diff options
Diffstat (limited to 'arch/arm/boot/dts')
26 files changed, 51 insertions, 29 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 233159d2eaab..bb8fa023d574 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -578,7 +578,7 @@ dtb-$(CONFIG_MACH_SUN4I) += \ sun4i-a10-hackberry.dtb \ sun4i-a10-hyundai-a7hd.dtb \ sun4i-a10-inet97fv2.dtb \ - sun4i-a10-itead-iteaduino-plus.dts \ + sun4i-a10-itead-iteaduino-plus.dtb \ sun4i-a10-jesurun-q5.dtb \ sun4i-a10-marsboard.dtb \ sun4i-a10-mini-xplus.dtb \ diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts index 568adf5efde0..d55e3ea89fda 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts @@ -402,11 +402,12 @@ /* SMPS9 unused */ ldo1_reg: ldo1 { - /* VDD_SD */ + /* VDD_SD / VDDSHV8 */ regulator-name = "ldo1"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-boot-on; + regulator-always-on; }; ldo2_reg: ldo2 { diff --git a/arch/arm/boot/dts/armada-385-db-ap.dts b/arch/arm/boot/dts/armada-385-db-ap.dts index 89f5a95954ed..4047621b137e 100644 --- a/arch/arm/boot/dts/armada-385-db-ap.dts +++ b/arch/arm/boot/dts/armada-385-db-ap.dts @@ -46,7 +46,7 @@ / { model = "Marvell Armada 385 Access Point Development Board"; - compatible = "marvell,a385-db-ap", "marvell,armada385", "marvell,armada38x"; + compatible = "marvell,a385-db-ap", "marvell,armada385", "marvell,armada380"; chosen { stdout-path = "serial1:115200n8"; diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi index 63a48490e2f9..d4dbd28d348c 100644 --- a/arch/arm/boot/dts/berlin2q.dtsi +++ b/arch/arm/boot/dts/berlin2q.dtsi @@ -152,7 +152,7 @@ }; usb_phy2: phy@a2f400 { - compatible = "marvell,berlin2-usb-phy"; + compatible = "marvell,berlin2cd-usb-phy"; reg = <0xa2f400 0x128>; #phy-cells = <0>; resets = <&chip_rst 0x104 14>; @@ -170,7 +170,7 @@ }; usb_phy0: phy@b74000 { - compatible = "marvell,berlin2-usb-phy"; + compatible = "marvell,berlin2cd-usb-phy"; reg = <0xb74000 0x128>; #phy-cells = <0>; resets = <&chip_rst 0x104 12>; @@ -178,7 +178,7 @@ }; usb_phy1: phy@b78000 { - compatible = "marvell,berlin2-usb-phy"; + compatible = "marvell,berlin2cd-usb-phy"; reg = <0xb78000 0x128>; #phy-cells = <0>; resets = <&chip_rst 0x104 13>; diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi index ca0e3c15977f..294cfe40388d 100644 --- a/arch/arm/boot/dts/exynos4412.dtsi +++ b/arch/arm/boot/dts/exynos4412.dtsi @@ -98,6 +98,7 @@ opp-hz = /bits/ 64 <800000000>; opp-microvolt = <1000000>; clock-latency-ns = <200000>; + opp-suspend; }; opp07 { opp-hz = /bits/ 64 <900000000>; diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index 15aea760c1da..c625e71217aa 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -197,6 +197,7 @@ regulator-name = "P1.8V_LDO_OUT10"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-always-on; }; ldo11_reg: LDO11 { diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts index 8f4d76c5e11c..1b95da79293c 100644 --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts @@ -915,6 +915,11 @@ }; }; +&pmu_system_controller { + assigned-clocks = <&pmu_system_controller 0>; + assigned-clock-parents = <&clock CLK_FIN_PLL>; +}; + &rtc { status = "okay"; clocks = <&clock CLK_RTC>, <&max77802 MAX77802_CLK_32K_AP>; diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index df9aee92ecf4..1b3d6c769a3c 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -1117,7 +1117,7 @@ interrupt-parent = <&combiner>; interrupts = <3 0>; clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_FIMD1M0>, <&clock CLK_FIMD1>; + clocks = <&clock CLK_SMMU_FIMD1M1>, <&clock CLK_FIMD1>; power-domains = <&disp_pd>; #iommu-cells = <0>; }; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi index 79ffdfe712aa..3b43e57845ae 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi @@ -472,7 +472,6 @@ */ pinctrl-0 = <&pwm0_out &pwm1_out &pwm2_out &pwm3_out>; pinctrl-names = "default"; - samsung,pwm-outputs = <0>; status = "okay"; }; diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts index 7d5b386b5ae6..8f40c7e549bd 100644 --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts @@ -878,6 +878,11 @@ }; }; +&pmu_system_controller { + assigned-clocks = <&pmu_system_controller 0>; + assigned-clock-parents = <&clock CLK_FIN_PLL>; +}; + &rtc { status = "okay"; clocks = <&clock CLK_RTC>, <&max77802 MAX77802_CLK_32K_AP>; diff --git a/arch/arm/boot/dts/imx53-qsrb.dts b/arch/arm/boot/dts/imx53-qsrb.dts index 66e47de5e826..96d7eede412e 100644 --- a/arch/arm/boot/dts/imx53-qsrb.dts +++ b/arch/arm/boot/dts/imx53-qsrb.dts @@ -36,7 +36,7 @@ pinctrl-0 = <&pinctrl_pmic>; reg = <0x08>; interrupt-parent = <&gpio5>; - interrupts = <23 0x8>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH>; regulators { sw1_reg: sw1a { regulator-name = "SW1"; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index c3e3ca9362fb..cd170376eaca 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -15,6 +15,7 @@ #include <dt-bindings/clock/imx5-clock.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> / { aliases { diff --git a/arch/arm/boot/dts/imx6qdl-rex.dtsi b/arch/arm/boot/dts/imx6qdl-rex.dtsi index 3373fd958e95..a50356243888 100644 --- a/arch/arm/boot/dts/imx6qdl-rex.dtsi +++ b/arch/arm/boot/dts/imx6qdl-rex.dtsi @@ -35,7 +35,6 @@ compatible = "regulator-fixed"; reg = <1>; pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbh1>; regulator-name = "usbh1_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; @@ -47,7 +46,6 @@ compatible = "regulator-fixed"; reg = <2>; pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg>; regulator-name = "usb_otg_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi index b738ce0f9d9b..6e444bb873f9 100644 --- a/arch/arm/boot/dts/imx7d.dtsi +++ b/arch/arm/boot/dts/imx7d.dtsi @@ -588,10 +588,10 @@ status = "disabled"; }; - uart2: serial@30870000 { + uart2: serial@30890000 { compatible = "fsl,imx7d-uart", "fsl,imx6q-uart"; - reg = <0x30870000 0x10000>; + reg = <0x30890000 0x10000>; interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX7D_UART2_ROOT_CLK>, <&clks IMX7D_UART2_ROOT_CLK>; diff --git a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts index 91146c318798..5b0430041ec6 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts +++ b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts @@ -12,7 +12,7 @@ / { model = "LogicPD Zoom DM3730 Torpedo Development Kit"; - compatible = "logicpd,dm3730-torpedo-devkit", "ti,omap36xx"; + compatible = "logicpd,dm3730-torpedo-devkit", "ti,omap3630", "ti,omap3"; gpio_keys { compatible = "gpio-keys"; diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi index 548441384d2a..8c77c87660cd 100644 --- a/arch/arm/boot/dts/meson.dtsi +++ b/arch/arm/boot/dts/meson.dtsi @@ -67,7 +67,7 @@ timer@c1109940 { compatible = "amlogic,meson6-timer"; - reg = <0xc1109940 0x14>; + reg = <0xc1109940 0x18>; interrupts = <0 10 1>; }; @@ -80,36 +80,37 @@ wdt: watchdog@c1109900 { compatible = "amlogic,meson6-wdt"; reg = <0xc1109900 0x8>; + interrupts = <0 0 1>; }; uart_AO: serial@c81004c0 { compatible = "amlogic,meson-uart"; - reg = <0xc81004c0 0x14>; + reg = <0xc81004c0 0x18>; interrupts = <0 90 1>; clocks = <&clk81>; status = "disabled"; }; - uart_A: serial@c81084c0 { + uart_A: serial@c11084c0 { compatible = "amlogic,meson-uart"; - reg = <0xc81084c0 0x14>; - interrupts = <0 90 1>; + reg = <0xc11084c0 0x18>; + interrupts = <0 26 1>; clocks = <&clk81>; status = "disabled"; }; - uart_B: serial@c81084dc { + uart_B: serial@c11084dc { compatible = "amlogic,meson-uart"; - reg = <0xc81084dc 0x14>; - interrupts = <0 90 1>; + reg = <0xc11084dc 0x18>; + interrupts = <0 75 1>; clocks = <&clk81>; status = "disabled"; }; - uart_C: serial@c8108700 { + uart_C: serial@c1108700 { compatible = "amlogic,meson-uart"; - reg = <0xc8108700 0x14>; - interrupts = <0 90 1>; + reg = <0xc1108700 0x18>; + interrupts = <0 93 1>; clocks = <&clk81>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/omap3-evm-37xx.dts b/arch/arm/boot/dts/omap3-evm-37xx.dts index 16e8ce350dda..bb339d1648e0 100644 --- a/arch/arm/boot/dts/omap3-evm-37xx.dts +++ b/arch/arm/boot/dts/omap3-evm-37xx.dts @@ -13,7 +13,7 @@ / { model = "TI OMAP37XX EVM (TMDSEVM3730)"; - compatible = "ti,omap3-evm-37xx", "ti,omap36xx"; + compatible = "ti,omap3-evm-37xx", "ti,omap3630", "ti,omap3"; memory { device_type = "memory"; diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index a0b2a79cbfbd..4624d0f2a754 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -1627,6 +1627,7 @@ "mix.0", "mix.1", "dvc.0", "dvc.1", "clk_a", "clk_b", "clk_c", "clk_i"; + power-domains = <&cpg_clocks>; status = "disabled"; diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index 831525dd39a6..1666c8a6b143 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -1677,6 +1677,7 @@ "mix.0", "mix.1", "dvc.0", "dvc.1", "clk_a", "clk_b", "clk_c", "clk_i"; + power-domains = <&cpg_clocks>; status = "disabled"; diff --git a/arch/arm/boot/dts/ste-hrefv60plus.dtsi b/arch/arm/boot/dts/ste-hrefv60plus.dtsi index 810cda743b6d..9c2387b34d0c 100644 --- a/arch/arm/boot/dts/ste-hrefv60plus.dtsi +++ b/arch/arm/boot/dts/ste-hrefv60plus.dtsi @@ -56,7 +56,7 @@ /* VMMCI level-shifter enable */ default_hrefv60_cfg2 { pins = "GPIO169_D22"; - ste,config = <&gpio_out_lo>; + ste,config = <&gpio_out_hi>; }; /* VMMCI level-shifter voltage select */ default_hrefv60_cfg3 { diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index 2bebaa286f9a..391230c3dc93 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -107,7 +107,7 @@ 720000 1200000 528000 1100000 312000 1000000 - 144000 900000 + 144000 1000000 >; #cooling-cells = <2>; cooling-min-level = <0>; diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi index 9d4f86e9c50a..d845bd1448b5 100644 --- a/arch/arm/boot/dts/tegra114.dtsi +++ b/arch/arm/boot/dts/tegra114.dtsi @@ -234,7 +234,9 @@ gpio-controller; #interrupt-cells = <2>; interrupt-controller; + /* gpio-ranges = <&pinmux 0 0 246>; + */ }; apbmisc@70000800 { diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi index 1e204a6de12c..819e2ae2cabe 100644 --- a/arch/arm/boot/dts/tegra124.dtsi +++ b/arch/arm/boot/dts/tegra124.dtsi @@ -258,7 +258,9 @@ gpio-controller; #interrupt-cells = <2>; interrupt-controller; + /* gpio-ranges = <&pinmux 0 0 251>; + */ }; apbdma: dma@0,60020000 { diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index e058709e6d98..969b828505ae 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -244,7 +244,9 @@ gpio-controller; #interrupt-cells = <2>; interrupt-controller; + /* gpio-ranges = <&pinmux 0 0 224>; + */ }; apbmisc@70000800 { diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index fe04fb5e155f..c6938ad1b543 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -349,7 +349,9 @@ gpio-controller; #interrupt-cells = <2>; interrupt-controller; + /* gpio-ranges = <&pinmux 0 0 248>; + */ }; apbmisc@70000800 { diff --git a/arch/arm/boot/dts/uniphier-ph1-ld6b-ref.dts b/arch/arm/boot/dts/uniphier-ph1-ld6b-ref.dts index 33963acd7e8f..f80f772d99fb 100644 --- a/arch/arm/boot/dts/uniphier-ph1-ld6b-ref.dts +++ b/arch/arm/boot/dts/uniphier-ph1-ld6b-ref.dts @@ -85,7 +85,7 @@ }; ðsc { - interrupts = <0 50 4>; + interrupts = <0 52 4>; }; &serial0 { |