000 /* MIOM: Disable */ -#define SPI_CTL_MIO_DUAL 0x00100000 /* MIOM: Enable DIOM (Dual I/O Mode) */ -#define SPI_CTL_MIO_QUAD 0x00200000 /* MIOM: Enable QUAD (Quad SPI Mode) */ -#define SPI_CTL_SOSI 0x00400000 /* Start on MOSI */ -/* SPI_RX_CONTROL */ -#define SPI_RXCTL_REN 0x00000001 /* Receive Channel Enable */ -#define SPI_RXCTL_RTI 0x00000004 /* Receive Transfer Initiate */ -#define SPI_RXCTL_RWCEN 0x00000008 /* Receive Word Counter Enable */ -#define SPI_RXCTL_RDR 0x00000070 /* Receive Data Request */ -#define SPI_RXCTL_RDR_DIS 0x00000000 /* RDR: Disabled */ -#define SPI_RXCTL_RDR_NE 0x00000010 /* RDR: RFIFO not empty */ -#define SPI_RXCTL_RDR_25 0x00000020 /* RDR: RFIFO 25% full */ -#define SPI_RXCTL_RDR_50 0x00000030 /* RDR: RFIFO 50% full */ -#define SPI_RXCTL_RDR_75 0x00000040 /* RDR: RFIFO 75% full */ -#define SPI_RXCTL_RDR_FULL 0x00000050 /* RDR: RFIFO full */ -#define SPI_RXCTL_RDO 0x00000100 /* Receive Data Over-Run */ -#define SPI_RXCTL_RRWM 0x00003000 /* FIFO Regular Water-Mark */ -#define SPI_RXCTL_RWM_0 0x00000000 /* RRWM: RFIFO Empty */ -#define SPI_RXCTL_RWM_25 0x00001000 /* RRWM: RFIFO 25% full */ -#define SPI_RXCTL_RWM_50 0x00002000 /* RRWM: RFIFO 50% full */ -#define SPI_RXCTL_RWM_75 0x00003000 /* RRWM: RFIFO 75% full */ -#define SPI_RXCTL_RUWM 0x00070000 /* FIFO Urgent Water-Mark */ -#define SPI_RXCTL_UWM_DIS 0x00000000 /* RUWM: Disabled */ -#define SPI_RXCTL_UWM_25 0x00010000 /* RUWM: RFIFO 25% full */ -#define SPI_RXCTL_UWM_50 0x00020000 /* RUWM: RFIFO 50% full */ -#define SPI_RXCTL_UWM_75 0x00030000 /* RUWM: RFIFO 75% full */ -#define SPI_RXCTL_UWM_FULL 0x00040000 /* RUWM: RFIFO full */ -/* SPI_TX_CONTROL */ -#define SPI_TXCTL_TEN 0x00000001 /* Transmit Channel Enable */ -#define SPI_TXCTL_TTI 0x00000004 /* Transmit Transfer Initiate */ -#define SPI_TXCTL_TWCEN 0x00000008 /* Transmit Word Counter Enable */ -#define SPI_TXCTL_TDR 0x00000070 /* Transmit Data Request */ -#define SPI_TXCTL_TDR_DIS 0x00000000 /* TDR: Disabled */ -#define SPI_TXCTL_TDR_NF 0x00000010 /* TDR: TFIFO not full */ -#define SPI_TXCTL_TDR_25 0x00000020 /* TDR: TFIFO 25% empty */ -#define SPI_TXCTL_TDR_50 0x00000030 /* TDR: TFIFO 50% empty */ -#define SPI_TXCTL_TDR_75 0x00000040 /* TDR: TFIFO 75% empty */ -#define SPI_TXCTL_TDR_EMPTY 0x00000050 /* TDR: TFIFO empty */ -#define SPI_TXCTL_TDU 0x00000100 /* Transmit Data Under-Run */ -#define SPI_TXCTL_TRWM 0x00003000 /* FIFO Regular Water-Mark */ -#define SPI_TXCTL_RWM_FULL 0x00000000 /* TRWM: TFIFO full */ -#define SPI_TXCTL_RWM_25 0x00001000 /* TRWM: TFIFO 25% empty */ -#define SPI_TXCTL_RWM_50 0x00002000 /* TRWM: TFIFO 50% empty */ -#define SPI_TXCTL_RWM_75 0x00003000 /* TRWM: TFIFO 75% empty */ -#define SPI_TXCTL_TUWM 0x00070000 /* FIFO Urgent Water-Mark */ -#define SPI_TXCTL_UWM_DIS 0x00000000 /* TUWM: Disabled */ -#define SPI_TXCTL_UWM_25 0x00010000 /* TUWM: TFIFO 25% empty */ -#define SPI_TXCTL_UWM_50 0x00020000 /* TUWM: TFIFO 50% empty */ -#define SPI_TXCTL_UWM_75 0x00030000 /* TUWM: TFIFO 75% empty */ -#define SPI_TXCTL_UWM_EMPTY 0x00040000 /* TUWM: TFIFO empty */ -/* SPI_CLOCK */ -#define SPI_CLK_BAUD 0x0000FFFF /* Baud Rate */ -/* SPI_DELAY */ -#define SPI_DLY_STOP 0x000000FF /* Transfer delay time in multiples of SCK period */ -#define SPI_DLY_LEADX 0x00000100 /* Extended (1 SCK) LEAD Control */ -#define SPI_DLY_LAGX 0x00000200 /* Extended (1 SCK) LAG control */ -/* SPI_SSEL */ -#define SPI_SLVSEL_SSE1 0x00000002 /* SPISSEL1 Enable */ -#define SPI_SLVSEL_SSE2 0x00000004 /* SPISSEL2 Enable */ -#define SPI_SLVSEL_SSE3 0x00000008 /* SPISSEL3 Enable */ -#define SPI_SLVSEL_SSE4 0x00000010 /* SPISSEL4 Enable */ -#define SPI_SLVSEL_SSE5 0x00000020 /* SPISSEL5 Enable */ -#define SPI_SLVSEL_SSE6 0x00000040 /* SPISSEL6 Enable */ -#define SPI_SLVSEL_SSE7 0x00000080 /* SPISSEL7 Enable */ -#define SPI_SLVSEL_SSEL1 0x00000200 /* SPISSEL1 Value */ -#define SPI_SLVSEL_SSEL2 0x00000400 /* SPISSEL2 Value */ -#define SPI_SLVSEL_SSEL3 0x00000800 /* SPISSEL3 Value */ -#define SPI_SLVSEL_SSEL4 0x00001000 /* SPISSEL4 Value */ -#define SPI_SLVSEL_SSEL5 0x00002000 /* SPISSEL5 Value */ -#define SPI_SLVSEL_SSEL6 0x00004000 /* SPISSEL6 Value */ -#define SPI_SLVSEL_SSEL7 0x00008000 /* SPISSEL7 Value */ -/* SPI_RWC */ -#define SPI_RWC_VALUE 0x0000FFFF /* Received Word-Count */ -/* SPI_RWCR */ -#define SPI_RWCR_VALUE 0x0000FFFF /* Received Word-Count Reload */ -/* SPI_TWC */ -#define SPI_TWC_VALUE 0x0000FFFF /* Transmitted Word-Count */ -/* SPI_TWCR */ -#define SPI_TWCR_VALUE 0x0000FFFF /* Transmitted Word-Count Reload */ -/* SPI_IMASK */ -#define SPI_IMSK_RUWM 0x00000002 /* Receive Urgent Water-Mark Interrupt Mask */ -#define SPI_IMSK_TUWM 0x00000004 /* Transmit Urgent Water-Mark Interrupt Mask */ -#define SPI_IMSK_ROM 0x00000010 /* Receive Over-Run Error Interrupt Mask */ -#define SPI_IMSK_TUM 0x00000020 /* Transmit Under-Run Error Interrupt Mask */ -#define SPI_IMSK_TCM 0x00000040 /* Transmit Collision Error Interrupt Mask */ -#define SPI_IMSK_MFM 0x00000080 /* Mode Fault Error Interrupt Mask */ -#define SPI_IMSK_RSM 0x00000100 /* Receive Start Interrupt Mask */ -#define SPI_IMSK_TSM 0x00000200 /* Transmit Start Interrupt Mask */ -#define SPI_IMSK_RFM 0x00000400 /* Receive Finish Interrupt Mask */ -#define SPI_IMSK_TFM 0x00000800 /* Transmit Finish Interrupt Mask */ -/* SPI_IMASKCL */ -#define SPI_IMSK_CLR_RUW 0x00000002 /* Receive Urgent Water-Mark Interrupt Mask */ -#define SPI_IMSK_CLR_TUWM 0x00000004 /* Transmit Urgent Water-Mark Interrupt Mask */ -#define SPI_IMSK_CLR_ROM 0x00000010 /* Receive Over-Run Error Interrupt Mask */ -#define SPI_IMSK_CLR_TUM 0x00000020 /* Transmit Under-Run Error Interrupt Mask */ -#define SPI_IMSK_CLR_TCM 0x00000040 /* Transmit Collision Error Interrupt Mask */ -#define SPI_IMSK_CLR_MFM 0x00000080 /* Mode Fault Error Interrupt Mask */ -#define SPI_IMSK_CLR_RSM 0x00000100 /* Receive Start Interrupt Mask */ -#define SPI_IMSK_CLR_TSM 0x00000200 /* Transmit Start Interrupt Mask */ -#define SPI_IMSK_CLR_RFM 0x00000400 /* Receive Finish Interrupt Mask */ -#define SPI_IMSK_CLR_TFM 0x00000800 /* Transmit Finish Interrupt Mask */ -/* SPI_IMASKST */ -#define SPI_IMSK_SET_RUWM 0x00000002 /* Receive Urgent Water-Mark Interrupt Mask */ -#define SPI_IMSK_SET_TUWM 0x00000004 /* Transmit Urgent Water-Mark Interrupt Mask */ -#define SPI_IMSK_SET_ROM 0x00000010 /* Receive Over-Run Error Interrupt Mask */ -#define SPI_IMSK_SET_TUM 0x00000020 /* Transmit Under-Run Error Interrupt Mask */ -#define SPI_IMSK_SET_TCM 0x00000040 /* Transmit Collision Error Interrupt Mask */ -#define SPI_IMSK_SET_MFM 0x00000080 /* Mode Fault Error Interrupt Mask */ -#define SPI_IMSK_SET_RSM 0x00000100 /* Receive Start Interrupt Mask */ -#define SPI_IMSK_SET_TSM 0x00000200 /* Transmit Start Interrupt Mask */ -#define SPI_IMSK_SET_RFM 0x00000400 /* Receive Finish Interrupt Mask */ -#define SPI_IMSK_SET_TFM 0x00000800 /* Transmit Finish Interrupt Mask */ -/* SPI_STATUS */ -#define SPI_STAT_SPIF 0x00000001 /* SPI Finished */ -#define SPI_STAT_RUWM 0x00000002 /* Receive Urgent Water-Mark Breached */ -#define SPI_STAT_TUWM 0x00000004 /* Transmit Urgent Water-Mark Breached */ -#define SPI_STAT_ROE 0x00000010 /* Receive Over-Run Error Indication */ -#define SPI_STAT_TUE 0x00000020 /* Transmit Under-Run Error Indication */ -#define SPI_STAT_TCE 0x00000040 /* Transmit Collision Error Indication */ -#define SPI_STAT_MODF 0x00000080 /* Mode Fault Error Indication */ -#define SPI_STAT_RS 0x00000100 /* Receive Start Indication */ -#define SPI_STAT_TS 0x00000200 /* Transmit Start Indication */ -#define SPI_STAT_RF 0x00000400 /* Receive Finish Indication */ -#define SPI_STAT_TF 0x00000800 /* Transmit Finish Indication */ -#define SPI_STAT_RFS 0x00007000 /* SPI_RFIFO status */ -#define SPI_STAT_RFIFO_EMPTY 0x00000000 /* RFS: RFIFO Empty */ -#define SPI_STAT_RFIFO_25 0x00001000 /* RFS: RFIFO 25% Full */ -#define SPI_STAT_RFIFO_50 0x00002000 /* RFS: RFIFO 50% Full */ -#define SPI_STAT_RFIFO_75 0x00003000 /* RFS: RFIFO 75% Full */ -#define SPI_STAT_RFIFO_FULL 0x00004000 /* RFS: RFIFO Full */ -#define SPI_STAT_TFS 0x00070000 /* SPI_TFIFO status */ -#define SPI_STAT_TFIFO_FULL 0x00000000 /* TFS: TFIFO full */ -#define SPI_STAT_TFIFO_25 0x00010000 /* TFS: TFIFO 25% empty */ -#define SPI_STAT_TFIFO_50 0x00020000 /* TFS: TFIFO 50% empty */ -#define SPI_STAT_TFIFO_75 0x00030000 /* TFS: TFIFO 75% empty */ -#define SPI_STAT_TFIFO_EMPTY 0x00040000 /* TFS: TFIFO empty */ -#define SPI_STAT_FCS 0x00100000 /* Flow-Control Stall Indication */ -#define SPI_STAT_RFE 0x00400000 /* SPI_RFIFO Empty */ -#define SPI_STAT_TFF 0x00800000 /* SPI_TFIFO Full */ -/* SPI_ILAT */ -#define SPI_ILAT_RUWMI 0x00000002 /* Receive Urgent Water Mark Interrupt */ -#define SPI_ILAT_TUWMI 0x00000004 /* Transmit Urgent Water Mark Interrupt */ -#define SPI_ILAT_ROI 0x00000010 /* Receive Over-Run Error Indication */ -#define SPI_ILAT_TUI 0x00000020 /* Transmit Under-Run Error Indication */ -#define SPI_ILAT_TCI 0x00000040 /* Transmit Collision Error Indication */ -#define SPI_ILAT_MFI 0x00000080 /* Mode Fault Error Indication */ -#define SPI_ILAT_RSI 0x00000100 /* Receive Start Indication */ -#define SPI_ILAT_TSI 0x00000200 /* Transmit Start Indication */ -#define SPI_ILAT_RFI 0x00000400 /* Receive Finish Indication */ -#define SPI_ILAT_TFI 0x00000800 /* Transmit Finish Indication */ -/* SPI_ILATCL */ -#define SPI_ILAT_CLR_RUWMI 0x00000002 /* Receive Urgent Water Mark Interrupt */ -#define SPI_ILAT_CLR_TUWMI 0x00000004 /* Transmit Urgent Water Mark Interrupt */ -#define SPI_ILAT_CLR_ROI 0x00000010 /* Receive Over-Run Error Indication */ -#define SPI_ILAT_CLR_TUI 0x00000020 /* Transmit Under-Run Error Indication */ -#define SPI_ILAT_CLR_TCI 0x00000040 /* Transmit Collision Error Indication */ -#define SPI_ILAT_CLR_MFI 0x00000080 /* Mode Fault Error Indication */ -#define SPI_ILAT_CLR_RSI 0x00000100 /* Receive Start Indication */ -#define SPI_ILAT_CLR_TSI 0x00000200 /* Transmit Start Indication */ -#define SPI_ILAT_CLR_RFI 0x00000400 /* Receive Finish Indication */ -#define SPI_ILAT_CLR_TFI 0x00000800 /* Transmit Finish Indication */ - -/* - * bfin spi3 registers layout - */ -struct bfin_spi_regs { - u32 revid; - u32 control; - u32 rx_control; - u32 tx_control; - u32 clock; - u32 delay; - u32 ssel; - u32 rwc; - u32 rwcr; - u32 twc; - u32 twcr; - u32 reserved0; - u32 emask; - u32 emaskcl; - u32 emaskst; - u32 reserved1; - u32 status; - u32 elat; - u32 elatcl; - u32 reserved2; - u32 rfifo; - u32 reserved3; - u32 tfifo; -}; - -#define MAX_CTRL_CS 8 /* cs in spi controller */ - -/* device.platform_data for SSP controller devices */ -struct bfin_spi3_master { - u16 num_chipselect; - u16 pin_req[7]; -}; - -/* spi_board_info.controller_data for SPI slave devices, - * copied to spi_device.platform_data ... mostly for dma tuning - */ -struct bfin_spi3_chip { - u32 control; - u16 cs_chg_udelay; /* Some devices require 16-bit delays */ - u32 tx_dummy_val; /* tx value for rx only transfer */ - bool enable_dma; -}; - -#endif /* _SPI_CHANNEL_H_ */ diff --git a/arch/blackfin/include/asm/bitops.h b/arch/blackfin/include/asm/bitops.h index 0ca40dd44724..b298b654a26f 100644 --- a/arch/blackfin/include/asm/bitops.h +++ b/arch/blackfin/include/asm/bitops.h @@ -27,21 +27,17 @@ #include <asm-generic/bitops/ext2-atomic.h> +#include <asm/barrier.h> + #ifndef CONFIG_SMP #include <linux/irqflags.h> - /* * clear_bit may not imply a memory barrier */ -#ifndef smp_mb__before_clear_bit -#define smp_mb__before_clear_bit() smp_mb() -#define smp_mb__after_clear_bit() smp_mb() -#endif #include <asm-generic/bitops/atomic.h> #include <asm-generic/bitops/non-atomic.h> #else -#include <asm/barrier.h> #include <asm/byteorder.h> /* swab32 */ #include <linux/linkage.h> @@ -101,12 +97,6 @@ static inline int test_and_change_bit(int nr, volatile unsigned long *addr) return __raw_bit_test_toggle_asm(a, nr & 0x1f); } -/* - * clear_bit() doesn't provide any barrier for the compiler. - */ -#define smp_mb__before_clear_bit() barrier() -#define smp_mb__after_clear_bit() barrier() - #define test_bit __skip_test_bit #include <asm-generic/bitops/non-atomic.h> #undef test_bit diff --git a/arch/blackfin/include/asm/dma.h b/arch/blackfin/include/asm/dma.h index 8d1e4c2d2c36..40e9c2bbc6e3 100644 --- a/arch/blackfin/include/asm/dma.h +++ b/arch/blackfin/include/asm/dma.h @@ -316,6 +316,8 @@ static inline void disable_dma(unsigned int channel) } static inline void enable_dma(unsigned int channel) { + dma_ch[channel].regs->curr_x_count = 0; + dma_ch[channel].regs->curr_y_count = 0; dma_ch[channel].regs->cfg |= DMAEN; } int set_dma_callback(unsigned int channel, irq_handler_t callback, void *data); diff --git a/arch/blackfin/include/asm/ftrace.h b/arch/blackfin/include/asm/ftrace.h index 8a029505d7b7..2f1c3c2657ad 100644 --- a/arch/blackfin/include/asm/ftrace.h +++ b/arch/blackfin/include/asm/ftrace.h @@ -66,16 +66,7 @@ extern inline void *return_address(unsigned int level) #endif /* CONFIG_FRAME_POINTER */ -#define HAVE_ARCH_CALLER_ADDR - -/* inline function or macro may lead to unexpected result */ -#define CALLER_ADDR0 ((unsigned long)__builtin_return_address(0)) -#define CALLER_ADDR1 ((unsigned long)return_address(1)) -#define CALLER_ADDR2 ((unsigned long)return_address(2)) -#define CALLER_ADDR3 ((unsigned long)return_address(3)) -#define CALLER_ADDR4 ((unsigned long)return_address(4)) -#define CALLER_ADDR5 ((unsigned long)return_address(5)) -#define CALLER_ADDR6 ((unsigned long)return_address(6)) +#define ftrace_return_address(n) return_address(n) #endif /* __ASSEMBLY__ */ diff --git a/arch/blackfin/include/asm/pci.h b/arch/blackfin/include/asm/pci.h index 74352c4597d9..c737909fba47 100644 --- a/arch/blackfin/include/asm/pci.h +++ b/arch/blackfin/include/asm/pci.h @@ -10,9 +10,4 @@ #define PCIBIOS_MIN_IO 0x00001000 #define PCIBIOS_MIN_MEM 0x10000000 -static inline void pcibios_penalize_isa_irq(int irq) -{ - /* We don't do dynamic PCI IRQ allocation */ -} - #endif /* _ASM_BFIN_PCI_H */ diff --git a/arch/blackfin/include/asm/unistd.h b/arch/blackfin/include/asm/unistd.h index c35414bdf7bd..c8c8ff9eff61 100644 --- a/arch/blackfin/include/asm/unistd.h +++ b/arch/blackfin/include/asm/unistd.h @@ -12,7 +12,6 @@ #define __ARCH_WANT_SYS_ALARM #define __ARCH_WANT_SYS_GETHOSTNAME #define __ARCH_WANT_SYS_PAUSE -#define __ARCH_WANT_SYS_SGETMASK #define __ARCH_WANT_SYS_TIME #define __ARCH_WANT_SYS_FADVISE64 #define __ARCH_WANT_SYS_GETPGRP |