summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/boot')
-rw-r--r--arch/arm/boot/dts/am57xx-beagle-x15.dts42
-rw-r--r--arch/arm/boot/dts/dra7.dtsi1
-rw-r--r--arch/arm/boot/dts/omap2430.dtsi1
-rw-r--r--arch/arm/boot/dts/omap3.dtsi25
-rw-r--r--arch/arm/boot/dts/omap4.dtsi1
-rw-r--r--arch/arm/boot/dts/omap5-uevm.dts4
-rw-r--r--arch/arm/boot/dts/omap5.dtsi1
7 files changed, 46 insertions, 29 deletions
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts
index a4274abf1437..568adf5efde0 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15.dts
+++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts
@@ -98,13 +98,6 @@
pinctrl-0 = <&extcon_usb1_pins>;
};
- extcon_usb2: extcon_usb2 {
- compatible = "linux,extcon-usb-gpio";
- id-gpio = <&gpio7 24 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&extcon_usb2_pins>;
- };
-
hdmi0: connector {
compatible = "hdmi-connector";
label = "hdmi";
@@ -326,12 +319,6 @@
>;
};
- extcon_usb2_pins: extcon_usb2_pins {
- pinctrl-single,pins = <
- 0x3e8 (PIN_INPUT_PULLUP | MUX_MODE14) /* uart1_ctsn.gpio7_24 */
- >;
- };
-
tpd12s015_pins: pinmux_tpd12s015_pins {
pinctrl-single,pins = <
0x3b0 (PIN_OUTPUT | MUX_MODE14) /* gpio7_10 CT_CP_HPD */
@@ -432,7 +419,7 @@
};
ldo3_reg: ldo3 {
- /* VDDA_1V8_PHY */
+ /* VDDA_1V8_PHYA */
regulator-name = "ldo3";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
@@ -440,6 +427,15 @@
regulator-boot-on;
};
+ ldo4_reg: ldo4 {
+ /* VDDA_1V8_PHYB */
+ regulator-name = "ldo4";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
ldo9_reg: ldo9 {
/* VDD_RTC */
regulator-name = "ldo9";
@@ -495,6 +491,14 @@
gpio-controller;
#gpio-cells = <2>;
};
+
+ extcon_usb2: tps659038_usb {
+ compatible = "ti,palmas-usb-vid";
+ ti,enable-vbus-detection;
+ ti,enable-id-detection;
+ id-gpios = <&gpio7 24 GPIO_ACTIVE_HIGH>;
+ };
+
};
tmp102: tmp102@48 {
@@ -623,6 +627,14 @@
};
&usb2 {
+ /*
+ * Stand alone usage is peripheral only.
+ * However, with some resistor modifications
+ * this port can be used via expansion connectors
+ * as "host" or "dual-role". If so, provide
+ * the necessary dr_mode override in the expansion
+ * board's DT.
+ */
dr_mode = "peripheral";
};
@@ -681,7 +693,7 @@
&hdmi {
status = "ok";
- vdda-supply = <&ldo3_reg>;
+ vdda-supply = <&ldo4_reg>;
pinctrl-names = "default";
pinctrl-0 = <&hdmi_pins>;
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index fed95a4547ee..e289c706d27d 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -120,6 +120,7 @@
reg = <0x0 0x1400>;
#address-cells = <1>;
#size-cells = <1>;
+ ranges = <0 0x0 0x1400>;
pbias_regulator: pbias_regulator {
compatible = "ti,pbias-dra7", "ti,pbias-omap";
diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi
index 3961a6f170e1..798dda072b2a 100644
--- a/arch/arm/boot/dts/omap2430.dtsi
+++ b/arch/arm/boot/dts/omap2430.dtsi
@@ -56,6 +56,7 @@
reg = <0x270 0x240>;
#address-cells = <1>;
#size-cells = <1>;
+ ranges = <0 0x270 0x240>;
scm_clocks: clocks {
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 9af9ae190299..8a2b25332b8c 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -113,10 +113,22 @@
};
scm_conf: scm_conf@270 {
- compatible = "syscon";
+ compatible = "syscon", "simple-bus";
reg = <0x270 0x330>;
#address-cells = <1>;
#size-cells = <1>;
+ ranges = <0 0x270 0x330>;
+
+ pbias_regulator: pbias_regulator {
+ compatible = "ti,pbias-omap3", "ti,pbias-omap";
+ reg = <0x2b0 0x4>;
+ syscon = <&scm_conf>;
+ pbias_mmc_reg: pbias_mmc_omap2430 {
+ regulator-name = "pbias_mmc_omap2430";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ };
+ };
scm_clocks: clocks {
#address-cells = <1>;
@@ -202,17 +214,6 @@
dma-requests = <96>;
};
- pbias_regulator: pbias_regulator {
- compatible = "ti,pbias-omap3", "ti,pbias-omap";
- reg = <0x2b0 0x4>;
- syscon = <&scm_conf>;
- pbias_mmc_reg: pbias_mmc_omap2430 {
- regulator-name = "pbias_mmc_omap2430";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3000000>;
- };
- };
-
gpio1: gpio@48310000 {
compatible = "ti,omap3-gpio";
reg = <0x48310000 0x200>;
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 5aad7f37df8b..5a206c100ce2 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -196,6 +196,7 @@
reg = <0x5a0 0x170>;
#address-cells = <1>;
#size-cells = <1>;
+ ranges = <0 0x5a0 0x170>;
pbias_regulator: pbias_regulator {
compatible = "ti,pbias-omap4", "ti,pbias-omap";
diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts
index 3cc8f357d5b8..3cb030f9d2c4 100644
--- a/arch/arm/boot/dts/omap5-uevm.dts
+++ b/arch/arm/boot/dts/omap5-uevm.dts
@@ -174,8 +174,8 @@
i2c5_pins: pinmux_i2c5_pins {
pinctrl-single,pins = <
- 0x184 (PIN_INPUT | MUX_MODE0) /* i2c5_scl */
- 0x186 (PIN_INPUT | MUX_MODE0) /* i2c5_sda */
+ 0x186 (PIN_INPUT | MUX_MODE0) /* i2c5_scl */
+ 0x188 (PIN_INPUT | MUX_MODE0) /* i2c5_sda */
>;
};
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index 8d5f9d26110e..4c04389dab32 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -185,6 +185,7 @@
reg = <0x5a0 0xec>;
#address-cells = <1>;
#size-cells = <1>;
+ ranges = <0 0x5a0 0xec>;
pbias_regulator: pbias_regulator {
compatible = "ti,pbias-omap5", "ti,pbias-omap";
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-05-01 20:21:40 +0000