aboutsummaryrefslogtreecommitdiffstats
path: root/fs/btrfs/scrub.c
AgeCommit message (Collapse)Author
2016-07-26btrfs: plumb fs_info into btrfs_workJeff Mahoney
In order to provide an fsid for trace events, we'll need a btrfs_fs_info pointer. The most lightweight way to do that for btrfs_work structures is to associate it with the __btrfs_workqueue structure. Each queued btrfs_work structure has a workqueue associated with it, so that's a natural fit. It's a privately defined structures, so we add accessors to retrieve the fs_info pointer. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-07-26Btrfs: subpage-blocksize: Rate limit scrub error messageChandan Rajendra
btrfs/073 invokes scrub ioctl in a tight loop. In subpage-blocksize scenario this results in a lot of "scrub: size assumption sectorsize != PAGE_SIZE " messages being printed on the console. To reduce the number of such messages this commit uses btrfs_err_rl() instead of btrfs_err(). Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-05-30Btrfs: fix race setting block group back to RW mode during device replaceFilipe Manana
After it finishes processing a device extent, the device replace code sets back the block group to RW mode and then after that it sets the left cursor to match the logical end address of the block group, so that future writes into extents belonging to the block group go both the source (old) and target (new) devices. However from the moment we turn the block group back to RW mode we have a short time window, that lasts until we update the left cursor's value, where extents can be allocated from the block group and written to, in which case they will not be copied/written to the target (new) device. Fix this by updating the left cursor's value before turning the block group back to RW mode. Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: Josef Bacik <jbacik@fb.com>
2016-05-30Btrfs: fix unprotected assignment of the left cursor for device replaceFilipe Manana
We were assigning new values to fields of the device replace object without holding the respective lock after processing each device extent. This is important for the left cursor field which can be accessed by a concurrent task running __btrfs_map_block (which, correctly, takes the device replace lock). So change these fields while holding the device replace lock. Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: Josef Bacik <jbacik@fb.com>
2016-05-30Btrfs: fix race setting block group readonly during device replaceFilipe Manana
When we do a device replace, for each device extent we find from the source device, we set the corresponding block group to readonly mode to prevent writes into it from happening while we are copying the device extent from the source to the target device. However just before we set the block group to readonly mode some concurrent task might have already allocated an extent from it or decided it could perform a nocow write into one of its extents, which can make the device replace process to miss copying an extent since it uses the extent tree's commit root to search for extents and only once it finishes searching for all extents belonging to the block group it does set the left cursor to the logical end address of the block group - this is a problem if the respective ordered extents finish while we are searching for extents using the extent tree's commit root and no transaction commit happens while we are iterating the tree, since it's the delayed references created by the ordered extents (when they complete) that insert the extent items into the extent tree (using the non-commit root of course). Example: CPU 1 CPU 2 btrfs_dev_replace_start() btrfs_scrub_dev() scrub_enumerate_chunks() --> finds device extent belonging to block group X <transaction N starts> starts buffered write against some inode writepages is run against that inode forcing dellaloc to run btrfs_writepages() extent_writepages() extent_write_cache_pages() __extent_writepage() writepage_delalloc() run_delalloc_range() cow_file_range() btrfs_reserve_extent() --> allocates an extent from block group X (which is not yet in RO mode) btrfs_add_ordered_extent() --> creates ordered extent Y flush_epd_write_bio() --> bio against the extent from block group X is submitted btrfs_inc_block_group_ro(bg X) --> sets block group X to readonly scrub_chunk(bg X) scrub_stripe(device extent from srcdev) --> keeps searching for extent items belonging to the block group using the extent tree's commit root --> it never blocks due to fs_info->scrub_pause_req as no one tries to commit transaction N --> copies all extents found from the source device into the target device --> finishes search loop bio completes ordered extent Y completes and creates delayed data reference which will add an extent item to the extent tree when run (typically at transaction commit time) --> so the task doing the scrub/device replace at CPU 1 misses this and does not copy this extent into the new/target device btrfs_dec_block_group_ro(bg X) --> turns block group X back to RW mode dev_replace->cursor_left is set to the logical end offset of block group X So fix this by waiting for all cow and nocow writes after setting a block group to readonly mode. Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: Josef Bacik <jbacik@fb.com>
2016-05-25Merge branch 'cleanups-4.7' into for-chris-4.7-20160525David Sterba
2016-05-25btrfs: fix string and comment grammatical issues and typosNicholas D Steeves
Signed-off-by: Nicholas D Steeves <nsteeves@gmail.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-05-25btrfs: scrub: Set bbio to NULL before calling btrfs_map_blockZhao Lei
We usually call btrfs_put_bbio() when btrfs_map_block() failed, btrfs_put_bbio() works right whether bbio is a valid value, or NULL. But there is a exception, in some case, btrfs_map_block() will return fail without touching *bbio(keeping its original value), and if bbio was not initialized yet, invalid memory accessing will happened. Above case is in scrub_missing_raid56_pages(), and similar case in scrub_raid56_parity(). Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-05-16btrfs: fix memory leak during RAID 5/6 device replacementScott Talbert
A 'struct bio' is allocated in scrub_missing_raid56_pages(), but it was never freed anywhere. Signed-off-by: Scott Talbert <scott.talbert@hgst.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-05-06btrfs: Fix BUG_ON condition in scrub_setup_recheck_block()Ashish Samant
pagev array in scrub_block{} is of size SCRUB_MAX_PAGES_PER_BLOCK. page_index should be checked with the same to trigger BUG_ON(). Signed-off-by: Ashish Samant <ashish.samant@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-05-06Btrfs: fix divide error upon chunk's stripe_lenLiu Bo
The struct 'map_lookup' uses type int for @stripe_len, while btrfs_chunk_stripe_len() can return a u64 value, and it may end up with @stripe_len being undefined value and it can lead to 'divide error' in __btrfs_map_block(). This changes 'map_lookup' to use type u64 for stripe_len, also right now we only use BTRFS_STRIPE_LEN for stripe_len, so this adds a valid checker for BTRFS_STRIPE_LEN. Reported-by: Vegard Nossum <vegard.nossum@oracle.com> Reported-by: Quentin Casasnovas <quentin.casasnovas@oracle.com> Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> [ folded division fix to scrub_raid56_parity ] Signed-off-by: David Sterba <dsterba@suse.com>
2016-05-06btrfs: reuse existing variable in scrub_stripe, reduce stack usageDavid Sterba
The key variable occupies 17 bytes, the key_start is used once, we can simply reuse existing 'key' for that purpose. As the key is not a simple type, compiler doest not do it on itself. Signed-off-by: David Sterba <dsterba@suse.com>
2016-04-29btrfs: sink gfp parameter to clear_extent_bitsDavid Sterba
Callers pass GFP_NOFS and GFP_KERNEL. No need to pass the flags around. Signed-off-by: David Sterba <dsterba@suse.com>
2016-04-29btrfs: sink gfp parameter to set_extent_bitsDavid Sterba
All callers pass GFP_NOFS. Signed-off-by: David Sterba <dsterba@suse.com>
2016-04-04mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macrosKirill A. Shutemov
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-11btrfs: scrub: silence an uninitialized variable warningDan Carpenter
It's basically harmless if "ref_level" isn't initialized since it's only used for an error message, but it causes a static checker warning. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-02-26Merge branch 'foreign/liubo/replace-lockup' into for-chris-4.6David Sterba
2016-02-23Btrfs: fix lockdep deadlock warning due to dev_replaceLiu Bo
Xfstests btrfs/011 complains about a deadlock warning, [ 1226.649039] ========================================================= [ 1226.649039] [ INFO: possible irq lock inversion dependency detected ] [ 1226.649039] 4.1.0+ #270 Not tainted [ 1226.649039] --------------------------------------------------------- [ 1226.652955] kswapd0/46 just changed the state of lock: [ 1226.652955] (&delayed_node->mutex){+.+.-.}, at: [<ffffffff81458735>] __btrfs_release_delayed_node+0x45/0x1d0 [ 1226.652955] but this lock took another, RECLAIM_FS-unsafe lock in the past: [ 1226.652955] (&fs_info->dev_replace.lock){+.+.+.} and interrupts could create inverse lock ordering between them. [ 1226.652955] other info that might help us debug this: [ 1226.652955] Chain exists of: &delayed_node->mutex --> &found->groups_sem --> &fs_info->dev_replace.lock [ 1226.652955] Possible interrupt unsafe locking scenario: [ 1226.652955] CPU0 CPU1 [ 1226.652955] ---- ---- [ 1226.652955] lock(&fs_info->dev_replace.lock); [ 1226.652955] local_irq_disable(); [ 1226.652955] lock(&delayed_node->mutex); [ 1226.652955] lock(&found->groups_sem); [ 1226.652955] <Interrupt> [ 1226.652955] lock(&delayed_node->mutex); [ 1226.652955] *** DEADLOCK *** Commit 084b6e7c7607 ("btrfs: Fix a lockdep warning when running xfstest.") tried to fix a similar one that has the exactly same warning, but with that, we still run to this. The above lock chain comes from btrfs_commit_transaction ->btrfs_run_delayed_items ... ->__btrfs_update_delayed_inode ... ->__btrfs_cow_block ... ->find_free_extent ->cache_block_group ->load_free_space_cache ->btrfs_readpages ->submit_one_bio ... ->__btrfs_map_block ->btrfs_dev_replace_lock However, with high memory pressure, tasks which hold dev_replace.lock can be interrupted by kswapd and then kswapd is intended to release memory occupied by superblock, inodes and dentries, where we may call evict_inode, and it comes to [ 1226.652955] [<ffffffff81458735>] __btrfs_release_delayed_node+0x45/0x1d0 [ 1226.652955] [<ffffffff81459e74>] btrfs_remove_delayed_node+0x24/0x30 [ 1226.652955] [<ffffffff8140c5fe>] btrfs_evict_inode+0x34e/0x700 delayed_node->mutex may be acquired in __btrfs_release_delayed_node(), and it leads to a ABBA deadlock. To fix this, we can use "blocking rwlock" used in the case of extent_buffer, but things are simpler here since we only needs read's spinlock to blocking lock. With this, btrfs/011 no more produces warnings in dmesg. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-02-11btrfs: scrub: use GFP_KERNEL on the submission pathDavid Sterba
Scrub is not on the critical writeback path we don't need to use GFP_NOFS for all allocations. The failures are handled and stats passed back to userspace. Let's use GFP_KERNEL on the paths where everything is ok, ie. setup the global structures and the IO submission paths. Functions that do the repair and fixups still use GFP_NOFS as we might want to skip any other filesystem activity if we encounter an error. This could turn out to be unnecessary, but requires more review compared to the easy cases in this patch. Signed-off-by: David Sterba <dsterba@suse.com>
2016-01-22wrappers for ->i_mutex accessAl Viro
parallel to mutex_{lock,unlock,trylock,is_locked,lock_nested}, inode_foo(inode) being mutex_foo(&inode->i_mutex). Please, use those for access to ->i_mutex; over the coming cycle ->i_mutex will become rwsem, with ->lookup() done with it held only shared. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-20btrfs: Fix calculation of rbio->dbitmap's size calculationZhao Lei
Current code is trying to calculate rbio->dbitmap's size to make it align to sizeof(long), but implement haven't achived this object, it is align to sizeof(char) instead. This patch fixed above calculation, and use sizeof(long) instead of fixed "8" to increate compatibility. Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com> Signed-off-by: Chris Mason <clm@fb.com>
2016-01-19Merge branch 'misc-cleanups-4.5' of ↵Chris Mason
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux into for-linus-4.5
2016-01-15btrfs: cleanup, stop casting for extent_map->lookup everywhereJeff Mahoney
Overloading extent_map->bdev to struct map_lookup * might have started out as a means to an end, but it's a pattern that's used all over the place now. Let's get rid of the casting and just add a union instead. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-01-11Merge branch 'misc-cleanups-4.5' of ↵Chris Mason
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux into for-linus-4.5 Signed-off-by: Chris Mason <clm@fb.com>
2016-01-11Merge branch 'misc-for-4.5' of ↵Chris Mason
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux into for-linus-4.5
2016-01-07btrfs: cleanup, use enum values for btrfs_path readaDavid Sterba
Replace the integers by enums for better readability. The value 2 does not have any meaning since a717531942f488209dded30f6bc648167bcefa72 "Btrfs: do less aggressive btree readahead" (2009-01-22). Signed-off-by: David Sterba <dsterba@suse.com>
2016-01-07btrfs: cleanup, remove stray return statementsDavid Sterba
Signed-off-by: David Sterba <dsterba@suse.com>
2016-01-07btrfs: drop duplicate prefix from scrub workqueuesDavid Sterba
The helper btrfs_alloc_workqueue will add the "btrfs-" prefix. Signed-off-by: David Sterba <dsterba@suse.com>
2015-12-23Merge branch 'dev/simplify-set-bit' of ↵Chris Mason
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux into for-linus-4.5 Signed-off-by: Chris Mason <clm@fb.com>
2015-12-03btrfs: drop unused parameter from lock_extent_bitsDavid Sterba
We've always passed 0. Stack usage will slightly decrease. Signed-off-by: David Sterba <dsterba@suse.com>
2015-11-25Btrfs: fix scrub preventing unused block groups from being deletedFilipe Manana
Currently scrub can race with the cleaner kthread when the later attempts to delete an unused block group, and the result is preventing the cleaner kthread from ever deleting later the block group - unless the block group becomes used and unused again. The following diagram illustrates that race: CPU 1 CPU 2 cleaner kthread btrfs_delete_unused_bgs() gets block group X from fs_info->unused_bgs and removes it from that list scrub_enumerate_chunks() searches device tree using its commit root finds device extent for block group X gets block group X from the tree fs_info->block_group_cache_tree (via btrfs_lookup_block_group()) sets bg X to RO sees the block group is already RO and therefore doesn't delete it nor adds it back to unused list So fix this by making scrub add the block group again to the list of unused block groups if the block group is still unused when it finished scrubbing it and it hasn't been removed already. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2015-11-25Btrfs: fix race between scrub and block group deletionFilipe Manana
Scrub can race with the cleaner kthread deleting block groups that are unused (and with relocation too) leading to a failure with error -EINVAL that gets returned to user space. The following diagram illustrates how it happens: CPU 1 CPU 2 cleaner kthread btrfs_delete_unused_bgs() gets block group X from fs_info->unused_bgs sets block group to RO btrfs_remove_chunk(bg X) deletes device extents scrub_enumerate_chunks() searches device tree using its commit root finds device extent for block group X gets block group X from the tree fs_info->block_group_cache_tree (via btrfs_lookup_block_group()) sets bg X to RO (again) btrfs_remove_block_group(bg X) deletes block group from fs_info->block_group_cache_tree removes extent map from fs_info->mapping_tree scrub_chunk(offset X) searches fs_info->mapping_tree for extent map starting at offset X --> doesn't find any such extent map --> returns -EINVAL and scrub errors out to userspace with -EINVAL Fix this by dealing with an extent map lookup failure as an indicator of block group deletion. Issue reproduced with fstest btrfs/071. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2015-11-25btrfs: Continue replace when set_block_ro failedZhaolei
xfstests/011 failed in node with small_size filesystem. Can be reproduced by following script: DEV_LIST="/dev/vdd /dev/vde" DEV_REPLACE="/dev/vdf" do_test() { local mkfs_opt="$1" local size="$2" dmesg -c >/dev/null umount $SCRATCH_MNT &>/dev/null echo mkfs.btrfs -f $mkfs_opt "${DEV_LIST[*]}" mkfs.btrfs -f $mkfs_opt "${DEV_LIST[@]}" || return 1 mount "${DEV_LIST[0]}" $SCRATCH_MNT echo -n "Writing big files" dd if=/dev/urandom of=$SCRATCH_MNT/t0 bs=1M count=1 >/dev/null 2>&1 for ((i = 1; i <= size; i++)); do echo -n . /bin/cp $SCRATCH_MNT/t0 $SCRATCH_MNT/t$i || return 1 done echo echo Start replace btrfs replace start -Bf "${DEV_LIST[0]}" "$DEV_REPLACE" $SCRATCH_MNT || { dmesg return 1 } return 0 } # Set size to value near fs size # for example, 1897 can trigger this bug in 2.6G device. # ./do_test "-d raid1 -m raid1" 1897 System will report replace fail with following warning in dmesg: [ 134.710853] BTRFS: dev_replace from /dev/vdd (devid 1) to /dev/vdf started [ 135.542390] BTRFS: btrfs_scrub_dev(/dev/vdd, 1, /dev/vdf) failed -28 [ 135.543505] ------------[ cut here ]------------ [ 135.544127] WARNING: CPU: 0 PID: 4080 at fs/btrfs/dev-replace.c:428 btrfs_dev_replace_start+0x398/0x440() [ 135.545276] Modules linked in: [ 135.545681] CPU: 0 PID: 4080 Comm: btrfs Not tainted 4.3.0 #256 [ 135.546439] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.2-0-g33fbe13 by qemu-project.org 04/01/2014 [ 135.547798] ffffffff81c5bfcf ffff88003cbb3d28 ffffffff817fe7b5 0000000000000000 [ 135.548774] ffff88003cbb3d60 ffffffff810a88f1 ffff88002b030000 00000000ffffffe4 [ 135.549774] ffff88003c080000 ffff88003c082588 ffff88003c28ab60 ffff88003cbb3d70 [ 135.550758] Call Trace: [ 135.551086] [<ffffffff817fe7b5>] dump_stack+0x44/0x55 [ 135.551737] [<ffffffff810a88f1>] warn_slowpath_common+0x81/0xc0 [ 135.552487] [<ffffffff810a89e5>] warn_slowpath_null+0x15/0x20 [ 135.553211] [<ffffffff81448c88>] btrfs_dev_replace_start+0x398/0x440 [ 135.554051] [<ffffffff81412c3e>] btrfs_ioctl+0x1d2e/0x25c0 [ 135.554722] [<ffffffff8114c7ba>] ? __audit_syscall_entry+0xaa/0xf0 [ 135.555506] [<ffffffff8111ab36>] ? current_kernel_time64+0x56/0xa0 [ 135.556304] [<ffffffff81201e3d>] do_vfs_ioctl+0x30d/0x580 [ 135.557009] [<ffffffff8114c7ba>] ? __audit_syscall_entry+0xaa/0xf0 [ 135.557855] [<ffffffff810011d1>] ? do_audit_syscall_entry+0x61/0x70 [ 135.558669] [<ffffffff8120d1c1>] ? __fget_light+0x61/0x90 [ 135.559374] [<ffffffff81202124>] SyS_ioctl+0x74/0x80 [ 135.559987] [<ffffffff81809857>] entry_SYSCALL_64_fastpath+0x12/0x6f [ 135.560842] ---[ end trace 2a5c1fc3205abbdd ]--- Reason: When big data writen to fs, the whole free space will be allocated for data chunk. And operation as scrub need to set_block_ro(), and when there is only one metadata chunk in system(or other metadata chunks are all full), the function will try to allocate a new chunk, and failed because no space in device. Fix: When set_block_ro failed for metadata chunk, it is not a problem because scrub_lock paused commit_trancaction in same time, and metadata are always cowed, so the on-the-fly writepages will not write data into same place with scrub/replace. Let replace continue in this case is no problem. Tested by above script, and xfstests/011, plus 100 times xfstests/070. Changelog v1->v2: 1: Add detail comments in source and commit-message. 2: Add dmesg detail into commit-message. 3: Limit return value of -ENOSPC to be passed. All suggested by: Filipe Manana <fdmanana@gmail.com> Suggested-by: Filipe Manana <fdmanana@gmail.com> Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com> Signed-off-by: Chris Mason <clm@fb.com>
2015-11-10btrfs: Remove len argument from scrub_find_csumZhao Lei
It is useless. Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com> Signed-off-by: Chris Mason <clm@fb.com>
2015-11-10btrfs: Reduce unnecessary arguments in scrub_recheck_blockZhao Lei
We don't need pass so many arguments for recheck sblock now, this patch cleans them. Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com> Signed-off-by: Chris Mason <clm@fb.com>
2015-11-10btrfs: Use scrub_checksum_data and scrub_checksum_tree_block for ↵Zhao Lei
scrub_recheck_block_checksum We can use existing scrub_checksum_data() and scrub_checksum_tree_block() for scrub_recheck_block_checksum(), instead of write duplicated code. Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com> Signed-off-by: Chris Mason <clm@fb.com>
2015-11-10btrfs: Reset sblock->xxx_error stats before calling scrub_recheck_block_checksumZhao Lei
We should reset sblock->xxx_error stats before calling scrub_recheck_block_checksum(). Current code run correctly because all sblock are allocated by k[cz]alloc(), and the error stats are not got changed. Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com> Signed-off-by: Chris Mason <clm@fb.com>
2015-11-10btrfs: scrub: setup all fields for sblock_to_checkZhao Lei
scrub_setup_recheck_block() isn't setup all necessary fields for sblock_to_check because history reason. So current code need more arguments in severial functions, and more local variables, just to passing these lacked values to necessary place. This patch setup above fields to sblock_to_check in scrub_setup_recheck_block(), for: 1: more cleanup for function arg, local variable 2: to make sblock_to_check complete, then we can use sblock_to_check without concern about some uninitialized member. Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com> Signed-off-by: Chris Mason <clm@fb.com>
2015-11-10btrfs: scrub: set error stats when tree block spanning stripesZhao Lei
It is better to show error stats to user when we found tree block spanning stripes. On a btrfs created by old version of btrfs-convert: Before patch: # btrfs scrub start -B /dev/vdh scrub done for 8b342d35-2904-41ab-b3cb-2f929709cf47 scrub started at Tue Aug 25 21:19:09 2015 and finished after 00:00:00 total bytes scrubbed: 53.54MiB with 0 errors # dmesg ... [ 128.711434] BTRFS error (device vdh): scrub: tree block 27054080 spanning stripes, ignored. logical=27000832 [ 128.712744] BTRFS error (device vdh): scrub: tree block 27054080 spanning stripes, ignored. logical=27066368 ... After patch: # btrfs scrub start -B /dev/vdh scrub done for ff7f844b-7a4e-4b1a-88a9-8252ab25be1b scrub started at Tue Aug 25 21:42:29 2015 and finished after 00:00:00 total bytes scrubbed: 53.60MiB with 2 errors error details: corrected errors: 0, uncorrectable errors: 2, unverified errors: 0 ERROR: There are uncorrectable errors. # dmesg ...omit... # Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com> Signed-off-by: Chris Mason <clm@fb.com>
2015-10-08btrfs: switch message printers to ratelimited variantsDavid Sterba
Signed-off-by: David Sterba <dsterba@suse.com>
2015-10-08btrfs: switch message printers to ratelimited _in_rcu variantsDavid Sterba
Signed-off-by: David Sterba <dsterba@suse.com>
2015-10-08btrfs: switch message printers to _in_rcu variantsDavid Sterba
Signed-off-by: David Sterba <dsterba@suse.com>
2015-09-11Merge branch 'for-linus-4.3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs cleanups and fixes from Chris Mason: "These are small cleanups, and also some fixes for our async worker thread initialization. I was having some trouble testing these, but it ended up being a combination of changing around my test servers and a shiny new schedule while atomic from the new start/finish_plug in writeback_sb_inodes(). That one only hits on btrfs raid5/6 or MD raid10, and if I wasn't changing a bunch of things in my test setup at once it would have been really clear. Fix for writeback_sb_inodes() on the way as well" * 'for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: cleanup: remove unnecessary check before btrfs_free_path is called btrfs: async_thread: Fix workqueue 'max_active' value when initializing btrfs: Add raid56 support for updating num_tolerated_disk_barrier_failures in btrfs_balance btrfs: Cleanup for btrfs_calc_num_tolerated_disk_barrier_failures btrfs: Remove noused chunk_tree and chunk_objectid from scrub_enumerate_chunks and scrub_chunk btrfs: Update out-of-date "skip parity stripe" comment
2015-09-05Merge branch 'for-linus-4.3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs updates from Chris Mason: "This has Jeff Mahoney's long standing trim patch that fixes corners where trims were missing. Omar has some raid5/6 fixes, especially for using scrub and device replace when devices are missing. Zhao Lie continues cleaning and fixing things, this series fixes some really hard to hit corners in xfstests. I had to pull it last merge window due to some deadlocks, but those are now resolved. I added support for Tejun's new blkio controllers. It seems to work well for single devices, we'll expand to multi-device as well" * 'for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (47 commits) btrfs: fix compile when block cgroups are not enabled Btrfs: fix file read corruption after extent cloning and fsync Btrfs: check if previous transaction aborted to avoid fs corruption btrfs: use __GFP_NOFAIL in alloc_btrfs_bio btrfs: Prevent from early transaction abort btrfs: Remove unused arguments in tree-log.c btrfs: Remove useless condition in start_log_trans() Btrfs: add support for blkio controllers Btrfs: remove unused mutex from struct 'btrfs_fs_info' Btrfs: fix parity scrub of RAID 5/6 with missing device Btrfs: fix device replace of a missing RAID 5/6 device Btrfs: add RAID 5/6 BTRFS_RBIO_REBUILD_MISSING operation Btrfs: count devices correctly in readahead during RAID 5/6 replace Btrfs: remove misleading handling of missing device scrub btrfs: fix clone / extent-same deadlocks Btrfs: fix defrag to merge tail file extent Btrfs: fix warning in backref walking btrfs: Add WARN_ON() for double lock in btrfs_tree_lock() btrfs: Remove root argument in extent_data_ref_count() btrfs: Fix wrong comment of btrfs_alloc_tree_block() ...
2015-08-31btrfs: Remove noused chunk_tree and chunk_objectid from ↵Zhao Lei
scrub_enumerate_chunks and scrub_chunk These variables are not used from introduced version, remove them. Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com> Signed-off-by: Chris Mason <clm@fb.com>
2015-08-31btrfs: Update out-of-date "skip parity stripe" commentZhao Lei
Because btrfs support scrub raid56 parity stripe now. Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com> Signed-off-by: Chris Mason <clm@fb.com>
2015-08-13block: remove bio_get_nr_vecs()Kent Overstreet
We can always fill up the bio now, no need to estimate the possible size based on queue parameters. Acked-by: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> [hch: rebased and wrote a changelog] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ming Lin <ming.l@ssi.samsung.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-09Btrfs: fix parity scrub of RAID 5/6 with missing deviceOmar Sandoval
When testing the previous patch, Zhao Lei reported a similar bug when attempting to scrub a degraded RAID 5/6 filesystem with a missing device, leading to NULL pointer dereferences from the RAID 5/6 parity scrubbing code. The first cause was the same as in the previous patch: attempting to call bio_add_page() on a missing block device. To fix this, scrub_extent_for_parity() can just mark the sectors on the missing device as errors instead of attempting to read from it. Additionally, the code uses scrub_remap_extent() to map the extent of the corresponding data stripe, but the extent wasn't already mapped. If scrub_remap_extent() finds a missing block device, it doesn't initialize extent_dev, so we're left with a NULL struct btrfs_device. The solution is to use btrfs_map_block() directly. Reported-by: Zhao Lei <zhaolei@cn.fujitsu.com> Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
2015-08-09Btrfs: fix device replace of a missing RAID 5/6 deviceOmar Sandoval
The original implementation of device replace on RAID 5/6 seems to have missed support for replacing a missing device. When this is attempted, we end up calling bio_add_page() on a bio with a NULL ->bi_bdev, which crashes when we try to dereference it. This happens because btrfs_map_block() has no choice but to return us the missing device because RAID 5/6 don't have any alternate mirrors to read from, and a missing device has a NULL bdev. The idea implemented here is to handle the missing device case separately, which better only happen when we're replacing a missing RAID 5/6 device. We use the new BTRFS_RBIO_REBUILD_MISSING operation to reconstruct the data from parity, check it with scrub_recheck_block_checksum(), and write it out with scrub_write_block_to_dev_replace(). Reported-by: Philip <bugzilla@philip-seeger.de> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=96141 Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
2015-08-09Btrfs: add RAID 5/6 BTRFS_RBIO_REBUILD_MISSING operationOmar Sandoval
The current RAID 5/6 recovery code isn't quite prepared to handle missing devices. In particular, it expects a bio that we previously attempted to use in the read path, meaning that it has valid pages allocated. However, missing devices have a NULL blkdev, and we can't call bio_add_page() on a bio with a NULL blkdev. We could do manual manipulation of bio->bi_io_vec, but that's pretty gross. So instead, add a separate path that allows us to manually add pages to the rbio. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-05-23 10:38:26 +0000