| Age | Commit message (Collapse) | Author |
|---|
|
If a SHUTDOWN message has caused us to set the "die_peacefully" flag,
but there are new clients waiting, cancel the shutdown.
|
|
A partially-implemented profiler for client time, which basically just
inserts (optional) gettimeofday calls in various places and stashes data
in a flat file containing one data block per pid.
Signed-off-by: Peter Seebach <peter.seebach@windriver.com>
|
|
Initial, incomplete, support for extended attributes. Extended
attributes are implemented fairly naively, using a second table
in the file database using the primary file table's id as a
foreign key. The ON DELETE CASCADE behavior requires sqlite 3.6.19
or later with foreign key and trigger support compiled in.
To reduce round-trips, the client does not check for existing
attributes, but rather, sends three distinct set messages;
OP_SET_XATTR, OP_CREATE_XATTR, OP_REPLACE_XATTR. A SET message
always succeeds, a CREATE fails if the attribute already
exists, and a REPLACE fails if the attribute does not already
exist.
The /* flags */ feature of makewrappers is used to correct
path names appropriately, so all functions are already working
with complete paths, and can always use functions that work
on links; if they were supposed to dereference, the path
fixup code got that.
The xattr support is enabled, for now, conditional on
whether getfattr --help succeeds.
Not yet implemented: Translation for system.posix_acl_access,
which is used by "cp -a" (or "cp --preserve-all") on some
systems to try to copy modes.
Signed-off-by: Peter Seebach <peter.seebach@windriver.com>
|
|
This is a moderately intrusive change. The basic overall effect:
Debugging messages are now controlled, not by a numeric "level",
but by a series of flags, which are expressed as a string of
letters. Each flag has a single-letter form used for string
specifications, a name, a description, a numeric value (1 through N),
and a flag value (which is 1 << the numeric value). (This does mean
that no flag has the value 1, so we only have 31 bits available.
Tiny violins play.)
The other significant change is that the pseudo_debug calls
are now implemented with a do/while macro containing a conditional,
so that computationally-expensive arguments are never evaluated
if the corresponding debug flags weren't set. The assumption is
that in the vast majority of cases (specifically, all of them
so far) the debug flags for a given call are a compile-time constant,
so the nested conditional will never actually show up in code
when compiled with optimization; we'll just see the appropriate
conditional test.
The VERBOSE flag is magical, in that if the VERBOSE flag is
used in a message, the debug flags have to have both VERBOSE and
at least one other flag for the call to be made.
This should dramatically improve performance for a lot of cases
without as much need for PSEUDO_NDEBUG, and improve the ability of
users to get coherent debugging output that means something and is
relevant to a given case.
It's also intended to set the stage for future development work
involving improving the clarity and legibility of pseudo's diagnostic
messages in general.
Old things which used numeric values for PSEUDO_DEBUG will sort
of continue to work, though they will almost always be less verbose
than they used to. There should probably be a pass through adding
"| PDBGF_CONSISTENCY" to a lot of the messages that are specific
to some other type.
|
|
Most pseudo operations don't actually USE the server's response. So
why wait for a response?
This patch introduces a new message type, PSEUDO_MSG_FASTOP. It
also tags pseudo operation types with whether or not they need to
give a response. This requires updates to maketables to allow non-string
types for additional columns, and the addition of some quotes to the
SQL query enums/query_type.in table.
A few routines are altered to change their behavior and whether or not
they perform a stat operation. The only operations that do wait are
OP_FSTAT and OP_STAT, OP_MKNOD, and OP_MAY_UNLINK. Rationale:
You can't query the server for replacement information and not wait for
it. Makes no sense.
There's extra checking in mknod, because we really do want to fail out
if we couldn't do that -- that implies that we haven't created a thing
that will look like a node.
The result from OP_MAY_UNLINK is checked because it's used to determine
whether we need to send a DID_UNLINK or CANCEL_UNLINK. It might be cheaper
to send two messages without waiting than to send one, wait, and maybe
send another, but I don't want to send invalid messages.
This is highly experimental.
|
|
It turns out that file databases don't get very large, and that
sqlite3 can be quite fast with an in-memory database. It also turns
out that dumping the database to disk on exit (or during idle times)
is pretty cheap compared to constant updates.
So: We add "--enable-memory-db", which defaults to on if you have
sqlite 3.7 or later, and off for 3.6 (because 3.6 has horrible
performance with in-memory db on some hosts we tried).
|
|
debugger messages from going to the wrong place. No longer fclose(stderr)
after grabbing log file, because stderr is likely still using fd 2.
|
|
This is a spiffied-up rebase of a bunch of intermediate changes, presented
as a whole because it is, surprisingly, less confusing that way. The basic
idea is to separate the guts code into categories ranging from generic
stuff that can be the same everywhere and specific variants. The big scary
one is the Darwin support, which actually seems to run okay on 64-bit OS X
10.6. (No other variants were tested.) The other example given is support
for the old clone() syscall on RHEL 4, which affects some wrlinux use cases.
There's a few minor cleanup bits here, such as a function with inconsistent
calling conventions, but nothing really exciting.
|
|
* (mhatle) Add guts/clone.c to cleanup the clone support
* (mhatle) guts/clone.c only run setupenv and reinit when NOT PSEUDO_RELOADED
* (mhatle) guts/execve.c whitespace fixe
* (mhatle) guts/fork.c similar to guts/clone.c change
* (mhatle) pseudo_client.c add reinit function
* (mhatle) pseudo_client.c revise client reset, include code from pseudo_wrappers.c
* (mhatle) pseudo_server.c move the pid writing to the parent
* (mhatle) pseudo_wrappers.c clone cleanup and populate cleanup
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
|
|
Add PSEUDO_BINDIR, PSEUDO_LIBDIR, and PSEUDO_LOCALSTATEDIR to allow for more
easy customization of PSEUDO components at run-time. If these are not set
they will be automatically generated based on the existing PSEUDO_PREFIX path.
PSEUDO_BINDIR = PSEUDO_PREFIX /bin
PSEUDO_LIBDIR = PSEUDO_PREFIX /lib
PSEUDO_LOCALSTATEDIR = PSEUDO_PREFIX /var/pseudo
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
|
|
The PSEUDO_DEBUG_FILE feature is enhanced, and is now also used by the
pseudo server.
|
|
Send program name (program_invocation_name from glibc) along with the
tag.
Along the way, restructure the fds/pids/tags arrays to be an array
of client structures in pseudo_server, and add the message type
to the set of things logged -- logging that a message was a ping is
more useful than appending the text "ping" to it. Add support
for type and program to pseudolog.
Add deletion to pseudolog.
Handle usage message formatting when there's an odd number of known
specifiers for pseudolog.
Conflicts:
ChangeLog.txt
pseudo_server.c
|
|
* Add lckpwdf/ulckpwdf to guts/README
* Remove arguments from function pointer arguments.
While in theory the compar function pointer has always taken
"const struct dirent **", some systems (many) have declared
it instead as taking "const void *". For now, just omit
the types; a pointer to function taking unknown arguments
is a compatible type, and we never call the functions, we
just pass them to something else.
* Handle readlinkat() on systems without *at functions
* Fix pseudo_etc_file (spotted by "fortify")
When O_CREAT can be a flag, 0600 mode is needed. While we're
at it, remove a bogus dummy open.
* Fix mkdtemp()
Was returning the address of the internal buffer rather than the
user-provided buffer. Also fixed a typo in an error message.
* Don't call fgetgrent_r() with a null FILE *.
* A couple of other typo-type fixes.
|
|
None of them seem to have been genuine problems, but it's prettier now,
and some were questionable.
|
|
spotting these.) Check for failed calls to pseudo_prefix_path in
a couple of places, handle failed open of pid file, and make
pseudo_prefix_path robust in the case of a zero-length PSEUDO_PREFIX.
Also, don't try to overwrite the contents of an environment
variable anymore. (The amazing part? None of these have ever
caused a failure.)
|
|
|
Peter Seebach
Mark Hatle
Peter Seebach