diff options
Diffstat (limited to 'README.hardware')
| -rw-r--r-- | README.hardware | 12 |
1 files changed, 6 insertions, 6 deletions
diff --git a/README.hardware b/README.hardware index e22fc0899e..368675964a 100644 --- a/README.hardware +++ b/README.hardware @@ -59,7 +59,7 @@ Consumer Devices The following consumer devices are supported by the meta-yocto-bsp layer: - * Intel Atom based PCs and devices (atom-pc) + * Intel x86 based PCs and devices (genericx86) For more information see the device's section below. The appropriate MACHINE variable value corresponding to the device is given in brackets. @@ -70,10 +70,10 @@ variable value corresponding to the device is given in brackets. =============================== -Intel Atom based PCs and devices (atom-pc) +Intel x86 based PCs and devices (genericx86) ========================================== -The atom-pc MACHINE is tested on the following platforms: +The genericx86 MACHINE is tested on the following platforms: o Asus EeePC 901 o Acer Aspire One @@ -93,7 +93,7 @@ device as the following commands are run as root and are not reversable. USB Device: 1. Build a live image. This image type consists of a simple filesystem without a partition table, which is suitable for USB keys, and with the - default setup for the atom-pc machine, this image type is built + default setup for the genericx86 machine, this image type is built automatically for any image you build. For example: $ bitbake core-image-minimal @@ -101,7 +101,7 @@ USB Device: 2. Use the "dd" utility to write the image to the raw block device. For example: - # dd if=core-image-minimal-atom-pc.hddimg of=/dev/sdb + # dd if=core-image-minimal-genericx86.hddimg of=/dev/sdb If the device fails to boot with "Boot error" displayed, or apparently stops just after the SYSLINUX version banner, it is likely the BIOS cannot @@ -142,7 +142,7 @@ USB Device: # mkdir /tmp/image # mkdir /tmp/usbkey - # mount -o loop core-image-minimal-atom-pc.hddimg /tmp/image + # mount -o loop core-image-minimal-genericx86.hddimg /tmp/image # mount /dev/sdb4 /tmp/usbkey # cp -rf /tmp/image/* /tmp/usbkey |