diff options
Diffstat (limited to 'Documentation/power')
| -rw-r--r-- | Documentation/power/pm_qos_interface.txt | 4 | ||||
| -rw-r--r-- | Documentation/power/runtime_pm.txt | 10 | ||||
| -rw-r--r-- | Documentation/power/suspend-and-interrupts.txt | 2 | ||||
| -rw-r--r-- | Documentation/power/userland-swsusp.txt | 2 |
4 files changed, 12 insertions, 6 deletions
diff --git a/Documentation/power/pm_qos_interface.txt b/Documentation/power/pm_qos_interface.txt index a5da5c7e7128..129f7c0e1483 100644 --- a/Documentation/power/pm_qos_interface.txt +++ b/Documentation/power/pm_qos_interface.txt @@ -5,7 +5,8 @@ performance expectations by drivers, subsystems and user space applications on one of the parameters. Two different PM QoS frameworks are available: -1. PM QoS classes for cpu_dma_latency, network_latency, network_throughput. +1. PM QoS classes for cpu_dma_latency, network_latency, network_throughput, +memory_bandwidth. 2. the per-device PM QoS framework provides the API to manage the per-device latency constraints and PM QoS flags. @@ -13,6 +14,7 @@ Each parameters have defined units: * latency: usec * timeout: usec * throughput: kbs (kilo bit / sec) + * memory bandwidth: mbs (mega bit / sec) 1. PM QoS framework diff --git a/Documentation/power/runtime_pm.txt b/Documentation/power/runtime_pm.txt index f32ce5419573..44fe1d28a163 100644 --- a/Documentation/power/runtime_pm.txt +++ b/Documentation/power/runtime_pm.txt @@ -229,13 +229,13 @@ defined in include/linux/pm.h: - if set, the value of child_count is ignored (but still updated) unsigned int disable_depth; - - used for disabling the helper funcions (they work normally if this is + - used for disabling the helper functions (they work normally if this is equal to zero); the initial value of it is 1 (i.e. runtime PM is initially disabled for all devices) int runtime_error; - if set, there was a fatal error (one of the callbacks returned error code - as described in Section 2), so the helper funtions will not work until + as described in Section 2), so the helper functions will not work until this flag is cleared; this is the error code returned by the failing callback @@ -468,6 +468,10 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h: - set the power.irq_safe flag for the device, causing the runtime-PM callbacks to be invoked with interrupts off + bool pm_runtime_is_irq_safe(struct device *dev); + - return true if power.irq_safe flag was set for the device, causing + the runtime-PM callbacks to be invoked with interrupts off + void pm_runtime_mark_last_busy(struct device *dev); - set the power.last_busy field to the current time @@ -524,7 +528,7 @@ pm_runtime_put_sync_autosuspend() 5. Runtime PM Initialization, Device Probing and Removal Initially, the runtime PM is disabled for all devices, which means that the -majority of the runtime PM helper funtions described in Section 4 will return +majority of the runtime PM helper functions described in Section 4 will return -EAGAIN until pm_runtime_enable() is called for the device. In addition to that, the initial runtime PM status of all devices is diff --git a/Documentation/power/suspend-and-interrupts.txt b/Documentation/power/suspend-and-interrupts.txt index 69663640dea5..2f9c5a5fcb25 100644 --- a/Documentation/power/suspend-and-interrupts.txt +++ b/Documentation/power/suspend-and-interrupts.txt @@ -77,7 +77,7 @@ Calling enable_irq_wake() causes suspend_device_irqs() to treat the given IRQ in a special way. Namely, the IRQ remains enabled, by on the first interrupt it will be disabled, marked as pending and "suspended" so that it will be re-enabled by resume_device_irqs() during the subsequent system resume. Also -the PM core is notified about the event which casues the system suspend in +the PM core is notified about the event which causes the system suspend in progress to be aborted (that doesn't have to happen immediately, but at one of the points where the suspend thread looks for pending wakeup events). diff --git a/Documentation/power/userland-swsusp.txt b/Documentation/power/userland-swsusp.txt index 0e870825c1b9..bbfcd1bbedc5 100644 --- a/Documentation/power/userland-swsusp.txt +++ b/Documentation/power/userland-swsusp.txt @@ -99,7 +99,7 @@ SNAPSHOT_S2RAM - suspend to RAM; using this call causes the kernel to The device's read() operation can be used to transfer the snapshot image from the kernel. It has the following limitations: - you cannot read() more than one virtual memory page at a time -- read()s across page boundaries are impossible (ie. if ypu read() 1/2 of +- read()s across page boundaries are impossible (ie. if you read() 1/2 of a page in the previous call, you will only be able to read() _at_ _most_ 1/2 of the page in the next call) |