#@TYPE: Machine #@NAME: zcu106-zynqmp #@DESCRIPTION: Machine configuration for the ZCU106 evaluation board. #### Preamble MACHINEOVERRIDES =. "${@['', 'zcu106-zynqmp:']['zcu106-zynqmp' !='${MACHINE}']}" #### Regular settings follow # Variables that changes based on hw design or board specific requirement must be # defined before calling the required inclusion file else pre-expansion value # defined in zynqmp-generic.conf will be set. # Yocto device-tree variables YAML_CONSOLE_DEVICE_CONFIG:pn-device-tree ?= "psu_uart_0" YAML_MAIN_MEMORY_CONFIG:pn-device-tree ?= "PSU_DDR_0" YAML_DT_BOARD_FLAGS ?= "{BOARD zcu106-reva}" # Yocto arm-trusted-firmware(TF-A) variables ATF_CONSOLE ?= "cadence" TFA_BL33_LOAD ?= "0x8000000" # Yocto PMUFW variables YAML_SERIAL_CONSOLE_STDIN:pn-pmu-firmware ?= "psu_uart_0" YAML_SERIAL_CONSOLE_STDOUT:pn-pmu-firmware ?= "psu_uart_0" # Yocto FSBL variables YAML_SERIAL_CONSOLE_STDIN:pn-fsbl-firmware ?= "psu_uart_0" YAML_SERIAL_CONSOLE_STDOUT:pn-fsbl-firmware ?= "psu_uart_0" # Yocto KERNEL Variables UBOOT_ENTRYPOINT ?= "0x200000" UBOOT_LOADADDRESS ?= "0x200000" # zcu106-zynqmp Serial Console SERIAL_CONSOLES ?= "115200;ttyPS0" YAML_SERIAL_CONSOLE_BAUDRATE ?= "115200" # Required generic machine inclusion # ZCU106 board uses ZynqMP EV device hence use soc variant based generic machine # inclusion require conf/machine/zynqmp-ev-generic.conf # This eval board machine conf file uses zcu106-zynqmp xsa as reference input. # User can override with zcu106 custom xsa using HDF_BASE and HDF_PATH variables # from local.conf. HDF_MACHINE = "zcu106-zynqmp" # KERNEL_DEVICETREE is disabled as we use board device tree from DTG to match # the xsa. User can enable explicitly if required from local.conf. # KERNEL_DEVICETREE = "xilinx/zynqmp-zcu106-revA.dtb" # Yocto IMAGE_FEATURES Variable MACHINE_HWCODECS = "libomxil-xlnx" IMAGE_FEATURES += "hwcodecs" #### No additional settings should be after the Postamble #### Postamble PACKAGE_EXTRA_ARCHS:append = "${@['', ' zcu106_zynqmp']['zcu106-zynqmp' != '${MACHINE}']}"