%poky; ] > The devtool command-line tool provides a number of features that help you build, test, and package software. This command is available alongside the bitbake command. Additionally, the devtool command is a key part of the extensible SDK. This chapter provides a Quick Reference for the devtool command. For more information on how to apply the command when using the extensible SDK, see the "Using the Extensible SDK" chapter in the Yocto Project Application Development and the Extensible Software Development Kit (eSDK) manual.

The devtool command line is organized similarly to Git in that it has a number of sub-commands for each function. You can run devtool --help to see all the commands: $ devtool --help NOTE: Starting bitbake server... usage: devtool [--basepath BASEPATH] [--bbpath BBPATH] [-d] [-q] [--color COLOR] [-h] <subcommand> ... OpenEmbedded development tool options: --basepath BASEPATH Base directory of SDK / build directory --bbpath BBPATH Explicitly specify the BBPATH, rather than getting it from the metadata -d, --debug Enable debug output -q, --quiet Print only errors --color COLOR Colorize output (where COLOR is auto, always, never) -h, --help show this help message and exit subcommands: Beginning work on a recipe: add Add a new recipe modify Modify the source for an existing recipe upgrade Upgrade an existing recipe Getting information: status Show workspace status search Search available recipes latest-version Report the latest version of an existing recipe Working on a recipe in the workspace: build Build a recipe rename Rename a recipe file in the workspace edit-recipe Edit a recipe file find-recipe Find a recipe file configure-help Get help on configure script options update-recipe Apply changes from external source tree to recipe reset Remove a recipe from your workspace finish Finish working on a recipe in your workspace Testing changes on target: deploy-target Deploy recipe output files to live target machine undeploy-target Undeploy recipe output files in live target machine build-image Build image including workspace recipe packages Advanced: create-workspace Set up workspace in an alternative location export Export workspace into a tar archive import Import exported tar archive into workspace extract Extract the source for an existing recipe sync Synchronize the source tree for an existing recipe Use devtool <subcommand> --help to get help on a specific command As directed in the general help output, you can get more syntax on a specific command by providing the command name and using --help: $ devtool add --help NOTE: Starting bitbake server... usage: devtool add [-h] [--same-dir | --no-same-dir] [--fetch URI] [--fetch-dev] [--version VERSION] [--no-git] [--srcrev SRCREV | --autorev] [--srcbranch SRCBRANCH] [--binary] [--also-native] [--src-subdir SUBDIR] [--mirrors] [--provides PROVIDES] [recipename] [srctree] [fetchuri] Adds a new recipe to the workspace to build a specified source tree. Can optionally fetch a remote URI and unpack it to create the source tree. arguments: recipename Name for new recipe to add (just name - no version, path or extension). If not specified, will attempt to auto-detect it. srctree Path to external source tree. If not specified, a subdirectory of /home/scottrif/poky/build/workspace/sources will be used. fetchuri Fetch the specified URI and extract it to create the source tree options: -h, --help show this help message and exit --same-dir, -s Build in same directory as source --no-same-dir Force build in a separate build directory --fetch URI, -f URI Fetch the specified URI and extract it to create the source tree (deprecated - pass as positional argument instead) --fetch-dev For npm, also fetch devDependencies --version VERSION, -V VERSION Version to use within recipe (PV) --no-git, -g If fetching source, do not set up source tree as a git repository --srcrev SRCREV, -S SRCREV Source revision to fetch if fetching from an SCM such as git (default latest) --autorev, -a When fetching from a git repository, set SRCREV in the recipe to a floating revision instead of fixed --srcbranch SRCBRANCH, -B SRCBRANCH Branch in source repository if fetching from an SCM such as git (default master) --binary, -b Treat the source tree as something that should be installed verbatim (no compilation, same directory structure). Useful with binary packages e.g. RPMs. --also-native Also add native variant (i.e. support building recipe for the build host as well as the target machine) --src-subdir SUBDIR Specify subdirectory within source tree to use --mirrors Enable PREMIRRORS and MIRRORS for source tree fetching (disable by default). --provides PROVIDES, -p PROVIDES Specify an alias for the item provided by the recipe. E.g. virtual/libgl

devtool uses a "Workspace" layer in which to accomplish builds. This layer is not specific to any single devtool command but is rather a common working area used across the tool. The following figure shows the workspace structure: attic - A directory created if devtool believes it must preserve anything when you run "devtool reset". For example, if you run "devtool add", make changes to the recipe, and then run "devtool reset", devtool takes notice that the file has been changed and moves it into the attic should you still want the recipe. README - Provides information on what is in workspace layer and how to manage it. .devtool_md5 - A checksum file used by devtool. appends - A directory that contains *.bbappend files, which point to external source. conf - A configuration directory that contains the layer.conf file. recipes - A directory containing recipes. This directory contains a folder for each directory added whose name matches that of the added recipe. devtool places the recipe.bb file within that sub-directory. sources - A directory containing a working copy of the source files used when building the recipe. This is the default directory used as the location of the source tree when you do not provide a source tree path. This directory contains a folder for each set of source files matched to a corresponding recipe.

Use the devtool add command to add a new recipe to the workspace layer. The recipe you add should not exist - devtool creates it for you. The source files the recipe uses should exist in an external area. The following example creates and adds a new recipe named jackson to a workspace layer the tool creates. The source code built by the recipes resides in /home/user/sources/jackson: $ devtool add jackson /home/user/sources/jackson If you add a recipe and the workspace layer does not exist, the command creates the layer and populates it as described in "The Workspace Layer Structure" section. Running devtool add when the workspace layer exists causes the tool to add the recipe, append files, and source files into the existing workspace layer. The .bbappend file is created to point to the external source tree. If your recipe has runtime dependencies defined, you must be sure that these packages exist on the target hardware before attempting to run your application. If dependent packages (e.g. libraries) do not exist on the target, your application, when run, will fail to find those functions. For more information, see the "Deploying Your Software on the Target Machine" section. By default, devtool add uses the latest revision (i.e. master) when unpacking files from a remote URI. In some cases, you might want to specify a source revision by branch, tag, or commit hash. You can specify these options when using the devtool add command: To specify a source branch, use the --srcbranch option: $ devtool add --srcbranch &DISTRO_NAME_NO_CAP; jackson /home/user/sources/jackson In the previous example, you are checking out the &DISTRO_NAME_NO_CAP; branch. To specify a specific tag or commit hash, use the --srcrev option: $ devtool add --srcrev &DISTRO_REL_TAG; jackson /home/user/sources/jackson $ devtool add --srcrev some_commit_hash /home/user/sources/jackson The previous examples check out the &DISTRO_REL_TAG; tag and the commit associated with the some_commit_hash hash. If you prefer to use the latest revision every time the recipe is built, use the options --autorev or -a.

Use the devtool extract command to extract the source for an existing recipe. When you use this command, you must supply the root name of the recipe (i.e. no version, paths, or extensions), and you must supply the directory to which you want the source extracted. Additional command options let you control the name of a development branch into which you can checkout the source and whether or not to keep a temporary directory, which is useful for debugging.

Use the devtool sync command to synchronize a previously extracted source tree for an existing recipe. When you use this command, you must supply the root name of the recipe (i.e. no version, paths, or extensions), and you must supply the directory to which you want the source extracted. Additional command options let you control the name of a development branch into which you can checkout the source and whether or not to keep a temporary directory, which is useful for debugging.

Use the devtool modify command to begin modifying the source of an existing recipe. This command is very similar to the add command except that it does not physically create the recipe in the workspace layer because the recipe already exists in an another layer. The devtool modify command extracts the source for a recipe, sets it up as a Git repository if the source had not already been fetched from Git, checks out a branch for development, and applies any patches from the recipe as commits on top. You can use the following command to checkout the source files: $ devtool modify recipe Using the above command form, devtool uses the existing recipe's SRC_URI statement to locate the upstream source, extracts the source into the default sources location in the workspace. The default development branch used is "devtool".

Use the devtool edit-recipe command to run the default editor, which is identified using the EDITOR variable, on the specified recipe. When you use the devtool edit-recipe command, you must supply the root name of the recipe (i.e. no version, paths, or extensions). Also, the recipe file itself must reside in the workspace as a result of the devtool add or devtool upgrade commands. However, you can override that requirement by using the "-a" or "--any-recipe" option. Using either of these options allows you to edit any recipe regardless of its location.

Use the devtool update-recipe command to update your recipe with patches that reflect changes you make to the source files. For example, if you know you are going to work on some code, you could first use the devtool modify command to extract the code and set up the workspace. After which, you could modify, compile, and test the code. When you are satisfied with the results and you have committed your changes to the Git repository, you can then run the devtool update-recipe to create the patches and update the recipe: $ devtool update-recipe recipe If you run the devtool update-recipe without committing your changes, the command ignores the changes. Often, you might want to apply customizations made to your software in your own layer rather than apply them to the original recipe. If so, you can use the -a or --append option with the devtool update-recipe command. These options allow you to specify the layer into which to write an append file: $ devtool update-recipe recipe -a base-layer-directory The *.bbappend file is created at the appropriate path within the specified layer directory, which may or may not be in your bblayers.conf file. If an append file already exists, the command updates it appropriately.

As software matures, upstream recipes are upgraded to newer versions. As a developer, you need to keep your local recipes up-to-date with the upstream version releases. Several methods exist by which you can upgrade recipes. You can read about them in the "Upgrading Recipes" section of the Yocto Project Development Tasks Manual. This section overviews the devtool upgrade command. The devtool upgrade command upgrades an existing recipe to a more recent version of the recipe upstream. The command puts the upgraded recipe file along with any associated files into a "workspace" and, if necessary, extracts the source tree to a specified location. During the upgrade, patches associated with the recipe are rebased or added as needed. When you use the devtool upgrade command, you must supply the root name of the recipe (i.e. no version, paths, or extensions), and you must supply the directory to which you want the source extracted. Additional command options let you control things such as the version number to which you want to upgrade (i.e. the PV), the source revision to which you want to upgrade (i.e. the SRCREV), whether or not to apply patches, and so forth. You can read more on the devtool upgrade workflow in the "Use devtool upgrade to Create a Version of the Recipe that Supports a Newer Version of the Software" section in the Yocto Project Application Development and the Extensible Software Development Kit (eSDK) manual. You can also see an example of how to use devtool upgrade in the "Using devtool upgrade" section in the Yocto Project Development Tasks Manual.

Use the devtool reset command to remove a recipe and its configuration (e.g. the corresponding .bbappend file) from the workspace layer. Realize that this command deletes the recipe and the append file. The command does not physically move them for you. Consequently, you must be sure to physically relocate your updated recipe and the append file outside of the workspace layer before running the devtool reset command. If the devtool reset command detects that the recipe or the append files have been modified, the command preserves the modified files in a separate "attic" subdirectory under the workspace layer. Here is an example that resets the workspace directory that contains the mtr recipe: $ devtool reset mtr NOTE: Cleaning sysroot for recipe mtr... NOTE: Leaving source tree /home/scottrif/poky/build/workspace/sources/mtr as-is; if you no longer need it then please delete it manually $

Use the devtool build command to cause the OpenEmbedded build system to build your recipe. The devtool build command is equivalent to bitbake -c populate_sysroot. When you use the devtool build command, you must supply the root name of the recipe (i.e. no version, paths, or extensions). You can use either the "-s" or the "--disable-parallel-make" option to disable parallel makes during the build. Here is an example: $ devtool build recipe

Use the devtool build-image command to build an image, extending it to include packages from recipes in the workspace. Using this command is useful when you want an image that ready for immediate deployment onto a device for testing. For proper integration into a final image, you need to edit your custom image recipe appropriately. When you use the devtool build-image command, you must supply the name of the image. This command has no command line options: $ devtool build-image image

Use the devtool deploy-target command to deploy the recipe's build output to the live target machine: $ devtool deploy-target recipe target The target is the address of the target machine, which must be running an SSH server (i.e. user@hostname[:destdir]). This command deploys all files installed during the do_install task. Furthermore, you do not need to have package management enabled within the target machine. If you do, the package manager is bypassed. The deploy-target functionality is for development only. You should never use it to update an image that will be used in production. Some conditions exist that could prevent a deployed application from behaving as expected. When both of the following conditions exist, your application has the potential to not behave correctly when run on the target: You are deploying a new application to the target and the recipe you used to build the application had correctly defined runtime dependencies. The target does not physically have the packages on which the application depends installed. If both of these conditions exist, your application will not behave as expected. The reason for this misbehavior is because the devtool deploy-target command does not deploy the packages (e.g. libraries) on which your new application depends. The assumption is that the packages are already on the target. Consequently, when a runtime call is made in the application for a dependent function (e.g. a library call), the function cannot be found. To be sure you have all the dependencies local to the target, you need to be sure that the packages are pre-deployed (installed) on the target before attempting to run your application.

Use the devtool undeploy-target command to remove deployed build output from the target machine. For the devtool undeploy-target command to work, you must have previously used the devtool deploy-target command. $ devtool undeploy-target recipe target The target is the address of the target machine, which must be running an SSH server (i.e. user@hostname).

Use the devtool create-workspace command to create a new workspace layer in your Build Directory. When you create a new workspace layer, it is populated with the README file and the conf directory only. The following example creates a new workspace layer in your current working and by default names the workspace layer "workspace": $ devtool create-workspace You can create a workspace layer anywhere by supplying a pathname with the command. The following command creates a new workspace layer named "new-workspace": $ devtool create-workspace /home/scottrif/new-workspace

Use the devtool status command to list the recipes currently in your workspace. Information includes the paths to their respective external source trees. The devtool status command has no command-line options: $ devtool status Following is sample output after using devtool add to create and add the mtr_0.86.bb recipe to the workspace directory: $ devtool status mtr: /home/scottrif/poky/build/workspace/sources/mtr (/home/scottrif/poky/build/workspace/recipes/mtr/mtr_0.86.bb) $

Use the devtool search command to search for available target recipes. The command matches the recipe name, package name, description, and installed files. The command displays the recipe name as a result of a match. When you use the devtool search command, you must supply a keyword. The command uses the keyword when searching for a match.