diff options
Diffstat (limited to 'arch/arm/mm')
| -rw-r--r-- | arch/arm/mm/Kconfig | 9 | ||||
| -rw-r--r-- | arch/arm/mm/cache-l2x0.c | 33 | ||||
| -rw-r--r-- | arch/arm/mm/nommu.c | 1 | ||||
| -rw-r--r-- | arch/arm/mm/proc-arm925.S | 1 |
4 files changed, 38 insertions, 6 deletions
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index eda0dd0ab97b..c348eaee7ee2 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -889,9 +889,10 @@ config CACHE_L2X0 help This option enables the L2x0 PrimeCell. +if CACHE_L2X0 + config CACHE_PL310 bool - depends on CACHE_L2X0 default y if CPU_V7 && !(CPU_V6 || CPU_V6K) help This option enables optimisations for the PL310 cache @@ -899,7 +900,6 @@ config CACHE_PL310 config PL310_ERRATA_588369 bool "PL310 errata: Clean & Invalidate maintenance operations do not invalidate clean lines" - depends on CACHE_L2X0 help The PL310 L2 cache controller implements three types of Clean & Invalidate maintenance operations: by Physical Address @@ -912,7 +912,6 @@ config PL310_ERRATA_588369 config PL310_ERRATA_727915 bool "PL310 errata: Background Clean & Invalidate by Way operation can cause data corruption" - depends on CACHE_L2X0 help PL310 implements the Clean & Invalidate by Way L2 cache maintenance operation (offset 0x7FC). This operation runs in background so that @@ -923,7 +922,6 @@ config PL310_ERRATA_727915 config PL310_ERRATA_753970 bool "PL310 errata: cache sync operation may be faulty" - depends on CACHE_PL310 help This option enables the workaround for the 753970 PL310 (r3p0) erratum. @@ -938,7 +936,6 @@ config PL310_ERRATA_753970 config PL310_ERRATA_769419 bool "PL310 errata: no automatic Store Buffer drain" - depends on CACHE_L2X0 help On revisions of the PL310 prior to r3p2, the Store Buffer does not automatically drain. This can cause normal, non-cacheable @@ -948,6 +945,8 @@ config PL310_ERRATA_769419 on systems with an outer cache, the store buffer is drained explicitly. +endif + config CACHE_TAUROS2 bool "Enable the Tauros2 L2 cache controller" depends on (ARCH_DOVE || ARCH_MMP || CPU_PJ4) diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c index efc5cabf70e0..7c3fb41a462e 100644 --- a/arch/arm/mm/cache-l2x0.c +++ b/arch/arm/mm/cache-l2x0.c @@ -664,7 +664,7 @@ static int l2c310_cpu_enable_flz(struct notifier_block *nb, unsigned long act, v static void __init l2c310_enable(void __iomem *base, u32 aux, unsigned num_lock) { - unsigned rev = readl_relaxed(base + L2X0_CACHE_ID) & L2X0_CACHE_ID_PART_MASK; + unsigned rev = readl_relaxed(base + L2X0_CACHE_ID) & L2X0_CACHE_ID_RTL_MASK; bool cortex_a9 = read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A9; if (rev >= L310_CACHE_ID_RTL_R2P0) { @@ -1069,6 +1069,33 @@ static const struct l2c_init_data of_l2c310_data __initconst = { }; /* + * This is a variant of the of_l2c310_data with .sync set to + * NULL. Outer sync operations are not needed when the system is I/O + * coherent, and potentially harmful in certain situations (PCIe/PL310 + * deadlock on Armada 375/38x due to hardware I/O coherency). The + * other operations are kept because they are infrequent (therefore do + * not cause the deadlock in practice) and needed for secondary CPU + * boot and other power management activities. + */ +static const struct l2c_init_data of_l2c310_coherent_data __initconst = { + .type = "L2C-310 Coherent", + .way_size_0 = SZ_8K, + .num_lock = 8, + .of_parse = l2c310_of_parse, + .enable = l2c310_enable, + .fixup = l2c310_fixup, + .save = l2c310_save, + .outer_cache = { + .inv_range = l2c210_inv_range, + .clean_range = l2c210_clean_range, + .flush_range = l2c210_flush_range, + .flush_all = l2c210_flush_all, + .disable = l2c310_disable, + .resume = l2c310_resume, + }, +}; + +/* * Note that the end addresses passed to Linux primitives are * noninclusive, while the hardware cache range operations use * inclusive start and end addresses. @@ -1487,6 +1514,10 @@ int __init l2x0_of_init(u32 aux_val, u32 aux_mask) data = of_match_node(l2x0_ids, np)->data; + if (of_device_is_compatible(np, "arm,pl310-cache") && + of_property_read_bool(np, "arm,io-coherent")) + data = &of_l2c310_coherent_data; + old_aux = readl_relaxed(l2x0_base + L2X0_AUX_CTRL); if (old_aux != ((old_aux & aux_mask) | aux_val)) { pr_warn("L2C: platform modifies aux control register: 0x%08x -> 0x%08x\n", diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c index da1874f9f8cf..a014dfacd5ca 100644 --- a/arch/arm/mm/nommu.c +++ b/arch/arm/mm/nommu.c @@ -300,6 +300,7 @@ void __init sanity_check_meminfo(void) sanity_check_meminfo_mpu(); end = memblock_end_of_DRAM(); high_memory = __va(end - 1) + 1; + memblock_set_current_limit(end); } /* diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S index 97448c3acf38..ba0d58e1a2a2 100644 --- a/arch/arm/mm/proc-arm925.S +++ b/arch/arm/mm/proc-arm925.S @@ -502,6 +502,7 @@ __\name\()_proc_info: .long \cpu_val .long \cpu_mask .long PMD_TYPE_SECT | \ + PMD_SECT_CACHEABLE | \ PMD_BIT4 | \ PMD_SECT_AP_WRITE | \ PMD_SECT_AP_READ |