1 files changed, 125 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/overlays/balena-fin-overlay.dts b/arch/arm/boot/dts/overlays/balena-fin-overlay.dts
new file mode 100644
index 000000000000..e7ead7cdf5f5
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/balena-fin-overlay.dts
@@ -0,0 +1,125 @@
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+/{
+	compatible = "brcm,bcm2835";
+
+	fragment@0 {
+		target = <&mmcnr>;
+		__overlay__ {
+			pinctrl-names = "default";
+			pinctrl-0 = <&sdio_pins>;
+			bus-width = <4>;
+			brcm,overclock-50 = <35>;
+			status = "okay";
+		};
+	};
+
+	fragment@1 {
+		target = <&gpio>;
+		__overlay__ {
+			sdio_pins: sdio_pins {
+				brcm,pins = <34 35 36 37 38 39>;
+				brcm,function = <7>; /* ALT3 = SD1 */
+				brcm,pull = <0 2 2 2 2 2>;
+			};
+
+			power_ctrl_pins: power_ctrl_pins {
+				brcm,pins = <40>;
+				brcm,function = <1>; // out
+			};
+		};
+	};
+
+	fragment@2 {
+		target-path = "/";
+		__overlay__ {
+			// We should switch to mmc-pwrseq-sd8787 after making it
+			// compatible with sd8887
+			// Currently that module requires two GPIOs to function since it
+			// targets a slightly different chip
+			power_ctrl: power_ctrl {
+				compatible = "gpio-poweroff";
+				gpios = <&gpio 40 1>;
+				force;
+				pinctrl-names = "default";
+				pinctrl-0 = <&power_ctrl_pins>;
+			};
+
+			i2c_soft: i2c@0 {
+				compatible = "i2c-gpio";
+				gpios = <&gpio 43 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN) /* sda */
+				         &gpio 42 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN) /* scl */>;
+				i2c-gpio,delay-us = <5>;
+				i2c-gpio,scl-open-drain;
+				i2c-gpio,sda-open-drain;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			sd8xxx-wlan {
+				drvdbg = <0x6>;
+				drv_mode = <0x1>;
+				cfg80211_wext = <0xf>;
+				sta_name = "wlan";
+				wfd_name = "p2p";
+				cal_data_cfg = "none";
+			};
+		};
+	};
+
+	fragment@3 {
+		target = <&i2c_soft>;
+		__overlay__ {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "okay";
+
+			gpio_expander: gpio_expander@20 {
+				compatible = "nxp,pca9554";
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x20>;
+				status = "okay";
+			};
+
+			// rtc clock
+			ds1307: ds1307@68 {
+				compatible = "dallas,ds1307";
+				reg = <0x68>;
+				status = "okay";
+			};
+
+			// RGB LEDs (>= v1.1.0)
+			pca9633: pca9633@62 {
+				compatible = "nxp,pca9633";
+				reg = <0x62>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				red@0 {
+					label = "red";
+					reg = <0>;
+					linux,default-trigger = "none";
+				};
+				green@1 {
+					label = "green";
+					reg = <1>;
+					linux,default-trigger = "none";
+				};
+				blue@2 {
+					label = "blue";
+					reg = <2>;
+					linux,default-trigger = "none";
+				};
+				unused@3 {
+					label = "unused";
+					reg = <3>;
+					linux,default-trigger = "none";
+				};
+			};
+		};
+	};
+};