Age | Commit message (Collapse) | Author |
|
Testimage has specific requirements about how the filesystem, qemu and other
components are configured. Create a special QEMU bsp for the ZynqMP and
it's variants. Note, eg/ev can not emulate the Mali, so may fail mesa and
OpenGL/GLES testing.
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
|
|
These BSPs are no longer public, and have been removed in 2023.2.
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
|
|
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
|
|
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
|
|
In arm-trusted-firmware recipe, ATF_CONSOLE_DEFAULT variable has
override and setting this variable value from local.conf and
machine.conf will not be effective during variable pre-expansion values.
Hence use ATF_CONSOLE instead of ATF_CONSOLE_DEFAULT in machine conf
files.
Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com>
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
|
|
In arm-trusted-firmware recipe, ATF_CONSOLE_DEFAULT variable has
override and setting this variable value from local.conf and
machine.conf will not be effective during variable pre-expansion values.
Hence use ATF_CONSOLE instead of ATF_CONSOLE_DEFAULT in machine conf
files.
Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com>
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
|
|
Since zcu1275 and zcu1285 design xsa has deprecated, hence
deprecate zcu1275 and zcu1285 machine conf files.
Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com>
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
|
|
1. Add missing space to append operation for machine files generated
by gen-machineconf tool.
2. Update all machine conf file using gen-machineconf tool by parsing
latest xsa.
a. Reorder the variables to match the gen-machineconf tool output.
b. Add any missing or new variables.
3. Remove machine overrides for XSCTH_PROC variable.
Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com>
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
|
|
Using BOARD variable are deprecated, hence remove it. Machine conf
files using BOARD overrides now will be replaced with machineoverrides.
Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com>
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
|
|
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
|
|
Resolved conflicts
Preserved 2022* versions
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
|
|
QEMU PLM error code are observed as shown below.
[21148.520]XPlmi_MaskPoll: Addr: 0xF6D1010C, Mask: 0x1, ExpVal: 0x1, Timeout: 1000000 ...ERROR
[21149.542]CMD: 0x00040101 execute failed, Processed Cdo Length 0x468
[21150.294]CMD Payload START, Len:0x00000004
0x00000000F200048C: 0xF6D1010C 0x00000001 0x00000001 0x00001000
0x00000000F2000498:
[21151.698]CMD Payload END
[21152.876]PLM Error Status: 0x21010001
[21153.347]============Register Dump============
[21153.885]PMC_TAP_IDCODE: 0x00000000
[21154.325]EFUSE_CACHE_IP_DISABLE_0(EXTENDED IDCODE): 0x00000000
[21155.023]PMC_TAP_VERSION: 0x03000000
[21155.450]CRP_BOOT_MODE_USER: 0x00000005
[21155.902]CRP_BOOT_MODE_POR: 0x00000005
[21156.354]CRP_RESET_REASON: 0x00000202
[21156.815]PMC_GLOBAL_PMC_MULTI_BOOT: 0xF0000000
[21157.351]PMC_GLOBAL_PWR_STATUS: 0x00000000
[21157.849]PMC_GLOBAL_PMC_GSW_ERR: 0x00000000
[21158.358]PMC_GLOBAL_PLM_ERR: 0x00000000
[21158.842]PMC_GLOBAL_PMC_ERR1_STATUS: 0x00000000
[21159.409]PMC_GLOBAL_PMC_ERR2_STATUS: 0x00000000
[21159.976]PMC_GLOBAL_GICP0_IRQ_STATUS: 0x20000000
[21160.542]PMC_GLOBAL_GICP1_IRQ_STATUS: 0x00000000
[21161.115]PMC_GLOBAL_GICP2_IRQ_STATUS: 0x00000000
[21161.695]PMC_GLOBAL_GICP3_IRQ_STATUS: 0x00000000
[21162.271]PMC_GLOBAL_GICP4_IRQ_STATUS: 0x00000000
[21162.852]PMC_GLOBAL_GICP_PMC_IRQ_STATUS: 0x00000000
[21163.439]============Register Dump============
This is due to incorrect QEMU_HW_DTB_PS is set for VEK280 machine conf file.
1. Fix QEMU PLM boot issue by setting the right QEMU_HW_DTB_PS to
board-versal-ps-vek280.dtb.
2. Update YAML_DT_BOARD_FLAGS to use versal-vek280-revb.
3. Set QB_MEM to 12G as VEK280 board has 12GB memory.
Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com>
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
|
|
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
|
|
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
|
|
1. Add new versal eval board machine conf file using gen-machineconf
tool by parsing respective xsa.
2. Use soc variant based generic machine inclusion.
Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com>
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
|
|
1. Update below microblazeel eval board machine conf file using
gen-machineconf tool by parsing respective xsa.
2. Move variables which changes based on xsa before required
inclusion file to handle pre-expansion values.
Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com>
3. Remove kc705-bitstream, use standard bitstream-extraction now
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
|
|
1. Update below versal eval board machine conf file using
gen-machineconf tool by parsing respective xsa.
- vck190-versal
- vck5000-versal
- vmk180-versal
2. Move variables which changes based on xsa before required
inclusion file to handle pre-expansion values.
3. Use use soc variant based generic machine inclusion.
Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com>
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
|
|
1. Update below zynqmp eval board machine conf file using
gen-machineconf tool by parsing respective xsa.
- zcu102-zynqmp
- zcu104-zynqmp
- zcu106-zynqmp
- zcu111-zynqmp
- zcu1275-zynqmp
- zcu1285-zynqmp
- zcu216-zynqmp
2. Move variables which changes based on xsa before required
inclusion file to handle pre-expansion values.
3. Disable U-boot SPL boot and kernel device tree by default.
User has to set explicitly to use it.
4. Use use soc variant based generic machine inclusion
Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com>
Remove zcu208-zynqmp, no public XSA.
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
|
|
1. Update zc702 and zc706 machine conf file using gen-machineconf
tool by parsing zc702 and zc706 xsa.
2. Move variables which changes based on xsa before required
inclusion file to handle pre-expansion values.
3. Remove BOARD MACHINEOVERRIDES in conf file.
Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com>
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
|
|
In meta-xilinx-core u-boot-zynq-scr and u-boot-zynq-uenv recipes are
renamed to u-boot-xlnx-scr and u-boot-xlnx-uenv. Hence change these
in all the configuration files.
Also move common EXTRA_IMAGEDEPENDS to zynq-generic.conf files.
Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com>
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
|
|
Remove vck-sc-zynqmp machine conf file from meta-xilinx-bsp layer.
Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com>
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
|
|
VHK158 has 32GB memory only but default versal-generic has QB_MEM set to 8G,
Since versal-vhk158-reva.dts has 32GB set, we need set same in QB_MEM.
Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com>
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
|
|
1. Add new zcu670 eval board machine conf file using gen-machineconf
tool by parsing respective xsa.
2. Use use soc variant based generic machine inclusion.
Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com>
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
|
|
1. Add new versal eval board machine conf file using gen-machineconf
tool by parsing respective xsa.
- vhk158-versal
- vpk120-versal
- vpk180-versal
2. Use use soc variant based generic machine inclusion.
Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com>
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
|
|
1. Update below microblazeel eval board machine conf file using
gen-machineconf tool by parsing respective xsa.
- ac701-microblazeel
- kc705-microblazeel
- kcu105-microblazeel
- vcu118-microblazeel
2. Move variables which changes based on xsa before required
inclusion file to handle pre-expansion values.
Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com>
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
|
|
1. Update below versal eval board machine conf file using
gen-machineconf tool by parsing respective xsa.
- vck190-versal
- vck5000-versal
- vmk180-versal
2. Move variables which changes based on xsa before required
inclusion file to handle pre-expansion values.
3. Use use soc variant based generic machine inclusion.
Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com>
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
|
|
1. Update below zynqmp eval board machine conf file using
gen-machineconf tool by parsing respective xsa.
- zcu102-zynqmp
- zcu104-zynqmp
- zcu106-zynqmp
- zcu111-zynqmp
- zcu1275-zynqmp
- zcu1285-zynqmp
- zcu208-zynqmp
- zcu216-zynqmp
2. Move variables which changes based on xsa before required
inclusion file to handle pre-expansion values.
3. Disable U-boot SPL boot and kernel device tree by default.
User has to set explicitly to use it.
4. Use use soc variant based generic machine inclusion
Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com>
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
|
|
1. Update zc702 and zc706 machine conf file using gen-machineconf
tool by parsing zc702 and zc706 xsa.
2. Move variables which changes based on xsa before required
inclusion file to handle pre-expansion values.
3. Remove BOARD MACHINEOVERRIDES in conf file.
Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com>
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
|
|
1. Move variables which changes based on xsa before required
inclusion file to handle pre-expansion values.
2. Remove duplicate entries of variables as it is already set in
versal-generic.conf file.
Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com>
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
|
|
Add new machine conf file for VEK280 evaluation board. This machine
conf file is generated using gen-machine-conf tool.
Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com>
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
|
|
In meta-xilinx-core u-boot-zynq-scr and u-boot-zynq-uenv recipes are
renamed to u-boot-xlnx-scr and u-boot-xlnx-uenv. Hence change these
in all the configuration files.
Also move common EXTRA_IMAGEDEPENDS to zynq-generic.conf files.
Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com>
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
|
|
Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com>
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
|
|
Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com>
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
|
|
Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com>
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
|
|
Remove vck-sc-zynqmp machine conf file from meta-xilinx-bsp layer.
Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@amd.com>
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
|
|
1. Add new metal-xilinx-vendor layer which supports vendor specific
machine configuration files, device-tree, kernel, platform-init etc.
2. Moved below vendor machine conf files, dt and related configs from
meta-xilinx-bsp and meta-xilinx-contrib to meta-xilinx-vendor layer.
- microzed-zynq7.conf
- minized-zynq7.conf
- picozed-zynq7.conf
- zedboard-zynq7.conf
- zybo-zynq7.conf
- zybo-linux-bd-zynq7.conf
- ultra96-zynqmp.conf
3. Obsolete qemu-zynq7, s3adsp1800-qemu-microblazeeb, v350-versal and
vc-p-a2197-00-versal from meta-xilinx-bsp layer. Users should use
zynq-generic.conf for zynq7000 qemu boot should be functionally
equivalent to qemu-zynq7.
4. Add new MAINTAINERS.md file and move maintainers, Mailing list and
Patches content from meta-xilinx-* README.md to MAINTAINERS.md file.
5. Updated README.md file for supported board machines files in
meta-xilinx-bsp, meta-xilinx-contrib and meta-xilinx-vendor layers.
6. Disabled old drm kernel patches for zybo-linux-bd-zynq mahcine in
meta-xilinx-contrib layer as these patches doesn't apply on 5.x
kernel, if we don't hear from patch submitter we will remove these
patches from meta-xilinx-contrib layer.
7. Removed drm kernel cache metadate for zybo-linux-bd-zynq7 machine
as these configs are already available in xilinx_zynq_defconfig.
8. Fixed build issue for u-boot by changing
PREFERRED_PROVIDER_virtual/bootloader from u-boot to u-boot-xlnx.
9. Add meta-xilinx-vendor to bblayers.conf.sample
Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@xilinx.com>
Signed-off-by: Mark Hatle <mhatle@xilinx.com>
|
|
populate_sdk_ext step"
This reverts commit 51e48cc7acd766a6d84dbcc65d7b64de6f5d707e.
linux-firmware, linux-firmware-ti-bt, and petalinux-image-minimal
now build successfully.
Signed-off-by: Vishal Patel <vishal.patel@xilinx.com>
Signed-off-by: Mark Hatle <mark.hatle@xilinx.com>
|
|
Signed-off-by: Mark Hatle <mark.hatle@xilinx.com>
|
|
Add the override expected by device-tree and other recipes to each machine.
Signed-off-by: Mark Hatle <mark.hatle@xilinx.com>
|
|
Signed-off-by: Mark Hatle <mark.hatle@xilinx.com>
|
|
Use the MACHINEOVERRIDES to add the BOARD name so that overrides elsewhere
will work as expected. Eventually the overrides will need to be adjusted.
Signed-off-by: Mark Hatle <mark.hatle@xilinx.com>
|
|
Signed-off-by: Mark Hatle <mark.hatle@xilinx.com>
|
|
All machines are now capable of heterogenous configuration by selecting
the correct DEFAULTTUNE and other values.
Signed-off-by: Mark Hatle <mark.hatle@xilinx.com>
|
|
PACKAGE_ARCH should not be MACHINE_ARCH, unless a specific override is
being used for compatibility.
Signed-off-by: Mark Hatle <mark.hatle@xilinx.com>
|
|
If the BOARD and/or BOARD_VARIANT is set, continue to allow this to
work, however warn the user it is deprecated.
Signed-off-by: Mark Hatle <mark.hatle@xilinx.com>
|
|
Signed-off-by: Mark Hatle <mark.hatle@xilinx.com>
|
|
Create a new meta-xilinx-core, move core functionality to the core, keeping
board specific files in the bsp layer.
zynqmp-generic changed from require <board> to include, so if meta-xilinx-bsp
is not available it will not fail.
Signed-off-by: Mark Hatle <mark.hatle@xilinx.com>
|
|
Signed-off-by: Mark Hatle <mark.hatle@xilinx.com>
|
|
Signed-off-by: Mark Hatle <mark.hatle@xilinx.com>
|
|
Signed-off-by: Mark Hatle <mark.hatle@xilinx.com>
|