diff options
Diffstat (limited to 'meta-xilinx-bsp')
294 files changed, 1462 insertions, 39659 deletions
diff --git a/meta-xilinx-bsp/README.booting.md b/meta-xilinx-bsp/README.booting.md deleted file mode 100644 index dc48f6b2..00000000 --- a/meta-xilinx-bsp/README.booting.md +++ /dev/null @@ -1,266 +0,0 @@ -Booting meta-xilinx boards -========================== - -Contents --------- - -* [Loading via JTAG](#loading-via-jtag) - * [XSDB](#xsdb) - * [Load Bitstream](#load-bitstream) - * [Load U-Boot (MicroBlaze)](#load-u-boot-microblaze) - * [Load U-Boot (Zynq)](#load-u-boot-zynq) - * [U-Boot Console](#u-boot-console) - * [Kernel, Root Filesystem and Device Tree](#kernel-root-filesystem-and-device-tree) - * [Booting via U-Boot](#booting-via-u-boot) -* [Loading via SD](#loading-via-sd) - * [Preparing SD/MMC](#preparing-sdmmc) - * [Installing U-Boot](#installing-u-boot) - * [Installing Kernel and Device Tree](#installing-kernel-and-device-tree) - * [Installing Root Filesystem](#installing-root-filesystem) - * [U-Boot Configuration File](#u-boot-configuration-file) - * [Booting](#booting) -* [Loading via TFTP](#loading-via-tftp) - * [Kernel, Root Filesystem and Device Tree](#kernel-root-filesystem-and-device-tree-1) - * [Booting via U-Boot](#booting-via-u-boot-1) - - -Loading via JTAG ----------------- -This boot flow requires the use of the Xilinx tools, specifically XSDB and the -associated JTAG device drivers. This also requires access to the JTAG interface -on the board, a number of Xilinx and third-party boards come with on-board JTAG -modules. - -### XSDB -Start `xsdb` and connect. Ensure that the target chip is visible. - - $ xsdb - xsdb% connect - xsdb% targets - -### Load Bitstream -**(Note: This step is only required for platforms which have a bitstream e.g. -MicroBlaze.)** - -Download the bitstream for the system using XSDB with the `fpga -f` command. If -a bitstream is available from meta-xilinx is will be located in the -`deploy/images/<machine-name>/` directory. - - xsdb% fpga -f download.bit - -### Load U-Boot (MicroBlaze) -Download `u-boot.elf` to the target CPU via the use of XSDB. - - xsdb% targets -set -filter {name =~ "MicroBlaze*"} - xsdb% rst - xsdb% dow u-boot.elf - xsdb% con - -### Load U-Boot (Zynq) -Ensure the board is configured to boot from JTAG. The Zynq platform requires the -loading of SPL first, this can be done by loading the `u-boot-spl.bin` and -executing it at location `0x0`. `u-boot-spl.bin` is not output to the deploy -directory by default, it can be obtained from the work directory for U-Boot -(`git/spl/u-boot-spl.bin`) or can be extracted from `boot.bin` using -`dd if=boot.bin of=u-boot-spl.bin bs=1 skip=2240`. - - xsdb% targets -set -filter {name =~ "ARM*#0"} - xsdb% dow -data u-boot-spl.bin 0x0 - xsdb% rwr pc 0x0 - xsdb% con - -On the UART console the following should appear, indicating SPL was loaded. - - U-Boot SPL 2016.01 - Trying to boot from unknown boot device - SPL: Unsupported Boot Device! - SPL: failed to boot from all boot devices - ### ERROR ### Please RESET the board ### - -Once SPL has loaded U-Boot can now be loaded into memory and executed. Download -`u-boot.elf` to the target. - - xsdb% stop - xsdb% dow u-boot.elf - xsdb% con - -### U-Boot Console -U-Boot will load and the console will be available on the UART interface. - - ... - Hit any key to stop autoboot: 0 - U-Boot> - -### Kernel, Root Filesystem and Device Tree -Whilst it is possible to load the images via JTAG this connection is slow and -this process can take a long time to execute (more than 10 minutes). If your -system has ethernet it is recommended that you use TFTP to load these images -using U-Boot. - -Once U-Boot has been loaded, pause the execution using XSDB and use the `dow` -command to load the images into the targets memory. Once the images are loaded -continue the execution and return to the U-Boot console. - -MicroBlaze (kc705-microblazeel): - - xsdb% stop - xsdb% dow -data linux.bin.ub 0x85000000 - xsdb% dow -data core-image-minimal-kc705-microblazeel.cpio.gz.u-boot 0x86000000 - xsdb% dow -data kc705-microblazeel.dtb 0x84000000 - xsdb% con - -Zynq: - - xsdb% stop - xsdb% dow -data uImage 0x2000000 - xsdb% dow -data core-image-minimal-<machine name>.cpio.gz.u-boot 0x3000000 - xsdb% dow -data <machine name>.dtb 0x2A00000 - xsdb% con - -### Booting via U-Boot -At the U-Boot console use the `bootm` command to execute the kernel. - -MicroBlaze (kc705-microblazeel): - - U-Boot> bootm 0x85000000 0x86000000 0x84000000 - -Zynq: - - U-Boot> bootm 0x2000000 0x3000000 0x2A00000 - - -Loading via SD ---------------------- -**(Note: This section only applies to Zynq and ZynqMP.)** - -### Preparing SD/MMC -Setup the card with the first partition formatted as FAT16. If you intend to -boot with the root filesystem located on the SD card, also create a second -partition formatted as EXT4. - -It is recommended that the first partition be at least 64MB in size, however -this value will depend on whether using a ramdisk for the root filesystem and -how large the ramdisk is. - -This section describes how to manually prepare and populate an SD card image. -There are automation tools in OpenEmbedded that can generate disk images already -formatted and prepared such that they can be written directly to a disk. Refer -to the Yocto Project Development Manual for more details: - http://www.yoctoproject.org/docs/current/dev-manual/dev-manual.html#creating-partitioned-images - -### Installing U-Boot (Zynq) -Add the following files to the first partition: - -* `boot.bin` -* `u-boot.img` - -### Installing U-Boot (ZynqMP) -Add the following files to the first partition: - -* `boot.bin` -* `u-boot.bin` - -### Installing Kernel and Device Tree (Zynq) -Add the following files to the first partition: - -* `uImage` -* `<machine name>.dtb` - -### Installing Kernel and Device Tree (ZynqMP) -Add the following files to the first partition: - -* `Image` -* `<machine name>.dtb` - -### Install ARM Trusted Firmware (ZynqMP) -Add the following file to the first partition: - - * `atf-uboot.ub` - -### Install U-boot environment file (ZynqMP) -Add the following file to the first partition: - - * `uEnv.txt` - -### Installing Root Filesystem -If using a ramdisk also add the `.cpio.gz.u-boot` type of root filesystem image -to the first partition. - -* `core-image-minimal-<machine name>.cpio.gz.u-boot` - -If using the SD card as the root filesystem, populate the second partition with -the content of the root filesystem. To install the root filesystem extract the -corresponding tarball into the root of the second partition (the following -command assumes that the second partition is mounted at /media/root). - - tar x -C /media/root -f core-image-minimal-<machine name>.tar.gz - -### U-Boot Configuration File -Also create the file `uEnv.txt` on the first partition of the SD card partition, -with the following contents. Replacing the names of files where appropriate. - - kernel_image=uImage - devicetree_image=<machine name>.dtb - -If using a ramdisk root filesystem setup the `ramdisk_image` variable. - - ramdisk_image=core-image-minimal-<machine name>.cpio.gz.u-boot - -If using the SD card as the root filesystem setup the kernel boot args, and -`uenvcmd` variable. - - bootargs=root=/dev/mmcblk0p2 rw rootwait - uenvcmd=fatload mmc 0 0x3000000 ${kernel_image} && fatload mmc 0 0x2A00000 ${devicetree_image} && bootm 0x3000000 - 0x2A00000 - -### Booting -Insert the SD card and connect UART to a terminal program and power on the -board. (For boards that have configurable boot jumper/switches ensure the board -is configured for SD). - -Initially U-Boot SPL will load, which will in turn load U-Boot. U-Boot will use -the `uEnv.txt` to automatically load and execute the kernel. - - -Loading via TFTP ----------------- -**(Note: This boot flow requires ethernet on the baord and a TFTP server)** - -Boot your system into U-Boot, using one of boot methods (e.g. JTAG, SD, QSPI). - -### Kernel, Root Filesystem and Device Tree -Place the following images into the root of the TFTP server directory: - -* `core-image-minimal-<machine name>.cpio.gz.u-boot` -* `uImage` (Zynq) or `linux.bin.ub` (MicroBlaze) -* `<machine name>.dtb` - -### Booting via U-Boot -The serial console of the target board will display the U-Boot console. -Configure the `ipaddr` and `serverip` of the U-Boot environment. - - U-Boot> set serverip <server ip> - U-Boot> set ipaddr <board ip> - -Using the U-Boot console; load the Kernel, root filesystem and the DTB into -memory. And then boot Linux using the `bootm` command. (Note the load addresses -will be dependant on machine used) - -MicroBlaze (kc705-microblazeel): - - U-Boot> tftpboot 0x85000000 linux.bin.ub - U-Boot> tftpboot 0x86000000 core-image-minimal-kc705-microblazeel.cpio.gz.u-boot - U-Boot> tftpboot 0x84000000 kc705-microblazeel.dtb - U-Boot> bootm 0x85000000 0x86000000 0x84000000 - -Zynq: - - U-Boot> tftpboot 0x2000000 uImage - U-Boot> tftpboot 0x3000000 core-image-minimal-<machine name>.cpio.gz.u-boot - U-Boot> tftpboot 0x2A00000 <machine name>.dtb - U-Boot> bootm 0x2000000 0x3000000 0x2A00000 - -U-Boot will prepare the Kernel for boot and then it will being to execute. - - ... - Starting kernel... - diff --git a/meta-xilinx-bsp/README.building.md b/meta-xilinx-bsp/README.building.md deleted file mode 100644 index 230037c1..00000000 --- a/meta-xilinx-bsp/README.building.md +++ /dev/null @@ -1,100 +0,0 @@ -Build Instructions -================== - -The following instructions require OE-Core meta and BitBake. Poky provides these -components, however they can be acquired separately. - -Initialize a build using the `oe-init-build-env` script. Once initialized -configure `bblayers.conf` by adding the `meta-xilinx-bsp` and -`meta-xilinx-contrib` layer. e.g.: - - BBLAYERS ?= " \ - <path to layer>/oe-core/meta \ - <path to layer>/meta-xilinx-bsp \ - <path to layer>/meta-xilinx-standalone \ - <path to layer>/meta-xilinx-contrib \ - " - -meta-xilinx-standalone layer provides recipes which enable building baremetal -toolchain for PMU firmware. This layer is required for ZU+ devices which -depends on PMU firmware - -meta-xilinx-contrib is a contribution layer and is optional. - -To build a specific target BSP configure the associated machine in `local.conf`: - - MACHINE ?= "zc702-zynq7" - -Build the target file system image using `bitbake`: - - $ bitbake core-image-minimal - -Once complete the images for the target machine will be available in the output -directory `tmp/deploy/images/<machine name>/`. - -Using SPL flow to build ZU+ ------------------------------- - -The pmufw needs a "configuration object" to know what it should do, and it -expects to receive it at runtime. - -With the U-Boot SPL workflow there's no FSBL, and passing a cfg obj to pmufw is -just not implemented in U-Boot - -To work around this problem a small patch has been developed so that -pm_cfg_obj.c is linked into pmufw and loaded directly, without waiting for it -from the outside. Find the original patch on the meta-topic layer [1] and the -patch updated for pmufw 2018.x here [2]. - -[1] -https://github.com/topic-embedded-products/meta-topic/blob/master/recipes-bsp/pmu-firmware/pmu-firmware_2017.%25.bbappend - -[2] -https://github.com/lucaceresoli/zynqmp-pmufw-builder/blob/master/0001-Load-XPm_ConfigObject-at-boot.patch - - -Using multiconfig to build ZU+ ------------------------------- - -In your local.conf multiconfig should be enabled by: - -`BBMULTICONFIG ?= "pmu"` - -Add a directory conf/multiconfig in the build directory and create pmu.conf inside it. - -Add the following in pmu.conf: - - MACHINE="zynqmp-pmu" - DISTRO="xilinx-standalone" - TMPDIR="${TOPDIR}/pmutmp" - -Add the following in your local.conf - - MACHINE="zcu102-zynqmp" - DISTRO="poky" - -A multiconfig dependency has to be added in the image recipe or local.conf. - -For example in core-image-minimal you would need: - - do_image[mcdepends] = "multiconfig::pmu:pmu-firmware:do_deploy" - -This creates a multiconfig dependency between the task do_image from the default multiconfig '' (which has no name) -to the task do_deploy() from the package pmu-firmware from the pmu multiconfig which was just created above. - - $ bitbake core-image-minimal - -This will build both core-image-minimal and pmu-firmware. - - -More information about multiconfig: -https://www.yoctoproject.org/docs/current/mega-manual/mega-manual.html#dev-building-images-for-multiple-targets-using-multiple-configurations - - -Additional Information ----------------------- - -For more complete details on setting up and using Yocto/OE refer to the Yocto -Project Quick Start guide available at: - http://www.yoctoproject.org/docs/current/yocto-project-qs/yocto-project-qs.html - diff --git a/meta-xilinx-bsp/README.md b/meta-xilinx-bsp/README.md index 13ef6b61..2d869913 100644 --- a/meta-xilinx-bsp/README.md +++ b/meta-xilinx-bsp/README.md @@ -1,87 +1,66 @@ -meta-xilinx -=========== - -This layer provides support for MicroBlaze, Zynq and ZynqMP. - -Additional documentation: - -* [Building](README.building.md) -* [Booting](README.booting.md) - -Supported Boards/Machines -========================= - -Boards/Machines supported by this layer: - -* MicroBlaze: - * [Xilinx ML605 (QEMU)](conf/machine/ml605-qemu-microblazeel.conf) - `ml605-qemu-microblazeel` (QEMU support) - * [Xilinx S3A DSP 1800 (QEMU)](conf/machine/s3adsp1800-qemu-microblazeeb.conf) - `s3adsp1800-qemu-microblazeeb` (QEMU support) - * [Xilinx KC705](conf/machine/kc705-microblazeel.conf) - `kc705-microblazeel` -* Zynq: - * [Zynq (QEMU)](conf/machine/qemu-zynq7.conf) - `qemu-zynq7` (QEMU Support) - * [Xilinx ZC702](conf/machine/zc702-zynq7.conf) - `zc702-zynq7` (with QEMU support) - * [Xilinx ZC706](conf/machine/zc706-zynq7.conf) - `zc706-zynq7` (with QEMU support) - * [Avnet MicroZed](conf/machine/microzed-zynq7.conf) - `microzed-zynq7` - * [Avnet PicoZed](conf/machine/picozed-zynq7.conf) - `picozed-zynq7` - * [Avnet/Digilent ZedBoard](conf/machine/zedboard-zynq7.conf) - `zedboard-zynq7` - * [Digilent Zybo](conf/machine/zybo-zynq7.conf) - `zybo-zynq7` - * [Digilent Zybo Linux BD](conf/machine/zybo-linux-bd-zynq7.conf) - `zybo-linux-bd-zynq7` -* ZynqMP: - * [Xilinx ZCU102](conf/machine/zcu102-zynqmp.conf) - `zcu102-zynqmp` (QEMU support) - * [Xilinx ZCU106](conf/machine/zcu106-zynqmp.conf) - `zcu106-zynqmp` - * [Xilinx ZCU104](conf/machine/zcu104-zynqmp.conf) - `zcu104-zynqmp` - -Additional information on Xilinx architectures can be found at: - http://www.xilinx.com/support/index.htm - -For Zybo Linux BD reference design, please see meta-xilinx-contrib layer - -Maintainers, Mailing list, Patches -================================== - -Please send any patches, pull requests, comments or questions for this layer to -the [meta-xilinx mailing list](https://lists.yoctoproject.org/listinfo/meta-xilinx): - - meta-xilinx@lists.yoctoproject.org - -Maintainers: - - Manjukumar Harthikote Matha <manjukumar.harthikote-matha@xilinx.com> - -Dependencies -============ +# meta-xilinx-bsp + +This layer enables AMD Xilinx MicroBlaze, Zynq, ZynqMP and Versal device +evaluation boards and provides related metadata. + +## Additional documentation + +* [Building Image Instructions](../README.building.md) +* [Booting Image Instructions](../README.booting.md) +--- + +## AMD Xilinx Evaluation Boards BSP Machines files + +The following boards are supported by the meta-xilinx-bsp layer: + +> **Variable usage examples:** +> +> Machine Configuration file: `MACHINE = "zcu102-zynqmp"` +> +> Reference XSA: `HDF_MACHINE = "zcu102-zynqmp"` +> +> HW Board Device tree: `YAML_DT_BOARD_FLAGS = "{BOARD zcu102-rev1.0}"` + +| Devices | Evaluation Board | Machine Configuration file | Reference XSA | HW Board Device tree | QEMU tested | HW tested | +|------------|-------------------------------------------------------------------------------|--------------------------------------------------------------|-----------------------|-------------------------------------|-------------|-----------| +| MicroBlaze | [KC705](https://www.xilinx.com/products/boards-and-kits/ek-k7-kc705-g.html) | [kc705-microblazeel](conf/machine/kc705-microblazeel.conf) | `kc705-microblazeel` | `kc705-full` | Yes | Yes | +| | [AC701](https://www.xilinx.com/products/boards-and-kits/ek-a7-ac701-g.html) | [ac701-microblazeel](conf/machine/ac701-microblazeel.conf) | `ac701-microblazeel` | `ac701-full` | Yes | Yes | +| | [KCU105](https://www.xilinx.com/products/boards-and-kits/kcu105.html) | [kcu105-microblazeel](conf/machine/kcu105-microblazeel.conf) | `kcu105-microblazeel` | `kcu105` | Yes | Yes | +| | [VCU118](https://www.xilinx.com/products/boards-and-kits/vcu118.html) | [vcu118-microblazeel](conf/machine/vcu118-microblazeel.conf) | `vcu118-microblazeel` | `vcu118-rev2.0` | Yes | Yes | +| Zynq-7000 | [ZC702](https://www.xilinx.com/products/boards-and-kits/ek-z7-zc702-g.html) | [zc702-zynq7](conf/machine/zc702-zynq7.conf) | `zc702-zynq7` | `zc702` | Yes | Yes | +| | [ZC706](https://www.xilinx.com/products/boards-and-kits/ek-z7-zc706-g.html) | [zc706-zynq7](conf/machine/zc706-zynq7.conf) | `zc706-zynq7` | `zc706` | Yes | Yes | +| ZynqMP | [ZCU102](https://www.xilinx.com/products/boards-and-kits/ek-u1-zcu102-g.html) | [zcu102-zynqmp](conf/machine/zcu102-zynqmp.conf) | `zcu102-zynqmp` | `zcu102-rev1.0` | Yes | Yes | +| | [ZCU104](https://www.xilinx.com/products/boards-and-kits/zcu104.html) | [zcu104-zynqmp](conf/machine/zcu104-zynqmp.conf) | `zcu104-zynqmp` | `zcu104-revc` | Yes | Yes | +| | [ZCU106](https://www.xilinx.com/products/boards-and-kits/zcu106.html) | [zcu106-zynqmp](conf/machine/zcu106-zynqmp.conf) | `zcu106-zynqmp` | `zcu106-reva` | Yes | Yes | +| | [ZCU111](https://www.xilinx.com/products/boards-and-kits/zcu111.html) | [zcu111-zynqmp](conf/machine/zcu111-zynqmp.conf) | `zcu111-zynqmp` | `zcu111-reva` | Yes | Yes | +| | [ZCU208](https://www.xilinx.com/products/boards-and-kits/zcu208.html) | [zcu208-zynqmp](conf/machine/zcu208-zynqmp.conf) | `zcu208-zynqmp` | `zcu208-reva` | Yes | Yes | +| | [ZCU216](https://www.xilinx.com/products/boards-and-kits/zcu216.html) | [zcu216-zynqmp](conf/machine/zcu216-zynqmp.conf) | `zcu216-zynqmp` | `zcu216-reva` | Yes | Yes | +| | [ZCU670](https://www.xilinx.com/products/boards-and-kits/zcu670.html) | [zcu670-zynqmp](conf/machine/zcu670-zynqmp.conf) | `zcu670-zynqmp` | `zcu670-revb` | Yes | Yes | +| Versal | [VCK190](https://www.xilinx.com/products/boards-and-kits/vck190.html) | [vck190-versal](conf/machine/vck190-versal.conf) | `vck190-versal` | `versal-vck190-reva-x-ebm-01-reva` | Yes | Yes | +| | [VMK180](https://www.xilinx.com/products/boards-and-kits/vmk180.html) | [vmk180-versal](conf/machine/vmk180-versal.conf) | `vmk180-versal` | `versal-vmk180-reva-x-ebm-01-reva` | Yes | Yes | +| | [VCK5000](https://www.xilinx.com/products/boards-and-kits/vck5000.html) | [vck5000-versal](conf/machine/vck5000-versal.conf) | `vck5000-versal` | `versal-vck5000-reva-x-ebm-01-reva` | No | No | +| | [VPK120](https://www.xilinx.com/products/boards-and-kits/vpk120.html) | [vpk120-versal](conf/machine/vpk120-versal.conf) | `vpk120-versal` | `versal-vpk120-reva` | Yes | Yes | +| | [VPK180](https://www.xilinx.com/products/boards-and-kits/vpk180.html) | [vpk180-versal](conf/machine/vpk180-versal.conf) | `vpk180-versal` | `versal-vpk180-reva` | Yes | Yes | +| | [VEK280](https://www.xilinx.com/products/boards-and-kits/vek280.html) | [vek280-versal](conf/machine/vek280-versal.conf) | `vek280-versal` | `versal-vek280-revb` | Yes | Yes | +| | [VHK158](https://www.xilinx.com/products/boards-and-kits/vhk158.html) | [vhk158-versal](conf/machine/vhk158-versal.conf) | `vhk158-versal` | `versal-vhk158-reva` | Yes | Yes | + +> **Note:** Additional information on Xilinx architectures can be found at: + https://www.xilinx.com/products/silicon-devices.html +--- +## Dependencies This layer depends on: - URI: git://git.openembedded.org/bitbake - - URI: git://git.openembedded.org/openembedded-core - layers: meta - -Recipe Licenses -=============== - -Due to licensing restrictions some recipes in this layer rely on closed source -or restricted content provided by Xilinx. In order to use these recipes you must -accept or agree to the licensing terms (e.g. EULA, Export Compliance, NDA, -Redistribution, etc). This layer **does not enforce** any legal requirement, it -is the **responsibility of the user** the ensure that they are in compliance -with any licenses or legal requirements for content used. - -In order to use recipes that rely on restricted content the `xilinx` license -flag must be white-listed in the build configuration (e.g. `local.conf`). This -can be done on a per package basis: - - LICENSE_FLAGS_WHITELIST += "xilinx_pmu-rom" - -or generally: - - LICENSE_FLAGS_WHITELIST += "xilinx" + URI: https://git.yoctoproject.org/poky + layers: meta, meta-poky + branch: langdale -Generally speaking Xilinx content that is provided as a restricted download -cannot be obtained without a Xilinx account, in order to use this content you -must first download it with your Xilinx account and place the downloaded content -in the `downloads/` directory of your build or on a `PREMIRROR`. Attempting to -fetch the content using bitbake will fail, indicating the URL from which to -acquire the content. + URI: https://git.openembedded.org/meta-openembedded + layers: meta-oe + branch: langdale + URI: + https://git.yoctoproject.org/meta-xilinx (official version) + https://github.com/Xilinx/meta-xilinx (development and amd xilinx release) + layers: meta-xilinx-microblaze, meta-xilinx-core + branch: langdale or amd xilinx release version (e.g. rel-v2023.1) diff --git a/meta-xilinx-bsp/README.qemu.md b/meta-xilinx-bsp/README.qemu.md deleted file mode 100644 index 992e0618..00000000 --- a/meta-xilinx-bsp/README.qemu.md +++ /dev/null @@ -1,25 +0,0 @@ - -ZynqMP - PMU ROM ----------------- - -Since Xilinx tool release v2017.1 multiple components (arm-trusted-firmware, -linux, u-boot, etc.) require the PMU firmware to be loaded. For QEMU this also -means that the PMU ROM must be loaded so that the PMU firmware can be used. - -The PMU ROM is not available for download separately from a location that can be -accessed without a Xilinx account. As such the PMU ROM must be obtained manually -by the user. The PMU ROM is available in the ZCU102 PetaLinux BSP, but can be -extracted without the need for the PetaLinux tools. - -Download the BSP (you will need a Xilinx account and agreement to terms): - -https://www.xilinx.com/member/forms/download/xef.html?filename=xilinx-zcu102-v2017.1-final.bsp&akdm=1 - -Once downloaded the PMU ROM can be extracted using the following command and -place `pmu-rom.elf` in the `deploy/images/zcu102-zynqmp/` directory. - -``` -# tar -O -xf xilinx-zcu102-v2017.1-final.bsp \ - xilinx-zcu102-2017.1/pre-built/linux/images/pmu_rom_qemu_sha3.elf > pmu-rom.elf -``` - diff --git a/meta-xilinx-bsp/classes/image-types-xilinx-qemu.bbclass b/meta-xilinx-bsp/classes/image-types-xilinx-qemu.bbclass deleted file mode 100644 index 59dfabfc..00000000 --- a/meta-xilinx-bsp/classes/image-types-xilinx-qemu.bbclass +++ /dev/null @@ -1,10 +0,0 @@ -# Define the 'qemu-sd' conversion type -# -# This conversion type pads any image to the 256K boundary to ensure that the -# image file can be used directly with QEMU's SD emulation which requires the -# block device to match that of valid SD card sizes (which are multiples of -# 256K). - -CONVERSIONTYPES_append = " qemu-sd" -CONVERSION_CMD_qemu-sd = "cp ${IMAGE_NAME}${IMAGE_NAME_SUFFIX}.${type} ${IMAGE_NAME}${IMAGE_NAME_SUFFIX}.${type}.qemu-sd; truncate -s %256K ${IMAGE_NAME}${IMAGE_NAME_SUFFIX}.${type}.qemu-sd" -CONVERSION_DEPENDS_qemu-sd = "coreutils-native" diff --git a/meta-xilinx-bsp/classes/image-wic-utils.bbclass b/meta-xilinx-bsp/classes/image-wic-utils.bbclass deleted file mode 100644 index 6f66d553..00000000 --- a/meta-xilinx-bsp/classes/image-wic-utils.bbclass +++ /dev/null @@ -1,51 +0,0 @@ -# Helper/utility functions to work with the IMAGE_BOOT_FILES variable and its -# expected behvaior with regards to the contents of the DEPLOY_DIR_IMAGE. -# -# The use of these functions assume that the deploy directory is populated with -# any dependent files/etc. Such that the recipe using these functions depends -# on the recipe that provides the files being used/queried. - -def boot_files_split_expand(d): - # IMAGE_BOOT_FILES has extra renaming info in the format '<source>;<target>' - for f in (d.getVar("IMAGE_BOOT_FILES") or "").split(" "): - parts = f.split(";", 1) - sources = [parts[0]] - if "*" in parts[0]: - # has glob part - import glob - deployroot = d.getVar("DEPLOY_DIR_IMAGE") - sources = [] - for i in glob.glob(os.path.join(deployroot, parts[0])): - sources.append(os.path.basename(i)) - - # for all sources, yield an entry - for s in sources: - if len(parts) == 2: - yield s, parts[1] - yield s, s - -def boot_files_bitstream(d): - expectedfiles = [("bitstream", True)] - expectedexts = [(".bit", True), (".bin", False)] - # search for bitstream paths, use the renamed file. First matching is used - for source, target in boot_files_split_expand(d): - # skip boot.bin and u-boot.bin, it is not a bitstream - skip = ["boot.bin", "u-boot.bin"] - if source in skip or target in skip: - continue - - for e, t in expectedfiles: - if source == e or target == e: - return target, t - for e, t in expectedexts: - if source.endswith(e) or target.endswith(e): - return target, t - return "", False - -def boot_files_dtb_filepath(d): - dtbs = (d.getVar("IMAGE_BOOT_FILES") or "").split(" ") - for source, target in boot_files_split_expand(d): - if target.endswith(".dtb"): - return target - return "" - diff --git a/meta-xilinx-bsp/classes/kernel-simpleimage.bbclass b/meta-xilinx-bsp/classes/kernel-simpleimage.bbclass deleted file mode 100644 index 6da28f36..00000000 --- a/meta-xilinx-bsp/classes/kernel-simpleimage.bbclass +++ /dev/null @@ -1,35 +0,0 @@ -python __anonymous () { - kerneltypes = set((d.getVar("KERNEL_IMAGETYPE") or "").split()) - kerneltypes |= set((d.getVar("KERNEL_IMAGETYPES") or "").split()) - if any(t.startswith("simpleImage.") for t in kerneltypes): - # Enable building of simpleImage - bb.build.addtask('do_prep_simpleimage', 'do_compile', 'do_configure', d) - uarch = d.getVar("UBOOT_ARCH") - if uarch == "microblaze": - d.appendVarFlag('do_prep_simpleimage', 'depends', ' virtual/dtb:do_populate_sysroot') -} - -do_prep_simpleimage[dirs] += "${B}" -do_prep_simpleimage () { - install -d ${B}/arch/${ARCH}/boot/dts - for type in ${KERNEL_IMAGETYPES} ; do - if [ -z "${type##*simpleImage*}" ] && [ ${ARCH} = "microblaze" ]; then - ext="${type##*.}" - # Microblaze simpleImage only works with dts file - cp ${RECIPE_SYSROOT}/boot/devicetree/${ext}.dts ${B}/arch/${ARCH}/boot/dts/ - fi - done -} - -do_deploy_append () { - for type in ${KERNEL_IMAGETYPES} ; do - if [ -z "${type##*simpleImage*}" ] && [ ${ARCH} = "microblaze" ]; then - base_name=${imageType}-${KERNEL_IMAGE_NAME} - install -m 0644 ${KERNEL_OUTPUT_DIR}/${type}.strip $deployDir/${base_name}.strip - install -m 0644 ${KERNEL_OUTPUT_DIR}/${type}.unstrip $deployDir/${base_name}.unstrip - symlink_name=${imageType}-${KERNEL_IMAGE_LINK_NAME} - ln -sf ${base_name}.strip $deployDir/${symlink_name}.strip - ln -sf ${base_name}.unstrip $deployDir/${symlink_name}.unstrip - fi - done -} diff --git a/meta-xilinx-bsp/classes/qemuboot-xilinx.bbclass b/meta-xilinx-bsp/classes/qemuboot-xilinx.bbclass deleted file mode 100644 index 024626cb..00000000 --- a/meta-xilinx-bsp/classes/qemuboot-xilinx.bbclass +++ /dev/null @@ -1,27 +0,0 @@ - -# enable the overrides for the context of the conf only -OVERRIDES .= ":qemuboot-xilinx" - -# setup the target binary -QB_SYSTEM_NAME_prepend = "qemu-xilinx/" - -# Default machine targets for Xilinx QEMU (FDT Generic) -QB_MACHINE_aarch64 = "-machine arm-generic-fdt" -QB_MACHINE_arm = "-machine arm-generic-fdt-7series" -QB_MACHINE_microblaze = "-machine microblaze-generic-fdt-plnx" - -# defaults -QB_DEFAULT_KERNEL ?= "none" - -inherit qemuboot - -# rewrite the qemuboot with the custom sysroot bindir -python do_write_qemuboot_conf_append() { - val = os.path.join(d.getVar('BASE_WORKDIR'), d.getVar('BUILD_SYS'), 'qemu-xilinx-helper-native/1.0-r1/recipe-sysroot-native/usr/bin/') - cf.set('config_bsp', 'STAGING_BINDIR_NATIVE', '%s' % val) - - # write out the updated version from this append - with open(qemuboot, 'w') as f: - cf.write(f) -} - diff --git a/meta-xilinx-bsp/classes/xilinx-fetch-restricted.bbclass b/meta-xilinx-bsp/classes/xilinx-fetch-restricted.bbclass deleted file mode 100644 index a778ec7d..00000000 --- a/meta-xilinx-bsp/classes/xilinx-fetch-restricted.bbclass +++ /dev/null @@ -1,35 +0,0 @@ -# This class is setup to override the default fetching for the target recipe. -# When fetching it forces PREMIRROR only fetching so that no attempts are made -# to fetch the Xilinx downloads that are restricted to authenticated users only. -# -# The purpose of this class is to allow for automatation with pre-downloaded -# content or content that is available with curated/user defined pre-mirrors -# and or pre-populated downloads/ directories. - -python do_fetch() { - xilinx_restricted_url = "xilinx.com/member/forms/download" - - src_uri = (d.getVar('SRC_URI') or "").split() - if len(src_uri) == 0: - return - - for i in src_uri: - if xilinx_restricted_url in i: - # force the use of premirrors only, do not attempt download from xilinx.com - d.setVar("BB_FETCH_PREMIRRORONLY", "1") - break - - try: - fetcher = bb.fetch2.Fetch(src_uri, d) - fetcher.download() - except bb.fetch2.NetworkAccess as e: - if xilinx_restricted_url in e.url: - # fatal on access to xilinx.com restricted downloads, print the url for manual download - bb.fatal("The following download cannot be fetched automatically. " \ - "Please manually download the file and place it in the 'downloads' directory (or on an available PREMIRROR).\n" \ - " %s" % (e.url.split(";")[0])) - else: - bb.fatal(str(e)) - except bb.fetch2.BBFetchException as e: - bb.fatal(str(e)) -} diff --git a/meta-xilinx-bsp/classes/xilinx-platform-init.bbclass b/meta-xilinx-bsp/classes/xilinx-platform-init.bbclass deleted file mode 100644 index 5d099500..00000000 --- a/meta-xilinx-bsp/classes/xilinx-platform-init.bbclass +++ /dev/null @@ -1,14 +0,0 @@ -# This class should be included by any recipe that wants to access or provide -# the platform init source files which are used to initialize a Zynq or ZynqMP -# SoC. - -# Define the path to the xilinx platform init code/headers -PLATFORM_INIT_DIR ?= "/usr/src/xilinx-platform-init" - -PLATFORM_INIT_STAGE_DIR = "${STAGING_DIR_HOST}${PLATFORM_INIT_DIR}" - -# Target files use for platform init -PLATFORM_INIT_FILES ?= "" -PLATFORM_INIT_FILES_zynq = "ps7_init_gpl.c ps7_init_gpl.h" -PLATFORM_INIT_FILES_zynqmp = "psu_init_gpl.c psu_init_gpl.h" - diff --git a/meta-xilinx-bsp/classes/xilinx-testimage.bbclass b/meta-xilinx-bsp/classes/xilinx-testimage.bbclass deleted file mode 100644 index 0126d8ba..00000000 --- a/meta-xilinx-bsp/classes/xilinx-testimage.bbclass +++ /dev/null @@ -1,11 +0,0 @@ -inherit testimage - -HOSTTOOLS += 'ip ping ps scp ssh stty' - -python do_testimage_prepend () { - from oeqa.core.target.qemu import supported_fstypes - supported_fstypes.append('wic.qemu-sd') -} - -IMAGE_AUTOLOGIN = "0" -IMAGE_FSTYPES = "wic.qemu-sd" diff --git a/meta-xilinx-bsp/conf/layer.conf b/meta-xilinx-bsp/conf/layer.conf index 437616cf..42990b73 100644 --- a/meta-xilinx-bsp/conf/layer.conf +++ b/meta-xilinx-bsp/conf/layer.conf @@ -5,13 +5,15 @@ BBPATH .= ":${LAYERDIR}" BBFILES += "${LAYERDIR}/recipes-*/*/*.bb" BBFILES += "${LAYERDIR}/recipes-*/*/*.bbappend" -BBFILE_COLLECTIONS += "xilinx" -BBFILE_PATTERN_xilinx = "^${LAYERDIR}/" -BBFILE_PRIORITY_xilinx = "5" +BBFILES_DYNAMIC += " \ +xilinx-tools:${LAYERDIR}/dynamic-layers/meta-xilinx-tools/recipes-*/*/*.bb \ +xilinx-tools:${LAYERDIR}/dynamic-layers/meta-xilinx-tools/recipes-*/*/*.bbappend \ +" -LAYERDEPENDS_xilinx = "core" +BBFILE_COLLECTIONS += "xilinx-bsp" +BBFILE_PATTERN_xilinx-bsp = "^${LAYERDIR}/" +BBFILE_PRIORITY_xilinx-bsp = "5" -LAYERSERIES_COMPAT_xilinx = "warrior" - -BB_DANGLINGAPPENDS_WARNONLY ?= "1" +LAYERDEPENDS_xilinx-bsp = "xilinx" +LAYERSERIES_COMPAT_xilinx-bsp = "scarthgap" diff --git a/meta-xilinx-bsp/conf/machine/ac701-microblazeel.conf b/meta-xilinx-bsp/conf/machine/ac701-microblazeel.conf new file mode 100644 index 00000000..27cb3939 --- /dev/null +++ b/meta-xilinx-bsp/conf/machine/ac701-microblazeel.conf @@ -0,0 +1,50 @@ +#@TYPE: Machine +#@NAME: ac701-microblazeel +#@DESCRIPTION: Machine configuration for the AC701 evaluation board. + +#### Preamble +MACHINEOVERRIDES =. "${@['', 'ac701-microblazeel:']['ac701-microblazeel' !='${MACHINE}']}" +#### Regular settings follow + +# Variables that changes based on hw design or board specific requirement must be +# defined before calling the required inclusion file else pre-expansion value +# defined in microblazeel-generic.conf will be set. + +# Yocto AC701 device-tree variables +YAML_CONSOLE_DEVICE_CONFIG:pn-device-tree ?= "axi_uartlite_0" +YAML_MAIN_MEMORY_CONFIG:pn-device-tree ?= "MIG_7SERIES_0" +DT_PADDING_SIZE:pn-device-tree ?= "0x1000" +DTC_FLAGS:pn-device-tree ?= "" +XSCTH_PROC:pn-device-tree ?= "microblaze_0" +YAML_DT_BOARD_FLAGS ?= "{BOARD ac701-full}" + +# Yocto FS-Boot variables +YAML_SERIAL_CONSOLE_STDIN:pn-fs-boot ?= "axi_uartlite_0" +YAML_SERIAL_CONSOLE_STDOUT:pn-fs-boot ?= "axi_uartlite_0" +YAML_MAIN_MEMORY_CONFIG:pn-fs-boot ?= "MIG_7SERIES_0" +YAML_FLASH_MEMORY_CONFIG:pn-fs-boot ?= "axi_quad_spi_0" +XSCTH_PROC:pn-fs-boot ?= "microblaze_0" + +# Yocto KERNEL Variables +UBOOT_ENTRYPOINT ?= "0x80000000" +UBOOT_LOADADDRESS ?= "0x80000000" + +# ac701-microblazeel Serial Console +SERIAL_CONSOLES ?= "115200;ttyUL0" +YAML_SERIAL_CONSOLE_BAUDRATE ?= "115200" + +# Set DDR Base address for u-boot-xlnx-scr variables +DDR_BASEADDR ?= "0x80000000" +SKIP_APPEND_BASEADDR ?= "0" + +# Required generic machine inclusion +require conf/machine/microblaze-generic.conf + +# This machine conf file uses ac701-microblazeel xsa as reference input. +# User can override with ac701 custom xsa using HDF_BASE and HDF_PATH variables +# from local.conf. +HDF_MACHINE = "ac701-microblazeel" + +#### No additional settings should be after the Postamble +#### Postamble +PACKAGE_EXTRA_ARCHS:append = "${@['', ' ac701_microblazeel']['ac701-microblazeel' != '${MACHINE}']}" diff --git a/meta-xilinx-bsp/conf/machine/include/machine-xilinx-default.inc b/meta-xilinx-bsp/conf/machine/include/machine-xilinx-default.inc deleted file mode 100644 index 1367e57a..00000000 --- a/meta-xilinx-bsp/conf/machine/include/machine-xilinx-default.inc +++ /dev/null @@ -1,87 +0,0 @@ -# Default Xilinx BSP Machine settings - -MACHINE_FEATURES_BACKFILL_CONSIDERED += "rtc" - -# File System Configuration -IMAGE_FSTYPES ?= "tar.gz cpio cpio.gz.u-boot" - -# Kernel Configuration -XILINX_DEFAULT_KERNEL := "linux-xlnx" -XILINX_DEFAULT_KERNEL_microblaze := "linux-yocto" -XILINX_DEFAULT_KERNEL_zynqmp := "linux-yocto" -PREFERRED_PROVIDER_virtual/kernel ??= "${XILINX_DEFAULT_KERNEL}" - -# U-Boot Configuration -XILINX_DEFAULT_UBOOT := "u-boot-xlnx" -XILINX_DEFAULT_UBOOT_zynqmp := "u-boot" -PREFERRED_PROVIDER_virtual/bootloader ??= "${XILINX_DEFAULT_UBOOT}" -PREFERRED_PROVIDER_virtual/boot-bin ??= "${PREFERRED_PROVIDER_virtual/bootloader}" - -UBOOT_SUFFIX ?= "img" -UBOOT_SUFFIX_zynqmp ?= "bin" -UBOOT_SUFFIX_microblaze ?= "bin" - -UBOOT_BINARY ?= "u-boot.${UBOOT_SUFFIX}" -UBOOT_ELF ?= "u-boot" -UBOOT_ELF_zynq ?= "u-boot.elf" -UBOOT_ELF_aarch64 ?= "u-boot.elf" -UBOOT_ELF_versal ?= "u-boot.elf" - -#Hardware accelaration -PREFERRED_PROVIDER_virtual/libgles1_mali400 = "libmali-xlnx" -PREFERRED_PROVIDER_virtual/libgles2_mali400 = "libmali-xlnx" -PREFERRED_PROVIDER_virtual/egl_mali400 = "libmali-xlnx" -PREFERRED_PROVIDER_virtual/libgl_mali400 = "mesa-gl" -PREFERRED_PROVIDER_virtual/mesa_mali400 = "mesa-gl" - -# microblaze does not get on with pie for reasons not looked into as yet -GCCPIE_microblaze = "" -GLIBCPIE_microblaze = "" -SECURITY_CFLAGS_microblaze = "" -SECURITY_LDFLAGS_microblaze = "" - -XSERVER ?= " \ - xserver-xorg \ - xf86-input-evdev \ - xf86-input-mouse \ - xf86-input-keyboard \ - xf86-video-fbdev \ - ${XSERVER_EXT} \ - " - -IMAGE_BOOT_FILES ?= "${@get_default_image_boot_files(d)}" - -def get_default_image_boot_files(d): - files = [] - - # kernel images - kerneltypes = set((d.getVar("KERNEL_IMAGETYPE") or "").split()) - kerneltypes |= set((d.getVar("KERNEL_IMAGETYPES") or "").split()) - for i in kerneltypes: - files.append(i) - - # u-boot image - if d.getVar("UBOOT_BINARY"): - files.append(d.getVar("UBOOT_BINARY")) - - # device trees (device-tree only), these are first as they are likely desired over the kernel ones - if "device-tree" in (d.getVar("MACHINE_ESSENTIAL_EXTRA_RDEPENDS") or ""): - files.append("devicetree/*.dtb") - - - # device trees (kernel only) - if d.getVar("KERNEL_DEVICETREE"): - dtbs = d.getVar("KERNEL_DEVICETREE").split(" ") - dtbs = [os.path.basename(d) for d in dtbs] - for dtb in dtbs: - files.append(dtb) - - return " ".join(files) - -XSERVER_EXT ?= "" -XSERVER_EXT_zynqmp ?= "xf86-video-armsoc" - -# For MicroBlaze default all microblaze machines to use GDB 7.7.1 (for gdbserver/gdb) -PREFERRED_VERSION_gdb_microblaze = "7.7.1" - -FPGA_MNGR_RECONFIG_ENABLE ?= "${@bb.utils.contains('IMAGE_FEATURES', 'fpga-manager', '1', '0', d)}" diff --git a/meta-xilinx-bsp/conf/machine/include/machine-xilinx-overrides.inc b/meta-xilinx-bsp/conf/machine/include/machine-xilinx-overrides.inc deleted file mode 100644 index 30049bc0..00000000 --- a/meta-xilinx-bsp/conf/machine/include/machine-xilinx-overrides.inc +++ /dev/null @@ -1,21 +0,0 @@ -SOC_VARIANT ??= "" -MACHINEOVERRIDES =. "${@['', '${SOC_FAMILY}${SOC_VARIANT}:']['${SOC_VARIANT}' != '']}" - -# Here we can extend overrides for the corresponding family and variant -def get_soc_overrides(fam, var, d): - extender = '' - if (fam == 'zynqmp'): - if (var == 'eg'): - extender = 'mali400:' - elif (var == 'ev'): - extender = 'mali400:vcu:' - return extender - -# Gets OVERRIDES extender depending on the board -SOC_OVERRIDES = "${@get_soc_overrides(d.getVar('SOC_FAMILY'),d.getVar('SOC_VARIANT'), d)}" - -MACHINEOVERRIDES =. "${SOC_OVERRIDES}" - -PACKAGE_EXTRA_ARCHS_append = " ${SOC_FAMILY}" -PACKAGE_EXTRA_ARCHS_append = "${@['', ' ${SOC_FAMILY}${SOC_VARIANT}']['${SOC_VARIANT}' != '']}" - diff --git a/meta-xilinx-bsp/conf/machine/include/machine-xilinx-qemu.inc b/meta-xilinx-bsp/conf/machine/include/machine-xilinx-qemu.inc deleted file mode 100644 index 5eb4b5c4..00000000 --- a/meta-xilinx-bsp/conf/machine/include/machine-xilinx-qemu.inc +++ /dev/null @@ -1,45 +0,0 @@ -# This include is used to setup default QEMU and qemuboot config for meta-xilinx -# machines. - -# depend on qemu-helper-native, which will depend on QEMU -EXTRA_IMAGEDEPENDS += "qemu-helper-native" - -def qemu_default_dtb(d): - if d.getVar("IMAGE_BOOT_FILES", True): - dtbs = d.getVar("IMAGE_BOOT_FILES", True).split(" ") - # IMAGE_BOOT_FILES has extra renaming info in the format '<source>;<target>' - # Note: Wildcard sources work here only because runqemu expands them at run time - dtbs = [f.split(";")[0] for f in dtbs] - dtbs = [f for f in dtbs if f.endswith(".dtb")] - if len(dtbs) != 0: - return dtbs[0] - return "" - -def qemu_default_serial(d): - if d.getVar("SERIAL_CONSOLE", True): - speed, console = d.getVar("SERIAL_CONSOLE", True).split(" ", 1) - # zynqmp uses earlycon and stdout (in dtb) - if "zynqmp" in d.getVar("MACHINEOVERRIDES", True).split(":"): - return "" - return "console=%s,%s earlyprintk" % (console, speed) - return "" - -def qemu_target_binary(d): - ta = d.getVar("TARGET_ARCH", True) - if ta == "microblazeeb": - ta = "microblaze" - elif ta == "arm": - ta = "aarch64" - return "qemu-system-%s" % ta - -def qemu_zynqmp_unhalt(d, multiarch): - if multiarch: - return "-global xlnx,zynqmp-boot.cpu-num=0 -global xlnx,zynqmp-boot.use-pmufw=true" - return "-device loader,addr=0xfd1a0104,data=0x8000000e,data-len=4 -device loader,addr=0xfd1a0104,data=0x8000000e,data-len=4" - -# For qemuboot, default setup across all machines in meta-xilinx -QB_SYSTEM_NAME ?= "${@qemu_target_binary(d)}" -QB_DEFAULT_FSTYPE ?= "cpio" -QB_DTB ?= "${@qemu_default_dtb(d)}" -QB_KERNEL_CMDLINE_APPEND ?= "${@qemu_default_serial(d)}" - diff --git a/meta-xilinx-bsp/conf/machine/include/tune-versal.inc b/meta-xilinx-bsp/conf/machine/include/tune-versal.inc deleted file mode 100644 index 83acf6e0..00000000 --- a/meta-xilinx-bsp/conf/machine/include/tune-versal.inc +++ /dev/null @@ -1,14 +0,0 @@ -DEFAULTTUNE ?= "aarch64" -SOC_FAMILY ?= "versal" - -# Available SOC_VARIANT's for versal: -# virt - -SOC_VARIANT ?= "" - -require conf/machine/include/arm/arch-armv8.inc -require conf/machine/include/soc-family.inc - -# Linux Configuration -KERNEL_IMAGETYPE ?= "Image" - diff --git a/meta-xilinx-bsp/conf/machine/include/tune-zynq.inc b/meta-xilinx-bsp/conf/machine/include/tune-zynq.inc deleted file mode 100644 index f7006026..00000000 --- a/meta-xilinx-bsp/conf/machine/include/tune-zynq.inc +++ /dev/null @@ -1,19 +0,0 @@ -DEFAULTTUNE ?= "cortexa9thf-neon" -SOC_FAMILY ?= "zynq" - -# Available SOC_VARIANT's for zynq: -# 7zs - Zynq-7000 Single A9 Core -# 7z - Zynq-7000 Dual A9 Core - -SOC_VARIANT ?= "7z" - -require conf/machine/include/tune-cortexa9.inc -require conf/machine/include/soc-family.inc - -# Linux Configuration -KERNEL_IMAGETYPE ?= "uImage" -KERNEL_IMAGETYPES += "zImage" - -# Set default load address. -# Override with KERNEL_EXTRA_ARGS_<board> += "..." in machine file if required -KERNEL_EXTRA_ARGS_zynq += "UIMAGE_LOADADDR=0x8000" diff --git a/meta-xilinx-bsp/conf/machine/include/tune-zynqmp.inc b/meta-xilinx-bsp/conf/machine/include/tune-zynqmp.inc deleted file mode 100644 index cbfa47b8..00000000 --- a/meta-xilinx-bsp/conf/machine/include/tune-zynqmp.inc +++ /dev/null @@ -1,18 +0,0 @@ -DEFAULTTUNE ?= "aarch64" -SOC_FAMILY ?= "zynqmp" - -# Available SOC_VARIANT's for zynqmp: -# "cg" - Zynq UltraScale+ CG Devices -# "eg" - Zynq UltraScale+ EG Devices -# "ev" - Zynq UltraScale+ EV Devices - -SOC_VARIANT ?= "eg" - -require conf/machine/include/arm/arch-armv8a.inc -require conf/machine/include/soc-family.inc - -# Linux Configuration -KERNEL_IMAGETYPE ?= "Image" - -# Support multilib on zynqmp -DEFAULTTUNE_virtclass-multilib-lib32 ?= "armv7vethf-neon-vfpv4" diff --git a/meta-xilinx-bsp/conf/machine/kc705-microblazeel.conf b/meta-xilinx-bsp/conf/machine/kc705-microblazeel.conf index d79e4efd..f3236f07 100644 --- a/meta-xilinx-bsp/conf/machine/kc705-microblazeel.conf +++ b/meta-xilinx-bsp/conf/machine/kc705-microblazeel.conf @@ -1,24 +1,50 @@ #@TYPE: Machine #@NAME: kc705-microblazeel -#@DESCRIPTION: Machine support for Xilinx KC705 Embedded Kit. -# - -require conf/machine/include/tune-microblaze.inc -require conf/machine/include/machine-xilinx-default.inc - -TUNE_FEATURES_tune-microblaze += "v11.0 barrel-shift reorder pattern-compare multiply-high divide-hard" - -MACHINE_FEATURES = "" - -USE_VT = "" -SERIAL_CONSOLE = "115200 ttyS0" - -KERNEL_IMAGETYPE ?= "linux.bin.ub" - -MACHINE_ESSENTIAL_EXTRA_RDEPENDS += "device-tree" -PREFERRED_PROVIDER_virtual/kernel ?= "linux-xlnx" -PREFERRED_PROVIDER_virtual/bootloader ?= "u-boot-xlnx" - -EXTRA_IMAGEDEPENDS += "virtual/bitstream virtual/bootloader" - -UBOOT_MACHINE ?= "microblaze-generic_config" +#@DESCRIPTION: Machine configuration for the KC705 evaluation board. + +#### Preamble +MACHINEOVERRIDES =. "${@['', 'kc705-microblazeel:']['kc705-microblazeel' !='${MACHINE}']}" +#### Regular settings follow + +# Variables that changes based on hw design or board specific requirement must be +# defined before calling the required inclusion file else pre-expansion value +# defined in microblazeel-generic.conf will be set. + +# Yocto device-tree variables +YAML_CONSOLE_DEVICE_CONFIG:pn-device-tree ?= "axi_uartlite_0" +YAML_MAIN_MEMORY_CONFIG:pn-device-tree ?= "MIG_7SERIES_0" +DT_PADDING_SIZE:pn-device-tree ?= "0x1000" +DTC_FLAGS:pn-device-tree ?= "" +XSCTH_PROC:pn-device-tree ?= "microblaze_0" +YAML_DT_BOARD_FLAGS ?= "{BOARD kc705-full}" + +# Yocto FS-Boot variables +YAML_SERIAL_CONSOLE_STDIN:pn-fs-boot ?= "axi_uartlite_0" +YAML_SERIAL_CONSOLE_STDOUT:pn-fs-boot ?= "axi_uartlite_0" +YAML_MAIN_MEMORY_CONFIG:pn-fs-boot ?= "MIG_7SERIES_0" +YAML_FLASH_MEMORY_CONFIG:pn-fs-boot ?= "axi_emc_0" +XSCTH_PROC:pn-fs-boot ?= "microblaze_0" + +# Yocto KERNEL Variables +UBOOT_ENTRYPOINT ?= "0x80000000" +UBOOT_LOADADDRESS ?= "0x80000000" + +# kc705-microblazeel Serial Console +SERIAL_CONSOLES ?= "115200;ttyUL0" +YAML_SERIAL_CONSOLE_BAUDRATE ?= "115200" + +# Set DDR Base address for u-boot-xlnx-scr variables +DDR_BASEADDR ?= "0x80000000" +SKIP_APPEND_BASEADDR ?= "0" + +# Required generic machine inclusion +require conf/machine/microblaze-generic.conf + +# This machine conf file uses kc705-microblazeel xsa as reference input. +# User can override with kc705 custom xsa using HDF_BASE and HDF_PATH variables +# from local.conf. +HDF_MACHINE = "kc705-microblazeel" + +#### No additional settings should be after the Postamble +#### Postamble +PACKAGE_EXTRA_ARCHS:append = "${@['', ' kc705_microblazeel']['kc705-microblazeel' != '${MACHINE}']}" diff --git a/meta-xilinx-bsp/conf/machine/kcu105-microblazeel.conf b/meta-xilinx-bsp/conf/machine/kcu105-microblazeel.conf new file mode 100644 index 00000000..a866f87c --- /dev/null +++ b/meta-xilinx-bsp/conf/machine/kcu105-microblazeel.conf @@ -0,0 +1,50 @@ +#@TYPE: Machine +#@NAME: kcu105-microblazeel +#@DESCRIPTION: Machine configuration for the KCU105 evaluation board. + +#### Preamble +MACHINEOVERRIDES =. "${@['', 'kcu105-microblazeel:']['kcu105-microblazeel' !='${MACHINE}']}" +#### Regular settings follow + +# Variables that changes based on hw design or board specific requirement must be +# defined before calling the required inclusion file else pre-expansion value +# defined in microblazeel-generic.conf will be set. + +# Yocto KCU105 device-tree variables +YAML_CONSOLE_DEVICE_CONFIG:pn-device-tree ?= "axi_uartlite_0" +YAML_MAIN_MEMORY_CONFIG:pn-device-tree ?= "DDR4_0" +DT_PADDING_SIZE:pn-device-tree ?= "0x1000" +DTC_FLAGS:pn-device-tree ?= "" +XSCTH_PROC:pn-device-tree ?= "microblaze_0" +YAML_DT_BOARD_FLAGS ?= "{BOARD kcu105}" + +# Yocto FS-Boot variables +YAML_SERIAL_CONSOLE_STDIN:pn-fs-boot ?= "axi_uartlite_0" +YAML_SERIAL_CONSOLE_STDOUT:pn-fs-boot ?= "axi_uartlite_0" +YAML_MAIN_MEMORY_CONFIG:pn-fs-boot ?= "DDR4_0" +YAML_FLASH_MEMORY_CONFIG:pn-fs-boot ?= "axi_quad_spi_0" +XSCTH_PROC:pn-fs-boot ?= "microblaze_0" + +# Yocto KERNEL Variables +UBOOT_ENTRYPOINT ?= "0x80000000" +UBOOT_LOADADDRESS ?= "0x80000000" + +# kcu105-microblazeel Serial Console +SERIAL_CONSOLES ?= "115200;ttyUL0" +YAML_SERIAL_CONSOLE_BAUDRATE ?= "115200" + +# Set DDR Base address for u-boot-xlnx-scr variables +DDR_BASEADDR ?= "0x80000000" +SKIP_APPEND_BASEADDR ?= "0" + +# Required generic machine inclusion +require conf/machine/microblaze-generic.conf + +# This machine conf file uses kcu105-microblazeel xsa as reference input. +# User can override with kcu105 custom xsa using HDF_BASE and HDF_PATH variables +# from local.conf. +HDF_MACHINE = "kcu105-microblazeel" + +#### No additional settings should be after the Postamble +#### Postamble +PACKAGE_EXTRA_ARCHS:append = "${@['', ' kcu105_microblazeel']['kcu105-microblazeel' != '${MACHINE}']}" diff --git a/meta-xilinx-bsp/conf/machine/microblazeel-v11.0-bs-cmp-mh-div-generic.conf b/meta-xilinx-bsp/conf/machine/microblazeel-v11.0-bs-cmp-mh-div-generic.conf index 00aede11..96b4e6d1 100644 --- a/meta-xilinx-bsp/conf/machine/microblazeel-v11.0-bs-cmp-mh-div-generic.conf +++ b/meta-xilinx-bsp/conf/machine/microblazeel-v11.0-bs-cmp-mh-div-generic.conf @@ -2,16 +2,6 @@ #@NAME: microblazeel-v11.0-bs-cmp-mh-div-generic #@DESCRIPTION: microblazeel-v11.0-bs-cmp-mh-div -require conf/machine/include/tune-microblaze.inc -require conf/machine/include/machine-xilinx-default.inc +TUNE_FEATURES:tune-microblaze ?= "microblaze v11.0 barrel-shift pattern-compare reorder divide-hard multiply-high" -TUNE_FEATURES_tune-microblaze += "v11.0 barrel-shift pattern-compare reorder divide-hard multiply-high" - -MACHINE_FEATURES = "" - -KERNEL_IMAGETYPE = "linux.bin.ub" -KERNEL_IMAGETYPES = "" - -SERIAL_CONSOLE = "115200 ttyS0" - -EXTRA_IMAGEDEPENDS += "libyaml-native python3-cython-native python3-pyyaml-native" +require conf/machine/microblaze-generic.conf diff --git a/meta-xilinx-bsp/conf/machine/microblazeel-v11.0-bs-cmp-ml-generic.conf b/meta-xilinx-bsp/conf/machine/microblazeel-v11.0-bs-cmp-ml-generic.conf index 30afbd71..cf83acf8 100644 --- a/meta-xilinx-bsp/conf/machine/microblazeel-v11.0-bs-cmp-ml-generic.conf +++ b/meta-xilinx-bsp/conf/machine/microblazeel-v11.0-bs-cmp-ml-generic.conf @@ -2,16 +2,6 @@ #@NAME: microblazeel-v11.0-bs-cmp-ml-generic #@DESCRIPTION: microblazeel-v11.0-bs-cmp-ml -require conf/machine/include/tune-microblaze.inc -require conf/machine/include/machine-xilinx-default.inc +TUNE_FEATURES:tune-microblaze ?= "microblaze v11.0 barrel-shift reorder pattern-compare multiply-low" -TUNE_FEATURES_tune-microblaze += "v11.0 barrel-shift reorder pattern-compare multiply-low" - -MACHINE_FEATURES = "" - -KERNEL_IMAGETYPE = "linux.bin.ub" -KERNEL_IMAGETYPES = "" - -SERIAL_CONSOLE = "115200 ttyS0" - -EXTRA_IMAGEDEPENDS += "libyaml-native python3-cython-native python3-pyyaml-native" +require conf/machine/microblaze-generic.conf diff --git a/meta-xilinx-bsp/conf/machine/microzed-zynq7.conf b/meta-xilinx-bsp/conf/machine/microzed-zynq7.conf deleted file mode 100644 index 83c5fc1e..00000000 --- a/meta-xilinx-bsp/conf/machine/microzed-zynq7.conf +++ /dev/null @@ -1,33 +0,0 @@ -#@TYPE: Machine -#@NAME: microzed-zynq7 -#@DESCRIPTION: Machine support for microZed. (http://www.microzed.org/) - -SOC_VARIANT ?= "7z" - -require conf/machine/include/tune-zynq.inc -require conf/machine/include/machine-xilinx-overrides.inc -require conf/machine/include/machine-xilinx-default.inc - -MACHINE_FEATURES = "ext2 vfat usbhost" - -# u-boot configuration -PREFERRED_PROVIDER_virtual/bootloader = "u-boot" -UBOOT_MACHINE = "zynq_microzed_config" -SPL_BINARY ?= "spl/boot.bin" -UBOOT_ELF_zynq = "u-boot" - -EXTRA_IMAGEDEPENDS += " \ - u-boot-zynq-uenv \ - virtual/boot-bin \ - virtual/bootloader \ - " - -SERIAL_CONSOLE = "115200 ttyPS0" - -KERNEL_DEVICETREE = "zynq-microzed.dtb" - -IMAGE_BOOT_FILES += " \ - boot.bin \ - uEnv.txt \ - " - diff --git a/meta-xilinx-bsp/conf/machine/ml605-qemu-microblazeel.conf b/meta-xilinx-bsp/conf/machine/ml605-qemu-microblazeel.conf deleted file mode 100644 index f4ddb6df..00000000 --- a/meta-xilinx-bsp/conf/machine/ml605-qemu-microblazeel.conf +++ /dev/null @@ -1,27 +0,0 @@ -#@TYPE: Machine -#@NAME: ml605-qemu-microblazeel -#@DESCRIPTION: MicroBlaze QEMU machine support ('petalogix-ml605' model) - -require conf/machine/include/tune-microblaze.inc -require conf/machine/include/machine-xilinx-default.inc -require conf/machine/include/machine-xilinx-qemu.inc - -TUNE_FEATURES_tune-microblaze += "v8.50 barrel-shift reorder pattern-compare divide-hard multiply-high fpu-hard" - -MACHINE_FEATURES = "" - -USE_VT = "" -SERIAL_CONSOLE = "115200 ttyS0" - -KERNEL_IMAGETYPE ?= "linux.bin.ub" - -# Use the networking setup from qemuarm -FILESOVERRIDES_append_pn-init-ifupdown = ":qemuarm" - -# This machine is a targeting a QEMU model, runqemu setup: -IMAGE_CLASSES += "qemuboot" -QB_MEM = "-m 256" -QB_MACHINE = "-machine petalogix-ml605" -QB_OPT_APPEND = "-nographic -serial mon:stdio" -QB_NETWORK_DEVICE = "-net nic,netdev=net0,macaddr=@MAC@" - diff --git a/meta-xilinx-bsp/conf/machine/picozed-zynq7.conf b/meta-xilinx-bsp/conf/machine/picozed-zynq7.conf deleted file mode 100644 index c229dac6..00000000 --- a/meta-xilinx-bsp/conf/machine/picozed-zynq7.conf +++ /dev/null @@ -1,37 +0,0 @@ -#@TYPE: Machine -#@NAME: picozed-zynq7 -#@DESCRIPTION: Machine support for picoZed. (http://www.picozed.org/) -# -# Note: This machine configuration is intended as a generic config for -# the picozed SOM. It also covers the multiple SKUs for the picoZed -# including 7010, 7020, 7015 and 7030. - -SOC_VARIANT ?= "7z" - -require conf/machine/include/tune-zynq.inc -require conf/machine/include/machine-xilinx-overrides.inc -require conf/machine/include/machine-xilinx-default.inc - -MACHINE_FEATURES = "ext2 vfat usbhost usbgadget" - -# u-boot configuration -PREFERRED_PROVIDER_virtual/bootloader = "u-boot" -UBOOT_MACHINE = "zynq_picozed_config" -SPL_BINARY ?= "spl/boot.bin" -UBOOT_ELF_zynq = "u-boot" - -EXTRA_IMAGEDEPENDS += " \ - u-boot-zynq-uenv \ - virtual/boot-bin \ - virtual/bootloader \ - " - -SERIAL_CONSOLE = "115200 ttyPS0" - -MACHINE_ESSENTIAL_EXTRA_RDEPENDS += "device-tree" - -IMAGE_BOOT_FILES += " \ - boot.bin \ - uEnv.txt \ - " - diff --git a/meta-xilinx-bsp/conf/machine/qemu-zynq7.conf b/meta-xilinx-bsp/conf/machine/qemu-zynq7.conf deleted file mode 100644 index 97251048..00000000 --- a/meta-xilinx-bsp/conf/machine/qemu-zynq7.conf +++ /dev/null @@ -1,27 +0,0 @@ -#@TYPE: Machine -#@NAME: qemu-zynq7 -#@DESCRIPTION: Zynq QEMU machine support ('xilinx-zynq-a9' model) - -SOC_VARIANT ?= "7z" - -require conf/machine/include/tune-zynq.inc -require conf/machine/include/machine-xilinx-overrides.inc -require conf/machine/include/machine-xilinx-default.inc -require conf/machine/include/machine-xilinx-qemu.inc - -MACHINE_FEATURES = "ext2 vfat" - -SERIAL_CONSOLE = "115200 ttyPS0" - -MACHINE_ESSENTIAL_EXTRA_RDEPENDS += "device-tree" - -# Use the networking setup from qemuarm -FILESOVERRIDES_append_pn-init-ifupdown = ":qemuarm" - -# This machine is a targeting a QEMU model, runqemu setup: -IMAGE_CLASSES += "qemuboot" -QB_MEM = "-m 1024" -QB_MACHINE = "-machine xilinx-zynq-a9" -QB_OPT_APPEND = "-nographic -serial null -serial mon:stdio" -QB_NETWORK_DEVICE = "-net nic,netdev=net0,macaddr=@MAC@" - diff --git a/meta-xilinx-bsp/conf/machine/qemu-zynqmp-cg.conf b/meta-xilinx-bsp/conf/machine/qemu-zynqmp-cg.conf new file mode 100644 index 00000000..cb92bc71 --- /dev/null +++ b/meta-xilinx-bsp/conf/machine/qemu-zynqmp-cg.conf @@ -0,0 +1,42 @@ +#@TYPE: Machine +#@NAME: QEMU ZynqMP CG machine +#@DESCRIPTION: Machine configuration for running a ZynqMP CG system on QEMU w/ testimage + +# This machine is NOT designed to be inherited by other machines or used as an +# example of how to create a machine. It is only useful for running testimage +# with runqemu. + +#### Preamble +MACHINEOVERRIDES =. "${@['', 'qemu-zynqmp-cg:']['qemu-zynqmp-cg' !='${MACHINE}']}" +#### Regular settings follow + +# The following is from conf/machine/include/qemu.inc, but we can not use it +# as it changes other values that need to come from the distro and the +# AMD machine settings +XSERVER ?= "xserver-xorg \ + ${@bb.utils.contains('DISTRO_FEATURES', 'opengl', 'mesa-driver-swrast xserver-xorg-extension-glx', '', d)} \ + xf86-video-fbdev \ + xf86-video-modesetting \ + " + +MACHINE_FEATURES = "alsa bluetooth usbgadget screen vfat" + +MACHINEOVERRIDES =. "qemuall:" + +IMAGE_FSTYPES += "tar.bz2 ext4" + +# Don't include kernels in standard images +RDEPENDS:${KERNEL_PACKAGE_NAME}-base = "" + +# Provide the nfs server kernel module for all qemu images +KERNEL_FEATURES:append:pn-linux-yocto = " features/nfsd/nfsd-enable.scc" +KERNEL_FEATURES:append:pn-linux-yocto-rt = " features/nfsd/nfsd-enable.scc" +KERNEL_FEATURES:append:pn-linux-xlnx = " features/nfsd/nfsd-enable.scc" + + +# Now include the generic machine which already supports QEMU booting +require conf/machine/zynqmp-cg-generic.conf + +#### No additional settings should be after the Postamble +#### Postamble +PACKAGE_EXTRA_ARCHS:append = "${@['', ' qemu_zynqmp_cg']['qemu-zynqmp-cg' != '${MACHINE}']}" diff --git a/meta-xilinx-bsp/conf/machine/qemu-zynqmp-dr.conf b/meta-xilinx-bsp/conf/machine/qemu-zynqmp-dr.conf new file mode 100644 index 00000000..5fcb3541 --- /dev/null +++ b/meta-xilinx-bsp/conf/machine/qemu-zynqmp-dr.conf @@ -0,0 +1,42 @@ +#@TYPE: Machine +#@NAME: QEMU ZynqMP DR machine +#@DESCRIPTION: Machine configuration for running a ZynqMP DR system on QEMU w/ testimage + +# This machine is NOT designed to be inherited by other machines or used as an +# example of how to create a machine. It is only useful for running testimage +# with runqemu. + +#### Preamble +MACHINEOVERRIDES =. "${@['', 'qemu-zynqmp-dr:']['qemu-zynqmp-dr' !='${MACHINE}']}" +#### Regular settings follow + +# The following is from conf/machine/include/qemu.inc, but we can not use it +# as it changes other values that need to come from the distro and the +# AMD machine settings +XSERVER ?= "xserver-xorg \ + ${@bb.utils.contains('DISTRO_FEATURES', 'opengl', 'mesa-driver-swrast xserver-xorg-extension-glx', '', d)} \ + xf86-video-fbdev \ + xf86-video-modesetting \ + " + +MACHINE_FEATURES = "alsa bluetooth usbgadget screen vfat" + +MACHINEOVERRIDES =. "qemuall:" + +IMAGE_FSTYPES += "tar.bz2 ext4" + +# Don't include kernels in standard images +RDEPENDS:${KERNEL_PACKAGE_NAME}-base = "" + +# Provide the nfs server kernel module for all qemu images +KERNEL_FEATURES:append:pn-linux-yocto = " features/nfsd/nfsd-enable.scc" +KERNEL_FEATURES:append:pn-linux-yocto-rt = " features/nfsd/nfsd-enable.scc" +KERNEL_FEATURES:append:pn-linux-xlnx = " features/nfsd/nfsd-enable.scc" + + +# Now include the generic machine which already supports QEMU booting +require conf/machine/zynqmp-dr-generic.conf + +#### No additional settings should be after the Postamble +#### Postamble +PACKAGE_EXTRA_ARCHS:append = "${@['', ' qemu_zynqmp_dr']['qemu-zynqmp-dr' != '${MACHINE}']}" diff --git a/meta-xilinx-bsp/conf/machine/qemu-zynqmp-eg.conf b/meta-xilinx-bsp/conf/machine/qemu-zynqmp-eg.conf new file mode 100644 index 00000000..5f4b972c --- /dev/null +++ b/meta-xilinx-bsp/conf/machine/qemu-zynqmp-eg.conf @@ -0,0 +1,42 @@ +#@TYPE: Machine +#@NAME: QEMU ZynqMP EG machine +#@DESCRIPTION: Machine configuration for running a ZynqMP EG system on QEMU w/ testimage + +# This machine is NOT designed to be inherited by other machines or used as an +# example of how to create a machine. It is only useful for running testimage +# with runqemu. + +#### Preamble +MACHINEOVERRIDES =. "${@['', 'qemu-zynqmp-eg:']['qemu-zynqmp-eg' !='${MACHINE}']}" +#### Regular settings follow + +# The following is from conf/machine/include/qemu.inc, but we can not use it +# as it changes other values that need to come from the distro and the +# AMD machine settings +XSERVER ?= "xserver-xorg \ + ${@bb.utils.contains('DISTRO_FEATURES', 'opengl', 'mesa-driver-swrast xserver-xorg-extension-glx', '', d)} \ + xf86-video-fbdev \ + xf86-video-modesetting \ + " + +MACHINE_FEATURES = "alsa bluetooth usbgadget screen vfat" + +MACHINEOVERRIDES =. "qemuall:" + +IMAGE_FSTYPES += "tar.bz2 ext4" + +# Don't include kernels in standard images +RDEPENDS:${KERNEL_PACKAGE_NAME}-base = "" + +# Provide the nfs server kernel module for all qemu images +KERNEL_FEATURES:append:pn-linux-yocto = " features/nfsd/nfsd-enable.scc" +KERNEL_FEATURES:append:pn-linux-yocto-rt = " features/nfsd/nfsd-enable.scc" +KERNEL_FEATURES:append:pn-linux-xlnx = " features/nfsd/nfsd-enable.scc" + + +# Now include the generic machine which already supports QEMU booting +require conf/machine/zynqmp-eg-generic.conf + +#### No additional settings should be after the Postamble +#### Postamble +PACKAGE_EXTRA_ARCHS:append = "${@['', ' qemu_zynqmp_eg']['qemu-zynqmp-eg' != '${MACHINE}']}" diff --git a/meta-xilinx-bsp/conf/machine/qemu-zynqmp-ev.conf b/meta-xilinx-bsp/conf/machine/qemu-zynqmp-ev.conf new file mode 100644 index 00000000..6058bfa4 --- /dev/null +++ b/meta-xilinx-bsp/conf/machine/qemu-zynqmp-ev.conf @@ -0,0 +1,42 @@ +#@TYPE: Machine +#@NAME: QEMU ZynqMP EV machine +#@DESCRIPTION: Machine configuration for running a ZynqMP EV system on QEMU w/ testimage + +# This machine is NOT designed to be inherited by other machines or used as an +# example of how to create a machine. It is only useful for running testimage +# with runqemu. + +#### Preamble +MACHINEOVERRIDES =. "${@['', 'qemu-zynqmp-ev:']['qemu-zynqmp-ev' !='${MACHINE}']}" +#### Regular settings follow + +# The following is from conf/machine/include/qemu.inc, but we can not use it +# as it changes other values that need to come from the distro and the +# AMD machine settings +XSERVER ?= "xserver-xorg \ + ${@bb.utils.contains('DISTRO_FEATURES', 'opengl', 'mesa-driver-swrast xserver-xorg-extension-glx', '', d)} \ + xf86-video-fbdev \ + xf86-video-modesetting \ + " + +MACHINE_FEATURES = "alsa bluetooth usbgadget screen vfat" + +MACHINEOVERRIDES =. "qemuall:" + +IMAGE_FSTYPES += "tar.bz2 ext4" + +# Don't include kernels in standard images +RDEPENDS:${KERNEL_PACKAGE_NAME}-base = "" + +# Provide the nfs server kernel module for all qemu images +KERNEL_FEATURES:append:pn-linux-yocto = " features/nfsd/nfsd-enable.scc" +KERNEL_FEATURES:append:pn-linux-yocto-rt = " features/nfsd/nfsd-enable.scc" +KERNEL_FEATURES:append:pn-linux-xlnx = " features/nfsd/nfsd-enable.scc" + + +# Now include the generic machine which already supports QEMU booting +require conf/machine/zynqmp-ev-generic.conf + +#### No additional settings should be after the Postamble +#### Postamble +PACKAGE_EXTRA_ARCHS:append = "${@['', ' qemu_zynqmp_ev']['qemu-zynqmp-ev' != '${MACHINE}']}" diff --git a/meta-xilinx-bsp/conf/machine/qemu-zynqmp.conf b/meta-xilinx-bsp/conf/machine/qemu-zynqmp.conf new file mode 100644 index 00000000..91a96ede --- /dev/null +++ b/meta-xilinx-bsp/conf/machine/qemu-zynqmp.conf @@ -0,0 +1,45 @@ +#@TYPE: Machine +#@NAME: QEMU ZynqMP machine +#@DESCRIPTION: Machine configuration for running a ZynqMP system on QEMU w/ testimage + +# This machine is NOT designed to be inherited by other machines or used as an +# example of how to create a machine. It is only useful for running testimage +# with runqemu. + +#### Preamble +MACHINEOVERRIDES =. "${@['', 'qemu-zynqmp:']['qemu-zynqmp' !='${MACHINE}']}" +#### Regular settings follow + +# The following is from conf/machine/include/qemu.inc, but we can not use it +# as it changes other values that need to come from the distro and the +# AMD machine settings +XSERVER ?= "xserver-xorg \ + ${@bb.utils.contains('DISTRO_FEATURES', 'opengl', 'mesa-driver-swrast xserver-xorg-extension-glx', '', d)} \ + xf86-video-fbdev \ + xf86-video-modesetting \ + " + +MACHINE_FEATURES = "alsa bluetooth usbgadget screen vfat" + +MACHINEOVERRIDES =. "qemuall:" + +IMAGE_FSTYPES += "tar.bz2 ext4" + +# Don't include kernels in standard images +RDEPENDS:${KERNEL_PACKAGE_NAME}-base = "" + +# Provide the nfs server kernel module for all qemu images +KERNEL_FEATURES:append:pn-linux-yocto = " features/nfsd/nfsd-enable.scc" +KERNEL_FEATURES:append:pn-linux-yocto-rt = " features/nfsd/nfsd-enable.scc" +KERNEL_FEATURES:append:pn-linux-xlnx = " features/nfsd/nfsd-enable.scc" + + +# Now include the generic machine which already supports QEMU booting +require conf/machine/zynqmp-generic.conf + +# This may break standalone runqemu, but allows testimage to work +QB_XILINX_SERIAL = "" + +#### No additional settings should be after the Postamble +#### Postamble +PACKAGE_EXTRA_ARCHS:append = "${@['', ' qemu_zynqmp']['qemu-zynqmp' != '${MACHINE}']}" diff --git a/meta-xilinx-bsp/conf/machine/s3adsp1800-qemu-microblazeeb.conf b/meta-xilinx-bsp/conf/machine/s3adsp1800-qemu-microblazeeb.conf deleted file mode 100644 index 3a21eb78..00000000 --- a/meta-xilinx-bsp/conf/machine/s3adsp1800-qemu-microblazeeb.conf +++ /dev/null @@ -1,24 +0,0 @@ -#@TYPE: Machine -#@NAME: s3adsp1800-qemu-microblazeeb -#@DESCRIPTION: MicroBlaze QEMU machine support ('petalogix-s3adsp1800' model) - -require conf/machine/include/tune-microblaze.inc -require conf/machine/include/machine-xilinx-default.inc -require conf/machine/include/machine-xilinx-qemu.inc - -TUNE_FEATURES_tune-microblaze += "v8.00 bigendian barrel-shift pattern-compare multiply-low" - -MACHINE_FEATURES = "" - -USE_VT = "" -SERIAL_CONSOLE = "115200 ttyUL0" - -KERNEL_IMAGETYPE ?= "linux.bin.ub" - -# This machine is a targeting a QEMU model, runqemu setup: -IMAGE_CLASSES += "qemuboot" -QB_MEM = "-m 256" -QB_MACHINE = "-machine petalogix-s3adsp1800" -QB_OPT_APPEND = "-nographic -serial mon:stdio" -QB_NETWORK_DEVICE = "-net nic,netdev=net0,macaddr=@MAC@" - diff --git a/meta-xilinx-bsp/conf/machine/vck190-versal.conf b/meta-xilinx-bsp/conf/machine/vck190-versal.conf new file mode 100644 index 00000000..ed049268 --- /dev/null +++ b/meta-xilinx-bsp/conf/machine/vck190-versal.conf @@ -0,0 +1,45 @@ +#@TYPE: Machine +#@NAME: vck190-versal +#@DESCRIPTION: Machine configuration for the VCK190 evaluation board. + +#### Preamble +MACHINEOVERRIDES =. "${@['', 'vck190-versal:']['vck190-versal' !='${MACHINE}']}" +#### Regular settings follow + +# Variables that changes based on hw design or board specific requirement must be +# defined before calling the required inclusion file else pre-expansion value +# defined in versal-generic.conf will be set. + +# Yocto device-tree variables +YAML_CONSOLE_DEVICE_CONFIG:pn-device-tree ?= "CIPS_0_pspmc_0_psv_sbsauart_0" +YAML_DT_BOARD_FLAGS ?= "{BOARD versal-vck190-reva-x-ebm-01-reva}" + +# Yocto arm-trusted-firmware(TF-A) variables +ATF_CONSOLE ?= "pl011" +TFA_BL33_LOAD ?= "0x8000000" + +# Yocto PLM variables +YAML_SERIAL_CONSOLE_STDIN:pn-plm-firmware ?= "CIPS_0_pspmc_0_psv_sbsauart_0" +YAML_SERIAL_CONSOLE_STDOUT:pn-plm-firmware ?= "CIPS_0_pspmc_0_psv_sbsauart_0" + +# Yocto KERNEL Variables +UBOOT_ENTRYPOINT ?= "0x200000" +UBOOT_LOADADDRESS ?= "0x200000" + +# vck190-versal Serial Console +SERIAL_CONSOLES ?= "115200;ttyAMA0" +YAML_SERIAL_CONSOLE_BAUDRATE ?= "115200" + +# Required generic machine inclusion +# VCK190 board uses Versal AI Core device hence use soc variant based generic +# machine inclusion +require conf/machine/versal-ai-core-generic.conf + +# This machine conf file uses vck190-versal xsa as reference input. +# User can override with vck190 custom xsa using HDF_BASE and HDF_PATH variables +# from local.conf. +HDF_MACHINE = "vck190-versal" + +#### No additional settings should be after the Postamble +#### Postamble +PACKAGE_EXTRA_ARCHS:append = "${@['', ' vck190_versal']['vck190-versal' != '${MACHINE}']}" diff --git a/meta-xilinx-bsp/conf/machine/vcu118-microblazeel.conf b/meta-xilinx-bsp/conf/machine/vcu118-microblazeel.conf new file mode 100644 index 00000000..bfd60336 --- /dev/null +++ b/meta-xilinx-bsp/conf/machine/vcu118-microblazeel.conf @@ -0,0 +1,50 @@ +#@TYPE: Machine +#@NAME: vcu118-microblazeel +#@DESCRIPTION: Machine configuration for the VCU118 evaluation board. + +#### Preamble +MACHINEOVERRIDES =. "${@['', 'vcu118-microblazeel:']['vcu118-microblazeel' !='${MACHINE}']}" +#### Regular settings follow + +# Variables that changes based on hw design or board specific requirement must be +# defined before calling the required inclusion file else pre-expansion value +# defined in microblazeel-generic.conf will be set. + +# Yocto VCU118 device-tree variables +YAML_CONSOLE_DEVICE_CONFIG:pn-device-tree ?= "axi_uartlite_0" +YAML_MAIN_MEMORY_CONFIG:pn-device-tree ?= "DDR4_0" +DT_PADDING_SIZE:pn-device-tree ?= "0x1000" +DTC_FLAGS:pn-device-tree ?= "" +XSCTH_PROC:pn-device-tree ?= "microblaze_0" +YAML_DT_BOARD_FLAGS ?= "{BOARD vcu118-rev2.0}" + +# Yocto FS-Boot variables +YAML_SERIAL_CONSOLE_STDIN:pn-fs-boot ?= "axi_uartlite_0" +YAML_SERIAL_CONSOLE_STDOUT:pn-fs-boot ?= "axi_uartlite_0" +YAML_MAIN_MEMORY_CONFIG:pn-fs-boot ?= "DDR4_0" +YAML_FLASH_MEMORY_CONFIG:pn-fs-boot ?= "axi_quad_spi_0" +XSCTH_PROC:pn-fs-boot ?= "microblaze_0" + +# Yocto KERNEL Variables +UBOOT_ENTRYPOINT ?= "0x80000000" +UBOOT_LOADADDRESS ?= "0x80000000" + +# vcu118-microblazeel Serial Console +SERIAL_CONSOLES ?= "115200;ttyUL0" +YAML_SERIAL_CONSOLE_BAUDRATE ?= "115200" + +# Set DDR Base address for u-boot-xlnx-scr variables +DDR_BASEADDR ?= "0x80000000" +SKIP_APPEND_BASEADDR ?= "0" + +# Required generic machine inclusion +require conf/machine/microblaze-generic.conf + +# This machine conf file uses vcu118-microblazeel xsa as reference input. +# User can override with vcu118 custom xsa using HDF_BASE and HDF_PATH variables +# from local.conf. +HDF_MACHINE = "vcu118-microblazeel" + +#### No additional settings should be after the Postamble +#### Postamble +PACKAGE_EXTRA_ARCHS:append = "${@['', ' vcu118_microblazeel']['vcu118-microblazeel' != '${MACHINE}']}" diff --git a/meta-xilinx-bsp/conf/machine/vek280-versal.conf b/meta-xilinx-bsp/conf/machine/vek280-versal.conf new file mode 100644 index 00000000..ffe2fcb7 --- /dev/null +++ b/meta-xilinx-bsp/conf/machine/vek280-versal.conf @@ -0,0 +1,55 @@ +XILINX_DEPRECATED[vek280-versal] = "${@'vek280-versal is not supported in 2023.2' if d.getVar("XILINX_RELEASE_VERSION") == 'v2023.2' else ''}" + +#@TYPE: Machine +#@NAME: vek280-versal +#@DESCRIPTION: Machine configuration for the VEK280 evaluation boards. + +#### Preamble +MACHINEOVERRIDES =. "${@['', 'vek280-versal:']['vek280-versal' !='${MACHINE}']}" +#### Regular settings follow + +# Variables that changes based on hw design or board specific requirement must be +# defined before calling the required inclusion file else pre-expansion value +# defined in versal-generic.conf will be set. + +# Yocto device-tree variables +YAML_CONSOLE_DEVICE_CONFIG:pn-device-tree ?= "CIPS_0_pspmc_0_psv_sbsauart_0" +YAML_DT_BOARD_FLAGS ?= "{BOARD versal-vek280-revb}" + +# Yocto arm-trusted-firmware(TF-A) variables +ATF_CONSOLE ?= "pl011" +TFA_BL33_LOAD ?= "0x8000000" + +# Yocto PLM variables +YAML_SERIAL_CONSOLE_STDIN:pn-plm-firmware ?= "CIPS_0_pspmc_0_psv_sbsauart_0" +YAML_SERIAL_CONSOLE_STDOUT:pn-plm-firmware ?= "CIPS_0_pspmc_0_psv_sbsauart_0" + +# Yocto KERNEL Variables +UBOOT_ENTRYPOINT ?= "0x200000" +UBOOT_LOADADDRESS ?= "0x200000" + +# vek280-versal Serial Console +SERIAL_CONSOLES ?= "115200;ttyAMA0" +YAML_SERIAL_CONSOLE_BAUDRATE ?= "115200" + +# Required generic machine inclusion +require conf/machine/versal-ai-edge-generic.conf + +# This machine conf file uses vek280-versal xsa as reference input. +# User can override with vek280 custom xsa using HDF_BASE and HDF_PATH variables +# from local.conf. +HDF_MACHINE = "vek280-versal" + +# VEK280 board has 12GB memory only but default versal-generic has QB_MEM set to +# 8G, Hence we need set 12G in QB_MEM. +QB_MEM = "-m 12G" + +QEMU_HW_DTB_PS = "${QEMU_HW_DTB_PATH}/board-versal-ps-vek280.dtb" +QEMU_HW_DTB_PMC = "${QEMU_HW_DTB_PATH}/board-versal-pmc-virt.dtb" + +# Yocto MACHINE_FEATURES Variable +MACHINE_FEATURES += "vdu" + +#### No additional settings should be after the Postamble +#### Postamble +PACKAGE_EXTRA_ARCHS:append = "${@['', ' vek280_versal']['vek280-versal' != '${MACHINE}']}" diff --git a/meta-xilinx-bsp/conf/machine/vmk180-versal.conf b/meta-xilinx-bsp/conf/machine/vmk180-versal.conf new file mode 100644 index 00000000..0f474f78 --- /dev/null +++ b/meta-xilinx-bsp/conf/machine/vmk180-versal.conf @@ -0,0 +1,45 @@ +#@TYPE: Machine +#@NAME: vmk180-versal +#@DESCRIPTION: Machine configuration for the VMK180 evaluation board. + +#### Preamble +MACHINEOVERRIDES =. "${@['', 'vmk180-versal:']['vmk180-versal' !='${MACHINE}']}" +#### Regular settings follow + +# Variables that changes based on hw design or board specific requirement must be +# defined before calling the required inclusion file else pre-expansion value +# defined in versal-generic.conf will be set. + +# Yocto device-tree variables +YAML_CONSOLE_DEVICE_CONFIG:pn-device-tree ?= "versal_cips_0_pspmc_0_psv_sbsauart_0" +YAML_DT_BOARD_FLAGS ?= "{BOARD versal-vmk180-reva-x-ebm-01-reva}" + +# Yocto arm-trusted-firmware(TF-A) variables +ATF_CONSOLE ?= "pl011" +TFA_BL33_LOAD ?= "0x8000000" + +# Yocto PLM variables +YAML_SERIAL_CONSOLE_STDIN:pn-plm-firmware ?= "versal_cips_0_pspmc_0_psv_sbsauart_0" +YAML_SERIAL_CONSOLE_STDOUT:pn-plm-firmware ?= "versal_cips_0_pspmc_0_psv_sbsauart_0" + +# Yocto KERNEL Variables +UBOOT_ENTRYPOINT ?= "0x200000" +UBOOT_LOADADDRESS ?= "0x200000" + +# vmk180-versal Serial Console +SERIAL_CONSOLES ?= "115200;ttyAMA0" +YAML_SERIAL_CONSOLE_BAUDRATE ?= "115200" + +# Required generic machine inclusion +# VMK180 board uses Versal Prime device hence use soc variant based generic +# machine inclusion +require conf/machine/versal-prime-generic.conf + +# This machine conf file uses vmk180-versal xsa as reference input. +# User can override with vmk180 custom xsa using HDF_BASE and HDF_PATH variables +# from local.conf. +HDF_MACHINE = "vmk180-versal" + +#### No additional settings should be after the Postamble +#### Postamble +PACKAGE_EXTRA_ARCHS:append = "${@['', ' vmk180_versal']['vmk180-versal' != '${MACHINE}']}" diff --git a/meta-xilinx-bsp/conf/machine/vpk120-versal.conf b/meta-xilinx-bsp/conf/machine/vpk120-versal.conf new file mode 100644 index 00000000..e200d42d --- /dev/null +++ b/meta-xilinx-bsp/conf/machine/vpk120-versal.conf @@ -0,0 +1,48 @@ +#@TYPE: Machine +#@NAME: vpk120-versal +#@DESCRIPTION: Machine configuration for the VPK120 evaluation board. + +#### Preamble +MACHINEOVERRIDES =. "${@['', 'vpk120-versal:']['vpk120-versal' !='${MACHINE}']}" +#### Regular settings follow + +# Variables that changes based on hw design or board specific requirement must be +# defined before calling the required inclusion file else pre-expansion value +# defined in versal-generic.conf will be set. + +# Yocto device-tree variables +YAML_CONSOLE_DEVICE_CONFIG:pn-device-tree ?= "versal_cips_0_pspmc_0_psv_sbsauart_0" +YAML_DT_BOARD_FLAGS ?= "{BOARD versal-vpk120-reva}" + +# Yocto arm-trusted-firmware(TF-A) variables +ATF_CONSOLE ?= "pl011" +TFA_BL33_LOAD ?= "0x8000000" + +# Yocto PLM variables +YAML_SERIAL_CONSOLE_STDIN:pn-plm-firmware ?= "versal_cips_0_pspmc_0_psv_sbsauart_0" +YAML_SERIAL_CONSOLE_STDOUT:pn-plm-firmware ?= "versal_cips_0_pspmc_0_psv_sbsauart_0" + +# Yocto KERNEL Variables +UBOOT_ENTRYPOINT ?= "0x200000" +UBOOT_LOADADDRESS ?= "0x200000" + +# vpk120-versal Serial Console +SERIAL_CONSOLES ?= "115200;ttyAMA0" +YAML_SERIAL_CONSOLE_BAUDRATE ?= "115200" + +# Required generic machine inclusion +# VPK120 board uses Versal Premium device hence use soc variant based generic +# machine inclusion +require conf/machine/versal-premium-generic.conf + +# This machine conf file uses vpk120-versal xsa as reference input. +# User can override with vpk120 custom xsa using HDF_BASE and HDF_PATH variables +# from local.conf. +HDF_MACHINE = "vpk120-versal" + +QEMU_HW_DTB_PS = "${QEMU_HW_DTB_PATH}/board-versal-ps-vpk120.dtb" +QEMU_HW_DTB_PMC = "${QEMU_HW_DTB_PATH}/board-versal-pmc-virt.dtb" + +#### No additional settings should be after the Postamble +#### Postamble +PACKAGE_EXTRA_ARCHS:append = "${@['', ' vpk120_versal']['vpk120-versal' != '${MACHINE}']}" diff --git a/meta-xilinx-bsp/conf/machine/vpk180-versal.conf b/meta-xilinx-bsp/conf/machine/vpk180-versal.conf new file mode 100644 index 00000000..92630e97 --- /dev/null +++ b/meta-xilinx-bsp/conf/machine/vpk180-versal.conf @@ -0,0 +1,48 @@ +#@TYPE: Machine +#@NAME: vpk180-versal +#@DESCRIPTION: Machine configuration for the VPK180 evaluation board. + +#### Preamble +MACHINEOVERRIDES =. "${@['', 'vpk180-versal:']['vpk180-versal' !='${MACHINE}']}" +#### Regular settings follow + +# Variables that changes based on hw design or board specific requirement must be +# defined before calling the required inclusion file else pre-expansion value +# defined in versal-generic.conf will be set. + +# Yocto device-tree variables +YAML_CONSOLE_DEVICE_CONFIG:pn-device-tree ?= "versal_cips_0_pspmc_0_psv_sbsauart_0" +YAML_DT_BOARD_FLAGS ?= "{BOARD versal-vpk180-reva}" + +# Yocto arm-trusted-firmware(TF-A) variables +ATF_CONSOLE ?= "pl011" +TFA_BL33_LOAD ?= "0x8000000" + +# Yocto PLM variables +YAML_SERIAL_CONSOLE_STDIN:pn-plm-firmware ?= "versal_cips_0_pspmc_0_psv_sbsauart_0" +YAML_SERIAL_CONSOLE_STDOUT:pn-plm-firmware ?= "versal_cips_0_pspmc_0_psv_sbsauart_0" + +# Yocto KERNEL Variables +UBOOT_ENTRYPOINT ?= "0x200000" +UBOOT_LOADADDRESS ?= "0x200000" + +# vpk180-versal Serial Console +SERIAL_CONSOLES ?= "115200;ttyAMA0" +YAML_SERIAL_CONSOLE_BAUDRATE ?= "115200" + +# Required generic machine inclusion +# VPK180 board uses Versal Premium device hence use soc variant based generic +# machine inclusion +require conf/machine/versal-premium-generic.conf + +# This machine conf file uses vpk180-versal xsa as reference input. +# User can override with vpk180 custom xsa using HDF_BASE and HDF_PATH variables +# from local.conf. +HDF_MACHINE = "vpk180-versal" + +QEMU_HW_DTB_PS = "${QEMU_HW_DTB_PATH}/board-versal-ps-vpk180.dtb" +QEMU_HW_DTB_PMC = "${QEMU_HW_DTB_PATH}/board-versal-pmc-virt.dtb" + +#### No additional settings should be after the Postamble +#### Postamble +PACKAGE_EXTRA_ARCHS:append = "${@['', ' vpk180_versal']['vpk180-versal' != '${MACHINE}']}" diff --git a/meta-xilinx-bsp/conf/machine/zc1254-zynqmp.conf b/meta-xilinx-bsp/conf/machine/zc1254-zynqmp.conf index 51dd2a9d..c3518577 100644 --- a/meta-xilinx-bsp/conf/machine/zc1254-zynqmp.conf +++ b/meta-xilinx-bsp/conf/machine/zc1254-zynqmp.conf @@ -3,36 +3,11 @@ #@DESCRIPTION: Machine support for ZC1254 Evaluation Board. # -SOC_VARIANT ?= "dr" +SOC_VARIANT = "dr" -require conf/machine/include/tune-zynqmp.inc -require conf/machine/include/machine-xilinx-overrides.inc -require conf/machine/include/machine-xilinx-default.inc +require conf/machine/zynqmp-generic.conf -MACHINE_FEATURES = "rtc ext2 ext3 vfat usbhost" - -UBOOT_MACHINE = "xilinx_zynqmp_zc1254_revA_defconfig" -SPL_BINARY ?= "spl/boot.bin" - -SERIAL_CONSOLE ?= "115200 ttyPS0" - -SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" +# Add board compatibility override +MACHINEOVERRIDES .= ":zc1254" KERNEL_DEVICETREE = "xilinx/zynqmp-zc1254-revA.dtb" - -PREFERRED_PROVIDER_virtual/kernel ?= "linux-xlnx" -PREFERRED_PROVIDER_virtual/bootloader ?= "u-boot-xlnx" - -PMU_FIRMWARE_IMAGE_NAME ?= "pmu-firmware-zynqmp-pmu" -PMU_FIRMWARE_DEPLOY_DIR ?= "${TOPDIR}/pmutmp/deploy/images/zynqmp-pmu" - -EXTRA_IMAGEDEPENDS += " \ - u-boot-zynq-uenv \ - arm-trusted-firmware \ - virtual/boot-bin \ - virtual/bootloader \ - " -IMAGE_BOOT_FILES += " \ - uEnv.txt \ - atf-uboot.ub \ - " diff --git a/meta-xilinx-bsp/conf/machine/zc1275-zynqmp.conf b/meta-xilinx-bsp/conf/machine/zc1275-zynqmp.conf deleted file mode 100644 index 1e5cd0d7..00000000 --- a/meta-xilinx-bsp/conf/machine/zc1275-zynqmp.conf +++ /dev/null @@ -1,38 +0,0 @@ -#@TYPE: Machine -#@NAME: zc1275-zynqmp -#@DESCRIPTION: Machine support for ZC1275 Evaluation Board. -# - -SOC_VARIANT ?= "dr" - -require conf/machine/include/tune-zynqmp.inc -require conf/machine/include/machine-xilinx-overrides.inc -require conf/machine/include/machine-xilinx-default.inc - -MACHINE_FEATURES = "rtc ext2 ext3 vfat usbhost" - -UBOOT_MACHINE = "xilinx_zynqmp_zc1275_revB_defconfig" -SPL_BINARY ?= "spl/boot.bin" - -SERIAL_CONSOLE ?= "115200 ttyPS0" - -SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" - -KERNEL_DEVICETREE = "xilinx/zynqmp-zc1275-revB.dtb" - -PREFERRED_PROVIDER_virtual/kernel ?= "linux-xlnx" -PREFERRED_PROVIDER_virtual/bootloader ?= "u-boot-xlnx" - -PMU_FIRMWARE_IMAGE_NAME ?= "pmu-firmware-zynqmp-pmu" -PMU_FIRMWARE_DEPLOY_DIR ?= "${TOPDIR}/pmutmp/deploy/images/zynqmp-pmu" - -EXTRA_IMAGEDEPENDS += " \ - u-boot-zynq-uenv \ - arm-trusted-firmware \ - virtual/boot-bin \ - virtual/bootloader \ - " -IMAGE_BOOT_FILES += " \ - uEnv.txt \ - atf-uboot.ub \ - " diff --git a/meta-xilinx-bsp/conf/machine/zc702-zynq7.conf b/meta-xilinx-bsp/conf/machine/zc702-zynq7.conf index fbd58a6e..1db0616f 100644 --- a/meta-xilinx-bsp/conf/machine/zc702-zynq7.conf +++ b/meta-xilinx-bsp/conf/machine/zc702-zynq7.conf @@ -1,50 +1,44 @@ #@TYPE: Machine #@NAME: zc702-zynq7 -#@DESCRIPTION: Machine support for ZC702 Evaluation Board. -# -# For details on the Evaluation board: -# http://www.xilinx.com/products/boards-and-kits/EK-Z7-ZC702-G.htm -# For documentation and design files for the ZC702: -# http://www.xilinx.com/support/index.html/content/xilinx/en/supportNav/boards_and_kits/zynq-7000_soc_boards_and_kits/zynq-7000_soc_zc702_evaluation_kit.html -# For the FSBL 'zynq_fsbl_0.elf' refer to UG873 and the associated design files. -# -SOC_VARIANT ?= "7z" - -require conf/machine/include/tune-zynq.inc -require conf/machine/include/machine-xilinx-overrides.inc -require conf/machine/include/machine-xilinx-default.inc -require conf/machine/include/machine-xilinx-qemu.inc - -MACHINE_FEATURES = "rtc ext2 ext3 vfat usbhost" - -# u-boot configuration -UBOOT_MACHINE = "zynq_zc702_config" -SPL_BINARY ?= "spl/boot.bin" - -EXTRA_IMAGEDEPENDS += " \ - u-boot-zynq-uenv \ - virtual/boot-bin \ - virtual/bootloader \ - " - -SERIAL_CONSOLE = "115200 ttyPS0" - -KERNEL_DEVICETREE = "zynq-zc702.dtb" - -IMAGE_BOOT_FILES += " \ - boot.bin \ - uEnv.txt \ - " - -# Although not fully supported you can run this machine on the mainline QEMU 'xilinx-zynq-a9' machine -IMAGE_CLASSES += "qemuboot" -QB_MEM = "-m 1024" -QB_MACHINE = "-machine xilinx-zynq-a9" -QB_OPT_APPEND = "-nographic -serial null -serial mon:stdio" -QB_NETWORK_DEVICE = "-net nic,netdev=net0,macaddr=@MAC@" - -# Xilinx's fork of QEMU has much better results, so let's default to that -# Use qemu-xilinx instead of mainline -PREFERRED_PROVIDER_qemu-helper-native = "qemu-xilinx-helper-native" - -IMAGE_CLASSES += "qemuboot-xilinx" +#@DESCRIPTION: Machine configuration for the ZC702 evaluation boards. + +#### Preamble +MACHINEOVERRIDES =. "${@['', 'zc702-zynq7:']['zc702-zynq7' !='${MACHINE}']}" +#### Regular settings follow + +# Variables that changes based on hw design or board specific requirement must be +# defined before calling the required inclusion file else pre-expansion value +# defined in zynq-generic.conf will be set. + +# Yocto device-tree variables +YAML_CONSOLE_DEVICE_CONFIG:pn-device-tree ?= "ps7_uart_1" +YAML_MAIN_MEMORY_CONFIG:pn-device-tree ?= "PS7_DDR_0" +YAML_DT_BOARD_FLAGS ?= "{BOARD zc702}" + +# Yocto FSBL variables +YAML_SERIAL_CONSOLE_STDIN:pn-fsbl-firmware ?= "ps7_uart_1" +YAML_SERIAL_CONSOLE_STDOUT:pn-fsbl-firmware ?= "ps7_uart_1" + +# Yocto KERNEL Variables +UBOOT_ENTRYPOINT ?= "0x200000" +UBOOT_LOADADDRESS ?= "0x200000" + +# zc702-zynq7 Serial Console +SERIAL_CONSOLES ?= "115200;ttyPS0" +YAML_SERIAL_CONSOLE_BAUDRATE ?= "115200" + +# Required generic machine inclusion +require conf/machine/zynq-generic.conf + +# This eval board machine conf file uses zc702-zynq7 xsa as reference input. +# User can override with zc702 custom xsa using HDF_BASE and HDF_PATH variables +# from local.conf. +HDF_MACHINE = "zc702-zynq7" + +# KERNEL_DEVICETREE is disabled as we use board device tree from DTG to match +# the xsa. User can enable explicitly if required from local.conf. +# KERNEL_DEVICETREE = "zynq-zc702.dtb" + +#### No additional settings should be after the Postamble +#### Postamble +PACKAGE_EXTRA_ARCHS:append = "${@['', ' zc702_zynq7']['zc702-zynq7' != '${MACHINE}']}" diff --git a/meta-xilinx-bsp/conf/machine/zc706-zynq7.conf b/meta-xilinx-bsp/conf/machine/zc706-zynq7.conf index 741ef5de..7e0525d1 100644 --- a/meta-xilinx-bsp/conf/machine/zc706-zynq7.conf +++ b/meta-xilinx-bsp/conf/machine/zc706-zynq7.conf @@ -1,51 +1,44 @@ #@TYPE: Machine #@NAME: zc706-zynq7 -#@DESCRIPTION: Machine support for ZC706 Evaluation Board. -# -# For details on the Evaluation board: -# http://www.xilinx.com/products/boards-and-kits/EK-Z7-ZC706-G.htm -# For documentation and design files for the ZC702: -# http://www.xilinx.com/support/index.html/content/xilinx/en/supportNav/boards_and_kits/zynq-7000_soc_boards_and_kits/zynq-7000_soc_zc706_evaluation_kit.html -# For the FSBL 'zynq_fsbl_0.elf' refer to UG873 and the associated design files. -# - -SOC_VARIANT ?= "7z" - -require conf/machine/include/tune-zynq.inc -require conf/machine/include/machine-xilinx-overrides.inc -require conf/machine/include/machine-xilinx-default.inc -require conf/machine/include/machine-xilinx-qemu.inc - -MACHINE_FEATURES = "rtc ext2 ext3 vfat usbhost usbgadget" - -# u-boot configuration -UBOOT_MACHINE = "zynq_zc706_config" -SPL_BINARY ?= "spl/boot.bin" - -EXTRA_IMAGEDEPENDS += " \ - u-boot-zynq-uenv \ - virtual/boot-bin \ - virtual/bootloader \ - " - -SERIAL_CONSOLE = "115200 ttyPS0" - -KERNEL_DEVICETREE = "zynq-zc706.dtb" - -IMAGE_BOOT_FILES += " \ - boot.bin \ - uEnv.txt \ - " - -# Although not fully supported you can run this machine on the mainline QEMU 'xilinx-zynq-a9' machine -IMAGE_CLASSES += "qemuboot" -QB_MEM = "-m 1024" -QB_MACHINE = "-machine xilinx-zynq-a9" -QB_OPT_APPEND = "-nographic -serial null -serial mon:stdio" -QB_NETWORK_DEVICE = "-net nic,netdev=net0,macaddr=@MAC@" - -# Xilinx's fork of QEMU has much better results, so let's default to that -# Use qemu-xilinx instead of mainline -PREFERRED_PROVIDER_qemu-helper-native = "qemu-xilinx-helper-native" - -IMAGE_CLASSES += "qemuboot-xilinx" +#@DESCRIPTION: Machine configuration for the ZC706 evaluation boards. + +#### Preamble +MACHINEOVERRIDES =. "${@['', 'zc706-zynq7:']['zc706-zynq7' !='${MACHINE}']}" +#### Regular settings follow + +# Variables that changes based on hw design or board specific requirement must be +# defined before calling the required inclusion file else pre-expansion value +# defined in zynq-generic.conf will be set. + +# Yocto device-tree variables +YAML_CONSOLE_DEVICE_CONFIG:pn-device-tree ?= "ps7_uart_1" +YAML_MAIN_MEMORY_CONFIG:pn-device-tree ?= "PS7_DDR_0" +YAML_DT_BOARD_FLAGS ?= "{BOARD zc706}" + +# Yocto FSBL variables +YAML_SERIAL_CONSOLE_STDIN:pn-fsbl-firmware ?= "ps7_uart_1" +YAML_SERIAL_CONSOLE_STDOUT:pn-fsbl-firmware ?= "ps7_uart_1" + +# Yocto KERNEL Variables +UBOOT_ENTRYPOINT ?= "0x200000" +UBOOT_LOADADDRESS ?= "0x200000" + +# zc706-zynq7 Serial Console +SERIAL_CONSOLES ?= "115200;ttyPS0" +YAML_SERIAL_CONSOLE_BAUDRATE ?= "115200" + +# Required generic machine inclusion +require conf/machine/zynq-generic.conf + +# This eval board machine conf file uses zc702-zynq7 xsa as reference input. +# User can override with zc702 custom xsa using HDF_BASE and HDF_PATH variables +# from local.conf. +HDF_MACHINE = "zc706-zynq7" + +# KERNEL_DEVICETREE is disabled as we use board device tree from DTG to match +# the xsa. User can enable explicitly if required from local.conf. +# KERNEL_DEVICETREE = "zynq-zc706.dtb" + +#### No additional settings should be after the Postamble +#### Postamble +PACKAGE_EXTRA_ARCHS:append = "${@['', ' zc706_zynq7']['zc706-zynq7' != '${MACHINE}']}" diff --git a/meta-xilinx-bsp/conf/machine/zcu102-zynqmp.conf b/meta-xilinx-bsp/conf/machine/zcu102-zynqmp.conf index 281110d9..acd2544a 100644 --- a/meta-xilinx-bsp/conf/machine/zcu102-zynqmp.conf +++ b/meta-xilinx-bsp/conf/machine/zcu102-zynqmp.conf @@ -1,85 +1,54 @@ #@TYPE: Machine #@NAME: zcu102-zynqmp -#@DESCRIPTION: Machine support for ZCU102 Evaluation Board. - -SOC_VARIANT ?= "eg" - -require conf/machine/include/tune-zynqmp.inc -require conf/machine/include/machine-xilinx-overrides.inc -require conf/machine/include/machine-xilinx-default.inc -require conf/machine/include/machine-xilinx-qemu.inc - -MACHINE_FEATURES = "rtc ext2 ext3 vfat usbhost" - -UBOOT_MACHINE = "xilinx_zynqmp_zcu102_rev1_0_defconfig" -SPL_BINARY ?= "spl/boot.bin" - -# Default SD image build onfiguration, use qemu-sd to pad -IMAGE_CLASSES += "image-types-xilinx-qemu" -IMAGE_FSTYPES += "wic.qemu-sd" -WKS_FILES ?= "sdimage-bootpart.wks" - -SERIAL_CONSOLE = "115200 ttyPS0" -SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" - -KERNEL_DEVICETREE = "xilinx/zynqmp-zcu102-rev1.0.dtb" - -PREFERRED_PROVIDER_virtual/kernel ?= "linux-xlnx" -PREFERRED_PROVIDER_virtual/bootloader ?= "u-boot-xlnx" - -EXTRA_IMAGEDEPENDS += " \ - u-boot-zynq-uenv \ - arm-trusted-firmware \ - qemu-devicetrees \ - virtual/boot-bin \ - virtual/bootloader \ - " - -IMAGE_BOOT_FILES += " \ - uEnv.txt \ - atf-uboot.ub \ - " - -# This machine has a QEMU model, runqemu setup: -IMAGE_CLASSES += "qemuboot-xilinx" -QB_MACHINE = "-machine xlnx-zcu102" -QB_MEM = "-m 4096" -QB_OPT_APPEND ?= "-nographic -serial mon:stdio -serial null" -QB_NETWORK_DEVICE = "-net nic -net nic -net nic -net nic,netdev=net0,macaddr=@MAC@" - -# Use qemu-xilinx instead of mainline -PREFERRED_PROVIDER_qemu-helper-native = "qemu-xilinx-helper-native" - -# Use the multiarch script instead of launching QEMU directly -QB_SYSTEM_NAME_append = "-multiarch" - -# Replicate BootROM like behaviour, having loaded SPL and PMU(ROM+FW) -QB_OPT_APPEND_append_qemuboot-xilinx = " \ - -hw-dtb ${DEPLOY_DIR_IMAGE}/qemu-hw-devicetrees/multiarch/zcu102-arm.dtb \ - ${@qemu_zynqmp_unhalt(d, True)} \ - -device loader,file=${DEPLOY_DIR_IMAGE}/arm-trusted-firmware.elf,cpu-num=0 \ - -device loader,file=${DEPLOY_DIR_IMAGE}/u-boot.elf \ - " - -# Attach the rootfs disk image to the second SD interface of QEMU (which is SD0) -QB_DEFAULT_FSTYPE_qemuboot-xilinx = "wic.qemu-sd" -QB_OPT_APPEND_append_qemuboot-xilinx = " -boot mode=5" -QB_ROOTFS_OPT_qemuboot-xilinx = " -drive if=sd,index=1,file=@ROOTFS@,format=raw" - -# PMU instance args -PMU_ROM ?= "${DEPLOY_DIR_IMAGE}/pmu-rom.elf" -PMU_FIRMWARE_DEPLOY_DIR ?= "${TOPDIR}/pmutmp/deploy/images/zynqmp-pmu" -PMU_FIRMWARE_IMAGE_NAME ?= "pmu-firmware-zynqmp-pmu" - -QB_PMU_OPT = " \ - -M microblaze-fdt \ - -display none \ - -hw-dtb ${DEPLOY_DIR_IMAGE}/qemu-hw-devicetrees/multiarch/zynqmp-pmu.dtb \ - -kernel ${PMU_ROM} \ - -device loader,file=${PMU_FIRMWARE_DEPLOY_DIR}/${PMU_FIRMWARE_IMAGE_NAME}.elf \ - -device loader,addr=0xfd1a0074,data=0x1011003,data-len=4 \ - -device loader,addr=0xfd1a007C,data=0x1010f03,data-len=4 \ - " -QB_OPT_APPEND_append_qemuboot-xilinx = " -pmu-args '${QB_PMU_OPT}'" - -do_write_qemuboot_conf[depends] += "u-boot-zynq-uenv:do_deploy" +#@DESCRIPTION: Machine configuration for the ZCU102 evaluation board. + +#### Preamble +MACHINEOVERRIDES =. "${@['', 'zcu102-zynqmp:']['zcu102-zynqmp' !='${MACHINE}']}" +#### Regular settings follow + +# Variables that changes based on hw design or board specific requirement must be +# defined before calling the required inclusion file else pre-expansion value +# defined in zynqmp-generic.conf will be set. + +# Yocto device-tree variables +YAML_CONSOLE_DEVICE_CONFIG:pn-device-tree ?= "psu_uart_0" +YAML_MAIN_MEMORY_CONFIG:pn-device-tree ?= "PSU_DDR_0" +YAML_DT_BOARD_FLAGS ?= "{BOARD zcu102-rev1.0}" + +# Yocto arm-trusted-firmware(TF-A) variables +ATF_CONSOLE ?= "cadence" +TFA_BL33_LOAD ?= "0x8000000" + +# Yocto PMUFW variables +YAML_SERIAL_CONSOLE_STDIN:pn-pmu-firmware ?= "psu_uart_0" +YAML_SERIAL_CONSOLE_STDOUT:pn-pmu-firmware ?= "psu_uart_0" + +# Yocto FSBL variables +YAML_SERIAL_CONSOLE_STDIN:pn-fsbl-firmware ?= "psu_uart_0" +YAML_SERIAL_CONSOLE_STDOUT:pn-fsbl-firmware ?= "psu_uart_0" + +# Yocto KERNEL Variables +UBOOT_ENTRYPOINT ?= "0x200000" +UBOOT_LOADADDRESS ?= "0x200000" + +# zcu102-zynqmp Serial Console +SERIAL_CONSOLES ?= "115200;ttyPS0" +YAML_SERIAL_CONSOLE_BAUDRATE ?= "115200" + +# Required generic machine inclusion +# ZCU102 board uses ZynqMP EG device hence use soc variant based generic machine +# inclusion +require conf/machine/zynqmp-eg-generic.conf + +# This eval board machine conf file uses zcu102-zynqmp xsa as reference input. +# User can override with zcu102 custom xsa using HDF_BASE and HDF_PATH variables +# from local.conf. +HDF_MACHINE = "zcu102-zynqmp" + +# KERNEL_DEVICETREE is disabled as we use board device tree from DTG to match +# the xsa. User can enable explicitly if required from local.conf. +# KERNEL_DEVICETREE = "xilinx/zynqmp-zcu102-rev1.0.dtb" + +#### No additional settings should be after the Postamble +#### Postamble +PACKAGE_EXTRA_ARCHS:append = "${@['', ' zcu102_zynqmp']['zcu102-zynqmp' != '${MACHINE}']}" diff --git a/meta-xilinx-bsp/conf/machine/zcu104-zynqmp.conf b/meta-xilinx-bsp/conf/machine/zcu104-zynqmp.conf index c4b4a032..b4c11f3a 100644 --- a/meta-xilinx-bsp/conf/machine/zcu104-zynqmp.conf +++ b/meta-xilinx-bsp/conf/machine/zcu104-zynqmp.conf @@ -1,41 +1,58 @@ #@TYPE: Machine #@NAME: zcu104-zynqmp -#@DESCRIPTION: Machine support for ZCU104 Evaluation Board. -# +#@DESCRIPTION: Machine configuration for the ZCU104 evaluation board. -SOC_VARIANT ?= "ev" +#### Preamble +MACHINEOVERRIDES =. "${@['', 'zcu104-zynqmp:']['zcu104-zynqmp' !='${MACHINE}']}" +#### Regular settings follow -require conf/machine/include/tune-zynqmp.inc -require conf/machine/include/machine-xilinx-overrides.inc -require conf/machine/include/machine-xilinx-default.inc +# Variables that changes based on hw design or board specific requirement must be +# defined before calling the required inclusion file else pre-expansion value +# defined in zynqmp-generic.conf will be set. -MACHINE_FEATURES = "rtc ext2 ext3 vfat usbhost" +# Yocto device-tree variables +YAML_CONSOLE_DEVICE_CONFIG:pn-device-tree ?= "psu_uart_0" +YAML_MAIN_MEMORY_CONFIG:pn-device-tree ?= "PSU_DDR_0" +YAML_DT_BOARD_FLAGS ?= "{BOARD zcu104-revc}" -UBOOT_MACHINE = "xilinx_zynqmp_zcu104_revC_defconfig" -SPL_BINARY ?= "spl/boot.bin" +# Yocto arm-trusted-firmware(TF-A) variables +ATF_CONSOLE ?= "cadence" +TFA_BL33_LOAD ?= "0x8000000" -SERIAL_CONSOLE ?= "115200 ttyPS0" +# Yocto PMUFW variables +YAML_SERIAL_CONSOLE_STDIN:pn-pmu-firmware ?= "psu_uart_0" +YAML_SERIAL_CONSOLE_STDOUT:pn-pmu-firmware ?= "psu_uart_0" -SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" +# Yocto FSBL variables +YAML_SERIAL_CONSOLE_STDIN:pn-fsbl-firmware ?= "psu_uart_0" +YAML_SERIAL_CONSOLE_STDOUT:pn-fsbl-firmware ?= "psu_uart_0" -KERNEL_DEVICETREE = "xilinx/zynqmp-zcu104-revC.dtb" +# Yocto KERNEL Variables +UBOOT_ENTRYPOINT ?= "0x200000" +UBOOT_LOADADDRESS ?= "0x200000" -PREFERRED_PROVIDER_virtual/kernel ?= "linux-xlnx" -PREFERRED_PROVIDER_virtual/bootloader ?= "u-boot-xlnx" +# zcu104-zynqmp Serial Console +SERIAL_CONSOLES ?= "115200;ttyPS0" +YAML_SERIAL_CONSOLE_BAUDRATE ?= "115200" -PMU_FIRMWARE_IMAGE_NAME ?= "pmu-firmware-zynqmp-pmu" -PMU_FIRMWARE_DEPLOY_DIR ?= "${TOPDIR}/pmutmp/deploy/images/zynqmp-pmu" +# Required generic machine inclusion +# ZCU104 board uses ZynqMP EV device hence use soc variant based generic machine +# inclusion +require conf/machine/zynqmp-ev-generic.conf -EXTRA_IMAGEDEPENDS += " \ - u-boot-zynq-uenv \ - arm-trusted-firmware \ - virtual/boot-bin \ - virtual/bootloader \ - " -IMAGE_BOOT_FILES += " \ - uEnv.txt \ - atf-uboot.ub \ - " +# This eval board machine conf file uses zcu104-zynqmp xsa as reference input. +# User can override with zcu104 custom xsa using HDF_BASE and HDF_PATH variables +# from local.conf. +HDF_MACHINE = "zcu104-zynqmp" +# KERNEL_DEVICETREE is disabled as we use board device tree from DTG to match +# the xsa. User can enable explicitly if required from local.conf. +# KERNEL_DEVICETREE = "xilinx/zynqmp-zcu104-revC.dtb" + +# Yocto IMAGE_FEATURES Variable MACHINE_HWCODECS = "libomxil-xlnx" +IMAGE_FEATURES += "hwcodecs" +#### No additional settings should be after the Postamble +#### Postamble +PACKAGE_EXTRA_ARCHS:append = "${@['', ' zcu104_zynqmp']['zcu104-zynqmp' != '${MACHINE}']}" diff --git a/meta-xilinx-bsp/conf/machine/zcu106-zynqmp.conf b/meta-xilinx-bsp/conf/machine/zcu106-zynqmp.conf index 136efb90..ff273134 100644 --- a/meta-xilinx-bsp/conf/machine/zcu106-zynqmp.conf +++ b/meta-xilinx-bsp/conf/machine/zcu106-zynqmp.conf @@ -1,39 +1,58 @@ #@TYPE: Machine #@NAME: zcu106-zynqmp -#@DESCRIPTION: Machine support for ZCU106 Evaluation Board. +#@DESCRIPTION: Machine configuration for the ZCU106 evaluation board. -SOC_VARIANT ?= "ev" +#### Preamble +MACHINEOVERRIDES =. "${@['', 'zcu106-zynqmp:']['zcu106-zynqmp' !='${MACHINE}']}" +#### Regular settings follow -require conf/machine/include/tune-zynqmp.inc -require conf/machine/include/machine-xilinx-overrides.inc -require conf/machine/include/machine-xilinx-default.inc +# Variables that changes based on hw design or board specific requirement must be +# defined before calling the required inclusion file else pre-expansion value +# defined in zynqmp-generic.conf will be set. -MACHINE_FEATURES = "rtc ext2 ext3 vfat usbhost" +# Yocto device-tree variables +YAML_CONSOLE_DEVICE_CONFIG:pn-device-tree ?= "psu_uart_0" +YAML_MAIN_MEMORY_CONFIG:pn-device-tree ?= "PSU_DDR_0" +YAML_DT_BOARD_FLAGS ?= "{BOARD zcu106-reva}" -UBOOT_MACHINE = "xilinx_zynqmp_zcu106_revA_defconfig" -SPL_BINARY ?= "spl/boot.bin" +# Yocto arm-trusted-firmware(TF-A) variables +ATF_CONSOLE ?= "cadence" +TFA_BL33_LOAD ?= "0x8000000" -SERIAL_CONSOLE = "115200 ttyPS0" -SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" +# Yocto PMUFW variables +YAML_SERIAL_CONSOLE_STDIN:pn-pmu-firmware ?= "psu_uart_0" +YAML_SERIAL_CONSOLE_STDOUT:pn-pmu-firmware ?= "psu_uart_0" -KERNEL_DEVICETREE = "xilinx/zynqmp-zcu106-revA.dtb" +# Yocto FSBL variables +YAML_SERIAL_CONSOLE_STDIN:pn-fsbl-firmware ?= "psu_uart_0" +YAML_SERIAL_CONSOLE_STDOUT:pn-fsbl-firmware ?= "psu_uart_0" -PREFERRED_PROVIDER_virtual/kernel ?= "linux-xlnx" -PREFERRED_PROVIDER_virtual/bootloader ?= "u-boot-xlnx" +# Yocto KERNEL Variables +UBOOT_ENTRYPOINT ?= "0x200000" +UBOOT_LOADADDRESS ?= "0x200000" -PMU_FIRMWARE_IMAGE_NAME ?= "pmu-firmware-zynqmp-pmu" -PMU_FIRMWARE_DEPLOY_DIR ?= "${TOPDIR}/pmutmp/deploy/images/zynqmp-pmu" +# zcu106-zynqmp Serial Console +SERIAL_CONSOLES ?= "115200;ttyPS0" +YAML_SERIAL_CONSOLE_BAUDRATE ?= "115200" -EXTRA_IMAGEDEPENDS += " \ - u-boot-zynq-uenv \ - arm-trusted-firmware \ - virtual/boot-bin \ - virtual/bootloader \ - " +# Required generic machine inclusion +# ZCU106 board uses ZynqMP EV device hence use soc variant based generic machine +# inclusion +require conf/machine/zynqmp-ev-generic.conf -IMAGE_BOOT_FILES += " \ - uEnv.txt \ - atf-uboot.ub \ - " +# This eval board machine conf file uses zcu106-zynqmp xsa as reference input. +# User can override with zcu106 custom xsa using HDF_BASE and HDF_PATH variables +# from local.conf. +HDF_MACHINE = "zcu106-zynqmp" +# KERNEL_DEVICETREE is disabled as we use board device tree from DTG to match +# the xsa. User can enable explicitly if required from local.conf. +# KERNEL_DEVICETREE = "xilinx/zynqmp-zcu106-revA.dtb" + +# Yocto IMAGE_FEATURES Variable MACHINE_HWCODECS = "libomxil-xlnx" +IMAGE_FEATURES += "hwcodecs" + +#### No additional settings should be after the Postamble +#### Postamble +PACKAGE_EXTRA_ARCHS:append = "${@['', ' zcu106_zynqmp']['zcu106-zynqmp' != '${MACHINE}']}" diff --git a/meta-xilinx-bsp/conf/machine/zcu111-zynqmp.conf b/meta-xilinx-bsp/conf/machine/zcu111-zynqmp.conf index 068e4890..77da93ca 100644 --- a/meta-xilinx-bsp/conf/machine/zcu111-zynqmp.conf +++ b/meta-xilinx-bsp/conf/machine/zcu111-zynqmp.conf @@ -1,38 +1,54 @@ #@TYPE: Machine #@NAME: zcu111-zynqmp -#@DESCRIPTION: Machine support for ZCU111 Evaluation Board. -# - -SOC_VARIANT ?= "dr" - -require conf/machine/include/tune-zynqmp.inc -require conf/machine/include/machine-xilinx-overrides.inc -require conf/machine/include/machine-xilinx-default.inc - -MACHINE_FEATURES = "rtc ext2 ext3 vfat usbhost" - -UBOOT_MACHINE = "xilinx_zynqmp_zcu111_revA_defconfig" -SPL_BINARY ?= "spl/boot.bin" - -SERIAL_CONSOLE ?= "115200 ttyPS0" - -SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" - -KERNEL_DEVICETREE = "xilinx/zynqmp-zcu111-revA.dtb" - -PREFERRED_PROVIDER_virtual/kernel ?= "linux-xlnx" -PREFERRED_PROVIDER_virtual/bootloader ?= "u-boot-xlnx" - -PMU_FIRMWARE_IMAGE_NAME ?= "pmu-firmware-zynqmp-pmu" -PMU_FIRMWARE_DEPLOY_DIR ?= "${TOPDIR}/pmutmp/deploy/images/zynqmp-pmu" - -EXTRA_IMAGEDEPENDS += " \ - u-boot-zynq-uenv \ - arm-trusted-firmware \ - virtual/boot-bin \ - virtual/bootloader \ - " -IMAGE_BOOT_FILES += " \ - uEnv.txt \ - atf-uboot.ub \ - " +#@DESCRIPTION: Machine configuration for the ZCU111 evaluation board. + +#### Preamble +MACHINEOVERRIDES =. "${@['', 'zcu111-zynqmp:']['zcu111-zynqmp' !='${MACHINE}']}" +#### Regular settings follow + +# Variables that changes based on hw design or board specific requirement must be +# defined before calling the required inclusion file else pre-expansion value +# defined in zynqmp-generic.conf will be set. + +# Yocto device-tree variables +YAML_CONSOLE_DEVICE_CONFIG:pn-device-tree ?= "psu_uart_0" +YAML_MAIN_MEMORY_CONFIG:pn-device-tree ?= "PSU_DDR_0" +YAML_DT_BOARD_FLAGS ?= "{BOARD zcu111-reva}" + +# Yocto arm-trusted-firmware(TF-A) variables +ATF_CONSOLE ?= "cadence" +TFA_BL33_LOAD ?= "0x8000000" + +# Yocto PMUFW variables +YAML_SERIAL_CONSOLE_STDIN:pn-pmu-firmware ?= "psu_uart_0" +YAML_SERIAL_CONSOLE_STDOUT:pn-pmu-firmware ?= "psu_uart_0" + +# Yocto FSBL variables +YAML_SERIAL_CONSOLE_STDIN:pn-fsbl-firmware ?= "psu_uart_0" +YAML_SERIAL_CONSOLE_STDOUT:pn-fsbl-firmware ?= "psu_uart_0" + +# Yocto KERNEL Variables +UBOOT_ENTRYPOINT ?= "0x200000" +UBOOT_LOADADDRESS ?= "0x200000" + +# zcu111-zynqmp Serial Console +SERIAL_CONSOLES ?= "115200;ttyPS0" +YAML_SERIAL_CONSOLE_BAUDRATE ?= "115200" + +# Required generic machine inclusion +# ZCU111 board uses ZynqMP DR device hence use soc variant based generic machine +# inclusion +require conf/machine/zynqmp-dr-generic.conf + +# This eval board machine conf file uses zcu111-zynqmp xsa as reference input. +# User can override with zcu111 custom xsa using HDF_BASE and HDF_PATH variables +# from local.conf. +HDF_MACHINE = "zcu111-zynqmp" + +# KERNEL_DEVICETREE is disabled as we use board device tree from DTG to match +# the xsa. User can enable explicitly if required from local.conf. +# KERNEL_DEVICETREE = "xilinx/zynqmp-zcu111-revA.dtb" + +#### No additional settings should be after the Postamble +#### Postamble +PACKAGE_EXTRA_ARCHS:append = "${@['', ' zcu111_zynqmp']['zcu111-zynqmp' != '${MACHINE}']}" diff --git a/meta-xilinx-bsp/conf/machine/zcu1275-zynqmp.conf b/meta-xilinx-bsp/conf/machine/zcu1275-zynqmp.conf new file mode 100644 index 00000000..18aa3eee --- /dev/null +++ b/meta-xilinx-bsp/conf/machine/zcu1275-zynqmp.conf @@ -0,0 +1,52 @@ +XILINX_DEPRECATED[zcu1275-zynqmp] = "${@'zcu1275-zynqmp is not supported in 2023.2' if d.getVar("XILINX_RELEASE_VERSION") == 'v2023.2' else ''}" + +#@TYPE: Machine +#@NAME: zcu1275-zynqmp +#@DESCRIPTION: Machine configuration for the ZCU1275 evaluation board. + +#### Preamble +MACHINEOVERRIDES =. "${@['', 'zcu1275-zynqmp:']['zcu1275-zynqmp' !='${MACHINE}']}" +#### Regular settings follow + +# Yocto device-tree variables +YAML_CONSOLE_DEVICE_CONFIG:pn-device-tree ?= "psu_uart_0" +YAML_MAIN_MEMORY_CONFIG:pn-device-tree ?= "PSU_DDR_0" +YAML_DT_BOARD_FLAGS ?= "{BOARD zcu1275-revb}" + +# Yocto arm-trusted-firmware(TF-A) variables +ATF_CONSOLE ?= "cadence" +TFA_BL33_LOAD ?= "0x8000000" + +# Yocto PMUFW variables +YAML_SERIAL_CONSOLE_STDIN:pn-pmu-firmware ?= "psu_uart_0" +YAML_SERIAL_CONSOLE_STDOUT:pn-pmu-firmware ?= "psu_uart_0" + +# Yocto FSBL variables +YAML_SERIAL_CONSOLE_STDIN:pn-fsbl-firmware ?= "psu_uart_0" +YAML_SERIAL_CONSOLE_STDOUT:pn-fsbl-firmware ?= "psu_uart_0" + +# Yocto KERNEL Variables +UBOOT_ENTRYPOINT ?= "0x200000" +UBOOT_LOADADDRESS ?= "0x200000" + +# zcu1275-zynqmp Serial Console +SERIAL_CONSOLES ?= "115200;ttyPS0" +YAML_SERIAL_CONSOLE_BAUDRATE ?= "115200" + +# Required generic machine inclusion +# ZCU1275 board uses ZynqMP DR device hence use soc variant based generic machine +# inclusion +require conf/machine/zynqmp-dr-generic.conf + +# This eval board machine conf file uses zcu1275-zynqmp xsa as reference input. +# User can override with zcu1275 custom xsa using HDF_BASE and HDF_PATH variables +# from local.conf. +HDF_MACHINE = "zcu1275-zynqmp" + +# KERNEL_DEVICETREE is disabled as we use board device tree from DTG to match +# the xsa. User can enable explicitly if required from local.conf. +# KERNEL_DEVICETREE = "xilinx/zynqmp-zcu1275-revB.dtb" + +#### No additional settings should be after the Postamble +#### Postamble +PACKAGE_EXTRA_ARCHS:append = "${@['', 'zcu1275_zynqmp']['zcu1275-zynqmp' != '${MACHINE}']}" diff --git a/meta-xilinx-bsp/conf/machine/zcu1285-zynqmp.conf b/meta-xilinx-bsp/conf/machine/zcu1285-zynqmp.conf index 04508540..6fba3619 100644 --- a/meta-xilinx-bsp/conf/machine/zcu1285-zynqmp.conf +++ b/meta-xilinx-bsp/conf/machine/zcu1285-zynqmp.conf @@ -1,38 +1,56 @@ +XILINX_DEPRECATED[zcu1285-zynqmp] = "${@'zcu1285-zynqmp is not supported in 2023.2' if d.getVar("XILINX_RELEASE_VERSION") == 'v2023.2' else ''}" + #@TYPE: Machine #@NAME: zcu1285-zynqmp -#@DESCRIPTION: Machine support for ZCU1285 Evaluation Board. -# - -SOC_VARIANT ?= "dr" - -require conf/machine/include/tune-zynqmp.inc -require conf/machine/include/machine-xilinx-overrides.inc -require conf/machine/include/machine-xilinx-default.inc - -MACHINE_FEATURES = "rtc ext2 ext3 vfat usbhost" - -UBOOT_MACHINE = "xilinx_zynqmp_zc1275_revB_defconfig" -SPL_BINARY ?= "spl/boot.bin" - -SERIAL_CONSOLE ?= "115200 ttyPS0" - -SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" - -KERNEL_DEVICETREE = "xilinx/zynqmp-zcu1285-revA.dtb" - -PREFERRED_PROVIDER_virtual/kernel ?= "linux-xlnx" -PREFERRED_PROVIDER_virtual/bootloader ?= "u-boot-xlnx" - -PMU_FIRMWARE_IMAGE_NAME ?= "pmu-firmware-zynqmp-pmu" -PMU_FIRMWARE_DEPLOY_DIR ?= "${TOPDIR}/pmutmp/deploy/images/zynqmp-pmu" - -EXTRA_IMAGEDEPENDS += " \ - u-boot-zynq-uenv \ - arm-trusted-firmware \ - virtual/boot-bin \ - virtual/bootloader \ - " -IMAGE_BOOT_FILES += " \ - uEnv.txt \ - atf-uboot.ub \ - " +#@DESCRIPTION: Machine configuration for the ZCU1285 evaluation board. + +#### Preamble +MACHINEOVERRIDES =. "${@['', 'zcu1285-zynqmp:']['zcu1285-zynqmp' !='${MACHINE}']}" +#### Regular settings follow + +# Variables that changes based on hw design or board specific requirement must be +# defined before calling the required inclusion file else pre-expansion value +# defined in zynqmp-generic.conf will be set. + +# Yocto device-tree variables +YAML_CONSOLE_DEVICE_CONFIG:pn-device-tree ?= "psu_uart_0" +YAML_MAIN_MEMORY_CONFIG:pn-device-tree ?= "PSU_DDR_0" +YAML_DT_BOARD_FLAGS ?= "{BOARD zcu1285-reva}" + +# Yocto arm-trusted-firmware(TF-A) variables +ATF_CONSOLE ?= "cadence" +TFA_BL33_LOAD ?= "0x8000000" + +# Yocto PMUFW variables +YAML_SERIAL_CONSOLE_STDIN:pn-pmu-firmware ?= "psu_uart_0" +YAML_SERIAL_CONSOLE_STDOUT:pn-pmu-firmware ?= "psu_uart_0" + +# Yocto FSBL variables +YAML_SERIAL_CONSOLE_STDIN:pn-fsbl-firmware ?= "psu_uart_0" +YAML_SERIAL_CONSOLE_STDOUT:pn-fsbl-firmware ?= "psu_uart_0" + +# Yocto KERNEL Variables +UBOOT_ENTRYPOINT ?= "0x200000" +UBOOT_LOADADDRESS ?= "0x200000" + +# zcu1285-zynqmp Serial Console +SERIAL_CONSOLES ?= "115200;ttyPS0" +YAML_SERIAL_CONSOLE_BAUDRATE ?= "115200" + +# Required generic machine inclusion +# ZCU1285 board uses ZynqMP DR device hence use soc variant based generic machine +# inclusion +require conf/machine/zynqmp-dr-generic.conf + +# This eval board machine conf file uses zcu1285-zynqmp xsa as reference input. +# User can override with zcu1285 custom xsa using HDF_BASE and HDF_PATH variables +# from local.conf. +HDF_MACHINE = "zcu1285-zynqmp" + +# KERNEL_DEVICETREE is disabled as we use board device tree from DTG to match +# the xsa. User can enable explicitly if required from local.conf. +# KERNEL_DEVICETREE = "xilinx/zynqmp-zcu1285-revA.dtb" + +#### No additional settings should be after the Postamble +#### Postamble +PACKAGE_EXTRA_ARCHS:append = "${@['', 'zcu1285_zynqmp']['zcu1285-zynqmp' != '${MACHINE}']}" diff --git a/meta-xilinx-bsp/conf/machine/zcu208-zynqmp.conf b/meta-xilinx-bsp/conf/machine/zcu208-zynqmp.conf new file mode 100644 index 00000000..7bb2c9db --- /dev/null +++ b/meta-xilinx-bsp/conf/machine/zcu208-zynqmp.conf @@ -0,0 +1,50 @@ +#@TYPE: Machine +#@NAME: zcu208-zynqmp +#@DESCRIPTION: Machine configuration for the ZCU208 evaluation board. + +#### Preamble +MACHINEOVERRIDES =. "${@['', 'zcu208-zynqmp:']['zcu208-zynqmp' !='${MACHINE}']}" +#### Regular settings follow + +# Variables that changes based on hw design or board specific requirement must be +# defined before calling the required inclusion file else pre-expansion value +# defined in zynqmp-generic.conf will be set. + +# Yocto device-tree variables +YAML_CONSOLE_DEVICE_CONFIG:pn-device-tree ?= "psu_uart_0" +YAML_MAIN_MEMORY_CONFIG:pn-device-tree ?= "PSU_DDR_0" +YAML_DT_BOARD_FLAGS ?= "{BOARD zcu208-reva}" + +# Yocto arm-trusted-firmware(TF-A) variables +ATF_CONSOLE ?= "cadence" +TFA_BL33_LOAD ?= "0x8000000" + +# Yocto PMUFW variables +YAML_SERIAL_CONSOLE_STDIN:pn-pmu-firmware ?= "psu_uart_0" +YAML_SERIAL_CONSOLE_STDOUT:pn-pmu-firmware ?= "psu_uart_0" + +# Yocto FSBL variables +YAML_SERIAL_CONSOLE_STDIN:pn-fsbl-firmware ?= "psu_uart_0" +YAML_SERIAL_CONSOLE_STDOUT:pn-fsbl-firmware ?= "psu_uart_0" + +# Yocto KERNEL Variables +UBOOT_ENTRYPOINT ?= "0x200000" +UBOOT_LOADADDRESS ?= "0x200000" + +# zcu208-zynqmp Serial Console +SERIAL_CONSOLES ?= "115200;ttyPS0" +YAML_SERIAL_CONSOLE_BAUDRATE ?= "115200" + +# Required generic machine inclusion +# ZCU208 board uses ZynqMP DR device hence use soc variant based generic machine +# inclusion +require conf/machine/zynqmp-dr-generic.conf + +# This eval board machine conf file uses zcu208-zynqmp xsa as reference input. +# User can override with zcu208 custom xsa using HDF_BASE and HDF_PATH variables +# from local.conf. +HDF_MACHINE = "zcu208-zynqmp" + +#### No additional settings should be after the Postamble +#### Postamble +PACKAGE_EXTRA_ARCHS:append = "${@['', ' zcu208_zynqmp']['zcu208-zynqmp' != '${MACHINE}']}" diff --git a/meta-xilinx-bsp/conf/machine/zcu216-zynqmp.conf b/meta-xilinx-bsp/conf/machine/zcu216-zynqmp.conf new file mode 100644 index 00000000..f4e1619d --- /dev/null +++ b/meta-xilinx-bsp/conf/machine/zcu216-zynqmp.conf @@ -0,0 +1,50 @@ +#@TYPE: Machine +#@NAME: zcu216-zynqmp +#@DESCRIPTION: Machine configuration for the ZCU216 evaluation board. + +#### Preamble +MACHINEOVERRIDES =. "${@['', 'zcu216-zynqmp:']['zcu216-zynqmp' !='${MACHINE}']}" +#### Regular settings follow + +# Variables that changes based on hw design or board specific requirement must be +# defined before calling the required inclusion file else pre-expansion value +# defined in zynqmp-generic.conf will be set. + +# Yocto device-tree variables +YAML_CONSOLE_DEVICE_CONFIG:pn-device-tree ?= "psu_uart_0" +YAML_MAIN_MEMORY_CONFIG:pn-device-tree ?= "PSU_DDR_0" +YAML_DT_BOARD_FLAGS ?= "{BOARD zcu216-reva}" + +# Yocto arm-trusted-firmware(TF-A) variables +ATF_CONSOLE ?= "cadence" +TFA_BL33_LOAD ?= "0x8000000" + +# Yocto PMUFW variables +YAML_SERIAL_CONSOLE_STDIN:pn-pmu-firmware ?= "psu_uart_0" +YAML_SERIAL_CONSOLE_STDOUT:pn-pmu-firmware ?= "psu_uart_0" + +# Yocto FSBL variables +YAML_SERIAL_CONSOLE_STDIN:pn-fsbl-firmware ?= "psu_uart_0" +YAML_SERIAL_CONSOLE_STDOUT:pn-fsbl-firmware ?= "psu_uart_0" + +# Yocto KERNEL Variables +UBOOT_ENTRYPOINT ?= "0x200000" +UBOOT_LOADADDRESS ?= "0x200000" + +# zcu216-zynqmp Serial Console +SERIAL_CONSOLES ?= "115200;ttyPS0" +YAML_SERIAL_CONSOLE_BAUDRATE ?= "115200" + +# Required generic machine inclusion +# ZCU216 board uses ZynqMP DR device hence use soc variant based generic machine +# inclusion +require conf/machine/zynqmp-dr-generic.conf + +# This eval board machine conf file uses zcu216-zynqmp xsa as reference input. +# User can override with zcu216 custom xsa using HDF_BASE and HDF_PATH variables +# from local.conf. +HDF_MACHINE = "zcu216-zynqmp" + +#### No additional settings should be after the Postamble +#### Postamble +PACKAGE_EXTRA_ARCHS:append = "${@['', ' zcu216_zynqmp']['zcu216-zynqmp' != '${MACHINE}']}" diff --git a/meta-xilinx-bsp/conf/machine/zedboard-zynq7.conf b/meta-xilinx-bsp/conf/machine/zedboard-zynq7.conf deleted file mode 100644 index 0b0a0de2..00000000 --- a/meta-xilinx-bsp/conf/machine/zedboard-zynq7.conf +++ /dev/null @@ -1,36 +0,0 @@ -#@TYPE: Machine -#@NAME: zedboard-zynq7 -#@DESCRIPTION: Machine support for ZedBoard. (http://www.zedboard.org/) -# -# For details on the Evaluation board: -# http://www.zedboard.org/content/overview -# For design files (including 'zynq_fsbl_0.elf') for the ZedBoard: -# http://www.zedboard.org/reference-designs-categories/zynq-concepts-tools-and-techniques-zedboard -# - -SOC_VARIANT ?= "7z" - -require conf/machine/include/tune-zynq.inc -require conf/machine/include/machine-xilinx-overrides.inc -require conf/machine/include/machine-xilinx-default.inc - -# u-boot configuration -UBOOT_MACHINE = "zynq_zed_config" -SPL_BINARY ?= "spl/boot.bin" -UBOOT_ELF_zynq = "u-boot" - -EXTRA_IMAGEDEPENDS += " \ - u-boot-zynq-uenv \ - virtual/boot-bin \ - virtual/bootloader \ - " - -SERIAL_CONSOLE = "115200 ttyPS0" - -KERNEL_DEVICETREE = "zynq-zed.dtb" - -IMAGE_BOOT_FILES += " \ - boot.bin \ - uEnv.txt \ - " - diff --git a/meta-xilinx-bsp/conf/machine/zybo-linux-bd-zynq7.conf b/meta-xilinx-bsp/conf/machine/zybo-linux-bd-zynq7.conf deleted file mode 100644 index 87634fcc..00000000 --- a/meta-xilinx-bsp/conf/machine/zybo-linux-bd-zynq7.conf +++ /dev/null @@ -1,43 +0,0 @@ -#@TYPE: Machine -#@NAME: zybo-linux-bd-zynq7 -#@DESCRIPTION: Machine support for zybo-linux-bd project. -# -# generated base on ZYBO linux-bd project -# - -SOC_VARIANT ?= "7z" - -require conf/machine/include/tune-zynq.inc -require conf/machine/include/machine-xilinx-overrides.inc -require conf/machine/include/machine-xilinx-default.inc - -PREFERRED_PROVIDER_virtual/kernel ?= "linux-xlnx" -PREFERRED_PROVIDER_virtual/bootloader ?= "u-boot" - -MACHINE_FEATURES = "ext2 vfat usbhost usbgadget keyboard screen alsa sdio" -SERIAL_CONSOLE = "115200 ttyPS0" - -MACHINE_ESSENTIAL_EXTRA_RDEPENDS += "device-tree" - -UBOOT_MACHINE = "zynq_zybo_config" -SPL_BINARY ?= "spl/boot.bin" -FORCE_PLATFORM_INIT = "1" -UBOOT_ELF_zynq = "u-boot" - -EXTRA_IMAGEDEPENDS += " \ - u-boot-zynq-uenv \ - virtual/boot-bin \ - virtual/bitstream \ - virtual/bootloader \ - " - -IMAGE_BOOT_FILES += " \ - boot.bin \ - bitstream \ - uEnv.txt \ - " - -KERNEL_FEATURES += " \ - bsp/zybo-linux-bd-zynq7/zybo-linux-bd-zynq7.scc \ - features/v4l2/v4l2-xilinx.scc \ - " diff --git a/meta-xilinx-bsp/conf/machine/zybo-zynq7.conf b/meta-xilinx-bsp/conf/machine/zybo-zynq7.conf deleted file mode 100644 index 732fa943..00000000 --- a/meta-xilinx-bsp/conf/machine/zybo-zynq7.conf +++ /dev/null @@ -1,37 +0,0 @@ -#@TYPE: Machine -#@NAME: zybo-zynq7 -#@DESCRIPTION: Machine support for ZYBO. -# -# For details on the ZYBO board: -# https://www.digilentinc.com/Products/Detail.cfm?Prod=ZYBO -# - -SOC_VARIANT ?= "7z" - -require conf/machine/include/tune-zynq.inc -require conf/machine/include/machine-xilinx-overrides.inc -require conf/machine/include/machine-xilinx-default.inc - -MACHINE_FEATURES = "ext2 vfat usbhost usbgadget" - -# u-boot configuration -PREFERRED_PROVIDER_virtual/bootloader = "u-boot" -UBOOT_MACHINE = "zynq_zybo_config" -SPL_BINARY ?= "spl/boot.bin" -UBOOT_ELF_zynq = "u-boot" - -EXTRA_IMAGEDEPENDS += " \ - u-boot-zynq-uenv \ - virtual/boot-bin \ - virtual/bootloader \ - " - -SERIAL_CONSOLE = "115200 ttyPS0" - -KERNEL_DEVICETREE = "zynq-zybo.dtb" - -IMAGE_BOOT_FILES += " \ - boot.bin \ - uEnv.txt \ - " - diff --git a/meta-xilinx-bsp/conf/machine/zynq-generic.conf b/meta-xilinx-bsp/conf/machine/zynq-generic.conf deleted file mode 100644 index 12fd1388..00000000 --- a/meta-xilinx-bsp/conf/machine/zynq-generic.conf +++ /dev/null @@ -1,11 +0,0 @@ -#@TYPE: Machine -#@NAME: -#@DESCRIPTION: zynq devices - -require conf/machine/include/tune-zynq.inc -require conf/machine/include/machine-xilinx-overrides.inc -require conf/machine/include/machine-xilinx-default.inc - -MACHINE_FEATURES = "rtc ext2 ext3 vfat usbhost usbgadget" - -EXTRA_IMAGEDEPENDS += "libyaml-native python3-cython-native python3-pyyaml-native" diff --git a/meta-xilinx-bsp/conf/machine/zynqmp-generic.conf b/meta-xilinx-bsp/conf/machine/zynqmp-generic.conf deleted file mode 100644 index 98385d25..00000000 --- a/meta-xilinx-bsp/conf/machine/zynqmp-generic.conf +++ /dev/null @@ -1,15 +0,0 @@ -#@TYPE: Machine -#@NAME: -#@DESCRIPTION: zynqmp devices - -require conf/machine/include/tune-zynqmp.inc -require conf/machine/include/machine-xilinx-overrides.inc -require conf/machine/include/machine-xilinx-default.inc -require conf/machine/include/machine-xilinx-qemu.inc - -MACHINE_FEATURES = "rtc ext2 ext3 vfat usbhost" - -PREFERRED_PROVIDER_qemu-helper-native = "qemu-xilinx-helper-native" - -EXTRA_IMAGEDEPENDS += "libyaml-native python3-cython-native python3-pyyaml-native" - diff --git a/meta-xilinx-bsp/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware.inc b/meta-xilinx-bsp/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware.inc deleted file mode 100644 index 785f915e..00000000 --- a/meta-xilinx-bsp/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware.inc +++ /dev/null @@ -1,93 +0,0 @@ -DESCRIPTION = "ARM Trusted Firmware" - -LICENSE = "BSD" -LIC_FILES_CHKSUM = "file://license.rst;md5=e927e02bca647e14efd87e9e914b2443" - -PROVIDES = "virtual/arm-trusted-firmware" - -inherit deploy - -DEPENDS += "u-boot-mkimage-native" - -S = "${WORKDIR}/git" -B = "${WORKDIR}/build" - -XILINX_RELEASE_VERSION ?= "" -ATF_VERSION ?= "2.0" -ATF_VERSION_EXTENSION ?= "-xilinx-${XILINX_RELEASE_VERSION}" -PV = "${ATF_VERSION}${ATF_VERSION_EXTENSION}+git${SRCPV}" - -BRANCH ?= "" -REPO ?= "git://github.com/Xilinx/arm-trusted-firmware.git;protocol=https" -BRANCHARG = "${@['nobranch=1', 'branch=${BRANCH}'][d.getVar('BRANCH', True) != '']}" -SRC_URI = "${REPO};${BRANCHARG}" - -ATF_BASE_NAME ?= "${PN}-${PKGE}-${PKGV}-${PKGR}-${DATETIME}" -ATF_BASE_NAME[vardepsexclude] = "DATETIME" - -COMPATIBLE_MACHINE ?= "^$" -COMPATIBLE_MACHINE_zynqmp = ".*" -COMPATIBLE_MACHINE_versal = ".*" - -PLATFORM_zynqmp = "zynqmp" -PLATFORM_versal = "versal" - -# requires CROSS_COMPILE set by hand as there is no configure script -export CROSS_COMPILE="${TARGET_PREFIX}" - -# Let the Makefile handle setting up the CFLAGS and LDFLAGS as it is a standalone application -CFLAGS[unexport] = "1" -LDFLAGS[unexport] = "1" -AS[unexport] = "1" -LD[unexport] = "1" - -ATF_CONSOLE ?= "" -ATF_CONSOLE_zynqmp = "cadence" -ATF_CONSOLE_versal ?= "pl011" - -DEBUG ?= "" -DEBUG_versal ?= "1" - -EXTRA_OEMAKE_zynqmp_append = "${@' ZYNQMP_CONSOLE=${ATF_CONSOLE}' if d.getVar('ATF_CONSOLE', True) != '' else ''}" -EXTRA_OEMAKE_append_versal = "${@' VERSAL_CONSOLE=${ATF_CONSOLE}' if d.getVar('ATF_CONSOLE', True) != '' else ''}" -EXTRA_OEMAKE_append = " ${@bb.utils.contains('DEBUG', '1', ' DEBUG=${DEBUG}', '', d)}" - -OUTPUT_DIR = "${@bb.utils.contains('DEBUG', '1', '${B}/${PLATFORM}/debug', '${B}/${PLATFORM}/release', d)}" - -ATF_MEM_BASE ?= "" -ATF_MEM_SIZE ?= "" - -EXTRA_OEMAKE_zynqmp_append = "${@' ZYNQMP_ATF_MEM_BASE=${ATF_MEM_BASE}' if d.getVar('ATF_MEM_BASE', True) != '' else ''}" -EXTRA_OEMAKE_zynqmp_append = "${@' ZYNQMP_ATF_MEM_SIZE=${ATF_MEM_SIZE}' if d.getVar('ATF_MEM_SIZE', True) != '' else ''}" - -EXTRA_OEMAKE_append_versal = "${@' VERSAL_ATF_MEM_BASE=${ATF_MEM_BASE}' if d.getVar('ATF_MEM_BASE', True) != '' else ''}" -EXTRA_OEMAKE_append_versal = "${@' VERSAL_ATF_MEM_SIZE=${ATF_MEM_SIZE}' if d.getVar('ATF_MEM_SIZE', True) != '' else ''}" - -do_configure() { - oe_runmake clean -C ${S} BUILD_BASE=${B} PLAT=${PLATFORM} -} - -do_compile() { - oe_runmake -C ${S} BUILD_BASE=${B} PLAT=${PLATFORM} RESET_TO_BL31=1 bl31 -} - -do_install() { - : -} - -do_deploy() { - install -d ${DEPLOYDIR} - install -m 0644 ${OUTPUT_DIR}/bl31/bl31.elf ${DEPLOYDIR}/${ATF_BASE_NAME}.elf - ln -sf ${ATF_BASE_NAME}.elf ${DEPLOYDIR}/${PN}.elf - install -m 0644 ${OUTPUT_DIR}/bl31.bin ${DEPLOYDIR}/${ATF_BASE_NAME}.bin - ln -sf ${ATF_BASE_NAME}.bin ${DEPLOYDIR}/${PN}.bin - - # Get the entry point address from the elf. - BL31_BASE_ADDR=$(${READELF} -h ${OUTPUT_DIR}/bl31/bl31.elf | egrep -m 1 -i "entry point.*?0x" | sed -r 's/.*?(0x.*?)/\1/g') - mkimage -A arm64 -O arm-trusted-firmware -T kernel -C none \ - -a $BL31_BASE_ADDR -e $BL31_BASE_ADDR \ - -d ${OUTPUT_DIR}/bl31.bin ${DEPLOYDIR}/${ATF_BASE_NAME}.ub - ln -sf ${ATF_BASE_NAME}.ub ${DEPLOYDIR}/${PN}.ub - ln -sf ${ATF_BASE_NAME}.ub ${DEPLOYDIR}/atf-uboot.ub -} -addtask deploy before do_build after do_compile diff --git a/meta-xilinx-bsp/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware_%.bbappend b/meta-xilinx-bsp/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware_%.bbappend new file mode 100644 index 00000000..c6c92fe7 --- /dev/null +++ b/meta-xilinx-bsp/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware_%.bbappend @@ -0,0 +1,2 @@ +EXTRA_OEMAKE:append:vc-p-a2197-00-versal =" VERSAL_PLATFORM=silicon" + diff --git a/meta-xilinx-bsp/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware_2019.1.bb b/meta-xilinx-bsp/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware_2019.1.bb deleted file mode 100644 index 64cbddc4..00000000 --- a/meta-xilinx-bsp/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware_2019.1.bb +++ /dev/null @@ -1,7 +0,0 @@ -ATF_VERSION = "2.0" -XILINX_RELEASE_VERSION = "v2019.1" -BRANCH ?= "master" -SRCREV ?= "80d1c79007fda42d4cc0be31b185a1da5799cd4d" - -include arm-trusted-firmware.inc - diff --git a/meta-xilinx-bsp/recipes-bsp/device-tree/device-tree.bb b/meta-xilinx-bsp/recipes-bsp/device-tree/device-tree.bb deleted file mode 100644 index 81965c13..00000000 --- a/meta-xilinx-bsp/recipes-bsp/device-tree/device-tree.bb +++ /dev/null @@ -1,39 +0,0 @@ -SUMMARY = "Xilinx BSP device trees" -DESCRIPTION = "Xilinx BSP device trees from within layer." -SECTION = "bsp" - -# the device trees from within the layer are licensed as MIT, kernel includes are GPL -LICENSE = "MIT & GPLv2" -LIC_FILES_CHKSUM = " \ - file://${COMMON_LICENSE_DIR}/MIT;md5=0835ade698e0bcf8506ecda2f7b4f302 \ - file://${COMMON_LICENSE_DIR}/GPL-2.0;md5=801f80980d171dd6425610833a22dbe6 \ - " - -inherit devicetree - -PROVIDES = "virtual/dtb" - -# common zynq include -SRC_URI_append_zynq = " file://zynq-7000-qspi-dummy.dtsi" - -# device tree sources for the various machines -COMPATIBLE_MACHINE_picozed-zynq7 = ".*" -SRC_URI_append_picozed-zynq7 = " file://picozed-zynq7.dts" - -COMPATIBLE_MACHINE_qemu-zynq7 = ".*" -SRC_URI_append_qemu-zynq7 = " file://qemu-zynq7.dts" - -COMPATIBLE_MACHINE_zybo-linux-bd-zynq7 = ".*" -SRC_URI_append_zybo-linux-bd-zynq7 = " \ - file://zybo-linux-bd-zynq7.dts \ - file://pcw.dtsi \ - file://pl.dtsi \ - " - -COMPATIBLE_MACHINE_kc705-microblazeel = ".*" -SRC_URI_append_kc705-microblazeel = " \ - file://kc705-microblazeel.dts \ - file://pl.dtsi \ - file://system-conf.dtsi \ - " - diff --git a/meta-xilinx-bsp/recipes-bsp/device-tree/device-tree.bbappend b/meta-xilinx-bsp/recipes-bsp/device-tree/device-tree.bbappend new file mode 100644 index 00000000..fa4816af --- /dev/null +++ b/meta-xilinx-bsp/recipes-bsp/device-tree/device-tree.bbappend @@ -0,0 +1,7 @@ +FILESEXTRAPATHS:prepend := "${THISDIR}/files:" + +# device tree sources for the various machines +COMPATIBLE_MACHINE:qemu-zynq7 = ".*" +SRC_URI:append:qemu-zynq7 = " file://qemu-zynq7.dts" + +EXTRA_OVERLAYS:append = "${@bb.utils.contains('MACHINE_FEATURES', 'provencore', ' pnc.dtsi', '', d)}" diff --git a/meta-xilinx-bsp/recipes-bsp/device-tree/files/kc705-microblazeel/kc705-microblazeel.dts b/meta-xilinx-bsp/recipes-bsp/device-tree/files/kc705-microblazeel/kc705-microblazeel.dts deleted file mode 100644 index 45e488c1..00000000 --- a/meta-xilinx-bsp/recipes-bsp/device-tree/files/kc705-microblazeel/kc705-microblazeel.dts +++ /dev/null @@ -1,56 +0,0 @@ -/dts-v1/; -/include/ "pl.dtsi" -/include/ "system-conf.dtsi" -/ { - hard-reset-gpios = <&reset_gpio 0 1>; - aliases { - ethernet0 = &axi_ethernet; - i2c0 = &iic_main; - serial0 = &rs232_uart; - }; - memory { - device_type = "memory"; - reg = <0x80000000 0x40000000>; - }; -}; - -&iic_main { - i2cswitch@74 { - compatible = "nxp,pca9548"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x74>; - i2c@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - si570: clock-generator@5d { - #clock-cells = <0>; - compatible = "silabs,si570"; - temperature-stability = <50>; - reg = <0x5d>; - factory-fout = <156250000>; - clock-frequency = <148500000>; - }; - }; - i2c@3 { - #address-cells = <1>; - #size-cells = <0>; - reg = <3>; - eeprom@54 { - compatible = "at,24c08"; - reg = <0x54>; - }; - }; - }; -}; - -&axi_ethernet { - phy-handle = <&phy0>; - axi_ethernet_mdio: mdio { - phy0: phy@7 { - device_type = "ethernet-phy"; - reg = <7>; - }; - }; -}; diff --git a/meta-xilinx-bsp/recipes-bsp/device-tree/files/kc705-microblazeel/pl.dtsi b/meta-xilinx-bsp/recipes-bsp/device-tree/files/kc705-microblazeel/pl.dtsi deleted file mode 100644 index 43bc2ab7..00000000 --- a/meta-xilinx-bsp/recipes-bsp/device-tree/files/kc705-microblazeel/pl.dtsi +++ /dev/null @@ -1,445 +0,0 @@ -/ { - #address-cells = <1>; - #size-cells = <1>; - compatible = "xlnx,microblaze"; - model = "Xilinx MicroBlaze"; - cpus { - #address-cells = <1>; - #cpus = <1>; - #size-cells = <0>; - microblaze_0: cpu@0 { - bus-handle = <&amba_pl>; - clock-frequency = <200000000>; - clocks = <&clk_cpu>; - compatible = "xlnx,microblaze-10.0"; - d-cache-baseaddr = <0x0000000080000000>; - d-cache-highaddr = <0x00000000bfffffff>; - d-cache-line-size = <0x20>; - d-cache-size = <0x4000>; - device_type = "cpu"; - i-cache-baseaddr = <0x0000000080000000>; - i-cache-highaddr = <0x00000000bfffffff>; - i-cache-line-size = <0x10>; - i-cache-size = <0x4000>; - interrupt-handle = <µblaze_0_axi_intc>; - model = "microblaze,10.0"; - timebase-frequency = <200000000>; - xlnx,addr-size = <0x20>; - xlnx,addr-tag-bits = <0x10>; - xlnx,allow-dcache-wr = <0x1>; - xlnx,allow-icache-wr = <0x1>; - xlnx,area-optimized = <0x0>; - xlnx,async-interrupt = <0x1>; - xlnx,async-wakeup = <0x3>; - xlnx,avoid-primitives = <0x0>; - xlnx,base-vectors = <0x0000000000000000>; - xlnx,branch-target-cache-size = <0x0>; - xlnx,cache-byte-size = <0x4000>; - xlnx,d-axi = <0x1>; - xlnx,d-lmb = <0x1>; - xlnx,d-lmb-mon = <0x0>; - xlnx,daddr-size = <0x20>; - xlnx,data-size = <0x20>; - xlnx,dc-axi-mon = <0x0>; - xlnx,dcache-addr-tag = <0x10>; - xlnx,dcache-always-used = <0x1>; - xlnx,dcache-byte-size = <0x4000>; - xlnx,dcache-data-width = <0x0>; - xlnx,dcache-force-tag-lutram = <0x0>; - xlnx,dcache-line-len = <0x8>; - xlnx,dcache-use-writeback = <0x0>; - xlnx,dcache-victims = <0x0>; - xlnx,debug-counter-width = <0x20>; - xlnx,debug-enabled = <0x1>; - xlnx,debug-event-counters = <0x5>; - xlnx,debug-external-trace = <0x0>; - xlnx,debug-interface = <0x0>; - xlnx,debug-latency-counters = <0x1>; - xlnx,debug-profile-size = <0x0>; - xlnx,debug-trace-async-reset = <0x0>; - xlnx,debug-trace-size = <0x2000>; - xlnx,div-zero-exception = <0x1>; - xlnx,dp-axi-mon = <0x0>; - xlnx,dynamic-bus-sizing = <0x0>; - xlnx,ecc-use-ce-exception = <0x0>; - xlnx,edge-is-positive = <0x1>; - xlnx,enable-discrete-ports = <0x0>; - xlnx,endianness = <0x1>; - xlnx,fault-tolerant = <0x0>; - xlnx,fpu-exception = <0x0>; - xlnx,freq = <0xbebc200>; - xlnx,fsl-exception = <0x0>; - xlnx,fsl-links = <0x0>; - xlnx,i-axi = <0x0>; - xlnx,i-lmb = <0x1>; - xlnx,i-lmb-mon = <0x0>; - xlnx,iaddr-size = <0x20>; - xlnx,ic-axi-mon = <0x0>; - xlnx,icache-always-used = <0x1>; - xlnx,icache-data-width = <0x0>; - xlnx,icache-force-tag-lutram = <0x0>; - xlnx,icache-line-len = <0x4>; - xlnx,icache-streams = <0x1>; - xlnx,icache-victims = <0x8>; - xlnx,ill-opcode-exception = <0x1>; - xlnx,imprecise-exceptions = <0x0>; - xlnx,instr-size = <0x20>; - xlnx,interconnect = <0x2>; - xlnx,interrupt-is-edge = <0x0>; - xlnx,interrupt-mon = <0x0>; - xlnx,ip-axi-mon = <0x0>; - xlnx,lockstep-master = <0x0>; - xlnx,lockstep-select = <0x0>; - xlnx,lockstep-slave = <0x0>; - xlnx,mmu-dtlb-size = <0x4>; - xlnx,mmu-itlb-size = <0x2>; - xlnx,mmu-privileged-instr = <0x0>; - xlnx,mmu-tlb-access = <0x3>; - xlnx,mmu-zones = <0x2>; - xlnx,num-sync-ff-clk = <0x2>; - xlnx,num-sync-ff-clk-debug = <0x2>; - xlnx,num-sync-ff-clk-irq = <0x1>; - xlnx,num-sync-ff-dbg-clk = <0x1>; - xlnx,num-sync-ff-dbg-trace-clk = <0x2>; - xlnx,number-of-pc-brk = <0x1>; - xlnx,number-of-rd-addr-brk = <0x0>; - xlnx,number-of-wr-addr-brk = <0x0>; - xlnx,opcode-0x0-illegal = <0x1>; - xlnx,optimization = <0x0>; - xlnx,pc-width = <0x20>; - xlnx,piaddr-size = <0x20>; - xlnx,pvr = <0x2>; - xlnx,pvr-user1 = <0x00>; - xlnx,pvr-user2 = <0x00000000>; - xlnx,reset-msr = <0x00000000>; - xlnx,reset-msr-bip = <0x0>; - xlnx,reset-msr-dce = <0x0>; - xlnx,reset-msr-ee = <0x0>; - xlnx,reset-msr-eip = <0x0>; - xlnx,reset-msr-ice = <0x0>; - xlnx,reset-msr-ie = <0x0>; - xlnx,sco = <0x0>; - xlnx,trace = <0x0>; - xlnx,unaligned-exceptions = <0x1>; - xlnx,use-barrel = <0x1>; - xlnx,use-branch-target-cache = <0x0>; - xlnx,use-config-reset = <0x0>; - xlnx,use-dcache = <0x1>; - xlnx,use-div = <0x1>; - xlnx,use-ext-brk = <0x0>; - xlnx,use-ext-nm-brk = <0x0>; - xlnx,use-extended-fsl-instr = <0x0>; - xlnx,use-fpu = <0x0>; - xlnx,use-hw-mul = <0x2>; - xlnx,use-icache = <0x1>; - xlnx,use-interrupt = <0x2>; - xlnx,use-mmu = <0x3>; - xlnx,use-msr-instr = <0x1>; - xlnx,use-non-secure = <0x0>; - xlnx,use-pcmp-instr = <0x1>; - xlnx,use-reorder-instr = <0x1>; - xlnx,use-stack-protection = <0x0>; - }; - }; - clocks { - #address-cells = <1>; - #size-cells = <0>; - clk_cpu: clk_cpu@0 { - #clock-cells = <0>; - clock-frequency = <200000000>; - clock-output-names = "clk_cpu"; - compatible = "fixed-clock"; - reg = <0>; - }; - clk_bus_0: clk_bus_0@1 { - #clock-cells = <0>; - clock-frequency = <200000000>; - clock-output-names = "clk_bus_0"; - compatible = "fixed-clock"; - reg = <1>; - }; - }; - amba_pl: amba_pl { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - ranges ; - axi_ethernet: ethernet@40c00000 { - axistream-connected = <&axi_ethernet_dma>; - axistream-control-connected = <&axi_ethernet_dma>; - clock-frequency = <100000000>; - compatible = "xlnx,axi-ethernet-1.00.a"; - device_type = "network"; - interrupt-parent = <µblaze_0_axi_intc>; - interrupts = <4 2>; - phy-mode = "gmii"; - reg = <0x40c00000 0x40000>; - xlnx = <0x0>; - xlnx,axiliteclkrate = <0x0>; - xlnx,axisclkrate = <0x0>; - xlnx,clockselection = <0x0>; - xlnx,enableasyncsgmii = <0x0>; - xlnx,gt-type = <0x0>; - xlnx,gtinex = <0x0>; - xlnx,gtlocation = <0x0>; - xlnx,gtrefclksrc = <0x0>; - xlnx,include-dre ; - xlnx,instantiatebitslice0 = <0x0>; - xlnx,phy-type = <0x1>; - xlnx,phyaddr = <0x1>; - xlnx,rable = <0x0>; - xlnx,rxcsum = <0x0>; - xlnx,rxlane0-placement = <0x0>; - xlnx,rxlane1-placement = <0x0>; - xlnx,rxmem = <0x1000>; - xlnx,rxnibblebitslice0used = <0x0>; - xlnx,tx-in-upper-nibble = <0x1>; - xlnx,txcsum = <0x0>; - xlnx,txlane0-placement = <0x0>; - xlnx,txlane1-placement = <0x0>; - axi_ethernet_mdio: mdio { - #address-cells = <1>; - #size-cells = <0>; - }; - }; - axi_ethernet_dma: dma@41e00000 { - #dma-cells = <1>; - axistream-connected = <&axi_ethernet>; - axistream-control-connected = <&axi_ethernet>; - clock-frequency = <200000000>; - clock-names = "s_axi_lite_aclk"; - clocks = <&clk_bus_0>; - compatible = "xlnx,eth-dma"; - interrupt-parent = <µblaze_0_axi_intc>; - interrupts = <3 2 2 2>; - reg = <0x41e00000 0x10000>; - xlnx,include-dre ; - }; - axi_timer_0: timer@41c00000 { - clock-frequency = <200000000>; - clocks = <&clk_bus_0>; - compatible = "xlnx,xps-timer-1.00.a"; - interrupt-parent = <µblaze_0_axi_intc>; - interrupts = <5 2>; - reg = <0x41c00000 0x10000>; - xlnx,count-width = <0x20>; - xlnx,gen0-assert = <0x1>; - xlnx,gen1-assert = <0x1>; - xlnx,one-timer-only = <0x0>; - xlnx,trig0-assert = <0x1>; - xlnx,trig1-assert = <0x1>; - }; - calib_complete_gpio: gpio@40010000 { - #gpio-cells = <2>; - compatible = "xlnx,xps-gpio-1.00.a"; - gpio-controller ; - reg = <0x40010000 0x10000>; - xlnx,all-inputs = <0x1>; - xlnx,all-inputs-2 = <0x0>; - xlnx,all-outputs = <0x0>; - xlnx,all-outputs-2 = <0x0>; - xlnx,dout-default = <0x00000000>; - xlnx,dout-default-2 = <0x00000000>; - xlnx,gpio-width = <0x1>; - xlnx,gpio2-width = <0x20>; - xlnx,interrupt-present = <0x0>; - xlnx,is-dual = <0x0>; - xlnx,tri-default = <0xFFFFFFFF>; - xlnx,tri-default-2 = <0xFFFFFFFF>; - }; - dip_switches_4bits: gpio@40020000 { - #gpio-cells = <2>; - compatible = "xlnx,xps-gpio-1.00.a"; - gpio-controller ; - reg = <0x40020000 0x10000>; - xlnx,all-inputs = <0x1>; - xlnx,all-inputs-2 = <0x0>; - xlnx,all-outputs = <0x0>; - xlnx,all-outputs-2 = <0x0>; - xlnx,dout-default = <0x00000000>; - xlnx,dout-default-2 = <0x00000000>; - xlnx,gpio-width = <0x4>; - xlnx,gpio2-width = <0x20>; - xlnx,interrupt-present = <0x0>; - xlnx,is-dual = <0x0>; - xlnx,tri-default = <0xFFFFFFFF>; - xlnx,tri-default-2 = <0xFFFFFFFF>; - }; - iic_main: i2c@40800000 { - #address-cells = <1>; - #size-cells = <0>; - clock-frequency = <200000000>; - clocks = <&clk_bus_0>; - compatible = "xlnx,xps-iic-2.00.a"; - interrupt-parent = <µblaze_0_axi_intc>; - interrupts = <1 2>; - reg = <0x40800000 0x10000>; - }; - led_8bits: gpio@40030000 { - #gpio-cells = <2>; - compatible = "xlnx,xps-gpio-1.00.a"; - gpio-controller ; - reg = <0x40030000 0x10000>; - xlnx,all-inputs = <0x0>; - xlnx,all-inputs-2 = <0x0>; - xlnx,all-outputs = <0x1>; - xlnx,all-outputs-2 = <0x0>; - xlnx,dout-default = <0x00000000>; - xlnx,dout-default-2 = <0x00000000>; - xlnx,gpio-width = <0x8>; - xlnx,gpio2-width = <0x20>; - xlnx,interrupt-present = <0x0>; - xlnx,is-dual = <0x0>; - xlnx,tri-default = <0xFFFFFFFF>; - xlnx,tri-default-2 = <0xFFFFFFFF>; - }; - linear_flash: flash@60000000 { - bank-width = <2>; - compatible = "cfi-flash"; - reg = <0x60000000 0x8000000>; - xlnx,axi-clk-period-ps = <0x1388>; - xlnx,include-datawidth-matching-0 = <0x1>; - xlnx,include-datawidth-matching-1 = <0x1>; - xlnx,include-datawidth-matching-2 = <0x1>; - xlnx,include-datawidth-matching-3 = <0x1>; - xlnx,include-negedge-ioregs = <0x0>; - xlnx,lflash-period-ps = <0x1388>; - xlnx,linear-flash-sync-burst = <0x0>; - xlnx,max-mem-width = <0x10>; - xlnx,mem-a-lsb = <0x0>; - xlnx,mem-a-msb = <0x1f>; - xlnx,mem0-type = <0x2>; - xlnx,mem0-width = <0x10>; - xlnx,mem1-type = <0x0>; - xlnx,mem1-width = <0x10>; - xlnx,mem2-type = <0x0>; - xlnx,mem2-width = <0x10>; - xlnx,mem3-type = <0x0>; - xlnx,mem3-width = <0x10>; - xlnx,num-banks-mem = <0x1>; - xlnx,page-size = <0x10>; - xlnx,parity-type-mem-0 = <0x0>; - xlnx,parity-type-mem-1 = <0x0>; - xlnx,parity-type-mem-2 = <0x0>; - xlnx,parity-type-mem-3 = <0x0>; - xlnx,port-diff = <0x0>; - xlnx,s-axi-en-reg = <0x0>; - xlnx,s-axi-mem-addr-width = <0x20>; - xlnx,s-axi-mem-data-width = <0x20>; - xlnx,s-axi-mem-id-width = <0x1>; - xlnx,s-axi-reg-addr-width = <0x5>; - xlnx,s-axi-reg-data-width = <0x20>; - xlnx,synch-pipedelay-0 = <0x1>; - xlnx,synch-pipedelay-1 = <0x1>; - xlnx,synch-pipedelay-2 = <0x1>; - xlnx,synch-pipedelay-3 = <0x1>; - xlnx,tavdv-ps-mem-0 = <0x1fbd0>; - xlnx,tavdv-ps-mem-1 = <0x3a98>; - xlnx,tavdv-ps-mem-2 = <0x3a98>; - xlnx,tavdv-ps-mem-3 = <0x3a98>; - xlnx,tcedv-ps-mem-0 = <0x1fbd0>; - xlnx,tcedv-ps-mem-1 = <0x3a98>; - xlnx,tcedv-ps-mem-2 = <0x3a98>; - xlnx,tcedv-ps-mem-3 = <0x3a98>; - xlnx,thzce-ps-mem-0 = <0x88b8>; - xlnx,thzce-ps-mem-1 = <0x1b58>; - xlnx,thzce-ps-mem-2 = <0x1b58>; - xlnx,thzce-ps-mem-3 = <0x1b58>; - xlnx,thzoe-ps-mem-0 = <0x1b58>; - xlnx,thzoe-ps-mem-1 = <0x1b58>; - xlnx,thzoe-ps-mem-2 = <0x1b58>; - xlnx,thzoe-ps-mem-3 = <0x1b58>; - xlnx,tlzwe-ps-mem-0 = <0xc350>; - xlnx,tlzwe-ps-mem-1 = <0x0>; - xlnx,tlzwe-ps-mem-2 = <0x0>; - xlnx,tlzwe-ps-mem-3 = <0x0>; - xlnx,tpacc-ps-flash-0 = <0x61a8>; - xlnx,tpacc-ps-flash-1 = <0x61a8>; - xlnx,tpacc-ps-flash-2 = <0x61a8>; - xlnx,tpacc-ps-flash-3 = <0x61a8>; - xlnx,twc-ps-mem-0 = <0x11170>; - xlnx,twc-ps-mem-1 = <0x3a98>; - xlnx,twc-ps-mem-2 = <0x3a98>; - xlnx,twc-ps-mem-3 = <0x3a98>; - xlnx,twp-ps-mem-0 = <0x13880>; - xlnx,twp-ps-mem-1 = <0x2ee0>; - xlnx,twp-ps-mem-2 = <0x2ee0>; - xlnx,twp-ps-mem-3 = <0x2ee0>; - xlnx,twph-ps-mem-0 = <0x13880>; - xlnx,twph-ps-mem-1 = <0x2ee0>; - xlnx,twph-ps-mem-2 = <0x2ee0>; - xlnx,twph-ps-mem-3 = <0x2ee0>; - xlnx,use-startup = <0x0>; - xlnx,use-startup-int = <0x0>; - xlnx,wr-rec-time-mem-0 = <0x186a0>; - xlnx,wr-rec-time-mem-1 = <0x6978>; - xlnx,wr-rec-time-mem-2 = <0x6978>; - xlnx,wr-rec-time-mem-3 = <0x6978>; - }; - microblaze_0_axi_intc: interrupt-controller@41200000 { - #interrupt-cells = <2>; - compatible = "xlnx,xps-intc-1.00.a"; - interrupt-controller ; - reg = <0x41200000 0x10000>; - xlnx,kind-of-intr = <0x0>; - xlnx,num-intr-inputs = <0x6>; - }; - push_buttons_5bits: gpio@40040000 { - #gpio-cells = <2>; - compatible = "xlnx,xps-gpio-1.00.a"; - gpio-controller ; - reg = <0x40040000 0x10000>; - xlnx,all-inputs = <0x1>; - xlnx,all-inputs-2 = <0x0>; - xlnx,all-outputs = <0x0>; - xlnx,all-outputs-2 = <0x0>; - xlnx,dout-default = <0x00000000>; - xlnx,dout-default-2 = <0x00000000>; - xlnx,gpio-width = <0x5>; - xlnx,gpio2-width = <0x20>; - xlnx,interrupt-present = <0x0>; - xlnx,is-dual = <0x0>; - xlnx,tri-default = <0xFFFFFFFF>; - xlnx,tri-default-2 = <0xFFFFFFFF>; - }; - reset_gpio: gpio@40000000 { - #gpio-cells = <2>; - compatible = "xlnx,xps-gpio-1.00.a"; - gpio-controller ; - reg = <0x40000000 0x10000>; - xlnx,all-inputs = <0x0>; - xlnx,all-inputs-2 = <0x0>; - xlnx,all-outputs = <0x1>; - xlnx,all-outputs-2 = <0x0>; - xlnx,dout-default = <0x00000000>; - xlnx,dout-default-2 = <0x00000000>; - xlnx,gpio-width = <0x1>; - xlnx,gpio2-width = <0x20>; - xlnx,interrupt-present = <0x0>; - xlnx,is-dual = <0x0>; - xlnx,tri-default = <0xFFFFFFFF>; - xlnx,tri-default-2 = <0xFFFFFFFF>; - }; - rs232_uart: serial@44a00000 { - clock-frequency = <200000000>; - clocks = <&clk_bus_0>; - compatible = "xlnx,xps-uart16550-2.00.a", "ns16550a"; - current-speed = <115200>; - device_type = "serial"; - interrupt-parent = <µblaze_0_axi_intc>; - interrupts = <0 2>; - port-number = <0>; - reg = <0x44a00000 0x10000>; - reg-offset = <0x1000>; - reg-shift = <2>; - xlnx,external-xin-clk-hz = <0x17d7840>; - xlnx,external-xin-clk-hz-d = <0x19>; - xlnx,has-external-rclk = <0x0>; - xlnx,has-external-xin = <0x0>; - xlnx,is-a-16550 = <0x1>; - xlnx,s-axi-aclk-freq-hz-d = "200.0"; - xlnx,use-modem-ports = <0x1>; - xlnx,use-user-ports = <0x1>; - }; - }; -}; diff --git a/meta-xilinx-bsp/recipes-bsp/device-tree/files/kc705-microblazeel/system-conf.dtsi b/meta-xilinx-bsp/recipes-bsp/device-tree/files/kc705-microblazeel/system-conf.dtsi deleted file mode 100644 index 09b26c6a..00000000 --- a/meta-xilinx-bsp/recipes-bsp/device-tree/files/kc705-microblazeel/system-conf.dtsi +++ /dev/null @@ -1,43 +0,0 @@ -/* - * CAUTION: This file is automatically generated by PetaLinux SDK. - * DO NOT modify this file - */ - - -/ { - chosen { - bootargs = "console=ttyS0,115200 earlyprintk"; - stdout-path = "serial0:115200n8"; - }; -}; - -&axi_ethernet { - local-mac-address = [00 0a 35 00 22 01]; -}; - -&linear_flash { - reg = <0x60000000 0x08000000>; - #address-cells = <1>; - #size-cells = <1>; - partition@0x00000000 { - label = "fpga"; - reg = <0x00000000 0x00b00000>; - }; - partition@0x00b00000 { - label = "boot"; - reg = <0x00b00000 0x00080000>; - }; - partition@0x00b80000 { - label = "bootenv"; - reg = <0x00b80000 0x00020000>; - }; - partition@0x00ba0000 { - label = "kernel"; - reg = <0x00ba0000 0x00c00000>; - }; - partition@0x017a0000 { - label = "spare"; - reg = <0x017a0000 0x00000000>; - }; -}; - diff --git a/meta-xilinx-bsp/recipes-bsp/device-tree/files/picozed-zynq7.dts b/meta-xilinx-bsp/recipes-bsp/device-tree/files/picozed-zynq7.dts deleted file mode 100644 index 4ec64f5e..00000000 --- a/meta-xilinx-bsp/recipes-bsp/device-tree/files/picozed-zynq7.dts +++ /dev/null @@ -1,98 +0,0 @@ -/dts-v1/; -/include/ "zynq-7000.dtsi" -/include/ "zynq-7000-qspi-dummy.dtsi" - -/ { - model = "Avnet picoZed"; - compatible = "avnet,picozed", "xlnx,zynq-7000"; - - aliases { - ethernet0 = &gem0; - serial0 = &uart1; - }; - - memory { - device_type = "memory"; - reg = <0x0 0x40000000>; - }; - - chosen { - bootargs = "earlyprintk"; - stdout-path = "serial0:115200n8"; - }; - - usb_phy0: phy0 { - compatible = "usb-nop-xceiv"; - #phy-cells = <0>; - reset-gpios = <&gpio0 7 1>; /* MIO 7, GPIO_ACTIVE_LOW */ - }; -}; - -&gem0 { - status = "okay"; - phy-mode = "rgmii-id"; - phy-handle = <ðernet_phy>; - - ethernet_phy: ethernet-phy@0 { - compatible = "marvell,88e1512"; - device_type = "ethernet-phy"; - reg = <0>; - }; -}; - -&sdhci1 { - status = "okay"; - /* SD1 is onnected to a non-removable eMMC flash device */ - non-removable; -}; - -&uart1 { - status = "okay"; -}; - -&usb0 { - status = "okay"; - dr_mode = "host"; - usb-phy = <&usb_phy0>; -}; - -&qspi { - status = "okay"; - primary_flash: ps7-qspi@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "micron,m25p80", "spansion,s25fl128s", "jedec,spi-nor"; - reg = <0x0>; - spi-max-frequency = <50000000>; - /* Example 16M partition table using U-Boot + U-Boot SPL */ - partition@0x0 { - label = "boot"; - reg = <0x0 0xe0000>; - }; - partition@0xe0000 { - label = "ubootenv"; - reg = <0xe0000 0x20000>; - }; - partition@0x100000 { - label = "uboot"; - reg = <0x100000 0x100000>; - }; - partition@0x200000 { - label = "kernel"; - reg = <0x200000 0x4f0000>; - }; - partition@0x6f0000 { - label = "devicetree"; - reg = <0x6f0000 0x10000>; - }; - partition@0x700000 { - label = "rootfs"; - reg = <0x700000 0x400000>; - }; - partition@0xb00000 { - label = "spare"; - reg = <0xb00000 0x500000>; - }; - }; -}; - diff --git a/meta-xilinx-bsp/recipes-bsp/device-tree/files/pnc.dtsi b/meta-xilinx-bsp/recipes-bsp/device-tree/files/pnc.dtsi new file mode 100644 index 00000000..760b76be --- /dev/null +++ b/meta-xilinx-bsp/recipes-bsp/device-tree/files/pnc.dtsi @@ -0,0 +1,13 @@ +/ { + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + pnc-reserved-memory@70000000{ + compatible = "pnc,secure-memory"; + reg = <0x0 0x70000000 0x0 0x0FF00000>; + no-map; + }; + }; +}; diff --git a/meta-xilinx-bsp/recipes-bsp/device-tree/files/zybo-linux-bd-zynq7/pcw.dtsi b/meta-xilinx-bsp/recipes-bsp/device-tree/files/zybo-linux-bd-zynq7/pcw.dtsi deleted file mode 100644 index 0f678d39..00000000 --- a/meta-xilinx-bsp/recipes-bsp/device-tree/files/zybo-linux-bd-zynq7/pcw.dtsi +++ /dev/null @@ -1,63 +0,0 @@ -/* - * CAUTION: This file is automatically generated by Xilinx. - * Version: HSI 2015.4 - * Today is: Fri Mar 4 15:40:49 2016 -*/ - - -/ { - cpus { - cpu@0 { - operating-points = <650000 1000000 325000 1000000>; - }; - }; -}; -&gem0 { - phy-mode = "rgmii-id"; - status = "okay"; - xlnx,ptp-enet-clock = <0x6750918>; -}; -&gpio0 { - emio-gpio-width = <64>; - gpio-mask-high = <0x0>; - gpio-mask-low = <0x5600>; -}; -&i2c0 { - clock-frequency = <400000>; - status = "okay"; -}; -&i2c1 { - clock-frequency = <400000>; - status = "okay"; -}; -&intc { - num_cpus = <2>; - num_interrupts = <96>; -}; -&qspi { - is-dual = <0>; - num-cs = <1>; - status = "okay"; -}; -&sdhci0 { - status = "okay"; - xlnx,has-cd = <0x1>; - xlnx,has-power = <0x0>; - xlnx,has-wp = <0x1>; -}; -&uart1 { - current-speed = <115200>; - device_type = "serial"; - port-number = <0>; - status = "okay"; -}; -&usb0 { - dr_mode = "host"; - phy_type = "ulpi"; - status = "okay"; - usb-reset = <&gpio0 46 0>; -}; -&clkc { - fclk-enable = <0x3>; - ps-clk-frequency = <50000000>; -}; diff --git a/meta-xilinx-bsp/recipes-bsp/device-tree/files/zybo-linux-bd-zynq7/pl.dtsi b/meta-xilinx-bsp/recipes-bsp/device-tree/files/zybo-linux-bd-zynq7/pl.dtsi deleted file mode 100644 index 32bc7688..00000000 --- a/meta-xilinx-bsp/recipes-bsp/device-tree/files/zybo-linux-bd-zynq7/pl.dtsi +++ /dev/null @@ -1,215 +0,0 @@ -/* - * CAUTION: This file is automatically generated by Xilinx. - * Version: HSI 2015.4 - * Today is: Fri Mar 4 15:40:49 2016 -*/ - - -/ { - amba_pl: amba_pl { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - ranges ; - axi_dynclk_0: axi_dynclk@43c10000 { - compatible = "xlnx,axi-dynclk-1.0"; - reg = <0x43c10000 0x10000>; - xlnx,s00-axi-addr-width = <0x5>; - xlnx,s00-axi-data-width = <0x20>; - }; - axi_gpio_btn: gpio@41210000 { - #gpio-cells = <2>; - compatible = "xlnx,xps-gpio-1.00.a"; - gpio-controller ; - reg = <0x41210000 0x10000>; - xlnx,all-inputs = <0x1>; - xlnx,all-inputs-2 = <0x0>; - xlnx,all-outputs = <0x0>; - xlnx,all-outputs-2 = <0x0>; - xlnx,dout-default = <0x00000000>; - xlnx,dout-default-2 = <0x00000000>; - xlnx,gpio-width = <0x4>; - xlnx,gpio2-width = <0x20>; - xlnx,interrupt-present = <0x0>; - xlnx,is-dual = <0x0>; - xlnx,tri-default = <0xFFFFFFFF>; - xlnx,tri-default-2 = <0xFFFFFFFF>; - }; - axi_gpio_hdmi: gpio@41230000 { - #gpio-cells = <2>; - compatible = "xlnx,xps-gpio-1.00.a"; - gpio-controller ; - interrupt-parent = <&intc>; - interrupts = <0 29 4>; - reg = <0x41230000 0x10000>; - xlnx,all-inputs = <0x1>; - xlnx,all-inputs-2 = <0x0>; - xlnx,all-outputs = <0x0>; - xlnx,all-outputs-2 = <0x0>; - xlnx,dout-default = <0x00000000>; - xlnx,dout-default-2 = <0x00000000>; - xlnx,gpio-width = <0x1>; - xlnx,gpio2-width = <0x20>; - xlnx,interrupt-present = <0x1>; - xlnx,is-dual = <0x0>; - xlnx,tri-default = <0xFFFFFFFF>; - xlnx,tri-default-2 = <0xFFFFFFFF>; - }; - axi_gpio_led: gpio@41200000 { - #gpio-cells = <2>; - compatible = "xlnx,xps-gpio-1.00.a"; - gpio-controller ; - reg = <0x41200000 0x10000>; - xlnx,all-inputs = <0x0>; - xlnx,all-inputs-2 = <0x0>; - xlnx,all-outputs = <0x1>; - xlnx,all-outputs-2 = <0x0>; - xlnx,dout-default = <0x00000000>; - xlnx,dout-default-2 = <0x00000000>; - xlnx,gpio-width = <0x4>; - xlnx,gpio2-width = <0x20>; - xlnx,interrupt-present = <0x0>; - xlnx,is-dual = <0x0>; - xlnx,tri-default = <0xFFFFFFFF>; - xlnx,tri-default-2 = <0xFFFFFFFF>; - }; - axi_gpio_sw: gpio@41220000 { - #gpio-cells = <2>; - compatible = "xlnx,xps-gpio-1.00.a"; - gpio-controller ; - reg = <0x41220000 0x10000>; - xlnx,all-inputs = <0x1>; - xlnx,all-inputs-2 = <0x0>; - xlnx,all-outputs = <0x0>; - xlnx,all-outputs-2 = <0x0>; - xlnx,dout-default = <0x00000000>; - xlnx,dout-default-2 = <0x00000000>; - xlnx,gpio-width = <0x4>; - xlnx,gpio2-width = <0x20>; - xlnx,interrupt-present = <0x0>; - xlnx,is-dual = <0x0>; - xlnx,tri-default = <0xFFFFFFFF>; - xlnx,tri-default-2 = <0xFFFFFFFF>; - }; - axi_i2s_adi_0: axi_i2s_adi@43c20000 { - compatible = "xlnx,axi-i2s-adi-1.0"; - reg = <0x43c20000 0x10000>; - xlnx,bclk-pol = <0x0>; - xlnx,dma-type = <0x1>; - xlnx,has-rx = <0x1>; - xlnx,has-tx = <0x1>; - xlnx,lrclk-pol = <0x0>; - xlnx,num-ch = <0x1>; - xlnx,s-axi-min-size = <0x000001FF>; - xlnx,slot-width = <0x18>; - }; - axi_vdma_0: dma@43000000 { - #dma-cells = <1>; - compatible = "xlnx,axi-vdma-1.00.a"; - clocks = <&clkc 15>; - clock-names = "s_axi_lite_aclk"; - interrupt-parent = <&intc>; - interrupts = <0 30 4>; - reg = <0x43000000 0x10000>; - xlnx,flush-fsync = <0x1>; - xlnx,num-fstores = <0x1>; - dma-channel@43000000 { - compatible = "xlnx,axi-vdma-mm2s-channel"; - interrupts = <0 30 4>; - xlnx,datawidth = <0x20>; - xlnx,device-id = <0x0>; - }; - }; - v_tc_0: v_tc@43c00000 { - compatible = "xlnx,v-tc-6.1"; - interrupt-parent = <&intc>; - interrupts = <0 31 4>; - reg = <0x43c00000 0x10000>; - xlnx,det-achroma-en = <0x0>; - xlnx,det-avideo-en = <0x1>; - xlnx,det-fieldid-en = <0x0>; - xlnx,det-hblank-en = <0x1>; - xlnx,det-hsync-en = <0x1>; - xlnx,det-vblank-en = <0x1>; - xlnx,det-vsync-en = <0x1>; - xlnx,detect-en = <0x0>; - xlnx,fsync-hstart0 = <0x0>; - xlnx,fsync-hstart1 = <0x0>; - xlnx,fsync-hstart10 = <0x0>; - xlnx,fsync-hstart11 = <0x0>; - xlnx,fsync-hstart12 = <0x0>; - xlnx,fsync-hstart13 = <0x0>; - xlnx,fsync-hstart14 = <0x0>; - xlnx,fsync-hstart15 = <0x0>; - xlnx,fsync-hstart2 = <0x0>; - xlnx,fsync-hstart3 = <0x0>; - xlnx,fsync-hstart4 = <0x0>; - xlnx,fsync-hstart5 = <0x0>; - xlnx,fsync-hstart6 = <0x0>; - xlnx,fsync-hstart7 = <0x0>; - xlnx,fsync-hstart8 = <0x0>; - xlnx,fsync-hstart9 = <0x0>; - xlnx,fsync-vstart0 = <0x0>; - xlnx,fsync-vstart1 = <0x0>; - xlnx,fsync-vstart10 = <0x0>; - xlnx,fsync-vstart11 = <0x0>; - xlnx,fsync-vstart12 = <0x0>; - xlnx,fsync-vstart13 = <0x0>; - xlnx,fsync-vstart14 = <0x0>; - xlnx,fsync-vstart15 = <0x0>; - xlnx,fsync-vstart2 = <0x0>; - xlnx,fsync-vstart3 = <0x0>; - xlnx,fsync-vstart4 = <0x0>; - xlnx,fsync-vstart5 = <0x0>; - xlnx,fsync-vstart6 = <0x0>; - xlnx,fsync-vstart7 = <0x0>; - xlnx,fsync-vstart8 = <0x0>; - xlnx,fsync-vstart9 = <0x0>; - xlnx,gen-achroma-en = <0x0>; - xlnx,gen-achroma-polarity = <0x1>; - xlnx,gen-auto-switch = <0x0>; - xlnx,gen-avideo-en = <0x1>; - xlnx,gen-avideo-polarity = <0x1>; - xlnx,gen-cparity = <0x0>; - xlnx,gen-f0-vblank-hend = <0x500>; - xlnx,gen-f0-vblank-hstart = <0x500>; - xlnx,gen-f0-vframe-size = <0x2ee>; - xlnx,gen-f0-vsync-hend = <0x500>; - xlnx,gen-f0-vsync-hstart = <0x500>; - xlnx,gen-f0-vsync-vend = <0x2d9>; - xlnx,gen-f0-vsync-vstart = <0x2d4>; - xlnx,gen-f1-vblank-hend = <0x500>; - xlnx,gen-f1-vblank-hstart = <0x500>; - xlnx,gen-f1-vframe-size = <0x2ee>; - xlnx,gen-f1-vsync-hend = <0x500>; - xlnx,gen-f1-vsync-hstart = <0x500>; - xlnx,gen-f1-vsync-vend = <0x2d9>; - xlnx,gen-f1-vsync-vstart = <0x2d4>; - xlnx,gen-fieldid-en = <0x0>; - xlnx,gen-fieldid-polarity = <0x1>; - xlnx,gen-hactive-size = <0x500>; - xlnx,gen-hblank-en = <0x1>; - xlnx,gen-hblank-polarity = <0x1>; - xlnx,gen-hframe-size = <0x672>; - xlnx,gen-hsync-en = <0x1>; - xlnx,gen-hsync-end = <0x596>; - xlnx,gen-hsync-polarity = <0x1>; - xlnx,gen-hsync-start = <0x56e>; - xlnx,gen-interlaced = <0x0>; - xlnx,gen-vactive-size = <0x2d0>; - xlnx,gen-vblank-en = <0x1>; - xlnx,gen-vblank-polarity = <0x1>; - xlnx,gen-video-format = <0x2>; - xlnx,gen-vsync-en = <0x1>; - xlnx,gen-vsync-polarity = <0x1>; - xlnx,generate-en = <0x1>; - xlnx,has-axi4-lite = <0x1>; - xlnx,has-intc-if = <0x0>; - xlnx,interlace-en = <0x0>; - xlnx,max-lines = <0x1000>; - xlnx,max-pixels = <0x1000>; - xlnx,num-fsyncs = <0x1>; - xlnx,sync-en = <0x0>; - }; - }; -}; diff --git a/meta-xilinx-bsp/recipes-bsp/device-tree/files/zybo-linux-bd-zynq7/zybo-linux-bd-zynq7.dts b/meta-xilinx-bsp/recipes-bsp/device-tree/files/zybo-linux-bd-zynq7/zybo-linux-bd-zynq7.dts deleted file mode 100644 index 19654392..00000000 --- a/meta-xilinx-bsp/recipes-bsp/device-tree/files/zybo-linux-bd-zynq7/zybo-linux-bd-zynq7.dts +++ /dev/null @@ -1,184 +0,0 @@ -/dts-v1/; -/include/ "skeleton.dtsi" -/include/ "zynq-7000.dtsi" -/include/ "zynq-7000-qspi-dummy.dtsi" -/include/ "pcw.dtsi" -/include/ "pl.dtsi" - -/ { - model = "Digilent-Zybo-Linux-BD-v2015.4"; - aliases { - serial0 = &uart1; - ethernet0 = &gem0; - spi0 = &qspi; - }; - chosen { - bootargs = ""; - stdout-path = "serial0:115200n8"; - }; - memory { - device_type = "memory"; - reg = <0x0 0x20000000>; - }; - - gpio-keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - autorepeat; - btn4 { - label = "btn4"; - gpios = <&gpio0 50 0>; - linux,code = <108>; /* down */ - gpio-key,wakeup; - autorepeat; - }; - btn5 { - label = "btn5"; - gpios = <&gpio0 51 0>; - linux,code = <103>; /* up */ - gpio-key,wakeup; - autorepeat; - }; - }; - - usb_phy0: usb_phy@0 { - compatible = "usb-nop-xceiv"; - #phy-cells = <0>; - reset-gpios = <&gpio0 46 1>; - }; -}; - -&amba { - u-boot,dm-pre-reloc; -}; - -&amba_pl { - encoder_0: digilent_encoder { - compatible = "digilent,drm-encoder"; - dglnt,edid-i2c = <&i2c1>; - }; - - xilinx_drm { - compatible = "xlnx,drm"; - xlnx,vtc = <&v_tc_0>; - xlnx,connector-type = "HDMIA"; - xlnx,encoder-slave = <&encoder_0>; - clocks = <&axi_dynclk_0>; - planes { - xlnx,pixel-format = "xrgb8888"; - plane0 { - dmas = <&axi_vdma_0 0>; - dma-names = "dma0"; - }; - }; - }; - - i2s_clk: i2s_clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <12288000>; - clock-output-names = "i2s_clk"; - }; - - sound { - compatible = "simple-audio-card"; - simple-audio-card,name = "ZYBO-Sound-Card"; - simple-audio-card,format = "i2s"; - simple-audio-card,bitclock-master = <&dailink0_master>; - simple-audio-card,frame-master = <&dailink0_master>; - simple-audio-card,widgets = - "Microphone", "Microphone Jack", - "Headphone", "Headphone Jack", - "Line", "Line In Jack"; - simple-audio-card,routing = - "MICIN", "Microphone Jack", - "Headphone Jack", "LHPOUT", - "Headphone Jack", "RHPOUT", - "LLINEIN", "Line In Jack", - "RLINEIN", "Line In Jack"; - dailink0_master: simple-audio-card,cpu { - clocks = <&i2s_clk>; - sound-dai = <&axi_i2s_adi_0>; - }; - simple-audio-card,codec { - clocks = <&i2s_clk>; - sound-dai = <&ssm2603>; - }; - }; -}; - -&axi_dynclk_0 { - compatible = "digilent,axi-dynclk"; - #clock-cells = <0>; - clocks = <&clkc 15>; -}; - -&axi_i2s_adi_0 { - #sound-dai-cells = <0>; - compatible = "adi,axi-i2s-1.00.a"; - clocks = <&clkc 15>, <&i2s_clk>; - clock-names = "axi", "ref"; - dmas = <&dmac_s 0 &dmac_s 1>; - dma-names = "tx", "rx"; -}; - -&gem0 { - phy-handle = <&phy0>; - phy-mode = "rgmii-id"; - local-mac-address = []; - phy0: phy@0 { - device_type = "ethernet-phy"; - reg = <0>; - }; -}; - -&i2c0 { - eeprom@50 { - /* Microchip 24AA02E48 */ - compatible = "microchip,24c02"; - reg = <0x50>; - }; - - ssm2603: ssm2603@1a{ - #sound-dai-cells = <0>; - compatible = "adi,ssm2603"; - reg = <0x1a>; - }; -}; - -&qspi { - #address-cells = <1>; - #size-cells = <0>; - flash0: flash@0 { - compatible = "micron,m25p80", "s25fl128s"; - reg = <0x0>; - #address-cells = <1>; - #size-cells = <1>; - spi-max-frequency = <50000000>; - partition@0x00000000 { - label = "boot"; - reg = <0x00000000 0x00300000>; - }; - partition@0x00300000 { - label = "bootenv"; - reg = <0x00300000 0x00020000>; - }; - partition@0x00320000 { - label = "kernel"; - reg = <0x00320000 0x00a80000>; - }; - partition@0x00da0000 { - label = "spare"; - reg = <0x00da0000 0x00000000>; - }; - }; -}; - -&usb0 { - usb-phy = <&usb_phy0>; -}; - -&v_tc_0 { - compatible = "xlnx,v-tc-5.01.a"; -}; diff --git a/meta-xilinx-bsp/recipes-bsp/device-tree/files/zynq-7000-qspi-dummy.dtsi b/meta-xilinx-bsp/recipes-bsp/device-tree/files/zynq-7000-qspi-dummy.dtsi deleted file mode 100644 index d059a2da..00000000 --- a/meta-xilinx-bsp/recipes-bsp/device-tree/files/zynq-7000-qspi-dummy.dtsi +++ /dev/null @@ -1,4 +0,0 @@ -&amba { - /* empty defintion for kernels that don't have qspi node */ - qspi: spi@e000d000 { }; -}; diff --git a/meta-xilinx-bsp/recipes-bsp/dfx-mgr/dfx-mgr_%.bbappend b/meta-xilinx-bsp/recipes-bsp/dfx-mgr/dfx-mgr_%.bbappend new file mode 100644 index 00000000..8fdf14bb --- /dev/null +++ b/meta-xilinx-bsp/recipes-bsp/dfx-mgr/dfx-mgr_%.bbappend @@ -0,0 +1,10 @@ +FILESEXTRAPATHS:append := ":${THISDIR}/files" + +SRC_URI += "file://zcu106-xlnx-firmware-detect" + +PACKAGE_ARCH:zcu106-zynqmp = "${MACHINE_ARCH}" + +# ZCU106 eval board firmware detection script. +do_install:append:zcu106-zynqmp () { + install -m 0755 ${WORKDIR}/zcu106-xlnx-firmware-detect ${D}${bindir}/xlnx-firmware-detect +} diff --git a/meta-xilinx-bsp/recipes-bsp/dfx-mgr/files/zcu106-xlnx-firmware-detect b/meta-xilinx-bsp/recipes-bsp/dfx-mgr/files/zcu106-xlnx-firmware-detect new file mode 100644 index 00000000..ef5654cc --- /dev/null +++ b/meta-xilinx-bsp/recipes-bsp/dfx-mgr/files/zcu106-xlnx-firmware-detect @@ -0,0 +1,71 @@ +#! /bin/sh + +# Copyright (C) 2022 Xilinx, Inc. All rights reserved. +# Copyright (C) 2023 Advanced Micro Devices, Inc. All rights reserved. +# +# SPDX-License-Identifier: MIT + +# read values from dfx-mgr conf file +conffile="/etc/dfx-mgrd/daemon.conf" +if [ ! -f "${conffile}" ]; then + echo "dfx-mgrd configuration file not found: ${conffile}" + exit 1 +fi + +fwbasedir=$(grep "firmware_location" ${conffile} | sed 's/.*:.*\[\"\(.*\)\"\],\?/\1/') +if [ -z "${fwbasedir}" ]; then + echo "Property 'firmware_location' not found in ${conffile}" + exit 1 +fi + +fwfile=$(grep "default_accel" ${conffile} | sed 's/.*:.*\"\(.*\)\",\?/\1/') +if [ -z "${fwfile}" ]; then + echo "Property 'default_accel' not found in ${conffile}" + exit 1 +fi + +# check if default firmware is already set and present +if [ -f "${fwfile}" ]; then + fwname=$(cat ${fwfile}) + fwdir="${fwbasedir}/${fwname}" + if [ -n "${fwname}" ] && [ -d "${fwdir}" ]; then + echo "Default firmware detected: ${fwname}" + exit 0 + fi +fi + +# search for firmware based on EEPROM board id +echo "Trying to detect default firmware based on EEPROM..." + +#check if board is a zcu106 eval board product +eeprom=$(ls /sys/bus/i2c/devices/*54/eeprom 2> /dev/null) +if [ -n "${eeprom}" ]; then + boardid=`dd if=$eeprom bs=1 count=6 skip=208 2>/dev/null | tr '[:upper:]' '[:lower:]'` + revision=`dd if=$eeprom bs=1 count=3 skip=224 2>/dev/null | tr '[:upper:]' '[:lower:]'` + + fwname="${boardid}-${revision}" + fwdir="${fwbasedir}/${fwname}" + + fixed_rev=2.0 + var=$(awk 'BEGIN{ print "'$fixed_rev'"<"'$revision'" }') + + if [ "${boardid}" == "zcu106" ] && [ "${var}" -eq 1 ] ;then + revision=2.0 + echo "later than 2.0 board revisions are supported in 2.0 bit and dtbo files" + fwname="${boardid}-${revision}" + fwdir="${fwbasedir}/${fwname}" + echo "${fwname}" > "${fwfile}" + exit 1 + elif [ ! -d "${fwdir}" ] ; then + echo "No default firmware named ${fwname} found in ${fwbasedir} , Loading rev1.0 bitstream and dtbo as default " + revision=1.0 + fwname=$(ls ${fwbasedir} | grep ${revision}) + fwdir="${fwbasedir}/${fwname}" + echo "${fwname}" > "${fwfile}" + exit 1 + fi + + echo "Default firmware detected: ${fwname}" + echo "${fwname}" > "${fwfile}" + exit 0 +fi diff --git a/meta-xilinx-bsp/recipes-bsp/embeddedsw/fsbl-firmware_%.bbappend b/meta-xilinx-bsp/recipes-bsp/embeddedsw/fsbl-firmware_%.bbappend new file mode 100644 index 00000000..6a23dc47 --- /dev/null +++ b/meta-xilinx-bsp/recipes-bsp/embeddedsw/fsbl-firmware_%.bbappend @@ -0,0 +1,20 @@ +# QEMU for the Kria SOM requires a section from the FSBL to be extracted + +PMU_CONF_NAME ?= "pmu-conf" +PMU_CONF_BASE_NAME ?= "${PMU_CONF_NAME}-${PKGE}-${PKGV}-${PKGR}-${MACHINE}${IMAGE_VERSION_SUFFIX}" + +# Required so we can run objcopy in do_compile +DEPENDS:append:zynqmp = " virtual/${TARGET_PREFIX}binutils" + +do_compile:append:zynqmp () { + if [ -z "${SYSTEM_DTFILE}" ]; then + ${OBJCOPY} --dump-section .sys_cfg_data=${B}/${PMU_CONF_NAME}.bin ${B}/${ESW_COMPONENT} + fi +} + +do_deploy:append:zynqmp () { + if [ -z "${SYSTEM_DTFILE}" ]; then + install -Dm 0644 ${B}/${PMU_CONF_NAME}.bin ${DEPLOYDIR}/${PMU_CONF_BASE_NAME}.bin + ln -s ${PMU_CONF_BASE_NAME}.bin ${DEPLOYDIR}/${PMU_CONF_NAME}.bin + fi +} diff --git a/meta-xilinx-bsp/recipes-bsp/platform-init/platform-init.bb b/meta-xilinx-bsp/recipes-bsp/platform-init/platform-init.bb deleted file mode 100644 index 32509b07..00000000 --- a/meta-xilinx-bsp/recipes-bsp/platform-init/platform-init.bb +++ /dev/null @@ -1,38 +0,0 @@ -SUMMARY = "Xilinx Platform Headers" -DESCRPTION = "Xilinx ps*_init_gpl.c/h platform init code, used for building u-boot-spl and fsbl" -HOMEPAGE = "http://www.xilinx.com" -SECTION = "bsp" - -INHIBIT_DEFAULT_DEPS = "1" - -PACKAGE_ARCH = "${MACHINE_ARCH}" - -inherit xilinx-platform-init - -COMPATIBLE_MACHINE = "$^" -COMPATIBLE_MACHINE_picozed-zynq7 = "picozed-zynq7" - -LICENSE = "GPLv2+" -LIC_FILES_CHKSUM = "file://${COREBASE}/meta/files/common-licenses/GPL-2.0;md5=801f80980d171dd6425610833a22dbe6" - -PROVIDES += "virtual/xilinx-platform-init" - -SRC_URI = "${@" ".join(["file://%s" % f for f in (d.getVar('PLATFORM_INIT_FILES') or "").split()])}" - -S = "${WORKDIR}" - -SYSROOT_DIRS += "${PLATFORM_INIT_DIR}" - -do_compile() { - : -} - -do_install() { - install -d ${D}${PLATFORM_INIT_DIR} - for i in ${PLATFORM_INIT_FILES}; do - install -m 0644 ${S}/$i ${D}${PLATFORM_INIT_DIR}/ - done -} - -FILES_${PN} += "${PLATFORM_INIT_DIR}/*" - diff --git a/meta-xilinx-bsp/recipes-bsp/platform-init/platform-init/picozed-zynq7/ps7_init_gpl.c b/meta-xilinx-bsp/recipes-bsp/platform-init/platform-init/picozed-zynq7/ps7_init_gpl.c deleted file mode 100644 index 5587ab25..00000000 --- a/meta-xilinx-bsp/recipes-bsp/platform-init/platform-init/picozed-zynq7/ps7_init_gpl.c +++ /dev/null @@ -1,13191 +0,0 @@ -/****************************************************************************** -* (c) Copyright 2010-2014 Xilinx, Inc. All rights reserved. -* -* This program is free software; you can redistribute it and/or modify -* it under the terms of the GNU General Public License as published by -* the Free Software Foundation; either version 2 of the License, or -* (at your option) any later version. -* -* This program is distributed in the hope that it will be useful, -* but WITHOUT ANY WARRANTY; without even the implied warranty of -* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -* GNU General Public License for more details. -* -* You should have received a copy of the GNU General Public License along -* with this program; if not, see <http://www.gnu.org/licenses/> -* -* -******************************************************************************/ -/****************************************************************************/ -/** -* -* @file ps7_init_gpl.c -* -* This file is automatically generated -* -*****************************************************************************/ - -#include "ps7_init_gpl.h" - -unsigned long ps7_pll_init_data_3_0[] = { - // START: top - // .. START: SLCR SETTINGS - // .. UNLOCK_KEY = 0XDF0D - // .. ==> 0XF8000008[15:0] = 0x0000DF0DU - // .. ==> MASK : 0x0000FFFFU VAL : 0x0000DF0DU - // .. - EMIT_MASKWRITE(0XF8000008, 0x0000FFFFU ,0x0000DF0DU), - // .. FINISH: SLCR SETTINGS - // .. START: PLL SLCR REGISTERS - // .. .. START: ARM PLL INIT - // .. .. PLL_RES = 0x4 - // .. .. ==> 0XF8000110[7:4] = 0x00000004U - // .. .. ==> MASK : 0x000000F0U VAL : 0x00000040U - // .. .. PLL_CP = 0x2 - // .. .. ==> 0XF8000110[11:8] = 0x00000002U - // .. .. ==> MASK : 0x00000F00U VAL : 0x00000200U - // .. .. LOCK_CNT = 0xfa - // .. .. ==> 0XF8000110[21:12] = 0x000000FAU - // .. .. ==> MASK : 0x003FF000U VAL : 0x000FA000U - // .. .. - EMIT_MASKWRITE(0XF8000110, 0x003FFFF0U ,0x000FA240U), - // .. .. .. START: UPDATE FB_DIV - // .. .. .. PLL_FDIV = 0x3c - // .. .. .. ==> 0XF8000100[18:12] = 0x0000003CU - // .. .. .. ==> MASK : 0x0007F000U VAL : 0x0003C000U - // .. .. .. - EMIT_MASKWRITE(0XF8000100, 0x0007F000U ,0x0003C000U), - // .. .. .. FINISH: UPDATE FB_DIV - // .. .. .. START: BY PASS PLL - // .. .. .. PLL_BYPASS_FORCE = 1 - // .. .. .. ==> 0XF8000100[4:4] = 0x00000001U - // .. .. .. ==> MASK : 0x00000010U VAL : 0x00000010U - // .. .. .. - EMIT_MASKWRITE(0XF8000100, 0x00000010U ,0x00000010U), - // .. .. .. FINISH: BY PASS PLL - // .. .. .. START: ASSERT RESET - // .. .. .. PLL_RESET = 1 - // .. .. .. ==> 0XF8000100[0:0] = 0x00000001U - // .. .. .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. .. .. - EMIT_MASKWRITE(0XF8000100, 0x00000001U ,0x00000001U), - // .. .. .. FINISH: ASSERT RESET - // .. .. .. START: DEASSERT RESET - // .. .. .. PLL_RESET = 0 - // .. .. .. ==> 0XF8000100[0:0] = 0x00000000U - // .. .. .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. .. .. - EMIT_MASKWRITE(0XF8000100, 0x00000001U ,0x00000000U), - // .. .. .. FINISH: DEASSERT RESET - // .. .. .. START: CHECK PLL STATUS - // .. .. .. ARM_PLL_LOCK = 1 - // .. .. .. ==> 0XF800010C[0:0] = 0x00000001U - // .. .. .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. .. .. - EMIT_MASKPOLL(0XF800010C, 0x00000001U), - // .. .. .. FINISH: CHECK PLL STATUS - // .. .. .. START: REMOVE PLL BY PASS - // .. .. .. PLL_BYPASS_FORCE = 0 - // .. .. .. ==> 0XF8000100[4:4] = 0x00000000U - // .. .. .. ==> MASK : 0x00000010U VAL : 0x00000000U - // .. .. .. - EMIT_MASKWRITE(0XF8000100, 0x00000010U ,0x00000000U), - // .. .. .. FINISH: REMOVE PLL BY PASS - // .. .. .. SRCSEL = 0x0 - // .. .. .. ==> 0XF8000120[5:4] = 0x00000000U - // .. .. .. ==> MASK : 0x00000030U VAL : 0x00000000U - // .. .. .. DIVISOR = 0x3 - // .. .. .. ==> 0XF8000120[13:8] = 0x00000003U - // .. .. .. ==> MASK : 0x00003F00U VAL : 0x00000300U - // .. .. .. CPU_6OR4XCLKACT = 0x1 - // .. .. .. ==> 0XF8000120[24:24] = 0x00000001U - // .. .. .. ==> MASK : 0x01000000U VAL : 0x01000000U - // .. .. .. CPU_3OR2XCLKACT = 0x1 - // .. .. .. ==> 0XF8000120[25:25] = 0x00000001U - // .. .. .. ==> MASK : 0x02000000U VAL : 0x02000000U - // .. .. .. CPU_2XCLKACT = 0x1 - // .. .. .. ==> 0XF8000120[26:26] = 0x00000001U - // .. .. .. ==> MASK : 0x04000000U VAL : 0x04000000U - // .. .. .. CPU_1XCLKACT = 0x1 - // .. .. .. ==> 0XF8000120[27:27] = 0x00000001U - // .. .. .. ==> MASK : 0x08000000U VAL : 0x08000000U - // .. .. .. CPU_PERI_CLKACT = 0x1 - // .. .. .. ==> 0XF8000120[28:28] = 0x00000001U - // .. .. .. ==> MASK : 0x10000000U VAL : 0x10000000U - // .. .. .. - EMIT_MASKWRITE(0XF8000120, 0x1F003F30U ,0x1F000300U), - // .. .. FINISH: ARM PLL INIT - // .. .. START: DDR PLL INIT - // .. .. PLL_RES = 0x2 - // .. .. ==> 0XF8000114[7:4] = 0x00000002U - // .. .. ==> MASK : 0x000000F0U VAL : 0x00000020U - // .. .. PLL_CP = 0x2 - // .. .. ==> 0XF8000114[11:8] = 0x00000002U - // .. .. ==> MASK : 0x00000F00U VAL : 0x00000200U - // .. .. LOCK_CNT = 0x12c - // .. .. ==> 0XF8000114[21:12] = 0x0000012CU - // .. .. ==> MASK : 0x003FF000U VAL : 0x0012C000U - // .. .. - EMIT_MASKWRITE(0XF8000114, 0x003FFFF0U ,0x0012C220U), - // .. .. .. START: UPDATE FB_DIV - // .. .. .. PLL_FDIV = 0x20 - // .. .. .. ==> 0XF8000104[18:12] = 0x00000020U - // .. .. .. ==> MASK : 0x0007F000U VAL : 0x00020000U - // .. .. .. - EMIT_MASKWRITE(0XF8000104, 0x0007F000U ,0x00020000U), - // .. .. .. FINISH: UPDATE FB_DIV - // .. .. .. START: BY PASS PLL - // .. .. .. PLL_BYPASS_FORCE = 1 - // .. .. .. ==> 0XF8000104[4:4] = 0x00000001U - // .. .. .. ==> MASK : 0x00000010U VAL : 0x00000010U - // .. .. .. - EMIT_MASKWRITE(0XF8000104, 0x00000010U ,0x00000010U), - // .. .. .. FINISH: BY PASS PLL - // .. .. .. START: ASSERT RESET - // .. .. .. PLL_RESET = 1 - // .. .. .. ==> 0XF8000104[0:0] = 0x00000001U - // .. .. .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. .. .. - EMIT_MASKWRITE(0XF8000104, 0x00000001U ,0x00000001U), - // .. .. .. FINISH: ASSERT RESET - // .. .. .. START: DEASSERT RESET - // .. .. .. PLL_RESET = 0 - // .. .. .. ==> 0XF8000104[0:0] = 0x00000000U - // .. .. .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. .. .. - EMIT_MASKWRITE(0XF8000104, 0x00000001U ,0x00000000U), - // .. .. .. FINISH: DEASSERT RESET - // .. .. .. START: CHECK PLL STATUS - // .. .. .. DDR_PLL_LOCK = 1 - // .. .. .. ==> 0XF800010C[1:1] = 0x00000001U - // .. .. .. ==> MASK : 0x00000002U VAL : 0x00000002U - // .. .. .. - EMIT_MASKPOLL(0XF800010C, 0x00000002U), - // .. .. .. FINISH: CHECK PLL STATUS - // .. .. .. START: REMOVE PLL BY PASS - // .. .. .. PLL_BYPASS_FORCE = 0 - // .. .. .. ==> 0XF8000104[4:4] = 0x00000000U - // .. .. .. ==> MASK : 0x00000010U VAL : 0x00000000U - // .. .. .. - EMIT_MASKWRITE(0XF8000104, 0x00000010U ,0x00000000U), - // .. .. .. FINISH: REMOVE PLL BY PASS - // .. .. .. DDR_3XCLKACT = 0x1 - // .. .. .. ==> 0XF8000124[0:0] = 0x00000001U - // .. .. .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. .. .. DDR_2XCLKACT = 0x1 - // .. .. .. ==> 0XF8000124[1:1] = 0x00000001U - // .. .. .. ==> MASK : 0x00000002U VAL : 0x00000002U - // .. .. .. DDR_3XCLK_DIVISOR = 0x2 - // .. .. .. ==> 0XF8000124[25:20] = 0x00000002U - // .. .. .. ==> MASK : 0x03F00000U VAL : 0x00200000U - // .. .. .. DDR_2XCLK_DIVISOR = 0x3 - // .. .. .. ==> 0XF8000124[31:26] = 0x00000003U - // .. .. .. ==> MASK : 0xFC000000U VAL : 0x0C000000U - // .. .. .. - EMIT_MASKWRITE(0XF8000124, 0xFFF00003U ,0x0C200003U), - // .. .. FINISH: DDR PLL INIT - // .. .. START: IO PLL INIT - // .. .. PLL_RES = 0x4 - // .. .. ==> 0XF8000118[7:4] = 0x00000004U - // .. .. ==> MASK : 0x000000F0U VAL : 0x00000040U - // .. .. PLL_CP = 0x2 - // .. .. ==> 0XF8000118[11:8] = 0x00000002U - // .. .. ==> MASK : 0x00000F00U VAL : 0x00000200U - // .. .. LOCK_CNT = 0xfa - // .. .. ==> 0XF8000118[21:12] = 0x000000FAU - // .. .. ==> MASK : 0x003FF000U VAL : 0x000FA000U - // .. .. - EMIT_MASKWRITE(0XF8000118, 0x003FFFF0U ,0x000FA240U), - // .. .. .. START: UPDATE FB_DIV - // .. .. .. PLL_FDIV = 0x3c - // .. .. .. ==> 0XF8000108[18:12] = 0x0000003CU - // .. .. .. ==> MASK : 0x0007F000U VAL : 0x0003C000U - // .. .. .. - EMIT_MASKWRITE(0XF8000108, 0x0007F000U ,0x0003C000U), - // .. .. .. FINISH: UPDATE FB_DIV - // .. .. .. START: BY PASS PLL - // .. .. .. PLL_BYPASS_FORCE = 1 - // .. .. .. ==> 0XF8000108[4:4] = 0x00000001U - // .. .. .. ==> MASK : 0x00000010U VAL : 0x00000010U - // .. .. .. - EMIT_MASKWRITE(0XF8000108, 0x00000010U ,0x00000010U), - // .. .. .. FINISH: BY PASS PLL - // .. .. .. START: ASSERT RESET - // .. .. .. PLL_RESET = 1 - // .. .. .. ==> 0XF8000108[0:0] = 0x00000001U - // .. .. .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. .. .. - EMIT_MASKWRITE(0XF8000108, 0x00000001U ,0x00000001U), - // .. .. .. FINISH: ASSERT RESET - // .. .. .. START: DEASSERT RESET - // .. .. .. PLL_RESET = 0 - // .. .. .. ==> 0XF8000108[0:0] = 0x00000000U - // .. .. .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. .. .. - EMIT_MASKWRITE(0XF8000108, 0x00000001U ,0x00000000U), - // .. .. .. FINISH: DEASSERT RESET - // .. .. .. START: CHECK PLL STATUS - // .. .. .. IO_PLL_LOCK = 1 - // .. .. .. ==> 0XF800010C[2:2] = 0x00000001U - // .. .. .. ==> MASK : 0x00000004U VAL : 0x00000004U - // .. .. .. - EMIT_MASKPOLL(0XF800010C, 0x00000004U), - // .. .. .. FINISH: CHECK PLL STATUS - // .. .. .. START: REMOVE PLL BY PASS - // .. .. .. PLL_BYPASS_FORCE = 0 - // .. .. .. ==> 0XF8000108[4:4] = 0x00000000U - // .. .. .. ==> MASK : 0x00000010U VAL : 0x00000000U - // .. .. .. - EMIT_MASKWRITE(0XF8000108, 0x00000010U ,0x00000000U), - // .. .. .. FINISH: REMOVE PLL BY PASS - // .. .. FINISH: IO PLL INIT - // .. FINISH: PLL SLCR REGISTERS - // .. START: LOCK IT BACK - // .. LOCK_KEY = 0X767B - // .. ==> 0XF8000004[15:0] = 0x0000767BU - // .. ==> MASK : 0x0000FFFFU VAL : 0x0000767BU - // .. - EMIT_MASKWRITE(0XF8000004, 0x0000FFFFU ,0x0000767BU), - // .. FINISH: LOCK IT BACK - // FINISH: top - // - EMIT_EXIT(), - - // -}; - -unsigned long ps7_clock_init_data_3_0[] = { - // START: top - // .. START: SLCR SETTINGS - // .. UNLOCK_KEY = 0XDF0D - // .. ==> 0XF8000008[15:0] = 0x0000DF0DU - // .. ==> MASK : 0x0000FFFFU VAL : 0x0000DF0DU - // .. - EMIT_MASKWRITE(0XF8000008, 0x0000FFFFU ,0x0000DF0DU), - // .. FINISH: SLCR SETTINGS - // .. START: CLOCK CONTROL SLCR REGISTERS - // .. CLKACT = 0x1 - // .. ==> 0XF8000128[0:0] = 0x00000001U - // .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. DIVISOR0 = 0x23 - // .. ==> 0XF8000128[13:8] = 0x00000023U - // .. ==> MASK : 0x00003F00U VAL : 0x00002300U - // .. DIVISOR1 = 0x3 - // .. ==> 0XF8000128[25:20] = 0x00000003U - // .. ==> MASK : 0x03F00000U VAL : 0x00300000U - // .. - EMIT_MASKWRITE(0XF8000128, 0x03F03F01U ,0x00302301U), - // .. CLKACT = 0x1 - // .. ==> 0XF8000138[0:0] = 0x00000001U - // .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. SRCSEL = 0x0 - // .. ==> 0XF8000138[4:4] = 0x00000000U - // .. ==> MASK : 0x00000010U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000138, 0x00000011U ,0x00000001U), - // .. CLKACT = 0x1 - // .. ==> 0XF8000140[0:0] = 0x00000001U - // .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. SRCSEL = 0x0 - // .. ==> 0XF8000140[6:4] = 0x00000000U - // .. ==> MASK : 0x00000070U VAL : 0x00000000U - // .. DIVISOR = 0x10 - // .. ==> 0XF8000140[13:8] = 0x00000010U - // .. ==> MASK : 0x00003F00U VAL : 0x00001000U - // .. DIVISOR1 = 0x1 - // .. ==> 0XF8000140[25:20] = 0x00000001U - // .. ==> MASK : 0x03F00000U VAL : 0x00100000U - // .. - EMIT_MASKWRITE(0XF8000140, 0x03F03F71U ,0x00101001U), - // .. CLKACT = 0x1 - // .. ==> 0XF800014C[0:0] = 0x00000001U - // .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. SRCSEL = 0x0 - // .. ==> 0XF800014C[5:4] = 0x00000000U - // .. ==> MASK : 0x00000030U VAL : 0x00000000U - // .. DIVISOR = 0xa - // .. ==> 0XF800014C[13:8] = 0x0000000AU - // .. ==> MASK : 0x00003F00U VAL : 0x00000A00U - // .. - EMIT_MASKWRITE(0XF800014C, 0x00003F31U ,0x00000A01U), - // .. CLKACT0 = 0x0 - // .. ==> 0XF8000150[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. CLKACT1 = 0x1 - // .. ==> 0XF8000150[1:1] = 0x00000001U - // .. ==> MASK : 0x00000002U VAL : 0x00000002U - // .. SRCSEL = 0x0 - // .. ==> 0XF8000150[5:4] = 0x00000000U - // .. ==> MASK : 0x00000030U VAL : 0x00000000U - // .. DIVISOR = 0x28 - // .. ==> 0XF8000150[13:8] = 0x00000028U - // .. ==> MASK : 0x00003F00U VAL : 0x00002800U - // .. - EMIT_MASKWRITE(0XF8000150, 0x00003F33U ,0x00002802U), - // .. CLKACT0 = 0x0 - // .. ==> 0XF8000154[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. CLKACT1 = 0x1 - // .. ==> 0XF8000154[1:1] = 0x00000001U - // .. ==> MASK : 0x00000002U VAL : 0x00000002U - // .. SRCSEL = 0x0 - // .. ==> 0XF8000154[5:4] = 0x00000000U - // .. ==> MASK : 0x00000030U VAL : 0x00000000U - // .. DIVISOR = 0x28 - // .. ==> 0XF8000154[13:8] = 0x00000028U - // .. ==> MASK : 0x00003F00U VAL : 0x00002800U - // .. - EMIT_MASKWRITE(0XF8000154, 0x00003F33U ,0x00002802U), - // .. .. START: TRACE CLOCK - // .. .. FINISH: TRACE CLOCK - // .. .. CLKACT = 0x1 - // .. .. ==> 0XF8000168[0:0] = 0x00000001U - // .. .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. .. SRCSEL = 0x0 - // .. .. ==> 0XF8000168[5:4] = 0x00000000U - // .. .. ==> MASK : 0x00000030U VAL : 0x00000000U - // .. .. DIVISOR = 0xa - // .. .. ==> 0XF8000168[13:8] = 0x0000000AU - // .. .. ==> MASK : 0x00003F00U VAL : 0x00000A00U - // .. .. - EMIT_MASKWRITE(0XF8000168, 0x00003F31U ,0x00000A01U), - // .. .. SRCSEL = 0x0 - // .. .. ==> 0XF8000170[5:4] = 0x00000000U - // .. .. ==> MASK : 0x00000030U VAL : 0x00000000U - // .. .. DIVISOR0 = 0x14 - // .. .. ==> 0XF8000170[13:8] = 0x00000014U - // .. .. ==> MASK : 0x00003F00U VAL : 0x00001400U - // .. .. DIVISOR1 = 0x1 - // .. .. ==> 0XF8000170[25:20] = 0x00000001U - // .. .. ==> MASK : 0x03F00000U VAL : 0x00100000U - // .. .. - EMIT_MASKWRITE(0XF8000170, 0x03F03F30U ,0x00101400U), - // .. .. SRCSEL = 0x0 - // .. .. ==> 0XF8000180[5:4] = 0x00000000U - // .. .. ==> MASK : 0x00000030U VAL : 0x00000000U - // .. .. DIVISOR0 = 0x14 - // .. .. ==> 0XF8000180[13:8] = 0x00000014U - // .. .. ==> MASK : 0x00003F00U VAL : 0x00001400U - // .. .. DIVISOR1 = 0x1 - // .. .. ==> 0XF8000180[25:20] = 0x00000001U - // .. .. ==> MASK : 0x03F00000U VAL : 0x00100000U - // .. .. - EMIT_MASKWRITE(0XF8000180, 0x03F03F30U ,0x00101400U), - // .. .. SRCSEL = 0x0 - // .. .. ==> 0XF8000190[5:4] = 0x00000000U - // .. .. ==> MASK : 0x00000030U VAL : 0x00000000U - // .. .. DIVISOR0 = 0x3c - // .. .. ==> 0XF8000190[13:8] = 0x0000003CU - // .. .. ==> MASK : 0x00003F00U VAL : 0x00003C00U - // .. .. DIVISOR1 = 0x1 - // .. .. ==> 0XF8000190[25:20] = 0x00000001U - // .. .. ==> MASK : 0x03F00000U VAL : 0x00100000U - // .. .. - EMIT_MASKWRITE(0XF8000190, 0x03F03F30U ,0x00103C00U), - // .. .. SRCSEL = 0x0 - // .. .. ==> 0XF80001A0[5:4] = 0x00000000U - // .. .. ==> MASK : 0x00000030U VAL : 0x00000000U - // .. .. DIVISOR0 = 0x28 - // .. .. ==> 0XF80001A0[13:8] = 0x00000028U - // .. .. ==> MASK : 0x00003F00U VAL : 0x00002800U - // .. .. DIVISOR1 = 0x1 - // .. .. ==> 0XF80001A0[25:20] = 0x00000001U - // .. .. ==> MASK : 0x03F00000U VAL : 0x00100000U - // .. .. - EMIT_MASKWRITE(0XF80001A0, 0x03F03F30U ,0x00102800U), - // .. .. CLK_621_TRUE = 0x1 - // .. .. ==> 0XF80001C4[0:0] = 0x00000001U - // .. .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. .. - EMIT_MASKWRITE(0XF80001C4, 0x00000001U ,0x00000001U), - // .. .. DMA_CPU_2XCLKACT = 0x1 - // .. .. ==> 0XF800012C[0:0] = 0x00000001U - // .. .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. .. USB0_CPU_1XCLKACT = 0x1 - // .. .. ==> 0XF800012C[2:2] = 0x00000001U - // .. .. ==> MASK : 0x00000004U VAL : 0x00000004U - // .. .. USB1_CPU_1XCLKACT = 0x1 - // .. .. ==> 0XF800012C[3:3] = 0x00000001U - // .. .. ==> MASK : 0x00000008U VAL : 0x00000008U - // .. .. GEM0_CPU_1XCLKACT = 0x1 - // .. .. ==> 0XF800012C[6:6] = 0x00000001U - // .. .. ==> MASK : 0x00000040U VAL : 0x00000040U - // .. .. GEM1_CPU_1XCLKACT = 0x0 - // .. .. ==> 0XF800012C[7:7] = 0x00000000U - // .. .. ==> MASK : 0x00000080U VAL : 0x00000000U - // .. .. SDI0_CPU_1XCLKACT = 0x0 - // .. .. ==> 0XF800012C[10:10] = 0x00000000U - // .. .. ==> MASK : 0x00000400U VAL : 0x00000000U - // .. .. SDI1_CPU_1XCLKACT = 0x1 - // .. .. ==> 0XF800012C[11:11] = 0x00000001U - // .. .. ==> MASK : 0x00000800U VAL : 0x00000800U - // .. .. SPI0_CPU_1XCLKACT = 0x0 - // .. .. ==> 0XF800012C[14:14] = 0x00000000U - // .. .. ==> MASK : 0x00004000U VAL : 0x00000000U - // .. .. SPI1_CPU_1XCLKACT = 0x0 - // .. .. ==> 0XF800012C[15:15] = 0x00000000U - // .. .. ==> MASK : 0x00008000U VAL : 0x00000000U - // .. .. CAN0_CPU_1XCLKACT = 0x0 - // .. .. ==> 0XF800012C[16:16] = 0x00000000U - // .. .. ==> MASK : 0x00010000U VAL : 0x00000000U - // .. .. CAN1_CPU_1XCLKACT = 0x0 - // .. .. ==> 0XF800012C[17:17] = 0x00000000U - // .. .. ==> MASK : 0x00020000U VAL : 0x00000000U - // .. .. I2C0_CPU_1XCLKACT = 0x1 - // .. .. ==> 0XF800012C[18:18] = 0x00000001U - // .. .. ==> MASK : 0x00040000U VAL : 0x00040000U - // .. .. I2C1_CPU_1XCLKACT = 0x1 - // .. .. ==> 0XF800012C[19:19] = 0x00000001U - // .. .. ==> MASK : 0x00080000U VAL : 0x00080000U - // .. .. UART0_CPU_1XCLKACT = 0x0 - // .. .. ==> 0XF800012C[20:20] = 0x00000000U - // .. .. ==> MASK : 0x00100000U VAL : 0x00000000U - // .. .. UART1_CPU_1XCLKACT = 0x1 - // .. .. ==> 0XF800012C[21:21] = 0x00000001U - // .. .. ==> MASK : 0x00200000U VAL : 0x00200000U - // .. .. GPIO_CPU_1XCLKACT = 0x1 - // .. .. ==> 0XF800012C[22:22] = 0x00000001U - // .. .. ==> MASK : 0x00400000U VAL : 0x00400000U - // .. .. LQSPI_CPU_1XCLKACT = 0x1 - // .. .. ==> 0XF800012C[23:23] = 0x00000001U - // .. .. ==> MASK : 0x00800000U VAL : 0x00800000U - // .. .. SMC_CPU_1XCLKACT = 0x1 - // .. .. ==> 0XF800012C[24:24] = 0x00000001U - // .. .. ==> MASK : 0x01000000U VAL : 0x01000000U - // .. .. - EMIT_MASKWRITE(0XF800012C, 0x01FFCCCDU ,0x01EC084DU), - // .. FINISH: CLOCK CONTROL SLCR REGISTERS - // .. START: THIS SHOULD BE BLANK - // .. FINISH: THIS SHOULD BE BLANK - // .. START: LOCK IT BACK - // .. LOCK_KEY = 0X767B - // .. ==> 0XF8000004[15:0] = 0x0000767BU - // .. ==> MASK : 0x0000FFFFU VAL : 0x0000767BU - // .. - EMIT_MASKWRITE(0XF8000004, 0x0000FFFFU ,0x0000767BU), - // .. FINISH: LOCK IT BACK - // FINISH: top - // - EMIT_EXIT(), - - // -}; - -unsigned long ps7_ddr_init_data_3_0[] = { - // START: top - // .. START: DDR INITIALIZATION - // .. .. START: LOCK DDR - // .. .. reg_ddrc_soft_rstb = 0 - // .. .. ==> 0XF8006000[0:0] = 0x00000000U - // .. .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. .. reg_ddrc_powerdown_en = 0x0 - // .. .. ==> 0XF8006000[1:1] = 0x00000000U - // .. .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. .. reg_ddrc_data_bus_width = 0x0 - // .. .. ==> 0XF8006000[3:2] = 0x00000000U - // .. .. ==> MASK : 0x0000000CU VAL : 0x00000000U - // .. .. reg_ddrc_burst8_refresh = 0x0 - // .. .. ==> 0XF8006000[6:4] = 0x00000000U - // .. .. ==> MASK : 0x00000070U VAL : 0x00000000U - // .. .. reg_ddrc_rdwr_idle_gap = 0x1 - // .. .. ==> 0XF8006000[13:7] = 0x00000001U - // .. .. ==> MASK : 0x00003F80U VAL : 0x00000080U - // .. .. reg_ddrc_dis_rd_bypass = 0x0 - // .. .. ==> 0XF8006000[14:14] = 0x00000000U - // .. .. ==> MASK : 0x00004000U VAL : 0x00000000U - // .. .. reg_ddrc_dis_act_bypass = 0x0 - // .. .. ==> 0XF8006000[15:15] = 0x00000000U - // .. .. ==> MASK : 0x00008000U VAL : 0x00000000U - // .. .. reg_ddrc_dis_auto_refresh = 0x0 - // .. .. ==> 0XF8006000[16:16] = 0x00000000U - // .. .. ==> MASK : 0x00010000U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006000, 0x0001FFFFU ,0x00000080U), - // .. .. FINISH: LOCK DDR - // .. .. reg_ddrc_t_rfc_nom_x32 = 0x81 - // .. .. ==> 0XF8006004[11:0] = 0x00000081U - // .. .. ==> MASK : 0x00000FFFU VAL : 0x00000081U - // .. .. reserved_reg_ddrc_active_ranks = 0x1 - // .. .. ==> 0XF8006004[13:12] = 0x00000001U - // .. .. ==> MASK : 0x00003000U VAL : 0x00001000U - // .. .. reg_ddrc_addrmap_cs_bit0 = 0x0 - // .. .. ==> 0XF8006004[18:14] = 0x00000000U - // .. .. ==> MASK : 0x0007C000U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006004, 0x0007FFFFU ,0x00001081U), - // .. .. reg_ddrc_hpr_min_non_critical_x32 = 0xf - // .. .. ==> 0XF8006008[10:0] = 0x0000000FU - // .. .. ==> MASK : 0x000007FFU VAL : 0x0000000FU - // .. .. reg_ddrc_hpr_max_starve_x32 = 0xf - // .. .. ==> 0XF8006008[21:11] = 0x0000000FU - // .. .. ==> MASK : 0x003FF800U VAL : 0x00007800U - // .. .. reg_ddrc_hpr_xact_run_length = 0xf - // .. .. ==> 0XF8006008[25:22] = 0x0000000FU - // .. .. ==> MASK : 0x03C00000U VAL : 0x03C00000U - // .. .. - EMIT_MASKWRITE(0XF8006008, 0x03FFFFFFU ,0x03C0780FU), - // .. .. reg_ddrc_lpr_min_non_critical_x32 = 0x1 - // .. .. ==> 0XF800600C[10:0] = 0x00000001U - // .. .. ==> MASK : 0x000007FFU VAL : 0x00000001U - // .. .. reg_ddrc_lpr_max_starve_x32 = 0x2 - // .. .. ==> 0XF800600C[21:11] = 0x00000002U - // .. .. ==> MASK : 0x003FF800U VAL : 0x00001000U - // .. .. reg_ddrc_lpr_xact_run_length = 0x8 - // .. .. ==> 0XF800600C[25:22] = 0x00000008U - // .. .. ==> MASK : 0x03C00000U VAL : 0x02000000U - // .. .. - EMIT_MASKWRITE(0XF800600C, 0x03FFFFFFU ,0x02001001U), - // .. .. reg_ddrc_w_min_non_critical_x32 = 0x1 - // .. .. ==> 0XF8006010[10:0] = 0x00000001U - // .. .. ==> MASK : 0x000007FFU VAL : 0x00000001U - // .. .. reg_ddrc_w_xact_run_length = 0x8 - // .. .. ==> 0XF8006010[14:11] = 0x00000008U - // .. .. ==> MASK : 0x00007800U VAL : 0x00004000U - // .. .. reg_ddrc_w_max_starve_x32 = 0x2 - // .. .. ==> 0XF8006010[25:15] = 0x00000002U - // .. .. ==> MASK : 0x03FF8000U VAL : 0x00010000U - // .. .. - EMIT_MASKWRITE(0XF8006010, 0x03FFFFFFU ,0x00014001U), - // .. .. reg_ddrc_t_rc = 0x1a - // .. .. ==> 0XF8006014[5:0] = 0x0000001AU - // .. .. ==> MASK : 0x0000003FU VAL : 0x0000001AU - // .. .. reg_ddrc_t_rfc_min = 0xa0 - // .. .. ==> 0XF8006014[13:6] = 0x000000A0U - // .. .. ==> MASK : 0x00003FC0U VAL : 0x00002800U - // .. .. reg_ddrc_post_selfref_gap_x32 = 0x10 - // .. .. ==> 0XF8006014[20:14] = 0x00000010U - // .. .. ==> MASK : 0x001FC000U VAL : 0x00040000U - // .. .. - EMIT_MASKWRITE(0XF8006014, 0x001FFFFFU ,0x0004281AU), - // .. .. reg_ddrc_wr2pre = 0x12 - // .. .. ==> 0XF8006018[4:0] = 0x00000012U - // .. .. ==> MASK : 0x0000001FU VAL : 0x00000012U - // .. .. reg_ddrc_powerdown_to_x32 = 0x6 - // .. .. ==> 0XF8006018[9:5] = 0x00000006U - // .. .. ==> MASK : 0x000003E0U VAL : 0x000000C0U - // .. .. reg_ddrc_t_faw = 0x16 - // .. .. ==> 0XF8006018[15:10] = 0x00000016U - // .. .. ==> MASK : 0x0000FC00U VAL : 0x00005800U - // .. .. reg_ddrc_t_ras_max = 0x24 - // .. .. ==> 0XF8006018[21:16] = 0x00000024U - // .. .. ==> MASK : 0x003F0000U VAL : 0x00240000U - // .. .. reg_ddrc_t_ras_min = 0x13 - // .. .. ==> 0XF8006018[26:22] = 0x00000013U - // .. .. ==> MASK : 0x07C00000U VAL : 0x04C00000U - // .. .. reg_ddrc_t_cke = 0x4 - // .. .. ==> 0XF8006018[31:28] = 0x00000004U - // .. .. ==> MASK : 0xF0000000U VAL : 0x40000000U - // .. .. - EMIT_MASKWRITE(0XF8006018, 0xF7FFFFFFU ,0x44E458D2U), - // .. .. reg_ddrc_write_latency = 0x5 - // .. .. ==> 0XF800601C[4:0] = 0x00000005U - // .. .. ==> MASK : 0x0000001FU VAL : 0x00000005U - // .. .. reg_ddrc_rd2wr = 0x7 - // .. .. ==> 0XF800601C[9:5] = 0x00000007U - // .. .. ==> MASK : 0x000003E0U VAL : 0x000000E0U - // .. .. reg_ddrc_wr2rd = 0xe - // .. .. ==> 0XF800601C[14:10] = 0x0000000EU - // .. .. ==> MASK : 0x00007C00U VAL : 0x00003800U - // .. .. reg_ddrc_t_xp = 0x4 - // .. .. ==> 0XF800601C[19:15] = 0x00000004U - // .. .. ==> MASK : 0x000F8000U VAL : 0x00020000U - // .. .. reg_ddrc_pad_pd = 0x0 - // .. .. ==> 0XF800601C[22:20] = 0x00000000U - // .. .. ==> MASK : 0x00700000U VAL : 0x00000000U - // .. .. reg_ddrc_rd2pre = 0x4 - // .. .. ==> 0XF800601C[27:23] = 0x00000004U - // .. .. ==> MASK : 0x0F800000U VAL : 0x02000000U - // .. .. reg_ddrc_t_rcd = 0x7 - // .. .. ==> 0XF800601C[31:28] = 0x00000007U - // .. .. ==> MASK : 0xF0000000U VAL : 0x70000000U - // .. .. - EMIT_MASKWRITE(0XF800601C, 0xFFFFFFFFU ,0x720238E5U), - // .. .. reg_ddrc_t_ccd = 0x4 - // .. .. ==> 0XF8006020[4:2] = 0x00000004U - // .. .. ==> MASK : 0x0000001CU VAL : 0x00000010U - // .. .. reg_ddrc_t_rrd = 0x6 - // .. .. ==> 0XF8006020[7:5] = 0x00000006U - // .. .. ==> MASK : 0x000000E0U VAL : 0x000000C0U - // .. .. reg_ddrc_refresh_margin = 0x2 - // .. .. ==> 0XF8006020[11:8] = 0x00000002U - // .. .. ==> MASK : 0x00000F00U VAL : 0x00000200U - // .. .. reg_ddrc_t_rp = 0x7 - // .. .. ==> 0XF8006020[15:12] = 0x00000007U - // .. .. ==> MASK : 0x0000F000U VAL : 0x00007000U - // .. .. reg_ddrc_refresh_to_x32 = 0x8 - // .. .. ==> 0XF8006020[20:16] = 0x00000008U - // .. .. ==> MASK : 0x001F0000U VAL : 0x00080000U - // .. .. reg_ddrc_mobile = 0x0 - // .. .. ==> 0XF8006020[22:22] = 0x00000000U - // .. .. ==> MASK : 0x00400000U VAL : 0x00000000U - // .. .. reg_ddrc_en_dfi_dram_clk_disable = 0x0 - // .. .. ==> 0XF8006020[23:23] = 0x00000000U - // .. .. ==> MASK : 0x00800000U VAL : 0x00000000U - // .. .. reg_ddrc_read_latency = 0x7 - // .. .. ==> 0XF8006020[28:24] = 0x00000007U - // .. .. ==> MASK : 0x1F000000U VAL : 0x07000000U - // .. .. reg_phy_mode_ddr1_ddr2 = 0x1 - // .. .. ==> 0XF8006020[29:29] = 0x00000001U - // .. .. ==> MASK : 0x20000000U VAL : 0x20000000U - // .. .. reg_ddrc_dis_pad_pd = 0x0 - // .. .. ==> 0XF8006020[30:30] = 0x00000000U - // .. .. ==> MASK : 0x40000000U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006020, 0x7FDFFFFCU ,0x270872D0U), - // .. .. reg_ddrc_en_2t_timing_mode = 0x0 - // .. .. ==> 0XF8006024[0:0] = 0x00000000U - // .. .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. .. reg_ddrc_prefer_write = 0x0 - // .. .. ==> 0XF8006024[1:1] = 0x00000000U - // .. .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. .. reg_ddrc_mr_wr = 0x0 - // .. .. ==> 0XF8006024[6:6] = 0x00000000U - // .. .. ==> MASK : 0x00000040U VAL : 0x00000000U - // .. .. reg_ddrc_mr_addr = 0x0 - // .. .. ==> 0XF8006024[8:7] = 0x00000000U - // .. .. ==> MASK : 0x00000180U VAL : 0x00000000U - // .. .. reg_ddrc_mr_data = 0x0 - // .. .. ==> 0XF8006024[24:9] = 0x00000000U - // .. .. ==> MASK : 0x01FFFE00U VAL : 0x00000000U - // .. .. ddrc_reg_mr_wr_busy = 0x0 - // .. .. ==> 0XF8006024[25:25] = 0x00000000U - // .. .. ==> MASK : 0x02000000U VAL : 0x00000000U - // .. .. reg_ddrc_mr_type = 0x0 - // .. .. ==> 0XF8006024[26:26] = 0x00000000U - // .. .. ==> MASK : 0x04000000U VAL : 0x00000000U - // .. .. reg_ddrc_mr_rdata_valid = 0x0 - // .. .. ==> 0XF8006024[27:27] = 0x00000000U - // .. .. ==> MASK : 0x08000000U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006024, 0x0FFFFFC3U ,0x00000000U), - // .. .. reg_ddrc_final_wait_x32 = 0x7 - // .. .. ==> 0XF8006028[6:0] = 0x00000007U - // .. .. ==> MASK : 0x0000007FU VAL : 0x00000007U - // .. .. reg_ddrc_pre_ocd_x32 = 0x0 - // .. .. ==> 0XF8006028[10:7] = 0x00000000U - // .. .. ==> MASK : 0x00000780U VAL : 0x00000000U - // .. .. reg_ddrc_t_mrd = 0x4 - // .. .. ==> 0XF8006028[13:11] = 0x00000004U - // .. .. ==> MASK : 0x00003800U VAL : 0x00002000U - // .. .. - EMIT_MASKWRITE(0XF8006028, 0x00003FFFU ,0x00002007U), - // .. .. reg_ddrc_emr2 = 0x8 - // .. .. ==> 0XF800602C[15:0] = 0x00000008U - // .. .. ==> MASK : 0x0000FFFFU VAL : 0x00000008U - // .. .. reg_ddrc_emr3 = 0x0 - // .. .. ==> 0XF800602C[31:16] = 0x00000000U - // .. .. ==> MASK : 0xFFFF0000U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF800602C, 0xFFFFFFFFU ,0x00000008U), - // .. .. reg_ddrc_mr = 0x930 - // .. .. ==> 0XF8006030[15:0] = 0x00000930U - // .. .. ==> MASK : 0x0000FFFFU VAL : 0x00000930U - // .. .. reg_ddrc_emr = 0x4 - // .. .. ==> 0XF8006030[31:16] = 0x00000004U - // .. .. ==> MASK : 0xFFFF0000U VAL : 0x00040000U - // .. .. - EMIT_MASKWRITE(0XF8006030, 0xFFFFFFFFU ,0x00040930U), - // .. .. reg_ddrc_burst_rdwr = 0x4 - // .. .. ==> 0XF8006034[3:0] = 0x00000004U - // .. .. ==> MASK : 0x0000000FU VAL : 0x00000004U - // .. .. reg_ddrc_pre_cke_x1024 = 0x105 - // .. .. ==> 0XF8006034[13:4] = 0x00000105U - // .. .. ==> MASK : 0x00003FF0U VAL : 0x00001050U - // .. .. reg_ddrc_post_cke_x1024 = 0x1 - // .. .. ==> 0XF8006034[25:16] = 0x00000001U - // .. .. ==> MASK : 0x03FF0000U VAL : 0x00010000U - // .. .. reg_ddrc_burstchop = 0x0 - // .. .. ==> 0XF8006034[28:28] = 0x00000000U - // .. .. ==> MASK : 0x10000000U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006034, 0x13FF3FFFU ,0x00011054U), - // .. .. reg_ddrc_force_low_pri_n = 0x0 - // .. .. ==> 0XF8006038[0:0] = 0x00000000U - // .. .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. .. reg_ddrc_dis_dq = 0x0 - // .. .. ==> 0XF8006038[1:1] = 0x00000000U - // .. .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006038, 0x00000003U ,0x00000000U), - // .. .. reg_ddrc_addrmap_bank_b0 = 0x7 - // .. .. ==> 0XF800603C[3:0] = 0x00000007U - // .. .. ==> MASK : 0x0000000FU VAL : 0x00000007U - // .. .. reg_ddrc_addrmap_bank_b1 = 0x7 - // .. .. ==> 0XF800603C[7:4] = 0x00000007U - // .. .. ==> MASK : 0x000000F0U VAL : 0x00000070U - // .. .. reg_ddrc_addrmap_bank_b2 = 0x7 - // .. .. ==> 0XF800603C[11:8] = 0x00000007U - // .. .. ==> MASK : 0x00000F00U VAL : 0x00000700U - // .. .. reg_ddrc_addrmap_col_b5 = 0x0 - // .. .. ==> 0XF800603C[15:12] = 0x00000000U - // .. .. ==> MASK : 0x0000F000U VAL : 0x00000000U - // .. .. reg_ddrc_addrmap_col_b6 = 0x0 - // .. .. ==> 0XF800603C[19:16] = 0x00000000U - // .. .. ==> MASK : 0x000F0000U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF800603C, 0x000FFFFFU ,0x00000777U), - // .. .. reg_ddrc_addrmap_col_b2 = 0x0 - // .. .. ==> 0XF8006040[3:0] = 0x00000000U - // .. .. ==> MASK : 0x0000000FU VAL : 0x00000000U - // .. .. reg_ddrc_addrmap_col_b3 = 0x0 - // .. .. ==> 0XF8006040[7:4] = 0x00000000U - // .. .. ==> MASK : 0x000000F0U VAL : 0x00000000U - // .. .. reg_ddrc_addrmap_col_b4 = 0x0 - // .. .. ==> 0XF8006040[11:8] = 0x00000000U - // .. .. ==> MASK : 0x00000F00U VAL : 0x00000000U - // .. .. reg_ddrc_addrmap_col_b7 = 0x0 - // .. .. ==> 0XF8006040[15:12] = 0x00000000U - // .. .. ==> MASK : 0x0000F000U VAL : 0x00000000U - // .. .. reg_ddrc_addrmap_col_b8 = 0x0 - // .. .. ==> 0XF8006040[19:16] = 0x00000000U - // .. .. ==> MASK : 0x000F0000U VAL : 0x00000000U - // .. .. reg_ddrc_addrmap_col_b9 = 0xf - // .. .. ==> 0XF8006040[23:20] = 0x0000000FU - // .. .. ==> MASK : 0x00F00000U VAL : 0x00F00000U - // .. .. reg_ddrc_addrmap_col_b10 = 0xf - // .. .. ==> 0XF8006040[27:24] = 0x0000000FU - // .. .. ==> MASK : 0x0F000000U VAL : 0x0F000000U - // .. .. reg_ddrc_addrmap_col_b11 = 0xf - // .. .. ==> 0XF8006040[31:28] = 0x0000000FU - // .. .. ==> MASK : 0xF0000000U VAL : 0xF0000000U - // .. .. - EMIT_MASKWRITE(0XF8006040, 0xFFFFFFFFU ,0xFFF00000U), - // .. .. reg_ddrc_addrmap_row_b0 = 0x6 - // .. .. ==> 0XF8006044[3:0] = 0x00000006U - // .. .. ==> MASK : 0x0000000FU VAL : 0x00000006U - // .. .. reg_ddrc_addrmap_row_b1 = 0x6 - // .. .. ==> 0XF8006044[7:4] = 0x00000006U - // .. .. ==> MASK : 0x000000F0U VAL : 0x00000060U - // .. .. reg_ddrc_addrmap_row_b2_11 = 0x6 - // .. .. ==> 0XF8006044[11:8] = 0x00000006U - // .. .. ==> MASK : 0x00000F00U VAL : 0x00000600U - // .. .. reg_ddrc_addrmap_row_b12 = 0x6 - // .. .. ==> 0XF8006044[15:12] = 0x00000006U - // .. .. ==> MASK : 0x0000F000U VAL : 0x00006000U - // .. .. reg_ddrc_addrmap_row_b13 = 0x6 - // .. .. ==> 0XF8006044[19:16] = 0x00000006U - // .. .. ==> MASK : 0x000F0000U VAL : 0x00060000U - // .. .. reg_ddrc_addrmap_row_b14 = 0x6 - // .. .. ==> 0XF8006044[23:20] = 0x00000006U - // .. .. ==> MASK : 0x00F00000U VAL : 0x00600000U - // .. .. reg_ddrc_addrmap_row_b15 = 0xf - // .. .. ==> 0XF8006044[27:24] = 0x0000000FU - // .. .. ==> MASK : 0x0F000000U VAL : 0x0F000000U - // .. .. - EMIT_MASKWRITE(0XF8006044, 0x0FFFFFFFU ,0x0F666666U), - // .. .. reg_phy_rd_local_odt = 0x0 - // .. .. ==> 0XF8006048[13:12] = 0x00000000U - // .. .. ==> MASK : 0x00003000U VAL : 0x00000000U - // .. .. reg_phy_wr_local_odt = 0x3 - // .. .. ==> 0XF8006048[15:14] = 0x00000003U - // .. .. ==> MASK : 0x0000C000U VAL : 0x0000C000U - // .. .. reg_phy_idle_local_odt = 0x3 - // .. .. ==> 0XF8006048[17:16] = 0x00000003U - // .. .. ==> MASK : 0x00030000U VAL : 0x00030000U - // .. .. reserved_reg_ddrc_rank0_wr_odt = 0x1 - // .. .. ==> 0XF8006048[5:3] = 0x00000001U - // .. .. ==> MASK : 0x00000038U VAL : 0x00000008U - // .. .. reserved_reg_ddrc_rank0_rd_odt = 0x0 - // .. .. ==> 0XF8006048[2:0] = 0x00000000U - // .. .. ==> MASK : 0x00000007U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006048, 0x0003F03FU ,0x0003C008U), - // .. .. reg_phy_rd_cmd_to_data = 0x0 - // .. .. ==> 0XF8006050[3:0] = 0x00000000U - // .. .. ==> MASK : 0x0000000FU VAL : 0x00000000U - // .. .. reg_phy_wr_cmd_to_data = 0x0 - // .. .. ==> 0XF8006050[7:4] = 0x00000000U - // .. .. ==> MASK : 0x000000F0U VAL : 0x00000000U - // .. .. reg_phy_rdc_we_to_re_delay = 0x8 - // .. .. ==> 0XF8006050[11:8] = 0x00000008U - // .. .. ==> MASK : 0x00000F00U VAL : 0x00000800U - // .. .. reg_phy_rdc_fifo_rst_disable = 0x0 - // .. .. ==> 0XF8006050[15:15] = 0x00000000U - // .. .. ==> MASK : 0x00008000U VAL : 0x00000000U - // .. .. reg_phy_use_fixed_re = 0x1 - // .. .. ==> 0XF8006050[16:16] = 0x00000001U - // .. .. ==> MASK : 0x00010000U VAL : 0x00010000U - // .. .. reg_phy_rdc_fifo_rst_err_cnt_clr = 0x0 - // .. .. ==> 0XF8006050[17:17] = 0x00000000U - // .. .. ==> MASK : 0x00020000U VAL : 0x00000000U - // .. .. reg_phy_dis_phy_ctrl_rstn = 0x0 - // .. .. ==> 0XF8006050[18:18] = 0x00000000U - // .. .. ==> MASK : 0x00040000U VAL : 0x00000000U - // .. .. reg_phy_clk_stall_level = 0x0 - // .. .. ==> 0XF8006050[19:19] = 0x00000000U - // .. .. ==> MASK : 0x00080000U VAL : 0x00000000U - // .. .. reg_phy_gatelvl_num_of_dq0 = 0x7 - // .. .. ==> 0XF8006050[27:24] = 0x00000007U - // .. .. ==> MASK : 0x0F000000U VAL : 0x07000000U - // .. .. reg_phy_wrlvl_num_of_dq0 = 0x7 - // .. .. ==> 0XF8006050[31:28] = 0x00000007U - // .. .. ==> MASK : 0xF0000000U VAL : 0x70000000U - // .. .. - EMIT_MASKWRITE(0XF8006050, 0xFF0F8FFFU ,0x77010800U), - // .. .. reg_ddrc_dis_dll_calib = 0x0 - // .. .. ==> 0XF8006058[16:16] = 0x00000000U - // .. .. ==> MASK : 0x00010000U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006058, 0x00010000U ,0x00000000U), - // .. .. reg_ddrc_rd_odt_delay = 0x3 - // .. .. ==> 0XF800605C[3:0] = 0x00000003U - // .. .. ==> MASK : 0x0000000FU VAL : 0x00000003U - // .. .. reg_ddrc_wr_odt_delay = 0x0 - // .. .. ==> 0XF800605C[7:4] = 0x00000000U - // .. .. ==> MASK : 0x000000F0U VAL : 0x00000000U - // .. .. reg_ddrc_rd_odt_hold = 0x0 - // .. .. ==> 0XF800605C[11:8] = 0x00000000U - // .. .. ==> MASK : 0x00000F00U VAL : 0x00000000U - // .. .. reg_ddrc_wr_odt_hold = 0x5 - // .. .. ==> 0XF800605C[15:12] = 0x00000005U - // .. .. ==> MASK : 0x0000F000U VAL : 0x00005000U - // .. .. - EMIT_MASKWRITE(0XF800605C, 0x0000FFFFU ,0x00005003U), - // .. .. reg_ddrc_pageclose = 0x0 - // .. .. ==> 0XF8006060[0:0] = 0x00000000U - // .. .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. .. reg_ddrc_lpr_num_entries = 0x1f - // .. .. ==> 0XF8006060[6:1] = 0x0000001FU - // .. .. ==> MASK : 0x0000007EU VAL : 0x0000003EU - // .. .. reg_ddrc_auto_pre_en = 0x0 - // .. .. ==> 0XF8006060[7:7] = 0x00000000U - // .. .. ==> MASK : 0x00000080U VAL : 0x00000000U - // .. .. reg_ddrc_refresh_update_level = 0x0 - // .. .. ==> 0XF8006060[8:8] = 0x00000000U - // .. .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. .. reg_ddrc_dis_wc = 0x0 - // .. .. ==> 0XF8006060[9:9] = 0x00000000U - // .. .. ==> MASK : 0x00000200U VAL : 0x00000000U - // .. .. reg_ddrc_dis_collision_page_opt = 0x0 - // .. .. ==> 0XF8006060[10:10] = 0x00000000U - // .. .. ==> MASK : 0x00000400U VAL : 0x00000000U - // .. .. reg_ddrc_selfref_en = 0x0 - // .. .. ==> 0XF8006060[12:12] = 0x00000000U - // .. .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006060, 0x000017FFU ,0x0000003EU), - // .. .. reg_ddrc_go2critical_hysteresis = 0x0 - // .. .. ==> 0XF8006064[12:5] = 0x00000000U - // .. .. ==> MASK : 0x00001FE0U VAL : 0x00000000U - // .. .. reg_arb_go2critical_en = 0x1 - // .. .. ==> 0XF8006064[17:17] = 0x00000001U - // .. .. ==> MASK : 0x00020000U VAL : 0x00020000U - // .. .. - EMIT_MASKWRITE(0XF8006064, 0x00021FE0U ,0x00020000U), - // .. .. reg_ddrc_wrlvl_ww = 0x41 - // .. .. ==> 0XF8006068[7:0] = 0x00000041U - // .. .. ==> MASK : 0x000000FFU VAL : 0x00000041U - // .. .. reg_ddrc_rdlvl_rr = 0x41 - // .. .. ==> 0XF8006068[15:8] = 0x00000041U - // .. .. ==> MASK : 0x0000FF00U VAL : 0x00004100U - // .. .. reg_ddrc_dfi_t_wlmrd = 0x28 - // .. .. ==> 0XF8006068[25:16] = 0x00000028U - // .. .. ==> MASK : 0x03FF0000U VAL : 0x00280000U - // .. .. - EMIT_MASKWRITE(0XF8006068, 0x03FFFFFFU ,0x00284141U), - // .. .. dfi_t_ctrlupd_interval_min_x1024 = 0x10 - // .. .. ==> 0XF800606C[7:0] = 0x00000010U - // .. .. ==> MASK : 0x000000FFU VAL : 0x00000010U - // .. .. dfi_t_ctrlupd_interval_max_x1024 = 0x16 - // .. .. ==> 0XF800606C[15:8] = 0x00000016U - // .. .. ==> MASK : 0x0000FF00U VAL : 0x00001600U - // .. .. - EMIT_MASKWRITE(0XF800606C, 0x0000FFFFU ,0x00001610U), - // .. .. reg_ddrc_dfi_t_ctrl_delay = 0x1 - // .. .. ==> 0XF8006078[3:0] = 0x00000001U - // .. .. ==> MASK : 0x0000000FU VAL : 0x00000001U - // .. .. reg_ddrc_dfi_t_dram_clk_disable = 0x1 - // .. .. ==> 0XF8006078[7:4] = 0x00000001U - // .. .. ==> MASK : 0x000000F0U VAL : 0x00000010U - // .. .. reg_ddrc_dfi_t_dram_clk_enable = 0x1 - // .. .. ==> 0XF8006078[11:8] = 0x00000001U - // .. .. ==> MASK : 0x00000F00U VAL : 0x00000100U - // .. .. reg_ddrc_t_cksre = 0x6 - // .. .. ==> 0XF8006078[15:12] = 0x00000006U - // .. .. ==> MASK : 0x0000F000U VAL : 0x00006000U - // .. .. reg_ddrc_t_cksrx = 0x6 - // .. .. ==> 0XF8006078[19:16] = 0x00000006U - // .. .. ==> MASK : 0x000F0000U VAL : 0x00060000U - // .. .. reg_ddrc_t_ckesr = 0x4 - // .. .. ==> 0XF8006078[25:20] = 0x00000004U - // .. .. ==> MASK : 0x03F00000U VAL : 0x00400000U - // .. .. - EMIT_MASKWRITE(0XF8006078, 0x03FFFFFFU ,0x00466111U), - // .. .. reg_ddrc_t_ckpde = 0x2 - // .. .. ==> 0XF800607C[3:0] = 0x00000002U - // .. .. ==> MASK : 0x0000000FU VAL : 0x00000002U - // .. .. reg_ddrc_t_ckpdx = 0x2 - // .. .. ==> 0XF800607C[7:4] = 0x00000002U - // .. .. ==> MASK : 0x000000F0U VAL : 0x00000020U - // .. .. reg_ddrc_t_ckdpde = 0x2 - // .. .. ==> 0XF800607C[11:8] = 0x00000002U - // .. .. ==> MASK : 0x00000F00U VAL : 0x00000200U - // .. .. reg_ddrc_t_ckdpdx = 0x2 - // .. .. ==> 0XF800607C[15:12] = 0x00000002U - // .. .. ==> MASK : 0x0000F000U VAL : 0x00002000U - // .. .. reg_ddrc_t_ckcsx = 0x3 - // .. .. ==> 0XF800607C[19:16] = 0x00000003U - // .. .. ==> MASK : 0x000F0000U VAL : 0x00030000U - // .. .. - EMIT_MASKWRITE(0XF800607C, 0x000FFFFFU ,0x00032222U), - // .. .. reg_ddrc_dis_auto_zq = 0x0 - // .. .. ==> 0XF80060A4[0:0] = 0x00000000U - // .. .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. .. reg_ddrc_ddr3 = 0x1 - // .. .. ==> 0XF80060A4[1:1] = 0x00000001U - // .. .. ==> MASK : 0x00000002U VAL : 0x00000002U - // .. .. reg_ddrc_t_mod = 0x200 - // .. .. ==> 0XF80060A4[11:2] = 0x00000200U - // .. .. ==> MASK : 0x00000FFCU VAL : 0x00000800U - // .. .. reg_ddrc_t_zq_long_nop = 0x200 - // .. .. ==> 0XF80060A4[21:12] = 0x00000200U - // .. .. ==> MASK : 0x003FF000U VAL : 0x00200000U - // .. .. reg_ddrc_t_zq_short_nop = 0x40 - // .. .. ==> 0XF80060A4[31:22] = 0x00000040U - // .. .. ==> MASK : 0xFFC00000U VAL : 0x10000000U - // .. .. - EMIT_MASKWRITE(0XF80060A4, 0xFFFFFFFFU ,0x10200802U), - // .. .. t_zq_short_interval_x1024 = 0xcb73 - // .. .. ==> 0XF80060A8[19:0] = 0x0000CB73U - // .. .. ==> MASK : 0x000FFFFFU VAL : 0x0000CB73U - // .. .. dram_rstn_x1024 = 0x69 - // .. .. ==> 0XF80060A8[27:20] = 0x00000069U - // .. .. ==> MASK : 0x0FF00000U VAL : 0x06900000U - // .. .. - EMIT_MASKWRITE(0XF80060A8, 0x0FFFFFFFU ,0x0690CB73U), - // .. .. deeppowerdown_en = 0x0 - // .. .. ==> 0XF80060AC[0:0] = 0x00000000U - // .. .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. .. deeppowerdown_to_x1024 = 0xff - // .. .. ==> 0XF80060AC[8:1] = 0x000000FFU - // .. .. ==> MASK : 0x000001FEU VAL : 0x000001FEU - // .. .. - EMIT_MASKWRITE(0XF80060AC, 0x000001FFU ,0x000001FEU), - // .. .. dfi_wrlvl_max_x1024 = 0xfff - // .. .. ==> 0XF80060B0[11:0] = 0x00000FFFU - // .. .. ==> MASK : 0x00000FFFU VAL : 0x00000FFFU - // .. .. dfi_rdlvl_max_x1024 = 0xfff - // .. .. ==> 0XF80060B0[23:12] = 0x00000FFFU - // .. .. ==> MASK : 0x00FFF000U VAL : 0x00FFF000U - // .. .. ddrc_reg_twrlvl_max_error = 0x0 - // .. .. ==> 0XF80060B0[24:24] = 0x00000000U - // .. .. ==> MASK : 0x01000000U VAL : 0x00000000U - // .. .. ddrc_reg_trdlvl_max_error = 0x0 - // .. .. ==> 0XF80060B0[25:25] = 0x00000000U - // .. .. ==> MASK : 0x02000000U VAL : 0x00000000U - // .. .. reg_ddrc_dfi_wr_level_en = 0x1 - // .. .. ==> 0XF80060B0[26:26] = 0x00000001U - // .. .. ==> MASK : 0x04000000U VAL : 0x04000000U - // .. .. reg_ddrc_dfi_rd_dqs_gate_level = 0x1 - // .. .. ==> 0XF80060B0[27:27] = 0x00000001U - // .. .. ==> MASK : 0x08000000U VAL : 0x08000000U - // .. .. reg_ddrc_dfi_rd_data_eye_train = 0x1 - // .. .. ==> 0XF80060B0[28:28] = 0x00000001U - // .. .. ==> MASK : 0x10000000U VAL : 0x10000000U - // .. .. - EMIT_MASKWRITE(0XF80060B0, 0x1FFFFFFFU ,0x1CFFFFFFU), - // .. .. reg_ddrc_skip_ocd = 0x1 - // .. .. ==> 0XF80060B4[9:9] = 0x00000001U - // .. .. ==> MASK : 0x00000200U VAL : 0x00000200U - // .. .. - EMIT_MASKWRITE(0XF80060B4, 0x00000200U ,0x00000200U), - // .. .. reg_ddrc_dfi_t_rddata_en = 0x6 - // .. .. ==> 0XF80060B8[4:0] = 0x00000006U - // .. .. ==> MASK : 0x0000001FU VAL : 0x00000006U - // .. .. reg_ddrc_dfi_t_ctrlup_min = 0x3 - // .. .. ==> 0XF80060B8[14:5] = 0x00000003U - // .. .. ==> MASK : 0x00007FE0U VAL : 0x00000060U - // .. .. reg_ddrc_dfi_t_ctrlup_max = 0x40 - // .. .. ==> 0XF80060B8[24:15] = 0x00000040U - // .. .. ==> MASK : 0x01FF8000U VAL : 0x00200000U - // .. .. - EMIT_MASKWRITE(0XF80060B8, 0x01FFFFFFU ,0x00200066U), - // .. .. START: RESET ECC ERROR - // .. .. Clear_Uncorrectable_DRAM_ECC_error = 1 - // .. .. ==> 0XF80060C4[0:0] = 0x00000001U - // .. .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. .. Clear_Correctable_DRAM_ECC_error = 1 - // .. .. ==> 0XF80060C4[1:1] = 0x00000001U - // .. .. ==> MASK : 0x00000002U VAL : 0x00000002U - // .. .. - EMIT_MASKWRITE(0XF80060C4, 0x00000003U ,0x00000003U), - // .. .. FINISH: RESET ECC ERROR - // .. .. Clear_Uncorrectable_DRAM_ECC_error = 0x0 - // .. .. ==> 0XF80060C4[0:0] = 0x00000000U - // .. .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. .. Clear_Correctable_DRAM_ECC_error = 0x0 - // .. .. ==> 0XF80060C4[1:1] = 0x00000000U - // .. .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF80060C4, 0x00000003U ,0x00000000U), - // .. .. CORR_ECC_LOG_VALID = 0x0 - // .. .. ==> 0XF80060C8[0:0] = 0x00000000U - // .. .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. .. ECC_CORRECTED_BIT_NUM = 0x0 - // .. .. ==> 0XF80060C8[7:1] = 0x00000000U - // .. .. ==> MASK : 0x000000FEU VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF80060C8, 0x000000FFU ,0x00000000U), - // .. .. UNCORR_ECC_LOG_VALID = 0x0 - // .. .. ==> 0XF80060DC[0:0] = 0x00000000U - // .. .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF80060DC, 0x00000001U ,0x00000000U), - // .. .. STAT_NUM_CORR_ERR = 0x0 - // .. .. ==> 0XF80060F0[15:8] = 0x00000000U - // .. .. ==> MASK : 0x0000FF00U VAL : 0x00000000U - // .. .. STAT_NUM_UNCORR_ERR = 0x0 - // .. .. ==> 0XF80060F0[7:0] = 0x00000000U - // .. .. ==> MASK : 0x000000FFU VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF80060F0, 0x0000FFFFU ,0x00000000U), - // .. .. reg_ddrc_ecc_mode = 0x0 - // .. .. ==> 0XF80060F4[2:0] = 0x00000000U - // .. .. ==> MASK : 0x00000007U VAL : 0x00000000U - // .. .. reg_ddrc_dis_scrub = 0x1 - // .. .. ==> 0XF80060F4[3:3] = 0x00000001U - // .. .. ==> MASK : 0x00000008U VAL : 0x00000008U - // .. .. - EMIT_MASKWRITE(0XF80060F4, 0x0000000FU ,0x00000008U), - // .. .. reg_phy_dif_on = 0x0 - // .. .. ==> 0XF8006114[3:0] = 0x00000000U - // .. .. ==> MASK : 0x0000000FU VAL : 0x00000000U - // .. .. reg_phy_dif_off = 0x0 - // .. .. ==> 0XF8006114[7:4] = 0x00000000U - // .. .. ==> MASK : 0x000000F0U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006114, 0x000000FFU ,0x00000000U), - // .. .. reg_phy_data_slice_in_use = 0x1 - // .. .. ==> 0XF8006118[0:0] = 0x00000001U - // .. .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. .. reg_phy_rdlvl_inc_mode = 0x0 - // .. .. ==> 0XF8006118[1:1] = 0x00000000U - // .. .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. .. reg_phy_gatelvl_inc_mode = 0x0 - // .. .. ==> 0XF8006118[2:2] = 0x00000000U - // .. .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. .. reg_phy_wrlvl_inc_mode = 0x0 - // .. .. ==> 0XF8006118[3:3] = 0x00000000U - // .. .. ==> MASK : 0x00000008U VAL : 0x00000000U - // .. .. reg_phy_bist_shift_dq = 0x0 - // .. .. ==> 0XF8006118[14:6] = 0x00000000U - // .. .. ==> MASK : 0x00007FC0U VAL : 0x00000000U - // .. .. reg_phy_bist_err_clr = 0x0 - // .. .. ==> 0XF8006118[23:15] = 0x00000000U - // .. .. ==> MASK : 0x00FF8000U VAL : 0x00000000U - // .. .. reg_phy_dq_offset = 0x40 - // .. .. ==> 0XF8006118[30:24] = 0x00000040U - // .. .. ==> MASK : 0x7F000000U VAL : 0x40000000U - // .. .. - EMIT_MASKWRITE(0XF8006118, 0x7FFFFFCFU ,0x40000001U), - // .. .. reg_phy_data_slice_in_use = 0x1 - // .. .. ==> 0XF800611C[0:0] = 0x00000001U - // .. .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. .. reg_phy_rdlvl_inc_mode = 0x0 - // .. .. ==> 0XF800611C[1:1] = 0x00000000U - // .. .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. .. reg_phy_gatelvl_inc_mode = 0x0 - // .. .. ==> 0XF800611C[2:2] = 0x00000000U - // .. .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. .. reg_phy_wrlvl_inc_mode = 0x0 - // .. .. ==> 0XF800611C[3:3] = 0x00000000U - // .. .. ==> MASK : 0x00000008U VAL : 0x00000000U - // .. .. reg_phy_bist_shift_dq = 0x0 - // .. .. ==> 0XF800611C[14:6] = 0x00000000U - // .. .. ==> MASK : 0x00007FC0U VAL : 0x00000000U - // .. .. reg_phy_bist_err_clr = 0x0 - // .. .. ==> 0XF800611C[23:15] = 0x00000000U - // .. .. ==> MASK : 0x00FF8000U VAL : 0x00000000U - // .. .. reg_phy_dq_offset = 0x40 - // .. .. ==> 0XF800611C[30:24] = 0x00000040U - // .. .. ==> MASK : 0x7F000000U VAL : 0x40000000U - // .. .. - EMIT_MASKWRITE(0XF800611C, 0x7FFFFFCFU ,0x40000001U), - // .. .. reg_phy_data_slice_in_use = 0x1 - // .. .. ==> 0XF8006120[0:0] = 0x00000001U - // .. .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. .. reg_phy_rdlvl_inc_mode = 0x0 - // .. .. ==> 0XF8006120[1:1] = 0x00000000U - // .. .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. .. reg_phy_gatelvl_inc_mode = 0x0 - // .. .. ==> 0XF8006120[2:2] = 0x00000000U - // .. .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. .. reg_phy_wrlvl_inc_mode = 0x0 - // .. .. ==> 0XF8006120[3:3] = 0x00000000U - // .. .. ==> MASK : 0x00000008U VAL : 0x00000000U - // .. .. reg_phy_bist_shift_dq = 0x0 - // .. .. ==> 0XF8006120[14:6] = 0x00000000U - // .. .. ==> MASK : 0x00007FC0U VAL : 0x00000000U - // .. .. reg_phy_bist_err_clr = 0x0 - // .. .. ==> 0XF8006120[23:15] = 0x00000000U - // .. .. ==> MASK : 0x00FF8000U VAL : 0x00000000U - // .. .. reg_phy_dq_offset = 0x40 - // .. .. ==> 0XF8006120[30:24] = 0x00000040U - // .. .. ==> MASK : 0x7F000000U VAL : 0x40000000U - // .. .. - EMIT_MASKWRITE(0XF8006120, 0x7FFFFFCFU ,0x40000001U), - // .. .. reg_phy_data_slice_in_use = 0x1 - // .. .. ==> 0XF8006124[0:0] = 0x00000001U - // .. .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. .. reg_phy_rdlvl_inc_mode = 0x0 - // .. .. ==> 0XF8006124[1:1] = 0x00000000U - // .. .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. .. reg_phy_gatelvl_inc_mode = 0x0 - // .. .. ==> 0XF8006124[2:2] = 0x00000000U - // .. .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. .. reg_phy_wrlvl_inc_mode = 0x0 - // .. .. ==> 0XF8006124[3:3] = 0x00000000U - // .. .. ==> MASK : 0x00000008U VAL : 0x00000000U - // .. .. reg_phy_bist_shift_dq = 0x0 - // .. .. ==> 0XF8006124[14:6] = 0x00000000U - // .. .. ==> MASK : 0x00007FC0U VAL : 0x00000000U - // .. .. reg_phy_bist_err_clr = 0x0 - // .. .. ==> 0XF8006124[23:15] = 0x00000000U - // .. .. ==> MASK : 0x00FF8000U VAL : 0x00000000U - // .. .. reg_phy_dq_offset = 0x40 - // .. .. ==> 0XF8006124[30:24] = 0x00000040U - // .. .. ==> MASK : 0x7F000000U VAL : 0x40000000U - // .. .. - EMIT_MASKWRITE(0XF8006124, 0x7FFFFFCFU ,0x40000001U), - // .. .. reg_phy_wrlvl_init_ratio = 0x0 - // .. .. ==> 0XF800612C[9:0] = 0x00000000U - // .. .. ==> MASK : 0x000003FFU VAL : 0x00000000U - // .. .. reg_phy_gatelvl_init_ratio = 0xa1 - // .. .. ==> 0XF800612C[19:10] = 0x000000A1U - // .. .. ==> MASK : 0x000FFC00U VAL : 0x00028400U - // .. .. - EMIT_MASKWRITE(0XF800612C, 0x000FFFFFU ,0x00028400U), - // .. .. reg_phy_wrlvl_init_ratio = 0x0 - // .. .. ==> 0XF8006130[9:0] = 0x00000000U - // .. .. ==> MASK : 0x000003FFU VAL : 0x00000000U - // .. .. reg_phy_gatelvl_init_ratio = 0xa0 - // .. .. ==> 0XF8006130[19:10] = 0x000000A0U - // .. .. ==> MASK : 0x000FFC00U VAL : 0x00028000U - // .. .. - EMIT_MASKWRITE(0XF8006130, 0x000FFFFFU ,0x00028000U), - // .. .. reg_phy_wrlvl_init_ratio = 0x7 - // .. .. ==> 0XF8006134[9:0] = 0x00000007U - // .. .. ==> MASK : 0x000003FFU VAL : 0x00000007U - // .. .. reg_phy_gatelvl_init_ratio = 0xad - // .. .. ==> 0XF8006134[19:10] = 0x000000ADU - // .. .. ==> MASK : 0x000FFC00U VAL : 0x0002B400U - // .. .. - EMIT_MASKWRITE(0XF8006134, 0x000FFFFFU ,0x0002B407U), - // .. .. reg_phy_wrlvl_init_ratio = 0x7 - // .. .. ==> 0XF8006138[9:0] = 0x00000007U - // .. .. ==> MASK : 0x000003FFU VAL : 0x00000007U - // .. .. reg_phy_gatelvl_init_ratio = 0xad - // .. .. ==> 0XF8006138[19:10] = 0x000000ADU - // .. .. ==> MASK : 0x000FFC00U VAL : 0x0002B400U - // .. .. - EMIT_MASKWRITE(0XF8006138, 0x000FFFFFU ,0x0002B407U), - // .. .. reg_phy_rd_dqs_slave_ratio = 0x35 - // .. .. ==> 0XF8006140[9:0] = 0x00000035U - // .. .. ==> MASK : 0x000003FFU VAL : 0x00000035U - // .. .. reg_phy_rd_dqs_slave_force = 0x0 - // .. .. ==> 0XF8006140[10:10] = 0x00000000U - // .. .. ==> MASK : 0x00000400U VAL : 0x00000000U - // .. .. reg_phy_rd_dqs_slave_delay = 0x0 - // .. .. ==> 0XF8006140[19:11] = 0x00000000U - // .. .. ==> MASK : 0x000FF800U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006140, 0x000FFFFFU ,0x00000035U), - // .. .. reg_phy_rd_dqs_slave_ratio = 0x35 - // .. .. ==> 0XF8006144[9:0] = 0x00000035U - // .. .. ==> MASK : 0x000003FFU VAL : 0x00000035U - // .. .. reg_phy_rd_dqs_slave_force = 0x0 - // .. .. ==> 0XF8006144[10:10] = 0x00000000U - // .. .. ==> MASK : 0x00000400U VAL : 0x00000000U - // .. .. reg_phy_rd_dqs_slave_delay = 0x0 - // .. .. ==> 0XF8006144[19:11] = 0x00000000U - // .. .. ==> MASK : 0x000FF800U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006144, 0x000FFFFFU ,0x00000035U), - // .. .. reg_phy_rd_dqs_slave_ratio = 0x35 - // .. .. ==> 0XF8006148[9:0] = 0x00000035U - // .. .. ==> MASK : 0x000003FFU VAL : 0x00000035U - // .. .. reg_phy_rd_dqs_slave_force = 0x0 - // .. .. ==> 0XF8006148[10:10] = 0x00000000U - // .. .. ==> MASK : 0x00000400U VAL : 0x00000000U - // .. .. reg_phy_rd_dqs_slave_delay = 0x0 - // .. .. ==> 0XF8006148[19:11] = 0x00000000U - // .. .. ==> MASK : 0x000FF800U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006148, 0x000FFFFFU ,0x00000035U), - // .. .. reg_phy_rd_dqs_slave_ratio = 0x35 - // .. .. ==> 0XF800614C[9:0] = 0x00000035U - // .. .. ==> MASK : 0x000003FFU VAL : 0x00000035U - // .. .. reg_phy_rd_dqs_slave_force = 0x0 - // .. .. ==> 0XF800614C[10:10] = 0x00000000U - // .. .. ==> MASK : 0x00000400U VAL : 0x00000000U - // .. .. reg_phy_rd_dqs_slave_delay = 0x0 - // .. .. ==> 0XF800614C[19:11] = 0x00000000U - // .. .. ==> MASK : 0x000FF800U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF800614C, 0x000FFFFFU ,0x00000035U), - // .. .. reg_phy_wr_dqs_slave_ratio = 0x7c - // .. .. ==> 0XF8006154[9:0] = 0x0000007CU - // .. .. ==> MASK : 0x000003FFU VAL : 0x0000007CU - // .. .. reg_phy_wr_dqs_slave_force = 0x0 - // .. .. ==> 0XF8006154[10:10] = 0x00000000U - // .. .. ==> MASK : 0x00000400U VAL : 0x00000000U - // .. .. reg_phy_wr_dqs_slave_delay = 0x0 - // .. .. ==> 0XF8006154[19:11] = 0x00000000U - // .. .. ==> MASK : 0x000FF800U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006154, 0x000FFFFFU ,0x0000007CU), - // .. .. reg_phy_wr_dqs_slave_ratio = 0x7c - // .. .. ==> 0XF8006158[9:0] = 0x0000007CU - // .. .. ==> MASK : 0x000003FFU VAL : 0x0000007CU - // .. .. reg_phy_wr_dqs_slave_force = 0x0 - // .. .. ==> 0XF8006158[10:10] = 0x00000000U - // .. .. ==> MASK : 0x00000400U VAL : 0x00000000U - // .. .. reg_phy_wr_dqs_slave_delay = 0x0 - // .. .. ==> 0XF8006158[19:11] = 0x00000000U - // .. .. ==> MASK : 0x000FF800U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006158, 0x000FFFFFU ,0x0000007CU), - // .. .. reg_phy_wr_dqs_slave_ratio = 0x87 - // .. .. ==> 0XF800615C[9:0] = 0x00000087U - // .. .. ==> MASK : 0x000003FFU VAL : 0x00000087U - // .. .. reg_phy_wr_dqs_slave_force = 0x0 - // .. .. ==> 0XF800615C[10:10] = 0x00000000U - // .. .. ==> MASK : 0x00000400U VAL : 0x00000000U - // .. .. reg_phy_wr_dqs_slave_delay = 0x0 - // .. .. ==> 0XF800615C[19:11] = 0x00000000U - // .. .. ==> MASK : 0x000FF800U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF800615C, 0x000FFFFFU ,0x00000087U), - // .. .. reg_phy_wr_dqs_slave_ratio = 0x87 - // .. .. ==> 0XF8006160[9:0] = 0x00000087U - // .. .. ==> MASK : 0x000003FFU VAL : 0x00000087U - // .. .. reg_phy_wr_dqs_slave_force = 0x0 - // .. .. ==> 0XF8006160[10:10] = 0x00000000U - // .. .. ==> MASK : 0x00000400U VAL : 0x00000000U - // .. .. reg_phy_wr_dqs_slave_delay = 0x0 - // .. .. ==> 0XF8006160[19:11] = 0x00000000U - // .. .. ==> MASK : 0x000FF800U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006160, 0x000FFFFFU ,0x00000087U), - // .. .. reg_phy_fifo_we_slave_ratio = 0xf6 - // .. .. ==> 0XF8006168[10:0] = 0x000000F6U - // .. .. ==> MASK : 0x000007FFU VAL : 0x000000F6U - // .. .. reg_phy_fifo_we_in_force = 0x0 - // .. .. ==> 0XF8006168[11:11] = 0x00000000U - // .. .. ==> MASK : 0x00000800U VAL : 0x00000000U - // .. .. reg_phy_fifo_we_in_delay = 0x0 - // .. .. ==> 0XF8006168[20:12] = 0x00000000U - // .. .. ==> MASK : 0x001FF000U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006168, 0x001FFFFFU ,0x000000F6U), - // .. .. reg_phy_fifo_we_slave_ratio = 0xf5 - // .. .. ==> 0XF800616C[10:0] = 0x000000F5U - // .. .. ==> MASK : 0x000007FFU VAL : 0x000000F5U - // .. .. reg_phy_fifo_we_in_force = 0x0 - // .. .. ==> 0XF800616C[11:11] = 0x00000000U - // .. .. ==> MASK : 0x00000800U VAL : 0x00000000U - // .. .. reg_phy_fifo_we_in_delay = 0x0 - // .. .. ==> 0XF800616C[20:12] = 0x00000000U - // .. .. ==> MASK : 0x001FF000U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF800616C, 0x001FFFFFU ,0x000000F5U), - // .. .. reg_phy_fifo_we_slave_ratio = 0x102 - // .. .. ==> 0XF8006170[10:0] = 0x00000102U - // .. .. ==> MASK : 0x000007FFU VAL : 0x00000102U - // .. .. reg_phy_fifo_we_in_force = 0x0 - // .. .. ==> 0XF8006170[11:11] = 0x00000000U - // .. .. ==> MASK : 0x00000800U VAL : 0x00000000U - // .. .. reg_phy_fifo_we_in_delay = 0x0 - // .. .. ==> 0XF8006170[20:12] = 0x00000000U - // .. .. ==> MASK : 0x001FF000U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006170, 0x001FFFFFU ,0x00000102U), - // .. .. reg_phy_fifo_we_slave_ratio = 0x102 - // .. .. ==> 0XF8006174[10:0] = 0x00000102U - // .. .. ==> MASK : 0x000007FFU VAL : 0x00000102U - // .. .. reg_phy_fifo_we_in_force = 0x0 - // .. .. ==> 0XF8006174[11:11] = 0x00000000U - // .. .. ==> MASK : 0x00000800U VAL : 0x00000000U - // .. .. reg_phy_fifo_we_in_delay = 0x0 - // .. .. ==> 0XF8006174[20:12] = 0x00000000U - // .. .. ==> MASK : 0x001FF000U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006174, 0x001FFFFFU ,0x00000102U), - // .. .. reg_phy_wr_data_slave_ratio = 0xbc - // .. .. ==> 0XF800617C[9:0] = 0x000000BCU - // .. .. ==> MASK : 0x000003FFU VAL : 0x000000BCU - // .. .. reg_phy_wr_data_slave_force = 0x0 - // .. .. ==> 0XF800617C[10:10] = 0x00000000U - // .. .. ==> MASK : 0x00000400U VAL : 0x00000000U - // .. .. reg_phy_wr_data_slave_delay = 0x0 - // .. .. ==> 0XF800617C[19:11] = 0x00000000U - // .. .. ==> MASK : 0x000FF800U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF800617C, 0x000FFFFFU ,0x000000BCU), - // .. .. reg_phy_wr_data_slave_ratio = 0xbc - // .. .. ==> 0XF8006180[9:0] = 0x000000BCU - // .. .. ==> MASK : 0x000003FFU VAL : 0x000000BCU - // .. .. reg_phy_wr_data_slave_force = 0x0 - // .. .. ==> 0XF8006180[10:10] = 0x00000000U - // .. .. ==> MASK : 0x00000400U VAL : 0x00000000U - // .. .. reg_phy_wr_data_slave_delay = 0x0 - // .. .. ==> 0XF8006180[19:11] = 0x00000000U - // .. .. ==> MASK : 0x000FF800U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006180, 0x000FFFFFU ,0x000000BCU), - // .. .. reg_phy_wr_data_slave_ratio = 0xc7 - // .. .. ==> 0XF8006184[9:0] = 0x000000C7U - // .. .. ==> MASK : 0x000003FFU VAL : 0x000000C7U - // .. .. reg_phy_wr_data_slave_force = 0x0 - // .. .. ==> 0XF8006184[10:10] = 0x00000000U - // .. .. ==> MASK : 0x00000400U VAL : 0x00000000U - // .. .. reg_phy_wr_data_slave_delay = 0x0 - // .. .. ==> 0XF8006184[19:11] = 0x00000000U - // .. .. ==> MASK : 0x000FF800U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006184, 0x000FFFFFU ,0x000000C7U), - // .. .. reg_phy_wr_data_slave_ratio = 0xc7 - // .. .. ==> 0XF8006188[9:0] = 0x000000C7U - // .. .. ==> MASK : 0x000003FFU VAL : 0x000000C7U - // .. .. reg_phy_wr_data_slave_force = 0x0 - // .. .. ==> 0XF8006188[10:10] = 0x00000000U - // .. .. ==> MASK : 0x00000400U VAL : 0x00000000U - // .. .. reg_phy_wr_data_slave_delay = 0x0 - // .. .. ==> 0XF8006188[19:11] = 0x00000000U - // .. .. ==> MASK : 0x000FF800U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006188, 0x000FFFFFU ,0x000000C7U), - // .. .. reg_phy_bl2 = 0x0 - // .. .. ==> 0XF8006190[1:1] = 0x00000000U - // .. .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. .. reg_phy_at_spd_atpg = 0x0 - // .. .. ==> 0XF8006190[2:2] = 0x00000000U - // .. .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. .. reg_phy_bist_enable = 0x0 - // .. .. ==> 0XF8006190[3:3] = 0x00000000U - // .. .. ==> MASK : 0x00000008U VAL : 0x00000000U - // .. .. reg_phy_bist_force_err = 0x0 - // .. .. ==> 0XF8006190[4:4] = 0x00000000U - // .. .. ==> MASK : 0x00000010U VAL : 0x00000000U - // .. .. reg_phy_bist_mode = 0x0 - // .. .. ==> 0XF8006190[6:5] = 0x00000000U - // .. .. ==> MASK : 0x00000060U VAL : 0x00000000U - // .. .. reg_phy_invert_clkout = 0x1 - // .. .. ==> 0XF8006190[7:7] = 0x00000001U - // .. .. ==> MASK : 0x00000080U VAL : 0x00000080U - // .. .. reg_phy_sel_logic = 0x0 - // .. .. ==> 0XF8006190[9:9] = 0x00000000U - // .. .. ==> MASK : 0x00000200U VAL : 0x00000000U - // .. .. reg_phy_ctrl_slave_ratio = 0x100 - // .. .. ==> 0XF8006190[19:10] = 0x00000100U - // .. .. ==> MASK : 0x000FFC00U VAL : 0x00040000U - // .. .. reg_phy_ctrl_slave_force = 0x0 - // .. .. ==> 0XF8006190[20:20] = 0x00000000U - // .. .. ==> MASK : 0x00100000U VAL : 0x00000000U - // .. .. reg_phy_ctrl_slave_delay = 0x0 - // .. .. ==> 0XF8006190[27:21] = 0x00000000U - // .. .. ==> MASK : 0x0FE00000U VAL : 0x00000000U - // .. .. reg_phy_lpddr = 0x0 - // .. .. ==> 0XF8006190[29:29] = 0x00000000U - // .. .. ==> MASK : 0x20000000U VAL : 0x00000000U - // .. .. reg_phy_cmd_latency = 0x0 - // .. .. ==> 0XF8006190[30:30] = 0x00000000U - // .. .. ==> MASK : 0x40000000U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006190, 0x6FFFFEFEU ,0x00040080U), - // .. .. reg_phy_wr_rl_delay = 0x2 - // .. .. ==> 0XF8006194[4:0] = 0x00000002U - // .. .. ==> MASK : 0x0000001FU VAL : 0x00000002U - // .. .. reg_phy_rd_rl_delay = 0x4 - // .. .. ==> 0XF8006194[9:5] = 0x00000004U - // .. .. ==> MASK : 0x000003E0U VAL : 0x00000080U - // .. .. reg_phy_dll_lock_diff = 0xf - // .. .. ==> 0XF8006194[13:10] = 0x0000000FU - // .. .. ==> MASK : 0x00003C00U VAL : 0x00003C00U - // .. .. reg_phy_use_wr_level = 0x1 - // .. .. ==> 0XF8006194[14:14] = 0x00000001U - // .. .. ==> MASK : 0x00004000U VAL : 0x00004000U - // .. .. reg_phy_use_rd_dqs_gate_level = 0x1 - // .. .. ==> 0XF8006194[15:15] = 0x00000001U - // .. .. ==> MASK : 0x00008000U VAL : 0x00008000U - // .. .. reg_phy_use_rd_data_eye_level = 0x1 - // .. .. ==> 0XF8006194[16:16] = 0x00000001U - // .. .. ==> MASK : 0x00010000U VAL : 0x00010000U - // .. .. reg_phy_dis_calib_rst = 0x0 - // .. .. ==> 0XF8006194[17:17] = 0x00000000U - // .. .. ==> MASK : 0x00020000U VAL : 0x00000000U - // .. .. reg_phy_ctrl_slave_delay = 0x0 - // .. .. ==> 0XF8006194[19:18] = 0x00000000U - // .. .. ==> MASK : 0x000C0000U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006194, 0x000FFFFFU ,0x0001FC82U), - // .. .. reg_arb_page_addr_mask = 0x0 - // .. .. ==> 0XF8006204[31:0] = 0x00000000U - // .. .. ==> MASK : 0xFFFFFFFFU VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006204, 0xFFFFFFFFU ,0x00000000U), - // .. .. reg_arb_pri_wr_portn = 0x3ff - // .. .. ==> 0XF8006208[9:0] = 0x000003FFU - // .. .. ==> MASK : 0x000003FFU VAL : 0x000003FFU - // .. .. reg_arb_disable_aging_wr_portn = 0x0 - // .. .. ==> 0XF8006208[16:16] = 0x00000000U - // .. .. ==> MASK : 0x00010000U VAL : 0x00000000U - // .. .. reg_arb_disable_urgent_wr_portn = 0x0 - // .. .. ==> 0XF8006208[17:17] = 0x00000000U - // .. .. ==> MASK : 0x00020000U VAL : 0x00000000U - // .. .. reg_arb_dis_page_match_wr_portn = 0x0 - // .. .. ==> 0XF8006208[18:18] = 0x00000000U - // .. .. ==> MASK : 0x00040000U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006208, 0x000703FFU ,0x000003FFU), - // .. .. reg_arb_pri_wr_portn = 0x3ff - // .. .. ==> 0XF800620C[9:0] = 0x000003FFU - // .. .. ==> MASK : 0x000003FFU VAL : 0x000003FFU - // .. .. reg_arb_disable_aging_wr_portn = 0x0 - // .. .. ==> 0XF800620C[16:16] = 0x00000000U - // .. .. ==> MASK : 0x00010000U VAL : 0x00000000U - // .. .. reg_arb_disable_urgent_wr_portn = 0x0 - // .. .. ==> 0XF800620C[17:17] = 0x00000000U - // .. .. ==> MASK : 0x00020000U VAL : 0x00000000U - // .. .. reg_arb_dis_page_match_wr_portn = 0x0 - // .. .. ==> 0XF800620C[18:18] = 0x00000000U - // .. .. ==> MASK : 0x00040000U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF800620C, 0x000703FFU ,0x000003FFU), - // .. .. reg_arb_pri_wr_portn = 0x3ff - // .. .. ==> 0XF8006210[9:0] = 0x000003FFU - // .. .. ==> MASK : 0x000003FFU VAL : 0x000003FFU - // .. .. reg_arb_disable_aging_wr_portn = 0x0 - // .. .. ==> 0XF8006210[16:16] = 0x00000000U - // .. .. ==> MASK : 0x00010000U VAL : 0x00000000U - // .. .. reg_arb_disable_urgent_wr_portn = 0x0 - // .. .. ==> 0XF8006210[17:17] = 0x00000000U - // .. .. ==> MASK : 0x00020000U VAL : 0x00000000U - // .. .. reg_arb_dis_page_match_wr_portn = 0x0 - // .. .. ==> 0XF8006210[18:18] = 0x00000000U - // .. .. ==> MASK : 0x00040000U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006210, 0x000703FFU ,0x000003FFU), - // .. .. reg_arb_pri_wr_portn = 0x3ff - // .. .. ==> 0XF8006214[9:0] = 0x000003FFU - // .. .. ==> MASK : 0x000003FFU VAL : 0x000003FFU - // .. .. reg_arb_disable_aging_wr_portn = 0x0 - // .. .. ==> 0XF8006214[16:16] = 0x00000000U - // .. .. ==> MASK : 0x00010000U VAL : 0x00000000U - // .. .. reg_arb_disable_urgent_wr_portn = 0x0 - // .. .. ==> 0XF8006214[17:17] = 0x00000000U - // .. .. ==> MASK : 0x00020000U VAL : 0x00000000U - // .. .. reg_arb_dis_page_match_wr_portn = 0x0 - // .. .. ==> 0XF8006214[18:18] = 0x00000000U - // .. .. ==> MASK : 0x00040000U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006214, 0x000703FFU ,0x000003FFU), - // .. .. reg_arb_pri_rd_portn = 0x3ff - // .. .. ==> 0XF8006218[9:0] = 0x000003FFU - // .. .. ==> MASK : 0x000003FFU VAL : 0x000003FFU - // .. .. reg_arb_disable_aging_rd_portn = 0x0 - // .. .. ==> 0XF8006218[16:16] = 0x00000000U - // .. .. ==> MASK : 0x00010000U VAL : 0x00000000U - // .. .. reg_arb_disable_urgent_rd_portn = 0x0 - // .. .. ==> 0XF8006218[17:17] = 0x00000000U - // .. .. ==> MASK : 0x00020000U VAL : 0x00000000U - // .. .. reg_arb_dis_page_match_rd_portn = 0x0 - // .. .. ==> 0XF8006218[18:18] = 0x00000000U - // .. .. ==> MASK : 0x00040000U VAL : 0x00000000U - // .. .. reg_arb_set_hpr_rd_portn = 0x0 - // .. .. ==> 0XF8006218[19:19] = 0x00000000U - // .. .. ==> MASK : 0x00080000U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006218, 0x000F03FFU ,0x000003FFU), - // .. .. reg_arb_pri_rd_portn = 0x3ff - // .. .. ==> 0XF800621C[9:0] = 0x000003FFU - // .. .. ==> MASK : 0x000003FFU VAL : 0x000003FFU - // .. .. reg_arb_disable_aging_rd_portn = 0x0 - // .. .. ==> 0XF800621C[16:16] = 0x00000000U - // .. .. ==> MASK : 0x00010000U VAL : 0x00000000U - // .. .. reg_arb_disable_urgent_rd_portn = 0x0 - // .. .. ==> 0XF800621C[17:17] = 0x00000000U - // .. .. ==> MASK : 0x00020000U VAL : 0x00000000U - // .. .. reg_arb_dis_page_match_rd_portn = 0x0 - // .. .. ==> 0XF800621C[18:18] = 0x00000000U - // .. .. ==> MASK : 0x00040000U VAL : 0x00000000U - // .. .. reg_arb_set_hpr_rd_portn = 0x0 - // .. .. ==> 0XF800621C[19:19] = 0x00000000U - // .. .. ==> MASK : 0x00080000U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF800621C, 0x000F03FFU ,0x000003FFU), - // .. .. reg_arb_pri_rd_portn = 0x3ff - // .. .. ==> 0XF8006220[9:0] = 0x000003FFU - // .. .. ==> MASK : 0x000003FFU VAL : 0x000003FFU - // .. .. reg_arb_disable_aging_rd_portn = 0x0 - // .. .. ==> 0XF8006220[16:16] = 0x00000000U - // .. .. ==> MASK : 0x00010000U VAL : 0x00000000U - // .. .. reg_arb_disable_urgent_rd_portn = 0x0 - // .. .. ==> 0XF8006220[17:17] = 0x00000000U - // .. .. ==> MASK : 0x00020000U VAL : 0x00000000U - // .. .. reg_arb_dis_page_match_rd_portn = 0x0 - // .. .. ==> 0XF8006220[18:18] = 0x00000000U - // .. .. ==> MASK : 0x00040000U VAL : 0x00000000U - // .. .. reg_arb_set_hpr_rd_portn = 0x0 - // .. .. ==> 0XF8006220[19:19] = 0x00000000U - // .. .. ==> MASK : 0x00080000U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006220, 0x000F03FFU ,0x000003FFU), - // .. .. reg_arb_pri_rd_portn = 0x3ff - // .. .. ==> 0XF8006224[9:0] = 0x000003FFU - // .. .. ==> MASK : 0x000003FFU VAL : 0x000003FFU - // .. .. reg_arb_disable_aging_rd_portn = 0x0 - // .. .. ==> 0XF8006224[16:16] = 0x00000000U - // .. .. ==> MASK : 0x00010000U VAL : 0x00000000U - // .. .. reg_arb_disable_urgent_rd_portn = 0x0 - // .. .. ==> 0XF8006224[17:17] = 0x00000000U - // .. .. ==> MASK : 0x00020000U VAL : 0x00000000U - // .. .. reg_arb_dis_page_match_rd_portn = 0x0 - // .. .. ==> 0XF8006224[18:18] = 0x00000000U - // .. .. ==> MASK : 0x00040000U VAL : 0x00000000U - // .. .. reg_arb_set_hpr_rd_portn = 0x0 - // .. .. ==> 0XF8006224[19:19] = 0x00000000U - // .. .. ==> MASK : 0x00080000U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006224, 0x000F03FFU ,0x000003FFU), - // .. .. reg_ddrc_lpddr2 = 0x0 - // .. .. ==> 0XF80062A8[0:0] = 0x00000000U - // .. .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. .. reg_ddrc_derate_enable = 0x0 - // .. .. ==> 0XF80062A8[2:2] = 0x00000000U - // .. .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. .. reg_ddrc_mr4_margin = 0x0 - // .. .. ==> 0XF80062A8[11:4] = 0x00000000U - // .. .. ==> MASK : 0x00000FF0U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF80062A8, 0x00000FF5U ,0x00000000U), - // .. .. reg_ddrc_mr4_read_interval = 0x0 - // .. .. ==> 0XF80062AC[31:0] = 0x00000000U - // .. .. ==> MASK : 0xFFFFFFFFU VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF80062AC, 0xFFFFFFFFU ,0x00000000U), - // .. .. reg_ddrc_min_stable_clock_x1 = 0x5 - // .. .. ==> 0XF80062B0[3:0] = 0x00000005U - // .. .. ==> MASK : 0x0000000FU VAL : 0x00000005U - // .. .. reg_ddrc_idle_after_reset_x32 = 0x12 - // .. .. ==> 0XF80062B0[11:4] = 0x00000012U - // .. .. ==> MASK : 0x00000FF0U VAL : 0x00000120U - // .. .. reg_ddrc_t_mrw = 0x5 - // .. .. ==> 0XF80062B0[21:12] = 0x00000005U - // .. .. ==> MASK : 0x003FF000U VAL : 0x00005000U - // .. .. - EMIT_MASKWRITE(0XF80062B0, 0x003FFFFFU ,0x00005125U), - // .. .. reg_ddrc_max_auto_init_x1024 = 0xa8 - // .. .. ==> 0XF80062B4[7:0] = 0x000000A8U - // .. .. ==> MASK : 0x000000FFU VAL : 0x000000A8U - // .. .. reg_ddrc_dev_zqinit_x32 = 0x12 - // .. .. ==> 0XF80062B4[17:8] = 0x00000012U - // .. .. ==> MASK : 0x0003FF00U VAL : 0x00001200U - // .. .. - EMIT_MASKWRITE(0XF80062B4, 0x0003FFFFU ,0x000012A8U), - // .. .. START: POLL ON DCI STATUS - // .. .. DONE = 1 - // .. .. ==> 0XF8000B74[13:13] = 0x00000001U - // .. .. ==> MASK : 0x00002000U VAL : 0x00002000U - // .. .. - EMIT_MASKPOLL(0XF8000B74, 0x00002000U), - // .. .. FINISH: POLL ON DCI STATUS - // .. .. START: UNLOCK DDR - // .. .. reg_ddrc_soft_rstb = 0x1 - // .. .. ==> 0XF8006000[0:0] = 0x00000001U - // .. .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. .. reg_ddrc_powerdown_en = 0x0 - // .. .. ==> 0XF8006000[1:1] = 0x00000000U - // .. .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. .. reg_ddrc_data_bus_width = 0x0 - // .. .. ==> 0XF8006000[3:2] = 0x00000000U - // .. .. ==> MASK : 0x0000000CU VAL : 0x00000000U - // .. .. reg_ddrc_burst8_refresh = 0x0 - // .. .. ==> 0XF8006000[6:4] = 0x00000000U - // .. .. ==> MASK : 0x00000070U VAL : 0x00000000U - // .. .. reg_ddrc_rdwr_idle_gap = 1 - // .. .. ==> 0XF8006000[13:7] = 0x00000001U - // .. .. ==> MASK : 0x00003F80U VAL : 0x00000080U - // .. .. reg_ddrc_dis_rd_bypass = 0x0 - // .. .. ==> 0XF8006000[14:14] = 0x00000000U - // .. .. ==> MASK : 0x00004000U VAL : 0x00000000U - // .. .. reg_ddrc_dis_act_bypass = 0x0 - // .. .. ==> 0XF8006000[15:15] = 0x00000000U - // .. .. ==> MASK : 0x00008000U VAL : 0x00000000U - // .. .. reg_ddrc_dis_auto_refresh = 0x0 - // .. .. ==> 0XF8006000[16:16] = 0x00000000U - // .. .. ==> MASK : 0x00010000U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006000, 0x0001FFFFU ,0x00000081U), - // .. .. FINISH: UNLOCK DDR - // .. .. START: CHECK DDR STATUS - // .. .. ddrc_reg_operating_mode = 1 - // .. .. ==> 0XF8006054[2:0] = 0x00000001U - // .. .. ==> MASK : 0x00000007U VAL : 0x00000001U - // .. .. - EMIT_MASKPOLL(0XF8006054, 0x00000007U), - // .. .. FINISH: CHECK DDR STATUS - // .. FINISH: DDR INITIALIZATION - // FINISH: top - // - EMIT_EXIT(), - - // -}; - -unsigned long ps7_mio_init_data_3_0[] = { - // START: top - // .. START: SLCR SETTINGS - // .. UNLOCK_KEY = 0XDF0D - // .. ==> 0XF8000008[15:0] = 0x0000DF0DU - // .. ==> MASK : 0x0000FFFFU VAL : 0x0000DF0DU - // .. - EMIT_MASKWRITE(0XF8000008, 0x0000FFFFU ,0x0000DF0DU), - // .. FINISH: SLCR SETTINGS - // .. START: OCM REMAPPING - // .. FINISH: OCM REMAPPING - // .. START: DDRIOB SETTINGS - // .. reserved_INP_POWER = 0x0 - // .. ==> 0XF8000B40[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. INP_TYPE = 0x0 - // .. ==> 0XF8000B40[2:1] = 0x00000000U - // .. ==> MASK : 0x00000006U VAL : 0x00000000U - // .. DCI_UPDATE_B = 0x0 - // .. ==> 0XF8000B40[3:3] = 0x00000000U - // .. ==> MASK : 0x00000008U VAL : 0x00000000U - // .. TERM_EN = 0x0 - // .. ==> 0XF8000B40[4:4] = 0x00000000U - // .. ==> MASK : 0x00000010U VAL : 0x00000000U - // .. DCI_TYPE = 0x0 - // .. ==> 0XF8000B40[6:5] = 0x00000000U - // .. ==> MASK : 0x00000060U VAL : 0x00000000U - // .. IBUF_DISABLE_MODE = 0x0 - // .. ==> 0XF8000B40[7:7] = 0x00000000U - // .. ==> MASK : 0x00000080U VAL : 0x00000000U - // .. TERM_DISABLE_MODE = 0x0 - // .. ==> 0XF8000B40[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. OUTPUT_EN = 0x3 - // .. ==> 0XF8000B40[10:9] = 0x00000003U - // .. ==> MASK : 0x00000600U VAL : 0x00000600U - // .. PULLUP_EN = 0x0 - // .. ==> 0XF8000B40[11:11] = 0x00000000U - // .. ==> MASK : 0x00000800U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000B40, 0x00000FFFU ,0x00000600U), - // .. reserved_INP_POWER = 0x0 - // .. ==> 0XF8000B44[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. INP_TYPE = 0x0 - // .. ==> 0XF8000B44[2:1] = 0x00000000U - // .. ==> MASK : 0x00000006U VAL : 0x00000000U - // .. DCI_UPDATE_B = 0x0 - // .. ==> 0XF8000B44[3:3] = 0x00000000U - // .. ==> MASK : 0x00000008U VAL : 0x00000000U - // .. TERM_EN = 0x0 - // .. ==> 0XF8000B44[4:4] = 0x00000000U - // .. ==> MASK : 0x00000010U VAL : 0x00000000U - // .. DCI_TYPE = 0x0 - // .. ==> 0XF8000B44[6:5] = 0x00000000U - // .. ==> MASK : 0x00000060U VAL : 0x00000000U - // .. IBUF_DISABLE_MODE = 0x0 - // .. ==> 0XF8000B44[7:7] = 0x00000000U - // .. ==> MASK : 0x00000080U VAL : 0x00000000U - // .. TERM_DISABLE_MODE = 0x0 - // .. ==> 0XF8000B44[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. OUTPUT_EN = 0x3 - // .. ==> 0XF8000B44[10:9] = 0x00000003U - // .. ==> MASK : 0x00000600U VAL : 0x00000600U - // .. PULLUP_EN = 0x0 - // .. ==> 0XF8000B44[11:11] = 0x00000000U - // .. ==> MASK : 0x00000800U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000B44, 0x00000FFFU ,0x00000600U), - // .. reserved_INP_POWER = 0x0 - // .. ==> 0XF8000B48[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. INP_TYPE = 0x1 - // .. ==> 0XF8000B48[2:1] = 0x00000001U - // .. ==> MASK : 0x00000006U VAL : 0x00000002U - // .. DCI_UPDATE_B = 0x0 - // .. ==> 0XF8000B48[3:3] = 0x00000000U - // .. ==> MASK : 0x00000008U VAL : 0x00000000U - // .. TERM_EN = 0x1 - // .. ==> 0XF8000B48[4:4] = 0x00000001U - // .. ==> MASK : 0x00000010U VAL : 0x00000010U - // .. DCI_TYPE = 0x3 - // .. ==> 0XF8000B48[6:5] = 0x00000003U - // .. ==> MASK : 0x00000060U VAL : 0x00000060U - // .. IBUF_DISABLE_MODE = 0 - // .. ==> 0XF8000B48[7:7] = 0x00000000U - // .. ==> MASK : 0x00000080U VAL : 0x00000000U - // .. TERM_DISABLE_MODE = 0 - // .. ==> 0XF8000B48[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. OUTPUT_EN = 0x3 - // .. ==> 0XF8000B48[10:9] = 0x00000003U - // .. ==> MASK : 0x00000600U VAL : 0x00000600U - // .. PULLUP_EN = 0x0 - // .. ==> 0XF8000B48[11:11] = 0x00000000U - // .. ==> MASK : 0x00000800U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000B48, 0x00000FFFU ,0x00000672U), - // .. reserved_INP_POWER = 0x0 - // .. ==> 0XF8000B4C[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. INP_TYPE = 0x1 - // .. ==> 0XF8000B4C[2:1] = 0x00000001U - // .. ==> MASK : 0x00000006U VAL : 0x00000002U - // .. DCI_UPDATE_B = 0x0 - // .. ==> 0XF8000B4C[3:3] = 0x00000000U - // .. ==> MASK : 0x00000008U VAL : 0x00000000U - // .. TERM_EN = 0x1 - // .. ==> 0XF8000B4C[4:4] = 0x00000001U - // .. ==> MASK : 0x00000010U VAL : 0x00000010U - // .. DCI_TYPE = 0x3 - // .. ==> 0XF8000B4C[6:5] = 0x00000003U - // .. ==> MASK : 0x00000060U VAL : 0x00000060U - // .. IBUF_DISABLE_MODE = 0 - // .. ==> 0XF8000B4C[7:7] = 0x00000000U - // .. ==> MASK : 0x00000080U VAL : 0x00000000U - // .. TERM_DISABLE_MODE = 0 - // .. ==> 0XF8000B4C[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. OUTPUT_EN = 0x3 - // .. ==> 0XF8000B4C[10:9] = 0x00000003U - // .. ==> MASK : 0x00000600U VAL : 0x00000600U - // .. PULLUP_EN = 0x0 - // .. ==> 0XF8000B4C[11:11] = 0x00000000U - // .. ==> MASK : 0x00000800U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000B4C, 0x00000FFFU ,0x00000672U), - // .. reserved_INP_POWER = 0x0 - // .. ==> 0XF8000B50[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. INP_TYPE = 0x2 - // .. ==> 0XF8000B50[2:1] = 0x00000002U - // .. ==> MASK : 0x00000006U VAL : 0x00000004U - // .. DCI_UPDATE_B = 0x0 - // .. ==> 0XF8000B50[3:3] = 0x00000000U - // .. ==> MASK : 0x00000008U VAL : 0x00000000U - // .. TERM_EN = 0x1 - // .. ==> 0XF8000B50[4:4] = 0x00000001U - // .. ==> MASK : 0x00000010U VAL : 0x00000010U - // .. DCI_TYPE = 0x3 - // .. ==> 0XF8000B50[6:5] = 0x00000003U - // .. ==> MASK : 0x00000060U VAL : 0x00000060U - // .. IBUF_DISABLE_MODE = 0 - // .. ==> 0XF8000B50[7:7] = 0x00000000U - // .. ==> MASK : 0x00000080U VAL : 0x00000000U - // .. TERM_DISABLE_MODE = 0 - // .. ==> 0XF8000B50[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. OUTPUT_EN = 0x3 - // .. ==> 0XF8000B50[10:9] = 0x00000003U - // .. ==> MASK : 0x00000600U VAL : 0x00000600U - // .. PULLUP_EN = 0x0 - // .. ==> 0XF8000B50[11:11] = 0x00000000U - // .. ==> MASK : 0x00000800U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000B50, 0x00000FFFU ,0x00000674U), - // .. reserved_INP_POWER = 0x0 - // .. ==> 0XF8000B54[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. INP_TYPE = 0x2 - // .. ==> 0XF8000B54[2:1] = 0x00000002U - // .. ==> MASK : 0x00000006U VAL : 0x00000004U - // .. DCI_UPDATE_B = 0x0 - // .. ==> 0XF8000B54[3:3] = 0x00000000U - // .. ==> MASK : 0x00000008U VAL : 0x00000000U - // .. TERM_EN = 0x1 - // .. ==> 0XF8000B54[4:4] = 0x00000001U - // .. ==> MASK : 0x00000010U VAL : 0x00000010U - // .. DCI_TYPE = 0x3 - // .. ==> 0XF8000B54[6:5] = 0x00000003U - // .. ==> MASK : 0x00000060U VAL : 0x00000060U - // .. IBUF_DISABLE_MODE = 0 - // .. ==> 0XF8000B54[7:7] = 0x00000000U - // .. ==> MASK : 0x00000080U VAL : 0x00000000U - // .. TERM_DISABLE_MODE = 0 - // .. ==> 0XF8000B54[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. OUTPUT_EN = 0x3 - // .. ==> 0XF8000B54[10:9] = 0x00000003U - // .. ==> MASK : 0x00000600U VAL : 0x00000600U - // .. PULLUP_EN = 0x0 - // .. ==> 0XF8000B54[11:11] = 0x00000000U - // .. ==> MASK : 0x00000800U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000B54, 0x00000FFFU ,0x00000674U), - // .. reserved_INP_POWER = 0x0 - // .. ==> 0XF8000B58[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. INP_TYPE = 0x0 - // .. ==> 0XF8000B58[2:1] = 0x00000000U - // .. ==> MASK : 0x00000006U VAL : 0x00000000U - // .. DCI_UPDATE_B = 0x0 - // .. ==> 0XF8000B58[3:3] = 0x00000000U - // .. ==> MASK : 0x00000008U VAL : 0x00000000U - // .. TERM_EN = 0x0 - // .. ==> 0XF8000B58[4:4] = 0x00000000U - // .. ==> MASK : 0x00000010U VAL : 0x00000000U - // .. DCI_TYPE = 0x0 - // .. ==> 0XF8000B58[6:5] = 0x00000000U - // .. ==> MASK : 0x00000060U VAL : 0x00000000U - // .. IBUF_DISABLE_MODE = 0x0 - // .. ==> 0XF8000B58[7:7] = 0x00000000U - // .. ==> MASK : 0x00000080U VAL : 0x00000000U - // .. TERM_DISABLE_MODE = 0x0 - // .. ==> 0XF8000B58[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. OUTPUT_EN = 0x3 - // .. ==> 0XF8000B58[10:9] = 0x00000003U - // .. ==> MASK : 0x00000600U VAL : 0x00000600U - // .. PULLUP_EN = 0x0 - // .. ==> 0XF8000B58[11:11] = 0x00000000U - // .. ==> MASK : 0x00000800U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000B58, 0x00000FFFU ,0x00000600U), - // .. reserved_DRIVE_P = 0x1c - // .. ==> 0XF8000B5C[6:0] = 0x0000001CU - // .. ==> MASK : 0x0000007FU VAL : 0x0000001CU - // .. reserved_DRIVE_N = 0xc - // .. ==> 0XF8000B5C[13:7] = 0x0000000CU - // .. ==> MASK : 0x00003F80U VAL : 0x00000600U - // .. reserved_SLEW_P = 0x3 - // .. ==> 0XF8000B5C[18:14] = 0x00000003U - // .. ==> MASK : 0x0007C000U VAL : 0x0000C000U - // .. reserved_SLEW_N = 0x3 - // .. ==> 0XF8000B5C[23:19] = 0x00000003U - // .. ==> MASK : 0x00F80000U VAL : 0x00180000U - // .. reserved_GTL = 0x0 - // .. ==> 0XF8000B5C[26:24] = 0x00000000U - // .. ==> MASK : 0x07000000U VAL : 0x00000000U - // .. reserved_RTERM = 0x0 - // .. ==> 0XF8000B5C[31:27] = 0x00000000U - // .. ==> MASK : 0xF8000000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000B5C, 0xFFFFFFFFU ,0x0018C61CU), - // .. reserved_DRIVE_P = 0x1c - // .. ==> 0XF8000B60[6:0] = 0x0000001CU - // .. ==> MASK : 0x0000007FU VAL : 0x0000001CU - // .. reserved_DRIVE_N = 0xc - // .. ==> 0XF8000B60[13:7] = 0x0000000CU - // .. ==> MASK : 0x00003F80U VAL : 0x00000600U - // .. reserved_SLEW_P = 0x6 - // .. ==> 0XF8000B60[18:14] = 0x00000006U - // .. ==> MASK : 0x0007C000U VAL : 0x00018000U - // .. reserved_SLEW_N = 0x1f - // .. ==> 0XF8000B60[23:19] = 0x0000001FU - // .. ==> MASK : 0x00F80000U VAL : 0x00F80000U - // .. reserved_GTL = 0x0 - // .. ==> 0XF8000B60[26:24] = 0x00000000U - // .. ==> MASK : 0x07000000U VAL : 0x00000000U - // .. reserved_RTERM = 0x0 - // .. ==> 0XF8000B60[31:27] = 0x00000000U - // .. ==> MASK : 0xF8000000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000B60, 0xFFFFFFFFU ,0x00F9861CU), - // .. reserved_DRIVE_P = 0x1c - // .. ==> 0XF8000B64[6:0] = 0x0000001CU - // .. ==> MASK : 0x0000007FU VAL : 0x0000001CU - // .. reserved_DRIVE_N = 0xc - // .. ==> 0XF8000B64[13:7] = 0x0000000CU - // .. ==> MASK : 0x00003F80U VAL : 0x00000600U - // .. reserved_SLEW_P = 0x6 - // .. ==> 0XF8000B64[18:14] = 0x00000006U - // .. ==> MASK : 0x0007C000U VAL : 0x00018000U - // .. reserved_SLEW_N = 0x1f - // .. ==> 0XF8000B64[23:19] = 0x0000001FU - // .. ==> MASK : 0x00F80000U VAL : 0x00F80000U - // .. reserved_GTL = 0x0 - // .. ==> 0XF8000B64[26:24] = 0x00000000U - // .. ==> MASK : 0x07000000U VAL : 0x00000000U - // .. reserved_RTERM = 0x0 - // .. ==> 0XF8000B64[31:27] = 0x00000000U - // .. ==> MASK : 0xF8000000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000B64, 0xFFFFFFFFU ,0x00F9861CU), - // .. reserved_DRIVE_P = 0x1c - // .. ==> 0XF8000B68[6:0] = 0x0000001CU - // .. ==> MASK : 0x0000007FU VAL : 0x0000001CU - // .. reserved_DRIVE_N = 0xc - // .. ==> 0XF8000B68[13:7] = 0x0000000CU - // .. ==> MASK : 0x00003F80U VAL : 0x00000600U - // .. reserved_SLEW_P = 0x6 - // .. ==> 0XF8000B68[18:14] = 0x00000006U - // .. ==> MASK : 0x0007C000U VAL : 0x00018000U - // .. reserved_SLEW_N = 0x1f - // .. ==> 0XF8000B68[23:19] = 0x0000001FU - // .. ==> MASK : 0x00F80000U VAL : 0x00F80000U - // .. reserved_GTL = 0x0 - // .. ==> 0XF8000B68[26:24] = 0x00000000U - // .. ==> MASK : 0x07000000U VAL : 0x00000000U - // .. reserved_RTERM = 0x0 - // .. ==> 0XF8000B68[31:27] = 0x00000000U - // .. ==> MASK : 0xF8000000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000B68, 0xFFFFFFFFU ,0x00F9861CU), - // .. VREF_INT_EN = 0x1 - // .. ==> 0XF8000B6C[0:0] = 0x00000001U - // .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. VREF_SEL = 0x4 - // .. ==> 0XF8000B6C[4:1] = 0x00000004U - // .. ==> MASK : 0x0000001EU VAL : 0x00000008U - // .. VREF_EXT_EN = 0x0 - // .. ==> 0XF8000B6C[6:5] = 0x00000000U - // .. ==> MASK : 0x00000060U VAL : 0x00000000U - // .. reserved_VREF_PULLUP_EN = 0x0 - // .. ==> 0XF8000B6C[8:7] = 0x00000000U - // .. ==> MASK : 0x00000180U VAL : 0x00000000U - // .. REFIO_EN = 0x1 - // .. ==> 0XF8000B6C[9:9] = 0x00000001U - // .. ==> MASK : 0x00000200U VAL : 0x00000200U - // .. reserved_REFIO_TEST = 0x0 - // .. ==> 0XF8000B6C[11:10] = 0x00000000U - // .. ==> MASK : 0x00000C00U VAL : 0x00000000U - // .. reserved_REFIO_PULLUP_EN = 0x0 - // .. ==> 0XF8000B6C[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. reserved_DRST_B_PULLUP_EN = 0x0 - // .. ==> 0XF8000B6C[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. reserved_CKE_PULLUP_EN = 0x0 - // .. ==> 0XF8000B6C[14:14] = 0x00000000U - // .. ==> MASK : 0x00004000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000B6C, 0x00007FFFU ,0x00000209U), - // .. .. START: ASSERT RESET - // .. .. RESET = 1 - // .. .. ==> 0XF8000B70[0:0] = 0x00000001U - // .. .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. .. - EMIT_MASKWRITE(0XF8000B70, 0x00000001U ,0x00000001U), - // .. .. FINISH: ASSERT RESET - // .. .. START: DEASSERT RESET - // .. .. RESET = 0 - // .. .. ==> 0XF8000B70[0:0] = 0x00000000U - // .. .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. .. reserved_VRN_OUT = 0x1 - // .. .. ==> 0XF8000B70[5:5] = 0x00000001U - // .. .. ==> MASK : 0x00000020U VAL : 0x00000020U - // .. .. - EMIT_MASKWRITE(0XF8000B70, 0x00000021U ,0x00000020U), - // .. .. FINISH: DEASSERT RESET - // .. .. RESET = 0x1 - // .. .. ==> 0XF8000B70[0:0] = 0x00000001U - // .. .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. .. ENABLE = 0x1 - // .. .. ==> 0XF8000B70[1:1] = 0x00000001U - // .. .. ==> MASK : 0x00000002U VAL : 0x00000002U - // .. .. reserved_VRP_TRI = 0x0 - // .. .. ==> 0XF8000B70[2:2] = 0x00000000U - // .. .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. .. reserved_VRN_TRI = 0x0 - // .. .. ==> 0XF8000B70[3:3] = 0x00000000U - // .. .. ==> MASK : 0x00000008U VAL : 0x00000000U - // .. .. reserved_VRP_OUT = 0x0 - // .. .. ==> 0XF8000B70[4:4] = 0x00000000U - // .. .. ==> MASK : 0x00000010U VAL : 0x00000000U - // .. .. reserved_VRN_OUT = 0x1 - // .. .. ==> 0XF8000B70[5:5] = 0x00000001U - // .. .. ==> MASK : 0x00000020U VAL : 0x00000020U - // .. .. NREF_OPT1 = 0x0 - // .. .. ==> 0XF8000B70[7:6] = 0x00000000U - // .. .. ==> MASK : 0x000000C0U VAL : 0x00000000U - // .. .. NREF_OPT2 = 0x0 - // .. .. ==> 0XF8000B70[10:8] = 0x00000000U - // .. .. ==> MASK : 0x00000700U VAL : 0x00000000U - // .. .. NREF_OPT4 = 0x1 - // .. .. ==> 0XF8000B70[13:11] = 0x00000001U - // .. .. ==> MASK : 0x00003800U VAL : 0x00000800U - // .. .. PREF_OPT1 = 0x0 - // .. .. ==> 0XF8000B70[15:14] = 0x00000000U - // .. .. ==> MASK : 0x0000C000U VAL : 0x00000000U - // .. .. PREF_OPT2 = 0x0 - // .. .. ==> 0XF8000B70[19:17] = 0x00000000U - // .. .. ==> MASK : 0x000E0000U VAL : 0x00000000U - // .. .. UPDATE_CONTROL = 0x0 - // .. .. ==> 0XF8000B70[20:20] = 0x00000000U - // .. .. ==> MASK : 0x00100000U VAL : 0x00000000U - // .. .. reserved_INIT_COMPLETE = 0x0 - // .. .. ==> 0XF8000B70[21:21] = 0x00000000U - // .. .. ==> MASK : 0x00200000U VAL : 0x00000000U - // .. .. reserved_TST_CLK = 0x0 - // .. .. ==> 0XF8000B70[22:22] = 0x00000000U - // .. .. ==> MASK : 0x00400000U VAL : 0x00000000U - // .. .. reserved_TST_HLN = 0x0 - // .. .. ==> 0XF8000B70[23:23] = 0x00000000U - // .. .. ==> MASK : 0x00800000U VAL : 0x00000000U - // .. .. reserved_TST_HLP = 0x0 - // .. .. ==> 0XF8000B70[24:24] = 0x00000000U - // .. .. ==> MASK : 0x01000000U VAL : 0x00000000U - // .. .. reserved_TST_RST = 0x0 - // .. .. ==> 0XF8000B70[25:25] = 0x00000000U - // .. .. ==> MASK : 0x02000000U VAL : 0x00000000U - // .. .. reserved_INT_DCI_EN = 0x0 - // .. .. ==> 0XF8000B70[26:26] = 0x00000000U - // .. .. ==> MASK : 0x04000000U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8000B70, 0x07FEFFFFU ,0x00000823U), - // .. FINISH: DDRIOB SETTINGS - // .. START: MIO PROGRAMMING - // .. TRI_ENABLE = 0 - // .. ==> 0XF8000700[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF8000700[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 0 - // .. ==> 0XF8000700[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF8000700[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF8000700[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF8000700[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 3 - // .. ==> 0XF8000700[11:9] = 0x00000003U - // .. ==> MASK : 0x00000E00U VAL : 0x00000600U - // .. PULLUP = 0 - // .. ==> 0XF8000700[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000700[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000700, 0x00003FFFU ,0x00000600U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF8000704[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 1 - // .. ==> 0XF8000704[1:1] = 0x00000001U - // .. ==> MASK : 0x00000002U VAL : 0x00000002U - // .. L1_SEL = 0 - // .. ==> 0XF8000704[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF8000704[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF8000704[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF8000704[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 3 - // .. ==> 0XF8000704[11:9] = 0x00000003U - // .. ==> MASK : 0x00000E00U VAL : 0x00000600U - // .. PULLUP = 0 - // .. ==> 0XF8000704[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000704[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000704, 0x00003FFFU ,0x00000602U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF8000708[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 1 - // .. ==> 0XF8000708[1:1] = 0x00000001U - // .. ==> MASK : 0x00000002U VAL : 0x00000002U - // .. L1_SEL = 0 - // .. ==> 0XF8000708[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF8000708[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF8000708[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF8000708[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 3 - // .. ==> 0XF8000708[11:9] = 0x00000003U - // .. ==> MASK : 0x00000E00U VAL : 0x00000600U - // .. PULLUP = 0 - // .. ==> 0XF8000708[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000708[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000708, 0x00003FFFU ,0x00000602U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF800070C[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 1 - // .. ==> 0XF800070C[1:1] = 0x00000001U - // .. ==> MASK : 0x00000002U VAL : 0x00000002U - // .. L1_SEL = 0 - // .. ==> 0XF800070C[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF800070C[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF800070C[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF800070C[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 3 - // .. ==> 0XF800070C[11:9] = 0x00000003U - // .. ==> MASK : 0x00000E00U VAL : 0x00000600U - // .. PULLUP = 0 - // .. ==> 0XF800070C[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF800070C[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF800070C, 0x00003FFFU ,0x00000602U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF8000710[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 1 - // .. ==> 0XF8000710[1:1] = 0x00000001U - // .. ==> MASK : 0x00000002U VAL : 0x00000002U - // .. L1_SEL = 0 - // .. ==> 0XF8000710[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF8000710[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF8000710[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF8000710[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 3 - // .. ==> 0XF8000710[11:9] = 0x00000003U - // .. ==> MASK : 0x00000E00U VAL : 0x00000600U - // .. PULLUP = 0 - // .. ==> 0XF8000710[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000710[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000710, 0x00003FFFU ,0x00000602U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF8000714[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 1 - // .. ==> 0XF8000714[1:1] = 0x00000001U - // .. ==> MASK : 0x00000002U VAL : 0x00000002U - // .. L1_SEL = 0 - // .. ==> 0XF8000714[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF8000714[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF8000714[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF8000714[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 3 - // .. ==> 0XF8000714[11:9] = 0x00000003U - // .. ==> MASK : 0x00000E00U VAL : 0x00000600U - // .. PULLUP = 0 - // .. ==> 0XF8000714[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000714[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000714, 0x00003FFFU ,0x00000602U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF8000718[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 1 - // .. ==> 0XF8000718[1:1] = 0x00000001U - // .. ==> MASK : 0x00000002U VAL : 0x00000002U - // .. L1_SEL = 0 - // .. ==> 0XF8000718[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF8000718[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF8000718[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF8000718[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 3 - // .. ==> 0XF8000718[11:9] = 0x00000003U - // .. ==> MASK : 0x00000E00U VAL : 0x00000600U - // .. PULLUP = 0 - // .. ==> 0XF8000718[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000718[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000718, 0x00003FFFU ,0x00000602U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF800071C[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF800071C[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 0 - // .. ==> 0XF800071C[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF800071C[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF800071C[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF800071C[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 3 - // .. ==> 0XF800071C[11:9] = 0x00000003U - // .. ==> MASK : 0x00000E00U VAL : 0x00000600U - // .. PULLUP = 0 - // .. ==> 0XF800071C[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF800071C[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF800071C, 0x00003FFFU ,0x00000600U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF8000720[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 1 - // .. ==> 0XF8000720[1:1] = 0x00000001U - // .. ==> MASK : 0x00000002U VAL : 0x00000002U - // .. L1_SEL = 0 - // .. ==> 0XF8000720[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF8000720[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF8000720[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF8000720[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 3 - // .. ==> 0XF8000720[11:9] = 0x00000003U - // .. ==> MASK : 0x00000E00U VAL : 0x00000600U - // .. PULLUP = 0 - // .. ==> 0XF8000720[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000720[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000720, 0x00003FFFU ,0x00000602U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF8000724[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF8000724[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 0 - // .. ==> 0XF8000724[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF8000724[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF8000724[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF8000724[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 3 - // .. ==> 0XF8000724[11:9] = 0x00000003U - // .. ==> MASK : 0x00000E00U VAL : 0x00000600U - // .. PULLUP = 0 - // .. ==> 0XF8000724[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000724[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000724, 0x00003FFFU ,0x00000600U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF8000728[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF8000728[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 0 - // .. ==> 0XF8000728[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF8000728[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 4 - // .. ==> 0XF8000728[7:5] = 0x00000004U - // .. ==> MASK : 0x000000E0U VAL : 0x00000080U - // .. Speed = 0 - // .. ==> 0XF8000728[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 3 - // .. ==> 0XF8000728[11:9] = 0x00000003U - // .. ==> MASK : 0x00000E00U VAL : 0x00000600U - // .. PULLUP = 0 - // .. ==> 0XF8000728[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000728[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000728, 0x00003FFFU ,0x00000680U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF800072C[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF800072C[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 0 - // .. ==> 0XF800072C[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF800072C[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 4 - // .. ==> 0XF800072C[7:5] = 0x00000004U - // .. ==> MASK : 0x000000E0U VAL : 0x00000080U - // .. Speed = 0 - // .. ==> 0XF800072C[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 3 - // .. ==> 0XF800072C[11:9] = 0x00000003U - // .. ==> MASK : 0x00000E00U VAL : 0x00000600U - // .. PULLUP = 0 - // .. ==> 0XF800072C[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF800072C[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF800072C, 0x00003FFFU ,0x00000680U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF8000730[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF8000730[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 0 - // .. ==> 0XF8000730[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF8000730[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 4 - // .. ==> 0XF8000730[7:5] = 0x00000004U - // .. ==> MASK : 0x000000E0U VAL : 0x00000080U - // .. Speed = 0 - // .. ==> 0XF8000730[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 3 - // .. ==> 0XF8000730[11:9] = 0x00000003U - // .. ==> MASK : 0x00000E00U VAL : 0x00000600U - // .. PULLUP = 0 - // .. ==> 0XF8000730[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000730[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000730, 0x00003FFFU ,0x00000680U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF8000734[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF8000734[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 0 - // .. ==> 0XF8000734[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF8000734[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 4 - // .. ==> 0XF8000734[7:5] = 0x00000004U - // .. ==> MASK : 0x000000E0U VAL : 0x00000080U - // .. Speed = 0 - // .. ==> 0XF8000734[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 3 - // .. ==> 0XF8000734[11:9] = 0x00000003U - // .. ==> MASK : 0x00000E00U VAL : 0x00000600U - // .. PULLUP = 0 - // .. ==> 0XF8000734[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000734[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000734, 0x00003FFFU ,0x00000680U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF8000738[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF8000738[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 0 - // .. ==> 0XF8000738[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF8000738[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 4 - // .. ==> 0XF8000738[7:5] = 0x00000004U - // .. ==> MASK : 0x000000E0U VAL : 0x00000080U - // .. Speed = 0 - // .. ==> 0XF8000738[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 3 - // .. ==> 0XF8000738[11:9] = 0x00000003U - // .. ==> MASK : 0x00000E00U VAL : 0x00000600U - // .. PULLUP = 0 - // .. ==> 0XF8000738[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000738[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000738, 0x00003FFFU ,0x00000680U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF800073C[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF800073C[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 0 - // .. ==> 0XF800073C[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF800073C[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 4 - // .. ==> 0XF800073C[7:5] = 0x00000004U - // .. ==> MASK : 0x000000E0U VAL : 0x00000080U - // .. Speed = 0 - // .. ==> 0XF800073C[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 3 - // .. ==> 0XF800073C[11:9] = 0x00000003U - // .. ==> MASK : 0x00000E00U VAL : 0x00000600U - // .. PULLUP = 0 - // .. ==> 0XF800073C[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF800073C[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF800073C, 0x00003FFFU ,0x00000680U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF8000740[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 1 - // .. ==> 0XF8000740[1:1] = 0x00000001U - // .. ==> MASK : 0x00000002U VAL : 0x00000002U - // .. L1_SEL = 0 - // .. ==> 0XF8000740[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF8000740[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF8000740[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF8000740[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF8000740[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF8000740[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000740[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000740, 0x00003FFFU ,0x00000202U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF8000744[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 1 - // .. ==> 0XF8000744[1:1] = 0x00000001U - // .. ==> MASK : 0x00000002U VAL : 0x00000002U - // .. L1_SEL = 0 - // .. ==> 0XF8000744[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF8000744[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF8000744[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF8000744[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF8000744[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF8000744[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000744[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000744, 0x00003FFFU ,0x00000202U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF8000748[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 1 - // .. ==> 0XF8000748[1:1] = 0x00000001U - // .. ==> MASK : 0x00000002U VAL : 0x00000002U - // .. L1_SEL = 0 - // .. ==> 0XF8000748[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF8000748[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF8000748[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF8000748[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF8000748[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF8000748[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000748[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000748, 0x00003FFFU ,0x00000202U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF800074C[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 1 - // .. ==> 0XF800074C[1:1] = 0x00000001U - // .. ==> MASK : 0x00000002U VAL : 0x00000002U - // .. L1_SEL = 0 - // .. ==> 0XF800074C[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF800074C[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF800074C[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF800074C[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF800074C[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF800074C[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF800074C[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF800074C, 0x00003FFFU ,0x00000202U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF8000750[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 1 - // .. ==> 0XF8000750[1:1] = 0x00000001U - // .. ==> MASK : 0x00000002U VAL : 0x00000002U - // .. L1_SEL = 0 - // .. ==> 0XF8000750[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF8000750[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF8000750[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF8000750[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF8000750[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF8000750[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000750[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000750, 0x00003FFFU ,0x00000202U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF8000754[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 1 - // .. ==> 0XF8000754[1:1] = 0x00000001U - // .. ==> MASK : 0x00000002U VAL : 0x00000002U - // .. L1_SEL = 0 - // .. ==> 0XF8000754[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF8000754[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF8000754[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF8000754[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF8000754[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF8000754[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000754[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000754, 0x00003FFFU ,0x00000202U), - // .. TRI_ENABLE = 1 - // .. ==> 0XF8000758[0:0] = 0x00000001U - // .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. L0_SEL = 1 - // .. ==> 0XF8000758[1:1] = 0x00000001U - // .. ==> MASK : 0x00000002U VAL : 0x00000002U - // .. L1_SEL = 0 - // .. ==> 0XF8000758[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF8000758[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF8000758[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF8000758[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF8000758[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF8000758[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000758[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000758, 0x00003FFFU ,0x00000203U), - // .. TRI_ENABLE = 1 - // .. ==> 0XF800075C[0:0] = 0x00000001U - // .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. L0_SEL = 1 - // .. ==> 0XF800075C[1:1] = 0x00000001U - // .. ==> MASK : 0x00000002U VAL : 0x00000002U - // .. L1_SEL = 0 - // .. ==> 0XF800075C[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF800075C[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF800075C[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF800075C[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF800075C[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF800075C[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF800075C[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF800075C, 0x00003FFFU ,0x00000203U), - // .. TRI_ENABLE = 1 - // .. ==> 0XF8000760[0:0] = 0x00000001U - // .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. L0_SEL = 1 - // .. ==> 0XF8000760[1:1] = 0x00000001U - // .. ==> MASK : 0x00000002U VAL : 0x00000002U - // .. L1_SEL = 0 - // .. ==> 0XF8000760[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF8000760[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF8000760[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF8000760[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF8000760[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF8000760[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000760[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000760, 0x00003FFFU ,0x00000203U), - // .. TRI_ENABLE = 1 - // .. ==> 0XF8000764[0:0] = 0x00000001U - // .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. L0_SEL = 1 - // .. ==> 0XF8000764[1:1] = 0x00000001U - // .. ==> MASK : 0x00000002U VAL : 0x00000002U - // .. L1_SEL = 0 - // .. ==> 0XF8000764[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF8000764[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF8000764[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF8000764[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF8000764[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF8000764[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000764[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000764, 0x00003FFFU ,0x00000203U), - // .. TRI_ENABLE = 1 - // .. ==> 0XF8000768[0:0] = 0x00000001U - // .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. L0_SEL = 1 - // .. ==> 0XF8000768[1:1] = 0x00000001U - // .. ==> MASK : 0x00000002U VAL : 0x00000002U - // .. L1_SEL = 0 - // .. ==> 0XF8000768[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF8000768[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF8000768[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF8000768[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF8000768[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF8000768[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000768[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000768, 0x00003FFFU ,0x00000203U), - // .. TRI_ENABLE = 1 - // .. ==> 0XF800076C[0:0] = 0x00000001U - // .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. L0_SEL = 1 - // .. ==> 0XF800076C[1:1] = 0x00000001U - // .. ==> MASK : 0x00000002U VAL : 0x00000002U - // .. L1_SEL = 0 - // .. ==> 0XF800076C[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF800076C[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF800076C[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF800076C[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF800076C[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF800076C[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF800076C[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF800076C, 0x00003FFFU ,0x00000203U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF8000770[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF8000770[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 1 - // .. ==> 0XF8000770[2:2] = 0x00000001U - // .. ==> MASK : 0x00000004U VAL : 0x00000004U - // .. L2_SEL = 0 - // .. ==> 0XF8000770[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF8000770[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF8000770[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF8000770[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF8000770[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000770[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000770, 0x00003FFFU ,0x00000204U), - // .. TRI_ENABLE = 1 - // .. ==> 0XF8000774[0:0] = 0x00000001U - // .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. L0_SEL = 0 - // .. ==> 0XF8000774[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 1 - // .. ==> 0XF8000774[2:2] = 0x00000001U - // .. ==> MASK : 0x00000004U VAL : 0x00000004U - // .. L2_SEL = 0 - // .. ==> 0XF8000774[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF8000774[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF8000774[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF8000774[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF8000774[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000774[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000774, 0x00003FFFU ,0x00000205U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF8000778[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF8000778[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 1 - // .. ==> 0XF8000778[2:2] = 0x00000001U - // .. ==> MASK : 0x00000004U VAL : 0x00000004U - // .. L2_SEL = 0 - // .. ==> 0XF8000778[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF8000778[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF8000778[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF8000778[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF8000778[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000778[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000778, 0x00003FFFU ,0x00000204U), - // .. TRI_ENABLE = 1 - // .. ==> 0XF800077C[0:0] = 0x00000001U - // .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. L0_SEL = 0 - // .. ==> 0XF800077C[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 1 - // .. ==> 0XF800077C[2:2] = 0x00000001U - // .. ==> MASK : 0x00000004U VAL : 0x00000004U - // .. L2_SEL = 0 - // .. ==> 0XF800077C[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF800077C[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF800077C[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF800077C[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF800077C[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF800077C[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF800077C, 0x00003FFFU ,0x00000205U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF8000780[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF8000780[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 1 - // .. ==> 0XF8000780[2:2] = 0x00000001U - // .. ==> MASK : 0x00000004U VAL : 0x00000004U - // .. L2_SEL = 0 - // .. ==> 0XF8000780[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF8000780[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF8000780[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF8000780[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF8000780[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000780[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000780, 0x00003FFFU ,0x00000204U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF8000784[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF8000784[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 1 - // .. ==> 0XF8000784[2:2] = 0x00000001U - // .. ==> MASK : 0x00000004U VAL : 0x00000004U - // .. L2_SEL = 0 - // .. ==> 0XF8000784[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF8000784[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF8000784[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF8000784[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF8000784[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000784[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000784, 0x00003FFFU ,0x00000204U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF8000788[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF8000788[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 1 - // .. ==> 0XF8000788[2:2] = 0x00000001U - // .. ==> MASK : 0x00000004U VAL : 0x00000004U - // .. L2_SEL = 0 - // .. ==> 0XF8000788[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF8000788[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF8000788[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF8000788[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF8000788[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000788[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000788, 0x00003FFFU ,0x00000204U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF800078C[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF800078C[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 1 - // .. ==> 0XF800078C[2:2] = 0x00000001U - // .. ==> MASK : 0x00000004U VAL : 0x00000004U - // .. L2_SEL = 0 - // .. ==> 0XF800078C[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF800078C[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF800078C[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF800078C[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF800078C[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF800078C[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF800078C, 0x00003FFFU ,0x00000204U), - // .. TRI_ENABLE = 1 - // .. ==> 0XF8000790[0:0] = 0x00000001U - // .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. L0_SEL = 0 - // .. ==> 0XF8000790[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 1 - // .. ==> 0XF8000790[2:2] = 0x00000001U - // .. ==> MASK : 0x00000004U VAL : 0x00000004U - // .. L2_SEL = 0 - // .. ==> 0XF8000790[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF8000790[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF8000790[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF8000790[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF8000790[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000790[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000790, 0x00003FFFU ,0x00000205U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF8000794[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF8000794[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 1 - // .. ==> 0XF8000794[2:2] = 0x00000001U - // .. ==> MASK : 0x00000004U VAL : 0x00000004U - // .. L2_SEL = 0 - // .. ==> 0XF8000794[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF8000794[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF8000794[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF8000794[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF8000794[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000794[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000794, 0x00003FFFU ,0x00000204U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF8000798[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF8000798[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 1 - // .. ==> 0XF8000798[2:2] = 0x00000001U - // .. ==> MASK : 0x00000004U VAL : 0x00000004U - // .. L2_SEL = 0 - // .. ==> 0XF8000798[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF8000798[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF8000798[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF8000798[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF8000798[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000798[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000798, 0x00003FFFU ,0x00000204U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF800079C[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF800079C[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 1 - // .. ==> 0XF800079C[2:2] = 0x00000001U - // .. ==> MASK : 0x00000004U VAL : 0x00000004U - // .. L2_SEL = 0 - // .. ==> 0XF800079C[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF800079C[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF800079C[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF800079C[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF800079C[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF800079C[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF800079C, 0x00003FFFU ,0x00000204U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF80007A0[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF80007A0[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 0 - // .. ==> 0XF80007A0[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF80007A0[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF80007A0[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF80007A0[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF80007A0[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF80007A0[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF80007A0[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF80007A0, 0x00003FFFU ,0x00000200U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF80007A4[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF80007A4[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 0 - // .. ==> 0XF80007A4[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF80007A4[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF80007A4[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF80007A4[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF80007A4[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF80007A4[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF80007A4[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF80007A4, 0x00003FFFU ,0x00000200U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF80007A8[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF80007A8[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 0 - // .. ==> 0XF80007A8[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF80007A8[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF80007A8[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF80007A8[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF80007A8[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF80007A8[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF80007A8[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF80007A8, 0x00003FFFU ,0x00000200U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF80007AC[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF80007AC[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 0 - // .. ==> 0XF80007AC[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF80007AC[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF80007AC[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF80007AC[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF80007AC[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF80007AC[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF80007AC[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF80007AC, 0x00003FFFU ,0x00000200U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF80007B0[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF80007B0[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 0 - // .. ==> 0XF80007B0[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF80007B0[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF80007B0[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF80007B0[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF80007B0[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF80007B0[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF80007B0[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF80007B0, 0x00003FFFU ,0x00000200U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF80007B4[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF80007B4[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 0 - // .. ==> 0XF80007B4[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF80007B4[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF80007B4[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF80007B4[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF80007B4[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF80007B4[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF80007B4[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF80007B4, 0x00003FFFU ,0x00000200U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF80007B8[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF80007B8[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 0 - // .. ==> 0XF80007B8[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF80007B8[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF80007B8[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF80007B8[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF80007B8[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF80007B8[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF80007B8[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF80007B8, 0x00003FFFU ,0x00000200U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF80007BC[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF80007BC[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 0 - // .. ==> 0XF80007BC[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF80007BC[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF80007BC[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF80007BC[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF80007BC[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF80007BC[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF80007BC[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF80007BC, 0x00003FFFU ,0x00000200U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF80007C0[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF80007C0[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 0 - // .. ==> 0XF80007C0[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF80007C0[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 7 - // .. ==> 0XF80007C0[7:5] = 0x00000007U - // .. ==> MASK : 0x000000E0U VAL : 0x000000E0U - // .. Speed = 0 - // .. ==> 0XF80007C0[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF80007C0[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF80007C0[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF80007C0[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF80007C0, 0x00003FFFU ,0x000002E0U), - // .. TRI_ENABLE = 1 - // .. ==> 0XF80007C4[0:0] = 0x00000001U - // .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. L0_SEL = 0 - // .. ==> 0XF80007C4[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 0 - // .. ==> 0XF80007C4[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF80007C4[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 7 - // .. ==> 0XF80007C4[7:5] = 0x00000007U - // .. ==> MASK : 0x000000E0U VAL : 0x000000E0U - // .. Speed = 0 - // .. ==> 0XF80007C4[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF80007C4[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF80007C4[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF80007C4[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF80007C4, 0x00003FFFU ,0x000002E1U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF80007C8[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF80007C8[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 0 - // .. ==> 0XF80007C8[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF80007C8[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF80007C8[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF80007C8[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF80007C8[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF80007C8[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF80007C8[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF80007C8, 0x00003FFFU ,0x00000200U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF80007CC[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF80007CC[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 0 - // .. ==> 0XF80007CC[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF80007CC[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF80007CC[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF80007CC[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF80007CC[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF80007CC[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF80007CC[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF80007CC, 0x00003FFFU ,0x00000200U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF80007D0[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF80007D0[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 0 - // .. ==> 0XF80007D0[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF80007D0[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 4 - // .. ==> 0XF80007D0[7:5] = 0x00000004U - // .. ==> MASK : 0x000000E0U VAL : 0x00000080U - // .. Speed = 0 - // .. ==> 0XF80007D0[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF80007D0[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF80007D0[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF80007D0[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF80007D0, 0x00003FFFU ,0x00000280U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF80007D4[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF80007D4[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 0 - // .. ==> 0XF80007D4[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF80007D4[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 4 - // .. ==> 0XF80007D4[7:5] = 0x00000004U - // .. ==> MASK : 0x000000E0U VAL : 0x00000080U - // .. Speed = 0 - // .. ==> 0XF80007D4[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF80007D4[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF80007D4[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF80007D4[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF80007D4, 0x00003FFFU ,0x00000280U), - // .. SDIO1_CD_SEL = 58 - // .. ==> 0XF8000834[21:16] = 0x0000003AU - // .. ==> MASK : 0x003F0000U VAL : 0x003A0000U - // .. - EMIT_MASKWRITE(0XF8000834, 0x003F0000U ,0x003A0000U), - // .. FINISH: MIO PROGRAMMING - // .. START: LOCK IT BACK - // .. LOCK_KEY = 0X767B - // .. ==> 0XF8000004[15:0] = 0x0000767BU - // .. ==> MASK : 0x0000FFFFU VAL : 0x0000767BU - // .. - EMIT_MASKWRITE(0XF8000004, 0x0000FFFFU ,0x0000767BU), - // .. FINISH: LOCK IT BACK - // FINISH: top - // - EMIT_EXIT(), - - // -}; - -unsigned long ps7_peripherals_init_data_3_0[] = { - // START: top - // .. START: SLCR SETTINGS - // .. UNLOCK_KEY = 0XDF0D - // .. ==> 0XF8000008[15:0] = 0x0000DF0DU - // .. ==> MASK : 0x0000FFFFU VAL : 0x0000DF0DU - // .. - EMIT_MASKWRITE(0XF8000008, 0x0000FFFFU ,0x0000DF0DU), - // .. FINISH: SLCR SETTINGS - // .. START: DDR TERM/IBUF_DISABLE_MODE SETTINGS - // .. IBUF_DISABLE_MODE = 0x1 - // .. ==> 0XF8000B48[7:7] = 0x00000001U - // .. ==> MASK : 0x00000080U VAL : 0x00000080U - // .. TERM_DISABLE_MODE = 0x1 - // .. ==> 0XF8000B48[8:8] = 0x00000001U - // .. ==> MASK : 0x00000100U VAL : 0x00000100U - // .. - EMIT_MASKWRITE(0XF8000B48, 0x00000180U ,0x00000180U), - // .. IBUF_DISABLE_MODE = 0x1 - // .. ==> 0XF8000B4C[7:7] = 0x00000001U - // .. ==> MASK : 0x00000080U VAL : 0x00000080U - // .. TERM_DISABLE_MODE = 0x1 - // .. ==> 0XF8000B4C[8:8] = 0x00000001U - // .. ==> MASK : 0x00000100U VAL : 0x00000100U - // .. - EMIT_MASKWRITE(0XF8000B4C, 0x00000180U ,0x00000180U), - // .. IBUF_DISABLE_MODE = 0x1 - // .. ==> 0XF8000B50[7:7] = 0x00000001U - // .. ==> MASK : 0x00000080U VAL : 0x00000080U - // .. TERM_DISABLE_MODE = 0x1 - // .. ==> 0XF8000B50[8:8] = 0x00000001U - // .. ==> MASK : 0x00000100U VAL : 0x00000100U - // .. - EMIT_MASKWRITE(0XF8000B50, 0x00000180U ,0x00000180U), - // .. IBUF_DISABLE_MODE = 0x1 - // .. ==> 0XF8000B54[7:7] = 0x00000001U - // .. ==> MASK : 0x00000080U VAL : 0x00000080U - // .. TERM_DISABLE_MODE = 0x1 - // .. ==> 0XF8000B54[8:8] = 0x00000001U - // .. ==> MASK : 0x00000100U VAL : 0x00000100U - // .. - EMIT_MASKWRITE(0XF8000B54, 0x00000180U ,0x00000180U), - // .. FINISH: DDR TERM/IBUF_DISABLE_MODE SETTINGS - // .. START: LOCK IT BACK - // .. LOCK_KEY = 0X767B - // .. ==> 0XF8000004[15:0] = 0x0000767BU - // .. ==> MASK : 0x0000FFFFU VAL : 0x0000767BU - // .. - EMIT_MASKWRITE(0XF8000004, 0x0000FFFFU ,0x0000767BU), - // .. FINISH: LOCK IT BACK - // .. START: SRAM/NOR SET OPMODE - // .. FINISH: SRAM/NOR SET OPMODE - // .. START: UART REGISTERS - // .. BDIV = 0x6 - // .. ==> 0XE0001034[7:0] = 0x00000006U - // .. ==> MASK : 0x000000FFU VAL : 0x00000006U - // .. - EMIT_MASKWRITE(0XE0001034, 0x000000FFU ,0x00000006U), - // .. CD = 0x3e - // .. ==> 0XE0001018[15:0] = 0x0000003EU - // .. ==> MASK : 0x0000FFFFU VAL : 0x0000003EU - // .. - EMIT_MASKWRITE(0XE0001018, 0x0000FFFFU ,0x0000003EU), - // .. STPBRK = 0x0 - // .. ==> 0XE0001000[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. STTBRK = 0x0 - // .. ==> 0XE0001000[7:7] = 0x00000000U - // .. ==> MASK : 0x00000080U VAL : 0x00000000U - // .. RSTTO = 0x0 - // .. ==> 0XE0001000[6:6] = 0x00000000U - // .. ==> MASK : 0x00000040U VAL : 0x00000000U - // .. TXDIS = 0x0 - // .. ==> 0XE0001000[5:5] = 0x00000000U - // .. ==> MASK : 0x00000020U VAL : 0x00000000U - // .. TXEN = 0x1 - // .. ==> 0XE0001000[4:4] = 0x00000001U - // .. ==> MASK : 0x00000010U VAL : 0x00000010U - // .. RXDIS = 0x0 - // .. ==> 0XE0001000[3:3] = 0x00000000U - // .. ==> MASK : 0x00000008U VAL : 0x00000000U - // .. RXEN = 0x1 - // .. ==> 0XE0001000[2:2] = 0x00000001U - // .. ==> MASK : 0x00000004U VAL : 0x00000004U - // .. TXRES = 0x1 - // .. ==> 0XE0001000[1:1] = 0x00000001U - // .. ==> MASK : 0x00000002U VAL : 0x00000002U - // .. RXRES = 0x1 - // .. ==> 0XE0001000[0:0] = 0x00000001U - // .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. - EMIT_MASKWRITE(0XE0001000, 0x000001FFU ,0x00000017U), - // .. CHMODE = 0x0 - // .. ==> 0XE0001004[9:8] = 0x00000000U - // .. ==> MASK : 0x00000300U VAL : 0x00000000U - // .. NBSTOP = 0x0 - // .. ==> 0XE0001004[7:6] = 0x00000000U - // .. ==> MASK : 0x000000C0U VAL : 0x00000000U - // .. PAR = 0x4 - // .. ==> 0XE0001004[5:3] = 0x00000004U - // .. ==> MASK : 0x00000038U VAL : 0x00000020U - // .. CHRL = 0x0 - // .. ==> 0XE0001004[2:1] = 0x00000000U - // .. ==> MASK : 0x00000006U VAL : 0x00000000U - // .. CLKS = 0x0 - // .. ==> 0XE0001004[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XE0001004, 0x000003FFU ,0x00000020U), - // .. FINISH: UART REGISTERS - // .. START: TPIU WIDTH IN CASE OF EMIO - // .. .. START: TRACE LOCK ACCESS REGISTER - // .. .. a = 0XC5ACCE55 - // .. .. ==> 0XF8803FB0[31:0] = 0xC5ACCE55U - // .. .. ==> MASK : 0xFFFFFFFFU VAL : 0xC5ACCE55U - // .. .. - EMIT_MASKWRITE(0XF8803FB0, 0xFFFFFFFFU ,0xC5ACCE55U), - // .. .. FINISH: TRACE LOCK ACCESS REGISTER - // .. .. START: TRACE CURRENT PORT SIZE - // .. .. a = 2 - // .. .. ==> 0XF8803004[31:0] = 0x00000002U - // .. .. ==> MASK : 0xFFFFFFFFU VAL : 0x00000002U - // .. .. - EMIT_MASKWRITE(0XF8803004, 0xFFFFFFFFU ,0x00000002U), - // .. .. FINISH: TRACE CURRENT PORT SIZE - // .. .. START: TRACE LOCK ACCESS REGISTER - // .. .. a = 0X0 - // .. .. ==> 0XF8803FB0[31:0] = 0x00000000U - // .. .. ==> MASK : 0xFFFFFFFFU VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8803FB0, 0xFFFFFFFFU ,0x00000000U), - // .. .. FINISH: TRACE LOCK ACCESS REGISTER - // .. FINISH: TPIU WIDTH IN CASE OF EMIO - // .. START: QSPI REGISTERS - // .. Holdb_dr = 1 - // .. ==> 0XE000D000[19:19] = 0x00000001U - // .. ==> MASK : 0x00080000U VAL : 0x00080000U - // .. - EMIT_MASKWRITE(0XE000D000, 0x00080000U ,0x00080000U), - // .. FINISH: QSPI REGISTERS - // .. START: PL POWER ON RESET REGISTERS - // .. PCFG_POR_CNT_4K = 0 - // .. ==> 0XF8007000[29:29] = 0x00000000U - // .. ==> MASK : 0x20000000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8007000, 0x20000000U ,0x00000000U), - // .. FINISH: PL POWER ON RESET REGISTERS - // .. START: SMC TIMING CALCULATION REGISTER UPDATE - // .. .. START: NAND SET CYCLE - // .. .. FINISH: NAND SET CYCLE - // .. .. START: OPMODE - // .. .. FINISH: OPMODE - // .. .. START: DIRECT COMMAND - // .. .. FINISH: DIRECT COMMAND - // .. .. START: SRAM/NOR CS0 SET CYCLE - // .. .. FINISH: SRAM/NOR CS0 SET CYCLE - // .. .. START: DIRECT COMMAND - // .. .. FINISH: DIRECT COMMAND - // .. .. START: NOR CS0 BASE ADDRESS - // .. .. FINISH: NOR CS0 BASE ADDRESS - // .. .. START: SRAM/NOR CS1 SET CYCLE - // .. .. FINISH: SRAM/NOR CS1 SET CYCLE - // .. .. START: DIRECT COMMAND - // .. .. FINISH: DIRECT COMMAND - // .. .. START: NOR CS1 BASE ADDRESS - // .. .. FINISH: NOR CS1 BASE ADDRESS - // .. .. START: USB RESET - // .. .. .. START: USB0 RESET - // .. .. .. .. START: DIR MODE BANK 0 - // .. .. .. .. DIRECTION_0 = 0x80 - // .. .. .. .. ==> 0XE000A204[31:0] = 0x00000080U - // .. .. .. .. ==> MASK : 0xFFFFFFFFU VAL : 0x00000080U - // .. .. .. .. - EMIT_MASKWRITE(0XE000A204, 0xFFFFFFFFU ,0x00000080U), - // .. .. .. .. FINISH: DIR MODE BANK 0 - // .. .. .. .. START: DIR MODE BANK 1 - // .. .. .. .. FINISH: DIR MODE BANK 1 - // .. .. .. .. START: MASK_DATA_0_LSW HIGH BANK [15:0] - // .. .. .. .. MASK_0_LSW = 0xff7f - // .. .. .. .. ==> 0XE000A000[31:16] = 0x0000FF7FU - // .. .. .. .. ==> MASK : 0xFFFF0000U VAL : 0xFF7F0000U - // .. .. .. .. DATA_0_LSW = 0x80 - // .. .. .. .. ==> 0XE000A000[15:0] = 0x00000080U - // .. .. .. .. ==> MASK : 0x0000FFFFU VAL : 0x00000080U - // .. .. .. .. - EMIT_MASKWRITE(0XE000A000, 0xFFFFFFFFU ,0xFF7F0080U), - // .. .. .. .. FINISH: MASK_DATA_0_LSW HIGH BANK [15:0] - // .. .. .. .. START: MASK_DATA_0_MSW HIGH BANK [31:16] - // .. .. .. .. FINISH: MASK_DATA_0_MSW HIGH BANK [31:16] - // .. .. .. .. START: MASK_DATA_1_LSW HIGH BANK [47:32] - // .. .. .. .. FINISH: MASK_DATA_1_LSW HIGH BANK [47:32] - // .. .. .. .. START: MASK_DATA_1_MSW HIGH BANK [53:48] - // .. .. .. .. FINISH: MASK_DATA_1_MSW HIGH BANK [53:48] - // .. .. .. .. START: OUTPUT ENABLE BANK 0 - // .. .. .. .. OP_ENABLE_0 = 0x80 - // .. .. .. .. ==> 0XE000A208[31:0] = 0x00000080U - // .. .. .. .. ==> MASK : 0xFFFFFFFFU VAL : 0x00000080U - // .. .. .. .. - EMIT_MASKWRITE(0XE000A208, 0xFFFFFFFFU ,0x00000080U), - // .. .. .. .. FINISH: OUTPUT ENABLE BANK 0 - // .. .. .. .. START: OUTPUT ENABLE BANK 1 - // .. .. .. .. FINISH: OUTPUT ENABLE BANK 1 - // .. .. .. .. START: MASK_DATA_0_LSW LOW BANK [15:0] - // .. .. .. .. MASK_0_LSW = 0xff7f - // .. .. .. .. ==> 0XE000A000[31:16] = 0x0000FF7FU - // .. .. .. .. ==> MASK : 0xFFFF0000U VAL : 0xFF7F0000U - // .. .. .. .. DATA_0_LSW = 0x0 - // .. .. .. .. ==> 0XE000A000[15:0] = 0x00000000U - // .. .. .. .. ==> MASK : 0x0000FFFFU VAL : 0x00000000U - // .. .. .. .. - EMIT_MASKWRITE(0XE000A000, 0xFFFFFFFFU ,0xFF7F0000U), - // .. .. .. .. FINISH: MASK_DATA_0_LSW LOW BANK [15:0] - // .. .. .. .. START: MASK_DATA_0_MSW LOW BANK [31:16] - // .. .. .. .. FINISH: MASK_DATA_0_MSW LOW BANK [31:16] - // .. .. .. .. START: MASK_DATA_1_LSW LOW BANK [47:32] - // .. .. .. .. FINISH: MASK_DATA_1_LSW LOW BANK [47:32] - // .. .. .. .. START: MASK_DATA_1_MSW LOW BANK [53:48] - // .. .. .. .. FINISH: MASK_DATA_1_MSW LOW BANK [53:48] - // .. .. .. .. START: ADD 1 MS DELAY - // .. .. .. .. - EMIT_MASKDELAY(0XF8F00200, 1), - // .. .. .. .. FINISH: ADD 1 MS DELAY - // .. .. .. .. START: MASK_DATA_0_LSW HIGH BANK [15:0] - // .. .. .. .. MASK_0_LSW = 0xff7f - // .. .. .. .. ==> 0XE000A000[31:16] = 0x0000FF7FU - // .. .. .. .. ==> MASK : 0xFFFF0000U VAL : 0xFF7F0000U - // .. .. .. .. DATA_0_LSW = 0x80 - // .. .. .. .. ==> 0XE000A000[15:0] = 0x00000080U - // .. .. .. .. ==> MASK : 0x0000FFFFU VAL : 0x00000080U - // .. .. .. .. - EMIT_MASKWRITE(0XE000A000, 0xFFFFFFFFU ,0xFF7F0080U), - // .. .. .. .. FINISH: MASK_DATA_0_LSW HIGH BANK [15:0] - // .. .. .. .. START: MASK_DATA_0_MSW HIGH BANK [31:16] - // .. .. .. .. FINISH: MASK_DATA_0_MSW HIGH BANK [31:16] - // .. .. .. .. START: MASK_DATA_1_LSW HIGH BANK [47:32] - // .. .. .. .. FINISH: MASK_DATA_1_LSW HIGH BANK [47:32] - // .. .. .. .. START: MASK_DATA_1_MSW HIGH BANK [53:48] - // .. .. .. .. FINISH: MASK_DATA_1_MSW HIGH BANK [53:48] - // .. .. .. FINISH: USB0 RESET - // .. .. .. START: USB1 RESET - // .. .. .. .. START: DIR MODE BANK 0 - // .. .. .. .. FINISH: DIR MODE BANK 0 - // .. .. .. .. START: DIR MODE BANK 1 - // .. .. .. .. FINISH: DIR MODE BANK 1 - // .. .. .. .. START: MASK_DATA_0_LSW HIGH BANK [15:0] - // .. .. .. .. FINISH: MASK_DATA_0_LSW HIGH BANK [15:0] - // .. .. .. .. START: MASK_DATA_0_MSW HIGH BANK [31:16] - // .. .. .. .. FINISH: MASK_DATA_0_MSW HIGH BANK [31:16] - // .. .. .. .. START: MASK_DATA_1_LSW HIGH BANK [47:32] - // .. .. .. .. FINISH: MASK_DATA_1_LSW HIGH BANK [47:32] - // .. .. .. .. START: MASK_DATA_1_MSW HIGH BANK [53:48] - // .. .. .. .. FINISH: MASK_DATA_1_MSW HIGH BANK [53:48] - // .. .. .. .. START: OUTPUT ENABLE BANK 0 - // .. .. .. .. FINISH: OUTPUT ENABLE BANK 0 - // .. .. .. .. START: OUTPUT ENABLE BANK 1 - // .. .. .. .. FINISH: OUTPUT ENABLE BANK 1 - // .. .. .. .. START: MASK_DATA_0_LSW LOW BANK [15:0] - // .. .. .. .. FINISH: MASK_DATA_0_LSW LOW BANK [15:0] - // .. .. .. .. START: MASK_DATA_0_MSW LOW BANK [31:16] - // .. .. .. .. FINISH: MASK_DATA_0_MSW LOW BANK [31:16] - // .. .. .. .. START: MASK_DATA_1_LSW LOW BANK [47:32] - // .. .. .. .. FINISH: MASK_DATA_1_LSW LOW BANK [47:32] - // .. .. .. .. START: MASK_DATA_1_MSW LOW BANK [53:48] - // .. .. .. .. FINISH: MASK_DATA_1_MSW LOW BANK [53:48] - // .. .. .. .. START: ADD 1 MS DELAY - // .. .. .. .. - EMIT_MASKDELAY(0XF8F00200, 1), - // .. .. .. .. FINISH: ADD 1 MS DELAY - // .. .. .. .. START: MASK_DATA_0_LSW HIGH BANK [15:0] - // .. .. .. .. FINISH: MASK_DATA_0_LSW HIGH BANK [15:0] - // .. .. .. .. START: MASK_DATA_0_MSW HIGH BANK [31:16] - // .. .. .. .. FINISH: MASK_DATA_0_MSW HIGH BANK [31:16] - // .. .. .. .. START: MASK_DATA_1_LSW HIGH BANK [47:32] - // .. .. .. .. FINISH: MASK_DATA_1_LSW HIGH BANK [47:32] - // .. .. .. .. START: MASK_DATA_1_MSW HIGH BANK [53:48] - // .. .. .. .. FINISH: MASK_DATA_1_MSW HIGH BANK [53:48] - // .. .. .. FINISH: USB1 RESET - // .. .. FINISH: USB RESET - // .. .. START: ENET RESET - // .. .. .. START: ENET0 RESET - // .. .. .. .. START: DIR MODE BANK 0 - // .. .. .. .. FINISH: DIR MODE BANK 0 - // .. .. .. .. START: DIR MODE BANK 1 - // .. .. .. .. FINISH: DIR MODE BANK 1 - // .. .. .. .. START: MASK_DATA_0_LSW HIGH BANK [15:0] - // .. .. .. .. FINISH: MASK_DATA_0_LSW HIGH BANK [15:0] - // .. .. .. .. START: MASK_DATA_0_MSW HIGH BANK [31:16] - // .. .. .. .. FINISH: MASK_DATA_0_MSW HIGH BANK [31:16] - // .. .. .. .. START: MASK_DATA_1_LSW HIGH BANK [47:32] - // .. .. .. .. FINISH: MASK_DATA_1_LSW HIGH BANK [47:32] - // .. .. .. .. START: MASK_DATA_1_MSW HIGH BANK [53:48] - // .. .. .. .. FINISH: MASK_DATA_1_MSW HIGH BANK [53:48] - // .. .. .. .. START: OUTPUT ENABLE BANK 0 - // .. .. .. .. FINISH: OUTPUT ENABLE BANK 0 - // .. .. .. .. START: OUTPUT ENABLE BANK 1 - // .. .. .. .. FINISH: OUTPUT ENABLE BANK 1 - // .. .. .. .. START: MASK_DATA_0_LSW LOW BANK [15:0] - // .. .. .. .. FINISH: MASK_DATA_0_LSW LOW BANK [15:0] - // .. .. .. .. START: MASK_DATA_0_MSW LOW BANK [31:16] - // .. .. .. .. FINISH: MASK_DATA_0_MSW LOW BANK [31:16] - // .. .. .. .. START: MASK_DATA_1_LSW LOW BANK [47:32] - // .. .. .. .. FINISH: MASK_DATA_1_LSW LOW BANK [47:32] - // .. .. .. .. START: MASK_DATA_1_MSW LOW BANK [53:48] - // .. .. .. .. FINISH: MASK_DATA_1_MSW LOW BANK [53:48] - // .. .. .. .. START: ADD 1 MS DELAY - // .. .. .. .. - EMIT_MASKDELAY(0XF8F00200, 1), - // .. .. .. .. FINISH: ADD 1 MS DELAY - // .. .. .. .. START: MASK_DATA_0_LSW HIGH BANK [15:0] - // .. .. .. .. FINISH: MASK_DATA_0_LSW HIGH BANK [15:0] - // .. .. .. .. START: MASK_DATA_0_MSW HIGH BANK [31:16] - // .. .. .. .. FINISH: MASK_DATA_0_MSW HIGH BANK [31:16] - // .. .. .. .. START: MASK_DATA_1_LSW HIGH BANK [47:32] - // .. .. .. .. FINISH: MASK_DATA_1_LSW HIGH BANK [47:32] - // .. .. .. .. START: MASK_DATA_1_MSW HIGH BANK [53:48] - // .. .. .. .. FINISH: MASK_DATA_1_MSW HIGH BANK [53:48] - // .. .. .. FINISH: ENET0 RESET - // .. .. .. START: ENET1 RESET - // .. .. .. .. START: DIR MODE BANK 0 - // .. .. .. .. FINISH: DIR MODE BANK 0 - // .. .. .. .. START: DIR MODE BANK 1 - // .. .. .. .. FINISH: DIR MODE BANK 1 - // .. .. .. .. START: MASK_DATA_0_LSW HIGH BANK [15:0] - // .. .. .. .. FINISH: MASK_DATA_0_LSW HIGH BANK [15:0] - // .. .. .. .. START: MASK_DATA_0_MSW HIGH BANK [31:16] - // .. .. .. .. FINISH: MASK_DATA_0_MSW HIGH BANK [31:16] - // .. .. .. .. START: MASK_DATA_1_LSW HIGH BANK [47:32] - // .. .. .. .. FINISH: MASK_DATA_1_LSW HIGH BANK [47:32] - // .. .. .. .. START: MASK_DATA_1_MSW HIGH BANK [53:48] - // .. .. .. .. FINISH: MASK_DATA_1_MSW HIGH BANK [53:48] - // .. .. .. .. START: OUTPUT ENABLE BANK 0 - // .. .. .. .. FINISH: OUTPUT ENABLE BANK 0 - // .. .. .. .. START: OUTPUT ENABLE BANK 1 - // .. .. .. .. FINISH: OUTPUT ENABLE BANK 1 - // .. .. .. .. START: MASK_DATA_0_LSW LOW BANK [15:0] - // .. .. .. .. FINISH: MASK_DATA_0_LSW LOW BANK [15:0] - // .. .. .. .. START: MASK_DATA_0_MSW LOW BANK [31:16] - // .. .. .. .. FINISH: MASK_DATA_0_MSW LOW BANK [31:16] - // .. .. .. .. START: MASK_DATA_1_LSW LOW BANK [47:32] - // .. .. .. .. FINISH: MASK_DATA_1_LSW LOW BANK [47:32] - // .. .. .. .. START: MASK_DATA_1_MSW LOW BANK [53:48] - // .. .. .. .. FINISH: MASK_DATA_1_MSW LOW BANK [53:48] - // .. .. .. .. START: ADD 1 MS DELAY - // .. .. .. .. - EMIT_MASKDELAY(0XF8F00200, 1), - // .. .. .. .. FINISH: ADD 1 MS DELAY - // .. .. .. .. START: MASK_DATA_0_LSW HIGH BANK [15:0] - // .. .. .. .. FINISH: MASK_DATA_0_LSW HIGH BANK [15:0] - // .. .. .. .. START: MASK_DATA_0_MSW HIGH BANK [31:16] - // .. .. .. .. FINISH: MASK_DATA_0_MSW HIGH BANK [31:16] - // .. .. .. .. START: MASK_DATA_1_LSW HIGH BANK [47:32] - // .. .. .. .. FINISH: MASK_DATA_1_LSW HIGH BANK [47:32] - // .. .. .. .. START: MASK_DATA_1_MSW HIGH BANK [53:48] - // .. .. .. .. FINISH: MASK_DATA_1_MSW HIGH BANK [53:48] - // .. .. .. FINISH: ENET1 RESET - // .. .. FINISH: ENET RESET - // .. .. START: I2C RESET - // .. .. .. START: I2C0 RESET - // .. .. .. .. START: DIR MODE GPIO BANK0 - // .. .. .. .. FINISH: DIR MODE GPIO BANK0 - // .. .. .. .. START: DIR MODE GPIO BANK1 - // .. .. .. .. FINISH: DIR MODE GPIO BANK1 - // .. .. .. .. START: MASK_DATA_0_LSW HIGH BANK [15:0] - // .. .. .. .. FINISH: MASK_DATA_0_LSW HIGH BANK [15:0] - // .. .. .. .. START: MASK_DATA_0_MSW HIGH BANK [31:16] - // .. .. .. .. FINISH: MASK_DATA_0_MSW HIGH BANK [31:16] - // .. .. .. .. START: MASK_DATA_1_LSW HIGH BANK [47:32] - // .. .. .. .. FINISH: MASK_DATA_1_LSW HIGH BANK [47:32] - // .. .. .. .. START: MASK_DATA_1_MSW HIGH BANK [53:48] - // .. .. .. .. FINISH: MASK_DATA_1_MSW HIGH BANK [53:48] - // .. .. .. .. START: OUTPUT ENABLE - // .. .. .. .. FINISH: OUTPUT ENABLE - // .. .. .. .. START: OUTPUT ENABLE - // .. .. .. .. FINISH: OUTPUT ENABLE - // .. .. .. .. START: MASK_DATA_0_LSW LOW BANK [15:0] - // .. .. .. .. FINISH: MASK_DATA_0_LSW LOW BANK [15:0] - // .. .. .. .. START: MASK_DATA_0_MSW LOW BANK [31:16] - // .. .. .. .. FINISH: MASK_DATA_0_MSW LOW BANK [31:16] - // .. .. .. .. START: MASK_DATA_1_LSW LOW BANK [47:32] - // .. .. .. .. FINISH: MASK_DATA_1_LSW LOW BANK [47:32] - // .. .. .. .. START: MASK_DATA_1_MSW LOW BANK [53:48] - // .. .. .. .. FINISH: MASK_DATA_1_MSW LOW BANK [53:48] - // .. .. .. .. START: ADD 1 MS DELAY - // .. .. .. .. - EMIT_MASKDELAY(0XF8F00200, 1), - // .. .. .. .. FINISH: ADD 1 MS DELAY - // .. .. .. .. START: MASK_DATA_0_LSW HIGH BANK [15:0] - // .. .. .. .. FINISH: MASK_DATA_0_LSW HIGH BANK [15:0] - // .. .. .. .. START: MASK_DATA_0_MSW HIGH BANK [31:16] - // .. .. .. .. FINISH: MASK_DATA_0_MSW HIGH BANK [31:16] - // .. .. .. .. START: MASK_DATA_1_LSW HIGH BANK [47:32] - // .. .. .. .. FINISH: MASK_DATA_1_LSW HIGH BANK [47:32] - // .. .. .. .. START: MASK_DATA_1_MSW HIGH BANK [53:48] - // .. .. .. .. FINISH: MASK_DATA_1_MSW HIGH BANK [53:48] - // .. .. .. FINISH: I2C0 RESET - // .. .. .. START: I2C1 RESET - // .. .. .. .. START: DIR MODE GPIO BANK0 - // .. .. .. .. FINISH: DIR MODE GPIO BANK0 - // .. .. .. .. START: DIR MODE GPIO BANK1 - // .. .. .. .. FINISH: DIR MODE GPIO BANK1 - // .. .. .. .. START: MASK_DATA_0_LSW HIGH BANK [15:0] - // .. .. .. .. FINISH: MASK_DATA_0_LSW HIGH BANK [15:0] - // .. .. .. .. START: MASK_DATA_0_MSW HIGH BANK [31:16] - // .. .. .. .. FINISH: MASK_DATA_0_MSW HIGH BANK [31:16] - // .. .. .. .. START: MASK_DATA_1_LSW HIGH BANK [47:32] - // .. .. .. .. FINISH: MASK_DATA_1_LSW HIGH BANK [47:32] - // .. .. .. .. START: MASK_DATA_1_MSW HIGH BANK [53:48] - // .. .. .. .. FINISH: MASK_DATA_1_MSW HIGH BANK [53:48] - // .. .. .. .. START: OUTPUT ENABLE - // .. .. .. .. FINISH: OUTPUT ENABLE - // .. .. .. .. START: OUTPUT ENABLE - // .. .. .. .. FINISH: OUTPUT ENABLE - // .. .. .. .. START: MASK_DATA_0_LSW LOW BANK [15:0] - // .. .. .. .. FINISH: MASK_DATA_0_LSW LOW BANK [15:0] - // .. .. .. .. START: MASK_DATA_0_MSW LOW BANK [31:16] - // .. .. .. .. FINISH: MASK_DATA_0_MSW LOW BANK [31:16] - // .. .. .. .. START: MASK_DATA_1_LSW LOW BANK [47:32] - // .. .. .. .. FINISH: MASK_DATA_1_LSW LOW BANK [47:32] - // .. .. .. .. START: MASK_DATA_1_MSW LOW BANK [53:48] - // .. .. .. .. FINISH: MASK_DATA_1_MSW LOW BANK [53:48] - // .. .. .. .. START: ADD 1 MS DELAY - // .. .. .. .. - EMIT_MASKDELAY(0XF8F00200, 1), - // .. .. .. .. FINISH: ADD 1 MS DELAY - // .. .. .. .. START: MASK_DATA_0_LSW HIGH BANK [15:0] - // .. .. .. .. FINISH: MASK_DATA_0_LSW HIGH BANK [15:0] - // .. .. .. .. START: MASK_DATA_0_MSW HIGH BANK [31:16] - // .. .. .. .. FINISH: MASK_DATA_0_MSW HIGH BANK [31:16] - // .. .. .. .. START: MASK_DATA_1_LSW HIGH BANK [47:32] - // .. .. .. .. FINISH: MASK_DATA_1_LSW HIGH BANK [47:32] - // .. .. .. .. START: MASK_DATA_1_MSW HIGH BANK [53:48] - // .. .. .. .. FINISH: MASK_DATA_1_MSW HIGH BANK [53:48] - // .. .. .. FINISH: I2C1 RESET - // .. .. FINISH: I2C RESET - // .. .. START: NOR CHIP SELECT - // .. .. .. START: DIR MODE BANK 0 - // .. .. .. FINISH: DIR MODE BANK 0 - // .. .. .. START: MASK_DATA_0_LSW HIGH BANK [15:0] - // .. .. .. FINISH: MASK_DATA_0_LSW HIGH BANK [15:0] - // .. .. .. START: OUTPUT ENABLE BANK 0 - // .. .. .. FINISH: OUTPUT ENABLE BANK 0 - // .. .. FINISH: NOR CHIP SELECT - // .. FINISH: SMC TIMING CALCULATION REGISTER UPDATE - // FINISH: top - // - EMIT_EXIT(), - - // -}; - -unsigned long ps7_post_config_3_0[] = { - // START: top - // .. START: SLCR SETTINGS - // .. UNLOCK_KEY = 0XDF0D - // .. ==> 0XF8000008[15:0] = 0x0000DF0DU - // .. ==> MASK : 0x0000FFFFU VAL : 0x0000DF0DU - // .. - EMIT_MASKWRITE(0XF8000008, 0x0000FFFFU ,0x0000DF0DU), - // .. FINISH: SLCR SETTINGS - // .. START: ENABLING LEVEL SHIFTER - // .. USER_LVL_INP_EN_0 = 1 - // .. ==> 0XF8000900[3:3] = 0x00000001U - // .. ==> MASK : 0x00000008U VAL : 0x00000008U - // .. USER_LVL_OUT_EN_0 = 1 - // .. ==> 0XF8000900[2:2] = 0x00000001U - // .. ==> MASK : 0x00000004U VAL : 0x00000004U - // .. USER_LVL_INP_EN_1 = 1 - // .. ==> 0XF8000900[1:1] = 0x00000001U - // .. ==> MASK : 0x00000002U VAL : 0x00000002U - // .. USER_LVL_OUT_EN_1 = 1 - // .. ==> 0XF8000900[0:0] = 0x00000001U - // .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. - EMIT_MASKWRITE(0XF8000900, 0x0000000FU ,0x0000000FU), - // .. FINISH: ENABLING LEVEL SHIFTER - // .. START: TPIU WIDTH IN CASE OF EMIO - // .. .. START: TRACE LOCK ACCESS REGISTER - // .. .. a = 0XC5ACCE55 - // .. .. ==> 0XF8803FB0[31:0] = 0xC5ACCE55U - // .. .. ==> MASK : 0xFFFFFFFFU VAL : 0xC5ACCE55U - // .. .. - EMIT_MASKWRITE(0XF8803FB0, 0xFFFFFFFFU ,0xC5ACCE55U), - // .. .. FINISH: TRACE LOCK ACCESS REGISTER - // .. .. START: TRACE CURRENT PORT SIZE - // .. .. a = 2 - // .. .. ==> 0XF8803004[31:0] = 0x00000002U - // .. .. ==> MASK : 0xFFFFFFFFU VAL : 0x00000002U - // .. .. - EMIT_MASKWRITE(0XF8803004, 0xFFFFFFFFU ,0x00000002U), - // .. .. FINISH: TRACE CURRENT PORT SIZE - // .. .. START: TRACE LOCK ACCESS REGISTER - // .. .. a = 0X0 - // .. .. ==> 0XF8803FB0[31:0] = 0x00000000U - // .. .. ==> MASK : 0xFFFFFFFFU VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8803FB0, 0xFFFFFFFFU ,0x00000000U), - // .. .. FINISH: TRACE LOCK ACCESS REGISTER - // .. FINISH: TPIU WIDTH IN CASE OF EMIO - // .. START: FPGA RESETS TO 0 - // .. reserved_3 = 0 - // .. ==> 0XF8000240[31:25] = 0x00000000U - // .. ==> MASK : 0xFE000000U VAL : 0x00000000U - // .. reserved_FPGA_ACP_RST = 0 - // .. ==> 0XF8000240[24:24] = 0x00000000U - // .. ==> MASK : 0x01000000U VAL : 0x00000000U - // .. reserved_FPGA_AXDS3_RST = 0 - // .. ==> 0XF8000240[23:23] = 0x00000000U - // .. ==> MASK : 0x00800000U VAL : 0x00000000U - // .. reserved_FPGA_AXDS2_RST = 0 - // .. ==> 0XF8000240[22:22] = 0x00000000U - // .. ==> MASK : 0x00400000U VAL : 0x00000000U - // .. reserved_FPGA_AXDS1_RST = 0 - // .. ==> 0XF8000240[21:21] = 0x00000000U - // .. ==> MASK : 0x00200000U VAL : 0x00000000U - // .. reserved_FPGA_AXDS0_RST = 0 - // .. ==> 0XF8000240[20:20] = 0x00000000U - // .. ==> MASK : 0x00100000U VAL : 0x00000000U - // .. reserved_2 = 0 - // .. ==> 0XF8000240[19:18] = 0x00000000U - // .. ==> MASK : 0x000C0000U VAL : 0x00000000U - // .. reserved_FSSW1_FPGA_RST = 0 - // .. ==> 0XF8000240[17:17] = 0x00000000U - // .. ==> MASK : 0x00020000U VAL : 0x00000000U - // .. reserved_FSSW0_FPGA_RST = 0 - // .. ==> 0XF8000240[16:16] = 0x00000000U - // .. ==> MASK : 0x00010000U VAL : 0x00000000U - // .. reserved_1 = 0 - // .. ==> 0XF8000240[15:14] = 0x00000000U - // .. ==> MASK : 0x0000C000U VAL : 0x00000000U - // .. reserved_FPGA_FMSW1_RST = 0 - // .. ==> 0XF8000240[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. reserved_FPGA_FMSW0_RST = 0 - // .. ==> 0XF8000240[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. reserved_FPGA_DMA3_RST = 0 - // .. ==> 0XF8000240[11:11] = 0x00000000U - // .. ==> MASK : 0x00000800U VAL : 0x00000000U - // .. reserved_FPGA_DMA2_RST = 0 - // .. ==> 0XF8000240[10:10] = 0x00000000U - // .. ==> MASK : 0x00000400U VAL : 0x00000000U - // .. reserved_FPGA_DMA1_RST = 0 - // .. ==> 0XF8000240[9:9] = 0x00000000U - // .. ==> MASK : 0x00000200U VAL : 0x00000000U - // .. reserved_FPGA_DMA0_RST = 0 - // .. ==> 0XF8000240[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. reserved = 0 - // .. ==> 0XF8000240[7:4] = 0x00000000U - // .. ==> MASK : 0x000000F0U VAL : 0x00000000U - // .. FPGA3_OUT_RST = 0 - // .. ==> 0XF8000240[3:3] = 0x00000000U - // .. ==> MASK : 0x00000008U VAL : 0x00000000U - // .. FPGA2_OUT_RST = 0 - // .. ==> 0XF8000240[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. FPGA1_OUT_RST = 0 - // .. ==> 0XF8000240[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. FPGA0_OUT_RST = 0 - // .. ==> 0XF8000240[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000240, 0xFFFFFFFFU ,0x00000000U), - // .. FINISH: FPGA RESETS TO 0 - // .. START: AFI REGISTERS - // .. .. START: AFI0 REGISTERS - // .. .. FINISH: AFI0 REGISTERS - // .. .. START: AFI1 REGISTERS - // .. .. FINISH: AFI1 REGISTERS - // .. .. START: AFI2 REGISTERS - // .. .. FINISH: AFI2 REGISTERS - // .. .. START: AFI3 REGISTERS - // .. .. FINISH: AFI3 REGISTERS - // .. FINISH: AFI REGISTERS - // .. START: LOCK IT BACK - // .. LOCK_KEY = 0X767B - // .. ==> 0XF8000004[15:0] = 0x0000767BU - // .. ==> MASK : 0x0000FFFFU VAL : 0x0000767BU - // .. - EMIT_MASKWRITE(0XF8000004, 0x0000FFFFU ,0x0000767BU), - // .. FINISH: LOCK IT BACK - // FINISH: top - // - EMIT_EXIT(), - - // -}; - -unsigned long ps7_debug_3_0[] = { - // START: top - // .. START: CROSS TRIGGER CONFIGURATIONS - // .. .. START: UNLOCKING CTI REGISTERS - // .. .. KEY = 0XC5ACCE55 - // .. .. ==> 0XF8898FB0[31:0] = 0xC5ACCE55U - // .. .. ==> MASK : 0xFFFFFFFFU VAL : 0xC5ACCE55U - // .. .. - EMIT_MASKWRITE(0XF8898FB0, 0xFFFFFFFFU ,0xC5ACCE55U), - // .. .. KEY = 0XC5ACCE55 - // .. .. ==> 0XF8899FB0[31:0] = 0xC5ACCE55U - // .. .. ==> MASK : 0xFFFFFFFFU VAL : 0xC5ACCE55U - // .. .. - EMIT_MASKWRITE(0XF8899FB0, 0xFFFFFFFFU ,0xC5ACCE55U), - // .. .. KEY = 0XC5ACCE55 - // .. .. ==> 0XF8809FB0[31:0] = 0xC5ACCE55U - // .. .. ==> MASK : 0xFFFFFFFFU VAL : 0xC5ACCE55U - // .. .. - EMIT_MASKWRITE(0XF8809FB0, 0xFFFFFFFFU ,0xC5ACCE55U), - // .. .. FINISH: UNLOCKING CTI REGISTERS - // .. .. START: ENABLING CTI MODULES AND CHANNELS - // .. .. FINISH: ENABLING CTI MODULES AND CHANNELS - // .. .. START: MAPPING CPU0, CPU1 AND FTM EVENTS TO CTM CHANNELS - // .. .. FINISH: MAPPING CPU0, CPU1 AND FTM EVENTS TO CTM CHANNELS - // .. FINISH: CROSS TRIGGER CONFIGURATIONS - // FINISH: top - // - EMIT_EXIT(), - - // -}; - -unsigned long ps7_pll_init_data_2_0[] = { - // START: top - // .. START: SLCR SETTINGS - // .. UNLOCK_KEY = 0XDF0D - // .. ==> 0XF8000008[15:0] = 0x0000DF0DU - // .. ==> MASK : 0x0000FFFFU VAL : 0x0000DF0DU - // .. - EMIT_MASKWRITE(0XF8000008, 0x0000FFFFU ,0x0000DF0DU), - // .. FINISH: SLCR SETTINGS - // .. START: PLL SLCR REGISTERS - // .. .. START: ARM PLL INIT - // .. .. PLL_RES = 0x4 - // .. .. ==> 0XF8000110[7:4] = 0x00000004U - // .. .. ==> MASK : 0x000000F0U VAL : 0x00000040U - // .. .. PLL_CP = 0x2 - // .. .. ==> 0XF8000110[11:8] = 0x00000002U - // .. .. ==> MASK : 0x00000F00U VAL : 0x00000200U - // .. .. LOCK_CNT = 0xfa - // .. .. ==> 0XF8000110[21:12] = 0x000000FAU - // .. .. ==> MASK : 0x003FF000U VAL : 0x000FA000U - // .. .. - EMIT_MASKWRITE(0XF8000110, 0x003FFFF0U ,0x000FA240U), - // .. .. .. START: UPDATE FB_DIV - // .. .. .. PLL_FDIV = 0x3c - // .. .. .. ==> 0XF8000100[18:12] = 0x0000003CU - // .. .. .. ==> MASK : 0x0007F000U VAL : 0x0003C000U - // .. .. .. - EMIT_MASKWRITE(0XF8000100, 0x0007F000U ,0x0003C000U), - // .. .. .. FINISH: UPDATE FB_DIV - // .. .. .. START: BY PASS PLL - // .. .. .. PLL_BYPASS_FORCE = 1 - // .. .. .. ==> 0XF8000100[4:4] = 0x00000001U - // .. .. .. ==> MASK : 0x00000010U VAL : 0x00000010U - // .. .. .. - EMIT_MASKWRITE(0XF8000100, 0x00000010U ,0x00000010U), - // .. .. .. FINISH: BY PASS PLL - // .. .. .. START: ASSERT RESET - // .. .. .. PLL_RESET = 1 - // .. .. .. ==> 0XF8000100[0:0] = 0x00000001U - // .. .. .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. .. .. - EMIT_MASKWRITE(0XF8000100, 0x00000001U ,0x00000001U), - // .. .. .. FINISH: ASSERT RESET - // .. .. .. START: DEASSERT RESET - // .. .. .. PLL_RESET = 0 - // .. .. .. ==> 0XF8000100[0:0] = 0x00000000U - // .. .. .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. .. .. - EMIT_MASKWRITE(0XF8000100, 0x00000001U ,0x00000000U), - // .. .. .. FINISH: DEASSERT RESET - // .. .. .. START: CHECK PLL STATUS - // .. .. .. ARM_PLL_LOCK = 1 - // .. .. .. ==> 0XF800010C[0:0] = 0x00000001U - // .. .. .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. .. .. - EMIT_MASKPOLL(0XF800010C, 0x00000001U), - // .. .. .. FINISH: CHECK PLL STATUS - // .. .. .. START: REMOVE PLL BY PASS - // .. .. .. PLL_BYPASS_FORCE = 0 - // .. .. .. ==> 0XF8000100[4:4] = 0x00000000U - // .. .. .. ==> MASK : 0x00000010U VAL : 0x00000000U - // .. .. .. - EMIT_MASKWRITE(0XF8000100, 0x00000010U ,0x00000000U), - // .. .. .. FINISH: REMOVE PLL BY PASS - // .. .. .. SRCSEL = 0x0 - // .. .. .. ==> 0XF8000120[5:4] = 0x00000000U - // .. .. .. ==> MASK : 0x00000030U VAL : 0x00000000U - // .. .. .. DIVISOR = 0x3 - // .. .. .. ==> 0XF8000120[13:8] = 0x00000003U - // .. .. .. ==> MASK : 0x00003F00U VAL : 0x00000300U - // .. .. .. CPU_6OR4XCLKACT = 0x1 - // .. .. .. ==> 0XF8000120[24:24] = 0x00000001U - // .. .. .. ==> MASK : 0x01000000U VAL : 0x01000000U - // .. .. .. CPU_3OR2XCLKACT = 0x1 - // .. .. .. ==> 0XF8000120[25:25] = 0x00000001U - // .. .. .. ==> MASK : 0x02000000U VAL : 0x02000000U - // .. .. .. CPU_2XCLKACT = 0x1 - // .. .. .. ==> 0XF8000120[26:26] = 0x00000001U - // .. .. .. ==> MASK : 0x04000000U VAL : 0x04000000U - // .. .. .. CPU_1XCLKACT = 0x1 - // .. .. .. ==> 0XF8000120[27:27] = 0x00000001U - // .. .. .. ==> MASK : 0x08000000U VAL : 0x08000000U - // .. .. .. CPU_PERI_CLKACT = 0x1 - // .. .. .. ==> 0XF8000120[28:28] = 0x00000001U - // .. .. .. ==> MASK : 0x10000000U VAL : 0x10000000U - // .. .. .. - EMIT_MASKWRITE(0XF8000120, 0x1F003F30U ,0x1F000300U), - // .. .. FINISH: ARM PLL INIT - // .. .. START: DDR PLL INIT - // .. .. PLL_RES = 0x2 - // .. .. ==> 0XF8000114[7:4] = 0x00000002U - // .. .. ==> MASK : 0x000000F0U VAL : 0x00000020U - // .. .. PLL_CP = 0x2 - // .. .. ==> 0XF8000114[11:8] = 0x00000002U - // .. .. ==> MASK : 0x00000F00U VAL : 0x00000200U - // .. .. LOCK_CNT = 0x12c - // .. .. ==> 0XF8000114[21:12] = 0x0000012CU - // .. .. ==> MASK : 0x003FF000U VAL : 0x0012C000U - // .. .. - EMIT_MASKWRITE(0XF8000114, 0x003FFFF0U ,0x0012C220U), - // .. .. .. START: UPDATE FB_DIV - // .. .. .. PLL_FDIV = 0x20 - // .. .. .. ==> 0XF8000104[18:12] = 0x00000020U - // .. .. .. ==> MASK : 0x0007F000U VAL : 0x00020000U - // .. .. .. - EMIT_MASKWRITE(0XF8000104, 0x0007F000U ,0x00020000U), - // .. .. .. FINISH: UPDATE FB_DIV - // .. .. .. START: BY PASS PLL - // .. .. .. PLL_BYPASS_FORCE = 1 - // .. .. .. ==> 0XF8000104[4:4] = 0x00000001U - // .. .. .. ==> MASK : 0x00000010U VAL : 0x00000010U - // .. .. .. - EMIT_MASKWRITE(0XF8000104, 0x00000010U ,0x00000010U), - // .. .. .. FINISH: BY PASS PLL - // .. .. .. START: ASSERT RESET - // .. .. .. PLL_RESET = 1 - // .. .. .. ==> 0XF8000104[0:0] = 0x00000001U - // .. .. .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. .. .. - EMIT_MASKWRITE(0XF8000104, 0x00000001U ,0x00000001U), - // .. .. .. FINISH: ASSERT RESET - // .. .. .. START: DEASSERT RESET - // .. .. .. PLL_RESET = 0 - // .. .. .. ==> 0XF8000104[0:0] = 0x00000000U - // .. .. .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. .. .. - EMIT_MASKWRITE(0XF8000104, 0x00000001U ,0x00000000U), - // .. .. .. FINISH: DEASSERT RESET - // .. .. .. START: CHECK PLL STATUS - // .. .. .. DDR_PLL_LOCK = 1 - // .. .. .. ==> 0XF800010C[1:1] = 0x00000001U - // .. .. .. ==> MASK : 0x00000002U VAL : 0x00000002U - // .. .. .. - EMIT_MASKPOLL(0XF800010C, 0x00000002U), - // .. .. .. FINISH: CHECK PLL STATUS - // .. .. .. START: REMOVE PLL BY PASS - // .. .. .. PLL_BYPASS_FORCE = 0 - // .. .. .. ==> 0XF8000104[4:4] = 0x00000000U - // .. .. .. ==> MASK : 0x00000010U VAL : 0x00000000U - // .. .. .. - EMIT_MASKWRITE(0XF8000104, 0x00000010U ,0x00000000U), - // .. .. .. FINISH: REMOVE PLL BY PASS - // .. .. .. DDR_3XCLKACT = 0x1 - // .. .. .. ==> 0XF8000124[0:0] = 0x00000001U - // .. .. .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. .. .. DDR_2XCLKACT = 0x1 - // .. .. .. ==> 0XF8000124[1:1] = 0x00000001U - // .. .. .. ==> MASK : 0x00000002U VAL : 0x00000002U - // .. .. .. DDR_3XCLK_DIVISOR = 0x2 - // .. .. .. ==> 0XF8000124[25:20] = 0x00000002U - // .. .. .. ==> MASK : 0x03F00000U VAL : 0x00200000U - // .. .. .. DDR_2XCLK_DIVISOR = 0x3 - // .. .. .. ==> 0XF8000124[31:26] = 0x00000003U - // .. .. .. ==> MASK : 0xFC000000U VAL : 0x0C000000U - // .. .. .. - EMIT_MASKWRITE(0XF8000124, 0xFFF00003U ,0x0C200003U), - // .. .. FINISH: DDR PLL INIT - // .. .. START: IO PLL INIT - // .. .. PLL_RES = 0x4 - // .. .. ==> 0XF8000118[7:4] = 0x00000004U - // .. .. ==> MASK : 0x000000F0U VAL : 0x00000040U - // .. .. PLL_CP = 0x2 - // .. .. ==> 0XF8000118[11:8] = 0x00000002U - // .. .. ==> MASK : 0x00000F00U VAL : 0x00000200U - // .. .. LOCK_CNT = 0xfa - // .. .. ==> 0XF8000118[21:12] = 0x000000FAU - // .. .. ==> MASK : 0x003FF000U VAL : 0x000FA000U - // .. .. - EMIT_MASKWRITE(0XF8000118, 0x003FFFF0U ,0x000FA240U), - // .. .. .. START: UPDATE FB_DIV - // .. .. .. PLL_FDIV = 0x3c - // .. .. .. ==> 0XF8000108[18:12] = 0x0000003CU - // .. .. .. ==> MASK : 0x0007F000U VAL : 0x0003C000U - // .. .. .. - EMIT_MASKWRITE(0XF8000108, 0x0007F000U ,0x0003C000U), - // .. .. .. FINISH: UPDATE FB_DIV - // .. .. .. START: BY PASS PLL - // .. .. .. PLL_BYPASS_FORCE = 1 - // .. .. .. ==> 0XF8000108[4:4] = 0x00000001U - // .. .. .. ==> MASK : 0x00000010U VAL : 0x00000010U - // .. .. .. - EMIT_MASKWRITE(0XF8000108, 0x00000010U ,0x00000010U), - // .. .. .. FINISH: BY PASS PLL - // .. .. .. START: ASSERT RESET - // .. .. .. PLL_RESET = 1 - // .. .. .. ==> 0XF8000108[0:0] = 0x00000001U - // .. .. .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. .. .. - EMIT_MASKWRITE(0XF8000108, 0x00000001U ,0x00000001U), - // .. .. .. FINISH: ASSERT RESET - // .. .. .. START: DEASSERT RESET - // .. .. .. PLL_RESET = 0 - // .. .. .. ==> 0XF8000108[0:0] = 0x00000000U - // .. .. .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. .. .. - EMIT_MASKWRITE(0XF8000108, 0x00000001U ,0x00000000U), - // .. .. .. FINISH: DEASSERT RESET - // .. .. .. START: CHECK PLL STATUS - // .. .. .. IO_PLL_LOCK = 1 - // .. .. .. ==> 0XF800010C[2:2] = 0x00000001U - // .. .. .. ==> MASK : 0x00000004U VAL : 0x00000004U - // .. .. .. - EMIT_MASKPOLL(0XF800010C, 0x00000004U), - // .. .. .. FINISH: CHECK PLL STATUS - // .. .. .. START: REMOVE PLL BY PASS - // .. .. .. PLL_BYPASS_FORCE = 0 - // .. .. .. ==> 0XF8000108[4:4] = 0x00000000U - // .. .. .. ==> MASK : 0x00000010U VAL : 0x00000000U - // .. .. .. - EMIT_MASKWRITE(0XF8000108, 0x00000010U ,0x00000000U), - // .. .. .. FINISH: REMOVE PLL BY PASS - // .. .. FINISH: IO PLL INIT - // .. FINISH: PLL SLCR REGISTERS - // .. START: LOCK IT BACK - // .. LOCK_KEY = 0X767B - // .. ==> 0XF8000004[15:0] = 0x0000767BU - // .. ==> MASK : 0x0000FFFFU VAL : 0x0000767BU - // .. - EMIT_MASKWRITE(0XF8000004, 0x0000FFFFU ,0x0000767BU), - // .. FINISH: LOCK IT BACK - // FINISH: top - // - EMIT_EXIT(), - - // -}; - -unsigned long ps7_clock_init_data_2_0[] = { - // START: top - // .. START: SLCR SETTINGS - // .. UNLOCK_KEY = 0XDF0D - // .. ==> 0XF8000008[15:0] = 0x0000DF0DU - // .. ==> MASK : 0x0000FFFFU VAL : 0x0000DF0DU - // .. - EMIT_MASKWRITE(0XF8000008, 0x0000FFFFU ,0x0000DF0DU), - // .. FINISH: SLCR SETTINGS - // .. START: CLOCK CONTROL SLCR REGISTERS - // .. CLKACT = 0x1 - // .. ==> 0XF8000128[0:0] = 0x00000001U - // .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. DIVISOR0 = 0x23 - // .. ==> 0XF8000128[13:8] = 0x00000023U - // .. ==> MASK : 0x00003F00U VAL : 0x00002300U - // .. DIVISOR1 = 0x3 - // .. ==> 0XF8000128[25:20] = 0x00000003U - // .. ==> MASK : 0x03F00000U VAL : 0x00300000U - // .. - EMIT_MASKWRITE(0XF8000128, 0x03F03F01U ,0x00302301U), - // .. CLKACT = 0x1 - // .. ==> 0XF8000138[0:0] = 0x00000001U - // .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. SRCSEL = 0x0 - // .. ==> 0XF8000138[4:4] = 0x00000000U - // .. ==> MASK : 0x00000010U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000138, 0x00000011U ,0x00000001U), - // .. CLKACT = 0x1 - // .. ==> 0XF8000140[0:0] = 0x00000001U - // .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. SRCSEL = 0x0 - // .. ==> 0XF8000140[6:4] = 0x00000000U - // .. ==> MASK : 0x00000070U VAL : 0x00000000U - // .. DIVISOR = 0x10 - // .. ==> 0XF8000140[13:8] = 0x00000010U - // .. ==> MASK : 0x00003F00U VAL : 0x00001000U - // .. DIVISOR1 = 0x1 - // .. ==> 0XF8000140[25:20] = 0x00000001U - // .. ==> MASK : 0x03F00000U VAL : 0x00100000U - // .. - EMIT_MASKWRITE(0XF8000140, 0x03F03F71U ,0x00101001U), - // .. CLKACT = 0x1 - // .. ==> 0XF800014C[0:0] = 0x00000001U - // .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. SRCSEL = 0x0 - // .. ==> 0XF800014C[5:4] = 0x00000000U - // .. ==> MASK : 0x00000030U VAL : 0x00000000U - // .. DIVISOR = 0xa - // .. ==> 0XF800014C[13:8] = 0x0000000AU - // .. ==> MASK : 0x00003F00U VAL : 0x00000A00U - // .. - EMIT_MASKWRITE(0XF800014C, 0x00003F31U ,0x00000A01U), - // .. CLKACT0 = 0x0 - // .. ==> 0XF8000150[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. CLKACT1 = 0x1 - // .. ==> 0XF8000150[1:1] = 0x00000001U - // .. ==> MASK : 0x00000002U VAL : 0x00000002U - // .. SRCSEL = 0x0 - // .. ==> 0XF8000150[5:4] = 0x00000000U - // .. ==> MASK : 0x00000030U VAL : 0x00000000U - // .. DIVISOR = 0x28 - // .. ==> 0XF8000150[13:8] = 0x00000028U - // .. ==> MASK : 0x00003F00U VAL : 0x00002800U - // .. - EMIT_MASKWRITE(0XF8000150, 0x00003F33U ,0x00002802U), - // .. CLKACT0 = 0x0 - // .. ==> 0XF8000154[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. CLKACT1 = 0x1 - // .. ==> 0XF8000154[1:1] = 0x00000001U - // .. ==> MASK : 0x00000002U VAL : 0x00000002U - // .. SRCSEL = 0x0 - // .. ==> 0XF8000154[5:4] = 0x00000000U - // .. ==> MASK : 0x00000030U VAL : 0x00000000U - // .. DIVISOR = 0x28 - // .. ==> 0XF8000154[13:8] = 0x00000028U - // .. ==> MASK : 0x00003F00U VAL : 0x00002800U - // .. - EMIT_MASKWRITE(0XF8000154, 0x00003F33U ,0x00002802U), - // .. .. START: TRACE CLOCK - // .. .. FINISH: TRACE CLOCK - // .. .. CLKACT = 0x1 - // .. .. ==> 0XF8000168[0:0] = 0x00000001U - // .. .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. .. SRCSEL = 0x0 - // .. .. ==> 0XF8000168[5:4] = 0x00000000U - // .. .. ==> MASK : 0x00000030U VAL : 0x00000000U - // .. .. DIVISOR = 0xa - // .. .. ==> 0XF8000168[13:8] = 0x0000000AU - // .. .. ==> MASK : 0x00003F00U VAL : 0x00000A00U - // .. .. - EMIT_MASKWRITE(0XF8000168, 0x00003F31U ,0x00000A01U), - // .. .. SRCSEL = 0x0 - // .. .. ==> 0XF8000170[5:4] = 0x00000000U - // .. .. ==> MASK : 0x00000030U VAL : 0x00000000U - // .. .. DIVISOR0 = 0x14 - // .. .. ==> 0XF8000170[13:8] = 0x00000014U - // .. .. ==> MASK : 0x00003F00U VAL : 0x00001400U - // .. .. DIVISOR1 = 0x1 - // .. .. ==> 0XF8000170[25:20] = 0x00000001U - // .. .. ==> MASK : 0x03F00000U VAL : 0x00100000U - // .. .. - EMIT_MASKWRITE(0XF8000170, 0x03F03F30U ,0x00101400U), - // .. .. SRCSEL = 0x0 - // .. .. ==> 0XF8000180[5:4] = 0x00000000U - // .. .. ==> MASK : 0x00000030U VAL : 0x00000000U - // .. .. DIVISOR0 = 0x14 - // .. .. ==> 0XF8000180[13:8] = 0x00000014U - // .. .. ==> MASK : 0x00003F00U VAL : 0x00001400U - // .. .. DIVISOR1 = 0x1 - // .. .. ==> 0XF8000180[25:20] = 0x00000001U - // .. .. ==> MASK : 0x03F00000U VAL : 0x00100000U - // .. .. - EMIT_MASKWRITE(0XF8000180, 0x03F03F30U ,0x00101400U), - // .. .. SRCSEL = 0x0 - // .. .. ==> 0XF8000190[5:4] = 0x00000000U - // .. .. ==> MASK : 0x00000030U VAL : 0x00000000U - // .. .. DIVISOR0 = 0x3c - // .. .. ==> 0XF8000190[13:8] = 0x0000003CU - // .. .. ==> MASK : 0x00003F00U VAL : 0x00003C00U - // .. .. DIVISOR1 = 0x1 - // .. .. ==> 0XF8000190[25:20] = 0x00000001U - // .. .. ==> MASK : 0x03F00000U VAL : 0x00100000U - // .. .. - EMIT_MASKWRITE(0XF8000190, 0x03F03F30U ,0x00103C00U), - // .. .. SRCSEL = 0x0 - // .. .. ==> 0XF80001A0[5:4] = 0x00000000U - // .. .. ==> MASK : 0x00000030U VAL : 0x00000000U - // .. .. DIVISOR0 = 0x28 - // .. .. ==> 0XF80001A0[13:8] = 0x00000028U - // .. .. ==> MASK : 0x00003F00U VAL : 0x00002800U - // .. .. DIVISOR1 = 0x1 - // .. .. ==> 0XF80001A0[25:20] = 0x00000001U - // .. .. ==> MASK : 0x03F00000U VAL : 0x00100000U - // .. .. - EMIT_MASKWRITE(0XF80001A0, 0x03F03F30U ,0x00102800U), - // .. .. CLK_621_TRUE = 0x1 - // .. .. ==> 0XF80001C4[0:0] = 0x00000001U - // .. .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. .. - EMIT_MASKWRITE(0XF80001C4, 0x00000001U ,0x00000001U), - // .. .. DMA_CPU_2XCLKACT = 0x1 - // .. .. ==> 0XF800012C[0:0] = 0x00000001U - // .. .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. .. USB0_CPU_1XCLKACT = 0x1 - // .. .. ==> 0XF800012C[2:2] = 0x00000001U - // .. .. ==> MASK : 0x00000004U VAL : 0x00000004U - // .. .. USB1_CPU_1XCLKACT = 0x1 - // .. .. ==> 0XF800012C[3:3] = 0x00000001U - // .. .. ==> MASK : 0x00000008U VAL : 0x00000008U - // .. .. GEM0_CPU_1XCLKACT = 0x1 - // .. .. ==> 0XF800012C[6:6] = 0x00000001U - // .. .. ==> MASK : 0x00000040U VAL : 0x00000040U - // .. .. GEM1_CPU_1XCLKACT = 0x0 - // .. .. ==> 0XF800012C[7:7] = 0x00000000U - // .. .. ==> MASK : 0x00000080U VAL : 0x00000000U - // .. .. SDI0_CPU_1XCLKACT = 0x0 - // .. .. ==> 0XF800012C[10:10] = 0x00000000U - // .. .. ==> MASK : 0x00000400U VAL : 0x00000000U - // .. .. SDI1_CPU_1XCLKACT = 0x1 - // .. .. ==> 0XF800012C[11:11] = 0x00000001U - // .. .. ==> MASK : 0x00000800U VAL : 0x00000800U - // .. .. SPI0_CPU_1XCLKACT = 0x0 - // .. .. ==> 0XF800012C[14:14] = 0x00000000U - // .. .. ==> MASK : 0x00004000U VAL : 0x00000000U - // .. .. SPI1_CPU_1XCLKACT = 0x0 - // .. .. ==> 0XF800012C[15:15] = 0x00000000U - // .. .. ==> MASK : 0x00008000U VAL : 0x00000000U - // .. .. CAN0_CPU_1XCLKACT = 0x0 - // .. .. ==> 0XF800012C[16:16] = 0x00000000U - // .. .. ==> MASK : 0x00010000U VAL : 0x00000000U - // .. .. CAN1_CPU_1XCLKACT = 0x0 - // .. .. ==> 0XF800012C[17:17] = 0x00000000U - // .. .. ==> MASK : 0x00020000U VAL : 0x00000000U - // .. .. I2C0_CPU_1XCLKACT = 0x1 - // .. .. ==> 0XF800012C[18:18] = 0x00000001U - // .. .. ==> MASK : 0x00040000U VAL : 0x00040000U - // .. .. I2C1_CPU_1XCLKACT = 0x1 - // .. .. ==> 0XF800012C[19:19] = 0x00000001U - // .. .. ==> MASK : 0x00080000U VAL : 0x00080000U - // .. .. UART0_CPU_1XCLKACT = 0x0 - // .. .. ==> 0XF800012C[20:20] = 0x00000000U - // .. .. ==> MASK : 0x00100000U VAL : 0x00000000U - // .. .. UART1_CPU_1XCLKACT = 0x1 - // .. .. ==> 0XF800012C[21:21] = 0x00000001U - // .. .. ==> MASK : 0x00200000U VAL : 0x00200000U - // .. .. GPIO_CPU_1XCLKACT = 0x1 - // .. .. ==> 0XF800012C[22:22] = 0x00000001U - // .. .. ==> MASK : 0x00400000U VAL : 0x00400000U - // .. .. LQSPI_CPU_1XCLKACT = 0x1 - // .. .. ==> 0XF800012C[23:23] = 0x00000001U - // .. .. ==> MASK : 0x00800000U VAL : 0x00800000U - // .. .. SMC_CPU_1XCLKACT = 0x1 - // .. .. ==> 0XF800012C[24:24] = 0x00000001U - // .. .. ==> MASK : 0x01000000U VAL : 0x01000000U - // .. .. - EMIT_MASKWRITE(0XF800012C, 0x01FFCCCDU ,0x01EC084DU), - // .. FINISH: CLOCK CONTROL SLCR REGISTERS - // .. START: THIS SHOULD BE BLANK - // .. FINISH: THIS SHOULD BE BLANK - // .. START: LOCK IT BACK - // .. LOCK_KEY = 0X767B - // .. ==> 0XF8000004[15:0] = 0x0000767BU - // .. ==> MASK : 0x0000FFFFU VAL : 0x0000767BU - // .. - EMIT_MASKWRITE(0XF8000004, 0x0000FFFFU ,0x0000767BU), - // .. FINISH: LOCK IT BACK - // FINISH: top - // - EMIT_EXIT(), - - // -}; - -unsigned long ps7_ddr_init_data_2_0[] = { - // START: top - // .. START: DDR INITIALIZATION - // .. .. START: LOCK DDR - // .. .. reg_ddrc_soft_rstb = 0 - // .. .. ==> 0XF8006000[0:0] = 0x00000000U - // .. .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. .. reg_ddrc_powerdown_en = 0x0 - // .. .. ==> 0XF8006000[1:1] = 0x00000000U - // .. .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. .. reg_ddrc_data_bus_width = 0x0 - // .. .. ==> 0XF8006000[3:2] = 0x00000000U - // .. .. ==> MASK : 0x0000000CU VAL : 0x00000000U - // .. .. reg_ddrc_burst8_refresh = 0x0 - // .. .. ==> 0XF8006000[6:4] = 0x00000000U - // .. .. ==> MASK : 0x00000070U VAL : 0x00000000U - // .. .. reg_ddrc_rdwr_idle_gap = 0x1 - // .. .. ==> 0XF8006000[13:7] = 0x00000001U - // .. .. ==> MASK : 0x00003F80U VAL : 0x00000080U - // .. .. reg_ddrc_dis_rd_bypass = 0x0 - // .. .. ==> 0XF8006000[14:14] = 0x00000000U - // .. .. ==> MASK : 0x00004000U VAL : 0x00000000U - // .. .. reg_ddrc_dis_act_bypass = 0x0 - // .. .. ==> 0XF8006000[15:15] = 0x00000000U - // .. .. ==> MASK : 0x00008000U VAL : 0x00000000U - // .. .. reg_ddrc_dis_auto_refresh = 0x0 - // .. .. ==> 0XF8006000[16:16] = 0x00000000U - // .. .. ==> MASK : 0x00010000U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006000, 0x0001FFFFU ,0x00000080U), - // .. .. FINISH: LOCK DDR - // .. .. reg_ddrc_t_rfc_nom_x32 = 0x81 - // .. .. ==> 0XF8006004[11:0] = 0x00000081U - // .. .. ==> MASK : 0x00000FFFU VAL : 0x00000081U - // .. .. reg_ddrc_active_ranks = 0x1 - // .. .. ==> 0XF8006004[13:12] = 0x00000001U - // .. .. ==> MASK : 0x00003000U VAL : 0x00001000U - // .. .. reg_ddrc_addrmap_cs_bit0 = 0x0 - // .. .. ==> 0XF8006004[18:14] = 0x00000000U - // .. .. ==> MASK : 0x0007C000U VAL : 0x00000000U - // .. .. reg_ddrc_wr_odt_block = 0x1 - // .. .. ==> 0XF8006004[20:19] = 0x00000001U - // .. .. ==> MASK : 0x00180000U VAL : 0x00080000U - // .. .. reg_ddrc_diff_rank_rd_2cycle_gap = 0x0 - // .. .. ==> 0XF8006004[21:21] = 0x00000000U - // .. .. ==> MASK : 0x00200000U VAL : 0x00000000U - // .. .. reg_ddrc_addrmap_cs_bit1 = 0x0 - // .. .. ==> 0XF8006004[26:22] = 0x00000000U - // .. .. ==> MASK : 0x07C00000U VAL : 0x00000000U - // .. .. reg_ddrc_addrmap_open_bank = 0x0 - // .. .. ==> 0XF8006004[27:27] = 0x00000000U - // .. .. ==> MASK : 0x08000000U VAL : 0x00000000U - // .. .. reg_ddrc_addrmap_4bank_ram = 0x0 - // .. .. ==> 0XF8006004[28:28] = 0x00000000U - // .. .. ==> MASK : 0x10000000U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006004, 0x1FFFFFFFU ,0x00081081U), - // .. .. reg_ddrc_hpr_min_non_critical_x32 = 0xf - // .. .. ==> 0XF8006008[10:0] = 0x0000000FU - // .. .. ==> MASK : 0x000007FFU VAL : 0x0000000FU - // .. .. reg_ddrc_hpr_max_starve_x32 = 0xf - // .. .. ==> 0XF8006008[21:11] = 0x0000000FU - // .. .. ==> MASK : 0x003FF800U VAL : 0x00007800U - // .. .. reg_ddrc_hpr_xact_run_length = 0xf - // .. .. ==> 0XF8006008[25:22] = 0x0000000FU - // .. .. ==> MASK : 0x03C00000U VAL : 0x03C00000U - // .. .. - EMIT_MASKWRITE(0XF8006008, 0x03FFFFFFU ,0x03C0780FU), - // .. .. reg_ddrc_lpr_min_non_critical_x32 = 0x1 - // .. .. ==> 0XF800600C[10:0] = 0x00000001U - // .. .. ==> MASK : 0x000007FFU VAL : 0x00000001U - // .. .. reg_ddrc_lpr_max_starve_x32 = 0x2 - // .. .. ==> 0XF800600C[21:11] = 0x00000002U - // .. .. ==> MASK : 0x003FF800U VAL : 0x00001000U - // .. .. reg_ddrc_lpr_xact_run_length = 0x8 - // .. .. ==> 0XF800600C[25:22] = 0x00000008U - // .. .. ==> MASK : 0x03C00000U VAL : 0x02000000U - // .. .. - EMIT_MASKWRITE(0XF800600C, 0x03FFFFFFU ,0x02001001U), - // .. .. reg_ddrc_w_min_non_critical_x32 = 0x1 - // .. .. ==> 0XF8006010[10:0] = 0x00000001U - // .. .. ==> MASK : 0x000007FFU VAL : 0x00000001U - // .. .. reg_ddrc_w_xact_run_length = 0x8 - // .. .. ==> 0XF8006010[14:11] = 0x00000008U - // .. .. ==> MASK : 0x00007800U VAL : 0x00004000U - // .. .. reg_ddrc_w_max_starve_x32 = 0x2 - // .. .. ==> 0XF8006010[25:15] = 0x00000002U - // .. .. ==> MASK : 0x03FF8000U VAL : 0x00010000U - // .. .. - EMIT_MASKWRITE(0XF8006010, 0x03FFFFFFU ,0x00014001U), - // .. .. reg_ddrc_t_rc = 0x1a - // .. .. ==> 0XF8006014[5:0] = 0x0000001AU - // .. .. ==> MASK : 0x0000003FU VAL : 0x0000001AU - // .. .. reg_ddrc_t_rfc_min = 0xa0 - // .. .. ==> 0XF8006014[13:6] = 0x000000A0U - // .. .. ==> MASK : 0x00003FC0U VAL : 0x00002800U - // .. .. reg_ddrc_post_selfref_gap_x32 = 0x10 - // .. .. ==> 0XF8006014[20:14] = 0x00000010U - // .. .. ==> MASK : 0x001FC000U VAL : 0x00040000U - // .. .. - EMIT_MASKWRITE(0XF8006014, 0x001FFFFFU ,0x0004281AU), - // .. .. reg_ddrc_wr2pre = 0x12 - // .. .. ==> 0XF8006018[4:0] = 0x00000012U - // .. .. ==> MASK : 0x0000001FU VAL : 0x00000012U - // .. .. reg_ddrc_powerdown_to_x32 = 0x6 - // .. .. ==> 0XF8006018[9:5] = 0x00000006U - // .. .. ==> MASK : 0x000003E0U VAL : 0x000000C0U - // .. .. reg_ddrc_t_faw = 0x16 - // .. .. ==> 0XF8006018[15:10] = 0x00000016U - // .. .. ==> MASK : 0x0000FC00U VAL : 0x00005800U - // .. .. reg_ddrc_t_ras_max = 0x24 - // .. .. ==> 0XF8006018[21:16] = 0x00000024U - // .. .. ==> MASK : 0x003F0000U VAL : 0x00240000U - // .. .. reg_ddrc_t_ras_min = 0x13 - // .. .. ==> 0XF8006018[26:22] = 0x00000013U - // .. .. ==> MASK : 0x07C00000U VAL : 0x04C00000U - // .. .. reg_ddrc_t_cke = 0x4 - // .. .. ==> 0XF8006018[31:28] = 0x00000004U - // .. .. ==> MASK : 0xF0000000U VAL : 0x40000000U - // .. .. - EMIT_MASKWRITE(0XF8006018, 0xF7FFFFFFU ,0x44E458D2U), - // .. .. reg_ddrc_write_latency = 0x5 - // .. .. ==> 0XF800601C[4:0] = 0x00000005U - // .. .. ==> MASK : 0x0000001FU VAL : 0x00000005U - // .. .. reg_ddrc_rd2wr = 0x7 - // .. .. ==> 0XF800601C[9:5] = 0x00000007U - // .. .. ==> MASK : 0x000003E0U VAL : 0x000000E0U - // .. .. reg_ddrc_wr2rd = 0xe - // .. .. ==> 0XF800601C[14:10] = 0x0000000EU - // .. .. ==> MASK : 0x00007C00U VAL : 0x00003800U - // .. .. reg_ddrc_t_xp = 0x4 - // .. .. ==> 0XF800601C[19:15] = 0x00000004U - // .. .. ==> MASK : 0x000F8000U VAL : 0x00020000U - // .. .. reg_ddrc_pad_pd = 0x0 - // .. .. ==> 0XF800601C[22:20] = 0x00000000U - // .. .. ==> MASK : 0x00700000U VAL : 0x00000000U - // .. .. reg_ddrc_rd2pre = 0x4 - // .. .. ==> 0XF800601C[27:23] = 0x00000004U - // .. .. ==> MASK : 0x0F800000U VAL : 0x02000000U - // .. .. reg_ddrc_t_rcd = 0x7 - // .. .. ==> 0XF800601C[31:28] = 0x00000007U - // .. .. ==> MASK : 0xF0000000U VAL : 0x70000000U - // .. .. - EMIT_MASKWRITE(0XF800601C, 0xFFFFFFFFU ,0x720238E5U), - // .. .. reg_ddrc_t_ccd = 0x4 - // .. .. ==> 0XF8006020[4:2] = 0x00000004U - // .. .. ==> MASK : 0x0000001CU VAL : 0x00000010U - // .. .. reg_ddrc_t_rrd = 0x6 - // .. .. ==> 0XF8006020[7:5] = 0x00000006U - // .. .. ==> MASK : 0x000000E0U VAL : 0x000000C0U - // .. .. reg_ddrc_refresh_margin = 0x2 - // .. .. ==> 0XF8006020[11:8] = 0x00000002U - // .. .. ==> MASK : 0x00000F00U VAL : 0x00000200U - // .. .. reg_ddrc_t_rp = 0x7 - // .. .. ==> 0XF8006020[15:12] = 0x00000007U - // .. .. ==> MASK : 0x0000F000U VAL : 0x00007000U - // .. .. reg_ddrc_refresh_to_x32 = 0x8 - // .. .. ==> 0XF8006020[20:16] = 0x00000008U - // .. .. ==> MASK : 0x001F0000U VAL : 0x00080000U - // .. .. reg_ddrc_sdram = 0x1 - // .. .. ==> 0XF8006020[21:21] = 0x00000001U - // .. .. ==> MASK : 0x00200000U VAL : 0x00200000U - // .. .. reg_ddrc_mobile = 0x0 - // .. .. ==> 0XF8006020[22:22] = 0x00000000U - // .. .. ==> MASK : 0x00400000U VAL : 0x00000000U - // .. .. reg_ddrc_clock_stop_en = 0x0 - // .. .. ==> 0XF8006020[23:23] = 0x00000000U - // .. .. ==> MASK : 0x00800000U VAL : 0x00000000U - // .. .. reg_ddrc_read_latency = 0x7 - // .. .. ==> 0XF8006020[28:24] = 0x00000007U - // .. .. ==> MASK : 0x1F000000U VAL : 0x07000000U - // .. .. reg_phy_mode_ddr1_ddr2 = 0x1 - // .. .. ==> 0XF8006020[29:29] = 0x00000001U - // .. .. ==> MASK : 0x20000000U VAL : 0x20000000U - // .. .. reg_ddrc_dis_pad_pd = 0x0 - // .. .. ==> 0XF8006020[30:30] = 0x00000000U - // .. .. ==> MASK : 0x40000000U VAL : 0x00000000U - // .. .. reg_ddrc_loopback = 0x0 - // .. .. ==> 0XF8006020[31:31] = 0x00000000U - // .. .. ==> MASK : 0x80000000U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006020, 0xFFFFFFFCU ,0x272872D0U), - // .. .. reg_ddrc_en_2t_timing_mode = 0x0 - // .. .. ==> 0XF8006024[0:0] = 0x00000000U - // .. .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. .. reg_ddrc_prefer_write = 0x0 - // .. .. ==> 0XF8006024[1:1] = 0x00000000U - // .. .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. .. reg_ddrc_max_rank_rd = 0xf - // .. .. ==> 0XF8006024[5:2] = 0x0000000FU - // .. .. ==> MASK : 0x0000003CU VAL : 0x0000003CU - // .. .. reg_ddrc_mr_wr = 0x0 - // .. .. ==> 0XF8006024[6:6] = 0x00000000U - // .. .. ==> MASK : 0x00000040U VAL : 0x00000000U - // .. .. reg_ddrc_mr_addr = 0x0 - // .. .. ==> 0XF8006024[8:7] = 0x00000000U - // .. .. ==> MASK : 0x00000180U VAL : 0x00000000U - // .. .. reg_ddrc_mr_data = 0x0 - // .. .. ==> 0XF8006024[24:9] = 0x00000000U - // .. .. ==> MASK : 0x01FFFE00U VAL : 0x00000000U - // .. .. ddrc_reg_mr_wr_busy = 0x0 - // .. .. ==> 0XF8006024[25:25] = 0x00000000U - // .. .. ==> MASK : 0x02000000U VAL : 0x00000000U - // .. .. reg_ddrc_mr_type = 0x0 - // .. .. ==> 0XF8006024[26:26] = 0x00000000U - // .. .. ==> MASK : 0x04000000U VAL : 0x00000000U - // .. .. reg_ddrc_mr_rdata_valid = 0x0 - // .. .. ==> 0XF8006024[27:27] = 0x00000000U - // .. .. ==> MASK : 0x08000000U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006024, 0x0FFFFFFFU ,0x0000003CU), - // .. .. reg_ddrc_final_wait_x32 = 0x7 - // .. .. ==> 0XF8006028[6:0] = 0x00000007U - // .. .. ==> MASK : 0x0000007FU VAL : 0x00000007U - // .. .. reg_ddrc_pre_ocd_x32 = 0x0 - // .. .. ==> 0XF8006028[10:7] = 0x00000000U - // .. .. ==> MASK : 0x00000780U VAL : 0x00000000U - // .. .. reg_ddrc_t_mrd = 0x4 - // .. .. ==> 0XF8006028[13:11] = 0x00000004U - // .. .. ==> MASK : 0x00003800U VAL : 0x00002000U - // .. .. - EMIT_MASKWRITE(0XF8006028, 0x00003FFFU ,0x00002007U), - // .. .. reg_ddrc_emr2 = 0x8 - // .. .. ==> 0XF800602C[15:0] = 0x00000008U - // .. .. ==> MASK : 0x0000FFFFU VAL : 0x00000008U - // .. .. reg_ddrc_emr3 = 0x0 - // .. .. ==> 0XF800602C[31:16] = 0x00000000U - // .. .. ==> MASK : 0xFFFF0000U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF800602C, 0xFFFFFFFFU ,0x00000008U), - // .. .. reg_ddrc_mr = 0x930 - // .. .. ==> 0XF8006030[15:0] = 0x00000930U - // .. .. ==> MASK : 0x0000FFFFU VAL : 0x00000930U - // .. .. reg_ddrc_emr = 0x4 - // .. .. ==> 0XF8006030[31:16] = 0x00000004U - // .. .. ==> MASK : 0xFFFF0000U VAL : 0x00040000U - // .. .. - EMIT_MASKWRITE(0XF8006030, 0xFFFFFFFFU ,0x00040930U), - // .. .. reg_ddrc_burst_rdwr = 0x4 - // .. .. ==> 0XF8006034[3:0] = 0x00000004U - // .. .. ==> MASK : 0x0000000FU VAL : 0x00000004U - // .. .. reg_ddrc_pre_cke_x1024 = 0x105 - // .. .. ==> 0XF8006034[13:4] = 0x00000105U - // .. .. ==> MASK : 0x00003FF0U VAL : 0x00001050U - // .. .. reg_ddrc_post_cke_x1024 = 0x1 - // .. .. ==> 0XF8006034[25:16] = 0x00000001U - // .. .. ==> MASK : 0x03FF0000U VAL : 0x00010000U - // .. .. reg_ddrc_burstchop = 0x0 - // .. .. ==> 0XF8006034[28:28] = 0x00000000U - // .. .. ==> MASK : 0x10000000U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006034, 0x13FF3FFFU ,0x00011054U), - // .. .. reg_ddrc_force_low_pri_n = 0x0 - // .. .. ==> 0XF8006038[0:0] = 0x00000000U - // .. .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. .. reg_ddrc_dis_dq = 0x0 - // .. .. ==> 0XF8006038[1:1] = 0x00000000U - // .. .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. .. reg_phy_debug_mode = 0x0 - // .. .. ==> 0XF8006038[6:6] = 0x00000000U - // .. .. ==> MASK : 0x00000040U VAL : 0x00000000U - // .. .. reg_phy_wr_level_start = 0x0 - // .. .. ==> 0XF8006038[7:7] = 0x00000000U - // .. .. ==> MASK : 0x00000080U VAL : 0x00000000U - // .. .. reg_phy_rd_level_start = 0x0 - // .. .. ==> 0XF8006038[8:8] = 0x00000000U - // .. .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. .. reg_phy_dq0_wait_t = 0x0 - // .. .. ==> 0XF8006038[12:9] = 0x00000000U - // .. .. ==> MASK : 0x00001E00U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006038, 0x00001FC3U ,0x00000000U), - // .. .. reg_ddrc_addrmap_bank_b0 = 0x7 - // .. .. ==> 0XF800603C[3:0] = 0x00000007U - // .. .. ==> MASK : 0x0000000FU VAL : 0x00000007U - // .. .. reg_ddrc_addrmap_bank_b1 = 0x7 - // .. .. ==> 0XF800603C[7:4] = 0x00000007U - // .. .. ==> MASK : 0x000000F0U VAL : 0x00000070U - // .. .. reg_ddrc_addrmap_bank_b2 = 0x7 - // .. .. ==> 0XF800603C[11:8] = 0x00000007U - // .. .. ==> MASK : 0x00000F00U VAL : 0x00000700U - // .. .. reg_ddrc_addrmap_col_b5 = 0x0 - // .. .. ==> 0XF800603C[15:12] = 0x00000000U - // .. .. ==> MASK : 0x0000F000U VAL : 0x00000000U - // .. .. reg_ddrc_addrmap_col_b6 = 0x0 - // .. .. ==> 0XF800603C[19:16] = 0x00000000U - // .. .. ==> MASK : 0x000F0000U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF800603C, 0x000FFFFFU ,0x00000777U), - // .. .. reg_ddrc_addrmap_col_b2 = 0x0 - // .. .. ==> 0XF8006040[3:0] = 0x00000000U - // .. .. ==> MASK : 0x0000000FU VAL : 0x00000000U - // .. .. reg_ddrc_addrmap_col_b3 = 0x0 - // .. .. ==> 0XF8006040[7:4] = 0x00000000U - // .. .. ==> MASK : 0x000000F0U VAL : 0x00000000U - // .. .. reg_ddrc_addrmap_col_b4 = 0x0 - // .. .. ==> 0XF8006040[11:8] = 0x00000000U - // .. .. ==> MASK : 0x00000F00U VAL : 0x00000000U - // .. .. reg_ddrc_addrmap_col_b7 = 0x0 - // .. .. ==> 0XF8006040[15:12] = 0x00000000U - // .. .. ==> MASK : 0x0000F000U VAL : 0x00000000U - // .. .. reg_ddrc_addrmap_col_b8 = 0x0 - // .. .. ==> 0XF8006040[19:16] = 0x00000000U - // .. .. ==> MASK : 0x000F0000U VAL : 0x00000000U - // .. .. reg_ddrc_addrmap_col_b9 = 0xf - // .. .. ==> 0XF8006040[23:20] = 0x0000000FU - // .. .. ==> MASK : 0x00F00000U VAL : 0x00F00000U - // .. .. reg_ddrc_addrmap_col_b10 = 0xf - // .. .. ==> 0XF8006040[27:24] = 0x0000000FU - // .. .. ==> MASK : 0x0F000000U VAL : 0x0F000000U - // .. .. reg_ddrc_addrmap_col_b11 = 0xf - // .. .. ==> 0XF8006040[31:28] = 0x0000000FU - // .. .. ==> MASK : 0xF0000000U VAL : 0xF0000000U - // .. .. - EMIT_MASKWRITE(0XF8006040, 0xFFFFFFFFU ,0xFFF00000U), - // .. .. reg_ddrc_addrmap_row_b0 = 0x6 - // .. .. ==> 0XF8006044[3:0] = 0x00000006U - // .. .. ==> MASK : 0x0000000FU VAL : 0x00000006U - // .. .. reg_ddrc_addrmap_row_b1 = 0x6 - // .. .. ==> 0XF8006044[7:4] = 0x00000006U - // .. .. ==> MASK : 0x000000F0U VAL : 0x00000060U - // .. .. reg_ddrc_addrmap_row_b2_11 = 0x6 - // .. .. ==> 0XF8006044[11:8] = 0x00000006U - // .. .. ==> MASK : 0x00000F00U VAL : 0x00000600U - // .. .. reg_ddrc_addrmap_row_b12 = 0x6 - // .. .. ==> 0XF8006044[15:12] = 0x00000006U - // .. .. ==> MASK : 0x0000F000U VAL : 0x00006000U - // .. .. reg_ddrc_addrmap_row_b13 = 0x6 - // .. .. ==> 0XF8006044[19:16] = 0x00000006U - // .. .. ==> MASK : 0x000F0000U VAL : 0x00060000U - // .. .. reg_ddrc_addrmap_row_b14 = 0x6 - // .. .. ==> 0XF8006044[23:20] = 0x00000006U - // .. .. ==> MASK : 0x00F00000U VAL : 0x00600000U - // .. .. reg_ddrc_addrmap_row_b15 = 0xf - // .. .. ==> 0XF8006044[27:24] = 0x0000000FU - // .. .. ==> MASK : 0x0F000000U VAL : 0x0F000000U - // .. .. - EMIT_MASKWRITE(0XF8006044, 0x0FFFFFFFU ,0x0F666666U), - // .. .. reg_ddrc_rank0_rd_odt = 0x0 - // .. .. ==> 0XF8006048[2:0] = 0x00000000U - // .. .. ==> MASK : 0x00000007U VAL : 0x00000000U - // .. .. reg_ddrc_rank0_wr_odt = 0x1 - // .. .. ==> 0XF8006048[5:3] = 0x00000001U - // .. .. ==> MASK : 0x00000038U VAL : 0x00000008U - // .. .. reg_ddrc_rank1_rd_odt = 0x1 - // .. .. ==> 0XF8006048[8:6] = 0x00000001U - // .. .. ==> MASK : 0x000001C0U VAL : 0x00000040U - // .. .. reg_ddrc_rank1_wr_odt = 0x1 - // .. .. ==> 0XF8006048[11:9] = 0x00000001U - // .. .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. .. reg_phy_rd_local_odt = 0x0 - // .. .. ==> 0XF8006048[13:12] = 0x00000000U - // .. .. ==> MASK : 0x00003000U VAL : 0x00000000U - // .. .. reg_phy_wr_local_odt = 0x3 - // .. .. ==> 0XF8006048[15:14] = 0x00000003U - // .. .. ==> MASK : 0x0000C000U VAL : 0x0000C000U - // .. .. reg_phy_idle_local_odt = 0x3 - // .. .. ==> 0XF8006048[17:16] = 0x00000003U - // .. .. ==> MASK : 0x00030000U VAL : 0x00030000U - // .. .. reg_ddrc_rank2_rd_odt = 0x0 - // .. .. ==> 0XF8006048[20:18] = 0x00000000U - // .. .. ==> MASK : 0x001C0000U VAL : 0x00000000U - // .. .. reg_ddrc_rank2_wr_odt = 0x0 - // .. .. ==> 0XF8006048[23:21] = 0x00000000U - // .. .. ==> MASK : 0x00E00000U VAL : 0x00000000U - // .. .. reg_ddrc_rank3_rd_odt = 0x0 - // .. .. ==> 0XF8006048[26:24] = 0x00000000U - // .. .. ==> MASK : 0x07000000U VAL : 0x00000000U - // .. .. reg_ddrc_rank3_wr_odt = 0x0 - // .. .. ==> 0XF8006048[29:27] = 0x00000000U - // .. .. ==> MASK : 0x38000000U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006048, 0x3FFFFFFFU ,0x0003C248U), - // .. .. reg_phy_rd_cmd_to_data = 0x0 - // .. .. ==> 0XF8006050[3:0] = 0x00000000U - // .. .. ==> MASK : 0x0000000FU VAL : 0x00000000U - // .. .. reg_phy_wr_cmd_to_data = 0x0 - // .. .. ==> 0XF8006050[7:4] = 0x00000000U - // .. .. ==> MASK : 0x000000F0U VAL : 0x00000000U - // .. .. reg_phy_rdc_we_to_re_delay = 0x8 - // .. .. ==> 0XF8006050[11:8] = 0x00000008U - // .. .. ==> MASK : 0x00000F00U VAL : 0x00000800U - // .. .. reg_phy_rdc_fifo_rst_disable = 0x0 - // .. .. ==> 0XF8006050[15:15] = 0x00000000U - // .. .. ==> MASK : 0x00008000U VAL : 0x00000000U - // .. .. reg_phy_use_fixed_re = 0x1 - // .. .. ==> 0XF8006050[16:16] = 0x00000001U - // .. .. ==> MASK : 0x00010000U VAL : 0x00010000U - // .. .. reg_phy_rdc_fifo_rst_err_cnt_clr = 0x0 - // .. .. ==> 0XF8006050[17:17] = 0x00000000U - // .. .. ==> MASK : 0x00020000U VAL : 0x00000000U - // .. .. reg_phy_dis_phy_ctrl_rstn = 0x0 - // .. .. ==> 0XF8006050[18:18] = 0x00000000U - // .. .. ==> MASK : 0x00040000U VAL : 0x00000000U - // .. .. reg_phy_clk_stall_level = 0x0 - // .. .. ==> 0XF8006050[19:19] = 0x00000000U - // .. .. ==> MASK : 0x00080000U VAL : 0x00000000U - // .. .. reg_phy_gatelvl_num_of_dq0 = 0x7 - // .. .. ==> 0XF8006050[27:24] = 0x00000007U - // .. .. ==> MASK : 0x0F000000U VAL : 0x07000000U - // .. .. reg_phy_wrlvl_num_of_dq0 = 0x7 - // .. .. ==> 0XF8006050[31:28] = 0x00000007U - // .. .. ==> MASK : 0xF0000000U VAL : 0x70000000U - // .. .. - EMIT_MASKWRITE(0XF8006050, 0xFF0F8FFFU ,0x77010800U), - // .. .. reg_ddrc_dll_calib_to_min_x1024 = 0x1 - // .. .. ==> 0XF8006058[7:0] = 0x00000001U - // .. .. ==> MASK : 0x000000FFU VAL : 0x00000001U - // .. .. reg_ddrc_dll_calib_to_max_x1024 = 0x1 - // .. .. ==> 0XF8006058[15:8] = 0x00000001U - // .. .. ==> MASK : 0x0000FF00U VAL : 0x00000100U - // .. .. reg_ddrc_dis_dll_calib = 0x0 - // .. .. ==> 0XF8006058[16:16] = 0x00000000U - // .. .. ==> MASK : 0x00010000U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006058, 0x0001FFFFU ,0x00000101U), - // .. .. reg_ddrc_rd_odt_delay = 0x3 - // .. .. ==> 0XF800605C[3:0] = 0x00000003U - // .. .. ==> MASK : 0x0000000FU VAL : 0x00000003U - // .. .. reg_ddrc_wr_odt_delay = 0x0 - // .. .. ==> 0XF800605C[7:4] = 0x00000000U - // .. .. ==> MASK : 0x000000F0U VAL : 0x00000000U - // .. .. reg_ddrc_rd_odt_hold = 0x0 - // .. .. ==> 0XF800605C[11:8] = 0x00000000U - // .. .. ==> MASK : 0x00000F00U VAL : 0x00000000U - // .. .. reg_ddrc_wr_odt_hold = 0x5 - // .. .. ==> 0XF800605C[15:12] = 0x00000005U - // .. .. ==> MASK : 0x0000F000U VAL : 0x00005000U - // .. .. - EMIT_MASKWRITE(0XF800605C, 0x0000FFFFU ,0x00005003U), - // .. .. reg_ddrc_pageclose = 0x0 - // .. .. ==> 0XF8006060[0:0] = 0x00000000U - // .. .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. .. reg_ddrc_lpr_num_entries = 0x1f - // .. .. ==> 0XF8006060[6:1] = 0x0000001FU - // .. .. ==> MASK : 0x0000007EU VAL : 0x0000003EU - // .. .. reg_ddrc_auto_pre_en = 0x0 - // .. .. ==> 0XF8006060[7:7] = 0x00000000U - // .. .. ==> MASK : 0x00000080U VAL : 0x00000000U - // .. .. reg_ddrc_refresh_update_level = 0x0 - // .. .. ==> 0XF8006060[8:8] = 0x00000000U - // .. .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. .. reg_ddrc_dis_wc = 0x0 - // .. .. ==> 0XF8006060[9:9] = 0x00000000U - // .. .. ==> MASK : 0x00000200U VAL : 0x00000000U - // .. .. reg_ddrc_dis_collision_page_opt = 0x0 - // .. .. ==> 0XF8006060[10:10] = 0x00000000U - // .. .. ==> MASK : 0x00000400U VAL : 0x00000000U - // .. .. reg_ddrc_selfref_en = 0x0 - // .. .. ==> 0XF8006060[12:12] = 0x00000000U - // .. .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006060, 0x000017FFU ,0x0000003EU), - // .. .. reg_ddrc_go2critical_hysteresis = 0x0 - // .. .. ==> 0XF8006064[12:5] = 0x00000000U - // .. .. ==> MASK : 0x00001FE0U VAL : 0x00000000U - // .. .. reg_arb_go2critical_en = 0x1 - // .. .. ==> 0XF8006064[17:17] = 0x00000001U - // .. .. ==> MASK : 0x00020000U VAL : 0x00020000U - // .. .. - EMIT_MASKWRITE(0XF8006064, 0x00021FE0U ,0x00020000U), - // .. .. reg_ddrc_wrlvl_ww = 0x41 - // .. .. ==> 0XF8006068[7:0] = 0x00000041U - // .. .. ==> MASK : 0x000000FFU VAL : 0x00000041U - // .. .. reg_ddrc_rdlvl_rr = 0x41 - // .. .. ==> 0XF8006068[15:8] = 0x00000041U - // .. .. ==> MASK : 0x0000FF00U VAL : 0x00004100U - // .. .. reg_ddrc_dfi_t_wlmrd = 0x28 - // .. .. ==> 0XF8006068[25:16] = 0x00000028U - // .. .. ==> MASK : 0x03FF0000U VAL : 0x00280000U - // .. .. - EMIT_MASKWRITE(0XF8006068, 0x03FFFFFFU ,0x00284141U), - // .. .. dfi_t_ctrlupd_interval_min_x1024 = 0x10 - // .. .. ==> 0XF800606C[7:0] = 0x00000010U - // .. .. ==> MASK : 0x000000FFU VAL : 0x00000010U - // .. .. dfi_t_ctrlupd_interval_max_x1024 = 0x16 - // .. .. ==> 0XF800606C[15:8] = 0x00000016U - // .. .. ==> MASK : 0x0000FF00U VAL : 0x00001600U - // .. .. - EMIT_MASKWRITE(0XF800606C, 0x0000FFFFU ,0x00001610U), - // .. .. reg_ddrc_dfi_t_ctrl_delay = 0x1 - // .. .. ==> 0XF8006078[3:0] = 0x00000001U - // .. .. ==> MASK : 0x0000000FU VAL : 0x00000001U - // .. .. reg_ddrc_dfi_t_dram_clk_disable = 0x1 - // .. .. ==> 0XF8006078[7:4] = 0x00000001U - // .. .. ==> MASK : 0x000000F0U VAL : 0x00000010U - // .. .. reg_ddrc_dfi_t_dram_clk_enable = 0x1 - // .. .. ==> 0XF8006078[11:8] = 0x00000001U - // .. .. ==> MASK : 0x00000F00U VAL : 0x00000100U - // .. .. reg_ddrc_t_cksre = 0x6 - // .. .. ==> 0XF8006078[15:12] = 0x00000006U - // .. .. ==> MASK : 0x0000F000U VAL : 0x00006000U - // .. .. reg_ddrc_t_cksrx = 0x6 - // .. .. ==> 0XF8006078[19:16] = 0x00000006U - // .. .. ==> MASK : 0x000F0000U VAL : 0x00060000U - // .. .. reg_ddrc_t_ckesr = 0x4 - // .. .. ==> 0XF8006078[25:20] = 0x00000004U - // .. .. ==> MASK : 0x03F00000U VAL : 0x00400000U - // .. .. - EMIT_MASKWRITE(0XF8006078, 0x03FFFFFFU ,0x00466111U), - // .. .. reg_ddrc_t_ckpde = 0x2 - // .. .. ==> 0XF800607C[3:0] = 0x00000002U - // .. .. ==> MASK : 0x0000000FU VAL : 0x00000002U - // .. .. reg_ddrc_t_ckpdx = 0x2 - // .. .. ==> 0XF800607C[7:4] = 0x00000002U - // .. .. ==> MASK : 0x000000F0U VAL : 0x00000020U - // .. .. reg_ddrc_t_ckdpde = 0x2 - // .. .. ==> 0XF800607C[11:8] = 0x00000002U - // .. .. ==> MASK : 0x00000F00U VAL : 0x00000200U - // .. .. reg_ddrc_t_ckdpdx = 0x2 - // .. .. ==> 0XF800607C[15:12] = 0x00000002U - // .. .. ==> MASK : 0x0000F000U VAL : 0x00002000U - // .. .. reg_ddrc_t_ckcsx = 0x3 - // .. .. ==> 0XF800607C[19:16] = 0x00000003U - // .. .. ==> MASK : 0x000F0000U VAL : 0x00030000U - // .. .. - EMIT_MASKWRITE(0XF800607C, 0x000FFFFFU ,0x00032222U), - // .. .. refresh_timer0_start_value_x32 = 0x0 - // .. .. ==> 0XF80060A0[11:0] = 0x00000000U - // .. .. ==> MASK : 0x00000FFFU VAL : 0x00000000U - // .. .. refresh_timer1_start_value_x32 = 0x8 - // .. .. ==> 0XF80060A0[23:12] = 0x00000008U - // .. .. ==> MASK : 0x00FFF000U VAL : 0x00008000U - // .. .. - EMIT_MASKWRITE(0XF80060A0, 0x00FFFFFFU ,0x00008000U), - // .. .. reg_ddrc_dis_auto_zq = 0x0 - // .. .. ==> 0XF80060A4[0:0] = 0x00000000U - // .. .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. .. reg_ddrc_ddr3 = 0x1 - // .. .. ==> 0XF80060A4[1:1] = 0x00000001U - // .. .. ==> MASK : 0x00000002U VAL : 0x00000002U - // .. .. reg_ddrc_t_mod = 0x200 - // .. .. ==> 0XF80060A4[11:2] = 0x00000200U - // .. .. ==> MASK : 0x00000FFCU VAL : 0x00000800U - // .. .. reg_ddrc_t_zq_long_nop = 0x200 - // .. .. ==> 0XF80060A4[21:12] = 0x00000200U - // .. .. ==> MASK : 0x003FF000U VAL : 0x00200000U - // .. .. reg_ddrc_t_zq_short_nop = 0x40 - // .. .. ==> 0XF80060A4[31:22] = 0x00000040U - // .. .. ==> MASK : 0xFFC00000U VAL : 0x10000000U - // .. .. - EMIT_MASKWRITE(0XF80060A4, 0xFFFFFFFFU ,0x10200802U), - // .. .. t_zq_short_interval_x1024 = 0xcb73 - // .. .. ==> 0XF80060A8[19:0] = 0x0000CB73U - // .. .. ==> MASK : 0x000FFFFFU VAL : 0x0000CB73U - // .. .. dram_rstn_x1024 = 0x69 - // .. .. ==> 0XF80060A8[27:20] = 0x00000069U - // .. .. ==> MASK : 0x0FF00000U VAL : 0x06900000U - // .. .. - EMIT_MASKWRITE(0XF80060A8, 0x0FFFFFFFU ,0x0690CB73U), - // .. .. deeppowerdown_en = 0x0 - // .. .. ==> 0XF80060AC[0:0] = 0x00000000U - // .. .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. .. deeppowerdown_to_x1024 = 0xff - // .. .. ==> 0XF80060AC[8:1] = 0x000000FFU - // .. .. ==> MASK : 0x000001FEU VAL : 0x000001FEU - // .. .. - EMIT_MASKWRITE(0XF80060AC, 0x000001FFU ,0x000001FEU), - // .. .. dfi_wrlvl_max_x1024 = 0xfff - // .. .. ==> 0XF80060B0[11:0] = 0x00000FFFU - // .. .. ==> MASK : 0x00000FFFU VAL : 0x00000FFFU - // .. .. dfi_rdlvl_max_x1024 = 0xfff - // .. .. ==> 0XF80060B0[23:12] = 0x00000FFFU - // .. .. ==> MASK : 0x00FFF000U VAL : 0x00FFF000U - // .. .. ddrc_reg_twrlvl_max_error = 0x0 - // .. .. ==> 0XF80060B0[24:24] = 0x00000000U - // .. .. ==> MASK : 0x01000000U VAL : 0x00000000U - // .. .. ddrc_reg_trdlvl_max_error = 0x0 - // .. .. ==> 0XF80060B0[25:25] = 0x00000000U - // .. .. ==> MASK : 0x02000000U VAL : 0x00000000U - // .. .. reg_ddrc_dfi_wr_level_en = 0x1 - // .. .. ==> 0XF80060B0[26:26] = 0x00000001U - // .. .. ==> MASK : 0x04000000U VAL : 0x04000000U - // .. .. reg_ddrc_dfi_rd_dqs_gate_level = 0x1 - // .. .. ==> 0XF80060B0[27:27] = 0x00000001U - // .. .. ==> MASK : 0x08000000U VAL : 0x08000000U - // .. .. reg_ddrc_dfi_rd_data_eye_train = 0x1 - // .. .. ==> 0XF80060B0[28:28] = 0x00000001U - // .. .. ==> MASK : 0x10000000U VAL : 0x10000000U - // .. .. - EMIT_MASKWRITE(0XF80060B0, 0x1FFFFFFFU ,0x1CFFFFFFU), - // .. .. reg_ddrc_2t_delay = 0x0 - // .. .. ==> 0XF80060B4[8:0] = 0x00000000U - // .. .. ==> MASK : 0x000001FFU VAL : 0x00000000U - // .. .. reg_ddrc_skip_ocd = 0x1 - // .. .. ==> 0XF80060B4[9:9] = 0x00000001U - // .. .. ==> MASK : 0x00000200U VAL : 0x00000200U - // .. .. reg_ddrc_dis_pre_bypass = 0x0 - // .. .. ==> 0XF80060B4[10:10] = 0x00000000U - // .. .. ==> MASK : 0x00000400U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF80060B4, 0x000007FFU ,0x00000200U), - // .. .. reg_ddrc_dfi_t_rddata_en = 0x6 - // .. .. ==> 0XF80060B8[4:0] = 0x00000006U - // .. .. ==> MASK : 0x0000001FU VAL : 0x00000006U - // .. .. reg_ddrc_dfi_t_ctrlup_min = 0x3 - // .. .. ==> 0XF80060B8[14:5] = 0x00000003U - // .. .. ==> MASK : 0x00007FE0U VAL : 0x00000060U - // .. .. reg_ddrc_dfi_t_ctrlup_max = 0x40 - // .. .. ==> 0XF80060B8[24:15] = 0x00000040U - // .. .. ==> MASK : 0x01FF8000U VAL : 0x00200000U - // .. .. - EMIT_MASKWRITE(0XF80060B8, 0x01FFFFFFU ,0x00200066U), - // .. .. START: RESET ECC ERROR - // .. .. Clear_Uncorrectable_DRAM_ECC_error = 1 - // .. .. ==> 0XF80060C4[0:0] = 0x00000001U - // .. .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. .. Clear_Correctable_DRAM_ECC_error = 1 - // .. .. ==> 0XF80060C4[1:1] = 0x00000001U - // .. .. ==> MASK : 0x00000002U VAL : 0x00000002U - // .. .. - EMIT_MASKWRITE(0XF80060C4, 0x00000003U ,0x00000003U), - // .. .. FINISH: RESET ECC ERROR - // .. .. Clear_Uncorrectable_DRAM_ECC_error = 0x0 - // .. .. ==> 0XF80060C4[0:0] = 0x00000000U - // .. .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. .. Clear_Correctable_DRAM_ECC_error = 0x0 - // .. .. ==> 0XF80060C4[1:1] = 0x00000000U - // .. .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF80060C4, 0x00000003U ,0x00000000U), - // .. .. CORR_ECC_LOG_VALID = 0x0 - // .. .. ==> 0XF80060C8[0:0] = 0x00000000U - // .. .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. .. ECC_CORRECTED_BIT_NUM = 0x0 - // .. .. ==> 0XF80060C8[7:1] = 0x00000000U - // .. .. ==> MASK : 0x000000FEU VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF80060C8, 0x000000FFU ,0x00000000U), - // .. .. UNCORR_ECC_LOG_VALID = 0x0 - // .. .. ==> 0XF80060DC[0:0] = 0x00000000U - // .. .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF80060DC, 0x00000001U ,0x00000000U), - // .. .. STAT_NUM_CORR_ERR = 0x0 - // .. .. ==> 0XF80060F0[15:8] = 0x00000000U - // .. .. ==> MASK : 0x0000FF00U VAL : 0x00000000U - // .. .. STAT_NUM_UNCORR_ERR = 0x0 - // .. .. ==> 0XF80060F0[7:0] = 0x00000000U - // .. .. ==> MASK : 0x000000FFU VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF80060F0, 0x0000FFFFU ,0x00000000U), - // .. .. reg_ddrc_ecc_mode = 0x0 - // .. .. ==> 0XF80060F4[2:0] = 0x00000000U - // .. .. ==> MASK : 0x00000007U VAL : 0x00000000U - // .. .. reg_ddrc_dis_scrub = 0x1 - // .. .. ==> 0XF80060F4[3:3] = 0x00000001U - // .. .. ==> MASK : 0x00000008U VAL : 0x00000008U - // .. .. - EMIT_MASKWRITE(0XF80060F4, 0x0000000FU ,0x00000008U), - // .. .. reg_phy_dif_on = 0x0 - // .. .. ==> 0XF8006114[3:0] = 0x00000000U - // .. .. ==> MASK : 0x0000000FU VAL : 0x00000000U - // .. .. reg_phy_dif_off = 0x0 - // .. .. ==> 0XF8006114[7:4] = 0x00000000U - // .. .. ==> MASK : 0x000000F0U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006114, 0x000000FFU ,0x00000000U), - // .. .. reg_phy_data_slice_in_use = 0x1 - // .. .. ==> 0XF8006118[0:0] = 0x00000001U - // .. .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. .. reg_phy_rdlvl_inc_mode = 0x0 - // .. .. ==> 0XF8006118[1:1] = 0x00000000U - // .. .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. .. reg_phy_gatelvl_inc_mode = 0x0 - // .. .. ==> 0XF8006118[2:2] = 0x00000000U - // .. .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. .. reg_phy_wrlvl_inc_mode = 0x0 - // .. .. ==> 0XF8006118[3:3] = 0x00000000U - // .. .. ==> MASK : 0x00000008U VAL : 0x00000000U - // .. .. reg_phy_board_lpbk_tx = 0x0 - // .. .. ==> 0XF8006118[4:4] = 0x00000000U - // .. .. ==> MASK : 0x00000010U VAL : 0x00000000U - // .. .. reg_phy_board_lpbk_rx = 0x0 - // .. .. ==> 0XF8006118[5:5] = 0x00000000U - // .. .. ==> MASK : 0x00000020U VAL : 0x00000000U - // .. .. reg_phy_bist_shift_dq = 0x0 - // .. .. ==> 0XF8006118[14:6] = 0x00000000U - // .. .. ==> MASK : 0x00007FC0U VAL : 0x00000000U - // .. .. reg_phy_bist_err_clr = 0x0 - // .. .. ==> 0XF8006118[23:15] = 0x00000000U - // .. .. ==> MASK : 0x00FF8000U VAL : 0x00000000U - // .. .. reg_phy_dq_offset = 0x40 - // .. .. ==> 0XF8006118[30:24] = 0x00000040U - // .. .. ==> MASK : 0x7F000000U VAL : 0x40000000U - // .. .. - EMIT_MASKWRITE(0XF8006118, 0x7FFFFFFFU ,0x40000001U), - // .. .. reg_phy_data_slice_in_use = 0x1 - // .. .. ==> 0XF800611C[0:0] = 0x00000001U - // .. .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. .. reg_phy_rdlvl_inc_mode = 0x0 - // .. .. ==> 0XF800611C[1:1] = 0x00000000U - // .. .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. .. reg_phy_gatelvl_inc_mode = 0x0 - // .. .. ==> 0XF800611C[2:2] = 0x00000000U - // .. .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. .. reg_phy_wrlvl_inc_mode = 0x0 - // .. .. ==> 0XF800611C[3:3] = 0x00000000U - // .. .. ==> MASK : 0x00000008U VAL : 0x00000000U - // .. .. reg_phy_board_lpbk_tx = 0x0 - // .. .. ==> 0XF800611C[4:4] = 0x00000000U - // .. .. ==> MASK : 0x00000010U VAL : 0x00000000U - // .. .. reg_phy_board_lpbk_rx = 0x0 - // .. .. ==> 0XF800611C[5:5] = 0x00000000U - // .. .. ==> MASK : 0x00000020U VAL : 0x00000000U - // .. .. reg_phy_bist_shift_dq = 0x0 - // .. .. ==> 0XF800611C[14:6] = 0x00000000U - // .. .. ==> MASK : 0x00007FC0U VAL : 0x00000000U - // .. .. reg_phy_bist_err_clr = 0x0 - // .. .. ==> 0XF800611C[23:15] = 0x00000000U - // .. .. ==> MASK : 0x00FF8000U VAL : 0x00000000U - // .. .. reg_phy_dq_offset = 0x40 - // .. .. ==> 0XF800611C[30:24] = 0x00000040U - // .. .. ==> MASK : 0x7F000000U VAL : 0x40000000U - // .. .. - EMIT_MASKWRITE(0XF800611C, 0x7FFFFFFFU ,0x40000001U), - // .. .. reg_phy_data_slice_in_use = 0x1 - // .. .. ==> 0XF8006120[0:0] = 0x00000001U - // .. .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. .. reg_phy_rdlvl_inc_mode = 0x0 - // .. .. ==> 0XF8006120[1:1] = 0x00000000U - // .. .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. .. reg_phy_gatelvl_inc_mode = 0x0 - // .. .. ==> 0XF8006120[2:2] = 0x00000000U - // .. .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. .. reg_phy_wrlvl_inc_mode = 0x0 - // .. .. ==> 0XF8006120[3:3] = 0x00000000U - // .. .. ==> MASK : 0x00000008U VAL : 0x00000000U - // .. .. reg_phy_board_lpbk_tx = 0x0 - // .. .. ==> 0XF8006120[4:4] = 0x00000000U - // .. .. ==> MASK : 0x00000010U VAL : 0x00000000U - // .. .. reg_phy_board_lpbk_rx = 0x0 - // .. .. ==> 0XF8006120[5:5] = 0x00000000U - // .. .. ==> MASK : 0x00000020U VAL : 0x00000000U - // .. .. reg_phy_bist_shift_dq = 0x0 - // .. .. ==> 0XF8006120[14:6] = 0x00000000U - // .. .. ==> MASK : 0x00007FC0U VAL : 0x00000000U - // .. .. reg_phy_bist_err_clr = 0x0 - // .. .. ==> 0XF8006120[23:15] = 0x00000000U - // .. .. ==> MASK : 0x00FF8000U VAL : 0x00000000U - // .. .. reg_phy_dq_offset = 0x40 - // .. .. ==> 0XF8006120[30:24] = 0x00000040U - // .. .. ==> MASK : 0x7F000000U VAL : 0x40000000U - // .. .. reg_phy_data_slice_in_use = 0x1 - // .. .. ==> 0XF8006120[0:0] = 0x00000001U - // .. .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. .. reg_phy_rdlvl_inc_mode = 0x0 - // .. .. ==> 0XF8006120[1:1] = 0x00000000U - // .. .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. .. reg_phy_gatelvl_inc_mode = 0x0 - // .. .. ==> 0XF8006120[2:2] = 0x00000000U - // .. .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. .. reg_phy_wrlvl_inc_mode = 0x0 - // .. .. ==> 0XF8006120[3:3] = 0x00000000U - // .. .. ==> MASK : 0x00000008U VAL : 0x00000000U - // .. .. reg_phy_board_lpbk_tx = 0x0 - // .. .. ==> 0XF8006120[4:4] = 0x00000000U - // .. .. ==> MASK : 0x00000010U VAL : 0x00000000U - // .. .. reg_phy_board_lpbk_rx = 0x0 - // .. .. ==> 0XF8006120[5:5] = 0x00000000U - // .. .. ==> MASK : 0x00000020U VAL : 0x00000000U - // .. .. reg_phy_bist_shift_dq = 0x0 - // .. .. ==> 0XF8006120[14:6] = 0x00000000U - // .. .. ==> MASK : 0x00007FC0U VAL : 0x00000000U - // .. .. reg_phy_bist_err_clr = 0x0 - // .. .. ==> 0XF8006120[23:15] = 0x00000000U - // .. .. ==> MASK : 0x00FF8000U VAL : 0x00000000U - // .. .. reg_phy_dq_offset = 0x40 - // .. .. ==> 0XF8006120[30:24] = 0x00000040U - // .. .. ==> MASK : 0x7F000000U VAL : 0x40000000U - // .. .. - EMIT_MASKWRITE(0XF8006120, 0x7FFFFFFFU ,0x40000001U), - // .. .. reg_phy_data_slice_in_use = 0x1 - // .. .. ==> 0XF8006124[0:0] = 0x00000001U - // .. .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. .. reg_phy_rdlvl_inc_mode = 0x0 - // .. .. ==> 0XF8006124[1:1] = 0x00000000U - // .. .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. .. reg_phy_gatelvl_inc_mode = 0x0 - // .. .. ==> 0XF8006124[2:2] = 0x00000000U - // .. .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. .. reg_phy_wrlvl_inc_mode = 0x0 - // .. .. ==> 0XF8006124[3:3] = 0x00000000U - // .. .. ==> MASK : 0x00000008U VAL : 0x00000000U - // .. .. reg_phy_board_lpbk_tx = 0x0 - // .. .. ==> 0XF8006124[4:4] = 0x00000000U - // .. .. ==> MASK : 0x00000010U VAL : 0x00000000U - // .. .. reg_phy_board_lpbk_rx = 0x0 - // .. .. ==> 0XF8006124[5:5] = 0x00000000U - // .. .. ==> MASK : 0x00000020U VAL : 0x00000000U - // .. .. reg_phy_bist_shift_dq = 0x0 - // .. .. ==> 0XF8006124[14:6] = 0x00000000U - // .. .. ==> MASK : 0x00007FC0U VAL : 0x00000000U - // .. .. reg_phy_bist_err_clr = 0x0 - // .. .. ==> 0XF8006124[23:15] = 0x00000000U - // .. .. ==> MASK : 0x00FF8000U VAL : 0x00000000U - // .. .. reg_phy_dq_offset = 0x40 - // .. .. ==> 0XF8006124[30:24] = 0x00000040U - // .. .. ==> MASK : 0x7F000000U VAL : 0x40000000U - // .. .. - EMIT_MASKWRITE(0XF8006124, 0x7FFFFFFFU ,0x40000001U), - // .. .. reg_phy_wrlvl_init_ratio = 0x0 - // .. .. ==> 0XF800612C[9:0] = 0x00000000U - // .. .. ==> MASK : 0x000003FFU VAL : 0x00000000U - // .. .. reg_phy_gatelvl_init_ratio = 0xa1 - // .. .. ==> 0XF800612C[19:10] = 0x000000A1U - // .. .. ==> MASK : 0x000FFC00U VAL : 0x00028400U - // .. .. - EMIT_MASKWRITE(0XF800612C, 0x000FFFFFU ,0x00028400U), - // .. .. reg_phy_wrlvl_init_ratio = 0x0 - // .. .. ==> 0XF8006130[9:0] = 0x00000000U - // .. .. ==> MASK : 0x000003FFU VAL : 0x00000000U - // .. .. reg_phy_gatelvl_init_ratio = 0xa0 - // .. .. ==> 0XF8006130[19:10] = 0x000000A0U - // .. .. ==> MASK : 0x000FFC00U VAL : 0x00028000U - // .. .. - EMIT_MASKWRITE(0XF8006130, 0x000FFFFFU ,0x00028000U), - // .. .. reg_phy_wrlvl_init_ratio = 0x7 - // .. .. ==> 0XF8006134[9:0] = 0x00000007U - // .. .. ==> MASK : 0x000003FFU VAL : 0x00000007U - // .. .. reg_phy_gatelvl_init_ratio = 0xad - // .. .. ==> 0XF8006134[19:10] = 0x000000ADU - // .. .. ==> MASK : 0x000FFC00U VAL : 0x0002B400U - // .. .. - EMIT_MASKWRITE(0XF8006134, 0x000FFFFFU ,0x0002B407U), - // .. .. reg_phy_wrlvl_init_ratio = 0x7 - // .. .. ==> 0XF8006138[9:0] = 0x00000007U - // .. .. ==> MASK : 0x000003FFU VAL : 0x00000007U - // .. .. reg_phy_gatelvl_init_ratio = 0xad - // .. .. ==> 0XF8006138[19:10] = 0x000000ADU - // .. .. ==> MASK : 0x000FFC00U VAL : 0x0002B400U - // .. .. - EMIT_MASKWRITE(0XF8006138, 0x000FFFFFU ,0x0002B407U), - // .. .. reg_phy_rd_dqs_slave_ratio = 0x35 - // .. .. ==> 0XF8006140[9:0] = 0x00000035U - // .. .. ==> MASK : 0x000003FFU VAL : 0x00000035U - // .. .. reg_phy_rd_dqs_slave_force = 0x0 - // .. .. ==> 0XF8006140[10:10] = 0x00000000U - // .. .. ==> MASK : 0x00000400U VAL : 0x00000000U - // .. .. reg_phy_rd_dqs_slave_delay = 0x0 - // .. .. ==> 0XF8006140[19:11] = 0x00000000U - // .. .. ==> MASK : 0x000FF800U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006140, 0x000FFFFFU ,0x00000035U), - // .. .. reg_phy_rd_dqs_slave_ratio = 0x35 - // .. .. ==> 0XF8006144[9:0] = 0x00000035U - // .. .. ==> MASK : 0x000003FFU VAL : 0x00000035U - // .. .. reg_phy_rd_dqs_slave_force = 0x0 - // .. .. ==> 0XF8006144[10:10] = 0x00000000U - // .. .. ==> MASK : 0x00000400U VAL : 0x00000000U - // .. .. reg_phy_rd_dqs_slave_delay = 0x0 - // .. .. ==> 0XF8006144[19:11] = 0x00000000U - // .. .. ==> MASK : 0x000FF800U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006144, 0x000FFFFFU ,0x00000035U), - // .. .. reg_phy_rd_dqs_slave_ratio = 0x35 - // .. .. ==> 0XF8006148[9:0] = 0x00000035U - // .. .. ==> MASK : 0x000003FFU VAL : 0x00000035U - // .. .. reg_phy_rd_dqs_slave_force = 0x0 - // .. .. ==> 0XF8006148[10:10] = 0x00000000U - // .. .. ==> MASK : 0x00000400U VAL : 0x00000000U - // .. .. reg_phy_rd_dqs_slave_delay = 0x0 - // .. .. ==> 0XF8006148[19:11] = 0x00000000U - // .. .. ==> MASK : 0x000FF800U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006148, 0x000FFFFFU ,0x00000035U), - // .. .. reg_phy_rd_dqs_slave_ratio = 0x35 - // .. .. ==> 0XF800614C[9:0] = 0x00000035U - // .. .. ==> MASK : 0x000003FFU VAL : 0x00000035U - // .. .. reg_phy_rd_dqs_slave_force = 0x0 - // .. .. ==> 0XF800614C[10:10] = 0x00000000U - // .. .. ==> MASK : 0x00000400U VAL : 0x00000000U - // .. .. reg_phy_rd_dqs_slave_delay = 0x0 - // .. .. ==> 0XF800614C[19:11] = 0x00000000U - // .. .. ==> MASK : 0x000FF800U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF800614C, 0x000FFFFFU ,0x00000035U), - // .. .. reg_phy_wr_dqs_slave_ratio = 0x7c - // .. .. ==> 0XF8006154[9:0] = 0x0000007CU - // .. .. ==> MASK : 0x000003FFU VAL : 0x0000007CU - // .. .. reg_phy_wr_dqs_slave_force = 0x0 - // .. .. ==> 0XF8006154[10:10] = 0x00000000U - // .. .. ==> MASK : 0x00000400U VAL : 0x00000000U - // .. .. reg_phy_wr_dqs_slave_delay = 0x0 - // .. .. ==> 0XF8006154[19:11] = 0x00000000U - // .. .. ==> MASK : 0x000FF800U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006154, 0x000FFFFFU ,0x0000007CU), - // .. .. reg_phy_wr_dqs_slave_ratio = 0x7c - // .. .. ==> 0XF8006158[9:0] = 0x0000007CU - // .. .. ==> MASK : 0x000003FFU VAL : 0x0000007CU - // .. .. reg_phy_wr_dqs_slave_force = 0x0 - // .. .. ==> 0XF8006158[10:10] = 0x00000000U - // .. .. ==> MASK : 0x00000400U VAL : 0x00000000U - // .. .. reg_phy_wr_dqs_slave_delay = 0x0 - // .. .. ==> 0XF8006158[19:11] = 0x00000000U - // .. .. ==> MASK : 0x000FF800U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006158, 0x000FFFFFU ,0x0000007CU), - // .. .. reg_phy_wr_dqs_slave_ratio = 0x87 - // .. .. ==> 0XF800615C[9:0] = 0x00000087U - // .. .. ==> MASK : 0x000003FFU VAL : 0x00000087U - // .. .. reg_phy_wr_dqs_slave_force = 0x0 - // .. .. ==> 0XF800615C[10:10] = 0x00000000U - // .. .. ==> MASK : 0x00000400U VAL : 0x00000000U - // .. .. reg_phy_wr_dqs_slave_delay = 0x0 - // .. .. ==> 0XF800615C[19:11] = 0x00000000U - // .. .. ==> MASK : 0x000FF800U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF800615C, 0x000FFFFFU ,0x00000087U), - // .. .. reg_phy_wr_dqs_slave_ratio = 0x87 - // .. .. ==> 0XF8006160[9:0] = 0x00000087U - // .. .. ==> MASK : 0x000003FFU VAL : 0x00000087U - // .. .. reg_phy_wr_dqs_slave_force = 0x0 - // .. .. ==> 0XF8006160[10:10] = 0x00000000U - // .. .. ==> MASK : 0x00000400U VAL : 0x00000000U - // .. .. reg_phy_wr_dqs_slave_delay = 0x0 - // .. .. ==> 0XF8006160[19:11] = 0x00000000U - // .. .. ==> MASK : 0x000FF800U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006160, 0x000FFFFFU ,0x00000087U), - // .. .. reg_phy_fifo_we_slave_ratio = 0xf6 - // .. .. ==> 0XF8006168[10:0] = 0x000000F6U - // .. .. ==> MASK : 0x000007FFU VAL : 0x000000F6U - // .. .. reg_phy_fifo_we_in_force = 0x0 - // .. .. ==> 0XF8006168[11:11] = 0x00000000U - // .. .. ==> MASK : 0x00000800U VAL : 0x00000000U - // .. .. reg_phy_fifo_we_in_delay = 0x0 - // .. .. ==> 0XF8006168[20:12] = 0x00000000U - // .. .. ==> MASK : 0x001FF000U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006168, 0x001FFFFFU ,0x000000F6U), - // .. .. reg_phy_fifo_we_slave_ratio = 0xf5 - // .. .. ==> 0XF800616C[10:0] = 0x000000F5U - // .. .. ==> MASK : 0x000007FFU VAL : 0x000000F5U - // .. .. reg_phy_fifo_we_in_force = 0x0 - // .. .. ==> 0XF800616C[11:11] = 0x00000000U - // .. .. ==> MASK : 0x00000800U VAL : 0x00000000U - // .. .. reg_phy_fifo_we_in_delay = 0x0 - // .. .. ==> 0XF800616C[20:12] = 0x00000000U - // .. .. ==> MASK : 0x001FF000U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF800616C, 0x001FFFFFU ,0x000000F5U), - // .. .. reg_phy_fifo_we_slave_ratio = 0x102 - // .. .. ==> 0XF8006170[10:0] = 0x00000102U - // .. .. ==> MASK : 0x000007FFU VAL : 0x00000102U - // .. .. reg_phy_fifo_we_in_force = 0x0 - // .. .. ==> 0XF8006170[11:11] = 0x00000000U - // .. .. ==> MASK : 0x00000800U VAL : 0x00000000U - // .. .. reg_phy_fifo_we_in_delay = 0x0 - // .. .. ==> 0XF8006170[20:12] = 0x00000000U - // .. .. ==> MASK : 0x001FF000U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006170, 0x001FFFFFU ,0x00000102U), - // .. .. reg_phy_fifo_we_slave_ratio = 0x102 - // .. .. ==> 0XF8006174[10:0] = 0x00000102U - // .. .. ==> MASK : 0x000007FFU VAL : 0x00000102U - // .. .. reg_phy_fifo_we_in_force = 0x0 - // .. .. ==> 0XF8006174[11:11] = 0x00000000U - // .. .. ==> MASK : 0x00000800U VAL : 0x00000000U - // .. .. reg_phy_fifo_we_in_delay = 0x0 - // .. .. ==> 0XF8006174[20:12] = 0x00000000U - // .. .. ==> MASK : 0x001FF000U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006174, 0x001FFFFFU ,0x00000102U), - // .. .. reg_phy_wr_data_slave_ratio = 0xbc - // .. .. ==> 0XF800617C[9:0] = 0x000000BCU - // .. .. ==> MASK : 0x000003FFU VAL : 0x000000BCU - // .. .. reg_phy_wr_data_slave_force = 0x0 - // .. .. ==> 0XF800617C[10:10] = 0x00000000U - // .. .. ==> MASK : 0x00000400U VAL : 0x00000000U - // .. .. reg_phy_wr_data_slave_delay = 0x0 - // .. .. ==> 0XF800617C[19:11] = 0x00000000U - // .. .. ==> MASK : 0x000FF800U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF800617C, 0x000FFFFFU ,0x000000BCU), - // .. .. reg_phy_wr_data_slave_ratio = 0xbc - // .. .. ==> 0XF8006180[9:0] = 0x000000BCU - // .. .. ==> MASK : 0x000003FFU VAL : 0x000000BCU - // .. .. reg_phy_wr_data_slave_force = 0x0 - // .. .. ==> 0XF8006180[10:10] = 0x00000000U - // .. .. ==> MASK : 0x00000400U VAL : 0x00000000U - // .. .. reg_phy_wr_data_slave_delay = 0x0 - // .. .. ==> 0XF8006180[19:11] = 0x00000000U - // .. .. ==> MASK : 0x000FF800U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006180, 0x000FFFFFU ,0x000000BCU), - // .. .. reg_phy_wr_data_slave_ratio = 0xc7 - // .. .. ==> 0XF8006184[9:0] = 0x000000C7U - // .. .. ==> MASK : 0x000003FFU VAL : 0x000000C7U - // .. .. reg_phy_wr_data_slave_force = 0x0 - // .. .. ==> 0XF8006184[10:10] = 0x00000000U - // .. .. ==> MASK : 0x00000400U VAL : 0x00000000U - // .. .. reg_phy_wr_data_slave_delay = 0x0 - // .. .. ==> 0XF8006184[19:11] = 0x00000000U - // .. .. ==> MASK : 0x000FF800U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006184, 0x000FFFFFU ,0x000000C7U), - // .. .. reg_phy_wr_data_slave_ratio = 0xc7 - // .. .. ==> 0XF8006188[9:0] = 0x000000C7U - // .. .. ==> MASK : 0x000003FFU VAL : 0x000000C7U - // .. .. reg_phy_wr_data_slave_force = 0x0 - // .. .. ==> 0XF8006188[10:10] = 0x00000000U - // .. .. ==> MASK : 0x00000400U VAL : 0x00000000U - // .. .. reg_phy_wr_data_slave_delay = 0x0 - // .. .. ==> 0XF8006188[19:11] = 0x00000000U - // .. .. ==> MASK : 0x000FF800U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006188, 0x000FFFFFU ,0x000000C7U), - // .. .. reg_phy_loopback = 0x0 - // .. .. ==> 0XF8006190[0:0] = 0x00000000U - // .. .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. .. reg_phy_bl2 = 0x0 - // .. .. ==> 0XF8006190[1:1] = 0x00000000U - // .. .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. .. reg_phy_at_spd_atpg = 0x0 - // .. .. ==> 0XF8006190[2:2] = 0x00000000U - // .. .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. .. reg_phy_bist_enable = 0x0 - // .. .. ==> 0XF8006190[3:3] = 0x00000000U - // .. .. ==> MASK : 0x00000008U VAL : 0x00000000U - // .. .. reg_phy_bist_force_err = 0x0 - // .. .. ==> 0XF8006190[4:4] = 0x00000000U - // .. .. ==> MASK : 0x00000010U VAL : 0x00000000U - // .. .. reg_phy_bist_mode = 0x0 - // .. .. ==> 0XF8006190[6:5] = 0x00000000U - // .. .. ==> MASK : 0x00000060U VAL : 0x00000000U - // .. .. reg_phy_invert_clkout = 0x1 - // .. .. ==> 0XF8006190[7:7] = 0x00000001U - // .. .. ==> MASK : 0x00000080U VAL : 0x00000080U - // .. .. reg_phy_all_dq_mpr_rd_resp = 0x0 - // .. .. ==> 0XF8006190[8:8] = 0x00000000U - // .. .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. .. reg_phy_sel_logic = 0x0 - // .. .. ==> 0XF8006190[9:9] = 0x00000000U - // .. .. ==> MASK : 0x00000200U VAL : 0x00000000U - // .. .. reg_phy_ctrl_slave_ratio = 0x100 - // .. .. ==> 0XF8006190[19:10] = 0x00000100U - // .. .. ==> MASK : 0x000FFC00U VAL : 0x00040000U - // .. .. reg_phy_ctrl_slave_force = 0x0 - // .. .. ==> 0XF8006190[20:20] = 0x00000000U - // .. .. ==> MASK : 0x00100000U VAL : 0x00000000U - // .. .. reg_phy_ctrl_slave_delay = 0x0 - // .. .. ==> 0XF8006190[27:21] = 0x00000000U - // .. .. ==> MASK : 0x0FE00000U VAL : 0x00000000U - // .. .. reg_phy_use_rank0_delays = 0x1 - // .. .. ==> 0XF8006190[28:28] = 0x00000001U - // .. .. ==> MASK : 0x10000000U VAL : 0x10000000U - // .. .. reg_phy_lpddr = 0x0 - // .. .. ==> 0XF8006190[29:29] = 0x00000000U - // .. .. ==> MASK : 0x20000000U VAL : 0x00000000U - // .. .. reg_phy_cmd_latency = 0x0 - // .. .. ==> 0XF8006190[30:30] = 0x00000000U - // .. .. ==> MASK : 0x40000000U VAL : 0x00000000U - // .. .. reg_phy_int_lpbk = 0x0 - // .. .. ==> 0XF8006190[31:31] = 0x00000000U - // .. .. ==> MASK : 0x80000000U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006190, 0xFFFFFFFFU ,0x10040080U), - // .. .. reg_phy_wr_rl_delay = 0x2 - // .. .. ==> 0XF8006194[4:0] = 0x00000002U - // .. .. ==> MASK : 0x0000001FU VAL : 0x00000002U - // .. .. reg_phy_rd_rl_delay = 0x4 - // .. .. ==> 0XF8006194[9:5] = 0x00000004U - // .. .. ==> MASK : 0x000003E0U VAL : 0x00000080U - // .. .. reg_phy_dll_lock_diff = 0xf - // .. .. ==> 0XF8006194[13:10] = 0x0000000FU - // .. .. ==> MASK : 0x00003C00U VAL : 0x00003C00U - // .. .. reg_phy_use_wr_level = 0x1 - // .. .. ==> 0XF8006194[14:14] = 0x00000001U - // .. .. ==> MASK : 0x00004000U VAL : 0x00004000U - // .. .. reg_phy_use_rd_dqs_gate_level = 0x1 - // .. .. ==> 0XF8006194[15:15] = 0x00000001U - // .. .. ==> MASK : 0x00008000U VAL : 0x00008000U - // .. .. reg_phy_use_rd_data_eye_level = 0x1 - // .. .. ==> 0XF8006194[16:16] = 0x00000001U - // .. .. ==> MASK : 0x00010000U VAL : 0x00010000U - // .. .. reg_phy_dis_calib_rst = 0x0 - // .. .. ==> 0XF8006194[17:17] = 0x00000000U - // .. .. ==> MASK : 0x00020000U VAL : 0x00000000U - // .. .. reg_phy_ctrl_slave_delay = 0x0 - // .. .. ==> 0XF8006194[19:18] = 0x00000000U - // .. .. ==> MASK : 0x000C0000U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006194, 0x000FFFFFU ,0x0001FC82U), - // .. .. reg_arb_page_addr_mask = 0x0 - // .. .. ==> 0XF8006204[31:0] = 0x00000000U - // .. .. ==> MASK : 0xFFFFFFFFU VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006204, 0xFFFFFFFFU ,0x00000000U), - // .. .. reg_arb_pri_wr_portn = 0x3ff - // .. .. ==> 0XF8006208[9:0] = 0x000003FFU - // .. .. ==> MASK : 0x000003FFU VAL : 0x000003FFU - // .. .. reg_arb_disable_aging_wr_portn = 0x0 - // .. .. ==> 0XF8006208[16:16] = 0x00000000U - // .. .. ==> MASK : 0x00010000U VAL : 0x00000000U - // .. .. reg_arb_disable_urgent_wr_portn = 0x0 - // .. .. ==> 0XF8006208[17:17] = 0x00000000U - // .. .. ==> MASK : 0x00020000U VAL : 0x00000000U - // .. .. reg_arb_dis_page_match_wr_portn = 0x0 - // .. .. ==> 0XF8006208[18:18] = 0x00000000U - // .. .. ==> MASK : 0x00040000U VAL : 0x00000000U - // .. .. reg_arb_dis_rmw_portn = 0x1 - // .. .. ==> 0XF8006208[19:19] = 0x00000001U - // .. .. ==> MASK : 0x00080000U VAL : 0x00080000U - // .. .. - EMIT_MASKWRITE(0XF8006208, 0x000F03FFU ,0x000803FFU), - // .. .. reg_arb_pri_wr_portn = 0x3ff - // .. .. ==> 0XF800620C[9:0] = 0x000003FFU - // .. .. ==> MASK : 0x000003FFU VAL : 0x000003FFU - // .. .. reg_arb_disable_aging_wr_portn = 0x0 - // .. .. ==> 0XF800620C[16:16] = 0x00000000U - // .. .. ==> MASK : 0x00010000U VAL : 0x00000000U - // .. .. reg_arb_disable_urgent_wr_portn = 0x0 - // .. .. ==> 0XF800620C[17:17] = 0x00000000U - // .. .. ==> MASK : 0x00020000U VAL : 0x00000000U - // .. .. reg_arb_dis_page_match_wr_portn = 0x0 - // .. .. ==> 0XF800620C[18:18] = 0x00000000U - // .. .. ==> MASK : 0x00040000U VAL : 0x00000000U - // .. .. reg_arb_dis_rmw_portn = 0x1 - // .. .. ==> 0XF800620C[19:19] = 0x00000001U - // .. .. ==> MASK : 0x00080000U VAL : 0x00080000U - // .. .. - EMIT_MASKWRITE(0XF800620C, 0x000F03FFU ,0x000803FFU), - // .. .. reg_arb_pri_wr_portn = 0x3ff - // .. .. ==> 0XF8006210[9:0] = 0x000003FFU - // .. .. ==> MASK : 0x000003FFU VAL : 0x000003FFU - // .. .. reg_arb_disable_aging_wr_portn = 0x0 - // .. .. ==> 0XF8006210[16:16] = 0x00000000U - // .. .. ==> MASK : 0x00010000U VAL : 0x00000000U - // .. .. reg_arb_disable_urgent_wr_portn = 0x0 - // .. .. ==> 0XF8006210[17:17] = 0x00000000U - // .. .. ==> MASK : 0x00020000U VAL : 0x00000000U - // .. .. reg_arb_dis_page_match_wr_portn = 0x0 - // .. .. ==> 0XF8006210[18:18] = 0x00000000U - // .. .. ==> MASK : 0x00040000U VAL : 0x00000000U - // .. .. reg_arb_dis_rmw_portn = 0x1 - // .. .. ==> 0XF8006210[19:19] = 0x00000001U - // .. .. ==> MASK : 0x00080000U VAL : 0x00080000U - // .. .. - EMIT_MASKWRITE(0XF8006210, 0x000F03FFU ,0x000803FFU), - // .. .. reg_arb_pri_wr_portn = 0x3ff - // .. .. ==> 0XF8006214[9:0] = 0x000003FFU - // .. .. ==> MASK : 0x000003FFU VAL : 0x000003FFU - // .. .. reg_arb_disable_aging_wr_portn = 0x0 - // .. .. ==> 0XF8006214[16:16] = 0x00000000U - // .. .. ==> MASK : 0x00010000U VAL : 0x00000000U - // .. .. reg_arb_disable_urgent_wr_portn = 0x0 - // .. .. ==> 0XF8006214[17:17] = 0x00000000U - // .. .. ==> MASK : 0x00020000U VAL : 0x00000000U - // .. .. reg_arb_dis_page_match_wr_portn = 0x0 - // .. .. ==> 0XF8006214[18:18] = 0x00000000U - // .. .. ==> MASK : 0x00040000U VAL : 0x00000000U - // .. .. reg_arb_dis_rmw_portn = 0x1 - // .. .. ==> 0XF8006214[19:19] = 0x00000001U - // .. .. ==> MASK : 0x00080000U VAL : 0x00080000U - // .. .. - EMIT_MASKWRITE(0XF8006214, 0x000F03FFU ,0x000803FFU), - // .. .. reg_arb_pri_rd_portn = 0x3ff - // .. .. ==> 0XF8006218[9:0] = 0x000003FFU - // .. .. ==> MASK : 0x000003FFU VAL : 0x000003FFU - // .. .. reg_arb_disable_aging_rd_portn = 0x0 - // .. .. ==> 0XF8006218[16:16] = 0x00000000U - // .. .. ==> MASK : 0x00010000U VAL : 0x00000000U - // .. .. reg_arb_disable_urgent_rd_portn = 0x0 - // .. .. ==> 0XF8006218[17:17] = 0x00000000U - // .. .. ==> MASK : 0x00020000U VAL : 0x00000000U - // .. .. reg_arb_dis_page_match_rd_portn = 0x0 - // .. .. ==> 0XF8006218[18:18] = 0x00000000U - // .. .. ==> MASK : 0x00040000U VAL : 0x00000000U - // .. .. reg_arb_set_hpr_rd_portn = 0x0 - // .. .. ==> 0XF8006218[19:19] = 0x00000000U - // .. .. ==> MASK : 0x00080000U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006218, 0x000F03FFU ,0x000003FFU), - // .. .. reg_arb_pri_rd_portn = 0x3ff - // .. .. ==> 0XF800621C[9:0] = 0x000003FFU - // .. .. ==> MASK : 0x000003FFU VAL : 0x000003FFU - // .. .. reg_arb_disable_aging_rd_portn = 0x0 - // .. .. ==> 0XF800621C[16:16] = 0x00000000U - // .. .. ==> MASK : 0x00010000U VAL : 0x00000000U - // .. .. reg_arb_disable_urgent_rd_portn = 0x0 - // .. .. ==> 0XF800621C[17:17] = 0x00000000U - // .. .. ==> MASK : 0x00020000U VAL : 0x00000000U - // .. .. reg_arb_dis_page_match_rd_portn = 0x0 - // .. .. ==> 0XF800621C[18:18] = 0x00000000U - // .. .. ==> MASK : 0x00040000U VAL : 0x00000000U - // .. .. reg_arb_set_hpr_rd_portn = 0x0 - // .. .. ==> 0XF800621C[19:19] = 0x00000000U - // .. .. ==> MASK : 0x00080000U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF800621C, 0x000F03FFU ,0x000003FFU), - // .. .. reg_arb_pri_rd_portn = 0x3ff - // .. .. ==> 0XF8006220[9:0] = 0x000003FFU - // .. .. ==> MASK : 0x000003FFU VAL : 0x000003FFU - // .. .. reg_arb_disable_aging_rd_portn = 0x0 - // .. .. ==> 0XF8006220[16:16] = 0x00000000U - // .. .. ==> MASK : 0x00010000U VAL : 0x00000000U - // .. .. reg_arb_disable_urgent_rd_portn = 0x0 - // .. .. ==> 0XF8006220[17:17] = 0x00000000U - // .. .. ==> MASK : 0x00020000U VAL : 0x00000000U - // .. .. reg_arb_dis_page_match_rd_portn = 0x0 - // .. .. ==> 0XF8006220[18:18] = 0x00000000U - // .. .. ==> MASK : 0x00040000U VAL : 0x00000000U - // .. .. reg_arb_set_hpr_rd_portn = 0x0 - // .. .. ==> 0XF8006220[19:19] = 0x00000000U - // .. .. ==> MASK : 0x00080000U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006220, 0x000F03FFU ,0x000003FFU), - // .. .. reg_arb_pri_rd_portn = 0x3ff - // .. .. ==> 0XF8006224[9:0] = 0x000003FFU - // .. .. ==> MASK : 0x000003FFU VAL : 0x000003FFU - // .. .. reg_arb_disable_aging_rd_portn = 0x0 - // .. .. ==> 0XF8006224[16:16] = 0x00000000U - // .. .. ==> MASK : 0x00010000U VAL : 0x00000000U - // .. .. reg_arb_disable_urgent_rd_portn = 0x0 - // .. .. ==> 0XF8006224[17:17] = 0x00000000U - // .. .. ==> MASK : 0x00020000U VAL : 0x00000000U - // .. .. reg_arb_dis_page_match_rd_portn = 0x0 - // .. .. ==> 0XF8006224[18:18] = 0x00000000U - // .. .. ==> MASK : 0x00040000U VAL : 0x00000000U - // .. .. reg_arb_set_hpr_rd_portn = 0x0 - // .. .. ==> 0XF8006224[19:19] = 0x00000000U - // .. .. ==> MASK : 0x00080000U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006224, 0x000F03FFU ,0x000003FFU), - // .. .. reg_ddrc_lpddr2 = 0x0 - // .. .. ==> 0XF80062A8[0:0] = 0x00000000U - // .. .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. .. reg_ddrc_per_bank_refresh = 0x0 - // .. .. ==> 0XF80062A8[1:1] = 0x00000000U - // .. .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. .. reg_ddrc_derate_enable = 0x0 - // .. .. ==> 0XF80062A8[2:2] = 0x00000000U - // .. .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. .. reg_ddrc_mr4_margin = 0x0 - // .. .. ==> 0XF80062A8[11:4] = 0x00000000U - // .. .. ==> MASK : 0x00000FF0U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF80062A8, 0x00000FF7U ,0x00000000U), - // .. .. reg_ddrc_mr4_read_interval = 0x0 - // .. .. ==> 0XF80062AC[31:0] = 0x00000000U - // .. .. ==> MASK : 0xFFFFFFFFU VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF80062AC, 0xFFFFFFFFU ,0x00000000U), - // .. .. reg_ddrc_min_stable_clock_x1 = 0x5 - // .. .. ==> 0XF80062B0[3:0] = 0x00000005U - // .. .. ==> MASK : 0x0000000FU VAL : 0x00000005U - // .. .. reg_ddrc_idle_after_reset_x32 = 0x12 - // .. .. ==> 0XF80062B0[11:4] = 0x00000012U - // .. .. ==> MASK : 0x00000FF0U VAL : 0x00000120U - // .. .. reg_ddrc_t_mrw = 0x5 - // .. .. ==> 0XF80062B0[21:12] = 0x00000005U - // .. .. ==> MASK : 0x003FF000U VAL : 0x00005000U - // .. .. - EMIT_MASKWRITE(0XF80062B0, 0x003FFFFFU ,0x00005125U), - // .. .. reg_ddrc_max_auto_init_x1024 = 0xa8 - // .. .. ==> 0XF80062B4[7:0] = 0x000000A8U - // .. .. ==> MASK : 0x000000FFU VAL : 0x000000A8U - // .. .. reg_ddrc_dev_zqinit_x32 = 0x12 - // .. .. ==> 0XF80062B4[17:8] = 0x00000012U - // .. .. ==> MASK : 0x0003FF00U VAL : 0x00001200U - // .. .. - EMIT_MASKWRITE(0XF80062B4, 0x0003FFFFU ,0x000012A8U), - // .. .. START: POLL ON DCI STATUS - // .. .. DONE = 1 - // .. .. ==> 0XF8000B74[13:13] = 0x00000001U - // .. .. ==> MASK : 0x00002000U VAL : 0x00002000U - // .. .. - EMIT_MASKPOLL(0XF8000B74, 0x00002000U), - // .. .. FINISH: POLL ON DCI STATUS - // .. .. START: UNLOCK DDR - // .. .. reg_ddrc_soft_rstb = 0x1 - // .. .. ==> 0XF8006000[0:0] = 0x00000001U - // .. .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. .. reg_ddrc_powerdown_en = 0x0 - // .. .. ==> 0XF8006000[1:1] = 0x00000000U - // .. .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. .. reg_ddrc_data_bus_width = 0x0 - // .. .. ==> 0XF8006000[3:2] = 0x00000000U - // .. .. ==> MASK : 0x0000000CU VAL : 0x00000000U - // .. .. reg_ddrc_burst8_refresh = 0x0 - // .. .. ==> 0XF8006000[6:4] = 0x00000000U - // .. .. ==> MASK : 0x00000070U VAL : 0x00000000U - // .. .. reg_ddrc_rdwr_idle_gap = 1 - // .. .. ==> 0XF8006000[13:7] = 0x00000001U - // .. .. ==> MASK : 0x00003F80U VAL : 0x00000080U - // .. .. reg_ddrc_dis_rd_bypass = 0x0 - // .. .. ==> 0XF8006000[14:14] = 0x00000000U - // .. .. ==> MASK : 0x00004000U VAL : 0x00000000U - // .. .. reg_ddrc_dis_act_bypass = 0x0 - // .. .. ==> 0XF8006000[15:15] = 0x00000000U - // .. .. ==> MASK : 0x00008000U VAL : 0x00000000U - // .. .. reg_ddrc_dis_auto_refresh = 0x0 - // .. .. ==> 0XF8006000[16:16] = 0x00000000U - // .. .. ==> MASK : 0x00010000U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006000, 0x0001FFFFU ,0x00000081U), - // .. .. FINISH: UNLOCK DDR - // .. .. START: CHECK DDR STATUS - // .. .. ddrc_reg_operating_mode = 1 - // .. .. ==> 0XF8006054[2:0] = 0x00000001U - // .. .. ==> MASK : 0x00000007U VAL : 0x00000001U - // .. .. - EMIT_MASKPOLL(0XF8006054, 0x00000007U), - // .. .. FINISH: CHECK DDR STATUS - // .. FINISH: DDR INITIALIZATION - // FINISH: top - // - EMIT_EXIT(), - - // -}; - -unsigned long ps7_mio_init_data_2_0[] = { - // START: top - // .. START: SLCR SETTINGS - // .. UNLOCK_KEY = 0XDF0D - // .. ==> 0XF8000008[15:0] = 0x0000DF0DU - // .. ==> MASK : 0x0000FFFFU VAL : 0x0000DF0DU - // .. - EMIT_MASKWRITE(0XF8000008, 0x0000FFFFU ,0x0000DF0DU), - // .. FINISH: SLCR SETTINGS - // .. START: OCM REMAPPING - // .. FINISH: OCM REMAPPING - // .. START: DDRIOB SETTINGS - // .. INP_POWER = 0x0 - // .. ==> 0XF8000B40[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. INP_TYPE = 0x0 - // .. ==> 0XF8000B40[2:1] = 0x00000000U - // .. ==> MASK : 0x00000006U VAL : 0x00000000U - // .. DCI_UPDATE = 0x0 - // .. ==> 0XF8000B40[3:3] = 0x00000000U - // .. ==> MASK : 0x00000008U VAL : 0x00000000U - // .. TERM_EN = 0x0 - // .. ==> 0XF8000B40[4:4] = 0x00000000U - // .. ==> MASK : 0x00000010U VAL : 0x00000000U - // .. DCR_TYPE = 0x0 - // .. ==> 0XF8000B40[6:5] = 0x00000000U - // .. ==> MASK : 0x00000060U VAL : 0x00000000U - // .. IBUF_DISABLE_MODE = 0x0 - // .. ==> 0XF8000B40[7:7] = 0x00000000U - // .. ==> MASK : 0x00000080U VAL : 0x00000000U - // .. TERM_DISABLE_MODE = 0x0 - // .. ==> 0XF8000B40[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. OUTPUT_EN = 0x3 - // .. ==> 0XF8000B40[10:9] = 0x00000003U - // .. ==> MASK : 0x00000600U VAL : 0x00000600U - // .. PULLUP_EN = 0x0 - // .. ==> 0XF8000B40[11:11] = 0x00000000U - // .. ==> MASK : 0x00000800U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000B40, 0x00000FFFU ,0x00000600U), - // .. INP_POWER = 0x0 - // .. ==> 0XF8000B44[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. INP_TYPE = 0x0 - // .. ==> 0XF8000B44[2:1] = 0x00000000U - // .. ==> MASK : 0x00000006U VAL : 0x00000000U - // .. DCI_UPDATE = 0x0 - // .. ==> 0XF8000B44[3:3] = 0x00000000U - // .. ==> MASK : 0x00000008U VAL : 0x00000000U - // .. TERM_EN = 0x0 - // .. ==> 0XF8000B44[4:4] = 0x00000000U - // .. ==> MASK : 0x00000010U VAL : 0x00000000U - // .. DCR_TYPE = 0x0 - // .. ==> 0XF8000B44[6:5] = 0x00000000U - // .. ==> MASK : 0x00000060U VAL : 0x00000000U - // .. IBUF_DISABLE_MODE = 0x0 - // .. ==> 0XF8000B44[7:7] = 0x00000000U - // .. ==> MASK : 0x00000080U VAL : 0x00000000U - // .. TERM_DISABLE_MODE = 0x0 - // .. ==> 0XF8000B44[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. OUTPUT_EN = 0x3 - // .. ==> 0XF8000B44[10:9] = 0x00000003U - // .. ==> MASK : 0x00000600U VAL : 0x00000600U - // .. PULLUP_EN = 0x0 - // .. ==> 0XF8000B44[11:11] = 0x00000000U - // .. ==> MASK : 0x00000800U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000B44, 0x00000FFFU ,0x00000600U), - // .. INP_POWER = 0x0 - // .. ==> 0XF8000B48[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. INP_TYPE = 0x1 - // .. ==> 0XF8000B48[2:1] = 0x00000001U - // .. ==> MASK : 0x00000006U VAL : 0x00000002U - // .. DCI_UPDATE = 0x0 - // .. ==> 0XF8000B48[3:3] = 0x00000000U - // .. ==> MASK : 0x00000008U VAL : 0x00000000U - // .. TERM_EN = 0x1 - // .. ==> 0XF8000B48[4:4] = 0x00000001U - // .. ==> MASK : 0x00000010U VAL : 0x00000010U - // .. DCR_TYPE = 0x3 - // .. ==> 0XF8000B48[6:5] = 0x00000003U - // .. ==> MASK : 0x00000060U VAL : 0x00000060U - // .. IBUF_DISABLE_MODE = 0 - // .. ==> 0XF8000B48[7:7] = 0x00000000U - // .. ==> MASK : 0x00000080U VAL : 0x00000000U - // .. TERM_DISABLE_MODE = 0 - // .. ==> 0XF8000B48[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. OUTPUT_EN = 0x3 - // .. ==> 0XF8000B48[10:9] = 0x00000003U - // .. ==> MASK : 0x00000600U VAL : 0x00000600U - // .. PULLUP_EN = 0x0 - // .. ==> 0XF8000B48[11:11] = 0x00000000U - // .. ==> MASK : 0x00000800U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000B48, 0x00000FFFU ,0x00000672U), - // .. INP_POWER = 0x0 - // .. ==> 0XF8000B4C[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. INP_TYPE = 0x1 - // .. ==> 0XF8000B4C[2:1] = 0x00000001U - // .. ==> MASK : 0x00000006U VAL : 0x00000002U - // .. DCI_UPDATE = 0x0 - // .. ==> 0XF8000B4C[3:3] = 0x00000000U - // .. ==> MASK : 0x00000008U VAL : 0x00000000U - // .. TERM_EN = 0x1 - // .. ==> 0XF8000B4C[4:4] = 0x00000001U - // .. ==> MASK : 0x00000010U VAL : 0x00000010U - // .. DCR_TYPE = 0x3 - // .. ==> 0XF8000B4C[6:5] = 0x00000003U - // .. ==> MASK : 0x00000060U VAL : 0x00000060U - // .. IBUF_DISABLE_MODE = 0 - // .. ==> 0XF8000B4C[7:7] = 0x00000000U - // .. ==> MASK : 0x00000080U VAL : 0x00000000U - // .. TERM_DISABLE_MODE = 0 - // .. ==> 0XF8000B4C[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. OUTPUT_EN = 0x3 - // .. ==> 0XF8000B4C[10:9] = 0x00000003U - // .. ==> MASK : 0x00000600U VAL : 0x00000600U - // .. PULLUP_EN = 0x0 - // .. ==> 0XF8000B4C[11:11] = 0x00000000U - // .. ==> MASK : 0x00000800U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000B4C, 0x00000FFFU ,0x00000672U), - // .. INP_POWER = 0x0 - // .. ==> 0XF8000B50[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. INP_TYPE = 0x2 - // .. ==> 0XF8000B50[2:1] = 0x00000002U - // .. ==> MASK : 0x00000006U VAL : 0x00000004U - // .. DCI_UPDATE = 0x0 - // .. ==> 0XF8000B50[3:3] = 0x00000000U - // .. ==> MASK : 0x00000008U VAL : 0x00000000U - // .. TERM_EN = 0x1 - // .. ==> 0XF8000B50[4:4] = 0x00000001U - // .. ==> MASK : 0x00000010U VAL : 0x00000010U - // .. DCR_TYPE = 0x3 - // .. ==> 0XF8000B50[6:5] = 0x00000003U - // .. ==> MASK : 0x00000060U VAL : 0x00000060U - // .. IBUF_DISABLE_MODE = 0 - // .. ==> 0XF8000B50[7:7] = 0x00000000U - // .. ==> MASK : 0x00000080U VAL : 0x00000000U - // .. TERM_DISABLE_MODE = 0 - // .. ==> 0XF8000B50[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. OUTPUT_EN = 0x3 - // .. ==> 0XF8000B50[10:9] = 0x00000003U - // .. ==> MASK : 0x00000600U VAL : 0x00000600U - // .. PULLUP_EN = 0x0 - // .. ==> 0XF8000B50[11:11] = 0x00000000U - // .. ==> MASK : 0x00000800U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000B50, 0x00000FFFU ,0x00000674U), - // .. INP_POWER = 0x0 - // .. ==> 0XF8000B54[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. INP_TYPE = 0x2 - // .. ==> 0XF8000B54[2:1] = 0x00000002U - // .. ==> MASK : 0x00000006U VAL : 0x00000004U - // .. DCI_UPDATE = 0x0 - // .. ==> 0XF8000B54[3:3] = 0x00000000U - // .. ==> MASK : 0x00000008U VAL : 0x00000000U - // .. TERM_EN = 0x1 - // .. ==> 0XF8000B54[4:4] = 0x00000001U - // .. ==> MASK : 0x00000010U VAL : 0x00000010U - // .. DCR_TYPE = 0x3 - // .. ==> 0XF8000B54[6:5] = 0x00000003U - // .. ==> MASK : 0x00000060U VAL : 0x00000060U - // .. IBUF_DISABLE_MODE = 0 - // .. ==> 0XF8000B54[7:7] = 0x00000000U - // .. ==> MASK : 0x00000080U VAL : 0x00000000U - // .. TERM_DISABLE_MODE = 0 - // .. ==> 0XF8000B54[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. OUTPUT_EN = 0x3 - // .. ==> 0XF8000B54[10:9] = 0x00000003U - // .. ==> MASK : 0x00000600U VAL : 0x00000600U - // .. PULLUP_EN = 0x0 - // .. ==> 0XF8000B54[11:11] = 0x00000000U - // .. ==> MASK : 0x00000800U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000B54, 0x00000FFFU ,0x00000674U), - // .. INP_POWER = 0x0 - // .. ==> 0XF8000B58[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. INP_TYPE = 0x0 - // .. ==> 0XF8000B58[2:1] = 0x00000000U - // .. ==> MASK : 0x00000006U VAL : 0x00000000U - // .. DCI_UPDATE = 0x0 - // .. ==> 0XF8000B58[3:3] = 0x00000000U - // .. ==> MASK : 0x00000008U VAL : 0x00000000U - // .. TERM_EN = 0x0 - // .. ==> 0XF8000B58[4:4] = 0x00000000U - // .. ==> MASK : 0x00000010U VAL : 0x00000000U - // .. DCR_TYPE = 0x0 - // .. ==> 0XF8000B58[6:5] = 0x00000000U - // .. ==> MASK : 0x00000060U VAL : 0x00000000U - // .. IBUF_DISABLE_MODE = 0x0 - // .. ==> 0XF8000B58[7:7] = 0x00000000U - // .. ==> MASK : 0x00000080U VAL : 0x00000000U - // .. TERM_DISABLE_MODE = 0x0 - // .. ==> 0XF8000B58[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. OUTPUT_EN = 0x3 - // .. ==> 0XF8000B58[10:9] = 0x00000003U - // .. ==> MASK : 0x00000600U VAL : 0x00000600U - // .. PULLUP_EN = 0x0 - // .. ==> 0XF8000B58[11:11] = 0x00000000U - // .. ==> MASK : 0x00000800U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000B58, 0x00000FFFU ,0x00000600U), - // .. DRIVE_P = 0x1c - // .. ==> 0XF8000B5C[6:0] = 0x0000001CU - // .. ==> MASK : 0x0000007FU VAL : 0x0000001CU - // .. DRIVE_N = 0xc - // .. ==> 0XF8000B5C[13:7] = 0x0000000CU - // .. ==> MASK : 0x00003F80U VAL : 0x00000600U - // .. SLEW_P = 0x3 - // .. ==> 0XF8000B5C[18:14] = 0x00000003U - // .. ==> MASK : 0x0007C000U VAL : 0x0000C000U - // .. SLEW_N = 0x3 - // .. ==> 0XF8000B5C[23:19] = 0x00000003U - // .. ==> MASK : 0x00F80000U VAL : 0x00180000U - // .. GTL = 0x0 - // .. ==> 0XF8000B5C[26:24] = 0x00000000U - // .. ==> MASK : 0x07000000U VAL : 0x00000000U - // .. RTERM = 0x0 - // .. ==> 0XF8000B5C[31:27] = 0x00000000U - // .. ==> MASK : 0xF8000000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000B5C, 0xFFFFFFFFU ,0x0018C61CU), - // .. DRIVE_P = 0x1c - // .. ==> 0XF8000B60[6:0] = 0x0000001CU - // .. ==> MASK : 0x0000007FU VAL : 0x0000001CU - // .. DRIVE_N = 0xc - // .. ==> 0XF8000B60[13:7] = 0x0000000CU - // .. ==> MASK : 0x00003F80U VAL : 0x00000600U - // .. SLEW_P = 0x6 - // .. ==> 0XF8000B60[18:14] = 0x00000006U - // .. ==> MASK : 0x0007C000U VAL : 0x00018000U - // .. SLEW_N = 0x1f - // .. ==> 0XF8000B60[23:19] = 0x0000001FU - // .. ==> MASK : 0x00F80000U VAL : 0x00F80000U - // .. GTL = 0x0 - // .. ==> 0XF8000B60[26:24] = 0x00000000U - // .. ==> MASK : 0x07000000U VAL : 0x00000000U - // .. RTERM = 0x0 - // .. ==> 0XF8000B60[31:27] = 0x00000000U - // .. ==> MASK : 0xF8000000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000B60, 0xFFFFFFFFU ,0x00F9861CU), - // .. DRIVE_P = 0x1c - // .. ==> 0XF8000B64[6:0] = 0x0000001CU - // .. ==> MASK : 0x0000007FU VAL : 0x0000001CU - // .. DRIVE_N = 0xc - // .. ==> 0XF8000B64[13:7] = 0x0000000CU - // .. ==> MASK : 0x00003F80U VAL : 0x00000600U - // .. SLEW_P = 0x6 - // .. ==> 0XF8000B64[18:14] = 0x00000006U - // .. ==> MASK : 0x0007C000U VAL : 0x00018000U - // .. SLEW_N = 0x1f - // .. ==> 0XF8000B64[23:19] = 0x0000001FU - // .. ==> MASK : 0x00F80000U VAL : 0x00F80000U - // .. GTL = 0x0 - // .. ==> 0XF8000B64[26:24] = 0x00000000U - // .. ==> MASK : 0x07000000U VAL : 0x00000000U - // .. RTERM = 0x0 - // .. ==> 0XF8000B64[31:27] = 0x00000000U - // .. ==> MASK : 0xF8000000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000B64, 0xFFFFFFFFU ,0x00F9861CU), - // .. DRIVE_P = 0x1c - // .. ==> 0XF8000B68[6:0] = 0x0000001CU - // .. ==> MASK : 0x0000007FU VAL : 0x0000001CU - // .. DRIVE_N = 0xc - // .. ==> 0XF8000B68[13:7] = 0x0000000CU - // .. ==> MASK : 0x00003F80U VAL : 0x00000600U - // .. SLEW_P = 0x6 - // .. ==> 0XF8000B68[18:14] = 0x00000006U - // .. ==> MASK : 0x0007C000U VAL : 0x00018000U - // .. SLEW_N = 0x1f - // .. ==> 0XF8000B68[23:19] = 0x0000001FU - // .. ==> MASK : 0x00F80000U VAL : 0x00F80000U - // .. GTL = 0x0 - // .. ==> 0XF8000B68[26:24] = 0x00000000U - // .. ==> MASK : 0x07000000U VAL : 0x00000000U - // .. RTERM = 0x0 - // .. ==> 0XF8000B68[31:27] = 0x00000000U - // .. ==> MASK : 0xF8000000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000B68, 0xFFFFFFFFU ,0x00F9861CU), - // .. VREF_INT_EN = 0x1 - // .. ==> 0XF8000B6C[0:0] = 0x00000001U - // .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. VREF_SEL = 0x4 - // .. ==> 0XF8000B6C[4:1] = 0x00000004U - // .. ==> MASK : 0x0000001EU VAL : 0x00000008U - // .. VREF_EXT_EN = 0x0 - // .. ==> 0XF8000B6C[6:5] = 0x00000000U - // .. ==> MASK : 0x00000060U VAL : 0x00000000U - // .. VREF_PULLUP_EN = 0x0 - // .. ==> 0XF8000B6C[8:7] = 0x00000000U - // .. ==> MASK : 0x00000180U VAL : 0x00000000U - // .. REFIO_EN = 0x1 - // .. ==> 0XF8000B6C[9:9] = 0x00000001U - // .. ==> MASK : 0x00000200U VAL : 0x00000200U - // .. REFIO_TEST = 0x0 - // .. ==> 0XF8000B6C[11:10] = 0x00000000U - // .. ==> MASK : 0x00000C00U VAL : 0x00000000U - // .. REFIO_PULLUP_EN = 0x0 - // .. ==> 0XF8000B6C[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DRST_B_PULLUP_EN = 0x0 - // .. ==> 0XF8000B6C[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. CKE_PULLUP_EN = 0x0 - // .. ==> 0XF8000B6C[14:14] = 0x00000000U - // .. ==> MASK : 0x00004000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000B6C, 0x00007FFFU ,0x00000209U), - // .. .. START: ASSERT RESET - // .. .. RESET = 1 - // .. .. ==> 0XF8000B70[0:0] = 0x00000001U - // .. .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. .. VRN_OUT = 0x1 - // .. .. ==> 0XF8000B70[5:5] = 0x00000001U - // .. .. ==> MASK : 0x00000020U VAL : 0x00000020U - // .. .. - EMIT_MASKWRITE(0XF8000B70, 0x00000021U ,0x00000021U), - // .. .. FINISH: ASSERT RESET - // .. .. START: DEASSERT RESET - // .. .. RESET = 0 - // .. .. ==> 0XF8000B70[0:0] = 0x00000000U - // .. .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. .. VRN_OUT = 0x1 - // .. .. ==> 0XF8000B70[5:5] = 0x00000001U - // .. .. ==> MASK : 0x00000020U VAL : 0x00000020U - // .. .. - EMIT_MASKWRITE(0XF8000B70, 0x00000021U ,0x00000020U), - // .. .. FINISH: DEASSERT RESET - // .. .. RESET = 0x1 - // .. .. ==> 0XF8000B70[0:0] = 0x00000001U - // .. .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. .. ENABLE = 0x1 - // .. .. ==> 0XF8000B70[1:1] = 0x00000001U - // .. .. ==> MASK : 0x00000002U VAL : 0x00000002U - // .. .. VRP_TRI = 0x0 - // .. .. ==> 0XF8000B70[2:2] = 0x00000000U - // .. .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. .. VRN_TRI = 0x0 - // .. .. ==> 0XF8000B70[3:3] = 0x00000000U - // .. .. ==> MASK : 0x00000008U VAL : 0x00000000U - // .. .. VRP_OUT = 0x0 - // .. .. ==> 0XF8000B70[4:4] = 0x00000000U - // .. .. ==> MASK : 0x00000010U VAL : 0x00000000U - // .. .. VRN_OUT = 0x1 - // .. .. ==> 0XF8000B70[5:5] = 0x00000001U - // .. .. ==> MASK : 0x00000020U VAL : 0x00000020U - // .. .. NREF_OPT1 = 0x0 - // .. .. ==> 0XF8000B70[7:6] = 0x00000000U - // .. .. ==> MASK : 0x000000C0U VAL : 0x00000000U - // .. .. NREF_OPT2 = 0x0 - // .. .. ==> 0XF8000B70[10:8] = 0x00000000U - // .. .. ==> MASK : 0x00000700U VAL : 0x00000000U - // .. .. NREF_OPT4 = 0x1 - // .. .. ==> 0XF8000B70[13:11] = 0x00000001U - // .. .. ==> MASK : 0x00003800U VAL : 0x00000800U - // .. .. PREF_OPT1 = 0x0 - // .. .. ==> 0XF8000B70[16:14] = 0x00000000U - // .. .. ==> MASK : 0x0001C000U VAL : 0x00000000U - // .. .. PREF_OPT2 = 0x0 - // .. .. ==> 0XF8000B70[19:17] = 0x00000000U - // .. .. ==> MASK : 0x000E0000U VAL : 0x00000000U - // .. .. UPDATE_CONTROL = 0x0 - // .. .. ==> 0XF8000B70[20:20] = 0x00000000U - // .. .. ==> MASK : 0x00100000U VAL : 0x00000000U - // .. .. INIT_COMPLETE = 0x0 - // .. .. ==> 0XF8000B70[21:21] = 0x00000000U - // .. .. ==> MASK : 0x00200000U VAL : 0x00000000U - // .. .. TST_CLK = 0x0 - // .. .. ==> 0XF8000B70[22:22] = 0x00000000U - // .. .. ==> MASK : 0x00400000U VAL : 0x00000000U - // .. .. TST_HLN = 0x0 - // .. .. ==> 0XF8000B70[23:23] = 0x00000000U - // .. .. ==> MASK : 0x00800000U VAL : 0x00000000U - // .. .. TST_HLP = 0x0 - // .. .. ==> 0XF8000B70[24:24] = 0x00000000U - // .. .. ==> MASK : 0x01000000U VAL : 0x00000000U - // .. .. TST_RST = 0x0 - // .. .. ==> 0XF8000B70[25:25] = 0x00000000U - // .. .. ==> MASK : 0x02000000U VAL : 0x00000000U - // .. .. INT_DCI_EN = 0x0 - // .. .. ==> 0XF8000B70[26:26] = 0x00000000U - // .. .. ==> MASK : 0x04000000U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8000B70, 0x07FFFFFFU ,0x00000823U), - // .. FINISH: DDRIOB SETTINGS - // .. START: MIO PROGRAMMING - // .. TRI_ENABLE = 0 - // .. ==> 0XF8000700[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF8000700[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 0 - // .. ==> 0XF8000700[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF8000700[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF8000700[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF8000700[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 3 - // .. ==> 0XF8000700[11:9] = 0x00000003U - // .. ==> MASK : 0x00000E00U VAL : 0x00000600U - // .. PULLUP = 0 - // .. ==> 0XF8000700[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000700[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000700, 0x00003FFFU ,0x00000600U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF8000704[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 1 - // .. ==> 0XF8000704[1:1] = 0x00000001U - // .. ==> MASK : 0x00000002U VAL : 0x00000002U - // .. L1_SEL = 0 - // .. ==> 0XF8000704[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF8000704[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF8000704[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF8000704[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 3 - // .. ==> 0XF8000704[11:9] = 0x00000003U - // .. ==> MASK : 0x00000E00U VAL : 0x00000600U - // .. PULLUP = 0 - // .. ==> 0XF8000704[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000704[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000704, 0x00003FFFU ,0x00000602U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF8000708[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 1 - // .. ==> 0XF8000708[1:1] = 0x00000001U - // .. ==> MASK : 0x00000002U VAL : 0x00000002U - // .. L1_SEL = 0 - // .. ==> 0XF8000708[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF8000708[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF8000708[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF8000708[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 3 - // .. ==> 0XF8000708[11:9] = 0x00000003U - // .. ==> MASK : 0x00000E00U VAL : 0x00000600U - // .. PULLUP = 0 - // .. ==> 0XF8000708[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000708[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000708, 0x00003FFFU ,0x00000602U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF800070C[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 1 - // .. ==> 0XF800070C[1:1] = 0x00000001U - // .. ==> MASK : 0x00000002U VAL : 0x00000002U - // .. L1_SEL = 0 - // .. ==> 0XF800070C[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF800070C[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF800070C[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF800070C[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 3 - // .. ==> 0XF800070C[11:9] = 0x00000003U - // .. ==> MASK : 0x00000E00U VAL : 0x00000600U - // .. PULLUP = 0 - // .. ==> 0XF800070C[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF800070C[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF800070C, 0x00003FFFU ,0x00000602U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF8000710[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 1 - // .. ==> 0XF8000710[1:1] = 0x00000001U - // .. ==> MASK : 0x00000002U VAL : 0x00000002U - // .. L1_SEL = 0 - // .. ==> 0XF8000710[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF8000710[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF8000710[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF8000710[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 3 - // .. ==> 0XF8000710[11:9] = 0x00000003U - // .. ==> MASK : 0x00000E00U VAL : 0x00000600U - // .. PULLUP = 0 - // .. ==> 0XF8000710[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000710[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000710, 0x00003FFFU ,0x00000602U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF8000714[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 1 - // .. ==> 0XF8000714[1:1] = 0x00000001U - // .. ==> MASK : 0x00000002U VAL : 0x00000002U - // .. L1_SEL = 0 - // .. ==> 0XF8000714[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF8000714[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF8000714[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF8000714[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 3 - // .. ==> 0XF8000714[11:9] = 0x00000003U - // .. ==> MASK : 0x00000E00U VAL : 0x00000600U - // .. PULLUP = 0 - // .. ==> 0XF8000714[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000714[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000714, 0x00003FFFU ,0x00000602U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF8000718[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 1 - // .. ==> 0XF8000718[1:1] = 0x00000001U - // .. ==> MASK : 0x00000002U VAL : 0x00000002U - // .. L1_SEL = 0 - // .. ==> 0XF8000718[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF8000718[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF8000718[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF8000718[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 3 - // .. ==> 0XF8000718[11:9] = 0x00000003U - // .. ==> MASK : 0x00000E00U VAL : 0x00000600U - // .. PULLUP = 0 - // .. ==> 0XF8000718[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000718[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000718, 0x00003FFFU ,0x00000602U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF800071C[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF800071C[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 0 - // .. ==> 0XF800071C[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF800071C[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF800071C[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF800071C[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 3 - // .. ==> 0XF800071C[11:9] = 0x00000003U - // .. ==> MASK : 0x00000E00U VAL : 0x00000600U - // .. PULLUP = 0 - // .. ==> 0XF800071C[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF800071C[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF800071C, 0x00003FFFU ,0x00000600U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF8000720[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 1 - // .. ==> 0XF8000720[1:1] = 0x00000001U - // .. ==> MASK : 0x00000002U VAL : 0x00000002U - // .. L1_SEL = 0 - // .. ==> 0XF8000720[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF8000720[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF8000720[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF8000720[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 3 - // .. ==> 0XF8000720[11:9] = 0x00000003U - // .. ==> MASK : 0x00000E00U VAL : 0x00000600U - // .. PULLUP = 0 - // .. ==> 0XF8000720[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000720[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000720, 0x00003FFFU ,0x00000602U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF8000724[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF8000724[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 0 - // .. ==> 0XF8000724[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF8000724[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF8000724[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF8000724[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 3 - // .. ==> 0XF8000724[11:9] = 0x00000003U - // .. ==> MASK : 0x00000E00U VAL : 0x00000600U - // .. PULLUP = 0 - // .. ==> 0XF8000724[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000724[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000724, 0x00003FFFU ,0x00000600U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF8000728[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF8000728[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 0 - // .. ==> 0XF8000728[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF8000728[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 4 - // .. ==> 0XF8000728[7:5] = 0x00000004U - // .. ==> MASK : 0x000000E0U VAL : 0x00000080U - // .. Speed = 0 - // .. ==> 0XF8000728[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 3 - // .. ==> 0XF8000728[11:9] = 0x00000003U - // .. ==> MASK : 0x00000E00U VAL : 0x00000600U - // .. PULLUP = 0 - // .. ==> 0XF8000728[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000728[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000728, 0x00003FFFU ,0x00000680U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF800072C[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF800072C[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 0 - // .. ==> 0XF800072C[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF800072C[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 4 - // .. ==> 0XF800072C[7:5] = 0x00000004U - // .. ==> MASK : 0x000000E0U VAL : 0x00000080U - // .. Speed = 0 - // .. ==> 0XF800072C[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 3 - // .. ==> 0XF800072C[11:9] = 0x00000003U - // .. ==> MASK : 0x00000E00U VAL : 0x00000600U - // .. PULLUP = 0 - // .. ==> 0XF800072C[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF800072C[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF800072C, 0x00003FFFU ,0x00000680U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF8000730[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF8000730[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 0 - // .. ==> 0XF8000730[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF8000730[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 4 - // .. ==> 0XF8000730[7:5] = 0x00000004U - // .. ==> MASK : 0x000000E0U VAL : 0x00000080U - // .. Speed = 0 - // .. ==> 0XF8000730[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 3 - // .. ==> 0XF8000730[11:9] = 0x00000003U - // .. ==> MASK : 0x00000E00U VAL : 0x00000600U - // .. PULLUP = 0 - // .. ==> 0XF8000730[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000730[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000730, 0x00003FFFU ,0x00000680U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF8000734[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF8000734[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 0 - // .. ==> 0XF8000734[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF8000734[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 4 - // .. ==> 0XF8000734[7:5] = 0x00000004U - // .. ==> MASK : 0x000000E0U VAL : 0x00000080U - // .. Speed = 0 - // .. ==> 0XF8000734[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 3 - // .. ==> 0XF8000734[11:9] = 0x00000003U - // .. ==> MASK : 0x00000E00U VAL : 0x00000600U - // .. PULLUP = 0 - // .. ==> 0XF8000734[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000734[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000734, 0x00003FFFU ,0x00000680U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF8000738[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF8000738[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 0 - // .. ==> 0XF8000738[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF8000738[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 4 - // .. ==> 0XF8000738[7:5] = 0x00000004U - // .. ==> MASK : 0x000000E0U VAL : 0x00000080U - // .. Speed = 0 - // .. ==> 0XF8000738[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 3 - // .. ==> 0XF8000738[11:9] = 0x00000003U - // .. ==> MASK : 0x00000E00U VAL : 0x00000600U - // .. PULLUP = 0 - // .. ==> 0XF8000738[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000738[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000738, 0x00003FFFU ,0x00000680U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF800073C[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF800073C[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 0 - // .. ==> 0XF800073C[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF800073C[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 4 - // .. ==> 0XF800073C[7:5] = 0x00000004U - // .. ==> MASK : 0x000000E0U VAL : 0x00000080U - // .. Speed = 0 - // .. ==> 0XF800073C[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 3 - // .. ==> 0XF800073C[11:9] = 0x00000003U - // .. ==> MASK : 0x00000E00U VAL : 0x00000600U - // .. PULLUP = 0 - // .. ==> 0XF800073C[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF800073C[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF800073C, 0x00003FFFU ,0x00000680U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF8000740[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 1 - // .. ==> 0XF8000740[1:1] = 0x00000001U - // .. ==> MASK : 0x00000002U VAL : 0x00000002U - // .. L1_SEL = 0 - // .. ==> 0XF8000740[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF8000740[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF8000740[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF8000740[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF8000740[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF8000740[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000740[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000740, 0x00003FFFU ,0x00000202U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF8000744[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 1 - // .. ==> 0XF8000744[1:1] = 0x00000001U - // .. ==> MASK : 0x00000002U VAL : 0x00000002U - // .. L1_SEL = 0 - // .. ==> 0XF8000744[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF8000744[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF8000744[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF8000744[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF8000744[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF8000744[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000744[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000744, 0x00003FFFU ,0x00000202U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF8000748[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 1 - // .. ==> 0XF8000748[1:1] = 0x00000001U - // .. ==> MASK : 0x00000002U VAL : 0x00000002U - // .. L1_SEL = 0 - // .. ==> 0XF8000748[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF8000748[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF8000748[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF8000748[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF8000748[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF8000748[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000748[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000748, 0x00003FFFU ,0x00000202U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF800074C[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 1 - // .. ==> 0XF800074C[1:1] = 0x00000001U - // .. ==> MASK : 0x00000002U VAL : 0x00000002U - // .. L1_SEL = 0 - // .. ==> 0XF800074C[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF800074C[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF800074C[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF800074C[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF800074C[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF800074C[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF800074C[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF800074C, 0x00003FFFU ,0x00000202U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF8000750[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 1 - // .. ==> 0XF8000750[1:1] = 0x00000001U - // .. ==> MASK : 0x00000002U VAL : 0x00000002U - // .. L1_SEL = 0 - // .. ==> 0XF8000750[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF8000750[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF8000750[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF8000750[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF8000750[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF8000750[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000750[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000750, 0x00003FFFU ,0x00000202U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF8000754[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 1 - // .. ==> 0XF8000754[1:1] = 0x00000001U - // .. ==> MASK : 0x00000002U VAL : 0x00000002U - // .. L1_SEL = 0 - // .. ==> 0XF8000754[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF8000754[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF8000754[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF8000754[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF8000754[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF8000754[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000754[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000754, 0x00003FFFU ,0x00000202U), - // .. TRI_ENABLE = 1 - // .. ==> 0XF8000758[0:0] = 0x00000001U - // .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. L0_SEL = 1 - // .. ==> 0XF8000758[1:1] = 0x00000001U - // .. ==> MASK : 0x00000002U VAL : 0x00000002U - // .. L1_SEL = 0 - // .. ==> 0XF8000758[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF8000758[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF8000758[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF8000758[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF8000758[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF8000758[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000758[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000758, 0x00003FFFU ,0x00000203U), - // .. TRI_ENABLE = 1 - // .. ==> 0XF800075C[0:0] = 0x00000001U - // .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. L0_SEL = 1 - // .. ==> 0XF800075C[1:1] = 0x00000001U - // .. ==> MASK : 0x00000002U VAL : 0x00000002U - // .. L1_SEL = 0 - // .. ==> 0XF800075C[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF800075C[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF800075C[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF800075C[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF800075C[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF800075C[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF800075C[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF800075C, 0x00003FFFU ,0x00000203U), - // .. TRI_ENABLE = 1 - // .. ==> 0XF8000760[0:0] = 0x00000001U - // .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. L0_SEL = 1 - // .. ==> 0XF8000760[1:1] = 0x00000001U - // .. ==> MASK : 0x00000002U VAL : 0x00000002U - // .. L1_SEL = 0 - // .. ==> 0XF8000760[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF8000760[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF8000760[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF8000760[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF8000760[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF8000760[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000760[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000760, 0x00003FFFU ,0x00000203U), - // .. TRI_ENABLE = 1 - // .. ==> 0XF8000764[0:0] = 0x00000001U - // .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. L0_SEL = 1 - // .. ==> 0XF8000764[1:1] = 0x00000001U - // .. ==> MASK : 0x00000002U VAL : 0x00000002U - // .. L1_SEL = 0 - // .. ==> 0XF8000764[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF8000764[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF8000764[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF8000764[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF8000764[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF8000764[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000764[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000764, 0x00003FFFU ,0x00000203U), - // .. TRI_ENABLE = 1 - // .. ==> 0XF8000768[0:0] = 0x00000001U - // .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. L0_SEL = 1 - // .. ==> 0XF8000768[1:1] = 0x00000001U - // .. ==> MASK : 0x00000002U VAL : 0x00000002U - // .. L1_SEL = 0 - // .. ==> 0XF8000768[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF8000768[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF8000768[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF8000768[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF8000768[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF8000768[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000768[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000768, 0x00003FFFU ,0x00000203U), - // .. TRI_ENABLE = 1 - // .. ==> 0XF800076C[0:0] = 0x00000001U - // .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. L0_SEL = 1 - // .. ==> 0XF800076C[1:1] = 0x00000001U - // .. ==> MASK : 0x00000002U VAL : 0x00000002U - // .. L1_SEL = 0 - // .. ==> 0XF800076C[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF800076C[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF800076C[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF800076C[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF800076C[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF800076C[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF800076C[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF800076C, 0x00003FFFU ,0x00000203U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF8000770[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF8000770[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 1 - // .. ==> 0XF8000770[2:2] = 0x00000001U - // .. ==> MASK : 0x00000004U VAL : 0x00000004U - // .. L2_SEL = 0 - // .. ==> 0XF8000770[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF8000770[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF8000770[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF8000770[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF8000770[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000770[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000770, 0x00003FFFU ,0x00000204U), - // .. TRI_ENABLE = 1 - // .. ==> 0XF8000774[0:0] = 0x00000001U - // .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. L0_SEL = 0 - // .. ==> 0XF8000774[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 1 - // .. ==> 0XF8000774[2:2] = 0x00000001U - // .. ==> MASK : 0x00000004U VAL : 0x00000004U - // .. L2_SEL = 0 - // .. ==> 0XF8000774[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF8000774[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF8000774[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF8000774[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF8000774[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000774[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000774, 0x00003FFFU ,0x00000205U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF8000778[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF8000778[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 1 - // .. ==> 0XF8000778[2:2] = 0x00000001U - // .. ==> MASK : 0x00000004U VAL : 0x00000004U - // .. L2_SEL = 0 - // .. ==> 0XF8000778[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF8000778[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF8000778[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF8000778[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF8000778[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000778[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000778, 0x00003FFFU ,0x00000204U), - // .. TRI_ENABLE = 1 - // .. ==> 0XF800077C[0:0] = 0x00000001U - // .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. L0_SEL = 0 - // .. ==> 0XF800077C[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 1 - // .. ==> 0XF800077C[2:2] = 0x00000001U - // .. ==> MASK : 0x00000004U VAL : 0x00000004U - // .. L2_SEL = 0 - // .. ==> 0XF800077C[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF800077C[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF800077C[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF800077C[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF800077C[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF800077C[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF800077C, 0x00003FFFU ,0x00000205U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF8000780[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF8000780[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 1 - // .. ==> 0XF8000780[2:2] = 0x00000001U - // .. ==> MASK : 0x00000004U VAL : 0x00000004U - // .. L2_SEL = 0 - // .. ==> 0XF8000780[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF8000780[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF8000780[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF8000780[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF8000780[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000780[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000780, 0x00003FFFU ,0x00000204U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF8000784[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF8000784[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 1 - // .. ==> 0XF8000784[2:2] = 0x00000001U - // .. ==> MASK : 0x00000004U VAL : 0x00000004U - // .. L2_SEL = 0 - // .. ==> 0XF8000784[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF8000784[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF8000784[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF8000784[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF8000784[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000784[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000784, 0x00003FFFU ,0x00000204U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF8000788[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF8000788[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 1 - // .. ==> 0XF8000788[2:2] = 0x00000001U - // .. ==> MASK : 0x00000004U VAL : 0x00000004U - // .. L2_SEL = 0 - // .. ==> 0XF8000788[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF8000788[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF8000788[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF8000788[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF8000788[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000788[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000788, 0x00003FFFU ,0x00000204U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF800078C[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF800078C[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 1 - // .. ==> 0XF800078C[2:2] = 0x00000001U - // .. ==> MASK : 0x00000004U VAL : 0x00000004U - // .. L2_SEL = 0 - // .. ==> 0XF800078C[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF800078C[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF800078C[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF800078C[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF800078C[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF800078C[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF800078C, 0x00003FFFU ,0x00000204U), - // .. TRI_ENABLE = 1 - // .. ==> 0XF8000790[0:0] = 0x00000001U - // .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. L0_SEL = 0 - // .. ==> 0XF8000790[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 1 - // .. ==> 0XF8000790[2:2] = 0x00000001U - // .. ==> MASK : 0x00000004U VAL : 0x00000004U - // .. L2_SEL = 0 - // .. ==> 0XF8000790[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF8000790[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF8000790[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF8000790[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF8000790[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000790[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000790, 0x00003FFFU ,0x00000205U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF8000794[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF8000794[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 1 - // .. ==> 0XF8000794[2:2] = 0x00000001U - // .. ==> MASK : 0x00000004U VAL : 0x00000004U - // .. L2_SEL = 0 - // .. ==> 0XF8000794[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF8000794[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF8000794[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF8000794[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF8000794[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000794[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000794, 0x00003FFFU ,0x00000204U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF8000798[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF8000798[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 1 - // .. ==> 0XF8000798[2:2] = 0x00000001U - // .. ==> MASK : 0x00000004U VAL : 0x00000004U - // .. L2_SEL = 0 - // .. ==> 0XF8000798[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF8000798[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF8000798[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF8000798[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF8000798[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000798[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000798, 0x00003FFFU ,0x00000204U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF800079C[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF800079C[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 1 - // .. ==> 0XF800079C[2:2] = 0x00000001U - // .. ==> MASK : 0x00000004U VAL : 0x00000004U - // .. L2_SEL = 0 - // .. ==> 0XF800079C[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF800079C[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF800079C[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF800079C[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF800079C[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF800079C[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF800079C, 0x00003FFFU ,0x00000204U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF80007A0[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF80007A0[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 0 - // .. ==> 0XF80007A0[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF80007A0[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF80007A0[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF80007A0[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF80007A0[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF80007A0[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF80007A0[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF80007A0, 0x00003FFFU ,0x00000200U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF80007A4[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF80007A4[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 0 - // .. ==> 0XF80007A4[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF80007A4[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF80007A4[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF80007A4[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF80007A4[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF80007A4[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF80007A4[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF80007A4, 0x00003FFFU ,0x00000200U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF80007A8[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF80007A8[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 0 - // .. ==> 0XF80007A8[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF80007A8[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF80007A8[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF80007A8[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF80007A8[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF80007A8[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF80007A8[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF80007A8, 0x00003FFFU ,0x00000200U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF80007AC[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF80007AC[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 0 - // .. ==> 0XF80007AC[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF80007AC[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF80007AC[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF80007AC[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF80007AC[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF80007AC[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF80007AC[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF80007AC, 0x00003FFFU ,0x00000200U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF80007B0[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF80007B0[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 0 - // .. ==> 0XF80007B0[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF80007B0[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF80007B0[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF80007B0[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF80007B0[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF80007B0[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF80007B0[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF80007B0, 0x00003FFFU ,0x00000200U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF80007B4[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF80007B4[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 0 - // .. ==> 0XF80007B4[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF80007B4[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF80007B4[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF80007B4[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF80007B4[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF80007B4[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF80007B4[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF80007B4, 0x00003FFFU ,0x00000200U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF80007B8[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF80007B8[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 0 - // .. ==> 0XF80007B8[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF80007B8[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF80007B8[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF80007B8[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF80007B8[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF80007B8[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF80007B8[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF80007B8, 0x00003FFFU ,0x00000200U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF80007BC[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF80007BC[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 0 - // .. ==> 0XF80007BC[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF80007BC[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF80007BC[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF80007BC[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF80007BC[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF80007BC[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF80007BC[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF80007BC, 0x00003FFFU ,0x00000200U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF80007C0[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF80007C0[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 0 - // .. ==> 0XF80007C0[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF80007C0[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 7 - // .. ==> 0XF80007C0[7:5] = 0x00000007U - // .. ==> MASK : 0x000000E0U VAL : 0x000000E0U - // .. Speed = 0 - // .. ==> 0XF80007C0[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF80007C0[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF80007C0[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF80007C0[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF80007C0, 0x00003FFFU ,0x000002E0U), - // .. TRI_ENABLE = 1 - // .. ==> 0XF80007C4[0:0] = 0x00000001U - // .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. L0_SEL = 0 - // .. ==> 0XF80007C4[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 0 - // .. ==> 0XF80007C4[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF80007C4[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 7 - // .. ==> 0XF80007C4[7:5] = 0x00000007U - // .. ==> MASK : 0x000000E0U VAL : 0x000000E0U - // .. Speed = 0 - // .. ==> 0XF80007C4[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF80007C4[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF80007C4[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF80007C4[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF80007C4, 0x00003FFFU ,0x000002E1U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF80007C8[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF80007C8[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 0 - // .. ==> 0XF80007C8[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF80007C8[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF80007C8[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF80007C8[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF80007C8[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF80007C8[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF80007C8[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF80007C8, 0x00003FFFU ,0x00000200U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF80007CC[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF80007CC[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 0 - // .. ==> 0XF80007CC[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF80007CC[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF80007CC[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF80007CC[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF80007CC[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF80007CC[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF80007CC[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF80007CC, 0x00003FFFU ,0x00000200U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF80007D0[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF80007D0[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 0 - // .. ==> 0XF80007D0[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF80007D0[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 4 - // .. ==> 0XF80007D0[7:5] = 0x00000004U - // .. ==> MASK : 0x000000E0U VAL : 0x00000080U - // .. Speed = 0 - // .. ==> 0XF80007D0[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF80007D0[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF80007D0[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF80007D0[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF80007D0, 0x00003FFFU ,0x00000280U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF80007D4[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF80007D4[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 0 - // .. ==> 0XF80007D4[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF80007D4[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 4 - // .. ==> 0XF80007D4[7:5] = 0x00000004U - // .. ==> MASK : 0x000000E0U VAL : 0x00000080U - // .. Speed = 0 - // .. ==> 0XF80007D4[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF80007D4[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF80007D4[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF80007D4[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF80007D4, 0x00003FFFU ,0x00000280U), - // .. SDIO1_CD_SEL = 58 - // .. ==> 0XF8000834[21:16] = 0x0000003AU - // .. ==> MASK : 0x003F0000U VAL : 0x003A0000U - // .. - EMIT_MASKWRITE(0XF8000834, 0x003F0000U ,0x003A0000U), - // .. FINISH: MIO PROGRAMMING - // .. START: LOCK IT BACK - // .. LOCK_KEY = 0X767B - // .. ==> 0XF8000004[15:0] = 0x0000767BU - // .. ==> MASK : 0x0000FFFFU VAL : 0x0000767BU - // .. - EMIT_MASKWRITE(0XF8000004, 0x0000FFFFU ,0x0000767BU), - // .. FINISH: LOCK IT BACK - // FINISH: top - // - EMIT_EXIT(), - - // -}; - -unsigned long ps7_peripherals_init_data_2_0[] = { - // START: top - // .. START: SLCR SETTINGS - // .. UNLOCK_KEY = 0XDF0D - // .. ==> 0XF8000008[15:0] = 0x0000DF0DU - // .. ==> MASK : 0x0000FFFFU VAL : 0x0000DF0DU - // .. - EMIT_MASKWRITE(0XF8000008, 0x0000FFFFU ,0x0000DF0DU), - // .. FINISH: SLCR SETTINGS - // .. START: DDR TERM/IBUF_DISABLE_MODE SETTINGS - // .. IBUF_DISABLE_MODE = 0x1 - // .. ==> 0XF8000B48[7:7] = 0x00000001U - // .. ==> MASK : 0x00000080U VAL : 0x00000080U - // .. TERM_DISABLE_MODE = 0x1 - // .. ==> 0XF8000B48[8:8] = 0x00000001U - // .. ==> MASK : 0x00000100U VAL : 0x00000100U - // .. - EMIT_MASKWRITE(0XF8000B48, 0x00000180U ,0x00000180U), - // .. IBUF_DISABLE_MODE = 0x1 - // .. ==> 0XF8000B4C[7:7] = 0x00000001U - // .. ==> MASK : 0x00000080U VAL : 0x00000080U - // .. TERM_DISABLE_MODE = 0x1 - // .. ==> 0XF8000B4C[8:8] = 0x00000001U - // .. ==> MASK : 0x00000100U VAL : 0x00000100U - // .. - EMIT_MASKWRITE(0XF8000B4C, 0x00000180U ,0x00000180U), - // .. IBUF_DISABLE_MODE = 0x1 - // .. ==> 0XF8000B50[7:7] = 0x00000001U - // .. ==> MASK : 0x00000080U VAL : 0x00000080U - // .. TERM_DISABLE_MODE = 0x1 - // .. ==> 0XF8000B50[8:8] = 0x00000001U - // .. ==> MASK : 0x00000100U VAL : 0x00000100U - // .. - EMIT_MASKWRITE(0XF8000B50, 0x00000180U ,0x00000180U), - // .. IBUF_DISABLE_MODE = 0x1 - // .. ==> 0XF8000B54[7:7] = 0x00000001U - // .. ==> MASK : 0x00000080U VAL : 0x00000080U - // .. TERM_DISABLE_MODE = 0x1 - // .. ==> 0XF8000B54[8:8] = 0x00000001U - // .. ==> MASK : 0x00000100U VAL : 0x00000100U - // .. - EMIT_MASKWRITE(0XF8000B54, 0x00000180U ,0x00000180U), - // .. FINISH: DDR TERM/IBUF_DISABLE_MODE SETTINGS - // .. START: LOCK IT BACK - // .. LOCK_KEY = 0X767B - // .. ==> 0XF8000004[15:0] = 0x0000767BU - // .. ==> MASK : 0x0000FFFFU VAL : 0x0000767BU - // .. - EMIT_MASKWRITE(0XF8000004, 0x0000FFFFU ,0x0000767BU), - // .. FINISH: LOCK IT BACK - // .. START: SRAM/NOR SET OPMODE - // .. FINISH: SRAM/NOR SET OPMODE - // .. START: UART REGISTERS - // .. BDIV = 0x6 - // .. ==> 0XE0001034[7:0] = 0x00000006U - // .. ==> MASK : 0x000000FFU VAL : 0x00000006U - // .. - EMIT_MASKWRITE(0XE0001034, 0x000000FFU ,0x00000006U), - // .. CD = 0x3e - // .. ==> 0XE0001018[15:0] = 0x0000003EU - // .. ==> MASK : 0x0000FFFFU VAL : 0x0000003EU - // .. - EMIT_MASKWRITE(0XE0001018, 0x0000FFFFU ,0x0000003EU), - // .. STPBRK = 0x0 - // .. ==> 0XE0001000[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. STTBRK = 0x0 - // .. ==> 0XE0001000[7:7] = 0x00000000U - // .. ==> MASK : 0x00000080U VAL : 0x00000000U - // .. RSTTO = 0x0 - // .. ==> 0XE0001000[6:6] = 0x00000000U - // .. ==> MASK : 0x00000040U VAL : 0x00000000U - // .. TXDIS = 0x0 - // .. ==> 0XE0001000[5:5] = 0x00000000U - // .. ==> MASK : 0x00000020U VAL : 0x00000000U - // .. TXEN = 0x1 - // .. ==> 0XE0001000[4:4] = 0x00000001U - // .. ==> MASK : 0x00000010U VAL : 0x00000010U - // .. RXDIS = 0x0 - // .. ==> 0XE0001000[3:3] = 0x00000000U - // .. ==> MASK : 0x00000008U VAL : 0x00000000U - // .. RXEN = 0x1 - // .. ==> 0XE0001000[2:2] = 0x00000001U - // .. ==> MASK : 0x00000004U VAL : 0x00000004U - // .. TXRES = 0x1 - // .. ==> 0XE0001000[1:1] = 0x00000001U - // .. ==> MASK : 0x00000002U VAL : 0x00000002U - // .. RXRES = 0x1 - // .. ==> 0XE0001000[0:0] = 0x00000001U - // .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. - EMIT_MASKWRITE(0XE0001000, 0x000001FFU ,0x00000017U), - // .. IRMODE = 0x0 - // .. ==> 0XE0001004[11:11] = 0x00000000U - // .. ==> MASK : 0x00000800U VAL : 0x00000000U - // .. UCLKEN = 0x0 - // .. ==> 0XE0001004[10:10] = 0x00000000U - // .. ==> MASK : 0x00000400U VAL : 0x00000000U - // .. CHMODE = 0x0 - // .. ==> 0XE0001004[9:8] = 0x00000000U - // .. ==> MASK : 0x00000300U VAL : 0x00000000U - // .. NBSTOP = 0x0 - // .. ==> 0XE0001004[7:6] = 0x00000000U - // .. ==> MASK : 0x000000C0U VAL : 0x00000000U - // .. PAR = 0x4 - // .. ==> 0XE0001004[5:3] = 0x00000004U - // .. ==> MASK : 0x00000038U VAL : 0x00000020U - // .. CHRL = 0x0 - // .. ==> 0XE0001004[2:1] = 0x00000000U - // .. ==> MASK : 0x00000006U VAL : 0x00000000U - // .. CLKS = 0x0 - // .. ==> 0XE0001004[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XE0001004, 0x00000FFFU ,0x00000020U), - // .. FINISH: UART REGISTERS - // .. START: TPIU WIDTH IN CASE OF EMIO - // .. .. START: TRACE LOCK ACCESS REGISTER - // .. .. a = 0XC5ACCE55 - // .. .. ==> 0XF8803FB0[31:0] = 0xC5ACCE55U - // .. .. ==> MASK : 0xFFFFFFFFU VAL : 0xC5ACCE55U - // .. .. - EMIT_MASKWRITE(0XF8803FB0, 0xFFFFFFFFU ,0xC5ACCE55U), - // .. .. FINISH: TRACE LOCK ACCESS REGISTER - // .. .. START: TRACE CURRENT PORT SIZE - // .. .. a = 2 - // .. .. ==> 0XF8803004[31:0] = 0x00000002U - // .. .. ==> MASK : 0xFFFFFFFFU VAL : 0x00000002U - // .. .. - EMIT_MASKWRITE(0XF8803004, 0xFFFFFFFFU ,0x00000002U), - // .. .. FINISH: TRACE CURRENT PORT SIZE - // .. .. START: TRACE LOCK ACCESS REGISTER - // .. .. a = 0X0 - // .. .. ==> 0XF8803FB0[31:0] = 0x00000000U - // .. .. ==> MASK : 0xFFFFFFFFU VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8803FB0, 0xFFFFFFFFU ,0x00000000U), - // .. .. FINISH: TRACE LOCK ACCESS REGISTER - // .. FINISH: TPIU WIDTH IN CASE OF EMIO - // .. START: QSPI REGISTERS - // .. Holdb_dr = 1 - // .. ==> 0XE000D000[19:19] = 0x00000001U - // .. ==> MASK : 0x00080000U VAL : 0x00080000U - // .. - EMIT_MASKWRITE(0XE000D000, 0x00080000U ,0x00080000U), - // .. FINISH: QSPI REGISTERS - // .. START: PL POWER ON RESET REGISTERS - // .. PCFG_POR_CNT_4K = 0 - // .. ==> 0XF8007000[29:29] = 0x00000000U - // .. ==> MASK : 0x20000000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8007000, 0x20000000U ,0x00000000U), - // .. FINISH: PL POWER ON RESET REGISTERS - // .. START: SMC TIMING CALCULATION REGISTER UPDATE - // .. .. START: NAND SET CYCLE - // .. .. FINISH: NAND SET CYCLE - // .. .. START: OPMODE - // .. .. FINISH: OPMODE - // .. .. START: DIRECT COMMAND - // .. .. FINISH: DIRECT COMMAND - // .. .. START: SRAM/NOR CS0 SET CYCLE - // .. .. FINISH: SRAM/NOR CS0 SET CYCLE - // .. .. START: DIRECT COMMAND - // .. .. FINISH: DIRECT COMMAND - // .. .. START: NOR CS0 BASE ADDRESS - // .. .. FINISH: NOR CS0 BASE ADDRESS - // .. .. START: SRAM/NOR CS1 SET CYCLE - // .. .. FINISH: SRAM/NOR CS1 SET CYCLE - // .. .. START: DIRECT COMMAND - // .. .. FINISH: DIRECT COMMAND - // .. .. START: NOR CS1 BASE ADDRESS - // .. .. FINISH: NOR CS1 BASE ADDRESS - // .. .. START: USB RESET - // .. .. .. START: USB0 RESET - // .. .. .. .. START: DIR MODE BANK 0 - // .. .. .. .. DIRECTION_0 = 0x80 - // .. .. .. .. ==> 0XE000A204[31:0] = 0x00000080U - // .. .. .. .. ==> MASK : 0xFFFFFFFFU VAL : 0x00000080U - // .. .. .. .. - EMIT_MASKWRITE(0XE000A204, 0xFFFFFFFFU ,0x00000080U), - // .. .. .. .. FINISH: DIR MODE BANK 0 - // .. .. .. .. START: DIR MODE BANK 1 - // .. .. .. .. FINISH: DIR MODE BANK 1 - // .. .. .. .. START: MASK_DATA_0_LSW HIGH BANK [15:0] - // .. .. .. .. MASK_0_LSW = 0xff7f - // .. .. .. .. ==> 0XE000A000[31:16] = 0x0000FF7FU - // .. .. .. .. ==> MASK : 0xFFFF0000U VAL : 0xFF7F0000U - // .. .. .. .. DATA_0_LSW = 0x80 - // .. .. .. .. ==> 0XE000A000[15:0] = 0x00000080U - // .. .. .. .. ==> MASK : 0x0000FFFFU VAL : 0x00000080U - // .. .. .. .. - EMIT_MASKWRITE(0XE000A000, 0xFFFFFFFFU ,0xFF7F0080U), - // .. .. .. .. FINISH: MASK_DATA_0_LSW HIGH BANK [15:0] - // .. .. .. .. START: MASK_DATA_0_MSW HIGH BANK [31:16] - // .. .. .. .. FINISH: MASK_DATA_0_MSW HIGH BANK [31:16] - // .. .. .. .. START: MASK_DATA_1_LSW HIGH BANK [47:32] - // .. .. .. .. FINISH: MASK_DATA_1_LSW HIGH BANK [47:32] - // .. .. .. .. START: MASK_DATA_1_MSW HIGH BANK [53:48] - // .. .. .. .. FINISH: MASK_DATA_1_MSW HIGH BANK [53:48] - // .. .. .. .. START: OUTPUT ENABLE BANK 0 - // .. .. .. .. OP_ENABLE_0 = 0x80 - // .. .. .. .. ==> 0XE000A208[31:0] = 0x00000080U - // .. .. .. .. ==> MASK : 0xFFFFFFFFU VAL : 0x00000080U - // .. .. .. .. - EMIT_MASKWRITE(0XE000A208, 0xFFFFFFFFU ,0x00000080U), - // .. .. .. .. FINISH: OUTPUT ENABLE BANK 0 - // .. .. .. .. START: OUTPUT ENABLE BANK 1 - // .. .. .. .. FINISH: OUTPUT ENABLE BANK 1 - // .. .. .. .. START: MASK_DATA_0_LSW LOW BANK [15:0] - // .. .. .. .. MASK_0_LSW = 0xff7f - // .. .. .. .. ==> 0XE000A000[31:16] = 0x0000FF7FU - // .. .. .. .. ==> MASK : 0xFFFF0000U VAL : 0xFF7F0000U - // .. .. .. .. DATA_0_LSW = 0x0 - // .. .. .. .. ==> 0XE000A000[15:0] = 0x00000000U - // .. .. .. .. ==> MASK : 0x0000FFFFU VAL : 0x00000000U - // .. .. .. .. - EMIT_MASKWRITE(0XE000A000, 0xFFFFFFFFU ,0xFF7F0000U), - // .. .. .. .. FINISH: MASK_DATA_0_LSW LOW BANK [15:0] - // .. .. .. .. START: MASK_DATA_0_MSW LOW BANK [31:16] - // .. .. .. .. FINISH: MASK_DATA_0_MSW LOW BANK [31:16] - // .. .. .. .. START: MASK_DATA_1_LSW LOW BANK [47:32] - // .. .. .. .. FINISH: MASK_DATA_1_LSW LOW BANK [47:32] - // .. .. .. .. START: MASK_DATA_1_MSW LOW BANK [53:48] - // .. .. .. .. FINISH: MASK_DATA_1_MSW LOW BANK [53:48] - // .. .. .. .. START: ADD 1 MS DELAY - // .. .. .. .. - EMIT_MASKDELAY(0XF8F00200, 1), - // .. .. .. .. FINISH: ADD 1 MS DELAY - // .. .. .. .. START: MASK_DATA_0_LSW HIGH BANK [15:0] - // .. .. .. .. MASK_0_LSW = 0xff7f - // .. .. .. .. ==> 0XE000A000[31:16] = 0x0000FF7FU - // .. .. .. .. ==> MASK : 0xFFFF0000U VAL : 0xFF7F0000U - // .. .. .. .. DATA_0_LSW = 0x80 - // .. .. .. .. ==> 0XE000A000[15:0] = 0x00000080U - // .. .. .. .. ==> MASK : 0x0000FFFFU VAL : 0x00000080U - // .. .. .. .. - EMIT_MASKWRITE(0XE000A000, 0xFFFFFFFFU ,0xFF7F0080U), - // .. .. .. .. FINISH: MASK_DATA_0_LSW HIGH BANK [15:0] - // .. .. .. .. START: MASK_DATA_0_MSW HIGH BANK [31:16] - // .. .. .. .. FINISH: MASK_DATA_0_MSW HIGH BANK [31:16] - // .. .. .. .. START: MASK_DATA_1_LSW HIGH BANK [47:32] - // .. .. .. .. FINISH: MASK_DATA_1_LSW HIGH BANK [47:32] - // .. .. .. .. START: MASK_DATA_1_MSW HIGH BANK [53:48] - // .. .. .. .. FINISH: MASK_DATA_1_MSW HIGH BANK [53:48] - // .. .. .. FINISH: USB0 RESET - // .. .. .. START: USB1 RESET - // .. .. .. .. START: DIR MODE BANK 0 - // .. .. .. .. FINISH: DIR MODE BANK 0 - // .. .. .. .. START: DIR MODE BANK 1 - // .. .. .. .. FINISH: DIR MODE BANK 1 - // .. .. .. .. START: MASK_DATA_0_LSW HIGH BANK [15:0] - // .. .. .. .. FINISH: MASK_DATA_0_LSW HIGH BANK [15:0] - // .. .. .. .. START: MASK_DATA_0_MSW HIGH BANK [31:16] - // .. .. .. .. FINISH: MASK_DATA_0_MSW HIGH BANK [31:16] - // .. .. .. .. START: MASK_DATA_1_LSW HIGH BANK [47:32] - // .. .. .. .. FINISH: MASK_DATA_1_LSW HIGH BANK [47:32] - // .. .. .. .. START: MASK_DATA_1_MSW HIGH BANK [53:48] - // .. .. .. .. FINISH: MASK_DATA_1_MSW HIGH BANK [53:48] - // .. .. .. .. START: OUTPUT ENABLE BANK 0 - // .. .. .. .. FINISH: OUTPUT ENABLE BANK 0 - // .. .. .. .. START: OUTPUT ENABLE BANK 1 - // .. .. .. .. FINISH: OUTPUT ENABLE BANK 1 - // .. .. .. .. START: MASK_DATA_0_LSW LOW BANK [15:0] - // .. .. .. .. FINISH: MASK_DATA_0_LSW LOW BANK [15:0] - // .. .. .. .. START: MASK_DATA_0_MSW LOW BANK [31:16] - // .. .. .. .. FINISH: MASK_DATA_0_MSW LOW BANK [31:16] - // .. .. .. .. START: MASK_DATA_1_LSW LOW BANK [47:32] - // .. .. .. .. FINISH: MASK_DATA_1_LSW LOW BANK [47:32] - // .. .. .. .. START: MASK_DATA_1_MSW LOW BANK [53:48] - // .. .. .. .. FINISH: MASK_DATA_1_MSW LOW BANK [53:48] - // .. .. .. .. START: ADD 1 MS DELAY - // .. .. .. .. - EMIT_MASKDELAY(0XF8F00200, 1), - // .. .. .. .. FINISH: ADD 1 MS DELAY - // .. .. .. .. START: MASK_DATA_0_LSW HIGH BANK [15:0] - // .. .. .. .. FINISH: MASK_DATA_0_LSW HIGH BANK [15:0] - // .. .. .. .. START: MASK_DATA_0_MSW HIGH BANK [31:16] - // .. .. .. .. FINISH: MASK_DATA_0_MSW HIGH BANK [31:16] - // .. .. .. .. START: MASK_DATA_1_LSW HIGH BANK [47:32] - // .. .. .. .. FINISH: MASK_DATA_1_LSW HIGH BANK [47:32] - // .. .. .. .. START: MASK_DATA_1_MSW HIGH BANK [53:48] - // .. .. .. .. FINISH: MASK_DATA_1_MSW HIGH BANK [53:48] - // .. .. .. FINISH: USB1 RESET - // .. .. FINISH: USB RESET - // .. .. START: ENET RESET - // .. .. .. START: ENET0 RESET - // .. .. .. .. START: DIR MODE BANK 0 - // .. .. .. .. FINISH: DIR MODE BANK 0 - // .. .. .. .. START: DIR MODE BANK 1 - // .. .. .. .. FINISH: DIR MODE BANK 1 - // .. .. .. .. START: MASK_DATA_0_LSW HIGH BANK [15:0] - // .. .. .. .. FINISH: MASK_DATA_0_LSW HIGH BANK [15:0] - // .. .. .. .. START: MASK_DATA_0_MSW HIGH BANK [31:16] - // .. .. .. .. FINISH: MASK_DATA_0_MSW HIGH BANK [31:16] - // .. .. .. .. START: MASK_DATA_1_LSW HIGH BANK [47:32] - // .. .. .. .. FINISH: MASK_DATA_1_LSW HIGH BANK [47:32] - // .. .. .. .. START: MASK_DATA_1_MSW HIGH BANK [53:48] - // .. .. .. .. FINISH: MASK_DATA_1_MSW HIGH BANK [53:48] - // .. .. .. .. START: OUTPUT ENABLE BANK 0 - // .. .. .. .. FINISH: OUTPUT ENABLE BANK 0 - // .. .. .. .. START: OUTPUT ENABLE BANK 1 - // .. .. .. .. FINISH: OUTPUT ENABLE BANK 1 - // .. .. .. .. START: MASK_DATA_0_LSW LOW BANK [15:0] - // .. .. .. .. FINISH: MASK_DATA_0_LSW LOW BANK [15:0] - // .. .. .. .. START: MASK_DATA_0_MSW LOW BANK [31:16] - // .. .. .. .. FINISH: MASK_DATA_0_MSW LOW BANK [31:16] - // .. .. .. .. START: MASK_DATA_1_LSW LOW BANK [47:32] - // .. .. .. .. FINISH: MASK_DATA_1_LSW LOW BANK [47:32] - // .. .. .. .. START: MASK_DATA_1_MSW LOW BANK [53:48] - // .. .. .. .. FINISH: MASK_DATA_1_MSW LOW BANK [53:48] - // .. .. .. .. START: ADD 1 MS DELAY - // .. .. .. .. - EMIT_MASKDELAY(0XF8F00200, 1), - // .. .. .. .. FINISH: ADD 1 MS DELAY - // .. .. .. .. START: MASK_DATA_0_LSW HIGH BANK [15:0] - // .. .. .. .. FINISH: MASK_DATA_0_LSW HIGH BANK [15:0] - // .. .. .. .. START: MASK_DATA_0_MSW HIGH BANK [31:16] - // .. .. .. .. FINISH: MASK_DATA_0_MSW HIGH BANK [31:16] - // .. .. .. .. START: MASK_DATA_1_LSW HIGH BANK [47:32] - // .. .. .. .. FINISH: MASK_DATA_1_LSW HIGH BANK [47:32] - // .. .. .. .. START: MASK_DATA_1_MSW HIGH BANK [53:48] - // .. .. .. .. FINISH: MASK_DATA_1_MSW HIGH BANK [53:48] - // .. .. .. FINISH: ENET0 RESET - // .. .. .. START: ENET1 RESET - // .. .. .. .. START: DIR MODE BANK 0 - // .. .. .. .. FINISH: DIR MODE BANK 0 - // .. .. .. .. START: DIR MODE BANK 1 - // .. .. .. .. FINISH: DIR MODE BANK 1 - // .. .. .. .. START: MASK_DATA_0_LSW HIGH BANK [15:0] - // .. .. .. .. FINISH: MASK_DATA_0_LSW HIGH BANK [15:0] - // .. .. .. .. START: MASK_DATA_0_MSW HIGH BANK [31:16] - // .. .. .. .. FINISH: MASK_DATA_0_MSW HIGH BANK [31:16] - // .. .. .. .. START: MASK_DATA_1_LSW HIGH BANK [47:32] - // .. .. .. .. FINISH: MASK_DATA_1_LSW HIGH BANK [47:32] - // .. .. .. .. START: MASK_DATA_1_MSW HIGH BANK [53:48] - // .. .. .. .. FINISH: MASK_DATA_1_MSW HIGH BANK [53:48] - // .. .. .. .. START: OUTPUT ENABLE BANK 0 - // .. .. .. .. FINISH: OUTPUT ENABLE BANK 0 - // .. .. .. .. START: OUTPUT ENABLE BANK 1 - // .. .. .. .. FINISH: OUTPUT ENABLE BANK 1 - // .. .. .. .. START: MASK_DATA_0_LSW LOW BANK [15:0] - // .. .. .. .. FINISH: MASK_DATA_0_LSW LOW BANK [15:0] - // .. .. .. .. START: MASK_DATA_0_MSW LOW BANK [31:16] - // .. .. .. .. FINISH: MASK_DATA_0_MSW LOW BANK [31:16] - // .. .. .. .. START: MASK_DATA_1_LSW LOW BANK [47:32] - // .. .. .. .. FINISH: MASK_DATA_1_LSW LOW BANK [47:32] - // .. .. .. .. START: MASK_DATA_1_MSW LOW BANK [53:48] - // .. .. .. .. FINISH: MASK_DATA_1_MSW LOW BANK [53:48] - // .. .. .. .. START: ADD 1 MS DELAY - // .. .. .. .. - EMIT_MASKDELAY(0XF8F00200, 1), - // .. .. .. .. FINISH: ADD 1 MS DELAY - // .. .. .. .. START: MASK_DATA_0_LSW HIGH BANK [15:0] - // .. .. .. .. FINISH: MASK_DATA_0_LSW HIGH BANK [15:0] - // .. .. .. .. START: MASK_DATA_0_MSW HIGH BANK [31:16] - // .. .. .. .. FINISH: MASK_DATA_0_MSW HIGH BANK [31:16] - // .. .. .. .. START: MASK_DATA_1_LSW HIGH BANK [47:32] - // .. .. .. .. FINISH: MASK_DATA_1_LSW HIGH BANK [47:32] - // .. .. .. .. START: MASK_DATA_1_MSW HIGH BANK [53:48] - // .. .. .. .. FINISH: MASK_DATA_1_MSW HIGH BANK [53:48] - // .. .. .. FINISH: ENET1 RESET - // .. .. FINISH: ENET RESET - // .. .. START: I2C RESET - // .. .. .. START: I2C0 RESET - // .. .. .. .. START: DIR MODE GPIO BANK0 - // .. .. .. .. FINISH: DIR MODE GPIO BANK0 - // .. .. .. .. START: DIR MODE GPIO BANK1 - // .. .. .. .. FINISH: DIR MODE GPIO BANK1 - // .. .. .. .. START: MASK_DATA_0_LSW HIGH BANK [15:0] - // .. .. .. .. FINISH: MASK_DATA_0_LSW HIGH BANK [15:0] - // .. .. .. .. START: MASK_DATA_0_MSW HIGH BANK [31:16] - // .. .. .. .. FINISH: MASK_DATA_0_MSW HIGH BANK [31:16] - // .. .. .. .. START: MASK_DATA_1_LSW HIGH BANK [47:32] - // .. .. .. .. FINISH: MASK_DATA_1_LSW HIGH BANK [47:32] - // .. .. .. .. START: MASK_DATA_1_MSW HIGH BANK [53:48] - // .. .. .. .. FINISH: MASK_DATA_1_MSW HIGH BANK [53:48] - // .. .. .. .. START: OUTPUT ENABLE - // .. .. .. .. FINISH: OUTPUT ENABLE - // .. .. .. .. START: OUTPUT ENABLE - // .. .. .. .. FINISH: OUTPUT ENABLE - // .. .. .. .. START: MASK_DATA_0_LSW LOW BANK [15:0] - // .. .. .. .. FINISH: MASK_DATA_0_LSW LOW BANK [15:0] - // .. .. .. .. START: MASK_DATA_0_MSW LOW BANK [31:16] - // .. .. .. .. FINISH: MASK_DATA_0_MSW LOW BANK [31:16] - // .. .. .. .. START: MASK_DATA_1_LSW LOW BANK [47:32] - // .. .. .. .. FINISH: MASK_DATA_1_LSW LOW BANK [47:32] - // .. .. .. .. START: MASK_DATA_1_MSW LOW BANK [53:48] - // .. .. .. .. FINISH: MASK_DATA_1_MSW LOW BANK [53:48] - // .. .. .. .. START: ADD 1 MS DELAY - // .. .. .. .. - EMIT_MASKDELAY(0XF8F00200, 1), - // .. .. .. .. FINISH: ADD 1 MS DELAY - // .. .. .. .. START: MASK_DATA_0_LSW HIGH BANK [15:0] - // .. .. .. .. FINISH: MASK_DATA_0_LSW HIGH BANK [15:0] - // .. .. .. .. START: MASK_DATA_0_MSW HIGH BANK [31:16] - // .. .. .. .. FINISH: MASK_DATA_0_MSW HIGH BANK [31:16] - // .. .. .. .. START: MASK_DATA_1_LSW HIGH BANK [47:32] - // .. .. .. .. FINISH: MASK_DATA_1_LSW HIGH BANK [47:32] - // .. .. .. .. START: MASK_DATA_1_MSW HIGH BANK [53:48] - // .. .. .. .. FINISH: MASK_DATA_1_MSW HIGH BANK [53:48] - // .. .. .. FINISH: I2C0 RESET - // .. .. .. START: I2C1 RESET - // .. .. .. .. START: DIR MODE GPIO BANK0 - // .. .. .. .. FINISH: DIR MODE GPIO BANK0 - // .. .. .. .. START: DIR MODE GPIO BANK1 - // .. .. .. .. FINISH: DIR MODE GPIO BANK1 - // .. .. .. .. START: MASK_DATA_0_LSW HIGH BANK [15:0] - // .. .. .. .. FINISH: MASK_DATA_0_LSW HIGH BANK [15:0] - // .. .. .. .. START: MASK_DATA_0_MSW HIGH BANK [31:16] - // .. .. .. .. FINISH: MASK_DATA_0_MSW HIGH BANK [31:16] - // .. .. .. .. START: MASK_DATA_1_LSW HIGH BANK [47:32] - // .. .. .. .. FINISH: MASK_DATA_1_LSW HIGH BANK [47:32] - // .. .. .. .. START: MASK_DATA_1_MSW HIGH BANK [53:48] - // .. .. .. .. FINISH: MASK_DATA_1_MSW HIGH BANK [53:48] - // .. .. .. .. START: OUTPUT ENABLE - // .. .. .. .. FINISH: OUTPUT ENABLE - // .. .. .. .. START: OUTPUT ENABLE - // .. .. .. .. FINISH: OUTPUT ENABLE - // .. .. .. .. START: MASK_DATA_0_LSW LOW BANK [15:0] - // .. .. .. .. FINISH: MASK_DATA_0_LSW LOW BANK [15:0] - // .. .. .. .. START: MASK_DATA_0_MSW LOW BANK [31:16] - // .. .. .. .. FINISH: MASK_DATA_0_MSW LOW BANK [31:16] - // .. .. .. .. START: MASK_DATA_1_LSW LOW BANK [47:32] - // .. .. .. .. FINISH: MASK_DATA_1_LSW LOW BANK [47:32] - // .. .. .. .. START: MASK_DATA_1_MSW LOW BANK [53:48] - // .. .. .. .. FINISH: MASK_DATA_1_MSW LOW BANK [53:48] - // .. .. .. .. START: ADD 1 MS DELAY - // .. .. .. .. - EMIT_MASKDELAY(0XF8F00200, 1), - // .. .. .. .. FINISH: ADD 1 MS DELAY - // .. .. .. .. START: MASK_DATA_0_LSW HIGH BANK [15:0] - // .. .. .. .. FINISH: MASK_DATA_0_LSW HIGH BANK [15:0] - // .. .. .. .. START: MASK_DATA_0_MSW HIGH BANK [31:16] - // .. .. .. .. FINISH: MASK_DATA_0_MSW HIGH BANK [31:16] - // .. .. .. .. START: MASK_DATA_1_LSW HIGH BANK [47:32] - // .. .. .. .. FINISH: MASK_DATA_1_LSW HIGH BANK [47:32] - // .. .. .. .. START: MASK_DATA_1_MSW HIGH BANK [53:48] - // .. .. .. .. FINISH: MASK_DATA_1_MSW HIGH BANK [53:48] - // .. .. .. FINISH: I2C1 RESET - // .. .. FINISH: I2C RESET - // .. .. START: NOR CHIP SELECT - // .. .. .. START: DIR MODE BANK 0 - // .. .. .. FINISH: DIR MODE BANK 0 - // .. .. .. START: MASK_DATA_0_LSW HIGH BANK [15:0] - // .. .. .. FINISH: MASK_DATA_0_LSW HIGH BANK [15:0] - // .. .. .. START: OUTPUT ENABLE BANK 0 - // .. .. .. FINISH: OUTPUT ENABLE BANK 0 - // .. .. FINISH: NOR CHIP SELECT - // .. FINISH: SMC TIMING CALCULATION REGISTER UPDATE - // FINISH: top - // - EMIT_EXIT(), - - // -}; - -unsigned long ps7_post_config_2_0[] = { - // START: top - // .. START: SLCR SETTINGS - // .. UNLOCK_KEY = 0XDF0D - // .. ==> 0XF8000008[15:0] = 0x0000DF0DU - // .. ==> MASK : 0x0000FFFFU VAL : 0x0000DF0DU - // .. - EMIT_MASKWRITE(0XF8000008, 0x0000FFFFU ,0x0000DF0DU), - // .. FINISH: SLCR SETTINGS - // .. START: ENABLING LEVEL SHIFTER - // .. USER_INP_ICT_EN_0 = 3 - // .. ==> 0XF8000900[1:0] = 0x00000003U - // .. ==> MASK : 0x00000003U VAL : 0x00000003U - // .. USER_INP_ICT_EN_1 = 3 - // .. ==> 0XF8000900[3:2] = 0x00000003U - // .. ==> MASK : 0x0000000CU VAL : 0x0000000CU - // .. - EMIT_MASKWRITE(0XF8000900, 0x0000000FU ,0x0000000FU), - // .. FINISH: ENABLING LEVEL SHIFTER - // .. START: TPIU WIDTH IN CASE OF EMIO - // .. .. START: TRACE LOCK ACCESS REGISTER - // .. .. a = 0XC5ACCE55 - // .. .. ==> 0XF8803FB0[31:0] = 0xC5ACCE55U - // .. .. ==> MASK : 0xFFFFFFFFU VAL : 0xC5ACCE55U - // .. .. - EMIT_MASKWRITE(0XF8803FB0, 0xFFFFFFFFU ,0xC5ACCE55U), - // .. .. FINISH: TRACE LOCK ACCESS REGISTER - // .. .. START: TRACE CURRENT PORT SIZE - // .. .. a = 2 - // .. .. ==> 0XF8803004[31:0] = 0x00000002U - // .. .. ==> MASK : 0xFFFFFFFFU VAL : 0x00000002U - // .. .. - EMIT_MASKWRITE(0XF8803004, 0xFFFFFFFFU ,0x00000002U), - // .. .. FINISH: TRACE CURRENT PORT SIZE - // .. .. START: TRACE LOCK ACCESS REGISTER - // .. .. a = 0X0 - // .. .. ==> 0XF8803FB0[31:0] = 0x00000000U - // .. .. ==> MASK : 0xFFFFFFFFU VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8803FB0, 0xFFFFFFFFU ,0x00000000U), - // .. .. FINISH: TRACE LOCK ACCESS REGISTER - // .. FINISH: TPIU WIDTH IN CASE OF EMIO - // .. START: FPGA RESETS TO 0 - // .. reserved_3 = 0 - // .. ==> 0XF8000240[31:25] = 0x00000000U - // .. ==> MASK : 0xFE000000U VAL : 0x00000000U - // .. FPGA_ACP_RST = 0 - // .. ==> 0XF8000240[24:24] = 0x00000000U - // .. ==> MASK : 0x01000000U VAL : 0x00000000U - // .. FPGA_AXDS3_RST = 0 - // .. ==> 0XF8000240[23:23] = 0x00000000U - // .. ==> MASK : 0x00800000U VAL : 0x00000000U - // .. FPGA_AXDS2_RST = 0 - // .. ==> 0XF8000240[22:22] = 0x00000000U - // .. ==> MASK : 0x00400000U VAL : 0x00000000U - // .. FPGA_AXDS1_RST = 0 - // .. ==> 0XF8000240[21:21] = 0x00000000U - // .. ==> MASK : 0x00200000U VAL : 0x00000000U - // .. FPGA_AXDS0_RST = 0 - // .. ==> 0XF8000240[20:20] = 0x00000000U - // .. ==> MASK : 0x00100000U VAL : 0x00000000U - // .. reserved_2 = 0 - // .. ==> 0XF8000240[19:18] = 0x00000000U - // .. ==> MASK : 0x000C0000U VAL : 0x00000000U - // .. FSSW1_FPGA_RST = 0 - // .. ==> 0XF8000240[17:17] = 0x00000000U - // .. ==> MASK : 0x00020000U VAL : 0x00000000U - // .. FSSW0_FPGA_RST = 0 - // .. ==> 0XF8000240[16:16] = 0x00000000U - // .. ==> MASK : 0x00010000U VAL : 0x00000000U - // .. reserved_1 = 0 - // .. ==> 0XF8000240[15:14] = 0x00000000U - // .. ==> MASK : 0x0000C000U VAL : 0x00000000U - // .. FPGA_FMSW1_RST = 0 - // .. ==> 0XF8000240[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. FPGA_FMSW0_RST = 0 - // .. ==> 0XF8000240[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. FPGA_DMA3_RST = 0 - // .. ==> 0XF8000240[11:11] = 0x00000000U - // .. ==> MASK : 0x00000800U VAL : 0x00000000U - // .. FPGA_DMA2_RST = 0 - // .. ==> 0XF8000240[10:10] = 0x00000000U - // .. ==> MASK : 0x00000400U VAL : 0x00000000U - // .. FPGA_DMA1_RST = 0 - // .. ==> 0XF8000240[9:9] = 0x00000000U - // .. ==> MASK : 0x00000200U VAL : 0x00000000U - // .. FPGA_DMA0_RST = 0 - // .. ==> 0XF8000240[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. reserved = 0 - // .. ==> 0XF8000240[7:4] = 0x00000000U - // .. ==> MASK : 0x000000F0U VAL : 0x00000000U - // .. FPGA3_OUT_RST = 0 - // .. ==> 0XF8000240[3:3] = 0x00000000U - // .. ==> MASK : 0x00000008U VAL : 0x00000000U - // .. FPGA2_OUT_RST = 0 - // .. ==> 0XF8000240[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. FPGA1_OUT_RST = 0 - // .. ==> 0XF8000240[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. FPGA0_OUT_RST = 0 - // .. ==> 0XF8000240[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000240, 0xFFFFFFFFU ,0x00000000U), - // .. FINISH: FPGA RESETS TO 0 - // .. START: AFI REGISTERS - // .. .. START: AFI0 REGISTERS - // .. .. FINISH: AFI0 REGISTERS - // .. .. START: AFI1 REGISTERS - // .. .. FINISH: AFI1 REGISTERS - // .. .. START: AFI2 REGISTERS - // .. .. FINISH: AFI2 REGISTERS - // .. .. START: AFI3 REGISTERS - // .. .. FINISH: AFI3 REGISTERS - // .. FINISH: AFI REGISTERS - // .. START: LOCK IT BACK - // .. LOCK_KEY = 0X767B - // .. ==> 0XF8000004[15:0] = 0x0000767BU - // .. ==> MASK : 0x0000FFFFU VAL : 0x0000767BU - // .. - EMIT_MASKWRITE(0XF8000004, 0x0000FFFFU ,0x0000767BU), - // .. FINISH: LOCK IT BACK - // FINISH: top - // - EMIT_EXIT(), - - // -}; - -unsigned long ps7_debug_2_0[] = { - // START: top - // .. START: CROSS TRIGGER CONFIGURATIONS - // .. .. START: UNLOCKING CTI REGISTERS - // .. .. KEY = 0XC5ACCE55 - // .. .. ==> 0XF8898FB0[31:0] = 0xC5ACCE55U - // .. .. ==> MASK : 0xFFFFFFFFU VAL : 0xC5ACCE55U - // .. .. - EMIT_MASKWRITE(0XF8898FB0, 0xFFFFFFFFU ,0xC5ACCE55U), - // .. .. KEY = 0XC5ACCE55 - // .. .. ==> 0XF8899FB0[31:0] = 0xC5ACCE55U - // .. .. ==> MASK : 0xFFFFFFFFU VAL : 0xC5ACCE55U - // .. .. - EMIT_MASKWRITE(0XF8899FB0, 0xFFFFFFFFU ,0xC5ACCE55U), - // .. .. KEY = 0XC5ACCE55 - // .. .. ==> 0XF8809FB0[31:0] = 0xC5ACCE55U - // .. .. ==> MASK : 0xFFFFFFFFU VAL : 0xC5ACCE55U - // .. .. - EMIT_MASKWRITE(0XF8809FB0, 0xFFFFFFFFU ,0xC5ACCE55U), - // .. .. FINISH: UNLOCKING CTI REGISTERS - // .. .. START: ENABLING CTI MODULES AND CHANNELS - // .. .. FINISH: ENABLING CTI MODULES AND CHANNELS - // .. .. START: MAPPING CPU0, CPU1 AND FTM EVENTS TO CTM CHANNELS - // .. .. FINISH: MAPPING CPU0, CPU1 AND FTM EVENTS TO CTM CHANNELS - // .. FINISH: CROSS TRIGGER CONFIGURATIONS - // FINISH: top - // - EMIT_EXIT(), - - // -}; - -unsigned long ps7_pll_init_data_1_0[] = { - // START: top - // .. START: SLCR SETTINGS - // .. UNLOCK_KEY = 0XDF0D - // .. ==> 0XF8000008[15:0] = 0x0000DF0DU - // .. ==> MASK : 0x0000FFFFU VAL : 0x0000DF0DU - // .. - EMIT_MASKWRITE(0XF8000008, 0x0000FFFFU ,0x0000DF0DU), - // .. FINISH: SLCR SETTINGS - // .. START: PLL SLCR REGISTERS - // .. .. START: ARM PLL INIT - // .. .. PLL_RES = 0x4 - // .. .. ==> 0XF8000110[7:4] = 0x00000004U - // .. .. ==> MASK : 0x000000F0U VAL : 0x00000040U - // .. .. PLL_CP = 0x2 - // .. .. ==> 0XF8000110[11:8] = 0x00000002U - // .. .. ==> MASK : 0x00000F00U VAL : 0x00000200U - // .. .. LOCK_CNT = 0xfa - // .. .. ==> 0XF8000110[21:12] = 0x000000FAU - // .. .. ==> MASK : 0x003FF000U VAL : 0x000FA000U - // .. .. - EMIT_MASKWRITE(0XF8000110, 0x003FFFF0U ,0x000FA240U), - // .. .. .. START: UPDATE FB_DIV - // .. .. .. PLL_FDIV = 0x3c - // .. .. .. ==> 0XF8000100[18:12] = 0x0000003CU - // .. .. .. ==> MASK : 0x0007F000U VAL : 0x0003C000U - // .. .. .. - EMIT_MASKWRITE(0XF8000100, 0x0007F000U ,0x0003C000U), - // .. .. .. FINISH: UPDATE FB_DIV - // .. .. .. START: BY PASS PLL - // .. .. .. PLL_BYPASS_FORCE = 1 - // .. .. .. ==> 0XF8000100[4:4] = 0x00000001U - // .. .. .. ==> MASK : 0x00000010U VAL : 0x00000010U - // .. .. .. - EMIT_MASKWRITE(0XF8000100, 0x00000010U ,0x00000010U), - // .. .. .. FINISH: BY PASS PLL - // .. .. .. START: ASSERT RESET - // .. .. .. PLL_RESET = 1 - // .. .. .. ==> 0XF8000100[0:0] = 0x00000001U - // .. .. .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. .. .. - EMIT_MASKWRITE(0XF8000100, 0x00000001U ,0x00000001U), - // .. .. .. FINISH: ASSERT RESET - // .. .. .. START: DEASSERT RESET - // .. .. .. PLL_RESET = 0 - // .. .. .. ==> 0XF8000100[0:0] = 0x00000000U - // .. .. .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. .. .. - EMIT_MASKWRITE(0XF8000100, 0x00000001U ,0x00000000U), - // .. .. .. FINISH: DEASSERT RESET - // .. .. .. START: CHECK PLL STATUS - // .. .. .. ARM_PLL_LOCK = 1 - // .. .. .. ==> 0XF800010C[0:0] = 0x00000001U - // .. .. .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. .. .. - EMIT_MASKPOLL(0XF800010C, 0x00000001U), - // .. .. .. FINISH: CHECK PLL STATUS - // .. .. .. START: REMOVE PLL BY PASS - // .. .. .. PLL_BYPASS_FORCE = 0 - // .. .. .. ==> 0XF8000100[4:4] = 0x00000000U - // .. .. .. ==> MASK : 0x00000010U VAL : 0x00000000U - // .. .. .. - EMIT_MASKWRITE(0XF8000100, 0x00000010U ,0x00000000U), - // .. .. .. FINISH: REMOVE PLL BY PASS - // .. .. .. SRCSEL = 0x0 - // .. .. .. ==> 0XF8000120[5:4] = 0x00000000U - // .. .. .. ==> MASK : 0x00000030U VAL : 0x00000000U - // .. .. .. DIVISOR = 0x3 - // .. .. .. ==> 0XF8000120[13:8] = 0x00000003U - // .. .. .. ==> MASK : 0x00003F00U VAL : 0x00000300U - // .. .. .. CPU_6OR4XCLKACT = 0x1 - // .. .. .. ==> 0XF8000120[24:24] = 0x00000001U - // .. .. .. ==> MASK : 0x01000000U VAL : 0x01000000U - // .. .. .. CPU_3OR2XCLKACT = 0x1 - // .. .. .. ==> 0XF8000120[25:25] = 0x00000001U - // .. .. .. ==> MASK : 0x02000000U VAL : 0x02000000U - // .. .. .. CPU_2XCLKACT = 0x1 - // .. .. .. ==> 0XF8000120[26:26] = 0x00000001U - // .. .. .. ==> MASK : 0x04000000U VAL : 0x04000000U - // .. .. .. CPU_1XCLKACT = 0x1 - // .. .. .. ==> 0XF8000120[27:27] = 0x00000001U - // .. .. .. ==> MASK : 0x08000000U VAL : 0x08000000U - // .. .. .. CPU_PERI_CLKACT = 0x1 - // .. .. .. ==> 0XF8000120[28:28] = 0x00000001U - // .. .. .. ==> MASK : 0x10000000U VAL : 0x10000000U - // .. .. .. - EMIT_MASKWRITE(0XF8000120, 0x1F003F30U ,0x1F000300U), - // .. .. FINISH: ARM PLL INIT - // .. .. START: DDR PLL INIT - // .. .. PLL_RES = 0x2 - // .. .. ==> 0XF8000114[7:4] = 0x00000002U - // .. .. ==> MASK : 0x000000F0U VAL : 0x00000020U - // .. .. PLL_CP = 0x2 - // .. .. ==> 0XF8000114[11:8] = 0x00000002U - // .. .. ==> MASK : 0x00000F00U VAL : 0x00000200U - // .. .. LOCK_CNT = 0x12c - // .. .. ==> 0XF8000114[21:12] = 0x0000012CU - // .. .. ==> MASK : 0x003FF000U VAL : 0x0012C000U - // .. .. - EMIT_MASKWRITE(0XF8000114, 0x003FFFF0U ,0x0012C220U), - // .. .. .. START: UPDATE FB_DIV - // .. .. .. PLL_FDIV = 0x20 - // .. .. .. ==> 0XF8000104[18:12] = 0x00000020U - // .. .. .. ==> MASK : 0x0007F000U VAL : 0x00020000U - // .. .. .. - EMIT_MASKWRITE(0XF8000104, 0x0007F000U ,0x00020000U), - // .. .. .. FINISH: UPDATE FB_DIV - // .. .. .. START: BY PASS PLL - // .. .. .. PLL_BYPASS_FORCE = 1 - // .. .. .. ==> 0XF8000104[4:4] = 0x00000001U - // .. .. .. ==> MASK : 0x00000010U VAL : 0x00000010U - // .. .. .. - EMIT_MASKWRITE(0XF8000104, 0x00000010U ,0x00000010U), - // .. .. .. FINISH: BY PASS PLL - // .. .. .. START: ASSERT RESET - // .. .. .. PLL_RESET = 1 - // .. .. .. ==> 0XF8000104[0:0] = 0x00000001U - // .. .. .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. .. .. - EMIT_MASKWRITE(0XF8000104, 0x00000001U ,0x00000001U), - // .. .. .. FINISH: ASSERT RESET - // .. .. .. START: DEASSERT RESET - // .. .. .. PLL_RESET = 0 - // .. .. .. ==> 0XF8000104[0:0] = 0x00000000U - // .. .. .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. .. .. - EMIT_MASKWRITE(0XF8000104, 0x00000001U ,0x00000000U), - // .. .. .. FINISH: DEASSERT RESET - // .. .. .. START: CHECK PLL STATUS - // .. .. .. DDR_PLL_LOCK = 1 - // .. .. .. ==> 0XF800010C[1:1] = 0x00000001U - // .. .. .. ==> MASK : 0x00000002U VAL : 0x00000002U - // .. .. .. - EMIT_MASKPOLL(0XF800010C, 0x00000002U), - // .. .. .. FINISH: CHECK PLL STATUS - // .. .. .. START: REMOVE PLL BY PASS - // .. .. .. PLL_BYPASS_FORCE = 0 - // .. .. .. ==> 0XF8000104[4:4] = 0x00000000U - // .. .. .. ==> MASK : 0x00000010U VAL : 0x00000000U - // .. .. .. - EMIT_MASKWRITE(0XF8000104, 0x00000010U ,0x00000000U), - // .. .. .. FINISH: REMOVE PLL BY PASS - // .. .. .. DDR_3XCLKACT = 0x1 - // .. .. .. ==> 0XF8000124[0:0] = 0x00000001U - // .. .. .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. .. .. DDR_2XCLKACT = 0x1 - // .. .. .. ==> 0XF8000124[1:1] = 0x00000001U - // .. .. .. ==> MASK : 0x00000002U VAL : 0x00000002U - // .. .. .. DDR_3XCLK_DIVISOR = 0x2 - // .. .. .. ==> 0XF8000124[25:20] = 0x00000002U - // .. .. .. ==> MASK : 0x03F00000U VAL : 0x00200000U - // .. .. .. DDR_2XCLK_DIVISOR = 0x3 - // .. .. .. ==> 0XF8000124[31:26] = 0x00000003U - // .. .. .. ==> MASK : 0xFC000000U VAL : 0x0C000000U - // .. .. .. - EMIT_MASKWRITE(0XF8000124, 0xFFF00003U ,0x0C200003U), - // .. .. FINISH: DDR PLL INIT - // .. .. START: IO PLL INIT - // .. .. PLL_RES = 0x4 - // .. .. ==> 0XF8000118[7:4] = 0x00000004U - // .. .. ==> MASK : 0x000000F0U VAL : 0x00000040U - // .. .. PLL_CP = 0x2 - // .. .. ==> 0XF8000118[11:8] = 0x00000002U - // .. .. ==> MASK : 0x00000F00U VAL : 0x00000200U - // .. .. LOCK_CNT = 0xfa - // .. .. ==> 0XF8000118[21:12] = 0x000000FAU - // .. .. ==> MASK : 0x003FF000U VAL : 0x000FA000U - // .. .. - EMIT_MASKWRITE(0XF8000118, 0x003FFFF0U ,0x000FA240U), - // .. .. .. START: UPDATE FB_DIV - // .. .. .. PLL_FDIV = 0x3c - // .. .. .. ==> 0XF8000108[18:12] = 0x0000003CU - // .. .. .. ==> MASK : 0x0007F000U VAL : 0x0003C000U - // .. .. .. - EMIT_MASKWRITE(0XF8000108, 0x0007F000U ,0x0003C000U), - // .. .. .. FINISH: UPDATE FB_DIV - // .. .. .. START: BY PASS PLL - // .. .. .. PLL_BYPASS_FORCE = 1 - // .. .. .. ==> 0XF8000108[4:4] = 0x00000001U - // .. .. .. ==> MASK : 0x00000010U VAL : 0x00000010U - // .. .. .. - EMIT_MASKWRITE(0XF8000108, 0x00000010U ,0x00000010U), - // .. .. .. FINISH: BY PASS PLL - // .. .. .. START: ASSERT RESET - // .. .. .. PLL_RESET = 1 - // .. .. .. ==> 0XF8000108[0:0] = 0x00000001U - // .. .. .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. .. .. - EMIT_MASKWRITE(0XF8000108, 0x00000001U ,0x00000001U), - // .. .. .. FINISH: ASSERT RESET - // .. .. .. START: DEASSERT RESET - // .. .. .. PLL_RESET = 0 - // .. .. .. ==> 0XF8000108[0:0] = 0x00000000U - // .. .. .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. .. .. - EMIT_MASKWRITE(0XF8000108, 0x00000001U ,0x00000000U), - // .. .. .. FINISH: DEASSERT RESET - // .. .. .. START: CHECK PLL STATUS - // .. .. .. IO_PLL_LOCK = 1 - // .. .. .. ==> 0XF800010C[2:2] = 0x00000001U - // .. .. .. ==> MASK : 0x00000004U VAL : 0x00000004U - // .. .. .. - EMIT_MASKPOLL(0XF800010C, 0x00000004U), - // .. .. .. FINISH: CHECK PLL STATUS - // .. .. .. START: REMOVE PLL BY PASS - // .. .. .. PLL_BYPASS_FORCE = 0 - // .. .. .. ==> 0XF8000108[4:4] = 0x00000000U - // .. .. .. ==> MASK : 0x00000010U VAL : 0x00000000U - // .. .. .. - EMIT_MASKWRITE(0XF8000108, 0x00000010U ,0x00000000U), - // .. .. .. FINISH: REMOVE PLL BY PASS - // .. .. FINISH: IO PLL INIT - // .. FINISH: PLL SLCR REGISTERS - // .. START: LOCK IT BACK - // .. LOCK_KEY = 0X767B - // .. ==> 0XF8000004[15:0] = 0x0000767BU - // .. ==> MASK : 0x0000FFFFU VAL : 0x0000767BU - // .. - EMIT_MASKWRITE(0XF8000004, 0x0000FFFFU ,0x0000767BU), - // .. FINISH: LOCK IT BACK - // FINISH: top - // - EMIT_EXIT(), - - // -}; - -unsigned long ps7_clock_init_data_1_0[] = { - // START: top - // .. START: SLCR SETTINGS - // .. UNLOCK_KEY = 0XDF0D - // .. ==> 0XF8000008[15:0] = 0x0000DF0DU - // .. ==> MASK : 0x0000FFFFU VAL : 0x0000DF0DU - // .. - EMIT_MASKWRITE(0XF8000008, 0x0000FFFFU ,0x0000DF0DU), - // .. FINISH: SLCR SETTINGS - // .. START: CLOCK CONTROL SLCR REGISTERS - // .. CLKACT = 0x1 - // .. ==> 0XF8000128[0:0] = 0x00000001U - // .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. DIVISOR0 = 0x23 - // .. ==> 0XF8000128[13:8] = 0x00000023U - // .. ==> MASK : 0x00003F00U VAL : 0x00002300U - // .. DIVISOR1 = 0x3 - // .. ==> 0XF8000128[25:20] = 0x00000003U - // .. ==> MASK : 0x03F00000U VAL : 0x00300000U - // .. - EMIT_MASKWRITE(0XF8000128, 0x03F03F01U ,0x00302301U), - // .. CLKACT = 0x1 - // .. ==> 0XF8000138[0:0] = 0x00000001U - // .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. SRCSEL = 0x0 - // .. ==> 0XF8000138[4:4] = 0x00000000U - // .. ==> MASK : 0x00000010U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000138, 0x00000011U ,0x00000001U), - // .. CLKACT = 0x1 - // .. ==> 0XF8000140[0:0] = 0x00000001U - // .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. SRCSEL = 0x0 - // .. ==> 0XF8000140[6:4] = 0x00000000U - // .. ==> MASK : 0x00000070U VAL : 0x00000000U - // .. DIVISOR = 0x10 - // .. ==> 0XF8000140[13:8] = 0x00000010U - // .. ==> MASK : 0x00003F00U VAL : 0x00001000U - // .. DIVISOR1 = 0x1 - // .. ==> 0XF8000140[25:20] = 0x00000001U - // .. ==> MASK : 0x03F00000U VAL : 0x00100000U - // .. - EMIT_MASKWRITE(0XF8000140, 0x03F03F71U ,0x00101001U), - // .. CLKACT = 0x1 - // .. ==> 0XF800014C[0:0] = 0x00000001U - // .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. SRCSEL = 0x0 - // .. ==> 0XF800014C[5:4] = 0x00000000U - // .. ==> MASK : 0x00000030U VAL : 0x00000000U - // .. DIVISOR = 0xa - // .. ==> 0XF800014C[13:8] = 0x0000000AU - // .. ==> MASK : 0x00003F00U VAL : 0x00000A00U - // .. - EMIT_MASKWRITE(0XF800014C, 0x00003F31U ,0x00000A01U), - // .. CLKACT0 = 0x0 - // .. ==> 0XF8000150[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. CLKACT1 = 0x1 - // .. ==> 0XF8000150[1:1] = 0x00000001U - // .. ==> MASK : 0x00000002U VAL : 0x00000002U - // .. SRCSEL = 0x0 - // .. ==> 0XF8000150[5:4] = 0x00000000U - // .. ==> MASK : 0x00000030U VAL : 0x00000000U - // .. DIVISOR = 0x28 - // .. ==> 0XF8000150[13:8] = 0x00000028U - // .. ==> MASK : 0x00003F00U VAL : 0x00002800U - // .. - EMIT_MASKWRITE(0XF8000150, 0x00003F33U ,0x00002802U), - // .. CLKACT0 = 0x0 - // .. ==> 0XF8000154[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. CLKACT1 = 0x1 - // .. ==> 0XF8000154[1:1] = 0x00000001U - // .. ==> MASK : 0x00000002U VAL : 0x00000002U - // .. SRCSEL = 0x0 - // .. ==> 0XF8000154[5:4] = 0x00000000U - // .. ==> MASK : 0x00000030U VAL : 0x00000000U - // .. DIVISOR = 0x28 - // .. ==> 0XF8000154[13:8] = 0x00000028U - // .. ==> MASK : 0x00003F00U VAL : 0x00002800U - // .. - EMIT_MASKWRITE(0XF8000154, 0x00003F33U ,0x00002802U), - // .. .. START: TRACE CLOCK - // .. .. FINISH: TRACE CLOCK - // .. .. CLKACT = 0x1 - // .. .. ==> 0XF8000168[0:0] = 0x00000001U - // .. .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. .. SRCSEL = 0x0 - // .. .. ==> 0XF8000168[5:4] = 0x00000000U - // .. .. ==> MASK : 0x00000030U VAL : 0x00000000U - // .. .. DIVISOR = 0xa - // .. .. ==> 0XF8000168[13:8] = 0x0000000AU - // .. .. ==> MASK : 0x00003F00U VAL : 0x00000A00U - // .. .. - EMIT_MASKWRITE(0XF8000168, 0x00003F31U ,0x00000A01U), - // .. .. SRCSEL = 0x0 - // .. .. ==> 0XF8000170[5:4] = 0x00000000U - // .. .. ==> MASK : 0x00000030U VAL : 0x00000000U - // .. .. DIVISOR0 = 0x14 - // .. .. ==> 0XF8000170[13:8] = 0x00000014U - // .. .. ==> MASK : 0x00003F00U VAL : 0x00001400U - // .. .. DIVISOR1 = 0x1 - // .. .. ==> 0XF8000170[25:20] = 0x00000001U - // .. .. ==> MASK : 0x03F00000U VAL : 0x00100000U - // .. .. - EMIT_MASKWRITE(0XF8000170, 0x03F03F30U ,0x00101400U), - // .. .. SRCSEL = 0x0 - // .. .. ==> 0XF8000180[5:4] = 0x00000000U - // .. .. ==> MASK : 0x00000030U VAL : 0x00000000U - // .. .. DIVISOR0 = 0x14 - // .. .. ==> 0XF8000180[13:8] = 0x00000014U - // .. .. ==> MASK : 0x00003F00U VAL : 0x00001400U - // .. .. DIVISOR1 = 0x1 - // .. .. ==> 0XF8000180[25:20] = 0x00000001U - // .. .. ==> MASK : 0x03F00000U VAL : 0x00100000U - // .. .. - EMIT_MASKWRITE(0XF8000180, 0x03F03F30U ,0x00101400U), - // .. .. SRCSEL = 0x0 - // .. .. ==> 0XF8000190[5:4] = 0x00000000U - // .. .. ==> MASK : 0x00000030U VAL : 0x00000000U - // .. .. DIVISOR0 = 0x3c - // .. .. ==> 0XF8000190[13:8] = 0x0000003CU - // .. .. ==> MASK : 0x00003F00U VAL : 0x00003C00U - // .. .. DIVISOR1 = 0x1 - // .. .. ==> 0XF8000190[25:20] = 0x00000001U - // .. .. ==> MASK : 0x03F00000U VAL : 0x00100000U - // .. .. - EMIT_MASKWRITE(0XF8000190, 0x03F03F30U ,0x00103C00U), - // .. .. SRCSEL = 0x0 - // .. .. ==> 0XF80001A0[5:4] = 0x00000000U - // .. .. ==> MASK : 0x00000030U VAL : 0x00000000U - // .. .. DIVISOR0 = 0x28 - // .. .. ==> 0XF80001A0[13:8] = 0x00000028U - // .. .. ==> MASK : 0x00003F00U VAL : 0x00002800U - // .. .. DIVISOR1 = 0x1 - // .. .. ==> 0XF80001A0[25:20] = 0x00000001U - // .. .. ==> MASK : 0x03F00000U VAL : 0x00100000U - // .. .. - EMIT_MASKWRITE(0XF80001A0, 0x03F03F30U ,0x00102800U), - // .. .. CLK_621_TRUE = 0x1 - // .. .. ==> 0XF80001C4[0:0] = 0x00000001U - // .. .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. .. - EMIT_MASKWRITE(0XF80001C4, 0x00000001U ,0x00000001U), - // .. .. DMA_CPU_2XCLKACT = 0x1 - // .. .. ==> 0XF800012C[0:0] = 0x00000001U - // .. .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. .. USB0_CPU_1XCLKACT = 0x1 - // .. .. ==> 0XF800012C[2:2] = 0x00000001U - // .. .. ==> MASK : 0x00000004U VAL : 0x00000004U - // .. .. USB1_CPU_1XCLKACT = 0x1 - // .. .. ==> 0XF800012C[3:3] = 0x00000001U - // .. .. ==> MASK : 0x00000008U VAL : 0x00000008U - // .. .. GEM0_CPU_1XCLKACT = 0x1 - // .. .. ==> 0XF800012C[6:6] = 0x00000001U - // .. .. ==> MASK : 0x00000040U VAL : 0x00000040U - // .. .. GEM1_CPU_1XCLKACT = 0x0 - // .. .. ==> 0XF800012C[7:7] = 0x00000000U - // .. .. ==> MASK : 0x00000080U VAL : 0x00000000U - // .. .. SDI0_CPU_1XCLKACT = 0x0 - // .. .. ==> 0XF800012C[10:10] = 0x00000000U - // .. .. ==> MASK : 0x00000400U VAL : 0x00000000U - // .. .. SDI1_CPU_1XCLKACT = 0x1 - // .. .. ==> 0XF800012C[11:11] = 0x00000001U - // .. .. ==> MASK : 0x00000800U VAL : 0x00000800U - // .. .. SPI0_CPU_1XCLKACT = 0x0 - // .. .. ==> 0XF800012C[14:14] = 0x00000000U - // .. .. ==> MASK : 0x00004000U VAL : 0x00000000U - // .. .. SPI1_CPU_1XCLKACT = 0x0 - // .. .. ==> 0XF800012C[15:15] = 0x00000000U - // .. .. ==> MASK : 0x00008000U VAL : 0x00000000U - // .. .. CAN0_CPU_1XCLKACT = 0x0 - // .. .. ==> 0XF800012C[16:16] = 0x00000000U - // .. .. ==> MASK : 0x00010000U VAL : 0x00000000U - // .. .. CAN1_CPU_1XCLKACT = 0x0 - // .. .. ==> 0XF800012C[17:17] = 0x00000000U - // .. .. ==> MASK : 0x00020000U VAL : 0x00000000U - // .. .. I2C0_CPU_1XCLKACT = 0x1 - // .. .. ==> 0XF800012C[18:18] = 0x00000001U - // .. .. ==> MASK : 0x00040000U VAL : 0x00040000U - // .. .. I2C1_CPU_1XCLKACT = 0x1 - // .. .. ==> 0XF800012C[19:19] = 0x00000001U - // .. .. ==> MASK : 0x00080000U VAL : 0x00080000U - // .. .. UART0_CPU_1XCLKACT = 0x0 - // .. .. ==> 0XF800012C[20:20] = 0x00000000U - // .. .. ==> MASK : 0x00100000U VAL : 0x00000000U - // .. .. UART1_CPU_1XCLKACT = 0x1 - // .. .. ==> 0XF800012C[21:21] = 0x00000001U - // .. .. ==> MASK : 0x00200000U VAL : 0x00200000U - // .. .. GPIO_CPU_1XCLKACT = 0x1 - // .. .. ==> 0XF800012C[22:22] = 0x00000001U - // .. .. ==> MASK : 0x00400000U VAL : 0x00400000U - // .. .. LQSPI_CPU_1XCLKACT = 0x1 - // .. .. ==> 0XF800012C[23:23] = 0x00000001U - // .. .. ==> MASK : 0x00800000U VAL : 0x00800000U - // .. .. SMC_CPU_1XCLKACT = 0x1 - // .. .. ==> 0XF800012C[24:24] = 0x00000001U - // .. .. ==> MASK : 0x01000000U VAL : 0x01000000U - // .. .. - EMIT_MASKWRITE(0XF800012C, 0x01FFCCCDU ,0x01EC084DU), - // .. FINISH: CLOCK CONTROL SLCR REGISTERS - // .. START: THIS SHOULD BE BLANK - // .. FINISH: THIS SHOULD BE BLANK - // .. START: LOCK IT BACK - // .. LOCK_KEY = 0X767B - // .. ==> 0XF8000004[15:0] = 0x0000767BU - // .. ==> MASK : 0x0000FFFFU VAL : 0x0000767BU - // .. - EMIT_MASKWRITE(0XF8000004, 0x0000FFFFU ,0x0000767BU), - // .. FINISH: LOCK IT BACK - // FINISH: top - // - EMIT_EXIT(), - - // -}; - -unsigned long ps7_ddr_init_data_1_0[] = { - // START: top - // .. START: DDR INITIALIZATION - // .. .. START: LOCK DDR - // .. .. reg_ddrc_soft_rstb = 0 - // .. .. ==> 0XF8006000[0:0] = 0x00000000U - // .. .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. .. reg_ddrc_powerdown_en = 0x0 - // .. .. ==> 0XF8006000[1:1] = 0x00000000U - // .. .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. .. reg_ddrc_data_bus_width = 0x0 - // .. .. ==> 0XF8006000[3:2] = 0x00000000U - // .. .. ==> MASK : 0x0000000CU VAL : 0x00000000U - // .. .. reg_ddrc_burst8_refresh = 0x0 - // .. .. ==> 0XF8006000[6:4] = 0x00000000U - // .. .. ==> MASK : 0x00000070U VAL : 0x00000000U - // .. .. reg_ddrc_rdwr_idle_gap = 0x1 - // .. .. ==> 0XF8006000[13:7] = 0x00000001U - // .. .. ==> MASK : 0x00003F80U VAL : 0x00000080U - // .. .. reg_ddrc_dis_rd_bypass = 0x0 - // .. .. ==> 0XF8006000[14:14] = 0x00000000U - // .. .. ==> MASK : 0x00004000U VAL : 0x00000000U - // .. .. reg_ddrc_dis_act_bypass = 0x0 - // .. .. ==> 0XF8006000[15:15] = 0x00000000U - // .. .. ==> MASK : 0x00008000U VAL : 0x00000000U - // .. .. reg_ddrc_dis_auto_refresh = 0x0 - // .. .. ==> 0XF8006000[16:16] = 0x00000000U - // .. .. ==> MASK : 0x00010000U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006000, 0x0001FFFFU ,0x00000080U), - // .. .. FINISH: LOCK DDR - // .. .. reg_ddrc_t_rfc_nom_x32 = 0x81 - // .. .. ==> 0XF8006004[11:0] = 0x00000081U - // .. .. ==> MASK : 0x00000FFFU VAL : 0x00000081U - // .. .. reg_ddrc_active_ranks = 0x1 - // .. .. ==> 0XF8006004[13:12] = 0x00000001U - // .. .. ==> MASK : 0x00003000U VAL : 0x00001000U - // .. .. reg_ddrc_addrmap_cs_bit0 = 0x0 - // .. .. ==> 0XF8006004[18:14] = 0x00000000U - // .. .. ==> MASK : 0x0007C000U VAL : 0x00000000U - // .. .. reg_ddrc_wr_odt_block = 0x1 - // .. .. ==> 0XF8006004[20:19] = 0x00000001U - // .. .. ==> MASK : 0x00180000U VAL : 0x00080000U - // .. .. reg_ddrc_diff_rank_rd_2cycle_gap = 0x0 - // .. .. ==> 0XF8006004[21:21] = 0x00000000U - // .. .. ==> MASK : 0x00200000U VAL : 0x00000000U - // .. .. reg_ddrc_addrmap_cs_bit1 = 0x0 - // .. .. ==> 0XF8006004[26:22] = 0x00000000U - // .. .. ==> MASK : 0x07C00000U VAL : 0x00000000U - // .. .. reg_ddrc_addrmap_open_bank = 0x0 - // .. .. ==> 0XF8006004[27:27] = 0x00000000U - // .. .. ==> MASK : 0x08000000U VAL : 0x00000000U - // .. .. reg_ddrc_addrmap_4bank_ram = 0x0 - // .. .. ==> 0XF8006004[28:28] = 0x00000000U - // .. .. ==> MASK : 0x10000000U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006004, 0x1FFFFFFFU ,0x00081081U), - // .. .. reg_ddrc_hpr_min_non_critical_x32 = 0xf - // .. .. ==> 0XF8006008[10:0] = 0x0000000FU - // .. .. ==> MASK : 0x000007FFU VAL : 0x0000000FU - // .. .. reg_ddrc_hpr_max_starve_x32 = 0xf - // .. .. ==> 0XF8006008[21:11] = 0x0000000FU - // .. .. ==> MASK : 0x003FF800U VAL : 0x00007800U - // .. .. reg_ddrc_hpr_xact_run_length = 0xf - // .. .. ==> 0XF8006008[25:22] = 0x0000000FU - // .. .. ==> MASK : 0x03C00000U VAL : 0x03C00000U - // .. .. - EMIT_MASKWRITE(0XF8006008, 0x03FFFFFFU ,0x03C0780FU), - // .. .. reg_ddrc_lpr_min_non_critical_x32 = 0x1 - // .. .. ==> 0XF800600C[10:0] = 0x00000001U - // .. .. ==> MASK : 0x000007FFU VAL : 0x00000001U - // .. .. reg_ddrc_lpr_max_starve_x32 = 0x2 - // .. .. ==> 0XF800600C[21:11] = 0x00000002U - // .. .. ==> MASK : 0x003FF800U VAL : 0x00001000U - // .. .. reg_ddrc_lpr_xact_run_length = 0x8 - // .. .. ==> 0XF800600C[25:22] = 0x00000008U - // .. .. ==> MASK : 0x03C00000U VAL : 0x02000000U - // .. .. - EMIT_MASKWRITE(0XF800600C, 0x03FFFFFFU ,0x02001001U), - // .. .. reg_ddrc_w_min_non_critical_x32 = 0x1 - // .. .. ==> 0XF8006010[10:0] = 0x00000001U - // .. .. ==> MASK : 0x000007FFU VAL : 0x00000001U - // .. .. reg_ddrc_w_xact_run_length = 0x8 - // .. .. ==> 0XF8006010[14:11] = 0x00000008U - // .. .. ==> MASK : 0x00007800U VAL : 0x00004000U - // .. .. reg_ddrc_w_max_starve_x32 = 0x2 - // .. .. ==> 0XF8006010[25:15] = 0x00000002U - // .. .. ==> MASK : 0x03FF8000U VAL : 0x00010000U - // .. .. - EMIT_MASKWRITE(0XF8006010, 0x03FFFFFFU ,0x00014001U), - // .. .. reg_ddrc_t_rc = 0x1a - // .. .. ==> 0XF8006014[5:0] = 0x0000001AU - // .. .. ==> MASK : 0x0000003FU VAL : 0x0000001AU - // .. .. reg_ddrc_t_rfc_min = 0xa0 - // .. .. ==> 0XF8006014[13:6] = 0x000000A0U - // .. .. ==> MASK : 0x00003FC0U VAL : 0x00002800U - // .. .. reg_ddrc_post_selfref_gap_x32 = 0x10 - // .. .. ==> 0XF8006014[20:14] = 0x00000010U - // .. .. ==> MASK : 0x001FC000U VAL : 0x00040000U - // .. .. - EMIT_MASKWRITE(0XF8006014, 0x001FFFFFU ,0x0004281AU), - // .. .. reg_ddrc_wr2pre = 0x12 - // .. .. ==> 0XF8006018[4:0] = 0x00000012U - // .. .. ==> MASK : 0x0000001FU VAL : 0x00000012U - // .. .. reg_ddrc_powerdown_to_x32 = 0x6 - // .. .. ==> 0XF8006018[9:5] = 0x00000006U - // .. .. ==> MASK : 0x000003E0U VAL : 0x000000C0U - // .. .. reg_ddrc_t_faw = 0x16 - // .. .. ==> 0XF8006018[15:10] = 0x00000016U - // .. .. ==> MASK : 0x0000FC00U VAL : 0x00005800U - // .. .. reg_ddrc_t_ras_max = 0x24 - // .. .. ==> 0XF8006018[21:16] = 0x00000024U - // .. .. ==> MASK : 0x003F0000U VAL : 0x00240000U - // .. .. reg_ddrc_t_ras_min = 0x13 - // .. .. ==> 0XF8006018[26:22] = 0x00000013U - // .. .. ==> MASK : 0x07C00000U VAL : 0x04C00000U - // .. .. reg_ddrc_t_cke = 0x4 - // .. .. ==> 0XF8006018[31:28] = 0x00000004U - // .. .. ==> MASK : 0xF0000000U VAL : 0x40000000U - // .. .. - EMIT_MASKWRITE(0XF8006018, 0xF7FFFFFFU ,0x44E458D2U), - // .. .. reg_ddrc_write_latency = 0x5 - // .. .. ==> 0XF800601C[4:0] = 0x00000005U - // .. .. ==> MASK : 0x0000001FU VAL : 0x00000005U - // .. .. reg_ddrc_rd2wr = 0x7 - // .. .. ==> 0XF800601C[9:5] = 0x00000007U - // .. .. ==> MASK : 0x000003E0U VAL : 0x000000E0U - // .. .. reg_ddrc_wr2rd = 0xe - // .. .. ==> 0XF800601C[14:10] = 0x0000000EU - // .. .. ==> MASK : 0x00007C00U VAL : 0x00003800U - // .. .. reg_ddrc_t_xp = 0x4 - // .. .. ==> 0XF800601C[19:15] = 0x00000004U - // .. .. ==> MASK : 0x000F8000U VAL : 0x00020000U - // .. .. reg_ddrc_pad_pd = 0x0 - // .. .. ==> 0XF800601C[22:20] = 0x00000000U - // .. .. ==> MASK : 0x00700000U VAL : 0x00000000U - // .. .. reg_ddrc_rd2pre = 0x4 - // .. .. ==> 0XF800601C[27:23] = 0x00000004U - // .. .. ==> MASK : 0x0F800000U VAL : 0x02000000U - // .. .. reg_ddrc_t_rcd = 0x7 - // .. .. ==> 0XF800601C[31:28] = 0x00000007U - // .. .. ==> MASK : 0xF0000000U VAL : 0x70000000U - // .. .. - EMIT_MASKWRITE(0XF800601C, 0xFFFFFFFFU ,0x720238E5U), - // .. .. reg_ddrc_t_ccd = 0x4 - // .. .. ==> 0XF8006020[4:2] = 0x00000004U - // .. .. ==> MASK : 0x0000001CU VAL : 0x00000010U - // .. .. reg_ddrc_t_rrd = 0x6 - // .. .. ==> 0XF8006020[7:5] = 0x00000006U - // .. .. ==> MASK : 0x000000E0U VAL : 0x000000C0U - // .. .. reg_ddrc_refresh_margin = 0x2 - // .. .. ==> 0XF8006020[11:8] = 0x00000002U - // .. .. ==> MASK : 0x00000F00U VAL : 0x00000200U - // .. .. reg_ddrc_t_rp = 0x7 - // .. .. ==> 0XF8006020[15:12] = 0x00000007U - // .. .. ==> MASK : 0x0000F000U VAL : 0x00007000U - // .. .. reg_ddrc_refresh_to_x32 = 0x8 - // .. .. ==> 0XF8006020[20:16] = 0x00000008U - // .. .. ==> MASK : 0x001F0000U VAL : 0x00080000U - // .. .. reg_ddrc_sdram = 0x1 - // .. .. ==> 0XF8006020[21:21] = 0x00000001U - // .. .. ==> MASK : 0x00200000U VAL : 0x00200000U - // .. .. reg_ddrc_mobile = 0x0 - // .. .. ==> 0XF8006020[22:22] = 0x00000000U - // .. .. ==> MASK : 0x00400000U VAL : 0x00000000U - // .. .. reg_ddrc_clock_stop_en = 0x0 - // .. .. ==> 0XF8006020[23:23] = 0x00000000U - // .. .. ==> MASK : 0x00800000U VAL : 0x00000000U - // .. .. reg_ddrc_read_latency = 0x7 - // .. .. ==> 0XF8006020[28:24] = 0x00000007U - // .. .. ==> MASK : 0x1F000000U VAL : 0x07000000U - // .. .. reg_phy_mode_ddr1_ddr2 = 0x1 - // .. .. ==> 0XF8006020[29:29] = 0x00000001U - // .. .. ==> MASK : 0x20000000U VAL : 0x20000000U - // .. .. reg_ddrc_dis_pad_pd = 0x0 - // .. .. ==> 0XF8006020[30:30] = 0x00000000U - // .. .. ==> MASK : 0x40000000U VAL : 0x00000000U - // .. .. reg_ddrc_loopback = 0x0 - // .. .. ==> 0XF8006020[31:31] = 0x00000000U - // .. .. ==> MASK : 0x80000000U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006020, 0xFFFFFFFCU ,0x272872D0U), - // .. .. reg_ddrc_en_2t_timing_mode = 0x0 - // .. .. ==> 0XF8006024[0:0] = 0x00000000U - // .. .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. .. reg_ddrc_prefer_write = 0x0 - // .. .. ==> 0XF8006024[1:1] = 0x00000000U - // .. .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. .. reg_ddrc_max_rank_rd = 0xf - // .. .. ==> 0XF8006024[5:2] = 0x0000000FU - // .. .. ==> MASK : 0x0000003CU VAL : 0x0000003CU - // .. .. reg_ddrc_mr_wr = 0x0 - // .. .. ==> 0XF8006024[6:6] = 0x00000000U - // .. .. ==> MASK : 0x00000040U VAL : 0x00000000U - // .. .. reg_ddrc_mr_addr = 0x0 - // .. .. ==> 0XF8006024[8:7] = 0x00000000U - // .. .. ==> MASK : 0x00000180U VAL : 0x00000000U - // .. .. reg_ddrc_mr_data = 0x0 - // .. .. ==> 0XF8006024[24:9] = 0x00000000U - // .. .. ==> MASK : 0x01FFFE00U VAL : 0x00000000U - // .. .. ddrc_reg_mr_wr_busy = 0x0 - // .. .. ==> 0XF8006024[25:25] = 0x00000000U - // .. .. ==> MASK : 0x02000000U VAL : 0x00000000U - // .. .. reg_ddrc_mr_type = 0x0 - // .. .. ==> 0XF8006024[26:26] = 0x00000000U - // .. .. ==> MASK : 0x04000000U VAL : 0x00000000U - // .. .. reg_ddrc_mr_rdata_valid = 0x0 - // .. .. ==> 0XF8006024[27:27] = 0x00000000U - // .. .. ==> MASK : 0x08000000U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006024, 0x0FFFFFFFU ,0x0000003CU), - // .. .. reg_ddrc_final_wait_x32 = 0x7 - // .. .. ==> 0XF8006028[6:0] = 0x00000007U - // .. .. ==> MASK : 0x0000007FU VAL : 0x00000007U - // .. .. reg_ddrc_pre_ocd_x32 = 0x0 - // .. .. ==> 0XF8006028[10:7] = 0x00000000U - // .. .. ==> MASK : 0x00000780U VAL : 0x00000000U - // .. .. reg_ddrc_t_mrd = 0x4 - // .. .. ==> 0XF8006028[13:11] = 0x00000004U - // .. .. ==> MASK : 0x00003800U VAL : 0x00002000U - // .. .. - EMIT_MASKWRITE(0XF8006028, 0x00003FFFU ,0x00002007U), - // .. .. reg_ddrc_emr2 = 0x8 - // .. .. ==> 0XF800602C[15:0] = 0x00000008U - // .. .. ==> MASK : 0x0000FFFFU VAL : 0x00000008U - // .. .. reg_ddrc_emr3 = 0x0 - // .. .. ==> 0XF800602C[31:16] = 0x00000000U - // .. .. ==> MASK : 0xFFFF0000U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF800602C, 0xFFFFFFFFU ,0x00000008U), - // .. .. reg_ddrc_mr = 0x930 - // .. .. ==> 0XF8006030[15:0] = 0x00000930U - // .. .. ==> MASK : 0x0000FFFFU VAL : 0x00000930U - // .. .. reg_ddrc_emr = 0x4 - // .. .. ==> 0XF8006030[31:16] = 0x00000004U - // .. .. ==> MASK : 0xFFFF0000U VAL : 0x00040000U - // .. .. - EMIT_MASKWRITE(0XF8006030, 0xFFFFFFFFU ,0x00040930U), - // .. .. reg_ddrc_burst_rdwr = 0x4 - // .. .. ==> 0XF8006034[3:0] = 0x00000004U - // .. .. ==> MASK : 0x0000000FU VAL : 0x00000004U - // .. .. reg_ddrc_pre_cke_x1024 = 0x105 - // .. .. ==> 0XF8006034[13:4] = 0x00000105U - // .. .. ==> MASK : 0x00003FF0U VAL : 0x00001050U - // .. .. reg_ddrc_post_cke_x1024 = 0x1 - // .. .. ==> 0XF8006034[25:16] = 0x00000001U - // .. .. ==> MASK : 0x03FF0000U VAL : 0x00010000U - // .. .. reg_ddrc_burstchop = 0x0 - // .. .. ==> 0XF8006034[28:28] = 0x00000000U - // .. .. ==> MASK : 0x10000000U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006034, 0x13FF3FFFU ,0x00011054U), - // .. .. reg_ddrc_force_low_pri_n = 0x0 - // .. .. ==> 0XF8006038[0:0] = 0x00000000U - // .. .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. .. reg_ddrc_dis_dq = 0x0 - // .. .. ==> 0XF8006038[1:1] = 0x00000000U - // .. .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. .. reg_phy_debug_mode = 0x0 - // .. .. ==> 0XF8006038[6:6] = 0x00000000U - // .. .. ==> MASK : 0x00000040U VAL : 0x00000000U - // .. .. reg_phy_wr_level_start = 0x0 - // .. .. ==> 0XF8006038[7:7] = 0x00000000U - // .. .. ==> MASK : 0x00000080U VAL : 0x00000000U - // .. .. reg_phy_rd_level_start = 0x0 - // .. .. ==> 0XF8006038[8:8] = 0x00000000U - // .. .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. .. reg_phy_dq0_wait_t = 0x0 - // .. .. ==> 0XF8006038[12:9] = 0x00000000U - // .. .. ==> MASK : 0x00001E00U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006038, 0x00001FC3U ,0x00000000U), - // .. .. reg_ddrc_addrmap_bank_b0 = 0x7 - // .. .. ==> 0XF800603C[3:0] = 0x00000007U - // .. .. ==> MASK : 0x0000000FU VAL : 0x00000007U - // .. .. reg_ddrc_addrmap_bank_b1 = 0x7 - // .. .. ==> 0XF800603C[7:4] = 0x00000007U - // .. .. ==> MASK : 0x000000F0U VAL : 0x00000070U - // .. .. reg_ddrc_addrmap_bank_b2 = 0x7 - // .. .. ==> 0XF800603C[11:8] = 0x00000007U - // .. .. ==> MASK : 0x00000F00U VAL : 0x00000700U - // .. .. reg_ddrc_addrmap_col_b5 = 0x0 - // .. .. ==> 0XF800603C[15:12] = 0x00000000U - // .. .. ==> MASK : 0x0000F000U VAL : 0x00000000U - // .. .. reg_ddrc_addrmap_col_b6 = 0x0 - // .. .. ==> 0XF800603C[19:16] = 0x00000000U - // .. .. ==> MASK : 0x000F0000U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF800603C, 0x000FFFFFU ,0x00000777U), - // .. .. reg_ddrc_addrmap_col_b2 = 0x0 - // .. .. ==> 0XF8006040[3:0] = 0x00000000U - // .. .. ==> MASK : 0x0000000FU VAL : 0x00000000U - // .. .. reg_ddrc_addrmap_col_b3 = 0x0 - // .. .. ==> 0XF8006040[7:4] = 0x00000000U - // .. .. ==> MASK : 0x000000F0U VAL : 0x00000000U - // .. .. reg_ddrc_addrmap_col_b4 = 0x0 - // .. .. ==> 0XF8006040[11:8] = 0x00000000U - // .. .. ==> MASK : 0x00000F00U VAL : 0x00000000U - // .. .. reg_ddrc_addrmap_col_b7 = 0x0 - // .. .. ==> 0XF8006040[15:12] = 0x00000000U - // .. .. ==> MASK : 0x0000F000U VAL : 0x00000000U - // .. .. reg_ddrc_addrmap_col_b8 = 0x0 - // .. .. ==> 0XF8006040[19:16] = 0x00000000U - // .. .. ==> MASK : 0x000F0000U VAL : 0x00000000U - // .. .. reg_ddrc_addrmap_col_b9 = 0xf - // .. .. ==> 0XF8006040[23:20] = 0x0000000FU - // .. .. ==> MASK : 0x00F00000U VAL : 0x00F00000U - // .. .. reg_ddrc_addrmap_col_b10 = 0xf - // .. .. ==> 0XF8006040[27:24] = 0x0000000FU - // .. .. ==> MASK : 0x0F000000U VAL : 0x0F000000U - // .. .. reg_ddrc_addrmap_col_b11 = 0xf - // .. .. ==> 0XF8006040[31:28] = 0x0000000FU - // .. .. ==> MASK : 0xF0000000U VAL : 0xF0000000U - // .. .. - EMIT_MASKWRITE(0XF8006040, 0xFFFFFFFFU ,0xFFF00000U), - // .. .. reg_ddrc_addrmap_row_b0 = 0x6 - // .. .. ==> 0XF8006044[3:0] = 0x00000006U - // .. .. ==> MASK : 0x0000000FU VAL : 0x00000006U - // .. .. reg_ddrc_addrmap_row_b1 = 0x6 - // .. .. ==> 0XF8006044[7:4] = 0x00000006U - // .. .. ==> MASK : 0x000000F0U VAL : 0x00000060U - // .. .. reg_ddrc_addrmap_row_b2_11 = 0x6 - // .. .. ==> 0XF8006044[11:8] = 0x00000006U - // .. .. ==> MASK : 0x00000F00U VAL : 0x00000600U - // .. .. reg_ddrc_addrmap_row_b12 = 0x6 - // .. .. ==> 0XF8006044[15:12] = 0x00000006U - // .. .. ==> MASK : 0x0000F000U VAL : 0x00006000U - // .. .. reg_ddrc_addrmap_row_b13 = 0x6 - // .. .. ==> 0XF8006044[19:16] = 0x00000006U - // .. .. ==> MASK : 0x000F0000U VAL : 0x00060000U - // .. .. reg_ddrc_addrmap_row_b14 = 0x6 - // .. .. ==> 0XF8006044[23:20] = 0x00000006U - // .. .. ==> MASK : 0x00F00000U VAL : 0x00600000U - // .. .. reg_ddrc_addrmap_row_b15 = 0xf - // .. .. ==> 0XF8006044[27:24] = 0x0000000FU - // .. .. ==> MASK : 0x0F000000U VAL : 0x0F000000U - // .. .. - EMIT_MASKWRITE(0XF8006044, 0x0FFFFFFFU ,0x0F666666U), - // .. .. reg_ddrc_rank0_rd_odt = 0x0 - // .. .. ==> 0XF8006048[2:0] = 0x00000000U - // .. .. ==> MASK : 0x00000007U VAL : 0x00000000U - // .. .. reg_ddrc_rank0_wr_odt = 0x1 - // .. .. ==> 0XF8006048[5:3] = 0x00000001U - // .. .. ==> MASK : 0x00000038U VAL : 0x00000008U - // .. .. reg_ddrc_rank1_rd_odt = 0x1 - // .. .. ==> 0XF8006048[8:6] = 0x00000001U - // .. .. ==> MASK : 0x000001C0U VAL : 0x00000040U - // .. .. reg_ddrc_rank1_wr_odt = 0x1 - // .. .. ==> 0XF8006048[11:9] = 0x00000001U - // .. .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. .. reg_phy_rd_local_odt = 0x0 - // .. .. ==> 0XF8006048[13:12] = 0x00000000U - // .. .. ==> MASK : 0x00003000U VAL : 0x00000000U - // .. .. reg_phy_wr_local_odt = 0x3 - // .. .. ==> 0XF8006048[15:14] = 0x00000003U - // .. .. ==> MASK : 0x0000C000U VAL : 0x0000C000U - // .. .. reg_phy_idle_local_odt = 0x3 - // .. .. ==> 0XF8006048[17:16] = 0x00000003U - // .. .. ==> MASK : 0x00030000U VAL : 0x00030000U - // .. .. reg_ddrc_rank2_rd_odt = 0x0 - // .. .. ==> 0XF8006048[20:18] = 0x00000000U - // .. .. ==> MASK : 0x001C0000U VAL : 0x00000000U - // .. .. reg_ddrc_rank2_wr_odt = 0x0 - // .. .. ==> 0XF8006048[23:21] = 0x00000000U - // .. .. ==> MASK : 0x00E00000U VAL : 0x00000000U - // .. .. reg_ddrc_rank3_rd_odt = 0x0 - // .. .. ==> 0XF8006048[26:24] = 0x00000000U - // .. .. ==> MASK : 0x07000000U VAL : 0x00000000U - // .. .. reg_ddrc_rank3_wr_odt = 0x0 - // .. .. ==> 0XF8006048[29:27] = 0x00000000U - // .. .. ==> MASK : 0x38000000U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006048, 0x3FFFFFFFU ,0x0003C248U), - // .. .. reg_phy_rd_cmd_to_data = 0x0 - // .. .. ==> 0XF8006050[3:0] = 0x00000000U - // .. .. ==> MASK : 0x0000000FU VAL : 0x00000000U - // .. .. reg_phy_wr_cmd_to_data = 0x0 - // .. .. ==> 0XF8006050[7:4] = 0x00000000U - // .. .. ==> MASK : 0x000000F0U VAL : 0x00000000U - // .. .. reg_phy_rdc_we_to_re_delay = 0x8 - // .. .. ==> 0XF8006050[11:8] = 0x00000008U - // .. .. ==> MASK : 0x00000F00U VAL : 0x00000800U - // .. .. reg_phy_rdc_fifo_rst_disable = 0x0 - // .. .. ==> 0XF8006050[15:15] = 0x00000000U - // .. .. ==> MASK : 0x00008000U VAL : 0x00000000U - // .. .. reg_phy_use_fixed_re = 0x1 - // .. .. ==> 0XF8006050[16:16] = 0x00000001U - // .. .. ==> MASK : 0x00010000U VAL : 0x00010000U - // .. .. reg_phy_rdc_fifo_rst_err_cnt_clr = 0x0 - // .. .. ==> 0XF8006050[17:17] = 0x00000000U - // .. .. ==> MASK : 0x00020000U VAL : 0x00000000U - // .. .. reg_phy_dis_phy_ctrl_rstn = 0x0 - // .. .. ==> 0XF8006050[18:18] = 0x00000000U - // .. .. ==> MASK : 0x00040000U VAL : 0x00000000U - // .. .. reg_phy_clk_stall_level = 0x0 - // .. .. ==> 0XF8006050[19:19] = 0x00000000U - // .. .. ==> MASK : 0x00080000U VAL : 0x00000000U - // .. .. reg_phy_gatelvl_num_of_dq0 = 0x7 - // .. .. ==> 0XF8006050[27:24] = 0x00000007U - // .. .. ==> MASK : 0x0F000000U VAL : 0x07000000U - // .. .. reg_phy_wrlvl_num_of_dq0 = 0x7 - // .. .. ==> 0XF8006050[31:28] = 0x00000007U - // .. .. ==> MASK : 0xF0000000U VAL : 0x70000000U - // .. .. - EMIT_MASKWRITE(0XF8006050, 0xFF0F8FFFU ,0x77010800U), - // .. .. reg_ddrc_dll_calib_to_min_x1024 = 0x1 - // .. .. ==> 0XF8006058[7:0] = 0x00000001U - // .. .. ==> MASK : 0x000000FFU VAL : 0x00000001U - // .. .. reg_ddrc_dll_calib_to_max_x1024 = 0x1 - // .. .. ==> 0XF8006058[15:8] = 0x00000001U - // .. .. ==> MASK : 0x0000FF00U VAL : 0x00000100U - // .. .. reg_ddrc_dis_dll_calib = 0x0 - // .. .. ==> 0XF8006058[16:16] = 0x00000000U - // .. .. ==> MASK : 0x00010000U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006058, 0x0001FFFFU ,0x00000101U), - // .. .. reg_ddrc_rd_odt_delay = 0x3 - // .. .. ==> 0XF800605C[3:0] = 0x00000003U - // .. .. ==> MASK : 0x0000000FU VAL : 0x00000003U - // .. .. reg_ddrc_wr_odt_delay = 0x0 - // .. .. ==> 0XF800605C[7:4] = 0x00000000U - // .. .. ==> MASK : 0x000000F0U VAL : 0x00000000U - // .. .. reg_ddrc_rd_odt_hold = 0x0 - // .. .. ==> 0XF800605C[11:8] = 0x00000000U - // .. .. ==> MASK : 0x00000F00U VAL : 0x00000000U - // .. .. reg_ddrc_wr_odt_hold = 0x5 - // .. .. ==> 0XF800605C[15:12] = 0x00000005U - // .. .. ==> MASK : 0x0000F000U VAL : 0x00005000U - // .. .. - EMIT_MASKWRITE(0XF800605C, 0x0000FFFFU ,0x00005003U), - // .. .. reg_ddrc_pageclose = 0x0 - // .. .. ==> 0XF8006060[0:0] = 0x00000000U - // .. .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. .. reg_ddrc_lpr_num_entries = 0x1f - // .. .. ==> 0XF8006060[6:1] = 0x0000001FU - // .. .. ==> MASK : 0x0000007EU VAL : 0x0000003EU - // .. .. reg_ddrc_auto_pre_en = 0x0 - // .. .. ==> 0XF8006060[7:7] = 0x00000000U - // .. .. ==> MASK : 0x00000080U VAL : 0x00000000U - // .. .. reg_ddrc_refresh_update_level = 0x0 - // .. .. ==> 0XF8006060[8:8] = 0x00000000U - // .. .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. .. reg_ddrc_dis_wc = 0x0 - // .. .. ==> 0XF8006060[9:9] = 0x00000000U - // .. .. ==> MASK : 0x00000200U VAL : 0x00000000U - // .. .. reg_ddrc_dis_collision_page_opt = 0x0 - // .. .. ==> 0XF8006060[10:10] = 0x00000000U - // .. .. ==> MASK : 0x00000400U VAL : 0x00000000U - // .. .. reg_ddrc_selfref_en = 0x0 - // .. .. ==> 0XF8006060[12:12] = 0x00000000U - // .. .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006060, 0x000017FFU ,0x0000003EU), - // .. .. reg_ddrc_go2critical_hysteresis = 0x0 - // .. .. ==> 0XF8006064[12:5] = 0x00000000U - // .. .. ==> MASK : 0x00001FE0U VAL : 0x00000000U - // .. .. reg_arb_go2critical_en = 0x1 - // .. .. ==> 0XF8006064[17:17] = 0x00000001U - // .. .. ==> MASK : 0x00020000U VAL : 0x00020000U - // .. .. - EMIT_MASKWRITE(0XF8006064, 0x00021FE0U ,0x00020000U), - // .. .. reg_ddrc_wrlvl_ww = 0x41 - // .. .. ==> 0XF8006068[7:0] = 0x00000041U - // .. .. ==> MASK : 0x000000FFU VAL : 0x00000041U - // .. .. reg_ddrc_rdlvl_rr = 0x41 - // .. .. ==> 0XF8006068[15:8] = 0x00000041U - // .. .. ==> MASK : 0x0000FF00U VAL : 0x00004100U - // .. .. reg_ddrc_dfi_t_wlmrd = 0x28 - // .. .. ==> 0XF8006068[25:16] = 0x00000028U - // .. .. ==> MASK : 0x03FF0000U VAL : 0x00280000U - // .. .. - EMIT_MASKWRITE(0XF8006068, 0x03FFFFFFU ,0x00284141U), - // .. .. dfi_t_ctrlupd_interval_min_x1024 = 0x10 - // .. .. ==> 0XF800606C[7:0] = 0x00000010U - // .. .. ==> MASK : 0x000000FFU VAL : 0x00000010U - // .. .. dfi_t_ctrlupd_interval_max_x1024 = 0x16 - // .. .. ==> 0XF800606C[15:8] = 0x00000016U - // .. .. ==> MASK : 0x0000FF00U VAL : 0x00001600U - // .. .. - EMIT_MASKWRITE(0XF800606C, 0x0000FFFFU ,0x00001610U), - // .. .. refresh_timer0_start_value_x32 = 0x0 - // .. .. ==> 0XF80060A0[11:0] = 0x00000000U - // .. .. ==> MASK : 0x00000FFFU VAL : 0x00000000U - // .. .. refresh_timer1_start_value_x32 = 0x8 - // .. .. ==> 0XF80060A0[23:12] = 0x00000008U - // .. .. ==> MASK : 0x00FFF000U VAL : 0x00008000U - // .. .. - EMIT_MASKWRITE(0XF80060A0, 0x00FFFFFFU ,0x00008000U), - // .. .. reg_ddrc_dis_auto_zq = 0x0 - // .. .. ==> 0XF80060A4[0:0] = 0x00000000U - // .. .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. .. reg_ddrc_ddr3 = 0x1 - // .. .. ==> 0XF80060A4[1:1] = 0x00000001U - // .. .. ==> MASK : 0x00000002U VAL : 0x00000002U - // .. .. reg_ddrc_t_mod = 0x200 - // .. .. ==> 0XF80060A4[11:2] = 0x00000200U - // .. .. ==> MASK : 0x00000FFCU VAL : 0x00000800U - // .. .. reg_ddrc_t_zq_long_nop = 0x200 - // .. .. ==> 0XF80060A4[21:12] = 0x00000200U - // .. .. ==> MASK : 0x003FF000U VAL : 0x00200000U - // .. .. reg_ddrc_t_zq_short_nop = 0x40 - // .. .. ==> 0XF80060A4[31:22] = 0x00000040U - // .. .. ==> MASK : 0xFFC00000U VAL : 0x10000000U - // .. .. - EMIT_MASKWRITE(0XF80060A4, 0xFFFFFFFFU ,0x10200802U), - // .. .. t_zq_short_interval_x1024 = 0xcb73 - // .. .. ==> 0XF80060A8[19:0] = 0x0000CB73U - // .. .. ==> MASK : 0x000FFFFFU VAL : 0x0000CB73U - // .. .. dram_rstn_x1024 = 0x69 - // .. .. ==> 0XF80060A8[27:20] = 0x00000069U - // .. .. ==> MASK : 0x0FF00000U VAL : 0x06900000U - // .. .. - EMIT_MASKWRITE(0XF80060A8, 0x0FFFFFFFU ,0x0690CB73U), - // .. .. deeppowerdown_en = 0x0 - // .. .. ==> 0XF80060AC[0:0] = 0x00000000U - // .. .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. .. deeppowerdown_to_x1024 = 0xff - // .. .. ==> 0XF80060AC[8:1] = 0x000000FFU - // .. .. ==> MASK : 0x000001FEU VAL : 0x000001FEU - // .. .. - EMIT_MASKWRITE(0XF80060AC, 0x000001FFU ,0x000001FEU), - // .. .. dfi_wrlvl_max_x1024 = 0xfff - // .. .. ==> 0XF80060B0[11:0] = 0x00000FFFU - // .. .. ==> MASK : 0x00000FFFU VAL : 0x00000FFFU - // .. .. dfi_rdlvl_max_x1024 = 0xfff - // .. .. ==> 0XF80060B0[23:12] = 0x00000FFFU - // .. .. ==> MASK : 0x00FFF000U VAL : 0x00FFF000U - // .. .. ddrc_reg_twrlvl_max_error = 0x0 - // .. .. ==> 0XF80060B0[24:24] = 0x00000000U - // .. .. ==> MASK : 0x01000000U VAL : 0x00000000U - // .. .. ddrc_reg_trdlvl_max_error = 0x0 - // .. .. ==> 0XF80060B0[25:25] = 0x00000000U - // .. .. ==> MASK : 0x02000000U VAL : 0x00000000U - // .. .. reg_ddrc_dfi_wr_level_en = 0x1 - // .. .. ==> 0XF80060B0[26:26] = 0x00000001U - // .. .. ==> MASK : 0x04000000U VAL : 0x04000000U - // .. .. reg_ddrc_dfi_rd_dqs_gate_level = 0x1 - // .. .. ==> 0XF80060B0[27:27] = 0x00000001U - // .. .. ==> MASK : 0x08000000U VAL : 0x08000000U - // .. .. reg_ddrc_dfi_rd_data_eye_train = 0x1 - // .. .. ==> 0XF80060B0[28:28] = 0x00000001U - // .. .. ==> MASK : 0x10000000U VAL : 0x10000000U - // .. .. - EMIT_MASKWRITE(0XF80060B0, 0x1FFFFFFFU ,0x1CFFFFFFU), - // .. .. reg_ddrc_2t_delay = 0x0 - // .. .. ==> 0XF80060B4[8:0] = 0x00000000U - // .. .. ==> MASK : 0x000001FFU VAL : 0x00000000U - // .. .. reg_ddrc_skip_ocd = 0x1 - // .. .. ==> 0XF80060B4[9:9] = 0x00000001U - // .. .. ==> MASK : 0x00000200U VAL : 0x00000200U - // .. .. reg_ddrc_dis_pre_bypass = 0x0 - // .. .. ==> 0XF80060B4[10:10] = 0x00000000U - // .. .. ==> MASK : 0x00000400U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF80060B4, 0x000007FFU ,0x00000200U), - // .. .. reg_ddrc_dfi_t_rddata_en = 0x6 - // .. .. ==> 0XF80060B8[4:0] = 0x00000006U - // .. .. ==> MASK : 0x0000001FU VAL : 0x00000006U - // .. .. reg_ddrc_dfi_t_ctrlup_min = 0x3 - // .. .. ==> 0XF80060B8[14:5] = 0x00000003U - // .. .. ==> MASK : 0x00007FE0U VAL : 0x00000060U - // .. .. reg_ddrc_dfi_t_ctrlup_max = 0x40 - // .. .. ==> 0XF80060B8[24:15] = 0x00000040U - // .. .. ==> MASK : 0x01FF8000U VAL : 0x00200000U - // .. .. - EMIT_MASKWRITE(0XF80060B8, 0x01FFFFFFU ,0x00200066U), - // .. .. START: RESET ECC ERROR - // .. .. Clear_Uncorrectable_DRAM_ECC_error = 1 - // .. .. ==> 0XF80060C4[0:0] = 0x00000001U - // .. .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. .. Clear_Correctable_DRAM_ECC_error = 1 - // .. .. ==> 0XF80060C4[1:1] = 0x00000001U - // .. .. ==> MASK : 0x00000002U VAL : 0x00000002U - // .. .. - EMIT_MASKWRITE(0XF80060C4, 0x00000003U ,0x00000003U), - // .. .. FINISH: RESET ECC ERROR - // .. .. Clear_Uncorrectable_DRAM_ECC_error = 0x0 - // .. .. ==> 0XF80060C4[0:0] = 0x00000000U - // .. .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. .. Clear_Correctable_DRAM_ECC_error = 0x0 - // .. .. ==> 0XF80060C4[1:1] = 0x00000000U - // .. .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF80060C4, 0x00000003U ,0x00000000U), - // .. .. CORR_ECC_LOG_VALID = 0x0 - // .. .. ==> 0XF80060C8[0:0] = 0x00000000U - // .. .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. .. ECC_CORRECTED_BIT_NUM = 0x0 - // .. .. ==> 0XF80060C8[7:1] = 0x00000000U - // .. .. ==> MASK : 0x000000FEU VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF80060C8, 0x000000FFU ,0x00000000U), - // .. .. UNCORR_ECC_LOG_VALID = 0x0 - // .. .. ==> 0XF80060DC[0:0] = 0x00000000U - // .. .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF80060DC, 0x00000001U ,0x00000000U), - // .. .. STAT_NUM_CORR_ERR = 0x0 - // .. .. ==> 0XF80060F0[15:8] = 0x00000000U - // .. .. ==> MASK : 0x0000FF00U VAL : 0x00000000U - // .. .. STAT_NUM_UNCORR_ERR = 0x0 - // .. .. ==> 0XF80060F0[7:0] = 0x00000000U - // .. .. ==> MASK : 0x000000FFU VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF80060F0, 0x0000FFFFU ,0x00000000U), - // .. .. reg_ddrc_ecc_mode = 0x0 - // .. .. ==> 0XF80060F4[2:0] = 0x00000000U - // .. .. ==> MASK : 0x00000007U VAL : 0x00000000U - // .. .. reg_ddrc_dis_scrub = 0x1 - // .. .. ==> 0XF80060F4[3:3] = 0x00000001U - // .. .. ==> MASK : 0x00000008U VAL : 0x00000008U - // .. .. - EMIT_MASKWRITE(0XF80060F4, 0x0000000FU ,0x00000008U), - // .. .. reg_phy_dif_on = 0x0 - // .. .. ==> 0XF8006114[3:0] = 0x00000000U - // .. .. ==> MASK : 0x0000000FU VAL : 0x00000000U - // .. .. reg_phy_dif_off = 0x0 - // .. .. ==> 0XF8006114[7:4] = 0x00000000U - // .. .. ==> MASK : 0x000000F0U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006114, 0x000000FFU ,0x00000000U), - // .. .. reg_phy_data_slice_in_use = 0x1 - // .. .. ==> 0XF8006118[0:0] = 0x00000001U - // .. .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. .. reg_phy_rdlvl_inc_mode = 0x0 - // .. .. ==> 0XF8006118[1:1] = 0x00000000U - // .. .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. .. reg_phy_gatelvl_inc_mode = 0x0 - // .. .. ==> 0XF8006118[2:2] = 0x00000000U - // .. .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. .. reg_phy_wrlvl_inc_mode = 0x0 - // .. .. ==> 0XF8006118[3:3] = 0x00000000U - // .. .. ==> MASK : 0x00000008U VAL : 0x00000000U - // .. .. reg_phy_board_lpbk_tx = 0x0 - // .. .. ==> 0XF8006118[4:4] = 0x00000000U - // .. .. ==> MASK : 0x00000010U VAL : 0x00000000U - // .. .. reg_phy_board_lpbk_rx = 0x0 - // .. .. ==> 0XF8006118[5:5] = 0x00000000U - // .. .. ==> MASK : 0x00000020U VAL : 0x00000000U - // .. .. reg_phy_bist_shift_dq = 0x0 - // .. .. ==> 0XF8006118[14:6] = 0x00000000U - // .. .. ==> MASK : 0x00007FC0U VAL : 0x00000000U - // .. .. reg_phy_bist_err_clr = 0x0 - // .. .. ==> 0XF8006118[23:15] = 0x00000000U - // .. .. ==> MASK : 0x00FF8000U VAL : 0x00000000U - // .. .. reg_phy_dq_offset = 0x40 - // .. .. ==> 0XF8006118[30:24] = 0x00000040U - // .. .. ==> MASK : 0x7F000000U VAL : 0x40000000U - // .. .. - EMIT_MASKWRITE(0XF8006118, 0x7FFFFFFFU ,0x40000001U), - // .. .. reg_phy_data_slice_in_use = 0x1 - // .. .. ==> 0XF800611C[0:0] = 0x00000001U - // .. .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. .. reg_phy_rdlvl_inc_mode = 0x0 - // .. .. ==> 0XF800611C[1:1] = 0x00000000U - // .. .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. .. reg_phy_gatelvl_inc_mode = 0x0 - // .. .. ==> 0XF800611C[2:2] = 0x00000000U - // .. .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. .. reg_phy_wrlvl_inc_mode = 0x0 - // .. .. ==> 0XF800611C[3:3] = 0x00000000U - // .. .. ==> MASK : 0x00000008U VAL : 0x00000000U - // .. .. reg_phy_board_lpbk_tx = 0x0 - // .. .. ==> 0XF800611C[4:4] = 0x00000000U - // .. .. ==> MASK : 0x00000010U VAL : 0x00000000U - // .. .. reg_phy_board_lpbk_rx = 0x0 - // .. .. ==> 0XF800611C[5:5] = 0x00000000U - // .. .. ==> MASK : 0x00000020U VAL : 0x00000000U - // .. .. reg_phy_bist_shift_dq = 0x0 - // .. .. ==> 0XF800611C[14:6] = 0x00000000U - // .. .. ==> MASK : 0x00007FC0U VAL : 0x00000000U - // .. .. reg_phy_bist_err_clr = 0x0 - // .. .. ==> 0XF800611C[23:15] = 0x00000000U - // .. .. ==> MASK : 0x00FF8000U VAL : 0x00000000U - // .. .. reg_phy_dq_offset = 0x40 - // .. .. ==> 0XF800611C[30:24] = 0x00000040U - // .. .. ==> MASK : 0x7F000000U VAL : 0x40000000U - // .. .. - EMIT_MASKWRITE(0XF800611C, 0x7FFFFFFFU ,0x40000001U), - // .. .. reg_phy_data_slice_in_use = 0x1 - // .. .. ==> 0XF8006120[0:0] = 0x00000001U - // .. .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. .. reg_phy_rdlvl_inc_mode = 0x0 - // .. .. ==> 0XF8006120[1:1] = 0x00000000U - // .. .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. .. reg_phy_gatelvl_inc_mode = 0x0 - // .. .. ==> 0XF8006120[2:2] = 0x00000000U - // .. .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. .. reg_phy_wrlvl_inc_mode = 0x0 - // .. .. ==> 0XF8006120[3:3] = 0x00000000U - // .. .. ==> MASK : 0x00000008U VAL : 0x00000000U - // .. .. reg_phy_board_lpbk_tx = 0x0 - // .. .. ==> 0XF8006120[4:4] = 0x00000000U - // .. .. ==> MASK : 0x00000010U VAL : 0x00000000U - // .. .. reg_phy_board_lpbk_rx = 0x0 - // .. .. ==> 0XF8006120[5:5] = 0x00000000U - // .. .. ==> MASK : 0x00000020U VAL : 0x00000000U - // .. .. reg_phy_bist_shift_dq = 0x0 - // .. .. ==> 0XF8006120[14:6] = 0x00000000U - // .. .. ==> MASK : 0x00007FC0U VAL : 0x00000000U - // .. .. reg_phy_bist_err_clr = 0x0 - // .. .. ==> 0XF8006120[23:15] = 0x00000000U - // .. .. ==> MASK : 0x00FF8000U VAL : 0x00000000U - // .. .. reg_phy_dq_offset = 0x40 - // .. .. ==> 0XF8006120[30:24] = 0x00000040U - // .. .. ==> MASK : 0x7F000000U VAL : 0x40000000U - // .. .. - EMIT_MASKWRITE(0XF8006120, 0x7FFFFFFFU ,0x40000001U), - // .. .. reg_phy_data_slice_in_use = 0x1 - // .. .. ==> 0XF8006124[0:0] = 0x00000001U - // .. .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. .. reg_phy_rdlvl_inc_mode = 0x0 - // .. .. ==> 0XF8006124[1:1] = 0x00000000U - // .. .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. .. reg_phy_gatelvl_inc_mode = 0x0 - // .. .. ==> 0XF8006124[2:2] = 0x00000000U - // .. .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. .. reg_phy_wrlvl_inc_mode = 0x0 - // .. .. ==> 0XF8006124[3:3] = 0x00000000U - // .. .. ==> MASK : 0x00000008U VAL : 0x00000000U - // .. .. reg_phy_board_lpbk_tx = 0x0 - // .. .. ==> 0XF8006124[4:4] = 0x00000000U - // .. .. ==> MASK : 0x00000010U VAL : 0x00000000U - // .. .. reg_phy_board_lpbk_rx = 0x0 - // .. .. ==> 0XF8006124[5:5] = 0x00000000U - // .. .. ==> MASK : 0x00000020U VAL : 0x00000000U - // .. .. reg_phy_bist_shift_dq = 0x0 - // .. .. ==> 0XF8006124[14:6] = 0x00000000U - // .. .. ==> MASK : 0x00007FC0U VAL : 0x00000000U - // .. .. reg_phy_bist_err_clr = 0x0 - // .. .. ==> 0XF8006124[23:15] = 0x00000000U - // .. .. ==> MASK : 0x00FF8000U VAL : 0x00000000U - // .. .. reg_phy_dq_offset = 0x40 - // .. .. ==> 0XF8006124[30:24] = 0x00000040U - // .. .. ==> MASK : 0x7F000000U VAL : 0x40000000U - // .. .. - EMIT_MASKWRITE(0XF8006124, 0x7FFFFFFFU ,0x40000001U), - // .. .. reg_phy_wrlvl_init_ratio = 0x0 - // .. .. ==> 0XF800612C[9:0] = 0x00000000U - // .. .. ==> MASK : 0x000003FFU VAL : 0x00000000U - // .. .. reg_phy_gatelvl_init_ratio = 0xa1 - // .. .. ==> 0XF800612C[19:10] = 0x000000A1U - // .. .. ==> MASK : 0x000FFC00U VAL : 0x00028400U - // .. .. - EMIT_MASKWRITE(0XF800612C, 0x000FFFFFU ,0x00028400U), - // .. .. reg_phy_wrlvl_init_ratio = 0x0 - // .. .. ==> 0XF8006130[9:0] = 0x00000000U - // .. .. ==> MASK : 0x000003FFU VAL : 0x00000000U - // .. .. reg_phy_gatelvl_init_ratio = 0xa0 - // .. .. ==> 0XF8006130[19:10] = 0x000000A0U - // .. .. ==> MASK : 0x000FFC00U VAL : 0x00028000U - // .. .. - EMIT_MASKWRITE(0XF8006130, 0x000FFFFFU ,0x00028000U), - // .. .. reg_phy_wrlvl_init_ratio = 0x7 - // .. .. ==> 0XF8006134[9:0] = 0x00000007U - // .. .. ==> MASK : 0x000003FFU VAL : 0x00000007U - // .. .. reg_phy_gatelvl_init_ratio = 0xad - // .. .. ==> 0XF8006134[19:10] = 0x000000ADU - // .. .. ==> MASK : 0x000FFC00U VAL : 0x0002B400U - // .. .. - EMIT_MASKWRITE(0XF8006134, 0x000FFFFFU ,0x0002B407U), - // .. .. reg_phy_wrlvl_init_ratio = 0x7 - // .. .. ==> 0XF8006138[9:0] = 0x00000007U - // .. .. ==> MASK : 0x000003FFU VAL : 0x00000007U - // .. .. reg_phy_gatelvl_init_ratio = 0xad - // .. .. ==> 0XF8006138[19:10] = 0x000000ADU - // .. .. ==> MASK : 0x000FFC00U VAL : 0x0002B400U - // .. .. - EMIT_MASKWRITE(0XF8006138, 0x000FFFFFU ,0x0002B407U), - // .. .. reg_phy_rd_dqs_slave_ratio = 0x35 - // .. .. ==> 0XF8006140[9:0] = 0x00000035U - // .. .. ==> MASK : 0x000003FFU VAL : 0x00000035U - // .. .. reg_phy_rd_dqs_slave_force = 0x0 - // .. .. ==> 0XF8006140[10:10] = 0x00000000U - // .. .. ==> MASK : 0x00000400U VAL : 0x00000000U - // .. .. reg_phy_rd_dqs_slave_delay = 0x0 - // .. .. ==> 0XF8006140[19:11] = 0x00000000U - // .. .. ==> MASK : 0x000FF800U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006140, 0x000FFFFFU ,0x00000035U), - // .. .. reg_phy_rd_dqs_slave_ratio = 0x35 - // .. .. ==> 0XF8006144[9:0] = 0x00000035U - // .. .. ==> MASK : 0x000003FFU VAL : 0x00000035U - // .. .. reg_phy_rd_dqs_slave_force = 0x0 - // .. .. ==> 0XF8006144[10:10] = 0x00000000U - // .. .. ==> MASK : 0x00000400U VAL : 0x00000000U - // .. .. reg_phy_rd_dqs_slave_delay = 0x0 - // .. .. ==> 0XF8006144[19:11] = 0x00000000U - // .. .. ==> MASK : 0x000FF800U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006144, 0x000FFFFFU ,0x00000035U), - // .. .. reg_phy_rd_dqs_slave_ratio = 0x35 - // .. .. ==> 0XF8006148[9:0] = 0x00000035U - // .. .. ==> MASK : 0x000003FFU VAL : 0x00000035U - // .. .. reg_phy_rd_dqs_slave_force = 0x0 - // .. .. ==> 0XF8006148[10:10] = 0x00000000U - // .. .. ==> MASK : 0x00000400U VAL : 0x00000000U - // .. .. reg_phy_rd_dqs_slave_delay = 0x0 - // .. .. ==> 0XF8006148[19:11] = 0x00000000U - // .. .. ==> MASK : 0x000FF800U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006148, 0x000FFFFFU ,0x00000035U), - // .. .. reg_phy_rd_dqs_slave_ratio = 0x35 - // .. .. ==> 0XF800614C[9:0] = 0x00000035U - // .. .. ==> MASK : 0x000003FFU VAL : 0x00000035U - // .. .. reg_phy_rd_dqs_slave_force = 0x0 - // .. .. ==> 0XF800614C[10:10] = 0x00000000U - // .. .. ==> MASK : 0x00000400U VAL : 0x00000000U - // .. .. reg_phy_rd_dqs_slave_delay = 0x0 - // .. .. ==> 0XF800614C[19:11] = 0x00000000U - // .. .. ==> MASK : 0x000FF800U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF800614C, 0x000FFFFFU ,0x00000035U), - // .. .. reg_phy_wr_dqs_slave_ratio = 0x7c - // .. .. ==> 0XF8006154[9:0] = 0x0000007CU - // .. .. ==> MASK : 0x000003FFU VAL : 0x0000007CU - // .. .. reg_phy_wr_dqs_slave_force = 0x0 - // .. .. ==> 0XF8006154[10:10] = 0x00000000U - // .. .. ==> MASK : 0x00000400U VAL : 0x00000000U - // .. .. reg_phy_wr_dqs_slave_delay = 0x0 - // .. .. ==> 0XF8006154[19:11] = 0x00000000U - // .. .. ==> MASK : 0x000FF800U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006154, 0x000FFFFFU ,0x0000007CU), - // .. .. reg_phy_wr_dqs_slave_ratio = 0x7c - // .. .. ==> 0XF8006158[9:0] = 0x0000007CU - // .. .. ==> MASK : 0x000003FFU VAL : 0x0000007CU - // .. .. reg_phy_wr_dqs_slave_force = 0x0 - // .. .. ==> 0XF8006158[10:10] = 0x00000000U - // .. .. ==> MASK : 0x00000400U VAL : 0x00000000U - // .. .. reg_phy_wr_dqs_slave_delay = 0x0 - // .. .. ==> 0XF8006158[19:11] = 0x00000000U - // .. .. ==> MASK : 0x000FF800U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006158, 0x000FFFFFU ,0x0000007CU), - // .. .. reg_phy_wr_dqs_slave_ratio = 0x87 - // .. .. ==> 0XF800615C[9:0] = 0x00000087U - // .. .. ==> MASK : 0x000003FFU VAL : 0x00000087U - // .. .. reg_phy_wr_dqs_slave_force = 0x0 - // .. .. ==> 0XF800615C[10:10] = 0x00000000U - // .. .. ==> MASK : 0x00000400U VAL : 0x00000000U - // .. .. reg_phy_wr_dqs_slave_delay = 0x0 - // .. .. ==> 0XF800615C[19:11] = 0x00000000U - // .. .. ==> MASK : 0x000FF800U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF800615C, 0x000FFFFFU ,0x00000087U), - // .. .. reg_phy_wr_dqs_slave_ratio = 0x87 - // .. .. ==> 0XF8006160[9:0] = 0x00000087U - // .. .. ==> MASK : 0x000003FFU VAL : 0x00000087U - // .. .. reg_phy_wr_dqs_slave_force = 0x0 - // .. .. ==> 0XF8006160[10:10] = 0x00000000U - // .. .. ==> MASK : 0x00000400U VAL : 0x00000000U - // .. .. reg_phy_wr_dqs_slave_delay = 0x0 - // .. .. ==> 0XF8006160[19:11] = 0x00000000U - // .. .. ==> MASK : 0x000FF800U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006160, 0x000FFFFFU ,0x00000087U), - // .. .. reg_phy_fifo_we_slave_ratio = 0xf6 - // .. .. ==> 0XF8006168[10:0] = 0x000000F6U - // .. .. ==> MASK : 0x000007FFU VAL : 0x000000F6U - // .. .. reg_phy_fifo_we_in_force = 0x0 - // .. .. ==> 0XF8006168[11:11] = 0x00000000U - // .. .. ==> MASK : 0x00000800U VAL : 0x00000000U - // .. .. reg_phy_fifo_we_in_delay = 0x0 - // .. .. ==> 0XF8006168[20:12] = 0x00000000U - // .. .. ==> MASK : 0x001FF000U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006168, 0x001FFFFFU ,0x000000F6U), - // .. .. reg_phy_fifo_we_slave_ratio = 0xf5 - // .. .. ==> 0XF800616C[10:0] = 0x000000F5U - // .. .. ==> MASK : 0x000007FFU VAL : 0x000000F5U - // .. .. reg_phy_fifo_we_in_force = 0x0 - // .. .. ==> 0XF800616C[11:11] = 0x00000000U - // .. .. ==> MASK : 0x00000800U VAL : 0x00000000U - // .. .. reg_phy_fifo_we_in_delay = 0x0 - // .. .. ==> 0XF800616C[20:12] = 0x00000000U - // .. .. ==> MASK : 0x001FF000U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF800616C, 0x001FFFFFU ,0x000000F5U), - // .. .. reg_phy_fifo_we_slave_ratio = 0x102 - // .. .. ==> 0XF8006170[10:0] = 0x00000102U - // .. .. ==> MASK : 0x000007FFU VAL : 0x00000102U - // .. .. reg_phy_fifo_we_in_force = 0x0 - // .. .. ==> 0XF8006170[11:11] = 0x00000000U - // .. .. ==> MASK : 0x00000800U VAL : 0x00000000U - // .. .. reg_phy_fifo_we_in_delay = 0x0 - // .. .. ==> 0XF8006170[20:12] = 0x00000000U - // .. .. ==> MASK : 0x001FF000U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006170, 0x001FFFFFU ,0x00000102U), - // .. .. reg_phy_fifo_we_slave_ratio = 0x102 - // .. .. ==> 0XF8006174[10:0] = 0x00000102U - // .. .. ==> MASK : 0x000007FFU VAL : 0x00000102U - // .. .. reg_phy_fifo_we_in_force = 0x0 - // .. .. ==> 0XF8006174[11:11] = 0x00000000U - // .. .. ==> MASK : 0x00000800U VAL : 0x00000000U - // .. .. reg_phy_fifo_we_in_delay = 0x0 - // .. .. ==> 0XF8006174[20:12] = 0x00000000U - // .. .. ==> MASK : 0x001FF000U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006174, 0x001FFFFFU ,0x00000102U), - // .. .. reg_phy_wr_data_slave_ratio = 0xbc - // .. .. ==> 0XF800617C[9:0] = 0x000000BCU - // .. .. ==> MASK : 0x000003FFU VAL : 0x000000BCU - // .. .. reg_phy_wr_data_slave_force = 0x0 - // .. .. ==> 0XF800617C[10:10] = 0x00000000U - // .. .. ==> MASK : 0x00000400U VAL : 0x00000000U - // .. .. reg_phy_wr_data_slave_delay = 0x0 - // .. .. ==> 0XF800617C[19:11] = 0x00000000U - // .. .. ==> MASK : 0x000FF800U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF800617C, 0x000FFFFFU ,0x000000BCU), - // .. .. reg_phy_wr_data_slave_ratio = 0xbc - // .. .. ==> 0XF8006180[9:0] = 0x000000BCU - // .. .. ==> MASK : 0x000003FFU VAL : 0x000000BCU - // .. .. reg_phy_wr_data_slave_force = 0x0 - // .. .. ==> 0XF8006180[10:10] = 0x00000000U - // .. .. ==> MASK : 0x00000400U VAL : 0x00000000U - // .. .. reg_phy_wr_data_slave_delay = 0x0 - // .. .. ==> 0XF8006180[19:11] = 0x00000000U - // .. .. ==> MASK : 0x000FF800U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006180, 0x000FFFFFU ,0x000000BCU), - // .. .. reg_phy_wr_data_slave_ratio = 0xc7 - // .. .. ==> 0XF8006184[9:0] = 0x000000C7U - // .. .. ==> MASK : 0x000003FFU VAL : 0x000000C7U - // .. .. reg_phy_wr_data_slave_force = 0x0 - // .. .. ==> 0XF8006184[10:10] = 0x00000000U - // .. .. ==> MASK : 0x00000400U VAL : 0x00000000U - // .. .. reg_phy_wr_data_slave_delay = 0x0 - // .. .. ==> 0XF8006184[19:11] = 0x00000000U - // .. .. ==> MASK : 0x000FF800U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006184, 0x000FFFFFU ,0x000000C7U), - // .. .. reg_phy_wr_data_slave_ratio = 0xc7 - // .. .. ==> 0XF8006188[9:0] = 0x000000C7U - // .. .. ==> MASK : 0x000003FFU VAL : 0x000000C7U - // .. .. reg_phy_wr_data_slave_force = 0x0 - // .. .. ==> 0XF8006188[10:10] = 0x00000000U - // .. .. ==> MASK : 0x00000400U VAL : 0x00000000U - // .. .. reg_phy_wr_data_slave_delay = 0x0 - // .. .. ==> 0XF8006188[19:11] = 0x00000000U - // .. .. ==> MASK : 0x000FF800U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006188, 0x000FFFFFU ,0x000000C7U), - // .. .. reg_phy_loopback = 0x0 - // .. .. ==> 0XF8006190[0:0] = 0x00000000U - // .. .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. .. reg_phy_bl2 = 0x0 - // .. .. ==> 0XF8006190[1:1] = 0x00000000U - // .. .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. .. reg_phy_at_spd_atpg = 0x0 - // .. .. ==> 0XF8006190[2:2] = 0x00000000U - // .. .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. .. reg_phy_bist_enable = 0x0 - // .. .. ==> 0XF8006190[3:3] = 0x00000000U - // .. .. ==> MASK : 0x00000008U VAL : 0x00000000U - // .. .. reg_phy_bist_force_err = 0x0 - // .. .. ==> 0XF8006190[4:4] = 0x00000000U - // .. .. ==> MASK : 0x00000010U VAL : 0x00000000U - // .. .. reg_phy_bist_mode = 0x0 - // .. .. ==> 0XF8006190[6:5] = 0x00000000U - // .. .. ==> MASK : 0x00000060U VAL : 0x00000000U - // .. .. reg_phy_invert_clkout = 0x1 - // .. .. ==> 0XF8006190[7:7] = 0x00000001U - // .. .. ==> MASK : 0x00000080U VAL : 0x00000080U - // .. .. reg_phy_all_dq_mpr_rd_resp = 0x0 - // .. .. ==> 0XF8006190[8:8] = 0x00000000U - // .. .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. .. reg_phy_sel_logic = 0x0 - // .. .. ==> 0XF8006190[9:9] = 0x00000000U - // .. .. ==> MASK : 0x00000200U VAL : 0x00000000U - // .. .. reg_phy_ctrl_slave_ratio = 0x100 - // .. .. ==> 0XF8006190[19:10] = 0x00000100U - // .. .. ==> MASK : 0x000FFC00U VAL : 0x00040000U - // .. .. reg_phy_ctrl_slave_force = 0x0 - // .. .. ==> 0XF8006190[20:20] = 0x00000000U - // .. .. ==> MASK : 0x00100000U VAL : 0x00000000U - // .. .. reg_phy_ctrl_slave_delay = 0x0 - // .. .. ==> 0XF8006190[27:21] = 0x00000000U - // .. .. ==> MASK : 0x0FE00000U VAL : 0x00000000U - // .. .. reg_phy_use_rank0_delays = 0x1 - // .. .. ==> 0XF8006190[28:28] = 0x00000001U - // .. .. ==> MASK : 0x10000000U VAL : 0x10000000U - // .. .. reg_phy_lpddr = 0x0 - // .. .. ==> 0XF8006190[29:29] = 0x00000000U - // .. .. ==> MASK : 0x20000000U VAL : 0x00000000U - // .. .. reg_phy_cmd_latency = 0x0 - // .. .. ==> 0XF8006190[30:30] = 0x00000000U - // .. .. ==> MASK : 0x40000000U VAL : 0x00000000U - // .. .. reg_phy_int_lpbk = 0x0 - // .. .. ==> 0XF8006190[31:31] = 0x00000000U - // .. .. ==> MASK : 0x80000000U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006190, 0xFFFFFFFFU ,0x10040080U), - // .. .. reg_phy_wr_rl_delay = 0x2 - // .. .. ==> 0XF8006194[4:0] = 0x00000002U - // .. .. ==> MASK : 0x0000001FU VAL : 0x00000002U - // .. .. reg_phy_rd_rl_delay = 0x4 - // .. .. ==> 0XF8006194[9:5] = 0x00000004U - // .. .. ==> MASK : 0x000003E0U VAL : 0x00000080U - // .. .. reg_phy_dll_lock_diff = 0xf - // .. .. ==> 0XF8006194[13:10] = 0x0000000FU - // .. .. ==> MASK : 0x00003C00U VAL : 0x00003C00U - // .. .. reg_phy_use_wr_level = 0x1 - // .. .. ==> 0XF8006194[14:14] = 0x00000001U - // .. .. ==> MASK : 0x00004000U VAL : 0x00004000U - // .. .. reg_phy_use_rd_dqs_gate_level = 0x1 - // .. .. ==> 0XF8006194[15:15] = 0x00000001U - // .. .. ==> MASK : 0x00008000U VAL : 0x00008000U - // .. .. reg_phy_use_rd_data_eye_level = 0x1 - // .. .. ==> 0XF8006194[16:16] = 0x00000001U - // .. .. ==> MASK : 0x00010000U VAL : 0x00010000U - // .. .. reg_phy_dis_calib_rst = 0x0 - // .. .. ==> 0XF8006194[17:17] = 0x00000000U - // .. .. ==> MASK : 0x00020000U VAL : 0x00000000U - // .. .. reg_phy_ctrl_slave_delay = 0x0 - // .. .. ==> 0XF8006194[19:18] = 0x00000000U - // .. .. ==> MASK : 0x000C0000U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006194, 0x000FFFFFU ,0x0001FC82U), - // .. .. reg_arb_page_addr_mask = 0x0 - // .. .. ==> 0XF8006204[31:0] = 0x00000000U - // .. .. ==> MASK : 0xFFFFFFFFU VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006204, 0xFFFFFFFFU ,0x00000000U), - // .. .. reg_arb_pri_wr_portn = 0x3ff - // .. .. ==> 0XF8006208[9:0] = 0x000003FFU - // .. .. ==> MASK : 0x000003FFU VAL : 0x000003FFU - // .. .. reg_arb_disable_aging_wr_portn = 0x0 - // .. .. ==> 0XF8006208[16:16] = 0x00000000U - // .. .. ==> MASK : 0x00010000U VAL : 0x00000000U - // .. .. reg_arb_disable_urgent_wr_portn = 0x0 - // .. .. ==> 0XF8006208[17:17] = 0x00000000U - // .. .. ==> MASK : 0x00020000U VAL : 0x00000000U - // .. .. reg_arb_dis_page_match_wr_portn = 0x0 - // .. .. ==> 0XF8006208[18:18] = 0x00000000U - // .. .. ==> MASK : 0x00040000U VAL : 0x00000000U - // .. .. reg_arb_dis_rmw_portn = 0x1 - // .. .. ==> 0XF8006208[19:19] = 0x00000001U - // .. .. ==> MASK : 0x00080000U VAL : 0x00080000U - // .. .. - EMIT_MASKWRITE(0XF8006208, 0x000F03FFU ,0x000803FFU), - // .. .. reg_arb_pri_wr_portn = 0x3ff - // .. .. ==> 0XF800620C[9:0] = 0x000003FFU - // .. .. ==> MASK : 0x000003FFU VAL : 0x000003FFU - // .. .. reg_arb_disable_aging_wr_portn = 0x0 - // .. .. ==> 0XF800620C[16:16] = 0x00000000U - // .. .. ==> MASK : 0x00010000U VAL : 0x00000000U - // .. .. reg_arb_disable_urgent_wr_portn = 0x0 - // .. .. ==> 0XF800620C[17:17] = 0x00000000U - // .. .. ==> MASK : 0x00020000U VAL : 0x00000000U - // .. .. reg_arb_dis_page_match_wr_portn = 0x0 - // .. .. ==> 0XF800620C[18:18] = 0x00000000U - // .. .. ==> MASK : 0x00040000U VAL : 0x00000000U - // .. .. reg_arb_dis_rmw_portn = 0x1 - // .. .. ==> 0XF800620C[19:19] = 0x00000001U - // .. .. ==> MASK : 0x00080000U VAL : 0x00080000U - // .. .. - EMIT_MASKWRITE(0XF800620C, 0x000F03FFU ,0x000803FFU), - // .. .. reg_arb_pri_wr_portn = 0x3ff - // .. .. ==> 0XF8006210[9:0] = 0x000003FFU - // .. .. ==> MASK : 0x000003FFU VAL : 0x000003FFU - // .. .. reg_arb_disable_aging_wr_portn = 0x0 - // .. .. ==> 0XF8006210[16:16] = 0x00000000U - // .. .. ==> MASK : 0x00010000U VAL : 0x00000000U - // .. .. reg_arb_disable_urgent_wr_portn = 0x0 - // .. .. ==> 0XF8006210[17:17] = 0x00000000U - // .. .. ==> MASK : 0x00020000U VAL : 0x00000000U - // .. .. reg_arb_dis_page_match_wr_portn = 0x0 - // .. .. ==> 0XF8006210[18:18] = 0x00000000U - // .. .. ==> MASK : 0x00040000U VAL : 0x00000000U - // .. .. reg_arb_dis_rmw_portn = 0x1 - // .. .. ==> 0XF8006210[19:19] = 0x00000001U - // .. .. ==> MASK : 0x00080000U VAL : 0x00080000U - // .. .. - EMIT_MASKWRITE(0XF8006210, 0x000F03FFU ,0x000803FFU), - // .. .. reg_arb_pri_wr_portn = 0x3ff - // .. .. ==> 0XF8006214[9:0] = 0x000003FFU - // .. .. ==> MASK : 0x000003FFU VAL : 0x000003FFU - // .. .. reg_arb_disable_aging_wr_portn = 0x0 - // .. .. ==> 0XF8006214[16:16] = 0x00000000U - // .. .. ==> MASK : 0x00010000U VAL : 0x00000000U - // .. .. reg_arb_disable_urgent_wr_portn = 0x0 - // .. .. ==> 0XF8006214[17:17] = 0x00000000U - // .. .. ==> MASK : 0x00020000U VAL : 0x00000000U - // .. .. reg_arb_dis_page_match_wr_portn = 0x0 - // .. .. ==> 0XF8006214[18:18] = 0x00000000U - // .. .. ==> MASK : 0x00040000U VAL : 0x00000000U - // .. .. reg_arb_dis_rmw_portn = 0x1 - // .. .. ==> 0XF8006214[19:19] = 0x00000001U - // .. .. ==> MASK : 0x00080000U VAL : 0x00080000U - // .. .. - EMIT_MASKWRITE(0XF8006214, 0x000F03FFU ,0x000803FFU), - // .. .. reg_arb_pri_rd_portn = 0x3ff - // .. .. ==> 0XF8006218[9:0] = 0x000003FFU - // .. .. ==> MASK : 0x000003FFU VAL : 0x000003FFU - // .. .. reg_arb_disable_aging_rd_portn = 0x0 - // .. .. ==> 0XF8006218[16:16] = 0x00000000U - // .. .. ==> MASK : 0x00010000U VAL : 0x00000000U - // .. .. reg_arb_disable_urgent_rd_portn = 0x0 - // .. .. ==> 0XF8006218[17:17] = 0x00000000U - // .. .. ==> MASK : 0x00020000U VAL : 0x00000000U - // .. .. reg_arb_dis_page_match_rd_portn = 0x0 - // .. .. ==> 0XF8006218[18:18] = 0x00000000U - // .. .. ==> MASK : 0x00040000U VAL : 0x00000000U - // .. .. reg_arb_set_hpr_rd_portn = 0x0 - // .. .. ==> 0XF8006218[19:19] = 0x00000000U - // .. .. ==> MASK : 0x00080000U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006218, 0x000F03FFU ,0x000003FFU), - // .. .. reg_arb_pri_rd_portn = 0x3ff - // .. .. ==> 0XF800621C[9:0] = 0x000003FFU - // .. .. ==> MASK : 0x000003FFU VAL : 0x000003FFU - // .. .. reg_arb_disable_aging_rd_portn = 0x0 - // .. .. ==> 0XF800621C[16:16] = 0x00000000U - // .. .. ==> MASK : 0x00010000U VAL : 0x00000000U - // .. .. reg_arb_disable_urgent_rd_portn = 0x0 - // .. .. ==> 0XF800621C[17:17] = 0x00000000U - // .. .. ==> MASK : 0x00020000U VAL : 0x00000000U - // .. .. reg_arb_dis_page_match_rd_portn = 0x0 - // .. .. ==> 0XF800621C[18:18] = 0x00000000U - // .. .. ==> MASK : 0x00040000U VAL : 0x00000000U - // .. .. reg_arb_set_hpr_rd_portn = 0x0 - // .. .. ==> 0XF800621C[19:19] = 0x00000000U - // .. .. ==> MASK : 0x00080000U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF800621C, 0x000F03FFU ,0x000003FFU), - // .. .. reg_arb_pri_rd_portn = 0x3ff - // .. .. ==> 0XF8006220[9:0] = 0x000003FFU - // .. .. ==> MASK : 0x000003FFU VAL : 0x000003FFU - // .. .. reg_arb_disable_aging_rd_portn = 0x0 - // .. .. ==> 0XF8006220[16:16] = 0x00000000U - // .. .. ==> MASK : 0x00010000U VAL : 0x00000000U - // .. .. reg_arb_disable_urgent_rd_portn = 0x0 - // .. .. ==> 0XF8006220[17:17] = 0x00000000U - // .. .. ==> MASK : 0x00020000U VAL : 0x00000000U - // .. .. reg_arb_dis_page_match_rd_portn = 0x0 - // .. .. ==> 0XF8006220[18:18] = 0x00000000U - // .. .. ==> MASK : 0x00040000U VAL : 0x00000000U - // .. .. reg_arb_set_hpr_rd_portn = 0x0 - // .. .. ==> 0XF8006220[19:19] = 0x00000000U - // .. .. ==> MASK : 0x00080000U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006220, 0x000F03FFU ,0x000003FFU), - // .. .. reg_arb_pri_rd_portn = 0x3ff - // .. .. ==> 0XF8006224[9:0] = 0x000003FFU - // .. .. ==> MASK : 0x000003FFU VAL : 0x000003FFU - // .. .. reg_arb_disable_aging_rd_portn = 0x0 - // .. .. ==> 0XF8006224[16:16] = 0x00000000U - // .. .. ==> MASK : 0x00010000U VAL : 0x00000000U - // .. .. reg_arb_disable_urgent_rd_portn = 0x0 - // .. .. ==> 0XF8006224[17:17] = 0x00000000U - // .. .. ==> MASK : 0x00020000U VAL : 0x00000000U - // .. .. reg_arb_dis_page_match_rd_portn = 0x0 - // .. .. ==> 0XF8006224[18:18] = 0x00000000U - // .. .. ==> MASK : 0x00040000U VAL : 0x00000000U - // .. .. reg_arb_set_hpr_rd_portn = 0x0 - // .. .. ==> 0XF8006224[19:19] = 0x00000000U - // .. .. ==> MASK : 0x00080000U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006224, 0x000F03FFU ,0x000003FFU), - // .. .. reg_ddrc_lpddr2 = 0x0 - // .. .. ==> 0XF80062A8[0:0] = 0x00000000U - // .. .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. .. reg_ddrc_per_bank_refresh = 0x0 - // .. .. ==> 0XF80062A8[1:1] = 0x00000000U - // .. .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. .. reg_ddrc_derate_enable = 0x0 - // .. .. ==> 0XF80062A8[2:2] = 0x00000000U - // .. .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. .. reg_ddrc_mr4_margin = 0x0 - // .. .. ==> 0XF80062A8[11:4] = 0x00000000U - // .. .. ==> MASK : 0x00000FF0U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF80062A8, 0x00000FF7U ,0x00000000U), - // .. .. reg_ddrc_mr4_read_interval = 0x0 - // .. .. ==> 0XF80062AC[31:0] = 0x00000000U - // .. .. ==> MASK : 0xFFFFFFFFU VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF80062AC, 0xFFFFFFFFU ,0x00000000U), - // .. .. reg_ddrc_min_stable_clock_x1 = 0x5 - // .. .. ==> 0XF80062B0[3:0] = 0x00000005U - // .. .. ==> MASK : 0x0000000FU VAL : 0x00000005U - // .. .. reg_ddrc_idle_after_reset_x32 = 0x12 - // .. .. ==> 0XF80062B0[11:4] = 0x00000012U - // .. .. ==> MASK : 0x00000FF0U VAL : 0x00000120U - // .. .. reg_ddrc_t_mrw = 0x5 - // .. .. ==> 0XF80062B0[21:12] = 0x00000005U - // .. .. ==> MASK : 0x003FF000U VAL : 0x00005000U - // .. .. - EMIT_MASKWRITE(0XF80062B0, 0x003FFFFFU ,0x00005125U), - // .. .. reg_ddrc_max_auto_init_x1024 = 0xa8 - // .. .. ==> 0XF80062B4[7:0] = 0x000000A8U - // .. .. ==> MASK : 0x000000FFU VAL : 0x000000A8U - // .. .. reg_ddrc_dev_zqinit_x32 = 0x12 - // .. .. ==> 0XF80062B4[17:8] = 0x00000012U - // .. .. ==> MASK : 0x0003FF00U VAL : 0x00001200U - // .. .. - EMIT_MASKWRITE(0XF80062B4, 0x0003FFFFU ,0x000012A8U), - // .. .. START: POLL ON DCI STATUS - // .. .. DONE = 1 - // .. .. ==> 0XF8000B74[13:13] = 0x00000001U - // .. .. ==> MASK : 0x00002000U VAL : 0x00002000U - // .. .. - EMIT_MASKPOLL(0XF8000B74, 0x00002000U), - // .. .. FINISH: POLL ON DCI STATUS - // .. .. START: UNLOCK DDR - // .. .. reg_ddrc_soft_rstb = 0x1 - // .. .. ==> 0XF8006000[0:0] = 0x00000001U - // .. .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. .. reg_ddrc_powerdown_en = 0x0 - // .. .. ==> 0XF8006000[1:1] = 0x00000000U - // .. .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. .. reg_ddrc_data_bus_width = 0x0 - // .. .. ==> 0XF8006000[3:2] = 0x00000000U - // .. .. ==> MASK : 0x0000000CU VAL : 0x00000000U - // .. .. reg_ddrc_burst8_refresh = 0x0 - // .. .. ==> 0XF8006000[6:4] = 0x00000000U - // .. .. ==> MASK : 0x00000070U VAL : 0x00000000U - // .. .. reg_ddrc_rdwr_idle_gap = 1 - // .. .. ==> 0XF8006000[13:7] = 0x00000001U - // .. .. ==> MASK : 0x00003F80U VAL : 0x00000080U - // .. .. reg_ddrc_dis_rd_bypass = 0x0 - // .. .. ==> 0XF8006000[14:14] = 0x00000000U - // .. .. ==> MASK : 0x00004000U VAL : 0x00000000U - // .. .. reg_ddrc_dis_act_bypass = 0x0 - // .. .. ==> 0XF8006000[15:15] = 0x00000000U - // .. .. ==> MASK : 0x00008000U VAL : 0x00000000U - // .. .. reg_ddrc_dis_auto_refresh = 0x0 - // .. .. ==> 0XF8006000[16:16] = 0x00000000U - // .. .. ==> MASK : 0x00010000U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8006000, 0x0001FFFFU ,0x00000081U), - // .. .. FINISH: UNLOCK DDR - // .. .. START: CHECK DDR STATUS - // .. .. ddrc_reg_operating_mode = 1 - // .. .. ==> 0XF8006054[2:0] = 0x00000001U - // .. .. ==> MASK : 0x00000007U VAL : 0x00000001U - // .. .. - EMIT_MASKPOLL(0XF8006054, 0x00000007U), - // .. .. FINISH: CHECK DDR STATUS - // .. FINISH: DDR INITIALIZATION - // FINISH: top - // - EMIT_EXIT(), - - // -}; - -unsigned long ps7_mio_init_data_1_0[] = { - // START: top - // .. START: SLCR SETTINGS - // .. UNLOCK_KEY = 0XDF0D - // .. ==> 0XF8000008[15:0] = 0x0000DF0DU - // .. ==> MASK : 0x0000FFFFU VAL : 0x0000DF0DU - // .. - EMIT_MASKWRITE(0XF8000008, 0x0000FFFFU ,0x0000DF0DU), - // .. FINISH: SLCR SETTINGS - // .. START: OCM REMAPPING - // .. FINISH: OCM REMAPPING - // .. START: DDRIOB SETTINGS - // .. INP_POWER = 0x0 - // .. ==> 0XF8000B40[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. INP_TYPE = 0x0 - // .. ==> 0XF8000B40[2:1] = 0x00000000U - // .. ==> MASK : 0x00000006U VAL : 0x00000000U - // .. DCI_UPDATE = 0x0 - // .. ==> 0XF8000B40[3:3] = 0x00000000U - // .. ==> MASK : 0x00000008U VAL : 0x00000000U - // .. TERM_EN = 0x0 - // .. ==> 0XF8000B40[4:4] = 0x00000000U - // .. ==> MASK : 0x00000010U VAL : 0x00000000U - // .. DCR_TYPE = 0x0 - // .. ==> 0XF8000B40[6:5] = 0x00000000U - // .. ==> MASK : 0x00000060U VAL : 0x00000000U - // .. IBUF_DISABLE_MODE = 0x0 - // .. ==> 0XF8000B40[7:7] = 0x00000000U - // .. ==> MASK : 0x00000080U VAL : 0x00000000U - // .. TERM_DISABLE_MODE = 0x0 - // .. ==> 0XF8000B40[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. OUTPUT_EN = 0x3 - // .. ==> 0XF8000B40[10:9] = 0x00000003U - // .. ==> MASK : 0x00000600U VAL : 0x00000600U - // .. PULLUP_EN = 0x0 - // .. ==> 0XF8000B40[11:11] = 0x00000000U - // .. ==> MASK : 0x00000800U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000B40, 0x00000FFFU ,0x00000600U), - // .. INP_POWER = 0x0 - // .. ==> 0XF8000B44[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. INP_TYPE = 0x0 - // .. ==> 0XF8000B44[2:1] = 0x00000000U - // .. ==> MASK : 0x00000006U VAL : 0x00000000U - // .. DCI_UPDATE = 0x0 - // .. ==> 0XF8000B44[3:3] = 0x00000000U - // .. ==> MASK : 0x00000008U VAL : 0x00000000U - // .. TERM_EN = 0x0 - // .. ==> 0XF8000B44[4:4] = 0x00000000U - // .. ==> MASK : 0x00000010U VAL : 0x00000000U - // .. DCR_TYPE = 0x0 - // .. ==> 0XF8000B44[6:5] = 0x00000000U - // .. ==> MASK : 0x00000060U VAL : 0x00000000U - // .. IBUF_DISABLE_MODE = 0x0 - // .. ==> 0XF8000B44[7:7] = 0x00000000U - // .. ==> MASK : 0x00000080U VAL : 0x00000000U - // .. TERM_DISABLE_MODE = 0x0 - // .. ==> 0XF8000B44[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. OUTPUT_EN = 0x3 - // .. ==> 0XF8000B44[10:9] = 0x00000003U - // .. ==> MASK : 0x00000600U VAL : 0x00000600U - // .. PULLUP_EN = 0x0 - // .. ==> 0XF8000B44[11:11] = 0x00000000U - // .. ==> MASK : 0x00000800U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000B44, 0x00000FFFU ,0x00000600U), - // .. INP_POWER = 0x0 - // .. ==> 0XF8000B48[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. INP_TYPE = 0x1 - // .. ==> 0XF8000B48[2:1] = 0x00000001U - // .. ==> MASK : 0x00000006U VAL : 0x00000002U - // .. DCI_UPDATE = 0x0 - // .. ==> 0XF8000B48[3:3] = 0x00000000U - // .. ==> MASK : 0x00000008U VAL : 0x00000000U - // .. TERM_EN = 0x1 - // .. ==> 0XF8000B48[4:4] = 0x00000001U - // .. ==> MASK : 0x00000010U VAL : 0x00000010U - // .. DCR_TYPE = 0x3 - // .. ==> 0XF8000B48[6:5] = 0x00000003U - // .. ==> MASK : 0x00000060U VAL : 0x00000060U - // .. IBUF_DISABLE_MODE = 0 - // .. ==> 0XF8000B48[7:7] = 0x00000000U - // .. ==> MASK : 0x00000080U VAL : 0x00000000U - // .. TERM_DISABLE_MODE = 0 - // .. ==> 0XF8000B48[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. OUTPUT_EN = 0x3 - // .. ==> 0XF8000B48[10:9] = 0x00000003U - // .. ==> MASK : 0x00000600U VAL : 0x00000600U - // .. PULLUP_EN = 0x0 - // .. ==> 0XF8000B48[11:11] = 0x00000000U - // .. ==> MASK : 0x00000800U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000B48, 0x00000FFFU ,0x00000672U), - // .. INP_POWER = 0x0 - // .. ==> 0XF8000B4C[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. INP_TYPE = 0x1 - // .. ==> 0XF8000B4C[2:1] = 0x00000001U - // .. ==> MASK : 0x00000006U VAL : 0x00000002U - // .. DCI_UPDATE = 0x0 - // .. ==> 0XF8000B4C[3:3] = 0x00000000U - // .. ==> MASK : 0x00000008U VAL : 0x00000000U - // .. TERM_EN = 0x1 - // .. ==> 0XF8000B4C[4:4] = 0x00000001U - // .. ==> MASK : 0x00000010U VAL : 0x00000010U - // .. DCR_TYPE = 0x3 - // .. ==> 0XF8000B4C[6:5] = 0x00000003U - // .. ==> MASK : 0x00000060U VAL : 0x00000060U - // .. IBUF_DISABLE_MODE = 0 - // .. ==> 0XF8000B4C[7:7] = 0x00000000U - // .. ==> MASK : 0x00000080U VAL : 0x00000000U - // .. TERM_DISABLE_MODE = 0 - // .. ==> 0XF8000B4C[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. OUTPUT_EN = 0x3 - // .. ==> 0XF8000B4C[10:9] = 0x00000003U - // .. ==> MASK : 0x00000600U VAL : 0x00000600U - // .. PULLUP_EN = 0x0 - // .. ==> 0XF8000B4C[11:11] = 0x00000000U - // .. ==> MASK : 0x00000800U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000B4C, 0x00000FFFU ,0x00000672U), - // .. INP_POWER = 0x0 - // .. ==> 0XF8000B50[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. INP_TYPE = 0x2 - // .. ==> 0XF8000B50[2:1] = 0x00000002U - // .. ==> MASK : 0x00000006U VAL : 0x00000004U - // .. DCI_UPDATE = 0x0 - // .. ==> 0XF8000B50[3:3] = 0x00000000U - // .. ==> MASK : 0x00000008U VAL : 0x00000000U - // .. TERM_EN = 0x1 - // .. ==> 0XF8000B50[4:4] = 0x00000001U - // .. ==> MASK : 0x00000010U VAL : 0x00000010U - // .. DCR_TYPE = 0x3 - // .. ==> 0XF8000B50[6:5] = 0x00000003U - // .. ==> MASK : 0x00000060U VAL : 0x00000060U - // .. IBUF_DISABLE_MODE = 0 - // .. ==> 0XF8000B50[7:7] = 0x00000000U - // .. ==> MASK : 0x00000080U VAL : 0x00000000U - // .. TERM_DISABLE_MODE = 0 - // .. ==> 0XF8000B50[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. OUTPUT_EN = 0x3 - // .. ==> 0XF8000B50[10:9] = 0x00000003U - // .. ==> MASK : 0x00000600U VAL : 0x00000600U - // .. PULLUP_EN = 0x0 - // .. ==> 0XF8000B50[11:11] = 0x00000000U - // .. ==> MASK : 0x00000800U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000B50, 0x00000FFFU ,0x00000674U), - // .. INP_POWER = 0x0 - // .. ==> 0XF8000B54[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. INP_TYPE = 0x2 - // .. ==> 0XF8000B54[2:1] = 0x00000002U - // .. ==> MASK : 0x00000006U VAL : 0x00000004U - // .. DCI_UPDATE = 0x0 - // .. ==> 0XF8000B54[3:3] = 0x00000000U - // .. ==> MASK : 0x00000008U VAL : 0x00000000U - // .. TERM_EN = 0x1 - // .. ==> 0XF8000B54[4:4] = 0x00000001U - // .. ==> MASK : 0x00000010U VAL : 0x00000010U - // .. DCR_TYPE = 0x3 - // .. ==> 0XF8000B54[6:5] = 0x00000003U - // .. ==> MASK : 0x00000060U VAL : 0x00000060U - // .. IBUF_DISABLE_MODE = 0 - // .. ==> 0XF8000B54[7:7] = 0x00000000U - // .. ==> MASK : 0x00000080U VAL : 0x00000000U - // .. TERM_DISABLE_MODE = 0 - // .. ==> 0XF8000B54[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. OUTPUT_EN = 0x3 - // .. ==> 0XF8000B54[10:9] = 0x00000003U - // .. ==> MASK : 0x00000600U VAL : 0x00000600U - // .. PULLUP_EN = 0x0 - // .. ==> 0XF8000B54[11:11] = 0x00000000U - // .. ==> MASK : 0x00000800U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000B54, 0x00000FFFU ,0x00000674U), - // .. INP_POWER = 0x0 - // .. ==> 0XF8000B58[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. INP_TYPE = 0x0 - // .. ==> 0XF8000B58[2:1] = 0x00000000U - // .. ==> MASK : 0x00000006U VAL : 0x00000000U - // .. DCI_UPDATE = 0x0 - // .. ==> 0XF8000B58[3:3] = 0x00000000U - // .. ==> MASK : 0x00000008U VAL : 0x00000000U - // .. TERM_EN = 0x0 - // .. ==> 0XF8000B58[4:4] = 0x00000000U - // .. ==> MASK : 0x00000010U VAL : 0x00000000U - // .. DCR_TYPE = 0x0 - // .. ==> 0XF8000B58[6:5] = 0x00000000U - // .. ==> MASK : 0x00000060U VAL : 0x00000000U - // .. IBUF_DISABLE_MODE = 0x0 - // .. ==> 0XF8000B58[7:7] = 0x00000000U - // .. ==> MASK : 0x00000080U VAL : 0x00000000U - // .. TERM_DISABLE_MODE = 0x0 - // .. ==> 0XF8000B58[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. OUTPUT_EN = 0x3 - // .. ==> 0XF8000B58[10:9] = 0x00000003U - // .. ==> MASK : 0x00000600U VAL : 0x00000600U - // .. PULLUP_EN = 0x0 - // .. ==> 0XF8000B58[11:11] = 0x00000000U - // .. ==> MASK : 0x00000800U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000B58, 0x00000FFFU ,0x00000600U), - // .. DRIVE_P = 0x1c - // .. ==> 0XF8000B5C[6:0] = 0x0000001CU - // .. ==> MASK : 0x0000007FU VAL : 0x0000001CU - // .. DRIVE_N = 0xc - // .. ==> 0XF8000B5C[13:7] = 0x0000000CU - // .. ==> MASK : 0x00003F80U VAL : 0x00000600U - // .. SLEW_P = 0x3 - // .. ==> 0XF8000B5C[18:14] = 0x00000003U - // .. ==> MASK : 0x0007C000U VAL : 0x0000C000U - // .. SLEW_N = 0x3 - // .. ==> 0XF8000B5C[23:19] = 0x00000003U - // .. ==> MASK : 0x00F80000U VAL : 0x00180000U - // .. GTL = 0x0 - // .. ==> 0XF8000B5C[26:24] = 0x00000000U - // .. ==> MASK : 0x07000000U VAL : 0x00000000U - // .. RTERM = 0x0 - // .. ==> 0XF8000B5C[31:27] = 0x00000000U - // .. ==> MASK : 0xF8000000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000B5C, 0xFFFFFFFFU ,0x0018C61CU), - // .. DRIVE_P = 0x1c - // .. ==> 0XF8000B60[6:0] = 0x0000001CU - // .. ==> MASK : 0x0000007FU VAL : 0x0000001CU - // .. DRIVE_N = 0xc - // .. ==> 0XF8000B60[13:7] = 0x0000000CU - // .. ==> MASK : 0x00003F80U VAL : 0x00000600U - // .. SLEW_P = 0x6 - // .. ==> 0XF8000B60[18:14] = 0x00000006U - // .. ==> MASK : 0x0007C000U VAL : 0x00018000U - // .. SLEW_N = 0x1f - // .. ==> 0XF8000B60[23:19] = 0x0000001FU - // .. ==> MASK : 0x00F80000U VAL : 0x00F80000U - // .. GTL = 0x0 - // .. ==> 0XF8000B60[26:24] = 0x00000000U - // .. ==> MASK : 0x07000000U VAL : 0x00000000U - // .. RTERM = 0x0 - // .. ==> 0XF8000B60[31:27] = 0x00000000U - // .. ==> MASK : 0xF8000000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000B60, 0xFFFFFFFFU ,0x00F9861CU), - // .. DRIVE_P = 0x1c - // .. ==> 0XF8000B64[6:0] = 0x0000001CU - // .. ==> MASK : 0x0000007FU VAL : 0x0000001CU - // .. DRIVE_N = 0xc - // .. ==> 0XF8000B64[13:7] = 0x0000000CU - // .. ==> MASK : 0x00003F80U VAL : 0x00000600U - // .. SLEW_P = 0x6 - // .. ==> 0XF8000B64[18:14] = 0x00000006U - // .. ==> MASK : 0x0007C000U VAL : 0x00018000U - // .. SLEW_N = 0x1f - // .. ==> 0XF8000B64[23:19] = 0x0000001FU - // .. ==> MASK : 0x00F80000U VAL : 0x00F80000U - // .. GTL = 0x0 - // .. ==> 0XF8000B64[26:24] = 0x00000000U - // .. ==> MASK : 0x07000000U VAL : 0x00000000U - // .. RTERM = 0x0 - // .. ==> 0XF8000B64[31:27] = 0x00000000U - // .. ==> MASK : 0xF8000000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000B64, 0xFFFFFFFFU ,0x00F9861CU), - // .. DRIVE_P = 0x1c - // .. ==> 0XF8000B68[6:0] = 0x0000001CU - // .. ==> MASK : 0x0000007FU VAL : 0x0000001CU - // .. DRIVE_N = 0xc - // .. ==> 0XF8000B68[13:7] = 0x0000000CU - // .. ==> MASK : 0x00003F80U VAL : 0x00000600U - // .. SLEW_P = 0x6 - // .. ==> 0XF8000B68[18:14] = 0x00000006U - // .. ==> MASK : 0x0007C000U VAL : 0x00018000U - // .. SLEW_N = 0x1f - // .. ==> 0XF8000B68[23:19] = 0x0000001FU - // .. ==> MASK : 0x00F80000U VAL : 0x00F80000U - // .. GTL = 0x0 - // .. ==> 0XF8000B68[26:24] = 0x00000000U - // .. ==> MASK : 0x07000000U VAL : 0x00000000U - // .. RTERM = 0x0 - // .. ==> 0XF8000B68[31:27] = 0x00000000U - // .. ==> MASK : 0xF8000000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000B68, 0xFFFFFFFFU ,0x00F9861CU), - // .. VREF_INT_EN = 0x1 - // .. ==> 0XF8000B6C[0:0] = 0x00000001U - // .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. VREF_SEL = 0x4 - // .. ==> 0XF8000B6C[4:1] = 0x00000004U - // .. ==> MASK : 0x0000001EU VAL : 0x00000008U - // .. VREF_EXT_EN = 0x0 - // .. ==> 0XF8000B6C[6:5] = 0x00000000U - // .. ==> MASK : 0x00000060U VAL : 0x00000000U - // .. VREF_PULLUP_EN = 0x0 - // .. ==> 0XF8000B6C[8:7] = 0x00000000U - // .. ==> MASK : 0x00000180U VAL : 0x00000000U - // .. REFIO_EN = 0x1 - // .. ==> 0XF8000B6C[9:9] = 0x00000001U - // .. ==> MASK : 0x00000200U VAL : 0x00000200U - // .. REFIO_PULLUP_EN = 0x0 - // .. ==> 0XF8000B6C[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DRST_B_PULLUP_EN = 0x0 - // .. ==> 0XF8000B6C[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. CKE_PULLUP_EN = 0x0 - // .. ==> 0XF8000B6C[14:14] = 0x00000000U - // .. ==> MASK : 0x00004000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000B6C, 0x000073FFU ,0x00000209U), - // .. .. START: ASSERT RESET - // .. .. RESET = 1 - // .. .. ==> 0XF8000B70[0:0] = 0x00000001U - // .. .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. .. VRN_OUT = 0x1 - // .. .. ==> 0XF8000B70[5:5] = 0x00000001U - // .. .. ==> MASK : 0x00000020U VAL : 0x00000020U - // .. .. - EMIT_MASKWRITE(0XF8000B70, 0x00000021U ,0x00000021U), - // .. .. FINISH: ASSERT RESET - // .. .. START: DEASSERT RESET - // .. .. RESET = 0 - // .. .. ==> 0XF8000B70[0:0] = 0x00000000U - // .. .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. .. VRN_OUT = 0x1 - // .. .. ==> 0XF8000B70[5:5] = 0x00000001U - // .. .. ==> MASK : 0x00000020U VAL : 0x00000020U - // .. .. - EMIT_MASKWRITE(0XF8000B70, 0x00000021U ,0x00000020U), - // .. .. FINISH: DEASSERT RESET - // .. .. RESET = 0x1 - // .. .. ==> 0XF8000B70[0:0] = 0x00000001U - // .. .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. .. ENABLE = 0x1 - // .. .. ==> 0XF8000B70[1:1] = 0x00000001U - // .. .. ==> MASK : 0x00000002U VAL : 0x00000002U - // .. .. VRP_TRI = 0x0 - // .. .. ==> 0XF8000B70[2:2] = 0x00000000U - // .. .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. .. VRN_TRI = 0x0 - // .. .. ==> 0XF8000B70[3:3] = 0x00000000U - // .. .. ==> MASK : 0x00000008U VAL : 0x00000000U - // .. .. VRP_OUT = 0x0 - // .. .. ==> 0XF8000B70[4:4] = 0x00000000U - // .. .. ==> MASK : 0x00000010U VAL : 0x00000000U - // .. .. VRN_OUT = 0x1 - // .. .. ==> 0XF8000B70[5:5] = 0x00000001U - // .. .. ==> MASK : 0x00000020U VAL : 0x00000020U - // .. .. NREF_OPT1 = 0x0 - // .. .. ==> 0XF8000B70[7:6] = 0x00000000U - // .. .. ==> MASK : 0x000000C0U VAL : 0x00000000U - // .. .. NREF_OPT2 = 0x0 - // .. .. ==> 0XF8000B70[10:8] = 0x00000000U - // .. .. ==> MASK : 0x00000700U VAL : 0x00000000U - // .. .. NREF_OPT4 = 0x1 - // .. .. ==> 0XF8000B70[13:11] = 0x00000001U - // .. .. ==> MASK : 0x00003800U VAL : 0x00000800U - // .. .. PREF_OPT1 = 0x0 - // .. .. ==> 0XF8000B70[16:14] = 0x00000000U - // .. .. ==> MASK : 0x0001C000U VAL : 0x00000000U - // .. .. PREF_OPT2 = 0x0 - // .. .. ==> 0XF8000B70[19:17] = 0x00000000U - // .. .. ==> MASK : 0x000E0000U VAL : 0x00000000U - // .. .. UPDATE_CONTROL = 0x0 - // .. .. ==> 0XF8000B70[20:20] = 0x00000000U - // .. .. ==> MASK : 0x00100000U VAL : 0x00000000U - // .. .. INIT_COMPLETE = 0x0 - // .. .. ==> 0XF8000B70[21:21] = 0x00000000U - // .. .. ==> MASK : 0x00200000U VAL : 0x00000000U - // .. .. TST_CLK = 0x0 - // .. .. ==> 0XF8000B70[22:22] = 0x00000000U - // .. .. ==> MASK : 0x00400000U VAL : 0x00000000U - // .. .. TST_HLN = 0x0 - // .. .. ==> 0XF8000B70[23:23] = 0x00000000U - // .. .. ==> MASK : 0x00800000U VAL : 0x00000000U - // .. .. TST_HLP = 0x0 - // .. .. ==> 0XF8000B70[24:24] = 0x00000000U - // .. .. ==> MASK : 0x01000000U VAL : 0x00000000U - // .. .. TST_RST = 0x0 - // .. .. ==> 0XF8000B70[25:25] = 0x00000000U - // .. .. ==> MASK : 0x02000000U VAL : 0x00000000U - // .. .. INT_DCI_EN = 0x0 - // .. .. ==> 0XF8000B70[26:26] = 0x00000000U - // .. .. ==> MASK : 0x04000000U VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8000B70, 0x07FFFFFFU ,0x00000823U), - // .. FINISH: DDRIOB SETTINGS - // .. START: MIO PROGRAMMING - // .. TRI_ENABLE = 0 - // .. ==> 0XF8000700[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF8000700[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 0 - // .. ==> 0XF8000700[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF8000700[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF8000700[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF8000700[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 3 - // .. ==> 0XF8000700[11:9] = 0x00000003U - // .. ==> MASK : 0x00000E00U VAL : 0x00000600U - // .. PULLUP = 0 - // .. ==> 0XF8000700[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000700[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000700, 0x00003FFFU ,0x00000600U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF8000704[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 1 - // .. ==> 0XF8000704[1:1] = 0x00000001U - // .. ==> MASK : 0x00000002U VAL : 0x00000002U - // .. L1_SEL = 0 - // .. ==> 0XF8000704[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF8000704[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF8000704[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF8000704[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 3 - // .. ==> 0XF8000704[11:9] = 0x00000003U - // .. ==> MASK : 0x00000E00U VAL : 0x00000600U - // .. PULLUP = 0 - // .. ==> 0XF8000704[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000704[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000704, 0x00003FFFU ,0x00000602U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF8000708[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 1 - // .. ==> 0XF8000708[1:1] = 0x00000001U - // .. ==> MASK : 0x00000002U VAL : 0x00000002U - // .. L1_SEL = 0 - // .. ==> 0XF8000708[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF8000708[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF8000708[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF8000708[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 3 - // .. ==> 0XF8000708[11:9] = 0x00000003U - // .. ==> MASK : 0x00000E00U VAL : 0x00000600U - // .. PULLUP = 0 - // .. ==> 0XF8000708[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000708[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000708, 0x00003FFFU ,0x00000602U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF800070C[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 1 - // .. ==> 0XF800070C[1:1] = 0x00000001U - // .. ==> MASK : 0x00000002U VAL : 0x00000002U - // .. L1_SEL = 0 - // .. ==> 0XF800070C[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF800070C[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF800070C[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF800070C[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 3 - // .. ==> 0XF800070C[11:9] = 0x00000003U - // .. ==> MASK : 0x00000E00U VAL : 0x00000600U - // .. PULLUP = 0 - // .. ==> 0XF800070C[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF800070C[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF800070C, 0x00003FFFU ,0x00000602U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF8000710[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 1 - // .. ==> 0XF8000710[1:1] = 0x00000001U - // .. ==> MASK : 0x00000002U VAL : 0x00000002U - // .. L1_SEL = 0 - // .. ==> 0XF8000710[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF8000710[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF8000710[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF8000710[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 3 - // .. ==> 0XF8000710[11:9] = 0x00000003U - // .. ==> MASK : 0x00000E00U VAL : 0x00000600U - // .. PULLUP = 0 - // .. ==> 0XF8000710[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000710[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000710, 0x00003FFFU ,0x00000602U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF8000714[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 1 - // .. ==> 0XF8000714[1:1] = 0x00000001U - // .. ==> MASK : 0x00000002U VAL : 0x00000002U - // .. L1_SEL = 0 - // .. ==> 0XF8000714[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF8000714[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF8000714[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF8000714[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 3 - // .. ==> 0XF8000714[11:9] = 0x00000003U - // .. ==> MASK : 0x00000E00U VAL : 0x00000600U - // .. PULLUP = 0 - // .. ==> 0XF8000714[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000714[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000714, 0x00003FFFU ,0x00000602U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF8000718[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 1 - // .. ==> 0XF8000718[1:1] = 0x00000001U - // .. ==> MASK : 0x00000002U VAL : 0x00000002U - // .. L1_SEL = 0 - // .. ==> 0XF8000718[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF8000718[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF8000718[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF8000718[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 3 - // .. ==> 0XF8000718[11:9] = 0x00000003U - // .. ==> MASK : 0x00000E00U VAL : 0x00000600U - // .. PULLUP = 0 - // .. ==> 0XF8000718[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000718[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000718, 0x00003FFFU ,0x00000602U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF800071C[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF800071C[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 0 - // .. ==> 0XF800071C[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF800071C[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF800071C[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF800071C[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 3 - // .. ==> 0XF800071C[11:9] = 0x00000003U - // .. ==> MASK : 0x00000E00U VAL : 0x00000600U - // .. PULLUP = 0 - // .. ==> 0XF800071C[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF800071C[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF800071C, 0x00003FFFU ,0x00000600U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF8000720[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 1 - // .. ==> 0XF8000720[1:1] = 0x00000001U - // .. ==> MASK : 0x00000002U VAL : 0x00000002U - // .. L1_SEL = 0 - // .. ==> 0XF8000720[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF8000720[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF8000720[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF8000720[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 3 - // .. ==> 0XF8000720[11:9] = 0x00000003U - // .. ==> MASK : 0x00000E00U VAL : 0x00000600U - // .. PULLUP = 0 - // .. ==> 0XF8000720[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000720[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000720, 0x00003FFFU ,0x00000602U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF8000724[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF8000724[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 0 - // .. ==> 0XF8000724[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF8000724[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF8000724[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF8000724[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 3 - // .. ==> 0XF8000724[11:9] = 0x00000003U - // .. ==> MASK : 0x00000E00U VAL : 0x00000600U - // .. PULLUP = 0 - // .. ==> 0XF8000724[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000724[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000724, 0x00003FFFU ,0x00000600U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF8000728[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF8000728[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 0 - // .. ==> 0XF8000728[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF8000728[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 4 - // .. ==> 0XF8000728[7:5] = 0x00000004U - // .. ==> MASK : 0x000000E0U VAL : 0x00000080U - // .. Speed = 0 - // .. ==> 0XF8000728[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 3 - // .. ==> 0XF8000728[11:9] = 0x00000003U - // .. ==> MASK : 0x00000E00U VAL : 0x00000600U - // .. PULLUP = 0 - // .. ==> 0XF8000728[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000728[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000728, 0x00003FFFU ,0x00000680U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF800072C[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF800072C[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 0 - // .. ==> 0XF800072C[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF800072C[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 4 - // .. ==> 0XF800072C[7:5] = 0x00000004U - // .. ==> MASK : 0x000000E0U VAL : 0x00000080U - // .. Speed = 0 - // .. ==> 0XF800072C[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 3 - // .. ==> 0XF800072C[11:9] = 0x00000003U - // .. ==> MASK : 0x00000E00U VAL : 0x00000600U - // .. PULLUP = 0 - // .. ==> 0XF800072C[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF800072C[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF800072C, 0x00003FFFU ,0x00000680U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF8000730[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF8000730[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 0 - // .. ==> 0XF8000730[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF8000730[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 4 - // .. ==> 0XF8000730[7:5] = 0x00000004U - // .. ==> MASK : 0x000000E0U VAL : 0x00000080U - // .. Speed = 0 - // .. ==> 0XF8000730[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 3 - // .. ==> 0XF8000730[11:9] = 0x00000003U - // .. ==> MASK : 0x00000E00U VAL : 0x00000600U - // .. PULLUP = 0 - // .. ==> 0XF8000730[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000730[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000730, 0x00003FFFU ,0x00000680U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF8000734[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF8000734[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 0 - // .. ==> 0XF8000734[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF8000734[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 4 - // .. ==> 0XF8000734[7:5] = 0x00000004U - // .. ==> MASK : 0x000000E0U VAL : 0x00000080U - // .. Speed = 0 - // .. ==> 0XF8000734[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 3 - // .. ==> 0XF8000734[11:9] = 0x00000003U - // .. ==> MASK : 0x00000E00U VAL : 0x00000600U - // .. PULLUP = 0 - // .. ==> 0XF8000734[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000734[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000734, 0x00003FFFU ,0x00000680U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF8000738[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF8000738[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 0 - // .. ==> 0XF8000738[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF8000738[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 4 - // .. ==> 0XF8000738[7:5] = 0x00000004U - // .. ==> MASK : 0x000000E0U VAL : 0x00000080U - // .. Speed = 0 - // .. ==> 0XF8000738[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 3 - // .. ==> 0XF8000738[11:9] = 0x00000003U - // .. ==> MASK : 0x00000E00U VAL : 0x00000600U - // .. PULLUP = 0 - // .. ==> 0XF8000738[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000738[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000738, 0x00003FFFU ,0x00000680U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF800073C[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF800073C[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 0 - // .. ==> 0XF800073C[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF800073C[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 4 - // .. ==> 0XF800073C[7:5] = 0x00000004U - // .. ==> MASK : 0x000000E0U VAL : 0x00000080U - // .. Speed = 0 - // .. ==> 0XF800073C[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 3 - // .. ==> 0XF800073C[11:9] = 0x00000003U - // .. ==> MASK : 0x00000E00U VAL : 0x00000600U - // .. PULLUP = 0 - // .. ==> 0XF800073C[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF800073C[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF800073C, 0x00003FFFU ,0x00000680U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF8000740[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 1 - // .. ==> 0XF8000740[1:1] = 0x00000001U - // .. ==> MASK : 0x00000002U VAL : 0x00000002U - // .. L1_SEL = 0 - // .. ==> 0XF8000740[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF8000740[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF8000740[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF8000740[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF8000740[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF8000740[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000740[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000740, 0x00003FFFU ,0x00000202U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF8000744[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 1 - // .. ==> 0XF8000744[1:1] = 0x00000001U - // .. ==> MASK : 0x00000002U VAL : 0x00000002U - // .. L1_SEL = 0 - // .. ==> 0XF8000744[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF8000744[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF8000744[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF8000744[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF8000744[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF8000744[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000744[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000744, 0x00003FFFU ,0x00000202U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF8000748[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 1 - // .. ==> 0XF8000748[1:1] = 0x00000001U - // .. ==> MASK : 0x00000002U VAL : 0x00000002U - // .. L1_SEL = 0 - // .. ==> 0XF8000748[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF8000748[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF8000748[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF8000748[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF8000748[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF8000748[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000748[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000748, 0x00003FFFU ,0x00000202U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF800074C[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 1 - // .. ==> 0XF800074C[1:1] = 0x00000001U - // .. ==> MASK : 0x00000002U VAL : 0x00000002U - // .. L1_SEL = 0 - // .. ==> 0XF800074C[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF800074C[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF800074C[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF800074C[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF800074C[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF800074C[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF800074C[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF800074C, 0x00003FFFU ,0x00000202U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF8000750[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 1 - // .. ==> 0XF8000750[1:1] = 0x00000001U - // .. ==> MASK : 0x00000002U VAL : 0x00000002U - // .. L1_SEL = 0 - // .. ==> 0XF8000750[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF8000750[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF8000750[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF8000750[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF8000750[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF8000750[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000750[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000750, 0x00003FFFU ,0x00000202U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF8000754[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 1 - // .. ==> 0XF8000754[1:1] = 0x00000001U - // .. ==> MASK : 0x00000002U VAL : 0x00000002U - // .. L1_SEL = 0 - // .. ==> 0XF8000754[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF8000754[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF8000754[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF8000754[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF8000754[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF8000754[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000754[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000754, 0x00003FFFU ,0x00000202U), - // .. TRI_ENABLE = 1 - // .. ==> 0XF8000758[0:0] = 0x00000001U - // .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. L0_SEL = 1 - // .. ==> 0XF8000758[1:1] = 0x00000001U - // .. ==> MASK : 0x00000002U VAL : 0x00000002U - // .. L1_SEL = 0 - // .. ==> 0XF8000758[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF8000758[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF8000758[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF8000758[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF8000758[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF8000758[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000758[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000758, 0x00003FFFU ,0x00000203U), - // .. TRI_ENABLE = 1 - // .. ==> 0XF800075C[0:0] = 0x00000001U - // .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. L0_SEL = 1 - // .. ==> 0XF800075C[1:1] = 0x00000001U - // .. ==> MASK : 0x00000002U VAL : 0x00000002U - // .. L1_SEL = 0 - // .. ==> 0XF800075C[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF800075C[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF800075C[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF800075C[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF800075C[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF800075C[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF800075C[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF800075C, 0x00003FFFU ,0x00000203U), - // .. TRI_ENABLE = 1 - // .. ==> 0XF8000760[0:0] = 0x00000001U - // .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. L0_SEL = 1 - // .. ==> 0XF8000760[1:1] = 0x00000001U - // .. ==> MASK : 0x00000002U VAL : 0x00000002U - // .. L1_SEL = 0 - // .. ==> 0XF8000760[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF8000760[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF8000760[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF8000760[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF8000760[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF8000760[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000760[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000760, 0x00003FFFU ,0x00000203U), - // .. TRI_ENABLE = 1 - // .. ==> 0XF8000764[0:0] = 0x00000001U - // .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. L0_SEL = 1 - // .. ==> 0XF8000764[1:1] = 0x00000001U - // .. ==> MASK : 0x00000002U VAL : 0x00000002U - // .. L1_SEL = 0 - // .. ==> 0XF8000764[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF8000764[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF8000764[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF8000764[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF8000764[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF8000764[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000764[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000764, 0x00003FFFU ,0x00000203U), - // .. TRI_ENABLE = 1 - // .. ==> 0XF8000768[0:0] = 0x00000001U - // .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. L0_SEL = 1 - // .. ==> 0XF8000768[1:1] = 0x00000001U - // .. ==> MASK : 0x00000002U VAL : 0x00000002U - // .. L1_SEL = 0 - // .. ==> 0XF8000768[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF8000768[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF8000768[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF8000768[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF8000768[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF8000768[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000768[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000768, 0x00003FFFU ,0x00000203U), - // .. TRI_ENABLE = 1 - // .. ==> 0XF800076C[0:0] = 0x00000001U - // .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. L0_SEL = 1 - // .. ==> 0XF800076C[1:1] = 0x00000001U - // .. ==> MASK : 0x00000002U VAL : 0x00000002U - // .. L1_SEL = 0 - // .. ==> 0XF800076C[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF800076C[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF800076C[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF800076C[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF800076C[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF800076C[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF800076C[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF800076C, 0x00003FFFU ,0x00000203U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF8000770[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF8000770[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 1 - // .. ==> 0XF8000770[2:2] = 0x00000001U - // .. ==> MASK : 0x00000004U VAL : 0x00000004U - // .. L2_SEL = 0 - // .. ==> 0XF8000770[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF8000770[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF8000770[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF8000770[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF8000770[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000770[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000770, 0x00003FFFU ,0x00000204U), - // .. TRI_ENABLE = 1 - // .. ==> 0XF8000774[0:0] = 0x00000001U - // .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. L0_SEL = 0 - // .. ==> 0XF8000774[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 1 - // .. ==> 0XF8000774[2:2] = 0x00000001U - // .. ==> MASK : 0x00000004U VAL : 0x00000004U - // .. L2_SEL = 0 - // .. ==> 0XF8000774[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF8000774[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF8000774[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF8000774[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF8000774[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000774[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000774, 0x00003FFFU ,0x00000205U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF8000778[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF8000778[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 1 - // .. ==> 0XF8000778[2:2] = 0x00000001U - // .. ==> MASK : 0x00000004U VAL : 0x00000004U - // .. L2_SEL = 0 - // .. ==> 0XF8000778[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF8000778[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF8000778[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF8000778[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF8000778[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000778[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000778, 0x00003FFFU ,0x00000204U), - // .. TRI_ENABLE = 1 - // .. ==> 0XF800077C[0:0] = 0x00000001U - // .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. L0_SEL = 0 - // .. ==> 0XF800077C[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 1 - // .. ==> 0XF800077C[2:2] = 0x00000001U - // .. ==> MASK : 0x00000004U VAL : 0x00000004U - // .. L2_SEL = 0 - // .. ==> 0XF800077C[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF800077C[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF800077C[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF800077C[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF800077C[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF800077C[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF800077C, 0x00003FFFU ,0x00000205U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF8000780[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF8000780[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 1 - // .. ==> 0XF8000780[2:2] = 0x00000001U - // .. ==> MASK : 0x00000004U VAL : 0x00000004U - // .. L2_SEL = 0 - // .. ==> 0XF8000780[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF8000780[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF8000780[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF8000780[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF8000780[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000780[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000780, 0x00003FFFU ,0x00000204U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF8000784[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF8000784[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 1 - // .. ==> 0XF8000784[2:2] = 0x00000001U - // .. ==> MASK : 0x00000004U VAL : 0x00000004U - // .. L2_SEL = 0 - // .. ==> 0XF8000784[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF8000784[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF8000784[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF8000784[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF8000784[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000784[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000784, 0x00003FFFU ,0x00000204U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF8000788[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF8000788[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 1 - // .. ==> 0XF8000788[2:2] = 0x00000001U - // .. ==> MASK : 0x00000004U VAL : 0x00000004U - // .. L2_SEL = 0 - // .. ==> 0XF8000788[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF8000788[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF8000788[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF8000788[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF8000788[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000788[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000788, 0x00003FFFU ,0x00000204U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF800078C[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF800078C[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 1 - // .. ==> 0XF800078C[2:2] = 0x00000001U - // .. ==> MASK : 0x00000004U VAL : 0x00000004U - // .. L2_SEL = 0 - // .. ==> 0XF800078C[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF800078C[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF800078C[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF800078C[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF800078C[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF800078C[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF800078C, 0x00003FFFU ,0x00000204U), - // .. TRI_ENABLE = 1 - // .. ==> 0XF8000790[0:0] = 0x00000001U - // .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. L0_SEL = 0 - // .. ==> 0XF8000790[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 1 - // .. ==> 0XF8000790[2:2] = 0x00000001U - // .. ==> MASK : 0x00000004U VAL : 0x00000004U - // .. L2_SEL = 0 - // .. ==> 0XF8000790[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF8000790[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF8000790[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF8000790[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF8000790[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000790[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000790, 0x00003FFFU ,0x00000205U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF8000794[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF8000794[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 1 - // .. ==> 0XF8000794[2:2] = 0x00000001U - // .. ==> MASK : 0x00000004U VAL : 0x00000004U - // .. L2_SEL = 0 - // .. ==> 0XF8000794[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF8000794[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF8000794[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF8000794[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF8000794[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000794[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000794, 0x00003FFFU ,0x00000204U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF8000798[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF8000798[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 1 - // .. ==> 0XF8000798[2:2] = 0x00000001U - // .. ==> MASK : 0x00000004U VAL : 0x00000004U - // .. L2_SEL = 0 - // .. ==> 0XF8000798[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF8000798[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF8000798[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF8000798[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF8000798[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF8000798[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000798, 0x00003FFFU ,0x00000204U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF800079C[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF800079C[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 1 - // .. ==> 0XF800079C[2:2] = 0x00000001U - // .. ==> MASK : 0x00000004U VAL : 0x00000004U - // .. L2_SEL = 0 - // .. ==> 0XF800079C[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF800079C[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF800079C[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF800079C[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF800079C[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF800079C[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF800079C, 0x00003FFFU ,0x00000204U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF80007A0[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF80007A0[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 0 - // .. ==> 0XF80007A0[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF80007A0[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF80007A0[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF80007A0[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF80007A0[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF80007A0[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF80007A0[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF80007A0, 0x00003FFFU ,0x00000200U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF80007A4[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF80007A4[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 0 - // .. ==> 0XF80007A4[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF80007A4[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF80007A4[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF80007A4[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF80007A4[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF80007A4[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF80007A4[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF80007A4, 0x00003FFFU ,0x00000200U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF80007A8[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF80007A8[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 0 - // .. ==> 0XF80007A8[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF80007A8[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF80007A8[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF80007A8[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF80007A8[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF80007A8[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF80007A8[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF80007A8, 0x00003FFFU ,0x00000200U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF80007AC[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF80007AC[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 0 - // .. ==> 0XF80007AC[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF80007AC[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF80007AC[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF80007AC[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF80007AC[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF80007AC[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF80007AC[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF80007AC, 0x00003FFFU ,0x00000200U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF80007B0[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF80007B0[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 0 - // .. ==> 0XF80007B0[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF80007B0[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF80007B0[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF80007B0[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF80007B0[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF80007B0[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF80007B0[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF80007B0, 0x00003FFFU ,0x00000200U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF80007B4[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF80007B4[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 0 - // .. ==> 0XF80007B4[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF80007B4[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF80007B4[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF80007B4[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF80007B4[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF80007B4[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF80007B4[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF80007B4, 0x00003FFFU ,0x00000200U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF80007B8[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF80007B8[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 0 - // .. ==> 0XF80007B8[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF80007B8[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF80007B8[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF80007B8[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF80007B8[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF80007B8[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF80007B8[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF80007B8, 0x00003FFFU ,0x00000200U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF80007BC[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF80007BC[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 0 - // .. ==> 0XF80007BC[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF80007BC[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF80007BC[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF80007BC[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF80007BC[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF80007BC[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF80007BC[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF80007BC, 0x00003FFFU ,0x00000200U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF80007C0[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF80007C0[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 0 - // .. ==> 0XF80007C0[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF80007C0[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 7 - // .. ==> 0XF80007C0[7:5] = 0x00000007U - // .. ==> MASK : 0x000000E0U VAL : 0x000000E0U - // .. Speed = 0 - // .. ==> 0XF80007C0[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF80007C0[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF80007C0[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF80007C0[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF80007C0, 0x00003FFFU ,0x000002E0U), - // .. TRI_ENABLE = 1 - // .. ==> 0XF80007C4[0:0] = 0x00000001U - // .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. L0_SEL = 0 - // .. ==> 0XF80007C4[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 0 - // .. ==> 0XF80007C4[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF80007C4[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 7 - // .. ==> 0XF80007C4[7:5] = 0x00000007U - // .. ==> MASK : 0x000000E0U VAL : 0x000000E0U - // .. Speed = 0 - // .. ==> 0XF80007C4[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF80007C4[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF80007C4[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF80007C4[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF80007C4, 0x00003FFFU ,0x000002E1U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF80007C8[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF80007C8[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 0 - // .. ==> 0XF80007C8[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF80007C8[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF80007C8[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF80007C8[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF80007C8[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF80007C8[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF80007C8[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF80007C8, 0x00003FFFU ,0x00000200U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF80007CC[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF80007CC[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 0 - // .. ==> 0XF80007CC[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF80007CC[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 0 - // .. ==> 0XF80007CC[7:5] = 0x00000000U - // .. ==> MASK : 0x000000E0U VAL : 0x00000000U - // .. Speed = 0 - // .. ==> 0XF80007CC[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF80007CC[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF80007CC[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF80007CC[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF80007CC, 0x00003FFFU ,0x00000200U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF80007D0[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF80007D0[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 0 - // .. ==> 0XF80007D0[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF80007D0[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 4 - // .. ==> 0XF80007D0[7:5] = 0x00000004U - // .. ==> MASK : 0x000000E0U VAL : 0x00000080U - // .. Speed = 0 - // .. ==> 0XF80007D0[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF80007D0[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF80007D0[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF80007D0[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF80007D0, 0x00003FFFU ,0x00000280U), - // .. TRI_ENABLE = 0 - // .. ==> 0XF80007D4[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. L0_SEL = 0 - // .. ==> 0XF80007D4[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. L1_SEL = 0 - // .. ==> 0XF80007D4[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. L2_SEL = 0 - // .. ==> 0XF80007D4[4:3] = 0x00000000U - // .. ==> MASK : 0x00000018U VAL : 0x00000000U - // .. L3_SEL = 4 - // .. ==> 0XF80007D4[7:5] = 0x00000004U - // .. ==> MASK : 0x000000E0U VAL : 0x00000080U - // .. Speed = 0 - // .. ==> 0XF80007D4[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. IO_Type = 1 - // .. ==> 0XF80007D4[11:9] = 0x00000001U - // .. ==> MASK : 0x00000E00U VAL : 0x00000200U - // .. PULLUP = 0 - // .. ==> 0XF80007D4[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. DisableRcvr = 0 - // .. ==> 0XF80007D4[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF80007D4, 0x00003FFFU ,0x00000280U), - // .. SDIO1_CD_SEL = 58 - // .. ==> 0XF8000834[21:16] = 0x0000003AU - // .. ==> MASK : 0x003F0000U VAL : 0x003A0000U - // .. - EMIT_MASKWRITE(0XF8000834, 0x003F0000U ,0x003A0000U), - // .. FINISH: MIO PROGRAMMING - // .. START: LOCK IT BACK - // .. LOCK_KEY = 0X767B - // .. ==> 0XF8000004[15:0] = 0x0000767BU - // .. ==> MASK : 0x0000FFFFU VAL : 0x0000767BU - // .. - EMIT_MASKWRITE(0XF8000004, 0x0000FFFFU ,0x0000767BU), - // .. FINISH: LOCK IT BACK - // FINISH: top - // - EMIT_EXIT(), - - // -}; - -unsigned long ps7_peripherals_init_data_1_0[] = { - // START: top - // .. START: SLCR SETTINGS - // .. UNLOCK_KEY = 0XDF0D - // .. ==> 0XF8000008[15:0] = 0x0000DF0DU - // .. ==> MASK : 0x0000FFFFU VAL : 0x0000DF0DU - // .. - EMIT_MASKWRITE(0XF8000008, 0x0000FFFFU ,0x0000DF0DU), - // .. FINISH: SLCR SETTINGS - // .. START: DDR TERM/IBUF_DISABLE_MODE SETTINGS - // .. IBUF_DISABLE_MODE = 0x1 - // .. ==> 0XF8000B48[7:7] = 0x00000001U - // .. ==> MASK : 0x00000080U VAL : 0x00000080U - // .. TERM_DISABLE_MODE = 0x1 - // .. ==> 0XF8000B48[8:8] = 0x00000001U - // .. ==> MASK : 0x00000100U VAL : 0x00000100U - // .. - EMIT_MASKWRITE(0XF8000B48, 0x00000180U ,0x00000180U), - // .. IBUF_DISABLE_MODE = 0x1 - // .. ==> 0XF8000B4C[7:7] = 0x00000001U - // .. ==> MASK : 0x00000080U VAL : 0x00000080U - // .. TERM_DISABLE_MODE = 0x1 - // .. ==> 0XF8000B4C[8:8] = 0x00000001U - // .. ==> MASK : 0x00000100U VAL : 0x00000100U - // .. - EMIT_MASKWRITE(0XF8000B4C, 0x00000180U ,0x00000180U), - // .. IBUF_DISABLE_MODE = 0x1 - // .. ==> 0XF8000B50[7:7] = 0x00000001U - // .. ==> MASK : 0x00000080U VAL : 0x00000080U - // .. TERM_DISABLE_MODE = 0x1 - // .. ==> 0XF8000B50[8:8] = 0x00000001U - // .. ==> MASK : 0x00000100U VAL : 0x00000100U - // .. - EMIT_MASKWRITE(0XF8000B50, 0x00000180U ,0x00000180U), - // .. IBUF_DISABLE_MODE = 0x1 - // .. ==> 0XF8000B54[7:7] = 0x00000001U - // .. ==> MASK : 0x00000080U VAL : 0x00000080U - // .. TERM_DISABLE_MODE = 0x1 - // .. ==> 0XF8000B54[8:8] = 0x00000001U - // .. ==> MASK : 0x00000100U VAL : 0x00000100U - // .. - EMIT_MASKWRITE(0XF8000B54, 0x00000180U ,0x00000180U), - // .. FINISH: DDR TERM/IBUF_DISABLE_MODE SETTINGS - // .. START: LOCK IT BACK - // .. LOCK_KEY = 0X767B - // .. ==> 0XF8000004[15:0] = 0x0000767BU - // .. ==> MASK : 0x0000FFFFU VAL : 0x0000767BU - // .. - EMIT_MASKWRITE(0XF8000004, 0x0000FFFFU ,0x0000767BU), - // .. FINISH: LOCK IT BACK - // .. START: SRAM/NOR SET OPMODE - // .. FINISH: SRAM/NOR SET OPMODE - // .. START: UART REGISTERS - // .. BDIV = 0x6 - // .. ==> 0XE0001034[7:0] = 0x00000006U - // .. ==> MASK : 0x000000FFU VAL : 0x00000006U - // .. - EMIT_MASKWRITE(0XE0001034, 0x000000FFU ,0x00000006U), - // .. CD = 0x3e - // .. ==> 0XE0001018[15:0] = 0x0000003EU - // .. ==> MASK : 0x0000FFFFU VAL : 0x0000003EU - // .. - EMIT_MASKWRITE(0XE0001018, 0x0000FFFFU ,0x0000003EU), - // .. STPBRK = 0x0 - // .. ==> 0XE0001000[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. STTBRK = 0x0 - // .. ==> 0XE0001000[7:7] = 0x00000000U - // .. ==> MASK : 0x00000080U VAL : 0x00000000U - // .. RSTTO = 0x0 - // .. ==> 0XE0001000[6:6] = 0x00000000U - // .. ==> MASK : 0x00000040U VAL : 0x00000000U - // .. TXDIS = 0x0 - // .. ==> 0XE0001000[5:5] = 0x00000000U - // .. ==> MASK : 0x00000020U VAL : 0x00000000U - // .. TXEN = 0x1 - // .. ==> 0XE0001000[4:4] = 0x00000001U - // .. ==> MASK : 0x00000010U VAL : 0x00000010U - // .. RXDIS = 0x0 - // .. ==> 0XE0001000[3:3] = 0x00000000U - // .. ==> MASK : 0x00000008U VAL : 0x00000000U - // .. RXEN = 0x1 - // .. ==> 0XE0001000[2:2] = 0x00000001U - // .. ==> MASK : 0x00000004U VAL : 0x00000004U - // .. TXRES = 0x1 - // .. ==> 0XE0001000[1:1] = 0x00000001U - // .. ==> MASK : 0x00000002U VAL : 0x00000002U - // .. RXRES = 0x1 - // .. ==> 0XE0001000[0:0] = 0x00000001U - // .. ==> MASK : 0x00000001U VAL : 0x00000001U - // .. - EMIT_MASKWRITE(0XE0001000, 0x000001FFU ,0x00000017U), - // .. IRMODE = 0x0 - // .. ==> 0XE0001004[11:11] = 0x00000000U - // .. ==> MASK : 0x00000800U VAL : 0x00000000U - // .. UCLKEN = 0x0 - // .. ==> 0XE0001004[10:10] = 0x00000000U - // .. ==> MASK : 0x00000400U VAL : 0x00000000U - // .. CHMODE = 0x0 - // .. ==> 0XE0001004[9:8] = 0x00000000U - // .. ==> MASK : 0x00000300U VAL : 0x00000000U - // .. NBSTOP = 0x0 - // .. ==> 0XE0001004[7:6] = 0x00000000U - // .. ==> MASK : 0x000000C0U VAL : 0x00000000U - // .. PAR = 0x4 - // .. ==> 0XE0001004[5:3] = 0x00000004U - // .. ==> MASK : 0x00000038U VAL : 0x00000020U - // .. CHRL = 0x0 - // .. ==> 0XE0001004[2:1] = 0x00000000U - // .. ==> MASK : 0x00000006U VAL : 0x00000000U - // .. CLKS = 0x0 - // .. ==> 0XE0001004[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XE0001004, 0x00000FFFU ,0x00000020U), - // .. FINISH: UART REGISTERS - // .. START: TPIU WIDTH IN CASE OF EMIO - // .. .. START: TRACE LOCK ACCESS REGISTER - // .. .. a = 0XC5ACCE55 - // .. .. ==> 0XF8803FB0[31:0] = 0xC5ACCE55U - // .. .. ==> MASK : 0xFFFFFFFFU VAL : 0xC5ACCE55U - // .. .. - EMIT_MASKWRITE(0XF8803FB0, 0xFFFFFFFFU ,0xC5ACCE55U), - // .. .. FINISH: TRACE LOCK ACCESS REGISTER - // .. .. START: TRACE CURRENT PORT SIZE - // .. .. a = 2 - // .. .. ==> 0XF8803004[31:0] = 0x00000002U - // .. .. ==> MASK : 0xFFFFFFFFU VAL : 0x00000002U - // .. .. - EMIT_MASKWRITE(0XF8803004, 0xFFFFFFFFU ,0x00000002U), - // .. .. FINISH: TRACE CURRENT PORT SIZE - // .. .. START: TRACE LOCK ACCESS REGISTER - // .. .. a = 0X0 - // .. .. ==> 0XF8803FB0[31:0] = 0x00000000U - // .. .. ==> MASK : 0xFFFFFFFFU VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8803FB0, 0xFFFFFFFFU ,0x00000000U), - // .. .. FINISH: TRACE LOCK ACCESS REGISTER - // .. FINISH: TPIU WIDTH IN CASE OF EMIO - // .. START: QSPI REGISTERS - // .. Holdb_dr = 1 - // .. ==> 0XE000D000[19:19] = 0x00000001U - // .. ==> MASK : 0x00080000U VAL : 0x00080000U - // .. - EMIT_MASKWRITE(0XE000D000, 0x00080000U ,0x00080000U), - // .. FINISH: QSPI REGISTERS - // .. START: PL POWER ON RESET REGISTERS - // .. PCFG_POR_CNT_4K = 0 - // .. ==> 0XF8007000[29:29] = 0x00000000U - // .. ==> MASK : 0x20000000U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8007000, 0x20000000U ,0x00000000U), - // .. FINISH: PL POWER ON RESET REGISTERS - // .. START: SMC TIMING CALCULATION REGISTER UPDATE - // .. .. START: NAND SET CYCLE - // .. .. FINISH: NAND SET CYCLE - // .. .. START: OPMODE - // .. .. FINISH: OPMODE - // .. .. START: DIRECT COMMAND - // .. .. FINISH: DIRECT COMMAND - // .. .. START: SRAM/NOR CS0 SET CYCLE - // .. .. FINISH: SRAM/NOR CS0 SET CYCLE - // .. .. START: DIRECT COMMAND - // .. .. FINISH: DIRECT COMMAND - // .. .. START: NOR CS0 BASE ADDRESS - // .. .. FINISH: NOR CS0 BASE ADDRESS - // .. .. START: SRAM/NOR CS1 SET CYCLE - // .. .. FINISH: SRAM/NOR CS1 SET CYCLE - // .. .. START: DIRECT COMMAND - // .. .. FINISH: DIRECT COMMAND - // .. .. START: NOR CS1 BASE ADDRESS - // .. .. FINISH: NOR CS1 BASE ADDRESS - // .. .. START: USB RESET - // .. .. .. START: USB0 RESET - // .. .. .. .. START: DIR MODE BANK 0 - // .. .. .. .. DIRECTION_0 = 0x80 - // .. .. .. .. ==> 0XE000A204[31:0] = 0x00000080U - // .. .. .. .. ==> MASK : 0xFFFFFFFFU VAL : 0x00000080U - // .. .. .. .. - EMIT_MASKWRITE(0XE000A204, 0xFFFFFFFFU ,0x00000080U), - // .. .. .. .. FINISH: DIR MODE BANK 0 - // .. .. .. .. START: DIR MODE BANK 1 - // .. .. .. .. FINISH: DIR MODE BANK 1 - // .. .. .. .. START: MASK_DATA_0_LSW HIGH BANK [15:0] - // .. .. .. .. MASK_0_LSW = 0xff7f - // .. .. .. .. ==> 0XE000A000[31:16] = 0x0000FF7FU - // .. .. .. .. ==> MASK : 0xFFFF0000U VAL : 0xFF7F0000U - // .. .. .. .. DATA_0_LSW = 0x80 - // .. .. .. .. ==> 0XE000A000[15:0] = 0x00000080U - // .. .. .. .. ==> MASK : 0x0000FFFFU VAL : 0x00000080U - // .. .. .. .. - EMIT_MASKWRITE(0XE000A000, 0xFFFFFFFFU ,0xFF7F0080U), - // .. .. .. .. FINISH: MASK_DATA_0_LSW HIGH BANK [15:0] - // .. .. .. .. START: MASK_DATA_0_MSW HIGH BANK [31:16] - // .. .. .. .. FINISH: MASK_DATA_0_MSW HIGH BANK [31:16] - // .. .. .. .. START: MASK_DATA_1_LSW HIGH BANK [47:32] - // .. .. .. .. FINISH: MASK_DATA_1_LSW HIGH BANK [47:32] - // .. .. .. .. START: MASK_DATA_1_MSW HIGH BANK [53:48] - // .. .. .. .. FINISH: MASK_DATA_1_MSW HIGH BANK [53:48] - // .. .. .. .. START: OUTPUT ENABLE BANK 0 - // .. .. .. .. OP_ENABLE_0 = 0x80 - // .. .. .. .. ==> 0XE000A208[31:0] = 0x00000080U - // .. .. .. .. ==> MASK : 0xFFFFFFFFU VAL : 0x00000080U - // .. .. .. .. - EMIT_MASKWRITE(0XE000A208, 0xFFFFFFFFU ,0x00000080U), - // .. .. .. .. FINISH: OUTPUT ENABLE BANK 0 - // .. .. .. .. START: OUTPUT ENABLE BANK 1 - // .. .. .. .. FINISH: OUTPUT ENABLE BANK 1 - // .. .. .. .. START: MASK_DATA_0_LSW LOW BANK [15:0] - // .. .. .. .. MASK_0_LSW = 0xff7f - // .. .. .. .. ==> 0XE000A000[31:16] = 0x0000FF7FU - // .. .. .. .. ==> MASK : 0xFFFF0000U VAL : 0xFF7F0000U - // .. .. .. .. DATA_0_LSW = 0x0 - // .. .. .. .. ==> 0XE000A000[15:0] = 0x00000000U - // .. .. .. .. ==> MASK : 0x0000FFFFU VAL : 0x00000000U - // .. .. .. .. - EMIT_MASKWRITE(0XE000A000, 0xFFFFFFFFU ,0xFF7F0000U), - // .. .. .. .. FINISH: MASK_DATA_0_LSW LOW BANK [15:0] - // .. .. .. .. START: MASK_DATA_0_MSW LOW BANK [31:16] - // .. .. .. .. FINISH: MASK_DATA_0_MSW LOW BANK [31:16] - // .. .. .. .. START: MASK_DATA_1_LSW LOW BANK [47:32] - // .. .. .. .. FINISH: MASK_DATA_1_LSW LOW BANK [47:32] - // .. .. .. .. START: MASK_DATA_1_MSW LOW BANK [53:48] - // .. .. .. .. FINISH: MASK_DATA_1_MSW LOW BANK [53:48] - // .. .. .. .. START: ADD 1 MS DELAY - // .. .. .. .. - EMIT_MASKDELAY(0XF8F00200, 1), - // .. .. .. .. FINISH: ADD 1 MS DELAY - // .. .. .. .. START: MASK_DATA_0_LSW HIGH BANK [15:0] - // .. .. .. .. MASK_0_LSW = 0xff7f - // .. .. .. .. ==> 0XE000A000[31:16] = 0x0000FF7FU - // .. .. .. .. ==> MASK : 0xFFFF0000U VAL : 0xFF7F0000U - // .. .. .. .. DATA_0_LSW = 0x80 - // .. .. .. .. ==> 0XE000A000[15:0] = 0x00000080U - // .. .. .. .. ==> MASK : 0x0000FFFFU VAL : 0x00000080U - // .. .. .. .. - EMIT_MASKWRITE(0XE000A000, 0xFFFFFFFFU ,0xFF7F0080U), - // .. .. .. .. FINISH: MASK_DATA_0_LSW HIGH BANK [15:0] - // .. .. .. .. START: MASK_DATA_0_MSW HIGH BANK [31:16] - // .. .. .. .. FINISH: MASK_DATA_0_MSW HIGH BANK [31:16] - // .. .. .. .. START: MASK_DATA_1_LSW HIGH BANK [47:32] - // .. .. .. .. FINISH: MASK_DATA_1_LSW HIGH BANK [47:32] - // .. .. .. .. START: MASK_DATA_1_MSW HIGH BANK [53:48] - // .. .. .. .. FINISH: MASK_DATA_1_MSW HIGH BANK [53:48] - // .. .. .. FINISH: USB0 RESET - // .. .. .. START: USB1 RESET - // .. .. .. .. START: DIR MODE BANK 0 - // .. .. .. .. FINISH: DIR MODE BANK 0 - // .. .. .. .. START: DIR MODE BANK 1 - // .. .. .. .. FINISH: DIR MODE BANK 1 - // .. .. .. .. START: MASK_DATA_0_LSW HIGH BANK [15:0] - // .. .. .. .. FINISH: MASK_DATA_0_LSW HIGH BANK [15:0] - // .. .. .. .. START: MASK_DATA_0_MSW HIGH BANK [31:16] - // .. .. .. .. FINISH: MASK_DATA_0_MSW HIGH BANK [31:16] - // .. .. .. .. START: MASK_DATA_1_LSW HIGH BANK [47:32] - // .. .. .. .. FINISH: MASK_DATA_1_LSW HIGH BANK [47:32] - // .. .. .. .. START: MASK_DATA_1_MSW HIGH BANK [53:48] - // .. .. .. .. FINISH: MASK_DATA_1_MSW HIGH BANK [53:48] - // .. .. .. .. START: OUTPUT ENABLE BANK 0 - // .. .. .. .. FINISH: OUTPUT ENABLE BANK 0 - // .. .. .. .. START: OUTPUT ENABLE BANK 1 - // .. .. .. .. FINISH: OUTPUT ENABLE BANK 1 - // .. .. .. .. START: MASK_DATA_0_LSW LOW BANK [15:0] - // .. .. .. .. FINISH: MASK_DATA_0_LSW LOW BANK [15:0] - // .. .. .. .. START: MASK_DATA_0_MSW LOW BANK [31:16] - // .. .. .. .. FINISH: MASK_DATA_0_MSW LOW BANK [31:16] - // .. .. .. .. START: MASK_DATA_1_LSW LOW BANK [47:32] - // .. .. .. .. FINISH: MASK_DATA_1_LSW LOW BANK [47:32] - // .. .. .. .. START: MASK_DATA_1_MSW LOW BANK [53:48] - // .. .. .. .. FINISH: MASK_DATA_1_MSW LOW BANK [53:48] - // .. .. .. .. START: ADD 1 MS DELAY - // .. .. .. .. - EMIT_MASKDELAY(0XF8F00200, 1), - // .. .. .. .. FINISH: ADD 1 MS DELAY - // .. .. .. .. START: MASK_DATA_0_LSW HIGH BANK [15:0] - // .. .. .. .. FINISH: MASK_DATA_0_LSW HIGH BANK [15:0] - // .. .. .. .. START: MASK_DATA_0_MSW HIGH BANK [31:16] - // .. .. .. .. FINISH: MASK_DATA_0_MSW HIGH BANK [31:16] - // .. .. .. .. START: MASK_DATA_1_LSW HIGH BANK [47:32] - // .. .. .. .. FINISH: MASK_DATA_1_LSW HIGH BANK [47:32] - // .. .. .. .. START: MASK_DATA_1_MSW HIGH BANK [53:48] - // .. .. .. .. FINISH: MASK_DATA_1_MSW HIGH BANK [53:48] - // .. .. .. FINISH: USB1 RESET - // .. .. FINISH: USB RESET - // .. .. START: ENET RESET - // .. .. .. START: ENET0 RESET - // .. .. .. .. START: DIR MODE BANK 0 - // .. .. .. .. FINISH: DIR MODE BANK 0 - // .. .. .. .. START: DIR MODE BANK 1 - // .. .. .. .. FINISH: DIR MODE BANK 1 - // .. .. .. .. START: MASK_DATA_0_LSW HIGH BANK [15:0] - // .. .. .. .. FINISH: MASK_DATA_0_LSW HIGH BANK [15:0] - // .. .. .. .. START: MASK_DATA_0_MSW HIGH BANK [31:16] - // .. .. .. .. FINISH: MASK_DATA_0_MSW HIGH BANK [31:16] - // .. .. .. .. START: MASK_DATA_1_LSW HIGH BANK [47:32] - // .. .. .. .. FINISH: MASK_DATA_1_LSW HIGH BANK [47:32] - // .. .. .. .. START: MASK_DATA_1_MSW HIGH BANK [53:48] - // .. .. .. .. FINISH: MASK_DATA_1_MSW HIGH BANK [53:48] - // .. .. .. .. START: OUTPUT ENABLE BANK 0 - // .. .. .. .. FINISH: OUTPUT ENABLE BANK 0 - // .. .. .. .. START: OUTPUT ENABLE BANK 1 - // .. .. .. .. FINISH: OUTPUT ENABLE BANK 1 - // .. .. .. .. START: MASK_DATA_0_LSW LOW BANK [15:0] - // .. .. .. .. FINISH: MASK_DATA_0_LSW LOW BANK [15:0] - // .. .. .. .. START: MASK_DATA_0_MSW LOW BANK [31:16] - // .. .. .. .. FINISH: MASK_DATA_0_MSW LOW BANK [31:16] - // .. .. .. .. START: MASK_DATA_1_LSW LOW BANK [47:32] - // .. .. .. .. FINISH: MASK_DATA_1_LSW LOW BANK [47:32] - // .. .. .. .. START: MASK_DATA_1_MSW LOW BANK [53:48] - // .. .. .. .. FINISH: MASK_DATA_1_MSW LOW BANK [53:48] - // .. .. .. .. START: ADD 1 MS DELAY - // .. .. .. .. - EMIT_MASKDELAY(0XF8F00200, 1), - // .. .. .. .. FINISH: ADD 1 MS DELAY - // .. .. .. .. START: MASK_DATA_0_LSW HIGH BANK [15:0] - // .. .. .. .. FINISH: MASK_DATA_0_LSW HIGH BANK [15:0] - // .. .. .. .. START: MASK_DATA_0_MSW HIGH BANK [31:16] - // .. .. .. .. FINISH: MASK_DATA_0_MSW HIGH BANK [31:16] - // .. .. .. .. START: MASK_DATA_1_LSW HIGH BANK [47:32] - // .. .. .. .. FINISH: MASK_DATA_1_LSW HIGH BANK [47:32] - // .. .. .. .. START: MASK_DATA_1_MSW HIGH BANK [53:48] - // .. .. .. .. FINISH: MASK_DATA_1_MSW HIGH BANK [53:48] - // .. .. .. FINISH: ENET0 RESET - // .. .. .. START: ENET1 RESET - // .. .. .. .. START: DIR MODE BANK 0 - // .. .. .. .. FINISH: DIR MODE BANK 0 - // .. .. .. .. START: DIR MODE BANK 1 - // .. .. .. .. FINISH: DIR MODE BANK 1 - // .. .. .. .. START: MASK_DATA_0_LSW HIGH BANK [15:0] - // .. .. .. .. FINISH: MASK_DATA_0_LSW HIGH BANK [15:0] - // .. .. .. .. START: MASK_DATA_0_MSW HIGH BANK [31:16] - // .. .. .. .. FINISH: MASK_DATA_0_MSW HIGH BANK [31:16] - // .. .. .. .. START: MASK_DATA_1_LSW HIGH BANK [47:32] - // .. .. .. .. FINISH: MASK_DATA_1_LSW HIGH BANK [47:32] - // .. .. .. .. START: MASK_DATA_1_MSW HIGH BANK [53:48] - // .. .. .. .. FINISH: MASK_DATA_1_MSW HIGH BANK [53:48] - // .. .. .. .. START: OUTPUT ENABLE BANK 0 - // .. .. .. .. FINISH: OUTPUT ENABLE BANK 0 - // .. .. .. .. START: OUTPUT ENABLE BANK 1 - // .. .. .. .. FINISH: OUTPUT ENABLE BANK 1 - // .. .. .. .. START: MASK_DATA_0_LSW LOW BANK [15:0] - // .. .. .. .. FINISH: MASK_DATA_0_LSW LOW BANK [15:0] - // .. .. .. .. START: MASK_DATA_0_MSW LOW BANK [31:16] - // .. .. .. .. FINISH: MASK_DATA_0_MSW LOW BANK [31:16] - // .. .. .. .. START: MASK_DATA_1_LSW LOW BANK [47:32] - // .. .. .. .. FINISH: MASK_DATA_1_LSW LOW BANK [47:32] - // .. .. .. .. START: MASK_DATA_1_MSW LOW BANK [53:48] - // .. .. .. .. FINISH: MASK_DATA_1_MSW LOW BANK [53:48] - // .. .. .. .. START: ADD 1 MS DELAY - // .. .. .. .. - EMIT_MASKDELAY(0XF8F00200, 1), - // .. .. .. .. FINISH: ADD 1 MS DELAY - // .. .. .. .. START: MASK_DATA_0_LSW HIGH BANK [15:0] - // .. .. .. .. FINISH: MASK_DATA_0_LSW HIGH BANK [15:0] - // .. .. .. .. START: MASK_DATA_0_MSW HIGH BANK [31:16] - // .. .. .. .. FINISH: MASK_DATA_0_MSW HIGH BANK [31:16] - // .. .. .. .. START: MASK_DATA_1_LSW HIGH BANK [47:32] - // .. .. .. .. FINISH: MASK_DATA_1_LSW HIGH BANK [47:32] - // .. .. .. .. START: MASK_DATA_1_MSW HIGH BANK [53:48] - // .. .. .. .. FINISH: MASK_DATA_1_MSW HIGH BANK [53:48] - // .. .. .. FINISH: ENET1 RESET - // .. .. FINISH: ENET RESET - // .. .. START: I2C RESET - // .. .. .. START: I2C0 RESET - // .. .. .. .. START: DIR MODE GPIO BANK0 - // .. .. .. .. FINISH: DIR MODE GPIO BANK0 - // .. .. .. .. START: DIR MODE GPIO BANK1 - // .. .. .. .. FINISH: DIR MODE GPIO BANK1 - // .. .. .. .. START: MASK_DATA_0_LSW HIGH BANK [15:0] - // .. .. .. .. FINISH: MASK_DATA_0_LSW HIGH BANK [15:0] - // .. .. .. .. START: MASK_DATA_0_MSW HIGH BANK [31:16] - // .. .. .. .. FINISH: MASK_DATA_0_MSW HIGH BANK [31:16] - // .. .. .. .. START: MASK_DATA_1_LSW HIGH BANK [47:32] - // .. .. .. .. FINISH: MASK_DATA_1_LSW HIGH BANK [47:32] - // .. .. .. .. START: MASK_DATA_1_MSW HIGH BANK [53:48] - // .. .. .. .. FINISH: MASK_DATA_1_MSW HIGH BANK [53:48] - // .. .. .. .. START: OUTPUT ENABLE - // .. .. .. .. FINISH: OUTPUT ENABLE - // .. .. .. .. START: OUTPUT ENABLE - // .. .. .. .. FINISH: OUTPUT ENABLE - // .. .. .. .. START: MASK_DATA_0_LSW LOW BANK [15:0] - // .. .. .. .. FINISH: MASK_DATA_0_LSW LOW BANK [15:0] - // .. .. .. .. START: MASK_DATA_0_MSW LOW BANK [31:16] - // .. .. .. .. FINISH: MASK_DATA_0_MSW LOW BANK [31:16] - // .. .. .. .. START: MASK_DATA_1_LSW LOW BANK [47:32] - // .. .. .. .. FINISH: MASK_DATA_1_LSW LOW BANK [47:32] - // .. .. .. .. START: MASK_DATA_1_MSW LOW BANK [53:48] - // .. .. .. .. FINISH: MASK_DATA_1_MSW LOW BANK [53:48] - // .. .. .. .. START: ADD 1 MS DELAY - // .. .. .. .. - EMIT_MASKDELAY(0XF8F00200, 1), - // .. .. .. .. FINISH: ADD 1 MS DELAY - // .. .. .. .. START: MASK_DATA_0_LSW HIGH BANK [15:0] - // .. .. .. .. FINISH: MASK_DATA_0_LSW HIGH BANK [15:0] - // .. .. .. .. START: MASK_DATA_0_MSW HIGH BANK [31:16] - // .. .. .. .. FINISH: MASK_DATA_0_MSW HIGH BANK [31:16] - // .. .. .. .. START: MASK_DATA_1_LSW HIGH BANK [47:32] - // .. .. .. .. FINISH: MASK_DATA_1_LSW HIGH BANK [47:32] - // .. .. .. .. START: MASK_DATA_1_MSW HIGH BANK [53:48] - // .. .. .. .. FINISH: MASK_DATA_1_MSW HIGH BANK [53:48] - // .. .. .. FINISH: I2C0 RESET - // .. .. .. START: I2C1 RESET - // .. .. .. .. START: DIR MODE GPIO BANK0 - // .. .. .. .. FINISH: DIR MODE GPIO BANK0 - // .. .. .. .. START: DIR MODE GPIO BANK1 - // .. .. .. .. FINISH: DIR MODE GPIO BANK1 - // .. .. .. .. START: MASK_DATA_0_LSW HIGH BANK [15:0] - // .. .. .. .. FINISH: MASK_DATA_0_LSW HIGH BANK [15:0] - // .. .. .. .. START: MASK_DATA_0_MSW HIGH BANK [31:16] - // .. .. .. .. FINISH: MASK_DATA_0_MSW HIGH BANK [31:16] - // .. .. .. .. START: MASK_DATA_1_LSW HIGH BANK [47:32] - // .. .. .. .. FINISH: MASK_DATA_1_LSW HIGH BANK [47:32] - // .. .. .. .. START: MASK_DATA_1_MSW HIGH BANK [53:48] - // .. .. .. .. FINISH: MASK_DATA_1_MSW HIGH BANK [53:48] - // .. .. .. .. START: OUTPUT ENABLE - // .. .. .. .. FINISH: OUTPUT ENABLE - // .. .. .. .. START: OUTPUT ENABLE - // .. .. .. .. FINISH: OUTPUT ENABLE - // .. .. .. .. START: MASK_DATA_0_LSW LOW BANK [15:0] - // .. .. .. .. FINISH: MASK_DATA_0_LSW LOW BANK [15:0] - // .. .. .. .. START: MASK_DATA_0_MSW LOW BANK [31:16] - // .. .. .. .. FINISH: MASK_DATA_0_MSW LOW BANK [31:16] - // .. .. .. .. START: MASK_DATA_1_LSW LOW BANK [47:32] - // .. .. .. .. FINISH: MASK_DATA_1_LSW LOW BANK [47:32] - // .. .. .. .. START: MASK_DATA_1_MSW LOW BANK [53:48] - // .. .. .. .. FINISH: MASK_DATA_1_MSW LOW BANK [53:48] - // .. .. .. .. START: ADD 1 MS DELAY - // .. .. .. .. - EMIT_MASKDELAY(0XF8F00200, 1), - // .. .. .. .. FINISH: ADD 1 MS DELAY - // .. .. .. .. START: MASK_DATA_0_LSW HIGH BANK [15:0] - // .. .. .. .. FINISH: MASK_DATA_0_LSW HIGH BANK [15:0] - // .. .. .. .. START: MASK_DATA_0_MSW HIGH BANK [31:16] - // .. .. .. .. FINISH: MASK_DATA_0_MSW HIGH BANK [31:16] - // .. .. .. .. START: MASK_DATA_1_LSW HIGH BANK [47:32] - // .. .. .. .. FINISH: MASK_DATA_1_LSW HIGH BANK [47:32] - // .. .. .. .. START: MASK_DATA_1_MSW HIGH BANK [53:48] - // .. .. .. .. FINISH: MASK_DATA_1_MSW HIGH BANK [53:48] - // .. .. .. FINISH: I2C1 RESET - // .. .. FINISH: I2C RESET - // .. .. START: NOR CHIP SELECT - // .. .. .. START: DIR MODE BANK 0 - // .. .. .. FINISH: DIR MODE BANK 0 - // .. .. .. START: MASK_DATA_0_LSW HIGH BANK [15:0] - // .. .. .. FINISH: MASK_DATA_0_LSW HIGH BANK [15:0] - // .. .. .. START: OUTPUT ENABLE BANK 0 - // .. .. .. FINISH: OUTPUT ENABLE BANK 0 - // .. .. FINISH: NOR CHIP SELECT - // .. FINISH: SMC TIMING CALCULATION REGISTER UPDATE - // FINISH: top - // - EMIT_EXIT(), - - // -}; - -unsigned long ps7_post_config_1_0[] = { - // START: top - // .. START: SLCR SETTINGS - // .. UNLOCK_KEY = 0XDF0D - // .. ==> 0XF8000008[15:0] = 0x0000DF0DU - // .. ==> MASK : 0x0000FFFFU VAL : 0x0000DF0DU - // .. - EMIT_MASKWRITE(0XF8000008, 0x0000FFFFU ,0x0000DF0DU), - // .. FINISH: SLCR SETTINGS - // .. START: ENABLING LEVEL SHIFTER - // .. USER_INP_ICT_EN_0 = 3 - // .. ==> 0XF8000900[1:0] = 0x00000003U - // .. ==> MASK : 0x00000003U VAL : 0x00000003U - // .. USER_INP_ICT_EN_1 = 3 - // .. ==> 0XF8000900[3:2] = 0x00000003U - // .. ==> MASK : 0x0000000CU VAL : 0x0000000CU - // .. - EMIT_MASKWRITE(0XF8000900, 0x0000000FU ,0x0000000FU), - // .. FINISH: ENABLING LEVEL SHIFTER - // .. START: TPIU WIDTH IN CASE OF EMIO - // .. .. START: TRACE LOCK ACCESS REGISTER - // .. .. a = 0XC5ACCE55 - // .. .. ==> 0XF8803FB0[31:0] = 0xC5ACCE55U - // .. .. ==> MASK : 0xFFFFFFFFU VAL : 0xC5ACCE55U - // .. .. - EMIT_MASKWRITE(0XF8803FB0, 0xFFFFFFFFU ,0xC5ACCE55U), - // .. .. FINISH: TRACE LOCK ACCESS REGISTER - // .. .. START: TRACE CURRENT PORT SIZE - // .. .. a = 2 - // .. .. ==> 0XF8803004[31:0] = 0x00000002U - // .. .. ==> MASK : 0xFFFFFFFFU VAL : 0x00000002U - // .. .. - EMIT_MASKWRITE(0XF8803004, 0xFFFFFFFFU ,0x00000002U), - // .. .. FINISH: TRACE CURRENT PORT SIZE - // .. .. START: TRACE LOCK ACCESS REGISTER - // .. .. a = 0X0 - // .. .. ==> 0XF8803FB0[31:0] = 0x00000000U - // .. .. ==> MASK : 0xFFFFFFFFU VAL : 0x00000000U - // .. .. - EMIT_MASKWRITE(0XF8803FB0, 0xFFFFFFFFU ,0x00000000U), - // .. .. FINISH: TRACE LOCK ACCESS REGISTER - // .. FINISH: TPIU WIDTH IN CASE OF EMIO - // .. START: FPGA RESETS TO 0 - // .. reserved_3 = 0 - // .. ==> 0XF8000240[31:25] = 0x00000000U - // .. ==> MASK : 0xFE000000U VAL : 0x00000000U - // .. FPGA_ACP_RST = 0 - // .. ==> 0XF8000240[24:24] = 0x00000000U - // .. ==> MASK : 0x01000000U VAL : 0x00000000U - // .. FPGA_AXDS3_RST = 0 - // .. ==> 0XF8000240[23:23] = 0x00000000U - // .. ==> MASK : 0x00800000U VAL : 0x00000000U - // .. FPGA_AXDS2_RST = 0 - // .. ==> 0XF8000240[22:22] = 0x00000000U - // .. ==> MASK : 0x00400000U VAL : 0x00000000U - // .. FPGA_AXDS1_RST = 0 - // .. ==> 0XF8000240[21:21] = 0x00000000U - // .. ==> MASK : 0x00200000U VAL : 0x00000000U - // .. FPGA_AXDS0_RST = 0 - // .. ==> 0XF8000240[20:20] = 0x00000000U - // .. ==> MASK : 0x00100000U VAL : 0x00000000U - // .. reserved_2 = 0 - // .. ==> 0XF8000240[19:18] = 0x00000000U - // .. ==> MASK : 0x000C0000U VAL : 0x00000000U - // .. FSSW1_FPGA_RST = 0 - // .. ==> 0XF8000240[17:17] = 0x00000000U - // .. ==> MASK : 0x00020000U VAL : 0x00000000U - // .. FSSW0_FPGA_RST = 0 - // .. ==> 0XF8000240[16:16] = 0x00000000U - // .. ==> MASK : 0x00010000U VAL : 0x00000000U - // .. reserved_1 = 0 - // .. ==> 0XF8000240[15:14] = 0x00000000U - // .. ==> MASK : 0x0000C000U VAL : 0x00000000U - // .. FPGA_FMSW1_RST = 0 - // .. ==> 0XF8000240[13:13] = 0x00000000U - // .. ==> MASK : 0x00002000U VAL : 0x00000000U - // .. FPGA_FMSW0_RST = 0 - // .. ==> 0XF8000240[12:12] = 0x00000000U - // .. ==> MASK : 0x00001000U VAL : 0x00000000U - // .. FPGA_DMA3_RST = 0 - // .. ==> 0XF8000240[11:11] = 0x00000000U - // .. ==> MASK : 0x00000800U VAL : 0x00000000U - // .. FPGA_DMA2_RST = 0 - // .. ==> 0XF8000240[10:10] = 0x00000000U - // .. ==> MASK : 0x00000400U VAL : 0x00000000U - // .. FPGA_DMA1_RST = 0 - // .. ==> 0XF8000240[9:9] = 0x00000000U - // .. ==> MASK : 0x00000200U VAL : 0x00000000U - // .. FPGA_DMA0_RST = 0 - // .. ==> 0XF8000240[8:8] = 0x00000000U - // .. ==> MASK : 0x00000100U VAL : 0x00000000U - // .. reserved = 0 - // .. ==> 0XF8000240[7:4] = 0x00000000U - // .. ==> MASK : 0x000000F0U VAL : 0x00000000U - // .. FPGA3_OUT_RST = 0 - // .. ==> 0XF8000240[3:3] = 0x00000000U - // .. ==> MASK : 0x00000008U VAL : 0x00000000U - // .. FPGA2_OUT_RST = 0 - // .. ==> 0XF8000240[2:2] = 0x00000000U - // .. ==> MASK : 0x00000004U VAL : 0x00000000U - // .. FPGA1_OUT_RST = 0 - // .. ==> 0XF8000240[1:1] = 0x00000000U - // .. ==> MASK : 0x00000002U VAL : 0x00000000U - // .. FPGA0_OUT_RST = 0 - // .. ==> 0XF8000240[0:0] = 0x00000000U - // .. ==> MASK : 0x00000001U VAL : 0x00000000U - // .. - EMIT_MASKWRITE(0XF8000240, 0xFFFFFFFFU ,0x00000000U), - // .. FINISH: FPGA RESETS TO 0 - // .. START: AFI REGISTERS - // .. .. START: AFI0 REGISTERS - // .. .. FINISH: AFI0 REGISTERS - // .. .. START: AFI1 REGISTERS - // .. .. FINISH: AFI1 REGISTERS - // .. .. START: AFI2 REGISTERS - // .. .. FINISH: AFI2 REGISTERS - // .. .. START: AFI3 REGISTERS - // .. .. FINISH: AFI3 REGISTERS - // .. FINISH: AFI REGISTERS - // .. START: LOCK IT BACK - // .. LOCK_KEY = 0X767B - // .. ==> 0XF8000004[15:0] = 0x0000767BU - // .. ==> MASK : 0x0000FFFFU VAL : 0x0000767BU - // .. - EMIT_MASKWRITE(0XF8000004, 0x0000FFFFU ,0x0000767BU), - // .. FINISH: LOCK IT BACK - // FINISH: top - // - EMIT_EXIT(), - - // -}; - -unsigned long ps7_debug_1_0[] = { - // START: top - // .. START: CROSS TRIGGER CONFIGURATIONS - // .. .. START: UNLOCKING CTI REGISTERS - // .. .. KEY = 0XC5ACCE55 - // .. .. ==> 0XF8898FB0[31:0] = 0xC5ACCE55U - // .. .. ==> MASK : 0xFFFFFFFFU VAL : 0xC5ACCE55U - // .. .. - EMIT_MASKWRITE(0XF8898FB0, 0xFFFFFFFFU ,0xC5ACCE55U), - // .. .. KEY = 0XC5ACCE55 - // .. .. ==> 0XF8899FB0[31:0] = 0xC5ACCE55U - // .. .. ==> MASK : 0xFFFFFFFFU VAL : 0xC5ACCE55U - // .. .. - EMIT_MASKWRITE(0XF8899FB0, 0xFFFFFFFFU ,0xC5ACCE55U), - // .. .. KEY = 0XC5ACCE55 - // .. .. ==> 0XF8809FB0[31:0] = 0xC5ACCE55U - // .. .. ==> MASK : 0xFFFFFFFFU VAL : 0xC5ACCE55U - // .. .. - EMIT_MASKWRITE(0XF8809FB0, 0xFFFFFFFFU ,0xC5ACCE55U), - // .. .. FINISH: UNLOCKING CTI REGISTERS - // .. .. START: ENABLING CTI MODULES AND CHANNELS - // .. .. FINISH: ENABLING CTI MODULES AND CHANNELS - // .. .. START: MAPPING CPU0, CPU1 AND FTM EVENTS TO CTM CHANNELS - // .. .. FINISH: MAPPING CPU0, CPU1 AND FTM EVENTS TO CTM CHANNELS - // .. FINISH: CROSS TRIGGER CONFIGURATIONS - // FINISH: top - // - EMIT_EXIT(), - - // -}; - - -#include "xil_io.h" -#define PS7_MASK_POLL_TIME 100000000 - -char* -getPS7MessageInfo(unsigned key) { - - char* err_msg = ""; - switch (key) { - case PS7_INIT_SUCCESS: err_msg = "PS7 initialization successful"; break; - case PS7_INIT_CORRUPT: err_msg = "PS7 init Data Corrupted"; break; - case PS7_INIT_TIMEOUT: err_msg = "PS7 init mask poll timeout"; break; - case PS7_POLL_FAILED_DDR_INIT: err_msg = "Mask Poll failed for DDR Init"; break; - case PS7_POLL_FAILED_DMA: err_msg = "Mask Poll failed for PLL Init"; break; - case PS7_POLL_FAILED_PLL: err_msg = "Mask Poll failed for DMA done bit"; break; - default: err_msg = "Undefined error status"; break; - } - - return err_msg; -} - -unsigned long -ps7GetSiliconVersion () { - // Read PS version from MCTRL register [31:28] - unsigned long mask = 0xF0000000; - unsigned long *addr = (unsigned long*) 0XF8007080; - unsigned long ps_version = (*addr & mask) >> 28; - return ps_version; -} - -void mask_write (unsigned long add , unsigned long mask, unsigned long val ) { - unsigned long *addr = (unsigned long*) add; - *addr = ( val & mask ) | ( *addr & ~mask); - //xil_printf("MaskWrite : 0x%x--> 0x%x \n \r" ,add, *addr); -} - - -int mask_poll(unsigned long add , unsigned long mask ) { - volatile unsigned long *addr = (volatile unsigned long*) add; - int i = 0; - while (!(*addr & mask)) { - if (i == PS7_MASK_POLL_TIME) { - return -1; - } - i++; - } - return 1; - //xil_printf("MaskPoll : 0x%x --> 0x%x \n \r" , add, *addr); -} - -unsigned long mask_read(unsigned long add , unsigned long mask ) { - unsigned long *addr = (unsigned long*) add; - unsigned long val = (*addr & mask); - //xil_printf("MaskRead : 0x%x --> 0x%x \n \r" , add, val); - return val; -} - - - -int -ps7_config(unsigned long * ps7_config_init) -{ - unsigned long *ptr = ps7_config_init; - - unsigned long opcode; // current instruction .. - unsigned long args[16]; // no opcode has so many args ... - int numargs; // number of arguments of this instruction - int j; // general purpose index - - volatile unsigned long *addr; // some variable to make code readable - unsigned long val,mask; // some variable to make code readable - - int finish = -1 ; // loop while this is negative ! - int i = 0; // Timeout variable - - while( finish < 0 ) { - numargs = ptr[0] & 0xF; - opcode = ptr[0] >> 4; - - for( j = 0 ; j < numargs ; j ++ ) - args[j] = ptr[j+1]; - ptr += numargs + 1; - - - switch ( opcode ) { - - case OPCODE_EXIT: - finish = PS7_INIT_SUCCESS; - break; - - case OPCODE_CLEAR: - addr = (unsigned long*) args[0]; - *addr = 0; - break; - - case OPCODE_WRITE: - addr = (unsigned long*) args[0]; - val = args[1]; - *addr = val; - break; - - case OPCODE_MASKWRITE: - addr = (unsigned long*) args[0]; - mask = args[1]; - val = args[2]; - *addr = ( val & mask ) | ( *addr & ~mask); - break; - - case OPCODE_MASKPOLL: - addr = (unsigned long*) args[0]; - mask = args[1]; - i = 0; - while (!(*addr & mask)) { - if (i == PS7_MASK_POLL_TIME) { - finish = PS7_INIT_TIMEOUT; - break; - } - i++; - } - break; - case OPCODE_MASKDELAY: - addr = (unsigned long*) args[0]; - mask = args[1]; - int delay = get_number_of_cycles_for_delay(mask); - perf_reset_and_start_timer(); - while ((*addr < delay)) { - } - break; - default: - finish = PS7_INIT_CORRUPT; - break; - } - } - return finish; -} - -unsigned long *ps7_mio_init_data = ps7_mio_init_data_3_0; -unsigned long *ps7_pll_init_data = ps7_pll_init_data_3_0; -unsigned long *ps7_clock_init_data = ps7_clock_init_data_3_0; -unsigned long *ps7_ddr_init_data = ps7_ddr_init_data_3_0; -unsigned long *ps7_peripherals_init_data = ps7_peripherals_init_data_3_0; - -int -ps7_post_config() -{ - // Get the PS_VERSION on run time - unsigned long si_ver = ps7GetSiliconVersion (); - int ret = -1; - if (si_ver == PCW_SILICON_VERSION_1) { - ret = ps7_config (ps7_post_config_1_0); - if (ret != PS7_INIT_SUCCESS) return ret; - } else if (si_ver == PCW_SILICON_VERSION_2) { - ret = ps7_config (ps7_post_config_2_0); - if (ret != PS7_INIT_SUCCESS) return ret; - } else { - ret = ps7_config (ps7_post_config_3_0); - if (ret != PS7_INIT_SUCCESS) return ret; - } - return PS7_INIT_SUCCESS; -} - -int -ps7_debug() -{ - // Get the PS_VERSION on run time - unsigned long si_ver = ps7GetSiliconVersion (); - int ret = -1; - if (si_ver == PCW_SILICON_VERSION_1) { - ret = ps7_config (ps7_debug_1_0); - if (ret != PS7_INIT_SUCCESS) return ret; - } else if (si_ver == PCW_SILICON_VERSION_2) { - ret = ps7_config (ps7_debug_2_0); - if (ret != PS7_INIT_SUCCESS) return ret; - } else { - ret = ps7_config (ps7_debug_3_0); - if (ret != PS7_INIT_SUCCESS) return ret; - } - return PS7_INIT_SUCCESS; -} - -int -ps7_init() -{ - // Get the PS_VERSION on run time - unsigned long si_ver = ps7GetSiliconVersion (); - int ret; - //int pcw_ver = 0; - - if (si_ver == PCW_SILICON_VERSION_1) { - ps7_mio_init_data = ps7_mio_init_data_1_0; - ps7_pll_init_data = ps7_pll_init_data_1_0; - ps7_clock_init_data = ps7_clock_init_data_1_0; - ps7_ddr_init_data = ps7_ddr_init_data_1_0; - ps7_peripherals_init_data = ps7_peripherals_init_data_1_0; - //pcw_ver = 1; - - } else if (si_ver == PCW_SILICON_VERSION_2) { - ps7_mio_init_data = ps7_mio_init_data_2_0; - ps7_pll_init_data = ps7_pll_init_data_2_0; - ps7_clock_init_data = ps7_clock_init_data_2_0; - ps7_ddr_init_data = ps7_ddr_init_data_2_0; - ps7_peripherals_init_data = ps7_peripherals_init_data_2_0; - //pcw_ver = 2; - - } else { - ps7_mio_init_data = ps7_mio_init_data_3_0; - ps7_pll_init_data = ps7_pll_init_data_3_0; - ps7_clock_init_data = ps7_clock_init_data_3_0; - ps7_ddr_init_data = ps7_ddr_init_data_3_0; - ps7_peripherals_init_data = ps7_peripherals_init_data_3_0; - //pcw_ver = 3; - } - - // MIO init - ret = ps7_config (ps7_mio_init_data); - if (ret != PS7_INIT_SUCCESS) return ret; - - // PLL init - ret = ps7_config (ps7_pll_init_data); - if (ret != PS7_INIT_SUCCESS) return ret; - - // Clock init - ret = ps7_config (ps7_clock_init_data); - if (ret != PS7_INIT_SUCCESS) return ret; - - // DDR init - ret = ps7_config (ps7_ddr_init_data); - if (ret != PS7_INIT_SUCCESS) return ret; - - - - // Peripherals init - ret = ps7_config (ps7_peripherals_init_data); - if (ret != PS7_INIT_SUCCESS) return ret; - //xil_printf ("\n PCW Silicon Version : %d.0", pcw_ver); - return PS7_INIT_SUCCESS; -} - - - - -/* For delay calculation using global timer */ - -/* start timer */ - void perf_start_clock(void) -{ - *(volatile unsigned int*)SCU_GLOBAL_TIMER_CONTROL = ((1 << 0) | // Timer Enable - (1 << 3) | // Auto-increment - (0 << 8) // Pre-scale - ); -} - -/* stop timer and reset timer count regs */ - void perf_reset_clock(void) -{ - perf_disable_clock(); - *(volatile unsigned int*)SCU_GLOBAL_TIMER_COUNT_L32 = 0; - *(volatile unsigned int*)SCU_GLOBAL_TIMER_COUNT_U32 = 0; -} - -/* Compute mask for given delay in miliseconds*/ -int get_number_of_cycles_for_delay(unsigned int delay) -{ - // GTC is always clocked at 1/2 of the CPU frequency (CPU_3x2x) - return (APU_FREQ*delay/(2*1000)); - -} - -/* stop timer */ - void perf_disable_clock(void) -{ - *(volatile unsigned int*)SCU_GLOBAL_TIMER_CONTROL = 0; -} - -void perf_reset_and_start_timer() -{ - perf_reset_clock(); - perf_start_clock(); -} - - - - diff --git a/meta-xilinx-bsp/recipes-bsp/platform-init/platform-init/picozed-zynq7/ps7_init_gpl.h b/meta-xilinx-bsp/recipes-bsp/platform-init/platform-init/picozed-zynq7/ps7_init_gpl.h deleted file mode 100644 index df5205e8..00000000 --- a/meta-xilinx-bsp/recipes-bsp/platform-init/platform-init/picozed-zynq7/ps7_init_gpl.h +++ /dev/null @@ -1,130 +0,0 @@ - -/****************************************************************************** -* -* (c) Copyright 2010-2014 Xilinx, Inc. All rights reserved. -* -* This program is free software; you can redistribute it and/or modify -* it under the terms of the GNU General Public License as published by -* the Free Software Foundation; either version 2 of the License, or -* (at your option) any later version. -* -* This program is distributed in the hope that it will be useful, -* but WITHOUT ANY WARRANTY; without even the implied warranty of -* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -* GNU General Public License for more details. -* -* You should have received a copy of the GNU General Public License along -* with this program; if not, see <http://www.gnu.org/licenses/> -* -* -*******************************************************************************/ -/****************************************************************************/ -/** -* -* @file ps7_init.h -* -* This file can be included in FSBL code -* to get prototype of ps7_init() function -* and error codes -* -*****************************************************************************/ - -#ifdef __cplusplus -extern "C" { -#endif - - -//typedef unsigned int u32; - - -/** do we need to make this name more unique ? **/ -//extern u32 ps7_init_data[]; -extern unsigned long * ps7_ddr_init_data; -extern unsigned long * ps7_mio_init_data; -extern unsigned long * ps7_pll_init_data; -extern unsigned long * ps7_clock_init_data; -extern unsigned long * ps7_peripherals_init_data; - - - -#define OPCODE_EXIT 0U -#define OPCODE_CLEAR 1U -#define OPCODE_WRITE 2U -#define OPCODE_MASKWRITE 3U -#define OPCODE_MASKPOLL 4U -#define OPCODE_MASKDELAY 5U -#define NEW_PS7_ERR_CODE 1 - -/* Encode number of arguments in last nibble */ -#define EMIT_EXIT() ( (OPCODE_EXIT << 4 ) | 0 ) -#define EMIT_CLEAR(addr) ( (OPCODE_CLEAR << 4 ) | 1 ) , addr -#define EMIT_WRITE(addr,val) ( (OPCODE_WRITE << 4 ) | 2 ) , addr, val -#define EMIT_MASKWRITE(addr,mask,val) ( (OPCODE_MASKWRITE << 4 ) | 3 ) , addr, mask, val -#define EMIT_MASKPOLL(addr,mask) ( (OPCODE_MASKPOLL << 4 ) | 2 ) , addr, mask -#define EMIT_MASKDELAY(addr,mask) ( (OPCODE_MASKDELAY << 4 ) | 2 ) , addr, mask - -/* Returns codes of PS7_Init */ -#define PS7_INIT_SUCCESS (0) // 0 is success in good old C -#define PS7_INIT_CORRUPT (1) // 1 the data is corrupted, and slcr reg are in corrupted state now -#define PS7_INIT_TIMEOUT (2) // 2 when a poll operation timed out -#define PS7_POLL_FAILED_DDR_INIT (3) // 3 when a poll operation timed out for ddr init -#define PS7_POLL_FAILED_DMA (4) // 4 when a poll operation timed out for dma done bit -#define PS7_POLL_FAILED_PLL (5) // 5 when a poll operation timed out for pll sequence init - - -/* Silicon Versions */ -#define PCW_SILICON_VERSION_1 0 -#define PCW_SILICON_VERSION_2 1 -#define PCW_SILICON_VERSION_3 2 - -/* This flag to be used by FSBL to check whether ps7_post_config() proc exixts */ -#define PS7_POST_CONFIG - -/* Freq of all peripherals */ - -#define APU_FREQ 666666687 -#define DDR_FREQ 533333374 -#define DCI_FREQ 10158731 -#define QSPI_FREQ 200000000 -#define SMC_FREQ 10000000 -#define ENET0_FREQ 125000000 -#define ENET1_FREQ 10000000 -#define USB0_FREQ 60000000 -#define USB1_FREQ 60000000 -#define SDIO_FREQ 50000000 -#define UART_FREQ 50000000 -#define SPI_FREQ 10000000 -#define I2C_FREQ 111111115 -#define WDT_FREQ 111111115 -#define TTC_FREQ 50000000 -#define CAN_FREQ 10000000 -#define PCAP_FREQ 200000000 -#define TPIU_FREQ 200000000 -#define FPGA0_FREQ 100000000 -#define FPGA1_FREQ 100000000 -#define FPGA2_FREQ 33333336 -#define FPGA3_FREQ 50000000 - - -/* For delay calculation using global registers*/ -#define SCU_GLOBAL_TIMER_COUNT_L32 0xF8F00200 -#define SCU_GLOBAL_TIMER_COUNT_U32 0xF8F00204 -#define SCU_GLOBAL_TIMER_CONTROL 0xF8F00208 -#define SCU_GLOBAL_TIMER_AUTO_INC 0xF8F00218 - -int ps7_config( unsigned long*); -int ps7_init(); -int ps7_post_config(); -int ps7_debug(); -char* getPS7MessageInfo(unsigned key); - -void perf_start_clock(void); -void perf_disable_clock(void); -void perf_reset_clock(void); -void perf_reset_and_start_timer(); -int get_number_of_cycles_for_delay(unsigned int delay); -#ifdef __cplusplus -} -#endif - - diff --git a/meta-xilinx-bsp/recipes-bsp/pmu-firmware/pmu-rom_2018.1.bb b/meta-xilinx-bsp/recipes-bsp/pmu-firmware/pmu-rom_2018.1.bb deleted file mode 100644 index 195c6309..00000000 --- a/meta-xilinx-bsp/recipes-bsp/pmu-firmware/pmu-rom_2018.1.bb +++ /dev/null @@ -1,41 +0,0 @@ -SUMMARY = "PMU ROM for QEMU" -DESCRIPTION = "The ZynqMP PMU ROM for QEMU emulation" -HOMEPAGE = "http://www.xilinx.com" -SECTION = "bsp" - -# The BSP package does not include any license information. -LICENSE = "Proprietary" -LICENSE_FLAGS = "xilinx" -LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/Proprietary;md5=0557f9d92cf58f2ccdd50f62f8ac0b28" - -COMPATIBLE_MACHINE = "zcu102-zynqmp" - -inherit deploy -inherit xilinx-fetch-restricted - -BSP_NAME = "xilinx-zcu102" -BSP_FILE = "${BSP_NAME}-v${PV}-final.bsp" -SRC_URI = "https://www.xilinx.com/member/forms/download/xef.html?filename=${BSP_FILE};downloadfilename=${BSP_FILE}" -SRC_URI[md5sum] = "cea5f11761e7f38cbfcf0a07a19094e0" -SRC_URI[sha256sum] = "7ac0ac3a5fb7dd162c0a922c66edb33b5737955ef6570a1a1d3b15b4344f7cc1" - -INHIBIT_DEFAULT_DEPS = "1" -PACKAGE_ARCH = "${MACHINE_ARCH}" - -do_compile() { - # Extract the rom into workdir - tar -xf ${WORKDIR}/${BSP_FILE} ${BSP_NAME}-${PV}/pre-built/linux/images/pmu_rom_qemu_sha3.elf -C ${S} - # tar preserves the tree, so use find to get the full path and move to to the root - for i in $(find ${S} -type f -name *.elf); do mv $i ${S}/pmu-rom.elf; done -} - -do_install() { - : -} - -do_deploy () { - install -D ${S}/pmu-rom.elf ${DEPLOYDIR}/pmu-rom.elf -} - -addtask deploy before do_build after do_install - diff --git a/meta-xilinx-bsp/recipes-bsp/reference-design/kc705-bitstream_2019.1.bb b/meta-xilinx-bsp/recipes-bsp/reference-design/kc705-bitstream_2019.1.bb deleted file mode 100644 index 6a2ca7cc..00000000 --- a/meta-xilinx-bsp/recipes-bsp/reference-design/kc705-bitstream_2019.1.bb +++ /dev/null @@ -1,48 +0,0 @@ -SUMMARY = "KC705 Pre-built Bitstream" -DESCRIPTION = "A Pre-built bitstream for the KC705, which is capable of booting a Linux system." -HOMEPAGE = "http://www.xilinx.com" -SECTION = "bsp" - -# The BSP package does not include any license information. -LICENSE = "Proprietary" -LICENSE_FLAGS = "xilinx" -LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/Proprietary;md5=0557f9d92cf58f2ccdd50f62f8ac0b28" - -COMPATIBLE_MACHINE = "kc705-microblazeel" - -inherit deploy -inherit xilinx-fetch-restricted - -BSP_NAME = "xilinx-kc705" -BSP_FILE = "${BSP_NAME}-v${PV}-final.bsp" -SRC_URI = "https://www.xilinx.com/member/forms/download/xef.html?filename=${BSP_FILE};downloadfilename=${BSP_FILE}" -SRC_URI[md5sum] = "5c0365a8a26cc27b4419aa1d7dd82351" -SRC_URI[sha256sum] = "a909a91a37a9925ee2f972ccb10f986a26ff9785c1a71a483545a192783bf773" - -PROVIDES = "virtual/bitstream" - -FILES_${PN} += "/boot/download.bit" - -INHIBIT_DEFAULT_DEPS = "1" -PACKAGE_ARCH = "${MACHINE_ARCH}" - -# deps needed to extract content from the .bsp file -DEPENDS += "tar-native gzip-native" - -do_compile() { - # Extract the bitstream into workdir - tar -xf ${WORKDIR}/${BSP_FILE} ${BSP_NAME}-axi-full-${PV}/pre-built/linux/images/download.bit -C ${S} - # move the bit file to ${S}/ as it is in a subdir in the tar file - for i in $(find -type f -name download.bit); do mv $i ${S}; done -} - -do_install() { - install -D ${S}/download.bit ${D}/boot/download.bit -} - -do_deploy () { - install -D ${S}/download.bit ${DEPLOYDIR}/download.bit -} - -addtask deploy before do_build after do_install - diff --git a/meta-xilinx-bsp/recipes-bsp/u-boot/files/kc705-microblazeel.cfg b/meta-xilinx-bsp/recipes-bsp/u-boot/files/kc705-microblazeel.cfg new file mode 100644 index 00000000..8fb38950 --- /dev/null +++ b/meta-xilinx-bsp/recipes-bsp/u-boot/files/kc705-microblazeel.cfg @@ -0,0 +1,39 @@ +# SPDX-License-Identifier: MIT + +#........................................................................ +# WARNING +# +# This file is a u-boot configuration fragment, and not a full u-boot +# configuration file. The final u-boot configuration is made up of +# an assembly of processed fragments, each of which is designed to +# capture a specific part of the final configuration (e.g. platform +# configuration, feature configuration, and board specific hardware +# configuration). For more information on u-boot configuration, please +# refer the product documentation. +# +#....................................................................... + +# +# Definitions for KC705 evaluation board +# +CONFIG_SYS_FLASH_PROTECTION=y +CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y +CONFIG_SYS_FLASH_CFI=y +CONFIG_FLASH_CFI_DRIVER=y +CONFIG_CMD_FLASH=y +CONFIG_CMD_IMLS=y +CONFIG_MTD_NOR_FLASH=y +CONFIG_MTD_DEVICE=y +# CONFIG_CMD_SPI is not set +# CONFIG_CMD_SF is not set +# CONFIG_SPI_FLASH is not set +# CONFIG_SPI_FLASH_BAR is not set +# CONFIG_DM_SPI_FLASH is not set +# CONFIG_DM_SPI is not set +# CONFIG_SPI_FLASH_SPANSION is not set +# CONFIG_SPI_FLASH_STMICRO is not set +# CONFIG_SPI_FLASH_WINBOND is not set +# CONFIG_SPI_FLASH_MACRONIX is not set +# CONFIG_SPI is not set +# CONFIG_SPI_FLASH_ISSI is not set +# CONFIG_XILINX_SPI is not set
\ No newline at end of file diff --git a/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-spl-zynq-init.inc b/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-spl-zynq-init.inc deleted file mode 100644 index cf8b9b7c..00000000 --- a/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-spl-zynq-init.inc +++ /dev/null @@ -1,72 +0,0 @@ -inherit xilinx-platform-init - -FORCE_PLATFORM_INIT[doc] = "This variable is used to force the overriding of all platform init files in u-boot source." - -PLATFORM_BOARD_DIR ?= "" -PLATFORM_BOARD_DIR_zynq = "board/xilinx/zynq" -PLATFORM_BOARD_DIR_zynqmp = "board/xilinx/zynqmp" - -do_zynq_platform_init() { - for f in ${PLATFORM_INIT_FILES}; do - if [ -d "${S}/${PLATFORM_BOARD_DIR}/custom_hw_platform" ]; then - cp ${PLATFORM_INIT_STAGE_DIR}/$f ${S}/${PLATFORM_BOARD_DIR}/custom_hw_platform/ - else - cp ${PLATFORM_INIT_STAGE_DIR}/$f ${S}/${PLATFORM_BOARD_DIR}/ - fi - # Newer u-boot sources use the init files in a sub directory named - # based on the name of the device tree. This is not straight forward to - # detect. Instead of detecting just overwrite all the platform init - # files so that the correct one is always used. This shotgun approach - # only works due to this recipe being machine arch specific. Do this - # overwrite un-conditionally as there is no guarantees that the chosen - # board config does not have the device tree config set. - for i in ${S}/${PLATFORM_BOARD_DIR}/*/; do - [ -d $i ] && cp ${PLATFORM_INIT_STAGE_DIR}/$f $i - done - done -} - -python () { - # strip the tail _config/_defconfig for better comparison - def strip_config_name(c): - for i in ["_config", "_defconfig"]: - if c.endswith(i): - return c[0:len(c) - len(i)] - return c - - if d.getVar("SOC_FAMILY") not in ["zynq", "zynqmp"]: - # continue on this is not a zynq/zynqmp target - return - - # Determine if target machine needs to provide a custom platform init files - if d.getVar("SPL_BINARY"): - hasconfigs = [strip_config_name(c) for c in (d.getVar("HAS_PLATFORM_INIT") or "").split()] - currentconfig = strip_config_name(d.getVar("UBOOT_MACHINE")) - - # only add the dependency if u-boot doesn't already provide the platform init files - if (currentconfig not in hasconfigs) or (d.getVar("FORCE_PLATFORM_INIT") == "1"): - # force the dependency on a recipe that provides the platform init files - d.appendVar("DEPENDS", " virtual/xilinx-platform-init") - # setup task to modify platform init after unpack and prepare_recipe_sysroot, and before configure - bb.build.addtask("do_zynq_platform_init", "do_configure", "do_unpack do_prepare_recipe_sysroot", d) - - if "boot.bin" not in d.getVar("SPL_BINARY"): - # not deploying the boot.bin, just building SPL - return - - # assume that U-Boot is to provide the boot.bin if no other provides are selected or U-Boot is selected - providesbin = not(d.getVar("PREFERRED_PROVIDER_virtual/boot-bin")) or d.getVar("PREFERRED_PROVIDER_virtual/boot-bin") == d.getVar("PN") - if providesbin: - # add provides, if U-Boot is set to provide boot.bin - d.appendVar("PROVIDES", " virtual/boot-bin") - else: - # prevent U-Boot from deploying the boot.bin - d.setVar("SPL_BINARY", "") - - if providesbin and d.getVar("SOC_FAMILY") in ["zynqmp"]: - # determine the path relative to the source tree - relpath = os.path.relpath(d.expand("${PMU_FIRMWARE_DEPLOY_DIR}/${PMU_FIRMWARE_IMAGE_NAME}.bin"), d.getVar("S")) - # setup PMU Firmware path via MAKEFLAGS - d.appendVar("EXTRA_OEMAKE", " CONFIG_PMUFW_INIT_FILE=\"{0}\"".format(relpath)) -} - diff --git a/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx-dev.bb b/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx-dev.bb deleted file mode 100644 index 3e40bfa1..00000000 --- a/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx-dev.bb +++ /dev/null @@ -1,28 +0,0 @@ -# This recipe allows for a 'bleeding edge' u-boot-xlnx build. -# Since this tree is frequently updated, AUTOREV is used to track its contents. -# -# To enable this recipe, set the following in your machine or local.conf -# PREFERRED_PROVIDER_virtual/bootloader ?= "u-boot-xlnx-dev" - -UBRANCH ?= "master" - -include u-boot-xlnx.inc -include u-boot-spl-zynq-init.inc - -LICENSE = "GPLv2+" -LIC_FILES_CHKSUM = "file://README;beginline=1;endline=6;md5=157ab8408beab40cd8ce1dc69f702a6c" - -SRCREV_DEFAULT = "aebea9d20a5aa32857f320c07ca8f9fd1b3dec1f" -SRCREV ?= "${@oe.utils.conditional("PREFERRED_PROVIDER_virtual/bootloader", "u-boot-xlnx-dev", "${AUTOREV}", "${SRCREV_DEFAULT}", d)}" - -PV = "${UBRANCH}-xilinx-dev+git${SRCPV}" - -# Newer versions of u-boot have support for these -HAS_PLATFORM_INIT ?= " \ - zynq_microzed_config \ - zynq_zed_config \ - zynq_zc702_config \ - zynq_zc706_config \ - zynq_zybo_config \ - " - diff --git a/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx.inc b/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx.inc deleted file mode 100644 index 737f5f91..00000000 --- a/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx.inc +++ /dev/null @@ -1,20 +0,0 @@ -require recipes-bsp/u-boot/u-boot.inc - -DEPENDS += "bc-native dtc-native bison-native" - -XILINX_RELEASE_VERSION ?= "" -UBOOT_VERSION_EXTENSION ?= "-xilinx-${XILINX_RELEASE_VERSION}" -PV = "${UBOOT_VERSION}${UBOOT_VERSION_EXTENSION}+git${SRCPV}" - -UBOOTURI ?= "git://github.com/Xilinx/u-boot-xlnx.git;protocol=https" -UBRANCH ?= "" -UBRANCHARG = "${@['nobranch=1', 'branch=${UBRANCH}'][d.getVar('UBRANCH', True) != '']}" - -SRC_URI = "${UBOOTURI};${UBRANCHARG}" - -S = "${WORKDIR}/git" - -FILESEXTRAPATHS_prepend := "${THISDIR}/u-boot:" -FILESEXTRAPATHS_prepend := "${THISDIR}/u-boot-xlnx:" -FILESEXTRAPATHS_prepend := "${@'${THISDIR}/u-boot-xlnx/${XILINX_RELEASE_VERSION}:' if d.getVar('XILINX_RELEASE_VERSION') else ''}" - diff --git a/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx/v2019.1/microblaze-kc705-Convert-microblaze-generic-to-k.patch b/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx/v2019.1/microblaze-kc705-Convert-microblaze-generic-to-k.patch deleted file mode 100644 index 7e25f87c..00000000 --- a/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx/v2019.1/microblaze-kc705-Convert-microblaze-generic-to-k.patch +++ /dev/null @@ -1,1133 +0,0 @@ -From afe880f500cff7a9486379c5ad7a4f3379015a62 Mon Sep 17 00:00:00 2001 -From: Jaewon Lee <jaewon.lee@xilinx.com> -Date: Mon, 14 Jan 2019 11:30:56 -0800 -Subject: [PATCH] kc705-microblazeel: Convert microblaze-generic to - kc705-microblazeel - -This is an update to earlier kc705-trd patch done by Nathan Rossi. - -Change the microblaze-generic board to match the kc705-microblazeel. -This patch is not intended for upstream and serves as an intermediate -solution until OF support in upstream u-boot allows for easy support for -custom microblaze boards. - -Signed-off-by: Jaewon Lee <jaewon.lee@xilinx.com> -Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com> -Upstream-Status: Not-Upstreamable [meta-xilinx/kc705 specific] ---- - arch/microblaze/dts/microblaze-generic.dts | 590 ++++++++++++++++++++++++++++- - board/xilinx/microblaze-generic/config.mk | 28 +- - configs/microblaze-generic_defconfig | 75 ++-- - include/configs/microblaze-generic.h | 348 ++++++++--------- - 4 files changed, 782 insertions(+), 259 deletions(-) - -diff --git a/arch/microblaze/dts/microblaze-generic.dts b/arch/microblaze/dts/microblaze-generic.dts -index 08a1396..f8e616b 100644 ---- a/arch/microblaze/dts/microblaze-generic.dts -+++ b/arch/microblaze/dts/microblaze-generic.dts -@@ -1,9 +1,587 @@ - /dts-v1/; -+ - / { -- #address-cells = <1>; -- #size-cells = <1>; -- aliases { -- } ; -+ #address-cells = <0x1>; -+ #size-cells = <0x1>; -+ compatible = "xlnx,microblaze"; -+ model = "Xilinx MicroBlaze"; -+ hard-reset-gpios = <0x1 0x0 0x1>; -+ -+ cpus { -+ #address-cells = <0x1>; -+ #cpus = <0x1>; -+ #size-cells = <0x0>; -+ -+ cpu@0 { -+ bus-handle = <0x2>; -+ clock-frequency = <0xbebc200>; -+ clocks = <0x3>; -+ compatible = "xlnx,microblaze-10.0"; -+ d-cache-baseaddr = <0x80000000>; -+ d-cache-highaddr = <0xbfffffff>; -+ d-cache-line-size = <0x20>; -+ d-cache-size = <0x4000>; -+ device_type = "cpu"; -+ i-cache-baseaddr = <0x80000000>; -+ i-cache-highaddr = <0xbfffffff>; -+ i-cache-line-size = <0x10>; -+ i-cache-size = <0x4000>; -+ interrupt-handle = <0x4>; -+ model = "microblaze,10.0"; -+ timebase-frequency = <0xbebc200>; -+ xlnx,addr-size = <0x20>; -+ xlnx,addr-tag-bits = <0x10>; -+ xlnx,allow-dcache-wr = <0x1>; -+ xlnx,allow-icache-wr = <0x1>; -+ xlnx,area-optimized = <0x0>; -+ xlnx,async-interrupt = <0x1>; -+ xlnx,async-wakeup = <0x3>; -+ xlnx,avoid-primitives = <0x0>; -+ xlnx,base-vectors = <0x0>; -+ xlnx,branch-target-cache-size = <0x0>; -+ xlnx,cache-byte-size = <0x4000>; -+ xlnx,d-axi = <0x1>; -+ xlnx,d-lmb = <0x1>; -+ xlnx,d-lmb-mon = <0x0>; -+ xlnx,daddr-size = <0x20>; -+ xlnx,data-size = <0x20>; -+ xlnx,dc-axi-mon = <0x0>; -+ xlnx,dcache-addr-tag = <0x10>; -+ xlnx,dcache-always-used = <0x1>; -+ xlnx,dcache-byte-size = <0x4000>; -+ xlnx,dcache-data-width = <0x0>; -+ xlnx,dcache-force-tag-lutram = <0x0>; -+ xlnx,dcache-line-len = <0x8>; -+ xlnx,dcache-use-writeback = <0x0>; -+ xlnx,dcache-victims = <0x0>; -+ xlnx,debug-counter-width = <0x20>; -+ xlnx,debug-enabled = <0x1>; -+ xlnx,debug-event-counters = <0x5>; -+ xlnx,debug-external-trace = <0x0>; -+ xlnx,debug-interface = <0x0>; -+ xlnx,debug-latency-counters = <0x1>; -+ xlnx,debug-profile-size = <0x0>; -+ xlnx,debug-trace-async-reset = <0x0>; -+ xlnx,debug-trace-size = <0x2000>; -+ xlnx,div-zero-exception = <0x1>; -+ xlnx,dp-axi-mon = <0x0>; -+ xlnx,dynamic-bus-sizing = <0x0>; -+ xlnx,ecc-use-ce-exception = <0x0>; -+ xlnx,edge-is-positive = <0x1>; -+ xlnx,enable-discrete-ports = <0x0>; -+ xlnx,endianness = <0x1>; -+ xlnx,fault-tolerant = <0x0>; -+ xlnx,fpu-exception = <0x0>; -+ xlnx,freq = <0xbebc200>; -+ xlnx,fsl-exception = <0x0>; -+ xlnx,fsl-links = <0x0>; -+ xlnx,i-axi = <0x0>; -+ xlnx,i-lmb = <0x1>; -+ xlnx,i-lmb-mon = <0x0>; -+ xlnx,iaddr-size = <0x20>; -+ xlnx,ic-axi-mon = <0x0>; -+ xlnx,icache-always-used = <0x1>; -+ xlnx,icache-data-width = <0x0>; -+ xlnx,icache-force-tag-lutram = <0x0>; -+ xlnx,icache-line-len = <0x4>; -+ xlnx,icache-streams = <0x1>; -+ xlnx,icache-victims = <0x8>; -+ xlnx,ill-opcode-exception = <0x1>; -+ xlnx,imprecise-exceptions = <0x0>; -+ xlnx,instr-size = <0x20>; -+ xlnx,interconnect = <0x2>; -+ xlnx,interrupt-is-edge = <0x0>; -+ xlnx,interrupt-mon = <0x0>; -+ xlnx,ip-axi-mon = <0x0>; -+ xlnx,lockstep-master = <0x0>; -+ xlnx,lockstep-select = <0x0>; -+ xlnx,lockstep-slave = <0x0>; -+ xlnx,mmu-dtlb-size = <0x4>; -+ xlnx,mmu-itlb-size = <0x2>; -+ xlnx,mmu-privileged-instr = <0x0>; -+ xlnx,mmu-tlb-access = <0x3>; -+ xlnx,mmu-zones = <0x2>; -+ xlnx,num-sync-ff-clk = <0x2>; -+ xlnx,num-sync-ff-clk-debug = <0x2>; -+ xlnx,num-sync-ff-clk-irq = <0x1>; -+ xlnx,num-sync-ff-dbg-clk = <0x1>; -+ xlnx,num-sync-ff-dbg-trace-clk = <0x2>; -+ xlnx,number-of-pc-brk = <0x1>; -+ xlnx,number-of-rd-addr-brk = <0x0>; -+ xlnx,number-of-wr-addr-brk = <0x0>; -+ xlnx,opcode-0x0-illegal = <0x1>; -+ xlnx,optimization = <0x0>; -+ xlnx,pc-width = <0x20>; -+ xlnx,piaddr-size = <0x20>; -+ xlnx,pvr = <0x2>; -+ xlnx,pvr-user1 = <0x0>; -+ xlnx,pvr-user2 = <0x0>; -+ xlnx,reset-msr = <0x0>; -+ xlnx,reset-msr-bip = <0x0>; -+ xlnx,reset-msr-dce = <0x0>; -+ xlnx,reset-msr-ee = <0x0>; -+ xlnx,reset-msr-eip = <0x0>; -+ xlnx,reset-msr-ice = <0x0>; -+ xlnx,reset-msr-ie = <0x0>; -+ xlnx,sco = <0x0>; -+ xlnx,trace = <0x0>; -+ xlnx,unaligned-exceptions = <0x1>; -+ xlnx,use-barrel = <0x1>; -+ xlnx,use-branch-target-cache = <0x0>; -+ xlnx,use-config-reset = <0x0>; -+ xlnx,use-dcache = <0x1>; -+ xlnx,use-div = <0x1>; -+ xlnx,use-ext-brk = <0x0>; -+ xlnx,use-ext-nm-brk = <0x0>; -+ xlnx,use-extended-fsl-instr = <0x0>; -+ xlnx,use-fpu = <0x0>; -+ xlnx,use-hw-mul = <0x2>; -+ xlnx,use-icache = <0x1>; -+ xlnx,use-interrupt = <0x2>; -+ xlnx,use-mmu = <0x3>; -+ xlnx,use-msr-instr = <0x1>; -+ xlnx,use-non-secure = <0x0>; -+ xlnx,use-pcmp-instr = <0x1>; -+ xlnx,use-reorder-instr = <0x1>; -+ xlnx,use-stack-protection = <0x0>; -+ }; -+ }; -+ -+ clocks { -+ #address-cells = <0x1>; -+ #size-cells = <0x0>; -+ -+ clk_cpu@0 { -+ #clock-cells = <0x0>; -+ clock-frequency = <0xbebc200>; -+ clock-output-names = "clk_cpu"; -+ compatible = "fixed-clock"; -+ reg = <0x0>; -+ linux,phandle = <0x3>; -+ phandle = <0x3>; -+ }; -+ -+ clk_bus_0@1 { -+ #clock-cells = <0x0>; -+ clock-frequency = <0xbebc200>; -+ clock-output-names = "clk_bus_0"; -+ compatible = "fixed-clock"; -+ reg = <0x1>; -+ linux,phandle = <0x8>; -+ phandle = <0x8>; -+ }; -+ }; -+ -+ amba_pl { -+ #address-cells = <0x1>; -+ #size-cells = <0x1>; -+ compatible = "simple-bus"; -+ ranges; -+ linux,phandle = <0x2>; -+ phandle = <0x2>; -+ -+ ethernet@40c00000 { -+ axistream-connected = <0x5>; -+ axistream-control-connected = <0x5>; -+ clock-frequency = <0x5f5e100>; -+ compatible = "xlnx,axi-ethernet-1.00.a"; -+ device_type = "network"; -+ interrupt-names = "interrupt"; -+ interrupt-parent = <0x4>; -+ interrupts = <0x4 0x2>; -+ phy-mode = "gmii"; -+ reg = <0x40c00000 0x40000>; -+ xlnx = <0x0>; -+ xlnx,axiliteclkrate = <0x0>; -+ xlnx,axisclkrate = <0x0>; -+ xlnx,clockselection = <0x0>; -+ xlnx,enableasyncsgmii = <0x0>; -+ xlnx,gt-type = <0x0>; -+ xlnx,gtinex = <0x0>; -+ xlnx,gtlocation = <0x0>; -+ xlnx,gtrefclksrc = <0x0>; -+ xlnx,include-dre; -+ xlnx,instantiatebitslice0 = <0x0>; -+ xlnx,phy-type = <0x1>; -+ xlnx,phyaddr = <0x1>; -+ xlnx,rable = <0x0>; -+ xlnx,rxcsum = <0x0>; -+ xlnx,rxlane0-placement = <0x0>; -+ xlnx,rxlane1-placement = <0x0>; -+ xlnx,rxmem = <0x1000>; -+ xlnx,rxnibblebitslice0used = <0x0>; -+ xlnx,tx-in-upper-nibble = <0x1>; -+ xlnx,txcsum = <0x0>; -+ xlnx,txlane0-placement = <0x0>; -+ xlnx,txlane1-placement = <0x0>; -+ phy-handle = <0x6>; -+ local-mac-address = [00 0a 35 00 22 01]; -+ linux,phandle = <0x7>; -+ phandle = <0x7>; -+ -+ mdio { -+ #address-cells = <0x1>; -+ #size-cells = <0x0>; -+ -+ phy@7 { -+ device_type = "ethernet-phy"; -+ reg = <0x7>; -+ linux,phandle = <0x6>; -+ phandle = <0x6>; -+ }; -+ }; -+ }; -+ -+ dma@41e00000 { -+ #dma-cells = <0x1>; -+ axistream-connected = <0x7>; -+ axistream-control-connected = <0x7>; -+ clock-frequency = <0xbebc200>; -+ clock-names = "s_axi_lite_aclk"; -+ clocks = <0x8>; -+ compatible = "xlnx,eth-dma"; -+ interrupt-names = "mm2s_introut", "s2mm_introut"; -+ interrupt-parent = <0x4>; -+ interrupts = <0x3 0x2 0x2 0x2>; -+ reg = <0x41e00000 0x10000>; -+ xlnx,include-dre; -+ linux,phandle = <0x5>; -+ phandle = <0x5>; -+ }; -+ -+ timer@41c00000 { -+ clock-frequency = <0xbebc200>; -+ clocks = <0x8>; -+ compatible = "xlnx,xps-timer-1.00.a"; -+ interrupt-names = "interrupt"; -+ interrupt-parent = <0x4>; -+ interrupts = <0x5 0x2>; -+ reg = <0x41c00000 0x10000>; -+ xlnx,count-width = <0x20>; -+ xlnx,gen0-assert = <0x1>; -+ xlnx,gen1-assert = <0x1>; -+ xlnx,one-timer-only = <0x0>; -+ xlnx,trig0-assert = <0x1>; -+ xlnx,trig1-assert = <0x1>; -+ }; -+ -+ gpio@40010000 { -+ #gpio-cells = <0x2>; -+ clock-frequency = <0xbebc200>; -+ clock-names = "s_axi_aclk"; -+ clocks = <0x8>; -+ compatible = "xlnx,xps-gpio-1.00.a"; -+ gpio-controller; -+ reg = <0x40010000 0x10000>; -+ xlnx,all-inputs = <0x1>; -+ xlnx,all-inputs-2 = <0x0>; -+ xlnx,all-outputs = <0x0>; -+ xlnx,all-outputs-2 = <0x0>; -+ xlnx,dout-default = <0x0>; -+ xlnx,dout-default-2 = <0x0>; -+ xlnx,gpio-width = <0x1>; -+ xlnx,gpio2-width = <0x20>; -+ xlnx,interrupt-present = <0x0>; -+ xlnx,is-dual = <0x0>; -+ xlnx,tri-default = <0xffffffff>; -+ xlnx,tri-default-2 = <0xffffffff>; -+ }; -+ -+ gpio@40020000 { -+ #gpio-cells = <0x2>; -+ clock-frequency = <0xbebc200>; -+ clock-names = "s_axi_aclk"; -+ clocks = <0x8>; -+ compatible = "xlnx,xps-gpio-1.00.a"; -+ gpio-controller; -+ reg = <0x40020000 0x10000>; -+ xlnx,all-inputs = <0x1>; -+ xlnx,all-inputs-2 = <0x0>; -+ xlnx,all-outputs = <0x0>; -+ xlnx,all-outputs-2 = <0x0>; -+ xlnx,dout-default = <0x0>; -+ xlnx,dout-default-2 = <0x0>; -+ xlnx,gpio-width = <0x4>; -+ xlnx,gpio2-width = <0x20>; -+ xlnx,interrupt-present = <0x0>; -+ xlnx,is-dual = <0x0>; -+ xlnx,tri-default = <0xffffffff>; -+ xlnx,tri-default-2 = <0xffffffff>; -+ }; -+ -+ i2c@40800000 { -+ #address-cells = <0x1>; -+ #size-cells = <0x0>; -+ clock-frequency = <0xbebc200>; -+ clocks = <0x8>; -+ compatible = "xlnx,xps-iic-2.00.a"; -+ interrupt-names = "iic2intc_irpt"; -+ interrupt-parent = <0x4>; -+ interrupts = <0x1 0x2>; -+ reg = <0x40800000 0x10000>; -+ -+ i2cswitch@74 { -+ compatible = "nxp,pca9548"; -+ #address-cells = <0x1>; -+ #size-cells = <0x0>; -+ reg = <0x74>; -+ -+ i2c@0 { -+ #address-cells = <0x1>; -+ #size-cells = <0x0>; -+ reg = <0x0>; -+ -+ clock-generator@5d { -+ #clock-cells = <0x0>; -+ compatible = "silabs,si570"; -+ temperature-stability = <0x32>; -+ reg = <0x5d>; -+ factory-fout = <0x9502f90>; -+ clock-frequency = <0x8d9ee20>; -+ }; -+ }; -+ -+ i2c@3 { -+ #address-cells = <0x1>; -+ #size-cells = <0x0>; -+ reg = <0x3>; -+ -+ eeprom@54 { -+ compatible = "at,24c08"; -+ reg = <0x54>; -+ }; -+ }; -+ }; -+ }; -+ -+ gpio@40030000 { -+ #gpio-cells = <0x2>; -+ clock-frequency = <0xbebc200>; -+ clock-names = "s_axi_aclk"; -+ clocks = <0x8>; -+ compatible = "xlnx,xps-gpio-1.00.a"; -+ gpio-controller; -+ reg = <0x40030000 0x10000>; -+ xlnx,all-inputs = <0x0>; -+ xlnx,all-inputs-2 = <0x0>; -+ xlnx,all-outputs = <0x1>; -+ xlnx,all-outputs-2 = <0x0>; -+ xlnx,dout-default = <0x0>; -+ xlnx,dout-default-2 = <0x0>; -+ xlnx,gpio-width = <0x8>; -+ xlnx,gpio2-width = <0x20>; -+ xlnx,interrupt-present = <0x0>; -+ xlnx,is-dual = <0x0>; -+ xlnx,tri-default = <0xffffffff>; -+ xlnx,tri-default-2 = <0xffffffff>; -+ }; -+ -+ flash@60000000 { -+ bank-width = <0x2>; -+ compatible = "cfi-flash"; -+ reg = <0x60000000 0x8000000>; -+ xlnx,axi-clk-period-ps = <0x1388>; -+ xlnx,include-datawidth-matching-0 = <0x1>; -+ xlnx,include-datawidth-matching-1 = <0x1>; -+ xlnx,include-datawidth-matching-2 = <0x1>; -+ xlnx,include-datawidth-matching-3 = <0x1>; -+ xlnx,include-negedge-ioregs = <0x0>; -+ xlnx,lflash-period-ps = <0x1388>; -+ xlnx,linear-flash-sync-burst = <0x0>; -+ xlnx,max-mem-width = <0x10>; -+ xlnx,mem-a-lsb = <0x0>; -+ xlnx,mem-a-msb = <0x1f>; -+ xlnx,mem0-type = <0x2>; -+ xlnx,mem0-width = <0x10>; -+ xlnx,mem1-type = <0x0>; -+ xlnx,mem1-width = <0x10>; -+ xlnx,mem2-type = <0x0>; -+ xlnx,mem2-width = <0x10>; -+ xlnx,mem3-type = <0x0>; -+ xlnx,mem3-width = <0x10>; -+ xlnx,num-banks-mem = <0x1>; -+ xlnx,page-size = <0x10>; -+ xlnx,parity-type-mem-0 = <0x0>; -+ xlnx,parity-type-mem-1 = <0x0>; -+ xlnx,parity-type-mem-2 = <0x0>; -+ xlnx,parity-type-mem-3 = <0x0>; -+ xlnx,port-diff = <0x0>; -+ xlnx,s-axi-en-reg = <0x0>; -+ xlnx,s-axi-mem-addr-width = <0x20>; -+ xlnx,s-axi-mem-data-width = <0x20>; -+ xlnx,s-axi-mem-id-width = <0x1>; -+ xlnx,s-axi-reg-addr-width = <0x5>; -+ xlnx,s-axi-reg-data-width = <0x20>; -+ xlnx,synch-pipedelay-0 = <0x1>; -+ xlnx,synch-pipedelay-1 = <0x1>; -+ xlnx,synch-pipedelay-2 = <0x1>; -+ xlnx,synch-pipedelay-3 = <0x1>; -+ xlnx,tavdv-ps-mem-0 = <0x1fbd0>; -+ xlnx,tavdv-ps-mem-1 = <0x3a98>; -+ xlnx,tavdv-ps-mem-2 = <0x3a98>; -+ xlnx,tavdv-ps-mem-3 = <0x3a98>; -+ xlnx,tcedv-ps-mem-0 = <0x1fbd0>; -+ xlnx,tcedv-ps-mem-1 = <0x3a98>; -+ xlnx,tcedv-ps-mem-2 = <0x3a98>; -+ xlnx,tcedv-ps-mem-3 = <0x3a98>; -+ xlnx,thzce-ps-mem-0 = <0x88b8>; -+ xlnx,thzce-ps-mem-1 = <0x1b58>; -+ xlnx,thzce-ps-mem-2 = <0x1b58>; -+ xlnx,thzce-ps-mem-3 = <0x1b58>; -+ xlnx,thzoe-ps-mem-0 = <0x1b58>; -+ xlnx,thzoe-ps-mem-1 = <0x1b58>; -+ xlnx,thzoe-ps-mem-2 = <0x1b58>; -+ xlnx,thzoe-ps-mem-3 = <0x1b58>; -+ xlnx,tlzwe-ps-mem-0 = <0xc350>; -+ xlnx,tlzwe-ps-mem-1 = <0x0>; -+ xlnx,tlzwe-ps-mem-2 = <0x0>; -+ xlnx,tlzwe-ps-mem-3 = <0x0>; -+ xlnx,tpacc-ps-flash-0 = <0x61a8>; -+ xlnx,tpacc-ps-flash-1 = <0x61a8>; -+ xlnx,tpacc-ps-flash-2 = <0x61a8>; -+ xlnx,tpacc-ps-flash-3 = <0x61a8>; -+ xlnx,twc-ps-mem-0 = <0x11170>; -+ xlnx,twc-ps-mem-1 = <0x3a98>; -+ xlnx,twc-ps-mem-2 = <0x3a98>; -+ xlnx,twc-ps-mem-3 = <0x3a98>; -+ xlnx,twp-ps-mem-0 = <0x13880>; -+ xlnx,twp-ps-mem-1 = <0x2ee0>; -+ xlnx,twp-ps-mem-2 = <0x2ee0>; -+ xlnx,twp-ps-mem-3 = <0x2ee0>; -+ xlnx,twph-ps-mem-0 = <0x13880>; -+ xlnx,twph-ps-mem-1 = <0x2ee0>; -+ xlnx,twph-ps-mem-2 = <0x2ee0>; -+ xlnx,twph-ps-mem-3 = <0x2ee0>; -+ xlnx,use-startup = <0x0>; -+ xlnx,use-startup-int = <0x0>; -+ xlnx,wr-rec-time-mem-0 = <0x186a0>; -+ xlnx,wr-rec-time-mem-1 = <0x6978>; -+ xlnx,wr-rec-time-mem-2 = <0x6978>; -+ xlnx,wr-rec-time-mem-3 = <0x6978>; -+ #address-cells = <0x1>; -+ #size-cells = <0x1>; -+ -+ partition@0x00000000 { -+ label = "fpga"; -+ reg = <0x0 0xb00000>; -+ }; -+ -+ partition@0x00b00000 { -+ label = "boot"; -+ reg = <0xb00000 0x80000>; -+ }; -+ -+ partition@0x00b80000 { -+ label = "bootenv"; -+ reg = <0xb80000 0x20000>; -+ }; -+ -+ partition@0x00ba0000 { -+ label = "kernel"; -+ reg = <0xba0000 0xc00000>; -+ }; -+ -+ partition@0x017a0000 { -+ label = "spare"; -+ reg = <0x17a0000 0x0>; -+ }; -+ }; -+ -+ interrupt-controller@41200000 { -+ #interrupt-cells = <0x2>; -+ compatible = "xlnx,xps-intc-1.00.a"; -+ interrupt-controller; -+ reg = <0x41200000 0x10000>; -+ xlnx,kind-of-intr = <0x0>; -+ xlnx,num-intr-inputs = <0x6>; -+ linux,phandle = <0x4>; -+ phandle = <0x4>; -+ }; -+ -+ gpio@40040000 { -+ #gpio-cells = <0x2>; -+ clock-frequency = <0xbebc200>; -+ clock-names = "s_axi_aclk"; -+ clocks = <0x8>; -+ compatible = "xlnx,xps-gpio-1.00.a"; -+ gpio-controller; -+ reg = <0x40040000 0x10000>; -+ xlnx,all-inputs = <0x1>; -+ xlnx,all-inputs-2 = <0x0>; -+ xlnx,all-outputs = <0x0>; -+ xlnx,all-outputs-2 = <0x0>; -+ xlnx,dout-default = <0x0>; -+ xlnx,dout-default-2 = <0x0>; -+ xlnx,gpio-width = <0x5>; -+ xlnx,gpio2-width = <0x20>; -+ xlnx,interrupt-present = <0x0>; -+ xlnx,is-dual = <0x0>; -+ xlnx,tri-default = <0xffffffff>; -+ xlnx,tri-default-2 = <0xffffffff>; -+ }; -+ -+ gpio@40000000 { -+ #gpio-cells = <0x2>; -+ clock-frequency = <0xbebc200>; -+ clock-names = "s_axi_aclk"; -+ clocks = <0x8>; -+ compatible = "xlnx,xps-gpio-1.00.a"; -+ gpio-controller; -+ reg = <0x40000000 0x10000>; -+ xlnx,all-inputs = <0x0>; -+ xlnx,all-inputs-2 = <0x0>; -+ xlnx,all-outputs = <0x1>; -+ xlnx,all-outputs-2 = <0x0>; -+ xlnx,dout-default = <0x0>; -+ xlnx,dout-default-2 = <0x0>; -+ xlnx,gpio-width = <0x1>; -+ xlnx,gpio2-width = <0x20>; -+ xlnx,interrupt-present = <0x0>; -+ xlnx,is-dual = <0x0>; -+ xlnx,tri-default = <0xffffffff>; -+ xlnx,tri-default-2 = <0xffffffff>; -+ linux,phandle = <0x1>; -+ phandle = <0x1>; -+ }; -+ -+ serial@44a00000 { -+ clock-frequency = <0xbebc200>; -+ clocks = <0x8>; -+ compatible = "xlnx,xps-uart16550-2.00.a", "ns16550a"; -+ current-speed = <0x1c200>; -+ device_type = "serial"; -+ interrupt-names = "ip2intc_irpt"; -+ interrupt-parent = <0x4>; -+ interrupts = <0x0 0x2>; -+ port-number = <0x0>; -+ reg = <0x44a00000 0x10000>; -+ reg-offset = <0x1000>; -+ reg-shift = <0x2>; -+ xlnx,external-xin-clk-hz = <0x17d7840>; -+ xlnx,external-xin-clk-hz-d = <0x19>; -+ xlnx,has-external-rclk = <0x0>; -+ xlnx,has-external-xin = <0x0>; -+ xlnx,is-a-16550 = <0x1>; -+ xlnx,s-axi-aclk-freq-hz-d = "200.0"; -+ xlnx,use-modem-ports = <0x1>; -+ xlnx,use-user-ports = <0x1>; -+ }; -+ }; -+ - chosen { -- } ; --} ; -+ bootargs = "console=ttyS0,115200 earlyprintk"; -+ stdout-path = "serial0:115200n8"; -+ }; -+ -+ aliases { -+ ethernet0 = "/amba_pl/ethernet@40c00000"; -+ i2c0 = "/amba_pl/i2c@40800000"; -+ serial0 = "/amba_pl/serial@44a00000"; -+ }; -+ -+ memory { -+ device_type = "memory"; -+ reg = <0x80000000 0x40000000>; -+ }; -+}; -+ -diff --git a/board/xilinx/microblaze-generic/config.mk b/board/xilinx/microblaze-generic/config.mk -index a953977..cb75fde 100644 ---- a/board/xilinx/microblaze-generic/config.mk -+++ b/board/xilinx/microblaze-generic/config.mk -@@ -1,18 +1,10 @@ --# SPDX-License-Identifier: GPL-2.0+ --# --# (C) Copyright 2007 - 2016 Michal Simek --# --# Michal SIMEK <monstr@monstr.eu> -- --CPU_VER := $(shell echo $(CONFIG_XILINX_MICROBLAZE0_HW_VER)) -- --# USE_HW_MUL can be 0, 1, or 2, defining a hierarchy of HW Mul support. --CPUFLAGS-$(subst 1,,$(CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL)) += -mxl-multiply-high --CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL) += -mno-xl-soft-mul --CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_DIV) += -mno-xl-soft-div --CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_BARREL) += -mxl-barrel-shift --CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR) += -mxl-pattern-compare -- --CPUFLAGS-1 += $(call cc-option,-mcpu=v$(CPU_VER)) -- --PLATFORM_CPPFLAGS += $(CPUFLAGS-1) $(CPUFLAGS-2) -+TEXT_BASE = 0x80400000 -+CONFIG_SYS_TEXT_BASE = 0x80400000 -+ -+PLATFORM_CPPFLAGS += -mxl-barrel-shift -+PLATFORM_CPPFLAGS += -mno-xl-soft-div -+PLATFORM_CPPFLAGS += -mxl-pattern-compare -+PLATFORM_CPPFLAGS += -mxl-multiply-high -+PLATFORM_CPPFLAGS += -mno-xl-soft-mul -+PLATFORM_CPPFLAGS += -mcpu=v11.0 -+PLATFORM_CPPFLAGS += -fgnu89-inline -diff --git a/configs/microblaze-generic_defconfig b/configs/microblaze-generic_defconfig -index 02e62e2..8d64be4 100644 ---- a/configs/microblaze-generic_defconfig -+++ b/configs/microblaze-generic_defconfig -@@ -1,73 +1,58 @@ - CONFIG_MICROBLAZE=y --CONFIG_SYS_TEXT_BASE=0x29000000 - CONFIG_SPL_LIBCOMMON_SUPPORT=y - CONFIG_SPL_LIBGENERIC_SUPPORT=y - CONFIG_SPL_SERIAL_SUPPORT=y --CONFIG_SPL=y - CONFIG_TARGET_MICROBLAZE_GENERIC=y - CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1 - CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1 - CONFIG_XILINX_MICROBLAZE0_USE_DIV=1 - CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=1 --CONFIG_NR_DRAM_BANKS=1 -+CONFIG_SYS_TEXT_BASE=0x80400000 -+CONFIG_DEFAULT_DEVICE_TREE="microblaze-generic" - CONFIG_FIT=y - CONFIG_FIT_VERBOSE=y --CONFIG_BOOTDELAY=-1 --CONFIG_USE_BOOTARGS=y --CONFIG_BOOTARGS="root=romfs" -+CONFIG_BOOTDELAY=4 - CONFIG_SYS_CONSOLE_IS_IN_ENV=y --CONFIG_DISPLAY_BOARDINFO=y --CONFIG_SPL_BOARD_INIT=y --CONFIG_SPL_SYS_MALLOC_SIMPLE=y - CONFIG_SPL_NOR_SUPPORT=y - CONFIG_SPL_OS_BOOT=y - CONFIG_SYS_OS_BASE=0x2c060000 - CONFIG_HUSH_PARSER=y --# CONFIG_AUTO_COMPLETE is not set --CONFIG_SYS_PROMPT="U-Boot-mONStR> " --CONFIG_CMD_IMLS=y --CONFIG_CMD_SPL=y -+CONFIG_SYS_PROMPT="U-Boot> " - CONFIG_CMD_ASKENV=y --CONFIG_CMD_GPIO=y - CONFIG_CMD_SAVES=y - # CONFIG_CMD_SETEXPR is not set -+CONFIG_SYS_ENET=y -+CONFIG_NET=y -+CONFIG_NETDEVICES=y -+CONFIG_CMD_NET=y - CONFIG_CMD_DHCP=y --CONFIG_CMD_TFTPPUT=y -+CONFIG_CMD_NFS=y - CONFIG_CMD_MII=y - CONFIG_CMD_PING=y - CONFIG_CMD_JFFS2=y --CONFIG_SPL_OF_CONTROL=y - CONFIG_OF_EMBED=y --CONFIG_DEFAULT_DEVICE_TREE="microblaze-generic" --CONFIG_NETCONSOLE=y --CONFIG_SPL_DM=y -+CONFIG_DM_ETH=y -+CONFIG_SYS_MALLOC_F=y -+CONFIG_SYS_GENERIC_BOARD=y -+CONFIG_XILINX_AXIEMAC=y -+CONFIG_SYS_NS16550=y -+CONFIG_CMD_FLASH=y -+CONFIG_MTD_NOR_FLASH=y -+CONFIG_CMD_IMLS=y -+CONFIG_CMD_GPIO=y - CONFIG_DM_GPIO=y - CONFIG_XILINX_GPIO=y --CONFIG_LED=y --CONFIG_LED_GPIO=y --CONFIG_MTD_NOR_FLASH=y --CONFIG_MTD_DEVICE=y --CONFIG_FLASH_CFI_DRIVER=y --CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y --CONFIG_FLASH_CFI_MTD=y --CONFIG_SYS_FLASH_PROTECTION=y --CONFIG_SYS_FLASH_CFI=y --CONFIG_PHY_ATHEROS=y --CONFIG_PHY_BROADCOM=y --CONFIG_PHY_DAVICOM=y --CONFIG_PHY_LXT=y --CONFIG_PHY_MARVELL=y -+CONFIG_CMD_TFTPPUT=y -+CONFIG_NETCONSOLE=y -+CONFIG_XILINX_FSL_LINKS=0 -+CONFIG_PHY_GIGE=y -+CONFIG_ENV_IS_IN_FLASH=y - CONFIG_PHY_MICREL=y - CONFIG_PHY_MICREL_KSZ90X1=y --CONFIG_PHY_NATSEMI=y --CONFIG_PHY_REALTEK=y --CONFIG_PHY_VITESSE=y --CONFIG_DM_ETH=y --CONFIG_XILINX_AXIEMAC=y --CONFIG_XILINX_EMACLITE=y --CONFIG_SYS_NS16550=y --CONFIG_XILINX_UARTLITE=y --CONFIG_SYSRESET_GPIO=y --CONFIG_SYSRESET_MICROBLAZE=y --CONFIG_WDT=y --CONFIG_XILINX_TB_WATCHDOG=y -+CONFIG_SPL_DM_SERIAL=y -+CONFIG_SPL_OF_LIBFDT=y -+CONFIG_PHY_XILINX=y -+# CONFIG_SPL is not set -+# CONFIG_CMD_EEPROM is not set -+# CONFIG_BOOTARGS is not set -+# CONFIG_USE_BOOTARGS is not set -diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h -index ba0952c..fd1da2b 100644 ---- a/include/configs/microblaze-generic.h -+++ b/include/configs/microblaze-generic.h -@@ -1,205 +1,173 @@ --/* SPDX-License-Identifier: GPL-2.0+ */ --/* -- * (C) Copyright 2007-2010 Michal Simek -- * -- * Michal SIMEK <monstr@monstr.eu> -- */ -- - #ifndef __CONFIG_H - #define __CONFIG_H - --#include "../board/xilinx/microblaze-generic/xparameters.h" -- --/* MicroBlaze CPU */ --#define MICROBLAZE_V5 1 -- --/* linear and spi flash memory */ --#ifdef XILINX_FLASH_START --#define FLASH --#undef SPIFLASH --#undef RAMENV /* hold environment in flash */ --#else --#undef FLASH --#undef SPIFLASH --#define RAMENV /* hold environment in RAM */ --#endif -+#define CONFIG_SYS_BAUDRATE_TABLE { 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400 } -+ -+/* processor - microblaze_0 */ -+#define XILINX_USE_MSR_INSTR 1 -+#define XILINX_USE_ICACHE 1 -+#define XILINX_USE_DCACHE 1 -+#define XILINX_DCACHE_BYTE_SIZE 16384 -+#define XILINX_PVR 2 -+#define MICROBLAZE_V5 -+#define CONFIG_CMD_IRQ -+#define CONFIG_DCACHE -+#define CONFIG_ICACHE -+ -+/* main_memory - ddr3_sdram */ -+ -+ -+/* uart - rs232_uart */ -+#define CONFIG_SYS_NS16550_COM1 ((XILINX_UART16550_BASEADDR & ~0xF) + 0x1000) -+#define CONFIG_SYS_NS16550_REG_SIZE -4 -+#define CONSOLE_ARG "console=console=ttyS0,115200\0" -+#define CONFIG_SYS_NS16550_SERIAL -+#define CONFIG_CONS_INDEX 1 -+#define ESERIAL0 "eserial0=setenv stdout eserial0;setenv stdin eserial0\0" -+#define SERIAL_MULTI "serial=setenv stdout serial;setenv stdin serial\0" -+#define CONFIG_SYS_NS16550_CLK 200000000 -+#define CONFIG_BAUDRATE 115200 -+ -+/* ethernet - axi_ethernet */ -+#define CONFIG_PHY_XILINX -+#define CONFIG_MII -+#define CONFIG_PHY_MARVELL -+#define CONFIG_PHY_NATSEMI -+#define CONFIG_NET_MULTI -+#define CONFIG_PHY_REALTEK -+#define CONFIG_NETCONSOLE 1 -+#define CONFIG_SERVERIP 172.25.229.115 -+#define CONFIG_IPADDR -+ -+/* nor_flash - linear_flash */ -+#define CONFIG_SYS_FLASH_BASE 0x60000000 -+#define CONFIG_FLASH_END 0x68000000 -+#define CONFIG_SYS_MAX_FLASH_SECT 2048 -+#define CONFIG_SYS_FLASH_PROTECTION -+#define CONFIG_SYS_FLASH_EMPTY_INFO -+#define CONFIG_SYS_FLASH_CFI -+#define CONFIG_FLASH_CFI_DRIVER -+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE -+#define CONFIG_SYS_MAX_FLASH_BANKS 1 -+ -+/* timer - axi_timer_0 */ -+ -+/* intc - microblaze_0_axi_intc */ -+ -+/* FPGA */ -+ -+/* Memory testing handling */ -+#define CONFIG_SYS_MEMTEST_START 0x80000000 -+#define CONFIG_SYS_MEMTEST_END (0x80000000 + 0x1000) -+#define CONFIG_SYS_LOAD_ADDR 0x80000000 /* default load address */ -+ -+/* global pointer options */ -+#define CONFIG_SYS_GBL_DATA_OFFSET (0x40000000 - GENERATED_GBL_DATA_SIZE) -+ -+/* Size of malloc() pool */ -+#define SIZE 0x100000 -+#define CONFIG_SYS_MALLOC_LEN SIZE -+#define CONFIG_SYS_MONITOR_LEN SIZE -+#define CONFIG_SYS_MONITOR_BASE (0x80000000 + CONFIG_SYS_GBL_DATA_OFFSET - CONFIG_SYS_MONITOR_LEN - GENERATED_BD_INFO_SIZE) -+#define CONFIG_SYS_MALLOC_BASE (CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN) -+ -+/* stack */ -+#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_TEXT_BASE - CONFIG_SYS_MALLOC_F_LEN) -+ -+/* No of_control support yet*/ -+ -+/* BOOTP options */ -+#define CONFIG_BOOTP_SERVERIP -+#define CONFIG_BOOTP_BOOTFILESIZE -+#define CONFIG_BOOTP_BOOTPATH -+#define CONFIG_BOOTP_GATEWAY -+#define CONFIG_BOOTP_HOSTNAME -+#define CONFIG_BOOTP_MAY_FAIL -+#define CONFIG_BOOTP_DNS -+#define CONFIG_BOOTP_SUBNETMASK -+#define CONFIG_BOOTP_PXE - --/* uart */ --/* The following table includes the supported baudrates */ --# define CONFIG_SYS_BAUDRATE_TABLE \ -- {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400} -- --/* setting reset address */ --/*#define CONFIG_SYS_RESET_ADDRESS CONFIG_SYS_TEXT_BASE*/ -- --#define CONFIG_SYS_MALLOC_LEN 0xC0000 -- --/* Stack location before relocation */ --#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_TEXT_BASE - \ -- CONFIG_SYS_MALLOC_F_LEN) -- --/* -- * CFI flash memory layout - Example -- * CONFIG_SYS_FLASH_BASE = 0x2200_0000; -- * CONFIG_SYS_FLASH_SIZE = 0x0080_0000; 8MB -- * -- * SECT_SIZE = 0x20000; 128kB is one sector -- * CONFIG_ENV_SIZE = SECT_SIZE; 128kB environment store -- * -- * 0x2200_0000 CONFIG_SYS_FLASH_BASE -- * FREE 256kB -- * 0x2204_0000 CONFIG_ENV_ADDR -- * ENV_AREA 128kB -- * 0x2206_0000 -- * FREE -- * 0x2280_0000 CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_SIZE -- * -- */ -- --#ifdef FLASH --# define CONFIG_SYS_FLASH_BASE XILINX_FLASH_START --# define CONFIG_SYS_FLASH_SIZE XILINX_FLASH_SIZE --/* ?empty sector */ --# define CONFIG_SYS_FLASH_EMPTY_INFO 1 --/* max number of memory banks */ --# define CONFIG_SYS_MAX_FLASH_BANKS 1 --/* max number of sectors on one chip */ --# define CONFIG_SYS_MAX_FLASH_SECT 512 --/* hardware flash protection */ --/* use buffered writes (20x faster) */ --# ifdef RAMENV --# define CONFIG_ENV_SIZE 0x1000 --# define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE) -- --# else /* FLASH && !RAMENV */ --/* 128K(one sector) for env */ --# define CONFIG_ENV_SECT_SIZE 0x20000 --# define CONFIG_ENV_ADDR \ -- (CONFIG_SYS_FLASH_BASE + (2 * CONFIG_ENV_SECT_SIZE)) --# define CONFIG_ENV_SIZE 0x20000 --# endif /* FLASH && !RAMBOOT */ --#else /* !FLASH */ -- --#ifdef SPIFLASH --# define CONFIG_SF_DEFAULT_MODE SPI_MODE_3 --# define CONFIG_SF_DEFAULT_SPEED XILINX_SPI_FLASH_MAX_FREQ --# define CONFIG_SF_DEFAULT_CS XILINX_SPI_FLASH_CS -- --# ifdef RAMENV --# define CONFIG_ENV_SIZE 0x1000 --# define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE) -- --# else /* SPIFLASH && !RAMENV */ --# define CONFIG_ENV_SPI_MODE SPI_MODE_3 --# define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED --# define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS --/* 128K(two sectors) for env */ --# define CONFIG_ENV_SECT_SIZE 0x10000 --# define CONFIG_ENV_SIZE (2 * CONFIG_ENV_SECT_SIZE) --/* Warning: adjust the offset in respect of other flash content and size */ --# define CONFIG_ENV_OFFSET (128 * CONFIG_ENV_SECT_SIZE) /* at 8MB */ --# endif /* SPIFLASH && !RAMBOOT */ --#else /* !SPIFLASH */ -- --/* ENV in RAM */ --# define CONFIG_ENV_SIZE 0x1000 --# define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE) --#endif /* !SPIFLASH */ --#endif /* !FLASH */ -- --#if defined(XILINX_USE_ICACHE) --# define CONFIG_ICACHE --#else --# undef CONFIG_ICACHE --#endif -+/*Command line configuration.*/ -+#define CONFIG_CMDLINE_EDITING -+#define CONFIG_AUTO_COMPLETE - --#if defined(XILINX_USE_DCACHE) --# define CONFIG_DCACHE --#else --# undef CONFIG_DCACHE --#endif -+/* Miscellaneous configurable options */ -+#define CONFIG_SYS_CBSIZE 2048/* Console I/O Buffer Size */ -+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - --#ifndef XILINX_DCACHE_BYTE_SIZE --#define XILINX_DCACHE_BYTE_SIZE 32768 --#endif - --/* -- * BOOTP options -- */ --#define CONFIG_BOOTP_BOOTFILESIZE -+/* Use the HUSH parser */ -+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " - --#if defined(CONFIG_MTD_PARTITIONS) --/* MTD partitions */ -+#define CONFIG_ENV_VARS_UBOOT_CONFIG -+#define CONFIG_ENV_OVERWRITE /* Allow to overwrite the u-boot environment variables */ - --/* default mtd partition table */ --#endif -+#define CONFIG_LMB - --/* size of console buffer */ --#define CONFIG_SYS_CBSIZE 512 --/* max number of command args */ --#define CONFIG_SYS_MAXARGS 15 --/* default load address */ --#define CONFIG_SYS_LOAD_ADDR 0 -+/* FDT support */ -+#define CONFIG_DISPLAY_BOARDINFO_LATE - --#define CONFIG_HOSTNAME "microblaze-generic" --#define CONFIG_BOOTCOMMAND "base 0;tftp 11000000 image.img;bootm" - - /* architecture dependent code */ --#define CONFIG_SYS_USR_EXCEP /* user exception */ -- --#define CONFIG_PREBOOT "echo U-BOOT for ${hostname};setenv preboot;echo" -- --#ifndef CONFIG_EXTRA_ENV_SETTINGS --#define CONFIG_EXTRA_ENV_SETTINGS "unlock=yes\0" \ -- "nor0=flash-0\0"\ -- "mtdparts=mtdparts=flash-0:"\ -- "256k(u-boot),256k(env),3m(kernel),"\ -- "1m(romfs),1m(cramfs),-(jffs2)\0"\ -- "nc=setenv stdout nc;"\ -- "setenv stdin nc\0" \ -- "serial=setenv stdout serial;"\ -- "setenv stdin serial\0" --#endif -- --/* Enable flat device tree support */ --#define CONFIG_LMB 1 -+#define CONFIG_SYS_USR_EXCEP /* user exception */ -+#define CONFIG_SYS_HZ 1000 -+ -+/* Boot Argument Buffer Size */ -+#define CONFIG_SYS_MAXARGS 32 /* max number of command args */ -+#define CONFIG_SYS_LONGHELP -+/* Initial memory map for Linux */ -+#define CONFIG_SYS_BOOTMAPSZ 0x8000000 -+ -+/* Environment settings*/ -+#define CONFIG_ENV_ADDR 0x60b80000 -+#define CONFIG_ENV_SIZE 0x20000 -+#define CONFIG_ENV_SECT_SIZE 0x20000 -+/* PREBOOT */ -+#define CONFIG_PREBOOT "echo U-BOOT for ${hostname};setenv preboot; echo; dhcp" -+ -+/* Extra U-Boot Env settings */ -+#define CONFIG_EXTRA_ENV_SETTINGS \ -+ SERIAL_MULTI \ -+ CONSOLE_ARG \ -+ ESERIAL0 \ -+ "nc=setenv stdout nc;setenv stdin nc;\0" \ -+ "ethaddr=00:0a:35:00:22:01\0" \ -+ "autoload=no\0" \ -+ "sdbootdev=0\0" \ -+ "clobstart=0x81000000\0" \ -+ "netstart=0x81000000\0" \ -+ "dtbnetstart=0x82800000\0" \ -+ "loadaddr=0x81000000\0" \ -+ "bootsize=0x80000\0" \ -+ "bootstart=0x60b00000\0" \ -+ "boot_img=u-boot-s.bin\0" \ -+ "load_boot=tftpboot ${clobstart} ${boot_img}\0" \ -+ "update_boot=setenv img boot; setenv psize ${bootsize}; setenv installcmd \"install_boot\"; run load_boot test_img; setenv img; setenv psize; setenv installcmd\0" \ -+ "install_boot=protect off ${bootstart} +${bootsize} && erase ${bootstart} +${bootsize} && " "cp.b ${clobstart} ${bootstart} ${filesize}\0" \ -+ "bootenvsize=0x20000\0" \ -+ "bootenvstart=0x60b80000\0" \ -+ "eraseenv=protect off ${bootenvstart} +${bootenvsize} && erase ${bootenvstart} +${bootenvsize}\0" \ -+ "kernelsize=0xc00000\0" \ -+ "kernelstart=0x60ba0000\0" \ -+ "kernel_img=image.ub\0" \ -+ "load_kernel=tftpboot ${clobstart} ${kernel_img}\0" \ -+ "update_kernel=setenv img kernel; setenv psize ${kernelsize}; setenv installcmd \"install_kernel\"; run load_kernel test_crc; setenv img; setenv psize; setenv installcmd\0" \ -+ "install_kernel=protect off ${kernelstart} +${kernelsize} && erase ${kernelstart} +${kernelsize} && " "cp.b ${clobstart} ${kernelstart} ${filesize}\0" \ -+ "cp_kernel2ram=cp.b ${kernelstart} ${netstart} ${kernelsize}\0" \ -+ "fpgasize=0xb00000\0" \ -+ "fpgastart=0x60000000\0" \ -+ "fpga_img=system.bit.bin\0" \ -+ "load_fpga=tftpboot ${clobstart} ${fpga_img}\0" \ -+ "update_fpga=setenv img fpga; setenv psize ${fpgasize}; setenv installcmd \"install_fpga\"; run load_fpga test_img; setenv img; setenv psize; setenv installcmd\0" \ -+ "install_fpga=protect off ${fpgastart} +${fpgasize} && erase ${fpgastart} +${fpgasize} && " "cp.b ${clobstart} ${fpgastart} ${filesize}\0" \ -+ "fault=echo ${img} image size is greater than allocated place - partition ${img} is NOT UPDATED\0" \ -+ "test_crc=if imi ${clobstart}; then run test_img; else echo ${img} Bad CRC - ${img} is NOT UPDATED; fi\0" \ -+ "test_img=setenv var \"if test ${filesize} -gt ${psize}\\; then run fault\\; else run ${installcmd}\\; fi\"; run var; setenv var\0" \ -+ "netboot=tftpboot ${netstart} ${kernel_img} && bootm\0" \ -+ "default_bootcmd=run cp_kernel2ram && bootm ${netstart}\0" \ -+"" -+/* BOOTCOMMAND */ -+#define CONFIG_BOOTCOMMAND "run default_bootcmd" - --#if defined(CONFIG_XILINX_AXIEMAC) --# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN 1 - #endif -- --/* SPL part */ -- --#ifdef CONFIG_SYS_FLASH_BASE --# define CONFIG_SYS_UBOOT_BASE CONFIG_SYS_FLASH_BASE --#endif -- --/* for booting directly linux */ -- --#define CONFIG_SYS_FDT_BASE (CONFIG_SYS_FLASH_BASE + \ -- 0x40000) --#define CONFIG_SYS_FDT_SIZE (16 << 10) --#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_TEXT_BASE + \ -- 0x1000000) -- --/* SP location before relocation, must use scratch RAM */ --/* BRAM start */ --#define CONFIG_SYS_INIT_RAM_ADDR 0x0 --/* BRAM size - will be generated */ --#define CONFIG_SYS_INIT_RAM_SIZE 0x100000 -- --# define CONFIG_SPL_STACK_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ -- CONFIG_SYS_INIT_RAM_SIZE - \ -- CONFIG_SYS_MALLOC_F_LEN) -- --/* Just for sure that there is a space for stack */ --#define CONFIG_SPL_STACK_SIZE 0x100 -- --#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE -- --#define CONFIG_SPL_MAX_FOOTPRINT (CONFIG_SYS_INIT_RAM_SIZE - \ -- CONFIG_SYS_INIT_RAM_ADDR - \ -- CONFIG_SYS_MALLOC_F_LEN - \ -- CONFIG_SPL_STACK_SIZE) -- --#endif /* __CONFIG_H */ --- -2.7.5 - diff --git a/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx_%.bbappend b/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx_%.bbappend new file mode 100644 index 00000000..23b1eb50 --- /dev/null +++ b/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx_%.bbappend @@ -0,0 +1,5 @@ +FILESEXTRAPATHS:prepend := "${THISDIR}/files:" + +SRC_URI:append:kc705-microblazeel = " \ + file://kc705-microblazeel.cfg \ + "
\ No newline at end of file diff --git a/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx_2019.1.bb b/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx_2019.1.bb deleted file mode 100644 index 3377635d..00000000 --- a/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx_2019.1.bb +++ /dev/null @@ -1,32 +0,0 @@ -UBOOT_VERSION = "v2019.01" -XILINX_RELEASE_VERSION = "v2019.1" - -UBRANCH ?= "master" - -SRCREV ?= "d895ac5e94815d4b45dcf09d4752c5c2334a51db" - -include u-boot-xlnx.inc -include u-boot-spl-zynq-init.inc - -SRC_URI_append_kc705-microblazeel = " file://microblaze-kc705-Convert-microblaze-generic-to-k.patch" - -LICENSE = "GPLv2+" -LIC_FILES_CHKSUM = "file://README;beginline=1;endline=4;md5=744e7e3bb0c94b4b9f6b3db3bf893897" - -# u-boot-xlnx has support for these -HAS_PLATFORM_INIT ?= " \ - zynq_microzed_config \ - zynq_zed_config \ - zynq_zc702_config \ - zynq_zc706_config \ - zynq_zybo_config \ - xilinx_zynqmp_zcu102_rev1_0_config \ - xilinx_zynqmp_zcu106_revA_config \ - xilinx_zynqmp_zcu104_revC_config \ - xilinx_zynqmp_zcu100_revC_config \ - xilinx_zynqmp_zcu111_revA_config \ - xilinx_zynqmp_zc1275_revA_config \ - xilinx_zynqmp_zc1275_revB_config \ - xilinx_zynqmp_zc1254_revA_config \ - " - diff --git a/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr.bb b/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr.bb deleted file mode 100644 index d2eedd58..00000000 --- a/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr.bb +++ /dev/null @@ -1,81 +0,0 @@ -SUMMARY = "U-boot boot scripts for Xilinx devices" -LICENSE = "MIT" -LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/MIT;md5=0835ade698e0bcf8506ecda2f7b4f302" - -DEPENDS = "u-boot-mkimage-native" - -inherit deploy nopackages - -INHIBIT_DEFAULT_DEPS = "1" - -COMPATIBLE_MACHINE ?= "^$" -COMPATIBLE_MACHINE_zynqmp = "zynqmp" -COMPATIBLE_MACHINE_zynq = "zynq" -COMPATIBLE_MACHINE_versal = "versal" - -KERNELDT = "${@os.path.basename(d.getVar('KERNEL_DEVICETREE').split(' ')[0]) if d.getVar('KERNEL_DEVICETREE') else ''}" -DEVICE_TREE_NAME ?= "${@bb.utils.contains('PREFERRED_PROVIDER_virtual/dtb', 'device-tree', 'system.dtb', d.getVar('KERNELDT'), d)}" -#Need to copy a rootfs.cpio.gz.u-boot as uramdisk.image.gz into boot partition -RAMDISK_IMAGE ?= "" -RAMDISK_IMAGE_zynq ?= "uramdisk.image.gz" - -KERNEL_BOOTCMD_zynqmp ?= "booti" -KERNEL_BOOTCMD_zynq ?= "bootm" -KERNEL_BOOTCMD_versal ?= "booti" - -BOOTMODE ?= "sd" -BOOTMODE_versal ?= "qspi" - -SRC_URI = " \ - file://boot.cmd.sd.zynq \ - file://boot.cmd.sd.zynqmp \ - file://boot.cmd.qspi.versal \ - file://pxeboot.pxe \ - " -PACKAGE_ARCH = "${MACHINE_ARCH}" - -UBOOTSCR_BASE_NAME ?= "${PN}-${PKGE}-${PKGV}-${PKGR}-${DATETIME}" -UBOOTSCR_BASE_NAME[vardepsexclude] = "DATETIME" -UBOOTPXE_CONFIG ?= "pxelinux.cfg" -UBOOTPXE_CONFIG_NAME = "${UBOOTPXE_CONFIG}-${DATETIME}" -UBOOTPXE_CONFIG_NAME[vardepsexclude] = "DATETIME" - -DEVICETREE_ADDRESS_zynqmp ?= "0x4000000" -DEVICETREE_ADDRESS_zynq ?= "0x2000000" -DEVICETREE_ADDRESS_versal ?= "0x1000" -KERNEL_LOAD_ADDRESS_zynqmp ?= "0x80000" -KERNEL_LOAD_ADDRESS_zynq ?= "0x2080000" -KERNEL_LOAD_ADDRESS_versal ?= "0x80000" - -RAMDISK_IMAGE_ADDRESS_zynq ?= "0x4000000" -RAMDISK_IMAGE_ADDRESS_versal ?= "0x6000000" - -do_configure[noexec] = "1" -do_install[noexec] = "1" - -do_compile() { - sed -e 's/@@KERNEL_IMAGETYPE@@/${KERNEL_IMAGETYPE}/' \ - -e 's/@@KERNEL_LOAD_ADDRESS@@/${KERNEL_LOAD_ADDRESS}/' \ - -e 's/@@DEVICE_TREE_NAME@@/${DEVICE_TREE_NAME}/' \ - -e 's/@@DEVICETREE_ADDRESS@@/${DEVICETREE_ADDRESS}/' \ - -e 's/@@RAMDISK_IMAGE@@/${RAMDISK_IMAGE}/' \ - -e 's/@@RAMDISK_IMAGE_ADDRESS@@/${RAMDISK_IMAGE_ADDRESS}/' \ - -e 's/@@KERNEL_BOOTCMD@@/${KERNEL_BOOTCMD}/' \ - "${WORKDIR}/boot.cmd.${BOOTMODE}.${SOC_FAMILY}" > "${WORKDIR}/boot.cmd" - mkimage -A arm -T script -C none -n "Boot script" -d "${WORKDIR}/boot.cmd" boot.scr - sed -e 's/@@KERNEL_IMAGETYPE@@/${KERNEL_IMAGETYPE}/' \ - -e 's/@@DEVICE_TREE_NAME@@/${DEVICE_TREE_NAME}/' \ - "${WORKDIR}/pxeboot.pxe" > "pxeboot.pxe" -} - - -do_deploy() { - install -d ${DEPLOYDIR} - install -m 0644 boot.scr ${DEPLOYDIR}/${UBOOTSCR_BASE_NAME}.scr - ln -sf ${UBOOTSCR_BASE_NAME}.scr ${DEPLOYDIR}/boot.scr - install -d ${DEPLOYDIR}/pxeboot/${UBOOTPXE_CONFIG_NAME} - install -m 0644 pxeboot.pxe ${DEPLOYDIR}/pxeboot/${UBOOTPXE_CONFIG_NAME}/default - ln -sf pxeboot/${UBOOTPXE_CONFIG_NAME} ${DEPLOYDIR}/${UBOOTPXE_CONFIG} -} - -addtask do_deploy after do_compile before do_build diff --git a/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr/boot.cmd.qspi b/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr/boot.cmd.qspi deleted file mode 100644 index 84a25d29..00000000 --- a/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr/boot.cmd.qspi +++ /dev/null @@ -1 +0,0 @@ -booti 0x80000 0x6000000 0x1000 diff --git a/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr/boot.cmd.qspi.versal b/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr/boot.cmd.qspi.versal deleted file mode 100644 index d56b7c8c..00000000 --- a/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr/boot.cmd.qspi.versal +++ /dev/null @@ -1 +0,0 @@ -@@KERNEL_BOOTCMD@@ @@KERNEL_LOAD_ADDRESS@@ @@RAMDISK_IMAGE_ADDRESS@@ @@DEVICETREE_ADDRESS@@ diff --git a/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr/boot.cmd.sd b/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr/boot.cmd.sd deleted file mode 100644 index 67a8057b..00000000 --- a/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr/boot.cmd.sd +++ /dev/null @@ -1,6 +0,0 @@ -setenv bootargs $bootargs root=/dev/mmcblk0p2 rw rootwait earlycon clk_ignore_unused -devicetree_image=@@DEVICE_TREE_NAME@@ -fatload mmc 0 ${fdt_addr_r} ${devicetree_image} -fatload mmc $sdbootdev:$partid ${kernel_addr_r} @@KERNEL_IMAGETYPE@@ -booti ${kernel_addr_r} - ${fdt_addr_r} - diff --git a/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr/boot.cmd.sd.zynq b/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr/boot.cmd.sd.zynq deleted file mode 100644 index f593ab4a..00000000 --- a/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr/boot.cmd.sd.zynq +++ /dev/null @@ -1,4 +0,0 @@ -fatload mmc 0 @@DEVICETREE_ADDRESS@@ @@DEVICE_TREE_NAME@@ -fatload mmc 0 @@KERNEL_LOAD_ADDRESS@@ @@KERNEL_IMAGETYPE@@ -fatload mmc 0 @@RAMDISK_IMAGE_ADDRESS@@ @@RAMDISK_IMAGE@@ -@@KERNEL_BOOTCMD@@ @@KERNEL_LOAD_ADDRESS@@ @@RAMDISK_IMAGE_ADDRESS@@ @@DEVICETREE_ADDRESS@@ diff --git a/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr/boot.cmd.sd.zynqmp b/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr/boot.cmd.sd.zynqmp deleted file mode 100644 index 18f82d78..00000000 --- a/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr/boot.cmd.sd.zynqmp +++ /dev/null @@ -1,4 +0,0 @@ -setenv bootargs $bootargs root=/dev/mmcblk0p2 rw rootwait earlycon clk_ignore_unused -fatload mmc 0 @@DEVICETREE_ADDRESS@@ @@DEVICE_TREE_NAME@@ -fatload mmc $sdbootdev:$partid @@KERNEL_LOAD_ADDRESS@@ @@KERNEL_IMAGETYPE@@ -@@KERNEL_BOOTCMD@@ @@KERNEL_LOAD_ADDRESS@@ - @@DEVICETREE_ADDRESS@@ diff --git a/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr/pxeboot.pxe b/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr/pxeboot.pxe deleted file mode 100644 index 6d7a0a94..00000000 --- a/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr/pxeboot.pxe +++ /dev/null @@ -1,3 +0,0 @@ -LABEL Linux -KERNEL @@KERNEL_IMAGETYPE@@ -FDT @@DEVICE_TREE_NAME@@ diff --git a/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-uenv.bb b/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-uenv.bb deleted file mode 100644 index 952077d1..00000000 --- a/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-uenv.bb +++ /dev/null @@ -1,101 +0,0 @@ -SUMMARY = "U-Boot uEnv.txt SD boot environment generation for Zynq targets" -LICENSE = "MIT" -LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/MIT;md5=0835ade698e0bcf8506ecda2f7b4f302" - -INHIBIT_DEFAULT_DEPS = "1" -PACKAGE_ARCH = "${MACHINE_ARCH}" - -python () { - # The device trees must be populated in the deploy directory to correctly - # detect them and their names. This means that this recipe needs to depend - # on those deployables just like the image recipe does. - deploydeps = ["virtual/kernel"] - for i in (d.getVar("MACHINE_ESSENTIAL_EXTRA_RDEPENDS") or "").split(): - if i != d.getVar("BPN"): - deploydeps.append(i) - for i in (d.getVar("EXTRA_IMAGEDEPENDS") or "").split(): - if i != d.getVar("BPN"): - deploydeps.append(i) - - # add as DEPENDS since the targets might not have do_deploy tasks - if len(deploydeps) != 0: - d.appendVar("DEPENDS", " " + " ".join(deploydeps)) -} - -COMPATIBLE_MACHINE = "^$" -COMPATIBLE_MACHINE_zynq = ".*" -COMPATIBLE_MACHINE_zynqmp = ".*" - -inherit deploy image-wic-utils - -def uboot_boot_cmd(d): - if d.getVar("KERNEL_IMAGETYPE") in ["uImage", "fitImage"]: - return "bootm" - if d.getVar("KERNEL_IMAGETYPE") in ["zImage"]: - return "bootz" - if d.getVar("KERNEL_IMAGETYPE") in ["Image"]: - return "booti" - raise bb.parse.SkipRecipe("Unsupport kernel image type") - -def uenv_populate(d): - # populate the environment values - env = {} - - env["machine_name"] = d.getVar("MACHINE") - - env["kernel_image"] = d.getVar("KERNEL_IMAGETYPE") - env["kernel_load_address"] = d.getVar("KERNEL_LOAD_ADDRESS") - - env["devicetree_image"] = boot_files_dtb_filepath(d) - env["devicetree_load_address"] = d.getVar("DEVICETREE_LOAD_ADDRESS") - - env["bootargs"] = d.getVar("KERNEL_BOOTARGS") - - env["loadkernel"] = "fatload mmc 0 ${kernel_load_address} ${kernel_image}" - env["loaddtb"] = "fatload mmc 0 ${devicetree_load_address} ${devicetree_image}" - env["bootkernel"] = "run loadkernel && run loaddtb && " + uboot_boot_cmd(d) + " ${kernel_load_address} - ${devicetree_load_address}" - - # default uenvcmd does not load bitstream - env["uenvcmd"] = "run bootkernel" - - bitstream, bitstreamtype = boot_files_bitstream(d) - if bitstream: - env["bitstream_image"] = bitstream - env["bitstream_load_address"] = "0x100000" - - # if bitstream is "bit" format use loadb, otherwise use load - env["bitstream_type"] = "loadb" if bitstreamtype else "load" - - # load bitstream first with loadfpa - env["loadfpga"] = "fatload mmc 0 ${bitstream_load_address} ${bitstream_image} && fpga ${bitstream_type} 0 ${bitstream_load_address} ${filesize}" - env["uenvcmd"] = "run loadfpga && run bootkernel" - - return env - -# bootargs, default to booting with the rootfs device being partition 2 of the first mmc device -KERNEL_BOOTARGS_zynq = "earlyprintk console=ttyPS0,115200 root=/dev/mmcblk0p2 rw rootwait" -KERNEL_BOOTARGS_zynqmp = "earlycon clk_ignore_unused root=/dev/mmcblk0p2 rw rootwait" - -KERNEL_LOAD_ADDRESS_zynq = "0x2080000" -KERNEL_LOAD_ADDRESS_zynqmp = "0x80000" -DEVICETREE_LOAD_ADDRESS_zynq = "0x2000000" -DEVICETREE_LOAD_ADDRESS_zynqmp = "0x4000000" - -python do_compile() { - env = uenv_populate(d) - with open(d.expand("${WORKDIR}/uEnv.txt"), "w") as f: - for k, v in env.items(): - f.write("{0}={1}\n".format(k, v)) -} - -FILES_${PN} += "/boot/uEnv.txt" - -do_install() { - install -Dm 0644 ${WORKDIR}/uEnv.txt ${D}/boot/uEnv.txt -} - -do_deploy() { - install -Dm 0644 ${WORKDIR}/uEnv.txt ${DEPLOYDIR}/uEnv.txt -} -addtask do_deploy after do_compile before do_build - diff --git a/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot_%.bbappend b/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot_%.bbappend deleted file mode 100644 index b8522369..00000000 --- a/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot_%.bbappend +++ /dev/null @@ -1,11 +0,0 @@ -include u-boot-spl-zynq-init.inc - -# u-boot 2016.11 has support for these -HAS_PLATFORM_INIT ??= " \ - zynq_microzed_config \ - zynq_zed_config \ - zynq_zc702_config \ - zynq_zc706_config \ - zynq_zybo_config \ - " - diff --git a/meta-xilinx-bsp/recipes-devtools/qemu/files/0001-linux-user-disable-qemu-bridge-helper-and-socket_scm.patch b/meta-xilinx-bsp/recipes-devtools/qemu/files/0001-linux-user-disable-qemu-bridge-helper-and-socket_scm.patch deleted file mode 100644 index 8f41f746..00000000 --- a/meta-xilinx-bsp/recipes-devtools/qemu/files/0001-linux-user-disable-qemu-bridge-helper-and-socket_scm.patch +++ /dev/null @@ -1,56 +0,0 @@ -From 206d1b9c38daed50fcc08d2e743e649fbb82d60b Mon Sep 17 00:00:00 2001 -From: Laurent Vivier <laurent@vivier.eu> -Date: Tue, 5 Jun 2018 18:09:58 +0200 -Subject: [PATCH] linux-user: disable qemu-bridge-helper and socket_scm_helper - build - -linux-user targets don't need them, and if we ask to build statically -linked binaries, some static libraries they need are not available. - -Signed-off-by: Laurent Vivier <laurent@vivier.eu> -Reviewed-by: Peter Maydell <peter.maydell@linaro.org> -Message-Id: <20180605160958.5434-1-laurent@vivier.eu> - -Upstream-Status: Pending - - -With the split of qemu-xilinx into target,native and system-native recipes, -we need to avoid duplicating providers for qemu-brigde-helper. - -Signed-off-by: Alejandro Enedino Hernandez Samaniego <alejandr@xilinx.com> - - ---- - Makefile | 2 +- - tests/Makefile.include | 2 +- - 2 files changed, 2 insertions(+), 2 deletions(-) - -diff --git a/Makefile b/Makefile -index 023b343..e4bc34a 100644 ---- a/Makefile -+++ b/Makefile -@@ -351,7 +351,7 @@ $(call set-vpath, $(SRC_PATH)) - - LIBS+=-lz $(LIBS_TOOLS) - --HELPERS-$(CONFIG_LINUX) = qemu-bridge-helper$(EXESUF) -+HELPERS-$(call land,$(CONFIG_SOFTMMU),$(CONFIG_LINUX)) = qemu-bridge-helper$(EXESUF) - - ifdef BUILD_DOCS - DOCS=qemu-doc.html qemu-doc.txt qemu.1 qemu-img.1 qemu-nbd.8 qemu-ga.8 -diff --git a/tests/Makefile.include b/tests/Makefile.include -index d098a10..10397ed 100644 ---- a/tests/Makefile.include -+++ b/tests/Makefile.include -@@ -930,7 +930,7 @@ check-report.html: check-report.xml - - # Other tests - --QEMU_IOTESTS_HELPERS-$(CONFIG_LINUX) = tests/qemu-iotests/socket_scm_helper$(EXESUF) -+QEMU_IOTESTS_HELPERS-$(call land,$(CONFIG_SOFTMMU),$(CONFIG_LINUX)) = tests/qemu-iotests/socket_scm_helper$(EXESUF) - - .PHONY: check-tests/qemu-iotests-quick.sh - check-tests/qemu-iotests-quick.sh: tests/qemu-iotests-quick.sh qemu-img$(EXESUF) qemu-io$(EXESUF) $(QEMU_IOTESTS_HELPERS-y) --- -2.7.4 - diff --git a/meta-xilinx-bsp/recipes-devtools/qemu/files/qemu-system-aarch64-multiarch b/meta-xilinx-bsp/recipes-devtools/qemu/files/qemu-system-aarch64-multiarch deleted file mode 100644 index ba0e2743..00000000 --- a/meta-xilinx-bsp/recipes-devtools/qemu/files/qemu-system-aarch64-multiarch +++ /dev/null @@ -1,67 +0,0 @@ -#!/usr/bin/env python3 - -# Xilinx QEMU wrapper to launch both PMU and APU instances (multiarch) -import os -import subprocess -import sys -import tempfile -import shutil - -binpath = os.path.dirname(os.path.abspath(__file__)) -mach_path = tempfile.mkdtemp() - - -# Separate PMU and APU arguments -APU_args = sys.argv[1:] -mbtype='' - -if '-pmu-args' in APU_args: - MB_args = APU_args[APU_args.index('-pmu-args')+1] - APU_args.remove('-pmu-args') - APU_args.remove(MB_args) - MB_args = MB_args.split() - PMU_rom = MB_args[MB_args.index('-kernel')+1] - mbtype='PMU' -elif '-plm-args' in APU_args: - MB_args = APU_args[APU_args.index('-plm-args')+1] - APU_args.remove('-plm-args') - APU_args.remove(MB_args) - MB_args = MB_args.split() - mbtype='PLM' -else: - error_msg = '\nMultiarch not setup properly.' - sys.exit(error_msg) - -error_msg = None -if (mbtype == 'PMU' and os.path.exists(PMU_rom)) or mbtype == 'PLM': - - # We need to switch tcp serial arguments (if they exist, e.g. qemurunner) to get the output correctly - tcp_serial_ports = [i for i, s in enumerate(APU_args) if 'tcp:127.0.0.1:' in s] - - # We can only switch these if there are exactly two, otherwise we can't assume what is being executed so we leave it as is - if len(tcp_serial_ports) == 2: - APU_args[tcp_serial_ports[0]],APU_args[tcp_serial_ports[1]] = APU_args[tcp_serial_ports[1]],APU_args[tcp_serial_ports[0]] - - mb_cmd = binpath + '/qemu-system-microblazeel ' + ' '.join(MB_args) + ' -machine-path ' + mach_path - apu_cmd = binpath + '/qemu-system-aarch64 ' + ' '.join(APU_args) + ' -machine-path ' + mach_path - - # Debug prints - print('\n%s instance cmd: %s\n' % (mbtype, mb_cmd)) - print('APU instance cmd: %s\n' % apu_cmd) - - - # Invoke QEMU pmu instance - process_pmu = subprocess.Popen(mb_cmd, shell=True, stderr=subprocess.PIPE) - - # Invoke QEMU APU instance - process_apu = subprocess.Popen(apu_cmd, shell=True, stderr=subprocess.PIPE) - if process_apu.wait(): - error_msg = '\nQEMU APU instance failed:\n%s' % process_apu.stderr.read().decode() - -else: - if mbtype == 'PMU': - error_msg = '\nError: Missing PMU ROM: %s' % PMU_rom - error_msg += '\nSee "meta-xilinx/README.qemu.md" for more information on accquiring the PMU ROM.\n' - -shutil.rmtree(mach_path) -sys.exit(error_msg) diff --git a/meta-xilinx-bsp/recipes-devtools/qemu/qemu-devicetrees.inc b/meta-xilinx-bsp/recipes-devtools/qemu/qemu-devicetrees.inc deleted file mode 100644 index d4044ed7..00000000 --- a/meta-xilinx-bsp/recipes-devtools/qemu/qemu-devicetrees.inc +++ /dev/null @@ -1,37 +0,0 @@ -SUMMARY = "Xilinx's hardware device trees required for QEMU" -HOMEPAGE = "https://github.com/xilinx/qemu-devicetrees/" -LICENSE = "BSD" -DEPENDS += "dtc-native" - -inherit deploy - -LIC_FILES_CHKSUM = "file://Makefile;beginline=1;endline=27;md5=7348b6cbcae69912cb1dee68d6c68d99" - -PV = "xilinx-${XILINX_RELEASE_VERSION}+git${SRCPV}" - -BRANCH ?= "" -REPO ?= "git://github.com/Xilinx/qemu-devicetrees.git;protocol=https" - -BRANCHARG = "${@['nobranch=1', 'branch=${BRANCH}'][d.getVar('BRANCH', True) != '']}" -SRC_URI = "${REPO};${BRANCHARG}" - -S = "${WORKDIR}/git" - -# Don't need to do anything -do_install() { - : -} - -do_deploy() { - # single-arch dtbs - for DTS_FILE in ${S}/LATEST/SINGLE_ARCH/*.dtb; do - install -Dm 0644 $DTS_FILE ${DEPLOYDIR}/qemu-hw-devicetrees/$(basename $DTS_FILE .dtb).dtb - done - - # multi-arch dtbs - for DTS_FILE in ${S}/LATEST/MULTI_ARCH/*.dtb; do - install -Dm 0644 $DTS_FILE ${DEPLOYDIR}/qemu-hw-devicetrees/multiarch/$(basename $DTS_FILE .dtb).dtb - done -} - -addtask deploy after do_install diff --git a/meta-xilinx-bsp/recipes-devtools/qemu/qemu-devicetrees_2019.1.bb b/meta-xilinx-bsp/recipes-devtools/qemu/qemu-devicetrees_2019.1.bb deleted file mode 100644 index 06481660..00000000 --- a/meta-xilinx-bsp/recipes-devtools/qemu/qemu-devicetrees_2019.1.bb +++ /dev/null @@ -1,6 +0,0 @@ -require qemu-devicetrees.inc - -XILINX_RELEASE_VERSION = "v2019.1" - -BRANCH ?= "branch/xilinx-v2019.1" -SRCREV ?= "445406ef4d06303f00387f7d81e8718255336fd0" diff --git a/meta-xilinx-bsp/recipes-devtools/qemu/qemu-xilinx-helper-native_1.0.bb b/meta-xilinx-bsp/recipes-devtools/qemu/qemu-xilinx-helper-native_1.0.bb deleted file mode 100644 index ecc96521..00000000 --- a/meta-xilinx-bsp/recipes-devtools/qemu/qemu-xilinx-helper-native_1.0.bb +++ /dev/null @@ -1,30 +0,0 @@ - -python () { - if d.getVar("PREFERRED_PROVIDER_qemu-helper-native") != d.getVar("PN"): - raise bb.parse.SkipRecipe("Set qemu-helper-native provider to use this recipe") -} - -def get_filespath_extra(d, subpath): - metaroot = next((p for p in d.getVar('BBPATH').split(':') if os.path.basename(p) == 'meta'), None) - if metaroot: - return os.path.join(metaroot, subpath) + ":" - return "" - -# TODO: improve this, since it is very hacky that this recipe need to build tunctl. -# include the existing qemu-helper-native -require recipes-devtools/qemu/qemu-helper-native_1.0.bb -# get the path to tunctl.c -FILESEXTRAPATHS_prepend := "${@get_filespath_extra(d, 'recipes-devtools/qemu/qemu-helper')}" - -# provide it, to replace the existing -PROVIDES += "qemu-helper-native" - -# replace qemu with qemu-xilinx -DEPENDS_remove = "qemu-system-native" -DEPENDS_append = " \ - qemu-xilinx-system-native \ - qemu-xilinx-multiarch-helper-native \ - " - -RDEPENDS_${PN}_remove = "qemu-system-native" -RDEPENDS_${PN}_append = " qemu-xilinx-system-native" diff --git a/meta-xilinx-bsp/recipes-devtools/qemu/qemu-xilinx-multiarch-helper-native_1.0.bb b/meta-xilinx-bsp/recipes-devtools/qemu/qemu-xilinx-multiarch-helper-native_1.0.bb deleted file mode 100644 index a9b11c6c..00000000 --- a/meta-xilinx-bsp/recipes-devtools/qemu/qemu-xilinx-multiarch-helper-native_1.0.bb +++ /dev/null @@ -1,20 +0,0 @@ -SUMMARY = "Helper scripts for executing a multi-arch instance of Xilinx QEMU" -LICENSE = "MIT" -LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/MIT;md5=0835ade698e0bcf8506ecda2f7b4f302" -RDEPENDS_${PN} = "qemu-xilinx-native" - -inherit native - -FILESEXTRAPATHS_prepend := "${THISDIR}/files:" - -SRC_URI = "file://qemu-system-aarch64-multiarch" - -do_configure[noexec] = "1" -do_compile[noexec] = "1" - -SYSROOT_DIRS += "${bindir}/qemu-xilinx" - -do_install() { - install -Dm 0755 ${WORKDIR}/qemu-system-aarch64-multiarch ${D}${bindir}/qemu-xilinx/qemu-system-aarch64-multiarch -} - diff --git a/meta-xilinx-bsp/recipes-devtools/qemu/qemu-xilinx-native.inc b/meta-xilinx-bsp/recipes-devtools/qemu/qemu-xilinx-native.inc deleted file mode 100644 index aae607f5..00000000 --- a/meta-xilinx-bsp/recipes-devtools/qemu/qemu-xilinx-native.inc +++ /dev/null @@ -1,7 +0,0 @@ -require recipes-devtools/qemu/qemu-native.inc -require qemu-xilinx.inc - -DEPENDS = "glib-2.0-native zlib-native" - -SRC_URI_remove = "file://0012-fix-libcap-header-issue-on-some-distro.patch" -SRC_URI_remove = "file://0013-cpus.c-Add-error-messages-when-qemi_cpu_kick_thread-.patch"
\ No newline at end of file diff --git a/meta-xilinx-bsp/recipes-devtools/qemu/qemu-xilinx-native_2019.1.bb b/meta-xilinx-bsp/recipes-devtools/qemu/qemu-xilinx-native_2019.1.bb deleted file mode 100644 index bc5a3850..00000000 --- a/meta-xilinx-bsp/recipes-devtools/qemu/qemu-xilinx-native_2019.1.bb +++ /dev/null @@ -1,7 +0,0 @@ -require qemu-xilinx-native.inc -BPN = "qemu-xilinx" - -EXTRA_OECONF_append = " --target-list=${@get_qemu_usermode_target_list(d)} --disable-tools --disable-blobs --disable-guest-agent" - - -SRC_URI_append = "file://0001-linux-user-disable-qemu-bridge-helper-and-socket_scm.patch" diff --git a/meta-xilinx-bsp/recipes-devtools/qemu/qemu-xilinx-system-native_2019.1.bb b/meta-xilinx-bsp/recipes-devtools/qemu/qemu-xilinx-system-native_2019.1.bb deleted file mode 100644 index a138704e..00000000 --- a/meta-xilinx-bsp/recipes-devtools/qemu/qemu-xilinx-system-native_2019.1.bb +++ /dev/null @@ -1,16 +0,0 @@ -require qemu-xilinx-native.inc - -EXTRA_OECONF_append = " --target-list=${@get_qemu_system_target_list(d)}" - -PACKAGECONFIG ??= "fdt alsa kvm" - -PACKAGECONFIG_remove = "${@'kvm' if not os.path.exists('/usr/include/linux/kvm.h') else ''}" - -DEPENDS += "pixman-native qemu-xilinx-native" - -do_install_append() { - # The following is also installed by qemu-native - rm -f ${D}${datadir}/${BPN}/trace-events-all - rm -rf ${D}${datadir}/${BPN}/keymaps -} - diff --git a/meta-xilinx-bsp/recipes-devtools/qemu/qemu-xilinx.inc b/meta-xilinx-bsp/recipes-devtools/qemu/qemu-xilinx.inc deleted file mode 100644 index ad44f098..00000000 --- a/meta-xilinx-bsp/recipes-devtools/qemu/qemu-xilinx.inc +++ /dev/null @@ -1,53 +0,0 @@ -SUMMARY = "Xilinx's fork of a fast open source processor emulator" -HOMEPAGE = "https://github.com/xilinx/qemu/" - -QEMU_TARGETS = "aarch64 arm microblaze microblazeel" - -XILINX_RELEASE_VERSION = "v2019.1" -XILINX_QEMU_VERSION ?= "v2.11.1" -BRANCH ?= "branch/xilinx-v2019.1" -SRCREV ?= "5f38ea92fb697b94ad43f01fe162f3ed6e6b0e16" - - -LIC_FILES_CHKSUM = " \ - file://COPYING;md5=441c28d2cf86e15a37fa47e15a72fbac \ - file://COPYING.LIB;endline=24;md5=c04def7ae38850e7d3ef548588159913 \ - " -DEPENDS = "glib-2.0 zlib pixman" - -FILESEXTRAPATHS_prepend := "${THISDIR}/files:" - -PV = "${XILINX_QEMU_VERSION}-xilinx-${XILINX_RELEASE_VERSION}+git${SRCPV}" -BRANCH ?= "" -REPO ?= "git://github.com/Xilinx/qemu.git;protocol=https" - -BRANCHARG = "${@['nobranch=1', 'branch=${BRANCH}'][d.getVar('BRANCH', True) != '']}" -SRC_URI = "${REPO};${BRANCHARG}" - -S = "${WORKDIR}/git" - -# Disable KVM completely -PACKAGECONFIG_remove = "kvm" - -# Enable libgcrypt -PACKAGECONFIG_append = " gcrypt" - -DISABLE_STATIC_pn-${PN} = "" - -PTEST_ENABLED = "" - -# append a suffix dir, to allow multiple versions of QEMU to be installed -EXTRA_OECONF_append = " \ - --bindir=${bindir}/qemu-xilinx \ - --libexecdir=${libexecdir}/qemu-xilinx \ - " - -do_configure_prepend() { - # rewrite usage of 'libgcrypt-config' with 'pkg-config libgcrypt' - sed -r -i 's/libgcrypt-config(\s*--)/pkg-config libgcrypt\1/g' ${S}/configure -} - -do_install_append() { - # Prevent QA warnings about installed ${localstatedir}/run - if [ -d ${D}${localstatedir}/run ]; then rmdir ${D}${localstatedir}/run; fi -}
\ No newline at end of file diff --git a/meta-xilinx-bsp/recipes-devtools/qemu/qemu-xilinx_2019.1.bb b/meta-xilinx-bsp/recipes-devtools/qemu/qemu-xilinx_2019.1.bb deleted file mode 100644 index c158b185..00000000 --- a/meta-xilinx-bsp/recipes-devtools/qemu/qemu-xilinx_2019.1.bb +++ /dev/null @@ -1,13 +0,0 @@ -require recipes-devtools/qemu/qemu.inc -require qemu-xilinx.inc - -BBCLASSEXTEND = "nativesdk" - -RDEPENDS_${PN}_class-target += "bash" - -EXTRA_OECONF_append_class-target = " --target-list=${@get_qemu_target_list(d)}" -EXTRA_OECONF_append_class-nativesdk = " --target-list=${@get_qemu_target_list(d)}" - -do_install_append_class-nativesdk() { - ${@bb.utils.contains('PACKAGECONFIG', 'gtk+', 'make_qemu_wrapper', '', d)} -} diff --git a/meta-xilinx-bsp/recipes-graphics/libgles/files/egl.pc b/meta-xilinx-bsp/recipes-graphics/libgles/files/egl.pc deleted file mode 100644 index f9935f25..00000000 --- a/meta-xilinx-bsp/recipes-graphics/libgles/files/egl.pc +++ /dev/null @@ -1,12 +0,0 @@ -prefix=/usr -exec_prefix=${prefix} -libdir=/usr/lib -includedir=/usr/include - -Name: egl -Description: MALI EGL library -Requires.private: -Version: r8p0 -Libs: -L${libdir} -lEGL -Libs.private: -lm -lpthread -ldl -Cflags: -I${includedir} diff --git a/meta-xilinx-bsp/recipes-graphics/libgles/files/gbm.pc b/meta-xilinx-bsp/recipes-graphics/libgles/files/gbm.pc deleted file mode 100644 index 02ea94e6..00000000 --- a/meta-xilinx-bsp/recipes-graphics/libgles/files/gbm.pc +++ /dev/null @@ -1,12 +0,0 @@ -prefix=/usr -exec_prefix=${prefix} -libdir=/usr/lib -includedir=/usr/include - -Name: gbm -Description: MALI gbm library -Requires.private: -Version: r8p0 -Libs: -L${libdir} -lgbm -Libs.private: -lm -lpthread -ldl -Cflags: -I${includedir} diff --git a/meta-xilinx-bsp/recipes-graphics/libgles/files/glesv1.pc b/meta-xilinx-bsp/recipes-graphics/libgles/files/glesv1.pc deleted file mode 100644 index 48954007..00000000 --- a/meta-xilinx-bsp/recipes-graphics/libgles/files/glesv1.pc +++ /dev/null @@ -1,12 +0,0 @@ -prefix=/usr -exec_prefix=${prefix} -libdir=/usr/lib -includedir=/usr/include - -Name: glesv1 -Description: MALI OpenGL ES 1.1 library -Requires.private: -Version: r8p0 -Libs: -L${libdir} -lGLESv1_CM -Libs.private: -lm -lpthread -ldl -Cflags: -I${includedir} diff --git a/meta-xilinx-bsp/recipes-graphics/libgles/files/glesv1_cm.pc b/meta-xilinx-bsp/recipes-graphics/libgles/files/glesv1_cm.pc deleted file mode 100644 index 888af87e..00000000 --- a/meta-xilinx-bsp/recipes-graphics/libgles/files/glesv1_cm.pc +++ /dev/null @@ -1,12 +0,0 @@ -prefix=/usr -exec_prefix=${prefix} -libdir=/usr/lib -includedir=/usr/include - -Name: gles_cm -Description: Mali OpenGL ES 1.1 CM library -Requires.private: -Version: r8p0 -Libs: -L${libdir} -lGLESv1_CM -Libs.private: -lm -lpthread -ldl -Cflags: -I${includedir} diff --git a/meta-xilinx-bsp/recipes-graphics/libgles/files/glesv2.pc b/meta-xilinx-bsp/recipes-graphics/libgles/files/glesv2.pc deleted file mode 100644 index 5047c394..00000000 --- a/meta-xilinx-bsp/recipes-graphics/libgles/files/glesv2.pc +++ /dev/null @@ -1,12 +0,0 @@ -prefix=/usr -exec_prefix=${prefix} -libdir=/usr/lib -includedir=/usr/include - -Name: glesv2 -Description: MALI OpenGL ES 2.0 library -Requires.private: -Version: r8p0 -Libs: -L${libdir} -lGLESv2 -Libs.private: -lm -lpthread -ldl -Cflags: -I${includedir} diff --git a/meta-xilinx-bsp/recipes-graphics/libgles/files/wayland-egl.pc b/meta-xilinx-bsp/recipes-graphics/libgles/files/wayland-egl.pc deleted file mode 100644 index 719fb3e4..00000000 --- a/meta-xilinx-bsp/recipes-graphics/libgles/files/wayland-egl.pc +++ /dev/null @@ -1,12 +0,0 @@ -prefix=/usr -exec_prefix=${prefix} -libdir=/usr/lib -includedir=/usr/include - -Name: wayland-egl -Description: MALI wayland-egl library -Requires.private: -Version: r8p0 -Libs: -L${libdir} -lwayland-egl -Libs.private: -lm -lpthread -ldl -Cflags: -I${includedir} diff --git a/meta-xilinx-bsp/recipes-graphics/libgles/libmali-xlnx.bb b/meta-xilinx-bsp/recipes-graphics/libgles/libmali-xlnx.bb deleted file mode 100644 index 113710e3..00000000 --- a/meta-xilinx-bsp/recipes-graphics/libgles/libmali-xlnx.bb +++ /dev/null @@ -1,132 +0,0 @@ -DESCRIPTION = "libGLES for ZynqMP with Mali 400" - -LICENSE = "Proprietary" -LICENSE_FLAGS = "xilinx" -LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/Proprietary;md5=0557f9d92cf58f2ccdd50f62f8ac0b28" - -inherit distro_features_check -inherit xilinx-fetch-restricted - -ANY_OF_DISTRO_FEATURES = "fbdev x11" - -PROVIDES += "virtual/libgles1 virtual/libgles2 virtual/egl virtual/libgbm" - -FILESEXTRAPATHS_append := " \ - ${THISDIR}/files: \ - ${THISDIR}/r8p0-00rel0: " - - -# Fetch the MALI 400 binaries from here -# https://www.xilinx.com/member/forms/download/mali-driver-license.html?filename=mali-400-userspace.tar - -PV = "r8p0-01rel0" -SRC_URI = " \ - https://www.xilinx.com/member/forms/download/mali-driver-license.html?filename=mali-400-userspace.tar;downloadfilename=mali-400-userspace.tar \ - file://egl.pc \ - file://glesv1_cm.pc \ - file://glesv1.pc \ - file://glesv2.pc \ - file://wayland-egl.pc \ - file://gbm.pc \ - " - -SRC_URI[md5sum] = "4fd3456564ef8c818e21432221c9e1b7" -SRC_URI[sha256sum] = "26d473ae77c36104a215710beca55a22a712850dc26547dde950c7398210602c" - -COMPATIBLE_MACHINE = "^$" -COMPATIBLE_MACHINE_zynqmpeg = "zynqmpeg" -COMPATIBLE_MACHINE_zynqmpev = "zynqmpev" - -PACKAGE_ARCH = "${SOC_FAMILY}" - - -S = "${WORKDIR}/mali-400" - -X11RDEPENDS = "libxdamage libxext libx11 libdrm libxfixes" -X11DEPENDS = "libxdamage libxext virtual/libx11 libdrm libxfixes" - -RDEPENDS_${PN} = " \ - kernel-module-mali \ - ${@bb.utils.contains('DISTRO_FEATURES', 'x11', '${X11RDEPENDS}', '', d)} \ - " - -DEPENDS = "\ - ${@bb.utils.contains('DISTRO_FEATURES', 'x11', '${X11DEPENDS}', '', d)} \ - ${@bb.utils.contains('DISTRO_FEATURES', 'wayland', 'wayland libdrm', '', d)} \ - " - -USE_X11 = "${@bb.utils.contains("DISTRO_FEATURES", "x11", "yes", "no", d)}" -USE_FB = "${@bb.utils.contains("DISTRO_FEATURES", "fbdev", "yes", "no", d)}" -USE_WL = "${@bb.utils.contains("DISTRO_FEATURES", "wayland", "yes", "no", d)}" - -do_compile() { - # Extract the MALI binaries into workdir - tar -xf ${WORKDIR}/mali/rel-v2018.3/r8p0-01rel0.tar -C ${S} -} - -do_install() { - #Identify the ARCH type - ${TARGET_PREFIX}gcc --version > ARCH_PLATFORM - if grep -q aarch64 "ARCH_PLATFORM"; then - ARCH_PLATFORM_DIR=aarch64-linux-gnu - else - ARCH_PLATFORM_DIR=arm-linux-gnueabihf - fi - - # install headers - install -d -m 0655 ${D}${includedir}/EGL - install -m 0644 ${S}/${PV}/glesHeaders/EGL/*.h ${D}${includedir}/EGL/ - install -d -m 0655 ${D}${includedir}/GLES - install -m 0644 ${S}/${PV}/glesHeaders/GLES/*.h ${D}${includedir}/GLES/ - install -d -m 0655 ${D}${includedir}/GLES2 - install -m 0644 ${S}/${PV}/glesHeaders/GLES2/*.h ${D}${includedir}/GLES2/ - install -d -m 0655 ${D}${includedir}/KHR - install -m 0644 ${S}/${PV}/glesHeaders/KHR/*.h ${D}${includedir}/KHR/ - - install -d ${D}${libdir}/pkgconfig - install -m 0644 ${WORKDIR}/egl.pc ${D}${libdir}/pkgconfig/egl.pc - install -m 0644 ${WORKDIR}/glesv2.pc ${D}${libdir}/pkgconfig/glesv2.pc - install -m 0644 ${WORKDIR}/glesv1.pc ${D}${libdir}/pkgconfig/glesv1.pc - install -m 0644 ${WORKDIR}/glesv1_cm.pc ${D}${libdir}/pkgconfig/glesv1_cm.pc - - install -d ${D}${libdir} - install -d ${D}${includedir} - - cp -a --no-preserve=ownership ${S}/${PV}/${ARCH_PLATFORM_DIR}/common/*.so* ${D}${libdir} - - if [ "${USE_WL}" = "yes" ]; then - install -m 0644 ${S}/${PV}/glesHeaders/GBM/gbm.h ${D}${includedir}/ - install -m 0644 ${WORKDIR}/gbm.pc ${D}${libdir}/pkgconfig/gbm.pc - install -m 0644 ${WORKDIR}/wayland-egl.pc ${D}${libdir}/pkgconfig/wayland-egl.pc - install -Dm 0644 ${S}/${PV}/${ARCH_PLATFORM_DIR}/wayland/libMali.so.8.0 ${D}${libdir}/wayland/libMali.so.8.0 - ln -snf wayland/libMali.so.8.0 ${D}${libdir}/libMali.so.8.0 - elif [ "${USE_X11}" = "yes" ]; then - install -Dm 0644 ${S}/${PV}/${ARCH_PLATFORM_DIR}/x11/libMali.so.8.0 ${D}${libdir}/x11/libMali.so.8.0 - ln -snf x11/libMali.so.8.0 ${D}${libdir}/libMali.so.8.0 - elif [ "${USE_FB}" = "yes" ]; then - install -Dm 0644 ${S}/${PV}/${ARCH_PLATFORM_DIR}/fbdev/libMali.so.8.0 ${D}${libdir}/fbdev/libMali.so.8.0 - ln -snf fbdev/libMali.so.8.0 ${D}${libdir}/libMali.so.8.0 - else - install -Dm 0644 ${S}/${PV}/${ARCH_PLATFORM_DIR}/headless/libMali.so.8.0 ${D}${libdir}/headless/libMali.so.8.0 - ln -snf headless/libMali.so.8.0 ${D}${libdir}/libMali.so.8.0 - fi - - if ${@bb.utils.contains('DISTRO_FEATURES', 'x11', 'false', 'true', d)}; then - sed -i -e 's/^#if defined(MESA_EGL_NO_X11_HEADERS)$/#if (1)/' ${D}${includedir}/EGL/eglplatform.h - fi -} - - -# Inhibit warnings about files being stripped -INHIBIT_PACKAGE_DEBUG_SPLIT = "1" -INHIBIT_PACKAGE_STRIP = "1" -INHIBIT_SYSROOT_STRIP = "1" - -RREPLACES_${PN} = "libegl libgles1 libglesv1-cm1 libgles2 libglesv2-2 libgbm" -RPROVIDES_${PN} = "libegl libgles1 libglesv1-cm1 libgles2 libglesv2-2 libgbm" -RCONFLICTS_${PN} = "libegl libgles1 libglesv1-cm1 libgles2 libglesv2-2 libgbm" - -# These libraries shouldn't get installed in world builds unless something -# explicitly depends upon them. -EXCLUDE_FROM_WORLD = "1" -FILES_${PN} += "${libdir}/*" diff --git a/meta-xilinx-bsp/recipes-graphics/mali/kernel-module-mali.bb b/meta-xilinx-bsp/recipes-graphics/mali/kernel-module-mali.bb deleted file mode 100644 index fe2fbdcf..00000000 --- a/meta-xilinx-bsp/recipes-graphics/mali/kernel-module-mali.bb +++ /dev/null @@ -1,52 +0,0 @@ -SUMMARY = "A Mali 400 Linux Kernel module" -SECTION = "kernel/modules" - -LICENSE = "GPLv2" -LIC_FILES_CHKSUM = " \ - file://linux/license/gpl/mali_kernel_license.h;md5=436192a2c5cfd47df0ad1987dffc4ae6 \ - " - -PV = "r8p0-01rel0" - -SRC_URI = " \ - https://developer.arm.com/-/media/Files/downloads/mali-drivers/kernel/mali-utgard-gpu/DX910-SW-99002-${PV}.tgz \ - file://0001-Change-Makefile-to-be-compatible-with-Yocto.patch \ - file://0002-staging-mali-r8p0-01rel0-Add-the-ZYNQ-ZYNQMP-platfor.patch \ - file://0003-staging-mali-r8p0-01rel0-Remove-unused-trace-macros.patch \ - file://0004-staging-mali-r8p0-01rel0-Don-t-include-mali_read_phy.patch \ - file://0005-linux-mali_kernel_linux.c-Handle-clock-when-probed-a.patch \ - file://0006-arm.c-global-variable-dma_ops-is-removed-from-the-ke.patch \ - file://0007-Replace-__GFP_REPEAT-by-__GFP_RETRY_MAYFAIL.patch \ - file://0008-mali_internal_sync-Rename-wait_queue_t-with-wait_que.patch \ - file://0009-mali_memory_swap_alloc.c-Rename-global_page_state-wi.patch \ - file://0010-common-mali_pm.c-Add-PM-runtime-barrier-after-removi.patch \ - file://0011-linux-mali_kernel_linux.c-Enable-disable-clock-for-r.patch\ - file://0012-linux-mali_memory_os_alloc-Remove-__GFP_COLD.patch\ - file://0013-linux-mali_memory_secure-Add-header-file-dma-direct..patch\ - file://0014-linux-mali_-timer-Get-rid-of-init_timer.patch\ - " -SRC_URI[md5sum] = "8f04ae86957fd56197ad5a9d017b84ff" -SRC_URI[sha256sum] = "bfd14fa3f75a71d4ba313534e651ca1c58dc354e882c0b39867e335882a06350" - -inherit module - -do_make_scripts[depends] += "virtual/kernel:do_unpack" - -S = "${WORKDIR}/DX910-SW-99002-${PV}/driver/src/devicedrv/mali" - -COMPATIBLE_MACHINE = "^$" -COMPATIBLE_MACHINE_zynqmpeg = "zynqmpeg" -COMPATIBLE_MACHINE_zynqmpev = "zynqmpev" - -PACKAGE_ARCH = "${SOC_FAMILY}${SOC_VARIANT}" - -EXTRA_OEMAKE = 'KDIR="${STAGING_KERNEL_DIR}" \ - ARCH="${ARCH}" \ - BUILD=release \ - MALI_PLATFORM="arm" \ - USING_DT=1 \ - MALI_SHARED_INTERRUPTS=1 \ - CROSS_COMPILE="${TARGET_PREFIX}" \ - O=${STAGING_KERNEL_BUILDDIR} \ - MALI_QUIET=1 \ - ' diff --git a/meta-xilinx-bsp/recipes-graphics/mali/kernel-module-mali/0001-Change-Makefile-to-be-compatible-with-Yocto.patch b/meta-xilinx-bsp/recipes-graphics/mali/kernel-module-mali/0001-Change-Makefile-to-be-compatible-with-Yocto.patch deleted file mode 100644 index e5eeb19f..00000000 --- a/meta-xilinx-bsp/recipes-graphics/mali/kernel-module-mali/0001-Change-Makefile-to-be-compatible-with-Yocto.patch +++ /dev/null @@ -1,47 +0,0 @@ -From 6d283b9aa3f7fb761da4cb076b47a62275fc4caa Mon Sep 17 00:00:00 2001 -From: Madhurkiran Harikrishnan <madhurki@xilinx.com> -Date: Tue, 21 Nov 2017 03:57:25 -0800 -Subject: [PATCH 1/9] Change Makefile to be compatible with Yocto - -Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com> -Signed-off-by: Hyun Kwon <hyun.kwon@xilinx.com> -Signed-off-by: Madhurkiran Harikrishnan <madhurki@xilinx.com> -Upstream Status: Inappropriate [Xilinx specific] ---- - driver/src/devicedrv/mali/Makefile | 11 +++++++++-- - 1 file changed, 9 insertions(+), 2 deletions(-) - -diff --git a/driver/src/devicedrv/mali/Makefile b/driver/src/devicedrv/mali/Makefile -index 5a259fe..a6dd94c 100644 ---- Makefile -+++ b/Makefile -@@ -89,7 +89,11 @@ endif - # Define host system directory - KDIR-$(shell uname -m):=/lib/modules/$(shell uname -r)/build - --include $(KDIR)/.config -+ifeq ($(O),) -+ include $(KDIR)/.config -+else -+ include $(O)/.config -+endif - - ifeq ($(ARCH), arm) - # when compiling for ARM we're cross compiling -@@ -204,9 +208,12 @@ EXTRA_DEFINES += -DMALI_MEM_SWAP_TRACKING=1 - endif - - all: $(UMP_SYMVERS_FILE) -- $(MAKE) ARCH=$(ARCH) -C $(KDIR) M=$(CURDIR) modules -+ $(MAKE) ARCH=$(ARCH) -C $(KDIR) M=$(CURDIR) O=$(O) modules - @rm $(FILES_PREFIX)__malidrv_build_info.c $(FILES_PREFIX)__malidrv_build_info.o - -+modules_install: -+ $(MAKE) ARCH=$(ARCH) -C $(KDIR) M=$(CURDIR) modules_install -+ - clean: - $(MAKE) ARCH=$(ARCH) -C $(KDIR) M=$(CURDIR) clean - --- -2.7.4 - diff --git a/meta-xilinx-bsp/recipes-graphics/mali/kernel-module-mali/0002-staging-mali-r8p0-01rel0-Add-the-ZYNQ-ZYNQMP-platfor.patch b/meta-xilinx-bsp/recipes-graphics/mali/kernel-module-mali/0002-staging-mali-r8p0-01rel0-Add-the-ZYNQ-ZYNQMP-platfor.patch deleted file mode 100644 index 0a7b6736..00000000 --- a/meta-xilinx-bsp/recipes-graphics/mali/kernel-module-mali/0002-staging-mali-r8p0-01rel0-Add-the-ZYNQ-ZYNQMP-platfor.patch +++ /dev/null @@ -1,52 +0,0 @@ -From f27aab2b0e4d5dea9b5a0e4648c142257940c428 Mon Sep 17 00:00:00 2001 -From: Hyun Kwon <hyun.kwon@xilinx.com> -Date: Thu, 25 Jun 2015 17:14:42 -0700 -Subject: [PATCH 2/9] staging: mali: r8p0-01rel0: Add the ZYNQ/ZYNQMP platform - -Add the number of PP cores that is required for Zynq/ZynqMP configuration. - -Signed-off-by: Hyun Kwon <hyun.kwon@xilinx.com> -Signed-off-by: Michal Simek <michal.simek@xilinx.com> -Upstream Status: Inappropriate [Xilinx specific] ---- - driver/src/devicedrv/mali/platform/arm/arm.c | 10 ++++++++++ - 1 file changed, 10 insertions(+) - -diff --git a/driver/src/devicedrv/mali/platform/arm/arm.c b/driver/src/devicedrv/mali/platform/arm/arm.c -index 4e09aca..fac99bc 100644 ---- platform/arm/arm.c -+++ b/platform/arm/arm.c -@@ -261,6 +261,10 @@ static struct mali_gpu_device_data mali_gpu_data = { - .dedicated_mem_start = 0x80000000, /* Physical start address (use 0xD0000000 for old indirect setup) */ - .dedicated_mem_size = 0x10000000, /* 256MB */ - #endif -+#if defined(CONFIG_ARCH_ZYNQ) || defined(CONFIG_ARCH_ZYNQMP) -+ .fb_start = 0x00000000, -+ .fb_size = 0xfffff000, -+#else - #if defined(CONFIG_ARM64) - /* Some framebuffer drivers get the framebuffer dynamically, such as through GEM, - * in which the memory resource can't be predicted in advance. -@@ -271,6 +275,7 @@ static struct mali_gpu_device_data mali_gpu_data = { - .fb_start = 0xe0000000, - .fb_size = 0x01000000, - #endif -+#endif /* !defined(CONFIG_ARCH_ZYNQ) && !defined(CONFIG_ARCH_ZYNQMP) */ - .control_interval = 1000, /* 1000ms */ - .utilization_callback = mali_gpu_utilization_callback, - .get_clock_info = NULL, -@@ -505,6 +510,11 @@ int mali_platform_device_init(struct platform_device *device) - mali_write_phys(0xC0010020, 0xA); /* Enable direct memory mapping for FPGA */ - } - } -+#elif defined(CONFIG_ARCH_ZYNQ) || defined(CONFIG_ARCH_ZYNQMP) -+ -+ MALI_DEBUG_PRINT(4, ("Registering Zynq/ZynqMP Mali-400 device\n")); -+ num_pp_cores = 2; -+ - #endif - - /* After kernel 3.15 device tree will default set dev --- -2.7.4 - diff --git a/meta-xilinx-bsp/recipes-graphics/mali/kernel-module-mali/0003-staging-mali-r8p0-01rel0-Remove-unused-trace-macros.patch b/meta-xilinx-bsp/recipes-graphics/mali/kernel-module-mali/0003-staging-mali-r8p0-01rel0-Remove-unused-trace-macros.patch deleted file mode 100644 index 98aa6ac9..00000000 --- a/meta-xilinx-bsp/recipes-graphics/mali/kernel-module-mali/0003-staging-mali-r8p0-01rel0-Remove-unused-trace-macros.patch +++ /dev/null @@ -1,35 +0,0 @@ -From d6e44bbf8d1377f78481f611dec237e8d24baf74 Mon Sep 17 00:00:00 2001 -From: Madhurkiran Harikrishnan <madhurki@xilinx.com> -Date: Tue, 21 Nov 2017 04:00:27 -0800 -Subject: [PATCH 3/9] staging: mali: r8p0-01rel0: Remove unused trace macros - -TRACE_SYSTEM_STRING is not need in each trace file anymore. - -Signed-off-by: Hyun Kwon <hyun.kwon@xilinx.com> -Signed-off-by: Madhurkiran Harikrishnan <madhurki@xilinx.com> -Upstream Status: Pending ---- - driver/src/devicedrv/mali/linux/mali_linux_trace.h | 2 -- - 1 file changed, 2 deletions(-) - -diff --git a/driver/src/devicedrv/mali/linux/mali_linux_trace.h b/driver/src/devicedrv/mali/linux/mali_linux_trace.h -index 7f0b19d..33cb1ca 100644 ---- linux/mali_linux_trace.h -+++ b/linux/mali_linux_trace.h -@@ -13,13 +13,11 @@ - - #include <linux/types.h> - --#include <linux/stringify.h> - #include <linux/tracepoint.h> - - #undef TRACE_SYSTEM - #define TRACE_SYSTEM mali - #ifndef TRACEPOINTS_ENABLED --#define TRACE_SYSTEM_STRING __stringfy(TRACE_SYSTEM) - #endif - #define TRACE_INCLUDE_PATH . - #define TRACE_INCLUDE_FILE mali_linux_trace --- -2.7.4 - diff --git a/meta-xilinx-bsp/recipes-graphics/mali/kernel-module-mali/0004-staging-mali-r8p0-01rel0-Don-t-include-mali_read_phy.patch b/meta-xilinx-bsp/recipes-graphics/mali/kernel-module-mali/0004-staging-mali-r8p0-01rel0-Don-t-include-mali_read_phy.patch deleted file mode 100644 index c5c49679..00000000 --- a/meta-xilinx-bsp/recipes-graphics/mali/kernel-module-mali/0004-staging-mali-r8p0-01rel0-Don-t-include-mali_read_phy.patch +++ /dev/null @@ -1,47 +0,0 @@ -From 2f5e8944357f43fbde4cb642c6ee4a699c88efb5 Mon Sep 17 00:00:00 2001 -From: Hyun Kwon <hyun.kwon@xilinx.com> -Date: Wed, 29 Jun 2016 09:14:37 -0700 -Subject: [PATCH 4/9] staging: mali: r8p0-01rel0: Don't include - mali_read_phys() for zynq/zynqmp - -mali_read_phys() is not used with CONFIG_ARCH_ZYNQ and CONFIG_ARCH_ZYNQMP. - -Signed-off-by: Hyun Kwon <hyun.kwon@xilinx.com> -Upstream Status: Inappropriate [Xilinx specific] ---- - driver/src/devicedrv/mali/platform/arm/arm.c | 4 ++++ - 1 file changed, 4 insertions(+) - -diff --git a/driver/src/devicedrv/mali/platform/arm/arm.c b/driver/src/devicedrv/mali/platform/arm/arm.c -index fac99bc..62f9be6 100644 ---- platform/arm/arm.c -+++ b/platform/arm/arm.c -@@ -38,7 +38,9 @@ - static int mali_core_scaling_enable = 0; - - void mali_gpu_utilization_callback(struct mali_gpu_utilization_data *data); -+#if !(defined(CONFIG_ARCH_ZYNQ) || defined(CONFIG_ARCH_ZYNQMP)) - static u32 mali_read_phys(u32 phys_addr); -+#endif - #if defined(CONFIG_ARCH_REALVIEW) - static void mali_write_phys(u32 phys_addr, u32 value); - #endif -@@ -578,6 +580,7 @@ int mali_platform_device_deinit(struct platform_device *device) - - #endif /* CONFIG_MALI_DT */ - -+#if !(defined(CONFIG_ARCH_ZYNQ) || defined(CONFIG_ARCH_ZYNQMP)) - static u32 mali_read_phys(u32 phys_addr) - { - u32 phys_addr_page = phys_addr & 0xFFFFE000; -@@ -592,6 +595,7 @@ static u32 mali_read_phys(u32 phys_addr) - - return ret; - } -+#endif - - #if defined(CONFIG_ARCH_REALVIEW) - static void mali_write_phys(u32 phys_addr, u32 value) --- -2.7.4 - diff --git a/meta-xilinx-bsp/recipes-graphics/mali/kernel-module-mali/0005-linux-mali_kernel_linux.c-Handle-clock-when-probed-a.patch b/meta-xilinx-bsp/recipes-graphics/mali/kernel-module-mali/0005-linux-mali_kernel_linux.c-Handle-clock-when-probed-a.patch deleted file mode 100644 index 3d784604..00000000 --- a/meta-xilinx-bsp/recipes-graphics/mali/kernel-module-mali/0005-linux-mali_kernel_linux.c-Handle-clock-when-probed-a.patch +++ /dev/null @@ -1,90 +0,0 @@ -From e67e20ec6ff0c9720d87844270421453c738066a Mon Sep 17 00:00:00 2001 -From: Madhurkiran Harikrishnan <madhurki@xilinx.com> -Date: Thu, 16 Feb 2017 12:15:58 -0800 -Subject: [PATCH 5/9] linux/mali_kernel_linux.c: Handle clock when probed and - removed - -This patch will handle the clock through clock -specifier for GPU PP0 and PP1. - -Signed-off-by: Madhurkiran Harikrishnan <madhurki@xilinx.com> -Upstream Status: Inappropriate [Xilinx specific] ---- - .../src/devicedrv/mali/linux/mali_kernel_linux.c | 40 +++++++++++++++++++++- - 1 file changed, 39 insertions(+), 1 deletion(-) - -diff --git a/driver/src/devicedrv/mali/linux/mali_kernel_linux.c b/driver/src/devicedrv/mali/linux/mali_kernel_linux.c -index d7893a3..f15fb56 100644 ---- linux/mali_kernel_linux.c -+++ b/linux/mali_kernel_linux.c -@@ -45,6 +45,14 @@ - #if defined(CONFIG_MALI400_INTERNAL_PROFILING) - #include "mali_profiling_internal.h" - #endif -+ -+#if defined(CONFIG_ARCH_ZYNQMP) -+/* Initialize variables for clocks */ -+struct clk *clk_gpu; -+struct clk *clk_gpu_pp0; -+struct clk *clk_gpu_pp1; -+#endif -+ - #if defined(CONFIG_MALI400_PROFILING) && defined(CONFIG_MALI_DVFS) - #include "mali_osk_profiling.h" - #include "mali_dvfs_policy.h" -@@ -580,7 +588,23 @@ static int mali_probe(struct platform_device *pdev) - } - #endif - -- -+#if defined(CONFIG_ARCH_ZYNQMP) -+ /* Initialize clocks for GPU and PP */ -+ clk_gpu = devm_clk_get(&pdev->dev, "gpu"); -+ if (IS_ERR(clk_gpu)) -+ return PTR_ERR(clk_gpu); -+ clk_prepare_enable(clk_gpu); -+ -+ clk_gpu_pp0 = devm_clk_get(&pdev->dev, "gpu_pp0"); -+ if (IS_ERR(clk_gpu_pp0)) -+ return PTR_ERR(clk_gpu_pp0); -+ clk_prepare_enable(clk_gpu_pp0); -+ -+ clk_gpu_pp1 = devm_clk_get(&pdev->dev, "gpu_pp1"); -+ if (IS_ERR(clk_gpu_pp1)) -+ return PTR_ERR(clk_gpu_pp1); -+ clk_prepare_enable(clk_gpu_pp1); -+#endif - if (_MALI_OSK_ERR_OK == _mali_osk_wq_init()) { - /* Initialize the Mali GPU HW specified by pdev */ - if (_MALI_OSK_ERR_OK == mali_initialize_subsystems()) { -@@ -608,6 +632,12 @@ static int mali_probe(struct platform_device *pdev) - _mali_osk_wq_term(); - } - -+#if defined(CONFIG_ARCH_ZYNQMP) -+ clk_disable_unprepare(clk_gpu); -+ clk_disable_unprepare(clk_gpu_pp0); -+ clk_disable_unprepare(clk_gpu_pp1); -+#endif -+ - #ifdef CONFIG_MALI_DEVFREQ - mali_devfreq_term(mdev); - devfreq_init_failed: -@@ -673,6 +703,14 @@ static int mali_remove(struct platform_device *pdev) - mali_platform_device_deinit(mali_platform_device); - #endif - mali_platform_device = NULL; -+ -+#if defined(CONFIG_ARCH_ZYNQMP) -+ /* Remove clock */ -+ clk_disable_unprepare(clk_gpu); -+ clk_disable_unprepare(clk_gpu_pp0); -+ clk_disable_unprepare(clk_gpu_pp1); -+#endif -+ - return 0; - } - --- -2.7.4 - diff --git a/meta-xilinx-bsp/recipes-graphics/mali/kernel-module-mali/0006-arm.c-global-variable-dma_ops-is-removed-from-the-ke.patch b/meta-xilinx-bsp/recipes-graphics/mali/kernel-module-mali/0006-arm.c-global-variable-dma_ops-is-removed-from-the-ke.patch deleted file mode 100644 index 3e1745fd..00000000 --- a/meta-xilinx-bsp/recipes-graphics/mali/kernel-module-mali/0006-arm.c-global-variable-dma_ops-is-removed-from-the-ke.patch +++ /dev/null @@ -1,35 +0,0 @@ -From ed7242238151c12029c566d1974058c579d8ae3d Mon Sep 17 00:00:00 2001 -From: Madhurkiran Harikrishnan <madhurki@xilinx.com> -Date: Wed, 25 Jan 2017 10:00:33 -0800 -Subject: [PATCH 6/9] arm.c: global variable dma_ops is removed from the kernel - 4.7 - -Refer kernel commit 1dccb598df549d892b6450c261da54cdd7af44b4, the global -dma_ops variable and the special-casing for ACPI is removed , and just -returns the dma ops that got set for the device, or the dummy_dma_ops -if none were present. - -Signed-off-by: Madhurkiran Harikrishnan <madhurki@xilinx.com> -Upstream Status: Pending ---- - driver/src/devicedrv/mali/platform/arm/arm.c | 3 ++- - 1 file changed, 2 insertions(+), 1 deletion(-) - -diff --git a/driver/src/devicedrv/mali/platform/arm/arm.c b/driver/src/devicedrv/mali/platform/arm/arm.c -index 62f9be6..57ca989 100644 ---- platform/arm/arm.c -+++ b/platform/arm/arm.c -@@ -529,8 +529,9 @@ int mali_platform_device_init(struct platform_device *device) - */ - if (!device->dev.dma_mask) - device->dev.dma_mask = &device->dev.coherent_dma_mask; -+#if (LINUX_VERSION_CODE < KERNEL_VERSION(4, 8, 0)) - device->dev.archdata.dma_ops = dma_ops; -- -+#endif - err = platform_device_add_data(device, &mali_gpu_data, sizeof(mali_gpu_data)); - - if (0 == err) { --- -2.7.4 - diff --git a/meta-xilinx-bsp/recipes-graphics/mali/kernel-module-mali/0007-Replace-__GFP_REPEAT-by-__GFP_RETRY_MAYFAIL.patch b/meta-xilinx-bsp/recipes-graphics/mali/kernel-module-mali/0007-Replace-__GFP_REPEAT-by-__GFP_RETRY_MAYFAIL.patch deleted file mode 100644 index 6e5f5447..00000000 --- a/meta-xilinx-bsp/recipes-graphics/mali/kernel-module-mali/0007-Replace-__GFP_REPEAT-by-__GFP_RETRY_MAYFAIL.patch +++ /dev/null @@ -1,54 +0,0 @@ -From a8190cd3b346633016d1c0096ef73e0e1ceef438 Mon Sep 17 00:00:00 2001 -From: Madhurkiran Harikrishnan <madhurki@xilinx.com> -Date: Tue, 5 Dec 2017 09:25:15 -0800 -Subject: [PATCH 7/9] Replace __GFP_REPEAT by __GFP_RETRY_MAYFAIL - -Refer kernel patch dcda9b04713c3f6ff0875652924844fae28286ea -which replaces with a useful semantic - -Signed-off-by: Madhurkiran Harikrishnan <madhurki@xilinx.com> -Upstream-Status: Pending ---- - driver/src/devicedrv/mali/linux/mali_memory_os_alloc.c | 4 ++++ - driver/src/devicedrv/mali/linux/mali_osk_notification.c | 7 ++++++- - 2 files changed, 10 insertions(+), 1 deletion(-) - -diff --git a/driver/src/devicedrv/mali/linux/mali_memory_os_alloc.c b/driver/src/devicedrv/mali/linux/mali_memory_os_alloc.c -index 5fe1270..1602371 100644 ---- linux/mali_memory_os_alloc.c -+++ b/linux/mali_memory_os_alloc.c -@@ -202,7 +202,11 @@ int mali_mem_os_alloc_pages(mali_mem_os_mem *os_mem, u32 size) - /* Allocate new pages, if needed. */ - for (i = 0; i < remaining; i++) { - dma_addr_t dma_addr; -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(4, 14, 0) -+ gfp_t flags = __GFP_ZERO | __GFP_RETRY_MAYFAIL | __GFP_NOWARN | __GFP_COLD; -+#else - gfp_t flags = __GFP_ZERO | __GFP_REPEAT | __GFP_NOWARN | __GFP_COLD; -+#endif - int err; - - #if defined(CONFIG_ARM) && !defined(CONFIG_ARM_LPAE) -diff --git a/driver/src/devicedrv/mali/linux/mali_osk_notification.c b/driver/src/devicedrv/mali/linux/mali_osk_notification.c -index b22fe68..d0c302a 100644 ---- linux/mali_osk_notification.c -+++ b/linux/mali_osk_notification.c -@@ -55,9 +55,14 @@ _mali_osk_notification_t *_mali_osk_notification_create(u32 type, u32 size) - { - /* OPT Recycling of notification objects */ - _mali_osk_notification_wrapper_t *notification; -- -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(4, 14, 0) -+ notification = (_mali_osk_notification_wrapper_t *)kmalloc(sizeof(_mali_osk_notification_wrapper_t) + size, -+ GFP_KERNEL | __GFP_HIGH | __GFP_RETRY_MAYFAIL); -+#else - notification = (_mali_osk_notification_wrapper_t *)kmalloc(sizeof(_mali_osk_notification_wrapper_t) + size, - GFP_KERNEL | __GFP_HIGH | __GFP_REPEAT); -+#endif -+ - if (NULL == notification) { - MALI_DEBUG_PRINT(1, ("Failed to create a notification object\n")); - return NULL; --- -2.7.4 - diff --git a/meta-xilinx-bsp/recipes-graphics/mali/kernel-module-mali/0008-mali_internal_sync-Rename-wait_queue_t-with-wait_que.patch b/meta-xilinx-bsp/recipes-graphics/mali/kernel-module-mali/0008-mali_internal_sync-Rename-wait_queue_t-with-wait_que.patch deleted file mode 100644 index 592fea04..00000000 --- a/meta-xilinx-bsp/recipes-graphics/mali/kernel-module-mali/0008-mali_internal_sync-Rename-wait_queue_t-with-wait_que.patch +++ /dev/null @@ -1,108 +0,0 @@ -From 717d7899f6d8048c6b88b3c52e8a9c8afbddbb65 Mon Sep 17 00:00:00 2001 -From: Madhurkiran Harikrishnan <madhurki@xilinx.com> -Date: Tue, 5 Dec 2017 09:48:42 -0800 -Subject: [PATCH 8/9] mali_internal_sync: Rename wait_queue_t with - wait_queue_entry_t - -Refer kernel patch ac6424b981bce1c4bc55675c6ce11bfe1bbfa64f -and 2055da which replaces the struct name - -Signed-off-by: Madhurkiran Harikrishnan <madhurki@xilinx.com> -Upstream-Status: Pending ---- - .../src/devicedrv/mali/linux/mali_internal_sync.c | 27 ++++++++++++++++++++-- - .../src/devicedrv/mali/linux/mali_internal_sync.h | 4 ++++ - 2 files changed, 29 insertions(+), 2 deletions(-) - -diff --git a/driver/src/devicedrv/mali/linux/mali_internal_sync.c b/driver/src/devicedrv/mali/linux/mali_internal_sync.c -index 1f2574e..957a056 100644 ---- linux/mali_internal_sync.c -+++ b/linux/mali_internal_sync.c -@@ -121,8 +121,13 @@ static void mali_internal_sync_fence_add_fence(struct mali_internal_sync_fence * - } - #endif - -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(4, 13, 0) -+static int mali_internal_sync_fence_wake_up_wq(wait_queue_entry_t *curr, unsigned mode, -+ int wake_flags, void *key) -+#else - static int mali_internal_sync_fence_wake_up_wq(wait_queue_t *curr, unsigned mode, - int wake_flags, void *key) -+#endif - { - struct mali_internal_sync_fence_waiter *wait; - MALI_IGNORE(mode); -@@ -130,8 +135,12 @@ static int mali_internal_sync_fence_wake_up_wq(wait_queue_t *curr, unsigned mode - MALI_IGNORE(key); - - wait = container_of(curr, struct mali_internal_sync_fence_waiter, work); -- list_del_init(&wait->work.task_list); - -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(4, 13, 0) -+ list_del_init(&wait->work.entry); -+#else -+ list_del_init(&wait->work.task_list); -+#endif - wait->callback(wait->work.private, wait); - return 1; - } -@@ -498,7 +507,11 @@ void mali_internal_sync_fence_waiter_init(struct mali_internal_sync_fence_waiter - MALI_DEBUG_ASSERT_POINTER(waiter); - MALI_DEBUG_ASSERT_POINTER(callback); - -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(4, 13, 0) -+ INIT_LIST_HEAD(&waiter->work.entry); -+#else - INIT_LIST_HEAD(&waiter->work.task_list); -+#endif - waiter->callback = callback; - } - -@@ -560,8 +573,13 @@ int mali_internal_sync_fence_wait_async(struct mali_internal_sync_fence *sync_fe - spin_lock_irqsave(&sync_fence->wq.lock, flags); - err = sync_fence->fence->ops->signaled(sync_fence->fence); - -- if (0 == err) -+ if (0 == err){ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(4, 13, 0) -+ __add_wait_queue_entry_tail(&sync_fence->wq, &waiter->work); -+#else - __add_wait_queue_tail(&sync_fence->wq, &waiter->work); -+#endif -+ } - spin_unlock_irqrestore(&sync_fence->wq.lock, flags); - - return err; -@@ -578,8 +596,13 @@ int mali_internal_sync_fence_cancel_async(struct mali_internal_sync_fence *sync_ - MALI_DEBUG_ASSERT_POINTER(waiter); - - spin_lock_irqsave(&sync_fence->wq.lock, flags); -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(4, 13, 0) -+ if (!list_empty(&waiter->work.entry)) -+ list_del_init(&waiter->work.entry); -+#else - if (!list_empty(&waiter->work.task_list)) - list_del_init(&waiter->work.task_list); -+#endif - else - ret = -ENOENT; - spin_unlock_irqrestore(&sync_fence->wq.lock, flags); -diff --git a/driver/src/devicedrv/mali/linux/mali_internal_sync.h b/driver/src/devicedrv/mali/linux/mali_internal_sync.h -index a5655c7..70f29f9 100644 ---- linux/mali_internal_sync.h -+++ b/linux/mali_internal_sync.h -@@ -112,7 +112,11 @@ typedef void (*mali_internal_sync_callback_t)(struct mali_internal_sync_fence *s - struct mali_internal_sync_fence_waiter *waiter); - - struct mali_internal_sync_fence_waiter { -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(4, 13, 0) -+ wait_queue_entry_t work; -+#else - wait_queue_t work; -+#endif - mali_internal_sync_callback_t callback; - #if LINUX_VERSION_CODE >= KERNEL_VERSION(4, 9, 0) - #if LINUX_VERSION_CODE < KERNEL_VERSION(4, 10, 0) --- -2.7.4 - diff --git a/meta-xilinx-bsp/recipes-graphics/mali/kernel-module-mali/0009-mali_memory_swap_alloc.c-Rename-global_page_state-wi.patch b/meta-xilinx-bsp/recipes-graphics/mali/kernel-module-mali/0009-mali_memory_swap_alloc.c-Rename-global_page_state-wi.patch deleted file mode 100644 index 3445512c..00000000 --- a/meta-xilinx-bsp/recipes-graphics/mali/kernel-module-mali/0009-mali_memory_swap_alloc.c-Rename-global_page_state-wi.patch +++ /dev/null @@ -1,48 +0,0 @@ -From 478de18bf513ecad419d25981e7b66c78126752c Mon Sep 17 00:00:00 2001 -From: Madhurkiran Harikrishnan <madhurki@xilinx.com> -Date: Tue, 5 Dec 2017 09:58:36 -0800 -Subject: [PATCH 9/9] mali_memory_swap_alloc.c: Rename global_page_state with - global_zone_page_state - -Refer Kernel commit c41f012ade0b95b0a6e25c7150673e0554736165 -Which simply renames without any functional changes - -Signed-off-by: Madhurkiran Harikrishnan <madhurki@xilinx.com> -Upstream-Status: Pending ---- - driver/src/devicedrv/mali/linux/mali_memory_swap_alloc.c | 10 +++++++++- - 1 file changed, 9 insertions(+), 1 deletion(-) - -diff --git a/driver/src/devicedrv/mali/linux/mali_memory_swap_alloc.c b/driver/src/devicedrv/mali/linux/mali_memory_swap_alloc.c -index a54faca..e122b4c 100644 ---- linux/mali_memory_swap_alloc.c -+++ b/linux/mali_memory_swap_alloc.c -@@ -248,7 +248,11 @@ static void mali_mem_swap_swapped_bkend_pool_shrink(_mali_mem_swap_pool_shrink_t - } - - /* Get system free pages number. */ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(4, 14, 0) -+ system_free_size = global_zone_page_state(NR_FREE_PAGES) * PAGE_SIZE; -+#else - system_free_size = global_page_state(NR_FREE_PAGES) * PAGE_SIZE; -+#endif - last_gpu_utilization = _mali_ukk_utilization_gp_pp(); - - if ((last_gpu_utilization < gpu_utilization_threshold_value) -@@ -575,8 +579,12 @@ int mali_mem_swap_alloc_pages(mali_mem_swap *swap_mem, u32 size, u32 *bkend_idx) - - list_add_tail(&m_page->list, &swap_mem->pages); - } -- -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(4, 14, 0) -+ system_free_size = global_zone_page_state(NR_FREE_PAGES) * PAGE_SIZE; -+#else - system_free_size = global_page_state(NR_FREE_PAGES) * PAGE_SIZE; -+#endif -+ - - if ((system_free_size < mali_mem_swap_out_threshold_value) - && (mem_backend_swapped_pool_size > (mali_mem_swap_out_threshold_value >> 2)) --- -2.7.4 - diff --git a/meta-xilinx-bsp/recipes-graphics/mali/kernel-module-mali/0010-common-mali_pm.c-Add-PM-runtime-barrier-after-removi.patch b/meta-xilinx-bsp/recipes-graphics/mali/kernel-module-mali/0010-common-mali_pm.c-Add-PM-runtime-barrier-after-removi.patch deleted file mode 100644 index 98a86c88..00000000 --- a/meta-xilinx-bsp/recipes-graphics/mali/kernel-module-mali/0010-common-mali_pm.c-Add-PM-runtime-barrier-after-removi.patch +++ /dev/null @@ -1,31 +0,0 @@ -From 58e2c55176f1a146781430b2a570c8ce5f80d426 Mon Sep 17 00:00:00 2001 -From: Madhurkiran Harikrishnan <madhurki@xilinx.com> -Date: Mon, 28 Aug 2017 09:40:37 -0700 -Subject: [PATCH] common/mali_pm.c: Add PM runtime barrier after removing - suspend - -Runtime PM suspend "put" results in addition of PM suspend -API in work queue. This barrier API will remove it from -the work queue. - -Signed-off-by: Madhurkiran Harikrishnan <madhurki@xilinx.com> -Upstream-Status: Pending ---- - driver/src/devicedrv/mali/common/mali_pm.c | 1 + - 1 file changed, 1 insertion(+) - -diff --git a/driver/src/devicedrv/mali/common/mali_pm.c b/driver/src/devicedrv/mali/common/mali_pm.c -index 858c689..62a1e5f 100644 ---- common/mali_pm.c -+++ b/common/mali_pm.c -@@ -301,6 +301,7 @@ void mali_pm_init_end(void) - } - - _mali_osk_pm_dev_ref_put(); -+ _mali_osk_pm_dev_barrier(); - } - - void mali_pm_update_sync(void) --- -2.7.4 - diff --git a/meta-xilinx-bsp/recipes-graphics/mali/kernel-module-mali/0011-linux-mali_kernel_linux.c-Enable-disable-clock-for-r.patch b/meta-xilinx-bsp/recipes-graphics/mali/kernel-module-mali/0011-linux-mali_kernel_linux.c-Enable-disable-clock-for-r.patch deleted file mode 100644 index 38ab4042..00000000 --- a/meta-xilinx-bsp/recipes-graphics/mali/kernel-module-mali/0011-linux-mali_kernel_linux.c-Enable-disable-clock-for-r.patch +++ /dev/null @@ -1,153 +0,0 @@ -From aeff13ad9e9ef73172a9325f669aefd3c0403dbb Mon Sep 17 00:00:00 2001 -From: Madhurkiran Harikrishnan <madhurki@xilinx.com> -Date: Wed, 21 Feb 2018 16:52:15 -0800 -Subject: [PATCH] linux/mali_kernel_linux.c: Enable/disable clock for runtime - resume/suspend - -Enable/Disable the clock for GP,PP0 and PP1 during runtime -resume/suspend. - -Signed-off-by: Madhurkiran Harikrishnan <madhurki@xilinx.com> -Reviewed-by: Hyun Kwon <hyunk@xilinx.com> -Upstream Status: Inappropriate [Xilinx specific] ---- - .../src/devicedrv/mali/linux/mali_kernel_linux.c | 65 ++++++++++++++++++---- - 1 file changed, 54 insertions(+), 11 deletions(-) - -diff --git a/driver/src/devicedrv/mali/linux/mali_kernel_linux.c b/driver/src/devicedrv/mali/linux/mali_kernel_linux.c -index f15fb56..e61f33b 100644 ---- linux/mali_kernel_linux.c -+++ b/linux/mali_kernel_linux.c -@@ -51,6 +51,7 @@ - struct clk *clk_gpu; - struct clk *clk_gpu_pp0; - struct clk *clk_gpu_pp1; -+mali_bool clk_enabled; - #endif - - #if defined(CONFIG_MALI400_PROFILING) && defined(CONFIG_MALI_DVFS) -@@ -281,6 +282,46 @@ struct file_operations mali_fops = { - .mmap = mali_mmap - }; - -+static int mali_enable_clk(void) -+{ -+#if defined(CONFIG_ARCH_ZYNQMP) -+ int err = 0; -+ -+ if (clk_enabled) -+ return 0; -+ -+ clk_enabled = MALI_TRUE; -+ err = clk_prepare_enable(clk_gpu); -+ if (err) { -+ MALI_PRINT_ERROR(("Could not enable clock for GP\n\r")); -+ return err; -+ } -+ err = clk_prepare_enable(clk_gpu_pp0); -+ if (err) { -+ MALI_PRINT_ERROR(("Could not enable clock for PP0\n\r")); -+ return err; -+ } -+ err = clk_prepare_enable(clk_gpu_pp1); -+ if (err) { -+ MALI_PRINT_ERROR(("Could not enable clock for PP1\n\r")); -+ return err; -+ } -+#endif -+ return 0; -+} -+ -+static void mali_disable_clk(void) -+{ -+#if defined(CONFIG_ARCH_ZYNQMP) -+ if (clk_enabled) { -+ clk_enabled = MALI_FALSE; -+ clk_disable_unprepare(clk_gpu); -+ clk_disable_unprepare(clk_gpu_pp0); -+ clk_disable_unprepare(clk_gpu_pp1); -+ } -+#endif -+} -+ - #if MALI_ENABLE_CPU_CYCLES - void mali_init_cpu_time_counters(int reset, int enable_divide_by_64) - { -@@ -593,18 +634,19 @@ static int mali_probe(struct platform_device *pdev) - clk_gpu = devm_clk_get(&pdev->dev, "gpu"); - if (IS_ERR(clk_gpu)) - return PTR_ERR(clk_gpu); -- clk_prepare_enable(clk_gpu); - - clk_gpu_pp0 = devm_clk_get(&pdev->dev, "gpu_pp0"); - if (IS_ERR(clk_gpu_pp0)) - return PTR_ERR(clk_gpu_pp0); -- clk_prepare_enable(clk_gpu_pp0); - - clk_gpu_pp1 = devm_clk_get(&pdev->dev, "gpu_pp1"); - if (IS_ERR(clk_gpu_pp1)) - return PTR_ERR(clk_gpu_pp1); -- clk_prepare_enable(clk_gpu_pp1); - #endif -+ -+ err = mali_enable_clk(); -+ if (err) -+ return err; - if (_MALI_OSK_ERR_OK == _mali_osk_wq_init()) { - /* Initialize the Mali GPU HW specified by pdev */ - if (_MALI_OSK_ERR_OK == mali_initialize_subsystems()) { -@@ -632,11 +674,6 @@ static int mali_probe(struct platform_device *pdev) - _mali_osk_wq_term(); - } - --#if defined(CONFIG_ARCH_ZYNQMP) -- clk_disable_unprepare(clk_gpu); -- clk_disable_unprepare(clk_gpu_pp0); -- clk_disable_unprepare(clk_gpu_pp1); --#endif - - #ifdef CONFIG_MALI_DEVFREQ - mali_devfreq_term(mdev); -@@ -644,6 +681,7 @@ devfreq_init_failed: - mali_pm_metrics_term(mdev); - pm_metrics_init_failed: - clk_disable_unprepare(mdev->clock); -+ mali_disable_clk(); - clock_prepare_failed: - clk_put(mdev->clock); - #if (LINUX_VERSION_CODE >= KERNEL_VERSION(3, 19, 0)) && defined(CONFIG_OF) \ -@@ -706,9 +744,7 @@ static int mali_remove(struct platform_device *pdev) - - #if defined(CONFIG_ARCH_ZYNQMP) - /* Remove clock */ -- clk_disable_unprepare(clk_gpu); -- clk_disable_unprepare(clk_gpu_pp0); -- clk_disable_unprepare(clk_gpu_pp1); -+ mali_disable_clk(); - #endif - - return 0; -@@ -816,6 +852,8 @@ static int mali_driver_runtime_suspend(struct device *dev) - devfreq_suspend_device(mdev->devfreq); - #endif - -+ mali_disable_clk(); -+ - return 0; - } else { - return -EBUSY; -@@ -824,6 +862,11 @@ static int mali_driver_runtime_suspend(struct device *dev) - - static int mali_driver_runtime_resume(struct device *dev) - { -+ int err ; -+ -+ err = mali_enable_clk(); -+ if (err) -+ return err; - #ifdef CONFIG_MALI_DEVFREQ - struct mali_device *mdev = dev_get_drvdata(dev); - if (!mdev) --- -2.7.4 - diff --git a/meta-xilinx-bsp/recipes-graphics/mali/kernel-module-mali/0012-linux-mali_memory_os_alloc-Remove-__GFP_COLD.patch b/meta-xilinx-bsp/recipes-graphics/mali/kernel-module-mali/0012-linux-mali_memory_os_alloc-Remove-__GFP_COLD.patch deleted file mode 100644 index 24f0a22c..00000000 --- a/meta-xilinx-bsp/recipes-graphics/mali/kernel-module-mali/0012-linux-mali_memory_os_alloc-Remove-__GFP_COLD.patch +++ /dev/null @@ -1,33 +0,0 @@ -From 779b1883d56804ecd08fe7f57d6c01e3db4e893b Mon Sep 17 00:00:00 2001 -From: Madhurkiran Harikrishnan <madhurkiran.harikrishnan@xilinx.com> -Date: Wed, 5 Dec 2018 18:07:29 -0800 -Subject: [PATCH 1/3] linux: mali_memory_os_alloc: Remove __GFP_COLD - -The support for Cache hot and cold pages are removed from the kernel. -For more information refer kernel commit 453f85d43fa9ee243f0fc3ac4e1be45615301e3f - -Signed-off-by: Madhurkiran Harikrishnan <madhurkiran.harikrishnan@xilinx.com> -Reviewed-by: Hyun Kwon <hyun.kwon@xilinx.com> -Upstream Status: Pending ---- - driver/src/devicedrv/mali/linux/mali_memory_os_alloc.c | 4 +++- - 1 file changed, 3 insertions(+), 1 deletion(-) - -diff --git a/driver/src/devicedrv/mali/linux/mali_memory_os_alloc.c b/driver/src/devicedrv/mali/linux/mali_memory_os_alloc.c -index 1602371..830e8c6 100644 ---- linux/mali_memory_os_alloc.c -+++ b/linux/mali_memory_os_alloc.c -@@ -202,7 +202,9 @@ int mali_mem_os_alloc_pages(mali_mem_os_mem *os_mem, u32 size) - /* Allocate new pages, if needed. */ - for (i = 0; i < remaining; i++) { - dma_addr_t dma_addr; --#if LINUX_VERSION_CODE >= KERNEL_VERSION(4, 14, 0) -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(4, 15, 0) -+ gfp_t flags = __GFP_ZERO | __GFP_RETRY_MAYFAIL | __GFP_NOWARN; -+#elif LINUX_VERSION_CODE == KERNEL_VERSION(4, 14, 0) - gfp_t flags = __GFP_ZERO | __GFP_RETRY_MAYFAIL | __GFP_NOWARN | __GFP_COLD; - #else - gfp_t flags = __GFP_ZERO | __GFP_REPEAT | __GFP_NOWARN | __GFP_COLD; --- -2.7.4 - diff --git a/meta-xilinx-bsp/recipes-graphics/mali/kernel-module-mali/0013-linux-mali_memory_secure-Add-header-file-dma-direct..patch b/meta-xilinx-bsp/recipes-graphics/mali/kernel-module-mali/0013-linux-mali_memory_secure-Add-header-file-dma-direct..patch deleted file mode 100644 index c28a83f4..00000000 --- a/meta-xilinx-bsp/recipes-graphics/mali/kernel-module-mali/0013-linux-mali_memory_secure-Add-header-file-dma-direct..patch +++ /dev/null @@ -1,34 +0,0 @@ -From d20b6eb3e48e56558488dbdda98875b1aed0c29f Mon Sep 17 00:00:00 2001 -From: Madhurkiran Harikrishnan <madhurkiran.harikrishnan@xilinx.com> -Date: Wed, 5 Dec 2018 18:13:28 -0800 -Subject: [PATCH 2/3] linux: mali_memory_secure: Add header file dma-direct.h - -Add dma-direct.h header, as API dma_to_phys is defined here. -refer kernel commit ea8c64ace86647260ec4255f483e5844d62af2df - -Signed-off-by: Madhurkiran Harikrishnan <madhurkiran.harikrishnan@xilinx.com> -Reviewed-by: Hyun Kwon <hyun.kwon@xilinx.com> -Upstream Status: Pending ---- - driver/src/devicedrv/mali/linux/mali_memory_secure.c | 4 ++++ - 1 file changed, 4 insertions(+) - -diff --git a/driver/src/devicedrv/mali/linux/mali_memory_secure.c b/driver/src/devicedrv/mali/linux/mali_memory_secure.c -index 2836b1b..4f55fa5 100644 ---- linux/mali_memory_secure.c -+++ b/linux/mali_memory_secure.c -@@ -13,7 +13,11 @@ - #include "mali_memory_secure.h" - #include "mali_osk.h" - #include <linux/mutex.h> -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(4, 16, 0) -+#include <linux/dma-direct.h> -+#else - #include <linux/dma-mapping.h> -+#endif - #include <linux/dma-buf.h> - - _mali_osk_errcode_t mali_mem_secure_attach_dma_buf(mali_mem_secure *secure_mem, u32 size, int mem_fd) --- -2.7.4 - diff --git a/meta-xilinx-bsp/recipes-graphics/mali/kernel-module-mali/0014-linux-mali_-timer-Get-rid-of-init_timer.patch b/meta-xilinx-bsp/recipes-graphics/mali/kernel-module-mali/0014-linux-mali_-timer-Get-rid-of-init_timer.patch deleted file mode 100644 index a7c1d5cc..00000000 --- a/meta-xilinx-bsp/recipes-graphics/mali/kernel-module-mali/0014-linux-mali_-timer-Get-rid-of-init_timer.patch +++ /dev/null @@ -1,156 +0,0 @@ -From b6936450484b5aa9dd2438367a907af020341d1d Mon Sep 17 00:00:00 2001 -From: Madhurkiran Harikrishnan <madhurkiran.harikrishnan@xilinx.com> -Date: Thu, 6 Dec 2018 13:30:44 -0800 -Subject: [PATCH 3/3] linux: mali_*timer: Get rid of init_timer - -kernel 4.19 got rid of ancient init_timer. Hence, replace it with -timer_setup API. For more information refer kernel commit -7eeb6b893bd28c68b6d664de1d3120e49b855cdb - -Signed-off-by: Madhurkiran Harikrishnan <madhurkiran.harikrishnan@xilinx.com> -Reviewed-by: Hyun Kwon <hyun.kwon@xilinx.com> -Upstream Status: Pending ---- - driver/src/devicedrv/mali/common/mali_control_timer.c | 6 ++++++ - driver/src/devicedrv/mali/common/mali_group.c | 6 ++++++ - driver/src/devicedrv/mali/common/mali_osk.h | 15 ++++++++++++++- - driver/src/devicedrv/mali/linux/mali_osk_timers.c | 15 ++++++++++++++- - 4 files changed, 40 insertions(+), 2 deletions(-) - -diff --git a/driver/src/devicedrv/mali/common/mali_control_timer.c b/driver/src/devicedrv/mali/common/mali_control_timer.c -index 1296ffe..d24b934 100644 ---- common/mali_control_timer.c -+++ b/common/mali_control_timer.c -@@ -65,11 +65,17 @@ _mali_osk_errcode_t mali_control_timer_init(void) - } - } - -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(4, 14, 0) -+ mali_control_timer = _mali_osk_timer_init(mali_control_timer_callback); -+#else - mali_control_timer = _mali_osk_timer_init(); -+#endif - if (NULL == mali_control_timer) { - return _MALI_OSK_ERR_FAULT; - } -+#if LINUX_VERSION_CODE < KERNEL_VERSION(4, 14, 0) - _mali_osk_timer_setcallback(mali_control_timer, mali_control_timer_callback, NULL); -+#endif - - return _MALI_OSK_ERR_OK; - } -diff --git a/driver/src/devicedrv/mali/common/mali_group.c b/driver/src/devicedrv/mali/common/mali_group.c -index 5c7b3f4..1702e9a 100644 ---- common/mali_group.c -+++ b/common/mali_group.c -@@ -65,9 +65,15 @@ struct mali_group *mali_group_create(struct mali_l2_cache_core *core, - - group = _mali_osk_calloc(1, sizeof(struct mali_group)); - if (NULL != group) { -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(4, 14, 0) -+ group->timeout_timer = _mali_osk_timer_init(mali_group_timeout); -+#else - group->timeout_timer = _mali_osk_timer_init(); -+#endif - if (NULL != group->timeout_timer) { -+#if LINUX_VERSION_CODE < KERNEL_VERSION(4, 14, 0) - _mali_osk_timer_setcallback(group->timeout_timer, mali_group_timeout, (void *)group); -+#endif - - group->l2_cache_core[0] = core; - _mali_osk_list_init(&group->group_list); -diff --git a/driver/src/devicedrv/mali/common/mali_osk.h b/driver/src/devicedrv/mali/common/mali_osk.h -index a501778..fe93d79 100644 ---- common/mali_osk.h -+++ b/common/mali_osk.h -@@ -947,7 +947,17 @@ _mali_osk_errcode_t _mali_osk_notification_queue_dequeue(_mali_osk_notification_ - * asked for. - * - * @{ */ -- -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(4, 14, 0) -+/** @brief Initialize a timer -+ * -+ * Allocates resources for a new timer, and initializes them. This does not -+ * start the timer. -+ * -+ * @param callback Function to call when timer expires -+ * @return a pointer to the allocated timer object, or NULL on failure. -+ */ -+_mali_osk_timer_t *_mali_osk_timer_init(_mali_osk_timer_callback_t callback); -+#else - /** @brief Initialize a timer - * - * Allocates resources for a new timer, and initializes them. This does not -@@ -956,6 +966,7 @@ _mali_osk_errcode_t _mali_osk_notification_queue_dequeue(_mali_osk_notification_ - * @return a pointer to the allocated timer object, or NULL on failure. - */ - _mali_osk_timer_t *_mali_osk_timer_init(void); -+#endif - - /** @brief Start a timer - * -@@ -1034,6 +1045,7 @@ void _mali_osk_timer_del_async(_mali_osk_timer_t *tim); - */ - mali_bool _mali_osk_timer_pending(_mali_osk_timer_t *tim); - -+#if LINUX_VERSION_CODE < KERNEL_VERSION(4, 14, 0) - /** @brief Set a timer's callback parameters. - * - * This must be called at least once before a timer is started/modified. -@@ -1047,6 +1059,7 @@ mali_bool _mali_osk_timer_pending(_mali_osk_timer_t *tim); - * @param data Function-specific data to supply to the function on expiry. - */ - void _mali_osk_timer_setcallback(_mali_osk_timer_t *tim, _mali_osk_timer_callback_t callback, void *data); -+#endif - - /** @brief Terminate a timer, and deallocate resources. - * -diff --git a/driver/src/devicedrv/mali/linux/mali_osk_timers.c b/driver/src/devicedrv/mali/linux/mali_osk_timers.c -index e5d7238..f9b5a86 100644 ---- linux/mali_osk_timers.c -+++ b/linux/mali_osk_timers.c -@@ -21,13 +21,24 @@ - struct _mali_osk_timer_t_struct { - struct timer_list timer; - }; -- -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(4, 14, 0) -+typedef void (*timer_timeout_function_t)(struct timer_list *); -+#else - typedef void (*timer_timeout_function_t)(unsigned long); -+#endif - -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(4, 14, 0) -+_mali_osk_timer_t *_mali_osk_timer_init(_mali_osk_timer_callback_t callback) -+#else - _mali_osk_timer_t *_mali_osk_timer_init(void) -+#endif - { - _mali_osk_timer_t *t = (_mali_osk_timer_t *)kmalloc(sizeof(_mali_osk_timer_t), GFP_KERNEL); -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(4, 14, 0) -+ if (NULL != t) timer_setup(&t->timer, (timer_timeout_function_t)callback, 0); -+#else - if (NULL != t) init_timer(&t->timer); -+#endif - return t; - } - -@@ -62,12 +73,14 @@ mali_bool _mali_osk_timer_pending(_mali_osk_timer_t *tim) - return 1 == timer_pending(&(tim->timer)); - } - -+#if LINUX_VERSION_CODE < KERNEL_VERSION(4, 14, 0) - void _mali_osk_timer_setcallback(_mali_osk_timer_t *tim, _mali_osk_timer_callback_t callback, void *data) - { - MALI_DEBUG_ASSERT_POINTER(tim); - tim->timer.data = (unsigned long)data; - tim->timer.function = (timer_timeout_function_t)callback; - } -+#endif - - void _mali_osk_timer_term(_mali_osk_timer_t *tim) - { --- -2.7.4 - diff --git a/meta-xilinx-bsp/recipes-graphics/xorg-driver/xf86-video-armsoc/0001-src-drmmode_xilinx-Add-the-dumb-gem-support-for-Xili.patch b/meta-xilinx-bsp/recipes-graphics/xorg-driver/xf86-video-armsoc/0001-src-drmmode_xilinx-Add-the-dumb-gem-support-for-Xili.patch deleted file mode 100644 index bf2169ee..00000000 --- a/meta-xilinx-bsp/recipes-graphics/xorg-driver/xf86-video-armsoc/0001-src-drmmode_xilinx-Add-the-dumb-gem-support-for-Xili.patch +++ /dev/null @@ -1,141 +0,0 @@ -From 630a8ea035fe2f075f6ea7f4bad0928f5b541c80 Mon Sep 17 00:00:00 2001 -From: Hyun Kwon <hyun.kwon@xilinx.com> -Date: Wed, 21 Jan 2015 11:53:19 -0800 -Subject: [PATCH] src: drmmode_xilinx: Add the dumb gem support for Xilinx - -Add the dumb gem support for Xilinx - -Signed-off-by: Hyun Kwon <hyun.kwon@xilinx.com> -Signed-off-by: Nathan Rossi <nathan@nathanrossi.com> -Upstream-Status: Pending ---- - src/Makefile.am | 3 +- - src/armsoc_driver.c | 1 + - src/drmmode_driver.h | 1 + - src/drmmode_xilinx/drmmode_xilinx.c | 76 +++++++++++++++++++++++++++++++++++++ - 4 files changed, 80 insertions(+), 1 deletion(-) - create mode 100644 src/drmmode_xilinx/drmmode_xilinx.c - -diff --git a/src/Makefile.am b/src/Makefile.am -index 3b2601927c..db5f110fb2 100644 ---- a/src/Makefile.am -+++ b/src/Makefile.am -@@ -43,7 +43,8 @@ armsoc_drv_ladir = @moduledir@/drivers - DRMMODE_SRCS = drmmode_exynos/drmmode_exynos.c \ - drmmode_pl111/drmmode_pl111.c \ - drmmode_kirin/drmmode_kirin.c \ -- drmmode_sti/drmmode_sti.c -+ drmmode_sti/drmmode_sti.c \ -+ drmmode_xilinx/drmmode_xilinx.c - - - armsoc_drv_la_SOURCES = \ -diff --git a/src/armsoc_driver.c b/src/armsoc_driver.c -index 83e74a7ed1..3ace3c7be5 100644 ---- a/src/armsoc_driver.c -+++ b/src/armsoc_driver.c -@@ -737,6 +737,7 @@ static struct drmmode_interface *get_drmmode_implementation(int drm_fd) - &pl111_interface, - &kirin_interface, - &sti_interface, -+ &xilinx_interface, - }; - int i; - -diff --git a/src/drmmode_driver.h b/src/drmmode_driver.h -index 879fc60ddc..18245d591a 100644 ---- a/src/drmmode_driver.h -+++ b/src/drmmode_driver.h -@@ -106,6 +106,7 @@ extern struct drmmode_interface exynos_interface; - extern struct drmmode_interface pl111_interface; - extern struct drmmode_interface kirin_interface; - extern struct drmmode_interface sti_interface; -+extern struct drmmode_interface xilinx_interface; - - - #endif -diff --git a/src/drmmode_xilinx/drmmode_xilinx.c b/src/drmmode_xilinx/drmmode_xilinx.c -new file mode 100644 -index 0000000000..f4faceb0b4 ---- /dev/null -+++ b/src/drmmode_xilinx/drmmode_xilinx.c -@@ -0,0 +1,76 @@ -+/* -+ * Xilinx X11 ARMSOC driver -+ * -+ * Author: Hyun Woo Kwon <hyun.kwon@xilinx.com> -+ * -+ * Copyright (C) 2014 Xilinx, Inc. -+ * -+ * Based on drmmode_exynos.c -+ * -+ * Copyright © 2013 ARM Limited. -+ * -+ * Permission is hereby granted, free of charge, to any person obtaining a -+ * copy of this software and associated documentation files (the "Software"), -+ * to deal in the Software without restriction, including without limitation -+ * the rights to use, copy, modify, merge, publish, distribute, sublicense, -+ * and/or sell copies of the Software, and to permit persons to whom the -+ * Software is furnished to do so, subject to the following conditions: -+ * -+ * The above copyright notice and this permission notice (including the next -+ * paragraph) shall be included in all copies or substantial portions of the -+ * Software. -+ * -+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL -+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER -+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, -+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE -+ * SOFTWARE. -+ * -+ */ -+ -+#include <stdlib.h> -+ -+#include <drm.h> -+#include <xf86drm.h> -+ -+#include "../drmmode_driver.h" -+ -+static int create_custom_gem(int fd, struct armsoc_create_gem *create_gem) -+{ -+ struct drm_mode_create_dumb arg; -+ int ret; -+ -+ memset(&arg, 0, sizeof(arg)); -+ arg.height = create_gem->height; -+ arg.width = create_gem->width; -+ arg.bpp = create_gem->bpp; -+ -+ ret = drmIoctl(fd, DRM_IOCTL_MODE_CREATE_DUMB, &arg); -+ if (ret) -+ return ret; -+ -+ create_gem->height = arg.height; -+ create_gem->width = arg.width; -+ create_gem->bpp = arg.bpp; -+ create_gem->handle = arg.handle; -+ create_gem->pitch = arg.pitch; -+ create_gem->size = arg.size; -+ -+ return 0; -+} -+ -+struct drmmode_interface xilinx_interface = { -+ "xlnx" /* name of drm driver */, -+ 1 /* use_page_flip_events */, -+ 1 /* use_early_display */, -+ 0 /* cursor width */, -+ 0 /* cursor_height */, -+ 0 /* cursor padding */, -+ HWCURSOR_API_NONE /* cursor_api */, -+ NULL /* init_plane_for_cursor */, -+ 0 /* vblank_query_supported */, -+ create_custom_gem /* create_custom_gem */, -+}; -+ --- -2.11.0 - diff --git a/meta-xilinx-bsp/recipes-graphics/xorg-driver/xf86-video-armsoc_%.bbappend b/meta-xilinx-bsp/recipes-graphics/xorg-driver/xf86-video-armsoc_%.bbappend deleted file mode 100644 index 3ddcf0b8..00000000 --- a/meta-xilinx-bsp/recipes-graphics/xorg-driver/xf86-video-armsoc_%.bbappend +++ /dev/null @@ -1,3 +0,0 @@ -FILESEXTRAPATHS_prepend := "${THISDIR}/xf86-video-armsoc:" - -SRC_URI_append = " file://0001-src-drmmode_xilinx-Add-the-dumb-gem-support-for-Xili.patch" diff --git a/meta-xilinx-bsp/recipes-graphics/xorg-xserver/xserver-xf86-config/zynqmp/xorg.conf b/meta-xilinx-bsp/recipes-graphics/xorg-xserver/xserver-xf86-config/zynqmp/xorg.conf deleted file mode 100644 index 9ef39462..00000000 --- a/meta-xilinx-bsp/recipes-graphics/xorg-xserver/xserver-xf86-config/zynqmp/xorg.conf +++ /dev/null @@ -1,27 +0,0 @@ -Section "InputDevice" - Identifier "System Mouse" - Driver "mouse" - Option "Device" "/dev/input/mouse0" -EndSection - -Section "InputDevice" - Identifier "System Keyboard" - Driver "kbd" - Option "Device" "/dev/input/event0" -EndSection - -Section "Device" - Identifier "ZynqMP" - Driver "armsoc" - Option "DRI2" "true" - Option "DRI2_PAGE_FLIP" "false" - Option "DRI2_WAIT_VSYNC" "true" - Option "SWcursorLCD" "false" - Option "DEBUG" "false" -EndSection - -Section "Screen" - Identifier "DefaultScreen" - Device "ZynqMP" - DefaultDepth 16 -EndSection diff --git a/meta-xilinx-bsp/recipes-graphics/xorg-xserver/xserver-xf86-config_%.bbappend b/meta-xilinx-bsp/recipes-graphics/xorg-xserver/xserver-xf86-config_%.bbappend deleted file mode 100644 index 72d991c7..00000000 --- a/meta-xilinx-bsp/recipes-graphics/xorg-xserver/xserver-xf86-config_%.bbappend +++ /dev/null @@ -1 +0,0 @@ -FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:" diff --git a/meta-xilinx-bsp/recipes-kernel/linux/linux-microblaze.inc b/meta-xilinx-bsp/recipes-kernel/linux/linux-microblaze.inc deleted file mode 100644 index e23a50e8..00000000 --- a/meta-xilinx-bsp/recipes-kernel/linux/linux-microblaze.inc +++ /dev/null @@ -1,5 +0,0 @@ -# MicroBlaze is a uImage target, but its not called 'uImage' instead it is called 'linux.bin.ub' -python () { - if d.getVar('KERNEL_IMAGETYPE', True).endswith('.ub'): - d.setVar('DEPENDS', "%s u-boot-mkimage-native" % d.getVar('DEPENDS', True)) -} diff --git a/meta-xilinx-bsp/recipes-kernel/linux/linux-xlnx-dev.bb b/meta-xilinx-bsp/recipes-kernel/linux/linux-xlnx-dev.bb deleted file mode 100644 index acb9938f..00000000 --- a/meta-xilinx-bsp/recipes-kernel/linux/linux-xlnx-dev.bb +++ /dev/null @@ -1,18 +0,0 @@ -# This recipe tracks the 'bleeding edge' linux-xlnx repository. -# Since this tree is frequently updated, AUTOREV is used to track its contents. -# -# To enable this recipe, set PREFERRED_PROVIDER_virtual/kernel = "linux-xlnx-dev" - -KBRANCH ?= "master" - -# Use the SRCREV for the last tagged revision of linux-xlnx. -SRCREV ?= '${@oe.utils.conditional("PREFERRED_PROVIDER_virtual/kernel", "linux-xlnx-dev", "${AUTOREV}", "84fb0cc65aae5970471cbc54b0c89009b9b904af", d)}' - -# skip version sanity, because the version moves with AUTOREV -KERNEL_VERSION_SANITY_SKIP = "1" - -LINUX_VERSION ?= "4.9+" -LINUX_VERSION_EXTENSION ?= "-xilinx-dev" - -include linux-xlnx.inc - diff --git a/meta-xilinx-bsp/recipes-kernel/linux/linux-xlnx-dev.bbappend b/meta-xilinx-bsp/recipes-kernel/linux/linux-xlnx-dev.bbappend new file mode 100644 index 00000000..5f4db309 --- /dev/null +++ b/meta-xilinx-bsp/recipes-kernel/linux/linux-xlnx-dev.bbappend @@ -0,0 +1,3 @@ +# MicroBlaze BSP fragments +KERNEL_FEATURES:append:kc705-microblazeel = " bsp/xilinx/kc705-microblazeel-features/kc705-microblazeel-features.scc" + diff --git a/meta-xilinx-bsp/recipes-kernel/linux/linux-xlnx.inc b/meta-xilinx-bsp/recipes-kernel/linux/linux-xlnx.inc deleted file mode 100644 index 54ec3f21..00000000 --- a/meta-xilinx-bsp/recipes-kernel/linux/linux-xlnx.inc +++ /dev/null @@ -1,63 +0,0 @@ -# This version extension should match CONFIG_LOCALVERSION in defconfig -XILINX_RELEASE_VERSION ?= "" -LINUX_VERSION_EXTENSION ?= "-xilinx-${XILINX_RELEASE_VERSION}" -PV = "${LINUX_VERSION}${LINUX_VERSION_EXTENSION}+git${SRCPV}" - -# Sources, by default allow for the use of SRCREV pointing to orphaned tags/commits -KBRANCH ?= "" -SRCBRANCHARG = "${@['nobranch=1', 'branch=${KBRANCH}'][d.getVar('KBRANCH', True) != '']}" - -FILESOVERRIDES_append = ":${XILINX_RELEASE_VERSION}" -KERNELURI ?= "git://github.com/Xilinx/linux-xlnx.git;protocol=https" -SRC_URI = "${KERNELURI};${SRCBRANCHARG}" - -SRCREV_machine ?= "${SRCREV}" - -require recipes-kernel/linux/linux-yocto.inc -require linux-microblaze.inc - -DESCRIPTION = "Xilinx Kernel" -LIC_FILES_CHKSUM = "file://COPYING;md5=bbea815ee2795b2f4230826c0c6b8814" - -EXTKERNELSRC = "${@'1' if d.getVar('EXTERNALSRC') else ''}" - -# Force the use of the KBUILD_DEFCONFIG even if some other defconfig was generated in the ${WORKDIR} -do_kernel_metadata_prepend () { - [ -n "${KBUILD_DEFCONFIG}" ] && [ -e ${WORKDIR}/defconfig ] && rm ${WORKDIR}/defconfig -} - -do_configure_prepend () { - if [ -n "${KBUILD_DEFCONFIG}" ] && [ -n "${EXTKERNELSRC}" ]; then - cp ${S}/arch/${ARCH}/configs/${KBUILD_DEFCONFIG} ${WORKDIR}/defconfig - fi -} - -inherit kernel-simpleimage - -# Default to be only compatible with specific machines or soc families -COMPATIBLE_MACHINE ?= "^$" -COMPATIBLE_MACHINE_zynq = ".*" -COMPATIBLE_MACHINE_zynqmp = ".*" -COMPATIBLE_MACHINE_microblaze = ".*" -COMPATIBLE_MACHINE_versal = ".*" - -# Use DEFCONFIGs for configuring linux-xlnx kernels -KCONFIG_MODE ?= "alldefconfig" -KBUILD_DEFCONFIG_zynqmp = "xilinx_zynqmp_defconfig" -KBUILD_DEFCONFIG_zynq = "xilinx_zynq_defconfig" -KBUILD_DEFCONFIG_microblaze = "mmu_defconfig" -KBUILD_DEFCONFIG_versal = "xilinx_versal_defconfig" - -# Add meta-xilinx kmeta, used for MicroBlaze BSP fragments -FILESEXTRAPATHS_prepend := "${THISDIR}:" -SRC_URI_append = " file://xilinx-kmeta;type=kmeta;name=xilinx-kmeta;destsuffix=xilinx-kmeta" - -# MicroBlaze BSP fragments -KERNEL_FEATURES_append_kc705-microblazeel = " bsp/kc705-microblazeel/kc705-microblazeel.scc" - -KERNEL_FEATURES_append_zynqmp = "${@bb.utils.contains('DISTRO_FEATURES', 'xen', ' bsp/xilinx/xen.scc', '', d)}" - -KERNEL_FEATURES_append_zynqmp = "${@' features/overlay/overlay.scc' if d.getVar('FPGA_MNGR_RECONFIG_ENABLE') == '1' else ''}" - -KERNEL_FEATURES_append_versal = "${@bb.utils.contains('DISTRO_FEATURES', 'xen', ' bsp/xilinx/xen.scc', '', d)}" - diff --git a/meta-xilinx-bsp/recipes-kernel/linux/linux-xlnx/linux-xlnx-bsp-kmeta/bsp/ac701-microblazeel/ac701-microblazeel.cfg b/meta-xilinx-bsp/recipes-kernel/linux/linux-xlnx/linux-xlnx-bsp-kmeta/bsp/ac701-microblazeel/ac701-microblazeel.cfg new file mode 100644 index 00000000..05452ce9 --- /dev/null +++ b/meta-xilinx-bsp/recipes-kernel/linux/linux-xlnx/linux-xlnx-bsp-kmeta/bsp/ac701-microblazeel/ac701-microblazeel.cfg @@ -0,0 +1,19 @@ +# SPDX-License-Identifier: MIT + +#........................................................................ +# WARNING +# +# This file is a kernel configuration fragment, and not a full kernel +# configuration file. The final kernel configuration is made up of +# an assembly of processed fragments, each of which is designed to +# capture a specific part of the final configuration (e.g. platform +# configuration, feature configuration, and board specific hardware +# configuration). For more information on kernel configuration, please +# refer the product documentation. +# +#........................................................................ + +# +# Definitions for MICROBLAZE +# +CONFIG_XILINX_MICROBLAZE0_FAMILY="artix7" diff --git a/meta-xilinx-bsp/recipes-kernel/linux/linux-xlnx/linux-xlnx-bsp-kmeta/bsp/ac701-microblazeel/ac701-microblazeel.scc b/meta-xilinx-bsp/recipes-kernel/linux/linux-xlnx/linux-xlnx-bsp-kmeta/bsp/ac701-microblazeel/ac701-microblazeel.scc new file mode 100644 index 00000000..6d551461 --- /dev/null +++ b/meta-xilinx-bsp/recipes-kernel/linux/linux-xlnx/linux-xlnx-bsp-kmeta/bsp/ac701-microblazeel/ac701-microblazeel.scc @@ -0,0 +1,6 @@ +# SPDX-License-Identifier: MIT + +define KFEATURE_DESCRIPTION "Kernel Config for AC701 machine BSP" +define KFEATURE_COMPATIBILITY AC701 board + +kconf hardware ac701-microblazeel.cfg diff --git a/meta-xilinx-bsp/recipes-kernel/linux/linux-xlnx/linux-xlnx-bsp-kmeta/bsp/vcu118-microblazeel/vcu118-microblazeel.cfg b/meta-xilinx-bsp/recipes-kernel/linux/linux-xlnx/linux-xlnx-bsp-kmeta/bsp/vcu118-microblazeel/vcu118-microblazeel.cfg new file mode 100644 index 00000000..c25a48e1 --- /dev/null +++ b/meta-xilinx-bsp/recipes-kernel/linux/linux-xlnx/linux-xlnx-bsp-kmeta/bsp/vcu118-microblazeel/vcu118-microblazeel.cfg @@ -0,0 +1,19 @@ +# SPDX-License-Identifier: MIT + +#........................................................................ +# WARNING +# +# This file is a kernel configuration fragment, and not a full kernel +# configuration file. The final kernel configuration is made up of +# an assembly of processed fragments, each of which is designed to +# capture a specific part of the final configuration (e.g. platform +# configuration, feature configuration, and board specific hardware +# configuration). For more information on kernel configuration, please +# refer the product documentation. +# +#........................................................................ + +# +# Definitions for MICROBLAZE +# +CONFIG_XILINX_MICROBLAZE0_FAMILY="virtexuplus" diff --git a/meta-xilinx-bsp/recipes-kernel/linux/linux-xlnx/linux-xlnx-bsp-kmeta/bsp/vcu118-microblazeel/vcu118-microblazeel.scc b/meta-xilinx-bsp/recipes-kernel/linux/linux-xlnx/linux-xlnx-bsp-kmeta/bsp/vcu118-microblazeel/vcu118-microblazeel.scc new file mode 100644 index 00000000..29261805 --- /dev/null +++ b/meta-xilinx-bsp/recipes-kernel/linux/linux-xlnx/linux-xlnx-bsp-kmeta/bsp/vcu118-microblazeel/vcu118-microblazeel.scc @@ -0,0 +1,6 @@ +# SPDX-License-Identifier: MIT + +define KFEATURE_DESCRIPTION "Kernel Config for VCU118 machine BSP" +define KFEATURE_COMPATIBILITY VCU118 board + +kconf hardware vcu118-microblazeel.cfg diff --git a/meta-xilinx-bsp/recipes-kernel/linux/linux-xlnx_%.bbappend b/meta-xilinx-bsp/recipes-kernel/linux/linux-xlnx_%.bbappend new file mode 100644 index 00000000..627f6661 --- /dev/null +++ b/meta-xilinx-bsp/recipes-kernel/linux/linux-xlnx_%.bbappend @@ -0,0 +1,10 @@ +FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}:" + +SRC_URI:append = " \ + file://linux-xlnx-bsp-kmeta;type=kmeta;name=linux-xlnx-bsp-kmeta;destsuffix=linux-xlnx-bsp-kmeta \ + " + +# MicroBlaze BSP fragments +KERNEL_FEATURES:append:kc705-microblazeel = " bsp/xilinx/kc705-microblazeel-features/kc705-microblazeel-features.scc" +KERNEL_FEATURES:append:ac701-microblazeel = " bsp/ac701-microblazeel/ac701-microblazeel.scc" +KERNEL_FEATURES:append:vcu118-microblazeel = " bsp/vcu118-microblazeel/vcu118-microblazeel.scc" diff --git a/meta-xilinx-bsp/recipes-kernel/linux/linux-xlnx_2019.1.bb b/meta-xilinx-bsp/recipes-kernel/linux/linux-xlnx_2019.1.bb deleted file mode 100644 index 5bac31e9..00000000 --- a/meta-xilinx-bsp/recipes-kernel/linux/linux-xlnx_2019.1.bb +++ /dev/null @@ -1,7 +0,0 @@ -LINUX_VERSION = "4.19" -XILINX_RELEASE_VERSION = "v2019.1" -KBRANCH ?= "xlnx_rebase_v4.19" -SRCREV ?= "9811303824b66a8db9a8ec61b570879336a9fde5" - -include linux-xlnx.inc - diff --git a/meta-xilinx-bsp/recipes-kernel/linux/linux-yocto-dev.bbappend b/meta-xilinx-bsp/recipes-kernel/linux/linux-yocto-dev.bbappend index 05c39951..0233531d 100644 --- a/meta-xilinx-bsp/recipes-kernel/linux/linux-yocto-dev.bbappend +++ b/meta-xilinx-bsp/recipes-kernel/linux/linux-yocto-dev.bbappend @@ -1 +1,7 @@ -require linux-yocto-xilinx.inc +# MicroBlaze KMACHINEs +KMACHINE:ml605-qemu-microblazeel = "qemumicroblazeel" +KMACHINE:s3adsp1800-qemu-microblazeeb = "qemumicroblazeeb" + +# Default kernel config fragements for specific machines +KERNEL_FEATURES:append:kc705-microblazeel = " bsp/xilinx/kc705-microblazeel-features/kc705-microblazeel-features.scc" + diff --git a/meta-xilinx-bsp/recipes-kernel/linux/linux-yocto-tiny_%.bbappend b/meta-xilinx-bsp/recipes-kernel/linux/linux-yocto-tiny_%.bbappend index 05c39951..0233531d 100644 --- a/meta-xilinx-bsp/recipes-kernel/linux/linux-yocto-tiny_%.bbappend +++ b/meta-xilinx-bsp/recipes-kernel/linux/linux-yocto-tiny_%.bbappend @@ -1 +1,7 @@ -require linux-yocto-xilinx.inc +# MicroBlaze KMACHINEs +KMACHINE:ml605-qemu-microblazeel = "qemumicroblazeel" +KMACHINE:s3adsp1800-qemu-microblazeeb = "qemumicroblazeeb" + +# Default kernel config fragements for specific machines +KERNEL_FEATURES:append:kc705-microblazeel = " bsp/xilinx/kc705-microblazeel-features/kc705-microblazeel-features.scc" + diff --git a/meta-xilinx-bsp/recipes-kernel/linux/linux-yocto-xilinx.inc b/meta-xilinx-bsp/recipes-kernel/linux/linux-yocto-xilinx.inc deleted file mode 100644 index 92093008..00000000 --- a/meta-xilinx-bsp/recipes-kernel/linux/linux-yocto-xilinx.inc +++ /dev/null @@ -1,25 +0,0 @@ -require linux-microblaze.inc - -# Add meta-xilinx kmeta -FILESEXTRAPATHS_prepend := "${THISDIR}:" -SRC_URI_append = " file://xilinx-kmeta;type=kmeta;name=xilinx-kmeta;destsuffix=xilinx-kmeta" - -# Zynq default generic KMACHINE -COMPATIBLE_MACHINE_zynq = "zynq" -KMACHINE_zynq = "zynq" - -# ZynqMP default generic KMACHINE -COMPATIBLE_MACHINE_zynqmp = "zynqmp" -KMACHINE_zynqmp = "zynqmp" - -# MicroBlaze KMACHINEs -KMACHINE_ml605-qemu-microblazeel = "qemumicroblazeel" -KMACHINE_s3adsp1800-qemu-microblazeeb = "qemumicroblazeeb" - -# MicroBlaze default generic KMACHINE -KMACHINE_microblaze = "microblaze" -COMPATIBLE_MACHINE_microblaze = "microblaze" - -# Default kernel config fragements for specific machines -KERNEL_FEATURES_append_kc705-microblazeel = " bsp/kc705-microblazeel/kc705-microblazeel.scc" - diff --git a/meta-xilinx-bsp/recipes-kernel/linux/linux-yocto_%.bbappend b/meta-xilinx-bsp/recipes-kernel/linux/linux-yocto_%.bbappend index 05c39951..0233531d 100644 --- a/meta-xilinx-bsp/recipes-kernel/linux/linux-yocto_%.bbappend +++ b/meta-xilinx-bsp/recipes-kernel/linux/linux-yocto_%.bbappend @@ -1 +1,7 @@ -require linux-yocto-xilinx.inc +# MicroBlaze KMACHINEs +KMACHINE:ml605-qemu-microblazeel = "qemumicroblazeel" +KMACHINE:s3adsp1800-qemu-microblazeeb = "qemumicroblazeeb" + +# Default kernel config fragements for specific machines +KERNEL_FEATURES:append:kc705-microblazeel = " bsp/xilinx/kc705-microblazeel-features/kc705-microblazeel-features.scc" + diff --git a/meta-xilinx-bsp/recipes-kernel/linux/xilinx-kmeta/bsp/kc705-microblazeel/kc705-microblazeel.cfg b/meta-xilinx-bsp/recipes-kernel/linux/xilinx-kmeta/bsp/kc705-microblazeel/kc705-microblazeel.cfg deleted file mode 100644 index ef6fd6a8..00000000 --- a/meta-xilinx-bsp/recipes-kernel/linux/xilinx-kmeta/bsp/kc705-microblazeel/kc705-microblazeel.cfg +++ /dev/null @@ -1,17 +0,0 @@ -CONFIG_XILINX_MICROBLAZE0_FAMILY="kintex7" - -# CPU ISA Config -CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1 -CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR=1 -CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1 -CONFIG_XILINX_MICROBLAZE0_USE_DIV=1 -CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=2 -CONFIG_XILINX_MICROBLAZE0_USE_FPU=0 -CONFIG_XILINX_MICROBLAZE0_HW_VER="11.0" - -# Memory Base Address -CONFIG_KERNEL_BASE_ADDR=0x80000000 - -CONFIG_XILINX_AXI_EMAC=y -CONFIG_XILINX_PHY=y -CONFIG_BLK_DEV_INITRD=y diff --git a/meta-xilinx-bsp/recipes-kernel/linux/xilinx-kmeta/bsp/kc705-microblazeel/kc705-microblazeel.scc b/meta-xilinx-bsp/recipes-kernel/linux/xilinx-kmeta/bsp/kc705-microblazeel/kc705-microblazeel.scc deleted file mode 100644 index aaf7c2af..00000000 --- a/meta-xilinx-bsp/recipes-kernel/linux/xilinx-kmeta/bsp/kc705-microblazeel/kc705-microblazeel.scc +++ /dev/null @@ -1,4 +0,0 @@ -define KFEATURE_DESCRIPTION "Kernel Config for kc705-microblazeel specific setup" -define KFEATURE_COMPATIBILITY board - -kconf hardware kc705-microblazeel.cfg diff --git a/meta-xilinx-bsp/recipes-kernel/linux/xilinx-kmeta/bsp/xilinx/microblaze-standard.scc b/meta-xilinx-bsp/recipes-kernel/linux/xilinx-kmeta/bsp/xilinx/microblaze-standard.scc deleted file mode 100644 index 170489d4..00000000 --- a/meta-xilinx-bsp/recipes-kernel/linux/xilinx-kmeta/bsp/xilinx/microblaze-standard.scc +++ /dev/null @@ -1,14 +0,0 @@ -define KMACHINE microblaze -define KTYPE standard -define KARCH microblaze - -include ktypes/standard/standard.scc - -include bsp/xilinx/soc/microblaze.scc - -# Common board drivers -include bsp/xilinx/board-common.scc - -# default policy for standard kernels -include features/latencytop/latencytop.scc -include features/profiling/profiling.scc diff --git a/meta-xilinx-bsp/recipes-kernel/linux/xilinx-kmeta/bsp/xilinx/microblaze-tiny.scc b/meta-xilinx-bsp/recipes-kernel/linux/xilinx-kmeta/bsp/xilinx/microblaze-tiny.scc deleted file mode 100644 index 979fb86b..00000000 --- a/meta-xilinx-bsp/recipes-kernel/linux/xilinx-kmeta/bsp/xilinx/microblaze-tiny.scc +++ /dev/null @@ -1,11 +0,0 @@ -define KMACHINE microblaze -define KTYPE tiny -define KARCH microblaze - -include ktypes/tiny/tiny.scc - -include bsp/xilinx/soc/microblaze.scc - -# Common board drivers -include bsp/xilinx/board-common.scc - diff --git a/meta-xilinx-bsp/recipes-kernel/linux/xilinx-kmeta/bsp/xilinx/soc/drivers-drm.cfg b/meta-xilinx-bsp/recipes-kernel/linux/xilinx-kmeta/bsp/xilinx/soc/drivers-drm.cfg deleted file mode 100644 index 0f66c8bc..00000000 --- a/meta-xilinx-bsp/recipes-kernel/linux/xilinx-kmeta/bsp/xilinx/soc/drivers-drm.cfg +++ /dev/null @@ -1,14 +0,0 @@ -# CMA -CONFIG_CMA=y -CONFIG_DMA_CMA=y -CONFIG_CMA_SIZE_MBYTES=128 -CONFIG_CMA_SIZE_SEL_MBYTES=y -CONFIG_CMA_ALIGNMENT=8 - -# DRM -CONFIG_DRM=y -CONFIG_DRM_XILINX=y - -# frame buffer console -CONFIG_FRAMEBUFFER_CONSOLE=y - diff --git a/meta-xilinx-bsp/recipes-kernel/linux/xilinx-kmeta/bsp/xilinx/soc/drivers-drm.scc b/meta-xilinx-bsp/recipes-kernel/linux/xilinx-kmeta/bsp/xilinx/soc/drivers-drm.scc deleted file mode 100644 index 56c80c3a..00000000 --- a/meta-xilinx-bsp/recipes-kernel/linux/xilinx-kmeta/bsp/xilinx/soc/drivers-drm.scc +++ /dev/null @@ -1,4 +0,0 @@ -define KFEATURE_DESCRIPTION "Enable Xilinx DRM support" -define KFEATURE_COMPATIBILITY board - -kconfig hardware drivers-drm.cfg diff --git a/meta-xilinx-bsp/recipes-kernel/linux/xilinx-kmeta/bsp/xilinx/soc/drivers-softip-pcie.cfg b/meta-xilinx-bsp/recipes-kernel/linux/xilinx-kmeta/bsp/xilinx/soc/drivers-softip-pcie.cfg deleted file mode 100644 index df88fce7..00000000 --- a/meta-xilinx-bsp/recipes-kernel/linux/xilinx-kmeta/bsp/xilinx/soc/drivers-softip-pcie.cfg +++ /dev/null @@ -1,7 +0,0 @@ - -# PCIe -CONFIG_PCI=y -CONFIG_PCI_MSI=y -CONFIG_PCIEPORTBUS=y -CONFIG_PCIE_XILINX=y - diff --git a/meta-xilinx-bsp/recipes-kernel/linux/xilinx-kmeta/bsp/xilinx/soc/drivers-softip-pcie.scc b/meta-xilinx-bsp/recipes-kernel/linux/xilinx-kmeta/bsp/xilinx/soc/drivers-softip-pcie.scc deleted file mode 100644 index e60047ae..00000000 --- a/meta-xilinx-bsp/recipes-kernel/linux/xilinx-kmeta/bsp/xilinx/soc/drivers-softip-pcie.scc +++ /dev/null @@ -1,5 +0,0 @@ -define KFEATURE_DESCRIPTION "Xilinx AXI PCIe Host Bridge" -define KFEATURE_COMPATIBILITY board - -kconfig hardware drivers-softip-pcie.cfg - diff --git a/meta-xilinx-bsp/recipes-kernel/linux/xilinx-kmeta/bsp/xilinx/soc/drivers-xlnx-softip.cfg b/meta-xilinx-bsp/recipes-kernel/linux/xilinx-kmeta/bsp/xilinx/soc/drivers-xlnx-softip.cfg deleted file mode 100644 index 5c2529a2..00000000 --- a/meta-xilinx-bsp/recipes-kernel/linux/xilinx-kmeta/bsp/xilinx/soc/drivers-xlnx-softip.cfg +++ /dev/null @@ -1,19 +0,0 @@ -# Xilinx DMA engines -CONFIG_XILINX_DMA_ENGINES=y - -# Xilinx Traffic Generator -CONFIG_XILINX_TRAFGEN=y - -# Xilinx Perfmon UIO driver -CONFIG_UIO_XILINX_APM=y - -# Interrupt controller -CONFIG_XILINX_INTC=y - -# Xilinx PHY -CONFIG_XILINX_PHY=y - -# JESD204B PHY -CONFIG_XILINX_JESD204B=y -CONFIG_XILINX_JESD204B_PHY=y - diff --git a/meta-xilinx-bsp/recipes-kernel/linux/xilinx-kmeta/bsp/xilinx/soc/drivers-xlnx-zynq.cfg b/meta-xilinx-bsp/recipes-kernel/linux/xilinx-kmeta/bsp/xilinx/soc/drivers-xlnx-zynq.cfg deleted file mode 100644 index 9b70ac4e..00000000 --- a/meta-xilinx-bsp/recipes-kernel/linux/xilinx-kmeta/bsp/xilinx/soc/drivers-xlnx-zynq.cfg +++ /dev/null @@ -1,16 +0,0 @@ -# Devcfg -CONFIG_XILINX_DEVCFG=y - -# Ethernet -CONFIG_XILINX_PS_EMAC=y - -# SPI -CONFIG_SPI_ZYNQ_QSPI=y - -# NAND -CONFIG_MTD_NAND_PL353=y -CONFIG_MTD_NAND_PL35X=y - -# FPGA -CONFIG_XILINX_PR_DECOUPLER=y - diff --git a/meta-xilinx-bsp/recipes-kernel/linux/xilinx-kmeta/bsp/xilinx/soc/drivers-xlnx-zynqmp.cfg b/meta-xilinx-bsp/recipes-kernel/linux/xilinx-kmeta/bsp/xilinx/soc/drivers-xlnx-zynqmp.cfg deleted file mode 100644 index 4cbb2050..00000000 --- a/meta-xilinx-bsp/recipes-kernel/linux/xilinx-kmeta/bsp/xilinx/soc/drivers-xlnx-zynqmp.cfg +++ /dev/null @@ -1,67 +0,0 @@ -CONFIG_SOC_XILINX_ZYNQMP=y - -# PMU Firmware API -CONFIG_ZYNQMP_PM_API_DEBUGFS=y - -# DMA -CONFIG_DMADEVICES=y -CONFIG_XILINX_DMA_ENGINES=y -CONFIG_XILINX_DPDMA=y - -# NAND -CONFIG_MTD=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ARASAN=y - -# PCIe -CONFIG_PCI=y -CONFIG_PCI_MSI=y -CONFIG_PCIE_XILINX_NWL=y - -# CONFIG_ARM_MALI is not set - -CONFIG_PHY_XILINX_ZYNQMP=y - -# EDAC -CONFIG_EDAC=y -CONFIG_EDAC_MM_EDAC=y -CONFIG_EDAC_CORTEX_ARM64=y -CONFIG_EDAC_SYNOPSYS=y -CONFIG_EDAC_ZYNQMP_OCM=y - -# Sound -CONFIG_SOUND=y -CONFIG_SND=y -CONFIG_SND_DRIVERS=y -CONFIG_SND_SOC=y -CONFIG_SND_SOC_XILINX_DP=y - -# Ethernet -CONFIG_MACB_EXT_BD=y - -# FPGA -CONFIG_FPGA=y -CONFIG_FPGA_MGR_ZYNQMP_FPGA=y -CONFIG_FPGA_REGION=y -CONFIG_FPGA_BRIDGE=y -CONFIG_XILINX_PR_DECOUPLER=y - -# AMS -CONFIG_XILINX_AMS=y - -# NVMEM -CONFIG_NVMEM=y -CONFIG_NVMEM_ZYNQMP=y - -# Fabric Clock -CONFIG_STAGING=y -CONFIG_XILINX_FCLK=y - -# Clock controllers -CONFIG_COMMON_CLK=y -CONFIG_COMMON_CLK_ZYNQMP=y - -# Reset controller -CONFIG_RESET_CONTROLLER=y -CONFIG_ZYNQMP_RESET_CONTROLLER=y - diff --git a/meta-xilinx-bsp/recipes-kernel/linux/xilinx-kmeta/bsp/xilinx/soc/drivers-zynqmp.cfg b/meta-xilinx-bsp/recipes-kernel/linux/xilinx-kmeta/bsp/xilinx/soc/drivers-zynqmp.cfg deleted file mode 100644 index dc69a659..00000000 --- a/meta-xilinx-bsp/recipes-kernel/linux/xilinx-kmeta/bsp/xilinx/soc/drivers-zynqmp.cfg +++ /dev/null @@ -1,68 +0,0 @@ - -# Bus -CONFIG_ARM_CCI400_PMU=y - -# IOMMU -CONFIG_IOMMU_SUPPORT=y -CONFIG_ARM_SMMU=y - -# Serial -CONFIG_TTY=y -CONFIG_SERIAL_EARLYCON=y -CONFIG_SERIAL_XILINX_PS_UART=y -CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y - -# Watchdog -CONFIG_WATCHDOG=y -CONFIG_CADENCE_WATCHDOG=y - -# RTC -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_ZYNQMP=y - -# Ethernet -CONFIG_NET_CADENCE=y -CONFIG_MACB=y - -# GPIO -CONFIG_GPIOLIB=y -CONFIG_GPIO_SYSFS=y -CONFIG_GPIO_ZYNQ=y - -# I2C -CONFIG_I2C=y -CONFIG_I2C_CADENCE=y - -# SPI -CONFIG_SPI=y -CONFIG_SPI_CADENCE=y -CONFIG_SPI_ZYNQMP_GQSPI=y - -# CAN -CONFIG_CAN=y -CONFIG_CAN_DEV=y -CONFIG_CAN_XILINXCAN=y - -# SATA -CONFIG_ATA=y -CONFIG_ATA_SFF=y -CONFIG_SATA_AHCI_PLATFORM=y -CONFIG_AHCI_CEVA=y - -# MMC/SD -CONFIG_MMC=y -CONFIG_MMC_SDHCI=y -CONFIG_MMC_SDHCI_PLTFM=y -CONFIG_MMC_SDHCI_OF_ARASAN=y - -# USB -CONFIG_USB=y -CONFIG_USB_SUPPORT=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_DWC3=y -CONFIG_USB_GADGET=y - -# DMA -CONFIG_DMA_ENGINE=y -CONFIG_XILINX_ZYNQMP_DMA=y - diff --git a/meta-xilinx-bsp/recipes-kernel/linux/xilinx-kmeta/bsp/xilinx/soc/zynqmp.cfg b/meta-xilinx-bsp/recipes-kernel/linux/xilinx-kmeta/bsp/xilinx/soc/zynqmp.cfg deleted file mode 100644 index 072a3feb..00000000 --- a/meta-xilinx-bsp/recipes-kernel/linux/xilinx-kmeta/bsp/xilinx/soc/zynqmp.cfg +++ /dev/null @@ -1,26 +0,0 @@ - -# Arch Feature Selections -CONFIG_ARM64=y -CONFIG_64BIT=y -CONFIG_ARCH_ZYNQMP=y - -# SMP -CONFIG_SMP=y - -# ARM 32-Bit compatiblity -CONFIG_COMPAT=y -# CONFIG_COMPAT_BRK is not set - -# CPU Frequency -CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_STAT=y -CONFIG_CPU_FREQ_STAT_DETAILS=y -CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y -CONFIG_CPU_FREQ_GOV_PERFORMANCE=y -CONFIG_CPU_FREQ_GOV_POWERSAVE=y -CONFIG_CPU_FREQ_GOV_ONDEMAND=y -CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y -CONFIG_CPUFREQ_DT=y -CONFIG_CPU_IDLE=y -CONFIG_ARM_CPUIDLE=y - diff --git a/meta-xilinx-bsp/recipes-kernel/linux/xilinx-kmeta/bsp/xilinx/soc/zynqmp.scc b/meta-xilinx-bsp/recipes-kernel/linux/xilinx-kmeta/bsp/xilinx/soc/zynqmp.scc deleted file mode 100644 index 8fcb8e62..00000000 --- a/meta-xilinx-bsp/recipes-kernel/linux/xilinx-kmeta/bsp/xilinx/soc/zynqmp.scc +++ /dev/null @@ -1,10 +0,0 @@ -define KFEATURE_DESCRIPTION "Xilinx Zynq UltraScale+ MPSoC" -define KFEATURE_COMPATIBILITY board - -include features/net/net.scc -include cfg/timer/no_hz.scc - -kconf hardware zynqmp.cfg -kconf hardware drivers-zynqmp.cfg -include bsp/xilinx/soc/drivers-softip.scc - diff --git a/meta-xilinx-bsp/recipes-kernel/linux/xilinx-kmeta/bsp/xilinx/xen.cfg b/meta-xilinx-bsp/recipes-kernel/linux/xilinx-kmeta/bsp/xilinx/xen.cfg deleted file mode 100644 index 50d5e462..00000000 --- a/meta-xilinx-bsp/recipes-kernel/linux/xilinx-kmeta/bsp/xilinx/xen.cfg +++ /dev/null @@ -1,45 +0,0 @@ -CONFIG_HYPERVISOR_GUEST=y -CONFIG_PARAVIRT=y -CONFIG_XEN=y -CONFIG_XEN_DOM0=y -CONFIG_XEN_PVHVM=y -CONFIG_XEN_SAVE_RESTORE=y -# CONFIG_XEN_DEBUG_FS is not set -CONFIG_MMU_NOTIFIER=y -CONFIG_HIBERNATE_CALLBACKS=y -CONFIG_PCI_XEN=y -CONFIG_XEN_PCIDEV_FRONTEND=y -CONFIG_SYS_HYPERVISOR=y -CONFIG_XEN_BLKDEV_FRONTEND=y -CONFIG_XEN_BLKDEV_BACKEND=m -CONFIG_XEN_SCSI_FRONTEND=m -CONFIG_XEN_NETDEV_FRONTEND=y -CONFIG_XEN_NETDEV_BACKEND=m -CONFIG_INPUT_MISC=y -CONFIG_INPUT_XEN_KBDDEV_FRONTEND=y -CONFIG_HVC_IRQ=y -CONFIG_HVC_XEN=y -CONFIG_HVC_XEN_FRONTEND=y -CONFIG_XEN_WDT=m -CONFIG_FB_SYS_FILLRECT=y -CONFIG_FB_SYS_COPYAREA=y -CONFIG_FB_SYS_IMAGEBLIT=y -CONFIG_FB_SYS_FOPS=y -CONFIG_FB_DEFERRED_IO=y -CONFIG_XEN_FBDEV_FRONTEND=y -CONFIG_XEN_BALLOON=y -CONFIG_XEN_SCRUB_PAGES=y -CONFIG_XEN_DEV_EVTCHN=y -CONFIG_XEN_BACKEND=y -CONFIG_XENFS=y -CONFIG_XEN_COMPAT_XENFS=y -CONFIG_XEN_SYS_HYPERVISOR=y -CONFIG_XEN_XENBUS_FRONTEND=y -CONFIG_XEN_GNTDEV=m -CONFIG_XEN_GRANT_DEV_ALLOC=m -CONFIG_SWIOTLB_XEN=y -CONFIG_XEN_PCIDEV_BACKEND=m -CONFIG_XEN_PRIVCMD=y -CONFIG_XEN_ACPI_PROCESSOR=m -CONFIG_XEN_MCE_LOG=y -CONFIG_XEN_HAVE_PVMMU=y diff --git a/meta-xilinx-bsp/recipes-kernel/linux/xilinx-kmeta/bsp/xilinx/xen.scc b/meta-xilinx-bsp/recipes-kernel/linux/xilinx-kmeta/bsp/xilinx/xen.scc deleted file mode 100644 index b588e5df..00000000 --- a/meta-xilinx-bsp/recipes-kernel/linux/xilinx-kmeta/bsp/xilinx/xen.scc +++ /dev/null @@ -1,4 +0,0 @@ -define KFEATURE_DESCRIPTION "Xen Kernel Support" -define KFEATURE_COMPATIBILITY arch - -kconf non-hardware xen.cfg diff --git a/meta-xilinx-bsp/recipes-kernel/linux/xilinx-kmeta/bsp/xilinx/zynqmp-standard.scc b/meta-xilinx-bsp/recipes-kernel/linux/xilinx-kmeta/bsp/xilinx/zynqmp-standard.scc deleted file mode 100644 index 1c9a4f3d..00000000 --- a/meta-xilinx-bsp/recipes-kernel/linux/xilinx-kmeta/bsp/xilinx/zynqmp-standard.scc +++ /dev/null @@ -1,15 +0,0 @@ -define KMACHINE zynqmp -define KTYPE standard -define KARCH arm64 - -include ktypes/standard/standard.scc - -include bsp/xilinx/soc/zynqmp.scc -include bsp/xilinx/board-common.scc - -include features/input/input.scc -include cfg/usb-mass-storage.scc - -# default policy for standard kernels -#include features/latencytop/latencytop.scc -#include features/profiling/profiling.scc diff --git a/meta-xilinx-bsp/recipes-kernel/linux/xilinx-kmeta/bsp/xilinx/zynqmp-tiny.scc b/meta-xilinx-bsp/recipes-kernel/linux/xilinx-kmeta/bsp/xilinx/zynqmp-tiny.scc deleted file mode 100644 index 6cdfc723..00000000 --- a/meta-xilinx-bsp/recipes-kernel/linux/xilinx-kmeta/bsp/xilinx/zynqmp-tiny.scc +++ /dev/null @@ -1,9 +0,0 @@ -define KMACHINE zynqmp -define KTYPE tiny -define KARCH arm64 - -include ktypes/tiny/tiny.scc - -include bsp/xilinx/soc/zynqmp.scc -include bsp/xilinx/board-common.scc - diff --git a/meta-xilinx-bsp/recipes-kernel/linux/xilinx-kmeta/bsp/zybo-linux-bd-zynq7/zybo-linux-bd-zynq7.cfg b/meta-xilinx-bsp/recipes-kernel/linux/xilinx-kmeta/bsp/zybo-linux-bd-zynq7/zybo-linux-bd-zynq7.cfg deleted file mode 100644 index 37eaa4cf..00000000 --- a/meta-xilinx-bsp/recipes-kernel/linux/xilinx-kmeta/bsp/zybo-linux-bd-zynq7/zybo-linux-bd-zynq7.cfg +++ /dev/null @@ -1,19 +0,0 @@ -# Keyboard GPIO support -CONFIG_KEYBOARD_GPIO=y -CONFIG_KEYBOARD_GPIO_POLLED=y - -# Sound support for Zybo linux_bd project -CONFIG_SOUND=y -CONFIG_SND=y -CONFIG_SND_SOC=y -CONFIG_SND_SOC_ADI=y -CONFIG_SND_SOC_ADI_AXI_I2S=y -CONFIG_SND_SIMPLE_CARD=y -CONFIG_SND_SOC_SSM2602_I2C=y - -# Drivers for Digilent DRM encoder -# DRM encoder -CONFIG_DRM_DIGILENT_ENCODER=y -# Common Clock Framework -CONFIG_COMMON_CLK_DGLNT_DYNCLK=y - diff --git a/meta-xilinx-bsp/recipes-kernel/linux/xilinx-kmeta/bsp/zybo-linux-bd-zynq7/zybo-linux-bd-zynq7.scc b/meta-xilinx-bsp/recipes-kernel/linux/xilinx-kmeta/bsp/zybo-linux-bd-zynq7/zybo-linux-bd-zynq7.scc deleted file mode 100644 index f3e6e8b8..00000000 --- a/meta-xilinx-bsp/recipes-kernel/linux/xilinx-kmeta/bsp/zybo-linux-bd-zynq7/zybo-linux-bd-zynq7.scc +++ /dev/null @@ -1,7 +0,0 @@ -define KFEATURE_DESCRIPTION "Kernel Config for ZYBO Linux-BD Design" -define KFEATURE_COMPATIBILITY board - -kconf hardware zybo-linux-bd-zynq7.cfg - -include bsp/xilinx/soc/drivers-drm.scc - diff --git a/meta-xilinx-bsp/recipes-kernel/linux/xilinx-kmeta/features/overlay/overlay.cfg b/meta-xilinx-bsp/recipes-kernel/linux/xilinx-kmeta/features/overlay/overlay.cfg deleted file mode 100644 index 44462beb..00000000 --- a/meta-xilinx-bsp/recipes-kernel/linux/xilinx-kmeta/features/overlay/overlay.cfg +++ /dev/null @@ -1,3 +0,0 @@ -# Device Tree support -CONFIG_OF_CONFIGFS=y -CONFIG_OF_OVERLAY=y diff --git a/meta-xilinx-bsp/recipes-kernel/linux/xilinx-kmeta/features/overlay/overlay.scc b/meta-xilinx-bsp/recipes-kernel/linux/xilinx-kmeta/features/overlay/overlay.scc deleted file mode 100644 index 14f05ff4..00000000 --- a/meta-xilinx-bsp/recipes-kernel/linux/xilinx-kmeta/features/overlay/overlay.scc +++ /dev/null @@ -1,4 +0,0 @@ -define KFEATURE_DESCRIPTION "Enable overlay" -define KFEATURE_COMPATIBILITY board - -kconfig hardware overlay.cfg diff --git a/meta-xilinx-bsp/recipes-kernel/linux/xilinx-kmeta/features/uio/uio.cfg b/meta-xilinx-bsp/recipes-kernel/linux/xilinx-kmeta/features/uio/uio.cfg deleted file mode 100644 index 048ffe49..00000000 --- a/meta-xilinx-bsp/recipes-kernel/linux/xilinx-kmeta/features/uio/uio.cfg +++ /dev/null @@ -1,4 +0,0 @@ -CONFIG_UIO=y -CONFIG_UIO_PDRV_GENIRQ=y -CONFIG_UIO_DMEM_GENIRQ=y - diff --git a/meta-xilinx-bsp/recipes-kernel/linux/xilinx-kmeta/features/uio/uio.scc b/meta-xilinx-bsp/recipes-kernel/linux/xilinx-kmeta/features/uio/uio.scc deleted file mode 100644 index 9697949a..00000000 --- a/meta-xilinx-bsp/recipes-kernel/linux/xilinx-kmeta/features/uio/uio.scc +++ /dev/null @@ -1,5 +0,0 @@ -define KFEATURE_DESCRIPTION "Enable UIO Support" -define KFEATURE_COMPATIBILITY board - -kconfig hardware uio.cfg - diff --git a/meta-xilinx-bsp/recipes-kernel/linux/xilinx-kmeta/features/v4l2/v4l2-xilinx.cfg b/meta-xilinx-bsp/recipes-kernel/linux/xilinx-kmeta/features/v4l2/v4l2-xilinx.cfg deleted file mode 100644 index 49a5d6fe..00000000 --- a/meta-xilinx-bsp/recipes-kernel/linux/xilinx-kmeta/features/v4l2/v4l2-xilinx.cfg +++ /dev/null @@ -1,23 +0,0 @@ -# Media support -CONFIG_MEDIA_SUPPORT=y -CONFIG_MEDIA_CAMERA_SUPPORT=y -CONFIG_MEDIA_CONTROLLER=y - -# V4L -CONFIG_V4L_PLATFORM_DRIVERS=y -CONFIG_VIDEO_DEV=y -CONFIG_VIDEO_V4L2=y -CONFIG_VIDEO_V4L2_SUBDEV_API=y - -# Xilinx Video drivers -CONFIG_VIDEO_XILINX=y -CONFIG_VIDEO_XILINX_CFA=y -CONFIG_VIDEO_XILINX_CRESAMPLE=y -CONFIG_VIDEO_XILINX_HLS=y -CONFIG_VIDEO_XILINX_REMAPPER=y -CONFIG_VIDEO_XILINX_RGB2YUV=y -CONFIG_VIDEO_XILINX_SCALER=y -CONFIG_VIDEO_XILINX_SWITCH=y -CONFIG_VIDEO_XILINX_TPG=y -CONFIG_VIDEO_XILINX_VTC=y - diff --git a/meta-xilinx-bsp/recipes-kernel/linux/xilinx-kmeta/features/v4l2/v4l2-xilinx.scc b/meta-xilinx-bsp/recipes-kernel/linux/xilinx-kmeta/features/v4l2/v4l2-xilinx.scc deleted file mode 100644 index 6d6ba6ac..00000000 --- a/meta-xilinx-bsp/recipes-kernel/linux/xilinx-kmeta/features/v4l2/v4l2-xilinx.scc +++ /dev/null @@ -1,4 +0,0 @@ -define KFEATURE_DESCRIPTION "Enable Xilinx V4L2 support" -define KFEATURE_COMPATIBILITY board - -kconfig hardware v4l2-xilinx.cfg
\ No newline at end of file diff --git a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils%.bbappend b/meta-xilinx-bsp/recipes-microblaze/binutils/binutils%.bbappend deleted file mode 100644 index 1a00c61c..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils%.bbappend +++ /dev/null @@ -1,32 +0,0 @@ -FILESEXTRAPATHS_append_microblaze := "${THISDIR}/binutils-2.32:" -SRC_URI_append_microblaze = " \ - file://0001-Add-wdc.ext.clear-and-wdc.ext.flush-insns.patch \ - file://0002-Add-mlittle-endian-and-mbig-endian-flags.patch \ - file://0003-Disable-the-warning-message-for-eh_frame_hdr.patch \ - file://0004-Fix-relaxation-of-assembler-resolved-references.patch \ - file://0005-LOCAL-Fixup-debug_loc-sections-after-linker-relaxati.patch \ - file://0006-upstream-change-to-garbage-collection-sweep-causes-m.patch \ - file://0007-Fix-bug-in-TLSTPREL-Relocation.patch \ - file://0008-Added-Address-extension-instructions.patch \ - file://0009-fixing-the-MAX_OPCODES-to-correct-value.patch \ - file://0010-Add-new-bit-field-instructions.patch \ - file://0011-fixing-the-imm-bug.patch \ - file://0012-Patch-Microblaze-fixed-bug-in-GCC-so-that-It-will-su.patch \ - file://0013-fixing-the-constant-range-check-issue.patch \ - file://0014-Patch-Microblaze-Compiler-will-give-error-messages-i.patch \ - file://0015-intial-commit-of-MB-64-bit.patch \ - file://0016-MB-X-initial-commit.patch \ - file://0017-Patch-Microblaze-negl-instruction-is-overriding-rsub.patch \ - file://0018-Added-relocations-for-MB-X.patch \ - file://0019-Fixed-MB-x-relocation-issues.patch \ - file://0020-Fixing-the-branch-related-issues.patch \ - file://0021-Fixed-address-computation-issues-with-64bit-address.patch \ - file://0022-Adding-new-relocation-to-support-64bit-rodata.patch \ - file://0023-fixing-the-.bss-relocation-issue.patch \ - file://0024-Fixed-the-bug-in-the-R_MICROBLAZE_64_NONE-relocation.patch \ - file://0025-Patch-MicroBlaze-fixed-Build-issue-which-are-due-to-.patch \ - file://0026-Patch-Microblaze-changes-of-PR22458-failure-to-choos.patch \ - file://0029-Patch-Microblaze-Binutils-security-check-is-causing-.patch \ - file://0030-fixing-the-long-long-long-mingw-toolchain-issue.patch \ - file://0031-fixing-the-_STACK_SIZE-issue-with-the-flto-flag.patch \ - " diff --git a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0001-Add-wdc.ext.clear-and-wdc.ext.flush-insns.patch b/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0001-Add-wdc.ext.clear-and-wdc.ext.flush-insns.patch deleted file mode 100644 index 58608485..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0001-Add-wdc.ext.clear-and-wdc.ext.flush-insns.patch +++ /dev/null @@ -1,63 +0,0 @@ -From ad671256112cfee47871e91c6d390daea1b8fa2f Mon Sep 17 00:00:00 2001 -From: David Holsgrove <david.holsgrove@xilinx.com> -Date: Wed, 8 May 2013 11:03:36 +1000 -Subject: [PATCH] Add wdc.ext.clear and wdc.ext.flush insns - -Added two new instructions, wdc.ext.clear and wdc.ext.flush, -to enable MicroBlaze to flush an external cache, which is -used with the new coherency support for multiprocessing. - -Signed-off-by: Nagaraju Mekala <nagaraju.mekala@xilinx.com> -Signed-off-by: David Holsgrove <david.holsgrove@xilinx.com> - ---- - opcodes/microblaze-opc.h | 5 ++++- - opcodes/microblaze-opcm.h | 4 ++-- - 2 files changed, 6 insertions(+), 3 deletions(-) - -diff --git a/opcodes/microblaze-opc.h b/opcodes/microblaze-opc.h -index 62ee3c9..865151f 100644 ---- a/opcodes/microblaze-opc.h -+++ b/opcodes/microblaze-opc.h -@@ -91,6 +91,7 @@ - #define OPCODE_MASK_H3 0xFC000600 /* High 6 bits and bits 21, 22. */ - #define OPCODE_MASK_H32 0xFC00FC00 /* High 6 bits and bit 16-21. */ - #define OPCODE_MASK_H34B 0xFC0000FF /* High 6 bits and low 8 bits. */ -+#define OPCODE_MASK_H35B 0xFC0004FF /* High 6 bits and low 9 bits. */ - #define OPCODE_MASK_H34C 0xFC0007E0 /* High 6 bits and bits 21-26. */ - - /* New Mask for msrset, msrclr insns. */ -@@ -101,7 +102,7 @@ - #define DELAY_SLOT 1 - #define NO_DELAY_SLOT 0 - --#define MAX_OPCODES 289 -+#define MAX_OPCODES 291 - - struct op_code_struct - { -@@ -174,7 +175,9 @@ struct op_code_struct - {"wic", INST_TYPE_R1_R2_SPECIAL, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x90000068, OPCODE_MASK_H34B, wic, special_inst }, - {"wdc", INST_TYPE_R1_R2_SPECIAL, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x90000064, OPCODE_MASK_H34B, wdc, special_inst }, - {"wdc.clear", INST_TYPE_R1_R2_SPECIAL, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x90000066, OPCODE_MASK_H34B, wdcclear, special_inst }, -+ {"wdc.ext.clear", INST_TYPE_R1_R2_SPECIAL, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x90000466, OPCODE_MASK_H35B, wdcextclear, special_inst }, - {"wdc.flush", INST_TYPE_R1_R2_SPECIAL, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x90000074, OPCODE_MASK_H34B, wdcflush, special_inst }, -+ {"wdc.ext.flush", INST_TYPE_R1_R2_SPECIAL, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x90000476, OPCODE_MASK_H35B, wdcextflush, special_inst }, - {"mts", INST_TYPE_SPECIAL_R1, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_MTS, 0x9400C000, OPCODE_MASK_H13S, mts, special_inst }, - {"mfs", INST_TYPE_RD_SPECIAL, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_MFS, 0x94008000, OPCODE_MASK_H23S, mfs, special_inst }, - {"br", INST_TYPE_R2, INST_PC_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x98000000, OPCODE_MASK_H124, br, branch_inst }, -diff --git a/opcodes/microblaze-opcm.h b/opcodes/microblaze-opcm.h -index 5a2d3b0..42f3dd3 100644 ---- a/opcodes/microblaze-opcm.h -+++ b/opcodes/microblaze-opcm.h -@@ -33,8 +33,8 @@ enum microblaze_instr - /* 'or/and/xor' are C++ keywords. */ - microblaze_or, microblaze_and, microblaze_xor, - andn, pcmpbf, pcmpbc, pcmpeq, pcmpne, sra, src, srl, sext8, sext16, -- wic, wdc, wdcclear, wdcflush, mts, mfs, mbar, br, brd, -- brld, bra, brad, brald, microblaze_brk, beq, beqd, bne, bned, blt, -+ wic, wdc, wdcclear, wdcextclear, wdcflush, wdcextflush, mts, mfs, mbar, br, -+ brd, brld, bra, brad, brald, microblaze_brk, beq, beqd, bne, bned, blt, - bltd, ble, bled, bgt, bgtd, bge, bged, ori, andi, xori, andni, - imm, rtsd, rtid, rtbd, rted, bri, brid, brlid, brai, braid, bralid, - brki, beqi, beqid, bnei, bneid, blti, bltid, blei, bleid, bgti, diff --git a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0002-Add-mlittle-endian-and-mbig-endian-flags.patch b/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0002-Add-mlittle-endian-and-mbig-endian-flags.patch deleted file mode 100644 index f0df4b8f..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0002-Add-mlittle-endian-and-mbig-endian-flags.patch +++ /dev/null @@ -1,62 +0,0 @@ -From cd4e233a38df5eee833c77f4393e710ad5383ac0 Mon Sep 17 00:00:00 2001 -From: nagaraju <nmekala@xilix.com> -Date: Tue, 19 Mar 2013 17:18:23 +0530 -Subject: [PATCH] Add mlittle-endian and mbig-endian flags - -Added support in gas for mlittle-endian and mbig-endian flags -as options. - -Updated show usage for MicroBlaze specific assembler options -to include new entries. - -Signed-off-by: Nagaraju Mekala <nagaraju.mekala@xilinx.com> -Signed-off-by: David Holsgrove <david.holsgrove@xilinx.com> - ---- - gas/config/tc-microblaze.c | 9 +++++++++ - 1 file changed, 9 insertions(+) - -diff --git a/gas/config/tc-microblaze.c b/gas/config/tc-microblaze.c -index ab90c6b..c92e9ce 100644 ---- a/gas/config/tc-microblaze.c -+++ b/gas/config/tc-microblaze.c -@@ -37,6 +37,8 @@ - - #define OPTION_EB (OPTION_MD_BASE + 0) - #define OPTION_EL (OPTION_MD_BASE + 1) -+#define OPTION_LITTLE (OPTION_MD_BASE + 2) -+#define OPTION_BIG (OPTION_MD_BASE + 3) - - void microblaze_generate_symbol (char *sym); - static bfd_boolean check_spl_reg (unsigned *); -@@ -1845,6 +1847,8 @@ struct option md_longopts[] = - { - {"EB", no_argument, NULL, OPTION_EB}, - {"EL", no_argument, NULL, OPTION_EL}, -+ {"mlittle-endian", no_argument, NULL, OPTION_LITTLE}, -+ {"mbig-endian", no_argument, NULL, OPTION_BIG}, - { NULL, no_argument, NULL, 0} - }; - -@@ -2498,9 +2502,11 @@ md_parse_option (int c, const char * arg ATTRIBUTE_UNUSED) - switch (c) - { - case OPTION_EB: -+ case OPTION_BIG: - target_big_endian = 1; - break; - case OPTION_EL: -+ case OPTION_LITTLE: - target_big_endian = 0; - break; - default: -@@ -2515,6 +2521,9 @@ md_show_usage (FILE * stream ATTRIBUTE_UNUSED) - /* fprintf(stream, _("\ - MicroBlaze options:\n\ - -noSmall Data in the comm and data sections do not go into the small data section\n")); */ -+ fprintf (stream, _(" MicroBlaze specific assembler options:\n")); -+ fprintf (stream, " -%-23s%s\n", "mbig-endian", N_("assemble for a big endian cpu")); -+ fprintf (stream, " -%-23s%s\n", "mlittle-endian", N_("assemble for a little endian cpu")); - } - - diff --git a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0003-Disable-the-warning-message-for-eh_frame_hdr.patch b/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0003-Disable-the-warning-message-for-eh_frame_hdr.patch deleted file mode 100644 index 64d27d92..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0003-Disable-the-warning-message-for-eh_frame_hdr.patch +++ /dev/null @@ -1,30 +0,0 @@ -From a8cbf5f3e93150132f194cfa3008fe896457171f Mon Sep 17 00:00:00 2001 -From: "Edgar E. Iglesias" <edgar.iglesias@gmail.com> -Date: Fri, 22 Jun 2012 01:20:20 +0200 -Subject: [PATCH] Disable the warning message for eh_frame_hdr - -Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> -Signed-off-by: Nagaraju Mekala <nagaraju.mekala@xilinx.com> - ---- - bfd/elf-eh-frame.c | 3 +++ - 1 file changed, 3 insertions(+) - -diff --git a/bfd/elf-eh-frame.c b/bfd/elf-eh-frame.c -index a13e81e..1824ba6 100644 ---- a/bfd/elf-eh-frame.c -+++ b/bfd/elf-eh-frame.c -@@ -1044,10 +1044,13 @@ _bfd_elf_parse_eh_frame (bfd *abfd, struct bfd_link_info *info, - goto success; - - free_no_table: -+/* FIXME: Remove the microblaze specifics when relaxing gets fixed. */ -+if (bfd_get_arch(abfd) != bfd_arch_microblaze) { - _bfd_error_handler - /* xgettext:c-format */ - (_("error in %pB(%pA); no .eh_frame_hdr table will be created"), - abfd, sec); -+} - hdr_info->u.dwarf.table = FALSE; - if (sec_info) - free (sec_info); diff --git a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0004-Fix-relaxation-of-assembler-resolved-references.patch b/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0004-Fix-relaxation-of-assembler-resolved-references.patch deleted file mode 100644 index 4cae439e..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0004-Fix-relaxation-of-assembler-resolved-references.patch +++ /dev/null @@ -1,74 +0,0 @@ -From 2b87c5c4ec4a7d6285c0991c202aae3cf8401d99 Mon Sep 17 00:00:00 2001 -From: "Edgar E. Iglesias" <edgar.iglesias@gmail.com> -Date: Tue, 14 Feb 2012 01:00:22 +0100 -Subject: [PATCH] Fix relaxation of assembler resolved references - -Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> -Signed-off-by: Nagaraju Mekala <nagaraju.mekala@xilinx.com> - ---- - bfd/elf32-microblaze.c | 38 ++++++++++++++++++++++++++++++++++++++ - gas/config/tc-microblaze.c | 1 + - 2 files changed, 39 insertions(+) - -diff --git a/bfd/elf32-microblaze.c b/bfd/elf32-microblaze.c -index e3c8027..359484d 100644 ---- a/bfd/elf32-microblaze.c -+++ b/bfd/elf32-microblaze.c -@@ -1973,6 +1973,44 @@ microblaze_elf_relax_section (bfd *abfd, - irelscanend = irelocs + o->reloc_count; - for (irelscan = irelocs; irelscan < irelscanend; irelscan++) - { -+ if (ELF32_R_TYPE (irelscan->r_info) == (int) R_MICROBLAZE_NONE) -+ { -+ unsigned int val; -+ -+ isym = isymbuf + ELF32_R_SYM (irelscan->r_info); -+ -+ /* This was a PC-relative instruction that was completely resolved. */ -+ if (ocontents == NULL) -+ { -+ if (elf_section_data (o)->this_hdr.contents != NULL) -+ ocontents = elf_section_data (o)->this_hdr.contents; -+ else -+ { -+ /* We always cache the section contents. -+ Perhaps, if info->keep_memory is FALSE, we -+ should free them, if we are permitted to. */ -+ -+ if (o->rawsize == 0) -+ o->rawsize = o->size; -+ ocontents = (bfd_byte *) bfd_malloc (o->rawsize); -+ if (ocontents == NULL) -+ goto error_return; -+ if (!bfd_get_section_contents (abfd, o, ocontents, -+ (file_ptr) 0, -+ o->rawsize)) -+ goto error_return; -+ elf_section_data (o)->this_hdr.contents = ocontents; -+ } -+ } -+ irelscan->r_addend -= calc_fixup (irelscan->r_addend -+ + isym->st_value, sec); -+ val = bfd_get_32 (abfd, ocontents + irelscan->r_offset); -+ microblaze_bfd_write_imm_value_32 (abfd, ocontents + irelscan->r_offset, -+ irelscan->r_addend); -+ } -+ if (ELF32_R_TYPE (irelscan->r_info) == (int) R_MICROBLAZE_64_NONE) { -+ fprintf(stderr, "Unhandled NONE 64\n"); -+ } - if (ELF32_R_TYPE (irelscan->r_info) == (int) R_MICROBLAZE_32) - { - isym = isymbuf + ELF32_R_SYM (irelscan->r_info); -diff --git a/gas/config/tc-microblaze.c b/gas/config/tc-microblaze.c -index c92e9ce..3e72840 100644 ---- a/gas/config/tc-microblaze.c -+++ b/gas/config/tc-microblaze.c -@@ -2205,6 +2205,7 @@ md_apply_fix (fixS * fixP, - else - fixP->fx_r_type = BFD_RELOC_NONE; - fixP->fx_addsy = section_symbol (absolute_section); -+ fixP->fx_done = 0; - } - return; - } diff --git a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0005-LOCAL-Fixup-debug_loc-sections-after-linker-relaxati.patch b/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0005-LOCAL-Fixup-debug_loc-sections-after-linker-relaxati.patch deleted file mode 100644 index a2954c91..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0005-LOCAL-Fixup-debug_loc-sections-after-linker-relaxati.patch +++ /dev/null @@ -1,245 +0,0 @@ -From 68a91eb7ac94f0e0c6e9ebd7ad148c80cbc227df Mon Sep 17 00:00:00 2001 -From: Nagaraju Mekala <nmekala@xilix.com> -Date: Mon, 6 Feb 2017 15:53:08 +0530 -Subject: [PATCH] Fixup debug_loc sections after linker relaxation Adds a new - reloctype R_MICROBLAZE_32_NONE, used for passing reloc info from the - assembler to the linker when the linker manages to fully resolve a local - symbol reference. - -This is a workaround for design flaws in the assembler to -linker interface with regards to linker relaxation. - -Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> -Signed-off-by: Nagaraju Mekala <nagaraju.mekala@xilinx.com> - ---- - bfd/bfd-in2.h | 9 ++++++-- - bfd/elf32-microblaze.c | 53 ++++++++++++++++++++++++++++++++++------------ - bfd/libbfd.h | 1 + - bfd/reloc.c | 6 ++++++ - binutils/readelf.c | 4 ++++ - gas/config/tc-microblaze.c | 5 ++++- - include/elf/microblaze.h | 2 ++ - 7 files changed, 64 insertions(+), 16 deletions(-) - -diff --git a/bfd/bfd-in2.h b/bfd/bfd-in2.h -index e251d7e..fe6933a 100644 ---- a/bfd/bfd-in2.h -+++ b/bfd/bfd-in2.h -@@ -5867,10 +5867,15 @@ value relative to the read-write small data area anchor */ - expressions of the form "Symbol Op Symbol" */ - BFD_RELOC_MICROBLAZE_32_SYM_OP_SYM, - --/* This is a 64 bit reloc that stores the 32 bit pc relative -+/* This is a 32 bit reloc that stores the 32 bit pc relative - value in two words (with an imm instruction). No relocation is - done here - only used for relaxing */ -- BFD_RELOC_MICROBLAZE_64_NONE, -+ BFD_RELOC_MICROBLAZE_32_NONE, -+ -+/* This is a 64 bit reloc that stores the 32 bit pc relative -+ * +value in two words (with an imm instruction). No relocation is -+ * +done here - only used for relaxing */ -+ BFD_RELOC_MICROBLAZE_64_NONE, - - /* This is a 64 bit reloc that stores the 32 bit pc relative - value in two words (with an imm instruction). The relocation is -diff --git a/bfd/elf32-microblaze.c b/bfd/elf32-microblaze.c -index 359484d..1c69c26 100644 ---- a/bfd/elf32-microblaze.c -+++ b/bfd/elf32-microblaze.c -@@ -176,7 +176,21 @@ static reloc_howto_type microblaze_elf_howto_raw[] = - 0x0000ffff, /* Dest Mask. */ - FALSE), /* PC relative offset? */ - -- /* This reloc does nothing. Used for relaxation. */ -+ HOWTO (R_MICROBLAZE_32_NONE, /* Type. */ -+ 0, /* Rightshift. */ -+ 2, /* Size (0 = byte, 1 = short, 2 = long). */ -+ 32, /* Bitsize. */ -+ TRUE, /* PC_relative. */ -+ 0, /* Bitpos. */ -+ complain_overflow_bitfield, /* Complain on overflow. */ -+ NULL, /* Special Function. */ -+ "R_MICROBLAZE_32_NONE",/* Name. */ -+ FALSE, /* Partial Inplace. */ -+ 0, /* Source Mask. */ -+ 0, /* Dest Mask. */ -+ FALSE), /* PC relative offset? */ -+ -+ /* This reloc does nothing. Used for relaxation. */ - HOWTO (R_MICROBLAZE_64_NONE, /* Type. */ - 0, /* Rightshift. */ - 3, /* Size (0 = byte, 1 = short, 2 = long). */ -@@ -562,6 +576,9 @@ microblaze_elf_reloc_type_lookup (bfd * abfd ATTRIBUTE_UNUSED, - case BFD_RELOC_NONE: - microblaze_reloc = R_MICROBLAZE_NONE; - break; -+ case BFD_RELOC_MICROBLAZE_32_NONE: -+ microblaze_reloc = R_MICROBLAZE_32_NONE; -+ break; - case BFD_RELOC_MICROBLAZE_64_NONE: - microblaze_reloc = R_MICROBLAZE_64_NONE; - break; -@@ -1918,6 +1935,7 @@ microblaze_elf_relax_section (bfd *abfd, - } - break; - case R_MICROBLAZE_NONE: -+ case R_MICROBLAZE_32_NONE: - { - /* This was a PC-relative instruction that was - completely resolved. */ -@@ -1926,12 +1944,18 @@ microblaze_elf_relax_section (bfd *abfd, - target_address = irel->r_addend + irel->r_offset; - sfix = calc_fixup (irel->r_offset, 0, sec); - efix = calc_fixup (target_address, 0, sec); -+ -+ /* Validate the in-band val. */ -+ val = bfd_get_32 (abfd, contents + irel->r_offset); -+ if (val != irel->r_addend && ELF32_R_TYPE (irel->r_info) == R_MICROBLAZE_32_NONE) { -+ fprintf(stderr, "%d: CORRUPT relax reloc %x %lx\n", __LINE__, val, irel->r_addend); -+ } - irel->r_addend -= (efix - sfix); - /* Should use HOWTO. */ - microblaze_bfd_write_imm_value_32 (abfd, contents + irel->r_offset, - irel->r_addend); -- } -- break; -+ } -+ break; - case R_MICROBLAZE_64_NONE: - { - /* This was a PC-relative 64-bit instruction that was -@@ -1973,12 +1997,16 @@ microblaze_elf_relax_section (bfd *abfd, - irelscanend = irelocs + o->reloc_count; - for (irelscan = irelocs; irelscan < irelscanend; irelscan++) - { -- if (ELF32_R_TYPE (irelscan->r_info) == (int) R_MICROBLAZE_NONE) -+ if (1 && ELF32_R_TYPE (irelscan->r_info) == (int) R_MICROBLAZE_32_NONE) - { - unsigned int val; - - isym = isymbuf + ELF32_R_SYM (irelscan->r_info); - -+ /* hax: We only do the following fixup for debug location lists. */ -+ if (strcmp(".debug_loc", o->name)) -+ continue; -+ - /* This was a PC-relative instruction that was completely resolved. */ - if (ocontents == NULL) - { -@@ -1999,18 +2027,17 @@ microblaze_elf_relax_section (bfd *abfd, - (file_ptr) 0, - o->rawsize)) - goto error_return; -- elf_section_data (o)->this_hdr.contents = ocontents; -- } -- } -- irelscan->r_addend -= calc_fixup (irelscan->r_addend -- + isym->st_value, sec); -+ elf_section_data (o)->this_hdr.contents = ocontents; -+ } -+ } - val = bfd_get_32 (abfd, ocontents + irelscan->r_offset); -+ if (val != irelscan->r_addend) { -+ fprintf(stderr, "%d: CORRUPT relax reloc! %x %lx\n", __LINE__, val, irelscan->r_addend); -+ } -+ irelscan->r_addend -= calc_fixup (irelscan->r_addend, 0, sec); - microblaze_bfd_write_imm_value_32 (abfd, ocontents + irelscan->r_offset, - irelscan->r_addend); - } -- if (ELF32_R_TYPE (irelscan->r_info) == (int) R_MICROBLAZE_64_NONE) { -- fprintf(stderr, "Unhandled NONE 64\n"); -- } - if (ELF32_R_TYPE (irelscan->r_info) == (int) R_MICROBLAZE_32) - { - isym = isymbuf + ELF32_R_SYM (irelscan->r_info); -@@ -2070,7 +2097,7 @@ microblaze_elf_relax_section (bfd *abfd, - elf_section_data (o)->this_hdr.contents = ocontents; - } - } -- irelscan->r_addend -= calc_fixup (irel->r_addend -+ irelscan->r_addend -= calc_fixup (irelscan->r_addend - + isym->st_value, - 0, - sec); -diff --git a/bfd/libbfd.h b/bfd/libbfd.h -index 36284d7..feb9fad 100644 ---- a/bfd/libbfd.h -+++ b/bfd/libbfd.h -@@ -2901,6 +2901,7 @@ static const char *const bfd_reloc_code_real_names[] = { "@@uninitialized@@", - "BFD_RELOC_MICROBLAZE_32_ROSDA", - "BFD_RELOC_MICROBLAZE_32_RWSDA", - "BFD_RELOC_MICROBLAZE_32_SYM_OP_SYM", -+ "BFD_RELOC_MICROBLAZE_32_NONE", - "BFD_RELOC_MICROBLAZE_64_NONE", - "BFD_RELOC_MICROBLAZE_64_GOTPC", - "BFD_RELOC_MICROBLAZE_64_GOT", -diff --git a/bfd/reloc.c b/bfd/reloc.c -index e6446a7..87753ae 100644 ---- a/bfd/reloc.c -+++ b/bfd/reloc.c -@@ -6796,6 +6796,12 @@ ENUMDOC - This is a 32 bit reloc for the microblaze to handle - expressions of the form "Symbol Op Symbol" - ENUM -+ BFD_RELOC_MICROBLAZE_32_NONE -+ENUMDOC -+ This is a 32 bit reloc that stores the 32 bit pc relative -+ value in two words (with an imm instruction). No relocation is -+ done here - only used for relaxing -+ENUM - BFD_RELOC_MICROBLAZE_64_NONE - ENUMDOC - This is a 64 bit reloc that stores the 32 bit pc relative -diff --git a/binutils/readelf.c b/binutils/readelf.c -index 9df3742..1bbc2d1 100644 ---- a/binutils/readelf.c -+++ b/binutils/readelf.c -@@ -13020,6 +13020,10 @@ is_none_reloc (Filedata * filedata, unsigned int reloc_type) - || reloc_type == 32 /* R_AVR_DIFF32. */); - case EM_METAG: - return reloc_type == 3; /* R_METAG_NONE. */ -+ case EM_MICROBLAZE: -+ return reloc_type == 30 /* R_MICROBLAZE_32_NONE. */ -+ || reloc_type == 0 /* R_MICROBLAZE_NONE. */ -+ || reloc_type == 9; /* R_MICROBLAZE_64_NONE. */ - case EM_NDS32: - return (reloc_type == 0 /* R_XTENSA_NONE. */ - || reloc_type == 204 /* R_NDS32_DIFF8. */ -diff --git a/gas/config/tc-microblaze.c b/gas/config/tc-microblaze.c -index 3e72840..fa665b4 100644 ---- a/gas/config/tc-microblaze.c -+++ b/gas/config/tc-microblaze.c -@@ -2201,7 +2201,9 @@ md_apply_fix (fixS * fixP, - /* This fixup has been resolved. Create a reloc in case the linker - moves code around due to relaxing. */ - if (fixP->fx_r_type == BFD_RELOC_64_PCREL) -- fixP->fx_r_type = BFD_RELOC_MICROBLAZE_64_NONE; -+ fixP->fx_r_type = BFD_RELOC_MICROBLAZE_64_NONE; -+ else if (fixP->fx_r_type == BFD_RELOC_32) -+ fixP->fx_r_type = BFD_RELOC_MICROBLAZE_32_NONE; - else - fixP->fx_r_type = BFD_RELOC_NONE; - fixP->fx_addsy = section_symbol (absolute_section); -@@ -2426,6 +2428,7 @@ tc_gen_reloc (asection * section ATTRIBUTE_UNUSED, fixS * fixp) - switch (fixp->fx_r_type) - { - case BFD_RELOC_NONE: -+ case BFD_RELOC_MICROBLAZE_32_NONE: - case BFD_RELOC_MICROBLAZE_64_NONE: - case BFD_RELOC_32: - case BFD_RELOC_MICROBLAZE_32_LO: -diff --git a/include/elf/microblaze.h b/include/elf/microblaze.h -index 830b5ad..6ee0966 100644 ---- a/include/elf/microblaze.h -+++ b/include/elf/microblaze.h -@@ -61,6 +61,8 @@ START_RELOC_NUMBERS (elf_microblaze_reloc_type) - RELOC_NUMBER (R_MICROBLAZE_TEXTPCREL_64, 30) /* PC-relative TEXT offset. */ - RELOC_NUMBER (R_MICROBLAZE_TEXTREL_64, 31) /* TEXT Entry offset 64-bit. */ - RELOC_NUMBER (R_MICROBLAZE_TEXTREL_32_LO, 32) /* TEXT Entry offset 32-bit. */ -+ RELOC_NUMBER (R_MICROBLAZE_32_NONE, 33) -+ - END_RELOC_NUMBERS (R_MICROBLAZE_max) - - /* Global base address names. */ diff --git a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0006-upstream-change-to-garbage-collection-sweep-causes-m.patch b/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0006-upstream-change-to-garbage-collection-sweep-causes-m.patch deleted file mode 100644 index 8c72ecf7..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0006-upstream-change-to-garbage-collection-sweep-causes-m.patch +++ /dev/null @@ -1,38 +0,0 @@ -From 0ee164f7e50d88e1cda4fdebd6f7bd182d0f27b3 Mon Sep 17 00:00:00 2001 -From: David Holsgrove <david.holsgrove@xilinx.com> -Date: Wed, 27 Feb 2013 13:56:11 +1000 -Subject: [PATCH] upstream change to garbage collection sweep causes mb - regression - -Upstream change for PR13177 now clears the def_regular during gc_sweep of a -section. (All other archs in binutils/bfd/elf32-*.c received an update -to a warning about unresolvable relocations - this warning is not present -in binutils/bfd/elf32-microblaze.c, but this warning check would not -prevent the error being seen) - -The visible issue with this change is when running a c++ application -in Petalinux which links libstdc++.so for exception handling it segfaults -on execution. - -This does not occur if static linking libstdc++.a, so its during the -relocations for a shared lib with garbage collection this occurs - -Signed-off-by: David Holsgrove <david.holsgrove@xilinx.com> -Signed-off-by: Nagaraju Mekala <nagaraju.mekala@xilinx.com> - ---- - bfd/elflink.c | 1 - - 1 file changed, 1 deletion(-) - -diff --git a/bfd/elflink.c b/bfd/elflink.c -index e50c0e4..09d43e3 100644 ---- a/bfd/elflink.c -+++ b/bfd/elflink.c -@@ -6187,7 +6187,6 @@ elf_gc_sweep_symbol (struct elf_link_hash_entry *h, void *data) - - inf = (struct elf_gc_sweep_symbol_info *) data; - (*inf->hide_symbol) (inf->info, h, TRUE); -- h->def_regular = 0; - h->ref_regular = 0; - h->ref_regular_nonweak = 0; - } diff --git a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0007-Fix-bug-in-TLSTPREL-Relocation.patch b/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0007-Fix-bug-in-TLSTPREL-Relocation.patch deleted file mode 100644 index 472aa0cf..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0007-Fix-bug-in-TLSTPREL-Relocation.patch +++ /dev/null @@ -1,33 +0,0 @@ -From 1367d2933de24720fa24032947f784b72b54e974 Mon Sep 17 00:00:00 2001 -From: Nagaraju Mekala <nmekala@xilix.com> -Date: Mon, 15 Jun 2015 16:50:30 +0530 -Subject: [PATCH] Fix bug in TLSTPREL Relocation - -Fixed the problem related to the fixup/relocations TLSTPREL. -When the fixup is applied the addend is not added at the correct offset -of the instruction. The offset is hard coded considering its big endian -and it fails for Little endian. This patch allows support for both -big & little-endian compilers - -Signed-off-by: Nagaraju Mekala <nagaraju.mekala@xilinx.com> - ---- - bfd/elf32-microblaze.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -diff --git a/bfd/elf32-microblaze.c b/bfd/elf32-microblaze.c -index 1c69c26..d19a6dc 100644 ---- a/bfd/elf32-microblaze.c -+++ b/bfd/elf32-microblaze.c -@@ -1451,9 +1451,9 @@ microblaze_elf_relocate_section (bfd *output_bfd, - relocation += addend; - relocation -= dtprel_base(info); - bfd_put_16 (input_bfd, (relocation >> 16) & 0xffff, -- contents + offset + 2); -+ contents + offset + endian); - bfd_put_16 (input_bfd, relocation & 0xffff, -- contents + offset + 2 + INST_WORD_SIZE); -+ contents + offset + endian + INST_WORD_SIZE); - break; - case (int) R_MICROBLAZE_TEXTREL_64: - case (int) R_MICROBLAZE_TEXTREL_32_LO: diff --git a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0008-Added-Address-extension-instructions.patch b/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0008-Added-Address-extension-instructions.patch deleted file mode 100644 index 23d17935..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0008-Added-Address-extension-instructions.patch +++ /dev/null @@ -1,96 +0,0 @@ -From 57675e049d815f6fce100bd5effaea187abacf04 Mon Sep 17 00:00:00 2001 -From: Nagaraju Mekala <nmekala@xilix.com> -Date: Mon, 18 Jan 2016 12:28:21 +0530 -Subject: [PATCH] Added Address extension instructions - -This patch adds the support of new instructions which are required -for supporting Address extension feature. - -Signed-off-by :Nagaraju Mekala <nmekala@xilix.com> - -ChangeLog: - 2016-01-18 Nagaraju Mekala <nmekala@xilix.com> - - *microblaze-opc.h (op_code_struct): Update - Added new instructions - *microblaze-opcm.h (microblaze_instr): Update - Added new instructions - ---- - opcodes/microblaze-opc.h | 11 +++++++++++ - opcodes/microblaze-opcm.h | 10 +++++----- - 2 files changed, 16 insertions(+), 5 deletions(-) - -diff --git a/opcodes/microblaze-opc.h b/opcodes/microblaze-opc.h -index 865151f..330f104 100644 ---- a/opcodes/microblaze-opc.h -+++ b/opcodes/microblaze-opc.h -@@ -178,8 +178,11 @@ struct op_code_struct - {"wdc.ext.clear", INST_TYPE_R1_R2_SPECIAL, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x90000466, OPCODE_MASK_H35B, wdcextclear, special_inst }, - {"wdc.flush", INST_TYPE_R1_R2_SPECIAL, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x90000074, OPCODE_MASK_H34B, wdcflush, special_inst }, - {"wdc.ext.flush", INST_TYPE_R1_R2_SPECIAL, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x90000476, OPCODE_MASK_H35B, wdcextflush, special_inst }, -+ {"wdc.clear.ea", INST_TYPE_R1_R2_SPECIAL, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x900000E6, OPCODE_MASK_H34B, wdcclearea, special_inst }, - {"mts", INST_TYPE_SPECIAL_R1, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_MTS, 0x9400C000, OPCODE_MASK_H13S, mts, special_inst }, -+ {"mtse", INST_TYPE_SPECIAL_R1, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_MTS, 0x9500C000, OPCODE_MASK_H13S, mtse,special_inst }, - {"mfs", INST_TYPE_RD_SPECIAL, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_MFS, 0x94008000, OPCODE_MASK_H23S, mfs, special_inst }, -+ {"mfse", INST_TYPE_RD_SPECIAL, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_MFS, 0x94088000, OPCODE_MASK_H23S, mfse, special_inst }, - {"br", INST_TYPE_R2, INST_PC_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x98000000, OPCODE_MASK_H124, br, branch_inst }, - {"brd", INST_TYPE_R2, INST_PC_OFFSET, DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x98100000, OPCODE_MASK_H124, brd, branch_inst }, - {"brld", INST_TYPE_RD_R2, INST_PC_OFFSET, DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x98140000, OPCODE_MASK_H24, brld, branch_inst }, -@@ -229,18 +232,24 @@ struct op_code_struct - {"bgeid", INST_TYPE_R1_IMM, INST_PC_OFFSET, DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xBEA00000, OPCODE_MASK_H1, bgeid, branch_inst }, - {"lbu", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xC0000000, OPCODE_MASK_H4, lbu, memory_load_inst }, - {"lbur", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xC0000200, OPCODE_MASK_H4, lbur, memory_load_inst }, -+ {"lbuea", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xC0000080, OPCODE_MASK_H4, lbuea, memory_load_inst }, - {"lhu", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xC4000000, OPCODE_MASK_H4, lhu, memory_load_inst }, - {"lhur", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xC4000200, OPCODE_MASK_H4, lhur, memory_load_inst }, -+ {"lhuea", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xC4000080, OPCODE_MASK_H4, lhuea, memory_load_inst }, - {"lw", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xC8000000, OPCODE_MASK_H4, lw, memory_load_inst }, - {"lwr", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xC8000200, OPCODE_MASK_H4, lwr, memory_load_inst }, - {"lwx", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xC8000400, OPCODE_MASK_H4, lwx, memory_load_inst }, -+ {"lwea", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xC8000080, OPCODE_MASK_H4, lwea, memory_load_inst }, - {"sb", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xD0000000, OPCODE_MASK_H4, sb, memory_store_inst }, - {"sbr", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xD0000200, OPCODE_MASK_H4, sbr, memory_store_inst }, -+ {"sbea", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xD0000080, OPCODE_MASK_H4, sbea, memory_store_inst }, - {"sh", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xD4000000, OPCODE_MASK_H4, sh, memory_store_inst }, - {"shr", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xD4000200, OPCODE_MASK_H4, shr, memory_store_inst }, -+ {"shea", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xD4000080, OPCODE_MASK_H4, shea, memory_store_inst }, - {"sw", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xD8000000, OPCODE_MASK_H4, sw, memory_store_inst }, - {"swr", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xD8000200, OPCODE_MASK_H4, swr, memory_store_inst }, - {"swx", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xD8000400, OPCODE_MASK_H4, swx, memory_store_inst }, -+ {"swea", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xD8000080, OPCODE_MASK_H4, swea, memory_store_inst }, - {"lbui", INST_TYPE_RD_R1_IMM, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xE0000000, OPCODE_MASK_H, lbui, memory_load_inst }, - {"lhui", INST_TYPE_RD_R1_IMM, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xE4000000, OPCODE_MASK_H, lhui, memory_load_inst }, - {"lwi", INST_TYPE_RD_R1_IMM, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xE8000000, OPCODE_MASK_H, lwi, memory_load_inst }, -@@ -405,6 +414,8 @@ struct op_code_struct - {"clz", INST_TYPE_RD_R1, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x900000E0, OPCODE_MASK_H34, clz, special_inst }, - {"mbar", INST_TYPE_IMM5, INST_PC_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xB8020004, OPCODE_MASK_HN, mbar, special_inst }, - {"sleep", INST_TYPE_NONE, INST_PC_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xBA020004, OPCODE_MASK_HN, invalid_inst, special_inst }, /* translates to mbar 16. */ -+ {"hibernate", INST_TYPE_NONE, INST_PC_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xB9020004, OPCODE_MASK_HN, invalid_inst, special_inst }, /* translates to mbar 8. */ -+ {"suspend", INST_TYPE_NONE, INST_PC_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xBB020004, OPCODE_MASK_HN, invalid_inst, special_inst }, /* translates to mbar 24. */ - {"swapb", INST_TYPE_RD_R1, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x900001E0, OPCODE_MASK_H4, swapb, arithmetic_inst }, - {"swaph", INST_TYPE_RD_R1, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x900001E2, OPCODE_MASK_H4, swaph, arithmetic_inst }, - {"", 0, 0, 0, 0, 0, 0, 0, 0}, -diff --git a/opcodes/microblaze-opcm.h b/opcodes/microblaze-opcm.h -index 42f3dd3..1c39dbf 100644 ---- a/opcodes/microblaze-opcm.h -+++ b/opcodes/microblaze-opcm.h -@@ -33,13 +33,13 @@ enum microblaze_instr - /* 'or/and/xor' are C++ keywords. */ - microblaze_or, microblaze_and, microblaze_xor, - andn, pcmpbf, pcmpbc, pcmpeq, pcmpne, sra, src, srl, sext8, sext16, -- wic, wdc, wdcclear, wdcextclear, wdcflush, wdcextflush, mts, mfs, mbar, br, -- brd, brld, bra, brad, brald, microblaze_brk, beq, beqd, bne, bned, blt, -- bltd, ble, bled, bgt, bgtd, bge, bged, ori, andi, xori, andni, -+ wic, wdc, wdcclear, wdcextclear, wdcflush, wdcextflush, wdcclearea, mts, mtse, -+ mfs, mfse, mbar, br, brd, brld, bra, brad, brald, microblaze_brk, beq, beqd, -+ bne, bned, blt, bltd, ble, bled, bgt, bgtd, bge, bged, ori, andi, xori, andni, - imm, rtsd, rtid, rtbd, rted, bri, brid, brlid, brai, braid, bralid, - brki, beqi, beqid, bnei, bneid, blti, bltid, blei, bleid, bgti, -- bgtid, bgei, bgeid, lbu, lbur, lhu, lhur, lw, lwr, lwx, sb, sbr, sh, -- shr, sw, swr, swx, lbui, lhui, lwi, -+ bgtid, bgei, bgeid, lbu, lbuea, lbur, lhu, lhuea, lhur, lw, lwea, lwr, lwx, -+ sb, sbea, sbr, sh, shea, shr, sw, swea, swr, swx, lbui, lhui, lwi, - sbi, shi, swi, msrset, msrclr, tuqula, fadd, frsub, fmul, fdiv, - fcmp_lt, fcmp_eq, fcmp_le, fcmp_gt, fcmp_ne, fcmp_ge, fcmp_un, flt, - fint, fsqrt, diff --git a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0009-fixing-the-MAX_OPCODES-to-correct-value.patch b/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0009-fixing-the-MAX_OPCODES-to-correct-value.patch deleted file mode 100644 index 0eaa6990..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0009-fixing-the-MAX_OPCODES-to-correct-value.patch +++ /dev/null @@ -1,24 +0,0 @@ -From 98b1a76e13ad32c979208a22e5b6b7cb260426b0 Mon Sep 17 00:00:00 2001 -From: Nagaraju Mekala <nmekala@xilix.com> -Date: Thu, 28 Jan 2016 14:07:34 +0530 -Subject: [PATCH] fixing the MAX_OPCODES to correct value - -Signed-off-by: Nagaraju Mekala <nagaraju.mekala@xilinx.com> - ---- - opcodes/microblaze-opc.h | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/opcodes/microblaze-opc.h b/opcodes/microblaze-opc.h -index 330f104..2a6b841 100644 ---- a/opcodes/microblaze-opc.h -+++ b/opcodes/microblaze-opc.h -@@ -102,7 +102,7 @@ - #define DELAY_SLOT 1 - #define NO_DELAY_SLOT 0 - --#define MAX_OPCODES 291 -+#define MAX_OPCODES 299 - - struct op_code_struct - { diff --git a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0010-Add-new-bit-field-instructions.patch b/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0010-Add-new-bit-field-instructions.patch deleted file mode 100644 index ea288aa1..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0010-Add-new-bit-field-instructions.patch +++ /dev/null @@ -1,228 +0,0 @@ -From 200359b776fbb19a1423ff4d0c46f5301af197c6 Mon Sep 17 00:00:00 2001 -From: Nagaraju Mekala <nmekala@xilix.com> -Date: Mon, 18 Jul 2016 12:24:28 +0530 -Subject: [PATCH] Add new bit-field instructions - -This patches adds new bsefi and bsifi instructions. -BSEFI- The instruction shall extract a bit field from a -register and place it right-adjusted in the destination register. -The other bits in the destination register shall be set to zero -BSIFI- The instruction shall insert a right-adjusted bit field -from a register at another position in the destination register. -The rest of the bits in the destination register shall be unchanged - -Signed-off-by :Nagaraju Mekala <nmekala@xilix.com> - ---- - gas/config/tc-microblaze.c | 71 +++++++++++++++++++++++++++++++++++++++++++++- - opcodes/microblaze-dis.c | 16 +++++++++++ - opcodes/microblaze-opc.h | 12 +++++++- - opcodes/microblaze-opcm.h | 6 +++- - 4 files changed, 102 insertions(+), 3 deletions(-) - -diff --git a/gas/config/tc-microblaze.c b/gas/config/tc-microblaze.c -index fa665b4..71bb888 100644 ---- a/gas/config/tc-microblaze.c -+++ b/gas/config/tc-microblaze.c -@@ -917,7 +917,7 @@ md_assemble (char * str) - unsigned reg2; - unsigned reg3; - unsigned isize; -- unsigned int immed, temp; -+ unsigned int immed, immed2, temp; - expressionS exp; - char name[20]; - -@@ -1172,7 +1172,76 @@ md_assemble (char * str) - inst |= (reg2 << RA_LOW) & RA_MASK; - inst |= (immed << IMM_LOW) & IMM5_MASK; - break; -+ case INST_TYPE_RD_R1_IMM5_IMM5: -+ if (strcmp (op_end, "")) -+ op_end = parse_reg (op_end + 1, ®1); /* Get rd. */ -+ else -+ { -+ as_fatal (_("Error in statement syntax")); -+ reg1 = 0; -+ } -+ if (strcmp (op_end, "")) -+ op_end = parse_reg (op_end + 1, ®2); /* Get r1. */ -+ else -+ { -+ as_fatal (_("Error in statement syntax")); -+ reg2 = 0; -+ } -+ -+ /* Check for spl registers. */ -+ if (check_spl_reg (®1)) -+ as_fatal (_("Cannot use special register with this instruction")); -+ if (check_spl_reg (®2)) -+ as_fatal (_("Cannot use special register with this instruction")); - -+ /* Width immediate value. */ -+ if (strcmp (op_end, "")) -+ op_end = parse_imm (op_end + 1, &exp, MIN_IMM_WIDTH, MAX_IMM_WIDTH); -+ else -+ as_fatal (_("Error in statement syntax")); -+ if (exp.X_op != O_constant) -+ { -+ as_warn (_("Symbol used as immediate width value for bit field instruction")); -+ immed = 1; -+ } -+ else -+ immed = exp.X_add_number; -+ if (opcode->instr == bsefi && immed > 31) -+ as_fatal (_("Width value must be less than 32")); -+ -+ /* Shift immediate value. */ -+ if (strcmp (op_end, "")) -+ op_end = parse_imm (op_end + 1, &exp, MIN_IMM, MAX_IMM); -+ else -+ as_fatal (_("Error in statement syntax")); -+ if (exp.X_op != O_constant) -+ { -+ as_warn (_("Symbol used as immediate shift value for bit field instruction")); -+ immed2 = 0; -+ } -+ else -+ { -+ output = frag_more (isize); -+ immed2 = exp.X_add_number; -+ } -+ if (immed2 != (immed2 % 32)) -+ { -+ as_warn (_("Shift value greater than 32. using <value %% 32>")); -+ immed2 = immed2 % 32; -+ } -+ -+ /* Check combined value. */ -+ if (immed + immed2 > 32) -+ as_fatal (_("Width value + shift value must not be greater than 32")); -+ -+ inst |= (reg1 << RD_LOW) & RD_MASK; -+ inst |= (reg2 << RA_LOW) & RA_MASK; -+ if (opcode->instr == bsefi) -+ inst |= (immed & IMM5_MASK) << IMM_WIDTH_LOW; /* bsefi */ -+ else -+ inst |= ((immed + immed2 - 1) & IMM5_MASK) << IMM_WIDTH_LOW; /* bsifi */ -+ inst |= (immed2 << IMM_LOW) & IMM5_MASK; -+ break; - case INST_TYPE_R1_R2: - if (strcmp (op_end, "")) - op_end = parse_reg (op_end + 1, ®1); /* Get r1. */ -diff --git a/opcodes/microblaze-dis.c b/opcodes/microblaze-dis.c -index f691740..f8aaf27 100644 ---- a/opcodes/microblaze-dis.c -+++ b/opcodes/microblaze-dis.c -@@ -74,6 +74,18 @@ get_field_imm5_mbar (long instr) - } - - static char * -+get_field_imm5width (long instr) -+{ -+ char tmpstr[25]; -+ -+ if (instr & 0x00004000) -+ sprintf (tmpstr, "%d", (short)(((instr & IMM5_WIDTH_MASK) >> IMM_WIDTH_LOW))); /* bsefi */ -+ else -+ sprintf (tmpstr, "%d", (short)(((instr & IMM5_WIDTH_MASK) >> IMM_WIDTH_LOW) - ((instr & IMM5_MASK) >> IMM_LOW) + 1)); /* bsifi */ -+ return (strdup (tmpstr)); -+} -+ -+static char * - get_field_rfsl (long instr) - { - char tmpstr[25]; -@@ -396,6 +408,10 @@ print_insn_microblaze (bfd_vma memaddr, struct disassemble_info * info) - /* For mbar 16 or sleep insn. */ - case INST_TYPE_NONE: - break; -+ /* For bit field insns. */ -+ case INST_TYPE_RD_R1_IMM5_IMM5: -+ print_func (stream, "\t%s, %s, %s, %s", get_field_rd (inst),get_field_r1(inst),get_field_imm5width (inst), get_field_imm5 (inst)); -+ break; - /* For tuqula instruction */ - case INST_TYPE_RD: - print_func (stream, "\t%s", get_field_rd (inst)); -diff --git a/opcodes/microblaze-opc.h b/opcodes/microblaze-opc.h -index 2a6b841..ce8ac35 100644 ---- a/opcodes/microblaze-opc.h -+++ b/opcodes/microblaze-opc.h -@@ -59,6 +59,9 @@ - /* For mbar. */ - #define INST_TYPE_IMM5 20 - -+/* For bsefi and bsifi */ -+#define INST_TYPE_RD_R1_IMM5_IMM5 21 -+ - #define INST_TYPE_NONE 25 - - -@@ -89,7 +92,9 @@ - #define OPCODE_MASK_H124 0xFFFF07FF /* High 16, and low 11 bits. */ - #define OPCODE_MASK_H1234 0xFFFFFFFF /* All 32 bits. */ - #define OPCODE_MASK_H3 0xFC000600 /* High 6 bits and bits 21, 22. */ -+#define OPCODE_MASK_H3B 0xFC00C600 /* High 6 bits and bits 16, 17, 21, 22. */ - #define OPCODE_MASK_H32 0xFC00FC00 /* High 6 bits and bit 16-21. */ -+#define OPCODE_MASK_H32B 0xFC00C000 /* High 6 bits and bit 16, 17. */ - #define OPCODE_MASK_H34B 0xFC0000FF /* High 6 bits and low 8 bits. */ - #define OPCODE_MASK_H35B 0xFC0004FF /* High 6 bits and low 9 bits. */ - #define OPCODE_MASK_H34C 0xFC0007E0 /* High 6 bits and bits 21-26. */ -@@ -102,7 +107,7 @@ - #define DELAY_SLOT 1 - #define NO_DELAY_SLOT 0 - --#define MAX_OPCODES 299 -+#define MAX_OPCODES 301 - - struct op_code_struct - { -@@ -159,6 +164,8 @@ struct op_code_struct - {"bslli", INST_TYPE_RD_R1_IMM5, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x64000400, OPCODE_MASK_H3, bslli, barrel_shift_inst }, - {"bsrai", INST_TYPE_RD_R1_IMM5, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x64000200, OPCODE_MASK_H3, bsrai, barrel_shift_inst }, - {"bsrli", INST_TYPE_RD_R1_IMM5, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x64000000, OPCODE_MASK_H3, bsrli, barrel_shift_inst }, -+ {"bsefi", INST_TYPE_RD_R1_IMM5_IMM5, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x64004000, OPCODE_MASK_H32B, bsefi, barrel_shift_inst }, -+ {"bsifi", INST_TYPE_RD_R1_IMM5_IMM5, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x64008000, OPCODE_MASK_H32B, bsifi, barrel_shift_inst }, - {"or", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x80000000, OPCODE_MASK_H4, microblaze_or, logical_inst }, - {"and", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x84000000, OPCODE_MASK_H4, microblaze_and, logical_inst }, - {"xor", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x88000000, OPCODE_MASK_H4, microblaze_xor, logical_inst }, -@@ -438,5 +445,8 @@ char pvr_register_prefix[] = "rpvr"; - #define MIN_IMM5 ((int) 0x00000000) - #define MAX_IMM5 ((int) 0x0000001f) - -+#define MIN_IMM_WIDTH ((int) 0x00000001) -+#define MAX_IMM_WIDTH ((int) 0x00000020) -+ - #endif /* MICROBLAZE_OPC */ - -diff --git a/opcodes/microblaze-opcm.h b/opcodes/microblaze-opcm.h -index 1c39dbf..2866269 100644 ---- a/opcodes/microblaze-opcm.h -+++ b/opcodes/microblaze-opcm.h -@@ -29,7 +29,7 @@ enum microblaze_instr - addi, rsubi, addic, rsubic, addik, rsubik, addikc, rsubikc, mul, - mulh, mulhu, mulhsu,swapb,swaph, - idiv, idivu, bsll, bsra, bsrl, get, put, nget, nput, cget, cput, -- ncget, ncput, muli, bslli, bsrai, bsrli, mului, -+ ncget, ncput, muli, bslli, bsrai, bsrli, bsefi, bsifi, mului, - /* 'or/and/xor' are C++ keywords. */ - microblaze_or, microblaze_and, microblaze_xor, - andn, pcmpbf, pcmpbc, pcmpeq, pcmpne, sra, src, srl, sext8, sext16, -@@ -129,6 +129,7 @@ enum microblaze_instr_type - #define RB_LOW 11 /* Low bit for RB. */ - #define IMM_LOW 0 /* Low bit for immediate. */ - #define IMM_MBAR 21 /* low bit for mbar instruction. */ -+#define IMM_WIDTH_LOW 6 /* Low bit for immediate width */ - - #define RD_MASK 0x03E00000 - #define RA_MASK 0x001F0000 -@@ -141,6 +142,9 @@ enum microblaze_instr_type - /* Imm mask for mbar. */ - #define IMM5_MBAR_MASK 0x03E00000 - -+/* Imm mask for extract/insert width. */ -+#define IMM5_WIDTH_MASK 0x000007C0 -+ - /* FSL imm mask for get, put instructions. */ - #define RFSL_MASK 0x000000F - diff --git a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0011-fixing-the-imm-bug.patch b/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0011-fixing-the-imm-bug.patch deleted file mode 100644 index 43d368c3..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0011-fixing-the-imm-bug.patch +++ /dev/null @@ -1,26 +0,0 @@ -From cb65478b8ec240b372a9da7fe33875a59e89a1fe Mon Sep 17 00:00:00 2001 -From: Nagaraju Mekala <nmekala@xilix.com> -Date: Mon, 10 Jul 2017 16:07:28 +0530 -Subject: [PATCH] fixing the imm bug. with relax option imm -1 is also getting - removed this is corrected now. - -Signed-off-by: Nagaraju Mekala <nagaraju.mekala@xilinx.com> - ---- - bfd/elf32-microblaze.c | 3 +-- - 1 file changed, 1 insertion(+), 2 deletions(-) - -diff --git a/bfd/elf32-microblaze.c b/bfd/elf32-microblaze.c -index d19a6dc..d001437 100644 ---- a/bfd/elf32-microblaze.c -+++ b/bfd/elf32-microblaze.c -@@ -1869,8 +1869,7 @@ microblaze_elf_relax_section (bfd *abfd, - else - symval += irel->r_addend; - -- if ((symval & 0xffff8000) == 0 -- || (symval & 0xffff8000) == 0xffff8000) -+ if ((symval & 0xffff8000) == 0) - { - /* We can delete this instruction. */ - sec->relax[sec->relax_count].addr = irel->r_offset; diff --git a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0012-Patch-Microblaze-fixed-bug-in-GCC-so-that-It-will-su.patch b/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0012-Patch-Microblaze-fixed-bug-in-GCC-so-that-It-will-su.patch deleted file mode 100644 index 9abed968..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0012-Patch-Microblaze-fixed-bug-in-GCC-so-that-It-will-su.patch +++ /dev/null @@ -1,33 +0,0 @@ -From 58271555959fcc3eadb1f23c8d31d793c979984b Mon Sep 17 00:00:00 2001 -From: Mahesh Bodapati <mbodapat@xilinx.com> -Date: Fri, 29 Sep 2017 18:00:23 +0530 -Subject: [PATCH] fixed bug in GCC so that It will support .long 0U and .long - 0u - -Signed-off-by: Mahesh Bodapati <mbodapat@xilinx.com> -Signed-off-by: Nagaraju Mekala <nagaraju.mekala@xilinx.com> - ---- - gas/expr.c | 9 +++++++++ - 1 file changed, 9 insertions(+) - -diff --git a/gas/expr.c b/gas/expr.c -index ee85bda..b502418 100644 ---- a/gas/expr.c -+++ b/gas/expr.c -@@ -810,6 +810,15 @@ operand (expressionS *expressionP, enum expr_mode mode) - break; - } - } -+ if ((*input_line_pointer == 'U') || (*input_line_pointer == 'u')) -+ { -+ input_line_pointer--; -+ -+ integer_constant ((NUMBERS_WITH_SUFFIX || flag_m68k_mri) -+ ? 0 : 10, -+ expressionP); -+ break; -+ } - c = *input_line_pointer; - switch (c) - { diff --git a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0013-fixing-the-constant-range-check-issue.patch b/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0013-fixing-the-constant-range-check-issue.patch deleted file mode 100644 index 4aef7c98..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0013-fixing-the-constant-range-check-issue.patch +++ /dev/null @@ -1,25 +0,0 @@ -From 70ba2154c2261d5a9d35a765c29acc5fdcdeea38 Mon Sep 17 00:00:00 2001 -From: Nagaraju Mekala <nmekala@xilix.com> -Date: Mon, 16 Oct 2017 15:44:23 +0530 -Subject: [PATCH] fixing the constant range check issue sample error: not in - range ffffffff80000000..7fffffff, not ffffffff70000000 - -Signed-off-by: Nagaraju Mekala <nagaraju.mekala@xilinx.com> - ---- - gas/config/tc-microblaze.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/gas/config/tc-microblaze.c b/gas/config/tc-microblaze.c -index 71bb888..16b10d0 100644 ---- a/gas/config/tc-microblaze.c -+++ b/gas/config/tc-microblaze.c -@@ -757,7 +757,7 @@ parse_imm (char * s, expressionS * e, offsetT min, offsetT max) - if ((e->X_add_number >> 31) == 1) - e->X_add_number |= -((addressT) (1U << 31)); - -- if (e->X_add_number < min || e->X_add_number > max) -+ if ((int)e->X_add_number < min || (int)e->X_add_number > max) - { - as_fatal (_("operand must be absolute in range %lx..%lx, not %lx"), - (long) min, (long) max, (long) e->X_add_number); diff --git a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0014-Patch-Microblaze-Compiler-will-give-error-messages-i.patch b/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0014-Patch-Microblaze-Compiler-will-give-error-messages-i.patch deleted file mode 100644 index 21182569..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0014-Patch-Microblaze-Compiler-will-give-error-messages-i.patch +++ /dev/null @@ -1,36 +0,0 @@ -From 1b8f6099c5f85d77ef666becff1c4edd0aa724ab Mon Sep 17 00:00:00 2001 -From: Mahesh Bodapati <mbodapat@xilinx.com> -Date: Wed, 21 Feb 2018 12:32:02 +0530 -Subject: [PATCH] Compiler will give error messages in more detail for - mxl-gp-opt flag.. - -Signed-off-by: Mahesh Bodapati <mbodapat@xilinx.com> -Signed-off-by: Nagaraju Mekala <nagaraju.mekala@xilinx.com> - ---- - ld/ldmain.c | 12 ++++++++++++ - 1 file changed, 12 insertions(+) - -diff --git a/ld/ldmain.c b/ld/ldmain.c -index 725512f..2ed413a 100644 ---- a/ld/ldmain.c -+++ b/ld/ldmain.c -@@ -1448,6 +1448,18 @@ reloc_overflow (struct bfd_link_info *info, - break; - case bfd_link_hash_defined: - case bfd_link_hash_defweak: -+ -+ if((strcmp(reloc_name,"R_MICROBLAZE_SRW32") == 0) && entry->type == bfd_link_hash_defined) -+ { -+ einfo (_(" relocation truncated to fit: don't enable small data pointer optimizations[mxl-gp-opt] if extern or multiple declarations used: " -+ "%s against symbol `%T' defined in %A section in %B"), -+ reloc_name, entry->root.string, -+ entry->u.def.section, -+ entry->u.def.section == bfd_abs_section_ptr -+ ? info->output_bfd : entry->u.def.section->owner); -+ break; -+ } -+ - einfo (_(" relocation truncated to fit: " - "%s against symbol `%pT' defined in %pA section in %pB"), - reloc_name, entry->root.string, diff --git a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0015-intial-commit-of-MB-64-bit.patch b/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0015-intial-commit-of-MB-64-bit.patch deleted file mode 100644 index 1afe8307..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0015-intial-commit-of-MB-64-bit.patch +++ /dev/null @@ -1,4738 +0,0 @@ -From e0a7cf883ed02a73fda5f7d3e131afc8f1ebe416 Mon Sep 17 00:00:00 2001 -From: Nagaraju Mekala <nmekala@xilix.com> -Date: Sun, 30 Sep 2018 16:28:28 +0530 -Subject: [PATCH] intial commit of MB 64-bit - -Signed-off-by: Mahesh Bodapati <mbodapat@xilinx.com> -Signed-off-by: Nagaraju Mekala <nagaraju.mekala@xilinx.com> - ---- - bfd/Makefile.am | 2 + - bfd/Makefile.in | 3 + - bfd/config.bfd | 4 + - bfd/configure | 2 + - bfd/configure.ac | 2 + - bfd/cpu-microblaze.c | 52 +- - bfd/elf64-microblaze.c | 3584 ++++++++++++++++++++++++++++++++++++ - bfd/targets.c | 6 + - gas/config/tc-microblaze.c | 274 ++- - gas/config/tc-microblaze.h | 4 +- - include/elf/common.h | 1 + - ld/Makefile.am | 8 + - ld/Makefile.in | 10 + - ld/configure.tgt | 3 + - ld/emulparams/elf64microblaze.sh | 23 + - ld/emulparams/elf64microblazeel.sh | 23 + - opcodes/microblaze-dis.c | 39 +- - opcodes/microblaze-opc.h | 162 +- - opcodes/microblaze-opcm.h | 20 +- - 19 files changed, 4181 insertions(+), 41 deletions(-) - create mode 100644 bfd/elf64-microblaze.c - create mode 100644 ld/emulparams/elf64microblaze.sh - create mode 100644 ld/emulparams/elf64microblazeel.sh - -diff --git a/bfd/Makefile.am b/bfd/Makefile.am -index a919155..c5fd250 100644 ---- a/bfd/Makefile.am -+++ b/bfd/Makefile.am -@@ -570,6 +570,7 @@ BFD64_BACKENDS = \ - elf64-riscv.lo \ - elfxx-riscv.lo \ - elf64-s390.lo \ -+ elf64-microblaze.lo \ - elf64-sparc.lo \ - elf64-tilegx.lo \ - elf64-x86-64.lo \ -@@ -603,6 +604,7 @@ BFD64_BACKENDS_CFILES = \ - elf64-nfp.c \ - elf64-ppc.c \ - elf64-s390.c \ -+ elf64-microblaze.c \ - elf64-sparc.c \ - elf64-tilegx.c \ - elf64-x86-64.c \ -diff --git a/bfd/Makefile.in b/bfd/Makefile.in -index 896df52..fd457cb 100644 ---- a/bfd/Makefile.in -+++ b/bfd/Makefile.in -@@ -995,6 +995,7 @@ BFD64_BACKENDS = \ - elf64-riscv.lo \ - elfxx-riscv.lo \ - elf64-s390.lo \ -+ elf64-microblaze.lo \ - elf64-sparc.lo \ - elf64-tilegx.lo \ - elf64-x86-64.lo \ -@@ -1028,6 +1029,7 @@ BFD64_BACKENDS_CFILES = \ - elf64-nfp.c \ - elf64-ppc.c \ - elf64-s390.c \ -+ elf64-microblaze.c \ - elf64-sparc.c \ - elf64-tilegx.c \ - elf64-x86-64.c \ -@@ -1494,6 +1496,7 @@ distclean-compile: - @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/elf64-ppc.Plo@am__quote@ - @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/elf64-riscv.Plo@am__quote@ - @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/elf64-s390.Plo@am__quote@ -+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/elf64-microblaze.Plo@am__quote@ - @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/elf64-sparc.Plo@am__quote@ - @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/elf64-tilegx.Plo@am__quote@ - @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/elf64-x86-64.Plo@am__quote@ -diff --git a/bfd/config.bfd b/bfd/config.bfd -index aef1448..8072c8a 100644 ---- a/bfd/config.bfd -+++ b/bfd/config.bfd -@@ -850,11 +850,15 @@ case "${targ}" in - microblazeel*-*) - targ_defvec=microblaze_elf32_le_vec - targ_selvecs=microblaze_elf32_vec -+ targ64_selvecs=microblaze_elf64_vec -+ targ64_selvecs=microblaze_elf64_le_vec - ;; - - microblaze*-*) - targ_defvec=microblaze_elf32_vec - targ_selvecs=microblaze_elf32_le_vec -+ targ64_selvecs=microblaze_elf64_vec -+ targ64_selvecs=microblaze_elf64_le_vec - ;; - - #ifdef BFD64 -diff --git a/bfd/configure b/bfd/configure -index e5bde48..5bf94d5 100755 ---- a/bfd/configure -+++ b/bfd/configure -@@ -15502,6 +15502,8 @@ do - rx_elf32_linux_le_vec) tb="$tb elf32-rx.lo elf32.lo $elf" ;; - s390_elf32_vec) tb="$tb elf32-s390.lo elf32.lo $elf" ;; - s390_elf64_vec) tb="$tb elf64-s390.lo elf64.lo $elf"; target_size=64 ;; -+ microblaze_elf64_vec) tb="$tb elf64-microblaze.lo elf64.lo $elf"; target_size=64 ;; -+ microblaze_elf64_le_vec) tb="$tb elf64-microblaze.lo elf64.lo $elf"; target_size=64 ;; - score_elf32_be_vec) tb="$tb elf32-score.lo elf32-score7.lo elf32.lo $elf"; want64=true; target_size=64 ;; - score_elf32_le_vec) tb="$tb elf32-score.lo elf32-score7.lo elf32.lo $elf"; want64=true; target_size=64 ;; - sh_coff_vec) tb="$tb coff-sh.lo $coff" ;; -diff --git a/bfd/configure.ac b/bfd/configure.ac -index 7cdf9c8..998a651 100644 ---- a/bfd/configure.ac -+++ b/bfd/configure.ac -@@ -615,6 +615,8 @@ do - rx_elf32_linux_le_vec) tb="$tb elf32-rx.lo elf32.lo $elf" ;; - s390_elf32_vec) tb="$tb elf32-s390.lo elf32.lo $elf" ;; - s390_elf64_vec) tb="$tb elf64-s390.lo elf64.lo $elf"; target_size=64 ;; -+ microblaze_elf64_vec) tb="$tb elf64-microblaze.lo elf64.lo $elf"; target_size=64 ;; -+ microblaze_elf64_le_vec) tb="$tb elf64-microblaze.lo elf64.lo $elf"; target_size=64 ;; - score_elf32_be_vec) tb="$tb elf32-score.lo elf32-score7.lo elf32.lo $elf"; want64=true; target_size=64 ;; - score_elf32_le_vec) tb="$tb elf32-score.lo elf32-score7.lo elf32.lo $elf"; want64=true; target_size=64 ;; - sh_coff_vec) tb="$tb coff-sh.lo $coff" ;; -diff --git a/bfd/cpu-microblaze.c b/bfd/cpu-microblaze.c -index 9bc2eb3..c91ba46 100644 ---- a/bfd/cpu-microblaze.c -+++ b/bfd/cpu-microblaze.c -@@ -23,7 +23,24 @@ - #include "bfd.h" - #include "libbfd.h" - --const bfd_arch_info_type bfd_microblaze_arch = -+const bfd_arch_info_type bfd_microblaze_arch[] = -+{ -+#if BFD_DEFAULT_TARGET_SIZE == 64 -+{ -+ 64, /* 32 bits in a word. */ -+ 64, /* 32 bits in an address. */ -+ 8, /* 8 bits in a byte. */ -+ bfd_arch_microblaze, /* Architecture. */ -+ 0, /* Machine number - 0 for now. */ -+ "microblaze", /* Architecture name. */ -+ "MicroBlaze", /* Printable name. */ -+ 3, /* Section align power. */ -+ FALSE, /* Is this the default architecture ? */ -+ bfd_default_compatible, /* Architecture comparison function. */ -+ bfd_default_scan, /* String to architecture conversion. */ -+ bfd_arch_default_fill, /* Default fill. */ -+ &bfd_microblaze_arch[1] /* Next in list. */ -+}, - { - 32, /* 32 bits in a word. */ - 32, /* 32 bits in an address. */ -@@ -38,4 +55,37 @@ const bfd_arch_info_type bfd_microblaze_arch = - bfd_default_scan, /* String to architecture conversion. */ - bfd_arch_default_fill, /* Default fill. */ - NULL /* Next in list. */ -+} -+#else -+{ -+ 32, /* 32 bits in a word. */ -+ 32, /* 32 bits in an address. */ -+ 8, /* 8 bits in a byte. */ -+ bfd_arch_microblaze, /* Architecture. */ -+ 0, /* Machine number - 0 for now. */ -+ "microblaze", /* Architecture name. */ -+ "MicroBlaze", /* Printable name. */ -+ 3, /* Section align power. */ -+ TRUE, /* Is this the default architecture ? */ -+ bfd_default_compatible, /* Architecture comparison function. */ -+ bfd_default_scan, /* String to architecture conversion. */ -+ bfd_arch_default_fill, /* Default fill. */ -+ &bfd_microblaze_arch[1] /* Next in list. */ -+}, -+{ -+ 64, /* 32 bits in a word. */ -+ 64, /* 32 bits in an address. */ -+ 8, /* 8 bits in a byte. */ -+ bfd_arch_microblaze, /* Architecture. */ -+ 0, /* Machine number - 0 for now. */ -+ "microblaze", /* Architecture name. */ -+ "MicroBlaze", /* Printable name. */ -+ 3, /* Section align power. */ -+ FALSE, /* Is this the default architecture ? */ -+ bfd_default_compatible, /* Architecture comparison function. */ -+ bfd_default_scan, /* String to architecture conversion. */ -+ bfd_arch_default_fill, /* Default fill. */ -+ NULL /* Next in list. */ -+} -+#endif - }; -diff --git a/bfd/elf64-microblaze.c b/bfd/elf64-microblaze.c -new file mode 100644 -index 0000000..0f43ae6 ---- /dev/null -+++ b/bfd/elf64-microblaze.c -@@ -0,0 +1,3584 @@ -+/* Xilinx MicroBlaze-specific support for 32-bit ELF -+ -+ Copyright (C) 2009-2016 Free Software Foundation, Inc. -+ -+ This file is part of BFD, the Binary File Descriptor library. -+ -+ This program is free software; you can redistribute it and/or modify -+ it under the terms of the GNU General Public License as published by -+ the Free Software Foundation; either version 3 of the License, or -+ (at your option) any later version. -+ -+ This program is distributed in the hope that it will be useful, -+ but WITHOUT ANY WARRANTY; without even the implied warranty of -+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ GNU General Public License for more details. -+ -+ You should have received a copy of the GNU General Public License -+ along with this program; if not, write to the -+ Free Software Foundation, Inc., 51 Franklin Street - Fifth Floor, -+ Boston, MA 02110-1301, USA. */ -+ -+ -+int dbg1 = 0; -+ -+#include "sysdep.h" -+#include "bfd.h" -+#include "bfdlink.h" -+#include "libbfd.h" -+#include "elf-bfd.h" -+#include "elf/microblaze.h" -+#include <assert.h> -+ -+#define USE_RELA /* Only USE_REL is actually significant, but this is -+ here are a reminder... */ -+#define INST_WORD_SIZE 4 -+ -+static int ro_small_data_pointer = 0; -+static int rw_small_data_pointer = 0; -+ -+static reloc_howto_type * microblaze_elf_howto_table [(int) R_MICROBLAZE_max]; -+ -+static reloc_howto_type microblaze_elf_howto_raw[] = -+{ -+ /* This reloc does nothing. */ -+ HOWTO (R_MICROBLAZE_NONE, /* Type. */ -+ 0, /* Rightshift. */ -+ 3, /* Size (0 = byte, 1 = short, 2 = long). */ -+ 0, /* Bitsize. */ -+ FALSE, /* PC_relative. */ -+ 0, /* Bitpos. */ -+ complain_overflow_dont, /* Complain on overflow. */ -+ NULL, /* Special Function. */ -+ "R_MICROBLAZE_NONE", /* Name. */ -+ FALSE, /* Partial Inplace. */ -+ 0, /* Source Mask. */ -+ 0, /* Dest Mask. */ -+ FALSE), /* PC relative offset? */ -+ -+ /* A standard 32 bit relocation. */ -+ HOWTO (R_MICROBLAZE_32, /* Type. */ -+ 0, /* Rightshift. */ -+ 2, /* Size (0 = byte, 1 = short, 2 = long). */ -+ 32, /* Bitsize. */ -+ FALSE, /* PC_relative. */ -+ 0, /* Bitpos. */ -+ complain_overflow_bitfield, /* Complain on overflow. */ -+ bfd_elf_generic_reloc,/* Special Function. */ -+ "R_MICROBLAZE_32", /* Name. */ -+ FALSE, /* Partial Inplace. */ -+ 0, /* Source Mask. */ -+ 0xffffffff, /* Dest Mask. */ -+ FALSE), /* PC relative offset? */ -+ -+ /* A standard PCREL 32 bit relocation. */ -+ HOWTO (R_MICROBLAZE_32_PCREL,/* Type. */ -+ 0, /* Rightshift. */ -+ 2, /* Size (0 = byte, 1 = short, 2 = long). */ -+ 32, /* Bitsize. */ -+ TRUE, /* PC_relative. */ -+ 0, /* Bitpos. */ -+ complain_overflow_bitfield, /* Complain on overflow. */ -+ bfd_elf_generic_reloc,/* Special Function. */ -+ "R_MICROBLAZE_32_PCREL", /* Name. */ -+ TRUE, /* Partial Inplace. */ -+ 0, /* Source Mask. */ -+ 0xffffffff, /* Dest Mask. */ -+ TRUE), /* PC relative offset? */ -+ -+ /* A 64 bit PCREL relocation. Table-entry not really used. */ -+ HOWTO (R_MICROBLAZE_64_PCREL,/* Type. */ -+ 0, /* Rightshift. */ -+ 4, /* Size (0 = byte, 1 = short, 2 = long). */ -+ 64, /* Bitsize. */ -+ TRUE, /* PC_relative. */ -+ 0, /* Bitpos. */ -+ complain_overflow_dont, /* Complain on overflow. */ -+ bfd_elf_generic_reloc,/* Special Function. */ -+ "R_MICROBLAZE_64_PCREL", /* Name. */ -+ FALSE, /* Partial Inplace. */ -+ 0, /* Source Mask. */ -+ 0x0000ffff, /* Dest Mask. */ -+ TRUE), /* PC relative offset? */ -+ -+ /* The low half of a PCREL 32 bit relocation. */ -+ HOWTO (R_MICROBLAZE_32_PCREL_LO, /* Type. */ -+ 0, /* Rightshift. */ -+ 2, /* Size (0 = byte, 1 = short, 2 = long). */ -+ 16, /* Bitsize. */ -+ TRUE, /* PC_relative. */ -+ 0, /* Bitpos. */ -+ complain_overflow_signed, /* Complain on overflow. */ -+ bfd_elf_generic_reloc, /* Special Function. */ -+ "R_MICROBLAZE_32_PCREL_LO", /* Name. */ -+ FALSE, /* Partial Inplace. */ -+ 0, /* Source Mask. */ -+ 0x0000ffff, /* Dest Mask. */ -+ TRUE), /* PC relative offset? */ -+ -+ /* A 64 bit relocation. Table entry not really used. */ -+ HOWTO (R_MICROBLAZE_64, /* Type. */ -+ 0, /* Rightshift. */ -+ 2, /* Size (0 = byte, 1 = short, 2 = long). */ -+ 16, /* Bitsize. */ -+ FALSE, /* PC_relative. */ -+ 0, /* Bitpos. */ -+ complain_overflow_dont, /* Complain on overflow. */ -+ bfd_elf_generic_reloc,/* Special Function. */ -+ "R_MICROBLAZE_64", /* Name. */ -+ FALSE, /* Partial Inplace. */ -+ 0, /* Source Mask. */ -+ 0x0000ffff, /* Dest Mask. */ -+ FALSE), /* PC relative offset? */ -+ -+ /* The low half of a 32 bit relocation. */ -+ HOWTO (R_MICROBLAZE_32_LO, /* Type. */ -+ 0, /* Rightshift. */ -+ 2, /* Size (0 = byte, 1 = short, 2 = long). */ -+ 16, /* Bitsize. */ -+ FALSE, /* PC_relative. */ -+ 0, /* Bitpos. */ -+ complain_overflow_signed, /* Complain on overflow. */ -+ bfd_elf_generic_reloc,/* Special Function. */ -+ "R_MICROBLAZE_32_LO", /* Name. */ -+ FALSE, /* Partial Inplace. */ -+ 0, /* Source Mask. */ -+ 0x0000ffff, /* Dest Mask. */ -+ FALSE), /* PC relative offset? */ -+ -+ /* Read-only small data section relocation. */ -+ HOWTO (R_MICROBLAZE_SRO32, /* Type. */ -+ 0, /* Rightshift. */ -+ 2, /* Size (0 = byte, 1 = short, 2 = long). */ -+ 16, /* Bitsize. */ -+ FALSE, /* PC_relative. */ -+ 0, /* Bitpos. */ -+ complain_overflow_bitfield, /* Complain on overflow. */ -+ bfd_elf_generic_reloc,/* Special Function. */ -+ "R_MICROBLAZE_SRO32", /* Name. */ -+ FALSE, /* Partial Inplace. */ -+ 0, /* Source Mask. */ -+ 0x0000ffff, /* Dest Mask. */ -+ FALSE), /* PC relative offset? */ -+ -+ /* Read-write small data area relocation. */ -+ HOWTO (R_MICROBLAZE_SRW32, /* Type. */ -+ 0, /* Rightshift. */ -+ 2, /* Size (0 = byte, 1 = short, 2 = long). */ -+ 16, /* Bitsize. */ -+ FALSE, /* PC_relative. */ -+ 0, /* Bitpos. */ -+ complain_overflow_bitfield, /* Complain on overflow. */ -+ bfd_elf_generic_reloc,/* Special Function. */ -+ "R_MICROBLAZE_SRW32", /* Name. */ -+ FALSE, /* Partial Inplace. */ -+ 0, /* Source Mask. */ -+ 0x0000ffff, /* Dest Mask. */ -+ FALSE), /* PC relative offset? */ -+ -+ HOWTO (R_MICROBLAZE_32_NONE, /* Type. */ -+ 0, /* Rightshift. */ -+ 2, /* Size (0 = byte, 1 = short, 2 = long). */ -+ 32, /* Bitsize. */ -+ TRUE, /* PC_relative. */ -+ 0, /* Bitpos. */ -+ complain_overflow_bitfield, /* Complain on overflow. */ -+ NULL, /* Special Function. */ -+ "R_MICROBLAZE_32_NONE",/* Name. */ -+ FALSE, /* Partial Inplace. */ -+ 0, /* Source Mask. */ -+ 0, /* Dest Mask. */ -+ FALSE), /* PC relative offset? */ -+ -+ /* This reloc does nothing. Used for relaxation. */ -+ HOWTO (R_MICROBLAZE_64_NONE, /* Type. */ -+ 0, /* Rightshift. */ -+ 3, /* Size (0 = byte, 1 = short, 2 = long). */ -+ 0, /* Bitsize. */ -+ TRUE, /* PC_relative. */ -+ 0, /* Bitpos. */ -+ complain_overflow_dont, /* Complain on overflow. */ -+ NULL, /* Special Function. */ -+ "R_MICROBLAZE_64_NONE",/* Name. */ -+ FALSE, /* Partial Inplace. */ -+ 0, /* Source Mask. */ -+ 0, /* Dest Mask. */ -+ FALSE), /* PC relative offset? */ -+ -+ /* Symbol Op Symbol relocation. */ -+ HOWTO (R_MICROBLAZE_32_SYM_OP_SYM, /* Type. */ -+ 0, /* Rightshift. */ -+ 2, /* Size (0 = byte, 1 = short, 2 = long). */ -+ 32, /* Bitsize. */ -+ FALSE, /* PC_relative. */ -+ 0, /* Bitpos. */ -+ complain_overflow_bitfield, /* Complain on overflow. */ -+ bfd_elf_generic_reloc,/* Special Function. */ -+ "R_MICROBLAZE_32_SYM_OP_SYM", /* Name. */ -+ FALSE, /* Partial Inplace. */ -+ 0, /* Source Mask. */ -+ 0xffffffff, /* Dest Mask. */ -+ FALSE), /* PC relative offset? */ -+ -+ /* GNU extension to record C++ vtable hierarchy. */ -+ HOWTO (R_MICROBLAZE_GNU_VTINHERIT, /* Type. */ -+ 0, /* Rightshift. */ -+ 2, /* Size (0 = byte, 1 = short, 2 = long). */ -+ 0, /* Bitsize. */ -+ FALSE, /* PC_relative. */ -+ 0, /* Bitpos. */ -+ complain_overflow_dont,/* Complain on overflow. */ -+ NULL, /* Special Function. */ -+ "R_MICROBLAZE_GNU_VTINHERIT", /* Name. */ -+ FALSE, /* Partial Inplace. */ -+ 0, /* Source Mask. */ -+ 0, /* Dest Mask. */ -+ FALSE), /* PC relative offset? */ -+ -+ /* GNU extension to record C++ vtable member usage. */ -+ HOWTO (R_MICROBLAZE_GNU_VTENTRY, /* Type. */ -+ 0, /* Rightshift. */ -+ 2, /* Size (0 = byte, 1 = short, 2 = long). */ -+ 0, /* Bitsize. */ -+ FALSE, /* PC_relative. */ -+ 0, /* Bitpos. */ -+ complain_overflow_dont,/* Complain on overflow. */ -+ _bfd_elf_rel_vtable_reloc_fn, /* Special Function. */ -+ "R_MICROBLAZE_GNU_VTENTRY", /* Name. */ -+ FALSE, /* Partial Inplace. */ -+ 0, /* Source Mask. */ -+ 0, /* Dest Mask. */ -+ FALSE), /* PC relative offset? */ -+ -+ /* A 64 bit GOTPC relocation. Table-entry not really used. */ -+ HOWTO (R_MICROBLAZE_GOTPC_64, /* Type. */ -+ 0, /* Rightshift. */ -+ 2, /* Size (0 = byte, 1 = short, 2 = long). */ -+ 16, /* Bitsize. */ -+ TRUE, /* PC_relative. */ -+ 0, /* Bitpos. */ -+ complain_overflow_dont, /* Complain on overflow. */ -+ bfd_elf_generic_reloc, /* Special Function. */ -+ "R_MICROBLAZE_GOTPC_64", /* Name. */ -+ FALSE, /* Partial Inplace. */ -+ 0, /* Source Mask. */ -+ 0x0000ffff, /* Dest Mask. */ -+ TRUE), /* PC relative offset? */ -+ -+ /* A 64 bit GOT relocation. Table-entry not really used. */ -+ HOWTO (R_MICROBLAZE_GOT_64, /* Type. */ -+ 0, /* Rightshift. */ -+ 2, /* Size (0 = byte, 1 = short, 2 = long). */ -+ 16, /* Bitsize. */ -+ FALSE, /* PC_relative. */ -+ 0, /* Bitpos. */ -+ complain_overflow_dont, /* Complain on overflow. */ -+ bfd_elf_generic_reloc,/* Special Function. */ -+ "R_MICROBLAZE_GOT_64",/* Name. */ -+ FALSE, /* Partial Inplace. */ -+ 0, /* Source Mask. */ -+ 0x0000ffff, /* Dest Mask. */ -+ FALSE), /* PC relative offset? */ -+ -+ /* A 64 bit PLT relocation. Table-entry not really used. */ -+ HOWTO (R_MICROBLAZE_PLT_64, /* Type. */ -+ 0, /* Rightshift. */ -+ 2, /* Size (0 = byte, 1 = short, 2 = long). */ -+ 16, /* Bitsize. */ -+ TRUE, /* PC_relative. */ -+ 0, /* Bitpos. */ -+ complain_overflow_dont, /* Complain on overflow. */ -+ bfd_elf_generic_reloc,/* Special Function. */ -+ "R_MICROBLAZE_PLT_64",/* Name. */ -+ FALSE, /* Partial Inplace. */ -+ 0, /* Source Mask. */ -+ 0x0000ffff, /* Dest Mask. */ -+ TRUE), /* PC relative offset? */ -+ -+ /* Table-entry not really used. */ -+ HOWTO (R_MICROBLAZE_REL, /* Type. */ -+ 0, /* Rightshift. */ -+ 2, /* Size (0 = byte, 1 = short, 2 = long). */ -+ 16, /* Bitsize. */ -+ TRUE, /* PC_relative. */ -+ 0, /* Bitpos. */ -+ complain_overflow_dont, /* Complain on overflow. */ -+ bfd_elf_generic_reloc,/* Special Function. */ -+ "R_MICROBLAZE_REL", /* Name. */ -+ FALSE, /* Partial Inplace. */ -+ 0, /* Source Mask. */ -+ 0x0000ffff, /* Dest Mask. */ -+ TRUE), /* PC relative offset? */ -+ -+ /* Table-entry not really used. */ -+ HOWTO (R_MICROBLAZE_JUMP_SLOT,/* Type. */ -+ 0, /* Rightshift. */ -+ 2, /* Size (0 = byte, 1 = short, 2 = long). */ -+ 16, /* Bitsize. */ -+ TRUE, /* PC_relative. */ -+ 0, /* Bitpos. */ -+ complain_overflow_dont, /* Complain on overflow. */ -+ bfd_elf_generic_reloc,/* Special Function. */ -+ "R_MICROBLAZE_JUMP_SLOT", /* Name. */ -+ FALSE, /* Partial Inplace. */ -+ 0, /* Source Mask. */ -+ 0x0000ffff, /* Dest Mask. */ -+ TRUE), /* PC relative offset? */ -+ -+ /* Table-entry not really used. */ -+ HOWTO (R_MICROBLAZE_GLOB_DAT,/* Type. */ -+ 0, /* Rightshift. */ -+ 2, /* Size (0 = byte, 1 = short, 2 = long). */ -+ 16, /* Bitsize. */ -+ TRUE, /* PC_relative. */ -+ 0, /* Bitpos. */ -+ complain_overflow_dont, /* Complain on overflow. */ -+ bfd_elf_generic_reloc,/* Special Function. */ -+ "R_MICROBLAZE_GLOB_DAT", /* Name. */ -+ FALSE, /* Partial Inplace. */ -+ 0, /* Source Mask. */ -+ 0x0000ffff, /* Dest Mask. */ -+ TRUE), /* PC relative offset? */ -+ -+ /* A 64 bit GOT relative relocation. Table-entry not really used. */ -+ HOWTO (R_MICROBLAZE_GOTOFF_64, /* Type. */ -+ 0, /* Rightshift. */ -+ 2, /* Size (0 = byte, 1 = short, 2 = long). */ -+ 16, /* Bitsize. */ -+ FALSE, /* PC_relative. */ -+ 0, /* Bitpos. */ -+ complain_overflow_dont, /* Complain on overflow. */ -+ bfd_elf_generic_reloc,/* Special Function. */ -+ "R_MICROBLAZE_GOTOFF_64", /* Name. */ -+ FALSE, /* Partial Inplace. */ -+ 0, /* Source Mask. */ -+ 0x0000ffff, /* Dest Mask. */ -+ FALSE), /* PC relative offset? */ -+ -+ /* A 32 bit GOT relative relocation. Table-entry not really used. */ -+ HOWTO (R_MICROBLAZE_GOTOFF_32, /* Type. */ -+ 0, /* Rightshift. */ -+ 2, /* Size (0 = byte, 1 = short, 2 = long). */ -+ 16, /* Bitsize. */ -+ FALSE, /* PC_relative. */ -+ 0, /* Bitpos. */ -+ complain_overflow_dont, /* Complain on overflow. */ -+ bfd_elf_generic_reloc, /* Special Function. */ -+ "R_MICROBLAZE_GOTOFF_32", /* Name. */ -+ FALSE, /* Partial Inplace. */ -+ 0, /* Source Mask. */ -+ 0x0000ffff, /* Dest Mask. */ -+ FALSE), /* PC relative offset? */ -+ -+ /* COPY relocation. Table-entry not really used. */ -+ HOWTO (R_MICROBLAZE_COPY, /* Type. */ -+ 0, /* Rightshift. */ -+ 2, /* Size (0 = byte, 1 = short, 2 = long). */ -+ 16, /* Bitsize. */ -+ FALSE, /* PC_relative. */ -+ 0, /* Bitpos. */ -+ complain_overflow_dont, /* Complain on overflow. */ -+ bfd_elf_generic_reloc,/* Special Function. */ -+ "R_MICROBLAZE_COPY", /* Name. */ -+ FALSE, /* Partial Inplace. */ -+ 0, /* Source Mask. */ -+ 0x0000ffff, /* Dest Mask. */ -+ FALSE), /* PC relative offset? */ -+ -+ /* Marker relocs for TLS. */ -+ HOWTO (R_MICROBLAZE_TLS, -+ 0, /* rightshift */ -+ 2, /* size (0 = byte, 1 = short, 2 = long) */ -+ 32, /* bitsize */ -+ FALSE, /* pc_relative */ -+ 0, /* bitpos */ -+ complain_overflow_dont, /* complain_on_overflow */ -+ bfd_elf_generic_reloc, /* special_function */ -+ "R_MICROBLAZE_TLS", /* name */ -+ FALSE, /* partial_inplace */ -+ 0, /* src_mask */ -+ 0x0000ffff, /* dst_mask */ -+ FALSE), /* pcrel_offset */ -+ -+ HOWTO (R_MICROBLAZE_TLSGD, -+ 0, /* rightshift */ -+ 2, /* size (0 = byte, 1 = short, 2 = long) */ -+ 32, /* bitsize */ -+ FALSE, /* pc_relative */ -+ 0, /* bitpos */ -+ complain_overflow_dont, /* complain_on_overflow */ -+ bfd_elf_generic_reloc, /* special_function */ -+ "R_MICROBLAZE_TLSGD", /* name */ -+ FALSE, /* partial_inplace */ -+ 0, /* src_mask */ -+ 0x0000ffff, /* dst_mask */ -+ FALSE), /* pcrel_offset */ -+ -+ HOWTO (R_MICROBLAZE_TLSLD, -+ 0, /* rightshift */ -+ 2, /* size (0 = byte, 1 = short, 2 = long) */ -+ 32, /* bitsize */ -+ FALSE, /* pc_relative */ -+ 0, /* bitpos */ -+ complain_overflow_dont, /* complain_on_overflow */ -+ bfd_elf_generic_reloc, /* special_function */ -+ "R_MICROBLAZE_TLSLD", /* name */ -+ FALSE, /* partial_inplace */ -+ 0, /* src_mask */ -+ 0x0000ffff, /* dst_mask */ -+ FALSE), /* pcrel_offset */ -+ -+ /* Computes the load module index of the load module that contains the -+ definition of its TLS sym. */ -+ HOWTO (R_MICROBLAZE_TLSDTPMOD32, -+ 0, /* rightshift */ -+ 2, /* size (0 = byte, 1 = short, 2 = long) */ -+ 32, /* bitsize */ -+ FALSE, /* pc_relative */ -+ 0, /* bitpos */ -+ complain_overflow_dont, /* complain_on_overflow */ -+ bfd_elf_generic_reloc, /* special_function */ -+ "R_MICROBLAZE_TLSDTPMOD32", /* name */ -+ FALSE, /* partial_inplace */ -+ 0, /* src_mask */ -+ 0x0000ffff, /* dst_mask */ -+ FALSE), /* pcrel_offset */ -+ -+ /* Computes a dtv-relative displacement, the difference between the value -+ of sym+add and the base address of the thread-local storage block that -+ contains the definition of sym, minus 0x8000. Used for initializing GOT */ -+ HOWTO (R_MICROBLAZE_TLSDTPREL32, -+ 0, /* rightshift */ -+ 2, /* size (0 = byte, 1 = short, 2 = long) */ -+ 32, /* bitsize */ -+ FALSE, /* pc_relative */ -+ 0, /* bitpos */ -+ complain_overflow_dont, /* complain_on_overflow */ -+ bfd_elf_generic_reloc, /* special_function */ -+ "R_MICROBLAZE_TLSDTPREL32", /* name */ -+ FALSE, /* partial_inplace */ -+ 0, /* src_mask */ -+ 0x0000ffff, /* dst_mask */ -+ FALSE), /* pcrel_offset */ -+ -+ /* Computes a dtv-relative displacement, the difference between the value -+ of sym+add and the base address of the thread-local storage block that -+ contains the definition of sym, minus 0x8000. */ -+ HOWTO (R_MICROBLAZE_TLSDTPREL64, -+ 0, /* rightshift */ -+ 2, /* size (0 = byte, 1 = short, 2 = long) */ -+ 32, /* bitsize */ -+ FALSE, /* pc_relative */ -+ 0, /* bitpos */ -+ complain_overflow_dont, /* complain_on_overflow */ -+ bfd_elf_generic_reloc, /* special_function */ -+ "R_MICROBLAZE_TLSDTPREL64", /* name */ -+ FALSE, /* partial_inplace */ -+ 0, /* src_mask */ -+ 0x0000ffff, /* dst_mask */ -+ FALSE), /* pcrel_offset */ -+ -+ /* Computes a tp-relative displacement, the difference between the value of -+ sym+add and the value of the thread pointer (r13). */ -+ HOWTO (R_MICROBLAZE_TLSGOTTPREL32, -+ 0, /* rightshift */ -+ 2, /* size (0 = byte, 1 = short, 2 = long) */ -+ 32, /* bitsize */ -+ FALSE, /* pc_relative */ -+ 0, /* bitpos */ -+ complain_overflow_dont, /* complain_on_overflow */ -+ bfd_elf_generic_reloc, /* special_function */ -+ "R_MICROBLAZE_TLSGOTTPREL32", /* name */ -+ FALSE, /* partial_inplace */ -+ 0, /* src_mask */ -+ 0x0000ffff, /* dst_mask */ -+ FALSE), /* pcrel_offset */ -+ -+ /* Computes a tp-relative displacement, the difference between the value of -+ sym+add and the value of the thread pointer (r13). */ -+ HOWTO (R_MICROBLAZE_TLSTPREL32, -+ 0, /* rightshift */ -+ 2, /* size (0 = byte, 1 = short, 2 = long) */ -+ 32, /* bitsize */ -+ FALSE, /* pc_relative */ -+ 0, /* bitpos */ -+ complain_overflow_dont, /* complain_on_overflow */ -+ bfd_elf_generic_reloc, /* special_function */ -+ "R_MICROBLAZE_TLSTPREL32", /* name */ -+ FALSE, /* partial_inplace */ -+ 0, /* src_mask */ -+ 0x0000ffff, /* dst_mask */ -+ FALSE), /* pcrel_offset */ -+ -+}; -+ -+#ifndef NUM_ELEM -+#define NUM_ELEM(a) (sizeof (a) / sizeof (a)[0]) -+#endif -+ -+/* Initialize the microblaze_elf_howto_table, so that linear accesses can be done. */ -+ -+static void -+microblaze_elf_howto_init (void) -+{ -+ unsigned int i; -+ -+ for (i = NUM_ELEM (microblaze_elf_howto_raw); i--;) -+ { -+ unsigned int type; -+ -+ type = microblaze_elf_howto_raw[i].type; -+ -+ BFD_ASSERT (type < NUM_ELEM (microblaze_elf_howto_table)); -+ -+ microblaze_elf_howto_table [type] = & microblaze_elf_howto_raw [i]; -+ } -+} -+ -+static reloc_howto_type * -+microblaze_elf_reloc_type_lookup (bfd * abfd ATTRIBUTE_UNUSED, -+ bfd_reloc_code_real_type code) -+{ -+ enum elf_microblaze_reloc_type microblaze_reloc = R_MICROBLAZE_NONE; -+ -+ switch (code) -+ { -+ case BFD_RELOC_NONE: -+ microblaze_reloc = R_MICROBLAZE_NONE; -+ break; -+ case BFD_RELOC_MICROBLAZE_32_NONE: -+ microblaze_reloc = R_MICROBLAZE_32_NONE; -+ break; -+ case BFD_RELOC_MICROBLAZE_64_NONE: -+ microblaze_reloc = R_MICROBLAZE_64_NONE; -+ break; -+ case BFD_RELOC_32: -+ microblaze_reloc = R_MICROBLAZE_32; -+ break; -+ /* RVA is treated the same as 32 */ -+ case BFD_RELOC_RVA: -+ microblaze_reloc = R_MICROBLAZE_32; -+ break; -+ case BFD_RELOC_32_PCREL: -+ microblaze_reloc = R_MICROBLAZE_32_PCREL; -+ break; -+ case BFD_RELOC_64_PCREL: -+ microblaze_reloc = R_MICROBLAZE_64_PCREL; -+ break; -+ case BFD_RELOC_MICROBLAZE_32_LO_PCREL: -+ microblaze_reloc = R_MICROBLAZE_32_PCREL_LO; -+ break; -+ case BFD_RELOC_64: -+ microblaze_reloc = R_MICROBLAZE_64; -+ break; -+ case BFD_RELOC_MICROBLAZE_32_LO: -+ microblaze_reloc = R_MICROBLAZE_32_LO; -+ break; -+ case BFD_RELOC_MICROBLAZE_32_ROSDA: -+ microblaze_reloc = R_MICROBLAZE_SRO32; -+ break; -+ case BFD_RELOC_MICROBLAZE_32_RWSDA: -+ microblaze_reloc = R_MICROBLAZE_SRW32; -+ break; -+ case BFD_RELOC_MICROBLAZE_32_SYM_OP_SYM: -+ microblaze_reloc = R_MICROBLAZE_32_SYM_OP_SYM; -+ break; -+ case BFD_RELOC_VTABLE_INHERIT: -+ microblaze_reloc = R_MICROBLAZE_GNU_VTINHERIT; -+ break; -+ case BFD_RELOC_VTABLE_ENTRY: -+ microblaze_reloc = R_MICROBLAZE_GNU_VTENTRY; -+ break; -+ case BFD_RELOC_MICROBLAZE_64_GOTPC: -+ microblaze_reloc = R_MICROBLAZE_GOTPC_64; -+ break; -+ case BFD_RELOC_MICROBLAZE_64_GOT: -+ microblaze_reloc = R_MICROBLAZE_GOT_64; -+ break; -+ case BFD_RELOC_MICROBLAZE_64_PLT: -+ microblaze_reloc = R_MICROBLAZE_PLT_64; -+ break; -+ case BFD_RELOC_MICROBLAZE_64_GOTOFF: -+ microblaze_reloc = R_MICROBLAZE_GOTOFF_64; -+ break; -+ case BFD_RELOC_MICROBLAZE_32_GOTOFF: -+ microblaze_reloc = R_MICROBLAZE_GOTOFF_32; -+ break; -+ case BFD_RELOC_MICROBLAZE_64_TLSGD: -+ microblaze_reloc = R_MICROBLAZE_TLSGD; -+ break; -+ case BFD_RELOC_MICROBLAZE_64_TLSLD: -+ microblaze_reloc = R_MICROBLAZE_TLSLD; -+ break; -+ case BFD_RELOC_MICROBLAZE_32_TLSDTPREL: -+ microblaze_reloc = R_MICROBLAZE_TLSDTPREL32; -+ break; -+ case BFD_RELOC_MICROBLAZE_64_TLSDTPREL: -+ microblaze_reloc = R_MICROBLAZE_TLSDTPREL64; -+ break; -+ case BFD_RELOC_MICROBLAZE_32_TLSDTPMOD: -+ microblaze_reloc = R_MICROBLAZE_TLSDTPMOD32; -+ break; -+ case BFD_RELOC_MICROBLAZE_64_TLSGOTTPREL: -+ microblaze_reloc = R_MICROBLAZE_TLSGOTTPREL32; -+ break; -+ case BFD_RELOC_MICROBLAZE_64_TLSTPREL: -+ microblaze_reloc = R_MICROBLAZE_TLSTPREL32; -+ break; -+ case BFD_RELOC_MICROBLAZE_COPY: -+ microblaze_reloc = R_MICROBLAZE_COPY; -+ break; -+ default: -+ return (reloc_howto_type *) NULL; -+ } -+ -+ if (!microblaze_elf_howto_table [R_MICROBLAZE_32]) -+ /* Initialize howto table if needed. */ -+ microblaze_elf_howto_init (); -+ -+ return microblaze_elf_howto_table [(int) microblaze_reloc]; -+}; -+ -+static reloc_howto_type * -+microblaze_elf_reloc_name_lookup (bfd *abfd ATTRIBUTE_UNUSED, -+ const char *r_name) -+{ -+ unsigned int i; -+ -+ for (i = 0; i < NUM_ELEM (microblaze_elf_howto_raw); i++) -+ if (microblaze_elf_howto_raw[i].name != NULL -+ && strcasecmp (microblaze_elf_howto_raw[i].name, r_name) == 0) -+ return µblaze_elf_howto_raw[i]; -+ -+ return NULL; -+} -+ -+/* Set the howto pointer for a RCE ELF reloc. */ -+ -+static void -+microblaze_elf_info_to_howto (bfd * abfd ATTRIBUTE_UNUSED, -+ arelent * cache_ptr, -+ Elf_Internal_Rela * dst) -+{ -+ unsigned int r_type; -+ -+ if (!microblaze_elf_howto_table [R_MICROBLAZE_32]) -+ /* Initialize howto table if needed. */ -+ microblaze_elf_howto_init (); -+ -+ r_type = ELF64_R_TYPE (dst->r_info); -+ if (r_type >= R_MICROBLAZE_max) -+ { -+ (*_bfd_error_handler) (_("%B: unrecognised MicroBlaze reloc number: %d"), -+ abfd, r_type); -+ bfd_set_error (bfd_error_bad_value); -+ r_type = R_MICROBLAZE_NONE; -+ } -+ -+ cache_ptr->howto = microblaze_elf_howto_table [r_type]; -+} -+ -+/* Microblaze ELF local labels start with 'L.' or '$L', not '.L'. */ -+ -+static bfd_boolean -+microblaze_elf_is_local_label_name (bfd *abfd, const char *name) -+{ -+ if (name[0] == 'L' && name[1] == '.') -+ return TRUE; -+ -+ if (name[0] == '$' && name[1] == 'L') -+ return TRUE; -+ -+ /* With gcc, the labels go back to starting with '.', so we accept -+ the generic ELF local label syntax as well. */ -+ return _bfd_elf_is_local_label_name (abfd, name); -+} -+ -+/* The microblaze linker (like many others) needs to keep track of -+ the number of relocs that it decides to copy as dynamic relocs in -+ check_relocs for each symbol. This is so that it can later discard -+ them if they are found to be unnecessary. We store the information -+ in a field extending the regular ELF linker hash table. */ -+ -+struct elf64_mb_dyn_relocs -+{ -+ struct elf64_mb_dyn_relocs *next; -+ -+ /* The input section of the reloc. */ -+ asection *sec; -+ -+ /* Total number of relocs copied for the input section. */ -+ bfd_size_type count; -+ -+ /* Number of pc-relative relocs copied for the input section. */ -+ bfd_size_type pc_count; -+}; -+ -+/* ELF linker hash entry. */ -+ -+struct elf64_mb_link_hash_entry -+{ -+ struct elf_link_hash_entry elf; -+ -+ /* Track dynamic relocs copied for this symbol. */ -+ struct elf64_mb_dyn_relocs *dyn_relocs; -+ -+ /* TLS Reference Types for the symbol; Updated by check_relocs */ -+#define TLS_GD 1 /* GD reloc. */ -+#define TLS_LD 2 /* LD reloc. */ -+#define TLS_TPREL 4 /* TPREL reloc, => IE. */ -+#define TLS_DTPREL 8 /* DTPREL reloc, => LD. */ -+#define TLS_TLS 16 /* Any TLS reloc. */ -+ unsigned char tls_mask; -+ -+}; -+ -+#define IS_TLS_GD(x) (x == (TLS_TLS | TLS_GD)) -+#define IS_TLS_LD(x) (x == (TLS_TLS | TLS_LD)) -+#define IS_TLS_DTPREL(x) (x == (TLS_TLS | TLS_DTPREL)) -+#define IS_TLS_NONE(x) (x == 0) -+ -+#define elf64_mb_hash_entry(ent) ((struct elf64_mb_link_hash_entry *)(ent)) -+ -+/* ELF linker hash table. */ -+ -+struct elf64_mb_link_hash_table -+{ -+ struct elf_link_hash_table elf; -+ -+ /* Short-cuts to get to dynamic linker sections. */ -+ asection *sgot; -+ asection *sgotplt; -+ asection *srelgot; -+ asection *splt; -+ asection *srelplt; -+ asection *sdynbss; -+ asection *srelbss; -+ -+ /* Small local sym to section mapping cache. */ -+ struct sym_cache sym_sec; -+ -+ /* TLS Local Dynamic GOT Entry */ -+ union { -+ bfd_signed_vma refcount; -+ bfd_vma offset; -+ } tlsld_got; -+}; -+ -+/* Nonzero if this section has TLS related relocations. */ -+#define has_tls_reloc sec_flg0 -+ -+/* Get the ELF linker hash table from a link_info structure. */ -+ -+#define elf64_mb_hash_table(p) \ -+ (elf_hash_table_id ((struct elf_link_hash_table *) ((p)->hash)) \ -+ == MICROBLAZE_ELF_DATA ? ((struct elf64_mb_link_hash_table *) ((p)->hash)) : NULL) -+ -+/* Create an entry in a microblaze ELF linker hash table. */ -+ -+static struct bfd_hash_entry * -+link_hash_newfunc (struct bfd_hash_entry *entry, -+ struct bfd_hash_table *table, -+ const char *string) -+{ -+ /* Allocate the structure if it has not already been allocated by a -+ subclass. */ -+ if (entry == NULL) -+ { -+ entry = bfd_hash_allocate (table, -+ sizeof (struct elf64_mb_link_hash_entry)); -+ if (entry == NULL) -+ return entry; -+ } -+ -+ /* Call the allocation method of the superclass. */ -+ entry = _bfd_elf_link_hash_newfunc (entry, table, string); -+ if (entry != NULL) -+ { -+ struct elf64_mb_link_hash_entry *eh; -+ -+ eh = (struct elf64_mb_link_hash_entry *) entry; -+ eh->dyn_relocs = NULL; -+ eh->tls_mask = 0; -+ } -+ -+ return entry; -+} -+ -+/* Create a mb ELF linker hash table. */ -+ -+static struct bfd_link_hash_table * -+microblaze_elf_link_hash_table_create (bfd *abfd) -+{ -+ struct elf64_mb_link_hash_table *ret; -+ bfd_size_type amt = sizeof (struct elf64_mb_link_hash_table); -+ -+ ret = (struct elf64_mb_link_hash_table *) bfd_zmalloc (amt); -+ if (ret == NULL) -+ return NULL; -+ -+ if (!_bfd_elf_link_hash_table_init (&ret->elf, abfd, link_hash_newfunc, -+ sizeof (struct elf64_mb_link_hash_entry), -+ MICROBLAZE_ELF_DATA)) -+ { -+ free (ret); -+ return NULL; -+ } -+ -+ return &ret->elf.root; -+} -+ -+/* Set the values of the small data pointers. */ -+ -+static void -+microblaze_elf_final_sdp (struct bfd_link_info *info) -+{ -+ struct bfd_link_hash_entry *h; -+ -+ h = bfd_link_hash_lookup (info->hash, RO_SDA_ANCHOR_NAME, FALSE, FALSE, TRUE); -+ if (h != (struct bfd_link_hash_entry *) NULL -+ && h->type == bfd_link_hash_defined) -+ ro_small_data_pointer = (h->u.def.value -+ + h->u.def.section->output_section->vma -+ + h->u.def.section->output_offset); -+ -+ h = bfd_link_hash_lookup (info->hash, RW_SDA_ANCHOR_NAME, FALSE, FALSE, TRUE); -+ if (h != (struct bfd_link_hash_entry *) NULL -+ && h->type == bfd_link_hash_defined) -+ rw_small_data_pointer = (h->u.def.value -+ + h->u.def.section->output_section->vma -+ + h->u.def.section->output_offset); -+} -+ -+static bfd_vma -+dtprel_base (struct bfd_link_info *info) -+{ -+ /* If tls_sec is NULL, we should have signalled an error already. */ -+ if (elf_hash_table (info)->tls_sec == NULL) -+ return 0; -+ return elf_hash_table (info)->tls_sec->vma; -+} -+ -+/* The size of the thread control block. */ -+#define TCB_SIZE 8 -+ -+/* Output a simple dynamic relocation into SRELOC. */ -+ -+static void -+microblaze_elf_output_dynamic_relocation (bfd *output_bfd, -+ asection *sreloc, -+ unsigned long reloc_index, -+ unsigned long indx, -+ int r_type, -+ bfd_vma offset, -+ bfd_vma addend) -+{ -+ -+ Elf_Internal_Rela rel; -+ -+ rel.r_info = ELF64_R_INFO (indx, r_type); -+ rel.r_offset = offset; -+ rel.r_addend = addend; -+ -+ bfd_elf64_swap_reloca_out (output_bfd, &rel, -+ (sreloc->contents + reloc_index * sizeof (Elf64_External_Rela))); -+} -+ -+/* This code is taken from elf64-m32r.c -+ There is some attempt to make this function usable for many architectures, -+ both USE_REL and USE_RELA ['twould be nice if such a critter existed], -+ if only to serve as a learning tool. -+ -+ The RELOCATE_SECTION function is called by the new ELF backend linker -+ to handle the relocations for a section. -+ -+ The relocs are always passed as Rela structures; if the section -+ actually uses Rel structures, the r_addend field will always be -+ zero. -+ -+ This function is responsible for adjust the section contents as -+ necessary, and (if using Rela relocs and generating a -+ relocatable output file) adjusting the reloc addend as -+ necessary. -+ -+ This function does not have to worry about setting the reloc -+ address or the reloc symbol index. -+ -+ LOCAL_SYMS is a pointer to the swapped in local symbols. -+ -+ LOCAL_SECTIONS is an array giving the section in the input file -+ corresponding to the st_shndx field of each local symbol. -+ -+ The global hash table entry for the global symbols can be found -+ via elf_sym_hashes (input_bfd). -+ -+ When generating relocatable output, this function must handle -+ STB_LOCAL/STT_SECTION symbols specially. The output symbol is -+ going to be the section symbol corresponding to the output -+ section, which means that the addend must be adjusted -+ accordingly. */ -+ -+static bfd_boolean -+microblaze_elf_relocate_section (bfd *output_bfd, -+ struct bfd_link_info *info, -+ bfd *input_bfd, -+ asection *input_section, -+ bfd_byte *contents, -+ Elf_Internal_Rela *relocs, -+ Elf_Internal_Sym *local_syms, -+ asection **local_sections) -+{ -+ struct elf64_mb_link_hash_table *htab; -+ Elf_Internal_Shdr *symtab_hdr = &elf_tdata (input_bfd)->symtab_hdr; -+ struct elf_link_hash_entry **sym_hashes = elf_sym_hashes (input_bfd); -+ Elf_Internal_Rela *rel, *relend; -+ int endian = (bfd_little_endian (output_bfd)) ? 0 : 2; -+ /* Assume success. */ -+ bfd_boolean ret = TRUE; -+ asection *sreloc; -+ bfd_vma *local_got_offsets; -+ unsigned int tls_type; -+ -+ if (!microblaze_elf_howto_table[R_MICROBLAZE_max-1]) -+ microblaze_elf_howto_init (); -+ -+ htab = elf64_mb_hash_table (info); -+ if (htab == NULL) -+ return FALSE; -+ -+ local_got_offsets = elf_local_got_offsets (input_bfd); -+ -+ sreloc = elf_section_data (input_section)->sreloc; -+ -+ rel = relocs; -+ relend = relocs + input_section->reloc_count; -+ for (; rel < relend; rel++) -+ { -+ int r_type; -+ reloc_howto_type *howto; -+ unsigned long r_symndx; -+ bfd_vma addend = rel->r_addend; -+ bfd_vma offset = rel->r_offset; -+ struct elf_link_hash_entry *h; -+ Elf_Internal_Sym *sym; -+ asection *sec; -+ const char *sym_name; -+ bfd_reloc_status_type r = bfd_reloc_ok; -+ const char *errmsg = NULL; -+ bfd_boolean unresolved_reloc = FALSE; -+ -+ h = NULL; -+ r_type = ELF64_R_TYPE (rel->r_info); -+ tls_type = 0; -+ -+ if (r_type < 0 || r_type >= (int) R_MICROBLAZE_max) -+ { -+ (*_bfd_error_handler) (_("%s: unknown relocation type %d"), -+ bfd_get_filename (input_bfd), (int) r_type); -+ bfd_set_error (bfd_error_bad_value); -+ ret = FALSE; -+ continue; -+ } -+ -+ howto = microblaze_elf_howto_table[r_type]; -+ r_symndx = ELF64_R_SYM (rel->r_info); -+ -+ if (bfd_link_relocatable (info)) -+ { -+ /* This is a relocatable link. We don't have to change -+ anything, unless the reloc is against a section symbol, -+ in which case we have to adjust according to where the -+ section symbol winds up in the output section. */ -+ sec = NULL; -+ if (r_symndx >= symtab_hdr->sh_info) -+ /* External symbol. */ -+ continue; -+ -+ /* Local symbol. */ -+ sym = local_syms + r_symndx; -+ sym_name = "<local symbol>"; -+ /* STT_SECTION: symbol is associated with a section. */ -+ if (ELF_ST_TYPE (sym->st_info) != STT_SECTION) -+ /* Symbol isn't associated with a section. Nothing to do. */ -+ continue; -+ -+ sec = local_sections[r_symndx]; -+ addend += sec->output_offset + sym->st_value; -+#ifndef USE_REL -+ /* This can't be done for USE_REL because it doesn't mean anything -+ and elf_link_input_bfd asserts this stays zero. */ -+ /* rel->r_addend = addend; */ -+#endif -+ -+#ifndef USE_REL -+ /* Addends are stored with relocs. We're done. */ -+ continue; -+#else /* USE_REL */ -+ /* If partial_inplace, we need to store any additional addend -+ back in the section. */ -+ if (!howto->partial_inplace) -+ continue; -+ /* ??? Here is a nice place to call a special_function like handler. */ -+ r = _bfd_relocate_contents (howto, input_bfd, addend, -+ contents + offset); -+#endif /* USE_REL */ -+ } -+ else -+ { -+ bfd_vma relocation; -+ -+ /* This is a final link. */ -+ sym = NULL; -+ sec = NULL; -+ unresolved_reloc = FALSE; -+ -+ if (r_symndx < symtab_hdr->sh_info) -+ { -+ /* Local symbol. */ -+ sym = local_syms + r_symndx; -+ sec = local_sections[r_symndx]; -+ if (sec == 0) -+ continue; -+ sym_name = "<local symbol>"; -+ relocation = _bfd_elf_rela_local_sym (output_bfd, sym, &sec, rel); -+ /* r_addend may have changed if the reference section was -+ a merge section. */ -+ addend = rel->r_addend; -+ } -+ else -+ { -+ /* External symbol. */ -+ bfd_boolean warned ATTRIBUTE_UNUSED; -+ bfd_boolean ignored ATTRIBUTE_UNUSED; -+ -+ RELOC_FOR_GLOBAL_SYMBOL (info, input_bfd, input_section, rel, -+ r_symndx, symtab_hdr, sym_hashes, -+ h, sec, relocation, -+ unresolved_reloc, warned, ignored); -+ sym_name = h->root.root.string; -+ } -+ -+ /* Sanity check the address. */ -+ if (offset > bfd_get_section_limit (input_bfd, input_section)) -+ { -+ r = bfd_reloc_outofrange; -+ goto check_reloc; -+ } -+ -+ switch ((int) r_type) -+ { -+ case (int) R_MICROBLAZE_SRO32 : -+ { -+ const char *name; -+ -+ /* Only relocate if the symbol is defined. */ -+ if (sec) -+ { -+ name = bfd_get_section_name (sec->owner, sec); -+ -+ if (strcmp (name, ".sdata2") == 0 -+ || strcmp (name, ".sbss2") == 0) -+ { -+ if (ro_small_data_pointer == 0) -+ microblaze_elf_final_sdp (info); -+ if (ro_small_data_pointer == 0) -+ { -+ ret = FALSE; -+ r = bfd_reloc_undefined; -+ goto check_reloc; -+ } -+ -+ /* At this point `relocation' contains the object's -+ address. */ -+ relocation -= ro_small_data_pointer; -+ /* Now it contains the offset from _SDA2_BASE_. */ -+ r = _bfd_final_link_relocate (howto, input_bfd, -+ input_section, -+ contents, offset, -+ relocation, addend); -+ } -+ else -+ { -+ (*_bfd_error_handler) (_("%s: The target (%s) of an %s relocation is in the wrong section (%s)"), -+ bfd_get_filename (input_bfd), -+ sym_name, -+ microblaze_elf_howto_table[(int) r_type]->name, -+ bfd_get_section_name (sec->owner, sec)); -+ /*bfd_set_error (bfd_error_bad_value); ??? why? */ -+ ret = FALSE; -+ continue; -+ } -+ } -+ } -+ break; -+ -+ case (int) R_MICROBLAZE_SRW32 : -+ { -+ const char *name; -+ -+ /* Only relocate if the symbol is defined. */ -+ if (sec) -+ { -+ name = bfd_get_section_name (sec->owner, sec); -+ -+ if (strcmp (name, ".sdata") == 0 -+ || strcmp (name, ".sbss") == 0) -+ { -+ if (rw_small_data_pointer == 0) -+ microblaze_elf_final_sdp (info); -+ if (rw_small_data_pointer == 0) -+ { -+ ret = FALSE; -+ r = bfd_reloc_undefined; -+ goto check_reloc; -+ } -+ -+ /* At this point `relocation' contains the object's -+ address. */ -+ relocation -= rw_small_data_pointer; -+ /* Now it contains the offset from _SDA_BASE_. */ -+ r = _bfd_final_link_relocate (howto, input_bfd, -+ input_section, -+ contents, offset, -+ relocation, addend); -+ } -+ else -+ { -+ (*_bfd_error_handler) (_("%s: The target (%s) of an %s relocation is in the wrong section (%s)"), -+ bfd_get_filename (input_bfd), -+ sym_name, -+ microblaze_elf_howto_table[(int) r_type]->name, -+ bfd_get_section_name (sec->owner, sec)); -+ /*bfd_set_error (bfd_error_bad_value); ??? why? */ -+ ret = FALSE; -+ continue; -+ } -+ } -+ } -+ break; -+ -+ case (int) R_MICROBLAZE_32_SYM_OP_SYM: -+ break; /* Do nothing. */ -+ -+ case (int) R_MICROBLAZE_GOTPC_64: -+ relocation = htab->sgotplt->output_section->vma -+ + htab->sgotplt->output_offset; -+ relocation -= (input_section->output_section->vma -+ + input_section->output_offset -+ + offset + INST_WORD_SIZE); -+ relocation += addend; -+ bfd_put_16 (input_bfd, (relocation >> 16) & 0xffff, -+ contents + offset + endian); -+ bfd_put_16 (input_bfd, relocation & 0xffff, -+ contents + offset + endian + INST_WORD_SIZE); -+ break; -+ -+ case (int) R_MICROBLAZE_PLT_64: -+ { -+ bfd_vma immediate; -+ if (htab->splt != NULL && h != NULL -+ && h->plt.offset != (bfd_vma) -1) -+ { -+ relocation = (htab->splt->output_section->vma -+ + htab->splt->output_offset -+ + h->plt.offset); -+ unresolved_reloc = FALSE; -+ immediate = relocation - (input_section->output_section->vma -+ + input_section->output_offset -+ + offset + INST_WORD_SIZE); -+ bfd_put_16 (input_bfd, (immediate >> 16) & 0xffff, -+ contents + offset + endian); -+ bfd_put_16 (input_bfd, immediate & 0xffff, -+ contents + offset + endian + INST_WORD_SIZE); -+ } -+ else -+ { -+ relocation -= (input_section->output_section->vma -+ + input_section->output_offset -+ + offset + INST_WORD_SIZE); -+ immediate = relocation; -+ bfd_put_16 (input_bfd, (immediate >> 16) & 0xffff, -+ contents + offset + endian); -+ bfd_put_16 (input_bfd, immediate & 0xffff, -+ contents + offset + endian + INST_WORD_SIZE); -+ } -+ break; -+ } -+ -+ case (int) R_MICROBLAZE_TLSGD: -+ tls_type = (TLS_TLS | TLS_GD); -+ goto dogot; -+ case (int) R_MICROBLAZE_TLSLD: -+ tls_type = (TLS_TLS | TLS_LD); -+ dogot: -+ case (int) R_MICROBLAZE_GOT_64: -+ { -+ bfd_vma *offp; -+ bfd_vma off, off2; -+ unsigned long indx; -+ bfd_vma static_value; -+ -+ bfd_boolean need_relocs = FALSE; -+ if (htab->sgot == NULL) -+ abort (); -+ -+ indx = 0; -+ offp = NULL; -+ -+ /* 1. Identify GOT Offset; -+ 2. Compute Static Values -+ 3. Process Module Id, Process Offset -+ 4. Fixup Relocation with GOT offset value. */ -+ -+ /* 1. Determine GOT Offset to use : TLS_LD, global, local */ -+ if (IS_TLS_LD (tls_type)) -+ offp = &htab->tlsld_got.offset; -+ else if (h != NULL) -+ { -+ if (htab->sgotplt != NULL && h->got.offset != (bfd_vma) -1) -+ offp = &h->got.offset; -+ else -+ abort (); -+ } -+ else -+ { -+ if (local_got_offsets == NULL) -+ abort (); -+ offp = &local_got_offsets[r_symndx]; -+ } -+ -+ if (!offp) -+ abort (); -+ -+ off = (*offp) & ~1; -+ off2 = off; -+ -+ if (IS_TLS_LD(tls_type) || IS_TLS_GD(tls_type)) -+ off2 = off + 4; -+ -+ /* Symbol index to use for relocs */ -+ if (h != NULL) -+ { -+ bfd_boolean dyn = -+ elf_hash_table (info)->dynamic_sections_created; -+ -+ if (WILL_CALL_FINISH_DYNAMIC_SYMBOL (dyn, -+ bfd_link_pic (info), -+ h) -+ && (!bfd_link_pic (info) -+ || !SYMBOL_REFERENCES_LOCAL (info, h))) -+ indx = h->dynindx; -+ } -+ -+ /* Need to generate relocs ? */ -+ if ((bfd_link_pic (info) || indx != 0) -+ && (h == NULL -+ || ELF_ST_VISIBILITY (h->other) == STV_DEFAULT -+ || h->root.type != bfd_link_hash_undefweak)) -+ need_relocs = TRUE; -+ -+ /* 2. Compute/Emit Static value of r-expression */ -+ static_value = relocation + addend; -+ -+ /* 3. Process module-id and offset */ -+ if (! ((*offp) & 1) ) -+ { -+ bfd_vma got_offset; -+ -+ got_offset = (htab->sgot->output_section->vma -+ + htab->sgot->output_offset -+ + off); -+ -+ /* Process module-id */ -+ if (IS_TLS_LD(tls_type)) -+ { -+ if (! bfd_link_pic (info)) -+ { -+ bfd_put_32 (output_bfd, 1, htab->sgot->contents + off); -+ } -+ else -+ { -+ microblaze_elf_output_dynamic_relocation (output_bfd, -+ htab->srelgot, htab->srelgot->reloc_count++, -+ /* symindex= */ 0, R_MICROBLAZE_TLSDTPMOD32, -+ got_offset, 0); -+ } -+ } -+ else if (IS_TLS_GD(tls_type)) -+ { -+ if (! need_relocs) -+ { -+ bfd_put_32 (output_bfd, 1, htab->sgot->contents + off); -+ } -+ else -+ { -+ microblaze_elf_output_dynamic_relocation (output_bfd, -+ htab->srelgot, -+ htab->srelgot->reloc_count++, -+ /* symindex= */ indx, R_MICROBLAZE_TLSDTPMOD32, -+ got_offset, indx ? 0 : static_value); -+ } -+ } -+ -+ /* Process Offset */ -+ if (htab->srelgot == NULL) -+ abort (); -+ -+ got_offset = (htab->sgot->output_section->vma -+ + htab->sgot->output_offset -+ + off2); -+ if (IS_TLS_LD(tls_type)) -+ { -+ /* For LD, offset should be 0 */ -+ *offp |= 1; -+ bfd_put_32 (output_bfd, 0, htab->sgot->contents + off2); -+ } -+ else if (IS_TLS_GD(tls_type)) -+ { -+ *offp |= 1; -+ static_value -= dtprel_base(info); -+ if (need_relocs) -+ { -+ microblaze_elf_output_dynamic_relocation (output_bfd, -+ htab->srelgot, htab->srelgot->reloc_count++, -+ /* symindex= */ indx, R_MICROBLAZE_TLSDTPREL32, -+ got_offset, indx ? 0 : static_value); -+ } -+ else -+ { -+ bfd_put_32 (output_bfd, static_value, -+ htab->sgot->contents + off2); -+ } -+ } -+ else -+ { -+ bfd_put_32 (output_bfd, static_value, -+ htab->sgot->contents + off2); -+ -+ /* Relocs for dyn symbols generated by -+ finish_dynamic_symbols */ -+ if (bfd_link_pic (info) && h == NULL) -+ { -+ *offp |= 1; -+ microblaze_elf_output_dynamic_relocation (output_bfd, -+ htab->srelgot, htab->srelgot->reloc_count++, -+ /* symindex= */ indx, R_MICROBLAZE_REL, -+ got_offset, static_value); -+ } -+ } -+ } -+ -+ /* 4. Fixup Relocation with GOT offset value -+ Compute relative address of GOT entry for applying -+ the current relocation */ -+ relocation = htab->sgot->output_section->vma -+ + htab->sgot->output_offset -+ + off -+ - htab->sgotplt->output_section->vma -+ - htab->sgotplt->output_offset; -+ -+ /* Apply Current Relocation */ -+ bfd_put_16 (input_bfd, (relocation >> 16) & 0xffff, -+ contents + offset + endian); -+ bfd_put_16 (input_bfd, relocation & 0xffff, -+ contents + offset + endian + INST_WORD_SIZE); -+ -+ unresolved_reloc = FALSE; -+ break; -+ } -+ -+ case (int) R_MICROBLAZE_GOTOFF_64: -+ { -+ bfd_vma immediate; -+ unsigned short lo, high; -+ relocation += addend; -+ relocation -= htab->sgotplt->output_section->vma -+ + htab->sgotplt->output_offset; -+ /* Write this value into correct location. */ -+ immediate = relocation; -+ lo = immediate & 0x0000ffff; -+ high = (immediate >> 16) & 0x0000ffff; -+ bfd_put_16 (input_bfd, high, contents + offset + endian); -+ bfd_put_16 (input_bfd, lo, contents + offset + INST_WORD_SIZE + endian); -+ break; -+ } -+ -+ case (int) R_MICROBLAZE_GOTOFF_32: -+ { -+ relocation += addend; -+ relocation -= htab->sgotplt->output_section->vma -+ + htab->sgotplt->output_offset; -+ /* Write this value into correct location. */ -+ bfd_put_32 (input_bfd, relocation, contents + offset); -+ break; -+ } -+ -+ case (int) R_MICROBLAZE_TLSDTPREL64: -+ relocation += addend; -+ relocation -= dtprel_base(info); -+ bfd_put_16 (input_bfd, (relocation >> 16) & 0xffff, -+ contents + offset + endian); -+ bfd_put_16 (input_bfd, relocation & 0xffff, -+ contents + offset + endian + INST_WORD_SIZE); -+ break; -+ case (int) R_MICROBLAZE_64_PCREL : -+ case (int) R_MICROBLAZE_64: -+ case (int) R_MICROBLAZE_32: -+ { -+ /* r_symndx will be STN_UNDEF (zero) only for relocs against symbols -+ from removed linkonce sections, or sections discarded by -+ a linker script. */ -+ if (r_symndx == STN_UNDEF || (input_section->flags & SEC_ALLOC) == 0) -+ { -+ relocation += addend; -+ if (r_type == R_MICROBLAZE_32) -+ bfd_put_32 (input_bfd, relocation, contents + offset); -+ else -+ { -+ if (r_type == R_MICROBLAZE_64_PCREL) -+ relocation -= (input_section->output_section->vma -+ + input_section->output_offset -+ + offset + INST_WORD_SIZE); -+ bfd_put_16 (input_bfd, (relocation >> 16) & 0xffff, -+ contents + offset + endian); -+ bfd_put_16 (input_bfd, relocation & 0xffff, -+ contents + offset + endian + INST_WORD_SIZE); -+ } -+ break; -+ } -+ -+ if ((bfd_link_pic (info) -+ && (h == NULL -+ || ELF_ST_VISIBILITY (h->other) == STV_DEFAULT -+ || h->root.type != bfd_link_hash_undefweak) -+ && (!howto->pc_relative -+ || (h != NULL -+ && h->dynindx != -1 -+ && (!info->symbolic -+ || !h->def_regular)))) -+ || (!bfd_link_pic (info) -+ && h != NULL -+ && h->dynindx != -1 -+ && !h->non_got_ref -+ && ((h->def_dynamic -+ && !h->def_regular) -+ || h->root.type == bfd_link_hash_undefweak -+ || h->root.type == bfd_link_hash_undefined))) -+ { -+ Elf_Internal_Rela outrel; -+ bfd_byte *loc; -+ bfd_boolean skip; -+ -+ /* When generating a shared object, these relocations -+ are copied into the output file to be resolved at run -+ time. */ -+ -+ BFD_ASSERT (sreloc != NULL); -+ -+ skip = FALSE; -+ -+ outrel.r_offset = -+ _bfd_elf_section_offset (output_bfd, info, input_section, -+ rel->r_offset); -+ if (outrel.r_offset == (bfd_vma) -1) -+ skip = TRUE; -+ else if (outrel.r_offset == (bfd_vma) -2) -+ skip = TRUE; -+ outrel.r_offset += (input_section->output_section->vma -+ + input_section->output_offset); -+ -+ if (skip) -+ memset (&outrel, 0, sizeof outrel); -+ /* h->dynindx may be -1 if the symbol was marked to -+ become local. */ -+ else if (h != NULL -+ && ((! info->symbolic && h->dynindx != -1) -+ || !h->def_regular)) -+ { -+ BFD_ASSERT (h->dynindx != -1); -+ outrel.r_info = ELF64_R_INFO (h->dynindx, r_type); -+ outrel.r_addend = addend; -+ } -+ else -+ { -+ if (r_type == R_MICROBLAZE_32) -+ { -+ outrel.r_info = ELF64_R_INFO (0, R_MICROBLAZE_REL); -+ outrel.r_addend = relocation + addend; -+ } -+ else -+ { -+ BFD_FAIL (); -+ (*_bfd_error_handler) -+ (_("%B: probably compiled without -fPIC?"), -+ input_bfd); -+ bfd_set_error (bfd_error_bad_value); -+ return FALSE; -+ } -+ } -+ -+ loc = sreloc->contents; -+ loc += sreloc->reloc_count++ * sizeof (Elf64_External_Rela); -+ bfd_elf64_swap_reloca_out (output_bfd, &outrel, loc); -+ break; -+ } -+ else -+ { -+ relocation += addend; -+ if (r_type == R_MICROBLAZE_32) -+ bfd_put_32 (input_bfd, relocation, contents + offset); -+ else -+ { -+ if (r_type == R_MICROBLAZE_64_PCREL) -+ relocation -= (input_section->output_section->vma -+ + input_section->output_offset -+ + offset + INST_WORD_SIZE); -+ bfd_put_16 (input_bfd, (relocation >> 16) & 0xffff, -+ contents + offset + endian); -+ bfd_put_16 (input_bfd, relocation & 0xffff, -+ contents + offset + endian + INST_WORD_SIZE); -+ } -+ break; -+ } -+ } -+ -+ default : -+ r = _bfd_final_link_relocate (howto, input_bfd, input_section, -+ contents, offset, -+ relocation, addend); -+ break; -+ } -+ } -+ -+ check_reloc: -+ -+ if (r != bfd_reloc_ok) -+ { -+ /* FIXME: This should be generic enough to go in a utility. */ -+ const char *name; -+ -+ if (h != NULL) -+ name = h->root.root.string; -+ else -+ { -+ name = (bfd_elf_string_from_elf_section -+ (input_bfd, symtab_hdr->sh_link, sym->st_name)); -+ if (name == NULL || *name == '\0') -+ name = bfd_section_name (input_bfd, sec); -+ } -+ -+ if (errmsg != NULL) -+ goto common_error; -+ -+ switch (r) -+ { -+ case bfd_reloc_overflow: -+ (*info->callbacks->reloc_overflow) -+ (info, (h ? &h->root : NULL), name, howto->name, -+ (bfd_vma) 0, input_bfd, input_section, offset); -+ break; -+ -+ case bfd_reloc_undefined: -+ (*info->callbacks->undefined_symbol) -+ (info, name, input_bfd, input_section, offset, TRUE); -+ break; -+ -+ case bfd_reloc_outofrange: -+ errmsg = _("internal error: out of range error"); -+ goto common_error; -+ -+ case bfd_reloc_notsupported: -+ errmsg = _("internal error: unsupported relocation error"); -+ goto common_error; -+ -+ case bfd_reloc_dangerous: -+ errmsg = _("internal error: dangerous error"); -+ goto common_error; -+ -+ default: -+ errmsg = _("internal error: unknown error"); -+ /* Fall through. */ -+ common_error: -+ (*info->callbacks->warning) (info, errmsg, name, input_bfd, -+ input_section, offset); -+ break; -+ } -+ } -+ } -+ -+ return ret; -+} -+ -+/* Merge backend specific data from an object file to the output -+ object file when linking. -+ -+ Note: We only use this hook to catch endian mismatches. */ -+static bfd_boolean -+microblaze_elf_merge_private_bfd_data (bfd * ibfd, bfd * obfd) -+{ -+ /* Check if we have the same endianess. */ -+ if (! _bfd_generic_verify_endian_match (ibfd, obfd)) -+ return FALSE; -+ -+ return TRUE; -+} -+ -+ -+/* Calculate fixup value for reference. */ -+ -+static int -+calc_fixup (bfd_vma start, bfd_vma size, asection *sec) -+{ -+ bfd_vma end = start + size; -+ int i, fixup = 0; -+ -+ if (sec == NULL || sec->relax == NULL) -+ return 0; -+ -+ /* Look for addr in relax table, total fixup value. */ -+ for (i = 0; i < sec->relax_count; i++) -+ { -+ if (end <= sec->relax[i].addr) -+ break; -+ if ((end != start) && (start > sec->relax[i].addr)) -+ continue; -+ fixup += sec->relax[i].size; -+ } -+ return fixup; -+} -+ -+/* Read-modify-write into the bfd, an immediate value into appropriate fields of -+ a 32-bit instruction. */ -+static void -+microblaze_bfd_write_imm_value_32 (bfd *abfd, bfd_byte *bfd_addr, bfd_vma val) -+{ -+ unsigned long instr = bfd_get_32 (abfd, bfd_addr); -+ instr &= ~0x0000ffff; -+ instr |= (val & 0x0000ffff); -+ bfd_put_32 (abfd, instr, bfd_addr); -+} -+ -+/* Read-modify-write into the bfd, an immediate value into appropriate fields of -+ two consecutive 32-bit instructions. */ -+static void -+microblaze_bfd_write_imm_value_64 (bfd *abfd, bfd_byte *bfd_addr, bfd_vma val) -+{ -+ unsigned long instr_hi; -+ unsigned long instr_lo; -+ -+ instr_hi = bfd_get_32 (abfd, bfd_addr); -+ instr_hi &= ~0x0000ffff; -+ instr_hi |= ((val >> 16) & 0x0000ffff); -+ bfd_put_32 (abfd, instr_hi, bfd_addr); -+ -+ instr_lo = bfd_get_32 (abfd, bfd_addr + INST_WORD_SIZE); -+ instr_lo &= ~0x0000ffff; -+ instr_lo |= (val & 0x0000ffff); -+ bfd_put_32 (abfd, instr_lo, bfd_addr + INST_WORD_SIZE); -+} -+ -+static bfd_boolean -+microblaze_elf_relax_section (bfd *abfd, -+ asection *sec, -+ struct bfd_link_info *link_info, -+ bfd_boolean *again) -+{ -+ Elf_Internal_Shdr *symtab_hdr; -+ Elf_Internal_Rela *internal_relocs; -+ Elf_Internal_Rela *free_relocs = NULL; -+ Elf_Internal_Rela *irel, *irelend; -+ bfd_byte *contents = NULL; -+ bfd_byte *free_contents = NULL; -+ int rel_count; -+ unsigned int shndx; -+ int i, sym_index; -+ asection *o; -+ struct elf_link_hash_entry *sym_hash; -+ Elf_Internal_Sym *isymbuf, *isymend; -+ Elf_Internal_Sym *isym; -+ int symcount; -+ int offset; -+ bfd_vma src, dest; -+ -+ /* We only do this once per section. We may be able to delete some code -+ by running multiple passes, but it is not worth it. */ -+ *again = FALSE; -+ -+ /* Only do this for a text section. */ -+ if (bfd_link_relocatable (link_info) -+ || (sec->flags & SEC_RELOC) == 0 -+ || (sec->reloc_count == 0) -+ || (sec->flags & SEC_CODE) == 0) -+ return TRUE; -+ -+ BFD_ASSERT ((sec->size > 0) || (sec->rawsize > 0)); -+ -+ /* If this is the first time we have been called for this section, -+ initialize the cooked size. */ -+ if (sec->size == 0) -+ sec->size = sec->rawsize; -+ -+ /* Get symbols for this section. */ -+ symtab_hdr = &elf_tdata (abfd)->symtab_hdr; -+ isymbuf = (Elf_Internal_Sym *) symtab_hdr->contents; -+ symcount = symtab_hdr->sh_size / sizeof (Elf64_External_Sym); -+ if (isymbuf == NULL) -+ isymbuf = bfd_elf_get_elf_syms (abfd, symtab_hdr, symcount, -+ 0, NULL, NULL, NULL); -+ BFD_ASSERT (isymbuf != NULL); -+ -+ internal_relocs = _bfd_elf_link_read_relocs (abfd, sec, NULL, NULL, link_info->keep_memory); -+ if (internal_relocs == NULL) -+ goto error_return; -+ if (! link_info->keep_memory) -+ free_relocs = internal_relocs; -+ -+ sec->relax = (struct relax_table *) bfd_malloc ((sec->reloc_count + 1) -+ * sizeof (struct relax_table)); -+ if (sec->relax == NULL) -+ goto error_return; -+ sec->relax_count = 0; -+ -+ irelend = internal_relocs + sec->reloc_count; -+ rel_count = 0; -+ for (irel = internal_relocs; irel < irelend; irel++, rel_count++) -+ { -+ bfd_vma symval; -+ if ((ELF64_R_TYPE (irel->r_info) != (int) R_MICROBLAZE_64_PCREL) -+ && (ELF64_R_TYPE (irel->r_info) != (int) R_MICROBLAZE_64 )) -+ continue; /* Can't delete this reloc. */ -+ -+ /* Get the section contents. */ -+ if (contents == NULL) -+ { -+ if (elf_section_data (sec)->this_hdr.contents != NULL) -+ contents = elf_section_data (sec)->this_hdr.contents; -+ else -+ { -+ contents = (bfd_byte *) bfd_malloc (sec->size); -+ if (contents == NULL) -+ goto error_return; -+ free_contents = contents; -+ -+ if (!bfd_get_section_contents (abfd, sec, contents, -+ (file_ptr) 0, sec->size)) -+ goto error_return; -+ elf_section_data (sec)->this_hdr.contents = contents; -+ } -+ } -+ -+ /* Get the value of the symbol referred to by the reloc. */ -+ if (ELF64_R_SYM (irel->r_info) < symtab_hdr->sh_info) -+ { -+ /* A local symbol. */ -+ asection *sym_sec; -+ -+ isym = isymbuf + ELF64_R_SYM (irel->r_info); -+ if (isym->st_shndx == SHN_UNDEF) -+ sym_sec = bfd_und_section_ptr; -+ else if (isym->st_shndx == SHN_ABS) -+ sym_sec = bfd_abs_section_ptr; -+ else if (isym->st_shndx == SHN_COMMON) -+ sym_sec = bfd_com_section_ptr; -+ else -+ sym_sec = bfd_section_from_elf_index (abfd, isym->st_shndx); -+ -+ symval = _bfd_elf_rela_local_sym (abfd, isym, &sym_sec, irel); -+ } -+ else -+ { -+ unsigned long indx; -+ struct elf_link_hash_entry *h; -+ -+ indx = ELF64_R_SYM (irel->r_info) - symtab_hdr->sh_info; -+ h = elf_sym_hashes (abfd)[indx]; -+ BFD_ASSERT (h != NULL); -+ -+ if (h->root.type != bfd_link_hash_defined -+ && h->root.type != bfd_link_hash_defweak) -+ /* This appears to be a reference to an undefined -+ symbol. Just ignore it--it will be caught by the -+ regular reloc processing. */ -+ continue; -+ -+ symval = (h->root.u.def.value -+ + h->root.u.def.section->output_section->vma -+ + h->root.u.def.section->output_offset); -+ } -+ -+ /* If this is a PC-relative reloc, subtract the instr offset from -+ the symbol value. */ -+ if (ELF64_R_TYPE (irel->r_info) == (int) R_MICROBLAZE_64_PCREL) -+ { -+ symval = symval + irel->r_addend -+ - (irel->r_offset -+ + sec->output_section->vma -+ + sec->output_offset); -+ } -+ else -+ symval += irel->r_addend; -+ -+ if ((symval & 0xffff8000) == 0) -+ { -+ /* We can delete this instruction. */ -+ sec->relax[sec->relax_count].addr = irel->r_offset; -+ sec->relax[sec->relax_count].size = INST_WORD_SIZE; -+ sec->relax_count++; -+ -+ /* Rewrite relocation type. */ -+ switch ((enum elf_microblaze_reloc_type) ELF64_R_TYPE (irel->r_info)) -+ { -+ case R_MICROBLAZE_64_PCREL: -+ irel->r_info = ELF64_R_INFO (ELF64_R_SYM (irel->r_info), -+ (int) R_MICROBLAZE_32_PCREL_LO); -+ break; -+ case R_MICROBLAZE_64: -+ irel->r_info = ELF64_R_INFO (ELF64_R_SYM (irel->r_info), -+ (int) R_MICROBLAZE_32_LO); -+ break; -+ default: -+ /* Cannot happen. */ -+ BFD_ASSERT (FALSE); -+ } -+ } -+ } /* Loop through all relocations. */ -+ -+ /* Loop through the relocs again, and see if anything needs to change. */ -+ if (sec->relax_count > 0) -+ { -+ shndx = _bfd_elf_section_from_bfd_section (abfd, sec); -+ rel_count = 0; -+ sec->relax[sec->relax_count].addr = sec->size; -+ -+ for (irel = internal_relocs; irel < irelend; irel++, rel_count++) -+ { -+ bfd_vma nraddr; -+ -+ /* Get the new reloc address. */ -+ nraddr = irel->r_offset - calc_fixup (irel->r_offset, 0, sec); -+ switch ((enum elf_microblaze_reloc_type) ELF64_R_TYPE (irel->r_info)) -+ { -+ default: -+ break; -+ case R_MICROBLAZE_64_PCREL: -+ break; -+ case R_MICROBLAZE_64: -+ case R_MICROBLAZE_32_LO: -+ /* If this reloc is against a symbol defined in this -+ section, we must check the addend to see it will put the value in -+ range to be adjusted, and hence must be changed. */ -+ if (ELF64_R_SYM (irel->r_info) < symtab_hdr->sh_info) -+ { -+ isym = isymbuf + ELF64_R_SYM (irel->r_info); -+ /* Only handle relocs against .text. */ -+ if (isym->st_shndx == shndx -+ && ELF64_ST_TYPE (isym->st_info) == STT_SECTION) -+ irel->r_addend -= calc_fixup (irel->r_addend, 0, sec); -+ } -+ break; -+ case R_MICROBLAZE_NONE: -+ case R_MICROBLAZE_32_NONE: -+ { -+ /* This was a PC-relative instruction that was -+ completely resolved. */ -+ int sfix, efix; -+ unsigned int val; -+ bfd_vma target_address; -+ target_address = irel->r_addend + irel->r_offset; -+ sfix = calc_fixup (irel->r_offset, 0, sec); -+ efix = calc_fixup (target_address, 0, sec); -+ -+ /* Validate the in-band val. */ -+ val = bfd_get_32 (abfd, contents + irel->r_offset); -+ if (val != irel->r_addend && ELF64_R_TYPE (irel->r_info) == R_MICROBLAZE_32_NONE) { -+ fprintf(stderr, "%d: CORRUPT relax reloc %x %lx\n", __LINE__, val, irel->r_addend); -+ } -+ irel->r_addend -= (efix - sfix); -+ /* Should use HOWTO. */ -+ microblaze_bfd_write_imm_value_32 (abfd, contents + irel->r_offset, -+ irel->r_addend); -+ } -+ break; -+ case R_MICROBLAZE_64_NONE: -+ { -+ /* This was a PC-relative 64-bit instruction that was -+ completely resolved. */ -+ int sfix, efix; -+ bfd_vma target_address; -+ target_address = irel->r_addend + irel->r_offset + INST_WORD_SIZE; -+ sfix = calc_fixup (irel->r_offset + INST_WORD_SIZE, 0, sec); -+ efix = calc_fixup (target_address, 0, sec); -+ irel->r_addend -= (efix - sfix); -+ microblaze_bfd_write_imm_value_32 (abfd, contents + irel->r_offset -+ + INST_WORD_SIZE, irel->r_addend); -+ } -+ break; -+ } -+ irel->r_offset = nraddr; -+ } /* Change all relocs in this section. */ -+ -+ /* Look through all other sections. */ -+ for (o = abfd->sections; o != NULL; o = o->next) -+ { -+ Elf_Internal_Rela *irelocs; -+ Elf_Internal_Rela *irelscan, *irelscanend; -+ bfd_byte *ocontents; -+ -+ if (o == sec -+ || (o->flags & SEC_RELOC) == 0 -+ || o->reloc_count == 0) -+ continue; -+ -+ /* We always cache the relocs. Perhaps, if info->keep_memory is -+ FALSE, we should free them, if we are permitted to. */ -+ -+ irelocs = _bfd_elf_link_read_relocs (abfd, o, NULL, NULL, TRUE); -+ if (irelocs == NULL) -+ goto error_return; -+ -+ ocontents = NULL; -+ irelscanend = irelocs + o->reloc_count; -+ for (irelscan = irelocs; irelscan < irelscanend; irelscan++) -+ { -+ if (1 && ELF64_R_TYPE (irelscan->r_info) == (int) R_MICROBLAZE_32_NONE) -+ { -+ unsigned int val; -+ -+ isym = isymbuf + ELF64_R_SYM (irelscan->r_info); -+ -+ /* hax: We only do the following fixup for debug location lists. */ -+ if (strcmp(".debug_loc", o->name)) -+ continue; -+ -+ /* This was a PC-relative instruction that was completely resolved. */ -+ if (ocontents == NULL) -+ { -+ if (elf_section_data (o)->this_hdr.contents != NULL) -+ ocontents = elf_section_data (o)->this_hdr.contents; -+ else -+ { -+ /* We always cache the section contents. -+ Perhaps, if info->keep_memory is FALSE, we -+ should free them, if we are permitted to. */ -+ -+ if (o->rawsize == 0) -+ o->rawsize = o->size; -+ ocontents = (bfd_byte *) bfd_malloc (o->rawsize); -+ if (ocontents == NULL) -+ goto error_return; -+ if (!bfd_get_section_contents (abfd, o, ocontents, -+ (file_ptr) 0, -+ o->rawsize)) -+ goto error_return; -+ elf_section_data (o)->this_hdr.contents = ocontents; -+ } -+ } -+ -+ val = bfd_get_32 (abfd, ocontents + irelscan->r_offset); -+ if (val != irelscan->r_addend) { -+ fprintf(stderr, "%d: CORRUPT relax reloc! %x %lx\n", __LINE__, val, irelscan->r_addend); -+ } -+ irelscan->r_addend -= calc_fixup (irelscan->r_addend, 0, sec); -+ microblaze_bfd_write_imm_value_32 (abfd, ocontents + irelscan->r_offset, -+ irelscan->r_addend); -+ } -+ if (ELF64_R_TYPE (irelscan->r_info) == (int) R_MICROBLAZE_32) -+ { -+ isym = isymbuf + ELF64_R_SYM (irelscan->r_info); -+ -+ /* Look at the reloc only if the value has been resolved. */ -+ if (isym->st_shndx == shndx -+ && (ELF64_ST_TYPE (isym->st_info) == STT_SECTION)) -+ { -+ if (ocontents == NULL) -+ { -+ if (elf_section_data (o)->this_hdr.contents != NULL) -+ ocontents = elf_section_data (o)->this_hdr.contents; -+ else -+ { -+ /* We always cache the section contents. -+ Perhaps, if info->keep_memory is FALSE, we -+ should free them, if we are permitted to. */ -+ if (o->rawsize == 0) -+ o->rawsize = o->size; -+ ocontents = (bfd_byte *) bfd_malloc (o->rawsize); -+ if (ocontents == NULL) -+ goto error_return; -+ if (!bfd_get_section_contents (abfd, o, ocontents, -+ (file_ptr) 0, -+ o->rawsize)) -+ goto error_return; -+ elf_section_data (o)->this_hdr.contents = ocontents; -+ } -+ -+ } -+ irelscan->r_addend -= calc_fixup (irelscan->r_addend, 0, sec); -+ } -+ else if (ELF64_R_TYPE (irelscan->r_info) == (int) R_MICROBLAZE_32_SYM_OP_SYM) -+ { -+ isym = isymbuf + ELF64_R_SYM (irelscan->r_info); -+ -+ /* Look at the reloc only if the value has been resolved. */ -+ if (ocontents == NULL) -+ { -+ if (elf_section_data (o)->this_hdr.contents != NULL) -+ ocontents = elf_section_data (o)->this_hdr.contents; -+ else -+ { -+ /* We always cache the section contents. -+ Perhaps, if info->keep_memory is FALSE, we -+ should free them, if we are permitted to. */ -+ -+ if (o->rawsize == 0) -+ o->rawsize = o->size; -+ ocontents = (bfd_byte *) bfd_malloc (o->rawsize); -+ if (ocontents == NULL) -+ goto error_return; -+ if (!bfd_get_section_contents (abfd, o, ocontents, -+ (file_ptr) 0, -+ o->rawsize)) -+ goto error_return; -+ elf_section_data (o)->this_hdr.contents = ocontents; -+ } -+ } -+ irelscan->r_addend -= calc_fixup (irelscan->r_addend -+ + isym->st_value, -+ 0, -+ sec); -+ } -+ } -+ else if ((ELF64_R_TYPE (irelscan->r_info) == (int) R_MICROBLAZE_32_PCREL_LO) -+ || (ELF64_R_TYPE (irelscan->r_info) == (int) R_MICROBLAZE_32_LO)) -+ { -+ isym = isymbuf + ELF64_R_SYM (irelscan->r_info); -+ -+ /* Look at the reloc only if the value has been resolved. */ -+ if (isym->st_shndx == shndx -+ && (ELF64_ST_TYPE (isym->st_info) == STT_SECTION)) -+ { -+ bfd_vma immediate; -+ bfd_vma target_address; -+ -+ if (ocontents == NULL) -+ { -+ if (elf_section_data (o)->this_hdr.contents != NULL) -+ ocontents = elf_section_data (o)->this_hdr.contents; -+ else -+ { -+ /* We always cache the section contents. -+ Perhaps, if info->keep_memory is FALSE, we -+ should free them, if we are permitted to. */ -+ if (o->rawsize == 0) -+ o->rawsize = o->size; -+ ocontents = (bfd_byte *) bfd_malloc (o->rawsize); -+ if (ocontents == NULL) -+ goto error_return; -+ if (!bfd_get_section_contents (abfd, o, ocontents, -+ (file_ptr) 0, -+ o->rawsize)) -+ goto error_return; -+ elf_section_data (o)->this_hdr.contents = ocontents; -+ } -+ } -+ -+ unsigned long instr = bfd_get_32 (abfd, ocontents + irelscan->r_offset); -+ immediate = instr & 0x0000ffff; -+ target_address = immediate; -+ offset = calc_fixup (target_address, 0, sec); -+ immediate -= offset; -+ irelscan->r_addend -= offset; -+ microblaze_bfd_write_imm_value_32 (abfd, ocontents + irelscan->r_offset, -+ irelscan->r_addend); -+ } -+ } -+ -+ if (ELF64_R_TYPE (irelscan->r_info) == (int) R_MICROBLAZE_64) -+ { -+ isym = isymbuf + ELF64_R_SYM (irelscan->r_info); -+ -+ /* Look at the reloc only if the value has been resolved. */ -+ if (isym->st_shndx == shndx -+ && (ELF64_ST_TYPE (isym->st_info) == STT_SECTION)) -+ { -+ bfd_vma immediate; -+ -+ if (ocontents == NULL) -+ { -+ if (elf_section_data (o)->this_hdr.contents != NULL) -+ ocontents = elf_section_data (o)->this_hdr.contents; -+ else -+ { -+ /* We always cache the section contents. -+ Perhaps, if info->keep_memory is FALSE, we -+ should free them, if we are permitted to. */ -+ -+ if (o->rawsize == 0) -+ o->rawsize = o->size; -+ ocontents = (bfd_byte *) bfd_malloc (o->rawsize); -+ if (ocontents == NULL) -+ goto error_return; -+ if (!bfd_get_section_contents (abfd, o, ocontents, -+ (file_ptr) 0, -+ o->rawsize)) -+ goto error_return; -+ elf_section_data (o)->this_hdr.contents = ocontents; -+ } -+ } -+ unsigned long instr_hi = bfd_get_32 (abfd, ocontents -+ + irelscan->r_offset); -+ unsigned long instr_lo = bfd_get_32 (abfd, ocontents -+ + irelscan->r_offset -+ + INST_WORD_SIZE); -+ immediate = (instr_hi & 0x0000ffff) << 16; -+ immediate |= (instr_lo & 0x0000ffff); -+ offset = calc_fixup (irelscan->r_addend, 0, sec); -+ immediate -= offset; -+ irelscan->r_addend -= offset; -+ } -+ } -+ else if (ELF64_R_TYPE (irelscan->r_info) == (int) R_MICROBLAZE_64_PCREL) -+ { -+ isym = isymbuf + ELF64_R_SYM (irelscan->r_info); -+ -+ /* Look at the reloc only if the value has been resolved. */ -+ if (isym->st_shndx == shndx -+ && (ELF64_ST_TYPE (isym->st_info) == STT_SECTION)) -+ { -+ bfd_vma immediate; -+ bfd_vma target_address; -+ -+ if (ocontents == NULL) -+ { -+ if (elf_section_data (o)->this_hdr.contents != NULL) -+ ocontents = elf_section_data (o)->this_hdr.contents; -+ else -+ { -+ /* We always cache the section contents. -+ Perhaps, if info->keep_memory is FALSE, we -+ should free them, if we are permitted to. */ -+ if (o->rawsize == 0) -+ o->rawsize = o->size; -+ ocontents = (bfd_byte *) bfd_malloc (o->rawsize); -+ if (ocontents == NULL) -+ goto error_return; -+ if (!bfd_get_section_contents (abfd, o, ocontents, -+ (file_ptr) 0, -+ o->rawsize)) -+ goto error_return; -+ elf_section_data (o)->this_hdr.contents = ocontents; -+ } -+ } -+ unsigned long instr_hi = bfd_get_32 (abfd, ocontents -+ + irelscan->r_offset); -+ unsigned long instr_lo = bfd_get_32 (abfd, ocontents -+ + irelscan->r_offset -+ + INST_WORD_SIZE); -+ immediate = (instr_hi & 0x0000ffff) << 16; -+ immediate |= (instr_lo & 0x0000ffff); -+ target_address = immediate; -+ offset = calc_fixup (target_address, 0, sec); -+ immediate -= offset; -+ irelscan->r_addend -= offset; -+ microblaze_bfd_write_imm_value_64 (abfd, ocontents -+ + irelscan->r_offset, immediate); -+ } -+ } -+ } -+ } -+ -+ /* Adjust the local symbols defined in this section. */ -+ isymend = isymbuf + symtab_hdr->sh_info; -+ for (isym = isymbuf; isym < isymend; isym++) -+ { -+ if (isym->st_shndx == shndx) -+ { -+ isym->st_value -= calc_fixup (isym->st_value, 0, sec); -+ if (isym->st_size) -+ isym->st_size -= calc_fixup (isym->st_value, isym->st_size, sec); -+ } -+ } -+ -+ /* Now adjust the global symbols defined in this section. */ -+ isym = isymbuf + symtab_hdr->sh_info; -+ symcount = (symtab_hdr->sh_size / sizeof (Elf64_External_Sym)) - symtab_hdr->sh_info; -+ for (sym_index = 0; sym_index < symcount; sym_index++) -+ { -+ sym_hash = elf_sym_hashes (abfd)[sym_index]; -+ if ((sym_hash->root.type == bfd_link_hash_defined -+ || sym_hash->root.type == bfd_link_hash_defweak) -+ && sym_hash->root.u.def.section == sec) -+ { -+ sym_hash->root.u.def.value -= calc_fixup (sym_hash->root.u.def.value, -+ 0, sec); -+ if (sym_hash->size) -+ sym_hash->size -= calc_fixup (sym_hash->root.u.def.value, -+ sym_hash->size, sec); -+ } -+ } -+ -+ /* Physically move the code and change the cooked size. */ -+ dest = sec->relax[0].addr; -+ for (i = 0; i < sec->relax_count; i++) -+ { -+ int len; -+ src = sec->relax[i].addr + sec->relax[i].size; -+ len = sec->relax[i+1].addr - sec->relax[i].addr - sec->relax[i].size; -+ -+ memmove (contents + dest, contents + src, len); -+ sec->size -= sec->relax[i].size; -+ dest += len; -+ } -+ -+ elf_section_data (sec)->relocs = internal_relocs; -+ free_relocs = NULL; -+ -+ elf_section_data (sec)->this_hdr.contents = contents; -+ free_contents = NULL; -+ -+ symtab_hdr->contents = (bfd_byte *) isymbuf; -+ } -+ -+ if (free_relocs != NULL) -+ { -+ free (free_relocs); -+ free_relocs = NULL; -+ } -+ -+ if (free_contents != NULL) -+ { -+ if (!link_info->keep_memory) -+ free (free_contents); -+ else -+ /* Cache the section contents for elf_link_input_bfd. */ -+ elf_section_data (sec)->this_hdr.contents = contents; -+ free_contents = NULL; -+ } -+ -+ if (sec->relax_count == 0) -+ { -+ *again = FALSE; -+ free (sec->relax); -+ sec->relax = NULL; -+ } -+ else -+ *again = TRUE; -+ return TRUE; -+ -+ error_return: -+ if (free_relocs != NULL) -+ free (free_relocs); -+ if (free_contents != NULL) -+ free (free_contents); -+ if (sec->relax != NULL) -+ { -+ free (sec->relax); -+ sec->relax = NULL; -+ sec->relax_count = 0; -+ } -+ return FALSE; -+} -+ -+/* Return the section that should be marked against GC for a given -+ relocation. */ -+ -+static asection * -+microblaze_elf_gc_mark_hook (asection *sec, -+ struct bfd_link_info * info, -+ Elf_Internal_Rela * rel, -+ struct elf_link_hash_entry * h, -+ Elf_Internal_Sym * sym) -+{ -+ if (h != NULL) -+ switch (ELF64_R_TYPE (rel->r_info)) -+ { -+ case R_MICROBLAZE_GNU_VTINHERIT: -+ case R_MICROBLAZE_GNU_VTENTRY: -+ return NULL; -+ } -+ -+ return _bfd_elf_gc_mark_hook (sec, info, rel, h, sym); -+} -+ -+/* Update the got entry reference counts for the section being removed. */ -+ -+static bfd_boolean -+microblaze_elf_gc_sweep_hook (bfd * abfd ATTRIBUTE_UNUSED, -+ struct bfd_link_info * info ATTRIBUTE_UNUSED, -+ asection * sec ATTRIBUTE_UNUSED, -+ const Elf_Internal_Rela * relocs ATTRIBUTE_UNUSED) -+{ -+ return TRUE; -+} -+ -+/* PIC support. */ -+ -+#define PLT_ENTRY_SIZE 16 -+ -+#define PLT_ENTRY_WORD_0 0xb0000000 /* "imm 0". */ -+#define PLT_ENTRY_WORD_1 0xe9940000 /* "lwi r12,r20,0" - relocated to lwi r12,r20,func@GOT. */ -+#define PLT_ENTRY_WORD_1_NOPIC 0xe9800000 /* "lwi r12,r0,0" - non-PIC object. */ -+#define PLT_ENTRY_WORD_2 0x98186000 /* "brad r12". */ -+#define PLT_ENTRY_WORD_3 0x80000000 /* "nop". */ -+ -+/* Create .got, .gotplt, and .rela.got sections in DYNOBJ, and set up -+ shortcuts to them in our hash table. */ -+ -+static bfd_boolean -+create_got_section (bfd *dynobj, struct bfd_link_info *info) -+{ -+ struct elf64_mb_link_hash_table *htab; -+ -+ if (! _bfd_elf_create_got_section (dynobj, info)) -+ return FALSE; -+ htab = elf64_mb_hash_table (info); -+ if (htab == NULL) -+ return FALSE; -+ -+ htab->sgot = bfd_get_linker_section (dynobj, ".got"); -+ htab->sgotplt = bfd_get_linker_section (dynobj, ".got.plt"); -+ if (!htab->sgot || !htab->sgotplt) -+ return FALSE; -+ -+ if ((htab->srelgot = bfd_get_linker_section (dynobj, ".rela.got")) == NULL) -+ htab->srelgot = bfd_make_section_anyway (dynobj, ".rela.got"); -+ if (htab->srelgot == NULL -+ || ! bfd_set_section_flags (dynobj, htab->srelgot, SEC_ALLOC -+ | SEC_LOAD -+ | SEC_HAS_CONTENTS -+ | SEC_IN_MEMORY -+ | SEC_LINKER_CREATED -+ | SEC_READONLY) -+ || ! bfd_set_section_alignment (dynobj, htab->srelgot, 2)) -+ return FALSE; -+ return TRUE; -+} -+ -+static bfd_boolean -+update_local_sym_info (bfd *abfd, -+ Elf_Internal_Shdr *symtab_hdr, -+ unsigned long r_symndx, -+ unsigned int tls_type) -+{ -+ bfd_signed_vma *local_got_refcounts = elf_local_got_refcounts (abfd); -+ unsigned char *local_got_tls_masks; -+ -+ if (local_got_refcounts == NULL) -+ { -+ bfd_size_type size = symtab_hdr->sh_info; -+ -+ size *= (sizeof (*local_got_refcounts) + sizeof (*local_got_tls_masks)); -+ local_got_refcounts = bfd_zalloc (abfd, size); -+ if (local_got_refcounts == NULL) -+ return FALSE; -+ elf_local_got_refcounts (abfd) = local_got_refcounts; -+ } -+ -+ local_got_tls_masks = -+ (unsigned char *) (local_got_refcounts + symtab_hdr->sh_info); -+ local_got_tls_masks[r_symndx] |= tls_type; -+ local_got_refcounts[r_symndx] += 1; -+ -+ return TRUE; -+} -+/* Look through the relocs for a section during the first phase. */ -+ -+static bfd_boolean -+microblaze_elf_check_relocs (bfd * abfd, -+ struct bfd_link_info * info, -+ asection * sec, -+ const Elf_Internal_Rela * relocs) -+{ -+ Elf_Internal_Shdr * symtab_hdr; -+ struct elf_link_hash_entry ** sym_hashes; -+ struct elf_link_hash_entry ** sym_hashes_end; -+ const Elf_Internal_Rela * rel; -+ const Elf_Internal_Rela * rel_end; -+ struct elf64_mb_link_hash_table *htab; -+ asection *sreloc = NULL; -+ -+ if (bfd_link_relocatable (info)) -+ return TRUE; -+ -+ htab = elf64_mb_hash_table (info); -+ if (htab == NULL) -+ return FALSE; -+ -+ symtab_hdr = & elf_tdata (abfd)->symtab_hdr; -+ sym_hashes = elf_sym_hashes (abfd); -+ sym_hashes_end = sym_hashes + symtab_hdr->sh_size / sizeof (Elf64_External_Sym); -+ if (!elf_bad_symtab (abfd)) -+ sym_hashes_end -= symtab_hdr->sh_info; -+ -+ rel_end = relocs + sec->reloc_count; -+ -+ for (rel = relocs; rel < rel_end; rel++) -+ { -+ unsigned int r_type; -+ struct elf_link_hash_entry * h; -+ unsigned long r_symndx; -+ unsigned char tls_type = 0; -+ -+ r_symndx = ELF64_R_SYM (rel->r_info); -+ r_type = ELF64_R_TYPE (rel->r_info); -+ -+ if (r_symndx < symtab_hdr->sh_info) -+ h = NULL; -+ else -+ { -+ h = sym_hashes [r_symndx - symtab_hdr->sh_info]; -+ -+ /* PR15323, ref flags aren't set for references in the same -+ object. */ -+ h->root.non_ir_ref = 1; -+ } -+ -+ switch (r_type) -+ { -+ /* This relocation describes the C++ object vtable hierarchy. -+ Reconstruct it for later use during GC. */ -+ case R_MICROBLAZE_GNU_VTINHERIT: -+ if (!bfd_elf_gc_record_vtinherit (abfd, sec, h, rel->r_offset)) -+ return FALSE; -+ break; -+ -+ /* This relocation describes which C++ vtable entries are actually -+ used. Record for later use during GC. */ -+ case R_MICROBLAZE_GNU_VTENTRY: -+ if (!bfd_elf_gc_record_vtentry (abfd, sec, h, rel->r_addend)) -+ return FALSE; -+ break; -+ -+ /* This relocation requires .plt entry. */ -+ case R_MICROBLAZE_PLT_64: -+ if (h != NULL) -+ { -+ h->needs_plt = 1; -+ h->plt.refcount += 1; -+ } -+ break; -+ -+ /* This relocation requires .got entry. */ -+ case R_MICROBLAZE_TLSGD: -+ tls_type |= (TLS_TLS | TLS_GD); -+ goto dogottls; -+ case R_MICROBLAZE_TLSLD: -+ tls_type |= (TLS_TLS | TLS_LD); -+ dogottls: -+ sec->has_tls_reloc = 1; -+ case R_MICROBLAZE_GOT_64: -+ if (htab->sgot == NULL) -+ { -+ if (htab->elf.dynobj == NULL) -+ htab->elf.dynobj = abfd; -+ if (!create_got_section (htab->elf.dynobj, info)) -+ return FALSE; -+ } -+ if (h != NULL) -+ { -+ h->got.refcount += 1; -+ elf64_mb_hash_entry (h)->tls_mask |= tls_type; -+ } -+ else -+ { -+ if (! update_local_sym_info(abfd, symtab_hdr, r_symndx, tls_type) ) -+ return FALSE; -+ } -+ break; -+ -+ case R_MICROBLAZE_64: -+ case R_MICROBLAZE_64_PCREL: -+ case R_MICROBLAZE_32: -+ { -+ if (h != NULL && !bfd_link_pic (info)) -+ { -+ /* we may need a copy reloc. */ -+ h->non_got_ref = 1; -+ -+ /* we may also need a .plt entry. */ -+ h->plt.refcount += 1; -+ if (ELF64_R_TYPE (rel->r_info) != R_MICROBLAZE_64_PCREL) -+ h->pointer_equality_needed = 1; -+ } -+ -+ -+ /* If we are creating a shared library, and this is a reloc -+ against a global symbol, or a non PC relative reloc -+ against a local symbol, then we need to copy the reloc -+ into the shared library. However, if we are linking with -+ -Bsymbolic, we do not need to copy a reloc against a -+ global symbol which is defined in an object we are -+ including in the link (i.e., DEF_REGULAR is set). At -+ this point we have not seen all the input files, so it is -+ possible that DEF_REGULAR is not set now but will be set -+ later (it is never cleared). In case of a weak definition, -+ DEF_REGULAR may be cleared later by a strong definition in -+ a shared library. We account for that possibility below by -+ storing information in the relocs_copied field of the hash -+ table entry. A similar situation occurs when creating -+ shared libraries and symbol visibility changes render the -+ symbol local. -+ -+ If on the other hand, we are creating an executable, we -+ may need to keep relocations for symbols satisfied by a -+ dynamic library if we manage to avoid copy relocs for the -+ symbol. */ -+ -+ if ((bfd_link_pic (info) -+ && (sec->flags & SEC_ALLOC) != 0 -+ && (r_type != R_MICROBLAZE_64_PCREL -+ || (h != NULL -+ && (! info->symbolic -+ || h->root.type == bfd_link_hash_defweak -+ || !h->def_regular)))) -+ || (!bfd_link_pic (info) -+ && (sec->flags & SEC_ALLOC) != 0 -+ && h != NULL -+ && (h->root.type == bfd_link_hash_defweak -+ || !h->def_regular))) -+ { -+ struct elf64_mb_dyn_relocs *p; -+ struct elf64_mb_dyn_relocs **head; -+ -+ /* When creating a shared object, we must copy these -+ relocs into the output file. We create a reloc -+ section in dynobj and make room for the reloc. */ -+ -+ if (sreloc == NULL) -+ { -+ bfd *dynobj; -+ -+ if (htab->elf.dynobj == NULL) -+ htab->elf.dynobj = abfd; -+ dynobj = htab->elf.dynobj; -+ -+ sreloc = _bfd_elf_make_dynamic_reloc_section (sec, dynobj, -+ 2, abfd, 1); -+ if (sreloc == NULL) -+ return FALSE; -+ } -+ -+ /* If this is a global symbol, we count the number of -+ relocations we need for this symbol. */ -+ if (h != NULL) -+ head = &((struct elf64_mb_link_hash_entry *) h)->dyn_relocs; -+ else -+ { -+ /* Track dynamic relocs needed for local syms too. -+ We really need local syms available to do this -+ easily. Oh well. */ -+ -+ asection *s; -+ Elf_Internal_Sym *isym; -+ void *vpp; -+ -+ isym = bfd_sym_from_r_symndx (&htab->sym_sec, -+ abfd, r_symndx); -+ if (isym == NULL) -+ return FALSE; -+ -+ s = bfd_section_from_elf_index (abfd, isym->st_shndx); -+ if (s == NULL) -+ return FALSE; -+ -+ vpp = &elf_section_data (s)->local_dynrel; -+ head = (struct elf64_mb_dyn_relocs **) vpp; -+ } -+ -+ p = *head; -+ if (p == NULL || p->sec != sec) -+ { -+ bfd_size_type amt = sizeof *p; -+ p = ((struct elf64_mb_dyn_relocs *) -+ bfd_alloc (htab->elf.dynobj, amt)); -+ if (p == NULL) -+ return FALSE; -+ p->next = *head; -+ *head = p; -+ p->sec = sec; -+ p->count = 0; -+ p->pc_count = 0; -+ } -+ -+ p->count += 1; -+ if (r_type == R_MICROBLAZE_64_PCREL) -+ p->pc_count += 1; -+ } -+ } -+ break; -+ } -+ } -+ -+ return TRUE; -+} -+ -+static bfd_boolean -+microblaze_elf_create_dynamic_sections (bfd *dynobj, struct bfd_link_info *info) -+{ -+ struct elf64_mb_link_hash_table *htab; -+ -+ htab = elf64_mb_hash_table (info); -+ if (htab == NULL) -+ return FALSE; -+ -+ if (!htab->sgot && !create_got_section (dynobj, info)) -+ return FALSE; -+ -+ if (!_bfd_elf_create_dynamic_sections (dynobj, info)) -+ return FALSE; -+ -+ htab->splt = bfd_get_linker_section (dynobj, ".plt"); -+ htab->srelplt = bfd_get_linker_section (dynobj, ".rela.plt"); -+ htab->sdynbss = bfd_get_linker_section (dynobj, ".dynbss"); -+ if (!bfd_link_pic (info)) -+ htab->srelbss = bfd_get_linker_section (dynobj, ".rela.bss"); -+ -+ if (!htab->splt || !htab->srelplt || !htab->sdynbss -+ || (!bfd_link_pic (info) && !htab->srelbss)) -+ abort (); -+ -+ return TRUE; -+} -+ -+/* Copy the extra info we tack onto an elf_link_hash_entry. */ -+ -+static void -+microblaze_elf_copy_indirect_symbol (struct bfd_link_info *info, -+ struct elf_link_hash_entry *dir, -+ struct elf_link_hash_entry *ind) -+{ -+ struct elf64_mb_link_hash_entry *edir, *eind; -+ -+ edir = (struct elf64_mb_link_hash_entry *) dir; -+ eind = (struct elf64_mb_link_hash_entry *) ind; -+ -+ if (eind->dyn_relocs != NULL) -+ { -+ if (edir->dyn_relocs != NULL) -+ { -+ struct elf64_mb_dyn_relocs **pp; -+ struct elf64_mb_dyn_relocs *p; -+ -+ if (ind->root.type == bfd_link_hash_indirect) -+ abort (); -+ -+ /* Add reloc counts against the weak sym to the strong sym -+ list. Merge any entries against the same section. */ -+ for (pp = &eind->dyn_relocs; (p = *pp) != NULL; ) -+ { -+ struct elf64_mb_dyn_relocs *q; -+ -+ for (q = edir->dyn_relocs; q != NULL; q = q->next) -+ if (q->sec == p->sec) -+ { -+ q->pc_count += p->pc_count; -+ q->count += p->count; -+ *pp = p->next; -+ break; -+ } -+ if (q == NULL) -+ pp = &p->next; -+ } -+ *pp = edir->dyn_relocs; -+ } -+ -+ edir->dyn_relocs = eind->dyn_relocs; -+ eind->dyn_relocs = NULL; -+ } -+ -+ edir->tls_mask |= eind->tls_mask; -+ -+ _bfd_elf_link_hash_copy_indirect (info, dir, ind); -+} -+ -+static bfd_boolean -+microblaze_elf_adjust_dynamic_symbol (struct bfd_link_info *info, -+ struct elf_link_hash_entry *h) -+{ -+ struct elf64_mb_link_hash_table *htab; -+ struct elf64_mb_link_hash_entry * eh; -+ struct elf64_mb_dyn_relocs *p; -+ asection *sdynbss, *s; -+ unsigned int power_of_two; -+ bfd *dynobj; -+ -+ htab = elf64_mb_hash_table (info); -+ if (htab == NULL) -+ return FALSE; -+ -+ /* If this is a function, put it in the procedure linkage table. We -+ will fill in the contents of the procedure linkage table later, -+ when we know the address of the .got section. */ -+ if (h->type == STT_FUNC -+ || h->needs_plt) -+ { -+ if (h->plt.refcount <= 0 -+ || SYMBOL_CALLS_LOCAL (info, h) -+ || (ELF_ST_VISIBILITY (h->other) != STV_DEFAULT -+ && h->root.type == bfd_link_hash_undefweak)) -+ { -+ /* This case can occur if we saw a PLT reloc in an input -+ file, but the symbol was never referred to by a dynamic -+ object, or if all references were garbage collected. In -+ such a case, we don't actually need to build a procedure -+ linkage table, and we can just do a PC32 reloc instead. */ -+ h->plt.offset = (bfd_vma) -1; -+ h->needs_plt = 0; -+ } -+ -+ return TRUE; -+ } -+ else -+ /* It's possible that we incorrectly decided a .plt reloc was -+ needed for an R_MICROBLAZE_64_PCREL reloc to a non-function sym in -+ check_relocs. We can't decide accurately between function and -+ non-function syms in check-relocs; Objects loaded later in -+ the link may change h->type. So fix it now. */ -+ h->plt.offset = (bfd_vma) -1; -+ -+ /* If this is a weak symbol, and there is a real definition, the -+ processor independent code will have arranged for us to see the -+ real definition first, and we can just use the same value. */ -+ if (h->u.weakdef != NULL) -+ { -+ BFD_ASSERT (h->u.weakdef->root.type == bfd_link_hash_defined -+ || h->u.weakdef->root.type == bfd_link_hash_defweak); -+ h->root.u.def.section = h->u.weakdef->root.u.def.section; -+ h->root.u.def.value = h->u.weakdef->root.u.def.value; -+ return TRUE; -+ } -+ -+ /* This is a reference to a symbol defined by a dynamic object which -+ is not a function. */ -+ -+ /* If we are creating a shared library, we must presume that the -+ only references to the symbol are via the global offset table. -+ For such cases we need not do anything here; the relocations will -+ be handled correctly by relocate_section. */ -+ if (bfd_link_pic (info)) -+ return TRUE; -+ -+ /* If there are no references to this symbol that do not use the -+ GOT, we don't need to generate a copy reloc. */ -+ if (!h->non_got_ref) -+ return TRUE; -+ -+ /* If -z nocopyreloc was given, we won't generate them either. */ -+ if (info->nocopyreloc) -+ { -+ h->non_got_ref = 0; -+ return TRUE; -+ } -+ -+ eh = (struct elf64_mb_link_hash_entry *) h; -+ for (p = eh->dyn_relocs; p != NULL; p = p->next) -+ { -+ s = p->sec->output_section; -+ if (s != NULL && (s->flags & SEC_READONLY) != 0) -+ break; -+ } -+ -+ /* If we didn't find any dynamic relocs in read-only sections, then -+ we'll be keeping the dynamic relocs and avoiding the copy reloc. */ -+ if (p == NULL) -+ { -+ h->non_got_ref = 0; -+ return TRUE; -+ } -+ -+ /* We must allocate the symbol in our .dynbss section, which will -+ become part of the .bss section of the executable. There will be -+ an entry for this symbol in the .dynsym section. The dynamic -+ object will contain position independent code, so all references -+ from the dynamic object to this symbol will go through the global -+ offset table. The dynamic linker will use the .dynsym entry to -+ determine the address it must put in the global offset table, so -+ both the dynamic object and the regular object will refer to the -+ same memory location for the variable. */ -+ -+ /* We must generate a R_MICROBLAZE_COPY reloc to tell the dynamic linker -+ to copy the initial value out of the dynamic object and into the -+ runtime process image. */ -+ dynobj = elf_hash_table (info)->dynobj; -+ BFD_ASSERT (dynobj != NULL); -+ if ((h->root.u.def.section->flags & SEC_ALLOC) != 0) -+ { -+ htab->srelbss->size += sizeof (Elf64_External_Rela); -+ h->needs_copy = 1; -+ } -+ -+ /* We need to figure out the alignment required for this symbol. I -+ have no idea how ELF linkers handle this. */ -+ power_of_two = bfd_log2 (h->size); -+ if (power_of_two > 3) -+ power_of_two = 3; -+ -+ sdynbss = htab->sdynbss; -+ /* Apply the required alignment. */ -+ sdynbss->size = BFD_ALIGN (sdynbss->size, (bfd_size_type) (1 << power_of_two)); -+ if (power_of_two > bfd_get_section_alignment (dynobj, sdynbss)) -+ { -+ if (! bfd_set_section_alignment (dynobj, sdynbss, power_of_two)) -+ return FALSE; -+ } -+ -+ /* Define the symbol as being at this point in the section. */ -+ h->root.u.def.section = sdynbss; -+ h->root.u.def.value = sdynbss->size; -+ -+ /* Increment the section size to make room for the symbol. */ -+ sdynbss->size += h->size; -+ return TRUE; -+} -+ -+/* Allocate space in .plt, .got and associated reloc sections for -+ dynamic relocs. */ -+ -+static bfd_boolean -+allocate_dynrelocs (struct elf_link_hash_entry *h, void * dat) -+{ -+ struct bfd_link_info *info; -+ struct elf64_mb_link_hash_table *htab; -+ struct elf64_mb_link_hash_entry *eh; -+ struct elf64_mb_dyn_relocs *p; -+ -+ if (h->root.type == bfd_link_hash_indirect) -+ return TRUE; -+ -+ info = (struct bfd_link_info *) dat; -+ htab = elf64_mb_hash_table (info); -+ if (htab == NULL) -+ return FALSE; -+ -+ if (htab->elf.dynamic_sections_created -+ && h->plt.refcount > 0) -+ { -+ /* Make sure this symbol is output as a dynamic symbol. -+ Undefined weak syms won't yet be marked as dynamic. */ -+ if (h->dynindx == -1 -+ && !h->forced_local) -+ { -+ if (! bfd_elf_link_record_dynamic_symbol (info, h)) -+ return FALSE; -+ } -+ -+ if (WILL_CALL_FINISH_DYNAMIC_SYMBOL (1, bfd_link_pic (info), h)) -+ { -+ asection *s = htab->splt; -+ -+ /* The first entry in .plt is reserved. */ -+ if (s->size == 0) -+ s->size = PLT_ENTRY_SIZE; -+ -+ h->plt.offset = s->size; -+ -+ /* If this symbol is not defined in a regular file, and we are -+ not generating a shared library, then set the symbol to this -+ location in the .plt. This is required to make function -+ pointers compare as equal between the normal executable and -+ the shared library. */ -+ if (! bfd_link_pic (info) -+ && !h->def_regular) -+ { -+ h->root.u.def.section = s; -+ h->root.u.def.value = h->plt.offset; -+ } -+ -+ /* Make room for this entry. */ -+ s->size += PLT_ENTRY_SIZE; -+ -+ /* We also need to make an entry in the .got.plt section, which -+ will be placed in the .got section by the linker script. */ -+ htab->sgotplt->size += 4; -+ -+ /* We also need to make an entry in the .rel.plt section. */ -+ htab->srelplt->size += sizeof (Elf64_External_Rela); -+ } -+ else -+ { -+ h->plt.offset = (bfd_vma) -1; -+ h->needs_plt = 0; -+ } -+ } -+ else -+ { -+ h->plt.offset = (bfd_vma) -1; -+ h->needs_plt = 0; -+ } -+ -+ eh = (struct elf64_mb_link_hash_entry *) h; -+ if (h->got.refcount > 0) -+ { -+ unsigned int need; -+ asection *s; -+ -+ /* Make sure this symbol is output as a dynamic symbol. -+ Undefined weak syms won't yet be marked as dynamic. */ -+ if (h->dynindx == -1 -+ && !h->forced_local) -+ { -+ if (! bfd_elf_link_record_dynamic_symbol (info, h)) -+ return FALSE; -+ } -+ -+ need = 0; -+ if ((eh->tls_mask & TLS_TLS) != 0) -+ { -+ /* Handle TLS Symbol */ -+ if ((eh->tls_mask & TLS_LD) != 0) -+ { -+ if (!eh->elf.def_dynamic) -+ /* We'll just use htab->tlsld_got.offset. This should -+ always be the case. It's a little odd if we have -+ a local dynamic reloc against a non-local symbol. */ -+ htab->tlsld_got.refcount += 1; -+ else -+ need += 8; -+ } -+ if ((eh->tls_mask & TLS_GD) != 0) -+ need += 8; -+ } -+ else -+ { -+ /* Regular (non-TLS) symbol */ -+ need += 4; -+ } -+ if (need == 0) -+ { -+ h->got.offset = (bfd_vma) -1; -+ } -+ else -+ { -+ s = htab->sgot; -+ h->got.offset = s->size; -+ s->size += need; -+ htab->srelgot->size += need * (sizeof (Elf64_External_Rela) / 4); -+ } -+ } -+ else -+ h->got.offset = (bfd_vma) -1; -+ -+ if (eh->dyn_relocs == NULL) -+ return TRUE; -+ -+ /* In the shared -Bsymbolic case, discard space allocated for -+ dynamic pc-relative relocs against symbols which turn out to be -+ defined in regular objects. For the normal shared case, discard -+ space for pc-relative relocs that have become local due to symbol -+ visibility changes. */ -+ -+ if (bfd_link_pic (info)) -+ { -+ if (h->def_regular -+ && (h->forced_local -+ || info->symbolic)) -+ { -+ struct elf64_mb_dyn_relocs **pp; -+ -+ for (pp = &eh->dyn_relocs; (p = *pp) != NULL; ) -+ { -+ p->count -= p->pc_count; -+ p->pc_count = 0; -+ if (p->count == 0) -+ *pp = p->next; -+ else -+ pp = &p->next; -+ } -+ } -+ } -+ else -+ { -+ /* For the non-shared case, discard space for relocs against -+ symbols which turn out to need copy relocs or are not -+ dynamic. */ -+ -+ if (!h->non_got_ref -+ && ((h->def_dynamic -+ && !h->def_regular) -+ || (htab->elf.dynamic_sections_created -+ && (h->root.type == bfd_link_hash_undefweak -+ || h->root.type == bfd_link_hash_undefined)))) -+ { -+ /* Make sure this symbol is output as a dynamic symbol. -+ Undefined weak syms won't yet be marked as dynamic. */ -+ if (h->dynindx == -1 -+ && !h->forced_local) -+ { -+ if (! bfd_elf_link_record_dynamic_symbol (info, h)) -+ return FALSE; -+ } -+ -+ /* If that succeeded, we know we'll be keeping all the -+ relocs. */ -+ if (h->dynindx != -1) -+ goto keep; -+ } -+ -+ eh->dyn_relocs = NULL; -+ -+ keep: ; -+ } -+ -+ /* Finally, allocate space. */ -+ for (p = eh->dyn_relocs; p != NULL; p = p->next) -+ { -+ asection *sreloc = elf_section_data (p->sec)->sreloc; -+ sreloc->size += p->count * sizeof (Elf64_External_Rela); -+ } -+ -+ return TRUE; -+} -+ -+/* Set the sizes of the dynamic sections. */ -+ -+static bfd_boolean -+microblaze_elf_size_dynamic_sections (bfd *output_bfd ATTRIBUTE_UNUSED, -+ struct bfd_link_info *info) -+{ -+ struct elf64_mb_link_hash_table *htab; -+ bfd *dynobj; -+ asection *s; -+ bfd *ibfd; -+ -+ htab = elf64_mb_hash_table (info); -+ if (htab == NULL) -+ return FALSE; -+ -+ dynobj = htab->elf.dynobj; -+ BFD_ASSERT (dynobj != NULL); -+ -+ /* Set up .got offsets for local syms, and space for local dynamic -+ relocs. */ -+ for (ibfd = info->input_bfds; ibfd != NULL; ibfd = ibfd->link.next) -+ { -+ bfd_signed_vma *local_got; -+ bfd_signed_vma *end_local_got; -+ bfd_size_type locsymcount; -+ Elf_Internal_Shdr *symtab_hdr; -+ unsigned char *lgot_masks; -+ asection *srel; -+ -+ if (bfd_get_flavour (ibfd) != bfd_target_elf_flavour) -+ continue; -+ -+ for (s = ibfd->sections; s != NULL; s = s->next) -+ { -+ struct elf64_mb_dyn_relocs *p; -+ -+ for (p = ((struct elf64_mb_dyn_relocs *) -+ elf_section_data (s)->local_dynrel); -+ p != NULL; -+ p = p->next) -+ { -+ if (!bfd_is_abs_section (p->sec) -+ && bfd_is_abs_section (p->sec->output_section)) -+ { -+ /* Input section has been discarded, either because -+ it is a copy of a linkonce section or due to -+ linker script /DISCARD/, so we'll be discarding -+ the relocs too. */ -+ } -+ else if (p->count != 0) -+ { -+ srel = elf_section_data (p->sec)->sreloc; -+ srel->size += p->count * sizeof (Elf64_External_Rela); -+ if ((p->sec->output_section->flags & SEC_READONLY) != 0) -+ info->flags |= DF_TEXTREL; -+ } -+ } -+ } -+ -+ local_got = elf_local_got_refcounts (ibfd); -+ if (!local_got) -+ continue; -+ -+ symtab_hdr = &elf_tdata (ibfd)->symtab_hdr; -+ locsymcount = symtab_hdr->sh_info; -+ end_local_got = local_got + locsymcount; -+ lgot_masks = (unsigned char *) end_local_got; -+ s = htab->sgot; -+ srel = htab->srelgot; -+ -+ for (; local_got < end_local_got; ++local_got, ++lgot_masks) -+ { -+ if (*local_got > 0) -+ { -+ unsigned int need = 0; -+ if ((*lgot_masks & TLS_TLS) != 0) -+ { -+ if ((*lgot_masks & TLS_GD) != 0) -+ need += 8; -+ if ((*lgot_masks & TLS_LD) != 0) -+ htab->tlsld_got.refcount += 1; -+ } -+ else -+ need += 4; -+ -+ if (need == 0) -+ { -+ *local_got = (bfd_vma) -1; -+ } -+ else -+ { -+ *local_got = s->size; -+ s->size += need; -+ if (bfd_link_pic (info)) -+ srel->size += need * (sizeof (Elf64_External_Rela) / 4); -+ } -+ } -+ else -+ *local_got = (bfd_vma) -1; -+ } -+ } -+ -+ /* Allocate global sym .plt and .got entries, and space for global -+ sym dynamic relocs. */ -+ elf_link_hash_traverse (elf_hash_table (info), allocate_dynrelocs, info); -+ -+ if (htab->tlsld_got.refcount > 0) -+ { -+ htab->tlsld_got.offset = htab->sgot->size; -+ htab->sgot->size += 8; -+ if (bfd_link_pic (info)) -+ htab->srelgot->size += sizeof (Elf64_External_Rela); -+ } -+ else -+ htab->tlsld_got.offset = (bfd_vma) -1; -+ -+ if (elf_hash_table (info)->dynamic_sections_created) -+ { -+ /* Make space for the trailing nop in .plt. */ -+ if (htab->splt->size > 0) -+ htab->splt->size += 4; -+ } -+ -+ /* The check_relocs and adjust_dynamic_symbol entry points have -+ determined the sizes of the various dynamic sections. Allocate -+ memory for them. */ -+ for (s = dynobj->sections; s != NULL; s = s->next) -+ { -+ const char *name; -+ bfd_boolean strip = FALSE; -+ -+ if ((s->flags & SEC_LINKER_CREATED) == 0) -+ continue; -+ -+ /* It's OK to base decisions on the section name, because none -+ of the dynobj section names depend upon the input files. */ -+ name = bfd_get_section_name (dynobj, s); -+ -+ if (strncmp (name, ".rela", 5) == 0) -+ { -+ if (s->size == 0) -+ { -+ /* If we don't need this section, strip it from the -+ output file. This is to handle .rela.bss and -+ .rela.plt. We must create it in -+ create_dynamic_sections, because it must be created -+ before the linker maps input sections to output -+ sections. The linker does that before -+ adjust_dynamic_symbol is called, and it is that -+ function which decides whether anything needs to go -+ into these sections. */ -+ strip = TRUE; -+ } -+ else -+ { -+ /* We use the reloc_count field as a counter if we need -+ to copy relocs into the output file. */ -+ s->reloc_count = 0; -+ } -+ } -+ else if (s != htab->splt && s != htab->sgot && s != htab->sgotplt) -+ { -+ /* It's not one of our sections, so don't allocate space. */ -+ continue; -+ } -+ -+ if (strip) -+ { -+ s->flags |= SEC_EXCLUDE; -+ continue; -+ } -+ -+ /* Allocate memory for the section contents. */ -+ /* FIXME: This should be a call to bfd_alloc not bfd_zalloc. -+ Unused entries should be reclaimed before the section's contents -+ are written out, but at the moment this does not happen. Thus in -+ order to prevent writing out garbage, we initialise the section's -+ contents to zero. */ -+ s->contents = (bfd_byte *) bfd_zalloc (dynobj, s->size); -+ if (s->contents == NULL && s->size != 0) -+ return FALSE; -+ } -+ -+ if (elf_hash_table (info)->dynamic_sections_created) -+ { -+ /* Add some entries to the .dynamic section. We fill in the -+ values later, in microblaze_elf_finish_dynamic_sections, but we -+ must add the entries now so that we get the correct size for -+ the .dynamic section. The DT_DEBUG entry is filled in by the -+ dynamic linker and used by the debugger. */ -+#define add_dynamic_entry(TAG, VAL) \ -+ _bfd_elf_add_dynamic_entry (info, TAG, VAL) -+ -+ if (bfd_link_executable (info)) -+ { -+ if (!add_dynamic_entry (DT_DEBUG, 0)) -+ return FALSE; -+ } -+ -+ if (!add_dynamic_entry (DT_RELA, 0) -+ || !add_dynamic_entry (DT_RELASZ, 0) -+ || !add_dynamic_entry (DT_RELAENT, sizeof (Elf64_External_Rela))) -+ return FALSE; -+ -+ if (htab->splt->size != 0) -+ { -+ if (!add_dynamic_entry (DT_PLTGOT, 0) -+ || !add_dynamic_entry (DT_PLTRELSZ, 0) -+ || !add_dynamic_entry (DT_PLTREL, DT_RELA) -+ || !add_dynamic_entry (DT_JMPREL, 0) -+ || !add_dynamic_entry (DT_BIND_NOW, 1)) -+ return FALSE; -+ } -+ -+ if (info->flags & DF_TEXTREL) -+ { -+ if (!add_dynamic_entry (DT_TEXTREL, 0)) -+ return FALSE; -+ } -+ } -+#undef add_dynamic_entry -+ return TRUE; -+} -+ -+/* Finish up dynamic symbol handling. We set the contents of various -+ dynamic sections here. */ -+ -+static bfd_boolean -+microblaze_elf_finish_dynamic_symbol (bfd *output_bfd, -+ struct bfd_link_info *info, -+ struct elf_link_hash_entry *h, -+ Elf_Internal_Sym *sym) -+{ -+ struct elf64_mb_link_hash_table *htab; -+ struct elf64_mb_link_hash_entry *eh = elf64_mb_hash_entry(h); -+ -+ htab = elf64_mb_hash_table (info); -+ if (htab == NULL) -+ return FALSE; -+ -+ if (h->plt.offset != (bfd_vma) -1) -+ { -+ asection *splt; -+ asection *srela; -+ asection *sgotplt; -+ Elf_Internal_Rela rela; -+ bfd_byte *loc; -+ bfd_vma plt_index; -+ bfd_vma got_offset; -+ bfd_vma got_addr; -+ -+ /* This symbol has an entry in the procedure linkage table. Set -+ it up. */ -+ BFD_ASSERT (h->dynindx != -1); -+ -+ splt = htab->splt; -+ srela = htab->srelplt; -+ sgotplt = htab->sgotplt; -+ BFD_ASSERT (splt != NULL && srela != NULL && sgotplt != NULL); -+ -+ plt_index = h->plt.offset / PLT_ENTRY_SIZE - 1; /* first entry reserved. */ -+ got_offset = (plt_index + 3) * 4; /* 3 reserved ??? */ -+ got_addr = got_offset; -+ -+ /* For non-PIC objects we need absolute address of the GOT entry. */ -+ if (!bfd_link_pic (info)) -+ got_addr += htab->sgotplt->output_section->vma + sgotplt->output_offset; -+ -+ /* Fill in the entry in the procedure linkage table. */ -+ bfd_put_32 (output_bfd, PLT_ENTRY_WORD_0 + ((got_addr >> 16) & 0xffff), -+ splt->contents + h->plt.offset); -+ if (bfd_link_pic (info)) -+ bfd_put_32 (output_bfd, PLT_ENTRY_WORD_1 + (got_addr & 0xffff), -+ splt->contents + h->plt.offset + 4); -+ else -+ bfd_put_32 (output_bfd, PLT_ENTRY_WORD_1_NOPIC + (got_addr & 0xffff), -+ splt->contents + h->plt.offset + 4); -+ bfd_put_32 (output_bfd, (bfd_vma) PLT_ENTRY_WORD_2, -+ splt->contents + h->plt.offset + 8); -+ bfd_put_32 (output_bfd, (bfd_vma) PLT_ENTRY_WORD_3, -+ splt->contents + h->plt.offset + 12); -+ -+ /* Any additions to the .got section??? */ -+ /* bfd_put_32 (output_bfd, -+ splt->output_section->vma + splt->output_offset + h->plt.offset + 4, -+ sgotplt->contents + got_offset); */ -+ -+ /* Fill in the entry in the .rela.plt section. */ -+ rela.r_offset = (sgotplt->output_section->vma -+ + sgotplt->output_offset -+ + got_offset); -+ rela.r_info = ELF64_R_INFO (h->dynindx, R_MICROBLAZE_JUMP_SLOT); -+ rela.r_addend = 0; -+ loc = srela->contents; -+ loc += plt_index * sizeof (Elf64_External_Rela); -+ bfd_elf64_swap_reloca_out (output_bfd, &rela, loc); -+ -+ if (!h->def_regular) -+ { -+ /* Mark the symbol as undefined, rather than as defined in -+ the .plt section. Zero the value. */ -+ sym->st_shndx = SHN_UNDEF; -+ sym->st_value = 0; -+ } -+ } -+ -+ /* h->got.refcount to be checked ? */ -+ if (h->got.offset != (bfd_vma) -1 && -+ ! ((h->got.offset & 1) || -+ IS_TLS_LD(eh->tls_mask) || IS_TLS_GD(eh->tls_mask))) -+ { -+ asection *sgot; -+ asection *srela; -+ bfd_vma offset; -+ -+ /* This symbol has an entry in the global offset table. Set it -+ up. */ -+ -+ sgot = htab->sgot; -+ srela = htab->srelgot; -+ BFD_ASSERT (sgot != NULL && srela != NULL); -+ -+ offset = (sgot->output_section->vma + sgot->output_offset -+ + (h->got.offset &~ (bfd_vma) 1)); -+ -+ /* If this is a -Bsymbolic link, and the symbol is defined -+ locally, we just want to emit a RELATIVE reloc. Likewise if -+ the symbol was forced to be local because of a version file. -+ The entry in the global offset table will already have been -+ initialized in the relocate_section function. */ -+ if (bfd_link_pic (info) -+ && ((info->symbolic && h->def_regular) -+ || h->dynindx == -1)) -+ { -+ asection *sec = h->root.u.def.section; -+ microblaze_elf_output_dynamic_relocation (output_bfd, -+ srela, srela->reloc_count++, -+ /* symindex= */ 0, -+ R_MICROBLAZE_REL, offset, -+ h->root.u.def.value -+ + sec->output_section->vma -+ + sec->output_offset); -+ } -+ else -+ { -+ microblaze_elf_output_dynamic_relocation (output_bfd, -+ srela, srela->reloc_count++, -+ h->dynindx, -+ R_MICROBLAZE_GLOB_DAT, -+ offset, 0); -+ } -+ -+ bfd_put_32 (output_bfd, (bfd_vma) 0, -+ sgot->contents + (h->got.offset &~ (bfd_vma) 1)); -+ } -+ -+ if (h->needs_copy) -+ { -+ asection *s; -+ Elf_Internal_Rela rela; -+ bfd_byte *loc; -+ -+ /* This symbols needs a copy reloc. Set it up. */ -+ -+ BFD_ASSERT (h->dynindx != -1); -+ -+ s = bfd_get_linker_section (htab->elf.dynobj, ".rela.bss"); -+ BFD_ASSERT (s != NULL); -+ -+ rela.r_offset = (h->root.u.def.value -+ + h->root.u.def.section->output_section->vma -+ + h->root.u.def.section->output_offset); -+ rela.r_info = ELF64_R_INFO (h->dynindx, R_MICROBLAZE_COPY); -+ rela.r_addend = 0; -+ loc = s->contents + s->reloc_count++ * sizeof (Elf64_External_Rela); -+ bfd_elf64_swap_reloca_out (output_bfd, &rela, loc); -+ } -+ -+ /* Mark some specially defined symbols as absolute. */ -+ if (h == htab->elf.hdynamic -+ || h == htab->elf.hgot -+ || h == htab->elf.hplt) -+ sym->st_shndx = SHN_ABS; -+ -+ return TRUE; -+} -+ -+ -+/* Finish up the dynamic sections. */ -+ -+static bfd_boolean -+microblaze_elf_finish_dynamic_sections (bfd *output_bfd, -+ struct bfd_link_info *info) -+{ -+ bfd *dynobj; -+ asection *sdyn, *sgot; -+ struct elf64_mb_link_hash_table *htab; -+ -+ htab = elf64_mb_hash_table (info); -+ if (htab == NULL) -+ return FALSE; -+ -+ dynobj = htab->elf.dynobj; -+ -+ sdyn = bfd_get_linker_section (dynobj, ".dynamic"); -+ -+ if (htab->elf.dynamic_sections_created) -+ { -+ asection *splt; -+ Elf64_External_Dyn *dyncon, *dynconend; -+ -+ splt = bfd_get_linker_section (dynobj, ".plt"); -+ BFD_ASSERT (splt != NULL && sdyn != NULL); -+ -+ dyncon = (Elf64_External_Dyn *) sdyn->contents; -+ dynconend = (Elf64_External_Dyn *) (sdyn->contents + sdyn->size); -+ for (; dyncon < dynconend; dyncon++) -+ { -+ Elf_Internal_Dyn dyn; -+ const char *name; -+ bfd_boolean size; -+ -+ bfd_elf64_swap_dyn_in (dynobj, dyncon, &dyn); -+ -+ switch (dyn.d_tag) -+ { -+ case DT_PLTGOT: name = ".got.plt"; size = FALSE; break; -+ case DT_PLTRELSZ: name = ".rela.plt"; size = TRUE; break; -+ case DT_JMPREL: name = ".rela.plt"; size = FALSE; break; -+ case DT_RELA: name = ".rela.dyn"; size = FALSE; break; -+ case DT_RELASZ: name = ".rela.dyn"; size = TRUE; break; -+ default: name = NULL; size = FALSE; break; -+ } -+ -+ if (name != NULL) -+ { -+ asection *s; -+ -+ s = bfd_get_section_by_name (output_bfd, name); -+ if (s == NULL) -+ dyn.d_un.d_val = 0; -+ else -+ { -+ if (! size) -+ dyn.d_un.d_ptr = s->vma; -+ else -+ dyn.d_un.d_val = s->size; -+ } -+ bfd_elf64_swap_dyn_out (output_bfd, &dyn, dyncon); -+ } -+ } -+ -+ /* Clear the first entry in the procedure linkage table, -+ and put a nop in the last four bytes. */ -+ if (splt->size > 0) -+ { -+ memset (splt->contents, 0, PLT_ENTRY_SIZE); -+ bfd_put_32 (output_bfd, (bfd_vma) 0x80000000 /* nop. */, -+ splt->contents + splt->size - 4); -+ } -+ -+ elf_section_data (splt->output_section)->this_hdr.sh_entsize = 4; -+ } -+ -+ /* Set the first entry in the global offset table to the address of -+ the dynamic section. */ -+ sgot = bfd_get_linker_section (dynobj, ".got.plt"); -+ if (sgot && sgot->size > 0) -+ { -+ if (sdyn == NULL) -+ bfd_put_32 (output_bfd, (bfd_vma) 0, sgot->contents); -+ else -+ bfd_put_32 (output_bfd, -+ sdyn->output_section->vma + sdyn->output_offset, -+ sgot->contents); -+ elf_section_data (sgot->output_section)->this_hdr.sh_entsize = 4; -+ } -+ -+ if (htab->sgot && htab->sgot->size > 0) -+ elf_section_data (htab->sgot->output_section)->this_hdr.sh_entsize = 4; -+ -+ return TRUE; -+} -+ -+/* Hook called by the linker routine which adds symbols from an object -+ file. We use it to put .comm items in .sbss, and not .bss. */ -+ -+static bfd_boolean -+microblaze_elf_add_symbol_hook (bfd *abfd, -+ struct bfd_link_info *info, -+ Elf_Internal_Sym *sym, -+ const char **namep ATTRIBUTE_UNUSED, -+ flagword *flagsp ATTRIBUTE_UNUSED, -+ asection **secp, -+ bfd_vma *valp) -+{ -+ if (sym->st_shndx == SHN_COMMON -+ && !bfd_link_relocatable (info) -+ && sym->st_size <= elf_gp_size (abfd)) -+ { -+ /* Common symbols less than or equal to -G nn bytes are automatically -+ put into .sbss. */ -+ *secp = bfd_make_section_old_way (abfd, ".sbss"); -+ if (*secp == NULL -+ || ! bfd_set_section_flags (abfd, *secp, SEC_IS_COMMON)) -+ return FALSE; -+ -+ *valp = sym->st_size; -+ } -+ -+ return TRUE; -+} -+ -+#define TARGET_LITTLE_SYM microblaze_elf64_le_vec -+#define TARGET_LITTLE_NAME "elf64-microblazeel" -+ -+#define TARGET_BIG_SYM microblaze_elf64_vec -+#define TARGET_BIG_NAME "elf64-microblaze" -+ -+#define ELF_ARCH bfd_arch_microblaze -+#define ELF_TARGET_ID MICROBLAZE_ELF_DATA -+#define ELF_MACHINE_CODE EM_MICROBLAZE -+#define ELF_MACHINE_ALT1 EM_MICROBLAZE_OLD -+#define ELF_MAXPAGESIZE 0x1000 -+#define elf_info_to_howto microblaze_elf_info_to_howto -+#define elf_info_to_howto_rel NULL -+ -+#define bfd_elf64_bfd_reloc_type_lookup microblaze_elf_reloc_type_lookup -+#define bfd_elf64_bfd_is_local_label_name microblaze_elf_is_local_label_name -+#define elf_backend_relocate_section microblaze_elf_relocate_section -+#define bfd_elf64_bfd_relax_section microblaze_elf_relax_section -+#define bfd_elf64_bfd_merge_private_bfd_data microblaze_elf_merge_private_bfd_data -+#define bfd_elf64_bfd_reloc_name_lookup microblaze_elf_reloc_name_lookup -+ -+#define elf_backend_gc_mark_hook microblaze_elf_gc_mark_hook -+#define elf_backend_gc_sweep_hook microblaze_elf_gc_sweep_hook -+#define elf_backend_check_relocs microblaze_elf_check_relocs -+#define elf_backend_copy_indirect_symbol microblaze_elf_copy_indirect_symbol -+#define bfd_elf64_bfd_link_hash_table_create microblaze_elf_link_hash_table_create -+#define elf_backend_can_gc_sections 1 -+#define elf_backend_can_refcount 1 -+#define elf_backend_want_got_plt 1 -+#define elf_backend_plt_readonly 1 -+#define elf_backend_got_header_size 12 -+#define elf_backend_rela_normal 1 -+ -+#define elf_backend_adjust_dynamic_symbol microblaze_elf_adjust_dynamic_symbol -+#define elf_backend_create_dynamic_sections microblaze_elf_create_dynamic_sections -+#define elf_backend_finish_dynamic_sections microblaze_elf_finish_dynamic_sections -+#define elf_backend_finish_dynamic_symbol microblaze_elf_finish_dynamic_symbol -+#define elf_backend_size_dynamic_sections microblaze_elf_size_dynamic_sections -+#define elf_backend_add_symbol_hook microblaze_elf_add_symbol_hook -+ -+#include "elf64-target.h" -diff --git a/bfd/targets.c b/bfd/targets.c -index 158168c..ef567a3 100644 ---- a/bfd/targets.c -+++ b/bfd/targets.c -@@ -706,6 +706,8 @@ extern const bfd_target mep_elf32_le_vec; - extern const bfd_target metag_elf32_vec; - extern const bfd_target microblaze_elf32_vec; - extern const bfd_target microblaze_elf32_le_vec; -+extern const bfd_target microblaze_elf64_vec; -+extern const bfd_target microblaze_elf64_le_vec; - extern const bfd_target mips_ecoff_be_vec; - extern const bfd_target mips_ecoff_le_vec; - extern const bfd_target mips_ecoff_bele_vec; -@@ -1073,6 +1075,10 @@ static const bfd_target * const _bfd_target_vector[] = - - &metag_elf32_vec, - -+#ifdef BFD64 -+ µblaze_elf64_vec, -+ µblaze_elf64_le_vec, -+#endif - µblaze_elf32_vec, - - &mips_ecoff_be_vec, -diff --git a/gas/config/tc-microblaze.c b/gas/config/tc-microblaze.c -index 16b10d0..c794347 100644 ---- a/gas/config/tc-microblaze.c -+++ b/gas/config/tc-microblaze.c -@@ -35,10 +35,13 @@ - #define streq(a,b) (strcmp (a, b) == 0) - #endif - -+static int microblaze_arch_size = 0; -+ - #define OPTION_EB (OPTION_MD_BASE + 0) - #define OPTION_EL (OPTION_MD_BASE + 1) - #define OPTION_LITTLE (OPTION_MD_BASE + 2) - #define OPTION_BIG (OPTION_MD_BASE + 3) -+#define OPTION_M64 (OPTION_MD_BASE + 4) - - void microblaze_generate_symbol (char *sym); - static bfd_boolean check_spl_reg (unsigned *); -@@ -773,6 +776,74 @@ parse_imm (char * s, expressionS * e, offsetT min, offsetT max) - return new_pointer; - } - -+ static char * -+parse_imml (char * s, expressionS * e, long min, long max) -+{ -+ char *new_pointer; -+ char *atp; -+ int itype, ilen; -+ -+ ilen = 0; -+ -+ /* Find the start of "@GOT" or "@PLT" suffix (if any) */ -+ for (atp = s; *atp != '@'; atp++) -+ if (is_end_of_line[(unsigned char) *atp]) -+ break; -+ -+ if (*atp == '@') -+ { -+ itype = match_imm (atp + 1, &ilen); -+ if (itype != 0) -+ { -+ *atp = 0; -+ e->X_md = itype; -+ } -+ else -+ { -+ atp = NULL; -+ e->X_md = 0; -+ ilen = 0; -+ } -+ *atp = 0; -+ } -+ else -+ { -+ atp = NULL; -+ e->X_md = 0; -+ } -+ -+ if (atp && !GOT_symbol) -+ { -+ GOT_symbol = symbol_find_or_make (GOT_SYMBOL_NAME); -+ } -+ -+ new_pointer = parse_exp (s, e); -+ -+ if (!GOT_symbol && ! strncmp (s, GOT_SYMBOL_NAME, 20)) -+ { -+ GOT_symbol = symbol_find_or_make (GOT_SYMBOL_NAME); -+ } -+ -+ if (e->X_op == O_absent) -+ ; /* An error message has already been emitted. */ -+ else if ((e->X_op != O_constant && e->X_op != O_symbol) ) -+ as_fatal (_("operand must be a constant or a label")); -+ else if ((e->X_op == O_constant) && ((long) e->X_add_number < min -+ || (long) e->X_add_number > max)) -+ { -+ as_fatal (_("operand must be absolute in range %ld..%ld, not %ld"), -+ min, max, (long) e->X_add_number); -+ } -+ -+ if (atp) -+ { -+ *atp = '@'; /* restore back (needed?) */ -+ if (new_pointer >= atp) -+ new_pointer += ilen + 1; /* sizeof (imm_suffix) + 1 for '@' */ -+ } -+ return new_pointer; -+} -+ - static char * - check_got (int * got_type, int * got_len) - { -@@ -920,6 +991,7 @@ md_assemble (char * str) - unsigned int immed, immed2, temp; - expressionS exp; - char name[20]; -+ long immedl; - - /* Drop leading whitespace. */ - while (ISSPACE (* str)) -@@ -1129,7 +1201,7 @@ md_assemble (char * str) - } - break; - -- case INST_TYPE_RD_R1_IMM5: -+ case INST_TYPE_RD_R1_IMMS: - if (strcmp (op_end, "")) - op_end = parse_reg (op_end + 1, ®1); /* Get rd. */ - else -@@ -1163,16 +1235,22 @@ md_assemble (char * str) - immed = exp.X_add_number; - } - -- if (immed != (immed % 32)) -+ if ((immed != (immed % 32)) && -+ (opcode->instr == bslli || opcode->instr == bsrai || opcode->instr == bsrli)) - { - as_warn (_("Shift value > 32. using <value %% 32>")); - immed = immed % 32; - } -+ else if (immed != (immed % 64)) -+ { -+ as_warn (_("Shift value > 64. using <value %% 64>")); -+ immed = immed % 64; -+ } - inst |= (reg1 << RD_LOW) & RD_MASK; - inst |= (reg2 << RA_LOW) & RA_MASK; -- inst |= (immed << IMM_LOW) & IMM5_MASK; -+ inst |= (immed << IMM_LOW) & IMM6_MASK; - break; -- case INST_TYPE_RD_R1_IMM5_IMM5: -+ case INST_TYPE_RD_R1_IMMW_IMMS: - if (strcmp (op_end, "")) - op_end = parse_reg (op_end + 1, ®1); /* Get rd. */ - else -@@ -1196,7 +1274,7 @@ md_assemble (char * str) - - /* Width immediate value. */ - if (strcmp (op_end, "")) -- op_end = parse_imm (op_end + 1, &exp, MIN_IMM_WIDTH, MAX_IMM_WIDTH); -+ op_end = parse_imm (op_end + 1, &exp, MIN_IMM, MAX_IMM); - else - as_fatal (_("Error in statement syntax")); - if (exp.X_op != O_constant) -@@ -1208,6 +1286,8 @@ md_assemble (char * str) - immed = exp.X_add_number; - if (opcode->instr == bsefi && immed > 31) - as_fatal (_("Width value must be less than 32")); -+ else if (opcode->instr == bslefi && immed > 63) -+ as_fatal (_("Width value must be less than 64")); - - /* Shift immediate value. */ - if (strcmp (op_end, "")) -@@ -1215,32 +1295,40 @@ md_assemble (char * str) - else - as_fatal (_("Error in statement syntax")); - if (exp.X_op != O_constant) -- { -+ { - as_warn (_("Symbol used as immediate shift value for bit field instruction")); - immed2 = 0; - } - else -- { -+ { - output = frag_more (isize); - immed2 = exp.X_add_number; -- } -- if (immed2 != (immed2 % 32)) -- { -- as_warn (_("Shift value greater than 32. using <value %% 32>")); -+ } -+ if ((immed2 != (immed2 % 32)) && (opcode->instr == bsefi || opcode->instr == bsifi)) -+ { -+ -+ as_warn (_("Shift value greater than 32. using <value %% 32>")); - immed2 = immed2 % 32; - } -+ else if (immed2 != (immed2 % 64)) -+ { -+ as_warn (_("Shift value greater than 64. using <value %% 64>")); -+ immed2 = immed2 % 64; -+ } - - /* Check combined value. */ -- if (immed + immed2 > 32) -+ if ((immed + immed2 > 32) && (opcode->instr == bsefi || opcode->instr == bsifi)) - as_fatal (_("Width value + shift value must not be greater than 32")); - -+ else if (immed + immed2 > 64) -+ as_fatal (_("Width value + shift value must not be greater than 64")); - inst |= (reg1 << RD_LOW) & RD_MASK; - inst |= (reg2 << RA_LOW) & RA_MASK; -- if (opcode->instr == bsefi) -- inst |= (immed & IMM5_MASK) << IMM_WIDTH_LOW; /* bsefi */ -+ if (opcode->instr == bsefi || opcode->instr == bslefi) -+ inst |= (immed & IMM6_MASK) << IMM_WIDTH_LOW; /* bsefi or bslefi */ - else -- inst |= ((immed + immed2 - 1) & IMM5_MASK) << IMM_WIDTH_LOW; /* bsifi */ -- inst |= (immed2 << IMM_LOW) & IMM5_MASK; -+ inst |= ((immed + immed2 - 1) & IMM6_MASK) << IMM_WIDTH_LOW; /* bsifi or bslifi */ -+ inst |= (immed2 << IMM_LOW) & IMM6_MASK; - break; - case INST_TYPE_R1_R2: - if (strcmp (op_end, "")) -@@ -1808,6 +1896,142 @@ md_assemble (char * str) - } - inst |= (immed << IMM_MBAR); - break; -+ /* For 64-bit instructions */ -+ case INST_TYPE_RD_R1_IMML: -+ if (strcmp (op_end, "")) -+ op_end = parse_reg (op_end + 1, ®1); /* Get rd. */ -+ else -+ { -+ as_fatal (_("Error in statement syntax")); -+ reg1 = 0; -+ } -+ if (strcmp (op_end, "")) -+ op_end = parse_reg (op_end + 1, ®2); /* Get r1. */ -+ else -+ { -+ as_fatal (_("Error in statement syntax")); -+ reg2 = 0; -+ } -+ if (strcmp (op_end, "")) -+ op_end = parse_imml (op_end + 1, & exp, MIN_IMML, MAX_IMML); -+ else -+ as_fatal (_("Error in statement syntax")); -+ -+ /* Check for spl registers. */ -+ if (check_spl_reg (& reg1)) -+ as_fatal (_("Cannot use special register with this instruction")); -+ if (check_spl_reg (& reg2)) -+ as_fatal (_("Cannot use special register with this instruction")); -+ -+ if (exp.X_op != O_constant) -+ { -+ char *opc = NULL; -+ relax_substateT subtype; -+ -+ if (exp.X_md != 0) -+ subtype = get_imm_otype(exp.X_md); -+ else -+ subtype = opcode->inst_offset_type; -+ -+ output = frag_var (rs_machine_dependent, -+ isize * 2, /* maxm of 2 words. */ -+ isize * 2, /* minm of 2 words. */ -+ subtype, /* PC-relative or not. */ -+ exp.X_add_symbol, -+ exp.X_add_number, -+ opc); -+ immedl = 0L; -+ } -+ else -+ { -+ output = frag_more (isize); -+ immedl = exp.X_add_number; -+ -+ opcode1 = (struct op_code_struct *) hash_find (opcode_hash_control, "imml"); -+ if (opcode1 == NULL) -+ { -+ as_bad (_("unknown opcode \"%s\""), "imml"); -+ return; -+ } -+ -+ inst1 = opcode1->bit_sequence; -+ inst1 |= ((immedl & 0xFFFFFFFFFFFF0000L) >> 16) & IMML_MASK; -+ output[0] = INST_BYTE0 (inst1); -+ output[1] = INST_BYTE1 (inst1); -+ output[2] = INST_BYTE2 (inst1); -+ output[3] = INST_BYTE3 (inst1); -+ output = frag_more (isize); -+ } -+ -+ inst |= (reg1 << RD_LOW) & RD_MASK; -+ inst |= (reg2 << RA_LOW) & RA_MASK; -+ inst |= (immedl << IMM_LOW) & IMM_MASK; -+ break; -+ -+ case INST_TYPE_R1_IMML: -+ if (strcmp (op_end, "")) -+ op_end = parse_reg (op_end + 1, ®1); /* Get r1. */ -+ else -+ { -+ as_fatal (_("Error in statement syntax")); -+ reg1 = 0; -+ } -+ if (strcmp (op_end, "")) -+ op_end = parse_imml (op_end + 1, & exp, MIN_IMM, MAX_IMM); -+ else -+ as_fatal (_("Error in statement syntax")); -+ -+ /* Check for spl registers. */ -+ if (check_spl_reg (®1)) -+ as_fatal (_("Cannot use special register with this instruction")); -+ -+ if (exp.X_op != O_constant) -+ { -+ char *opc = NULL; -+ relax_substateT subtype; -+ -+ if (exp.X_md != 0) -+ subtype = get_imm_otype(exp.X_md); -+ else -+ subtype = opcode->inst_offset_type; -+ -+ output = frag_var (rs_machine_dependent, -+ isize * 2, /* maxm of 2 words. */ -+ isize * 2, /* minm of 2 words. */ -+ subtype, /* PC-relative or not. */ -+ exp.X_add_symbol, -+ exp.X_add_number, -+ opc); -+ immedl = 0L; -+ } -+ else -+ { -+ output = frag_more (isize); -+ immedl = exp.X_add_number; -+ -+ opcode1 = (struct op_code_struct *) hash_find (opcode_hash_control, "imml"); -+ if (opcode1 == NULL) -+ { -+ as_bad (_("unknown opcode \"%s\""), "imml"); -+ return; -+ } -+ -+ inst1 = opcode1->bit_sequence; -+ inst1 |= ((immedl & 0xFFFFFFFFFFFF0000L) >> 16) & IMML_MASK; -+ output[0] = INST_BYTE0 (inst1); -+ output[1] = INST_BYTE1 (inst1); -+ output[2] = INST_BYTE2 (inst1); -+ output[3] = INST_BYTE3 (inst1); -+ output = frag_more (isize); -+ } -+ -+ inst |= (reg1 << RA_LOW) & RA_MASK; -+ inst |= (immedl << IMM_LOW) & IMM_MASK; -+ break; -+ -+ case INST_TYPE_IMML: -+ as_fatal (_("An IMML instruction should not be present in the .s file")); -+ break; - - default: - as_fatal (_("unimplemented opcode \"%s\""), name); -@@ -1918,6 +2142,7 @@ struct option md_longopts[] = - {"EL", no_argument, NULL, OPTION_EL}, - {"mlittle-endian", no_argument, NULL, OPTION_LITTLE}, - {"mbig-endian", no_argument, NULL, OPTION_BIG}, -+ {"m64", no_argument, NULL, OPTION_M64}, - { NULL, no_argument, NULL, 0} - }; - -@@ -2569,6 +2794,18 @@ tc_gen_reloc (asection * section ATTRIBUTE_UNUSED, fixS * fixp) - return rel; - } - -+/* Called by TARGET_FORMAT. */ -+const char * -+microblaze_target_format (void) -+{ -+ -+ if (microblaze_arch_size == 64) -+ return "elf64-microblazeel"; -+ else -+ return target_big_endian ? "elf32-microblaze" : "elf32-microblazeel"; -+} -+ -+ - int - md_parse_option (int c, const char * arg ATTRIBUTE_UNUSED) - { -@@ -2582,6 +2819,10 @@ md_parse_option (int c, const char * arg ATTRIBUTE_UNUSED) - case OPTION_LITTLE: - target_big_endian = 0; - break; -+ case OPTION_M64: -+ //if (arg != NULL && strcmp (arg, "64") == 0) -+ microblaze_arch_size = 64; -+ break; - default: - return 0; - } -@@ -2597,6 +2838,7 @@ md_show_usage (FILE * stream ATTRIBUTE_UNUSED) - fprintf (stream, _(" MicroBlaze specific assembler options:\n")); - fprintf (stream, " -%-23s%s\n", "mbig-endian", N_("assemble for a big endian cpu")); - fprintf (stream, " -%-23s%s\n", "mlittle-endian", N_("assemble for a little endian cpu")); -+ fprintf (stream, " -%-23s%s\n", "m64", N_("generate 64-bit elf")); - } - - -diff --git a/gas/config/tc-microblaze.h b/gas/config/tc-microblaze.h -index ca9dbb8..9d38d2c 100644 ---- a/gas/config/tc-microblaze.h -+++ b/gas/config/tc-microblaze.h -@@ -78,7 +78,9 @@ extern const struct relax_type md_relax_table[]; - - #ifdef OBJ_ELF - --#define TARGET_FORMAT (target_big_endian ? "elf32-microblaze" : "elf32-microblazeel") -+#define TARGET_FORMAT microblaze_target_format() -+extern const char *microblaze_target_format (void); -+//#define TARGET_FORMAT (target_big_endian ? "elf32-microblaze" : "elf32-microblazeel") - - #define ELF_TC_SPECIAL_SECTIONS \ - { ".sdata", SHT_PROGBITS, SHF_ALLOC + SHF_WRITE }, \ -diff --git a/include/elf/common.h b/include/elf/common.h -index 996acf9..2f1e5be 100644 ---- a/include/elf/common.h -+++ b/include/elf/common.h -@@ -339,6 +339,7 @@ - #define EM_RISCV 243 /* RISC-V */ - #define EM_LANAI 244 /* Lanai 32-bit processor. */ - #define EM_BPF 247 /* Linux BPF – in-kernel virtual machine. */ -+#define EM_MB_64 248 /* Xilinx MicroBlaze 32-bit RISC soft processor core */ - #define EM_NFP 250 /* Netronome Flow Processor. */ - #define EM_CSKY 252 /* C-SKY processor family. */ - -diff --git a/ld/Makefile.am b/ld/Makefile.am -index d7faf19..f7b3b97 100644 ---- a/ld/Makefile.am -+++ b/ld/Makefile.am -@@ -422,6 +422,8 @@ ALL_64_EMULATION_SOURCES = \ - eelf32ltsmipn32.c \ - eelf32ltsmipn32_fbsd.c \ - eelf32mipswindiss.c \ -+ eelf64microblazeel.c \ -+ eelf64microblaze.c \ - eelf64_aix.c \ - eelf64_ia64.c \ - eelf64_ia64_fbsd.c \ -@@ -1702,6 +1704,12 @@ eelf32_x86_64_nacl.c: $(srcdir)/emulparams/elf32_x86_64_nacl.sh \ - $(srcdir)/emulparams/elf_nacl.sh \ - $(ELF_X86_DEPS) $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS} - -+eelf64microblazeel.c: $(srcdir)/emulparams/elf64microblazeel.sh \ -+ $(ELF_DEPS) $(srcdir)/scripttempl/elfmicroblaze.sc ${GEN_DEPENDS} -+ -+eelf64microblaze.c: $(srcdir)/emulparams/elf64microblaze.sh \ -+ $(ELF_DEPS) $(srcdir)/scripttempl/elfmicroblaze.sc ${GEN_DEPENDS} -+ - eelf64_aix.c: $(srcdir)/emulparams/elf64_aix.sh \ - $(ELF_DEPS) $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS} - -diff --git a/ld/Makefile.in b/ld/Makefile.in -index 8b14f52..ffc9a3e 100644 ---- a/ld/Makefile.in -+++ b/ld/Makefile.in -@@ -907,6 +907,8 @@ ALL_64_EMULATION_SOURCES = \ - eelf32ltsmipn32.c \ - eelf32ltsmipn32_fbsd.c \ - eelf32mipswindiss.c \ -+ eelf64microblazeel.c \ -+ eelf64microblaze.c \ - eelf64_aix.c \ - eelf64_ia64.c \ - eelf64_ia64_fbsd.c \ -@@ -1355,6 +1357,8 @@ distclean-compile: - @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eelf32xc16xs.Po@am__quote@ - @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eelf32xstormy16.Po@am__quote@ - @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eelf32xtensa.Po@am__quote@ -+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eelf64microblazeel.Po@am__quote@ -+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eelf64microblaze.Po@am__quote@ - @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eelf64_aix.Po@am__quote@ - @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eelf64_ia64.Po@am__quote@ - @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eelf64_ia64_fbsd.Po@am__quote@ -@@ -3306,6 +3310,12 @@ eelf32_x86_64_nacl.c: $(srcdir)/emulparams/elf32_x86_64_nacl.sh \ - $(srcdir)/emulparams/elf_nacl.sh \ - $(ELF_X86_DEPS) $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS} - -+eelf64microblazeel.c: $(srcdir)/emulparams/elf64microblazeel.sh \ -+ $(ELF_DEPS) $(srcdir)/scripttempl/elfmicroblaze.sc ${GEN_DEPENDS} -+ -+eelf64microblaze.c: $(srcdir)/emulparams/elf64microblaze.sh \ -+ $(ELF_DEPS) $(srcdir)/scripttempl/elfmicroblaze.sc ${GEN_DEPENDS} -+ - eelf64_aix.c: $(srcdir)/emulparams/elf64_aix.sh \ - $(ELF_DEPS) $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS} - -diff --git a/ld/configure.tgt b/ld/configure.tgt -index 1e37d74..42f106d 100644 ---- a/ld/configure.tgt -+++ b/ld/configure.tgt -@@ -424,6 +424,9 @@ microblaze*-linux*) targ_emul="elf32mb_linux" - microblazeel*) targ_emul=elf32microblazeel - targ_extra_emuls=elf32microblaze - ;; -+microblazeel64*) targ_emul=elf64microblazeel -+ targ_extra_emuls=elf64microblaze -+ ;; - microblaze*) targ_emul=elf32microblaze - targ_extra_emuls=elf32microblazeel - ;; -diff --git a/ld/emulparams/elf64microblaze.sh b/ld/emulparams/elf64microblaze.sh -new file mode 100644 -index 0000000..9c7b0eb ---- /dev/null -+++ b/ld/emulparams/elf64microblaze.sh -@@ -0,0 +1,23 @@ -+SCRIPT_NAME=elfmicroblaze -+OUTPUT_FORMAT="elf64-microblazeel" -+#BIG_OUTPUT_FORMAT="elf64-microblaze" -+LITTLE_OUTPUT_FORMAT="elf64-microblazeel" -+#TEXT_START_ADDR=0 -+NONPAGED_TEXT_START_ADDR=0x28 -+ALIGNMENT=4 -+MAXPAGESIZE=4 -+ARCH=microblaze -+EMBEDDED=yes -+ -+NOP=0x80000000 -+ -+# Hmmm, there's got to be a better way. This sets the stack to the -+# top of the simulator memory (2^19 bytes). -+#PAGE_SIZE=0x1000 -+#DATA_ADDR=0x10000 -+#OTHER_RELOCATING_SECTIONS='.stack 0x7000 : { _stack = .; *(.stack) }' -+#$@{RELOCATING+ PROVIDE (__stack = 0x7000);@} -+#OTHER_RELOCATING_SECTIONS='PROVIDE (_stack = _end + 0x1000);' -+ -+TEMPLATE_NAME=elf32 -+#GENERATE_SHLIB_SCRIPT=yes -diff --git a/ld/emulparams/elf64microblazeel.sh b/ld/emulparams/elf64microblazeel.sh -new file mode 100644 -index 0000000..9c7b0eb ---- /dev/null -+++ b/ld/emulparams/elf64microblazeel.sh -@@ -0,0 +1,23 @@ -+SCRIPT_NAME=elfmicroblaze -+OUTPUT_FORMAT="elf64-microblazeel" -+#BIG_OUTPUT_FORMAT="elf64-microblaze" -+LITTLE_OUTPUT_FORMAT="elf64-microblazeel" -+#TEXT_START_ADDR=0 -+NONPAGED_TEXT_START_ADDR=0x28 -+ALIGNMENT=4 -+MAXPAGESIZE=4 -+ARCH=microblaze -+EMBEDDED=yes -+ -+NOP=0x80000000 -+ -+# Hmmm, there's got to be a better way. This sets the stack to the -+# top of the simulator memory (2^19 bytes). -+#PAGE_SIZE=0x1000 -+#DATA_ADDR=0x10000 -+#OTHER_RELOCATING_SECTIONS='.stack 0x7000 : { _stack = .; *(.stack) }' -+#$@{RELOCATING+ PROVIDE (__stack = 0x7000);@} -+#OTHER_RELOCATING_SECTIONS='PROVIDE (_stack = _end + 0x1000);' -+ -+TEMPLATE_NAME=elf32 -+#GENERATE_SHLIB_SCRIPT=yes -diff --git a/opcodes/microblaze-dis.c b/opcodes/microblaze-dis.c -index f8aaf27..20ea6a8 100644 ---- a/opcodes/microblaze-dis.c -+++ b/opcodes/microblaze-dis.c -@@ -33,6 +33,7 @@ - #define get_field_r1(instr) get_field (instr, RA_MASK, RA_LOW) - #define get_field_r2(instr) get_field (instr, RB_MASK, RB_LOW) - #define get_int_field_imm(instr) ((instr & IMM_MASK) >> IMM_LOW) -+#define get_int_field_imml(instr) ((instr & IMML_MASK) >> IMM_LOW) - #define get_int_field_r1(instr) ((instr & RA_MASK) >> RA_LOW) - - -@@ -56,11 +57,20 @@ get_field_imm (long instr) - } - - static char * --get_field_imm5 (long instr) -+get_field_imml (long instr) - { - char tmpstr[25]; - -- sprintf (tmpstr, "%d", (short)((instr & IMM5_MASK) >> IMM_LOW)); -+ sprintf (tmpstr, "%d", (short)((instr & IMML_MASK) >> IMM_LOW)); -+ return (strdup (tmpstr)); -+} -+ -+static char * -+get_field_imms (long instr) -+{ -+ char tmpstr[25]; -+ -+ sprintf (tmpstr, "%d", (short)((instr & IMM6_MASK) >> IMM_LOW)); - return (strdup (tmpstr)); - } - -@@ -74,14 +84,14 @@ get_field_imm5_mbar (long instr) - } - - static char * --get_field_imm5width (long instr) -+get_field_immw (long instr) - { - char tmpstr[25]; - - if (instr & 0x00004000) -- sprintf (tmpstr, "%d", (short)(((instr & IMM5_WIDTH_MASK) >> IMM_WIDTH_LOW))); /* bsefi */ -+ sprintf (tmpstr, "%d", (short)(((instr & IMM6_WIDTH_MASK) >> IMM_WIDTH_LOW))); /* bsefi */ - else -- sprintf (tmpstr, "%d", (short)(((instr & IMM5_WIDTH_MASK) >> IMM_WIDTH_LOW) - ((instr & IMM5_MASK) >> IMM_LOW) + 1)); /* bsifi */ -+ sprintf (tmpstr, "%d", (short)(((instr & IMM6_WIDTH_MASK) >> IMM_WIDTH_LOW) - ((instr & IMM6_MASK) >> IMM_LOW) + 1)); /* bsifi */ - return (strdup (tmpstr)); - } - -@@ -286,9 +296,13 @@ print_insn_microblaze (bfd_vma memaddr, struct disassemble_info * info) - } - } - break; -- case INST_TYPE_RD_R1_IMM5: -+ case INST_TYPE_RD_R1_IMML: -+ print_func (stream, "\t%s, %s, %s", get_field_rd (inst), -+ get_field_r1(inst), get_field_imm (inst)); -+ /* TODO: Also print symbol */ -+ case INST_TYPE_RD_R1_IMMS: - print_func (stream, "\t%s, %s, %s", get_field_rd (inst), -- get_field_r1(inst), get_field_imm5 (inst)); -+ get_field_r1(inst), get_field_imms (inst)); - break; - case INST_TYPE_RD_RFSL: - print_func (stream, "\t%s, %s", get_field_rd (inst), get_field_rfsl (inst)); -@@ -386,6 +400,10 @@ print_insn_microblaze (bfd_vma memaddr, struct disassemble_info * info) - } - } - break; -+ case INST_TYPE_IMML: -+ print_func (stream, "\t%s", get_field_imml (inst)); -+ /* TODO: Also print symbol */ -+ break; - case INST_TYPE_RD_R2: - print_func (stream, "\t%s, %s", get_field_rd (inst), get_field_r2 (inst)); - break; -@@ -409,9 +427,10 @@ print_insn_microblaze (bfd_vma memaddr, struct disassemble_info * info) - case INST_TYPE_NONE: - break; - /* For bit field insns. */ -- case INST_TYPE_RD_R1_IMM5_IMM5: -- print_func (stream, "\t%s, %s, %s, %s", get_field_rd (inst),get_field_r1(inst),get_field_imm5width (inst), get_field_imm5 (inst)); -- break; -+ case INST_TYPE_RD_R1_IMMW_IMMS: -+ print_func (stream, "\t%s, %s, %s, %s", get_field_rd (inst), get_field_r1(inst), -+ get_field_immw (inst), get_field_imms (inst)); -+ break; - /* For tuqula instruction */ - case INST_TYPE_RD: - print_func (stream, "\t%s", get_field_rd (inst)); -diff --git a/opcodes/microblaze-opc.h b/opcodes/microblaze-opc.h -index ce8ac35..985834b 100644 ---- a/opcodes/microblaze-opc.h -+++ b/opcodes/microblaze-opc.h -@@ -40,7 +40,7 @@ - #define INST_TYPE_RD_SPECIAL 11 - #define INST_TYPE_R1 12 - /* New instn type for barrel shift imms. */ --#define INST_TYPE_RD_R1_IMM5 13 -+#define INST_TYPE_RD_R1_IMMS 13 - #define INST_TYPE_RD_RFSL 14 - #define INST_TYPE_R1_RFSL 15 - -@@ -60,7 +60,13 @@ - #define INST_TYPE_IMM5 20 - - /* For bsefi and bsifi */ --#define INST_TYPE_RD_R1_IMM5_IMM5 21 -+#define INST_TYPE_RD_R1_IMMW_IMMS 21 -+ -+/* For 64-bit instructions */ -+#define INST_TYPE_IMML 22 -+#define INST_TYPE_RD_R1_IMML 23 -+#define INST_TYPE_R1_IMML 24 -+#define INST_TYPE_RD_R1_IMMW_IMMS 21 - - #define INST_TYPE_NONE 25 - -@@ -91,13 +97,14 @@ - #define OPCODE_MASK_H24 0xFC1F07FF /* High 6, bits 20-16 and low 11 bits. */ - #define OPCODE_MASK_H124 0xFFFF07FF /* High 16, and low 11 bits. */ - #define OPCODE_MASK_H1234 0xFFFFFFFF /* All 32 bits. */ --#define OPCODE_MASK_H3 0xFC000600 /* High 6 bits and bits 21, 22. */ --#define OPCODE_MASK_H3B 0xFC00C600 /* High 6 bits and bits 16, 17, 21, 22. */ -+#define OPCODE_MASK_H3 0xFC000700 /* High 6 bits and bits 21, 22, 23. */ -+#define OPCODE_MASK_H3B 0xFC00E600 /* High 6 bits and bits 16, 17, 18, 21, 22. */ - #define OPCODE_MASK_H32 0xFC00FC00 /* High 6 bits and bit 16-21. */ --#define OPCODE_MASK_H32B 0xFC00C000 /* High 6 bits and bit 16, 17. */ -+#define OPCODE_MASK_H32B 0xFC00E000 /* High 6 bits and bit 16, 17, 18. */ - #define OPCODE_MASK_H34B 0xFC0000FF /* High 6 bits and low 8 bits. */ - #define OPCODE_MASK_H35B 0xFC0004FF /* High 6 bits and low 9 bits. */ - #define OPCODE_MASK_H34C 0xFC0007E0 /* High 6 bits and bits 21-26. */ -+#define OPCODE_MASK_H8 0xFF000000 /* High 8 bits only. */ - - /* New Mask for msrset, msrclr insns. */ - #define OPCODE_MASK_H23N 0xFC1F8000 /* High 6 and bits 11 - 16. */ -@@ -107,7 +114,7 @@ - #define DELAY_SLOT 1 - #define NO_DELAY_SLOT 0 - --#define MAX_OPCODES 301 -+#define MAX_OPCODES 412 - - struct op_code_struct - { -@@ -125,6 +132,7 @@ struct op_code_struct - /* More info about output format here. */ - } opcodes[MAX_OPCODES] = - { -+ /* 32-bit instructions */ - {"add", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x00000000, OPCODE_MASK_H4, add, arithmetic_inst }, - {"rsub", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x04000000, OPCODE_MASK_H4, rsub, arithmetic_inst }, - {"addc", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x08000000, OPCODE_MASK_H4, addc, arithmetic_inst }, -@@ -161,11 +169,11 @@ struct op_code_struct - {"ncget", INST_TYPE_RD_RFSL, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x6C006000, OPCODE_MASK_H32, ncget, anyware_inst }, - {"ncput", INST_TYPE_R1_RFSL, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x6C00E000, OPCODE_MASK_H32, ncput, anyware_inst }, - {"muli", INST_TYPE_RD_R1_IMM, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x60000000, OPCODE_MASK_H, muli, mult_inst }, -- {"bslli", INST_TYPE_RD_R1_IMM5, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x64000400, OPCODE_MASK_H3, bslli, barrel_shift_inst }, -- {"bsrai", INST_TYPE_RD_R1_IMM5, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x64000200, OPCODE_MASK_H3, bsrai, barrel_shift_inst }, -- {"bsrli", INST_TYPE_RD_R1_IMM5, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x64000000, OPCODE_MASK_H3, bsrli, barrel_shift_inst }, -- {"bsefi", INST_TYPE_RD_R1_IMM5_IMM5, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x64004000, OPCODE_MASK_H32B, bsefi, barrel_shift_inst }, -- {"bsifi", INST_TYPE_RD_R1_IMM5_IMM5, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x64008000, OPCODE_MASK_H32B, bsifi, barrel_shift_inst }, -+ {"bslli", INST_TYPE_RD_R1_IMMS, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x64000400, OPCODE_MASK_H3B, bslli, barrel_shift_inst }, -+ {"bsrai", INST_TYPE_RD_R1_IMMS, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x64000200, OPCODE_MASK_H3B, bsrai, barrel_shift_inst }, -+ {"bsrli", INST_TYPE_RD_R1_IMMS, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x64000000, OPCODE_MASK_H3B, bsrli, barrel_shift_inst }, -+ {"bsefi", INST_TYPE_RD_R1_IMMW_IMMS, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x64004000, OPCODE_MASK_H32B, bsefi, barrel_shift_inst }, -+ {"bsifi", INST_TYPE_RD_R1_IMMW_IMMS, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x64008000, OPCODE_MASK_H32B, bsifi, barrel_shift_inst }, - {"or", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x80000000, OPCODE_MASK_H4, microblaze_or, logical_inst }, - {"and", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x84000000, OPCODE_MASK_H4, microblaze_and, logical_inst }, - {"xor", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x88000000, OPCODE_MASK_H4, microblaze_xor, logical_inst }, -@@ -425,6 +433,129 @@ struct op_code_struct - {"suspend", INST_TYPE_NONE, INST_PC_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xBB020004, OPCODE_MASK_HN, invalid_inst, special_inst }, /* translates to mbar 24. */ - {"swapb", INST_TYPE_RD_R1, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x900001E0, OPCODE_MASK_H4, swapb, arithmetic_inst }, - {"swaph", INST_TYPE_RD_R1, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x900001E2, OPCODE_MASK_H4, swaph, arithmetic_inst }, -+ -+ /* 64-bit instructions */ -+ {"addl", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x00000100, OPCODE_MASK_H4, addl, arithmetic_inst }, -+ {"rsubl", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x04000100, OPCODE_MASK_H4, rsubl, arithmetic_inst }, -+ {"addlc", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x08000100, OPCODE_MASK_H4, addlc, arithmetic_inst }, -+ {"rsublc", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x0C000100, OPCODE_MASK_H4, rsublc, arithmetic_inst }, -+ {"addlk", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x10000100, OPCODE_MASK_H4, addlk, arithmetic_inst }, -+ {"rsublk", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x14000100, OPCODE_MASK_H4, rsublk, arithmetic_inst }, -+ {"addlkc", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x18000100, OPCODE_MASK_H4, addlkc, arithmetic_inst }, -+ {"rsublkc", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x1C000100, OPCODE_MASK_H4, rsublkc, arithmetic_inst }, -+ {"cmpl", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x14000101, OPCODE_MASK_H4, cmpl, arithmetic_inst }, -+ {"cmplu", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x14000103, OPCODE_MASK_H4, cmplu, arithmetic_inst }, -+ {"addli", INST_TYPE_RD_R1_IMML, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x20000000, OPCODE_MASK_H, invalid_inst, arithmetic_inst }, /* Identical to 32-bit */ -+ {"rsubli", INST_TYPE_RD_R1_IMML, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x24000000, OPCODE_MASK_H, invalid_inst, arithmetic_inst }, /* Identical to 32-bit */ -+ {"addlic", INST_TYPE_RD_R1_IMML, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x28000000, OPCODE_MASK_H, invalid_inst, arithmetic_inst }, /* Identical to 32-bit */ -+ {"rsublic", INST_TYPE_RD_R1_IMML, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x2C000000, OPCODE_MASK_H, invalid_inst, arithmetic_inst }, /* Identical to 32-bit */ -+ {"addlik", INST_TYPE_RD_R1_IMML, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x30000000, OPCODE_MASK_H, invalid_inst, arithmetic_inst }, /* Identical to 32-bit */ -+ {"rsublik", INST_TYPE_RD_R1_IMML, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x34000000, OPCODE_MASK_H, invalid_inst, arithmetic_inst }, /* Identical to 32-bit */ -+ {"addlikc", INST_TYPE_RD_R1_IMML, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x38000000, OPCODE_MASK_H, invalid_inst, arithmetic_inst }, /* Identical to 32-bit */ -+ {"rsublikc",INST_TYPE_RD_R1_IMML, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x3C000000, OPCODE_MASK_H, invalid_inst, arithmetic_inst }, /* Identical to 32-bit */ -+ {"mull", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x40000100, OPCODE_MASK_H4, mull, mult_inst }, -+ {"bslll", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x44000500, OPCODE_MASK_H3, bslll, barrel_shift_inst }, -+ {"bslra", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x44000300, OPCODE_MASK_H3, bslra, barrel_shift_inst }, -+ {"bslrl", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x44000100, OPCODE_MASK_H3, bslrl, barrel_shift_inst }, -+ {"bsllli", INST_TYPE_RD_R1_IMMS, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x64002400, OPCODE_MASK_H3B, bsllli, barrel_shift_inst }, -+ {"bslrai", INST_TYPE_RD_R1_IMMS, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x64002200, OPCODE_MASK_H3B, bslrai, barrel_shift_inst }, -+ {"bslrli", INST_TYPE_RD_R1_IMMS, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x64002000, OPCODE_MASK_H3B, bslrli, barrel_shift_inst }, -+ {"bslefi", INST_TYPE_RD_R1_IMMW_IMMS, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x64006000, OPCODE_MASK_H32B, bslefi, barrel_shift_inst }, -+ {"bslifi", INST_TYPE_RD_R1_IMMW_IMMS, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x6400a000, OPCODE_MASK_H32B, bslifi, barrel_shift_inst }, -+ {"orl", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x80000100, OPCODE_MASK_H4, orl, logical_inst }, -+ {"andl", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x84000100, OPCODE_MASK_H4, andl, logical_inst }, -+ {"xorl", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x88000100, OPCODE_MASK_H4, xorl, logical_inst }, -+ {"andnl", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x8C000100, OPCODE_MASK_H4, andnl, logical_inst }, -+ {"pcmplbf", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x80000500, OPCODE_MASK_H4, pcmplbf, logical_inst }, -+ {"pcmpleq", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x88000500, OPCODE_MASK_H4, pcmpleq, logical_inst }, -+ {"pcmplne", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x8C000500, OPCODE_MASK_H4, pcmplne, logical_inst }, -+ {"srla", INST_TYPE_RD_R1, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x90000101, OPCODE_MASK_H34, srla, logical_inst }, -+ {"srlc", INST_TYPE_RD_R1, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x90000121, OPCODE_MASK_H34, srlc, logical_inst }, -+ {"srll", INST_TYPE_RD_R1, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x90000141, OPCODE_MASK_H34, srll, logical_inst }, -+ {"sextl8", INST_TYPE_RD_R1, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x90000160, OPCODE_MASK_H34, sextl8, logical_inst }, -+ {"sextl16", INST_TYPE_RD_R1, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x90000161, OPCODE_MASK_H34, sextl16, logical_inst }, -+ {"sextl32", INST_TYPE_RD_R1, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x90000162, OPCODE_MASK_H34, sextl32, logical_inst }, -+ {"brea", INST_TYPE_R2, INST_PC_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x98010000, OPCODE_MASK_H124, brea, branch_inst }, -+ {"bread", INST_TYPE_R2, INST_PC_OFFSET, DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x98110000, OPCODE_MASK_H124, bread, branch_inst }, -+ {"breald", INST_TYPE_RD_R2, INST_PC_OFFSET, DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x98150000, OPCODE_MASK_H24, breald, branch_inst }, -+ {"beaeq", INST_TYPE_R1_R2, INST_PC_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x9D000000, OPCODE_MASK_H14, beaeq, branch_inst }, -+ {"bealeq", INST_TYPE_R1_R2, INST_PC_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x9D000100, OPCODE_MASK_H14, bealeq, branch_inst }, -+ {"beaeqd", INST_TYPE_R1_R2, INST_PC_OFFSET, DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x9F000000, OPCODE_MASK_H14, beaeqd, branch_inst }, -+ {"bealeqd", INST_TYPE_R1_R2, INST_PC_OFFSET, DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x9F000100, OPCODE_MASK_H14, bealeqd, branch_inst }, -+ {"beane", INST_TYPE_R1_R2, INST_PC_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x9D200000, OPCODE_MASK_H14, beane, branch_inst }, -+ {"bealne", INST_TYPE_R1_R2, INST_PC_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x9D200100, OPCODE_MASK_H14, bealne, branch_inst }, -+ {"beaned", INST_TYPE_R1_R2, INST_PC_OFFSET, DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x9F200000, OPCODE_MASK_H14, beaned, branch_inst }, -+ {"bealned", INST_TYPE_R1_R2, INST_PC_OFFSET, DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x9F200100, OPCODE_MASK_H14, bealned, branch_inst }, -+ {"bealt", INST_TYPE_R1_R2, INST_PC_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x9D400000, OPCODE_MASK_H14, bealt, branch_inst }, -+ {"beallt", INST_TYPE_R1_R2, INST_PC_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x9D400100, OPCODE_MASK_H14, beallt, branch_inst }, -+ {"bealtd", INST_TYPE_R1_R2, INST_PC_OFFSET, DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x9F400000, OPCODE_MASK_H14, bealtd, branch_inst }, -+ {"bealltd", INST_TYPE_R1_R2, INST_PC_OFFSET, DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x9F400100, OPCODE_MASK_H14, bealltd, branch_inst }, -+ {"beale", INST_TYPE_R1_R2, INST_PC_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x9D600000, OPCODE_MASK_H14, beale, branch_inst }, -+ {"bealle", INST_TYPE_R1_R2, INST_PC_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x9D600100, OPCODE_MASK_H14, bealle, branch_inst }, -+ {"bealed", INST_TYPE_R1_R2, INST_PC_OFFSET, DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x9F600000, OPCODE_MASK_H14, bealed, branch_inst }, -+ {"bealled", INST_TYPE_R1_R2, INST_PC_OFFSET, DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x9F600100, OPCODE_MASK_H14, bealled, branch_inst }, -+ {"beagt", INST_TYPE_R1_R2, INST_PC_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x9D800000, OPCODE_MASK_H14, beagt, branch_inst }, -+ {"bealgt", INST_TYPE_R1_R2, INST_PC_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x9D800100, OPCODE_MASK_H14, bealgt, branch_inst }, -+ {"beagtd", INST_TYPE_R1_R2, INST_PC_OFFSET, DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x9F800000, OPCODE_MASK_H14, beagtd, branch_inst }, -+ {"bealgtd", INST_TYPE_R1_R2, INST_PC_OFFSET, DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x9F800100, OPCODE_MASK_H14, bealgtd, branch_inst }, -+ {"beage", INST_TYPE_R1_R2, INST_PC_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x9DA00000, OPCODE_MASK_H14, beage, branch_inst }, -+ {"bealge", INST_TYPE_R1_R2, INST_PC_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x9DA00100, OPCODE_MASK_H14, bealge, branch_inst }, -+ {"beaged", INST_TYPE_R1_R2, INST_PC_OFFSET, DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x9FA00000, OPCODE_MASK_H14, beaged, branch_inst }, -+ {"bealged", INST_TYPE_R1_R2, INST_PC_OFFSET, DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x9FA00100, OPCODE_MASK_H14, bealged, branch_inst }, -+ {"orli", INST_TYPE_RD_R1_IMML, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xA0000000, OPCODE_MASK_H, invalid_inst, logical_inst }, /* Identical to 32-bit */ -+ {"andli", INST_TYPE_RD_R1_IMML, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xA4000000, OPCODE_MASK_H, invalid_inst, logical_inst }, /* Identical to 32-bit */ -+ {"xorli", INST_TYPE_RD_R1_IMML, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xA8000000, OPCODE_MASK_H, invalid_inst, logical_inst }, /* Identical to 32-bit */ -+ {"andnli", INST_TYPE_RD_R1_IMML, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xAC000000, OPCODE_MASK_H, invalid_inst, logical_inst }, /* Identical to 32-bit */ -+ {"imml", INST_TYPE_IMML, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xB2000000, OPCODE_MASK_H8, imml, immediate_inst }, -+ {"breai", INST_TYPE_IMM, INST_PC_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xB8010000, OPCODE_MASK_H12, breai, branch_inst }, -+ {"breaid", INST_TYPE_IMM, INST_PC_OFFSET, DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xB8110000, OPCODE_MASK_H12, breaid, branch_inst }, -+ {"brealid", INST_TYPE_RD_IMM, INST_PC_OFFSET, DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xB8150000, OPCODE_MASK_H2, brealid, branch_inst }, -+ {"beaeqi", INST_TYPE_R1_IMM, INST_PC_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xBD000000, OPCODE_MASK_H1, beaeqi, branch_inst }, -+ {"bealeqi", INST_TYPE_R1_IMML, INST_PC_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xBD000000, OPCODE_MASK_H1, invalid_inst, branch_inst }, /* Identical to beaeqi */ -+ {"beaeqid", INST_TYPE_R1_IMM, INST_PC_OFFSET, DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xBF000000, OPCODE_MASK_H1, beaeqid, branch_inst }, -+ {"bealeqid",INST_TYPE_R1_IMML, INST_PC_OFFSET, DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xBF000000, OPCODE_MASK_H1, invalid_inst, branch_inst }, /* Identical to beaeqid */ -+ {"beanei", INST_TYPE_R1_IMM, INST_PC_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xBD200000, OPCODE_MASK_H1, beanei, branch_inst }, -+ {"bealnei", INST_TYPE_R1_IMML, INST_PC_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xBD200000, OPCODE_MASK_H1, invalid_inst, branch_inst }, /* Identical to beanei */ -+ {"beaneid", INST_TYPE_R1_IMM, INST_PC_OFFSET, DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xBF200000, OPCODE_MASK_H1, beaneid, branch_inst }, -+ {"bealneid",INST_TYPE_R1_IMML, INST_PC_OFFSET, DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xBF200000, OPCODE_MASK_H1, invalid_inst, branch_inst }, /* Identical to beaneid */ -+ {"bealti", INST_TYPE_R1_IMM, INST_PC_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xBD400000, OPCODE_MASK_H1, bealti, branch_inst }, -+ {"beallti", INST_TYPE_R1_IMML, INST_PC_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xBD400000, OPCODE_MASK_H1, invalid_inst, branch_inst }, /* Identical to bealti */ -+ {"bealtid", INST_TYPE_R1_IMM, INST_PC_OFFSET, DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xBF400000, OPCODE_MASK_H1, bealtid, branch_inst }, -+ {"bealltid",INST_TYPE_R1_IMML, INST_PC_OFFSET, DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xBF400000, OPCODE_MASK_H1, invalid_inst, branch_inst }, /* Identical to bealtid */ -+ {"bealei", INST_TYPE_R1_IMM, INST_PC_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xBD600000, OPCODE_MASK_H1, bealei, branch_inst }, -+ {"beallei", INST_TYPE_R1_IMML, INST_PC_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xBD600000, OPCODE_MASK_H1, invalid_inst, branch_inst }, /* Identical to bealei */ -+ {"bealeid", INST_TYPE_R1_IMM, INST_PC_OFFSET, DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xBF600000, OPCODE_MASK_H1, bealeid, branch_inst }, -+ {"bealleid",INST_TYPE_R1_IMML, INST_PC_OFFSET, DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xBF600000, OPCODE_MASK_H1, invalid_inst, branch_inst }, /* Identical to bealeid */ -+ {"beagti", INST_TYPE_R1_IMM, INST_PC_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xBD800000, OPCODE_MASK_H1, beagti, branch_inst }, -+ {"bealgti", INST_TYPE_R1_IMML, INST_PC_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xBD800000, OPCODE_MASK_H1, invalid_inst, branch_inst }, /* Identical to beagti */ -+ {"beagtid", INST_TYPE_R1_IMM, INST_PC_OFFSET, DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xBF800000, OPCODE_MASK_H1, beagtid, branch_inst }, -+ {"bealgtid",INST_TYPE_R1_IMML, INST_PC_OFFSET, DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xBF800000, OPCODE_MASK_H1, invalid_inst, branch_inst }, /* Identical to beagtid */ -+ {"beagei", INST_TYPE_R1_IMM, INST_PC_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xBDA00000, OPCODE_MASK_H1, beagei, branch_inst }, -+ {"bealgei", INST_TYPE_R1_IMML, INST_PC_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xBDA00000, OPCODE_MASK_H1, invalid_inst, branch_inst }, /* Identical to beagei */ -+ {"beageid", INST_TYPE_R1_IMM, INST_PC_OFFSET, DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xBFA00000, OPCODE_MASK_H1, beageid, branch_inst }, -+ {"bealgeid",INST_TYPE_R1_IMML, INST_PC_OFFSET, DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xBFA00000, OPCODE_MASK_H1, invalid_inst, branch_inst }, /* Identical to beageid */ -+ {"ll", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xC8000100, OPCODE_MASK_H4, ll, memory_load_inst }, -+ {"llr", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xC8000300, OPCODE_MASK_H4, llr, memory_load_inst }, -+ {"sl", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xD8000100, OPCODE_MASK_H4, sl, memory_store_inst }, -+ {"slr", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xD8000300, OPCODE_MASK_H4, slr, memory_store_inst }, -+ {"lli", INST_TYPE_RD_R1_IMML, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xE8000000, OPCODE_MASK_H, invalid_inst, memory_load_inst }, /* Identical to 32-bit */ -+ {"sli", INST_TYPE_RD_R1_IMML, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xF8000000, OPCODE_MASK_H, invalid_inst, memory_store_inst }, /* Identical to 32-bit */ -+ {"lla", INST_TYPE_RD_R1_IMML, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x30000000, OPCODE_MASK_H, invalid_inst, arithmetic_inst }, /* lla translates to addlik */ -+ {"dadd", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x58000400, OPCODE_MASK_H4, dadd, arithmetic_inst }, -+ {"drsub", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x58000480, OPCODE_MASK_H4, drsub, arithmetic_inst }, -+ {"dmul", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x58000500, OPCODE_MASK_H4, dmul, arithmetic_inst }, -+ {"ddiv", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x58000580, OPCODE_MASK_H4, ddiv, arithmetic_inst }, -+ {"dcmp.lt", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x58000610, OPCODE_MASK_H4, dcmp_lt, arithmetic_inst }, -+ {"dcmp.eq", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x58000620, OPCODE_MASK_H4, dcmp_eq, arithmetic_inst }, -+ {"dcmp.le", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x58000630, OPCODE_MASK_H4, dcmp_le, arithmetic_inst }, -+ {"dcmp.gt", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x58000640, OPCODE_MASK_H4, dcmp_gt, arithmetic_inst }, -+ {"dcmp.ne", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x58000650, OPCODE_MASK_H4, dcmp_ne, arithmetic_inst }, -+ {"dcmp.ge", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x58000660, OPCODE_MASK_H4, dcmp_ge, arithmetic_inst }, -+ {"dcmp.un", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x58000600, OPCODE_MASK_H4, dcmp_un, arithmetic_inst }, -+ {"dbl", INST_TYPE_RD_R1, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x58000680, OPCODE_MASK_H4, dbl, arithmetic_inst }, -+ {"dlong", INST_TYPE_RD_R1, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x58000700, OPCODE_MASK_H4, dlong, arithmetic_inst }, -+ {"dsqrt", INST_TYPE_RD_R1, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x58000780, OPCODE_MASK_H4, dsqrt, arithmetic_inst }, -+ - {"", 0, 0, 0, 0, 0, 0, 0, 0}, - }; - -@@ -445,8 +576,17 @@ char pvr_register_prefix[] = "rpvr"; - #define MIN_IMM5 ((int) 0x00000000) - #define MAX_IMM5 ((int) 0x0000001f) - -+#define MIN_IMM6 ((int) 0x00000000) -+#define MAX_IMM6 ((int) 0x0000003f) -+ - #define MIN_IMM_WIDTH ((int) 0x00000001) - #define MAX_IMM_WIDTH ((int) 0x00000020) - -+#define MIN_IMM6_WIDTH ((int) 0x00000001) -+#define MAX_IMM6_WIDTH ((int) 0x00000040) -+ -+#define MIN_IMML ((long) 0xffffff8000000000L) -+#define MAX_IMML ((long) 0x0000007fffffffffL) -+ - #endif /* MICROBLAZE_OPC */ - -diff --git a/opcodes/microblaze-opcm.h b/opcodes/microblaze-opcm.h -index 2866269..076dbcd 100644 ---- a/opcodes/microblaze-opcm.h -+++ b/opcodes/microblaze-opcm.h -@@ -25,6 +25,7 @@ - - enum microblaze_instr - { -+ /* 32-bit instructions */ - add, rsub, addc, rsubc, addk, rsubk, addkc, rsubkc, clz, cmp, cmpu, - addi, rsubi, addic, rsubic, addik, rsubik, addikc, rsubikc, mul, - mulh, mulhu, mulhsu,swapb,swaph, -@@ -58,6 +59,18 @@ enum microblaze_instr - aputd, taputd, caputd, tcaputd, naputd, tnaputd, ncaputd, tncaputd, - eagetd, teagetd, ecagetd, tecagetd, neagetd, tneagetd, necagetd, tnecagetd, - eaputd, teaputd, ecaputd, tecaputd, neaputd, tneaputd, necaputd, tnecaputd, -+ -+ /* 64-bit instructions */ -+ addl, rsubl, addlc, rsublc, addlk, rsublk, addlkc, rsublkc, cmpl, cmplu, mull, -+ bslll, bslra, bslrl, bsllli, bslrai, bslrli, bslefi, bslifi, orl, andl, xorl, -+ andnl, pcmplbf, pcmpleq, pcmplne, srla, srlc, srll, sextl8, sextl16, sextl32, -+ brea, bread, breald, beaeq, bealeq, beaeqd, bealeqd, beane, bealne, beaned, -+ bealned, bealt, beallt, bealtd, bealltd, beale, bealle, bealed, bealled, beagt, -+ bealgt, beagtd, bealgtd, beage, bealge, beaged, bealged, breai, breaid, brealid, -+ beaeqi, beaeqid, beanei, beaneid, bealti, bealtid, bealei, bealeid, beagti, -+ beagtid, beagei, beageid, imml, ll, llr, sl, slr, -+ dadd, drsub, dmul, ddiv, dcmp_lt, dcmp_eq, dcmp_le, dcmp_gt, dcmp_ne, dcmp_ge, -+ dcmp_un, dbl, dlong, dsqrt, - invalid_inst - }; - -@@ -135,15 +148,18 @@ enum microblaze_instr_type - #define RA_MASK 0x001F0000 - #define RB_MASK 0x0000F800 - #define IMM_MASK 0x0000FFFF -+#define IMML_MASK 0x00FFFFFF - --/* Imm mask for barrel shifts. */ -+/* Imm masks for barrel shifts. */ - #define IMM5_MASK 0x0000001F -+#define IMM6_MASK 0x0000003F - - /* Imm mask for mbar. */ - #define IMM5_MBAR_MASK 0x03E00000 - --/* Imm mask for extract/insert width. */ -+/* Imm masks for extract/insert width. */ - #define IMM5_WIDTH_MASK 0x000007C0 -+#define IMM6_WIDTH_MASK 0x00000FC0 - - /* FSL imm mask for get, put instructions. */ - #define RFSL_MASK 0x000000F diff --git a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0016-MB-X-initial-commit.patch b/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0016-MB-X-initial-commit.patch deleted file mode 100644 index 406d7bf2..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0016-MB-X-initial-commit.patch +++ /dev/null @@ -1,692 +0,0 @@ -From 549bf1fafb7dfa2718e172a94ff68acb14320ed8 Mon Sep 17 00:00:00 2001 -From: Nagaraju Mekala <nmekala@xilix.com> -Date: Sun, 30 Sep 2018 16:31:26 +0530 -Subject: [PATCH] MB-X initial commit code cleanup is needed. - -Signed-off-by: Mahesh Bodapati <mbodapat@xilinx.com> -Signed-off-by: Nagaraju Mekala <nagaraju.mekala@xilinx.com> - ---- - bfd/bfd-in2.h | 10 +++ - bfd/elf32-microblaze.c | 65 +++++++++++++++++-- - bfd/elf64-microblaze.c | 61 +++++++++++++++++- - bfd/libbfd.h | 2 + - bfd/reloc.c | 12 ++++ - gas/config/tc-microblaze.c | 152 +++++++++++++++++++++++++++++++++++++-------- - include/elf/microblaze.h | 2 + - opcodes/microblaze-opc.h | 4 +- - opcodes/microblaze-opcm.h | 4 +- - 9 files changed, 277 insertions(+), 35 deletions(-) - -diff --git a/bfd/bfd-in2.h b/bfd/bfd-in2.h -index fe6933a..90645d1 100644 ---- a/bfd/bfd-in2.h -+++ b/bfd/bfd-in2.h -@@ -5878,11 +5878,21 @@ done here - only used for relaxing */ - BFD_RELOC_MICROBLAZE_64_NONE, - - /* This is a 64 bit reloc that stores the 32 bit pc relative -+ * +value in two words (with an imml instruction). No relocation is -+ * +done here - only used for relaxing */ -+ BFD_RELOC_MICROBLAZE_64, -+ -+/* This is a 64 bit reloc that stores the 32 bit pc relative - value in two words (with an imm instruction). The relocation is - PC-relative GOT offset */ - BFD_RELOC_MICROBLAZE_64_GOTPC, - - /* This is a 64 bit reloc that stores the 32 bit pc relative -+value in two words (with an imml instruction). The relocation is -+PC-relative GOT offset */ -+ BFD_RELOC_MICROBLAZE_64_GPC, -+ -+/* This is a 64 bit reloc that stores the 32 bit pc relative - value in two words (with an imm instruction). The relocation is - GOT offset */ - BFD_RELOC_MICROBLAZE_64_GOT, -diff --git a/bfd/elf32-microblaze.c b/bfd/elf32-microblaze.c -index d001437..035e71f 100644 ---- a/bfd/elf32-microblaze.c -+++ b/bfd/elf32-microblaze.c -@@ -116,6 +116,20 @@ static reloc_howto_type microblaze_elf_howto_raw[] = - 0x0000ffff, /* Dest Mask. */ - TRUE), /* PC relative offset? */ - -+ HOWTO (R_MICROBLAZE_IMML_64, /* Type. */ -+ 0, /* Rightshift. */ -+ 2, /* Size (0 = byte, 1 = short, 2 = long). */ -+ 16, /* Bitsize. */ -+ TRUE, /* PC_relative. */ -+ 0, /* Bitpos. */ -+ complain_overflow_dont, /* Complain on overflow. */ -+ bfd_elf_generic_reloc,/* Special Function. */ -+ "R_MICROBLAZE_IMML_64", /* Name. */ -+ FALSE, /* Partial Inplace. */ -+ 0, /* Source Mask. */ -+ 0x0000ffff, /* Dest Mask. */ -+ FALSE), /* PC relative offset? */ -+ - /* A 64 bit relocation. Table entry not really used. */ - HOWTO (R_MICROBLAZE_64, /* Type. */ - 0, /* Rightshift. */ -@@ -280,6 +294,21 @@ static reloc_howto_type microblaze_elf_howto_raw[] = - 0x0000ffff, /* Dest Mask. */ - TRUE), /* PC relative offset? */ - -+ /* A 64 bit GOTPC relocation. Table-entry not really used. */ -+ HOWTO (R_MICROBLAZE_GPC_64, /* Type. */ -+ 0, /* Rightshift. */ -+ 2, /* Size (0 = byte, 1 = short, 2 = long). */ -+ 16, /* Bitsize. */ -+ TRUE, /* PC_relative. */ -+ 0, /* Bitpos. */ -+ complain_overflow_dont, /* Complain on overflow. */ -+ bfd_elf_generic_reloc, /* Special Function. */ -+ "R_MICROBLAZE_GPC_64", /* Name. */ -+ FALSE, /* Partial Inplace. */ -+ 0, /* Source Mask. */ -+ 0x0000ffff, /* Dest Mask. */ -+ TRUE), /* PC relative offset? */ -+ - /* A 64 bit GOT relocation. Table-entry not really used. */ - HOWTO (R_MICROBLAZE_GOT_64, /* Type. */ - 0, /* Rightshift. */ -@@ -619,9 +648,15 @@ microblaze_elf_reloc_type_lookup (bfd * abfd ATTRIBUTE_UNUSED, - case BFD_RELOC_VTABLE_ENTRY: - microblaze_reloc = R_MICROBLAZE_GNU_VTENTRY; - break; -+ case BFD_RELOC_MICROBLAZE_64: -+ microblaze_reloc = R_MICROBLAZE_IMML_64; -+ break; - case BFD_RELOC_MICROBLAZE_64_GOTPC: - microblaze_reloc = R_MICROBLAZE_GOTPC_64; - break; -+ case BFD_RELOC_MICROBLAZE_64_GPC: -+ microblaze_reloc = R_MICROBLAZE_GPC_64; -+ break; - case BFD_RELOC_MICROBLAZE_64_GOT: - microblaze_reloc = R_MICROBLAZE_GOT_64; - break; -@@ -1467,7 +1502,7 @@ microblaze_elf_relocate_section (bfd *output_bfd, - if (r_symndx == STN_UNDEF || (input_section->flags & SEC_ALLOC) == 0) - { - relocation += addend; -- if (r_type == R_MICROBLAZE_32) -+ if (r_type == R_MICROBLAZE_32)// || r_type == R_MICROBLAZE_IMML_64) - bfd_put_32 (input_bfd, relocation, contents + offset); - else - { -@@ -1933,6 +1968,28 @@ microblaze_elf_relax_section (bfd *abfd, - irel->r_addend -= calc_fixup (irel->r_addend, 0, sec); - } - break; -+ case R_MICROBLAZE_IMML_64: -+ { -+ /* This was a PC-relative instruction that was -+ completely resolved. */ -+ int sfix, efix; -+ unsigned int val; -+ bfd_vma target_address; -+ target_address = irel->r_addend + irel->r_offset; -+ sfix = calc_fixup (irel->r_offset, 0, sec); -+ efix = calc_fixup (target_address, 0, sec); -+ -+ /* Validate the in-band val. */ -+ val = bfd_get_32 (abfd, contents + irel->r_offset); -+ if (val != irel->r_addend && ELF64_R_TYPE (irel->r_info) == R_MICROBLAZE_32_NONE) { -+ fprintf(stderr, "%d: CORRUPT relax reloc %x %lx\n", __LINE__, val, irel->r_addend); -+ } -+ irel->r_addend -= (efix - sfix); -+ /* Should use HOWTO. */ -+ microblaze_bfd_write_imm_value_64 (abfd, contents + irel->r_offset, -+ irel->r_addend); -+ } -+ break; - case R_MICROBLAZE_NONE: - case R_MICROBLAZE_32_NONE: - { -@@ -2037,9 +2094,9 @@ microblaze_elf_relax_section (bfd *abfd, - microblaze_bfd_write_imm_value_32 (abfd, ocontents + irelscan->r_offset, - irelscan->r_addend); - } -- if (ELF32_R_TYPE (irelscan->r_info) == (int) R_MICROBLAZE_32) -- { -- isym = isymbuf + ELF32_R_SYM (irelscan->r_info); -+ if (ELF32_R_TYPE (irelscan->r_info) == (int) R_MICROBLAZE_32)// || ELF32_R_TYPE (irelscan->r_info) == (int) R_MICROBLAZE_IMML_64) -+ { -+ isym = isymbuf + ELF32_R_SYM (irelscan->r_info); - - /* Look at the reloc only if the value has been resolved. */ - if (isym->st_shndx == shndx -diff --git a/bfd/elf64-microblaze.c b/bfd/elf64-microblaze.c -index 0f43ae6..56a45f2 100644 ---- a/bfd/elf64-microblaze.c -+++ b/bfd/elf64-microblaze.c -@@ -117,6 +117,21 @@ static reloc_howto_type microblaze_elf_howto_raw[] = - TRUE), /* PC relative offset? */ - - /* A 64 bit relocation. Table entry not really used. */ -+ HOWTO (R_MICROBLAZE_IMML_64, /* Type. */ -+ 0, /* Rightshift. */ -+ 4, /* Size (0 = byte, 1 = short, 2 = long). */ -+ 64, /* Bitsize. */ -+ TRUE, /* PC_relative. */ -+ 0, /* Bitpos. */ -+ complain_overflow_dont, /* Complain on overflow. */ -+ bfd_elf_generic_reloc,/* Special Function. */ -+ "R_MICROBLAZE_IMML_64", /* Name. */ -+ FALSE, /* Partial Inplace. */ -+ 0, /* Source Mask. */ -+ 0x0000ffff, /* Dest Mask. */ -+ TRUE), /* PC relative offset? */ -+ -+ /* A 64 bit relocation. Table entry not really used. */ - HOWTO (R_MICROBLAZE_64, /* Type. */ - 0, /* Rightshift. */ - 2, /* Size (0 = byte, 1 = short, 2 = long). */ -@@ -265,6 +280,21 @@ static reloc_howto_type microblaze_elf_howto_raw[] = - 0x0000ffff, /* Dest Mask. */ - TRUE), /* PC relative offset? */ - -+ /* A 64 bit GOTPC relocation. Table-entry not really used. */ -+ HOWTO (R_MICROBLAZE_GPC_64, /* Type. */ -+ 0, /* Rightshift. */ -+ 2, /* Size (0 = byte, 1 = short, 2 = long). */ -+ 16, /* Bitsize. */ -+ TRUE, /* PC_relative. */ -+ 0, /* Bitpos. */ -+ complain_overflow_dont, /* Complain on overflow. */ -+ bfd_elf_generic_reloc, /* Special Function. */ -+ "R_MICROBLAZE_GPC_64", /* Name. */ -+ FALSE, /* Partial Inplace. */ -+ 0, /* Source Mask. */ -+ 0x0000ffff, /* Dest Mask. */ -+ TRUE), /* PC relative offset? */ -+ - /* A 64 bit GOT relocation. Table-entry not really used. */ - HOWTO (R_MICROBLAZE_GOT_64, /* Type. */ - 0, /* Rightshift. */ -@@ -589,9 +619,15 @@ microblaze_elf_reloc_type_lookup (bfd * abfd ATTRIBUTE_UNUSED, - case BFD_RELOC_VTABLE_ENTRY: - microblaze_reloc = R_MICROBLAZE_GNU_VTENTRY; - break; -+ case BFD_RELOC_MICROBLAZE_64: -+ microblaze_reloc = R_MICROBLAZE_IMML_64; -+ break; - case BFD_RELOC_MICROBLAZE_64_GOTPC: - microblaze_reloc = R_MICROBLAZE_GOTPC_64; - break; -+ case BFD_RELOC_MICROBLAZE_64_GPC: -+ microblaze_reloc = R_MICROBLAZE_GPC_64; -+ break; - case BFD_RELOC_MICROBLAZE_64_GOT: - microblaze_reloc = R_MICROBLAZE_GOT_64; - break; -@@ -1161,6 +1197,7 @@ microblaze_elf_relocate_section (bfd *output_bfd, - break; /* Do nothing. */ - - case (int) R_MICROBLAZE_GOTPC_64: -+ case (int) R_MICROBLAZE_GPC_64: - relocation = htab->sgotplt->output_section->vma - + htab->sgotplt->output_offset; - relocation -= (input_section->output_section->vma -@@ -1431,7 +1468,7 @@ microblaze_elf_relocate_section (bfd *output_bfd, - if (r_symndx == STN_UNDEF || (input_section->flags & SEC_ALLOC) == 0) - { - relocation += addend; -- if (r_type == R_MICROBLAZE_32) -+ if (r_type == R_MICROBLAZE_32)// || r_type == R_MICROBLAZE_IMML_64) - bfd_put_32 (input_bfd, relocation, contents + offset); - else - { -@@ -1876,6 +1913,28 @@ microblaze_elf_relax_section (bfd *abfd, - irel->r_addend -= calc_fixup (irel->r_addend, 0, sec); - } - break; -+ case R_MICROBLAZE_IMML_64: -+ { -+ /* This was a PC-relative instruction that was -+ completely resolved. */ -+ int sfix, efix; -+ unsigned int val; -+ bfd_vma target_address; -+ target_address = irel->r_addend + irel->r_offset; -+ sfix = calc_fixup (irel->r_offset, 0, sec); -+ efix = calc_fixup (target_address, 0, sec); -+ -+ /* Validate the in-band val. */ -+ val = bfd_get_32 (abfd, contents + irel->r_offset); -+ if (val != irel->r_addend && ELF64_R_TYPE (irel->r_info) == R_MICROBLAZE_32_NONE) { -+ fprintf(stderr, "%d: CORRUPT relax reloc %x %lx\n", __LINE__, val, irel->r_addend); -+ } -+ irel->r_addend -= (efix - sfix); -+ /* Should use HOWTO. */ -+ microblaze_bfd_write_imm_value_64 (abfd, contents + irel->r_offset, -+ irel->r_addend); -+ } -+ break; - case R_MICROBLAZE_NONE: - case R_MICROBLAZE_32_NONE: - { -diff --git a/bfd/libbfd.h b/bfd/libbfd.h -index feb9fad..450653f 100644 ---- a/bfd/libbfd.h -+++ b/bfd/libbfd.h -@@ -2903,7 +2903,9 @@ static const char *const bfd_reloc_code_real_names[] = { "@@uninitialized@@", - "BFD_RELOC_MICROBLAZE_32_SYM_OP_SYM", - "BFD_RELOC_MICROBLAZE_32_NONE", - "BFD_RELOC_MICROBLAZE_64_NONE", -+ "BFD_RELOC_MICROBLAZE_64", - "BFD_RELOC_MICROBLAZE_64_GOTPC", -+ "BFD_RELOC_MICROBLAZE_64_GPC", - "BFD_RELOC_MICROBLAZE_64_GOT", - "BFD_RELOC_MICROBLAZE_64_PLT", - "BFD_RELOC_MICROBLAZE_64_GOTOFF", -diff --git a/bfd/reloc.c b/bfd/reloc.c -index 87753ae..ccf29f5 100644 ---- a/bfd/reloc.c -+++ b/bfd/reloc.c -@@ -6804,6 +6804,12 @@ ENUMDOC - ENUM - BFD_RELOC_MICROBLAZE_64_NONE - ENUMDOC -+ This is a 32 bit reloc that stores the 32 bit pc relative -+ value in two words (with an imml instruction). No relocation is -+ done here - only used for relaxing -+ENUM -+ BFD_RELOC_MICROBLAZE_64 -+ENUMDOC - This is a 64 bit reloc that stores the 32 bit pc relative - value in two words (with an imm instruction). No relocation is - done here - only used for relaxing -@@ -6811,6 +6817,12 @@ ENUM - BFD_RELOC_MICROBLAZE_64_GOTPC - ENUMDOC - This is a 64 bit reloc that stores the 32 bit pc relative -+ value in two words (with an imml instruction). No relocation is -+ done here - only used for relaxing -+ENUM -+ BFD_RELOC_MICROBLAZE_64_GPC -+ENUMDOC -+ This is a 64 bit reloc that stores the 32 bit pc relative - value in two words (with an imm instruction). The relocation is - PC-relative GOT offset - ENUM -diff --git a/gas/config/tc-microblaze.c b/gas/config/tc-microblaze.c -index c794347..3f90b7c 100644 ---- a/gas/config/tc-microblaze.c -+++ b/gas/config/tc-microblaze.c -@@ -94,6 +94,7 @@ const char FLT_CHARS[] = "rRsSfFdDxXpP"; - #define TLSTPREL_OFFSET 16 - #define TEXT_OFFSET 17 - #define TEXT_PC_OFFSET 18 -+#define DEFINED_64_OFFSET 19 - - /* Initialize the relax table. */ - const relax_typeS md_relax_table[] = -@@ -117,6 +118,8 @@ const relax_typeS md_relax_table[] = - { 0x7fffffff, 0x80000000, INST_WORD_SIZE*2, 0 }, /* 16: TLSTPREL_OFFSET. */ - { 0x7fffffff, 0x80000000, INST_WORD_SIZE*2, 0 }, /* 17: TEXT_OFFSET. */ - { 0x7fffffff, 0x80000000, INST_WORD_SIZE*2, 0 } /* 18: TEXT_PC_OFFSET. */ -+// { 0x7fffffff, 0x80000000, INST_WORD_SIZE*2, 0 } /* 16: TLSTPREL_OFFSET. */ -+ { 0x7fffffffffffffff, 0x8000000000000000, INST_WORD_SIZE, 0 } /* 17: DEFINED_64_OFFSET. */ - }; - - static struct hash_control * opcode_hash_control; /* Opcode mnemonics. */ -@@ -396,7 +399,8 @@ const pseudo_typeS md_pseudo_table[] = - {"data32", cons, 4}, /* Same as word. */ - {"ent", s_func, 0}, /* Treat ent as function entry point. */ - {"end", microblaze_s_func, 1}, /* Treat end as function end point. */ -- {"gpword", s_rva, 4}, /* gpword label => store resolved label address in data section. */ -+ {"gpword", s_rva, 8}, /* gpword label => store resolved label address in data section. */ -+ {"gpdword", s_rva, 8}, /* gpword label => store resolved label address in data section. */ - {"weakext", microblaze_s_weakext, 0}, - {"rodata", microblaze_s_rdata, 0}, - {"sdata2", microblaze_s_rdata, 1}, -@@ -405,6 +409,7 @@ const pseudo_typeS md_pseudo_table[] = - {"sbss", microblaze_s_bss, 1}, - {"text", microblaze_s_text, 0}, - {"word", cons, 4}, -+ {"dword", cons, 8}, - {"frame", s_ignore, 0}, - {"mask", s_ignore, 0}, /* Emitted by gcc. */ - {NULL, NULL, 0} -@@ -898,7 +903,7 @@ check_got (int * got_type, int * got_len) - extern bfd_reloc_code_real_type - parse_cons_expression_microblaze (expressionS *exp, int size) - { -- if (size == 4) -+ if (size == 4 || (microblaze_arch_size == 64 && size == 8)) - { - /* Handle @GOTOFF et.al. */ - char *save, *gotfree_copy; -@@ -930,6 +935,7 @@ parse_cons_expression_microblaze (expressionS *exp, int size) - - static const char * str_microblaze_ro_anchor = "RO"; - static const char * str_microblaze_rw_anchor = "RW"; -+static const char * str_microblaze_64 = "64"; - - static bfd_boolean - check_spl_reg (unsigned * reg) -@@ -1174,6 +1180,33 @@ md_assemble (char * str) - inst |= (immed << IMM_LOW) & IMM_MASK; - } - } -+#if 0 //revisit -+ else if (streq (name, "lli") || streq (name, "sli")) -+ { -+ temp = immed & 0xFFFFFFFFFFFF8000; -+ if ((temp != 0) && (temp != 0xFFFFFFFFFFFF8000)) -+ { -+ /* Needs an immediate inst. */ -+ opcode1 = (struct op_code_struct *) hash_find (opcode_hash_control, "imml"); -+ if (opcode1 == NULL) -+ { -+ as_bad (_("unknown opcode \"%s\""), "imml"); -+ return; -+ } -+ -+ inst1 = opcode1->bit_sequence; -+ inst1 |= ((immedl & 0xFFFFFFFFFFFF0000L) >> 16) & IMML_MASK; -+ output[0] = INST_BYTE0 (inst1); -+ output[1] = INST_BYTE1 (inst1); -+ output[2] = INST_BYTE2 (inst1); -+ output[3] = INST_BYTE3 (inst1); -+ output = frag_more (isize); -+ } -+ inst |= (reg1 << RD_LOW) & RD_MASK; -+ inst |= (reg2 << RA_LOW) & RA_MASK; -+ inst |= (immed << IMM_LOW) & IMM_MASK; -+ } -+#endif - else - { - temp = immed & 0xFFFF8000; -@@ -1926,6 +1959,7 @@ md_assemble (char * str) - if (exp.X_op != O_constant) - { - char *opc = NULL; -+ //char *opc = str_microblaze_64; - relax_substateT subtype; - - if (exp.X_md != 0) -@@ -1939,7 +1973,7 @@ md_assemble (char * str) - subtype, /* PC-relative or not. */ - exp.X_add_symbol, - exp.X_add_number, -- opc); -+ (char *) opc); - immedl = 0L; - } - else -@@ -1977,7 +2011,7 @@ md_assemble (char * str) - reg1 = 0; - } - if (strcmp (op_end, "")) -- op_end = parse_imml (op_end + 1, & exp, MIN_IMM, MAX_IMM); -+ op_end = parse_imml (op_end + 1, & exp, MIN_IMML, MAX_IMML); - else - as_fatal (_("Error in statement syntax")); - -@@ -1987,7 +2021,8 @@ md_assemble (char * str) - - if (exp.X_op != O_constant) - { -- char *opc = NULL; -+ //char *opc = NULL; -+ char *opc = str_microblaze_64; - relax_substateT subtype; - - if (exp.X_md != 0) -@@ -2001,14 +2036,13 @@ md_assemble (char * str) - subtype, /* PC-relative or not. */ - exp.X_add_symbol, - exp.X_add_number, -- opc); -+ (char *) opc); - immedl = 0L; - } - else - { - output = frag_more (isize); - immedl = exp.X_add_number; -- - opcode1 = (struct op_code_struct *) hash_find (opcode_hash_control, "imml"); - if (opcode1 == NULL) - { -@@ -2187,13 +2221,23 @@ md_convert_frag (bfd * abfd ATTRIBUTE_UNUSED, - fragP->fr_fix += INST_WORD_SIZE * 2; - fragP->fr_var = 0; - break; -+ case DEFINED_64_OFFSET: -+ if (fragP->fr_symbol == GOT_symbol) -+ fix_new (fragP, fragP->fr_fix, INST_WORD_SIZE, fragP->fr_symbol, -+ fragP->fr_offset, TRUE, BFD_RELOC_MICROBLAZE_64_GPC); -+ else -+ fix_new (fragP, fragP->fr_fix, INST_WORD_SIZE, fragP->fr_symbol, -+ fragP->fr_offset, TRUE, BFD_RELOC_MICROBLAZE_64); -+ fragP->fr_fix += INST_WORD_SIZE * 2; -+ fragP->fr_var = 0; -+ break; - case DEFINED_ABS_SEGMENT: - if (fragP->fr_symbol == GOT_symbol) - fix_new (fragP, fragP->fr_fix, INST_WORD_SIZE * 2, fragP->fr_symbol, - fragP->fr_offset, TRUE, BFD_RELOC_MICROBLAZE_64_GOTPC); - else - fix_new (fragP, fragP->fr_fix, INST_WORD_SIZE * 2, fragP->fr_symbol, -- fragP->fr_offset, FALSE, BFD_RELOC_64); -+ fragP->fr_offset, TRUE, BFD_RELOC_64); - fragP->fr_fix += INST_WORD_SIZE * 2; - fragP->fr_var = 0; - break; -@@ -2416,22 +2460,38 @@ md_apply_fix (fixS * fixP, - case BFD_RELOC_64_PCREL: - case BFD_RELOC_64: - case BFD_RELOC_MICROBLAZE_64_TEXTREL: -+ case BFD_RELOC_MICROBLAZE_64: - /* Add an imm instruction. First save the current instruction. */ - for (i = 0; i < INST_WORD_SIZE; i++) - buf[i + INST_WORD_SIZE] = buf[i]; -+ if (fixP->fx_r_type == BFD_RELOC_MICROBLAZE_64) -+ { -+ /* Generate the imm instruction. */ -+ opcode1 = (struct op_code_struct *) hash_find (opcode_hash_control, "imml"); -+ if (opcode1 == NULL) -+ { -+ as_bad (_("unknown opcode \"%s\""), "imml"); -+ return; -+ } - -- /* Generate the imm instruction. */ -- opcode1 = (struct op_code_struct *) hash_find (opcode_hash_control, "imm"); -- if (opcode1 == NULL) -- { -- as_bad (_("unknown opcode \"%s\""), "imm"); -- return; -- } -- -- inst1 = opcode1->bit_sequence; -- if (fixP->fx_addsy == NULL || S_IS_DEFINED (fixP->fx_addsy)) -- inst1 |= ((val & 0xFFFF0000) >> 16) & IMM_MASK; -- -+ inst1 = opcode1->bit_sequence; -+ if (fixP->fx_addsy == NULL || S_IS_DEFINED (fixP->fx_addsy)) -+ inst1 |= ((val & 0xFFFFFFFFFFFF0000L) >> 16) & IMML_MASK; -+ } -+ else -+ { -+ /* Generate the imm instruction. */ -+ opcode1 = (struct op_code_struct *) hash_find (opcode_hash_control, "imm"); -+ if (opcode1 == NULL) -+ { -+ as_bad (_("unknown opcode \"%s\""), "imm"); -+ return; -+ } -+ -+ inst1 = opcode1->bit_sequence; -+ if (fixP->fx_addsy == NULL || S_IS_DEFINED (fixP->fx_addsy)) -+ inst1 |= ((val & 0xFFFF0000) >> 16) & IMM_MASK; -+ } - buf[0] = INST_BYTE0 (inst1); - buf[1] = INST_BYTE1 (inst1); - buf[2] = INST_BYTE2 (inst1); -@@ -2460,6 +2520,7 @@ md_apply_fix (fixS * fixP, - /* Fall through. */ - - case BFD_RELOC_MICROBLAZE_64_GOTPC: -+ case BFD_RELOC_MICROBLAZE_64_GPC: - case BFD_RELOC_MICROBLAZE_64_GOT: - case BFD_RELOC_MICROBLAZE_64_PLT: - case BFD_RELOC_MICROBLAZE_64_GOTOFF: -@@ -2467,12 +2528,16 @@ md_apply_fix (fixS * fixP, - /* Add an imm instruction. First save the current instruction. */ - for (i = 0; i < INST_WORD_SIZE; i++) - buf[i + INST_WORD_SIZE] = buf[i]; -- -- /* Generate the imm instruction. */ -- opcode1 = (struct op_code_struct *) hash_find (opcode_hash_control, "imm"); -+ if (fixP->fx_r_type == BFD_RELOC_MICROBLAZE_64_GPC) -+ opcode1 = (struct op_code_struct *) hash_find (opcode_hash_control, "imml"); -+ else -+ opcode1 = (struct op_code_struct *) hash_find (opcode_hash_control, "imm"); - if (opcode1 == NULL) - { -- as_bad (_("unknown opcode \"%s\""), "imm"); -+ if (fixP->fx_r_type == BFD_RELOC_MICROBLAZE_64_GPC) -+ as_bad (_("unknown opcode \"%s\""), "imml"); -+ else -+ as_bad (_("unknown opcode \"%s\""), "imm"); - return; - } - -@@ -2496,6 +2561,8 @@ md_apply_fix (fixS * fixP, - moves code around due to relaxing. */ - if (fixP->fx_r_type == BFD_RELOC_64_PCREL) - fixP->fx_r_type = BFD_RELOC_MICROBLAZE_64_NONE; -+ if (fixP->fx_r_type == BFD_RELOC_MICROBLAZE_64) -+ fixP->fx_r_type = BFD_RELOC_MICROBLAZE_64_NONE; - else if (fixP->fx_r_type == BFD_RELOC_32) - fixP->fx_r_type = BFD_RELOC_MICROBLAZE_32_NONE; - else -@@ -2539,6 +2606,32 @@ md_estimate_size_before_relax (fragS * fragP, - as_bad (_("Absolute PC-relative value in relaxation code. Assembler error.....")); - abort (); - } -+ else if (S_GET_SEGMENT (fragP->fr_symbol) == segment_type -+ && !S_IS_WEAK (fragP->fr_symbol)) -+ { -+ if (fragP->fr_opcode != NULL) { -+ if(streq (fragP->fr_opcode, str_microblaze_64)) -+ { -+ /* Used as an absolute value. */ -+ fragP->fr_subtype = DEFINED_64_OFFSET; -+ /* Variable part does not change. */ -+ fragP->fr_var = INST_WORD_SIZE; -+ } -+ else -+ { -+ fragP->fr_subtype = DEFINED_PC_OFFSET; -+ /* Don't know now whether we need an imm instruction. */ -+ fragP->fr_var = INST_WORD_SIZE; -+ } -+ } -+ else -+ { -+ fragP->fr_subtype = DEFINED_PC_OFFSET; -+ /* Don't know now whether we need an imm instruction. */ -+ fragP->fr_var = INST_WORD_SIZE; -+ } -+ } -+ #if 0 - else if (S_GET_SEGMENT (fragP->fr_symbol) == segment_type && - !S_IS_WEAK (fragP->fr_symbol)) - { -@@ -2546,6 +2639,7 @@ md_estimate_size_before_relax (fragS * fragP, - /* Don't know now whether we need an imm instruction. */ - fragP->fr_var = INST_WORD_SIZE; - } -+#endif - else if (S_IS_DEFINED (fragP->fr_symbol) - && (((S_GET_SEGMENT (fragP->fr_symbol))->flags & SEC_CODE) == 0)) - { -@@ -2648,6 +2742,7 @@ md_estimate_size_before_relax (fragS * fragP, - case TLSLD_OFFSET: - case TLSTPREL_OFFSET: - case TLSDTPREL_OFFSET: -+ case DEFINED_64_OFFSET: - fragP->fr_var = INST_WORD_SIZE*2; - break; - case DEFINED_RO_SEGMENT: -@@ -2701,7 +2796,7 @@ md_pcrel_from_section (fixS * fixp, segT sec ATTRIBUTE_UNUSED) - else - { - /* The case where we are going to resolve things... */ -- if (fixp->fx_r_type == BFD_RELOC_64_PCREL) -+ if (fixp->fx_r_type == BFD_RELOC_64_PCREL ||fixp->fx_r_type == BFD_RELOC_MICROBLAZE_64) - return fixp->fx_where + fixp->fx_frag->fr_address + INST_WORD_SIZE; - else - return fixp->fx_where + fixp->fx_frag->fr_address; -@@ -2734,6 +2829,8 @@ tc_gen_reloc (asection * section ATTRIBUTE_UNUSED, fixS * fixp) - case BFD_RELOC_MICROBLAZE_32_RWSDA: - case BFD_RELOC_MICROBLAZE_32_SYM_OP_SYM: - case BFD_RELOC_MICROBLAZE_64_GOTPC: -+ case BFD_RELOC_MICROBLAZE_64_GPC: -+ case BFD_RELOC_MICROBLAZE_64: - case BFD_RELOC_MICROBLAZE_64_GOT: - case BFD_RELOC_MICROBLAZE_64_PLT: - case BFD_RELOC_MICROBLAZE_64_GOTOFF: -@@ -2876,7 +2973,10 @@ cons_fix_new_microblaze (fragS * frag, - r = BFD_RELOC_32; - break; - case 8: -- r = BFD_RELOC_64; -+ if (microblaze_arch_size == 64) -+ r = BFD_RELOC_32; -+ else -+ r = BFD_RELOC_64; - break; - default: - as_bad (_("unsupported BFD relocation size %u"), size); -diff --git a/include/elf/microblaze.h b/include/elf/microblaze.h -index 6ee0966..16b2736 100644 ---- a/include/elf/microblaze.h -+++ b/include/elf/microblaze.h -@@ -62,6 +62,8 @@ START_RELOC_NUMBERS (elf_microblaze_reloc_type) - RELOC_NUMBER (R_MICROBLAZE_TEXTREL_64, 31) /* TEXT Entry offset 64-bit. */ - RELOC_NUMBER (R_MICROBLAZE_TEXTREL_32_LO, 32) /* TEXT Entry offset 32-bit. */ - RELOC_NUMBER (R_MICROBLAZE_32_NONE, 33) -+ RELOC_NUMBER (R_MICROBLAZE_IMML_64, 34) -+ RELOC_NUMBER (R_MICROBLAZE_GPC_64, 35) /* GOT entry offset. */ - - END_RELOC_NUMBERS (R_MICROBLAZE_max) - -diff --git a/opcodes/microblaze-opc.h b/opcodes/microblaze-opc.h -index 985834b..9b6264b 100644 ---- a/opcodes/microblaze-opc.h -+++ b/opcodes/microblaze-opc.h -@@ -538,8 +538,8 @@ struct op_code_struct - {"llr", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xC8000300, OPCODE_MASK_H4, llr, memory_load_inst }, - {"sl", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xD8000100, OPCODE_MASK_H4, sl, memory_store_inst }, - {"slr", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xD8000300, OPCODE_MASK_H4, slr, memory_store_inst }, -- {"lli", INST_TYPE_RD_R1_IMML, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xE8000000, OPCODE_MASK_H, invalid_inst, memory_load_inst }, /* Identical to 32-bit */ -- {"sli", INST_TYPE_RD_R1_IMML, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xF8000000, OPCODE_MASK_H, invalid_inst, memory_store_inst }, /* Identical to 32-bit */ -+ {"lli", INST_TYPE_RD_R1_IMM, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xEC000000, OPCODE_MASK_H, invalid_inst, memory_load_inst }, /* Identical to 32-bit */ -+ {"sli", INST_TYPE_RD_R1_IMM, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xFC000000, OPCODE_MASK_H, invalid_inst, memory_store_inst }, /* Identical to 32-bit */ - {"lla", INST_TYPE_RD_R1_IMML, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x30000000, OPCODE_MASK_H, invalid_inst, arithmetic_inst }, /* lla translates to addlik */ - {"dadd", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x58000400, OPCODE_MASK_H4, dadd, arithmetic_inst }, - {"drsub", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x58000480, OPCODE_MASK_H4, drsub, arithmetic_inst }, -diff --git a/opcodes/microblaze-opcm.h b/opcodes/microblaze-opcm.h -index 076dbcd..5f2e190 100644 ---- a/opcodes/microblaze-opcm.h -+++ b/opcodes/microblaze-opcm.h -@@ -40,8 +40,8 @@ enum microblaze_instr - imm, rtsd, rtid, rtbd, rted, bri, brid, brlid, brai, braid, bralid, - brki, beqi, beqid, bnei, bneid, blti, bltid, blei, bleid, bgti, - bgtid, bgei, bgeid, lbu, lbuea, lbur, lhu, lhuea, lhur, lw, lwea, lwr, lwx, -- sb, sbea, sbr, sh, shea, shr, sw, swea, swr, swx, lbui, lhui, lwi, -- sbi, shi, swi, msrset, msrclr, tuqula, fadd, frsub, fmul, fdiv, -+ sb, sbea, sbr, sh, shea, shr, sw, swea, swr, swx, lbui, lhui, lwi, lli, -+ sbi, shi, sli, swi, msrset, msrclr, tuqula, fadd, frsub, fmul, fdiv, - fcmp_lt, fcmp_eq, fcmp_le, fcmp_gt, fcmp_ne, fcmp_ge, fcmp_un, flt, - fint, fsqrt, - tget, tcget, tnget, tncget, tput, tcput, tnput, tncput, diff --git a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0017-Patch-Microblaze-negl-instruction-is-overriding-rsub.patch b/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0017-Patch-Microblaze-negl-instruction-is-overriding-rsub.patch deleted file mode 100644 index 062ee364..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0017-Patch-Microblaze-negl-instruction-is-overriding-rsub.patch +++ /dev/null @@ -1,36 +0,0 @@ -From 3735a1bb6174f15bde23dd2767675b49c9e8712f Mon Sep 17 00:00:00 2001 -From: Mahesh Bodapati <mbodapat@xilinx.com> -Date: Tue, 11 Sep 2018 13:48:33 +0530 -Subject: [PATCH] negl instruction is overriding rsubl,fixed it by changing the - instruction order... - -Signed-off-by: Mahesh Bodapati <mbodapat@xilinx.com> -Signed-off-by: Nagaraju Mekala <nagaraju.mekala@xilinx.com> - ---- - opcodes/microblaze-opc.h | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -diff --git a/opcodes/microblaze-opc.h b/opcodes/microblaze-opc.h -index 9b6264b..824afc0 100644 ---- a/opcodes/microblaze-opc.h -+++ b/opcodes/microblaze-opc.h -@@ -275,9 +275,7 @@ struct op_code_struct - {"la", INST_TYPE_RD_R1_IMM, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x30000000, OPCODE_MASK_H, invalid_inst, arithmetic_inst }, /* la translates to addik. */ - {"tuqula",INST_TYPE_RD, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x3000002A, OPCODE_MASK_H, invalid_inst, arithmetic_inst }, /* tuqula rd translates to addik rd, r0, 42. */ - {"not", INST_TYPE_RD_R1, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xA800FFFF, OPCODE_MASK_H34, invalid_inst, logical_inst }, /* not translates to xori rd,ra,-1. */ -- {"neg", INST_TYPE_RD_R1, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x04000000, OPCODE_MASK_H, invalid_inst, arithmetic_inst }, /* neg translates to rsub rd, ra, r0. */ - {"rtb", INST_TYPE_R1, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xB6000004, OPCODE_MASK_H1, invalid_inst, return_inst }, /* rtb translates to rts rd, 4. */ -- {"sub", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x04000000, OPCODE_MASK_H, invalid_inst, arithmetic_inst }, /* sub translates to rsub rd, rb, ra. */ - {"lmi", INST_TYPE_RD_R1_IMM, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xE8000000, OPCODE_MASK_H, invalid_inst, memory_load_inst }, - {"smi", INST_TYPE_RD_R1_IMM, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xF8000000, OPCODE_MASK_H, invalid_inst, memory_store_inst }, - {"msrset",INST_TYPE_RD_IMM15, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x94100000, OPCODE_MASK_H23N, msrset, special_inst }, -@@ -555,6 +553,8 @@ struct op_code_struct - {"dbl", INST_TYPE_RD_R1, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x58000680, OPCODE_MASK_H4, dbl, arithmetic_inst }, - {"dlong", INST_TYPE_RD_R1, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x58000700, OPCODE_MASK_H4, dlong, arithmetic_inst }, - {"dsqrt", INST_TYPE_RD_R1, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x58000780, OPCODE_MASK_H4, dsqrt, arithmetic_inst }, -+ {"neg", INST_TYPE_RD_R1, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x04000000, OPCODE_MASK_H, invalid_inst, arithmetic_inst }, /* neg translates to rsub rd, ra, r0. */ -+ {"sub", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x04000000, OPCODE_MASK_H, invalid_inst, arithmetic_inst }, /* sub translates to rsub rd, rb, ra. */ - - {"", 0, 0, 0, 0, 0, 0, 0, 0}, - }; diff --git a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0018-Added-relocations-for-MB-X.patch b/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0018-Added-relocations-for-MB-X.patch deleted file mode 100644 index b98db228..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0018-Added-relocations-for-MB-X.patch +++ /dev/null @@ -1,348 +0,0 @@ -From 6b6c4a67212ced3fe1593fb173cfc4bce8d7f922 Mon Sep 17 00:00:00 2001 -From: Nagaraju Mekala <nmekala@xilix.com> -Date: Tue, 11 Sep 2018 17:30:17 +0530 -Subject: [PATCH] Added relocations for MB-X - -Signed-off-by: Mahesh Bodapati <mbodapat@xilinx.com> -Signed-off-by: Nagaraju Mekala <nagaraju.mekala@xilinx.com> - ---- - bfd/bfd-in2.h | 11 ++++-- - bfd/libbfd.h | 4 +-- - bfd/reloc.c | 26 +++++++------- - gas/config/tc-microblaze.c | 90 ++++++++++++++++++++-------------------------- - 4 files changed, 62 insertions(+), 69 deletions(-) - -diff --git a/bfd/bfd-in2.h b/bfd/bfd-in2.h -index 90645d1..f74aac1 100644 ---- a/bfd/bfd-in2.h -+++ b/bfd/bfd-in2.h -@@ -5873,16 +5873,21 @@ done here - only used for relaxing */ - BFD_RELOC_MICROBLAZE_32_NONE, - - /* This is a 64 bit reloc that stores the 32 bit pc relative -- * +value in two words (with an imm instruction). No relocation is -+ * +value in two words (with an imml instruction). No relocation is - * +done here - only used for relaxing */ -- BFD_RELOC_MICROBLAZE_64_NONE, -+ BFD_RELOC_MICROBLAZE_64_PCREL, - --/* This is a 64 bit reloc that stores the 32 bit pc relative -+/* This is a 64 bit reloc that stores the 32 bit relative - * +value in two words (with an imml instruction). No relocation is - * +done here - only used for relaxing */ - BFD_RELOC_MICROBLAZE_64, - - /* This is a 64 bit reloc that stores the 32 bit pc relative -+ * +value in two words (with an imm instruction). No relocation is -+ * +done here - only used for relaxing */ -+ BFD_RELOC_MICROBLAZE_64_NONE, -+ -+/* This is a 64 bit reloc that stores the 32 bit pc relative - value in two words (with an imm instruction). The relocation is - PC-relative GOT offset */ - BFD_RELOC_MICROBLAZE_64_GOTPC, -diff --git a/bfd/libbfd.h b/bfd/libbfd.h -index 450653f..d87a183 100644 ---- a/bfd/libbfd.h -+++ b/bfd/libbfd.h -@@ -2903,14 +2903,14 @@ static const char *const bfd_reloc_code_real_names[] = { "@@uninitialized@@", - "BFD_RELOC_MICROBLAZE_32_SYM_OP_SYM", - "BFD_RELOC_MICROBLAZE_32_NONE", - "BFD_RELOC_MICROBLAZE_64_NONE", -- "BFD_RELOC_MICROBLAZE_64", - "BFD_RELOC_MICROBLAZE_64_GOTPC", -- "BFD_RELOC_MICROBLAZE_64_GPC", - "BFD_RELOC_MICROBLAZE_64_GOT", - "BFD_RELOC_MICROBLAZE_64_PLT", - "BFD_RELOC_MICROBLAZE_64_GOTOFF", - "BFD_RELOC_MICROBLAZE_32_GOTOFF", - "BFD_RELOC_MICROBLAZE_COPY", -+ "BFD_RELOC_MICROBLAZE_64", -+ "BFD_RELOC_MICROBLAZE_64_PCREL", - "BFD_RELOC_MICROBLAZE_64_TLS", - "BFD_RELOC_MICROBLAZE_64_TLSGD", - "BFD_RELOC_MICROBLAZE_64_TLSLD", -diff --git a/bfd/reloc.c b/bfd/reloc.c -index ccf29f5..861f2d4 100644 ---- a/bfd/reloc.c -+++ b/bfd/reloc.c -@@ -6804,12 +6804,6 @@ ENUMDOC - ENUM - BFD_RELOC_MICROBLAZE_64_NONE - ENUMDOC -- This is a 32 bit reloc that stores the 32 bit pc relative -- value in two words (with an imml instruction). No relocation is -- done here - only used for relaxing --ENUM -- BFD_RELOC_MICROBLAZE_64 --ENUMDOC - This is a 64 bit reloc that stores the 32 bit pc relative - value in two words (with an imm instruction). No relocation is - done here - only used for relaxing -@@ -6817,12 +6811,6 @@ ENUM - BFD_RELOC_MICROBLAZE_64_GOTPC - ENUMDOC - This is a 64 bit reloc that stores the 32 bit pc relative -- value in two words (with an imml instruction). No relocation is -- done here - only used for relaxing --ENUM -- BFD_RELOC_MICROBLAZE_64_GPC --ENUMDOC -- This is a 64 bit reloc that stores the 32 bit pc relative - value in two words (with an imm instruction). The relocation is - PC-relative GOT offset - ENUM -@@ -6906,6 +6894,20 @@ ENUMDOC - value in two words (with an imm instruction). The relocation is - relative offset from start of TEXT. - -+ This is a 64 bit reloc that stores 64-bit thread pointer relative offset -+ to two words (uses imml instruction). -+ENUM -+BFD_RELOC_MICROBLAZE_64, -+ENUMDOC -+ This is a 64 bit reloc that stores the 64 bit pc relative -+ value in two words (with an imml instruction). No relocation is -+ done here - only used for relaxing -+ENUM -+BFD_RELOC_MICROBLAZE_64_PCREL, -+ENUMDOC -+ This is a 32 bit reloc that stores the 32 bit pc relative -+ value in two words (with an imml instruction). No relocation is -+ done here - only used for relaxing - ENUM - BFD_RELOC_AARCH64_RELOC_START - ENUMDOC -diff --git a/gas/config/tc-microblaze.c b/gas/config/tc-microblaze.c -index 3f90b7c..587a4d5 100644 ---- a/gas/config/tc-microblaze.c -+++ b/gas/config/tc-microblaze.c -@@ -95,6 +95,7 @@ const char FLT_CHARS[] = "rRsSfFdDxXpP"; - #define TEXT_OFFSET 17 - #define TEXT_PC_OFFSET 18 - #define DEFINED_64_OFFSET 19 -+#define DEFINED_64_PC_OFFSET 20 - - /* Initialize the relax table. */ - const relax_typeS md_relax_table[] = -@@ -119,7 +120,8 @@ const relax_typeS md_relax_table[] = - { 0x7fffffff, 0x80000000, INST_WORD_SIZE*2, 0 }, /* 17: TEXT_OFFSET. */ - { 0x7fffffff, 0x80000000, INST_WORD_SIZE*2, 0 } /* 18: TEXT_PC_OFFSET. */ - // { 0x7fffffff, 0x80000000, INST_WORD_SIZE*2, 0 } /* 16: TLSTPREL_OFFSET. */ -- { 0x7fffffffffffffff, 0x8000000000000000, INST_WORD_SIZE, 0 } /* 17: DEFINED_64_OFFSET. */ -+ { 0x7fffffffffffffff, 0x8000000000000000, INST_WORD_SIZE, 0 } /* 19: DEFINED_64_OFFSET. */ -+ { 0x7fffffffffffffff, 0x8000000000000000, INST_WORD_SIZE*2, 0 } /* 20: DEFINED_64_PC_OFFSET. */ - }; - - static struct hash_control * opcode_hash_control; /* Opcode mnemonics. */ -@@ -1180,33 +1182,6 @@ md_assemble (char * str) - inst |= (immed << IMM_LOW) & IMM_MASK; - } - } --#if 0 //revisit -- else if (streq (name, "lli") || streq (name, "sli")) -- { -- temp = immed & 0xFFFFFFFFFFFF8000; -- if ((temp != 0) && (temp != 0xFFFFFFFFFFFF8000)) -- { -- /* Needs an immediate inst. */ -- opcode1 = (struct op_code_struct *) hash_find (opcode_hash_control, "imml"); -- if (opcode1 == NULL) -- { -- as_bad (_("unknown opcode \"%s\""), "imml"); -- return; -- } -- -- inst1 = opcode1->bit_sequence; -- inst1 |= ((immedl & 0xFFFFFFFFFFFF0000L) >> 16) & IMML_MASK; -- output[0] = INST_BYTE0 (inst1); -- output[1] = INST_BYTE1 (inst1); -- output[2] = INST_BYTE2 (inst1); -- output[3] = INST_BYTE3 (inst1); -- output = frag_more (isize); -- } -- inst |= (reg1 << RD_LOW) & RD_MASK; -- inst |= (reg2 << RA_LOW) & RA_MASK; -- inst |= (immed << IMM_LOW) & IMM_MASK; -- } --#endif - else - { - temp = immed & 0xFFFF8000; -@@ -1958,8 +1933,8 @@ md_assemble (char * str) - - if (exp.X_op != O_constant) - { -- char *opc = NULL; -- //char *opc = str_microblaze_64; -+ //char *opc = NULL; -+ char *opc = str_microblaze_64; - relax_substateT subtype; - - if (exp.X_md != 0) -@@ -2221,13 +2196,19 @@ md_convert_frag (bfd * abfd ATTRIBUTE_UNUSED, - fragP->fr_fix += INST_WORD_SIZE * 2; - fragP->fr_var = 0; - break; -+ case DEFINED_64_PC_OFFSET: -+ fix_new (fragP, fragP->fr_fix, INST_WORD_SIZE, fragP->fr_symbol, -+ fragP->fr_offset, TRUE, BFD_RELOC_MICROBLAZE_64_PCREL); -+ fragP->fr_fix += INST_WORD_SIZE * 2; -+ fragP->fr_var = 0; -+ break; - case DEFINED_64_OFFSET: - if (fragP->fr_symbol == GOT_symbol) - fix_new (fragP, fragP->fr_fix, INST_WORD_SIZE, fragP->fr_symbol, -- fragP->fr_offset, TRUE, BFD_RELOC_MICROBLAZE_64_GPC); -+ fragP->fr_offset, FALSE, BFD_RELOC_MICROBLAZE_64_GPC); - else - fix_new (fragP, fragP->fr_fix, INST_WORD_SIZE, fragP->fr_symbol, -- fragP->fr_offset, TRUE, BFD_RELOC_MICROBLAZE_64); -+ fragP->fr_offset, FALSE, BFD_RELOC_MICROBLAZE_64); - fragP->fr_fix += INST_WORD_SIZE * 2; - fragP->fr_var = 0; - break; -@@ -2237,7 +2218,7 @@ md_convert_frag (bfd * abfd ATTRIBUTE_UNUSED, - fragP->fr_offset, TRUE, BFD_RELOC_MICROBLAZE_64_GOTPC); - else - fix_new (fragP, fragP->fr_fix, INST_WORD_SIZE * 2, fragP->fr_symbol, -- fragP->fr_offset, TRUE, BFD_RELOC_64); -+ fragP->fr_offset, FALSE, BFD_RELOC_64); - fragP->fr_fix += INST_WORD_SIZE * 2; - fragP->fr_var = 0; - break; -@@ -2457,14 +2438,17 @@ md_apply_fix (fixS * fixP, - } - } - break; -+ - case BFD_RELOC_64_PCREL: - case BFD_RELOC_64: - case BFD_RELOC_MICROBLAZE_64_TEXTREL: - case BFD_RELOC_MICROBLAZE_64: -+ case BFD_RELOC_MICROBLAZE_64_PCREL: - /* Add an imm instruction. First save the current instruction. */ - for (i = 0; i < INST_WORD_SIZE; i++) - buf[i + INST_WORD_SIZE] = buf[i]; -- if (fixP->fx_r_type == BFD_RELOC_MICROBLAZE_64) -+ if (fixP->fx_r_type == BFD_RELOC_MICROBLAZE_64 -+ || fixP->fx_r_type == BFD_RELOC_MICROBLAZE_64_PCREL) - { - /* Generate the imm instruction. */ - opcode1 = (struct op_code_struct *) hash_find (opcode_hash_control, "imml"); -@@ -2477,6 +2461,10 @@ md_apply_fix (fixS * fixP, - inst1 = opcode1->bit_sequence; - if (fixP->fx_addsy == NULL || S_IS_DEFINED (fixP->fx_addsy)) - inst1 |= ((val & 0xFFFFFFFFFFFF0000L) >> 16) & IMML_MASK; -+ if (fixP->fx_r_type == BFD_RELOC_MICROBLAZE_64) -+ fixP->fx_r_type = BFD_RELOC_64; -+ if (fixP->fx_r_type == BFD_RELOC_MICROBLAZE_64_PCREL) -+ fixP->fx_r_type = BFD_RELOC_64_PCREL; - } - else - { -@@ -2487,7 +2475,7 @@ md_apply_fix (fixS * fixP, - as_bad (_("unknown opcode \"%s\""), "imm"); - return; - } -- -+ - inst1 = opcode1->bit_sequence; - if (fixP->fx_addsy == NULL || S_IS_DEFINED (fixP->fx_addsy)) - inst1 |= ((val & 0xFFFF0000) >> 16) & IMM_MASK; -@@ -2534,7 +2522,7 @@ md_apply_fix (fixS * fixP, - opcode1 = (struct op_code_struct *) hash_find (opcode_hash_control, "imm"); - if (opcode1 == NULL) - { -- if (fixP->fx_r_type == BFD_RELOC_MICROBLAZE_64_GPC) -+ if (fixP->fx_r_type == BFD_RELOC_MICROBLAZE_64_GPC) - as_bad (_("unknown opcode \"%s\""), "imml"); - else - as_bad (_("unknown opcode \"%s\""), "imm"); -@@ -2561,8 +2549,6 @@ md_apply_fix (fixS * fixP, - moves code around due to relaxing. */ - if (fixP->fx_r_type == BFD_RELOC_64_PCREL) - fixP->fx_r_type = BFD_RELOC_MICROBLAZE_64_NONE; -- if (fixP->fx_r_type == BFD_RELOC_MICROBLAZE_64) -- fixP->fx_r_type = BFD_RELOC_MICROBLAZE_64_NONE; - else if (fixP->fx_r_type == BFD_RELOC_32) - fixP->fx_r_type = BFD_RELOC_MICROBLAZE_32_NONE; - else -@@ -2613,33 +2599,24 @@ md_estimate_size_before_relax (fragS * fragP, - if(streq (fragP->fr_opcode, str_microblaze_64)) - { - /* Used as an absolute value. */ -- fragP->fr_subtype = DEFINED_64_OFFSET; -+ fragP->fr_subtype = DEFINED_64_PC_OFFSET; - /* Variable part does not change. */ -- fragP->fr_var = INST_WORD_SIZE; -+ fragP->fr_var = INST_WORD_SIZE*2; - } - else - { - fragP->fr_subtype = DEFINED_PC_OFFSET; -- /* Don't know now whether we need an imm instruction. */ -+ /* Don't know now whether we need an imm instruction. */ - fragP->fr_var = INST_WORD_SIZE; - } - } - else - { - fragP->fr_subtype = DEFINED_PC_OFFSET; -- /* Don't know now whether we need an imm instruction. */ -+ /* Don't know now whether we need an imm instruction. */ - fragP->fr_var = INST_WORD_SIZE; - } - } -- #if 0 -- else if (S_GET_SEGMENT (fragP->fr_symbol) == segment_type && -- !S_IS_WEAK (fragP->fr_symbol)) -- { -- fragP->fr_subtype = DEFINED_PC_OFFSET; -- /* Don't know now whether we need an imm instruction. */ -- fragP->fr_var = INST_WORD_SIZE; -- } --#endif - else if (S_IS_DEFINED (fragP->fr_symbol) - && (((S_GET_SEGMENT (fragP->fr_symbol))->flags & SEC_CODE) == 0)) - { -@@ -2669,6 +2646,13 @@ md_estimate_size_before_relax (fragS * fragP, - /* Variable part does not change. */ - fragP->fr_var = INST_WORD_SIZE*2; - } -+ else if (streq (fragP->fr_opcode, str_microblaze_64)) -+ { -+ /* Used as an absolute value. */ -+ fragP->fr_subtype = DEFINED_64_OFFSET; -+ /* Variable part does not change. */ -+ fragP->fr_var = INST_WORD_SIZE; -+ } - else if (streq (fragP->fr_opcode, str_microblaze_ro_anchor)) - { - /* It is accessed using the small data read only anchor. */ -@@ -2743,6 +2727,7 @@ md_estimate_size_before_relax (fragS * fragP, - case TLSTPREL_OFFSET: - case TLSDTPREL_OFFSET: - case DEFINED_64_OFFSET: -+ case DEFINED_64_PC_OFFSET: - fragP->fr_var = INST_WORD_SIZE*2; - break; - case DEFINED_RO_SEGMENT: -@@ -2796,7 +2781,7 @@ md_pcrel_from_section (fixS * fixp, segT sec ATTRIBUTE_UNUSED) - else - { - /* The case where we are going to resolve things... */ -- if (fixp->fx_r_type == BFD_RELOC_64_PCREL ||fixp->fx_r_type == BFD_RELOC_MICROBLAZE_64) -+ if (fixp->fx_r_type == BFD_RELOC_64_PCREL ||fixp->fx_r_type == BFD_RELOC_MICROBLAZE_64_PCREL) - return fixp->fx_where + fixp->fx_frag->fr_address + INST_WORD_SIZE; - else - return fixp->fx_where + fixp->fx_frag->fr_address; -@@ -2831,6 +2816,7 @@ tc_gen_reloc (asection * section ATTRIBUTE_UNUSED, fixS * fixp) - case BFD_RELOC_MICROBLAZE_64_GOTPC: - case BFD_RELOC_MICROBLAZE_64_GPC: - case BFD_RELOC_MICROBLAZE_64: -+ case BFD_RELOC_MICROBLAZE_64_PCREL: - case BFD_RELOC_MICROBLAZE_64_GOT: - case BFD_RELOC_MICROBLAZE_64_PLT: - case BFD_RELOC_MICROBLAZE_64_GOTOFF: diff --git a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0019-Fixed-MB-x-relocation-issues.patch b/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0019-Fixed-MB-x-relocation-issues.patch deleted file mode 100644 index 55319ee2..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0019-Fixed-MB-x-relocation-issues.patch +++ /dev/null @@ -1,373 +0,0 @@ -From 616031595c692c2181c3b1ce8c08678b68b2fe4e Mon Sep 17 00:00:00 2001 -From: Nagaraju Mekala <nmekala@xilix.com> -Date: Fri, 28 Sep 2018 12:04:55 +0530 -Subject: [PATCH] -Fixed MB-x relocation issues -Added imml for required MB-x - instructions - -Signed-off-by: Mahesh Bodapati <mbodapat@xilinx.com> -Signed-off-by: Nagaraju Mekala <nagaraju.mekala@xilinx.com> - ---- - bfd/elf64-microblaze.c | 68 ++++++++++++++++---- - gas/config/tc-microblaze.c | 152 ++++++++++++++++++++++++++++++++------------- - gas/tc.h | 2 +- - 3 files changed, 167 insertions(+), 55 deletions(-) - -diff --git a/bfd/elf64-microblaze.c b/bfd/elf64-microblaze.c -index 56a45f2..54a2461 100644 ---- a/bfd/elf64-microblaze.c -+++ b/bfd/elf64-microblaze.c -@@ -1476,8 +1476,17 @@ microblaze_elf_relocate_section (bfd *output_bfd, - relocation -= (input_section->output_section->vma - + input_section->output_offset - + offset + INST_WORD_SIZE); -- bfd_put_16 (input_bfd, (relocation >> 16) & 0xffff, -+ unsigned long insn = bfd_get_32 (input_bfd, contents + offset +endian); -+ if (insn == 0xb2000000 || insn == 0xb2ffffff) -+ { -+ insn &= ~0x00ffffff; -+ insn |= (relocation >> 16) & 0xffffff; -+ bfd_put_32 (input_bfd, insn, - contents + offset + endian); -+ } -+ else -+ bfd_put_16 (input_bfd, (relocation >> 16) & 0xffff, -+ contents + offset + endian); - bfd_put_16 (input_bfd, relocation & 0xffff, - contents + offset + endian + INST_WORD_SIZE); - } -@@ -1567,11 +1576,28 @@ microblaze_elf_relocate_section (bfd *output_bfd, - else - { - if (r_type == R_MICROBLAZE_64_PCREL) -- relocation -= (input_section->output_section->vma -- + input_section->output_offset -- + offset + INST_WORD_SIZE); -- bfd_put_16 (input_bfd, (relocation >> 16) & 0xffff, -+ { -+ if (!input_section->output_section->vma && -+ !input_section->output_offset && !offset) -+ relocation -= (input_section->output_section->vma -+ + input_section->output_offset -+ + offset); -+ else -+ relocation -= (input_section->output_section->vma -+ + input_section->output_offset -+ + offset + INST_WORD_SIZE); -+ } -+ unsigned long insn = bfd_get_32 (input_bfd, contents + offset +endian); -+ if (insn == 0xb2000000 || insn == 0xb2ffffff) -+ { -+ insn &= ~0x00ffffff; -+ insn |= (relocation >> 16) & 0xffffff; -+ bfd_put_32 (input_bfd, insn, - contents + offset + endian); -+ } -+ else -+ bfd_put_16 (input_bfd, (relocation >> 16) & 0xffff, -+ contents + offset + endian); - bfd_put_16 (input_bfd, relocation & 0xffff, - contents + offset + endian + INST_WORD_SIZE); - } -@@ -1690,9 +1716,19 @@ static void - microblaze_bfd_write_imm_value_32 (bfd *abfd, bfd_byte *bfd_addr, bfd_vma val) - { - unsigned long instr = bfd_get_32 (abfd, bfd_addr); -- instr &= ~0x0000ffff; -- instr |= (val & 0x0000ffff); -- bfd_put_32 (abfd, instr, bfd_addr); -+ -+ if (instr == 0xb2000000 || instr == 0xb2ffffff) -+ { -+ instr &= ~0x00ffffff; -+ instr |= (val & 0xffffff); -+ bfd_put_32 (abfd, instr, bfd_addr); -+ } -+ else -+ { -+ instr &= ~0x0000ffff; -+ instr |= (val & 0x0000ffff); -+ bfd_put_32 (abfd, instr, bfd_addr); -+ } - } - - /* Read-modify-write into the bfd, an immediate value into appropriate fields of -@@ -1704,10 +1740,18 @@ microblaze_bfd_write_imm_value_64 (bfd *abfd, bfd_byte *bfd_addr, bfd_vma val) - unsigned long instr_lo; - - instr_hi = bfd_get_32 (abfd, bfd_addr); -- instr_hi &= ~0x0000ffff; -- instr_hi |= ((val >> 16) & 0x0000ffff); -- bfd_put_32 (abfd, instr_hi, bfd_addr); -- -+ if (instr_hi == 0xb2000000 || instr_hi == 0xb2ffffff) -+ { -+ instr_hi &= ~0x00ffffff; -+ instr_hi |= (val >> 16) & 0xffffff; -+ bfd_put_32 (abfd, instr_hi,bfd_addr); -+ } -+ else -+ { -+ instr_hi &= ~0x0000ffff; -+ instr_hi |= ((val >> 16) & 0x0000ffff); -+ bfd_put_32 (abfd, instr_hi, bfd_addr); -+ } - instr_lo = bfd_get_32 (abfd, bfd_addr + INST_WORD_SIZE); - instr_lo &= ~0x0000ffff; - instr_lo |= (val & 0x0000ffff); -diff --git a/gas/config/tc-microblaze.c b/gas/config/tc-microblaze.c -index 587a4d5..fa437b6 100644 ---- a/gas/config/tc-microblaze.c -+++ b/gas/config/tc-microblaze.c -@@ -392,7 +392,7 @@ microblaze_s_weakext (int ignore ATTRIBUTE_UNUSED) - Integer arg to pass to the function. */ - /* If the pseudo-op is not found in this table, it searches in the obj-elf.c, - and then in the read.c table. */ --const pseudo_typeS md_pseudo_table[] = -+pseudo_typeS md_pseudo_table[] = - { - {"lcomm", microblaze_s_lcomm, 1}, - {"data", microblaze_s_data, 0}, -@@ -401,7 +401,7 @@ const pseudo_typeS md_pseudo_table[] = - {"data32", cons, 4}, /* Same as word. */ - {"ent", s_func, 0}, /* Treat ent as function entry point. */ - {"end", microblaze_s_func, 1}, /* Treat end as function end point. */ -- {"gpword", s_rva, 8}, /* gpword label => store resolved label address in data section. */ -+ {"gpword", s_rva, 4}, /* gpword label => store resolved label address in data section. */ - {"gpdword", s_rva, 8}, /* gpword label => store resolved label address in data section. */ - {"weakext", microblaze_s_weakext, 0}, - {"rodata", microblaze_s_rdata, 0}, -@@ -996,7 +996,7 @@ md_assemble (char * str) - unsigned reg2; - unsigned reg3; - unsigned isize; -- unsigned int immed, immed2, temp; -+ unsigned long immed, immed2, temp; - expressionS exp; - char name[20]; - long immedl; -@@ -1118,8 +1118,9 @@ md_assemble (char * str) - as_fatal (_("lmi pseudo instruction should not use a label in imm field")); - else if (streq (name, "smi")) - as_fatal (_("smi pseudo instruction should not use a label in imm field")); -- -- if (reg2 == REG_ROSDP) -+ if(streq (name, "lli") || streq (name, "sli")) -+ opc = str_microblaze_64; -+ else if (reg2 == REG_ROSDP) - opc = str_microblaze_ro_anchor; - else if (reg2 == REG_RWSDP) - opc = str_microblaze_rw_anchor; -@@ -1182,31 +1183,55 @@ md_assemble (char * str) - inst |= (immed << IMM_LOW) & IMM_MASK; - } - } -- else -- { -- temp = immed & 0xFFFF8000; -- if ((temp != 0) && (temp != 0xFFFF8000)) -- { -+ else if (streq (name, "lli") || streq (name, "sli")) -+ { -+ temp = immed & 0xFFFFFF8000; -+ if (temp != 0 && temp != 0xFFFFFF8000) -+ { - /* Needs an immediate inst. */ -- opcode1 = (struct op_code_struct *) hash_find (opcode_hash_control, "imm"); -+ opcode1 = (struct op_code_struct *) hash_find (opcode_hash_control, "imml"); - if (opcode1 == NULL) - { -- as_bad (_("unknown opcode \"%s\""), "imm"); -+ as_bad (_("unknown opcode \"%s\""), "imml"); - return; - } -- - inst1 = opcode1->bit_sequence; -- inst1 |= ((immed & 0xFFFF0000) >> 16) & IMM_MASK; -+ inst1 |= ((immed & 0xFFFFFFFFFFFF0000L) >> 16) & IMML_MASK; - output[0] = INST_BYTE0 (inst1); - output[1] = INST_BYTE1 (inst1); - output[2] = INST_BYTE2 (inst1); - output[3] = INST_BYTE3 (inst1); - output = frag_more (isize); -- } -- inst |= (reg1 << RD_LOW) & RD_MASK; -- inst |= (reg2 << RA_LOW) & RA_MASK; -- inst |= (immed << IMM_LOW) & IMM_MASK; -- } -+ } -+ inst |= (reg1 << RD_LOW) & RD_MASK; -+ inst |= (reg2 << RA_LOW) & RA_MASK; -+ inst |= (immed << IMM_LOW) & IMM_MASK; -+ } -+ else -+ { -+ temp = immed & 0xFFFF8000; -+ if ((temp != 0) && (temp != 0xFFFF8000)) -+ { -+ /* Needs an immediate inst. */ -+ opcode1 = (struct op_code_struct *) hash_find (opcode_hash_control, "imm"); -+ if (opcode1 == NULL) -+ { -+ as_bad (_("unknown opcode \"%s\""), "imm"); -+ return; -+ } -+ -+ inst1 = opcode1->bit_sequence; -+ inst1 |= ((immed & 0xFFFF0000) >> 16) & IMM_MASK; -+ output[0] = INST_BYTE0 (inst1); -+ output[1] = INST_BYTE1 (inst1); -+ output[2] = INST_BYTE2 (inst1); -+ output[3] = INST_BYTE3 (inst1); -+ output = frag_more (isize); -+ } -+ inst |= (reg1 << RD_LOW) & RD_MASK; -+ inst |= (reg2 << RA_LOW) & RA_MASK; -+ inst |= (immed << IMM_LOW) & IMM_MASK; -+ } - break; - - case INST_TYPE_RD_R1_IMMS: -@@ -1832,12 +1857,20 @@ md_assemble (char * str) - case INST_TYPE_IMM: - if (streq (name, "imm")) - as_fatal (_("An IMM instruction should not be present in the .s file")); -- -- op_end = parse_imm (op_end + 1, & exp, MIN_IMM, MAX_IMM); -+ if (microblaze_arch_size == 64) -+ op_end = parse_imml (op_end + 1, & exp, MIN_IMML, MAX_IMML); -+ else -+ op_end = parse_imm (op_end + 1, & exp, MIN_IMM, MAX_IMM); - - if (exp.X_op != O_constant) - { -- char *opc = NULL; -+ char *opc; -+ if (microblaze_arch_size == 64 && (streq (name, "breai") || -+ streq (name, "breaid") || -+ streq (name, "brai") || streq (name, "braid"))) -+ opc = str_microblaze_64; -+ else -+ opc = NULL; - relax_substateT subtype; - - if (exp.X_md != 0) -@@ -1860,27 +1893,54 @@ md_assemble (char * str) - immed = exp.X_add_number; - } - -+ if (microblaze_arch_size == 64 && (streq (name, "breai") || -+ streq (name, "breaid") || -+ streq (name, "brai") || streq (name, "braid"))) -+ { -+ temp = immed & 0xFFFFFF8000; -+ if (temp != 0) -+ { -+ /* Needs an immediate inst. */ -+ opcode1 = (struct op_code_struct *) hash_find (opcode_hash_control, "imml"); -+ if (opcode1 == NULL) -+ { -+ as_bad (_("unknown opcode \"%s\""), "imml"); -+ return; -+ } - -- temp = immed & 0xFFFF8000; -- if ((temp != 0) && (temp != 0xFFFF8000)) -- { -- /* Needs an immediate inst. */ -- opcode1 = (struct op_code_struct *) hash_find (opcode_hash_control, "imm"); -- if (opcode1 == NULL) -- { -- as_bad (_("unknown opcode \"%s\""), "imm"); -- return; -+ inst1 = opcode1->bit_sequence; -+ inst1 |= ((immed & 0xFFFFFFFFFFFF0000L) >> 16) & IMML_MASK; -+ output[0] = INST_BYTE0 (inst1); -+ output[1] = INST_BYTE1 (inst1); -+ output[2] = INST_BYTE2 (inst1); -+ output[3] = INST_BYTE3 (inst1); -+ output = frag_more (isize); - } -+ inst |= (immed << IMM_LOW) & IMM_MASK; -+ } -+ else -+ { -+ temp = immed & 0xFFFF8000; -+ if ((temp != 0) && (temp != 0xFFFF8000)) -+ { -+ /* Needs an immediate inst. */ -+ opcode1 = (struct op_code_struct *) hash_find (opcode_hash_control, "imm"); -+ if (opcode1 == NULL) -+ { -+ as_bad (_("unknown opcode \"%s\""), "imm"); -+ return; -+ } - -- inst1 = opcode1->bit_sequence; -- inst1 |= ((immed & 0xFFFF0000) >> 16) & IMM_MASK; -- output[0] = INST_BYTE0 (inst1); -- output[1] = INST_BYTE1 (inst1); -- output[2] = INST_BYTE2 (inst1); -- output[3] = INST_BYTE3 (inst1); -- output = frag_more (isize); -- } -- inst |= (immed << IMM_LOW) & IMM_MASK; -+ inst1 = opcode1->bit_sequence; -+ inst1 |= ((immed & 0xFFFF0000) >> 16) & IMM_MASK; -+ output[0] = INST_BYTE0 (inst1); -+ output[1] = INST_BYTE1 (inst1); -+ output[2] = INST_BYTE2 (inst1); -+ output[3] = INST_BYTE3 (inst1); -+ output = frag_more (isize); -+ } -+ inst |= (immed << IMM_LOW) & IMM_MASK; -+ } - break; - - case INST_TYPE_NONE: -@@ -2460,7 +2520,7 @@ md_apply_fix (fixS * fixP, - - inst1 = opcode1->bit_sequence; - if (fixP->fx_addsy == NULL || S_IS_DEFINED (fixP->fx_addsy)) -- inst1 |= ((val & 0xFFFFFFFFFFFF0000L) >> 16) & IMML_MASK; -+ inst1 |= ((val & 0xFFFFFF0000L) >> 16) & IMML_MASK; - if (fixP->fx_r_type == BFD_RELOC_MICROBLAZE_64) - fixP->fx_r_type = BFD_RELOC_64; - if (fixP->fx_r_type == BFD_RELOC_MICROBLAZE_64_PCREL) -@@ -2628,7 +2688,14 @@ md_estimate_size_before_relax (fragS * fragP, - } - else - { -- fragP->fr_subtype = UNDEFINED_PC_OFFSET; -+ if (fragP->fr_opcode != NULL) { -+ if (streq (fragP->fr_opcode, str_microblaze_64)) -+ fragP->fr_subtype = DEFINED_64_PC_OFFSET; -+ else -+ fragP->fr_subtype = UNDEFINED_PC_OFFSET; -+ } -+ else -+ fragP->fr_subtype = UNDEFINED_PC_OFFSET; - fragP->fr_var = INST_WORD_SIZE*2; - } - break; -@@ -2905,6 +2972,7 @@ md_parse_option (int c, const char * arg ATTRIBUTE_UNUSED) - case OPTION_M64: - //if (arg != NULL && strcmp (arg, "64") == 0) - microblaze_arch_size = 64; -+ md_pseudo_table[7].poc_val = 8; - break; - default: - return 0; -diff --git a/gas/tc.h b/gas/tc.h -index 0a50a69..529a73b 100644 ---- a/gas/tc.h -+++ b/gas/tc.h -@@ -22,7 +22,7 @@ - /* In theory (mine, at least!) the machine dependent part of the assembler - should only have to include one file. This one. -- JF */ - --extern const pseudo_typeS md_pseudo_table[]; -+extern pseudo_typeS md_pseudo_table[]; - - const char * md_atof (int, char *, int *); - int md_parse_option (int, const char *); diff --git a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0020-Fixing-the-branch-related-issues.patch b/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0020-Fixing-the-branch-related-issues.patch deleted file mode 100644 index 43a06d89..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0020-Fixing-the-branch-related-issues.patch +++ /dev/null @@ -1,25 +0,0 @@ -From 05cac23e0cdb94705c87cf9d94ffe00e7cba53f6 Mon Sep 17 00:00:00 2001 -From: Nagaraju Mekala <nmekala@xilix.com> -Date: Sun, 30 Sep 2018 17:06:58 +0530 -Subject: [PATCH] Fixing the branch related issues - -Signed-off-by: Mahesh Bodapati <mbodapat@xilinx.com> -Signed-off-by: Nagaraju Mekala <nagaraju.mekala@xilinx.com> - ---- - bfd/elf64-microblaze.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/bfd/elf64-microblaze.c b/bfd/elf64-microblaze.c -index 54a2461..e9b3cf3 100644 ---- a/bfd/elf64-microblaze.c -+++ b/bfd/elf64-microblaze.c -@@ -2532,7 +2532,7 @@ microblaze_elf_check_relocs (bfd * abfd, - - /* PR15323, ref flags aren't set for references in the same - object. */ -- h->root.non_ir_ref = 1; -+ h->root.non_ir_ref_regular = 1; - } - - switch (r_type) diff --git a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0021-Fixed-address-computation-issues-with-64bit-address.patch b/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0021-Fixed-address-computation-issues-with-64bit-address.patch deleted file mode 100644 index b3aebb74..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0021-Fixed-address-computation-issues-with-64bit-address.patch +++ /dev/null @@ -1,217 +0,0 @@ -From 8b98898add56667d28b7d6242c86603bb2f5946e Mon Sep 17 00:00:00 2001 -From: Nagaraju Mekala <nmekala@xilix.com> -Date: Tue, 9 Oct 2018 10:14:22 +0530 -Subject: [PATCH] - Fixed address computation issues with 64bit address - Fixed - imml dissassamble issue - -Signed-off-by: Mahesh Bodapati <mbodapat@xilinx.com> -Signed-off-by: Nagaraju Mekala <nagaraju.mekala@xilinx.com> - ---- - bfd/bfd-in2.h | 5 ++++ - bfd/elf64-microblaze.c | 14 ++++----- - gas/config/tc-microblaze.c | 74 +++++++++++++++++++++++++++++++++++++++++----- - opcodes/microblaze-dis.c | 2 +- - 4 files changed, 79 insertions(+), 16 deletions(-) - -diff --git a/bfd/bfd-in2.h b/bfd/bfd-in2.h -index f74aac1..434b41c 100644 ---- a/bfd/bfd-in2.h -+++ b/bfd/bfd-in2.h -@@ -5882,6 +5882,11 @@ done here - only used for relaxing */ - * +done here - only used for relaxing */ - BFD_RELOC_MICROBLAZE_64, - -+/* This is a 64 bit reloc that stores the 32 bit relative -+ * +value in two words (with an imml instruction). No relocation is -+ * +done here - only used for relaxing */ -+ BFD_RELOC_MICROBLAZE_EA64, -+ - /* This is a 64 bit reloc that stores the 32 bit pc relative - * +value in two words (with an imm instruction). No relocation is - * +done here - only used for relaxing */ -diff --git a/bfd/elf64-microblaze.c b/bfd/elf64-microblaze.c -index e9b3cf3..40f10aa 100644 ---- a/bfd/elf64-microblaze.c -+++ b/bfd/elf64-microblaze.c -@@ -121,15 +121,15 @@ static reloc_howto_type microblaze_elf_howto_raw[] = - 0, /* Rightshift. */ - 4, /* Size (0 = byte, 1 = short, 2 = long). */ - 64, /* Bitsize. */ -- TRUE, /* PC_relative. */ -+ FALSE, /* PC_relative. */ - 0, /* Bitpos. */ - complain_overflow_dont, /* Complain on overflow. */ - bfd_elf_generic_reloc,/* Special Function. */ - "R_MICROBLAZE_IMML_64", /* Name. */ - FALSE, /* Partial Inplace. */ - 0, /* Source Mask. */ -- 0x0000ffff, /* Dest Mask. */ -- TRUE), /* PC relative offset? */ -+ 0xffffffffffffff, /* Dest Mask. */ -+ FALSE), /* PC relative offset? */ - - /* A 64 bit relocation. Table entry not really used. */ - HOWTO (R_MICROBLAZE_64, /* Type. */ -@@ -585,9 +585,9 @@ microblaze_elf_reloc_type_lookup (bfd * abfd ATTRIBUTE_UNUSED, - case BFD_RELOC_32: - microblaze_reloc = R_MICROBLAZE_32; - break; -- /* RVA is treated the same as 32 */ -+ /* RVA is treated the same as 64 */ - case BFD_RELOC_RVA: -- microblaze_reloc = R_MICROBLAZE_32; -+ microblaze_reloc = R_MICROBLAZE_IMML_64; - break; - case BFD_RELOC_32_PCREL: - microblaze_reloc = R_MICROBLAZE_32_PCREL; -@@ -619,7 +619,7 @@ microblaze_elf_reloc_type_lookup (bfd * abfd ATTRIBUTE_UNUSED, - case BFD_RELOC_VTABLE_ENTRY: - microblaze_reloc = R_MICROBLAZE_GNU_VTENTRY; - break; -- case BFD_RELOC_MICROBLAZE_64: -+ case BFD_RELOC_MICROBLAZE_EA64: - microblaze_reloc = R_MICROBLAZE_IMML_64; - break; - case BFD_RELOC_MICROBLAZE_64_GOTPC: -@@ -1969,7 +1969,7 @@ microblaze_elf_relax_section (bfd *abfd, - efix = calc_fixup (target_address, 0, sec); - - /* Validate the in-band val. */ -- val = bfd_get_32 (abfd, contents + irel->r_offset); -+ val = bfd_get_64 (abfd, contents + irel->r_offset); - if (val != irel->r_addend && ELF64_R_TYPE (irel->r_info) == R_MICROBLAZE_32_NONE) { - fprintf(stderr, "%d: CORRUPT relax reloc %x %lx\n", __LINE__, val, irel->r_addend); - } -diff --git a/gas/config/tc-microblaze.c b/gas/config/tc-microblaze.c -index fa437b6..46df32e 100644 ---- a/gas/config/tc-microblaze.c -+++ b/gas/config/tc-microblaze.c -@@ -402,7 +402,6 @@ pseudo_typeS md_pseudo_table[] = - {"ent", s_func, 0}, /* Treat ent as function entry point. */ - {"end", microblaze_s_func, 1}, /* Treat end as function end point. */ - {"gpword", s_rva, 4}, /* gpword label => store resolved label address in data section. */ -- {"gpdword", s_rva, 8}, /* gpword label => store resolved label address in data section. */ - {"weakext", microblaze_s_weakext, 0}, - {"rodata", microblaze_s_rdata, 0}, - {"sdata2", microblaze_s_rdata, 1}, -@@ -2482,15 +2481,71 @@ md_apply_fix (fixS * fixP, - /* Don't do anything if the symbol is not defined. */ - if (fixP->fx_addsy == NULL || S_IS_DEFINED (fixP->fx_addsy)) - { -+ if ((fixP->fx_r_type == BFD_RELOC_RVA) && (microblaze_arch_size == 64)) -+ { -+ if (target_big_endian) -+ { -+ buf[0] |= ((val >> 56) & 0xff); -+ buf[1] |= ((val >> 48) & 0xff); -+ buf[2] |= ((val >> 40) & 0xff); -+ buf[3] |= ((val >> 32) & 0xff); -+ buf[4] |= ((val >> 24) & 0xff); -+ buf[5] |= ((val >> 16) & 0xff); -+ buf[6] |= ((val >> 8) & 0xff); -+ buf[7] |= (val & 0xff); -+ } -+ else -+ { -+ buf[7] |= ((val >> 56) & 0xff); -+ buf[6] |= ((val >> 48) & 0xff); -+ buf[5] |= ((val >> 40) & 0xff); -+ buf[4] |= ((val >> 32) & 0xff); -+ buf[3] |= ((val >> 24) & 0xff); -+ buf[2] |= ((val >> 16) & 0xff); -+ buf[1] |= ((val >> 8) & 0xff); -+ buf[0] |= (val & 0xff); -+ } -+ } -+ else { -+ if (target_big_endian) -+ { -+ buf[0] |= ((val >> 24) & 0xff); -+ buf[1] |= ((val >> 16) & 0xff); -+ buf[2] |= ((val >> 8) & 0xff); -+ buf[3] |= (val & 0xff); -+ } -+ else -+ { -+ buf[3] |= ((val >> 24) & 0xff); -+ buf[2] |= ((val >> 16) & 0xff); -+ buf[1] |= ((val >> 8) & 0xff); -+ buf[0] |= (val & 0xff); -+ } -+ } -+ } -+ break; -+ -+ case BFD_RELOC_MICROBLAZE_EA64: -+ /* Don't do anything if the symbol is not defined. */ -+ if (fixP->fx_addsy == NULL || S_IS_DEFINED (fixP->fx_addsy)) -+ { - if (target_big_endian) - { -- buf[0] |= ((val >> 24) & 0xff); -- buf[1] |= ((val >> 16) & 0xff); -- buf[2] |= ((val >> 8) & 0xff); -- buf[3] |= (val & 0xff); -+ buf[0] |= ((val >> 56) & 0xff); -+ buf[1] |= ((val >> 48) & 0xff); -+ buf[2] |= ((val >> 40) & 0xff); -+ buf[3] |= ((val >> 32) & 0xff); -+ buf[4] |= ((val >> 24) & 0xff); -+ buf[5] |= ((val >> 16) & 0xff); -+ buf[6] |= ((val >> 8) & 0xff); -+ buf[7] |= (val & 0xff); - } - else - { -+ buf[7] |= ((val >> 56) & 0xff); -+ buf[6] |= ((val >> 48) & 0xff); -+ buf[5] |= ((val >> 40) & 0xff); -+ buf[4] |= ((val >> 32) & 0xff); - buf[3] |= ((val >> 24) & 0xff); - buf[2] |= ((val >> 16) & 0xff); - buf[1] |= ((val >> 8) & 0xff); -@@ -2611,6 +2666,8 @@ md_apply_fix (fixS * fixP, - fixP->fx_r_type = BFD_RELOC_MICROBLAZE_64_NONE; - else if (fixP->fx_r_type == BFD_RELOC_32) - fixP->fx_r_type = BFD_RELOC_MICROBLAZE_32_NONE; -+ else if(fixP->fx_r_type == BFD_RELOC_MICROBLAZE_EA64) -+ fixP->fx_r_type = BFD_RELOC_MICROBLAZE_EA64; - else - fixP->fx_r_type = BFD_RELOC_NONE; - fixP->fx_addsy = section_symbol (absolute_section); -@@ -2882,6 +2939,7 @@ tc_gen_reloc (asection * section ATTRIBUTE_UNUSED, fixS * fixp) - case BFD_RELOC_MICROBLAZE_32_SYM_OP_SYM: - case BFD_RELOC_MICROBLAZE_64_GOTPC: - case BFD_RELOC_MICROBLAZE_64_GPC: -+ case BFD_RELOC_MICROBLAZE_EA64: - case BFD_RELOC_MICROBLAZE_64: - case BFD_RELOC_MICROBLAZE_64_PCREL: - case BFD_RELOC_MICROBLAZE_64_GOT: -@@ -3027,10 +3085,10 @@ cons_fix_new_microblaze (fragS * frag, - r = BFD_RELOC_32; - break; - case 8: -- if (microblaze_arch_size == 64) -+ /*if (microblaze_arch_size == 64) - r = BFD_RELOC_32; -- else -- r = BFD_RELOC_64; -+ else*/ -+ r = BFD_RELOC_MICROBLAZE_EA64; - break; - default: - as_bad (_("unsupported BFD relocation size %u"), size); -diff --git a/opcodes/microblaze-dis.c b/opcodes/microblaze-dis.c -index 20ea6a8..f679a43 100644 ---- a/opcodes/microblaze-dis.c -+++ b/opcodes/microblaze-dis.c -@@ -61,7 +61,7 @@ get_field_imml (long instr) - { - char tmpstr[25]; - -- sprintf (tmpstr, "%d", (short)((instr & IMML_MASK) >> IMM_LOW)); -+ sprintf (tmpstr, "%d", (int)((instr & IMML_MASK) >> IMM_LOW)); - return (strdup (tmpstr)); - } - diff --git a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0022-Adding-new-relocation-to-support-64bit-rodata.patch b/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0022-Adding-new-relocation-to-support-64bit-rodata.patch deleted file mode 100644 index aec793d9..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0022-Adding-new-relocation-to-support-64bit-rodata.patch +++ /dev/null @@ -1,166 +0,0 @@ -From 3eb0c068ad5a698007341b32c82d9e7ac6cabc49 Mon Sep 17 00:00:00 2001 -From: Nagaraju Mekala <nmekala@xilix.com> -Date: Sat, 13 Oct 2018 21:17:01 +0530 -Subject: [PATCH] Adding new relocation to support 64bit rodata - -Signed-off-by: Mahesh Bodapati <mbodapat@xilinx.com> -Signed-off-by: Nagaraju Mekala <nagaraju.mekala@xilinx.com> - ---- - bfd/elf64-microblaze.c | 11 +++++++++-- - gas/config/tc-microblaze.c | 49 ++++++++++++++++++++++++++++++++++++++++++---- - 2 files changed, 54 insertions(+), 6 deletions(-) - -diff --git a/bfd/elf64-microblaze.c b/bfd/elf64-microblaze.c -index 40f10aa..4d9b906 100644 ---- a/bfd/elf64-microblaze.c -+++ b/bfd/elf64-microblaze.c -@@ -1461,6 +1461,7 @@ microblaze_elf_relocate_section (bfd *output_bfd, - case (int) R_MICROBLAZE_64_PCREL : - case (int) R_MICROBLAZE_64: - case (int) R_MICROBLAZE_32: -+ case (int) R_MICROBLAZE_IMML_64: - { - /* r_symndx will be STN_UNDEF (zero) only for relocs against symbols - from removed linkonce sections, or sections discarded by -@@ -1470,6 +1471,8 @@ microblaze_elf_relocate_section (bfd *output_bfd, - relocation += addend; - if (r_type == R_MICROBLAZE_32)// || r_type == R_MICROBLAZE_IMML_64) - bfd_put_32 (input_bfd, relocation, contents + offset); -+ else if (r_type == R_MICROBLAZE_IMML_64) -+ bfd_put_64 (input_bfd, relocation, contents + offset); - else - { - if (r_type == R_MICROBLAZE_64_PCREL) -@@ -1547,7 +1550,7 @@ microblaze_elf_relocate_section (bfd *output_bfd, - } - else - { -- if (r_type == R_MICROBLAZE_32) -+ if (r_type == R_MICROBLAZE_32 || r_type == R_MICROBLAZE_IMML_64) - { - outrel.r_info = ELF64_R_INFO (0, R_MICROBLAZE_REL); - outrel.r_addend = relocation + addend; -@@ -1573,6 +1576,8 @@ microblaze_elf_relocate_section (bfd *output_bfd, - relocation += addend; - if (r_type == R_MICROBLAZE_32) - bfd_put_32 (input_bfd, relocation, contents + offset); -+ else if (r_type == R_MICROBLAZE_IMML_64) -+ bfd_put_64 (input_bfd, relocation, contents + offset + endian); - else - { - if (r_type == R_MICROBLAZE_64_PCREL) -@@ -2085,7 +2090,8 @@ microblaze_elf_relax_section (bfd *abfd, - microblaze_bfd_write_imm_value_32 (abfd, ocontents + irelscan->r_offset, - irelscan->r_addend); - } -- if (ELF64_R_TYPE (irelscan->r_info) == (int) R_MICROBLAZE_32) -+ if (ELF64_R_TYPE (irelscan->r_info) == (int) R_MICROBLAZE_32 -+ || ELF64_R_TYPE (irelscan->r_info) == (int) R_MICROBLAZE_IMML_64) - { - isym = isymbuf + ELF64_R_SYM (irelscan->r_info); - -@@ -2591,6 +2597,7 @@ microblaze_elf_check_relocs (bfd * abfd, - case R_MICROBLAZE_64: - case R_MICROBLAZE_64_PCREL: - case R_MICROBLAZE_32: -+ case R_MICROBLAZE_IMML_64: - { - if (h != NULL && !bfd_link_pic (info)) - { -diff --git a/gas/config/tc-microblaze.c b/gas/config/tc-microblaze.c -index 46df32e..c6d2e4c 100644 ---- a/gas/config/tc-microblaze.c -+++ b/gas/config/tc-microblaze.c -@@ -1119,6 +1119,13 @@ md_assemble (char * str) - as_fatal (_("smi pseudo instruction should not use a label in imm field")); - if(streq (name, "lli") || streq (name, "sli")) - opc = str_microblaze_64; -+ else if ((microblaze_arch_size == 64) && ((streq (name, "lbui") -+ || streq (name, "lhui") || streq (name, "lwi") || streq (name, "sbi") -+ || streq (name, "shi") || streq (name, "swi")))) -+ { -+ opc = str_microblaze_64; -+ subtype = opcode->inst_offset_type; -+ } - else if (reg2 == REG_ROSDP) - opc = str_microblaze_ro_anchor; - else if (reg2 == REG_RWSDP) -@@ -1182,7 +1189,10 @@ md_assemble (char * str) - inst |= (immed << IMM_LOW) & IMM_MASK; - } - } -- else if (streq (name, "lli") || streq (name, "sli")) -+ else if (streq (name, "lli") || streq (name, "sli") || ((microblaze_arch_size == 64) -+ && ((streq (name, "lbui")) || streq (name, "lhui") -+ || streq (name, "lwi") || streq (name, "sbi") -+ || streq (name, "shi") || streq (name, "swi")))) - { - temp = immed & 0xFFFFFF8000; - if (temp != 0 && temp != 0xFFFFFF8000) -@@ -1794,6 +1804,11 @@ md_assemble (char * str) - - if (exp.X_md != 0) - subtype = get_imm_otype(exp.X_md); -+ else if (streq (name, "brealid") || streq (name, "breaid") || streq (name, "breai")) -+ { -+ opc = str_microblaze_64; -+ subtype = opcode->inst_offset_type; -+ } - else - subtype = opcode->inst_offset_type; - -@@ -1811,6 +1826,31 @@ md_assemble (char * str) - output = frag_more (isize); - immed = exp.X_add_number; - } -+ if (streq (name, "brealid") || streq (name, "breaid") || streq (name, "breai")) -+ { -+ temp = immed & 0xFFFFFF8000; -+ if (temp != 0 && temp != 0xFFFFFF8000) -+ { -+ /* Needs an immediate inst. */ -+ opcode1 = (struct op_code_struct *) hash_find (opcode_hash_control, "imml"); -+ if (opcode1 == NULL) -+ { -+ as_bad (_("unknown opcode \"%s\""), "imml"); -+ return; -+ } -+ inst1 = opcode1->bit_sequence; -+ inst1 |= ((immed & 0xFFFFFFFFFFFF0000L) >> 16) & IMML_MASK; -+ output[0] = INST_BYTE0 (inst1); -+ output[1] = INST_BYTE1 (inst1); -+ output[2] = INST_BYTE2 (inst1); -+ output[3] = INST_BYTE3 (inst1); -+ output = frag_more (isize); -+ } -+ inst |= (reg1 << RD_LOW) & RD_MASK; -+ inst |= (immed << IMM_LOW) & IMM_MASK; -+ } -+ else -+ { - - temp = immed & 0xFFFF8000; - if ((temp != 0) && (temp != 0xFFFF8000)) -@@ -1834,6 +1874,7 @@ md_assemble (char * str) - - inst |= (reg1 << RD_LOW) & RD_MASK; - inst |= (immed << IMM_LOW) & IMM_MASK; -+ } - break; - - case INST_TYPE_R2: -@@ -3085,10 +3126,10 @@ cons_fix_new_microblaze (fragS * frag, - r = BFD_RELOC_32; - break; - case 8: -- /*if (microblaze_arch_size == 64) -- r = BFD_RELOC_32; -- else*/ -+ if (microblaze_arch_size == 64) - r = BFD_RELOC_MICROBLAZE_EA64; -+ else -+ r = BFD_RELOC_64; - break; - default: - as_bad (_("unsupported BFD relocation size %u"), size); diff --git a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0023-fixing-the-.bss-relocation-issue.patch b/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0023-fixing-the-.bss-relocation-issue.patch deleted file mode 100644 index cd54cae4..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0023-fixing-the-.bss-relocation-issue.patch +++ /dev/null @@ -1,76 +0,0 @@ -From 52f6c56353aad424dfdaf713e0192f8fc9c874f4 Mon Sep 17 00:00:00 2001 -From: Nagaraju Mekala <nmekala@xilix.com> -Date: Wed, 24 Oct 2018 12:34:37 +0530 -Subject: [PATCH] fixing the .bss relocation issue - -Signed-off-by: Mahesh Bodapati <mbodapat@xilinx.com> -Signed-off-by: Nagaraju Mekala <nagaraju.mekala@xilinx.com> - ---- - bfd/elf64-microblaze.c | 18 ++++++++++++------ - 1 file changed, 12 insertions(+), 6 deletions(-) - -diff --git a/bfd/elf64-microblaze.c b/bfd/elf64-microblaze.c -index 4d9b906..184b7d5 100644 ---- a/bfd/elf64-microblaze.c -+++ b/bfd/elf64-microblaze.c -@@ -1480,7 +1480,7 @@ microblaze_elf_relocate_section (bfd *output_bfd, - + input_section->output_offset - + offset + INST_WORD_SIZE); - unsigned long insn = bfd_get_32 (input_bfd, contents + offset +endian); -- if (insn == 0xb2000000 || insn == 0xb2ffffff) -+ if ((insn & 0xff000000) == 0xb2000000) - { - insn &= ~0x00ffffff; - insn |= (relocation >> 16) & 0xffffff; -@@ -1593,7 +1593,7 @@ microblaze_elf_relocate_section (bfd *output_bfd, - + offset + INST_WORD_SIZE); - } - unsigned long insn = bfd_get_32 (input_bfd, contents + offset +endian); -- if (insn == 0xb2000000 || insn == 0xb2ffffff) -+ if ((insn & 0xff000000) == 0xb2000000) - { - insn &= ~0x00ffffff; - insn |= (relocation >> 16) & 0xffffff; -@@ -1722,7 +1722,7 @@ microblaze_bfd_write_imm_value_32 (bfd *abfd, bfd_byte *bfd_addr, bfd_vma val) - { - unsigned long instr = bfd_get_32 (abfd, bfd_addr); - -- if (instr == 0xb2000000 || instr == 0xb2ffffff) -+ if ((instr & 0xff000000) == 0xb2000000) - { - instr &= ~0x00ffffff; - instr |= (val & 0xffffff); -@@ -1745,7 +1745,7 @@ microblaze_bfd_write_imm_value_64 (bfd *abfd, bfd_byte *bfd_addr, bfd_vma val) - unsigned long instr_lo; - - instr_hi = bfd_get_32 (abfd, bfd_addr); -- if (instr_hi == 0xb2000000 || instr_hi == 0xb2ffffff) -+ if ((instr_hi & 0xff000000) == 0xb2000000) - { - instr_hi &= ~0x00ffffff; - instr_hi |= (val >> 16) & 0xffffff; -@@ -2238,7 +2238,10 @@ microblaze_elf_relax_section (bfd *abfd, - unsigned long instr_lo = bfd_get_32 (abfd, ocontents - + irelscan->r_offset - + INST_WORD_SIZE); -- immediate = (instr_hi & 0x0000ffff) << 16; -+ if ((instr_hi & 0xff000000) == 0xb2000000) -+ immediate = (instr_hi & 0x00ffffff) << 24; -+ else -+ immediate = (instr_hi & 0x0000ffff) << 16; - immediate |= (instr_lo & 0x0000ffff); - offset = calc_fixup (irelscan->r_addend, 0, sec); - immediate -= offset; -@@ -2282,7 +2285,10 @@ microblaze_elf_relax_section (bfd *abfd, - unsigned long instr_lo = bfd_get_32 (abfd, ocontents - + irelscan->r_offset - + INST_WORD_SIZE); -- immediate = (instr_hi & 0x0000ffff) << 16; -+ if ((instr_hi & 0xff000000) == 0xb2000000) -+ immediate = (instr_hi & 0x00ffffff) << 24; -+ else -+ immediate = (instr_hi & 0x0000ffff) << 16; - immediate |= (instr_lo & 0x0000ffff); - target_address = immediate; - offset = calc_fixup (target_address, 0, sec); diff --git a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0024-Fixed-the-bug-in-the-R_MICROBLAZE_64_NONE-relocation.patch b/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0024-Fixed-the-bug-in-the-R_MICROBLAZE_64_NONE-relocation.patch deleted file mode 100644 index a4f8257d..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0024-Fixed-the-bug-in-the-R_MICROBLAZE_64_NONE-relocation.patch +++ /dev/null @@ -1,44 +0,0 @@ -From ed3e6fad3e2a626fc987e9c7477f51d03d2b4512 Mon Sep 17 00:00:00 2001 -From: Nagaraju Mekala <nmekala@xilix.com> -Date: Wed, 28 Nov 2018 14:00:29 +0530 -Subject: [PATCH] Fixed the bug in the R_MICROBLAZE_64_NONE relocation. It was - adjusting only lower 16bits. - -Signed-off-by: Mahesh Bodapati <mbodapat@xilinx.com> -Signed-off-by: Nagaraju Mekala <nagaraju.mekala@xilinx.com> - ---- - bfd/elf32-microblaze.c | 4 ++-- - bfd/elf64-microblaze.c | 4 ++-- - 2 files changed, 4 insertions(+), 4 deletions(-) - -diff --git a/bfd/elf32-microblaze.c b/bfd/elf32-microblaze.c -index 035e71f..2d8c062 100644 ---- a/bfd/elf32-microblaze.c -+++ b/bfd/elf32-microblaze.c -@@ -2022,8 +2022,8 @@ microblaze_elf_relax_section (bfd *abfd, - sfix = calc_fixup (irel->r_offset + INST_WORD_SIZE, 0, sec); - efix = calc_fixup (target_address, 0, sec); - irel->r_addend -= (efix - sfix); -- microblaze_bfd_write_imm_value_32 (abfd, contents + irel->r_offset -- + INST_WORD_SIZE, irel->r_addend); -+ microblaze_bfd_write_imm_value_64 (abfd, contents + irel->r_offset, -+ irel->r_addend); - } - break; - } -diff --git a/bfd/elf64-microblaze.c b/bfd/elf64-microblaze.c -index 184b7d5..ef6a870 100644 ---- a/bfd/elf64-microblaze.c -+++ b/bfd/elf64-microblaze.c -@@ -2017,8 +2017,8 @@ microblaze_elf_relax_section (bfd *abfd, - sfix = calc_fixup (irel->r_offset + INST_WORD_SIZE, 0, sec); - efix = calc_fixup (target_address, 0, sec); - irel->r_addend -= (efix - sfix); -- microblaze_bfd_write_imm_value_32 (abfd, contents + irel->r_offset -- + INST_WORD_SIZE, irel->r_addend); -+ microblaze_bfd_write_imm_value_64 (abfd, contents + irel->r_offset, -+ irel->r_addend); - } - break; - } diff --git a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0025-Patch-MicroBlaze-fixed-Build-issue-which-are-due-to-.patch b/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0025-Patch-MicroBlaze-fixed-Build-issue-which-are-due-to-.patch deleted file mode 100644 index fec19b6b..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0025-Patch-MicroBlaze-fixed-Build-issue-which-are-due-to-.patch +++ /dev/null @@ -1,67 +0,0 @@ -From b8bd638f71649980e114548d8eeecba34683af42 Mon Sep 17 00:00:00 2001 -From: Mahesh Bodapati <mbodapat@xilinx.com> -Date: Sun, 2 Dec 2018 14:49:14 +0530 -Subject: [PATCH] fixed Build issue which are due to conflicts in patches. - -Signed-off-by: Mahesh Bodapati <mbodapat@xilinx.com> -Signed-off-by: Nagaraju Mekala <nagaraju.mekala@xilinx.com> - ---- - bfd/elf32-microblaze.c | 1 + - bfd/elf64-microblaze.c | 12 ++++++------ - gas/config/tc-microblaze.c | 4 ++-- - 3 files changed, 9 insertions(+), 8 deletions(-) - -diff --git a/bfd/elf32-microblaze.c b/bfd/elf32-microblaze.c -index 2d8c062..6a795c5 100644 ---- a/bfd/elf32-microblaze.c -+++ b/bfd/elf32-microblaze.c -@@ -1996,6 +1996,7 @@ microblaze_elf_relax_section (bfd *abfd, - /* This was a PC-relative instruction that was - completely resolved. */ - int sfix, efix; -+ unsigned int val; - bfd_vma target_address; - target_address = irel->r_addend + irel->r_offset; - sfix = calc_fixup (irel->r_offset, 0, sec); -diff --git a/bfd/elf64-microblaze.c b/bfd/elf64-microblaze.c -index ef6a870..bed534e 100644 ---- a/bfd/elf64-microblaze.c -+++ b/bfd/elf64-microblaze.c -@@ -2854,14 +2854,14 @@ microblaze_elf_adjust_dynamic_symbol (struct bfd_link_info *info, - /* If this is a weak symbol, and there is a real definition, the - processor independent code will have arranged for us to see the - real definition first, and we can just use the same value. */ -- if (h->u.weakdef != NULL) -+ if (h->is_weakalias) - { -- BFD_ASSERT (h->u.weakdef->root.type == bfd_link_hash_defined -- || h->u.weakdef->root.type == bfd_link_hash_defweak); -- h->root.u.def.section = h->u.weakdef->root.u.def.section; -- h->root.u.def.value = h->u.weakdef->root.u.def.value; -+ struct elf_link_hash_entry *def = weakdef (h); -+ BFD_ASSERT (def->root.type == bfd_link_hash_defined); -+ h->root.u.def.section = def->root.u.def.section; -+ h->root.u.def.value = def->root.u.def.value; - return TRUE; -- } -+ } - - /* This is a reference to a symbol defined by a dynamic object which - is not a function. */ -diff --git a/gas/config/tc-microblaze.c b/gas/config/tc-microblaze.c -index c6d2e4c..b3e49f0 100644 ---- a/gas/config/tc-microblaze.c -+++ b/gas/config/tc-microblaze.c -@@ -118,9 +118,9 @@ const relax_typeS md_relax_table[] = - { 0x7fffffff, 0x80000000, INST_WORD_SIZE*2, 0 }, /* 15: TLSGOTTPREL_OFFSET. */ - { 0x7fffffff, 0x80000000, INST_WORD_SIZE*2, 0 }, /* 16: TLSTPREL_OFFSET. */ - { 0x7fffffff, 0x80000000, INST_WORD_SIZE*2, 0 }, /* 17: TEXT_OFFSET. */ -- { 0x7fffffff, 0x80000000, INST_WORD_SIZE*2, 0 } /* 18: TEXT_PC_OFFSET. */ -+ { 0x7fffffff, 0x80000000, INST_WORD_SIZE*2, 0 }, /* 18: TEXT_PC_OFFSET. */ - // { 0x7fffffff, 0x80000000, INST_WORD_SIZE*2, 0 } /* 16: TLSTPREL_OFFSET. */ -- { 0x7fffffffffffffff, 0x8000000000000000, INST_WORD_SIZE, 0 } /* 19: DEFINED_64_OFFSET. */ -+ { 0x7fffffffffffffff, 0x8000000000000000, INST_WORD_SIZE, 0 }, /* 19: DEFINED_64_OFFSET. */ - { 0x7fffffffffffffff, 0x8000000000000000, INST_WORD_SIZE*2, 0 } /* 20: DEFINED_64_PC_OFFSET. */ - }; - diff --git a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0026-Patch-Microblaze-changes-of-PR22458-failure-to-choos.patch b/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0026-Patch-Microblaze-changes-of-PR22458-failure-to-choos.patch deleted file mode 100644 index cd6965d7..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0026-Patch-Microblaze-changes-of-PR22458-failure-to-choos.patch +++ /dev/null @@ -1,31 +0,0 @@ -From cbe98e5a0cbc2337bf25d6b3f9dabcae38b95952 Mon Sep 17 00:00:00 2001 -From: Mahesh Bodapati <mbodapat@xilinx.com> -Date: Tue, 26 Feb 2019 17:31:41 +0530 -Subject: [PATCH] changes of "PR22458, failure to choose a matching ELF target" - is causing "Multiple Prevailing definition errors",added check for best_match - elf. - -Signed-off-by: Mahesh Bodapati <mbodapat@xilinx.com> -Signed-off-by: Nagaraju Mekala <nagaraju.mekala@xilinx.com> - ---- - bfd/format.c | 5 +++++ - 1 file changed, 5 insertions(+) - -diff --git a/bfd/format.c b/bfd/format.c -index 97a9229..3a74cc4 100644 ---- a/bfd/format.c -+++ b/bfd/format.c -@@ -292,7 +292,12 @@ bfd_check_format_matches (bfd *abfd, bfd_format format, char ***matching) - - /* Don't check the default target twice. */ - if (*target == &binary_vec -+#if !BFD_SUPPORTS_PLUGINS - || (!abfd->target_defaulted && *target == save_targ)) -+#else -+ || (!abfd->target_defaulted && *target == save_targ) -+ || (*target)->match_priority > best_match) -+#endif - continue; - - /* If we already tried a match, the bfd is modified and may diff --git a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0029-Patch-Microblaze-Binutils-security-check-is-causing-.patch b/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0029-Patch-Microblaze-Binutils-security-check-is-causing-.patch deleted file mode 100644 index f293f5cf..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0029-Patch-Microblaze-Binutils-security-check-is-causing-.patch +++ /dev/null @@ -1,33 +0,0 @@ -From b1e425aed65150d7ce9ddb119f4b94969fe4043e Mon Sep 17 00:00:00 2001 -From: Mahesh Bodapati <mbodapat@xilinx.com> -Date: Mon, 11 Mar 2019 14:23:58 +0530 -Subject: [PATCH] Binutils security check is causing build error for windows - builds.commenting for now. - -Signed-off-by: Mahesh Bodapati <mbodapat@xilinx.com> -Signed-off-by: Nagaraju Mekala <nagaraju.mekala@xilinx.com> - ---- - bfd/elf-attrs.c | 2 ++ - 1 file changed, 2 insertions(+) - -diff --git a/bfd/elf-attrs.c b/bfd/elf-attrs.c -index bfe135e..feb5cb3 100644 ---- a/bfd/elf-attrs.c -+++ b/bfd/elf-attrs.c -@@ -440,6 +440,7 @@ _bfd_elf_parse_attributes (bfd *abfd, Elf_Internal_Shdr * hdr) - /* PR 17512: file: 2844a11d. */ - if (hdr->sh_size == 0) - return; -+ #if 0 - if (hdr->sh_size > bfd_get_file_size (abfd)) - { - /* xgettext:c-format */ -@@ -448,6 +449,7 @@ _bfd_elf_parse_attributes (bfd *abfd, Elf_Internal_Shdr * hdr) - bfd_set_error (bfd_error_invalid_operation); - return; - } -+ #endif - - contents = (bfd_byte *) bfd_malloc (hdr->sh_size + 1); - if (!contents) diff --git a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0030-fixing-the-long-long-long-mingw-toolchain-issue.patch b/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0030-fixing-the-long-long-long-mingw-toolchain-issue.patch deleted file mode 100644 index 7e3accad..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0030-fixing-the-long-long-long-mingw-toolchain-issue.patch +++ /dev/null @@ -1,57 +0,0 @@ -From 1eec84c155aeaeead673310f83293853f01b578d Mon Sep 17 00:00:00 2001 -From: Nagaraju Mekala <nmekala@xilix.com> -Date: Thu, 29 Nov 2018 17:59:25 +0530 -Subject: [PATCH] fixing the long & long long mingw toolchain issue - -Signed-off-by: Mahesh Bodapati <mbodapat@xilinx.com> -Signed-off-by: Nagaraju Mekala <nagaraju.mekala@xilinx.com> - ---- - gas/config/tc-microblaze.c | 10 +++++----- - opcodes/microblaze-opc.h | 4 ++-- - 2 files changed, 7 insertions(+), 7 deletions(-) - -diff --git a/gas/config/tc-microblaze.c b/gas/config/tc-microblaze.c -index b3e49f0..5b506d3 100644 ---- a/gas/config/tc-microblaze.c -+++ b/gas/config/tc-microblaze.c -@@ -783,7 +783,7 @@ parse_imm (char * s, expressionS * e, offsetT min, offsetT max) - } - - static char * --parse_imml (char * s, expressionS * e, long min, long max) -+parse_imml (char * s, expressionS * e, long long min, long long max) - { - char *new_pointer; - char *atp; -@@ -834,11 +834,11 @@ parse_imml (char * s, expressionS * e, long min, long max) - ; /* An error message has already been emitted. */ - else if ((e->X_op != O_constant && e->X_op != O_symbol) ) - as_fatal (_("operand must be a constant or a label")); -- else if ((e->X_op == O_constant) && ((long) e->X_add_number < min -- || (long) e->X_add_number > max)) -+ else if ((e->X_op == O_constant) && ((long long) e->X_add_number < min -+ || (long long) e->X_add_number > max)) - { -- as_fatal (_("operand must be absolute in range %ld..%ld, not %ld"), -- min, max, (long) e->X_add_number); -+ as_fatal (_("operand must be absolute in range %lld..%lld, not %lld"), -+ min, max, (long long) e->X_add_number); - } - - if (atp) -diff --git a/opcodes/microblaze-opc.h b/opcodes/microblaze-opc.h -index 824afc0..d59ee0a 100644 ---- a/opcodes/microblaze-opc.h -+++ b/opcodes/microblaze-opc.h -@@ -585,8 +585,8 @@ char pvr_register_prefix[] = "rpvr"; - #define MIN_IMM6_WIDTH ((int) 0x00000001) - #define MAX_IMM6_WIDTH ((int) 0x00000040) - --#define MIN_IMML ((long) 0xffffff8000000000L) --#define MAX_IMML ((long) 0x0000007fffffffffL) -+#define MIN_IMML ((long long) 0xffffff8000000000L) -+#define MAX_IMML ((long long) 0x0000007fffffffffL) - - #endif /* MICROBLAZE_OPC */ - diff --git a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0031-fixing-the-_STACK_SIZE-issue-with-the-flto-flag.patch b/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0031-fixing-the-_STACK_SIZE-issue-with-the-flto-flag.patch deleted file mode 100644 index 8c54f761..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.32/0031-fixing-the-_STACK_SIZE-issue-with-the-flto-flag.patch +++ /dev/null @@ -1,55 +0,0 @@ -From e28b33db95e6b71afe2eaca9d7090b3bfc20f08e Mon Sep 17 00:00:00 2001 -From: Nagaraju <nmekala@xilinx.com> -Date: Wed, 20 Mar 2019 11:42:07 +0530 -Subject: [PATCH] fixing the _STACK_SIZE issue with the flto flag - -Signed-off-by: Nagaraju Mekala <nagaraju.mekala@xilinx.com> - ---- - ld/scripttempl/elfmicroblaze.sc | 12 ++++++------ - 1 file changed, 6 insertions(+), 6 deletions(-) - -diff --git a/ld/scripttempl/elfmicroblaze.sc b/ld/scripttempl/elfmicroblaze.sc -index 30b9c28..6be0f4e 100644 ---- a/ld/scripttempl/elfmicroblaze.sc -+++ b/ld/scripttempl/elfmicroblaze.sc -@@ -63,9 +63,9 @@ ${RELOCATING+${LIB_SEARCH_DIRS}} - - ${RELOCATING+ENTRY (${ENTRY})} - --${RELOCATING+_TEXT_START_ADDR = DEFINED(_TEXT_START_ADDR) ? _TEXT_START_ADDR : 0x50; --_HEAP_SIZE = DEFINED(_HEAP_SIZE) ? _HEAP_SIZE : 0x0; --_STACK_SIZE = DEFINED(_STACK_SIZE) ? _STACK_SIZE : 0x400;} -+${RELOCATING+_DEF_TEXT_START_ADDR = DEFINED(_TEXT_START_ADDR) ? _TEXT_START_ADDR : 0x50; -+_DEF_HEAP_SIZE = DEFINED(_HEAP_SIZE) ? _HEAP_SIZE : 0x0; -+_DEF_STACK_SIZE = DEFINED(_STACK_SIZE) ? _STACK_SIZE : 0x400;} - - SECTIONS - { -@@ -75,7 +75,7 @@ SECTIONS - .vectors.debug_sw_break 0x18 : { KEEP (*(.vectors.debug_sw_break)) } = 0 - .vectors.hw_exception 0x20 : { KEEP (*(.vectors.hw_exception)) } = 0 - -- ${RELOCATING+. = _TEXT_START_ADDR;} -+ ${RELOCATING+. = _DEF_TEXT_START_ADDR;} - - ${RELOCATING+ _ftext = .;} - .text : { -@@ -207,7 +207,7 @@ SECTIONS - .heap : { - ${RELOCATING+ _heap = .;} - ${RELOCATING+ _heap_start = .;} -- ${RELOCATING+ . += _HEAP_SIZE;} -+ ${RELOCATING+ . += _DEF_HEAP_SIZE;} - ${RELOCATING+ _heap_end = .;} - } - -@@ -215,7 +215,7 @@ SECTIONS - - .stack : { - ${RELOCATING+ _stack_end = .;} -- ${RELOCATING+ . += _STACK_SIZE;} -+ ${RELOCATING+ . += _DEF_STACK_SIZE;} - ${RELOCATING+ . = ALIGN(. != 0 ? 8 : 1);} - ${RELOCATING+ _stack = .;} - ${RELOCATING+ _end = .;} diff --git a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0001-LOCAL-Testsuite-builtins-tests-require-fpic.patch b/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0001-LOCAL-Testsuite-builtins-tests-require-fpic.patch deleted file mode 100644 index 5d29531d..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0001-LOCAL-Testsuite-builtins-tests-require-fpic.patch +++ /dev/null @@ -1,35 +0,0 @@ -From 7fbf19ba660c72a1d4817780cad5c4ae52cbe0b5 Mon Sep 17 00:00:00 2001 -From: Mahesh Bodapati <mbodapat@xilinx.com> -Date: Wed, 11 Jan 2017 13:13:57 +0530 -Subject: [PATCH 01/54] LOCAL]: Testsuite - builtins tests require fpic - Signed-off-by: David Holsgrove <david.holsgrove@xilinx.com> - -Conflicts: - - gcc/testsuite/gcc.c-torture/execute/builtins/builtins.exp ---- - gcc/testsuite/gcc.c-torture/execute/builtins/builtins.exp | 8 ++++++++ - 1 file changed, 8 insertions(+) - -diff --git a/gcc/testsuite/gcc.c-torture/execute/builtins/builtins.exp b/gcc/testsuite/gcc.c-torture/execute/builtins/builtins.exp -index 9f0b24a..1cb4f97 100644 ---- a/gcc/testsuite/gcc.c-torture/execute/builtins/builtins.exp -+++ b/gcc/testsuite/gcc.c-torture/execute/builtins/builtins.exp -@@ -48,6 +48,14 @@ if { [istarget *-*-eabi*] - lappend additional_flags "-Wl,--allow-multiple-definition" - } - -+<<<<<<< HEAD -+======= -+if [istarget "microblaze*-*-linux*"] { -+ lappend additional_flags "-Wl,-zmuldefs" -+ lappend additional_flags "-fPIC" -+} -+ -+>>>>>>> 6ef6e5b... [LOCAL]: Testsuite - builtins tests require fpic - foreach src [lsort [find $srcdir/$subdir *.c]] { - if {![string match *-lib.c $src] && [runtest_file_p $runtests $src]} { - c-torture-execute [list $src \ --- -2.7.4 - diff --git a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0002-LOCAL-Quick-fail-g-.dg-opt-memcpy1.C.patch b/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0002-LOCAL-Quick-fail-g-.dg-opt-memcpy1.C.patch deleted file mode 100644 index 503b1ecf..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0002-LOCAL-Quick-fail-g-.dg-opt-memcpy1.C.patch +++ /dev/null @@ -1,31 +0,0 @@ -From 4b675eeabceea22ec51abfa7c37e11a631e58659 Mon Sep 17 00:00:00 2001 -From: Mahesh Bodapati <mbodapat@xilinx.com> -Date: Wed, 11 Jan 2017 14:31:10 +0530 -Subject: [PATCH 02/54] [LOCAL]: Quick fail g++.dg/opt/memcpy1.C This - particular testcase fails with a timeout. Instead, fail it at compile-time - for microblaze. This speeds up the testsuite without removing it from the - FAIL reports. - -Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> ---- - gcc/testsuite/g++.dg/opt/memcpy1.C | 4 ++++ - 1 file changed, 4 insertions(+) - -diff --git a/gcc/testsuite/g++.dg/opt/memcpy1.C b/gcc/testsuite/g++.dg/opt/memcpy1.C -index 66411cd..d951fee 100644 ---- a/gcc/testsuite/g++.dg/opt/memcpy1.C -+++ b/gcc/testsuite/g++.dg/opt/memcpy1.C -@@ -4,6 +4,10 @@ - // { dg-do compile } - // { dg-options "-O" } - -+#if defined (__MICROBLAZE__) -+#error "too slow on mb. Investigate." -+#endif -+ - typedef unsigned char uint8_t; - typedef uint8_t uint8; - __extension__ typedef __SIZE_TYPE__ size_t; --- -2.7.4 - diff --git a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0003-LOCAL-Testsuite-explicitly-add-fivopts-for-tests-tha.patch b/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0003-LOCAL-Testsuite-explicitly-add-fivopts-for-tests-tha.patch deleted file mode 100644 index 39058496..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0003-LOCAL-Testsuite-explicitly-add-fivopts-for-tests-tha.patch +++ /dev/null @@ -1,116 +0,0 @@ -From 03d4d7335be2b2f72c199ab5177685b6dfd1a9d6 Mon Sep 17 00:00:00 2001 -From: Mahesh Bodapati <mbodapat@xilinx.com> -Date: Wed, 11 Jan 2017 15:28:38 +0530 -Subject: [PATCH 03/54] [LOCAL]: Testsuite - explicitly add -fivopts for tests - that depend on it (test gcc/testsuite/gcc.dg/tree-ssa/ivopts-lt.c doesnt - exist in 4.6 branch) - -Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> ---- - gcc/testsuite/g++.dg/tree-ssa/ivopts-2.C | 2 +- - gcc/testsuite/g++.dg/tree-ssa/ivopts-3.C | 2 +- - gcc/testsuite/gcc.dg/tree-ssa/loop-2.c | 2 +- - gcc/testsuite/gcc.dg/tree-ssa/loop-4.c | 2 +- - gcc/testsuite/gcc.dg/tree-ssa/loop-5.c | 2 +- - gcc/testsuite/gcc.dg/tree-ssa/pr19210-1.c | 2 +- - gcc/testsuite/gcc.dg/tree-ssa/pr19590.c | 2 +- - gcc/testsuite/gcc.dg/tree-ssa/reassoc-19.c | 2 +- - 8 files changed, 8 insertions(+), 8 deletions(-) - -diff --git a/gcc/testsuite/g++.dg/tree-ssa/ivopts-2.C b/gcc/testsuite/g++.dg/tree-ssa/ivopts-2.C -index 438db88..ede883e 100644 ---- a/gcc/testsuite/g++.dg/tree-ssa/ivopts-2.C -+++ b/gcc/testsuite/g++.dg/tree-ssa/ivopts-2.C -@@ -1,5 +1,5 @@ - /* { dg-do compile { target { i?86-*-* x86_64-*-* } } } */ --/* { dg-options "-O2 -fdump-tree-ivopts-details" } */ -+/* { dg-options "-O2 -fivopts -fdump-tree-ivopts-details" } */ - - void test (int *b, int *e, int stride) - { -diff --git a/gcc/testsuite/g++.dg/tree-ssa/ivopts-3.C b/gcc/testsuite/g++.dg/tree-ssa/ivopts-3.C -index 07ff1b7..a09710c 100644 ---- a/gcc/testsuite/g++.dg/tree-ssa/ivopts-3.C -+++ b/gcc/testsuite/g++.dg/tree-ssa/ivopts-3.C -@@ -1,5 +1,5 @@ - // { dg-do compile } --// { dg-options "-O2 -fdump-tree-ivopts-details" } -+// { dg-options "-O2 -fivopts -fdump-tree-ivopts-details" } - - class MinimalVec3 - { -diff --git a/gcc/testsuite/gcc.dg/tree-ssa/loop-2.c b/gcc/testsuite/gcc.dg/tree-ssa/loop-2.c -index bda2516..22c8a5d 100644 ---- a/gcc/testsuite/gcc.dg/tree-ssa/loop-2.c -+++ b/gcc/testsuite/gcc.dg/tree-ssa/loop-2.c -@@ -1,7 +1,7 @@ - /* A test for strength reduction and induction variable elimination. */ - - /* { dg-do compile } */ --/* { dg-options "-O1 -fdump-tree-optimized" } */ -+/* { dg-options "-O1 -fivopts -fdump-tree-optimized" } */ - /* { dg-require-effective-target size32plus } */ - - /* Size of this structure should be sufficiently weird so that no memory -diff --git a/gcc/testsuite/gcc.dg/tree-ssa/loop-4.c b/gcc/testsuite/gcc.dg/tree-ssa/loop-4.c -index f0770ab..65d74c8 100644 ---- a/gcc/testsuite/gcc.dg/tree-ssa/loop-4.c -+++ b/gcc/testsuite/gcc.dg/tree-ssa/loop-4.c -@@ -1,7 +1,7 @@ - /* A test for strength reduction and induction variable elimination. */ - - /* { dg-do compile } */ --/* { dg-options "-O1 -fdump-tree-optimized" } */ -+/* { dg-options "-O1 -fivopts -fdump-tree-optimized" } */ - /* { dg-require-effective-target size32plus } */ - - /* Size of this structure should be sufficiently weird so that no memory -diff --git a/gcc/testsuite/gcc.dg/tree-ssa/loop-5.c b/gcc/testsuite/gcc.dg/tree-ssa/loop-5.c -index 5f42857..9bc86ee 100644 ---- a/gcc/testsuite/gcc.dg/tree-ssa/loop-5.c -+++ b/gcc/testsuite/gcc.dg/tree-ssa/loop-5.c -@@ -1,7 +1,7 @@ - /* A test for induction variable merging. */ - - /* { dg-do compile } */ --/* { dg-options "-O1 -fdump-tree-optimized" } */ -+/* { dg-options "-O1 -fivopts -fdump-tree-optimized" } */ - - void foo(long); - -diff --git a/gcc/testsuite/gcc.dg/tree-ssa/pr19210-1.c b/gcc/testsuite/gcc.dg/tree-ssa/pr19210-1.c -index 0fa5600..94caa44 100644 ---- a/gcc/testsuite/gcc.dg/tree-ssa/pr19210-1.c -+++ b/gcc/testsuite/gcc.dg/tree-ssa/pr19210-1.c -@@ -1,5 +1,5 @@ - /* { dg-do compile } */ --/* { dg-options "-O2 -fopt-info-loop-missed -Wunsafe-loop-optimizations" } */ -+/* { dg-options "-O2 -fivopts -fopt-info-loop-missed -Wunsafe-loop-optimizations" } */ - extern void g(void); - - void -diff --git a/gcc/testsuite/gcc.dg/tree-ssa/pr19590.c b/gcc/testsuite/gcc.dg/tree-ssa/pr19590.c -index 2c6cfc6..648e6e6 100644 ---- a/gcc/testsuite/gcc.dg/tree-ssa/pr19590.c -+++ b/gcc/testsuite/gcc.dg/tree-ssa/pr19590.c -@@ -1,5 +1,5 @@ - /* { dg-do compile } */ --/* { dg-options "-O2 -fdump-tree-ivopts" } */ -+/* { dg-options "-O2 -fivopts -fdump-tree-ivopts" } */ - - void vnum_test8(int *data) - { -diff --git a/gcc/testsuite/gcc.dg/tree-ssa/reassoc-19.c b/gcc/testsuite/gcc.dg/tree-ssa/reassoc-19.c -index e911bfc..5d3e7e0 100644 ---- a/gcc/testsuite/gcc.dg/tree-ssa/reassoc-19.c -+++ b/gcc/testsuite/gcc.dg/tree-ssa/reassoc-19.c -@@ -1,5 +1,5 @@ - /* { dg-do compile } */ --/* { dg-options "-Os -fdump-tree-optimized" } */ -+/* { dg-options "-Os -fivopts -fdump-tree-optimized" } */ - - /* Slightly changed testcase from PR middle-end/40815. */ - void bar(char*, char*, int); --- -2.7.4 - diff --git a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0004-LOCAL-For-dejagnu-static-testing-on-qemu-suppress-wa.patch b/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0004-LOCAL-For-dejagnu-static-testing-on-qemu-suppress-wa.patch deleted file mode 100644 index e16528b6..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0004-LOCAL-For-dejagnu-static-testing-on-qemu-suppress-wa.patch +++ /dev/null @@ -1,35 +0,0 @@ -From a4c99f7f7775f105eb6f1dfbdf304e6b7e498e2e Mon Sep 17 00:00:00 2001 -From: Mahesh Bodapati <mbodapat@xilinx.com> -Date: Wed, 11 Jan 2017 15:46:28 +0530 -Subject: [PATCH 04/54] [LOCAL]: For dejagnu static testing on qemu, suppress - warnings about multiple definitions from the test function and libc in line - with method used by powerpc. Dynamic linking and using a qemu binary which - understands sysroot resolves all test failures with builtins - -Signed-off-by: David Holsgrove <david.holsgrove@xilinx.com> ---- - gcc/testsuite/gcc.c-torture/execute/builtins/builtins.exp | 4 ---- - 1 file changed, 4 deletions(-) - -diff --git a/gcc/testsuite/gcc.c-torture/execute/builtins/builtins.exp b/gcc/testsuite/gcc.c-torture/execute/builtins/builtins.exp -index 1cb4f97..bdfa08a 100644 ---- a/gcc/testsuite/gcc.c-torture/execute/builtins/builtins.exp -+++ b/gcc/testsuite/gcc.c-torture/execute/builtins/builtins.exp -@@ -48,14 +48,10 @@ if { [istarget *-*-eabi*] - lappend additional_flags "-Wl,--allow-multiple-definition" - } - --<<<<<<< HEAD --======= - if [istarget "microblaze*-*-linux*"] { - lappend additional_flags "-Wl,-zmuldefs" -- lappend additional_flags "-fPIC" - } - -->>>>>>> 6ef6e5b... [LOCAL]: Testsuite - builtins tests require fpic - foreach src [lsort [find $srcdir/$subdir *.c]] { - if {![string match *-lib.c $src] && [runtest_file_p $runtests $src]} { - c-torture-execute [list $src \ --- -2.7.4 - diff --git a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0005-Patch-testsuite-Add-MicroBlaze-to-target-supports-fo.patch b/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0005-Patch-testsuite-Add-MicroBlaze-to-target-supports-fo.patch deleted file mode 100644 index 33688f14..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0005-Patch-testsuite-Add-MicroBlaze-to-target-supports-fo.patch +++ /dev/null @@ -1,35 +0,0 @@ -From 6b0de6811796b6834d426263eaa855b65c9b3389 Mon Sep 17 00:00:00 2001 -From: Mahesh Bodapati <mbodapat@xilinx.com> -Date: Wed, 11 Jan 2017 15:50:35 +0530 -Subject: [PATCH 05/54] [Patch, testsuite]: Add MicroBlaze to target-supports - for atomic buil. .tin tests - -MicroBlaze added to supported targets for atomic builtin tests. - -Changelog/testsuite - -2014-02-14 David Holsgrove <david.holsgrove@xilinx.com> - - * gcc/testsuite/lib/target-supports.exp: Add microblaze to - check_effective_target_sync_int_long. - -Signed-off-by: David Holsgrove <david.holsgrove@xilinx.com> ---- - gcc/testsuite/lib/target-supports.exp | 1 + - 1 file changed, 1 insertion(+) - -diff --git a/gcc/testsuite/lib/target-supports.exp b/gcc/testsuite/lib/target-supports.exp -index c591acd..94353cc 100644 ---- a/gcc/testsuite/lib/target-supports.exp -+++ b/gcc/testsuite/lib/target-supports.exp -@@ -7428,6 +7428,7 @@ proc check_effective_target_sync_int_long { } { - && [check_effective_target_arm_acq_rel]) - || [istarget bfin*-*linux*] - || [istarget hppa*-*linux*] -+ || [istarget microblaze*-*linux*] - || [istarget s390*-*-*] - || [istarget powerpc*-*-*] - || [istarget crisv32-*-*] || [istarget cris-*-*] --- -2.7.4 - diff --git a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0005-Testsuite-explicitly-add-fivopts-for-tests-that-depe.patch b/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0005-Testsuite-explicitly-add-fivopts-for-tests-that-depe.patch deleted file mode 100644 index b428d121..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0005-Testsuite-explicitly-add-fivopts-for-tests-that-depe.patch +++ /dev/null @@ -1,118 +0,0 @@ -From 7f0a129701ce9809d79ea4618f3293062bd24bbf Mon Sep 17 00:00:00 2001 -From: Mahesh Bodapati <mbodapat@xilinx.com> -Date: Sat, 26 Aug 2017 19:21:18 -0700 -Subject: [PATCH] Testsuite - explicitly add -fivopts for tests that depend on - it - -Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> -Signed-off-by: Mahesh Bodapati <mbodapat@xilinx.com> -Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com> -Upstream-Status: Pending ---- - gcc/testsuite/g++.dg/tree-ssa/ivopts-2.C | 2 +- - gcc/testsuite/g++.dg/tree-ssa/ivopts-3.C | 2 +- - gcc/testsuite/gcc.dg/tree-ssa/loop-2.c | 2 +- - gcc/testsuite/gcc.dg/tree-ssa/loop-4.c | 2 +- - gcc/testsuite/gcc.dg/tree-ssa/loop-5.c | 2 +- - gcc/testsuite/gcc.dg/tree-ssa/pr19210-1.c | 2 +- - gcc/testsuite/gcc.dg/tree-ssa/pr19590.c | 2 +- - gcc/testsuite/gcc.dg/tree-ssa/reassoc-19.c | 2 +- - 8 files changed, 8 insertions(+), 8 deletions(-) - -diff --git a/gcc/testsuite/g++.dg/tree-ssa/ivopts-2.C b/gcc/testsuite/g++.dg/tree-ssa/ivopts-2.C -index 438db88204..ede883eb28 100644 ---- a/gcc/testsuite/g++.dg/tree-ssa/ivopts-2.C -+++ b/gcc/testsuite/g++.dg/tree-ssa/ivopts-2.C -@@ -1,5 +1,5 @@ - /* { dg-do compile { target { i?86-*-* x86_64-*-* } } } */ --/* { dg-options "-O2 -fdump-tree-ivopts-details" } */ -+/* { dg-options "-O2 -fivopts -fdump-tree-ivopts-details" } */ - - void test (int *b, int *e, int stride) - { -diff --git a/gcc/testsuite/g++.dg/tree-ssa/ivopts-3.C b/gcc/testsuite/g++.dg/tree-ssa/ivopts-3.C -index eb72581390..02f3ea4a7d 100644 ---- a/gcc/testsuite/g++.dg/tree-ssa/ivopts-3.C -+++ b/gcc/testsuite/g++.dg/tree-ssa/ivopts-3.C -@@ -1,5 +1,5 @@ - // { dg-do compile } --// { dg-options "-O2 -fdump-tree-ivopts-details" } -+// { dg-options "-O2 -fivopts -fdump-tree-ivopts-details" } - - class MinimalVec3 - { -diff --git a/gcc/testsuite/gcc.dg/tree-ssa/loop-2.c b/gcc/testsuite/gcc.dg/tree-ssa/loop-2.c -index bda2516735..22c8a5dcff 100644 ---- a/gcc/testsuite/gcc.dg/tree-ssa/loop-2.c -+++ b/gcc/testsuite/gcc.dg/tree-ssa/loop-2.c -@@ -1,7 +1,7 @@ - /* A test for strength reduction and induction variable elimination. */ - - /* { dg-do compile } */ --/* { dg-options "-O1 -fdump-tree-optimized" } */ -+/* { dg-options "-O1 -fivopts -fdump-tree-optimized" } */ - /* { dg-require-effective-target size32plus } */ - - /* Size of this structure should be sufficiently weird so that no memory -diff --git a/gcc/testsuite/gcc.dg/tree-ssa/loop-4.c b/gcc/testsuite/gcc.dg/tree-ssa/loop-4.c -index f0770abdbb..65d74c8e62 100644 ---- a/gcc/testsuite/gcc.dg/tree-ssa/loop-4.c -+++ b/gcc/testsuite/gcc.dg/tree-ssa/loop-4.c -@@ -1,7 +1,7 @@ - /* A test for strength reduction and induction variable elimination. */ - - /* { dg-do compile } */ --/* { dg-options "-O1 -fdump-tree-optimized" } */ -+/* { dg-options "-O1 -fivopts -fdump-tree-optimized" } */ - /* { dg-require-effective-target size32plus } */ - - /* Size of this structure should be sufficiently weird so that no memory -diff --git a/gcc/testsuite/gcc.dg/tree-ssa/loop-5.c b/gcc/testsuite/gcc.dg/tree-ssa/loop-5.c -index 5f42857fe1..9bc86ee0d2 100644 ---- a/gcc/testsuite/gcc.dg/tree-ssa/loop-5.c -+++ b/gcc/testsuite/gcc.dg/tree-ssa/loop-5.c -@@ -1,7 +1,7 @@ - /* A test for induction variable merging. */ - - /* { dg-do compile } */ --/* { dg-options "-O1 -fdump-tree-optimized" } */ -+/* { dg-options "-O1 -fivopts -fdump-tree-optimized" } */ - - void foo(long); - -diff --git a/gcc/testsuite/gcc.dg/tree-ssa/pr19210-1.c b/gcc/testsuite/gcc.dg/tree-ssa/pr19210-1.c -index 3c8ee06016..db192a657f 100644 ---- a/gcc/testsuite/gcc.dg/tree-ssa/pr19210-1.c -+++ b/gcc/testsuite/gcc.dg/tree-ssa/pr19210-1.c -@@ -1,5 +1,5 @@ - /* { dg-do compile } */ --/* { dg-options "-O2 -Wunsafe-loop-optimizations" } */ -+/* { dg-options "-O2 -fivopts -Wunsafe-loop-optimizations" } */ - extern void g(void); - - void -diff --git a/gcc/testsuite/gcc.dg/tree-ssa/pr19590.c b/gcc/testsuite/gcc.dg/tree-ssa/pr19590.c -index 2c6cfc6f83..648e6e67e8 100644 ---- a/gcc/testsuite/gcc.dg/tree-ssa/pr19590.c -+++ b/gcc/testsuite/gcc.dg/tree-ssa/pr19590.c -@@ -1,5 +1,5 @@ - /* { dg-do compile } */ --/* { dg-options "-O2 -fdump-tree-ivopts" } */ -+/* { dg-options "-O2 -fivopts -fdump-tree-ivopts" } */ - - void vnum_test8(int *data) - { -diff --git a/gcc/testsuite/gcc.dg/tree-ssa/reassoc-19.c b/gcc/testsuite/gcc.dg/tree-ssa/reassoc-19.c -index e911bfcd52..5d3e7e0801 100644 ---- a/gcc/testsuite/gcc.dg/tree-ssa/reassoc-19.c -+++ b/gcc/testsuite/gcc.dg/tree-ssa/reassoc-19.c -@@ -1,5 +1,5 @@ - /* { dg-do compile } */ --/* { dg-options "-Os -fdump-tree-optimized" } */ -+/* { dg-options "-Os -fivopts -fdump-tree-optimized" } */ - - /* Slightly changed testcase from PR middle-end/40815. */ - void bar(char*, char*, int); --- -2.14.2 - diff --git a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0006-Patch-testsuite-Update-MicroBlaze-strings-test.patch b/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0006-Patch-testsuite-Update-MicroBlaze-strings-test.patch deleted file mode 100644 index 3e2368f2..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0006-Patch-testsuite-Update-MicroBlaze-strings-test.patch +++ /dev/null @@ -1,43 +0,0 @@ -From 0d2cca275f3e85ae42dac7888d862975d65ffb36 Mon Sep 17 00:00:00 2001 -From: Mahesh Bodapati <mbodapat@xilinx.com> -Date: Wed, 11 Jan 2017 16:20:01 +0530 -Subject: [PATCH 06/54] [Patch, testsuite]: Update MicroBlaze strings test for - new scan-assembly output resulting in use of $LC label - -ChangeLog/testsuite - -2014-02-14 David Holsgrove <david.holsgrove@xilinx.com> - - * gcc/testsuite/gcc.target/microblaze/others/strings1.c: Update - to include $LC label. - -Signed-off-by: David Holsgrove <david.holsgrove@xilinx.com> ---- - gcc/testsuite/gcc.target/microblaze/others/strings1.c | 6 ++++-- - 1 file changed, 4 insertions(+), 2 deletions(-) - -diff --git a/gcc/testsuite/gcc.target/microblaze/others/strings1.c b/gcc/testsuite/gcc.target/microblaze/others/strings1.c -index 7a63faf..0403b7b 100644 ---- a/gcc/testsuite/gcc.target/microblaze/others/strings1.c -+++ b/gcc/testsuite/gcc.target/microblaze/others/strings1.c -@@ -1,13 +1,15 @@ - /* { dg-options "-O3" } */ - -+/* { dg-final { scan-assembler "\.rodata*" } } */ -+/* { dg-final { scan-assembler "addik\tr(\[0-9]\|\[1-2]\[0-9]\|3\[0-1]),r(\[0-9]\|\[1-2]\[0-9]\|3\[0-1]),\\\$LC.*" } } */ -+/* { dg-final { scan-assembler "\lwi\tr(\[0-9]\|\[1-2]\[0-9]\|3\[0-1]),r(\[0-9]\|\[1-2]\[0-9]\|3\[0-1]),*" } } */ -+ - #include <string.h> - --/* { dg-final { scan-assembler "\.rodata*" } } */ - extern void somefunc (char *); - int testfunc () - { - char string2[80]; --/* { dg-final { scan-assembler "\lwi\tr(\[0-9]\|\[1-2]\[0-9]\|3\[0-1]),r0,.LC*" } } */ - strcpy (string2, "hello"); - somefunc (string2); - } --- -2.7.4 - diff --git a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0007-Patch-testsuite-Allow-MicroBlaze-.weakext-pattern-in.patch b/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0007-Patch-testsuite-Allow-MicroBlaze-.weakext-pattern-in.patch deleted file mode 100644 index bcd5dbad..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0007-Patch-testsuite-Allow-MicroBlaze-.weakext-pattern-in.patch +++ /dev/null @@ -1,67 +0,0 @@ -From b6f828da3caa827d8ccc08bbf260a2a01b2b2613 Mon Sep 17 00:00:00 2001 -From: Mahesh Bodapati <mbodapat@xilinx.com> -Date: Thu, 12 Jan 2017 16:14:15 +0530 -Subject: [PATCH 07/54] [Patch, testsuite]: Allow MicroBlaze .weakext pattern - in regex match Extend regex pattern to include optional ext at the end of - .weak to match the MicroBlaze weak label .weakext - -ChangeLog/testsuite - -2014-02-14 David Holsgrove <david.holsgrove@xilinx.com> - - * gcc/testsuite/g++.dg/abi/rtti3.C: Extend scan-assembler - pattern to take optional ext after .weak. - * gcc/testsuite/g++.dg/abi/thunk4.C: Likewise. - -Signed-off-by: David Holsgrove <david.holsgrove@xilinx.com> - -Conflicts: - - gcc/testsuite/g++.dg/abi/rtti3.C ---- - gcc/testsuite/g++.dg/abi/rtti3.C | 4 ++-- - gcc/testsuite/g++.dg/abi/thunk3.C | 2 +- - gcc/testsuite/g++.dg/abi/thunk4.C | 2 +- - 3 files changed, 4 insertions(+), 4 deletions(-) - -diff --git a/gcc/testsuite/g++.dg/abi/rtti3.C b/gcc/testsuite/g++.dg/abi/rtti3.C -index 0cc7d3e..f284cd9 100644 ---- a/gcc/testsuite/g++.dg/abi/rtti3.C -+++ b/gcc/testsuite/g++.dg/abi/rtti3.C -@@ -3,8 +3,8 @@ - - // { dg-require-weak "" } - // { dg-skip-if "Linkonce not weak" { *-*-mingw* *-*-cygwin } } --// { dg-final { scan-assembler ".weak\[ \t\]_?_ZTSPP1A" { target { ! { *-*-darwin* hppa*-*-hpux* } } } } } --// { dg-final { scan-assembler-not ".weak\[ \t\]_?_ZTIPP1A" { target { ! { *-*-darwin* } } } } } -+// { dg-final { scan-assembler ".weak(ext)?\[ \t\]_?_ZTSPP1A" { target { ! { *-*-darwin* } } } } } -+// { dg-final { scan-assembler-not ".weak(ext)?\[ \t\]_?_ZTIPP1A" { target { ! { *-*-darwin* } } } } } - // { dg-final { scan-assembler ".weak_definition\[ \t\]_?_ZTSPP1A" { target { *-*-darwin* } } } } - // { dg-final { scan-assembler-not ".weak_definition\[ \t\]_?_ZTIPP1A" { target { *-*-darwin* } } } } - -diff --git a/gcc/testsuite/g++.dg/abi/thunk3.C b/gcc/testsuite/g++.dg/abi/thunk3.C -index f2347f7..dcec8a7 100644 ---- a/gcc/testsuite/g++.dg/abi/thunk3.C -+++ b/gcc/testsuite/g++.dg/abi/thunk3.C -@@ -1,5 +1,5 @@ - // { dg-require-weak "" } --// { dg-final { scan-assembler-not ".weak\[\t \]_?_ZThn._N7Derived3FooEv" { target { ! { *-*-darwin* } } } } } -+// { dg-final { scan-assembler-not ".weak(ext)?\[\t \]_?_ZThn._N7Derived3FooEv" { target { ! { *-*-darwin* } } } } } - // { dg-final { scan-assembler-not ".weak_definition\[\t \]_?_ZThn._N7Derived3FooEv" { target { *-*-darwin* } } } } - - struct Base -diff --git a/gcc/testsuite/g++.dg/abi/thunk4.C b/gcc/testsuite/g++.dg/abi/thunk4.C -index 6e8f124..d1d34fe 100644 ---- a/gcc/testsuite/g++.dg/abi/thunk4.C -+++ b/gcc/testsuite/g++.dg/abi/thunk4.C -@@ -1,6 +1,6 @@ - // { dg-require-weak "" } - // { dg-skip-if "Linkonce not weak" { *-*-mingw* *-*-cygwin } } --// { dg-final { scan-assembler ".weak\[ \t\]_?_ZThn._N7Derived3FooEv" { target { ! { *-*-darwin* } } } } } -+// { dg-final { scan-assembler ".weak(ext)?\[ \t\]_?_ZThn._N7Derived3FooEv" { target { ! { *-*-darwin* } } } } } - // { dg-final { scan-assembler ".weak_definition\[ \t\]_?_ZThn._N7Derived3FooEv" { target { *-*-darwin* } } } } - - struct Base --- -2.7.4 - diff --git a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0008-Patch-testsuite-Add-MicroBlaze-to-check_profiling_av.patch b/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0008-Patch-testsuite-Add-MicroBlaze-to-check_profiling_av.patch deleted file mode 100644 index 6232535d..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0008-Patch-testsuite-Add-MicroBlaze-to-check_profiling_av.patch +++ /dev/null @@ -1,28 +0,0 @@ -From d27a2545486da9c6a4d3d5ca06b4affb83f8d0a1 Mon Sep 17 00:00:00 2001 -From: Mahesh Bodapati <mbodapat@xilinx.com> -Date: Thu, 12 Jan 2017 16:34:27 +0530 -Subject: [PATCH 08/54] [Patch, testsuite]: Add MicroBlaze to - check_profiling_available Testsuite, add microblaze*-*-* target in - check_profiling_available inline with other archs setting - profiling_available_saved to 0 - -Signed-off-by: David Holsgrove <david.holsgrove@xilinx.com> ---- - gcc/testsuite/lib/target-supports.exp | 1 + - 1 file changed, 1 insertion(+) - -diff --git a/gcc/testsuite/lib/target-supports.exp b/gcc/testsuite/lib/target-supports.exp -index 94353cc..ecfbe4d 100644 ---- a/gcc/testsuite/lib/target-supports.exp -+++ b/gcc/testsuite/lib/target-supports.exp -@@ -676,6 +676,7 @@ proc check_profiling_available { test_what } { - || [istarget m68k-*-elf] - || [istarget m68k-*-uclinux*] - || [istarget mips*-*-elf*] -+ || [istarget microblaze*-*-*] - || [istarget mmix-*-*] - || [istarget mn10300-*-elf*] - || [istarget moxie-*-elf*] --- -2.7.4 - diff --git a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0009-Patch-microblaze-Fix-atomic-side-effects.patch b/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0009-Patch-microblaze-Fix-atomic-side-effects.patch deleted file mode 100644 index db730f43..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0009-Patch-microblaze-Fix-atomic-side-effects.patch +++ /dev/null @@ -1,65 +0,0 @@ -From 8711bdfe27bce04d35ba93a1d18ccccd61371829 Mon Sep 17 00:00:00 2001 -From: Mahesh Bodapati <mbodapat@xilinx.com> -Date: Thu, 12 Jan 2017 16:41:43 +0530 -Subject: [PATCH 09/54] [Patch, microblaze]: Fix atomic side effects. In - atomic_compare_and_swapsi, add side effects to prevent incorrect assumptions - during optimization. Previously, the outputs were considered unused; this - generated assembly code with undefined side effects after invocation of the - atomic. - -Signed-off-by: Kirk Meyer <kirk.meyer@sencore.com> -Signed-off-by: David Holsgrove <david.holsgrove@xilinx.com> ---- - gcc/config/microblaze/microblaze.md | 3 +++ - gcc/config/microblaze/sync.md | 21 +++++++++++++-------- - 2 files changed, 16 insertions(+), 8 deletions(-) - -diff --git a/gcc/config/microblaze/microblaze.md b/gcc/config/microblaze/microblaze.md -index f698e54..93f5fa2 100644 ---- a/gcc/config/microblaze/microblaze.md -+++ b/gcc/config/microblaze/microblaze.md -@@ -41,6 +41,9 @@ - (UNSPEC_CMP 104) ;; signed compare - (UNSPEC_CMPU 105) ;; unsigned compare - (UNSPEC_TLS 106) ;; jump table -+ (UNSPECV_CAS_BOOL 201) ;; compare and swap (bool) -+ (UNSPECV_CAS_VAL 202) ;; compare and swap (val) -+ (UNSPECV_CAS_MEM 203) ;; compare and swap (mem) - ]) - - (define_c_enum "unspec" [ -diff --git a/gcc/config/microblaze/sync.md b/gcc/config/microblaze/sync.md -index b34bd54..8e694e9 100644 ---- a/gcc/config/microblaze/sync.md -+++ b/gcc/config/microblaze/sync.md -@@ -18,14 +18,19 @@ - ;; <http://www.gnu.org/licenses/>. - - (define_insn "atomic_compare_and_swapsi" -- [(match_operand:SI 0 "register_operand" "=&d") ;; bool output -- (match_operand:SI 1 "register_operand" "=&d") ;; val output -- (match_operand:SI 2 "nonimmediate_operand" "+Q") ;; memory -- (match_operand:SI 3 "register_operand" "d") ;; expected value -- (match_operand:SI 4 "register_operand" "d") ;; desired value -- (match_operand:SI 5 "const_int_operand" "") ;; is_weak -- (match_operand:SI 6 "const_int_operand" "") ;; mod_s -- (match_operand:SI 7 "const_int_operand" "") ;; mod_f -+ [(set (match_operand:SI 0 "register_operand" "=&d") ;; bool output -+ (unspec_volatile:SI -+ [(match_operand:SI 2 "nonimmediate_operand" "+Q") ;; memory -+ (match_operand:SI 3 "register_operand" "d") ;; expected value -+ (match_operand:SI 4 "register_operand" "d")] ;; desired value -+ UNSPECV_CAS_BOOL)) -+ (set (match_operand:SI 1 "register_operand" "=&d") ;; val output -+ (unspec_volatile:SI [(const_int 0)] UNSPECV_CAS_VAL)) -+ (set (match_dup 2) -+ (unspec_volatile:SI [(const_int 0)] UNSPECV_CAS_MEM)) -+ (match_operand:SI 5 "const_int_operand" "") ;; is_weak -+ (match_operand:SI 6 "const_int_operand" "") ;; mod_s -+ (match_operand:SI 7 "const_int_operand" "") ;; mod_f - (clobber (match_scratch:SI 8 "=&d"))] - "" - { --- -2.7.4 - diff --git a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0010-Patch-microblaze-Fix-atomic-boolean-return-value.patch b/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0010-Patch-microblaze-Fix-atomic-boolean-return-value.patch deleted file mode 100644 index 5058529a..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0010-Patch-microblaze-Fix-atomic-boolean-return-value.patch +++ /dev/null @@ -1,40 +0,0 @@ -From 92015c19e5d1baabd62067bf1cfc4522e85d1b25 Mon Sep 17 00:00:00 2001 -From: Mahesh Bodapati <mbodapat@xilinx.com> -Date: Thu, 12 Jan 2017 16:45:45 +0530 -Subject: [PATCH 10/54] [Patch, microblaze]: Fix atomic boolean return value. - In atomic_compare_and_swapsi, fix boolean return value. Previously, it - contained zero if successful and non-zero if unsuccessful. - -Signed-off-by: Kirk Meyer <kirk.meyer@sencore.com> -Signed-off-by: David Holsgrove <david.holsgrove@xilinx.com> ---- - gcc/config/microblaze/sync.md | 7 ++++--- - 1 file changed, 4 insertions(+), 3 deletions(-) - -diff --git a/gcc/config/microblaze/sync.md b/gcc/config/microblaze/sync.md -index 8e694e9..8ddb10d 100644 ---- a/gcc/config/microblaze/sync.md -+++ b/gcc/config/microblaze/sync.md -@@ -34,15 +34,16 @@ - (clobber (match_scratch:SI 8 "=&d"))] - "" - { -- output_asm_insn ("addc \tr0,r0,r0", operands); -+ output_asm_insn ("add \t%0,r0,r0", operands); - output_asm_insn ("lwx \t%1,%y2,r0", operands); - output_asm_insn ("addic\t%8,r0,0", operands); - output_asm_insn ("bnei \t%8,.-8", operands); -- output_asm_insn ("cmp \t%0,%1,%3", operands); -- output_asm_insn ("bnei \t%0,.+16", operands); -+ output_asm_insn ("cmp \t%8,%1,%3", operands); -+ output_asm_insn ("bnei \t%8,.+20", operands); - output_asm_insn ("swx \t%4,%y2,r0", operands); - output_asm_insn ("addic\t%8,r0,0", operands); - output_asm_insn ("bnei \t%8,.-28", operands); -+ output_asm_insn ("addi \t%0,r0,1", operands); - return ""; - } - ) --- -2.7.4 - diff --git a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0011-Patch-microblaze-Fix-the-Microblaze-crash-with-msmal.patch b/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0011-Patch-microblaze-Fix-the-Microblaze-crash-with-msmal.patch deleted file mode 100644 index 2451c938..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0011-Patch-microblaze-Fix-the-Microblaze-crash-with-msmal.patch +++ /dev/null @@ -1,33 +0,0 @@ -From 658476aef537c0c2d031eb1c7a001f00c1d9bf7b Mon Sep 17 00:00:00 2001 -From: Mahesh Bodapati <mbodapat@xilinx.com> -Date: Thu, 12 Jan 2017 16:50:17 +0530 -Subject: [PATCH 11/54] [Patch, microblaze]: Fix the Microblaze crash with - msmall-divides flag Compiler is crashing when we use msmall-divides and - mxl-barrel-shift flag. This is because when use above flags - microblaze_expand_divide function will be called for division operation. In - microblaze_expand_divide function we are using sub_reg but MicroBlaze doesn't - have subreg register due to this compiler was crashing. Changed the logic to - avoid sub_reg call - -Signed-off-by:Nagaraju Mekala <nmekala@xilix.com> ---- - gcc/config/microblaze/microblaze.c | 3 +-- - 1 file changed, 1 insertion(+), 2 deletions(-) - -diff --git a/gcc/config/microblaze/microblaze.c b/gcc/config/microblaze/microblaze.c -index 9a4a287..cbe8cb7 100644 ---- a/gcc/config/microblaze/microblaze.c -+++ b/gcc/config/microblaze/microblaze.c -@@ -3575,8 +3575,7 @@ microblaze_expand_divide (rtx operands[]) - mem_rtx = gen_rtx_MEM (QImode, - gen_rtx_PLUS (Pmode, regt1, div_table_rtx)); - -- insn = emit_insn (gen_movqi (regqi, mem_rtx)); -- insn = emit_insn (gen_movsi (operands[0], gen_rtx_SUBREG (SImode, regqi, 0))); -+ insn = emit_insn (gen_zero_extendqisi2(operands[0],mem_rtx)); - jump = emit_jump_insn_after (gen_jump (div_end_label), insn); - JUMP_LABEL (jump) = div_end_label; - LABEL_NUSES (div_end_label) = 1; --- -2.7.4 - diff --git a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0012-Patch-microblaze-Added-ashrsi3_with_size_opt.patch b/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0012-Patch-microblaze-Added-ashrsi3_with_size_opt.patch deleted file mode 100644 index b58df873..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0012-Patch-microblaze-Added-ashrsi3_with_size_opt.patch +++ /dev/null @@ -1,48 +0,0 @@ -From 64f1a238641616c9cca5823d7ca99e76a7c2a490 Mon Sep 17 00:00:00 2001 -From: Mahesh Bodapati <mbodapat@xilinx.com> -Date: Thu, 12 Jan 2017 16:52:56 +0530 -Subject: [PATCH 12/54] [Patch, microblaze]: Added ashrsi3_with_size_opt Added - ashrsi3_with_size_opt pattern to optimize the sra instructions when the -Os - optimization is used. lshrsi3_with_size_opt is being removed as it has - conflicts with unsigned int variables - -Signed-off-by:Nagaraju Mekala <nmekala@xilix.com> ---- - gcc/config/microblaze/microblaze.md | 21 +++++++++++++++++++++ - 1 file changed, 21 insertions(+) - -diff --git a/gcc/config/microblaze/microblaze.md b/gcc/config/microblaze/microblaze.md -index 93f5fa2..fe90a14 100644 ---- a/gcc/config/microblaze/microblaze.md -+++ b/gcc/config/microblaze/microblaze.md -@@ -1506,6 +1506,27 @@ - (set_attr "length" "4,4")] - ) - -+(define_insn "*ashrsi3_with_size_opt" -+ [(set (match_operand:SI 0 "register_operand" "=&d") -+ (ashiftrt:SI (match_operand:SI 1 "register_operand" "d") -+ (match_operand:SI 2 "immediate_operand" "I")))] -+ "(INTVAL (operands[2]) > 5 && optimize_size)" -+ { -+ operands[3] = gen_rtx_REG (SImode, MB_ABI_ASM_TEMP_REGNUM); -+ -+ output_asm_insn ("ori\t%3,r0,%2", operands); -+ if (REGNO (operands[0]) != REGNO (operands[1])) -+ output_asm_insn ("addk\t%0,%1,r0", operands); -+ -+ output_asm_insn ("addik\t%3,%3,-1", operands); -+ output_asm_insn ("bneid\t%3,.-4", operands); -+ return "sra\t%0,%0"; -+ } -+ [(set_attr "type" "arith") -+ (set_attr "mode" "SI") -+ (set_attr "length" "20")] -+) -+ - (define_insn "*ashrsi_inline" - [(set (match_operand:SI 0 "register_operand" "=&d") - (ashiftrt:SI (match_operand:SI 1 "register_operand" "d") --- -2.7.4 - diff --git a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0013-Patch-microblaze-Fixed-missing-save-of-r18-in-fast_i.patch b/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0013-Patch-microblaze-Fixed-missing-save-of-r18-in-fast_i.patch deleted file mode 100644 index 6af0f10e..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0013-Patch-microblaze-Fixed-missing-save-of-r18-in-fast_i.patch +++ /dev/null @@ -1,41 +0,0 @@ -From ed23e22fb25a2d3dc357c0743f51b2735fc46a6a Mon Sep 17 00:00:00 2001 -From: Mahesh Bodapati <mbodapat@xilinx.com> -Date: Thu, 12 Jan 2017 17:50:03 +0530 -Subject: [PATCH 13/54] [Patch, microblaze]: Fixed missing save of r18 in - fast_interrupt. Register 18 is used as a clobber register, and must be stored - when entering a fast_interrupt. Before this fix, register 18 was only saved - if it was used directly in the interrupt function. - -However, if the fast_interrupt function called a function that used -r18, the register would not be saved, and thus be mangled -upon returning from the interrupt. - -Changelog - -2014-02-27 Klaus Petersen <klauspetersen@gmail.com> - - * gcc/config/microblaze/microblaze.c: Check for fast_interrupt in - microblaze_must_save_register. - -Signed-off-by: Klaus Petersen <klauspetersen@gmail.com> -Signed-off-by: David Holsgrove <david.holsgrove@xilinx.com> ---- - gcc/config/microblaze/microblaze.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/gcc/config/microblaze/microblaze.c b/gcc/config/microblaze/microblaze.c -index cbe8cb7..6f0b4f4 100644 ---- a/gcc/config/microblaze/microblaze.c -+++ b/gcc/config/microblaze/microblaze.c -@@ -1967,7 +1967,7 @@ microblaze_must_save_register (int regno) - { - if (df_regs_ever_live_p (regno) - || regno == MB_ABI_MSR_SAVE_REG -- || (interrupt_handler -+ || ((interrupt_handler || fast_interrupt) - && (regno == MB_ABI_ASM_TEMP_REGNUM - || regno == MB_ABI_EXCEPTION_RETURN_ADDR_REGNUM))) - return 1; --- -2.7.4 - diff --git a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0014-Patch-microblaze-Use-bralid-for-profiler-calls.patch b/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0014-Patch-microblaze-Use-bralid-for-profiler-calls.patch deleted file mode 100644 index f47265b0..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0014-Patch-microblaze-Use-bralid-for-profiler-calls.patch +++ /dev/null @@ -1,26 +0,0 @@ -From 582558f3c18d096885ab24e645899f310b148b5c Mon Sep 17 00:00:00 2001 -From: Mahesh Bodapati <mbodapat@xilinx.com> -Date: Tue, 17 Jan 2017 10:57:19 +0530 -Subject: [PATCH 14/54] [Patch, microblaze]: Use bralid for profiler calls - Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> - ---- - gcc/config/microblaze/microblaze.h | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/gcc/config/microblaze/microblaze.h b/gcc/config/microblaze/microblaze.h -index 0d3718f..88e0351 100644 ---- a/gcc/config/microblaze/microblaze.h -+++ b/gcc/config/microblaze/microblaze.h -@@ -486,7 +486,7 @@ typedef struct microblaze_args - - #define FUNCTION_PROFILER(FILE, LABELNO) { \ - { \ -- fprintf (FILE, "\tbrki\tr16,_mcount\n"); \ -+ fprintf (FILE, "\tbralid\tr15,_mcount\nnop\n"); \ - } \ - } - --- -2.7.4 - diff --git a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0015-Patch-microblaze-Disable-fivopts-by-default.patch b/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0015-Patch-microblaze-Disable-fivopts-by-default.patch deleted file mode 100644 index acfa083f..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0015-Patch-microblaze-Disable-fivopts-by-default.patch +++ /dev/null @@ -1,42 +0,0 @@ -From b60068cbdd3c830e541fbd35f2ed119245911461 Mon Sep 17 00:00:00 2001 -From: Mahesh Bodapati <mbodapat@xilinx.com> -Date: Tue, 17 Jan 2017 11:10:21 +0530 -Subject: [PATCH 15/54] [Patch, microblaze]: Disable fivopts by default Turn - off ivopts by default. Interferes with cse. - -Changelog - -2013-03-18 Edgar E. Iglesias <edgar.iglesias@xilinx.com> - - * gcc/common/config/microblaze/microblaze-common.c - (microblaze_option_optimization_table): Disable fivopts by default. - -Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> -Signed-off-by: David Holsgrove <david.holsgrove@xilinx.com> ---- - gcc/common/config/microblaze/microblaze-common.c | 9 +++++++++ - 1 file changed, 9 insertions(+) - -diff --git a/gcc/common/config/microblaze/microblaze-common.c b/gcc/common/config/microblaze/microblaze-common.c -index 3e75675..fe45f2e 100644 ---- a/gcc/common/config/microblaze/microblaze-common.c -+++ b/gcc/common/config/microblaze/microblaze-common.c -@@ -24,6 +24,15 @@ - #include "common/common-target.h" - #include "common/common-target-def.h" - -+/* Implement TARGET_OPTION_OPTIMIZATION_TABLE. */ -+static const struct default_options microblaze_option_optimization_table[] = -+ { -+ /* Turn off ivopts by default. It messes up cse. */ -+ { OPT_LEVELS_ALL, OPT_fivopts, NULL, 0 }, -+ { OPT_LEVELS_1_PLUS, OPT_fomit_frame_pointer, NULL, 1 }, -+ { OPT_LEVELS_NONE, 0, NULL, 0 } -+ }; -+ - #undef TARGET_DEFAULT_TARGET_FLAGS - #define TARGET_DEFAULT_TARGET_FLAGS TARGET_DEFAULT - --- -2.7.4 - diff --git a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0016-Patch-microblaze-Removed-moddi3-routinue.patch b/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0016-Patch-microblaze-Removed-moddi3-routinue.patch deleted file mode 100644 index dbd7b2e2..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0016-Patch-microblaze-Removed-moddi3-routinue.patch +++ /dev/null @@ -1,157 +0,0 @@ -From 640628680ff6f028ad6d5fef2e41da29664f036f Mon Sep 17 00:00:00 2001 -From: Mahesh Bodapati <mbodapat@xilinx.com> -Date: Thu, 12 Jan 2017 17:36:16 +0530 -Subject: [PATCH 16/54] [Patch, microblaze]: Removed moddi3 routinue Using the - default moddi3 function as the existing implementation has many bugs - -Signed-off-by:Nagaraju <nmekala@xilix.com> ---- - libgcc/config/microblaze/moddi3.S | 121 ---------------------------------- - libgcc/config/microblaze/t-microblaze | 3 +- - 2 files changed, 1 insertion(+), 123 deletions(-) - delete mode 100644 libgcc/config/microblaze/moddi3.S - -diff --git a/libgcc/config/microblaze/moddi3.S b/libgcc/config/microblaze/moddi3.S -deleted file mode 100644 -index a8f17d7..0000000 ---- a/libgcc/config/microblaze/moddi3.S -+++ /dev/null -@@ -1,121 +0,0 @@ --################################### --# --# Copyright (C) 2009-2018 Free Software Foundation, Inc. --# --# Contributed by Michael Eager <eager@eagercon.com>. --# --# This file is free software; you can redistribute it and/or modify it --# under the terms of the GNU General Public License as published by the --# Free Software Foundation; either version 3, or (at your option) any --# later version. --# --# GCC is distributed in the hope that it will be useful, but WITHOUT --# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY --# or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public --# License for more details. --# --# Under Section 7 of GPL version 3, you are granted additional --# permissions described in the GCC Runtime Library Exception, version --# 3.1, as published by the Free Software Foundation. --# --# You should have received a copy of the GNU General Public License and --# a copy of the GCC Runtime Library Exception along with this program; --# see the files COPYING3 and COPYING.RUNTIME respectively. If not, see --# <http://www.gnu.org/licenses/>. --# --# modsi3.S --# --# modulo operation for 64 bit integers. --# --####################################### -- -- --/* An executable stack is *not* required for these functions. */ --#ifdef __linux__ --.section .note.GNU-stack,"",%progbits --.previous --#endif -- -- .globl __moddi3 -- .ent __moddi3 --__moddi3: -- .frame r1,0,r15 -- --#Change the stack pointer value and Save callee saved regs -- addik r1,r1,-24 -- swi r25,r1,0 -- swi r26,r1,4 -- swi r27,r1,8 # used for sign -- swi r28,r1,12 # used for loop count -- swi r29,r1,16 # Used for div value High -- swi r30,r1,20 # Used for div value Low -- --#Check for Zero Value in the divisor/dividend -- OR r9,r5,r6 # Check for the op1 being zero -- BEQID r9,$LaResult_Is_Zero # Result is zero -- OR r9,r7,r8 # Check for the dividend being zero -- BEQI r9,$LaDiv_By_Zero # Div_by_Zero # Division Error -- BGEId r5,$La1_Pos -- XOR r27,r5,r7 # Get the sign of the result -- RSUBI r6,r6,0 # Make dividend positive -- RSUBIC r5,r5,0 # Make dividend positive --$La1_Pos: -- BGEI r7,$La2_Pos -- RSUBI r8,r8,0 # Make Divisor Positive -- RSUBIC r9,r9,0 # Make Divisor Positive --$La2_Pos: -- ADDIK r4,r0,0 # Clear mod low -- ADDIK r3,r0,0 # Clear mod high -- ADDIK r29,r0,0 # clear div high -- ADDIK r30,r0,0 # clear div low -- ADDIK r28,r0,64 # Initialize the loop count -- # First part try to find the first '1' in the r5/r6 --$LaDIV1: -- ADD r6,r6,r6 -- ADDC r5,r5,r5 # left shift logical r5 -- BGEID r5,$LaDIV1 -- ADDIK r28,r28,-1 --$LaDIV2: -- ADD r6,r6,r6 -- ADDC r5,r5,r5 # left shift logical r5/r6 get the '1' into the Carry -- ADDC r4,r4,r4 # Move that bit into the Mod register -- ADDC r3,r3,r3 # Move carry into high mod register -- rsub r18,r7,r3 # Compare the High Parts of Mod and Divisor -- bnei r18,$L_High_EQ -- rsub r18,r6,r4 # Compare Low Parts only if Mod[h] == Divisor[h] --$L_High_EQ: -- rSUB r26,r8,r4 # Subtract divisor[L] from Mod[L] -- rsubc r25,r7,r3 # Subtract divisor[H] from Mod[H] -- BLTi r25,$LaMOD_TOO_SMALL -- OR r3,r0,r25 # move r25 to mod [h] -- OR r4,r0,r26 # move r26 to mod [l] -- ADDI r30,r30,1 -- ADDC r29,r29,r0 --$LaMOD_TOO_SMALL: -- ADDIK r28,r28,-1 -- BEQi r28,$LaLOOP_END -- ADD r30,r30,r30 # Shift in the '1' into div [low] -- ADDC r29,r29,r29 # Move the carry generated into high -- BRI $LaDIV2 # Div2 --$LaLOOP_END: -- BGEI r27,$LaRETURN_HERE -- rsubi r30,r30,0 -- rsubc r29,r29,r0 -- BRI $LaRETURN_HERE --$LaDiv_By_Zero: --$LaResult_Is_Zero: -- or r29,r0,r0 # set result to 0 [High] -- or r30,r0,r0 # set result to 0 [Low] --$LaRETURN_HERE: --# Restore values of CSRs and that of r29 and the divisor and the dividend -- -- lwi r25,r1,0 -- lwi r26,r1,4 -- lwi r27,r1,8 -- lwi r28,r1,12 -- lwi r29,r1,16 -- lwi r30,r1,20 -- rtsd r15,8 -- addik r1,r1,24 -- .end __moddi3 -- -diff --git a/libgcc/config/microblaze/t-microblaze b/libgcc/config/microblaze/t-microblaze -index 96959f0..8d954a4 100644 ---- a/libgcc/config/microblaze/t-microblaze -+++ b/libgcc/config/microblaze/t-microblaze -@@ -1,8 +1,7 @@ --LIB2FUNCS_EXCLUDE += _divsi3 _modsi3 _moddi3 _mulsi3 _udivsi3 _umodsi3 -+LIB2FUNCS_EXCLUDE += _divsi3 _modsi3 _mulsi3 _udivsi3 _umodsi3 - - LIB2ADD += \ - $(srcdir)/config/microblaze/divsi3.S \ -- $(srcdir)/config/microblaze/moddi3.S \ - $(srcdir)/config/microblaze/modsi3.S \ - $(srcdir)/config/microblaze/muldi3_hard.S \ - $(srcdir)/config/microblaze/mulsi3.S \ --- -2.7.4 - diff --git a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0017-Patch-microblaze-Add-INIT_PRIORITY-support.patch b/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0017-Patch-microblaze-Add-INIT_PRIORITY-support.patch deleted file mode 100644 index 6fb1b32f..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0017-Patch-microblaze-Add-INIT_PRIORITY-support.patch +++ /dev/null @@ -1,101 +0,0 @@ -From c0e74b79cc1db2f68dd560154225da1e5ddfd920 Mon Sep 17 00:00:00 2001 -From: Mahesh Bodapati <mbodapat@xilinx.com> -Date: Tue, 17 Jan 2017 14:41:58 +0530 -Subject: [PATCH 17/54] [Patch, microblaze]: Add INIT_PRIORITY support Added - TARGET_ASM_CONSTRUCTOR and TARGET_ASM_DESTRUCTOR macros. - -These macros allows users to control the order of initialization -of objects defined at namespace scope with the init_priority -attribute by specifying a relative priority, a constant integral -expression currently bounded between 101 and 65535 inclusive. - -Lower numbers indicate a higher priority. - -Changelog - -2013-11-26 Nagaraju Mekala <nagaraju.mekala@xilinx.com> - - * gcc/config/microblaze/microblaze.c: Add microblaze_asm_constructor, - microblaze_asm_destructor. Define TARGET_ASM_CONSTRUCTOR and - TARGET_ASM_DESTRUCTOR. - -Signed-off-by:nagaraju <nmekala@xilix.com> -Signed-off-by: David Holsgrove <david.holsgrove@xilinx.com> ---- - gcc/config/microblaze/microblaze.c | 53 ++++++++++++++++++++++++++++++++++++++ - 1 file changed, 53 insertions(+) - -diff --git a/gcc/config/microblaze/microblaze.c b/gcc/config/microblaze/microblaze.c -index 6f0b4f4..53b44df 100644 ---- a/gcc/config/microblaze/microblaze.c -+++ b/gcc/config/microblaze/microblaze.c -@@ -2554,6 +2554,53 @@ print_operand_address (FILE * file, rtx addr) - } - } - -+/* Output an element in the table of global constructors. */ -+void -+microblaze_asm_constructor (rtx symbol ATTRIBUTE_UNUSED, int priority) -+{ -+ const char *section = ".ctors"; -+ char buf[16]; -+ -+ if (priority != DEFAULT_INIT_PRIORITY) -+ { -+ sprintf (buf, ".ctors.%.5u", -+ /* Invert the numbering so the linker puts us in the proper -+ order; constructors are run from right to left, and the -+ linker sorts in increasing order. */ -+ MAX_INIT_PRIORITY - priority); -+ section = buf; -+ } -+ -+ switch_to_section (get_section (section, 0, NULL)); -+ assemble_align (POINTER_SIZE); -+ fputs ("\t.word\t", asm_out_file); -+ output_addr_const (asm_out_file, symbol); -+ fputs ("\n", asm_out_file); -+} -+ -+/* Output an element in the table of global destructors. */ -+void -+microblaze_asm_destructor (rtx symbol, int priority) -+{ -+ const char *section = ".dtors"; -+ char buf[16]; -+ if (priority != DEFAULT_INIT_PRIORITY) -+ { -+ sprintf (buf, ".dtors.%.5u", -+ /* Invert the numbering so the linker puts us in the proper -+ order; constructors are run from right to left, and the -+ linker sorts in increasing order. */ -+ MAX_INIT_PRIORITY - priority); -+ section = buf; -+ } -+ -+ switch_to_section (get_section (section, 0, NULL)); -+ assemble_align (POINTER_SIZE); -+ fputs ("\t.word\t", asm_out_file); -+ output_addr_const (asm_out_file, symbol); -+ fputs ("\n", asm_out_file); -+} -+ - /* Emit either a label, .comm, or .lcomm directive, and mark that the symbol - is used, so that we don't emit an .extern for it in - microblaze_asm_file_end. */ -@@ -3841,6 +3888,12 @@ microblaze_starting_frame_offset (void) - #undef TARGET_ATTRIBUTE_TABLE - #define TARGET_ATTRIBUTE_TABLE microblaze_attribute_table - -+#undef TARGET_ASM_CONSTRUCTOR -+#define TARGET_ASM_CONSTRUCTOR microblaze_asm_constructor -+ -+#undef TARGET_ASM_DESTRUCTOR -+#define TARGET_ASM_DESTRUCTOR microblaze_asm_destructor -+ - #undef TARGET_IN_SMALL_DATA_P - #define TARGET_IN_SMALL_DATA_P microblaze_elf_in_small_data_p - --- -2.7.4 - diff --git a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0018-Patch-microblaze-Add-optimized-lshrsi3.patch b/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0018-Patch-microblaze-Add-optimized-lshrsi3.patch deleted file mode 100644 index ab2473a3..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0018-Patch-microblaze-Add-optimized-lshrsi3.patch +++ /dev/null @@ -1,81 +0,0 @@ -From 2cba68c3e27ffaea77cc5469233cf4dcb9383142 Mon Sep 17 00:00:00 2001 -From: Mahesh Bodapati <mbodapat@xilinx.com> -Date: Tue, 17 Jan 2017 15:23:57 +0530 -Subject: [PATCH 18/54] [Patch, microblaze]: Add optimized lshrsi3 When barrel - shifter is not present, the immediate value is greater than #5 and - optimization is -OS, the compiler will generate shift operation using loop. - -Changelog - -2013-11-26 David Holsgrove <david.holsgrove@xilinx.com> - - * gcc/config/microblaze/microblaze.md: Add size optimized lshrsi3 insn - -ChangeLog/testsuite - -2014-02-12 David Holsgrove <david.holsgrove@xilinx.com> - - * gcc/testsuite/gcc.target/microblaze/others/lshrsi_Os_1.c: New test. - -Signed-off-by:Nagaraju <nmekala@xilix.com> -Signed-off-by: David Holsgrove <david.holsgrove@xilinx.com> ---- - gcc/config/microblaze/microblaze.md | 21 +++++++++++++++++++++ - .../gcc.target/microblaze/others/lshrsi_Os_1.c | 13 +++++++++++++ - 2 files changed, 34 insertions(+) - create mode 100644 gcc/testsuite/gcc.target/microblaze/others/lshrsi_Os_1.c - -diff --git a/gcc/config/microblaze/microblaze.md b/gcc/config/microblaze/microblaze.md -index fe90a14..c063ffc 100644 ---- a/gcc/config/microblaze/microblaze.md -+++ b/gcc/config/microblaze/microblaze.md -@@ -1616,6 +1616,27 @@ - (set_attr "length" "4,4")] - ) - -+(define_insn "*lshrsi3_with_size_opt" -+ [(set (match_operand:SI 0 "register_operand" "=&d") -+ (lshiftrt:SI (match_operand:SI 1 "register_operand" "d") -+ (match_operand:SI 2 "immediate_operand" "I")))] -+ "(INTVAL (operands[2]) > 5 && optimize_size)" -+ { -+ operands[3] = gen_rtx_REG (SImode, MB_ABI_ASM_TEMP_REGNUM); -+ -+ output_asm_insn ("ori\t%3,r0,%2", operands); -+ if (REGNO (operands[0]) != REGNO (operands[1])) -+ output_asm_insn ("addk\t%0,%1,r0", operands); -+ -+ output_asm_insn ("addik\t%3,%3,-1", operands); -+ output_asm_insn ("bneid\t%3,.-4", operands); -+ return "srl\t%0,%0"; -+ } -+ [(set_attr "type" "multi") -+ (set_attr "mode" "SI") -+ (set_attr "length" "20")] -+) -+ - (define_insn "*lshrsi_inline" - [(set (match_operand:SI 0 "register_operand" "=&d") - (lshiftrt:SI (match_operand:SI 1 "register_operand" "d") -diff --git a/gcc/testsuite/gcc.target/microblaze/others/lshrsi_Os_1.c b/gcc/testsuite/gcc.target/microblaze/others/lshrsi_Os_1.c -new file mode 100644 -index 0000000..32a3be7 ---- /dev/null -+++ b/gcc/testsuite/gcc.target/microblaze/others/lshrsi_Os_1.c -@@ -0,0 +1,13 @@ -+/* { dg-options "-Os -mno-xl-barrel-shift" } */ -+ -+void testfunc(void) -+{ -+ unsigned volatile int z = 8192; -+ z >>= 8; -+} -+/* { dg-final { scan-assembler-not "\bsrli" } } */ -+/* { dg-final { scan-assembler "\ori\tr18,r0" } } */ -+/* { dg-final { scan-assembler "addk\tr(\[0-9]\|\[1-2]\[0-9]\|3\[0-1]),r(\[0-9]\|\[1-2]\[0-9]\|3\[0-1]),r0" } } */ -+/* { dg-final { scan-assembler "addik\tr18,r18,-1" } } */ -+/* { dg-final { scan-assembler "bneid\tr18,.-4" } } */ -+/* { dg-final { scan-assembler "\srl\tr(\[0-9]\|\[1-2]\[0-9]\|3\[0-1]),r(\[0-9]\|\[1-2]\[0-9]\|3\[0-1])" } } */ --- -2.7.4 - diff --git a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0019-Patch-microblaze-Modified-trap-instruction.patch b/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0019-Patch-microblaze-Modified-trap-instruction.patch deleted file mode 100644 index 5afcff43..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0019-Patch-microblaze-Modified-trap-instruction.patch +++ /dev/null @@ -1,29 +0,0 @@ -From e8b05b5105655d276c93864ab90e15bfbe46cf74 Mon Sep 17 00:00:00 2001 -From: Mahesh Bodapati <mbodapat@xilinx.com> -Date: Tue, 17 Jan 2017 15:42:15 +0530 -Subject: [PATCH 19/54] [Patch, microblaze]: Modified trap instruction The - instruction was wrongly written to brki r0,-1 it should be bri r0. Modified - with the correct instruction - -Signed-off-by :Nagaraju Mekala <nmekala@xilix.com> - :Ajit Agarwal <ajitkum@xilinx.com> ---- - gcc/config/microblaze/microblaze.md | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/gcc/config/microblaze/microblaze.md b/gcc/config/microblaze/microblaze.md -index c063ffc..7bbdbe1 100644 ---- a/gcc/config/microblaze/microblaze.md -+++ b/gcc/config/microblaze/microblaze.md -@@ -2344,7 +2344,7 @@ - (define_insn "trap" - [(trap_if (const_int 1) (const_int 0))] - "" -- "brki\tr0,-1" -+ "bri\t0" - [(set_attr "type" "trap")] - ) - --- -2.7.4 - diff --git a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0020-Patch-microblaze-Reducing-Stack-space-for-arguments.patch b/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0020-Patch-microblaze-Reducing-Stack-space-for-arguments.patch deleted file mode 100644 index 6e07ac4f..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0020-Patch-microblaze-Reducing-Stack-space-for-arguments.patch +++ /dev/null @@ -1,206 +0,0 @@ -From 0cc6aabbd3f7b331c3995f11efec545499297358 Mon Sep 17 00:00:00 2001 -From: Mahesh Bodapati <mbodapat@xilinx.com> -Date: Tue, 17 Jan 2017 16:42:44 +0530 -Subject: [PATCH 20/54] [Patch, microblaze]: Reducing Stack space for arguments - Currently in Microblaze target stack space for arguments in register is being - allocated even if there are no arguments in the function. This patch will - optimize the extra 24 bytes that are being allocated. - -Signed-off-by :Nagaraju Mekala <nmekala@xilix.com> - :Ajit Agarwal <ajitkum@xilinx.com> - -ChangeLog: -2015-04-17 Nagaraju Mekala <nmekala@xilix.com> - Ajit Agarwal <ajitkum@xilinx.com> - - *microblaze.c (microblaze_parm_needs_stack, microblaze_function_parms_need_stack): New - *microblaze.c (REG_PARM_STACK_SPACE): Modify ---- - gcc/config/microblaze/microblaze-protos.h | 1 + - gcc/config/microblaze/microblaze.c | 134 +++++++++++++++++++++++++++++- - gcc/config/microblaze/microblaze.h | 4 +- - 3 files changed, 136 insertions(+), 3 deletions(-) - -diff --git a/gcc/config/microblaze/microblaze-protos.h b/gcc/config/microblaze/microblaze-protos.h -index 4cbba0c..f8a56f7 100644 ---- a/gcc/config/microblaze/microblaze-protos.h -+++ b/gcc/config/microblaze/microblaze-protos.h -@@ -58,6 +58,7 @@ extern int symbol_mentioned_p (rtx); - extern int label_mentioned_p (rtx); - extern bool microblaze_cannot_force_const_mem (machine_mode, rtx); - extern void microblaze_eh_return (rtx op0); -+int microblaze_reg_parm_stack_space(tree fun); - #endif /* RTX_CODE */ - - /* Declare functions in microblaze-c.c. */ -diff --git a/gcc/config/microblaze/microblaze.c b/gcc/config/microblaze/microblaze.c -index 53b44df..0dec362 100644 ---- a/gcc/config/microblaze/microblaze.c -+++ b/gcc/config/microblaze/microblaze.c -@@ -1989,6 +1989,138 @@ microblaze_must_save_register (int regno) - return 0; - } - -+static bool -+microblaze_parm_needs_stack (cumulative_args_t args_so_far, tree type) -+{ -+ enum machine_mode mode; -+ int unsignedp; -+ rtx entry_parm; -+ -+ /* Catch errors. */ -+ if (type == NULL || type == error_mark_node) -+ return true; -+ -+ if (TREE_CODE (type) == POINTER_TYPE) -+ return true; -+ -+ /* Handle types with no storage requirement. */ -+ if (TYPE_MODE (type) == VOIDmode) -+ return false; -+ -+ /* Handle complex types. */ -+ if (TREE_CODE (type) == COMPLEX_TYPE) -+ return (microblaze_parm_needs_stack (args_so_far, TREE_TYPE (type)) -+ || microblaze_parm_needs_stack (args_so_far, TREE_TYPE (type))); -+ -+ /* Handle transparent aggregates. */ -+ if ((TREE_CODE (type) == UNION_TYPE || TREE_CODE (type) == RECORD_TYPE) -+ && TYPE_TRANSPARENT_AGGR (type)) -+ type = TREE_TYPE (first_field (type)); -+ -+ /* See if this arg was passed by invisible reference. */ -+ if (pass_by_reference (get_cumulative_args (args_so_far), -+ TYPE_MODE (type), type, true)) -+ type = build_pointer_type (type); -+ -+ /* Find mode as it is passed by the ABI. */ -+ unsignedp = TYPE_UNSIGNED (type); -+ mode = promote_mode (type, TYPE_MODE (type), &unsignedp); -+ -+/* If there is no incoming register, we need a stack. */ -+ entry_parm = microblaze_function_arg (args_so_far, mode, type, true); -+ if (entry_parm == NULL) -+ return true; -+ -+ /* Likewise if we need to pass both in registers and on the stack. */ -+ if (GET_CODE (entry_parm) == PARALLEL -+ && XEXP (XVECEXP (entry_parm, 0, 0), 0) == NULL_RTX) -+ return true; -+ -+ /* Also true if we're partially in registers and partially not. */ -+ if (function_arg_partial_bytes (args_so_far, mode, type, true) != 0) -+ return true; -+ -+ /* Update info on where next arg arrives in registers. */ -+ microblaze_function_arg_advance (args_so_far, mode, type, true); -+ return false; -+ } -+ -+static bool -+microblaze_function_parms_need_stack (tree fun, bool incoming) -+{ -+ tree fntype, result; -+ CUMULATIVE_ARGS args_so_far_v; -+ cumulative_args_t args_so_far; -+ int num_of_args = 0; -+ -+ /* Must be a libcall, all of which only use reg parms. */ -+ if (!fun) -+ return true; -+ -+ fntype = fun; -+ if (!TYPE_P (fun)) -+ fntype = TREE_TYPE (fun); -+ -+ /* Varargs functions need the parameter save area. */ -+ if ((!incoming && !prototype_p (fntype)) || stdarg_p (fntype)) -+ return true; -+ -+ INIT_CUMULATIVE_ARGS(args_so_far_v, fntype, NULL_RTX,0,0); -+ args_so_far = pack_cumulative_args (&args_so_far_v); -+ -+ /* When incoming, we will have been passed the function decl. -+ * It is necessary to use the decl to handle K&R style functions, -+ * where TYPE_ARG_TYPES may not be available. */ -+ if (incoming) -+ { -+ gcc_assert (DECL_P (fun)); -+ result = DECL_RESULT (fun); -+ } -+ else -+ result = TREE_TYPE (fntype); -+ -+ if (result && aggregate_value_p (result, fntype)) -+ { -+ if (!TYPE_P (result)) -+ result = build_pointer_type (result); -+ microblaze_parm_needs_stack (args_so_far, result); -+ } -+ -+ if (incoming) -+ { -+ tree parm; -+ for (parm = DECL_ARGUMENTS (fun); -+ parm && parm != void_list_node; -+ parm = TREE_CHAIN (parm)) -+ if (microblaze_parm_needs_stack (args_so_far, TREE_TYPE (parm))) -+ return true; -+ } -+ else -+ { -+ function_args_iterator args_iter; -+ tree arg_type; -+ -+ FOREACH_FUNCTION_ARGS (fntype, arg_type, args_iter) -+ { -+ num_of_args++; -+ if (microblaze_parm_needs_stack (args_so_far, arg_type)) -+ return true; -+ } -+ } -+ -+ if (num_of_args > 3) return true; -+ -+ return false; -+} -+ -+int microblaze_reg_parm_stack_space(tree fun) -+{ -+ if (microblaze_function_parms_need_stack (fun,false)) -+ return MAX_ARGS_IN_REGISTERS * UNITS_PER_WORD; -+ else -+ return 0; -+} -+ - /* Return the bytes needed to compute the frame pointer from the current - stack pointer. - -@@ -3298,7 +3430,7 @@ microblaze_asm_output_mi_thunk (FILE *file, tree thunk_fndecl ATTRIBUTE_UNUSED, - emit_insn (gen_indirect_jump (temp2)); - - /* Run just enough of rest_of_compilation. This sequence was -- "borrowed" from rs6000.c. */ -+ "borrowed" from microblaze.c. */ - insn = get_insns (); - shorten_branches (insn); - final_start_function (insn, file, 1); -diff --git a/gcc/config/microblaze/microblaze.h b/gcc/config/microblaze/microblaze.h -index 88e0351..9f74ec8 100644 ---- a/gcc/config/microblaze/microblaze.h -+++ b/gcc/config/microblaze/microblaze.h -@@ -434,9 +434,9 @@ extern struct microblaze_frame_info current_frame_info; - - #define ARG_POINTER_CFA_OFFSET(FNDECL) 0 - --#define REG_PARM_STACK_SPACE(FNDECL) (MAX_ARGS_IN_REGISTERS * UNITS_PER_WORD) -+#define REG_PARM_STACK_SPACE(FNDECL) microblaze_reg_parm_stack_space(FNDECL) - --#define OUTGOING_REG_PARM_STACK_SPACE(FNTYPE) 1 -+#define OUTGOING_REG_PARM_STACK_SPACE(FNTYPE) 1 - - #define STACK_BOUNDARY 32 - --- -2.7.4 - diff --git a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0021-Patch-microblaze-Add-cbranchsi4_reg.patch b/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0021-Patch-microblaze-Add-cbranchsi4_reg.patch deleted file mode 100644 index b04ee580..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0021-Patch-microblaze-Add-cbranchsi4_reg.patch +++ /dev/null @@ -1,159 +0,0 @@ -From f846bd900d5277dd9defb5fe0625f97e3417ee61 Mon Sep 17 00:00:00 2001 -From: Mahesh Bodapati <mbodapat@xilinx.com> -Date: Tue, 17 Jan 2017 17:04:37 +0530 -Subject: [PATCH 21/54] [Patch, microblaze]: Add cbranchsi4_reg This patch - optimizes the generation of pcmpne/pcmpeq instruction if the compare - instruction has no immediate values.For the immediate values the xor - instruction is generated - -Signed-off-by: Nagaraju Mekala <nmekala@xilix.com> -Signed-off-by: Ajit Agarwal <ajitkum@xilinx.com> - -ChangeLog: -2015-01-13 Nagaraju Mekala <nmekala@xilix.com> - Ajit Agarwal <ajitkum@xilinx.com> - - *microblaze.md (cbranchsi4_reg): New - *microblaze.c (microblaze_expand_conditional_branch_reg): New - -Conflicts: - - gcc/config/microblaze/microblaze-protos.h ---- - gcc/config/microblaze/microblaze-protos.h | 2 +- - gcc/testsuite/gcc.target/microblaze/isa/fcmp1.c | 2 +- - gcc/testsuite/gcc.target/microblaze/isa/fcmp2.c | 2 +- - gcc/testsuite/gcc.target/microblaze/isa/fcmp3.c | 2 +- - gcc/testsuite/gcc.target/microblaze/isa/fcmp4.c | 2 +- - gcc/testsuite/gcc.target/microblaze/isa/nofcmp.c | 14 +++++++------- - gcc/testsuite/gcc.target/microblaze/isa/vanilla.c | 12 ++++++------ - gcc/testsuite/gcc.target/microblaze/others/builtin-trap.c | 2 +- - 8 files changed, 19 insertions(+), 19 deletions(-) - -diff --git a/gcc/config/microblaze/microblaze-protos.h b/gcc/config/microblaze/microblaze-protos.h -index f8a56f7..c39e2e9 100644 ---- a/gcc/config/microblaze/microblaze-protos.h -+++ b/gcc/config/microblaze/microblaze-protos.h -@@ -32,7 +32,7 @@ extern int microblaze_expand_shift (rtx *); - extern bool microblaze_expand_move (machine_mode, rtx *); - extern bool microblaze_expand_block_move (rtx, rtx, rtx, rtx); - extern void microblaze_expand_divide (rtx *); --extern void microblaze_expand_conditional_branch (machine_mode, rtx *); -+extern void microblaze_expand_conditional_branch (enum machine_mode, rtx *); - extern void microblaze_expand_conditional_branch_reg (machine_mode, rtx *); - extern void microblaze_expand_conditional_branch_sf (rtx *); - extern int microblaze_can_use_return_insn (void); -diff --git a/gcc/testsuite/gcc.target/microblaze/isa/fcmp1.c b/gcc/testsuite/gcc.target/microblaze/isa/fcmp1.c -index 4041a24..ccc6a46 100644 ---- a/gcc/testsuite/gcc.target/microblaze/isa/fcmp1.c -+++ b/gcc/testsuite/gcc.target/microblaze/isa/fcmp1.c -@@ -6,5 +6,5 @@ void float_func () - { - /* { dg-final { scan-assembler "fcmp\.(le|gt)\tr(\[0-9]\|\[1-2]\[0-9]\|3\[0-1]),r(\[0-9]\|\[1-2]\[0-9]\|3\[0-1]),r(\[0-9]\|\[1-2]\[0-9]\|3\[0-1])\[^0-9]" } } */ - if (f2 <= f3) -- print ("le"); -+ f2 = f3; - } -diff --git a/gcc/testsuite/gcc.target/microblaze/isa/fcmp2.c b/gcc/testsuite/gcc.target/microblaze/isa/fcmp2.c -index 3902b83..1dd5fe6 100644 ---- a/gcc/testsuite/gcc.target/microblaze/isa/fcmp2.c -+++ b/gcc/testsuite/gcc.target/microblaze/isa/fcmp2.c -@@ -6,5 +6,5 @@ void float_func () - { - /* { dg-final { scan-assembler "fcmp\.(lt|ge)\tr(\[0-9]\|\[1-2]\[0-9]\|3\[0-1]),r(\[0-9]\|\[1-2]\[0-9]\|3\[0-1]),r(\[0-9]\|\[1-2]\[0-9]\|3\[0-1])\[^0-9]" } } */ - if (f2 < f3) -- print ("lt"); -+ f2 = f3; - } -diff --git a/gcc/testsuite/gcc.target/microblaze/isa/fcmp3.c b/gcc/testsuite/gcc.target/microblaze/isa/fcmp3.c -index 8555974..d6f80fb 100644 ---- a/gcc/testsuite/gcc.target/microblaze/isa/fcmp3.c -+++ b/gcc/testsuite/gcc.target/microblaze/isa/fcmp3.c -@@ -6,5 +6,5 @@ void float_func () - { - /* { dg-final { scan-assembler "fcmp\.(eq|ne)\tr(\[0-9]\|\[1-2]\[0-9]\|3\[0-1]),r(\[0-9]\|\[1-2]\[0-9]\|3\[0-1]),r(\[0-9]\|\[1-2]\[0-9]\|3\[0-1])\[^0-9]" } } */ - if (f2 == f3) -- print ("eq"); -+ f1 = f2 + f3; - } -diff --git a/gcc/testsuite/gcc.target/microblaze/isa/fcmp4.c b/gcc/testsuite/gcc.target/microblaze/isa/fcmp4.c -index 79cc5f9..d117724 100644 ---- a/gcc/testsuite/gcc.target/microblaze/isa/fcmp4.c -+++ b/gcc/testsuite/gcc.target/microblaze/isa/fcmp4.c -@@ -5,5 +5,5 @@ void float_func(float f1, float f2, float f3) - /* { dg-final { scan-assembler "fcmp\.eq\tr(\[0-9]\|\[1-2]\[0-9]\|3\[0-1]),r(\[0-9]\|\[1-2]\[0-9]\|3\[0-1]),r(\[0-9]\|\[1-2]\[0-9]\|3\[0-1])\[^0-9]" } } */ - /* { dg-final { scan-assembler "fcmp\.le\tr(\[0-9]\|\[1-2]\[0-9]\|3\[0-1]),r(\[0-9]\|\[1-2]\[0-9]\|3\[0-1]),r(\[0-9]\|\[1-2]\[0-9]\|3\[0-1])\[^0-9]" } } */ - if(f1==f2 && f1<=f3) -- print ("f1 eq f2 && f1 le f3"); -+ f2 = f3; - } -diff --git a/gcc/testsuite/gcc.target/microblaze/isa/nofcmp.c b/gcc/testsuite/gcc.target/microblaze/isa/nofcmp.c -index ebfb170..7582297 100644 ---- a/gcc/testsuite/gcc.target/microblaze/isa/nofcmp.c -+++ b/gcc/testsuite/gcc.target/microblaze/isa/nofcmp.c -@@ -5,17 +5,17 @@ volatile float f1, f2, f3; - void float_func () - { - /* { dg-final { scan-assembler-not "fcmp" } } */ -- if (f2 <= f3) -- print ("le"); -+ if (f2 <= f3) -+ f1 = f3; - else if (f2 == f3) -- print ("eq"); -+ f1 = f3; - else if (f2 < f3) -- print ("lt"); -+ f1 = f3; - else if (f2 > f3) -- print ("gt"); -+ f1 = f3; - else if (f2 >= f3) -- print ("ge"); -+ f1 = f3; - else if (f2 != f3) -- print ("ne"); -+ f1 = f3; - - } -diff --git a/gcc/testsuite/gcc.target/microblaze/isa/vanilla.c b/gcc/testsuite/gcc.target/microblaze/isa/vanilla.c -index 1d6ba80..532c035 100644 ---- a/gcc/testsuite/gcc.target/microblaze/isa/vanilla.c -+++ b/gcc/testsuite/gcc.target/microblaze/isa/vanilla.c -@@ -74,16 +74,16 @@ void float_cmp_func () - { - /* { dg-final { scan-assembler-not "fcmp" } } */ - if (f2 <= f3) -- print ("le"); -+ f1 = f3; - else if (f2 == f3) -- print ("eq"); -+ f1 = f3; - else if (f2 < f3) -- print ("lt"); -+ f1 = f3; - else if (f2 > f3) -- print ("gt"); -+ f1 = f3; - else if (f2 >= f3) -- print ("ge"); -+ f1 = f3; - else if (f2 != f3) -- print ("ne"); -+ f1 = f3; - - } -diff --git a/gcc/testsuite/gcc.target/microblaze/others/builtin-trap.c b/gcc/testsuite/gcc.target/microblaze/others/builtin-trap.c -index fdcde1f..580b4db 100644 ---- a/gcc/testsuite/gcc.target/microblaze/others/builtin-trap.c -+++ b/gcc/testsuite/gcc.target/microblaze/others/builtin-trap.c -@@ -5,4 +5,4 @@ void trap () - __builtin_trap (); - } - --/* { dg-final { scan-assembler "brki\tr0,-1" } } */ -\ No newline at end of file -+/* { dg-final { scan-assembler "bri\t0" } } */ --- -2.7.4 - diff --git a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0022-Patch-microblaze-Inline-Expansion-of-fsqrt-builtin.patch b/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0022-Patch-microblaze-Inline-Expansion-of-fsqrt-builtin.patch deleted file mode 100644 index beeb80fd..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0022-Patch-microblaze-Inline-Expansion-of-fsqrt-builtin.patch +++ /dev/null @@ -1,58 +0,0 @@ -From 7d70a287544dd915b66a5658a3857ebecb8b3583 Mon Sep 17 00:00:00 2001 -From: Mahesh Bodapati <mbodapat@xilinx.com> -Date: Tue, 17 Jan 2017 17:11:04 +0530 -Subject: [PATCH 22/54] [Patch,microblaze]: Inline Expansion of fsqrt builtin. - The changes are made in the patch for the inline expansion of the fsqrt - builtin with fqrt instruction. The sqrt math function takes double as - argument and return double as argument. The pattern is selected while - expanding the unary op through expand_unop which passes DFmode and the DFmode - pattern was not there returning zero. Thus the sqrt math function is not - inlined and expanded. The pattern with DFmode argument is added. Also the - source and destination argument is not same the DF through two different - consecutive registers with lower 32 bit is the argument passed to sqrt and - the higher 32 bit is zero. If the source and destinations are different the - DFmode 64 bits registers is not set properly giving the problem in runtime. - Such changes are taken care in the implementation of the pattern for DFmode - for inline expansion of the sqrt. - -ChangeLog: -2015-06-16 Ajit Agarwal <ajitkum@xilinx.com> - Nagaraju Mekala <nmekala@xilinx.com> - - * config/microblaze/microblaze.md (sqrtdf2): New - pattern. - -Signed-off-by:Ajit Agarwal ajitkum@xilinx.com - Nagaraju Mekala nmekala@xilinx.com ---- - gcc/config/microblaze/microblaze.md | 14 ++++++++++++++ - 1 file changed, 14 insertions(+) - -diff --git a/gcc/config/microblaze/microblaze.md b/gcc/config/microblaze/microblaze.md -index 7bbdbe1..3a53e24 100644 ---- a/gcc/config/microblaze/microblaze.md -+++ b/gcc/config/microblaze/microblaze.md -@@ -449,6 +449,20 @@ - (set_attr "mode" "SF") - (set_attr "length" "4")]) - -+(define_insn "sqrtdf2" -+ [(set (match_operand:DF 0 "register_operand" "=d") -+ (sqrt:DF (match_operand:DF 1 "register_operand" "dG")))] -+ "TARGET_HARD_FLOAT && TARGET_FLOAT_SQRT" -+ { -+ if (REGNO (operands[0]) == REGNO (operands[1])) -+ return "fsqrt\t%0,%1"; -+ else -+ return "fsqrt\t%0,%1\n\taddk\t%D0,%D1,r0"; -+ } -+ [(set_attr "type" "fsqrt") -+ (set_attr "mode" "SF") -+ (set_attr "length" "4")]) -+ - (define_insn "fix_truncsfsi2" - [(set (match_operand:SI 0 "register_operand" "=d") - (fix:SI (match_operand:SF 1 "register_operand" "d")))] --- -2.7.4 - diff --git a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0023-Patch-OPT-Update-heuristics-for-loop-invariant-for-a.patch b/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0023-Patch-OPT-Update-heuristics-for-loop-invariant-for-a.patch deleted file mode 100644 index 8f5bed52..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0023-Patch-OPT-Update-heuristics-for-loop-invariant-for-a.patch +++ /dev/null @@ -1,47 +0,0 @@ -From a28768eec0a9d5137196bed8e8c6d284cf4c3cbc Mon Sep 17 00:00:00 2001 -From: Mahesh Bodapati <mbodapat@xilinx.com> -Date: Tue, 17 Jan 2017 17:33:31 +0530 -Subject: [PATCH 23/54] [Patch] OPT: Update heuristics for loop-invariant for - address arithme. .tic. - -The changes are made in the patch to update the heuristics -for loop invariant for address arithmetic. The heuristics is -changed to calculate the estimated register pressure cost when -ira based register pressure is not enabled. The estimated -register pressure cost modifies the existing calculation cost -associated to perform the Loop invariant code motion for address -arithmetic. - -ChangeLog: -2015-06-17 Ajit Agarwal <ajitkum@xilinx.com> - Nagaraju Mekala <nmekala@xilinx.com> - - * loop-invariant.c (gain_for_invariant): update the - heuristics for estimate_reg_pressure_cost. - -Signed-off-by:Ajit Agarwal ajitkum@xilinx.com - Nagaraju Mekala nmekala@xilinx.com ---- - gcc/loop-invariant.c | 6 ++---- - 1 file changed, 2 insertions(+), 4 deletions(-) - -diff --git a/gcc/loop-invariant.c b/gcc/loop-invariant.c -index bd31a51..8e22ca0 100644 ---- a/gcc/loop-invariant.c -+++ b/gcc/loop-invariant.c -@@ -1466,10 +1466,8 @@ gain_for_invariant (struct invariant *inv, unsigned *regs_needed, - - if (! flag_ira_loop_pressure) - { -- size_cost = (estimate_reg_pressure_cost (new_regs[0] + regs_needed[0], -- regs_used, speed, call_p) -- - estimate_reg_pressure_cost (new_regs[0], -- regs_used, speed, call_p)); -+ size_cost = estimate_reg_pressure_cost (regs_needed[0], -+ regs_used, speed, call_p); - } - else if (ret < 0) - return -1; --- -2.7.4 - diff --git a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0024-PATCH-microblaze.md-Improve-adddi3-and-subdi3-insn-d.patch b/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0024-PATCH-microblaze.md-Improve-adddi3-and-subdi3-insn-d.patch deleted file mode 100644 index 85a749e5..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0024-PATCH-microblaze.md-Improve-adddi3-and-subdi3-insn-d.patch +++ /dev/null @@ -1,63 +0,0 @@ -From be9c512be09fa4ef67870ab0456eb3781394dac3 Mon Sep 17 00:00:00 2001 -From: Mahesh Bodapati <mbodapat@xilinx.com> -Date: Tue, 17 Jan 2017 18:07:24 +0530 -Subject: [PATCH 24/54] [PATCH] microblaze.md: Improve 'adddi3' and 'subdi3' - insn definitions Change adddi3 to handle DI immediates as the second operand, - this requires modification to the output template however reduces the need to - specify seperate templates for 16-bit positive/negative immediate operands. - The use of 32-bit immediates for the addi and addic instructions is handled - by the assembler, which will emit the imm instructions when required. This - conveniently handles the optimizable cases where the immediate constant value - does not need the higher half words of the operands upper/lower words. - -Change the constraints of the subdi3 instruction definition such that it -does not match the second operand as an immediate value. This is because -there is no definition to handle this case nor is it possible to -implement purely with instructions as microblaze does not provide an -instruction to perform a forward arithmetic subtraction (it only -provides reverse 'rD = IMM - rA'). - -Signed-off-by: Nathan Rossi <nathan@nathanrossi.com> ---- - gcc/config/microblaze/microblaze.md | 13 ++++++------- - 1 file changed, 6 insertions(+), 7 deletions(-) - -diff --git a/gcc/config/microblaze/microblaze.md b/gcc/config/microblaze/microblaze.md -index 3a53e24..949e103 100644 ---- a/gcc/config/microblaze/microblaze.md -+++ b/gcc/config/microblaze/microblaze.md -@@ -500,17 +500,16 @@ - ;; Adding 2 DI operands in register or reg/imm - - (define_insn "adddi3" -- [(set (match_operand:DI 0 "register_operand" "=d,d,d") -- (plus:DI (match_operand:DI 1 "register_operand" "%d,d,d") -- (match_operand:DI 2 "arith_operand32" "d,P,N")))] -+ [(set (match_operand:DI 0 "register_operand" "=d,d") -+ (plus:DI (match_operand:DI 1 "register_operand" "%d,d") -+ (match_operand:DI 2 "arith_operand" "d,i")))] - "" - "@ - add\t%L0,%L1,%L2\;addc\t%M0,%M1,%M2 -- addi\t%L0,%L1,%2\;addc\t%M0,%M1,r0 -- addi\t%L0,%L1,%2\;addc\t%M0,%M1,r0\;addi\t%M0,%M0,-1" -+ addi\t%L0,%L1,%j2\;addic\t%M0,%M1,%h2" - [(set_attr "type" "darith") - (set_attr "mode" "DI") -- (set_attr "length" "8,8,12")]) -+ (set_attr "length" "8,8")]) - - ;;---------------------------------------------------------------- - ;; Subtraction -@@ -547,7 +546,7 @@ - (define_insn "subdi3" - [(set (match_operand:DI 0 "register_operand" "=&d") - (minus:DI (match_operand:DI 1 "register_operand" "d") -- (match_operand:DI 2 "arith_operand32" "d")))] -+ (match_operand:DI 2 "register_operand" "d")))] - "" - "rsub\t%L0,%L2,%L1\;rsubc\t%M0,%M2,%M1" - [(set_attr "type" "darith") --- -2.7.4 - diff --git a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0025-Patch-microblaze-Update-ashlsi3-movsf-patterns.patch b/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0025-Patch-microblaze-Update-ashlsi3-movsf-patterns.patch deleted file mode 100644 index 17f25448..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0025-Patch-microblaze-Update-ashlsi3-movsf-patterns.patch +++ /dev/null @@ -1,72 +0,0 @@ -From c8ee051fa3e0ad05b19eb6141a7cb72245b412b7 Mon Sep 17 00:00:00 2001 -From: Mahesh Bodapati <mbodapat@xilinx.com> -Date: Tue, 17 Jan 2017 18:18:41 +0530 -Subject: [PATCH 25/54] [Patch, microblaze]: Update ashlsi3 & movsf patterns - This patch removes the use of HOST_WIDE_INT_PRINT_HEX macro in print_operand - of ashlsi3_with_mul_nodelay,ashlsi3_with_mul_delay and movsf_internal - patterns beacuse HOST_WIDE_INT_PRINT_HEX is generating 64-bit value which our - instruction doesn't support so using gen_int_mode function - -Signed-off-by :Nagaraju Mekala <nmekala@xilix.com> - :Ajit Agarwal <ajitkum@xilinx.com> - -ChangeLog: -2016-01-07 Nagaraju Mekala <nmekala@xilix.com> - Ajit Agarwal <ajitkum@xilinx.com> - - *microblaze.md (ashlsi3_with_mul_nodelay, - ashlsi3_with_mul_delay, - movsf_internal): - Updated the patterns to use gen_int_mode function - *microblaze.c (print_operand): - updated the 'F' case to use "unsinged int" instead - of HOST_WIDE_INT_PRINT_HEX ---- - gcc/config/microblaze/microblaze.c | 2 +- - gcc/config/microblaze/microblaze.md | 10 ++++++++-- - 2 files changed, 9 insertions(+), 3 deletions(-) - -diff --git a/gcc/config/microblaze/microblaze.c b/gcc/config/microblaze/microblaze.c -index 0dec362..daf0269 100644 ---- a/gcc/config/microblaze/microblaze.c -+++ b/gcc/config/microblaze/microblaze.c -@@ -2531,7 +2531,7 @@ print_operand (FILE * file, rtx op, int letter) - unsigned long value_long; - REAL_VALUE_TO_TARGET_SINGLE (*CONST_DOUBLE_REAL_VALUE (op), - value_long); -- fprintf (file, HOST_WIDE_INT_PRINT_HEX, value_long); -+ fprintf (file, "0x%08x", (unsigned int) value_long); - } - else - { -diff --git a/gcc/config/microblaze/microblaze.md b/gcc/config/microblaze/microblaze.md -index 949e103..bc675ca 100644 ---- a/gcc/config/microblaze/microblaze.md -+++ b/gcc/config/microblaze/microblaze.md -@@ -1366,7 +1366,10 @@ - (match_operand:SI 2 "immediate_operand" "I")))] - "!TARGET_SOFT_MUL - && ((1 << INTVAL (operands[2])) <= 32767 && (1 << INTVAL (operands[2])) >= -32768)" -- "muli\t%0,%1,%m2" -+ { -+ operands[2] = gen_int_mode (1 << INTVAL (operands[2]), SImode); -+ return "muli\t%0,%1,%2"; -+ } - ;; This MUL will not generate an imm. Can go into a delay slot. - [(set_attr "type" "arith") - (set_attr "mode" "SI") -@@ -1378,7 +1381,10 @@ - (ashift:SI (match_operand:SI 1 "register_operand" "d") - (match_operand:SI 2 "immediate_operand" "I")))] - "!TARGET_SOFT_MUL" -- "muli\t%0,%1,%m2" -+ { -+ operands[2] = gen_int_mode (1 << INTVAL (operands[2]), SImode); -+ return "muli\t%0,%1,%2"; -+ } - ;; This MUL will generate an IMM. Cannot go into a delay slot - [(set_attr "type" "no_delay_arith") - (set_attr "mode" "SI") --- -2.7.4 - diff --git a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0026-Patch-microblaze-8-stage-pipeline-for-microblaze.patch b/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0026-Patch-microblaze-8-stage-pipeline-for-microblaze.patch deleted file mode 100644 index 506714bd..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0026-Patch-microblaze-8-stage-pipeline-for-microblaze.patch +++ /dev/null @@ -1,193 +0,0 @@ -From 64e76f3be6ad78044ea2b89b555a07758c2b2950 Mon Sep 17 00:00:00 2001 -From: Mahesh Bodapati <mbodapat@xilinx.com> -Date: Tue, 17 Jan 2017 19:50:34 +0530 -Subject: [PATCH 26/54] [Patch, microblaze]: 8-stage pipeline for microblaze - This patch adds the support for the 8-stage pipeline. The new 8-stage - pipeline reduces the latencies of float & integer division drastically - -Signed-off-by :Nagaraju Mekala <nmekala@xilix.com> - -ChangeLog: -2016-01-18 Nagaraju Mekala <nmekala@xilix.com> - - *microblaze.md (define_automaton mbpipe_8): New - - *microblaze.c (microblaze_option_override): Update - Updated the logic to generate only when MB version is 10.0 - - *microblaze.h (pipeline_type): Update - Update the enum with MICROBLAZE_PIPE_8 - - *microblaze.opt (mxl-frequency): New - New flag added for 8-stage pipeline ---- - gcc/config/microblaze/microblaze.c | 13 ++++++ - gcc/config/microblaze/microblaze.h | 3 +- - gcc/config/microblaze/microblaze.md | 79 +++++++++++++++++++++++++++++++++++- - gcc/config/microblaze/microblaze.opt | 4 ++ - 4 files changed, 96 insertions(+), 3 deletions(-) - -diff --git a/gcc/config/microblaze/microblaze.c b/gcc/config/microblaze/microblaze.c -index daf0269..3832d16 100644 ---- a/gcc/config/microblaze/microblaze.c -+++ b/gcc/config/microblaze/microblaze.c -@@ -1772,6 +1772,19 @@ microblaze_option_override (void) - warning (0, "-mxl-reorder requires -mxl-pattern-compare for -mcpu=v8.30.a"); - TARGET_REORDER = 0; - } -+ ver = ver_int - microblaze_version_to_int("v10.0"); -+ if (ver < 0) -+ { -+ if (TARGET_AREA_OPTIMIZED_2) -+ warning (0, "-mxl-frequency can be used only with -mcpu=v10.0 or greater"); -+ } -+ else -+ { -+ if (TARGET_AREA_OPTIMIZED_2) -+ microblaze_pipe = MICROBLAZE_PIPE_8; -+ if (TARGET_BARREL_SHIFT) -+ microblaze_has_bitfield = 1; -+ } - - if (TARGET_MULTIPLY_HIGH && TARGET_SOFT_MUL) - error ("-mxl-multiply-high requires -mno-xl-soft-mul"); -diff --git a/gcc/config/microblaze/microblaze.h b/gcc/config/microblaze/microblaze.h -index 9f74ec8..2ac5aeec 100644 ---- a/gcc/config/microblaze/microblaze.h -+++ b/gcc/config/microblaze/microblaze.h -@@ -27,7 +27,8 @@ - enum pipeline_type - { - MICROBLAZE_PIPE_3 = 0, -- MICROBLAZE_PIPE_5 = 1 -+ MICROBLAZE_PIPE_5 = 1, -+ MICROBLAZE_PIPE_8 = 2 - }; - - #define MICROBLAZE_MASK_NO_UNSAFE_DELAY 0x00000001 -diff --git a/gcc/config/microblaze/microblaze.md b/gcc/config/microblaze/microblaze.md -index bc675ca..6395533 100644 ---- a/gcc/config/microblaze/microblaze.md -+++ b/gcc/config/microblaze/microblaze.md -@@ -35,6 +35,7 @@ - (R_GOT 20) ;; GOT ptr reg - (MB_PIPE_3 0) ;; Microblaze 3-stage pipeline - (MB_PIPE_5 1) ;; Microblaze 5-stage pipeline -+ (MB_PIPE_8 2) ;; Microblaze 8-stage pipeline - (UNSPEC_SET_GOT 101) ;; - (UNSPEC_GOTOFF 102) ;; GOT offset - (UNSPEC_PLT 103) ;; jump table -@@ -80,7 +81,7 @@ - ;; bshift Shift operations - - (define_attr "type" -- "unknown,branch,jump,call,load,store,move,arith,darith,imul,idiv,icmp,multi,nop,no_delay_arith,no_delay_load,no_delay_store,no_delay_imul,no_delay_move,bshift,fadd,frsub,fmul,fdiv,fcmp,fsl,fsqrt,fcvt,trap" -+ "unknown,branch,jump,call,load,store,move,arith,darith,imul,idiv,icmp,multi,nop,no_delay_arith,no_delay_load,no_delay_store,no_delay_imul,no_delay_move,bshift,fadd,frsub,fmul,fdiv,fcmp,fsl,fsqrt,fcvt,fint,trap" - (const_string "unknown")) - - ;; Main data type used by the insn -@@ -222,6 +223,80 @@ - ;;----------------------------------------------------------------- - - -+ -+;;---------------------------------------------------------------- -+;; Microblaze 8-stage pipeline description (v10.0 and later) -+;;---------------------------------------------------------------- -+ -+(define_automaton "mbpipe_8") -+(define_cpu_unit "mb8_issue,mb8_iu,mb8_wb,mb8_fpu,mb8_fpu_2,mb8_mul,mb8_mul_2,mb8_div,mb8_div_2,mb8_bs,mb8_bs_2" "mbpipe_8") -+ -+(define_insn_reservation "mb8-integer" 1 -+ (and (eq_attr "type" "branch,jump,call,arith,darith,icmp,nop,no_delay_arith") -+ (eq (symbol_ref "microblaze_pipe") (const_int MB_PIPE_8))) -+ "mb8_issue,mb8_iu,mb8_wb") -+ -+(define_insn_reservation "mb8-special-move" 2 -+ (and (eq_attr "type" "move") -+ (eq (symbol_ref "microblaze_pipe") (const_int MB_PIPE_8))) -+ "mb8_issue,mb8_iu*2,mb8_wb") -+ -+(define_insn_reservation "mb8-mem-load" 3 -+ (and (eq_attr "type" "load,no_delay_load") -+ (eq (symbol_ref "microblaze_pipe") (const_int MB_PIPE_8))) -+ "mb8_issue,mb8_iu,mb8_wb") -+ -+(define_insn_reservation "mb8-mem-store" 1 -+ (and (eq_attr "type" "store,no_delay_store") -+ (eq (symbol_ref "microblaze_pipe") (const_int MB_PIPE_8))) -+ "mb8_issue,mb8_iu,mb8_wb") -+ -+(define_insn_reservation "mb8-mul" 3 -+ (and (eq_attr "type" "imul,no_delay_imul") -+ (eq (symbol_ref "microblaze_pipe") (const_int MB_PIPE_8))) -+ "mb8_issue,mb8_mul,mb8_mul_2*2,mb8_wb") -+ -+(define_insn_reservation "mb8-div" 30 -+ (and (eq_attr "type" "idiv") -+ (eq (symbol_ref "microblaze_pipe") (const_int MB_PIPE_8))) -+ "mb8_issue,mb8_div,mb8_div_2*29,mb8_wb") -+ -+(define_insn_reservation "mb8-bs" 2 -+ (and (eq_attr "type" "bshift") -+ (eq (symbol_ref "microblaze_pipe") (const_int MB_PIPE_8))) -+ "mb8_issue,mb8_bs,mb8_bs_2,mb8_wb") -+ -+(define_insn_reservation "mb8-fpu-add-sub-mul" 1 -+ (and (eq_attr "type" "fadd,frsub,fmul") -+ (eq (symbol_ref "microblaze_pipe") (const_int MB_PIPE_8))) -+ "mb8_issue,mb8_fpu,mb8_wb") -+ -+(define_insn_reservation "mb8-fpu-fcmp" 3 -+ (and (eq_attr "type" "fcmp") -+ (eq (symbol_ref "microblaze_pipe") (const_int MB_PIPE_8))) -+ "mb8_issue,mb8_fpu,mb8_fpu*2,mb8_wb") -+ -+(define_insn_reservation "mb8-fpu-div" 24 -+ (and (eq_attr "type" "fdiv") -+ (eq (symbol_ref "microblaze_pipe") (const_int MB_PIPE_8))) -+ "mb8_issue,mb8_fpu,mb8_fpu_2*23,mb8_wb") -+ -+(define_insn_reservation "mb8-fpu-sqrt" 23 -+ (and (eq_attr "type" "fsqrt") -+ (eq (symbol_ref "microblaze_pipe") (const_int MB_PIPE_8))) -+ "mb8_issue,mb8_fpu,mb8_fpu_2*22,mb8_wb") -+ -+(define_insn_reservation "mb8-fpu-fcvt" 1 -+ (and (eq_attr "type" "fcvt") -+ (eq (symbol_ref "microblaze_pipe") (const_int MB_PIPE_8))) -+ "mb8_issue,mb8_fpu,mb8_wb") -+ -+(define_insn_reservation "mb8-fpu-fint" 2 -+ (and (eq_attr "type" "fint") -+ (eq (symbol_ref "microblaze_pipe") (const_int MB_PIPE_8))) -+ "mb8_issue,mb8_fpu,mb8_wb") -+ -+ - ;;---------------------------------------------------------------- - ;; Microblaze 5-stage pipeline description (v5.00.a and later) - ;;---------------------------------------------------------------- -@@ -468,7 +543,7 @@ - (fix:SI (match_operand:SF 1 "register_operand" "d")))] - "TARGET_HARD_FLOAT && TARGET_FLOAT_CONVERT" - "fint\t%0,%1" -- [(set_attr "type" "fcvt") -+ [(set_attr "type" "fint") - (set_attr "mode" "SF") - (set_attr "length" "4")]) - -diff --git a/gcc/config/microblaze/microblaze.opt b/gcc/config/microblaze/microblaze.opt -index 8242998..c8e6f00 100644 ---- a/gcc/config/microblaze/microblaze.opt -+++ b/gcc/config/microblaze/microblaze.opt -@@ -129,3 +129,7 @@ Use hardware prefetch instruction - - mxl-mode-xilkernel - Target -+ -+mxl-frequency -+Target Mask(AREA_OPTIMIZED_2) -+Use 8 stage pipeline (frequency optimization) --- -2.7.4 - diff --git a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0027-Patch-rtl-Optimization-Better-register-pressure-esti.patch b/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0027-Patch-rtl-Optimization-Better-register-pressure-esti.patch deleted file mode 100644 index 95b9b2aa..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0027-Patch-rtl-Optimization-Better-register-pressure-esti.patch +++ /dev/null @@ -1,142 +0,0 @@ -From 5147c831c6a78d9b95138b679bb2ca7624abc3a1 Mon Sep 17 00:00:00 2001 -From: Mahesh Bodapati <mbodapat@xilinx.com> -Date: Wed, 18 Jan 2017 11:08:40 +0530 -Subject: [PATCH 27/54] [Patch,rtl Optimization]: Better register pressure - estimate for loop . .invariant code motion - -Calculate the loop liveness used for regs for calculating the register pressure -in the cost estimation. Loop liveness is based on the following properties. -We only need to find the set of objects that are live at the birth or the header -of the loop. We don't need to calculate the live through the loop by considering -live in and live out of all the basic blocks of the loop. This is based on the -point that the set of objects that are live-in at the birth or header of the loop -will be live-in at every node in the loop. - -If a v live is out at the header of the loop then the variable is live-in at every node -in the loop. To prove this, consider a loop L with header h such that the variable v -defined at d is live-in at h. Since v is live at h, d is not part of L. This follows i -from the dominance property, i.e. h is strictly dominated by d. Furthermore, there -exists a path from h to a use of v which does not go through d. For every node p in -the loop, since the loop is strongly connected and node is a component of the CFG, -there exists a path, consisting only of nodes of L from p to h. Concatenating these -two paths proves that v is live-in and live-out of p. - -Calculate the live-out and live-in for the exit edge of the loop. This patch considers -liveness for not only the loop latch but also the liveness outside the loops. - -ChangeLog: -2016-01-22 Ajit Agarwal <ajitkum@xilinx.com> - - * loop-invariant.c - (find_invariants_to_move): Add the logic of regs_used based - on liveness. - * cfgloopanal.c - (estimate_reg_pressure_cost): Update the heuristics in presence - of call_p. - -Signed-off-by:Ajit Agarwal ajitkum@xilinx.com. ---- - gcc/cfgloopanal.c | 4 +++- - gcc/loop-invariant.c | 63 +++++++++++++++++++++++++++++++++++++++------------- - 2 files changed, 50 insertions(+), 17 deletions(-) - -diff --git a/gcc/cfgloopanal.c b/gcc/cfgloopanal.c -index 3af0b2d..123dc6b 100644 ---- a/gcc/cfgloopanal.c -+++ b/gcc/cfgloopanal.c -@@ -411,7 +411,9 @@ estimate_reg_pressure_cost (unsigned n_new, unsigned n_old, bool speed, - if (regs_needed + target_res_regs <= available_regs) - return 0; - -- if (regs_needed <= available_regs) -+ if ((regs_needed <= available_regs) -+ || (call_p && (regs_needed <= -+ (available_regs + target_clobbered_regs)))) - /* If we are close to running out of registers, try to preserve - them. */ - cost = target_reg_cost [speed] * n_new; -diff --git a/gcc/loop-invariant.c b/gcc/loop-invariant.c -index 8e22ca0..c9ec8df 100644 ---- a/gcc/loop-invariant.c -+++ b/gcc/loop-invariant.c -@@ -1520,7 +1520,7 @@ gain_for_invariant (struct invariant *inv, unsigned *regs_needed, - size_cost = 0; - } - -- return comp_cost - size_cost; -+ return comp_cost - size_cost + 1; - } - - /* Finds invariant with best gain for moving. Returns the gain, stores -@@ -1614,22 +1614,53 @@ find_invariants_to_move (bool speed, bool call_p) - /* REGS_USED is actually never used when the flag is on. */ - regs_used = 0; - else -- /* We do not really do a good job in estimating number of -- registers used; we put some initial bound here to stand for -- induction variables etc. that we do not detect. */ -+ /* The logic used in estimating the number of regs_used is changed. -+ Now it will be based on liveness of the loop. */ - { -- unsigned int n_regs = DF_REG_SIZE (df); -- -- regs_used = 2; -- -- for (i = 0; i < n_regs; i++) -- { -- if (!DF_REGNO_FIRST_DEF (i) && DF_REGNO_LAST_USE (i)) -- { -- /* This is a value that is used but not changed inside loop. */ -- regs_used++; -- } -- } -+ int i; -+ edge e; -+ vec<edge> edges; -+ bitmap_head regs_live; -+ -+ bitmap_initialize (®s_live, ®_obstack); -+ edges = get_loop_exit_edges (curr_loop); -+ -+ /* Loop liveness is based on the following properties. -+ We only need to find the set of objects that are live at the -+ birth or the header of the loop. -+ We don't need to calculate the live through the loop considering -+ live-in and live-out of all the basic blocks of the loop. This is -+ based on the point that the set of objects that are live-in at the -+ birth or header of the loop will be live-in at every block in the -+ loop. -+ -+ If a v live out at the header of the loop then the variable is -+ live-in at every node in the Loop. To prove this, consider a loop -+ L with header h such that the variable v defined at d is live-in -+ at h. Since v is live at h, d is not part of L. This follows from -+ the dominance property, i.e. h is strictly dominated by d. Furthermore, -+ there exists a path from h to a use of v which does not go through d. -+ For every node of the loop, p, since the loop is strongly connected -+ component of the CFG, there exists a path, consisting only of nodes -+ of L from p to h. Concatenating these two paths prove that v is -+ live-in and live-out of p. */ -+ -+ bitmap_ior_into (®s_live, DF_LR_IN (curr_loop->header)); -+ bitmap_ior_into (®s_live, DF_LR_OUT (curr_loop->header)); -+ -+ /* Calculate the live-out and live-in for the exit edge of the loop. -+ This considers liveness for not only the loop latch but also the -+ liveness outside the loops. */ -+ -+ FOR_EACH_VEC_ELT (edges, i, e) -+ { -+ bitmap_ior_into (®s_live, DF_LR_OUT (e->src)); -+ bitmap_ior_into (®s_live, DF_LR_IN (e->dest)); -+ } -+ -+ regs_used = bitmap_count_bits (®s_live) + 2; -+ bitmap_clear (®s_live); -+ edges.release (); - } - - if (! flag_ira_loop_pressure) --- -2.7.4 - diff --git a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0028-Patch-microblaze-Correct-the-const-high-double-immed.patch b/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0028-Patch-microblaze-Correct-the-const-high-double-immed.patch deleted file mode 100644 index 3643ff19..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0028-Patch-microblaze-Correct-the-const-high-double-immed.patch +++ /dev/null @@ -1,69 +0,0 @@ -From 2715b235b3db423bf35b9304a2ba5daa86b1680e Mon Sep 17 00:00:00 2001 -From: Mahesh Bodapati <mbodapat@xilinx.com> -Date: Wed, 18 Jan 2017 11:25:48 +0530 -Subject: [PATCH 28/54] [Patch, microblaze]: Correct the const high double - immediate value With this patch the loading of the DI mode immediate values - will be using REAL_VALUE_FROM_CONST_DOUBLE and REAL_VALUE_TO_TARGET_DOUBLE - functions, as CONST_DOUBLE_HIGH was returning the sign extension value even - of the unsigned long long constants also - -Signed-off-by :Nagaraju Mekala <nmekala@xilix.com> - Ajit Agarwal <ajitkum@xilinx.com> - -ChangeLog: -2016-02-03 Nagaraju Mekala <nmekala@xilix.com> - Ajit Agarwal <ajitkum@xilinx.com> - - *microblaze.c (print_operand): Use REAL_VALUE_FROM_CONST_DOUBLE & - REAL_VALUE_TO_TARGET_DOUBLE - *long.c (new): Added new testcase ---- - gcc/config/microblaze/microblaze.c | 8 ++++++-- - gcc/testsuite/gcc.target/microblaze/long.c | 10 ++++++++++ - 2 files changed, 16 insertions(+), 2 deletions(-) - create mode 100644 gcc/testsuite/gcc.target/microblaze/long.c - -diff --git a/gcc/config/microblaze/microblaze.c b/gcc/config/microblaze/microblaze.c -index 3832d16..29cd54f 100644 ---- a/gcc/config/microblaze/microblaze.c -+++ b/gcc/config/microblaze/microblaze.c -@@ -2517,14 +2517,18 @@ print_operand (FILE * file, rtx op, int letter) - else if (letter == 'h' || letter == 'j') - { - long val[2]; -+ long l[2]; - if (code == CONST_DOUBLE) - { - if (GET_MODE (op) == DFmode) - REAL_VALUE_TO_TARGET_DOUBLE (*CONST_DOUBLE_REAL_VALUE (op), val); - else - { -- val[0] = CONST_DOUBLE_HIGH (op); -- val[1] = CONST_DOUBLE_LOW (op); -+ REAL_VALUE_TYPE rv; -+ REAL_VALUE_FROM_CONST_DOUBLE (rv, op); -+ REAL_VALUE_TO_TARGET_DOUBLE (rv, l); -+ val[1] = l[WORDS_BIG_ENDIAN == 0]; -+ val[0] = l[WORDS_BIG_ENDIAN != 0]; - } - } - else if (code == CONST_INT) -diff --git a/gcc/testsuite/gcc.target/microblaze/long.c b/gcc/testsuite/gcc.target/microblaze/long.c -new file mode 100644 -index 0000000..4d45186 ---- /dev/null -+++ b/gcc/testsuite/gcc.target/microblaze/long.c -@@ -0,0 +1,10 @@ -+/* { dg-options "-O0" } */ -+#define BASEADDR 0xF0000000ULL -+int main () -+{ -+ unsigned long long start; -+ start = (unsigned long long) BASEADDR; -+ return 0; -+} -+/* { dg-final { scan-assembler "addik\tr(\[0-9]\|\[1-2]\[0-9]\|3\[0-1]),r0,0x00000000" } } */ -+/* { dg-final { scan-assembler "addik\tr(\[0-9]\|\[1-2]\[0-9]\|3\[0-1]),r0,0xf0000000" } } */ --- -2.7.4 - diff --git a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0029-Fix-microblaze-Fix-internal-compiler-error-with-msma.patch b/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0029-Fix-microblaze-Fix-internal-compiler-error-with-msma.patch deleted file mode 100644 index b4b9d2ec..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0029-Fix-microblaze-Fix-internal-compiler-error-with-msma.patch +++ /dev/null @@ -1,36 +0,0 @@ -From 7e025a0b22eee87bf9597267918bd16fc87c85c2 Mon Sep 17 00:00:00 2001 -From: Mahesh Bodapati <mbodapat@xilinx.com> -Date: Wed, 18 Jan 2017 11:49:58 +0530 -Subject: [PATCH 29/54] [Fix, microblaze]: Fix internal compiler error with - msmall-divides This patch will fix the internal error - microblaze_expand_divide function which comes because of rtx PLUS where the - mem_rtx is of type SI and the operand is of type QImode. This patch modifies - the mem_rtx as QImode and Plus as QImode to fix the error. - -Signed-off-by :Nagaraju Mekala <nmekala@xilix.com> - Ajit Agarwal <ajitkum@xilinx.com> -ChangeLog: - 2016-02-23 Nagaraju Mekala <nmekala@xilix.com> - Ajit Agarwal <ajitkum@xilinx.com> - - *microblaze.c (microblaze_expand_divide): Update ---- - gcc/config/microblaze/microblaze.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/gcc/config/microblaze/microblaze.c b/gcc/config/microblaze/microblaze.c -index 29cd54f..f8a417c 100644 ---- a/gcc/config/microblaze/microblaze.c -+++ b/gcc/config/microblaze/microblaze.c -@@ -3769,7 +3769,7 @@ microblaze_expand_divide (rtx operands[]) - emit_insn (gen_ashlsi3_bshift (regt1, operands[1], GEN_INT(4))); - emit_insn (gen_addsi3 (regt1, regt1, operands[2])); - mem_rtx = gen_rtx_MEM (QImode, -- gen_rtx_PLUS (Pmode, regt1, div_table_rtx)); -+ gen_rtx_PLUS (QImode, regt1, div_table_rtx)); - - insn = emit_insn (gen_zero_extendqisi2(operands[0],mem_rtx)); - jump = emit_jump_insn_after (gen_jump (div_end_label), insn); --- -2.7.4 - diff --git a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0030-patch-microblaze-Fix-the-calculation-of-high-word-in.patch b/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0030-patch-microblaze-Fix-the-calculation-of-high-word-in.patch deleted file mode 100644 index 52fd4bea..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0030-patch-microblaze-Fix-the-calculation-of-high-word-in.patch +++ /dev/null @@ -1,45 +0,0 @@ -From 27a69d1873221747121360d0a1dffc4336a1d0cc Mon Sep 17 00:00:00 2001 -From: Mahesh Bodapati <mbodapat@xilinx.com> -Date: Wed, 18 Jan 2017 12:03:39 +0530 -Subject: [PATCH 30/54] [patch,microblaze]: Fix the calculation of high word in - a long long 6. .4-bit - -This patch will change the calculation of high word in a long long 64-bit. -Earlier to this patch the high word of long long word (0xF0000000ULL) is -coming to be 0xFFFFFFFF and low word is 0xF0000000. Instead the high word -should be 0x00000000 and the low word should be 0xF0000000. This patch -removes the condition of checking high word = 0 & low word < 0. -This check is not required for the correctness of calculating 32-bit high -and low words in a 64-bit long long. - -Signed-off-by :Nagaraju Mekala <nmekala@xilix.com> - Ajit Agarwal <ajitkum@xilinx.com> - -ChangeLog: -2016-03-01 Nagaraju Mekala <nmekala@xilix.com> - Ajit Agarwal <ajitkum@xilinx.com> - - *config/microblaze/microblaze.c (print_operand): Remove the condition of checking - high word = 0 & low word < 0. - *testsuite/gcc.target/microblaze/others/long.c: Add -O0 option. ---- - gcc/config/microblaze/microblaze.c | 3 --- - 1 file changed, 3 deletions(-) - -diff --git a/gcc/config/microblaze/microblaze.c b/gcc/config/microblaze/microblaze.c -index f8a417c..70d8d03 100644 ---- a/gcc/config/microblaze/microblaze.c -+++ b/gcc/config/microblaze/microblaze.c -@@ -2535,9 +2535,6 @@ print_operand (FILE * file, rtx op, int letter) - { - val[0] = (INTVAL (op) & 0xffffffff00000000LL) >> 32; - val[1] = INTVAL (op) & 0x00000000ffffffffLL; -- if (val[0] == 0 && val[1] < 0) -- val[0] = -1; -- - } - fprintf (file, "0x%8.8lx", (letter == 'h') ? val[0] : val[1]); - } --- -2.7.4 - diff --git a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0031-Patch-microblaze-Add-new-bit-field-instructions.patch b/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0031-Patch-microblaze-Add-new-bit-field-instructions.patch deleted file mode 100644 index 57144523..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0031-Patch-microblaze-Add-new-bit-field-instructions.patch +++ /dev/null @@ -1,120 +0,0 @@ -From 35569bb20a5bb881f7f275d901a0be3408b16622 Mon Sep 17 00:00:00 2001 -From: Mahesh Bodapati <mbodapat@xilinx.com> -Date: Wed, 18 Jan 2017 12:14:51 +0530 -Subject: [PATCH 31/54] [Patch, microblaze]: Add new bit-field instructions - This patches adds new bsefi and bsifi instructions. BSEFI- The instruction - shall extract a bit field from a register and place it right-adjusted in the - destination register. The other bits in the destination register shall be set - to zero BSIFI- The instruction shall insert a right-adjusted bit field from a - register at another position in the destination register. The rest of the - bits in the destination register shall be unchanged - -Signed-off-by :Nagaraju Mekala <nmekala@xilix.com> - -ChangeLog: - 2016-02-03 Nagaraju Mekala <nmekala@xilix.com> - - *microblaze.md (Update): Added new patterns ---- - gcc/config/microblaze/microblaze.md | 73 +++++++++++++++++++++++++++++++++++++ - 1 file changed, 73 insertions(+) - -diff --git a/gcc/config/microblaze/microblaze.md b/gcc/config/microblaze/microblaze.md -index 6395533..5a2dd13 100644 ---- a/gcc/config/microblaze/microblaze.md -+++ b/gcc/config/microblaze/microblaze.md -@@ -980,6 +980,8 @@ - (set_attr "mode" "DI") - (set_attr "length" "20,20,20")]) - -+ -+ - ;;---------------------------------------------------------------- - ;; Data movement - ;;---------------------------------------------------------------- -@@ -1774,6 +1776,7 @@ - (set_attr "length" "28")] - ) - -+ - ;;---------------------------------------------------------------- - ;; Setting a register from an integer comparison. - ;;---------------------------------------------------------------- -@@ -2473,4 +2476,74 @@ - DONE; - }") - -+(define_expand "extvsi" -+ [(set (match_operand:SI 0 "register_operand" "r") -+ (zero_extract:SI (match_operand:SI 1 "register_operand" "r") -+ (match_operand:SI 2 "immediate_operand" "I") -+ (match_operand:SI 3 "immediate_operand" "I")))] -+"TARGET_HAS_BITFIELD" -+" -+{ -+ unsigned HOST_WIDE_INT len = UINTVAL (operands[2]); -+ unsigned HOST_WIDE_INT pos = UINTVAL (operands[3]); -+ -+ if ((len == 0) || (pos + len > 32) ) -+ FAIL; -+ -+ ;;if (!register_operand (operands[1], VOIDmode)) -+ ;; FAIL; -+ if (operands[0] == operands[1]) -+ FAIL; -+ if (GET_CODE (operands[1]) == ASHIFT) -+ FAIL; -+;; operands[2] = GEN_INT(INTVAL(operands[2])+1 ); -+ emit_insn (gen_extv_32 (operands[0], operands[1], -+ operands[2], operands[3])); -+ DONE; -+}") -+ -+(define_insn "extv_32" -+ [(set (match_operand:SI 0 "register_operand" "=r") -+ (zero_extract:SI (match_operand:SI 1 "register_operand" "r") -+ (match_operand:SI 2 "immediate_operand" "I") -+ (match_operand:SI 3 "immediate_operand" "I")))] -+ "TARGET_HAS_BITFIELD && (UINTVAL (operands[2]) > 0) -+ && ((UINTVAL (operands[2]) + UINTVAL (operands[3])) <= 32)" -+ "bsefi %0,%1,%2,%3" -+ [(set_attr "type" "bshift") -+ (set_attr "length" "4")]) -+ -+(define_expand "insvsi" -+ [(set (zero_extract:SI (match_operand:SI 0 "register_operand" "+r") -+ (match_operand:SI 1 "immediate_operand" "I") -+ (match_operand:SI 2 "immediate_operand" "I")) -+ (match_operand:SI 3 "register_operand" "r"))] -+ "TARGET_HAS_BITFIELD" -+ " -+{ -+ unsigned HOST_WIDE_INT len = UINTVAL (operands[1]); -+ unsigned HOST_WIDE_INT pos = UINTVAL (operands[2]); -+ -+ if (len <= 0 || pos + len > 32) -+ FAIL; -+ -+ ;;if (!register_operand (operands[0], VOIDmode)) -+ ;; FAIL; -+ -+ emit_insn (gen_insv_32 (operands[0], operands[1], -+ operands[2], operands[3])); -+ DONE; -+}") -+ -+(define_insn "insv_32" -+ [(set (zero_extract:SI (match_operand:SI 0 "register_operand" "+r") -+ (match_operand:SI 1 "immediate_operand" "I") -+ (match_operand:SI 2 "immediate_operand" "I")) -+ (match_operand:SI 3 "register_operand" "r"))] -+ "TARGET_HAS_BITFIELD && UINTVAL (operands[1]) > 0 -+ && UINTVAL (operands[1]) + UINTVAL (operands[2]) <= 32" -+ "bsifi %0, %3, %1, %2" -+ [(set_attr "type" "bshift") -+ (set_attr "length" "4")]) -+ - (include "sync.md") --- -2.7.4 - diff --git a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0032-Patch-microblaze-Fix-bug-in-MB-version-calculation.patch b/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0032-Patch-microblaze-Fix-bug-in-MB-version-calculation.patch deleted file mode 100644 index dce1bc58..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0032-Patch-microblaze-Fix-bug-in-MB-version-calculation.patch +++ /dev/null @@ -1,247 +0,0 @@ -From 3db8f0c3124d3001d3c10e6d400943f3ec57616b Mon Sep 17 00:00:00 2001 -From: Mahesh Bodapati <mbodapat@xilinx.com> -Date: Wed, 18 Jan 2017 12:42:10 +0530 -Subject: [PATCH 32/54] [Patch, microblaze]: Fix bug in MB version calculation - This patch fixes the bug in microblaze_version_to_int function. Earlier the - conversion of vXX.YY.Z to int has a bug which is fixed now. - -Signed-off-by : Mahesh Bodapati <mbodapat@xilinx.com> - Nagaraju Mekala <nmekala@xilix.com> ---- - gcc/config/microblaze/microblaze.c | 147 ++++++++++++++++++------------------- - 1 file changed, 70 insertions(+), 77 deletions(-) - -diff --git a/gcc/config/microblaze/microblaze.c b/gcc/config/microblaze/microblaze.c -index 70d8d03..30a0fcf 100644 ---- a/gcc/config/microblaze/microblaze.c -+++ b/gcc/config/microblaze/microblaze.c -@@ -238,6 +238,63 @@ section *sdata2_section; - #define TARGET_HAVE_TLS true - #endif - -+/* Convert a version number of the form "vX.YY.Z" to an integer encoding -+ for easier range comparison. */ -+static int -+microblaze_version_to_int (const char *version) -+{ -+ const char *p, *v; -+ const char *tmpl = "vXX.YY.Z"; -+ int iver1 =0, iver2 =0, iver3 =0; -+ -+ p = version; -+ v = tmpl; -+ -+ while (*p) -+ { -+ if (*v == 'X') -+ { /* Looking for major */ -+ if (*p == '.') -+ { -+ *v++; -+ } -+ else -+ { -+ if (!(*p >= '0' && *p <= '9')) -+ return -1; -+ iver1 += (int) (*p - '0'); -+ iver1 *= 1000; -+ } -+ } -+ else if (*v == 'Y') -+ { /* Looking for minor */ -+ if (!(*p >= '0' && *p <= '9')) -+ return -1; -+ iver2 += (int) (*p - '0'); -+ iver2 *= 10; -+ } -+ else if (*v == 'Z') -+ { /* Looking for compat */ -+ if (!(*p >= 'a' && *p <= 'z')) -+ return -1; -+ iver3 = ((int) (*p)) - 96; -+ } -+ else -+ { -+ if (*p != *v) -+ return -1; -+ } -+ -+ v++; -+ p++; -+ } -+ -+ if (*p) -+ return -1; -+ -+ return iver1 + iver2 + iver3; -+} -+ - /* Return truth value if a CONST_DOUBLE is ok to be a legitimate constant. */ - static bool - microblaze_const_double_ok (rtx op, machine_mode mode) -@@ -1266,8 +1323,7 @@ microblaze_rtx_costs (rtx x, machine_mode mode, int outer_code ATTRIBUTE_UNUSED, - { - if (TARGET_BARREL_SHIFT) - { -- if (MICROBLAZE_VERSION_COMPARE (microblaze_select_cpu, "v5.00.a") -- >= 0) -+ if (microblaze_version_to_int(microblaze_select_cpu) >= microblaze_version_to_int("v5.00.a")) - *total = COSTS_N_INSNS (1); - else - *total = COSTS_N_INSNS (2); -@@ -1328,8 +1384,7 @@ microblaze_rtx_costs (rtx x, machine_mode mode, int outer_code ATTRIBUTE_UNUSED, - } - else if (!TARGET_SOFT_MUL) - { -- if (MICROBLAZE_VERSION_COMPARE (microblaze_select_cpu, "v5.00.a") -- >= 0) -+ if (microblaze_version_to_int(microblaze_select_cpu) >= microblaze_version_to_int("v5.00.a")) - *total = COSTS_N_INSNS (1); - else - *total = COSTS_N_INSNS (3); -@@ -1609,72 +1664,13 @@ function_arg_partial_bytes (cumulative_args_t cum_v, machine_mode mode, - return 0; - } - --/* Convert a version number of the form "vX.YY.Z" to an integer encoding -- for easier range comparison. */ --static int --microblaze_version_to_int (const char *version) --{ -- const char *p, *v; -- const char *tmpl = "vXX.YY.Z"; -- int iver = 0; -- -- p = version; -- v = tmpl; -- -- while (*p) -- { -- if (*v == 'X') -- { /* Looking for major */ -- if (*p == '.') -- { -- v++; -- } -- else -- { -- if (!(*p >= '0' && *p <= '9')) -- return -1; -- iver += (int) (*p - '0'); -- iver *= 10; -- } -- } -- else if (*v == 'Y') -- { /* Looking for minor */ -- if (!(*p >= '0' && *p <= '9')) -- return -1; -- iver += (int) (*p - '0'); -- iver *= 10; -- } -- else if (*v == 'Z') -- { /* Looking for compat */ -- if (!(*p >= 'a' && *p <= 'z')) -- return -1; -- iver *= 10; -- iver += (int) (*p - 'a'); -- } -- else -- { -- if (*p != *v) -- return -1; -- } -- -- v++; -- p++; -- } -- -- if (*p) -- return -1; -- -- return iver; --} -- -- - static void - microblaze_option_override (void) - { - register int i, start; - register int regno; - register machine_mode mode; -- int ver; -+ int ver,ver_int; - - microblaze_section_threshold = (global_options_set.x_g_switch_value - ? g_switch_value -@@ -1695,13 +1691,13 @@ microblaze_option_override (void) - /* Check the MicroBlaze CPU version for any special action to be done. */ - if (microblaze_select_cpu == NULL) - microblaze_select_cpu = MICROBLAZE_DEFAULT_CPU; -- ver = microblaze_version_to_int (microblaze_select_cpu); -- if (ver == -1) -+ ver_int = microblaze_version_to_int (microblaze_select_cpu); -+ if (ver_int == -1) - { - error ("%qs is an invalid argument to -mcpu=", microblaze_select_cpu); - } - -- ver = MICROBLAZE_VERSION_COMPARE (microblaze_select_cpu, "v3.00.a"); -+ ver = ver_int - microblaze_version_to_int("v3.00.a"); - if (ver < 0) - { - /* No hardware exceptions in earlier versions. So no worries. */ -@@ -1712,8 +1708,7 @@ microblaze_option_override (void) - microblaze_pipe = MICROBLAZE_PIPE_3; - } - else if (ver == 0 -- || (MICROBLAZE_VERSION_COMPARE (microblaze_select_cpu, "v4.00.b") -- == 0)) -+ || (ver_int == microblaze_version_to_int("v4.00.b"))) - { - #if 0 - microblaze_select_flags |= (MICROBLAZE_MASK_NO_UNSAFE_DELAY); -@@ -1730,11 +1725,9 @@ microblaze_option_override (void) - #endif - microblaze_no_unsafe_delay = 0; - microblaze_pipe = MICROBLAZE_PIPE_5; -- if (MICROBLAZE_VERSION_COMPARE (microblaze_select_cpu, "v5.00.a") == 0 -- || MICROBLAZE_VERSION_COMPARE (microblaze_select_cpu, -- "v5.00.b") == 0 -- || MICROBLAZE_VERSION_COMPARE (microblaze_select_cpu, -- "v5.00.c") == 0) -+ if ((ver_int == microblaze_version_to_int("v5.00.a")) -+ || (ver_int == microblaze_version_to_int("v5.00.b")) -+ || (ver_int == microblaze_version_to_int("v5.00.c"))) - { - /* Pattern compares are to be turned on by default only when - compiling for MB v5.00.'z'. */ -@@ -1742,7 +1735,7 @@ microblaze_option_override (void) - } - } - -- ver = MICROBLAZE_VERSION_COMPARE (microblaze_select_cpu, "v6.00.a"); -+ ver = ver_int - microblaze_version_to_int("v6.00.a"); - if (ver < 0) - { - if (TARGET_MULTIPLY_HIGH) -@@ -1750,7 +1743,7 @@ microblaze_option_override (void) - "-mxl-multiply-high can be used only with -mcpu=v6.00.a or greater"); - } - -- ver = MICROBLAZE_VERSION_COMPARE (microblaze_select_cpu, "v8.10.a"); -+ ver = ver_int - microblaze_version_to_int("v8.10.a"); - microblaze_has_clz = 1; - if (ver < 0) - { -@@ -1759,7 +1752,7 @@ microblaze_option_override (void) - } - - /* TARGET_REORDER defaults to 2 if -mxl-reorder not specified. */ -- ver = MICROBLAZE_VERSION_COMPARE (microblaze_select_cpu, "v8.30.a"); -+ ver = ver_int - microblaze_version_to_int("v8.30.a"); - if (ver < 0) - { - if (TARGET_REORDER == 1) --- -2.7.4 - diff --git a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0033-Fixing-the-bug-in-the-bit-field-instruction.patch b/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0033-Fixing-the-bug-in-the-bit-field-instruction.patch deleted file mode 100644 index 15111477..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0033-Fixing-the-bug-in-the-bit-field-instruction.patch +++ /dev/null @@ -1,48 +0,0 @@ -From f3e259923788176ebb323155cc089e68c6de0895 Mon Sep 17 00:00:00 2001 -From: Mahesh Bodapati <mbodapat@xilinx.com> -Date: Wed, 18 Jan 2017 13:57:48 +0530 -Subject: [PATCH 33/54] Fixing the bug in the bit-field instruction. Bit field - instruction should be generated only if mcpu >10.0 - ---- - gcc/config/microblaze/microblaze.c | 3 +++ - gcc/config/microblaze/microblaze.h | 2 ++ - 2 files changed, 5 insertions(+) - -diff --git a/gcc/config/microblaze/microblaze.c b/gcc/config/microblaze/microblaze.c -index 30a0fcf..835e906 100644 ---- a/gcc/config/microblaze/microblaze.c -+++ b/gcc/config/microblaze/microblaze.c -@@ -163,6 +163,9 @@ int microblaze_no_unsafe_delay; - /* Set to one if the targeted core has the CLZ insn. */ - int microblaze_has_clz = 0; - -+/* Set to one if the targeted core has barrel-shift and cpu > 10.0 */ -+int microblaze_has_bitfield = 0; -+ - /* Which CPU pipeline do we use. We haven't really standardized on a CPU - version having only a particular type of pipeline. There can still be - options on the CPU to scale pipeline features up or down. :( -diff --git a/gcc/config/microblaze/microblaze.h b/gcc/config/microblaze/microblaze.h -index 2ac5aeec..991d0f7 100644 ---- a/gcc/config/microblaze/microblaze.h -+++ b/gcc/config/microblaze/microblaze.h -@@ -44,6 +44,7 @@ extern int microblaze_dbx_regno[]; - - extern int microblaze_no_unsafe_delay; - extern int microblaze_has_clz; -+extern int microblaze_has_bitfield; - extern enum pipeline_type microblaze_pipe; - - #define OBJECT_FORMAT_ELF -@@ -62,6 +63,7 @@ extern enum pipeline_type microblaze_pipe; - - /* Do we have CLZ? */ - #define TARGET_HAS_CLZ (TARGET_PATTERN_COMPARE && microblaze_has_clz) -+#define TARGET_HAS_BITFIELD (TARGET_BARREL_SHIFT && microblaze_has_bitfield) - - /* The default is to support PIC. */ - #define TARGET_SUPPORTS_PIC 1 --- -2.7.4 - diff --git a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0034-Patch-microblaze-Macros-used-in-Xilinx-internal-patc.patch b/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0034-Patch-microblaze-Macros-used-in-Xilinx-internal-patc.patch deleted file mode 100644 index f22f2f3f..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0034-Patch-microblaze-Macros-used-in-Xilinx-internal-patc.patch +++ /dev/null @@ -1,32 +0,0 @@ -From 52cf8e91f06ce9259d4d94bb8ea5cb327825b806 Mon Sep 17 00:00:00 2001 -From: Mahesh Bodapati <mbodapat@xilinx.com> -Date: Wed, 18 Jan 2017 20:57:10 +0530 -Subject: [PATCH 34/54] [Patch, microblaze]: Macros used in Xilinx internal - patches has been removed in gcc 6.2 version so modified the code accordingly. - ---- - gcc/config/microblaze/microblaze.c | 8 +++----- - 1 file changed, 3 insertions(+), 5 deletions(-) - -diff --git a/gcc/config/microblaze/microblaze.c b/gcc/config/microblaze/microblaze.c -index 835e906..2e3b4c9 100644 ---- a/gcc/config/microblaze/microblaze.c -+++ b/gcc/config/microblaze/microblaze.c -@@ -2520,11 +2520,9 @@ print_operand (FILE * file, rtx op, int letter) - REAL_VALUE_TO_TARGET_DOUBLE (*CONST_DOUBLE_REAL_VALUE (op), val); - else - { -- REAL_VALUE_TYPE rv; -- REAL_VALUE_FROM_CONST_DOUBLE (rv, op); -- REAL_VALUE_TO_TARGET_DOUBLE (rv, l); -- val[1] = l[WORDS_BIG_ENDIAN == 0]; -- val[0] = l[WORDS_BIG_ENDIAN != 0]; -+ REAL_VALUE_TO_TARGET_DOUBLE (*CONST_DOUBLE_REAL_VALUE (op), l); -+ val[1] = l[WORDS_BIG_ENDIAN == 0]; -+ val[0] = l[WORDS_BIG_ENDIAN != 0]; - } - } - else if (code == CONST_INT) --- -2.7.4 - diff --git a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0035-Fixing-the-issue-with-the-builtin_alloc.patch b/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0035-Fixing-the-issue-with-the-builtin_alloc.patch deleted file mode 100644 index 00d67bcf..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0035-Fixing-the-issue-with-the-builtin_alloc.patch +++ /dev/null @@ -1,44 +0,0 @@ -From 727b0f7ae03279177559f5d85d8920352bd853b2 Mon Sep 17 00:00:00 2001 -From: Nagaraju Mekala <nmekala@xilix.com> -Date: Thu, 23 Feb 2017 17:09:04 +0530 -Subject: [PATCH 35/54] Fixing the issue with the builtin_alloc. register r18 - was not properly handling the stack pattern which was resolved by using free - available register - -signed-off-by:nagaraju mekala <nmekala@xilinx.com> ---- - gcc/config/microblaze/microblaze.md | 8 ++++---- - 1 file changed, 4 insertions(+), 4 deletions(-) - -diff --git a/gcc/config/microblaze/microblaze.md b/gcc/config/microblaze/microblaze.md -index 5a2dd13..8072ffc 100644 ---- a/gcc/config/microblaze/microblaze.md -+++ b/gcc/config/microblaze/microblaze.md -@@ -2076,10 +2076,10 @@ - "" - { - rtx retaddr = gen_rtx_MEM (Pmode, stack_pointer_rtx); -- rtx rtmp = gen_rtx_REG (SImode, R_TMP); -+ rtx reg = gen_reg_rtx (Pmode); - rtx neg_op0; - -- emit_move_insn (rtmp, retaddr); -+ emit_move_insn (reg, retaddr); - if (GET_CODE (operands[1]) != CONST_INT) - { - neg_op0 = gen_reg_rtx (Pmode); -@@ -2088,9 +2088,9 @@ - neg_op0 = GEN_INT (- INTVAL (operands[1])); - - emit_insn (gen_addsi3 (stack_pointer_rtx, stack_pointer_rtx, neg_op0)); -- emit_move_insn (gen_rtx_MEM (Pmode, stack_pointer_rtx), rtmp); -+ emit_move_insn (gen_rtx_MEM (Pmode, stack_pointer_rtx), reg); - emit_move_insn (operands[0], virtual_stack_dynamic_rtx); -- emit_insn (gen_rtx_CLOBBER (SImode, rtmp)); -+ emit_insn (gen_rtx_CLOBBER (SImode, reg)); - DONE; - } - ) --- -2.7.4 - diff --git a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0036-Patch-Microblaze-reverting-the-cost-check-before-pro.patch b/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0036-Patch-Microblaze-reverting-the-cost-check-before-pro.patch deleted file mode 100644 index 54ccd9a0..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0036-Patch-Microblaze-reverting-the-cost-check-before-pro.patch +++ /dev/null @@ -1,49 +0,0 @@ -From 7156e379a67fa47a5fb9ede1448c0d528dbda65b Mon Sep 17 00:00:00 2001 -From: Mahesh Bodapati <mbodapat@xilinx.com> -Date: Thu, 2 Mar 2017 19:02:31 +0530 -Subject: [PATCH 36/54] [Patch,Microblaze]:reverting the cost check before - propagating constants. - ---- - gcc/cprop.c | 4 ++++ - 1 file changed, 4 insertions(+) - -diff --git a/gcc/cprop.c b/gcc/cprop.c -index e4df509..deb706b 100644 ---- a/gcc/cprop.c -+++ b/gcc/cprop.c -@@ -733,6 +733,7 @@ try_replace_reg (rtx from, rtx to, rtx_insn *insn) - int success = 0; - rtx set = single_set (insn); - -+#if 0 - bool check_rtx_costs = true; - bool speed = optimize_bb_for_speed_p (BLOCK_FOR_INSN (insn)); - int old_cost = set ? set_rtx_cost (set, speed) : 0; -@@ -744,6 +745,7 @@ try_replace_reg (rtx from, rtx to, rtx_insn *insn) - && (GET_CODE (XEXP (note, 0)) == CONST - || CONSTANT_P (XEXP (note, 0))))) - check_rtx_costs = false; -+#endif - - /* Usually we substitute easy stuff, so we won't copy everything. - We however need to take care to not duplicate non-trivial CONST -@@ -752,6 +754,7 @@ try_replace_reg (rtx from, rtx to, rtx_insn *insn) - - validate_replace_src_group (from, to, insn); - -+#if 0 - /* If TO is a constant, check the cost of the set after propagation - to the cost of the set before the propagation. If the cost is - higher, then do not replace FROM with TO. */ -@@ -764,6 +767,7 @@ try_replace_reg (rtx from, rtx to, rtx_insn *insn) - return false; - } - -+#endif - - if (num_changes_pending () && apply_change_group ()) - success = 1; --- -2.7.4 - diff --git a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0037-Patch-Microblaze-update-in-constraints-for-bitfield-.patch b/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0037-Patch-Microblaze-update-in-constraints-for-bitfield-.patch deleted file mode 100644 index 26b685a5..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0037-Patch-Microblaze-update-in-constraints-for-bitfield-.patch +++ /dev/null @@ -1,80 +0,0 @@ -From 149cf4619622d27641a2886cd8bf38a49ad88f87 Mon Sep 17 00:00:00 2001 -From: Mahesh Bodapati <mbodapat@xilinx.com> -Date: Mon, 19 Feb 2018 18:06:16 +0530 -Subject: [PATCH 37/54] [Patch,Microblaze]: update in constraints for bitfield - insert and extract instructions. - ---- - gcc/config/microblaze/microblaze.md | 43 ++++++------------------------------- - 1 file changed, 7 insertions(+), 36 deletions(-) - -diff --git a/gcc/config/microblaze/microblaze.md b/gcc/config/microblaze/microblaze.md -index 8072ffc..9bb87ec 100644 ---- a/gcc/config/microblaze/microblaze.md -+++ b/gcc/config/microblaze/microblaze.md -@@ -2476,33 +2476,17 @@ - DONE; - }") - --(define_expand "extvsi" -+(define_expand "extzvsi" - [(set (match_operand:SI 0 "register_operand" "r") - (zero_extract:SI (match_operand:SI 1 "register_operand" "r") - (match_operand:SI 2 "immediate_operand" "I") - (match_operand:SI 3 "immediate_operand" "I")))] - "TARGET_HAS_BITFIELD" --" --{ -- unsigned HOST_WIDE_INT len = UINTVAL (operands[2]); -- unsigned HOST_WIDE_INT pos = UINTVAL (operands[3]); -- -- if ((len == 0) || (pos + len > 32) ) -- FAIL; -- -- ;;if (!register_operand (operands[1], VOIDmode)) -- ;; FAIL; -- if (operands[0] == operands[1]) -- FAIL; -- if (GET_CODE (operands[1]) == ASHIFT) -- FAIL; --;; operands[2] = GEN_INT(INTVAL(operands[2])+1 ); -- emit_insn (gen_extv_32 (operands[0], operands[1], -- operands[2], operands[3])); -- DONE; --}") -+"" -+) - --(define_insn "extv_32" -+ -+(define_insn "extzv_32" - [(set (match_operand:SI 0 "register_operand" "=r") - (zero_extract:SI (match_operand:SI 1 "register_operand" "r") - (match_operand:SI 2 "immediate_operand" "I") -@@ -2519,21 +2503,8 @@ - (match_operand:SI 2 "immediate_operand" "I")) - (match_operand:SI 3 "register_operand" "r"))] - "TARGET_HAS_BITFIELD" -- " --{ -- unsigned HOST_WIDE_INT len = UINTVAL (operands[1]); -- unsigned HOST_WIDE_INT pos = UINTVAL (operands[2]); -- -- if (len <= 0 || pos + len > 32) -- FAIL; -- -- ;;if (!register_operand (operands[0], VOIDmode)) -- ;; FAIL; -- -- emit_insn (gen_insv_32 (operands[0], operands[1], -- operands[2], operands[3])); -- DONE; --}") -+"" -+) - - (define_insn "insv_32" - [(set (zero_extract:SI (match_operand:SI 0 "register_operand" "+r") --- -2.7.4 - diff --git a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0038-Patch-Microblaze-Removed-fsqrt-generation-for-double.patch b/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0038-Patch-Microblaze-Removed-fsqrt-generation-for-double.patch deleted file mode 100644 index d8ae6c15..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0038-Patch-Microblaze-Removed-fsqrt-generation-for-double.patch +++ /dev/null @@ -1,38 +0,0 @@ -From 5494699756f8e1dba6848fcf09780a031139c232 Mon Sep 17 00:00:00 2001 -From: Mahesh Bodapati <mbodapat@xilinx.com> -Date: Mon, 4 Jun 2018 10:10:18 +0530 -Subject: [PATCH 38/54] [Patch,Microblaze] : Removed fsqrt generation for - double values. - ---- - gcc/config/microblaze/microblaze.md | 14 -------------- - 1 file changed, 14 deletions(-) - -diff --git a/gcc/config/microblaze/microblaze.md b/gcc/config/microblaze/microblaze.md -index 9bb87ec..a93ddd0 100644 ---- a/gcc/config/microblaze/microblaze.md -+++ b/gcc/config/microblaze/microblaze.md -@@ -524,20 +524,6 @@ - (set_attr "mode" "SF") - (set_attr "length" "4")]) - --(define_insn "sqrtdf2" -- [(set (match_operand:DF 0 "register_operand" "=d") -- (sqrt:DF (match_operand:DF 1 "register_operand" "dG")))] -- "TARGET_HARD_FLOAT && TARGET_FLOAT_SQRT" -- { -- if (REGNO (operands[0]) == REGNO (operands[1])) -- return "fsqrt\t%0,%1"; -- else -- return "fsqrt\t%0,%1\n\taddk\t%D0,%D1,r0"; -- } -- [(set_attr "type" "fsqrt") -- (set_attr "mode" "SF") -- (set_attr "length" "4")]) -- - (define_insn "fix_truncsfsi2" - [(set (match_operand:SI 0 "register_operand" "=d") - (fix:SI (match_operand:SF 1 "register_operand" "d")))] --- -2.7.4 - diff --git a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0039-Intial-commit-of-64-bit-Microblaze.patch b/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0039-Intial-commit-of-64-bit-Microblaze.patch deleted file mode 100644 index 88497a8e..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0039-Intial-commit-of-64-bit-Microblaze.patch +++ /dev/null @@ -1,810 +0,0 @@ -From 6e8b37bf54646c38fb4071d542a60ea92715df9b Mon Sep 17 00:00:00 2001 -From: Nagaraju Mekala <nmekala@xilix.com> -Date: Tue, 3 Apr 2018 16:48:39 +0530 -Subject: [PATCH 39/54] Intial commit of 64-bit Microblaze - ---- - gcc/config/microblaze/microblaze-protos.h | 1 + - gcc/config/microblaze/microblaze.c | 109 +++++++-- - gcc/config/microblaze/microblaze.h | 4 +- - gcc/config/microblaze/microblaze.md | 370 +++++++++++++++++++++++++++++- - gcc/config/microblaze/microblaze.opt | 9 +- - gcc/config/microblaze/t-microblaze | 7 +- - 6 files changed, 461 insertions(+), 39 deletions(-) - -diff --git a/gcc/config/microblaze/microblaze-protos.h b/gcc/config/microblaze/microblaze-protos.h -index c39e2e9..a5ed62e 100644 ---- a/gcc/config/microblaze/microblaze-protos.h -+++ b/gcc/config/microblaze/microblaze-protos.h -@@ -35,6 +35,7 @@ extern void microblaze_expand_divide (rtx *); - extern void microblaze_expand_conditional_branch (enum machine_mode, rtx *); - extern void microblaze_expand_conditional_branch_reg (machine_mode, rtx *); - extern void microblaze_expand_conditional_branch_sf (rtx *); -+extern void microblaze_expand_conditional_branch_df (rtx *); - extern int microblaze_can_use_return_insn (void); - extern void print_operand (FILE *, rtx, int); - extern void print_operand_address (FILE *, rtx); -diff --git a/gcc/config/microblaze/microblaze.c b/gcc/config/microblaze/microblaze.c -index 2e3b4c9..2079ae9 100644 ---- a/gcc/config/microblaze/microblaze.c -+++ b/gcc/config/microblaze/microblaze.c -@@ -3457,11 +3457,11 @@ microblaze_expand_move (machine_mode mode, rtx operands[]) - op0 = operands[0]; - op1 = operands[1]; - -- if (!register_operand (op0, SImode) -- && !register_operand (op1, SImode) -+ if (!register_operand (op0, mode) -+ && !register_operand (op1, mode) - && (GET_CODE (op1) != CONST_INT || INTVAL (op1) != 0)) - { -- rtx temp = force_reg (SImode, op1); -+ rtx temp = force_reg (mode, op1); - emit_move_insn (op0, temp); - return true; - } -@@ -3499,12 +3499,12 @@ microblaze_expand_move (machine_mode mode, rtx operands[]) - && (flag_pic == 2 || microblaze_tls_symbol_p (p0) - || !SMALL_INT (p1))))) - { -- rtx temp = force_reg (SImode, p0); -+ rtx temp = force_reg (mode, p0); - rtx temp2 = p1; - - if (flag_pic && reload_in_progress) - df_set_regs_ever_live (PIC_OFFSET_TABLE_REGNUM, true); -- emit_move_insn (op0, gen_rtx_PLUS (SImode, temp, temp2)); -+ emit_move_insn (op0, gen_rtx_PLUS (mode, temp, temp2)); - return true; - } - } -@@ -3635,7 +3635,7 @@ microblaze_expand_conditional_branch (machine_mode mode, rtx operands[]) - rtx cmp_op0 = operands[1]; - rtx cmp_op1 = operands[2]; - rtx label1 = operands[3]; -- rtx comp_reg = gen_reg_rtx (SImode); -+ rtx comp_reg = gen_reg_rtx (mode); - rtx condition; - - gcc_assert ((GET_CODE (cmp_op0) == REG) || (GET_CODE (cmp_op0) == SUBREG)); -@@ -3644,23 +3644,36 @@ microblaze_expand_conditional_branch (machine_mode mode, rtx operands[]) - if (cmp_op1 == const0_rtx) - { - comp_reg = cmp_op0; -- condition = gen_rtx_fmt_ee (signed_condition (code), SImode, comp_reg, const0_rtx); -- emit_jump_insn (gen_condjump (condition, label1)); -+ condition = gen_rtx_fmt_ee (signed_condition (code), mode, comp_reg, const0_rtx); -+ if (mode == SImode) -+ emit_jump_insn (gen_condjump (condition, label1)); -+ else -+ emit_jump_insn (gen_long_condjump (condition, label1)); -+ - } - - else if (code == EQ || code == NE) - { - /* Use xor for equal/not-equal comparison. */ -- emit_insn (gen_xorsi3 (comp_reg, cmp_op0, cmp_op1)); -- condition = gen_rtx_fmt_ee (signed_condition (code), SImode, comp_reg, const0_rtx); -- emit_jump_insn (gen_condjump (condition, label1)); -+ if (mode == SImode) -+ emit_insn (gen_xorsi3 (comp_reg, cmp_op0, cmp_op1)); -+ else -+ emit_insn (gen_xordi3 (comp_reg, cmp_op0, cmp_op1)); -+ condition = gen_rtx_fmt_ee (signed_condition (code), mode, comp_reg, const0_rtx); -+ if (mode == SImode) -+ emit_jump_insn (gen_condjump (condition, label1)); -+ else -+ emit_jump_insn (gen_long_condjump (condition, label1)); - } - else - { - /* Generate compare and branch in single instruction. */ - cmp_op1 = force_reg (mode, cmp_op1); - condition = gen_rtx_fmt_ee (code, mode, cmp_op0, cmp_op1); -- emit_jump_insn (gen_branch_compare(condition, cmp_op0, cmp_op1, label1)); -+ if (mode == SImode) -+ emit_jump_insn (gen_branch_compare(condition, cmp_op0, cmp_op1, label1)); -+ else -+ emit_jump_insn (gen_long_branch_compare(condition, cmp_op0, cmp_op1, label1)); - } - } - -@@ -3671,7 +3684,7 @@ microblaze_expand_conditional_branch_reg (machine_mode mode, rtx operands[]) - rtx cmp_op0 = operands[1]; - rtx cmp_op1 = operands[2]; - rtx label1 = operands[3]; -- rtx comp_reg = gen_reg_rtx (SImode); -+ rtx comp_reg = gen_reg_rtx (mode); - rtx condition; - - gcc_assert ((GET_CODE (cmp_op0) == REG) -@@ -3682,30 +3695,63 @@ microblaze_expand_conditional_branch_reg (machine_mode mode, rtx operands[]) - { - comp_reg = cmp_op0; - condition = gen_rtx_fmt_ee (signed_condition (code), -- SImode, comp_reg, const0_rtx); -- emit_jump_insn (gen_condjump (condition, label1)); -+ mode, comp_reg, const0_rtx); -+ if (mode == SImode) -+ emit_jump_insn (gen_condjump (condition, label1)); -+ else -+ emit_jump_insn (gen_long_condjump (condition, label1)); - } - else if (code == EQ) - { -- emit_insn (gen_seq_internal_pat (comp_reg, -- cmp_op0, cmp_op1)); -- condition = gen_rtx_EQ (SImode, comp_reg, const0_rtx); -- emit_jump_insn (gen_condjump (condition, label1)); -+ if (mode == SImode) -+ { -+ emit_insn (gen_seq_internal_pat (comp_reg, cmp_op0, -+ cmp_op1)); -+ } -+ else -+ { -+ emit_insn (gen_seq_internal_pat (comp_reg, cmp_op0, -+ cmp_op1)); -+ } -+ condition = gen_rtx_EQ (mode, comp_reg, const0_rtx); -+ if (mode == SImode) -+ emit_jump_insn (gen_condjump (condition, label1)); -+ else -+ emit_jump_insn (gen_long_condjump (condition, label1)); -+ - } - else if (code == NE) - { -- emit_insn (gen_sne_internal_pat (comp_reg, cmp_op0, -- cmp_op1)); -- condition = gen_rtx_NE (SImode, comp_reg, const0_rtx); -- emit_jump_insn (gen_condjump (condition, label1)); -+ if (mode == SImode) -+ { -+ emit_insn (gen_sne_internal_pat (comp_reg, cmp_op0, -+ cmp_op1)); -+ } -+ else -+ { -+ emit_insn (gen_sne_internal_pat (comp_reg, cmp_op0, -+ cmp_op1)); -+ } -+ condition = gen_rtx_NE (mode, comp_reg, const0_rtx); -+ if (mode == SImode) -+ emit_jump_insn (gen_condjump (condition, label1)); -+ else -+ emit_jump_insn (gen_long_condjump (condition, label1)); - } - else - { - /* Generate compare and branch in single instruction. */ - cmp_op1 = force_reg (mode, cmp_op1); - condition = gen_rtx_fmt_ee (code, mode, cmp_op0, cmp_op1); -- emit_jump_insn (gen_branch_compare (condition, cmp_op0, -- cmp_op1, label1)); -+ if (mode == SImode) -+ emit_jump_insn (gen_branch_compare (condition, cmp_op0, -+ cmp_op1, label1)); -+ else -+ { -+ emit_jump_insn (gen_long_branch_compare (condition, cmp_op0, -+ cmp_op1, label1)); -+ } -+ - } - } - -@@ -3722,6 +3768,19 @@ microblaze_expand_conditional_branch_sf (rtx operands[]) - emit_jump_insn (gen_condjump (condition, operands[3])); - } - -+void -+microblaze_expand_conditional_branch_df (rtx operands[]) -+{ -+ rtx condition; -+ rtx cmp_op0 = XEXP (operands[0], 0); -+ rtx cmp_op1 = XEXP (operands[0], 1); -+ rtx comp_reg = gen_reg_rtx (DImode); -+ -+ emit_insn (gen_cstoredf4 (comp_reg, operands[0], cmp_op0, cmp_op1)); -+ condition = gen_rtx_NE (DImode, comp_reg, const0_rtx); -+ emit_jump_insn (gen_long_condjump (condition, operands[3])); -+} -+ - /* Implement TARGET_FRAME_POINTER_REQUIRED. */ - - static bool -diff --git a/gcc/config/microblaze/microblaze.h b/gcc/config/microblaze/microblaze.h -index 991d0f7..72fbee5 100644 ---- a/gcc/config/microblaze/microblaze.h -+++ b/gcc/config/microblaze/microblaze.h -@@ -102,6 +102,7 @@ extern enum pipeline_type microblaze_pipe; - #define ASM_SPEC "\ - %(target_asm_spec) \ - %{mbig-endian:-EB} \ -+%{m64:-m64} \ - %{mlittle-endian:-EL}" - - /* Extra switches sometimes passed to the linker. */ -@@ -110,6 +111,7 @@ extern enum pipeline_type microblaze_pipe; - #define LINK_SPEC "%{shared:-shared} -N -relax \ - %{mbig-endian:-EB --oformat=elf32-microblaze} \ - %{mlittle-endian:-EL --oformat=elf32-microblazeel} \ -+ %{m64:-EL --oformat=elf64-microblazeel} \ - %{Zxl-mode-xmdstub:-defsym _TEXT_START_ADDR=0x800} \ - %{mxl-mode-xmdstub:-defsym _TEXT_START_ADDR=0x800} \ - %{mxl-gp-opt:%{G*}} %{!mxl-gp-opt: -G 0} \ -@@ -217,7 +219,7 @@ extern enum pipeline_type microblaze_pipe; - #define MIN_UNITS_PER_WORD 4 - #define INT_TYPE_SIZE 32 - #define SHORT_TYPE_SIZE 16 --#define LONG_TYPE_SIZE 32 -+#define LONG_TYPE_SIZE 64 - #define LONG_LONG_TYPE_SIZE 64 - #define FLOAT_TYPE_SIZE 32 - #define DOUBLE_TYPE_SIZE 64 -diff --git a/gcc/config/microblaze/microblaze.md b/gcc/config/microblaze/microblaze.md -index a93ddd0..6976b37 100644 ---- a/gcc/config/microblaze/microblaze.md -+++ b/gcc/config/microblaze/microblaze.md -@@ -495,7 +495,6 @@ - (set_attr "mode" "SF") - (set_attr "length" "4")]) - -- - (define_insn "divsf3" - [(set (match_operand:SF 0 "register_operand" "=d") - (div:SF (match_operand:SF 1 "register_operand" "d") -@@ -506,6 +505,7 @@ - (set_attr "mode" "SF") - (set_attr "length" "4")]) - -+ - (define_insn "sqrtsf2" - [(set (match_operand:SF 0 "register_operand" "=d") - (sqrt:SF (match_operand:SF 1 "register_operand" "d")))] -@@ -560,6 +560,18 @@ - - ;; Adding 2 DI operands in register or reg/imm - -+(define_insn "adddi3_long" -+ [(set (match_operand:DI 0 "register_operand" "=d,d") -+ (plus:DI (match_operand:DI 1 "reg_or_0_operand" "%dJ,dJ") -+ (match_operand:DI 2 "arith_plus_operand" "d,K")))] -+ "TARGET_MB_64" -+ "@ -+ addlk\t%0,%z1,%2 -+ addlik\t%0,%z1,%2" -+ [(set_attr "type" "arith,arith") -+ (set_attr "mode" "DI,DI") -+ (set_attr "length" "4,4")]) -+ - (define_insn "adddi3" - [(set (match_operand:DI 0 "register_operand" "=d,d") - (plus:DI (match_operand:DI 1 "register_operand" "%d,d") -@@ -604,6 +616,18 @@ - ;; Double Precision Subtraction - ;;---------------------------------------------------------------- - -+(define_insn "subdi3_long" -+ [(set (match_operand:DI 0 "register_operand" "=d,d") -+ (minus:DI (match_operand:DI 1 "register_operand" "d,d") -+ (match_operand:DI 2 "register_operand" "d,n")))] -+ "TARGET_MB_64" -+ "@ -+ rsubl\t%0,%2,%1 -+ addlik\t%0,%z1,-%2" -+ [(set_attr "type" "darith") -+ (set_attr "mode" "DI,DI") -+ (set_attr "length" "4,4")]) -+ - (define_insn "subdi3" - [(set (match_operand:DI 0 "register_operand" "=&d") - (minus:DI (match_operand:DI 1 "register_operand" "d") -@@ -793,6 +817,15 @@ - (set_attr "mode" "SI") - (set_attr "length" "4")]) - -+(define_insn "negdi2_long" -+ [(set (match_operand:DI 0 "register_operand" "=d") -+ (neg:DI (match_operand:DI 1 "register_operand" "d")))] -+ "TARGET_MB_64" -+ "rsubl\t%0,%1,r0" -+ [(set_attr "type" "darith") -+ (set_attr "mode" "DI") -+ (set_attr "length" "4")]) -+ - (define_insn "negdi2" - [(set (match_operand:DI 0 "register_operand" "=d") - (neg:DI (match_operand:DI 1 "register_operand" "d")))] -@@ -812,6 +845,15 @@ - (set_attr "mode" "SI") - (set_attr "length" "4")]) - -+(define_insn "one_cmpldi2_long" -+ [(set (match_operand:DI 0 "register_operand" "=d") -+ (not:DI (match_operand:DI 1 "register_operand" "d")))] -+ "TARGET_MB_64" -+ "xorli\t%0,%1,-1" -+ [(set_attr "type" "arith") -+ (set_attr "mode" "DI") -+ (set_attr "length" "4")]) -+ - (define_insn "*one_cmpldi2" - [(set (match_operand:DI 0 "register_operand" "=d") - (not:DI (match_operand:DI 1 "register_operand" "d")))] -@@ -838,6 +880,20 @@ - ;; Logical - ;;---------------------------------------------------------------- - -+(define_insn "anddi3" -+ [(set (match_operand:DI 0 "register_operand" "=d,d") -+ (and:DI (match_operand:DI 1 "arith_operand" "d,d") -+ (match_operand:DI 2 "arith_operand" "d,K")))] -+ "TARGET_MB_64" -+ "@ -+ andl\t%0,%1,%2 -+ andli\t%0,%1,%2 #andl1" -+ ;; andli\t%0,%1,%2 #andl3 -+ ;; andli\t%0,%1,%2 #andl2 -+ [(set_attr "type" "arith,arith") -+ (set_attr "mode" "DI,DI") -+ (set_attr "length" "4,4")]) -+ - (define_insn "andsi3" - [(set (match_operand:SI 0 "register_operand" "=d,d,d,d") - (and:SI (match_operand:SI 1 "arith_operand" "%d,d,d,d") -@@ -853,6 +909,18 @@ - (set_attr "length" "4,8,8,8")]) - - -+(define_insn "iordi3" -+ [(set (match_operand:DI 0 "register_operand" "=d,d") -+ (ior:DI (match_operand:DI 1 "arith_operand" "d,d") -+ (match_operand:DI 2 "arith_operand" "d,K")))] -+ "TARGET_MB_64" -+ "@ -+ orl\t%0,%1,%2 -+ orli\t%0,%1,%2 #andl1" -+ [(set_attr "type" "arith,arith") -+ (set_attr "mode" "DI,DI") -+ (set_attr "length" "4,4")]) -+ - (define_insn "iorsi3" - [(set (match_operand:SI 0 "register_operand" "=d,d,d,d") - (ior:SI (match_operand:SI 1 "arith_operand" "%d,d,d,d") -@@ -867,6 +935,19 @@ - (set_attr "mode" "SI,SI,SI,SI") - (set_attr "length" "4,8,8,8")]) - -+(define_insn "xordi3" -+ [(set (match_operand:DI 0 "register_operand" "=d,d") -+ (xor:DI (match_operand:DI 1 "arith_operand" "%d,d") -+ (match_operand:DI 2 "arith_operand" "d,K")))] -+ "TARGET_MB_64" -+ "@ -+ xorl\t%0,%1,%2 -+ xorli\t%0,%1,%2 #andl1" -+ [(set_attr "type" "arith,arith") -+ (set_attr "mode" "DI,DI") -+ (set_attr "length" "4,4")]) -+ -+ - (define_insn "xorsi3" - [(set (match_operand:SI 0 "register_operand" "=d,d,d") - (xor:SI (match_operand:SI 1 "arith_operand" "%d,d,d") -@@ -935,6 +1016,26 @@ - (set_attr "mode" "SI") - (set_attr "length" "4")]) - -+;;(define_expand "extendqidi2" -+;; [(set (match_operand:DI 0 "register_operand" "=d") -+;; (sign_extend:DI (match_operand:QI 1 "general_operand" "d")))] -+;; "TARGET_MB_64" -+;; { -+;; if (GET_CODE (operands[1]) != REG) -+;; FAIL; -+;; } -+;;) -+ -+ -+;;(define_insn "extendqidi2" -+;; [(set (match_operand:DI 0 "register_operand" "=d") -+;; (sign_extend:DI (match_operand:QI 1 "register_operand" "d")))] -+;; "TARGET_MB_64" -+;; "sextl8\t%0,%1" -+;; [(set_attr "type" "arith") -+;; (set_attr "mode" "DI") -+;; (set_attr "length" "4")]) -+ - (define_insn "extendhisi2" - [(set (match_operand:SI 0 "register_operand" "=d") - (sign_extend:SI (match_operand:HI 1 "register_operand" "d")))] -@@ -944,6 +1045,16 @@ - (set_attr "mode" "SI") - (set_attr "length" "4")]) - -+(define_insn "extendhidi2" -+ [(set (match_operand:DI 0 "register_operand" "=d") -+ (sign_extend:DI (match_operand:HI 1 "register_operand" "d")))] -+ "TARGET_MB_64" -+ "sextl16\t%0,%1" -+ [(set_attr "type" "arith") -+ (set_attr "mode" "DI") -+ (set_attr "length" "4")]) -+ -+ - ;; Those for integer source operand are ordered - ;; widest source type first. - -@@ -1009,7 +1120,6 @@ - ) - - -- - (define_insn "*movdi_internal" - [(set (match_operand:DI 0 "nonimmediate_operand" "=d,d,d,d,d,R,o") - (match_operand:DI 1 "general_operand" " d,i,J,R,o,d,d"))] -@@ -1421,6 +1531,36 @@ - (set_attr "length" "4,4")] - ) - -+;; Barrel shift left -+(define_expand "ashldi3" -+ [(set (match_operand:DI 0 "register_operand" "=&d") -+ (ashift:DI (match_operand:DI 1 "register_operand" "d") -+ (match_operand:DI 2 "arith_operand" "")))] -+"TARGET_MB_64" -+{ -+;;if (CONST_INT_P (operands[2]) && INTVAL (operands[2]) > 0 && INTVAL (operands[2]) < 65) -+if (INTVAL (operands[2]) > 0 && INTVAL (operands[2]) < 65) -+ { -+ emit_insn(gen_ashldi3_long (operands[0], operands[1],operands[2])); -+ DONE; -+ } -+else -+ FAIL; -+} -+) -+ -+(define_insn "ashldi3_long" -+ [(set (match_operand:DI 0 "register_operand" "=d,d") -+ (ashift:DI (match_operand:DI 1 "register_operand" "d,d") -+ (match_operand:DI 2 "arith_operand" "I,d")))] -+ "TARGET_MB_64" -+ "@ -+ bsllli\t%0,%1,%2 -+ bslll\t%0,%1,%2" -+ [(set_attr "type" "bshift,bshift") -+ (set_attr "mode" "DI,DI") -+ (set_attr "length" "4,4")] -+) - ;; The following patterns apply when there is no barrel shifter present - - (define_insn "*ashlsi3_with_mul_delay" -@@ -1546,6 +1686,36 @@ - ;;---------------------------------------------------------------- - ;; 32-bit right shifts - ;;---------------------------------------------------------------- -+;; Barrel shift left -+(define_expand "ashrdi3" -+ [(set (match_operand:DI 0 "register_operand" "=&d") -+ (ashiftrt:DI (match_operand:DI 1 "register_operand" "d") -+ (match_operand:DI 2 "arith_operand" "")))] -+"TARGET_MB_64" -+{ -+;;if (CONST_INT_P (operands[2]) && INTVAL (operands[2]) > 0 && INTVAL (operands[2]) < 65) -+if (INTVAL (operands[2]) > 0 && INTVAL (operands[2]) < 65) -+ { -+ emit_insn(gen_ashrdi3_long (operands[0], operands[1],operands[2])); -+ DONE; -+ } -+else -+ FAIL; -+} -+) -+ -+(define_insn "ashrdi3_long" -+ [(set (match_operand:DI 0 "register_operand" "=d,d") -+ (ashiftrt:DI (match_operand:DI 1 "register_operand" "d,d") -+ (match_operand:DI 2 "arith_operand" "I,d")))] -+ "TARGET_MB_64" -+ "@ -+ bslrai\t%0,%1,%2 -+ bslra\t%0,%1,%2" -+ [(set_attr "type" "bshift,bshift") -+ (set_attr "mode" "DI,DI") -+ (set_attr "length" "4,4")] -+ ) - (define_expand "ashrsi3" - [(set (match_operand:SI 0 "register_operand" "=&d") - (ashiftrt:SI (match_operand:SI 1 "register_operand" "d") -@@ -1655,6 +1825,36 @@ - ;;---------------------------------------------------------------- - ;; 32-bit right shifts (logical) - ;;---------------------------------------------------------------- -+;; Barrel shift left -+(define_expand "lshrdi3" -+ [(set (match_operand:DI 0 "register_operand" "=&d") -+ (lshiftrt:DI (match_operand:DI 1 "register_operand" "d") -+ (match_operand:DI 2 "arith_operand" "")))] -+"TARGET_MB_64" -+{ -+;;if (CONST_INT_P (operands[2]) && INTVAL (operands[2]) > 0 && INTVAL (operands[2]) < 65) -+if (INTVAL (operands[2]) > 0 && INTVAL (operands[2]) < 65) -+ { -+ emit_insn(gen_lshrdi3_long (operands[0], operands[1],operands[2])); -+ DONE; -+ } -+else -+ FAIL; -+} -+) -+ -+(define_insn "lshrdi3_long" -+ [(set (match_operand:DI 0 "register_operand" "=d,d") -+ (lshiftrt:DI (match_operand:DI 1 "register_operand" "d,d") -+ (match_operand:DI 2 "arith_operand" "I,d")))] -+ "TARGET_MB_64" -+ "@ -+ bslrli\t%0,%1,%2 -+ bslrl\t%0,%1,%2" -+ [(set_attr "type" "bshift,bshift") -+ (set_attr "mode" "DI,DI") -+ (set_attr "length" "4,4")] -+ ) - - (define_expand "lshrsi3" - [(set (match_operand:SI 0 "register_operand" "=&d") -@@ -1801,6 +2001,8 @@ - (set_attr "length" "4")] - ) - -+ -+ - ;;---------------------------------------------------------------- - ;; Setting a register from an floating point comparison. - ;;---------------------------------------------------------------- -@@ -1816,6 +2018,18 @@ - (set_attr "length" "4")] - ) - -+(define_insn "cstoredf4" -+ [(set (match_operand:DI 0 "register_operand" "=r") -+ (match_operator:DI 1 "ordered_comparison_operator" -+ [(match_operand:DF 2 "register_operand" "r") -+ (match_operand:DF 3 "register_operand" "r")]))] -+ "TARGET_MB_64" -+ "dcmp.%C1\t%0,%3,%2" -+ [(set_attr "type" "fcmp") -+ (set_attr "mode" "DF") -+ (set_attr "length" "4")] -+) -+ - ;;---------------------------------------------------------------- - ;; Conditional branches - ;;---------------------------------------------------------------- -@@ -1928,6 +2142,115 @@ - (set_attr "length" "12")] - ) - -+ -+(define_expand "cbranchdi4" -+ [(set (pc) -+ (if_then_else (match_operator 0 "ordered_comparison_operator" -+ [(match_operand:DI 1 "register_operand") -+ (match_operand:DI 2 "arith_operand" "I,i")]) -+ (label_ref (match_operand 3 "")) -+ (pc)))] -+ "TARGET_MB_64" -+{ -+ microblaze_expand_conditional_branch (DImode, operands); -+ DONE; -+}) -+ -+(define_expand "cbranchdi4_reg" -+ [(set (pc) -+ (if_then_else (match_operator 0 "ordered_comparison_operator" -+ [(match_operand:DI 1 "register_operand") -+ (match_operand:DI 2 "register_operand")]) -+ (label_ref (match_operand 3 "")) -+ (pc)))] -+ "TARGET_MB_64" -+{ -+ microblaze_expand_conditional_branch_reg (DImode, operands); -+ DONE; -+}) -+ -+(define_expand "cbranchdf4" -+ [(set (pc) -+ (if_then_else (match_operator 0 "ordered_comparison_operator" -+ [(match_operand:DF 1 "register_operand") -+ (match_operand:DF 2 "register_operand")]) -+ (label_ref (match_operand 3 "")) -+ (pc)))] -+ "TARGET_MB_64" -+{ -+ microblaze_expand_conditional_branch_df (operands); -+ DONE; -+ -+}) -+ -+;; Used to implement comparison instructions -+(define_expand "long_condjump" -+ [(set (pc) -+ (if_then_else (match_operand 0) -+ (label_ref (match_operand 1)) -+ (pc)))]) -+ -+(define_insn "long_branch_zero" -+ [(set (pc) -+ (if_then_else (match_operator:DI 0 "ordered_comparison_operator" -+ [(match_operand:DI 1 "register_operand" "d") -+ (const_int 0)]) -+ (match_operand:DI 2 "pc_or_label_operand" "") -+ (match_operand:DI 3 "pc_or_label_operand" ""))) -+ ] -+ "TARGET_MB_64" -+ { -+ if (operands[3] == pc_rtx) -+ return "beal%C0i%?\t%z1,%2"; -+ else -+ return "beal%N0i%?\t%z1,%3"; -+ } -+ [(set_attr "type" "branch") -+ (set_attr "mode" "none") -+ (set_attr "length" "4")] -+) -+ -+(define_insn "long_branch_compare" -+ [(set (pc) -+ (if_then_else (match_operator:DI 0 "cmp_op" -+ [(match_operand:DI 1 "register_operand" "d") -+ (match_operand:DI 2 "register_operand" "d") -+ ]) -+ (label_ref (match_operand 3)) -+ (pc))) -+ (clobber(reg:DI R_TMP))] -+ "TARGET_MB_64" -+ { -+ operands[4] = gen_rtx_REG (DImode, MB_ABI_ASM_TEMP_REGNUM); -+ enum rtx_code code = GET_CODE (operands[0]); -+ -+ if (code == GT || code == LE) -+ { -+ output_asm_insn ("cmpl\tr18,%z1,%z2", operands); -+ code = swap_condition (code); -+ } -+ else if (code == GTU || code == LEU) -+ { -+ output_asm_insn ("cmplu\tr18,%z1,%z2", operands); -+ code = swap_condition (code); -+ } -+ else if (code == GE || code == LT) -+ { -+ output_asm_insn ("cmpl\tr18,%z2,%z1", operands); -+ } -+ else if (code == GEU || code == LTU) -+ { -+ output_asm_insn ("cmplu\tr18,%z2,%z1", operands); -+ } -+ -+ operands[0] = gen_rtx_fmt_ee (signed_condition (code), DImode, operands[4], const0_rtx); -+ return "beal%C0i%?\tr18,%3"; -+ } -+ [(set_attr "type" "branch") -+ (set_attr "mode" "none") -+ (set_attr "length" "12")] -+) -+ - ;;---------------------------------------------------------------- - ;; Unconditional branches - ;;---------------------------------------------------------------- -@@ -2462,17 +2785,33 @@ - DONE; - }") - --(define_expand "extzvsi" -+(define_expand "extvsi" - [(set (match_operand:SI 0 "register_operand" "r") - (zero_extract:SI (match_operand:SI 1 "register_operand" "r") - (match_operand:SI 2 "immediate_operand" "I") - (match_operand:SI 3 "immediate_operand" "I")))] - "TARGET_HAS_BITFIELD" --"" --) -- -+" -+{ -+ unsigned HOST_WIDE_INT len = UINTVAL (operands[2]); -+ unsigned HOST_WIDE_INT pos = UINTVAL (operands[3]); -+ -+ if ((len == 0) || (pos + len > 32) ) -+ FAIL; -+ -+ ;;if (!register_operand (operands[1], VOIDmode)) -+ ;; FAIL; -+ if (operands[0] == operands[1]) -+ FAIL; -+ if (GET_CODE (operands[1]) == ASHIFT) -+ FAIL; -+;; operands[2] = GEN_INT(INTVAL(operands[2])+1 ); -+ emit_insn (gen_extv_32 (operands[0], operands[1], -+ operands[2], operands[3])); -+ DONE; -+}") - --(define_insn "extzv_32" -+(define_insn "extv_32" - [(set (match_operand:SI 0 "register_operand" "=r") - (zero_extract:SI (match_operand:SI 1 "register_operand" "r") - (match_operand:SI 2 "immediate_operand" "I") -@@ -2489,8 +2828,21 @@ - (match_operand:SI 2 "immediate_operand" "I")) - (match_operand:SI 3 "register_operand" "r"))] - "TARGET_HAS_BITFIELD" --"" --) -+ " -+{ -+ unsigned HOST_WIDE_INT len = UINTVAL (operands[1]); -+ unsigned HOST_WIDE_INT pos = UINTVAL (operands[2]); -+ -+ if (len <= 0 || pos + len > 32) -+ FAIL; -+ -+ ;;if (!register_operand (operands[0], VOIDmode)) -+ ;; FAIL; -+ -+ emit_insn (gen_insv_32 (operands[0], operands[1], -+ operands[2], operands[3])); -+ DONE; -+}") - - (define_insn "insv_32" - [(set (zero_extract:SI (match_operand:SI 0 "register_operand" "+r") -diff --git a/gcc/config/microblaze/microblaze.opt b/gcc/config/microblaze/microblaze.opt -index c8e6f00..cdcae00 100644 ---- a/gcc/config/microblaze/microblaze.opt -+++ b/gcc/config/microblaze/microblaze.opt -@@ -125,11 +125,16 @@ Description for mxl-mode-novectors. - - mxl-prefetch - Target Mask(PREFETCH) --Use hardware prefetch instruction -+Use hardware prefetch instruction. - - mxl-mode-xilkernel - Target - - mxl-frequency - Target Mask(AREA_OPTIMIZED_2) --Use 8 stage pipeline (frequency optimization) -+Use 8 stage pipeline (frequency optimization). -+ -+m64 -+Target Mask(MB_64) -+MicroBlaze 64-bit mode. -+ -diff --git a/gcc/config/microblaze/t-microblaze b/gcc/config/microblaze/t-microblaze -index 41fa9a9..e9a1921 100644 ---- a/gcc/config/microblaze/t-microblaze -+++ b/gcc/config/microblaze/t-microblaze -@@ -1,8 +1,11 @@ --MULTILIB_OPTIONS = mxl-barrel-shift mno-xl-soft-mul mxl-multiply-high mlittle-endian --MULTILIB_DIRNAMES = bs m mh le -+MULTILIB_OPTIONS = mxl-barrel-shift mno-xl-soft-mul mxl-multiply-high mlittle-endian m64 -+MULTILIB_DIRNAMES = bs m mh le m64 - MULTILIB_EXCEPTIONS = *mxl-barrel-shift/mxl-multiply-high mxl-multiply-high - MULTILIB_EXCEPTIONS += *mxl-barrel-shift/mxl-multiply-high/mlittle-endian -+MULTILIB_EXCEPTIONS += *mxl-barrel-shift/mxl-multiply-high/m64 - MULTILIB_EXCEPTIONS += mxl-multiply-high/mlittle-endian -+MULTILIB_EXCEPTIONS += mxl-multiply-high/m64 -+MULTILIB_EXCEPTIONS += *mxl-multiply-high/mlittle-endian/m64 - - # Extra files - microblaze-c.o: $(srcdir)/config/microblaze/microblaze-c.c \ --- -2.7.4 - diff --git a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0040-Added-load-store-pattern-movdi-and-also-adding-missi.patch b/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0040-Added-load-store-pattern-movdi-and-also-adding-missi.patch deleted file mode 100644 index 1157a82f..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0040-Added-load-store-pattern-movdi-and-also-adding-missi.patch +++ /dev/null @@ -1,83 +0,0 @@ -From 5526d87787d61990be3187b230fae4d0591d0651 Mon Sep 17 00:00:00 2001 -From: Nagaraju Mekala <nmekala@xilix.com> -Date: Wed, 4 Apr 2018 16:41:41 +0530 -Subject: [PATCH 40/54] Added load store pattern movdi and also adding missing - files - ---- - gcc/config/microblaze/constraints.md | 5 +++++ - gcc/config/microblaze/microblaze.md | 26 ++++++++++++++++++++++++++ - gcc/config/microblaze/t-microblaze | 4 ++-- - 3 files changed, 33 insertions(+), 2 deletions(-) - -diff --git a/gcc/config/microblaze/constraints.md b/gcc/config/microblaze/constraints.md -index ae14944..a06b4d8 100644 ---- a/gcc/config/microblaze/constraints.md -+++ b/gcc/config/microblaze/constraints.md -@@ -52,6 +52,11 @@ - (and (match_code "const_int") - (match_test "ival > 0 && ival < 0x10000"))) - -+(define_constraint "K" -+ "A constant in the range 0xffffff8000000000L to 0x0000007fffffffffL (inclusive)." -+ (and (match_code "const_int") -+ (match_test "ival > (long)0xffffff8000000000L && ival < (long)0x0000007fffffffffL"))) -+ - ;; Define floating point constraints - - (define_constraint "G" -diff --git a/gcc/config/microblaze/microblaze.md b/gcc/config/microblaze/microblaze.md -index 6976b37..0cd0441 100644 ---- a/gcc/config/microblaze/microblaze.md -+++ b/gcc/config/microblaze/microblaze.md -@@ -1120,6 +1120,32 @@ - ) - - -+(define_insn "*movdi_internal_64" -+ [(set (match_operand:DI 0 "nonimmediate_operand" "=d,d,d,d,d,R,o") -+ (match_operand:DI 1 "general_operand" " d,K,J,R,o,d,d"))] -+ "TARGET_MB_64 && (INTVAL(operands[1]) < 0x7fffffffff) && (INTVAL(operands[1]) > 0xffffff8000000000)" -+ { -+ switch (which_alternative) -+ { -+ case 0: -+ return "addlk\t%0,%1"; -+ case 1: -+ return "addlik\t%0,r0,%1"; -+ case 2: -+ return "addlk\t%0,r0,r0"; -+ case 3: -+ case 4: -+ return "lli\t%0,%1"; -+ case 5: -+ case 6: -+ return "sli\t%1,%0"; -+ } -+ return "unreachable"; -+ } -+ [(set_attr "type" "no_delay_move,no_delay_arith,no_delay_arith,no_delay_load,no_delay_load,no_delay_store,no_delay_store") -+ (set_attr "mode" "DI") -+ (set_attr "length" "8,8,8,8,12,8,12")]) -+ - (define_insn "*movdi_internal" - [(set (match_operand:DI 0 "nonimmediate_operand" "=d,d,d,d,d,R,o") - (match_operand:DI 1 "general_operand" " d,i,J,R,o,d,d"))] -diff --git a/gcc/config/microblaze/t-microblaze b/gcc/config/microblaze/t-microblaze -index e9a1921..7671f63 100644 ---- a/gcc/config/microblaze/t-microblaze -+++ b/gcc/config/microblaze/t-microblaze -@@ -4,8 +4,8 @@ MULTILIB_EXCEPTIONS = *mxl-barrel-shift/mxl-multiply-high mxl-multiply-high - MULTILIB_EXCEPTIONS += *mxl-barrel-shift/mxl-multiply-high/mlittle-endian - MULTILIB_EXCEPTIONS += *mxl-barrel-shift/mxl-multiply-high/m64 - MULTILIB_EXCEPTIONS += mxl-multiply-high/mlittle-endian --MULTILIB_EXCEPTIONS += mxl-multiply-high/m64 --MULTILIB_EXCEPTIONS += *mxl-multiply-high/mlittle-endian/m64 -+#MULTILIB_EXCEPTIONS += mxl-multiply-high/m64 -+#MULTILIB_EXCEPTIONS += *mxl-multiply-high/mlittle-endian/m64 - - # Extra files - microblaze-c.o: $(srcdir)/config/microblaze/microblaze-c.c \ --- -2.7.4 - diff --git a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0041-Intial-commit-for-64bit-MB-sources.patch b/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0041-Intial-commit-for-64bit-MB-sources.patch deleted file mode 100644 index 411958e7..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0041-Intial-commit-for-64bit-MB-sources.patch +++ /dev/null @@ -1,2463 +0,0 @@ -From eee9b7f7423823b133d6a5e5382863502433bdc6 Mon Sep 17 00:00:00 2001 -From: Nagaraju Mekala <nmekala@xilix.com> -Date: Fri, 27 Jul 2018 15:23:41 +0530 -Subject: [PATCH 41/54] Intial commit for 64bit-MB sources. Need to cleanup the - code later. - ---- - gcc/config/microblaze/constraints.md | 2 +- - gcc/config/microblaze/microblaze-c.c | 6 + - gcc/config/microblaze/microblaze.c | 218 ++++++++---- - gcc/config/microblaze/microblaze.h | 63 ++-- - gcc/config/microblaze/microblaze.md | 606 ++++++++++++++++++++++++-------- - gcc/config/microblaze/t-microblaze | 7 +- - libgcc/config/microblaze/crti.S | 4 +- - libgcc/config/microblaze/crtn.S | 4 +- - libgcc/config/microblaze/divdi3.S | 98 ++++++ - libgcc/config/microblaze/divdi3_table.c | 62 ++++ - libgcc/config/microblaze/moddi3.S | 97 +++++ - libgcc/config/microblaze/muldi3.S | 73 ++++ - libgcc/config/microblaze/t-microblaze | 11 +- - libgcc/config/microblaze/udivdi3.S | 107 ++++++ - libgcc/config/microblaze/umoddi3.S | 110 ++++++ - 15 files changed, 1232 insertions(+), 236 deletions(-) - create mode 100644 libgcc/config/microblaze/divdi3.S - create mode 100644 libgcc/config/microblaze/divdi3_table.c - create mode 100644 libgcc/config/microblaze/moddi3.S - create mode 100644 libgcc/config/microblaze/muldi3.S - create mode 100644 libgcc/config/microblaze/udivdi3.S - create mode 100644 libgcc/config/microblaze/umoddi3.S - -diff --git a/gcc/config/microblaze/constraints.md b/gcc/config/microblaze/constraints.md -index a06b4d8..867a7b5 100644 ---- a/gcc/config/microblaze/constraints.md -+++ b/gcc/config/microblaze/constraints.md -@@ -55,7 +55,7 @@ - (define_constraint "K" - "A constant in the range 0xffffff8000000000L to 0x0000007fffffffffL (inclusive)." - (and (match_code "const_int") -- (match_test "ival > (long)0xffffff8000000000L && ival < (long)0x0000007fffffffffL"))) -+ (match_test "ival > (long)-549755813888 && ival < (long)549755813887"))) - - ;; Define floating point constraints - -diff --git a/gcc/config/microblaze/microblaze-c.c b/gcc/config/microblaze/microblaze-c.c -index 7b020b5..d8a1d13 100644 ---- a/gcc/config/microblaze/microblaze-c.c -+++ b/gcc/config/microblaze/microblaze-c.c -@@ -100,4 +100,10 @@ microblaze_cpp_define (cpp_reader *pfile) - builtin_define ("HAVE_HW_FPU_SQRT"); - builtin_define ("__HAVE_HW_FPU_SQRT__"); - } -+ if (TARGET_MB_64) -+ { -+ builtin_define ("__arch64__"); -+ builtin_define ("__microblaze64__"); -+ builtin_define ("__MICROBLAZE64__"); -+ } - } -diff --git a/gcc/config/microblaze/microblaze.c b/gcc/config/microblaze/microblaze.c -index 2079ae9..ba7ade4 100644 ---- a/gcc/config/microblaze/microblaze.c -+++ b/gcc/config/microblaze/microblaze.c -@@ -382,10 +382,10 @@ simple_memory_operand (rtx op, machine_mode mode ATTRIBUTE_UNUSED) - { - return 1; - } -- else if (GET_CODE (plus0) == REG && GET_CODE (plus1) == REG) -+ /*else if (GET_CODE (plus0) == REG && GET_CODE (plus1) == REG) - { - return 1; -- } -+ }*/ - else - return 0; - -@@ -433,7 +433,7 @@ double_memory_operand (rtx op, machine_mode mode) - return 1; - - return memory_address_p ((GET_MODE_CLASS (mode) == MODE_INT -- ? E_SImode : E_SFmode), -+ ? Pmode : E_SFmode), - plus_constant (Pmode, addr, 4)); - } - -@@ -680,7 +680,7 @@ microblaze_legitimize_tls_address(rtx x, rtx reg) - /* Load the addend. */ - addend = gen_rtx_UNSPEC (Pmode, gen_rtvec (2, x, GEN_INT (TLS_DTPREL)), - UNSPEC_TLS); -- addend = force_reg (SImode, gen_rtx_CONST (SImode, addend)); -+ addend = force_reg (Pmode, gen_rtx_CONST (Pmode, addend)); - dest = gen_rtx_PLUS (Pmode, dest, addend); - break; - -@@ -698,7 +698,7 @@ microblaze_classify_unspec (struct microblaze_address_info *info, rtx x) - - if (XINT (x, 1) == UNSPEC_GOTOFF) - { -- info->regA = gen_rtx_REG (SImode, PIC_OFFSET_TABLE_REGNUM); -+ info->regA = gen_rtx_REG (Pmode, PIC_OFFSET_TABLE_REGNUM); - info->type = ADDRESS_GOTOFF; - } - else if (XINT (x, 1) == UNSPEC_PLT) -@@ -1230,8 +1230,16 @@ microblaze_block_move_loop (rtx dest, rtx src, HOST_WIDE_INT length) - emit_move_insn (dest_reg, plus_constant (Pmode, dest_reg, MAX_MOVE_BYTES)); - - /* Emit the test & branch. */ -- emit_insn (gen_cbranchsi4 (gen_rtx_NE (SImode, src_reg, final_src), -+ -+ if (TARGET_MB_64) { -+ emit_insn (gen_cbranchdi4 (gen_rtx_NE (Pmode, src_reg, final_src), -+ src_reg, final_src, label)); -+ } -+ else { -+ emit_insn (gen_cbranchsi4 (gen_rtx_NE (Pmode, src_reg, final_src), - src_reg, final_src, label)); -+ -+ } - - /* Mop up any left-over bytes. */ - if (leftover) -@@ -1561,14 +1569,20 @@ microblaze_function_arg_advance (cumulative_args_t cum_v, - break; - - case E_DFmode: -- cum->arg_words += 2; -+ if (TARGET_MB_64) -+ cum->arg_words++; -+ else -+ cum->arg_words += 2; - if (!cum->gp_reg_found && cum->arg_number <= 2) - cum->fp_code += 2 << ((cum->arg_number - 1) * 2); - break; - - case E_DImode: - cum->gp_reg_found = 1; -- cum->arg_words += 2; -+ if (TARGET_MB_64) -+ cum->arg_words++; -+ else -+ cum->arg_words += 2; - break; - - case E_QImode: -@@ -2219,7 +2233,7 @@ compute_frame_size (HOST_WIDE_INT size) - - if (regno != MB_ABI_SUB_RETURN_ADDR_REGNUM) - /* Don't account for link register. It is accounted specially below. */ -- gp_reg_size += GET_MODE_SIZE (SImode); -+ gp_reg_size += GET_MODE_SIZE (Pmode); - - mask |= (1L << (regno - GP_REG_FIRST)); - } -@@ -2487,7 +2501,7 @@ print_operand (FILE * file, rtx op, int letter) - - if ((letter == 'M' && !WORDS_BIG_ENDIAN) - || (letter == 'L' && WORDS_BIG_ENDIAN) || letter == 'D') -- regnum++; -+ regnum++; - - fprintf (file, "%s", reg_names[regnum]); - } -@@ -2513,6 +2527,7 @@ print_operand (FILE * file, rtx op, int letter) - else if (letter == 'h' || letter == 'j') - { - long val[2]; -+ int val1[2]; - long l[2]; - if (code == CONST_DOUBLE) - { -@@ -2525,12 +2540,12 @@ print_operand (FILE * file, rtx op, int letter) - val[0] = l[WORDS_BIG_ENDIAN != 0]; - } - } -- else if (code == CONST_INT) -+ else if (code == CONST_INT || code == CONST)// || code == SYMBOL_REF ||code == LABEL_REF) - { -- val[0] = (INTVAL (op) & 0xffffffff00000000LL) >> 32; -- val[1] = INTVAL (op) & 0x00000000ffffffffLL; -+ val1[0] = (INTVAL (op) & 0xffffffff00000000LL) >> 32; -+ val1[1] = INTVAL (op) & 0x00000000ffffffffLL; - } -- fprintf (file, "0x%8.8lx", (letter == 'h') ? val[0] : val[1]); -+ fprintf (file, "0x%8.8lx", (letter == 'h') ? val1[0] : val1[1]); - } - else if (code == CONST_DOUBLE) - { -@@ -2713,7 +2728,10 @@ microblaze_asm_constructor (rtx symbol ATTRIBUTE_UNUSED, int priority) - - switch_to_section (get_section (section, 0, NULL)); - assemble_align (POINTER_SIZE); -- fputs ("\t.word\t", asm_out_file); -+ if (TARGET_MB_64) -+ fputs ("\t.dword\t", asm_out_file); -+ else -+ fputs ("\t.word\t", asm_out_file); - output_addr_const (asm_out_file, symbol); - fputs ("\n", asm_out_file); - } -@@ -2736,7 +2754,10 @@ microblaze_asm_destructor (rtx symbol, int priority) - - switch_to_section (get_section (section, 0, NULL)); - assemble_align (POINTER_SIZE); -- fputs ("\t.word\t", asm_out_file); -+ if (TARGET_MB_64) -+ fputs ("\t.dword\t", asm_out_file); -+ else -+ fputs ("\t.word\t", asm_out_file); - output_addr_const (asm_out_file, symbol); - fputs ("\n", asm_out_file); - } -@@ -2802,7 +2823,7 @@ save_restore_insns (int prologue) - /* For interrupt_handlers, need to save/restore the MSR. */ - if (microblaze_is_interrupt_variant ()) - { -- isr_mem_rtx = gen_rtx_MEM (SImode, -+ isr_mem_rtx = gen_rtx_MEM (Pmode, - gen_rtx_PLUS (Pmode, base_reg_rtx, - GEN_INT (current_frame_info. - gp_offset - -@@ -2810,8 +2831,8 @@ save_restore_insns (int prologue) - - /* Do not optimize in flow analysis. */ - MEM_VOLATILE_P (isr_mem_rtx) = 1; -- isr_reg_rtx = gen_rtx_REG (SImode, MB_ABI_MSR_SAVE_REG); -- isr_msr_rtx = gen_rtx_REG (SImode, ST_REG); -+ isr_reg_rtx = gen_rtx_REG (Pmode, MB_ABI_MSR_SAVE_REG); -+ isr_msr_rtx = gen_rtx_REG (Pmode, ST_REG); - } - - if (microblaze_is_interrupt_variant () && !prologue) -@@ -2819,8 +2840,8 @@ save_restore_insns (int prologue) - emit_move_insn (isr_reg_rtx, isr_mem_rtx); - emit_move_insn (isr_msr_rtx, isr_reg_rtx); - /* Do not optimize in flow analysis. */ -- emit_insn (gen_rtx_USE (SImode, isr_reg_rtx)); -- emit_insn (gen_rtx_USE (SImode, isr_msr_rtx)); -+ emit_insn (gen_rtx_USE (Pmode, isr_reg_rtx)); -+ emit_insn (gen_rtx_USE (Pmode, isr_msr_rtx)); - } - - for (regno = GP_REG_FIRST; regno <= GP_REG_LAST; regno++) -@@ -2831,9 +2852,9 @@ save_restore_insns (int prologue) - /* Don't handle here. Already handled as the first register. */ - continue; - -- reg_rtx = gen_rtx_REG (SImode, regno); -+ reg_rtx = gen_rtx_REG (Pmode, regno); - insn = gen_rtx_PLUS (Pmode, base_reg_rtx, GEN_INT (gp_offset)); -- mem_rtx = gen_rtx_MEM (SImode, insn); -+ mem_rtx = gen_rtx_MEM (Pmode, insn); - if (microblaze_is_interrupt_variant () || save_volatiles) - /* Do not optimize in flow analysis. */ - MEM_VOLATILE_P (mem_rtx) = 1; -@@ -2848,7 +2869,7 @@ save_restore_insns (int prologue) - insn = emit_move_insn (reg_rtx, mem_rtx); - } - -- gp_offset += GET_MODE_SIZE (SImode); -+ gp_offset += GET_MODE_SIZE (Pmode); - } - } - -@@ -2858,8 +2879,8 @@ save_restore_insns (int prologue) - emit_move_insn (isr_mem_rtx, isr_reg_rtx); - - /* Do not optimize in flow analysis. */ -- emit_insn (gen_rtx_USE (SImode, isr_reg_rtx)); -- emit_insn (gen_rtx_USE (SImode, isr_msr_rtx)); -+ emit_insn (gen_rtx_USE (Pmode, isr_reg_rtx)); -+ emit_insn (gen_rtx_USE (Pmode, isr_msr_rtx)); - } - - /* Done saving and restoring */ -@@ -2949,7 +2970,10 @@ microblaze_elf_asm_cdtor (rtx symbol, int priority, bool is_ctor) - - switch_to_section (s); - assemble_align (POINTER_SIZE); -- fputs ("\t.word\t", asm_out_file); -+ if (TARGET_MB_64) -+ fputs ("\t.dword\t", asm_out_file); -+ else -+ fputs ("\t.word\t", asm_out_file); - output_addr_const (asm_out_file, symbol); - fputs ("\n", asm_out_file); - } -@@ -3095,10 +3119,10 @@ microblaze_expand_prologue (void) - { - if (offset != 0) - ptr = gen_rtx_PLUS (Pmode, stack_pointer_rtx, GEN_INT (offset)); -- emit_move_insn (gen_rtx_MEM (SImode, ptr), -- gen_rtx_REG (SImode, regno)); -+ emit_move_insn (gen_rtx_MEM (Pmode, ptr), -+ gen_rtx_REG (Pmode, regno)); - -- offset += GET_MODE_SIZE (SImode); -+ offset += GET_MODE_SIZE (Pmode); - } - - } -@@ -3108,15 +3132,23 @@ microblaze_expand_prologue (void) - rtx fsiz_rtx = GEN_INT (fsiz); - - rtx_insn *insn = NULL; -- insn = emit_insn (gen_subsi3 (stack_pointer_rtx, stack_pointer_rtx, -+ if (TARGET_MB_64) -+ { -+ -+ insn = emit_insn (gen_subdi3 (stack_pointer_rtx, stack_pointer_rtx, - fsiz_rtx)); -+ } -+ else { -+ insn = emit_insn (gen_subsi3 (stack_pointer_rtx, stack_pointer_rtx, -+ fsiz_rtx)); -+ } - if (insn) - RTX_FRAME_RELATED_P (insn) = 1; - - /* Handle SUB_RETURN_ADDR_REGNUM specially at first. */ - if (!crtl->is_leaf || interrupt_handler) - { -- mem_rtx = gen_rtx_MEM (SImode, -+ mem_rtx = gen_rtx_MEM (Pmode, - gen_rtx_PLUS (Pmode, stack_pointer_rtx, - const0_rtx)); - -@@ -3124,7 +3156,7 @@ microblaze_expand_prologue (void) - /* Do not optimize in flow analysis. */ - MEM_VOLATILE_P (mem_rtx) = 1; - -- reg_rtx = gen_rtx_REG (SImode, MB_ABI_SUB_RETURN_ADDR_REGNUM); -+ reg_rtx = gen_rtx_REG (Pmode, MB_ABI_SUB_RETURN_ADDR_REGNUM); - insn = emit_move_insn (mem_rtx, reg_rtx); - RTX_FRAME_RELATED_P (insn) = 1; - } -@@ -3224,12 +3256,12 @@ microblaze_expand_epilogue (void) - if (!crtl->is_leaf || interrupt_handler) - { - mem_rtx = -- gen_rtx_MEM (SImode, -+ gen_rtx_MEM (Pmode, - gen_rtx_PLUS (Pmode, stack_pointer_rtx, const0_rtx)); - if (interrupt_handler) - /* Do not optimize in flow analysis. */ - MEM_VOLATILE_P (mem_rtx) = 1; -- reg_rtx = gen_rtx_REG (SImode, MB_ABI_SUB_RETURN_ADDR_REGNUM); -+ reg_rtx = gen_rtx_REG (Pmode, MB_ABI_SUB_RETURN_ADDR_REGNUM); - emit_move_insn (reg_rtx, mem_rtx); - } - -@@ -3245,15 +3277,25 @@ microblaze_expand_epilogue (void) - /* _restore_ registers for epilogue. */ - save_restore_insns (0); - emit_insn (gen_blockage ()); -- emit_insn (gen_addsi3 (stack_pointer_rtx, stack_pointer_rtx, fsiz_rtx)); -+ if (TARGET_MB_64) -+ emit_insn (gen_adddi3 (stack_pointer_rtx, stack_pointer_rtx, fsiz_rtx)); -+ else -+ emit_insn (gen_addsi3 (stack_pointer_rtx, stack_pointer_rtx, fsiz_rtx)); - } - - if (crtl->calls_eh_return) -- emit_insn (gen_addsi3 (stack_pointer_rtx, -+ if (TARGET_MB_64) { -+ emit_insn (gen_adddi3 (stack_pointer_rtx, - stack_pointer_rtx, -- gen_raw_REG (SImode, -+ gen_raw_REG (Pmode, - MB_EH_STACKADJ_REGNUM))); -- -+ } -+ else { -+ emit_insn (gen_addsi3 (stack_pointer_rtx, -+ stack_pointer_rtx, -+ gen_raw_REG (Pmode, -+ MB_EH_STACKADJ_REGNUM))); -+ } - emit_jump_insn (gen_return_internal (gen_rtx_REG (Pmode, GP_REG_FIRST + - MB_ABI_SUB_RETURN_ADDR_REGNUM))); - } -@@ -3402,9 +3444,14 @@ microblaze_asm_output_mi_thunk (FILE *file, tree thunk_fndecl ATTRIBUTE_UNUSED, - else - this_rtx = gen_rtx_REG (Pmode, MB_ABI_FIRST_ARG_REGNUM); - -- /* Apply the constant offset, if required. */ -+ /* Apply the constant offset, if required. */ - if (delta) -- emit_insn (gen_addsi3 (this_rtx, this_rtx, GEN_INT (delta))); -+ { -+ if (TARGET_MB_64) -+ emit_insn (gen_adddi3 (this_rtx, this_rtx, GEN_INT (delta))); -+ else -+ emit_insn (gen_addsi3 (this_rtx, this_rtx, GEN_INT (delta))); -+ } - - /* Apply the offset from the vtable, if required. */ - if (vcall_offset) -@@ -3417,7 +3464,10 @@ microblaze_asm_output_mi_thunk (FILE *file, tree thunk_fndecl ATTRIBUTE_UNUSED, - rtx loc = gen_rtx_PLUS (Pmode, temp1, vcall_offset_rtx); - emit_move_insn (temp1, gen_rtx_MEM (Pmode, loc)); - -- emit_insn (gen_addsi3 (this_rtx, this_rtx, temp1)); -+ if (TARGET_MB_64) -+ emit_insn (gen_adddi3 (this_rtx, this_rtx, temp1)); -+ else -+ emit_insn (gen_addsi3 (this_rtx, this_rtx, temp1)); - } - - /* Generate a tail call to the target function. */ -@@ -3564,7 +3614,7 @@ microblaze_eh_return (rtx op0) - /* Queue an .ident string in the queue of top-level asm statements. - If the string size is below the threshold, put it into .sdata2. - If the front-end is done, we must be being called from toplev.c. -- In that case, do nothing. */ -+ In that case, do nothing. */ - void - microblaze_asm_output_ident (const char *string) - { -@@ -3619,9 +3669,9 @@ microblaze_trampoline_init (rtx m_tramp, tree fndecl, rtx chain_value) - emit_block_move (m_tramp, assemble_trampoline_template (), - GEN_INT (6*UNITS_PER_WORD), BLOCK_OP_NORMAL); - -- mem = adjust_address (m_tramp, SImode, 16); -+ mem = adjust_address (m_tramp, Pmode, 16); - emit_move_insn (mem, chain_value); -- mem = adjust_address (m_tramp, SImode, 20); -+ mem = adjust_address (m_tramp, Pmode, 20); - emit_move_insn (mem, fnaddr); - } - -@@ -3645,7 +3695,7 @@ microblaze_expand_conditional_branch (machine_mode mode, rtx operands[]) - { - comp_reg = cmp_op0; - condition = gen_rtx_fmt_ee (signed_condition (code), mode, comp_reg, const0_rtx); -- if (mode == SImode) -+ if (mode == Pmode) - emit_jump_insn (gen_condjump (condition, label1)); - else - emit_jump_insn (gen_long_condjump (condition, label1)); -@@ -3764,7 +3814,7 @@ microblaze_expand_conditional_branch_sf (rtx operands[]) - rtx comp_reg = gen_reg_rtx (SImode); - - emit_insn (gen_cstoresf4 (comp_reg, operands[0], cmp_op0, cmp_op1)); -- condition = gen_rtx_NE (SImode, comp_reg, const0_rtx); -+ condition = gen_rtx_NE (Pmode, comp_reg, const0_rtx); - emit_jump_insn (gen_condjump (condition, operands[3])); - } - -@@ -3774,10 +3824,10 @@ microblaze_expand_conditional_branch_df (rtx operands[]) - rtx condition; - rtx cmp_op0 = XEXP (operands[0], 0); - rtx cmp_op1 = XEXP (operands[0], 1); -- rtx comp_reg = gen_reg_rtx (DImode); -+ rtx comp_reg = gen_reg_rtx (Pmode); - - emit_insn (gen_cstoredf4 (comp_reg, operands[0], cmp_op0, cmp_op1)); -- condition = gen_rtx_NE (DImode, comp_reg, const0_rtx); -+ condition = gen_rtx_NE (Pmode, comp_reg, const0_rtx); - emit_jump_insn (gen_long_condjump (condition, operands[3])); - } - -@@ -3798,8 +3848,8 @@ microblaze_expand_divide (rtx operands[]) - { - /* Table lookup software divides. Works for all (nr/dr) where (0 <= nr,dr <= 15). */ - -- rtx regt1 = gen_reg_rtx (SImode); -- rtx reg18 = gen_rtx_REG (SImode, R_TMP); -+ rtx regt1 = gen_reg_rtx (Pmode); -+ rtx reg18 = gen_rtx_REG (Pmode, R_TMP); - rtx regqi = gen_reg_rtx (QImode); - rtx_code_label *div_label = gen_label_rtx (); - rtx_code_label *div_end_label = gen_label_rtx (); -@@ -3807,17 +3857,31 @@ microblaze_expand_divide (rtx operands[]) - rtx mem_rtx; - rtx ret; - rtx_insn *jump, *cjump, *insn; -- -- insn = emit_insn (gen_iorsi3 (regt1, operands[1], operands[2])); -- cjump = emit_jump_insn_after (gen_cbranchsi4 ( -- gen_rtx_GTU (SImode, regt1, GEN_INT (15)), -+ -+ if (TARGET_MB_64) { -+ insn = emit_insn (gen_iordi3 (regt1, operands[1], operands[2])); -+ cjump = emit_jump_insn_after (gen_cbranchdi4 ( -+ gen_rtx_GTU (Pmode, regt1, GEN_INT (15)), -+ regt1, GEN_INT (15), div_label), insn); -+ } -+ else { -+ insn = emit_insn (gen_iorsi3 (regt1, operands[1], operands[2])); -+ cjump = emit_jump_insn_after (gen_cbranchsi4 ( -+ gen_rtx_GTU (Pmode, regt1, GEN_INT (15)), - regt1, GEN_INT (15), div_label), insn); -+ } - LABEL_NUSES (div_label) = 1; - JUMP_LABEL (cjump) = div_label; -- emit_insn (gen_rtx_CLOBBER (SImode, reg18)); -+ emit_insn (gen_rtx_CLOBBER (Pmode, reg18)); - -- emit_insn (gen_ashlsi3_bshift (regt1, operands[1], GEN_INT(4))); -- emit_insn (gen_addsi3 (regt1, regt1, operands[2])); -+ if (TARGET_MB_64) { -+ emit_insn (gen_ashldi3_long (regt1, operands[1], GEN_INT(4))); -+ emit_insn (gen_adddi3 (regt1, regt1, operands[2])); -+ } -+ else { -+ emit_insn (gen_ashlsi3_bshift (regt1, operands[1], GEN_INT(4))); -+ emit_insn (gen_addsi3 (regt1, regt1, operands[2])); -+ } - mem_rtx = gen_rtx_MEM (QImode, - gen_rtx_PLUS (QImode, regt1, div_table_rtx)); - -@@ -3964,7 +4028,7 @@ insert_wic_for_ilb_runout (rtx_insn *first) - { - insn = - emit_insn_before (gen_iprefetch -- (gen_int_mode (addr_offset, SImode)), -+ (gen_int_mode (addr_offset, Pmode)), - before_4); - recog_memoized (insn); - INSN_LOCATION (insn) = INSN_LOCATION (before_4); -@@ -3974,7 +4038,27 @@ insert_wic_for_ilb_runout (rtx_insn *first) - } - } - } -- -+ -+/* Set the names for various arithmetic operations according to the -+ * MICROBLAZE ABI. */ -+static void -+microblaze_init_libfuncs (void) -+{ -+ set_optab_libfunc (smod_optab, SImode, "__modsi3"); -+ set_optab_libfunc (sdiv_optab, SImode, "__divsi3"); -+ set_optab_libfunc (smul_optab, SImode, "__mulsi3"); -+ set_optab_libfunc (umod_optab, SImode, "__umodsi3"); -+ set_optab_libfunc (udiv_optab, SImode, "__udivsi3"); -+ -+ if (TARGET_MB_64) -+ { -+ set_optab_libfunc (smod_optab, DImode, "__moddi3"); -+ set_optab_libfunc (sdiv_optab, DImode, "__divdi3"); -+ set_optab_libfunc (smul_optab, DImode, "__muldi3"); -+ set_optab_libfunc (umod_optab, DImode, "__umoddi3"); -+ set_optab_libfunc (udiv_optab, DImode, "__udivdi3"); -+ } -+} - /* Insert instruction prefetch instruction at the fall - through path of the function call. */ - -@@ -4127,6 +4211,17 @@ microblaze_starting_frame_offset (void) - #undef TARGET_LRA_P - #define TARGET_LRA_P hook_bool_void_false - -+#ifdef TARGET_MB_64 -+#undef TARGET_ASM_ALIGNED_DI_OP -+#define TARGET_ASM_ALIGNED_DI_OP "\t.dword\t" -+ -+#undef TARGET_ASM_ALIGNED_HI_OP -+#define TARGET_ASM_ALIGNED_HI_OP "\t.hword\t" -+ -+#undef TARGET_ASM_ALIGNED_SI_OP -+#define TARGET_ASM_ALIGNED_SI_OP "\t.word\t" -+#endif -+ - #undef TARGET_FRAME_POINTER_REQUIRED - #define TARGET_FRAME_POINTER_REQUIRED microblaze_frame_pointer_required - -@@ -4136,6 +4231,9 @@ microblaze_starting_frame_offset (void) - #undef TARGET_TRAMPOLINE_INIT - #define TARGET_TRAMPOLINE_INIT microblaze_trampoline_init - -+#undef TARGET_INIT_LIBFUNCS -+#define TARGET_INIT_LIBFUNCS microblaze_init_libfuncs -+ - #undef TARGET_PROMOTE_FUNCTION_MODE - #define TARGET_PROMOTE_FUNCTION_MODE default_promote_function_mode_always_promote - -diff --git a/gcc/config/microblaze/microblaze.h b/gcc/config/microblaze/microblaze.h -index 72fbee5..1e60513 100644 ---- a/gcc/config/microblaze/microblaze.h -+++ b/gcc/config/microblaze/microblaze.h -@@ -173,7 +173,6 @@ extern enum pipeline_type microblaze_pipe; - - /* Generate DWARF exception handling info. */ - #define DWARF2_UNWIND_INFO 1 -- - /* Don't generate .loc operations. */ - #define DWARF2_ASM_LINE_DEBUG_INFO 0 - -@@ -206,38 +205,51 @@ extern enum pipeline_type microblaze_pipe; - ((flag_pic || GLOBAL) ? DW_EH_PE_aligned : DW_EH_PE_absptr) - - /* Use DWARF 2 debugging information by default. */ --#define DWARF2_DEBUGGING_INFO -+#define DWARF2_DEBUGGING_INFO 1 - #define PREFERRED_DEBUGGING_TYPE DWARF2_DEBUG -+#define DWARF2_ADDR_SIZE 4 - - /* Target machine storage layout */ - - #define BITS_BIG_ENDIAN 0 - #define BYTES_BIG_ENDIAN (TARGET_LITTLE_ENDIAN == 0) - #define WORDS_BIG_ENDIAN (BYTES_BIG_ENDIAN) --#define BITS_PER_WORD 32 --#define UNITS_PER_WORD 4 -+//#define BITS_PER_WORD 64 -+//Revisit -+#define MAX_BITS_PER_WORD 64 -+#define UNITS_PER_WORD (TARGET_MB_64 ? 8 : 4) -+//#define MIN_UNITS_PER_WORD (TARGET_MB_64 ? 8 : 4) -+//#define UNITS_PER_WORD 4 - #define MIN_UNITS_PER_WORD 4 - #define INT_TYPE_SIZE 32 - #define SHORT_TYPE_SIZE 16 --#define LONG_TYPE_SIZE 64 -+#define LONG_TYPE_SIZE (TARGET_MB_64 ? 64 : 32) - #define LONG_LONG_TYPE_SIZE 64 - #define FLOAT_TYPE_SIZE 32 - #define DOUBLE_TYPE_SIZE 64 - #define LONG_DOUBLE_TYPE_SIZE 64 --#define POINTER_SIZE 32 --#define PARM_BOUNDARY 32 --#define FUNCTION_BOUNDARY 32 --#define EMPTY_FIELD_BOUNDARY 32 -+#define POINTER_SIZE (TARGET_MB_64 ? 64 : 32) -+//#define WIDEST_HARDWARE_FP_SIZE 64 -+//#define POINTERS_EXTEND_UNSIGNED 1 -+#define PARM_BOUNDARY (TARGET_MB_64 ? 64 : 32) -+#define FUNCTION_BOUNDARY (TARGET_MB_64 ? 64 : 32) -+#define EMPTY_FIELD_BOUNDARY (TARGET_MB_64 ? 64 : 32) - #define STRUCTURE_SIZE_BOUNDARY 8 --#define BIGGEST_ALIGNMENT 32 -+#define BIGGEST_ALIGNMENT (TARGET_MB_64 ? 64 : 32) - #define STRICT_ALIGNMENT 1 - #define PCC_BITFIELD_TYPE_MATTERS 1 - -+//#define MAX_FIXED_MODE_SIZE GET_MODE_BITSIZE (TARGET_MB_64 ? TImode : DImode) - #undef SIZE_TYPE --#define SIZE_TYPE "unsigned int" -+#define SIZE_TYPE (TARGET_MB_64 ? "long unsigned int" : "unsigned int") - - #undef PTRDIFF_TYPE --#define PTRDIFF_TYPE "int" -+#define PTRDIFF_TYPE (TARGET_MB_64 ? "long int" : "int") -+ -+/*#undef INTPTR_TYPE -+#define INTPTR_TYPE (TARGET_MB_64 ? "long int" : "int")*/ -+#undef UINTPTR_TYPE -+#define UINTPTR_TYPE (TARGET_MB_64 ? "long unsigned int" : "unsigned int") - - #define DATA_ALIGNMENT(TYPE, ALIGN) \ - ((((ALIGN) < BITS_PER_WORD) \ -@@ -253,12 +265,12 @@ extern enum pipeline_type microblaze_pipe; - #define WORD_REGISTER_OPERATIONS 1 - - #define LOAD_EXTEND_OP(MODE) ZERO_EXTEND -- -+/* - #define PROMOTE_MODE(MODE, UNSIGNEDP, TYPE) \ - if (GET_MODE_CLASS (MODE) == MODE_INT \ -- && GET_MODE_SIZE (MODE) < 4) \ -- (MODE) = SImode; -- -+ && GET_MODE_SIZE (MODE) < (TARGET_MB_64 ? 8 : 4)) \ -+ (MODE) = TARGET_MB_64 ? DImode : SImode; -+*/ - /* Standard register usage. */ - - /* On the MicroBlaze, we have 32 integer registers */ -@@ -438,13 +450,16 @@ extern struct microblaze_frame_info current_frame_info; - #define FIRST_PARM_OFFSET(FNDECL) (UNITS_PER_WORD) - - #define ARG_POINTER_CFA_OFFSET(FNDECL) 0 -+#define DWARF_CIE_DATA_ALIGNMENT -1 - - #define REG_PARM_STACK_SPACE(FNDECL) microblaze_reg_parm_stack_space(FNDECL) - - #define OUTGOING_REG_PARM_STACK_SPACE(FNTYPE) 1 - --#define STACK_BOUNDARY 32 -+#define STACK_BOUNDARY (TARGET_MB_64 ? 64 : 32) - -+#define PREFERRED_STACK_BOUNDARY (TARGET_MB_64 ? 64 : 32) -+ - #define NUM_OF_ARGS 6 - - #define GP_RETURN (GP_REG_FIRST + MB_ABI_INT_RETURN_VAL_REGNUM) -@@ -455,12 +470,15 @@ extern struct microblaze_frame_info current_frame_info; - #define MAX_ARGS_IN_REGISTERS MB_ABI_MAX_ARG_REGS - - #define LIBCALL_VALUE(MODE) \ -+ gen_rtx_REG (MODE,GP_RETURN) -+ -+/*#define LIBCALL_VALUE(MODE) \ - gen_rtx_REG ( \ - ((GET_MODE_CLASS (MODE) != MODE_INT \ - || GET_MODE_SIZE (MODE) >= 4) \ - ? (MODE) \ - : SImode), GP_RETURN) -- -+*/ - /* 1 if N is a possible register number for a function value. - On the MicroBlaze, R2 R3 are the only register thus used. - Currently, R2 are only implemented here (C has no complex type) */ -@@ -500,7 +518,7 @@ typedef struct microblaze_args - /* 4 insns + 2 words of data. */ - #define TRAMPOLINE_SIZE (6 * 4) - --#define TRAMPOLINE_ALIGNMENT 32 -+#define TRAMPOLINE_ALIGNMENT 64 - - #define REGNO_OK_FOR_BASE_P(regno) microblaze_regno_ok_for_base_p ((regno), 1) - -@@ -533,13 +551,13 @@ typedef struct microblaze_args - addresses which require two reload registers. */ - #define LEGITIMATE_PIC_OPERAND_P(X) microblaze_legitimate_pic_operand (X) - --#define CASE_VECTOR_MODE (SImode) -+#define CASE_VECTOR_MODE (TARGET_MB_64? DImode:SImode) - - #ifndef DEFAULT_SIGNED_CHAR - #define DEFAULT_SIGNED_CHAR 1 - #endif - --#define MOVE_MAX 4 -+#define MOVE_MAX (TARGET_MB_64 ? 8 : 4) - #define MAX_MOVE_MAX 8 - - #define SLOW_BYTE_ACCESS 1 -@@ -549,7 +567,7 @@ typedef struct microblaze_args - - #define SHIFT_COUNT_TRUNCATED 1 - --#define Pmode SImode -+#define Pmode (TARGET_MB_64? DImode:SImode) - - #define FUNCTION_MODE SImode - -@@ -711,6 +729,7 @@ do { \ - - #undef TARGET_ASM_OUTPUT_IDENT - #define TARGET_ASM_OUTPUT_IDENT microblaze_asm_output_ident -+//#define TARGET_ASM_OUTPUT_IDENT default_asm_output_ident_directive - - /* Default to -G 8 */ - #ifndef MICROBLAZE_DEFAULT_GVALUE -diff --git a/gcc/config/microblaze/microblaze.md b/gcc/config/microblaze/microblaze.md -index 0cd0441..0f41ac6 100644 ---- a/gcc/config/microblaze/microblaze.md -+++ b/gcc/config/microblaze/microblaze.md -@@ -26,6 +26,7 @@ - ;; Constants - ;;---------------------------------------------------- - (define_constants [ -+ (R_Z 0) ;; For reg r0 - (R_SP 1) ;; Stack pointer reg - (R_SR 15) ;; Sub-routine return addr reg - (R_IR 14) ;; Interrupt return addr reg -@@ -539,6 +540,7 @@ - - ;; Add 2 SImode integers [ src1 = reg ; src2 = arith ; dest = reg ] - ;; Leave carry as is -+ - (define_insn "addsi3" - [(set (match_operand:SI 0 "register_operand" "=d,d,d") - (plus:SI (match_operand:SI 1 "reg_or_0_operand" "%dJ,dJ,dJ") -@@ -560,23 +562,38 @@ - - ;; Adding 2 DI operands in register or reg/imm - --(define_insn "adddi3_long" -+(define_expand "adddi3" -+ [(set (match_operand:DI 0 "register_operand" "") -+ (plus:DI (match_operand:DI 1 "register_operand" "") -+ (match_operand:DI 2 "arith_plus_operand" "")))] -+"" -+{ -+ if (TARGET_MB_64) -+ { -+ if (GET_CODE (operands[2]) == CONST_INT && -+ INTVAL(operands[2]) < (long)-549755813888 && -+ INTVAL(operands[2]) > (long)549755813887) -+ FAIL; -+ } -+}) -+ -+(define_insn "*adddi3_long" - [(set (match_operand:DI 0 "register_operand" "=d,d") -- (plus:DI (match_operand:DI 1 "reg_or_0_operand" "%dJ,dJ") -+ (plus:DI (match_operand:DI 1 "register_operand" "%d,d") - (match_operand:DI 2 "arith_plus_operand" "d,K")))] - "TARGET_MB_64" - "@ -- addlk\t%0,%z1,%2 -- addlik\t%0,%z1,%2" -- [(set_attr "type" "arith,arith") -- (set_attr "mode" "DI,DI") -+ addlk\t%0,%1,%2 -+ addlik\t%0,%1,%2 #N10" -+ [(set_attr "type" "darith,no_delay_arith") -+ (set_attr "mode" "DI") - (set_attr "length" "4,4")]) - --(define_insn "adddi3" -+(define_insn "*adddi3_all" - [(set (match_operand:DI 0 "register_operand" "=d,d") - (plus:DI (match_operand:DI 1 "register_operand" "%d,d") - (match_operand:DI 2 "arith_operand" "d,i")))] -- "" -+ "!TARGET_MB_64" - "@ - add\t%L0,%L1,%L2\;addc\t%M0,%M1,%M2 - addi\t%L0,%L1,%j2\;addic\t%M0,%M1,%h2" -@@ -603,7 +620,7 @@ - (define_insn "iprefetch" - [(unspec [(match_operand:SI 0 "const_int_operand" "n")] UNSPEC_IPREFETCH) - (clobber (mem:BLK (scratch)))] -- "TARGET_PREFETCH" -+ "TARGET_PREFETCH && !TARGET_MB_64" - { - operands[2] = gen_rtx_REG (SImode, MB_ABI_ASM_TEMP_REGNUM); - return "mfs\t%2,rpc\n\twic\t%2,r0"; -@@ -616,23 +633,33 @@ - ;; Double Precision Subtraction - ;;---------------------------------------------------------------- - --(define_insn "subdi3_long" -- [(set (match_operand:DI 0 "register_operand" "=d,d") -- (minus:DI (match_operand:DI 1 "register_operand" "d,d") -- (match_operand:DI 2 "register_operand" "d,n")))] -+(define_expand "subdi3" -+ [(set (match_operand:DI 0 "register_operand" "") -+ (minus:DI (match_operand:DI 1 "register_operand" "") -+ (match_operand:DI 2 "arith_operand" "")))] -+"" -+" -+{ -+}") -+ -+(define_insn "subsidi3" -+ [(set (match_operand:DI 0 "register_operand" "=d,d,d") -+ (minus:DI (match_operand:DI 1 "register_operand" "d,d,d") -+ (match_operand:DI 2 "arith_operand" "d,K,n")))] - "TARGET_MB_64" - "@ - rsubl\t%0,%2,%1 -- addlik\t%0,%z1,-%2" -- [(set_attr "type" "darith") -- (set_attr "mode" "DI,DI") -- (set_attr "length" "4,4")]) -+ addik\t%0,%z1,-%2 -+ addik\t%0,%z1,-%2" -+ [(set_attr "type" "arith,no_delay_arith,no_delay_arith") -+ (set_attr "mode" "DI") -+ (set_attr "length" "4,4,4")]) - --(define_insn "subdi3" -+(define_insn "subdi3_small" - [(set (match_operand:DI 0 "register_operand" "=&d") - (minus:DI (match_operand:DI 1 "register_operand" "d") - (match_operand:DI 2 "register_operand" "d")))] -- "" -+ "!TARGET_MB_64" - "rsub\t%L0,%L2,%L1\;rsubc\t%M0,%M2,%M1" - [(set_attr "type" "darith") - (set_attr "mode" "DI") -@@ -661,7 +688,7 @@ - (mult:DI - (sign_extend:DI (match_operand:SI 1 "register_operand" "d")) - (sign_extend:DI (match_operand:SI 2 "register_operand" "d"))))] -- "!TARGET_SOFT_MUL && TARGET_MULTIPLY_HIGH" -+ "!TARGET_SOFT_MUL && TARGET_MULTIPLY_HIGH && !TARGET_MB_64" - "mul\t%L0,%1,%2\;mulh\t%M0,%1,%2" - [(set_attr "type" "no_delay_arith") - (set_attr "mode" "DI") -@@ -672,7 +699,7 @@ - (mult:DI - (zero_extend:DI (match_operand:SI 1 "register_operand" "d")) - (zero_extend:DI (match_operand:SI 2 "register_operand" "d"))))] -- "!TARGET_SOFT_MUL && TARGET_MULTIPLY_HIGH" -+ "!TARGET_SOFT_MUL && TARGET_MULTIPLY_HIGH && !TARGET_MB_64" - "mul\t%L0,%1,%2\;mulhu\t%M0,%1,%2" - [(set_attr "type" "no_delay_arith") - (set_attr "mode" "DI") -@@ -683,7 +710,7 @@ - (mult:DI - (zero_extend:DI (match_operand:SI 1 "register_operand" "d")) - (sign_extend:DI (match_operand:SI 2 "register_operand" "d"))))] -- "!TARGET_SOFT_MUL && TARGET_MULTIPLY_HIGH" -+ "!TARGET_SOFT_MUL && TARGET_MULTIPLY_HIGH && !TARGET_MB_64" - "mul\t%L0,%1,%2\;mulhsu\t%M0,%2,%1" - [(set_attr "type" "no_delay_arith") - (set_attr "mode" "DI") -@@ -787,7 +814,7 @@ - (match_operand:SI 4 "arith_operand")]) - (label_ref (match_operand 5)) - (pc)))] -- "TARGET_HARD_FLOAT" -+ "TARGET_HARD_FLOAT && !TARGET_MB_64" - [(set (match_dup 1) (match_dup 3))] - - { -@@ -817,6 +844,15 @@ - (set_attr "mode" "SI") - (set_attr "length" "4")]) - -+(define_insn "negsi_long" -+ [(set (match_operand:SI 0 "register_operand" "=d") -+ (neg:SI (match_operand:DI 1 "register_operand" "d")))] -+ "" -+ "rsubk\t%0,%1,r0" -+ [(set_attr "type" "arith") -+ (set_attr "mode" "SI") -+ (set_attr "length" "4")]) -+ - (define_insn "negdi2_long" - [(set (match_operand:DI 0 "register_operand" "=d") - (neg:DI (match_operand:DI 1 "register_operand" "d")))] -@@ -845,16 +881,24 @@ - (set_attr "mode" "SI") - (set_attr "length" "4")]) - --(define_insn "one_cmpldi2_long" -+(define_expand "one_cmpldi2" -+ [(set (match_operand:DI 0 "register_operand" "") -+ (not:DI (match_operand:DI 1 "register_operand" "")))] -+ "" -+ " -+{ -+}") -+ -+(define_insn "" - [(set (match_operand:DI 0 "register_operand" "=d") -- (not:DI (match_operand:DI 1 "register_operand" "d")))] -+ (not:DI (match_operand:DI 1 "arith_operand" "d")))] - "TARGET_MB_64" - "xorli\t%0,%1,-1" -- [(set_attr "type" "arith") -+ [(set_attr "type" "no_delay_arith") - (set_attr "mode" "DI") - (set_attr "length" "4")]) - --(define_insn "*one_cmpldi2" -+(define_insn "" - [(set (match_operand:DI 0 "register_operand" "=d") - (not:DI (match_operand:DI 1 "register_operand" "d")))] - "" -@@ -869,7 +913,8 @@ - (not:DI (match_operand:DI 1 "register_operand" "")))] - "reload_completed - && GET_CODE (operands[0]) == REG && GP_REG_P (REGNO (operands[0])) -- && GET_CODE (operands[1]) == REG && GP_REG_P (REGNO (operands[1]))" -+ && GET_CODE (operands[1]) == REG && GP_REG_P (REGNO (operands[1])) -+ && !TARGET_MB_64" - - [(set (subreg:SI (match_dup 0) 0) (not:SI (subreg:SI (match_dup 1) 0))) - (set (subreg:SI (match_dup 0) 4) (not:SI (subreg:SI (match_dup 1) 4)))] -@@ -881,18 +926,17 @@ - ;;---------------------------------------------------------------- - - (define_insn "anddi3" -- [(set (match_operand:DI 0 "register_operand" "=d,d") -- (and:DI (match_operand:DI 1 "arith_operand" "d,d") -- (match_operand:DI 2 "arith_operand" "d,K")))] -+ [(set (match_operand:DI 0 "register_operand" "=d,d,d") -+ (and:DI (match_operand:DI 1 "arith_operand" "d,d,d") -+ (match_operand:DI 2 "arith_operand" "d,K,I")))] - "TARGET_MB_64" - "@ - andl\t%0,%1,%2 -- andli\t%0,%1,%2 #andl1" -- ;; andli\t%0,%1,%2 #andl3 -- ;; andli\t%0,%1,%2 #andl2 -- [(set_attr "type" "arith,arith") -- (set_attr "mode" "DI,DI") -- (set_attr "length" "4,4")]) -+ andli\t%0,%1,%2 #andl2 -+ andli\t%0,%1,%2 #andl3" -+ [(set_attr "type" "arith,no_delay_arith,no_delay_arith") -+ (set_attr "mode" "DI,DI,DI") -+ (set_attr "length" "4,4,4")]) - - (define_insn "andsi3" - [(set (match_operand:SI 0 "register_operand" "=d,d,d,d") -@@ -917,7 +961,7 @@ - "@ - orl\t%0,%1,%2 - orli\t%0,%1,%2 #andl1" -- [(set_attr "type" "arith,arith") -+ [(set_attr "type" "arith,no_delay_arith") - (set_attr "mode" "DI,DI") - (set_attr "length" "4,4")]) - -@@ -943,7 +987,7 @@ - "@ - xorl\t%0,%1,%2 - xorli\t%0,%1,%2 #andl1" -- [(set_attr "type" "arith,arith") -+ [(set_attr "type" "arith,no_delay_arith") - (set_attr "mode" "DI,DI") - (set_attr "length" "4,4")]) - -@@ -1016,26 +1060,6 @@ - (set_attr "mode" "SI") - (set_attr "length" "4")]) - --;;(define_expand "extendqidi2" --;; [(set (match_operand:DI 0 "register_operand" "=d") --;; (sign_extend:DI (match_operand:QI 1 "general_operand" "d")))] --;; "TARGET_MB_64" --;; { --;; if (GET_CODE (operands[1]) != REG) --;; FAIL; --;; } --;;) -- -- --;;(define_insn "extendqidi2" --;; [(set (match_operand:DI 0 "register_operand" "=d") --;; (sign_extend:DI (match_operand:QI 1 "register_operand" "d")))] --;; "TARGET_MB_64" --;; "sextl8\t%0,%1" --;; [(set_attr "type" "arith") --;; (set_attr "mode" "DI") --;; (set_attr "length" "4")]) -- - (define_insn "extendhisi2" - [(set (match_operand:SI 0 "register_operand" "=d") - (sign_extend:SI (match_operand:HI 1 "register_operand" "d")))] -@@ -1058,6 +1082,27 @@ - ;; Those for integer source operand are ordered - ;; widest source type first. - -+(define_insn "extendsidi2_long" -+ [(set (match_operand:DI 0 "register_operand" "=d,d,d") -+ (sign_extend:DI (match_operand:SI 1 "nonimmediate_operand" "d,R,m")))] -+ "TARGET_MB_64" -+ { -+ switch (which_alternative) -+ { -+ case 0: -+ return "sextl32\t%0,%1"; -+ case 1: -+ case 2: -+ { -+ output_asm_insn ("ll%i1\t%0,%1", operands); -+ return "sextl32\t%0,%0"; -+ } -+ } -+ } -+ [(set_attr "type" "multi,multi,multi") -+ (set_attr "mode" "DI") -+ (set_attr "length" "4,8,8")]) -+ - (define_insn "extendsidi2" - [(set (match_operand:DI 0 "register_operand" "=d,d,d") - (sign_extend:DI (match_operand:SI 1 "nonimmediate_operand" "d,R,m")))] -@@ -1088,68 +1133,117 @@ - ;; Unlike most other insns, the move insns can't be split with - ;; different predicates, because register spilling and other parts of - ;; the compiler, have memoized the insn number already. -+;; //} - - (define_expand "movdi" - [(set (match_operand:DI 0 "nonimmediate_operand" "") - (match_operand:DI 1 "general_operand" ""))] - "" - { -- /* If operands[1] is a constant address illegal for pic, then we need to -- handle it just like microblaze_legitimize_address does. */ -- if (flag_pic && pic_address_needs_scratch (operands[1])) -+ if (TARGET_MB_64) -+ { -+ if (microblaze_expand_move (DImode, operands)) DONE; -+ } -+ else - { -+ /* If operands[1] is a constant address illegal for pic, then we need to -+ handle it just like microblaze_legitimize_address does. */ -+ if (flag_pic && pic_address_needs_scratch (operands[1])) -+ { - rtx temp = force_reg (DImode, XEXP (XEXP (operands[1], 0), 0)); - rtx temp2 = XEXP (XEXP (operands[1], 0), 1); - emit_move_insn (operands[0], gen_rtx_PLUS (DImode, temp, temp2)); - DONE; -- } -- -- -- if ((reload_in_progress | reload_completed) == 0 -- && !register_operand (operands[0], DImode) -- && !register_operand (operands[1], DImode) -- && (((GET_CODE (operands[1]) != CONST_INT || INTVAL (operands[1]) != 0) -- && operands[1] != CONST0_RTX (DImode)))) -- { -+ } - -- rtx temp = force_reg (DImode, operands[1]); -- emit_move_insn (operands[0], temp); -- DONE; -+ if ((reload_in_progress | reload_completed) == 0 -+ && !register_operand (operands[0], DImode) -+ && !register_operand (operands[1], DImode) -+ && (((GET_CODE (operands[1]) != CONST_INT || INTVAL (operands[1]) != 0) -+ && operands[1] != CONST0_RTX (DImode)))) -+ { -+ rtx temp = force_reg (DImode, operands[1]); -+ emit_move_insn (operands[0], temp); -+ DONE; -+ } - } - } - ) - -+;; Added for status registers -+(define_insn "movdi_status" -+ [(set (match_operand:DI 0 "register_operand" "=d,d,z") -+ (match_operand:DI 1 "register_operand" "z,d,d"))] -+ "microblaze_is_interrupt_variant () && TARGET_MB_64" -+ "@ -+ mfs\t%0,%1 #mfs -+ addlk\t%0,%1,r0 #add movdi -+ mts\t%0,%1 #mts" -+ [(set_attr "type" "move") -+ (set_attr "mode" "DI") -+ (set_attr "length" "12")]) - --(define_insn "*movdi_internal_64" -- [(set (match_operand:DI 0 "nonimmediate_operand" "=d,d,d,d,d,R,o") -- (match_operand:DI 1 "general_operand" " d,K,J,R,o,d,d"))] -- "TARGET_MB_64 && (INTVAL(operands[1]) < 0x7fffffffff) && (INTVAL(operands[1]) > 0xffffff8000000000)" -+;; This move will be not be moved to delay slot. -+(define_insn "*movdi_internal3" -+ [(set (match_operand:DI 0 "nonimmediate_operand" "=d,d,d") -+ (match_operand:DI 1 "immediate_operand" "J,I,Mnis"))] -+ "TARGET_MB_64 && (register_operand (operands[0], DImode) && -+ (GET_CODE (operands[1]) == CONST_INT && -+ (INTVAL (operands[1]) <= (long)549755813887 && INTVAL (operands[1]) >= (long)-549755813888)))" -+ "@ -+ addlk\t%0,r0,r0\t -+ addlik\t%0,r0,%1\t #N1 %X1 -+ addlik\t%0,r0,%1\t #N2 %X1" -+ [(set_attr "type" "arith,no_delay_arith,no_delay_arith") -+ (set_attr "mode" "DI") -+ (set_attr "length" "4")]) -+ -+;; This move may be used for PLT label operand -+(define_insn "*movdi_internal5_pltop" -+ [(set (match_operand:DI 0 "register_operand" "=d,d") -+ (match_operand:DI 1 "call_insn_operand" ""))] -+ "TARGET_MB_64 && (register_operand (operands[0], Pmode) && -+ PLT_ADDR_P (operands[1]))" -+ { -+ gcc_unreachable (); -+ } -+ [(set_attr "type" "load") -+ (set_attr "mode" "DI") -+ (set_attr "length" "4")]) -+ -+(define_insn "*movdi_internal2" -+ [(set (match_operand:DI 0 "nonimmediate_operand" "=d,d,d, d,d,R,m") -+ (match_operand:DI 1 "move_src_operand" " d,I,Mnis,R,m,dJ,dJ"))] -+ "TARGET_MB_64" - { - switch (which_alternative) - { - case 0: -- return "addlk\t%0,%1"; -- case 1: -- return "addlik\t%0,r0,%1"; -- case 2: -- return "addlk\t%0,r0,r0"; -- case 3: -- case 4: -- return "lli\t%0,%1"; -- case 5: -- case 6: -- return "sli\t%1,%0"; -- } -- return "unreachable"; -- } -- [(set_attr "type" "no_delay_move,no_delay_arith,no_delay_arith,no_delay_load,no_delay_load,no_delay_store,no_delay_store") -+ return "addlk\t%0,%1,r0"; -+ case 1: -+ case 2: -+ if (GET_CODE (operands[1]) == CONST_INT && -+ (INTVAL (operands[1]) > (long)549755813887 || INTVAL (operands[1]) < (long)-549755813888)) -+ return "addlik\t%0,r0,%h1\n\tbsllli\t%0,%0,32\n\taddlik\t%0,%0,%j1 #li => la"; -+ else -+ return "addlik\t%0,r0,%1"; -+ case 3: -+ case 4: -+ return "ll%i1\t%0,%1"; -+ case 5: -+ case 6: -+ return "sl%i0\t%z1,%0"; -+ } -+ } -+ [(set_attr "type" "load,no_delay_load,no_delay_load,no_delay_load,no_delay_load,no_delay_store,no_delay_store") - (set_attr "mode" "DI") -- (set_attr "length" "8,8,8,8,12,8,12")]) -+ (set_attr "length" "4,4,12,4,8,4,8")]) -+ - - (define_insn "*movdi_internal" - [(set (match_operand:DI 0 "nonimmediate_operand" "=d,d,d,d,d,R,o") - (match_operand:DI 1 "general_operand" " d,i,J,R,o,d,d"))] -- "" -+ "!TARGET_MB_64" - { - switch (which_alternative) - { -@@ -1181,7 +1275,8 @@ - "reload_completed - && GET_CODE (operands[0]) == REG && GP_REG_P (REGNO (operands[0])) - && GET_CODE (operands[1]) == REG && GP_REG_P (REGNO (operands[1])) -- && (REGNO(operands[0]) == (REGNO(operands[1]) + 1))" -+ && (REGNO(operands[0]) == (REGNO(operands[1]) + 1)) -+ && !(TARGET_MB_64)" - - [(set (subreg:SI (match_dup 0) 4) (subreg:SI (match_dup 1) 4)) - (set (subreg:SI (match_dup 0) 0) (subreg:SI (match_dup 1) 0))] -@@ -1193,12 +1288,22 @@ - "reload_completed - && GET_CODE (operands[0]) == REG && GP_REG_P (REGNO (operands[0])) - && GET_CODE (operands[1]) == REG && GP_REG_P (REGNO (operands[1])) -- && (REGNO (operands[0]) != (REGNO (operands[1]) + 1))" -+ && (REGNO (operands[0]) != (REGNO (operands[1]) + 1)) -+ && !(TARGET_MB_64)" - - [(set (subreg:SI (match_dup 0) 0) (subreg:SI (match_dup 1) 0)) - (set (subreg:SI (match_dup 0) 4) (subreg:SI (match_dup 1) 4))] - "") - -+(define_insn "movdi_long_int" -+ [(set (match_operand:DI 0 "nonimmediate_operand" "=d") -+ (match_operand:DI 1 "general_operand" "i"))] -+ "" -+ "addlik\t%0,r0,%h1\n\tbsllli\t%0,%0,32\n\taddlik\t%0,%0,%j1 #li => la"; -+ [(set_attr "type" "no_delay_arith") -+ (set_attr "mode" "DI") -+ (set_attr "length" "12")]) -+ - ;; Unlike most other insns, the move insns can't be split with - ;; different predicates, because register spilling and other parts of - ;; the compiler, have memoized the insn number already. -@@ -1270,6 +1375,8 @@ - (set_attr "length" "4,4,8,4,8,4,8")]) - - -+ -+ - ;; 16-bit Integer moves - - ;; Unlike most other insns, the move insns can't be split with -@@ -1302,8 +1409,8 @@ - "@ - addik\t%0,r0,%1\t# %X1 - addk\t%0,%1,r0 -- lhui\t%0,%1 -- lhui\t%0,%1 -+ lhu%i1\t%0,%1 -+ lhu%i1\t%0,%1 - sh%i0\t%z1,%0 - sh%i0\t%z1,%0" - [(set_attr "type" "arith,move,load,no_delay_load,store,no_delay_store") -@@ -1346,7 +1453,7 @@ - lbu%i1\t%0,%1 - lbu%i1\t%0,%1 - sb%i0\t%z1,%0 -- sbi\t%z1,%0" -+ sb%i0\t%z1,%0" - [(set_attr "type" "arith,arith,move,load,no_delay_load,store,no_delay_store") - (set_attr "mode" "QI") - (set_attr "length" "4,4,8,4,8,4,8")]) -@@ -1419,7 +1526,7 @@ - addik\t%0,r0,%F1 - lw%i1\t%0,%1 - sw%i0\t%z1,%0 -- swi\t%z1,%0" -+ sw%i0\t%z1,%0" - [(set_attr "type" "move,no_delay_load,load,no_delay_load,no_delay_load,store,no_delay_store") - (set_attr "mode" "SF") - (set_attr "length" "4,4,4,4,4,4,4")]) -@@ -1458,6 +1565,33 @@ - ;; movdf_internal - ;; Applies to both TARGET_SOFT_FLOAT and TARGET_HARD_FLOAT - ;; -+(define_insn "*movdf_internal_64" -+ [(set (match_operand:DF 0 "nonimmediate_operand" "=d,d,d,d,d,m") -+ (match_operand:DF 1 "general_operand" "d,dG,m,F,T,d"))] -+ "TARGET_MB_64" -+ { -+ switch (which_alternative) -+ { -+ case 0: -+ return "addlk\t%0,%1,r0"; -+ case 1: -+ return "addlk\t%0,r0,r0"; -+ case 2: -+ case 4: -+ return "ll%i1\t%0,%1"; -+ case 3: -+ { -+ return "addlik\t%0,r0,%h1 \n\tbsllli\t%0,%0,32\n\taddlik\t%0,%0,%j1 #Xfer Lo"; -+ } -+ case 5: -+ return "sl%i0\t%1,%0"; -+ } -+ gcc_unreachable (); -+ } -+ [(set_attr "type" "no_delay_move,no_delay_move,no_delay_load,no_delay_load,no_delay_load,no_delay_store") -+ (set_attr "mode" "DF") -+ (set_attr "length" "4,4,4,16,4,4")]) -+ - (define_insn "*movdf_internal" - [(set (match_operand:DF 0 "nonimmediate_operand" "=d,d,d,d,o") - (match_operand:DF 1 "general_operand" "dG,o,F,T,d"))] -@@ -1492,7 +1626,8 @@ - "reload_completed - && GET_CODE (operands[0]) == REG && GP_REG_P (REGNO (operands[0])) - && GET_CODE (operands[1]) == REG && GP_REG_P (REGNO (operands[1])) -- && (REGNO (operands[0]) == (REGNO (operands[1]) + 1))" -+ && (REGNO (operands[0]) == (REGNO (operands[1]) + 1)) -+ && !TARGET_MB_64" - [(set (subreg:SI (match_dup 0) 4) (subreg:SI (match_dup 1) 4)) - (set (subreg:SI (match_dup 0) 0) (subreg:SI (match_dup 1) 0))] - "") -@@ -1503,7 +1638,8 @@ - "reload_completed - && GET_CODE (operands[0]) == REG && GP_REG_P (REGNO (operands[0])) - && GET_CODE (operands[1]) == REG && GP_REG_P (REGNO (operands[1])) -- && (REGNO (operands[0]) != (REGNO (operands[1]) + 1))" -+ && (REGNO (operands[0]) != (REGNO (operands[1]) + 1)) -+ && !TARGET_MB_64" - [(set (subreg:SI (match_dup 0) 0) (subreg:SI (match_dup 1) 0)) - (set (subreg:SI (match_dup 0) 4) (subreg:SI (match_dup 1) 4))] - "") -@@ -2003,6 +2139,31 @@ else - " - ) - -+ -+(define_insn "seq_internal_pat_long" -+ [(set (match_operand:DI 0 "register_operand" "=d") -+ (eq:DI -+ (match_operand:DI 1 "register_operand" "d") -+ (match_operand:DI 2 "register_operand" "d")))] -+ "TARGET_MB_64" -+ "pcmpleq\t%0,%1,%2" -+ [(set_attr "type" "arith") -+ (set_attr "mode" "DI") -+ (set_attr "length" "4")] -+) -+ -+(define_insn "sne_internal_pat_long" -+ [(set (match_operand:DI 0 "register_operand" "=d") -+ (ne:DI -+ (match_operand:DI 1 "register_operand" "d") -+ (match_operand:DI 2 "register_operand" "d")))] -+ "TARGET_MB_64" -+ "pcmplne\t%0,%1,%2" -+ [(set_attr "type" "arith") -+ (set_attr "mode" "DI") -+ (set_attr "length" "4")] -+) -+ - (define_insn "seq_internal_pat" - [(set (match_operand:SI 0 "register_operand" "=d") - (eq:SI -@@ -2063,8 +2224,8 @@ else - (define_expand "cbranchsi4" - [(set (pc) - (if_then_else (match_operator 0 "ordered_comparison_operator" -- [(match_operand:SI 1 "register_operand") -- (match_operand:SI 2 "arith_operand" "I,i")]) -+ [(match_operand 1 "register_operand") -+ (match_operand 2 "arith_operand" "I,i")]) - (label_ref (match_operand 3 "")) - (pc)))] - "" -@@ -2076,13 +2237,13 @@ else - (define_expand "cbranchsi4_reg" - [(set (pc) - (if_then_else (match_operator 0 "ordered_comparison_operator" -- [(match_operand:SI 1 "register_operand") -- (match_operand:SI 2 "register_operand")]) -+ [(match_operand 1 "register_operand") -+ (match_operand 2 "register_operand")]) - (label_ref (match_operand 3 "")) - (pc)))] - "" - { -- microblaze_expand_conditional_branch_reg (SImode, operands); -+ microblaze_expand_conditional_branch_reg (Pmode, operands); - DONE; - }) - -@@ -2107,6 +2268,26 @@ else - (label_ref (match_operand 1)) - (pc)))]) - -+(define_insn "branch_zero64" -+ [(set (pc) -+ (if_then_else (match_operator 0 "ordered_comparison_operator" -+ [(match_operand 1 "register_operand" "d") -+ (const_int 0)]) -+ (match_operand 2 "pc_or_label_operand" "") -+ (match_operand 3 "pc_or_label_operand" ""))) -+ ] -+ "TARGET_MB_64" -+ { -+ if (operands[3] == pc_rtx) -+ return "bea%C0i%?\t%z1,%2"; -+ else -+ return "bea%N0i%?\t%z1,%3"; -+ } -+ [(set_attr "type" "branch") -+ (set_attr "mode" "none") -+ (set_attr "length" "4")] -+) -+ - (define_insn "branch_zero" - [(set (pc) - (if_then_else (match_operator:SI 0 "ordered_comparison_operator" -@@ -2127,6 +2308,47 @@ else - (set_attr "length" "4")] - ) - -+(define_insn "branch_compare64" -+ [(set (pc) -+ (if_then_else (match_operator 0 "cmp_op" -+ [(match_operand 1 "register_operand" "d") -+ (match_operand 2 "register_operand" "d") -+ ]) -+ (label_ref (match_operand 3)) -+ (pc))) -+ (clobber(reg:SI R_TMP))] -+ "TARGET_MB_64" -+ { -+ operands[4] = gen_rtx_REG (SImode, MB_ABI_ASM_TEMP_REGNUM); -+ enum rtx_code code = GET_CODE (operands[0]); -+ -+ if (code == GT || code == LE) -+ { -+ output_asm_insn ("cmp\tr18,%z1,%z2", operands); -+ code = swap_condition (code); -+ } -+ else if (code == GTU || code == LEU) -+ { -+ output_asm_insn ("cmpu\tr18,%z1,%z2", operands); -+ code = swap_condition (code); -+ } -+ else if (code == GE || code == LT) -+ { -+ output_asm_insn ("cmp\tr18,%z2,%z1", operands); -+ } -+ else if (code == GEU || code == LTU) -+ { -+ output_asm_insn ("cmpu\tr18,%z2,%z1", operands); -+ } -+ -+ operands[0] = gen_rtx_fmt_ee (signed_condition (code), SImode, operands[4], const0_rtx); -+ return "bea%C0i%?\tr18,%3"; -+ } -+ [(set_attr "type" "branch") -+ (set_attr "mode" "none") -+ (set_attr "length" "12")] -+) -+ - (define_insn "branch_compare" - [(set (pc) - (if_then_else (match_operator:SI 0 "cmp_op" -@@ -2310,7 +2532,7 @@ else - ;; Indirect jumps. Jump to register values. Assuming absolute jumps - - (define_insn "indirect_jump_internal1" -- [(set (pc) (match_operand:SI 0 "register_operand" "d"))] -+ [(set (pc) (match_operand 0 "register_operand" "d"))] - "" - "bra%?\t%0" - [(set_attr "type" "jump") -@@ -2323,7 +2545,7 @@ else - (use (label_ref (match_operand 1 "" "")))] - "" - { -- gcc_assert (GET_MODE (operands[0]) == Pmode); -+ //gcc_assert (GET_MODE (operands[0]) == Pmode); - - if (!flag_pic) - emit_jump_insn (gen_tablejump_internal1 (operands[0], operands[1])); -@@ -2335,7 +2557,7 @@ else - - (define_insn "tablejump_internal1" - [(set (pc) -- (match_operand:SI 0 "register_operand" "d")) -+ (match_operand 0 "register_operand" "d")) - (use (label_ref (match_operand 1 "" "")))] - "" - "bra%?\t%0 " -@@ -2345,9 +2567,9 @@ else - - (define_expand "tablejump_internal3" - [(parallel [(set (pc) -- (plus:SI (match_operand:SI 0 "register_operand" "d") -- (label_ref:SI (match_operand:SI 1 "" "")))) -- (use (label_ref:SI (match_dup 1)))])] -+ (plus (match_operand 0 "register_operand" "d") -+ (label_ref (match_operand:SI 1 "" "")))) -+ (use (label_ref (match_dup 1)))])] - "" - "" - ) -@@ -2408,7 +2630,7 @@ else - (minus (reg 1) (match_operand 1 "register_operand" ""))) - (set (reg 1) - (minus (reg 1) (match_dup 1)))] -- "" -+ "!TARGET_MB_64" - { - rtx retaddr = gen_rtx_MEM (Pmode, stack_pointer_rtx); - rtx reg = gen_reg_rtx (Pmode); -@@ -2433,7 +2655,7 @@ else - (define_expand "save_stack_block" - [(match_operand 0 "register_operand" "") - (match_operand 1 "register_operand" "")] -- "" -+ "!TARGET_MB_64" - { - emit_move_insn (operands[0], operands[1]); - DONE; -@@ -2443,7 +2665,7 @@ else - (define_expand "restore_stack_block" - [(match_operand 0 "register_operand" "") - (match_operand 1 "register_operand" "")] -- "" -+ "!TARGET_MB_64" - { - rtx retaddr = gen_rtx_MEM (Pmode, stack_pointer_rtx); - rtx rtmp = gen_rtx_REG (SImode, R_TMP); -@@ -2490,7 +2712,7 @@ else - - (define_insn "<optab>_internal" - [(any_return) -- (use (match_operand:SI 0 "register_operand" ""))] -+ (use (match_operand 0 "register_operand" ""))] - "" - { - if (microblaze_is_break_handler ()) -@@ -2523,7 +2745,7 @@ else - (define_expand "call" - [(parallel [(call (match_operand 0 "memory_operand" "m") - (match_operand 1 "" "i")) -- (clobber (reg:SI R_SR)) -+ (clobber (reg R_SR)) - (use (match_operand 2 "" "")) - (use (match_operand 3 "" ""))])] - "" -@@ -2543,12 +2765,12 @@ else - - if (GET_CODE (XEXP (operands[0], 0)) == UNSPEC) - emit_call_insn (gen_call_internal_plt0 (operands[0], operands[1], -- gen_rtx_REG (SImode, -+ gen_rtx_REG (Pmode, - GP_REG_FIRST + MB_ABI_SUB_RETURN_ADDR_REGNUM), - pic_offset_table_rtx)); - else - emit_call_insn (gen_call_internal0 (operands[0], operands[1], -- gen_rtx_REG (SImode, -+ gen_rtx_REG (Pmode, - GP_REG_FIRST + MB_ABI_SUB_RETURN_ADDR_REGNUM))); - - DONE; -@@ -2558,7 +2780,7 @@ else - (define_expand "call_internal0" - [(parallel [(call (match_operand 0 "" "") - (match_operand 1 "" "")) -- (clobber (match_operand:SI 2 "" ""))])] -+ (clobber (match_operand 2 "" ""))])] - "" - { - } -@@ -2567,18 +2789,34 @@ else - (define_expand "call_internal_plt0" - [(parallel [(call (match_operand 0 "" "") - (match_operand 1 "" "")) -- (clobber (match_operand:SI 2 "" "")) -- (use (match_operand:SI 3 "" ""))])] -+ (clobber (match_operand 2 "" "")) -+ (use (match_operand 3 "" ""))])] - "" - { - } - ) - -+(define_insn "call_internal_plt_64" -+ [(call (mem (match_operand 0 "call_insn_plt_operand" "")) -+ (match_operand 1 "" "i")) -+ (clobber (reg R_SR)) -+ (use (reg R_GOT))] -+ "flag_pic && TARGET_MB_64" -+ { -+ register rtx target2 = gen_rtx_REG (Pmode, -+ GP_REG_FIRST + MB_ABI_SUB_RETURN_ADDR_REGNUM); -+ gen_rtx_CLOBBER (VOIDmode, target2); -+ return "brealid\tr15,%0\;%#"; -+ } -+ [(set_attr "type" "call") -+ (set_attr "mode" "none") -+ (set_attr "length" "4")]) -+ - (define_insn "call_internal_plt" -- [(call (mem (match_operand:SI 0 "call_insn_plt_operand" "")) -- (match_operand:SI 1 "" "i")) -- (clobber (reg:SI R_SR)) -- (use (reg:SI R_GOT))] -+ [(call (mem (match_operand 0 "call_insn_plt_operand" "")) -+ (match_operand 1 "" "i")) -+ (clobber (reg R_SR)) -+ (use (reg R_GOT))] - "flag_pic" - { - register rtx target2 = gen_rtx_REG (Pmode, -@@ -2590,10 +2828,41 @@ else - (set_attr "mode" "none") - (set_attr "length" "4")]) - -+(define_insn "call_internal1_64" -+ [(call (mem (match_operand:VOID 0 "call_insn_simple_operand" "ri")) -+ (match_operand 1 "" "i")) -+ (clobber (reg R_SR))] -+ "TARGET_MB_64" -+ { -+ register rtx target = operands[0]; -+ register rtx target2 = gen_rtx_REG (Pmode, -+ GP_REG_FIRST + MB_ABI_SUB_RETURN_ADDR_REGNUM); -+ if (GET_CODE (target) == SYMBOL_REF) { -+ if (microblaze_break_function_p (SYMBOL_REF_DECL (target))) { -+ gen_rtx_CLOBBER (VOIDmode, target2); -+ return "breaki\tr16,%0\;%#"; -+ } -+ else { -+ gen_rtx_CLOBBER (VOIDmode, target2); -+ return "brealid\tr15,%0\;%#"; -+ } -+ } else if (GET_CODE (target) == CONST_INT) -+ return "la\t%@,r0,%0\;brald\tr15,%@\;%#"; -+ else if (GET_CODE (target) == REG) -+ return "brald\tr15,%0\;%#"; -+ else { -+ fprintf (stderr,"Unsupported call insn\n"); -+ return NULL; -+ } -+ } -+ [(set_attr "type" "call") -+ (set_attr "mode" "none") -+ (set_attr "length" "4")]) -+ - (define_insn "call_internal1" - [(call (mem (match_operand:VOID 0 "call_insn_simple_operand" "ri")) -- (match_operand:SI 1 "" "i")) -- (clobber (reg:SI R_SR))] -+ (match_operand 1 "" "i")) -+ (clobber (reg R_SR))] - "" - { - register rtx target = operands[0]; -@@ -2627,7 +2896,7 @@ else - [(parallel [(set (match_operand 0 "register_operand" "=d") - (call (match_operand 1 "memory_operand" "m") - (match_operand 2 "" "i"))) -- (clobber (reg:SI R_SR)) -+ (clobber (reg R_SR)) - (use (match_operand 3 "" ""))])] ;; next_arg_reg - "" - { -@@ -2647,13 +2916,13 @@ else - if (GET_CODE (XEXP (operands[1], 0)) == UNSPEC) - emit_call_insn (gen_call_value_intern_plt0 (operands[0], operands[1], - operands[2], -- gen_rtx_REG (SImode, -+ gen_rtx_REG (Pmode, - GP_REG_FIRST + MB_ABI_SUB_RETURN_ADDR_REGNUM), - pic_offset_table_rtx)); - else - emit_call_insn (gen_call_value_internal (operands[0], operands[1], - operands[2], -- gen_rtx_REG (SImode, -+ gen_rtx_REG (Pmode, - GP_REG_FIRST + MB_ABI_SUB_RETURN_ADDR_REGNUM))); - - DONE; -@@ -2665,7 +2934,7 @@ else - [(parallel [(set (match_operand 0 "" "") - (call (match_operand 1 "" "") - (match_operand 2 "" ""))) -- (clobber (match_operand:SI 3 "" "")) -+ (clobber (match_operand 3 "" "")) - ])] - "" - {} -@@ -2675,18 +2944,35 @@ else - [(parallel[(set (match_operand 0 "" "") - (call (match_operand 1 "" "") - (match_operand 2 "" ""))) -- (clobber (match_operand:SI 3 "" "")) -- (use (match_operand:SI 4 "" ""))])] -+ (clobber (match_operand 3 "" "")) -+ (use (match_operand 4 "" ""))])] - "flag_pic" - {} - ) - -+(define_insn "call_value_intern_plt_64" -+ [(set (match_operand:VOID 0 "register_operand" "=d") -+ (call (mem (match_operand 1 "call_insn_plt_operand" "")) -+ (match_operand 2 "" "i"))) -+ (clobber (match_operand 3 "register_operand" "=d")) -+ (use (match_operand 4 "register_operand"))] -+ "flag_pic && TARGET_MB_64" -+ { -+ register rtx target2=gen_rtx_REG (Pmode,GP_REG_FIRST + MB_ABI_SUB_RETURN_ADDR_REGNUM); -+ -+ gen_rtx_CLOBBER (VOIDmode,target2); -+ return "brealid\tr15,%1\;%#"; -+ } -+ [(set_attr "type" "call") -+ (set_attr "mode" "none") -+ (set_attr "length" "4")]) -+ - (define_insn "call_value_intern_plt" - [(set (match_operand:VOID 0 "register_operand" "=d") -- (call (mem (match_operand:SI 1 "call_insn_plt_operand" "")) -- (match_operand:SI 2 "" "i"))) -- (clobber (match_operand:SI 3 "register_operand" "=d")) -- (use (match_operand:SI 4 "register_operand"))] -+ (call (mem (match_operand 1 "call_insn_plt_operand" "")) -+ (match_operand 2 "" "i"))) -+ (clobber (match_operand 3 "register_operand" "=d")) -+ (use (match_operand 4 "register_operand"))] - "flag_pic" - { - register rtx target2=gen_rtx_REG (Pmode,GP_REG_FIRST + MB_ABI_SUB_RETURN_ADDR_REGNUM); -@@ -2698,11 +2984,46 @@ else - (set_attr "mode" "none") - (set_attr "length" "4")]) - -+(define_insn "call_value_intern_64" -+ [(set (match_operand:VOID 0 "register_operand" "=d") -+ (call (mem (match_operand:VOID 1 "call_insn_operand" "ri")) -+ (match_operand 2 "" "i"))) -+ (clobber (match_operand 3 "register_operand" "=d"))] -+ "TARGET_MB_64" -+ { -+ register rtx target = operands[1]; -+ register rtx target2=gen_rtx_REG (Pmode,GP_REG_FIRST + MB_ABI_SUB_RETURN_ADDR_REGNUM); -+ -+ if (GET_CODE (target) == SYMBOL_REF) -+ { -+ gen_rtx_CLOBBER (VOIDmode,target2); -+ if (microblaze_break_function_p (SYMBOL_REF_DECL (target))) -+ return "breaki\tr16,%1\;%#"; -+ else if (SYMBOL_REF_FLAGS (target) & SYMBOL_FLAG_FUNCTION) -+ { -+ return "brealid\tr15,%1\;%#"; -+ } -+ else -+ { -+ return "bralid\tr15,%1\;%#"; -+ } -+ } -+ else if (GET_CODE (target) == CONST_INT) -+ return "la\t%@,r0,%1\;brald\tr15,%@\;%#"; -+ else if (GET_CODE (target) == REG) -+ return "brald\tr15,%1\;%#"; -+ else -+ return "Unsupported call insn\n"; -+ } -+ [(set_attr "type" "call") -+ (set_attr "mode" "none") -+ (set_attr "length" "4")]) -+ - (define_insn "call_value_intern" - [(set (match_operand:VOID 0 "register_operand" "=d") - (call (mem (match_operand:VOID 1 "call_insn_operand" "ri")) -- (match_operand:SI 2 "" "i"))) -- (clobber (match_operand:SI 3 "register_operand" "=d"))] -+ (match_operand 2 "" "i"))) -+ (clobber (match_operand 3 "register_operand" "=d"))] - "" - { - register rtx target = operands[1]; -@@ -2864,7 +3185,6 @@ else - - ;;if (!register_operand (operands[0], VOIDmode)) - ;; FAIL; -- - emit_insn (gen_insv_32 (operands[0], operands[1], - operands[2], operands[3])); - DONE; -diff --git a/gcc/config/microblaze/t-microblaze b/gcc/config/microblaze/t-microblaze -index 7671f63..9fc80b1 100644 ---- a/gcc/config/microblaze/t-microblaze -+++ b/gcc/config/microblaze/t-microblaze -@@ -2,10 +2,11 @@ MULTILIB_OPTIONS = mxl-barrel-shift mno-xl-soft-mul mxl-multiply-high mlittle-en - MULTILIB_DIRNAMES = bs m mh le m64 - MULTILIB_EXCEPTIONS = *mxl-barrel-shift/mxl-multiply-high mxl-multiply-high - MULTILIB_EXCEPTIONS += *mxl-barrel-shift/mxl-multiply-high/mlittle-endian --MULTILIB_EXCEPTIONS += *mxl-barrel-shift/mxl-multiply-high/m64 -+MULTILIB_EXCEPTIONS += *mxl-barrel-shift/mxl-multiply-high/mlittle-endian/m64 -+MULTILIB_EXCEPTIONS += *mxl-barrel-shift/mxl-multiply-high/m64 mxl-multiply-high - MULTILIB_EXCEPTIONS += mxl-multiply-high/mlittle-endian --#MULTILIB_EXCEPTIONS += mxl-multiply-high/m64 --#MULTILIB_EXCEPTIONS += *mxl-multiply-high/mlittle-endian/m64 -+MULTILIB_EXCEPTIONS += mxl-multiply-high/m64 -+MULTILIB_EXCEPTIONS += *mxl-multiply-high/mlittle-endian/m64 - - # Extra files - microblaze-c.o: $(srcdir)/config/microblaze/microblaze-c.c \ -diff --git a/libgcc/config/microblaze/crti.S b/libgcc/config/microblaze/crti.S -index 2e15be4..3386520 100644 ---- a/libgcc/config/microblaze/crti.S -+++ b/libgcc/config/microblaze/crti.S -@@ -40,7 +40,7 @@ - - .align 2 - __init: -- addik r1, r1, -8 -+ addik r1, r1, -16 - sw r15, r0, r1 - la r11, r0, _stack - mts rshr, r11 -@@ -51,5 +51,5 @@ __init: - .global __fini - .align 2 - __fini: -- addik r1, r1, -8 -+ addik r1, r1, -16 - sw r15, r0, r1 -diff --git a/libgcc/config/microblaze/crtn.S b/libgcc/config/microblaze/crtn.S -index cd5fd9e..04e73d7 100644 ---- a/libgcc/config/microblaze/crtn.S -+++ b/libgcc/config/microblaze/crtn.S -@@ -33,9 +33,9 @@ - .section .init, "ax" - lw r15, r0, r1 - rtsd r15, 8 -- addik r1, r1, 8 -+ addik r1, r1, 16 - - .section .fini, "ax" - lw r15, r0, r1 - rtsd r15, 8 -- addik r1, r1, 8 -+ addik r1, r1, 16 -diff --git a/libgcc/config/microblaze/divdi3.S b/libgcc/config/microblaze/divdi3.S -new file mode 100644 -index 0000000..d37bf51 ---- /dev/null -+++ b/libgcc/config/microblaze/divdi3.S -@@ -0,0 +1,98 @@ -+###################################- -+# -+# Copyright (C) 2009-2017 Free Software Foundation, Inc. -+# -+# Contributed by Michael Eager <eager@eagercon.com>. -+# -+# This file is free software; you can redistribute it and/or modify it -+# under the terms of the GNU General Public License as published by the -+# Free Software Foundation; either version 3, or (at your option) any -+# later version. -+# -+# GCC is distributed in the hope that it will be useful, but WITHOUT -+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY -+# or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public -+# License for more details. -+# -+# Under Section 7 of GPL version 3, you are granted additional -+# permissions described in the GCC Runtime Library Exception, version -+# 3.1, as published by the Free Software Foundation. -+# -+# You should have received a copy of the GNU General Public License and -+# a copy of the GCC Runtime Library Exception along with this program; -+# see the files COPYING3 and COPYING.RUNTIME respectively. If not, see -+# <http://www.gnu.org/licenses/>. -+# -+# divdi3.S -+# -+# Divide operation for 32 bit integers. -+# Input : Dividend in Reg r5 -+# Divisor in Reg r6 -+# Output: Result in Reg r3 -+# -+####################################### -+ -+#ifdef __arch64__ -+ .globl __divdi3 -+ .ent __divdi3 -+ .type __divdi3,@function -+__divdi3: -+ .frame r1,0,r15 -+ -+ ADDLIK r1,r1,-32 -+ SLI r28,r1,0 -+ SLI r29,r1,8 -+ SLI r30,r1,16 -+ SLI r31,r1,24 -+ -+ BEALEQI r6,$LaDiv_By_Zero # Div_by_Zero # Division Error -+ BEALEQI r5,$LaResult_Is_Zero # Result is Zero -+ XORL r28,r5,r6 # Get the sign of the result -+ BEALGEI r5,$LaR5_Pos -+ RSUBLI r5,r5,0 # Make r5 positive -+$LaR5_Pos: -+ BEALGEI r6,$LaR6_Pos -+ RSUBLI r6,r6,0 # Make r6 positive -+$LaR6_Pos: -+ ADDLIK r30,r0,0 # Clear mod -+ ADDLIK r3,r0,0 # clear div -+ ADDLIK r29,r0,64 # Initialize the loop count -+ -+ # First part try to find the first '1' in the r5 -+$LaDIV0: -+ BEALLTI r5,$LaDIV2 # This traps r5 == 0x80000000 -+$LaDIV1: -+ ADDL r5,r5,r5 # left shift logical r5 -+ ADDLIK r29,r29,-1 -+ BEALGTI r5,$LaDIV1 -+$LaDIV2: -+ ADDL r5,r5,r5 # left shift logical r5 get the '1' into the Carry -+ ADDLC r30,r30,r30 # Move that bit into the Mod register -+ RSUBL r31,r6,r30 # Try to subtract (r30 a r6) -+ BEALLTI r31,$LaMOD_TOO_SMALL -+ ORL r30,r0,r31 # Move the r31 to mod since the result was positive -+ ADDLIK r3,r3,1 -+$LaMOD_TOO_SMALL: -+ ADDLIK r29,r29,-1 -+ BEALEQi r29,$LaLOOP_END -+ ADDL r3,r3,r3 # Shift in the '1' into div -+ BREAI $LaDIV2 # Div2 -+$LaLOOP_END: -+ BEALGEI r28,$LaRETURN_HERE -+ RSUBLI r3,r3,0 # Negate the result -+ BREAI $LaRETURN_HERE -+$LaDiv_By_Zero: -+$LaResult_Is_Zero: -+ ORL r3,r0,r0 # set result to 0 -+$LaRETURN_HERE: -+# Restore values of CSRs and that of r3 and the divisor and the dividend -+ LLI r28,r1,0 -+ LLI r29,r1,8 -+ LLI r30,r1,16 -+ LLI r31,r1,24 -+ ADDLIK r1,r1,32 -+ RTSD r15,8 -+ nop -+.end __divdi3 -+ .size __divdi3, . - __divdi3 -+#endif -diff --git a/libgcc/config/microblaze/divdi3_table.c b/libgcc/config/microblaze/divdi3_table.c -new file mode 100644 -index 0000000..8096259 ---- /dev/null -+++ b/libgcc/config/microblaze/divdi3_table.c -@@ -0,0 +1,62 @@ -+/* Table for software lookup divide for Xilinx MicroBlaze. -+ -+ Copyright (C) 2009-2017 Free Software Foundation, Inc. -+ -+ Contributed by Michael Eager <eager@eagercon.com>. -+ -+ This file is free software; you can redistribute it and/or modify it -+ under the terms of the GNU General Public License as published by the -+ Free Software Foundation; either version 3, or (at your option) any -+ later version. -+ -+ GCC is distributed in the hope that it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY -+ or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public -+ License for more details. -+ -+ Under Section 7 of GPL version 3, you are granted additional -+ permissions described in the GCC Runtime Library Exception, version -+ 3.1, as published by the Free Software Foundation. -+ -+ You should have received a copy of the GNU General Public License and -+ a copy of the GCC Runtime Library Exception along with this program; -+ see the files COPYING3 and COPYING.RUNTIME respectively. If not, see -+ <http://www.gnu.org/licenses/>. */ -+ -+ -+unsigned char _divdi3_table[] = -+{ -+ 0, 0/1, 0/2, 0/3, 0/4, 0/5, 0/6, 0/7, -+ 0/8, 0/9, 0/10, 0/11, 0/12, 0/13, 0/14, 0/15, -+ 0, 1/1, 1/2, 1/3, 1/4, 1/5, 1/6, 1/7, -+ 1/8, 1/9, 1/10, 1/11, 1/12, 1/13, 1/14, 1/15, -+ 0, 2/1, 2/2, 2/3, 2/4, 2/5, 2/6, 2/7, -+ 2/8, 2/9, 2/10, 2/11, 2/12, 2/13, 2/14, 2/15, -+ 0, 3/1, 3/2, 3/3, 3/4, 3/5, 3/6, 3/7, -+ 3/8, 3/9, 3/10, 3/11, 3/12, 3/13, 3/14, 3/15, -+ 0, 4/1, 4/2, 4/3, 4/4, 4/5, 4/6, 4/7, -+ 4/8, 4/9, 4/10, 4/11, 4/12, 4/13, 4/14, 4/15, -+ 0, 5/1, 5/2, 5/3, 5/4, 5/5, 5/6, 5/7, -+ 5/8, 5/9, 5/10, 5/11, 5/12, 5/13, 5/14, 5/15, -+ 0, 6/1, 6/2, 6/3, 6/4, 6/5, 6/6, 6/7, -+ 6/8, 6/9, 6/10, 6/11, 6/12, 6/13, 6/14, 6/15, -+ 0, 7/1, 7/2, 7/3, 7/4, 7/5, 7/6, 7/7, -+ 7/8, 7/9, 7/10, 7/11, 7/12, 7/13, 7/14, 7/15, -+ 0, 8/1, 8/2, 8/3, 8/4, 8/5, 8/6, 8/7, -+ 8/8, 8/9, 8/10, 8/11, 8/12, 8/13, 8/14, 8/15, -+ 0, 9/1, 9/2, 9/3, 9/4, 9/5, 9/6, 9/7, -+ 9/8, 9/9, 9/10, 9/11, 9/12, 9/13, 9/14, 9/15, -+ 0, 10/1, 10/2, 10/3, 10/4, 10/5, 10/6, 10/7, -+ 10/8, 10/9, 10/10, 10/11, 10/12, 10/13, 10/14, 10/15, -+ 0, 11/1, 11/2, 11/3, 11/4, 11/5, 11/6, 11/7, -+ 11/8, 11/9, 11/10, 11/11, 11/12, 11/13, 11/14, 11/15, -+ 0, 12/1, 12/2, 12/3, 12/4, 12/5, 12/6, 12/7, -+ 12/8, 12/9, 12/10, 12/11, 12/12, 12/13, 12/14, 12/15, -+ 0, 13/1, 13/2, 13/3, 13/4, 13/5, 13/6, 13/7, -+ 13/8, 13/9, 13/10, 13/11, 13/12, 13/13, 13/14, 13/15, -+ 0, 14/1, 14/2, 14/3, 14/4, 14/5, 14/6, 14/7, -+ 14/8, 14/9, 14/10, 14/11, 14/12, 14/13, 14/14, 14/15, -+ 0, 15/1, 15/2, 15/3, 15/4, 15/5, 15/6, 15/7, -+ 15/8, 15/9, 15/10, 15/11, 15/12, 15/13, 15/14, 15/15, -+}; -+ -diff --git a/libgcc/config/microblaze/moddi3.S b/libgcc/config/microblaze/moddi3.S -new file mode 100644 -index 0000000..5d3f7c0 ---- /dev/null -+++ b/libgcc/config/microblaze/moddi3.S -@@ -0,0 +1,97 @@ -+################################### -+# -+# Copyright (C) 2009-2017 Free Software Foundation, Inc. -+# -+# Contributed by Michael Eager <eager@eagercon.com>. -+# -+# This file is free software; you can redistribute it and/or modify it -+# under the terms of the GNU General Public License as published by the -+# Free Software Foundation; either version 3, or (at your option) any -+# later version. -+# -+# GCC is distributed in the hope that it will be useful, but WITHOUT -+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY -+# or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public -+# License for more details. -+# -+# Under Section 7 of GPL version 3, you are granted additional -+# permissions described in the GCC Runtime Library Exception, version -+# 3.1, as published by the Free Software Foundation. -+# -+# You should have received a copy of the GNU General Public License and -+# a copy of the GCC Runtime Library Exception along with this program; -+# see the files COPYING3 and COPYING.RUNTIME respectively. If not, see -+# <http://www.gnu.org/licenses/>. -+# -+# moddi3.S -+# -+# modulo operation for 32 bit integers. -+# Input : op1 in Reg r5 -+# op2 in Reg r6 -+# Output: op1 mod op2 in Reg r3 -+# -+####################################### -+ -+#ifdef __arch64__ -+ .globl __moddi3 -+ .ent __moddi3 -+ .type __moddi3,@function -+__moddi3: -+ .frame r1,0,r15 -+ -+ addlik r1,r1,-32 -+ sli r28,r1,0 -+ sli r29,r1,8 -+ sli r30,r1,16 -+ sli r31,r1,32 -+ -+ BEALEQI r6,$LaDiv_By_Zero # Div_by_Zero # Division Error -+ BEALEQI r5,$LaResult_Is_Zero # Result is Zero -+ ADDL r28,r5,r0 # Get the sign of the result [ Depends only on the first arg] -+ BEALGEI r5,$LaR5_Pos -+ RSUBLI r5,r5,0 # Make r5 positive -+$LaR5_Pos: -+ BEALGEI r6,$LaR6_Pos -+ RSUBLI r6,r6,0 # Make r6 positive -+$LaR6_Pos: -+ ADDLIK r3,r0,0 # Clear mod -+ ADDLIK r30,r0,0 # clear div -+ ADDLIK r29,r0,64 # Initialize the loop count -+ BEALLTI r5,$LaDIV2 # If r5 is still negative (0x80000000), skip -+ # the first bit search. -+ # First part try to find the first '1' in the r5 -+$LaDIV1: -+ ADDL r5,r5,r5 # left shift logical r5 -+ ADDLIK r29,r29,-1 -+ BEALGEI r5,$LaDIV1 # -+$LaDIV2: -+ ADDL r5,r5,r5 # left shift logical r5 get the '1' into the Carry -+ ADDLC r3,r3,r3 # Move that bit into the Mod register -+ rSUBL r31,r6,r3 # Try to subtract (r30 a r6) -+ BEALLTi r31,$LaMOD_TOO_SMALL -+ ORL r3,r0,r31 # Move the r31 to mod since the result was positive -+ ADDLIK r30,r30,1 -+$LaMOD_TOO_SMALL: -+ ADDLIK r29,r29,-1 -+ BEALEQi r29,$LaLOOP_END -+ ADDL r30,r30,r30 # Shift in the '1' into div -+ BREAI $LaDIV2 # Div2 -+$LaLOOP_END: -+ BEALGEI r28,$LaRETURN_HERE -+ rsubli r3,r3,0 # Negate the result -+ BREAI $LaRETURN_HERE -+$LaDiv_By_Zero: -+$LaResult_Is_Zero: -+ orl r3,r0,r0 # set result to 0 [Both mod as well as div are 0] -+$LaRETURN_HERE: -+# Restore values of CSRs and that of r3 and the divisor and the dividend -+ lli r28,r1,0 -+ lli r29,r1,8 -+ lli r30,r1,16 -+ lli r31,r1,24 -+ addlik r1,r1,32 -+ rtsd r15,8 -+ nop -+ .end __moddi3 -+ .size __moddi3, . - __moddi3 -+#endif -diff --git a/libgcc/config/microblaze/muldi3.S b/libgcc/config/microblaze/muldi3.S -new file mode 100644 -index 0000000..5677841 ---- /dev/null -+++ b/libgcc/config/microblaze/muldi3.S -@@ -0,0 +1,73 @@ -+/*###################################-*-asm*- -+# -+# Copyright (C) 2009-2017 Free Software Foundation, Inc. -+# -+# Contributed by Michael Eager <eager@eagercon.com>. -+# -+# This file is free software; you can redistribute it and/or modify it -+# under the terms of the GNU General Public License as published by the -+# Free Software Foundation; either version 3, or (at your option) any -+# later version. -+# -+# GCC is distributed in the hope that it will be useful, but WITHOUT -+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY -+# or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public -+# License for more details. -+# -+# Under Section 7 of GPL version 3, you are granted additional -+# permissions described in the GCC Runtime Library Exception, version -+# 3.1, as published by the Free Software Foundation. -+# -+# You should have received a copy of the GNU General Public License and -+# a copy of the GCC Runtime Library Exception along with this program; -+# see the files COPYING3 and COPYING.RUNTIME respectively. If not, see -+# <http://www.gnu.org/licenses/>. -+# -+# muldi3.S -+# -+# Multiply operation for 32 bit integers. -+# Input : Operand1 in Reg r5 -+# Operand2 in Reg r6 -+# Output: Result [op1 * op2] in Reg r3 -+# -+#######################################*/ -+ -+#ifdef __arch64__ -+ .globl __muldi3 -+ .ent __muldi3 -+ .type __muldi3,@function -+__muldi3: -+ .frame r1,0,r15 -+ addl r3,r0,r0 -+ BEALEQI r5,$L_Result_Is_Zero # Multiply by Zero -+ BEALEQI r6,$L_Result_Is_Zero # Multiply by Zero -+ XORL r4,r5,r6 # Get the sign of the result -+ BEALGEI r5,$L_R5_Pos -+ RSUBLI r5,r5,0 # Make r5 positive -+$L_R5_Pos: -+ BEALGEI r6,$L_R6_Pos -+ RSUBLI r6,r6,0 # Make r6 positive -+$L_R6_Pos: -+ breai $L1 -+$L2: -+ addl r5,r5,r5 -+$L1: -+ srll r6,r6 -+ addlc r7,r0,r0 -+ bealeqi r7,$L2 -+ addl r3,r3,r5 -+ bealnei r6,$L2 -+ beallti r4,$L_NegateResult -+ rtsd r15,8 -+ nop -+$L_NegateResult: -+ rsubl r3,r3,r0 -+ rtsd r15,8 -+ nop -+$L_Result_Is_Zero: -+ addli r3,r0,0 -+ rtsd r15,8 -+ nop -+ .end __muldi3 -+ .size __muldi3, . - __muldi3 -+#endif -diff --git a/libgcc/config/microblaze/t-microblaze b/libgcc/config/microblaze/t-microblaze -index 8d954a4..35021b2 100644 ---- a/libgcc/config/microblaze/t-microblaze -+++ b/libgcc/config/microblaze/t-microblaze -@@ -1,11 +1,16 @@ --LIB2FUNCS_EXCLUDE += _divsi3 _modsi3 _mulsi3 _udivsi3 _umodsi3 -+LIB2FUNCS_EXCLUDE += _divsi3 _modsi3 _mulsi3 _udivsi3 _umodsi3 \ -+ _divdi3 _moddi3 _muldi3 _udivdi3 _umoddi3 - - LIB2ADD += \ - $(srcdir)/config/microblaze/divsi3.S \ -+ $(srcdir)/config/microblaze/divdi3.S \ - $(srcdir)/config/microblaze/modsi3.S \ -- $(srcdir)/config/microblaze/muldi3_hard.S \ -+ $(srcdir)/config/microblaze/moddi3.S \ - $(srcdir)/config/microblaze/mulsi3.S \ -+ $(srcdir)/config/microblaze/muldi3.S \ - $(srcdir)/config/microblaze/stack_overflow_exit.S \ - $(srcdir)/config/microblaze/udivsi3.S \ -+ $(srcdir)/config/microblaze/udivdi3.S \ - $(srcdir)/config/microblaze/umodsi3.S \ -- $(srcdir)/config/microblaze/divsi3_table.c -+ $(srcdir)/config/microblaze/umoddi3.S \ -+ $(srcdir)/config/microblaze/divsi3_table.c \ -diff --git a/libgcc/config/microblaze/udivdi3.S b/libgcc/config/microblaze/udivdi3.S -new file mode 100644 -index 0000000..c210fbc ---- /dev/null -+++ b/libgcc/config/microblaze/udivdi3.S -@@ -0,0 +1,107 @@ -+###################################- -+# -+# Copyright (C) 2009-2017 Free Software Foundation, Inc. -+# -+# Contributed by Michael Eager <eager@eagercon.com>. -+# -+# This file is free software; you can redistribute it and/or modify it -+# under the terms of the GNU General Public License as published by the -+# Free Software Foundation; either version 3, or (at your option) any -+# later version. -+# -+# GCC is distributed in the hope that it will be useful, but WITHOUT -+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY -+# or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public -+# License for more details. -+# -+# Under Section 7 of GPL version 3, you are granted additional -+# permissions described in the GCC Runtime Library Exception, version -+# 3.1, as published by the Free Software Foundation. -+# -+# You should have received a copy of the GNU General Public License and -+# a copy of the GCC Runtime Library Exception along with this program; -+# see the files COPYING3 and COPYING.RUNTIME respectively. If not, see -+# <http://www.gnu.org/licenses/>. -+# -+# udivdi3.S -+# -+# Unsigned divide operation. -+# Input : Divisor in Reg r5 -+# Dividend in Reg r6 -+# Output: Result in Reg r3 -+# -+####################################### -+ -+#ifdef __arch64__ -+ .globl __udivdi3 -+ .ent __udivdi3 -+ .type __udivdi3,@function -+__udivdi3: -+ .frame r1,0,r15 -+ -+ ADDlIK r1,r1,-24 -+ SLI r29,r1,0 -+ SLI r30,r1,8 -+ SLI r31,r1,16 -+ -+ BEALEQI r6,$LaDiv_By_Zero # Div_by_Zero # Division Error -+ ADDLIK r30,r0,0 # Clear mod -+ BEALEQI r5,$LaResult_Is_Zero # Result is Zero -+ ADDLIK r29,r0,64 # Initialize the loop count -+ -+ # Check if r6 and r5 are equal # if yes, return 1 -+ RSUBL r18,r5,r6 -+ ADDLIK r3,r0,1 -+ BEALEQI r18,$LaRETURN_HERE -+ -+ # Check if (uns)r6 is greater than (uns)r5. In that case, just return 0 -+ XORL r18,r5,r6 -+ ADDL r3,r0,r0 # We would anyways clear r3 -+ BEALGEI r18,$LRSUBL -+ BEALLTI r6,$LaRETURN_HERE # r6[bit 31 = 1] hence is greater -+ BREAI $LCheckr6 -+$LRSUBL: -+ RSUBL r18,r6,r5 # MICROBLAZEcmp -+ BEALLTI r18,$LaRETURN_HERE -+ -+ # If r6 [bit 31] is set, then return result as 1 -+$LCheckr6: -+ BEALGTI r6,$LaDIV0 -+ ADDLIK r3,r0,1 -+ BREAI $LaRETURN_HERE -+ -+ # First part try to find the first '1' in the r5 -+$LaDIV0: -+ BEALLTI r5,$LaDIV2 -+$LaDIV1: -+ ADDL r5,r5,r5 # left shift logical r5 -+ ADDLIK r29,r29,-1 -+ BEALGTI r5,$LaDIV1 -+$LaDIV2: -+ ADDL r5,r5,r5 # left shift logical r5 get the '1' into the Carry -+ ADDLC r30,r30,r30 # Move that bit into the Mod register -+ RSUBL r31,r6,r30 # Try to subtract (r30 a r6) -+ BEALLTI r31,$LaMOD_TOO_SMALL -+ ORL r30,r0,r31 # Move the r31 to mod since the result was positive -+ ADDLIK r3,r3,1 -+$LaMOD_TOO_SMALL: -+ ADDLIK r29,r29,-1 -+ BEALEQi r29,$LaLOOP_END -+ ADDL r3,r3,r3 # Shift in the '1' into div -+ BREAI $LaDIV2 # Div2 -+$LaLOOP_END: -+ BREAI $LaRETURN_HERE -+$LaDiv_By_Zero: -+$LaResult_Is_Zero: -+ ORL r3,r0,r0 # set result to 0 -+$LaRETURN_HERE: -+ # Restore values of CSRs and that of r3 and the divisor and the dividend -+ LLI r29,r1,0 -+ LLI r30,r1,8 -+ LLI r31,r1,16 -+ ADDLIK r1,r1,24 -+ RTSD r15,8 -+ NOP -+ .end __udivdi3 -+ .size __udivdi3, . - __udivdi3 -+#endif -diff --git a/libgcc/config/microblaze/umoddi3.S b/libgcc/config/microblaze/umoddi3.S -new file mode 100644 -index 0000000..7f5cd23 ---- /dev/null -+++ b/libgcc/config/microblaze/umoddi3.S -@@ -0,0 +1,110 @@ -+################################### -+# -+# Copyright (C) 2009-2017 Free Software Foundation, Inc. -+# -+# Contributed by Michael Eager <eager@eagercon.com>. -+# -+# This file is free software; you can redistribute it and/or modify it -+# under the terms of the GNU General Public License as published by the -+# Free Software Foundation; either version 3, or (at your option) any -+# later version. -+# -+# GCC is distributed in the hope that it will be useful, but WITHOUT -+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY -+# or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public -+# License for more details. -+# -+# Under Section 7 of GPL version 3, you are granted additional -+# permissions described in the GCC Runtime Library Exception, version -+# 3.1, as published by the Free Software Foundation. -+# -+# You should have received a copy of the GNU General Public License and -+# a copy of the GCC Runtime Library Exception along with this program; -+# see the files COPYING3 and COPYING.RUNTIME respectively. If not, see -+# <http://www.gnu.org/licenses/>. -+# -+# umoddi3.S -+# -+# Unsigned modulo operation for 32 bit integers. -+# Input : op1 in Reg r5 -+# op2 in Reg r6 -+# Output: op1 mod op2 in Reg r3 -+# -+####################################### -+ -+#ifdef __arch64__ -+ .globl __umoddi3 -+ .ent __umoddi3 -+ .type __umoddi3,@function -+__umoddi3: -+ .frame r1,0,r15 -+ -+ addlik r1,r1,-24 -+ sli r29,r1,0 -+ sli r30,r1,8 -+ sli r31,r1,16 -+ -+ BEALEQI r6,$LaDiv_By_Zero # Div_by_Zero # Division Error -+ ADDLIK r3,r0,0 # Clear div -+ BEALEQI r5,$LaResult_Is_Zero # Result is Zero -+ ADDLIK r30,r0,0 # clear mod -+ ADDLIK r29,r0,64 # Initialize the loop count -+ -+# Check if r6 and r5 are equal # if yes, return 0 -+ rsubl r18,r5,r6 -+ bealeqi r18,$LaRETURN_HERE -+ -+# Check if (uns)r6 is greater than (uns)r5. In that case, just return r5 -+ xorl r18,r5,r6 -+ addlik r3,r5,0 -+ bealgei r18,$LRSUB -+ beallti r6,$LaRETURN_HERE -+ breai $LCheckr6 -+$LRSUB: -+ rsubl r18,r5,r6 # MICROBLAZEcmp -+ bealgti r18,$LaRETURN_HERE -+ -+# If r6 [bit 31] is set, then return result as r5-r6 -+$LCheckr6: -+ addlik r3,r0,0 -+ bealgti r6,$LaDIV0 -+ addlik r18,r0,0x7fffffff -+ andl r5,r5,r18 -+ andl r6,r6,r18 -+ breaid $LaRETURN_HERE -+ rsubl r3,r6,r5 -+# First part: try to find the first '1' in the r5 -+$LaDIV0: -+ BEALLTI r5,$LaDIV2 -+$LaDIV1: -+ ADDL r5,r5,r5 # left shift logical r5 -+ ADDLIK r29,r29,-1 -+ BEALGEI r5,$LaDIV1 # -+$LaDIV2: -+ ADDL r5,r5,r5 # left shift logical r5 get the '1' into the Carry -+ ADDLC r3,r3,r3 # Move that bit into the Mod register -+ rSUBL r31,r6,r3 # Try to subtract (r3 a r6) -+ BEALLTi r31,$LaMOD_TOO_SMALL -+ ORL r3,r0,r31 # Move the r31 to mod since the result was positive -+ ADDLIK r30,r30,1 -+$LaMOD_TOO_SMALL: -+ ADDLIK r29,r29,-1 -+ BEALEQi r29,$LaLOOP_END -+ ADDL r30,r30,r30 # Shift in the '1' into div -+ BREAI $LaDIV2 # Div2 -+$LaLOOP_END: -+ BREAI $LaRETURN_HERE -+$LaDiv_By_Zero: -+$LaResult_Is_Zero: -+ orl r3,r0,r0 # set result to 0 -+$LaRETURN_HERE: -+# Restore values of CSRs and that of r3 and the divisor and the dividend -+ lli r29,r1,0 -+ lli r30,r1,8 -+ lli r31,r1,16 -+ addlik r1,r1,24 -+ rtsd r15,8 -+ nop -+.end __umoddi3 -+ .size __umoddi3, . - __umoddi3 -+#endif --- -2.7.4 - diff --git a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0042-re-arrangement-of-the-compare-branches.patch b/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0042-re-arrangement-of-the-compare-branches.patch deleted file mode 100644 index c33b247b..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0042-re-arrangement-of-the-compare-branches.patch +++ /dev/null @@ -1,268 +0,0 @@ -From 9e45ca7bd65fe327e01e93d3c539c9d8cf049b79 Mon Sep 17 00:00:00 2001 -From: Nagaraju Mekala <nmekala@xilix.com> -Date: Fri, 3 Aug 2018 15:41:39 +0530 -Subject: [PATCH 42/54] re-arrangement of the compare branches - ---- - gcc/config/microblaze/microblaze.c | 28 ++----- - gcc/config/microblaze/microblaze.md | 141 +++++++++++++++++------------------- - 2 files changed, 73 insertions(+), 96 deletions(-) - -diff --git a/gcc/config/microblaze/microblaze.c b/gcc/config/microblaze/microblaze.c -index ba7ade4..fab79d9 100644 ---- a/gcc/config/microblaze/microblaze.c -+++ b/gcc/config/microblaze/microblaze.c -@@ -3695,11 +3695,7 @@ microblaze_expand_conditional_branch (machine_mode mode, rtx operands[]) - { - comp_reg = cmp_op0; - condition = gen_rtx_fmt_ee (signed_condition (code), mode, comp_reg, const0_rtx); -- if (mode == Pmode) -- emit_jump_insn (gen_condjump (condition, label1)); -- else -- emit_jump_insn (gen_long_condjump (condition, label1)); -- -+ emit_jump_insn (gen_condjump (condition, label1)); - } - - else if (code == EQ || code == NE) -@@ -3710,10 +3706,7 @@ microblaze_expand_conditional_branch (machine_mode mode, rtx operands[]) - else - emit_insn (gen_xordi3 (comp_reg, cmp_op0, cmp_op1)); - condition = gen_rtx_fmt_ee (signed_condition (code), mode, comp_reg, const0_rtx); -- if (mode == SImode) -- emit_jump_insn (gen_condjump (condition, label1)); -- else -- emit_jump_insn (gen_long_condjump (condition, label1)); -+ emit_jump_insn (gen_condjump (condition, label1)); - } - else - { -@@ -3746,10 +3739,7 @@ microblaze_expand_conditional_branch_reg (machine_mode mode, rtx operands[]) - comp_reg = cmp_op0; - condition = gen_rtx_fmt_ee (signed_condition (code), - mode, comp_reg, const0_rtx); -- if (mode == SImode) -- emit_jump_insn (gen_condjump (condition, label1)); -- else -- emit_jump_insn (gen_long_condjump (condition, label1)); -+ emit_jump_insn (gen_condjump (condition, label1)); - } - else if (code == EQ) - { -@@ -3764,10 +3754,7 @@ microblaze_expand_conditional_branch_reg (machine_mode mode, rtx operands[]) - cmp_op1)); - } - condition = gen_rtx_EQ (mode, comp_reg, const0_rtx); -- if (mode == SImode) -- emit_jump_insn (gen_condjump (condition, label1)); -- else -- emit_jump_insn (gen_long_condjump (condition, label1)); -+ emit_jump_insn (gen_condjump (condition, label1)); - - } - else if (code == NE) -@@ -3783,10 +3770,7 @@ microblaze_expand_conditional_branch_reg (machine_mode mode, rtx operands[]) - cmp_op1)); - } - condition = gen_rtx_NE (mode, comp_reg, const0_rtx); -- if (mode == SImode) -- emit_jump_insn (gen_condjump (condition, label1)); -- else -- emit_jump_insn (gen_long_condjump (condition, label1)); -+ emit_jump_insn (gen_condjump (condition, label1)); - } - else - { -@@ -3828,7 +3812,7 @@ microblaze_expand_conditional_branch_df (rtx operands[]) - - emit_insn (gen_cstoredf4 (comp_reg, operands[0], cmp_op0, cmp_op1)); - condition = gen_rtx_NE (Pmode, comp_reg, const0_rtx); -- emit_jump_insn (gen_long_condjump (condition, operands[3])); -+ emit_jump_insn (gen_condjump (condition, operands[3])); - } - - /* Implement TARGET_FRAME_POINTER_REQUIRED. */ -diff --git a/gcc/config/microblaze/microblaze.md b/gcc/config/microblaze/microblaze.md -index 0f41ac6..2213d6e 100644 ---- a/gcc/config/microblaze/microblaze.md -+++ b/gcc/config/microblaze/microblaze.md -@@ -2268,7 +2268,27 @@ else - (label_ref (match_operand 1)) - (pc)))]) - --(define_insn "branch_zero64" -+(define_insn "branch_zero_64" -+ [(set (pc) -+ (if_then_else (match_operator:SI 0 "ordered_comparison_operator" -+ [(match_operand:SI 1 "register_operand" "d") -+ (const_int 0)]) -+ (match_operand:SI 2 "pc_or_label_operand" "") -+ (match_operand:SI 3 "pc_or_label_operand" ""))) -+ ] -+ "TARGET_MB_64" -+ { -+ if (operands[3] == pc_rtx) -+ return "bea%C0i%?\t%z1,%2"; -+ else -+ return "bea%N0i%?\t%z1,%3"; -+ } -+ [(set_attr "type" "branch") -+ (set_attr "mode" "none") -+ (set_attr "length" "4")] -+) -+ -+(define_insn "long_branch_zero" - [(set (pc) - (if_then_else (match_operator 0 "ordered_comparison_operator" - [(match_operand 1 "register_operand" "d") -@@ -2279,9 +2299,9 @@ else - "TARGET_MB_64" - { - if (operands[3] == pc_rtx) -- return "bea%C0i%?\t%z1,%2"; -+ return "beal%C0i%?\t%z1,%2"; - else -- return "bea%N0i%?\t%z1,%3"; -+ return "beal%N0i%?\t%z1,%3"; - } - [(set_attr "type" "branch") - (set_attr "mode" "none") -@@ -2310,9 +2330,9 @@ else - - (define_insn "branch_compare64" - [(set (pc) -- (if_then_else (match_operator 0 "cmp_op" -- [(match_operand 1 "register_operand" "d") -- (match_operand 2 "register_operand" "d") -+ (if_then_else (match_operator:SI 0 "cmp_op" -+ [(match_operand:SI 1 "register_operand" "d") -+ (match_operand:SI 2 "register_operand" "d") - ]) - (label_ref (match_operand 3)) - (pc))) -@@ -2349,6 +2369,47 @@ else - (set_attr "length" "12")] - ) - -+(define_insn "long_branch_compare" -+ [(set (pc) -+ (if_then_else (match_operator 0 "cmp_op" -+ [(match_operand 1 "register_operand" "d") -+ (match_operand 2 "register_operand" "d") -+ ]) -+ (label_ref (match_operand 3)) -+ (pc))) -+ (clobber(reg:DI R_TMP))] -+ "TARGET_MB_64" -+ { -+ operands[4] = gen_rtx_REG (DImode, MB_ABI_ASM_TEMP_REGNUM); -+ enum rtx_code code = GET_CODE (operands[0]); -+ -+ if (code == GT || code == LE) -+ { -+ output_asm_insn ("cmpl\tr18,%z1,%z2", operands); -+ code = swap_condition (code); -+ } -+ else if (code == GTU || code == LEU) -+ { -+ output_asm_insn ("cmplu\tr18,%z1,%z2", operands); -+ code = swap_condition (code); -+ } -+ else if (code == GE || code == LT) -+ { -+ output_asm_insn ("cmpl\tr18,%z2,%z1", operands); -+ } -+ else if (code == GEU || code == LTU) -+ { -+ output_asm_insn ("cmplu\tr18,%z2,%z1", operands); -+ } -+ -+ operands[0] = gen_rtx_fmt_ee (signed_condition (code), DImode, operands[4], const0_rtx); -+ return "beal%C0i%?\tr18,%3"; -+ } -+ [(set_attr "type" "branch") -+ (set_attr "mode" "none") -+ (set_attr "length" "12")] -+) -+ - (define_insn "branch_compare" - [(set (pc) - (if_then_else (match_operator:SI 0 "cmp_op" -@@ -2431,74 +2492,6 @@ else - - }) - --;; Used to implement comparison instructions --(define_expand "long_condjump" -- [(set (pc) -- (if_then_else (match_operand 0) -- (label_ref (match_operand 1)) -- (pc)))]) -- --(define_insn "long_branch_zero" -- [(set (pc) -- (if_then_else (match_operator:DI 0 "ordered_comparison_operator" -- [(match_operand:DI 1 "register_operand" "d") -- (const_int 0)]) -- (match_operand:DI 2 "pc_or_label_operand" "") -- (match_operand:DI 3 "pc_or_label_operand" ""))) -- ] -- "TARGET_MB_64" -- { -- if (operands[3] == pc_rtx) -- return "beal%C0i%?\t%z1,%2"; -- else -- return "beal%N0i%?\t%z1,%3"; -- } -- [(set_attr "type" "branch") -- (set_attr "mode" "none") -- (set_attr "length" "4")] --) -- --(define_insn "long_branch_compare" -- [(set (pc) -- (if_then_else (match_operator:DI 0 "cmp_op" -- [(match_operand:DI 1 "register_operand" "d") -- (match_operand:DI 2 "register_operand" "d") -- ]) -- (label_ref (match_operand 3)) -- (pc))) -- (clobber(reg:DI R_TMP))] -- "TARGET_MB_64" -- { -- operands[4] = gen_rtx_REG (DImode, MB_ABI_ASM_TEMP_REGNUM); -- enum rtx_code code = GET_CODE (operands[0]); -- -- if (code == GT || code == LE) -- { -- output_asm_insn ("cmpl\tr18,%z1,%z2", operands); -- code = swap_condition (code); -- } -- else if (code == GTU || code == LEU) -- { -- output_asm_insn ("cmplu\tr18,%z1,%z2", operands); -- code = swap_condition (code); -- } -- else if (code == GE || code == LT) -- { -- output_asm_insn ("cmpl\tr18,%z2,%z1", operands); -- } -- else if (code == GEU || code == LTU) -- { -- output_asm_insn ("cmplu\tr18,%z2,%z1", operands); -- } -- -- operands[0] = gen_rtx_fmt_ee (signed_condition (code), DImode, operands[4], const0_rtx); -- return "beal%C0i%?\tr18,%3"; -- } -- [(set_attr "type" "branch") -- (set_attr "mode" "none") -- (set_attr "length" "12")] --) -- - ;;---------------------------------------------------------------- - ;; Unconditional branches - ;;---------------------------------------------------------------- --- -2.7.4 - diff --git a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0043-Patch-Microblaze-previous-commit-broke-the-handling-.patch b/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0043-Patch-Microblaze-previous-commit-broke-the-handling-.patch deleted file mode 100644 index d1cf4579..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0043-Patch-Microblaze-previous-commit-broke-the-handling-.patch +++ /dev/null @@ -1,28 +0,0 @@ -From 0c132e74714d217108d65fca630ab497a0d8821a Mon Sep 17 00:00:00 2001 -From: Mahesh Bodapati <mbodapat@xilinx.com> -Date: Wed, 8 Aug 2018 17:37:26 +0530 -Subject: [PATCH 43/54] [Patch,Microblaze] : previous commit broke the - handling of SI Branch compare for Microblaze 32-bit.. - ---- - gcc/config/microblaze/microblaze.md | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -diff --git a/gcc/config/microblaze/microblaze.md b/gcc/config/microblaze/microblaze.md -index 2213d6e..53ea401 100644 ---- a/gcc/config/microblaze/microblaze.md -+++ b/gcc/config/microblaze/microblaze.md -@@ -2224,8 +2224,8 @@ else - (define_expand "cbranchsi4" - [(set (pc) - (if_then_else (match_operator 0 "ordered_comparison_operator" -- [(match_operand 1 "register_operand") -- (match_operand 2 "arith_operand" "I,i")]) -+ [(match_operand:SI 1 "register_operand") -+ (match_operand:SI 2 "arith_operand" "I,i")]) - (label_ref (match_operand 3 "")) - (pc)))] - "" --- -2.7.4 - diff --git a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0044-Patch-Microblaze-Support-of-multilibs-with-m64.patch b/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0044-Patch-Microblaze-Support-of-multilibs-with-m64.patch deleted file mode 100644 index 68791cb2..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0044-Patch-Microblaze-Support-of-multilibs-with-m64.patch +++ /dev/null @@ -1,73 +0,0 @@ -From 259ed1ee33625964f5bc394ae660103b6c35510f Mon Sep 17 00:00:00 2001 -From: Mahesh Bodapati <mbodapat@xilinx.com> -Date: Tue, 11 Sep 2018 13:43:48 +0530 -Subject: [PATCH 44/54] [Patch, Microblaze] : Support of multilibs with m64 ... - ---- - gcc/config/microblaze/microblaze-c.c | 1 + - gcc/config/microblaze/t-microblaze | 15 ++++++--------- - libgcc/config/microblaze/t-microblaze | 11 +++-------- - 3 files changed, 10 insertions(+), 17 deletions(-) - -diff --git a/gcc/config/microblaze/microblaze-c.c b/gcc/config/microblaze/microblaze-c.c -index d8a1d13..6586575 100644 ---- a/gcc/config/microblaze/microblaze-c.c -+++ b/gcc/config/microblaze/microblaze-c.c -@@ -102,6 +102,7 @@ microblaze_cpp_define (cpp_reader *pfile) - } - if (TARGET_MB_64) - { -+ builtin_define ("__microblaze64"); - builtin_define ("__arch64__"); - builtin_define ("__microblaze64__"); - builtin_define ("__MICROBLAZE64__"); -diff --git a/gcc/config/microblaze/t-microblaze b/gcc/config/microblaze/t-microblaze -index 9fc80b1..35ab965 100644 ---- a/gcc/config/microblaze/t-microblaze -+++ b/gcc/config/microblaze/t-microblaze -@@ -1,12 +1,9 @@ --MULTILIB_OPTIONS = mxl-barrel-shift mno-xl-soft-mul mxl-multiply-high mlittle-endian m64 --MULTILIB_DIRNAMES = bs m mh le m64 --MULTILIB_EXCEPTIONS = *mxl-barrel-shift/mxl-multiply-high mxl-multiply-high --MULTILIB_EXCEPTIONS += *mxl-barrel-shift/mxl-multiply-high/mlittle-endian --MULTILIB_EXCEPTIONS += *mxl-barrel-shift/mxl-multiply-high/mlittle-endian/m64 --MULTILIB_EXCEPTIONS += *mxl-barrel-shift/mxl-multiply-high/m64 mxl-multiply-high --MULTILIB_EXCEPTIONS += mxl-multiply-high/mlittle-endian --MULTILIB_EXCEPTIONS += mxl-multiply-high/m64 --MULTILIB_EXCEPTIONS += *mxl-multiply-high/mlittle-endian/m64 -+MULTILIB_OPTIONS = m64 mxl-barrel-shift mlittle-endian mno-xl-soft-mul mxl-multiply-high -+MULTILIB_DIRNAMES = m64 bs le m mh -+MULTILIB_EXCEPTIONS = *m64/mxl-multiply-high mxl-multiply-high -+MULTILIB_EXCEPTIONS += *mxl-barrel-shift/mxl-multiply-high mxl-multiply-high -+MULTILIB_EXCEPTIONS += *mlittle-endian/mxl-multiply-high mxl-multiply-high -+MULTILIB_EXCEPTIONS += *m64/mxl-barrel-shift/mlittle-endian/mxl-multiply-high - - # Extra files - microblaze-c.o: $(srcdir)/config/microblaze/microblaze-c.c \ -diff --git a/libgcc/config/microblaze/t-microblaze b/libgcc/config/microblaze/t-microblaze -index 35021b2..8d954a4 100644 ---- a/libgcc/config/microblaze/t-microblaze -+++ b/libgcc/config/microblaze/t-microblaze -@@ -1,16 +1,11 @@ --LIB2FUNCS_EXCLUDE += _divsi3 _modsi3 _mulsi3 _udivsi3 _umodsi3 \ -- _divdi3 _moddi3 _muldi3 _udivdi3 _umoddi3 -+LIB2FUNCS_EXCLUDE += _divsi3 _modsi3 _mulsi3 _udivsi3 _umodsi3 - - LIB2ADD += \ - $(srcdir)/config/microblaze/divsi3.S \ -- $(srcdir)/config/microblaze/divdi3.S \ - $(srcdir)/config/microblaze/modsi3.S \ -- $(srcdir)/config/microblaze/moddi3.S \ -+ $(srcdir)/config/microblaze/muldi3_hard.S \ - $(srcdir)/config/microblaze/mulsi3.S \ -- $(srcdir)/config/microblaze/muldi3.S \ - $(srcdir)/config/microblaze/stack_overflow_exit.S \ - $(srcdir)/config/microblaze/udivsi3.S \ -- $(srcdir)/config/microblaze/udivdi3.S \ - $(srcdir)/config/microblaze/umodsi3.S \ -- $(srcdir)/config/microblaze/umoddi3.S \ -- $(srcdir)/config/microblaze/divsi3_table.c \ -+ $(srcdir)/config/microblaze/divsi3_table.c --- -2.7.4 - diff --git a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0045-Fixed-issues-like.patch b/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0045-Fixed-issues-like.patch deleted file mode 100644 index 8c0bde71..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0045-Fixed-issues-like.patch +++ /dev/null @@ -1,70 +0,0 @@ -From 654582846ebf847b52e769eb6e015c8e486461d6 Mon Sep 17 00:00:00 2001 -From: Nagaraju Mekala <nmekala@xilix.com> -Date: Tue, 11 Sep 2018 14:58:00 +0530 -Subject: [PATCH 45/54] Fixed issues like: 1 Interrupt alignment issue 2 Sign - extension issue - ---- - gcc/config/microblaze/microblaze.c | 16 ++++++++++------ - gcc/config/microblaze/microblaze.md | 2 +- - 2 files changed, 11 insertions(+), 7 deletions(-) - -diff --git a/gcc/config/microblaze/microblaze.c b/gcc/config/microblaze/microblaze.c -index fab79d9..6b6ca61 100644 ---- a/gcc/config/microblaze/microblaze.c -+++ b/gcc/config/microblaze/microblaze.c -@@ -2241,9 +2241,14 @@ compute_frame_size (HOST_WIDE_INT size) - - total_size += gp_reg_size; - -- /* Add 4 bytes for MSR. */ -+ /* Add 4/8 bytes for MSR. */ - if (microblaze_is_interrupt_variant ()) -- total_size += 4; -+ { -+ if (TARGET_MB_64) -+ total_size += 8; -+ else -+ total_size += 4; -+ } - - /* No space to be allocated for link register in leaf functions with no other - stack requirements. */ -@@ -2527,7 +2532,6 @@ print_operand (FILE * file, rtx op, int letter) - else if (letter == 'h' || letter == 'j') - { - long val[2]; -- int val1[2]; - long l[2]; - if (code == CONST_DOUBLE) - { -@@ -2542,10 +2546,10 @@ print_operand (FILE * file, rtx op, int letter) - } - else if (code == CONST_INT || code == CONST)// || code == SYMBOL_REF ||code == LABEL_REF) - { -- val1[0] = (INTVAL (op) & 0xffffffff00000000LL) >> 32; -- val1[1] = INTVAL (op) & 0x00000000ffffffffLL; -+ val[0] = (INTVAL (op) & 0xffffffff00000000LL) >> 32; -+ val[1] = INTVAL (op) & 0x00000000ffffffffLL; - } -- fprintf (file, "0x%8.8lx", (letter == 'h') ? val1[0] : val1[1]); -+ fprintf (file, "0x%8.8lx", (letter == 'h') ? val[0] : val[1]); - } - else if (code == CONST_DOUBLE) - { -diff --git a/gcc/config/microblaze/microblaze.md b/gcc/config/microblaze/microblaze.md -index 53ea401..3a6943b 100644 ---- a/gcc/config/microblaze/microblaze.md -+++ b/gcc/config/microblaze/microblaze.md -@@ -1094,7 +1094,7 @@ - case 1: - case 2: - { -- output_asm_insn ("ll%i1\t%0,%1", operands); -+ output_asm_insn ("lw%i1\t%0,%1", operands); - return "sextl32\t%0,%0"; - } - } --- -2.7.4 - diff --git a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0046-Fixed-below-issues.patch b/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0046-Fixed-below-issues.patch deleted file mode 100644 index 22bb5b2f..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0046-Fixed-below-issues.patch +++ /dev/null @@ -1,306 +0,0 @@ -From 48f9f9a1c6809b14e7cfdd2343df92c0de18d730 Mon Sep 17 00:00:00 2001 -From: Nagaraju Mekala <nmekala@xilix.com> -Date: Fri, 28 Sep 2018 11:59:12 +0530 -Subject: [PATCH 46/54] Fixed below issues: - Floating point print issues in - 64bit mode - Dejagnu Jump related issues - Added dbl instruction - ---- - gcc/config/microblaze/microblaze.c | 12 ++++- - gcc/config/microblaze/microblaze.h | 7 +++ - gcc/config/microblaze/microblaze.md | 89 ++++++++++++++++++++++++++++++------- - libgcc/config/microblaze/crti.S | 24 +++++++++- - libgcc/config/microblaze/crtn.S | 13 ++++++ - 5 files changed, 127 insertions(+), 18 deletions(-) - -diff --git a/gcc/config/microblaze/microblaze.c b/gcc/config/microblaze/microblaze.c -index 6b6ca61..33d183e 100644 ---- a/gcc/config/microblaze/microblaze.c -+++ b/gcc/config/microblaze/microblaze.c -@@ -2536,7 +2536,12 @@ print_operand (FILE * file, rtx op, int letter) - if (code == CONST_DOUBLE) - { - if (GET_MODE (op) == DFmode) -- REAL_VALUE_TO_TARGET_DOUBLE (*CONST_DOUBLE_REAL_VALUE (op), val); -+ { -+ if (TARGET_MB_64) -+ REAL_VALUE_TO_TARGET_LONG_DOUBLE (*CONST_DOUBLE_REAL_VALUE (op), val); -+ else -+ REAL_VALUE_TO_TARGET_DOUBLE (*CONST_DOUBLE_REAL_VALUE (op), val); -+ } - else - { - REAL_VALUE_TO_TARGET_DOUBLE (*CONST_DOUBLE_REAL_VALUE (op), l); -@@ -3874,7 +3879,10 @@ microblaze_expand_divide (rtx operands[]) - gen_rtx_PLUS (QImode, regt1, div_table_rtx)); - - insn = emit_insn (gen_zero_extendqisi2(operands[0],mem_rtx)); -- jump = emit_jump_insn_after (gen_jump (div_end_label), insn); -+ if (TARGET_MB_64) -+ jump = emit_jump_insn_after (gen_jump_64 (div_end_label), insn); -+ else -+ jump = emit_jump_insn_after (gen_jump (div_end_label), insn); - JUMP_LABEL (jump) = div_end_label; - LABEL_NUSES (div_end_label) = 1; - emit_barrier (); -diff --git a/gcc/config/microblaze/microblaze.h b/gcc/config/microblaze/microblaze.h -index 1e60513..e34f549 100644 ---- a/gcc/config/microblaze/microblaze.h -+++ b/gcc/config/microblaze/microblaze.h -@@ -892,10 +892,17 @@ do { \ - /* We do this to save a few 10s of code space that would be taken up - by the call_FUNC () wrappers, used by the generic CRT_CALL_STATIC_FUNCTION - definition in crtstuff.c. */ -+#ifdef __arch64__ -+#define CRT_CALL_STATIC_FUNCTION(SECTION_OP, FUNC) \ -+ asm ( SECTION_OP "\n" \ -+ "\tbrealid r15, " #FUNC "\n\t nop\n" \ -+ TEXT_SECTION_ASM_OP); -+#else - #define CRT_CALL_STATIC_FUNCTION(SECTION_OP, FUNC) \ - asm ( SECTION_OP "\n" \ - "\tbrlid r15, " #FUNC "\n\t nop\n" \ - TEXT_SECTION_ASM_OP); -+#endif - - /* We need to group -lm as well, since some Newlib math functions - reference __errno! */ -diff --git a/gcc/config/microblaze/microblaze.md b/gcc/config/microblaze/microblaze.md -index 3a6943b..2669a28 100644 ---- a/gcc/config/microblaze/microblaze.md -+++ b/gcc/config/microblaze/microblaze.md -@@ -525,6 +525,15 @@ - (set_attr "mode" "SF") - (set_attr "length" "4")]) - -+(define_insn "floatdidf2" -+ [(set (match_operand:DF 0 "register_operand" "=d") -+ (float:DF (match_operand:DI 1 "register_operand" "d")))] -+ "TARGET_MB_64" -+ "dbl\t%0,%1" -+ [(set_attr "type" "fcvt") -+ (set_attr "mode" "DF") -+ (set_attr "length" "4")]) -+ - (define_insn "fix_truncsfsi2" - [(set (match_operand:SI 0 "register_operand" "=d") - (fix:SI (match_operand:SF 1 "register_operand" "d")))] -@@ -1298,7 +1307,7 @@ - (define_insn "movdi_long_int" - [(set (match_operand:DI 0 "nonimmediate_operand" "=d") - (match_operand:DI 1 "general_operand" "i"))] -- "" -+ "TARGET_MB_64" - "addlik\t%0,r0,%h1\n\tbsllli\t%0,%0,32\n\taddlik\t%0,%0,%j1 #li => la"; - [(set_attr "type" "no_delay_arith") - (set_attr "mode" "DI") -@@ -1581,7 +1590,7 @@ - return "ll%i1\t%0,%1"; - case 3: - { -- return "addlik\t%0,r0,%h1 \n\tbsllli\t%0,%0,32\n\taddlik\t%0,%0,%j1 #Xfer Lo"; -+ return "addlik\t%0,r0,%j1 \n\tbsllli\t%0,%0,32\n\taddlik\t%0,%0,%h1 #Xfer Lo"; - } - case 5: - return "sl%i0\t%1,%0"; -@@ -2371,9 +2380,9 @@ else - - (define_insn "long_branch_compare" - [(set (pc) -- (if_then_else (match_operator 0 "cmp_op" -- [(match_operand 1 "register_operand" "d") -- (match_operand 2 "register_operand" "d") -+ (if_then_else (match_operator:DI 0 "cmp_op" -+ [(match_operand:DI 1 "register_operand" "d") -+ (match_operand:DI 2 "register_operand" "d") - ]) - (label_ref (match_operand 3)) - (pc))) -@@ -2495,6 +2504,20 @@ else - ;;---------------------------------------------------------------- - ;; Unconditional branches - ;;---------------------------------------------------------------- -+(define_insn "jump_64" -+ [(set (pc) -+ (label_ref (match_operand 0 "" "")))] -+ "TARGET_MB_64" -+ { -+ if (GET_CODE (operands[0]) == REG) -+ return "brea%?\t%0"; -+ else -+ return "breai%?\t%l0"; -+ } -+ [(set_attr "type" "jump") -+ (set_attr "mode" "none") -+ (set_attr "length" "4")]) -+ - (define_insn "jump" - [(set (pc) - (label_ref (match_operand 0 "" "")))] -@@ -2538,19 +2561,28 @@ else - (use (label_ref (match_operand 1 "" "")))] - "" - { -- //gcc_assert (GET_MODE (operands[0]) == Pmode); -- -+ gcc_assert (GET_MODE (operands[0]) == Pmode); -+ - if (!flag_pic) -- emit_jump_insn (gen_tablejump_internal1 (operands[0], operands[1])); -- else -- emit_jump_insn (gen_tablejump_internal3 (operands[0], operands[1])); -+ { -+ if (!TARGET_MB_64) -+ emit_jump_insn (gen_tablejump_internal1 (operands[0], operands[1])); -+ else -+ emit_jump_insn (gen_tablejump_internal2 (operands[0], operands[1])); -+ } -+ else { -+ if (!TARGET_MB_64) -+ emit_jump_insn (gen_tablejump_internal3 (operands[0], operands[1])); -+ else -+ emit_jump_insn (gen_tablejump_internal4 (operands[0], operands[1])); -+ } - DONE; - } - ) - - (define_insn "tablejump_internal1" - [(set (pc) -- (match_operand 0 "register_operand" "d")) -+ (match_operand:SI 0 "register_operand" "d")) - (use (label_ref (match_operand 1 "" "")))] - "" - "bra%?\t%0 " -@@ -2558,11 +2590,21 @@ else - (set_attr "mode" "none") - (set_attr "length" "4")]) - -+(define_insn "tablejump_internal2" -+ [(set (pc) -+ (match_operand:DI 0 "register_operand" "d")) -+ (use (label_ref (match_operand 1 "" "")))] -+ "TARGET_MB_64" -+ "bra%?\t%0 " -+ [(set_attr "type" "jump") -+ (set_attr "mode" "none") -+ (set_attr "length" "4")]) -+ - (define_expand "tablejump_internal3" - [(parallel [(set (pc) -- (plus (match_operand 0 "register_operand" "d") -- (label_ref (match_operand:SI 1 "" "")))) -- (use (label_ref (match_dup 1)))])] -+ (plus:SI (match_operand:SI 0 "register_operand" "d") -+ (label_ref:SI (match_operand:SI 1 "" "")))) -+ (use (label_ref:SI (match_dup 1)))])] - "" - "" - ) -@@ -2593,6 +2635,23 @@ else - "" - ) - -+(define_insn "" -+ [(set (pc) -+ (plus:DI (match_operand:DI 0 "register_operand" "d") -+ (label_ref:DI (match_operand 1 "" "")))) -+ (use (label_ref:DI (match_dup 1)))] -+ "TARGET_MB_64 && NEXT_INSN (as_a <rtx_insn *> (operands[1])) != 0 -+ && GET_CODE (PATTERN (NEXT_INSN (as_a <rtx_insn *> (operands[1])))) == ADDR_DIFF_VEC -+ && flag_pic" -+ { -+ output_asm_insn ("addlk\t%0,%0,r20",operands); -+ return "bra%?\t%0"; -+} -+ [(set_attr "type" "jump") -+ (set_attr "mode" "none") -+ (set_attr "length" "4")]) -+ -+ - ;;---------------------------------------------------------------- - ;; Function prologue/epilogue and stack allocation - ;;---------------------------------------------------------------- -@@ -3097,7 +3156,7 @@ else - ;; The insn to set GOT. The hardcoded number "8" accounts for $pc difference - ;; between "mfs" and "addik" instructions. - (define_insn "set_got" -- [(set (match_operand:SI 0 "register_operand" "=r") -+ [(set (match_operand 0 "register_operand" "=r") - (unspec:SI [(const_int 0)] UNSPEC_SET_GOT))] - "" - "mfs\t%0,rpc\n\taddik\t%0,%0,_GLOBAL_OFFSET_TABLE_+8" -diff --git a/libgcc/config/microblaze/crti.S b/libgcc/config/microblaze/crti.S -index 3386520..3d4cde2 100644 ---- a/libgcc/config/microblaze/crti.S -+++ b/libgcc/config/microblaze/crti.S -@@ -33,11 +33,32 @@ - .section .init, "ax" - .global __init - -+#ifdef __arch64__ - .weak _stack -- .set _stack, 0xffffffff -+ .set _stack, 0xffffffffffffffff - .weak _stack_end - .set _stack_end, 0 - -+ .align 3 -+__init: -+ addlik r1, r1, -32 -+ sl r15, r0, r1 -+ addlik r11, r0, _stack -+ mts rshr, r11 -+ addlik r11, r0, _stack_end -+ mts rslr, r11 -+ -+ .section .fini, "ax" -+ .global __fini -+ .align 3 -+__fini: -+ addlik r1, r1, -32 -+ sl r15, r0, r1 -+#else -+ .weak _stack -+ .set _stack, 0xffffffff -+ .weak _stack_end -+ .set _stack_end, 0 - .align 2 - __init: - addik r1, r1, -16 -@@ -53,3 +74,4 @@ __init: - __fini: - addik r1, r1, -16 - sw r15, r0, r1 -+#endif -diff --git a/libgcc/config/microblaze/crtn.S b/libgcc/config/microblaze/crtn.S -index 04e73d7..c262ce0 100644 ---- a/libgcc/config/microblaze/crtn.S -+++ b/libgcc/config/microblaze/crtn.S -@@ -29,7 +29,19 @@ - .section .note.GNU-stack,"",%progbits - .previous - #endif -+#ifdef __arch64__ -+ .section .init, "ax" -+ ll r15, r0, r1 -+ addlik r1, r1, 32 -+ rtsd r15, 8 -+ nop - -+ .section .fini, "ax" -+ ll r15, r0, r1 -+ addlik r1, r1, 32 -+ rtsd r15, 8 -+ nop -+#else - .section .init, "ax" - lw r15, r0, r1 - rtsd r15, 8 -@@ -39,3 +51,4 @@ - lw r15, r0, r1 - rtsd r15, 8 - addik r1, r1, 16 -+#endif --- -2.7.4 - diff --git a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0047-Added-double-arith-instructions.patch b/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0047-Added-double-arith-instructions.patch deleted file mode 100644 index f28d9f51..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0047-Added-double-arith-instructions.patch +++ /dev/null @@ -1,135 +0,0 @@ -From b09721c830dd0831f50084e2e64920f83618e3f4 Mon Sep 17 00:00:00 2001 -From: Nagaraju Mekala <nmekala@xilix.com> -Date: Tue, 9 Oct 2018 10:07:08 +0530 -Subject: [PATCH 47/54] -Added double arith instructions -Fixed prologue stack - pointer decrement issue - ---- - gcc/config/microblaze/microblaze.md | 78 ++++++++++++++++++++++++++++++++----- - gcc/config/microblaze/t-microblaze | 7 ++++ - 2 files changed, 76 insertions(+), 9 deletions(-) - -diff --git a/gcc/config/microblaze/microblaze.md b/gcc/config/microblaze/microblaze.md -index 2669a28..dca61d6 100644 ---- a/gcc/config/microblaze/microblaze.md -+++ b/gcc/config/microblaze/microblaze.md -@@ -525,6 +525,66 @@ - (set_attr "mode" "SF") - (set_attr "length" "4")]) - -+(define_insn "fix_truncsfsi2" -+ [(set (match_operand:SI 0 "register_operand" "=d") -+ (fix:SI (match_operand:SF 1 "register_operand" "d")))] -+ "TARGET_HARD_FLOAT && TARGET_FLOAT_CONVERT" -+ "fint\t%0,%1" -+ [(set_attr "type" "fint") -+ (set_attr "mode" "SF") -+ (set_attr "length" "4")]) -+ -+ -+(define_insn "adddf3" -+ [(set (match_operand:DF 0 "register_operand" "=d") -+ (plus:DF (match_operand:DF 1 "register_operand" "d") -+ (match_operand:DF 2 "register_operand" "d")))] -+ "TARGET_MB_64" -+ "dadd\t%0,%1,%2" -+ [(set_attr "type" "fadd") -+ (set_attr "mode" "DF") -+ (set_attr "length" "4")]) -+ -+(define_insn "subdf3" -+ [(set (match_operand:DF 0 "register_operand" "=d") -+ (minus:DF (match_operand:DF 1 "register_operand" "d") -+ (match_operand:DF 2 "register_operand" "d")))] -+ "TARGET_MB_64" -+ "drsub\t%0,%2,%1" -+ [(set_attr "type" "frsub") -+ (set_attr "mode" "DF") -+ (set_attr "length" "4")]) -+ -+(define_insn "muldf3" -+ [(set (match_operand:DF 0 "register_operand" "=d") -+ (mult:DF (match_operand:DF 1 "register_operand" "d") -+ (match_operand:DF 2 "register_operand" "d")))] -+ "TARGET_MB_64" -+ "dmul\t%0,%1,%2" -+ [(set_attr "type" "fmul") -+ (set_attr "mode" "DF") -+ (set_attr "length" "4")]) -+ -+(define_insn "divdf3" -+ [(set (match_operand:DF 0 "register_operand" "=d") -+ (div:DF (match_operand:DF 1 "register_operand" "d") -+ (match_operand:DF 2 "register_operand" "d")))] -+ "TARGET_MB_64" -+ "ddiv\t%0,%2,%1" -+ [(set_attr "type" "fdiv") -+ (set_attr "mode" "DF") -+ (set_attr "length" "4")]) -+ -+ -+(define_insn "sqrtdf2" -+ [(set (match_operand:DF 0 "register_operand" "=d") -+ (sqrt:DF (match_operand:DF 1 "register_operand" "d")))] -+ "TARGET_MB_64" -+ "dsqrt\t%0,%1" -+ [(set_attr "type" "fsqrt") -+ (set_attr "mode" "DF") -+ (set_attr "length" "4")]) -+ - (define_insn "floatdidf2" - [(set (match_operand:DF 0 "register_operand" "=d") - (float:DF (match_operand:DI 1 "register_operand" "d")))] -@@ -534,13 +594,13 @@ - (set_attr "mode" "DF") - (set_attr "length" "4")]) - --(define_insn "fix_truncsfsi2" -- [(set (match_operand:SI 0 "register_operand" "=d") -- (fix:SI (match_operand:SF 1 "register_operand" "d")))] -- "TARGET_HARD_FLOAT && TARGET_FLOAT_CONVERT" -- "fint\t%0,%1" -- [(set_attr "type" "fint") -- (set_attr "mode" "SF") -+(define_insn "floatdfdi2" -+ [(set (match_operand:DI 0 "register_operand" "=d") -+ (float:DI (match_operand:DF 1 "register_operand" "d")))] -+ "TARGET_MB_64" -+ "dlong\t%0,%1" -+ [(set_attr "type" "fcvt") -+ (set_attr "mode" "DI") - (set_attr "length" "4")]) - - ;;---------------------------------------------------------------- -@@ -658,8 +718,8 @@ - "TARGET_MB_64" - "@ - rsubl\t%0,%2,%1 -- addik\t%0,%z1,-%2 -- addik\t%0,%z1,-%2" -+ addlik\t%0,%z1,-%2 -+ addlik\t%0,%z1,-%2" - [(set_attr "type" "arith,no_delay_arith,no_delay_arith") - (set_attr "mode" "DI") - (set_attr "length" "4,4,4")]) -diff --git a/gcc/config/microblaze/t-microblaze b/gcc/config/microblaze/t-microblaze -index 35ab965..dfef45c 100644 ---- a/gcc/config/microblaze/t-microblaze -+++ b/gcc/config/microblaze/t-microblaze -@@ -1,6 +1,13 @@ - MULTILIB_OPTIONS = m64 mxl-barrel-shift mlittle-endian mno-xl-soft-mul mxl-multiply-high - MULTILIB_DIRNAMES = m64 bs le m mh - MULTILIB_EXCEPTIONS = *m64/mxl-multiply-high mxl-multiply-high -+MULTILIB_EXCEPTIONS += *m64 -+MULTILIB_EXCEPTIONS += *m64/mxl-barrel-shift -+MULTILIB_EXCEPTIONS += *m64/mno-xl-soft-mul -+MULTILIB_EXCEPTIONS += *m64/mxl-barrel-shift/mno-xl-soft-mul -+MULTILIB_EXCEPTIONS += *m64/mno-xl-soft-mul -+MULTILIB_EXCEPTIONS += *m64/mxl-barrel-shift/mno-xl-soft-mul/mxl-multiply-high -+MULTILIB_EXCEPTIONS += *m64/mno-xl-soft-mul/mxl-multiply-high - MULTILIB_EXCEPTIONS += *mxl-barrel-shift/mxl-multiply-high mxl-multiply-high - MULTILIB_EXCEPTIONS += *mlittle-endian/mxl-multiply-high mxl-multiply-high - MULTILIB_EXCEPTIONS += *m64/mxl-barrel-shift/mlittle-endian/mxl-multiply-high --- -2.7.4 - diff --git a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0048-Fixed-the-issue-in-the-delay-slot-with-swap-instruct.patch b/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0048-Fixed-the-issue-in-the-delay-slot-with-swap-instruct.patch deleted file mode 100644 index 9a214d55..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0048-Fixed-the-issue-in-the-delay-slot-with-swap-instruct.patch +++ /dev/null @@ -1,37 +0,0 @@ -From 1ed548dd5993b8c3e58ef393467bdeea49c437be Mon Sep 17 00:00:00 2001 -From: Nagaraju Mekala <nmekala@xilix.com> -Date: Fri, 12 Oct 2018 16:07:36 +0530 -Subject: [PATCH 48/54] Fixed the issue in the delay slot with swap - instructions - ---- - gcc/config/microblaze/microblaze.md | 6 ++++++ - 1 file changed, 6 insertions(+) - -diff --git a/gcc/config/microblaze/microblaze.md b/gcc/config/microblaze/microblaze.md -index dca61d6..d037843 100644 ---- a/gcc/config/microblaze/microblaze.md -+++ b/gcc/config/microblaze/microblaze.md -@@ -441,6 +441,9 @@ - (bswap:SI (match_operand:SI 1 "register_operand" "r")))] - "TARGET_REORDER" - "swapb %0, %1" -+ [(set_attr "type" "no_delay_arith") -+ (set_attr "mode" "SI") -+ (set_attr "length" "4")] - ) - - (define_insn "bswaphi2" -@@ -449,6 +452,9 @@ - "TARGET_REORDER" - "swapb %0, %1 - swaph %0, %0" -+ [(set_attr "type" "no_delay_arith") -+ (set_attr "mode" "SI") -+ (set_attr "length" "8")] - ) - - ;;---------------------------------------------------------------- --- -2.7.4 - diff --git a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0049-Fixed-the-load-store-issue-with-the-32bit-arith-libr.patch b/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0049-Fixed-the-load-store-issue-with-the-32bit-arith-libr.patch deleted file mode 100644 index a682bc19..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0049-Fixed-the-load-store-issue-with-the-32bit-arith-libr.patch +++ /dev/null @@ -1,256 +0,0 @@ -From 1c889b64454f63f164f34d79d891d91b0bb4731f Mon Sep 17 00:00:00 2001 -From: Nagaraju Mekala <nmekala@xilix.com> -Date: Sat, 13 Oct 2018 21:12:43 +0530 -Subject: [PATCH 49/54] Fixed the load store issue with the 32bit arith - libraries - ---- - libgcc/config/microblaze/divsi3.S | 25 ++++++++++++++++++++++++- - libgcc/config/microblaze/modsi3.S | 26 +++++++++++++++++++++++++- - libgcc/config/microblaze/mulsi3.S | 3 +++ - libgcc/config/microblaze/udivsi3.S | 24 +++++++++++++++++++++++- - libgcc/config/microblaze/umodsi3.S | 24 +++++++++++++++++++++++- - 5 files changed, 98 insertions(+), 4 deletions(-) - -diff --git a/libgcc/config/microblaze/divsi3.S b/libgcc/config/microblaze/divsi3.S -index 663d398..7e7d875 100644 ---- a/libgcc/config/microblaze/divsi3.S -+++ b/libgcc/config/microblaze/divsi3.S -@@ -41,6 +41,17 @@ - .globl __divsi3 - .ent __divsi3 - .type __divsi3,@function -+#ifdef __arch64__ -+ .align 3 -+__divsi3: -+ .frame r1,0,r15 -+ -+ ADDIK r1,r1,-32 -+ SLI r28,r1,0 -+ SLI r29,r1,8 -+ SLI r30,r1,16 -+ SLI r31,r1,24 -+#else - __divsi3: - .frame r1,0,r15 - -@@ -49,7 +60,7 @@ __divsi3: - SWI r29,r1,4 - SWI r30,r1,8 - SWI r31,r1,12 -- -+#endif - BEQI r6,$LaDiv_By_Zero # Div_by_Zero # Division Error - BEQI r5,$LaResult_Is_Zero # Result is Zero - BGEID r5,$LaR5_Pos -@@ -89,6 +100,17 @@ $LaLOOP_END: - $LaDiv_By_Zero: - $LaResult_Is_Zero: - OR r3,r0,r0 # set result to 0 -+#ifdef __arch64__ -+$LaRETURN_HERE: -+# Restore values of CSRs and that of r3 and the divisor and the dividend -+ LLI r28,r1,0 -+ LLI r29,r1,8 -+ LLI r30,r1,16 -+ LLI r31,r1,24 -+ ADDLIK r1,r1,32 -+ RTSD r15,8 -+ NOP -+#else - $LaRETURN_HERE: - # Restore values of CSRs and that of r3 and the divisor and the dividend - LWI r28,r1,0 -@@ -97,6 +119,7 @@ $LaRETURN_HERE: - LWI r31,r1,12 - RTSD r15,8 - ADDIK r1,r1,16 -+#endif - .end __divsi3 - .size __divsi3, . - __divsi3 - -diff --git a/libgcc/config/microblaze/modsi3.S b/libgcc/config/microblaze/modsi3.S -index 71b56e30..7e85064 100644 ---- a/libgcc/config/microblaze/modsi3.S -+++ b/libgcc/config/microblaze/modsi3.S -@@ -41,6 +41,17 @@ - .globl __modsi3 - .ent __modsi3 - .type __modsi3,@function -+#ifdef __arch64__ -+ .align 3 -+__modsi3: -+ .frame r1,0,r15 -+ -+ addlik r1,r1,-32 -+ sli r28,r1,0 -+ sli r29,r1,8 -+ sli r30,r1,16 -+ sli r31,r1,24 -+#else - __modsi3: - .frame r1,0,r15 - -@@ -49,6 +60,7 @@ __modsi3: - swi r29,r1,4 - swi r30,r1,8 - swi r31,r1,12 -+#endif - - BEQI r6,$LaDiv_By_Zero # Div_by_Zero # Division Error - BEQI r5,$LaResult_Is_Zero # Result is Zero -@@ -88,6 +100,18 @@ $LaLOOP_END: - $LaDiv_By_Zero: - $LaResult_Is_Zero: - or r3,r0,r0 # set result to 0 [Both mod as well as div are 0] -+ -+#ifdef __arch64__ -+$LaRETURN_HERE: -+# Restore values of CSRs and that of r3 and the divisor and the dividend -+ lli r28,r1,0 -+ lli r29,r1,8 -+ lli r30,r1,16 -+ lli r31,r1,24 -+ addik r1,r1,32 -+ rtsd r15,8 -+ nop -+#else - $LaRETURN_HERE: - # Restore values of CSRs and that of r3 and the divisor and the dividend - lwi r28,r1,0 -@@ -95,7 +119,7 @@ $LaRETURN_HERE: - lwi r30,r1,8 - lwi r31,r1,12 - rtsd r15,8 -- addik r1,r1,16 -+#endif - .end __modsi3 - .size __modsi3, . - __modsi3 - -diff --git a/libgcc/config/microblaze/mulsi3.S b/libgcc/config/microblaze/mulsi3.S -index 40b0b15..31a73c2 100644 ---- a/libgcc/config/microblaze/mulsi3.S -+++ b/libgcc/config/microblaze/mulsi3.S -@@ -41,6 +41,9 @@ - .globl __mulsi3 - .ent __mulsi3 - .type __mulsi3,@function -+#ifdef __arch64__ -+ .align 3 -+#endif - __mulsi3: - .frame r1,0,r15 - add r3,r0,r0 -diff --git a/libgcc/config/microblaze/udivsi3.S b/libgcc/config/microblaze/udivsi3.S -index 2aef8ed..94adb6a 100644 ---- a/libgcc/config/microblaze/udivsi3.S -+++ b/libgcc/config/microblaze/udivsi3.S -@@ -41,6 +41,16 @@ - .globl __udivsi3 - .ent __udivsi3 - .type __udivsi3,@function -+#ifdef __arch64__ -+ .align 3 -+__udivsi3: -+ .frame r1,0,r15 -+ -+ ADDLIK r1,r1,-24 -+ SLI r29,r1,0 -+ SLI r30,r1,8 -+ SLI r31,r1,16 -+#else - __udivsi3: - .frame r1,0,r15 - -@@ -48,7 +58,7 @@ __udivsi3: - SWI r29,r1,0 - SWI r30,r1,4 - SWI r31,r1,8 -- -+#endif - BEQI r6,$LaDiv_By_Zero # Div_by_Zero # Division Error - BEQID r5,$LaResult_Is_Zero # Result is Zero - ADDIK r30,r0,0 # Clear mod -@@ -98,6 +108,17 @@ $LaLOOP_END: - $LaDiv_By_Zero: - $LaResult_Is_Zero: - OR r3,r0,r0 # set result to 0 -+ -+#ifdef __arch64__ -+$LaRETURN_HERE: -+ # Restore values of CSRs and that of r3 and the divisor and the dividend -+ LLI r29,r1,0 -+ LLI r30,r1,8 -+ LLI r31,r1,16 -+ ADDIK r1,r1,24 -+ RTSD r15,8 -+ NOP -+#else - $LaRETURN_HERE: - # Restore values of CSRs and that of r3 and the divisor and the dividend - LWI r29,r1,0 -@@ -105,5 +126,6 @@ $LaRETURN_HERE: - LWI r31,r1,8 - RTSD r15,8 - ADDIK r1,r1,12 -+#endif - .end __udivsi3 - .size __udivsi3, . - __udivsi3 -diff --git a/libgcc/config/microblaze/umodsi3.S b/libgcc/config/microblaze/umodsi3.S -index a2582d0..00b3bdf 100644 ---- a/libgcc/config/microblaze/umodsi3.S -+++ b/libgcc/config/microblaze/umodsi3.S -@@ -41,6 +41,16 @@ - .globl __umodsi3 - .ent __umodsi3 - .type __umodsi3,@function -+#ifdef __arch64__ -+ .align 3 -+__umodsi3: -+ .frame r1,0,r15 -+ -+ addik r1,r1,-24 -+ swi r29,r1,0 -+ swi r30,r1,8 -+ swi r31,r1,16 -+#else - __umodsi3: - .frame r1,0,r15 - -@@ -48,7 +58,7 @@ __umodsi3: - swi r29,r1,0 - swi r30,r1,4 - swi r31,r1,8 -- -+#endif - BEQI r6,$LaDiv_By_Zero # Div_by_Zero # Division Error - BEQId r5,$LaResult_Is_Zero # Result is Zero - ADDIK r3,r0,0 # Clear div -@@ -101,6 +111,17 @@ $LaLOOP_END: - $LaDiv_By_Zero: - $LaResult_Is_Zero: - or r3,r0,r0 # set result to 0 -+ -+#ifdef __arch64__ -+$LaRETURN_HERE: -+# Restore values of CSRs and that of r3 and the divisor and the dividend -+ lli r29,r1,0 -+ lli r30,r1,8 -+ lli r31,r1,16 -+ addlik r1,r1,24 -+ rtsd r15,8 -+ nop -+#else - $LaRETURN_HERE: - # Restore values of CSRs and that of r3 and the divisor and the dividend - lwi r29,r1,0 -@@ -108,5 +129,6 @@ $LaRETURN_HERE: - lwi r31,r1,8 - rtsd r15,8 - addik r1,r1,12 -+#endif - .end __umodsi3 - .size __umodsi3, . - __umodsi3 --- -2.7.4 - diff --git a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0050-extending-the-Dwarf-support-to-64bit-Microblaze.patch b/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0050-extending-the-Dwarf-support-to-64bit-Microblaze.patch deleted file mode 100644 index 95a26db2..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0050-extending-the-Dwarf-support-to-64bit-Microblaze.patch +++ /dev/null @@ -1,25 +0,0 @@ -From 751a01ce1eeaffcd41c504b9bf44868345b45da0 Mon Sep 17 00:00:00 2001 -From: Nagaraju Mekala <nmekala@xilix.com> -Date: Mon, 15 Oct 2018 12:00:10 +0530 -Subject: [PATCH 50/54] extending the Dwarf support to 64bit Microblaze - ---- - gcc/config/microblaze/microblaze.h | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/gcc/config/microblaze/microblaze.h b/gcc/config/microblaze/microblaze.h -index e34f549..0a5ff0a 100644 ---- a/gcc/config/microblaze/microblaze.h -+++ b/gcc/config/microblaze/microblaze.h -@@ -207,7 +207,7 @@ extern enum pipeline_type microblaze_pipe; - /* Use DWARF 2 debugging information by default. */ - #define DWARF2_DEBUGGING_INFO 1 - #define PREFERRED_DEBUGGING_TYPE DWARF2_DEBUG --#define DWARF2_ADDR_SIZE 4 -+#define DWARF2_ADDR_SIZE (TARGET_MB_64 ? 8 : 4) - - /* Target machine storage layout */ - --- -2.7.4 - diff --git a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0051-fixing-the-typo-errors-in-umodsi3-file.patch b/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0051-fixing-the-typo-errors-in-umodsi3-file.patch deleted file mode 100644 index 574037ec..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0051-fixing-the-typo-errors-in-umodsi3-file.patch +++ /dev/null @@ -1,29 +0,0 @@ -From 295046d0a63148fb5a685ae2bd7a06489274c72a Mon Sep 17 00:00:00 2001 -From: Nagaraju Mekala <nmekala@xilix.com> -Date: Tue, 16 Oct 2018 07:55:46 +0530 -Subject: [PATCH 51/54] fixing the typo errors in umodsi3 file - ---- - libgcc/config/microblaze/umodsi3.S | 6 +++--- - 1 file changed, 3 insertions(+), 3 deletions(-) - -diff --git a/libgcc/config/microblaze/umodsi3.S b/libgcc/config/microblaze/umodsi3.S -index 00b3bdf..9bf65c3 100644 ---- a/libgcc/config/microblaze/umodsi3.S -+++ b/libgcc/config/microblaze/umodsi3.S -@@ -47,9 +47,9 @@ __umodsi3: - .frame r1,0,r15 - - addik r1,r1,-24 -- swi r29,r1,0 -- swi r30,r1,8 -- swi r31,r1,16 -+ sli r29,r1,0 -+ sli r30,r1,8 -+ sli r31,r1,16 - #else - __umodsi3: - .frame r1,0,r15 --- -2.7.4 - diff --git a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0052-fixing-the-32bit-LTO-related-issue9-1014024.patch b/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0052-fixing-the-32bit-LTO-related-issue9-1014024.patch deleted file mode 100644 index 95d39bb2..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0052-fixing-the-32bit-LTO-related-issue9-1014024.patch +++ /dev/null @@ -1,68 +0,0 @@ -From d55eff09f175ddbc66e4e800fa5650ce9e2f599e Mon Sep 17 00:00:00 2001 -From: Nagaraju Mekala <nmekala@xilix.com> -Date: Wed, 17 Oct 2018 16:56:14 +0530 -Subject: [PATCH 52/54] fixing the 32bit LTO related issue9(1014024) - ---- - gcc/config/microblaze/microblaze.h | 24 ++++++++++++++---------- - 1 file changed, 14 insertions(+), 10 deletions(-) - -diff --git a/gcc/config/microblaze/microblaze.h b/gcc/config/microblaze/microblaze.h -index 0a5ff0a..740b8d9 100644 ---- a/gcc/config/microblaze/microblaze.h -+++ b/gcc/config/microblaze/microblaze.h -@@ -265,12 +265,14 @@ extern enum pipeline_type microblaze_pipe; - #define WORD_REGISTER_OPERATIONS 1 - - #define LOAD_EXTEND_OP(MODE) ZERO_EXTEND --/* --#define PROMOTE_MODE(MODE, UNSIGNEDP, TYPE) \ -- if (GET_MODE_CLASS (MODE) == MODE_INT \ -- && GET_MODE_SIZE (MODE) < (TARGET_MB_64 ? 8 : 4)) \ -- (MODE) = TARGET_MB_64 ? DImode : SImode; --*/ -+ -+#ifndef __arch64__ -+#define PROMOTE_MODE(MODE, UNSIGNEDP, TYPE) \ -+ if (GET_MODE_CLASS (MODE) == MODE_INT \ -+ && GET_MODE_SIZE (MODE) < 4) \ -+ (MODE) = SImode; -+#endif -+ - /* Standard register usage. */ - - /* On the MicroBlaze, we have 32 integer registers */ -@@ -469,16 +471,18 @@ extern struct microblaze_frame_info current_frame_info; - - #define MAX_ARGS_IN_REGISTERS MB_ABI_MAX_ARG_REGS - -+#ifdef __aarch64__ - #define LIBCALL_VALUE(MODE) \ - gen_rtx_REG (MODE,GP_RETURN) -- --/*#define LIBCALL_VALUE(MODE) \ -+#else -+#define LIBCALL_VALUE(MODE) \ - gen_rtx_REG ( \ - ((GET_MODE_CLASS (MODE) != MODE_INT \ - || GET_MODE_SIZE (MODE) >= 4) \ - ? (MODE) \ - : SImode), GP_RETURN) --*/ -+#endif -+ - /* 1 if N is a possible register number for a function value. - On the MicroBlaze, R2 R3 are the only register thus used. - Currently, R2 are only implemented here (C has no complex type) */ -@@ -518,7 +522,7 @@ typedef struct microblaze_args - /* 4 insns + 2 words of data. */ - #define TRAMPOLINE_SIZE (6 * 4) - --#define TRAMPOLINE_ALIGNMENT 64 -+#define TRAMPOLINE_ALIGNMENT (TARGET_MB_64 ? 64 : 32) - - #define REGNO_OK_FOR_BASE_P(regno) microblaze_regno_ok_for_base_p ((regno), 1) - --- -2.7.4 - diff --git a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0053-Fixed-the-missing-stack-adjustment-in-prologue-of-mo.patch b/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0053-Fixed-the-missing-stack-adjustment-in-prologue-of-mo.patch deleted file mode 100644 index e992075b..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0053-Fixed-the-missing-stack-adjustment-in-prologue-of-mo.patch +++ /dev/null @@ -1,25 +0,0 @@ -From 3e7161218dc8b4dd84ad8d31f6dbaa7c256e7a82 Mon Sep 17 00:00:00 2001 -From: Nagaraju Mekala <nmekala@xilix.com> -Date: Fri, 19 Oct 2018 14:26:25 +0530 -Subject: [PATCH 53/54] Fixed the missing stack adjustment in prologue of - modsi3 function - ---- - libgcc/config/microblaze/modsi3.S | 1 + - 1 file changed, 1 insertion(+) - -diff --git a/libgcc/config/microblaze/modsi3.S b/libgcc/config/microblaze/modsi3.S -index 7e85064..46ff34a 100644 ---- a/libgcc/config/microblaze/modsi3.S -+++ b/libgcc/config/microblaze/modsi3.S -@@ -119,6 +119,7 @@ $LaRETURN_HERE: - lwi r30,r1,8 - lwi r31,r1,12 - rtsd r15,8 -+ addik r1,r1,16 - #endif - .end __modsi3 - .size __modsi3, . - __modsi3 --- -2.7.4 - diff --git a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0054-Patch-Microblaze-corrected-SPN-for-dlong-instruction.patch b/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0054-Patch-Microblaze-corrected-SPN-for-dlong-instruction.patch deleted file mode 100644 index afb88d35..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0054-Patch-Microblaze-corrected-SPN-for-dlong-instruction.patch +++ /dev/null @@ -1,29 +0,0 @@ -From a89b3e6902d7835129ad178f6af896eba15c5d5e Mon Sep 17 00:00:00 2001 -From: Mahesh Bodapati <mbodapat@xilinx.com> -Date: Wed, 24 Oct 2018 18:31:04 +0530 -Subject: [PATCH 54/54] [Patch,Microblaze] : corrected SPN for dlong - instruction mapping. - ---- - gcc/config/microblaze/microblaze.md | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -diff --git a/gcc/config/microblaze/microblaze.md b/gcc/config/microblaze/microblaze.md -index d037843..cbd7e77 100644 ---- a/gcc/config/microblaze/microblaze.md -+++ b/gcc/config/microblaze/microblaze.md -@@ -600,9 +600,9 @@ - (set_attr "mode" "DF") - (set_attr "length" "4")]) - --(define_insn "floatdfdi2" -+(define_insn "fix_truncdfdi2" - [(set (match_operand:DI 0 "register_operand" "=d") -- (float:DI (match_operand:DF 1 "register_operand" "d")))] -+ (fix:DI (fix:DF (match_operand:DF 1 "register_operand" "d"))))] - "TARGET_MB_64" - "dlong\t%0,%1" - [(set_attr "type" "fcvt") --- -2.7.4 - diff --git a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0055-fixing-the-long-long-long-mingw-toolchain-issue.patch b/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0055-fixing-the-long-long-long-mingw-toolchain-issue.patch deleted file mode 100644 index 4c694723..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0055-fixing-the-long-long-long-mingw-toolchain-issue.patch +++ /dev/null @@ -1,59 +0,0 @@ -From 76e231f92afd8fda13d6ae18ef3aef0ea6096489 Mon Sep 17 00:00:00 2001 -From: Nagaraju Mekala <nmekala@xilix.com> -Date: Thu, 29 Nov 2018 17:55:08 +0530 -Subject: [PATCH 55/57] fixing the long & long long mingw toolchain issue - ---- - gcc/config/microblaze/constraints.md | 2 +- - gcc/config/microblaze/microblaze.md | 8 ++++---- - 2 files changed, 5 insertions(+), 5 deletions(-) - -diff --git a/gcc/config/microblaze/constraints.md b/gcc/config/microblaze/constraints.md -index 867a7b5..27c6bfc 100644 ---- a/gcc/config/microblaze/constraints.md -+++ b/gcc/config/microblaze/constraints.md -@@ -55,7 +55,7 @@ - (define_constraint "K" - "A constant in the range 0xffffff8000000000L to 0x0000007fffffffffL (inclusive)." - (and (match_code "const_int") -- (match_test "ival > (long)-549755813888 && ival < (long)549755813887"))) -+ (match_test "ival > (long long)-549755813888 && ival < (long long)549755813887"))) - - ;; Define floating point constraints - -diff --git a/gcc/config/microblaze/microblaze.md b/gcc/config/microblaze/microblaze.md -index cbd7e77..e03b835 100644 ---- a/gcc/config/microblaze/microblaze.md -+++ b/gcc/config/microblaze/microblaze.md -@@ -646,8 +646,8 @@ - if (TARGET_MB_64) - { - if (GET_CODE (operands[2]) == CONST_INT && -- INTVAL(operands[2]) < (long)-549755813888 && -- INTVAL(operands[2]) > (long)549755813887) -+ INTVAL(operands[2]) < (long long)-549755813888 && -+ INTVAL(operands[2]) > (long long)549755813887) - FAIL; - } - }) -@@ -1264,7 +1264,7 @@ - (match_operand:DI 1 "immediate_operand" "J,I,Mnis"))] - "TARGET_MB_64 && (register_operand (operands[0], DImode) && - (GET_CODE (operands[1]) == CONST_INT && -- (INTVAL (operands[1]) <= (long)549755813887 && INTVAL (operands[1]) >= (long)-549755813888)))" -+ (INTVAL (operands[1]) <= (long long)549755813887 && INTVAL (operands[1]) >= (long long)-549755813888)))" - "@ - addlk\t%0,r0,r0\t - addlik\t%0,r0,%1\t #N1 %X1 -@@ -1298,7 +1298,7 @@ - case 1: - case 2: - if (GET_CODE (operands[1]) == CONST_INT && -- (INTVAL (operands[1]) > (long)549755813887 || INTVAL (operands[1]) < (long)-549755813888)) -+ (INTVAL (operands[1]) > (long long)549755813887 || INTVAL (operands[1]) < (long long)-549755813888)) - return "addlik\t%0,r0,%h1\n\tbsllli\t%0,%0,32\n\taddlik\t%0,%0,%j1 #li => la"; - else - return "addlik\t%0,r0,%1"; --- -2.7.4 - diff --git a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0055-microblaze_linker_script_xilinx_ld.patch b/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0055-microblaze_linker_script_xilinx_ld.patch deleted file mode 100644 index c009c92d..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0055-microblaze_linker_script_xilinx_ld.patch +++ /dev/null @@ -1,16 +0,0 @@ -diff --git a/gcc/config/microblaze/microblaze.h b/gcc/config/microblaze/microblaze.h -index 740b8d9..4bda9c2 100644 ---- a/gcc/config/microblaze/microblaze.h -+++ b/gcc/config/microblaze/microblaze.h -@@ -114,8 +114,9 @@ extern enum pipeline_type microblaze_pipe; - %{m64:-EL --oformat=elf64-microblazeel} \ - %{Zxl-mode-xmdstub:-defsym _TEXT_START_ADDR=0x800} \ - %{mxl-mode-xmdstub:-defsym _TEXT_START_ADDR=0x800} \ -- %{mxl-gp-opt:%{G*}} %{!mxl-gp-opt: -G 0} \ -- %{!T*: -dT xilinx.ld%s}" -+ %{mxl-gp-opt:%{G*}} %{!mxl-gp-opt: -G 0}" -+ -+// %{!T*: -dT xilinx.ld%s}" - - /* Specs for the compiler proper */ - diff --git a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0057-Fix-the-MB-64-bug-of-handling-QI-objects.patch b/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0057-Fix-the-MB-64-bug-of-handling-QI-objects.patch deleted file mode 100644 index a5a2039d..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0057-Fix-the-MB-64-bug-of-handling-QI-objects.patch +++ /dev/null @@ -1,47 +0,0 @@ -From 6c58973f1cc1e37773aeab583aa3ac6331489106 Mon Sep 17 00:00:00 2001 -From: Nagaraju <nmekala@xilinx.com> -Date: Thu, 14 Mar 2019 18:11:04 +0530 -Subject: [PATCH 57/57] Fix the MB-64 bug of handling QI objects - ---- - gcc/config/microblaze/microblaze.md | 14 +++++++------- - 1 file changed, 7 insertions(+), 7 deletions(-) - -diff --git a/gcc/config/microblaze/microblaze.md b/gcc/config/microblaze/microblaze.md -index e03b835..88aee9e 100644 ---- a/gcc/config/microblaze/microblaze.md -+++ b/gcc/config/microblaze/microblaze.md -@@ -2345,11 +2345,11 @@ else - - (define_insn "branch_zero_64" - [(set (pc) -- (if_then_else (match_operator:SI 0 "ordered_comparison_operator" -+ (if_then_else (match_operator 0 "ordered_comparison_operator" - [(match_operand:SI 1 "register_operand" "d") - (const_int 0)]) -- (match_operand:SI 2 "pc_or_label_operand" "") -- (match_operand:SI 3 "pc_or_label_operand" ""))) -+ (match_operand 2 "pc_or_label_operand" "") -+ (match_operand 3 "pc_or_label_operand" ""))) - ] - "TARGET_MB_64" - { -@@ -2365,11 +2365,11 @@ else - - (define_insn "long_branch_zero" - [(set (pc) -- (if_then_else (match_operator 0 "ordered_comparison_operator" -- [(match_operand 1 "register_operand" "d") -+ (if_then_else (match_operator:DI 0 "ordered_comparison_operator" -+ [(match_operand:DI 1 "register_operand" "d") - (const_int 0)]) -- (match_operand 2 "pc_or_label_operand" "") -- (match_operand 3 "pc_or_label_operand" ""))) -+ (match_operand:DI 2 "pc_or_label_operand" "") -+ (match_operand:DI 3 "pc_or_label_operand" ""))) - ] - "TARGET_MB_64" - { --- -2.7.4 - diff --git a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0058-Patch-Microblaze-We-will-check-the-possibility-of-pe.patch b/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0058-Patch-Microblaze-We-will-check-the-possibility-of-pe.patch deleted file mode 100644 index 8bc47a43..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0058-Patch-Microblaze-We-will-check-the-possibility-of-pe.patch +++ /dev/null @@ -1,87 +0,0 @@ -From bcbfd9f69d858306a080aa7213e96ca6eca66106 Mon Sep 17 00:00:00 2001 -From: Mahesh Bodapati <mbodapat@xilinx.com> -Date: Fri, 29 Mar 2019 12:08:39 +0530 -Subject: [PATCH 58/61] [Patch,Microblaze] : We will check the possibility of - peephole2 optimization,if we can then we will fix the compiler issue. - ---- - gcc/config/microblaze/microblaze.md | 63 ++++++++++++++++++++++--------------- - 1 file changed, 38 insertions(+), 25 deletions(-) - -diff --git a/gcc/config/microblaze/microblaze.md b/gcc/config/microblaze/microblaze.md -index 88aee9e..8bd175f 100644 ---- a/gcc/config/microblaze/microblaze.md -+++ b/gcc/config/microblaze/microblaze.md -@@ -880,31 +880,44 @@ - (set_attr "mode" "SI") - (set_attr "length" "4")]) - --(define_peephole2 -- [(set (match_operand:SI 0 "register_operand") -- (fix:SI (match_operand:SF 1 "register_operand"))) -- (set (pc) -- (if_then_else (match_operator 2 "ordered_comparison_operator" -- [(match_operand:SI 3 "register_operand") -- (match_operand:SI 4 "arith_operand")]) -- (label_ref (match_operand 5)) -- (pc)))] -- "TARGET_HARD_FLOAT && !TARGET_MB_64" -- [(set (match_dup 1) (match_dup 3))] -- -- { -- rtx condition; -- rtx cmp_op0 = operands[3]; -- rtx cmp_op1 = operands[4]; -- rtx comp_reg = gen_rtx_REG (SImode, MB_ABI_ASM_TEMP_REGNUM); -- -- emit_insn (gen_cstoresf4 (comp_reg, operands[2], -- gen_rtx_REG (SFmode, REGNO (cmp_op0)), -- gen_rtx_REG (SFmode, REGNO (cmp_op1)))); -- condition = gen_rtx_NE (SImode, comp_reg, const0_rtx); -- emit_jump_insn (gen_condjump (condition, operands[5])); -- } --) -+;; peephole2 optimization will be done only if fint and if-then-else -+;; are dependent.added condition for the same. -+;; if they are dependent then gcc is giving "flow control insn inside a basic block" -+;; testcase: -+;; volatile float vec = 1.0; -+;; volatile int ci = 2; -+;; register int cj = (int)(vec); -+;;// ci=cj; -+;;// if (ci <0) { -+;; if (cj < 0) { -+;; ci = 0; -+;; } -+;; commenting for now.we will check the possibility of this optimization later -+ -+;;(define_peephole2 -+;; [(set (match_operand:SI 0 "register_operand") -+;; (fix:SI (match_operand:SF 1 "register_operand"))) -+;; (set (pc) -+;; (if_then_else (match_operator 2 "ordered_comparison_operator" -+;; [(match_operand:SI 3 "register_operand") -+;; (match_operand:SI 4 "arith_operand")]) -+;; (label_ref (match_operand 5)) -+;; (pc)))] -+;; "TARGET_HARD_FLOAT && !TARGET_MB_64 && ((REGNO (operands[0])) == (REGNO (operands[3])))" -+;; [(set (match_dup 1) (match_dup 3))] -+;; { -+;; rtx condition; -+;; rtx cmp_op0 = operands[3]; -+;; rtx cmp_op1 = operands[4]; -+;; rtx comp_reg = gen_rtx_REG (SImode, MB_ABI_ASM_TEMP_REGNUM); -+;; -+;; emit_insn (gen_cstoresf4 (comp_reg, operands[2], -+;; gen_rtx_REG (SFmode, REGNO (cmp_op0)), -+;; gen_rtx_REG (SFmode, REGNO (cmp_op1)))); -+;; condition = gen_rtx_NE (SImode, comp_reg, const0_rtx); -+;; emit_jump_insn (gen_condjump (condition, operands[5])); -+;; } -+;;) - - ;;---------------------------------------------------------------- - ;; Negation and one's complement --- -2.7.4 - diff --git a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0059-Reverting-the-patch-as-kernel-boot-is-not-working-wi.patch b/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0059-Reverting-the-patch-as-kernel-boot-is-not-working-wi.patch deleted file mode 100644 index be4dfad5..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0059-Reverting-the-patch-as-kernel-boot-is-not-working-wi.patch +++ /dev/null @@ -1,51 +0,0 @@ -From 2f22090a7e8216f7a9f7e958b77ac83006a7ce89 Mon Sep 17 00:00:00 2001 -From: Mahesh Bodapati <mbodapat@xilinx.com> -Date: Tue, 16 Apr 2019 17:20:24 +0530 -Subject: [PATCH 59/61] Reverting the patch as kernel boot is not working with - this patch CR-1026413 Revert "[Patch,Microblaze]:reverting the cost check - before propagating constants." - -This reverts commit 7156e379a67fa47a5fb9ede1448c0d528dbda65b. ---- - gcc/cprop.c | 4 ---- - 1 file changed, 4 deletions(-) - -diff --git a/gcc/cprop.c b/gcc/cprop.c -index deb706b..e4df509 100644 ---- a/gcc/cprop.c -+++ b/gcc/cprop.c -@@ -733,7 +733,6 @@ try_replace_reg (rtx from, rtx to, rtx_insn *insn) - int success = 0; - rtx set = single_set (insn); - --#if 0 - bool check_rtx_costs = true; - bool speed = optimize_bb_for_speed_p (BLOCK_FOR_INSN (insn)); - int old_cost = set ? set_rtx_cost (set, speed) : 0; -@@ -745,7 +744,6 @@ try_replace_reg (rtx from, rtx to, rtx_insn *insn) - && (GET_CODE (XEXP (note, 0)) == CONST - || CONSTANT_P (XEXP (note, 0))))) - check_rtx_costs = false; --#endif - - /* Usually we substitute easy stuff, so we won't copy everything. - We however need to take care to not duplicate non-trivial CONST -@@ -754,7 +752,6 @@ try_replace_reg (rtx from, rtx to, rtx_insn *insn) - - validate_replace_src_group (from, to, insn); - --#if 0 - /* If TO is a constant, check the cost of the set after propagation - to the cost of the set before the propagation. If the cost is - higher, then do not replace FROM with TO. */ -@@ -767,7 +764,6 @@ try_replace_reg (rtx from, rtx to, rtx_insn *insn) - return false; - } - --#endif - - if (num_changes_pending () && apply_change_group ()) - success = 1; --- -2.7.4 - diff --git a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0060-Patch-MicroBlaze-fixed-typos-in-mul-div-and-mod-asse.patch b/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0060-Patch-MicroBlaze-fixed-typos-in-mul-div-and-mod-asse.patch deleted file mode 100644 index 1548faad..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0060-Patch-MicroBlaze-fixed-typos-in-mul-div-and-mod-asse.patch +++ /dev/null @@ -1,466 +0,0 @@ -From 80919b0f43b275e70521e4f85cd28bcd0ece3b80 Mon Sep 17 00:00:00 2001 -From: Mahesh Bodapati <mbodapat@xilinx.com> -Date: Wed, 17 Apr 2019 12:36:16 +0530 -Subject: [PATCH 60/61] [Patch,MicroBlaze]: fixed typos in mul,div and mod - assembly files. - ---- - libgcc/config/microblaze/divsi3.S | 47 ++++++++++++++++++++++++++---- - libgcc/config/microblaze/modsi3.S | 40 +++++++++++++++++++++++--- - libgcc/config/microblaze/mulsi3.S | 33 +++++++++++++++++++++- - libgcc/config/microblaze/udivsi3.S | 54 +++++++++++++++++++++++++++++++---- - libgcc/config/microblaze/umodsi3.S | 58 +++++++++++++++++++++++++++++++++++--- - 5 files changed, 212 insertions(+), 20 deletions(-) - -diff --git a/libgcc/config/microblaze/divsi3.S b/libgcc/config/microblaze/divsi3.S -index 7e7d875..cfb4c05 100644 ---- a/libgcc/config/microblaze/divsi3.S -+++ b/libgcc/config/microblaze/divsi3.S -@@ -46,7 +46,7 @@ - __divsi3: - .frame r1,0,r15 - -- ADDIK r1,r1,-32 -+ ADDLIK r1,r1,-32 - SLI r28,r1,0 - SLI r29,r1,8 - SLI r30,r1,16 -@@ -61,13 +61,23 @@ __divsi3: - SWI r30,r1,8 - SWI r31,r1,12 - #endif -- BEQI r6,$LaDiv_By_Zero # Div_by_Zero # Division Error -- BEQI r5,$LaResult_Is_Zero # Result is Zero -- BGEID r5,$LaR5_Pos -+#ifdef __arch64__ -+ BEAEQI r6,$LaDiv_By_Zero # Div_by_Zero # Division Error -+ BEAEQI r5,$LaResult_Is_Zero # Result is Zero -+ BEAGEID r5,$LaR5_Pos -+#else -+ BEQI r6,$LaDiv_By_Zero # Div_by_Zero # Division Error -+ BEQI r5,$LaResult_Is_Zero # Result is Zero -+ BGEID r5,$LaR5_Pos -+#endif - XOR r28,r5,r6 # Get the sign of the result - RSUBI r5,r5,0 # Make r5 positive - $LaR5_Pos: -- BGEI r6,$LaR6_Pos -+#ifdef __arch64__ -+ BEAGEI r6,$LaR6_Pos -+#else -+ BGEI r6,$LaR6_Pos -+#endif - RSUBI r6,r6,0 # Make r6 positive - $LaR6_Pos: - ADDIK r30,r0,0 # Clear mod -@@ -76,26 +86,51 @@ $LaR6_Pos: - - # First part try to find the first '1' in the r5 - $LaDIV0: -- BLTI r5,$LaDIV2 # This traps r5 == 0x80000000 -+#ifdef __arch64__ -+ BEALTI r5,$LaDIV2 # This traps r5 == 0x80000000 -+#else -+ BLTI r5,$LaDIV2 # This traps r5 == 0x80000000 -+#endif - $LaDIV1: - ADD r5,r5,r5 # left shift logical r5 -+#ifdef __arch64__ -+ BEAGTID r5,$LaDIV1 -+#else - BGTID r5,$LaDIV1 -+#endif - ADDIK r29,r29,-1 - $LaDIV2: - ADD r5,r5,r5 # left shift logical r5 get the '1' into the Carry - ADDC r30,r30,r30 # Move that bit into the Mod register - RSUB r31,r6,r30 # Try to subtract (r30 a r6) -+#ifdef __arch64__ -+ BEALTI r31,$LaMOD_TOO_SMALL -+#else - BLTI r31,$LaMOD_TOO_SMALL -+#endif - OR r30,r0,r31 # Move the r31 to mod since the result was positive - ADDIK r3,r3,1 - $LaMOD_TOO_SMALL: - ADDIK r29,r29,-1 -+#ifdef __arch64__ -+ BEAEQi r29,$LaLOOP_END -+#else - BEQi r29,$LaLOOP_END -+#endif - ADD r3,r3,r3 # Shift in the '1' into div -+#ifdef __arch64__ -+ BREAI $LaDIV2 # Div2 -+#else - BRI $LaDIV2 # Div2 -+#endif - $LaLOOP_END: -+#ifdef __arch64__ -+ BEAGEI r28,$LaRETURN_HERE -+ BREAID $LaRETURN_HERE -+#else - BGEI r28,$LaRETURN_HERE - BRID $LaRETURN_HERE -+#endif - RSUBI r3,r3,0 # Negate the result - $LaDiv_By_Zero: - $LaResult_Is_Zero: -diff --git a/libgcc/config/microblaze/modsi3.S b/libgcc/config/microblaze/modsi3.S -index 46ff34a..49618dd 100644 ---- a/libgcc/config/microblaze/modsi3.S -+++ b/libgcc/config/microblaze/modsi3.S -@@ -62,40 +62,72 @@ __modsi3: - swi r31,r1,12 - #endif - -+#ifdef __arch64__ -+ BEAEQI r6,$LaDiv_By_Zero # Div_by_Zero # Division Error -+ BEAEQI r5,$LaResult_Is_Zero # Result is Zero -+ BEAGEId r5,$LaR5_Pos -+#else - BEQI r6,$LaDiv_By_Zero # Div_by_Zero # Division Error - BEQI r5,$LaResult_Is_Zero # Result is Zero - BGEId r5,$LaR5_Pos -+#endif - ADD r28,r5,r0 # Get the sign of the result [ Depends only on the first arg] - RSUBI r5,r5,0 # Make r5 positive - $LaR5_Pos: -- BGEI r6,$LaR6_Pos -+#ifdef __arch64__ -+ BEAGEI r6,$LaR6_Pos -+#else -+ BGEI r6,$LaR6_Pos -+#endif - RSUBI r6,r6,0 # Make r6 positive - $LaR6_Pos: - ADDIK r3,r0,0 # Clear mod - ADDIK r30,r0,0 # clear div -- BLTId r5,$LaDIV2 # If r5 is still negative (0x80000000), skip -+#ifdef __arch64__ -+ BEALTId r5,$LaDIV2 # If r5 is still negative (0x80000000), skip - # the first bit search. -+#else -+ BLTId r5,$LaDIV2 # If r5 is still negative (0x80000000), skip -+ # the first bit search. -+#endif - ADDIK r29,r0,32 # Initialize the loop count - # First part try to find the first '1' in the r5 - $LaDIV1: - ADD r5,r5,r5 # left shift logical r5 -- BGEID r5,$LaDIV1 # -+#ifdef __arch64__ -+ BEAGEID r5,$LaDIV1 # -+#else -+ BGEID r5,$LaDIV1 # -+#endif - ADDIK r29,r29,-1 - $LaDIV2: - ADD r5,r5,r5 # left shift logical r5 get the '1' into the Carry - ADDC r3,r3,r3 # Move that bit into the Mod register - rSUB r31,r6,r3 # Try to subtract (r30 a r6) -+#ifdef __arch64__ -+ BEALTi r31,$LaMOD_TOO_SMALL -+#else - BLTi r31,$LaMOD_TOO_SMALL -+#endif - OR r3,r0,r31 # Move the r31 to mod since the result was positive - ADDIK r30,r30,1 - $LaMOD_TOO_SMALL: - ADDIK r29,r29,-1 -+#ifdef __arch64__ -+ BEAEQi r29,$LaLOOP_END -+ ADD r30,r30,r30 # Shift in the '1' into div -+ BREAI $LaDIV2 # Div2 -+$LaLOOP_END: -+ BEAGEI r28,$LaRETURN_HERE -+ BREAId $LaRETURN_HERE -+#else - BEQi r29,$LaLOOP_END - ADD r30,r30,r30 # Shift in the '1' into div - BRI $LaDIV2 # Div2 - $LaLOOP_END: - BGEI r28,$LaRETURN_HERE - BRId $LaRETURN_HERE -+#endif - rsubi r3,r3,0 # Negate the result - $LaDiv_By_Zero: - $LaResult_Is_Zero: -@@ -108,7 +140,7 @@ $LaRETURN_HERE: - lli r29,r1,8 - lli r30,r1,16 - lli r31,r1,24 -- addik r1,r1,32 -+ addlik r1,r1,32 - rtsd r15,8 - nop - #else -diff --git a/libgcc/config/microblaze/mulsi3.S b/libgcc/config/microblaze/mulsi3.S -index 31a73c2..39951be 100644 ---- a/libgcc/config/microblaze/mulsi3.S -+++ b/libgcc/config/microblaze/mulsi3.S -@@ -43,7 +43,37 @@ - .type __mulsi3,@function - #ifdef __arch64__ - .align 3 --#endif -+__mulsi3: -+ .frame r1,0,r15 -+ add r3,r0,r0 -+ BEAEQI r5,$L_Result_Is_Zero # Multiply by Zero -+ BEAEQI r6,$L_Result_Is_Zero # Multiply by Zero -+ BEAGEId r5,$L_R5_Pos -+ XOR r4,r5,r6 # Get the sign of the result -+ RSUBI r5,r5,0 # Make r5 positive -+$L_R5_Pos: -+ BEAGEI r6,$L_R6_Pos -+ RSUBI r6,r6,0 # Make r6 positive -+$L_R6_Pos: -+ breai $L1 -+$L2: -+ add r5,r5,r5 -+$L1: -+ srl r6,r6 -+ addc r7,r0,r0 -+ beaeqi r7,$L2 -+ beaneid r6,$L2 -+ add r3,r3,r5 -+ bealti r4,$L_NegateResult -+ rtsd r15,8 -+ nop -+$L_NegateResult: -+ rtsd r15,8 -+ rsub r3,r3,r0 -+$L_Result_Is_Zero: -+ rtsd r15,8 -+ addi r3,r0,0 -+#else - __mulsi3: - .frame r1,0,r15 - add r3,r0,r0 -@@ -74,5 +104,6 @@ $L_NegateResult: - $L_Result_Is_Zero: - rtsd r15,8 - addi r3,r0,0 -+#endif - .end __mulsi3 - .size __mulsi3, . - __mulsi3 -diff --git a/libgcc/config/microblaze/udivsi3.S b/libgcc/config/microblaze/udivsi3.S -index 94adb6a..d4fe285 100644 ---- a/libgcc/config/microblaze/udivsi3.S -+++ b/libgcc/config/microblaze/udivsi3.S -@@ -59,52 +59,96 @@ __udivsi3: - SWI r30,r1,4 - SWI r31,r1,8 - #endif -+#ifdef __arch64__ -+ BEAEQI r6,$LaDiv_By_Zero # Div_by_Zero # Division Error -+ BEAEQID r5,$LaResult_Is_Zero # Result is Zero -+#else - BEQI r6,$LaDiv_By_Zero # Div_by_Zero # Division Error - BEQID r5,$LaResult_Is_Zero # Result is Zero -+#endif - ADDIK r30,r0,0 # Clear mod - ADDIK r29,r0,32 # Initialize the loop count - - # Check if r6 and r5 are equal # if yes, return 1 - RSUB r18,r5,r6 -+#ifdef __arch64__ -+ BEAEQID r18,$LaRETURN_HERE -+#else - BEQID r18,$LaRETURN_HERE -+#endif - ADDIK r3,r0,1 - - # Check if (uns)r6 is greater than (uns)r5. In that case, just return 0 - XOR r18,r5,r6 -- BGEID r18,16 -+#ifdef __arch64__ -+ BEAGEID r18,16 -+#else -+ BGEID r18,16 -+#endif - ADD r3,r0,r0 # We would anyways clear r3 -+#ifdef __arch64__ -+ BEALTI r6,$LaRETURN_HERE # r6[bit 31 = 1] hence is greater -+ BREAI $LCheckr6 -+ RSUB r18,r6,r5 # MICROBLAZEcmp -+ BEALTI r18,$LaRETURN_HERE -+#else - BLTI r6,$LaRETURN_HERE # r6[bit 31 = 1] hence is greater - BRI $LCheckr6 - RSUB r18,r6,r5 # MICROBLAZEcmp - BLTI r18,$LaRETURN_HERE -- -+#endif - # If r6 [bit 31] is set, then return result as 1 - $LCheckr6: -- BGTI r6,$LaDIV0 -- BRID $LaRETURN_HERE -+#ifdef __arch64__ -+ BEAGTI r6,$LaDIV0 -+ BREAID $LaRETURN_HERE -+#else -+ BGTI r6,$LaDIV0 -+ BRID $LaRETURN_HERE -+#endif - ADDIK r3,r0,1 - - # First part try to find the first '1' in the r5 - $LaDIV0: -+#ifdef __arch64__ -+ BEALTI r5,$LaDIV2 -+#else - BLTI r5,$LaDIV2 -+#endif - $LaDIV1: - ADD r5,r5,r5 # left shift logical r5 -+#ifdef __arch64__ -+ BEAGTID r5,$LaDIV1 -+#else - BGTID r5,$LaDIV1 -+#endif - ADDIK r29,r29,-1 - $LaDIV2: - ADD r5,r5,r5 # left shift logical r5 get the '1' into the Carry - ADDC r30,r30,r30 # Move that bit into the Mod register - RSUB r31,r6,r30 # Try to subtract (r30 a r6) -+#ifdef __arch64__ -+ BEALTI r31,$LaMOD_TOO_SMALL -+#else - BLTI r31,$LaMOD_TOO_SMALL -+#endif - OR r30,r0,r31 # Move the r31 to mod since the result was positive - ADDIK r3,r3,1 - $LaMOD_TOO_SMALL: - ADDIK r29,r29,-1 -+#ifdef __arch64__ -+ BEAEQi r29,$LaLOOP_END -+ ADD r3,r3,r3 # Shift in the '1' into div -+ BREAI $LaDIV2 # Div2 -+$LaLOOP_END: -+ BREAI $LaRETURN_HERE -+#else - BEQi r29,$LaLOOP_END - ADD r3,r3,r3 # Shift in the '1' into div - BRI $LaDIV2 # Div2 - $LaLOOP_END: - BRI $LaRETURN_HERE -+#endif - $LaDiv_By_Zero: - $LaResult_Is_Zero: - OR r3,r0,r0 # set result to 0 -@@ -115,7 +159,7 @@ $LaRETURN_HERE: - LLI r29,r1,0 - LLI r30,r1,8 - LLI r31,r1,16 -- ADDIK r1,r1,24 -+ ADDLIK r1,r1,24 - RTSD r15,8 - NOP - #else -diff --git a/libgcc/config/microblaze/umodsi3.S b/libgcc/config/microblaze/umodsi3.S -index 9bf65c3..3bd5d48 100644 ---- a/libgcc/config/microblaze/umodsi3.S -+++ b/libgcc/config/microblaze/umodsi3.S -@@ -46,7 +46,7 @@ - __umodsi3: - .frame r1,0,r15 - -- addik r1,r1,-24 -+ addlik r1,r1,-24 - sli r29,r1,0 - sli r30,r1,8 - sli r31,r1,16 -@@ -59,27 +59,77 @@ __umodsi3: - swi r30,r1,4 - swi r31,r1,8 - #endif -+#ifdef __arch64__ -+ BEAEQI r6,$LaDiv_By_Zero # Div_by_Zero # Division Error -+ BEAEQId r5,$LaResult_Is_Zero # Result is Zero -+#else - BEQI r6,$LaDiv_By_Zero # Div_by_Zero # Division Error - BEQId r5,$LaResult_Is_Zero # Result is Zero -+#endif - ADDIK r3,r0,0 # Clear div - ADDIK r30,r0,0 # clear mod - ADDIK r29,r0,32 # Initialize the loop count - - # Check if r6 and r5 are equal # if yes, return 0 - rsub r18,r5,r6 -- beqi r18,$LaRETURN_HERE - -+#ifdef __arch64__ -+ beaeqi r18,$LaRETURN_HERE -+#else -+ beqi r18,$LaRETURN_HERE -+#endif - # Check if (uns)r6 is greater than (uns)r5. In that case, just return r5 - xor r18,r5,r6 -+#ifdef __arch64__ -+ beageid r18,16 -+ addik r3,r5,0 -+ bealti r6,$LaRETURN_HERE -+ breai $LCheckr6 -+ rsub r18,r5,r6 # MICROBLAZEcmp -+ beagti r18,$LaRETURN_HERE -+#else - bgeid r18,16 - addik r3,r5,0 - blti r6,$LaRETURN_HERE - bri $LCheckr6 - rsub r18,r5,r6 # MICROBLAZEcmp - bgti r18,$LaRETURN_HERE -- -+#endif - # If r6 [bit 31] is set, then return result as r5-r6 - $LCheckr6: -+#ifdef __arch64__ -+ beagtid r6,$LaDIV0 -+ addik r3,r0,0 -+ addik r18,r0,0x7fffffff -+ and r5,r5,r18 -+ and r6,r6,r18 -+ breaid $LaRETURN_HERE -+ rsub r3,r6,r5 -+# First part: try to find the first '1' in the r5 -+$LaDIV0: -+ BEALTI r5,$LaDIV2 -+$LaDIV1: -+ ADD r5,r5,r5 # left shift logical r5 -+ BEAGEID r5,$LaDIV1 # -+ ADDIK r29,r29,-1 -+$LaDIV2: -+ ADD r5,r5,r5 # left shift logical r5 get the '1' into the Carry -+ ADDC r3,r3,r3 # Move that bit into the Mod register -+ rSUB r31,r6,r3 # Try to subtract (r3 a r6) -+ BEALTi r31,$LaMOD_TOO_SMALL -+ OR r3,r0,r31 # Move the r31 to mod since the result was positive -+ ADDIK r30,r30,1 -+$LaMOD_TOO_SMALL: -+ ADDIK r29,r29,-1 -+ BEAEQi r29,$LaLOOP_END -+ ADD r30,r30,r30 # Shift in the '1' into div -+ BREAI $LaDIV2 # Div2 -+$LaLOOP_END: -+ BREAI $LaRETURN_HERE -+$LaDiv_By_Zero: -+$LaResult_Is_Zero: -+ or r3,r0,r0 # set result to 0 -+#else - bgtid r6,$LaDIV0 - addik r3,r0,0 - addik r18,r0,0x7fffffff -@@ -111,7 +161,7 @@ $LaLOOP_END: - $LaDiv_By_Zero: - $LaResult_Is_Zero: - or r3,r0,r0 # set result to 0 -- -+#endif - #ifdef __arch64__ - $LaRETURN_HERE: - # Restore values of CSRs and that of r3 and the divisor and the dividend --- -2.7.4 - diff --git a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0061-Author-Nagaraju-nmekala-xilinx.com.patch b/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0061-Author-Nagaraju-nmekala-xilinx.com.patch deleted file mode 100644 index 690bc727..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0061-Author-Nagaraju-nmekala-xilinx.com.patch +++ /dev/null @@ -1,479 +0,0 @@ -From e1b8cfe6c0b4a0bd90ecbd3e85ae7114df21b6cc Mon Sep 17 00:00:00 2001 -From: Nagaraju <nmekala@xilinx.com> -Date: Thu, 18 Apr 2019 16:00:37 +0530 -Subject: [PATCH 61/62] Author: Nagaraju <nmekala@xilinx.com> Date: Wed Apr - 17 14:11:00 2019 +0530 - - [Patch, microblaze]: MB-64 removal of barrel-shift instructions from default - By default MB-64 is generatting barrel-shift instructions. It has been - removed from default. Barrel-shift instructions will be generated only if - barrel-shifter is enabled. Similarly to double instructions as well. - - Signed-off-by :Nagaraju Mekala <nmekala@xilix.com> ---- - gcc/config/microblaze/microblaze.c | 2 +- - gcc/config/microblaze/microblaze.md | 269 +++++++++++++++++++++++++++++++++--- - 2 files changed, 252 insertions(+), 19 deletions(-) - -diff --git a/gcc/config/microblaze/microblaze.c b/gcc/config/microblaze/microblaze.c -index 33d183e..c321b03 100644 ---- a/gcc/config/microblaze/microblaze.c -+++ b/gcc/config/microblaze/microblaze.c -@@ -3868,7 +3868,7 @@ microblaze_expand_divide (rtx operands[]) - emit_insn (gen_rtx_CLOBBER (Pmode, reg18)); - - if (TARGET_MB_64) { -- emit_insn (gen_ashldi3_long (regt1, operands[1], GEN_INT(4))); -+ emit_insn (gen_ashldi3 (regt1, operands[1], GEN_INT(4))); - emit_insn (gen_adddi3 (regt1, regt1, operands[2])); - } - else { -diff --git a/gcc/config/microblaze/microblaze.md b/gcc/config/microblaze/microblaze.md -index 8bd175f..b5b60fb 100644 ---- a/gcc/config/microblaze/microblaze.md -+++ b/gcc/config/microblaze/microblaze.md -@@ -545,7 +545,7 @@ - [(set (match_operand:DF 0 "register_operand" "=d") - (plus:DF (match_operand:DF 1 "register_operand" "d") - (match_operand:DF 2 "register_operand" "d")))] -- "TARGET_MB_64" -+ "TARGET_MB_64 && TARGET_HARD_FLOAT && TARGET_FLOAT_CONVERT" - "dadd\t%0,%1,%2" - [(set_attr "type" "fadd") - (set_attr "mode" "DF") -@@ -555,7 +555,7 @@ - [(set (match_operand:DF 0 "register_operand" "=d") - (minus:DF (match_operand:DF 1 "register_operand" "d") - (match_operand:DF 2 "register_operand" "d")))] -- "TARGET_MB_64" -+ "TARGET_MB_64 && TARGET_HARD_FLOAT && TARGET_FLOAT_CONVERT" - "drsub\t%0,%2,%1" - [(set_attr "type" "frsub") - (set_attr "mode" "DF") -@@ -565,7 +565,7 @@ - [(set (match_operand:DF 0 "register_operand" "=d") - (mult:DF (match_operand:DF 1 "register_operand" "d") - (match_operand:DF 2 "register_operand" "d")))] -- "TARGET_MB_64" -+ "TARGET_MB_64 && TARGET_HARD_FLOAT && TARGET_FLOAT_CONVERT" - "dmul\t%0,%1,%2" - [(set_attr "type" "fmul") - (set_attr "mode" "DF") -@@ -575,7 +575,7 @@ - [(set (match_operand:DF 0 "register_operand" "=d") - (div:DF (match_operand:DF 1 "register_operand" "d") - (match_operand:DF 2 "register_operand" "d")))] -- "TARGET_MB_64" -+ "TARGET_MB_64 && TARGET_HARD_FLOAT && TARGET_FLOAT_CONVERT" - "ddiv\t%0,%2,%1" - [(set_attr "type" "fdiv") - (set_attr "mode" "DF") -@@ -585,7 +585,7 @@ - (define_insn "sqrtdf2" - [(set (match_operand:DF 0 "register_operand" "=d") - (sqrt:DF (match_operand:DF 1 "register_operand" "d")))] -- "TARGET_MB_64" -+ "TARGET_MB_64 && TARGET_HARD_FLOAT && TARGET_FLOAT_CONVERT" - "dsqrt\t%0,%1" - [(set_attr "type" "fsqrt") - (set_attr "mode" "DF") -@@ -594,7 +594,7 @@ - (define_insn "floatdidf2" - [(set (match_operand:DF 0 "register_operand" "=d") - (float:DF (match_operand:DI 1 "register_operand" "d")))] -- "TARGET_MB_64" -+ "TARGET_MB_64 && TARGET_HARD_FLOAT && TARGET_FLOAT_CONVERT" - "dbl\t%0,%1" - [(set_attr "type" "fcvt") - (set_attr "mode" "DF") -@@ -603,7 +603,7 @@ - (define_insn "fix_truncdfdi2" - [(set (match_operand:DI 0 "register_operand" "=d") - (fix:DI (fix:DF (match_operand:DF 1 "register_operand" "d"))))] -- "TARGET_MB_64" -+ "TARGET_MB_64 && TARGET_HARD_FLOAT && TARGET_FLOAT_CONVERT" - "dlong\t%0,%1" - [(set_attr "type" "fcvt") - (set_attr "mode" "DI") -@@ -1299,6 +1299,34 @@ - (set_attr "mode" "DI") - (set_attr "length" "4")]) - -+(define_insn "*movdi_internal2_bshift" -+ [(set (match_operand:DI 0 "nonimmediate_operand" "=d,d,d, d,d,R,m") -+ (match_operand:DI 1 "move_src_operand" " d,I,Mnis,R,m,dJ,dJ"))] -+ "TARGET_MB_64 && TARGET_BARREL_SHIFT" -+ { -+ switch (which_alternative) -+ { -+ case 0: -+ return "addlk\t%0,%1,r0"; -+ case 1: -+ case 2: -+ if (GET_CODE (operands[1]) == CONST_INT && -+ (INTVAL (operands[1]) > (long long)549755813887 || INTVAL (operands[1]) < (long long)-549755813888)) -+ return "addlik\t%0,r0,%h1\n\tbsllli\t%0,%0,32\n\taddlik\t%0,%0,%j1 #li => la"; -+ else -+ return "addlik\t%0,r0,%1"; -+ case 3: -+ case 4: -+ return "ll%i1\t%0,%1"; -+ case 5: -+ case 6: -+ return "sl%i0\t%z1,%0"; -+ } -+ } -+ [(set_attr "type" "load,no_delay_load,no_delay_load,no_delay_load,no_delay_load,no_delay_store,no_delay_store") -+ (set_attr "mode" "DI") -+ (set_attr "length" "4,4,12,4,8,4,8")]) -+ - (define_insn "*movdi_internal2" - [(set (match_operand:DI 0 "nonimmediate_operand" "=d,d,d, d,d,R,m") - (match_operand:DI 1 "move_src_operand" " d,I,Mnis,R,m,dJ,dJ"))] -@@ -1312,7 +1340,15 @@ - case 2: - if (GET_CODE (operands[1]) == CONST_INT && - (INTVAL (operands[1]) > (long long)549755813887 || INTVAL (operands[1]) < (long long)-549755813888)) -- return "addlik\t%0,r0,%h1\n\tbsllli\t%0,%0,32\n\taddlik\t%0,%0,%j1 #li => la"; -+ { -+ operands[2] = gen_rtx_REG (DImode, MB_ABI_ASM_TEMP_REGNUM); -+ output_asm_insn ("addlik\t%0,r0,%h1", operands); -+ output_asm_insn ("addlik\t%2,r0,32", operands); -+ output_asm_insn ("addlik\t%2,%2,-1", operands); -+ output_asm_insn ("beaneid\t%2,.-8", operands); -+ output_asm_insn ("addlk\t%0,%0,%0", operands); -+ return "addlik\t%0,%0,%j1 #li => la"; -+ } - else - return "addlik\t%0,r0,%1"; - case 3: -@@ -1386,7 +1422,7 @@ - (define_insn "movdi_long_int" - [(set (match_operand:DI 0 "nonimmediate_operand" "=d") - (match_operand:DI 1 "general_operand" "i"))] -- "TARGET_MB_64" -+ "TARGET_MB_64 && TARGET_BARREL_SHIFT" - "addlik\t%0,r0,%h1\n\tbsllli\t%0,%0,32\n\taddlik\t%0,%0,%j1 #li => la"; - [(set_attr "type" "no_delay_arith") - (set_attr "mode" "DI") -@@ -1653,6 +1689,33 @@ - ;; movdf_internal - ;; Applies to both TARGET_SOFT_FLOAT and TARGET_HARD_FLOAT - ;; -+(define_insn "*movdf_internal_64_bshift" -+ [(set (match_operand:DF 0 "nonimmediate_operand" "=d,d,d,d,d,m") -+ (match_operand:DF 1 "general_operand" "d,dG,m,F,T,d"))] -+ "TARGET_MB_64 && TARGET_BARREL_SHIFT" -+ { -+ switch (which_alternative) -+ { -+ case 0: -+ return "addlk\t%0,%1,r0"; -+ case 1: -+ return "addlk\t%0,r0,r0"; -+ case 2: -+ case 4: -+ return "ll%i1\t%0,%1"; -+ case 3: -+ { -+ return "addlik\t%0,r0,%j1 \n\tbsllli\t%0,%0,32\n\taddlik\t%0,%0,%h1 #Xfer Lo"; -+ } -+ case 5: -+ return "sl%i0\t%1,%0"; -+ } -+ gcc_unreachable (); -+ } -+ [(set_attr "type" "no_delay_move,no_delay_move,no_delay_load,no_delay_load,no_delay_load,no_delay_store") -+ (set_attr "mode" "DF") -+ (set_attr "length" "4,4,4,16,4,4")]) -+ - (define_insn "*movdf_internal_64" - [(set (match_operand:DF 0 "nonimmediate_operand" "=d,d,d,d,d,m") - (match_operand:DF 1 "general_operand" "d,dG,m,F,T,d"))] -@@ -1669,7 +1732,13 @@ - return "ll%i1\t%0,%1"; - case 3: - { -- return "addlik\t%0,r0,%j1 \n\tbsllli\t%0,%0,32\n\taddlik\t%0,%0,%h1 #Xfer Lo"; -+ operands[2] = gen_rtx_REG (DImode, MB_ABI_ASM_TEMP_REGNUM); -+ output_asm_insn ("addlik\t%0,r0,%h1", operands); -+ output_asm_insn ("addlik\t%2,r0,32", operands); -+ output_asm_insn ("addlik\t%2,%2,-1", operands); -+ output_asm_insn ("beaneid\t%2,.-8", operands); -+ output_asm_insn ("addlk\t%0,%0,%0", operands); -+ return "addlik\t%0,%0,%j1 #li => la"; - } - case 5: - return "sl%i0\t%1,%0"; -@@ -1789,11 +1858,21 @@ - "TARGET_MB_64" - { - ;;if (CONST_INT_P (operands[2]) && INTVAL (operands[2]) > 0 && INTVAL (operands[2]) < 65) --if (INTVAL (operands[2]) > 0 && INTVAL (operands[2]) < 65) -+if (INTVAL (operands[2]) > 0 && INTVAL (operands[2]) < 65 && TARGET_BARREL_SHIFT) - { - emit_insn(gen_ashldi3_long (operands[0], operands[1],operands[2])); - DONE; - } -+else if(INTVAL (operands[2]) > 0 && INTVAL (operands[2]) < 65 && CONST_INT_P (operands[2])) -+ { -+ emit_insn(gen_ashldi3_const (operands[0], operands[1],operands[2])); -+ DONE; -+ } -+else if(INTVAL (operands[2]) > 0 && INTVAL (operands[2]) < 65 && GET_CODE (operands[2]) == REG) -+ { -+ emit_insn(gen_ashldi3_reg (operands[0], operands[1],operands[2])); -+ DONE; -+ } - else - FAIL; - } -@@ -1803,7 +1882,7 @@ else - [(set (match_operand:DI 0 "register_operand" "=d,d") - (ashift:DI (match_operand:DI 1 "register_operand" "d,d") - (match_operand:DI 2 "arith_operand" "I,d")))] -- "TARGET_MB_64" -+ "TARGET_MB_64 && TARGET_BARREL_SHIFT" - "@ - bsllli\t%0,%1,%2 - bslll\t%0,%1,%2" -@@ -1811,6 +1890,51 @@ else - (set_attr "mode" "DI,DI") - (set_attr "length" "4,4")] - ) -+ -+(define_insn "ashldi3_const" -+ [(set (match_operand:DI 0 "register_operand" "=&d") -+ (ashift:DI (match_operand:DI 1 "register_operand" "d") -+ (match_operand:DI 2 "immediate_operand" "I")))] -+ "TARGET_MB_64" -+ { -+ operands[3] = gen_rtx_REG (DImode, MB_ABI_ASM_TEMP_REGNUM); -+ -+ output_asm_insn ("orli\t%3,r0,%2", operands); -+ if (REGNO (operands[0]) != REGNO (operands[1])) -+ output_asm_insn ("addlk\t%0,%1,r0", operands); -+ -+ output_asm_insn ("addlik\t%3,%3,-1", operands); -+ output_asm_insn ("beaneid\t%3,.-8", operands); -+ return "addlk\t%0,%0,%0"; -+ } -+ [(set_attr "type" "multi") -+ (set_attr "mode" "DI") -+ (set_attr "length" "20")] -+) -+ -+(define_insn "ashldi3_reg" -+ [(set (match_operand:DI 0 "register_operand" "=&d") -+ (ashift:DI (match_operand:DI 1 "register_operand" "d") -+ (match_operand:DI 2 "register_operand" "d")))] -+ "TARGET_MB_64" -+ { -+ operands[3] = gen_rtx_REG (DImode, MB_ABI_ASM_TEMP_REGNUM); -+ output_asm_insn ("andli\t%3,%2,31", operands); -+ if (REGNO (operands[0]) != REGNO (operands[1])) -+ output_asm_insn ("addlk\t%0,r0,%1", operands); -+ /* Exit the loop if zero shift. */ -+ output_asm_insn ("beaeqid\t%3,.+24", operands); -+ /* Emit the loop. */ -+ output_asm_insn ("addlk\t%0,%0,r0", operands); -+ output_asm_insn ("addlik\t%3,%3,-1", operands); -+ output_asm_insn ("beaneid\t%3,.-8", operands); -+ return "addlk\t%0,%0,%0"; -+ } -+ [(set_attr "type" "multi") -+ (set_attr "mode" "DI") -+ (set_attr "length" "28")] -+) -+ - ;; The following patterns apply when there is no barrel shifter present - - (define_insn "*ashlsi3_with_mul_delay" -@@ -1944,11 +2068,21 @@ else - "TARGET_MB_64" - { - ;;if (CONST_INT_P (operands[2]) && INTVAL (operands[2]) > 0 && INTVAL (operands[2]) < 65) --if (INTVAL (operands[2]) > 0 && INTVAL (operands[2]) < 65) -+if (INTVAL (operands[2]) > 0 && INTVAL (operands[2]) < 65 && TARGET_BARREL_SHIFT) - { - emit_insn(gen_ashrdi3_long (operands[0], operands[1],operands[2])); - DONE; - } -+else if(INTVAL (operands[2]) > 0 && INTVAL (operands[2]) < 65 && CONST_INT_P (operands[2])) -+ { -+ emit_insn(gen_ashrdi3_const (operands[0], operands[1],operands[2])); -+ DONE; -+ } -+else if(INTVAL (operands[2]) > 0 && INTVAL (operands[2]) < 65 && GET_CODE (operands[2]) == REG) -+ { -+ emit_insn(gen_ashrdi3_reg (operands[0], operands[1],operands[2])); -+ DONE; -+ } - else - FAIL; - } -@@ -1958,7 +2092,7 @@ else - [(set (match_operand:DI 0 "register_operand" "=d,d") - (ashiftrt:DI (match_operand:DI 1 "register_operand" "d,d") - (match_operand:DI 2 "arith_operand" "I,d")))] -- "TARGET_MB_64" -+ "TARGET_MB_64 && TARGET_BARREL_SHIFT" - "@ - bslrai\t%0,%1,%2 - bslra\t%0,%1,%2" -@@ -1966,6 +2100,51 @@ else - (set_attr "mode" "DI,DI") - (set_attr "length" "4,4")] - ) -+ -+(define_insn "ashrdi3_const" -+ [(set (match_operand:DI 0 "register_operand" "=&d") -+ (ashiftrt:DI (match_operand:DI 1 "register_operand" "d") -+ (match_operand:DI 2 "immediate_operand" "I")))] -+ "TARGET_MB_64" -+ { -+ operands[3] = gen_rtx_REG (DImode, MB_ABI_ASM_TEMP_REGNUM); -+ -+ output_asm_insn ("orli\t%3,r0,%2", operands); -+ if (REGNO (operands[0]) != REGNO (operands[1])) -+ output_asm_insn ("addlk\t%0,%1,r0", operands); -+ -+ output_asm_insn ("addlik\t%3,%3,-1", operands); -+ output_asm_insn ("beaneid\t%3,.-8", operands); -+ return "srla\t%0,%0"; -+ } -+ [(set_attr "type" "arith") -+ (set_attr "mode" "DI") -+ (set_attr "length" "20")] -+) -+ -+(define_insn "ashrdi3_reg" -+ [(set (match_operand:DI 0 "register_operand" "=&d") -+ (ashiftrt:DI (match_operand:DI 1 "register_operand" "d") -+ (match_operand:DI 2 "register_operand" "d")))] -+ "TARGET_MB_64" -+ { -+ operands[3] = gen_rtx_REG (DImode, MB_ABI_ASM_TEMP_REGNUM); -+ output_asm_insn ("andli\t%3,%2,31", operands); -+ if (REGNO (operands[0]) != REGNO (operands[1])) -+ output_asm_insn ("addlk\t%0,r0,%1", operands); -+ /* Exit the loop if zero shift. */ -+ output_asm_insn ("beaeqid\t%3,.+24", operands); -+ /* Emit the loop. */ -+ output_asm_insn ("addlk\t%0,%0,r0", operands); -+ output_asm_insn ("addlik\t%3,%3,-1", operands); -+ output_asm_insn ("beaneid\t%3,.-8", operands); -+ return "srla\t%0,%0"; -+ } -+ [(set_attr "type" "multi") -+ (set_attr "mode" "DI") -+ (set_attr "length" "28")] -+) -+ - (define_expand "ashrsi3" - [(set (match_operand:SI 0 "register_operand" "=&d") - (ashiftrt:SI (match_operand:SI 1 "register_operand" "d") -@@ -2083,11 +2262,21 @@ else - "TARGET_MB_64" - { - ;;if (CONST_INT_P (operands[2]) && INTVAL (operands[2]) > 0 && INTVAL (operands[2]) < 65) --if (INTVAL (operands[2]) > 0 && INTVAL (operands[2]) < 65) -+if (INTVAL (operands[2]) > 0 && INTVAL (operands[2]) < 65 && TARGET_BARREL_SHIFT) - { - emit_insn(gen_lshrdi3_long (operands[0], operands[1],operands[2])); - DONE; - } -+else if(INTVAL (operands[2]) > 0 && INTVAL (operands[2]) < 65 && CONST_INT_P (operands[2])) -+ { -+ emit_insn(gen_lshrdi3_const (operands[0], operands[1],operands[2])); -+ DONE; -+ } -+else if(INTVAL (operands[2]) > 0 && INTVAL (operands[2]) < 65 && GET_CODE (operands[2]) == REG) -+ { -+ emit_insn(gen_lshrdi3_reg (operands[0], operands[1],operands[2])); -+ DONE; -+ } - else - FAIL; - } -@@ -2097,7 +2286,7 @@ else - [(set (match_operand:DI 0 "register_operand" "=d,d") - (lshiftrt:DI (match_operand:DI 1 "register_operand" "d,d") - (match_operand:DI 2 "arith_operand" "I,d")))] -- "TARGET_MB_64" -+ "TARGET_MB_64 && TARGET_BARREL_SHIFT" - "@ - bslrli\t%0,%1,%2 - bslrl\t%0,%1,%2" -@@ -2106,6 +2295,50 @@ else - (set_attr "length" "4,4")] - ) - -+(define_insn "lshrdi3_const" -+ [(set (match_operand:DI 0 "register_operand" "=&d") -+ (lshiftrt:DI (match_operand:DI 1 "register_operand" "d") -+ (match_operand:DI 2 "immediate_operand" "I")))] -+ "TARGET_MB_64" -+ { -+ operands[3] = gen_rtx_REG (DImode, MB_ABI_ASM_TEMP_REGNUM); -+ -+ output_asm_insn ("orli\t%3,r0,%2", operands); -+ if (REGNO (operands[0]) != REGNO (operands[1])) -+ output_asm_insn ("addlk\t%0,%1,r0", operands); -+ -+ output_asm_insn ("addlik\t%3,%3,-1", operands); -+ output_asm_insn ("beaneid\t%3,.-8", operands); -+ return "srll\t%0,%0"; -+ } -+ [(set_attr "type" "multi") -+ (set_attr "mode" "DI") -+ (set_attr "length" "20")] -+) -+ -+(define_insn "lshrdi3_reg" -+ [(set (match_operand:DI 0 "register_operand" "=&d") -+ (lshiftrt:DI (match_operand:DI 1 "register_operand" "d") -+ (match_operand:DI 2 "register_operand" "d")))] -+ "TARGET_MB_64" -+ { -+ operands[3] = gen_rtx_REG (DImode, MB_ABI_ASM_TEMP_REGNUM); -+ output_asm_insn ("andli\t%3,%2,31", operands); -+ if (REGNO (operands[0]) != REGNO (operands[1])) -+ output_asm_insn ("addlk\t%0,r0,%1", operands); -+ /* Exit the loop if zero shift. */ -+ output_asm_insn ("beaeqid\t%3,.+24", operands); -+ /* Emit the loop. */ -+ output_asm_insn ("addlk\t%0,%0,r0", operands); -+ output_asm_insn ("addlik\t%3,%3,-1", operands); -+ output_asm_insn ("beaneid\t%3,.-8", operands); -+ return "srll\t%0,%0"; -+ } -+ [(set_attr "type" "multi") -+ (set_attr "mode" "SI") -+ (set_attr "length" "28")] -+) -+ - (define_expand "lshrsi3" - [(set (match_operand:SI 0 "register_operand" "=&d") - (lshiftrt:SI (match_operand:SI 1 "register_operand" "d") -@@ -2233,7 +2466,7 @@ else - (eq:DI - (match_operand:DI 1 "register_operand" "d") - (match_operand:DI 2 "register_operand" "d")))] -- "TARGET_MB_64" -+ "TARGET_MB_64 && TARGET_PATTERN_COMPARE" - "pcmpleq\t%0,%1,%2" - [(set_attr "type" "arith") - (set_attr "mode" "DI") -@@ -2245,7 +2478,7 @@ else - (ne:DI - (match_operand:DI 1 "register_operand" "d") - (match_operand:DI 2 "register_operand" "d")))] -- "TARGET_MB_64" -+ "TARGET_MB_64 && TARGET_PATTERN_COMPARE" - "pcmplne\t%0,%1,%2" - [(set_attr "type" "arith") - (set_attr "mode" "DI") --- -2.7.4 - diff --git a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0062-Patch-microblaze-Add-TARGET_OPTION_OPTIMIZATION-and-.patch b/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0062-Patch-microblaze-Add-TARGET_OPTION_OPTIMIZATION-and-.patch deleted file mode 100644 index e7dfa89c..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-8/0062-Patch-microblaze-Add-TARGET_OPTION_OPTIMIZATION-and-.patch +++ /dev/null @@ -1,41 +0,0 @@ -From 612e6579116e6714417ea21e6c13b0968bb6aac2 Mon Sep 17 00:00:00 2001 -From: Nagaraju <nmekala@xilinx.com> -Date: Wed, 8 May 2019 14:12:03 +0530 -Subject: [PATCH 62/62] [Patch, microblaze]: Add TARGET_OPTION_OPTIMIZATION and - disable fivopts by default - -Added TARGET_OPTION_OPTIMIZATIONS and Turn off ivopts by default. - - * gcc/common/config/microblaze/microblaze-common.c - (microblaze_option_optimization_table): Disable fivopts by default. - -Signed-off-by: Nagaraju Mekala <nmekala@xilinx.com> ---- - gcc/common/config/microblaze/microblaze-common.c | 6 ++++-- - 1 file changed, 4 insertions(+), 2 deletions(-) - -diff --git a/gcc/common/config/microblaze/microblaze-common.c b/gcc/common/config/microblaze/microblaze-common.c -index fe45f2e..2873d4b 100644 ---- a/gcc/common/config/microblaze/microblaze-common.c -+++ b/gcc/common/config/microblaze/microblaze-common.c -@@ -27,13 +27,15 @@ - /* Implement TARGET_OPTION_OPTIMIZATION_TABLE. */ - static const struct default_options microblaze_option_optimization_table[] = - { -- /* Turn off ivopts by default. It messes up cse. */ -+ /* Turn off ivopts by default. It messes up cse. -+ { OPT_LEVELS_1_PLUS, OPT_fomit_frame_pointer, NULL, 1 }, */ - { OPT_LEVELS_ALL, OPT_fivopts, NULL, 0 }, -- { OPT_LEVELS_1_PLUS, OPT_fomit_frame_pointer, NULL, 1 }, - { OPT_LEVELS_NONE, 0, NULL, 0 } - }; - - #undef TARGET_DEFAULT_TARGET_FLAGS - #define TARGET_DEFAULT_TARGET_FLAGS TARGET_DEFAULT - -+#undef TARGET_OPTION_OPTIMIZATION_TABLE -+#define TARGET_OPTION_OPTIMIZATION_TABLE microblaze_option_optimization_table - struct gcc_targetm_common targetm_common = TARGETM_COMMON_INITIALIZER; --- -2.7.4 - diff --git a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-source_8.%.bbappend b/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-source_8.%.bbappend deleted file mode 100644 index d6a81912..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-source_8.%.bbappend +++ /dev/null @@ -1,65 +0,0 @@ -# Add MicroBlaze Patches (only when using MicroBlaze) -FILESEXTRAPATHS_append_microblaze := "${THISDIR}/gcc-8:" -SRC_URI_append_microblaze = " \ -file://0001-LOCAL-Testsuite-builtins-tests-require-fpic.patch \ - file://0002-LOCAL-Quick-fail-g-.dg-opt-memcpy1.C.patch \ - file://0003-LOCAL-Testsuite-explicitly-add-fivopts-for-tests-tha.patch \ - file://0004-LOCAL-For-dejagnu-static-testing-on-qemu-suppress-wa.patch \ - file://0005-Patch-testsuite-Add-MicroBlaze-to-target-supports-fo.patch \ - file://0006-Patch-testsuite-Update-MicroBlaze-strings-test.patch \ - file://0007-Patch-testsuite-Allow-MicroBlaze-.weakext-pattern-in.patch \ - file://0008-Patch-testsuite-Add-MicroBlaze-to-check_profiling_av.patch \ - file://0009-Patch-microblaze-Fix-atomic-side-effects.patch \ - file://0010-Patch-microblaze-Fix-atomic-boolean-return-value.patch \ - file://0011-Patch-microblaze-Fix-the-Microblaze-crash-with-msmal.patch \ - file://0012-Patch-microblaze-Added-ashrsi3_with_size_opt.patch \ - file://0013-Patch-microblaze-Fixed-missing-save-of-r18-in-fast_i.patch \ - file://0014-Patch-microblaze-Use-bralid-for-profiler-calls.patch \ - file://0015-Patch-microblaze-Disable-fivopts-by-default.patch \ - file://0016-Patch-microblaze-Removed-moddi3-routinue.patch \ - file://0017-Patch-microblaze-Add-INIT_PRIORITY-support.patch \ - file://0018-Patch-microblaze-Add-optimized-lshrsi3.patch \ - file://0019-Patch-microblaze-Modified-trap-instruction.patch \ - file://0020-Patch-microblaze-Reducing-Stack-space-for-arguments.patch \ - file://0021-Patch-microblaze-Add-cbranchsi4_reg.patch \ - file://0022-Patch-microblaze-Inline-Expansion-of-fsqrt-builtin.patch \ - file://0023-Patch-OPT-Update-heuristics-for-loop-invariant-for-a.patch \ - file://0024-PATCH-microblaze.md-Improve-adddi3-and-subdi3-insn-d.patch \ - file://0025-Patch-microblaze-Update-ashlsi3-movsf-patterns.patch \ - file://0026-Patch-microblaze-8-stage-pipeline-for-microblaze.patch \ - file://0027-Patch-rtl-Optimization-Better-register-pressure-esti.patch \ - file://0028-Patch-microblaze-Correct-the-const-high-double-immed.patch \ - file://0029-Fix-microblaze-Fix-internal-compiler-error-with-msma.patch \ - file://0030-patch-microblaze-Fix-the-calculation-of-high-word-in.patch \ - file://0031-Patch-microblaze-Add-new-bit-field-instructions.patch \ - file://0032-Patch-microblaze-Fix-bug-in-MB-version-calculation.patch \ - file://0033-Fixing-the-bug-in-the-bit-field-instruction.patch \ - file://0034-Patch-microblaze-Macros-used-in-Xilinx-internal-patc.patch \ - file://0035-Fixing-the-issue-with-the-builtin_alloc.patch \ - file://0036-Patch-Microblaze-reverting-the-cost-check-before-pro.patch \ - file://0037-Patch-Microblaze-update-in-constraints-for-bitfield-.patch \ - file://0038-Patch-Microblaze-Removed-fsqrt-generation-for-double.patch \ - file://0039-Intial-commit-of-64-bit-Microblaze.patch \ - file://0040-Added-load-store-pattern-movdi-and-also-adding-missi.patch \ - file://0041-Intial-commit-for-64bit-MB-sources.patch \ - file://0042-re-arrangement-of-the-compare-branches.patch \ - file://0043-Patch-Microblaze-previous-commit-broke-the-handling-.patch \ - file://0044-Patch-Microblaze-Support-of-multilibs-with-m64.patch \ - file://0045-Fixed-issues-like.patch \ - file://0046-Fixed-below-issues.patch \ - file://0047-Added-double-arith-instructions.patch \ - file://0048-Fixed-the-issue-in-the-delay-slot-with-swap-instruct.patch \ - file://0049-Fixed-the-load-store-issue-with-the-32bit-arith-libr.patch \ - file://0050-extending-the-Dwarf-support-to-64bit-Microblaze.patch \ - file://0051-fixing-the-typo-errors-in-umodsi3-file.patch \ - file://0052-fixing-the-32bit-LTO-related-issue9-1014024.patch \ - file://0053-Fixed-the-missing-stack-adjustment-in-prologue-of-mo.patch \ - file://0054-Patch-Microblaze-corrected-SPN-for-dlong-instruction.patch \ - file://0055-fixing-the-long-long-long-mingw-toolchain-issue.patch \ - file://0057-Fix-the-MB-64-bug-of-handling-QI-objects.patch \ - file://0058-Patch-Microblaze-We-will-check-the-possibility-of-pe.patch \ - file://0059-Reverting-the-patch-as-kernel-boot-is-not-working-wi.patch \ - file://0060-Patch-MicroBlaze-fixed-typos-in-mul-div-and-mod-asse.patch \ - file://0061-Author-Nagaraju-nmekala-xilinx.com.patch \ - file://0055-microblaze_linker_script_xilinx_ld.patch \ -" diff --git a/meta-xilinx-bsp/recipes-microblaze/gdb/files/0001-Patch-microblaze-Add-wdc.ext.clear-and-wdc.ext.flush.patch b/meta-xilinx-bsp/recipes-microblaze/gdb/files/0001-Patch-microblaze-Add-wdc.ext.clear-and-wdc.ext.flush.patch deleted file mode 100644 index 3575cd7e..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/gdb/files/0001-Patch-microblaze-Add-wdc.ext.clear-and-wdc.ext.flush.patch +++ /dev/null @@ -1,69 +0,0 @@ -From 8ab9a20c73acedbb636a41842a681872af8ae1d6 Mon Sep 17 00:00:00 2001 -From: David Holsgrove <david.holsgrove@xilinx.com> -Date: Wed, 8 May 2013 11:03:36 +1000 -Subject: [PATCH 01/16] [Patch, microblaze]: Add wdc.ext.clear and - wdc.ext.flush insns - -Added two new instructions, wdc.ext.clear and wdc.ext.flush, -to enable MicroBlaze to flush an external cache, which is -used with the new coherency support for multiprocessing. - -Signed-off-by:nagaraju <nmekala@xilix.com> -Signed-off-by: David Holsgrove <david.holsgrove@xilinx.com> -Upstream-Status: Pending ---- - opcodes/microblaze-opc.h | 5 ++++- - opcodes/microblaze-opcm.h | 6 +++--- - 2 files changed, 7 insertions(+), 4 deletions(-) - -diff --git a/opcodes/microblaze-opc.h b/opcodes/microblaze-opc.h -index e3cc1d9..f453097 100644 ---- a/opcodes/microblaze-opc.h -+++ b/opcodes/microblaze-opc.h -@@ -91,6 +91,7 @@ - #define OPCODE_MASK_H3 0xFC000600 /* High 6 bits and bits 21, 22. */ - #define OPCODE_MASK_H32 0xFC00FC00 /* High 6 bits and bit 16-21. */ - #define OPCODE_MASK_H34B 0xFC0000FF /* High 6 bits and low 8 bits. */ -+#define OPCODE_MASK_H35B 0xFC0004FF /* High 6 bits and low 9 bits. */ - #define OPCODE_MASK_H34C 0xFC0007E0 /* High 6 bits and bits 21-26. */ - - /* New Mask for msrset, msrclr insns. */ -@@ -101,7 +102,7 @@ - #define DELAY_SLOT 1 - #define NO_DELAY_SLOT 0 - --#define MAX_OPCODES 289 -+#define MAX_OPCODES 291 - - struct op_code_struct - { -@@ -174,7 +175,9 @@ struct op_code_struct - {"wic", INST_TYPE_R1_R2_SPECIAL, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x90000068, OPCODE_MASK_H34B, wic, special_inst }, - {"wdc", INST_TYPE_R1_R2_SPECIAL, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x90000064, OPCODE_MASK_H34B, wdc, special_inst }, - {"wdc.clear", INST_TYPE_R1_R2_SPECIAL, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x90000066, OPCODE_MASK_H34B, wdcclear, special_inst }, -+ {"wdc.ext.clear", INST_TYPE_R1_R2_SPECIAL, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x90000466, OPCODE_MASK_H35B, wdcextclear, special_inst }, - {"wdc.flush", INST_TYPE_R1_R2_SPECIAL, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x90000074, OPCODE_MASK_H34B, wdcflush, special_inst }, -+ {"wdc.ext.flush", INST_TYPE_R1_R2_SPECIAL, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x90000476, OPCODE_MASK_H35B, wdcextflush, special_inst }, - {"mts", INST_TYPE_SPECIAL_R1, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_MTS, 0x9400C000, OPCODE_MASK_H13S, mts, special_inst }, - {"mfs", INST_TYPE_RD_SPECIAL, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_MFS, 0x94008000, OPCODE_MASK_H23S, mfs, special_inst }, - {"br", INST_TYPE_R2, INST_PC_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x98000000, OPCODE_MASK_H124, br, branch_inst }, -diff --git a/opcodes/microblaze-opcm.h b/opcodes/microblaze-opcm.h -index 6868389..8f5c1cb 100644 ---- a/opcodes/microblaze-opcm.h -+++ b/opcodes/microblaze-opcm.h -@@ -31,9 +31,9 @@ enum microblaze_instr - idiv, idivu, bsll, bsra, bsrl, get, put, nget, nput, cget, cput, - ncget, ncput, muli, bslli, bsrai, bsrli, mului, or, and, xor, - andn, pcmpbf, pcmpbc, pcmpeq, pcmpne, sra, src, srl, sext8, sext16, -- wic, wdc, wdcclear, wdcflush, mts, mfs, mbar, br, brd, -- brld, bra, brad, brald, microblaze_brk, beq, beqd, bne, bned, blt, -- bltd, ble, bled, bgt, bgtd, bge, bged, ori, andi, xori, andni, -+ wic, wdc, wdcclear, wdcextclear, wdcflush, wdcextflush, mts, mfs, mbar, -+ br, brd, brld, bra, brad, brald, microblaze_brk, beq, beqd, bne, bned, -+ blt, bltd, ble, bled, bgt, bgtd, bge, bged, ori, andi, xori, andni, - imm, rtsd, rtid, rtbd, rted, bri, brid, brlid, brai, braid, bralid, - brki, beqi, beqid, bnei, bneid, blti, bltid, blei, bleid, bgti, - bgtid, bgei, bgeid, lbu, lbur, lhu, lhur, lw, lwr, lwx, sb, sbr, sh, --- -1.9.0 - diff --git a/meta-xilinx-bsp/recipes-microblaze/gdb/files/0003-Patch-microblaze-Initial-port-of-microblaze-core-rea.patch b/meta-xilinx-bsp/recipes-microblaze/gdb/files/0003-Patch-microblaze-Initial-port-of-microblaze-core-rea.patch deleted file mode 100644 index 5d856408..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/gdb/files/0003-Patch-microblaze-Initial-port-of-microblaze-core-rea.patch +++ /dev/null @@ -1,384 +0,0 @@ -From da27c7161c676550f5fe8a4e0f7f395e5e0d4770 Mon Sep 17 00:00:00 2001 -From: David Holsgrove <david.holsgrove@petalogix.com> -Date: Fri, 18 May 2012 11:49:50 +1000 -Subject: [PATCH 03/16] [Patch, microblaze]: Initial port of microblaze core - reading support - -Added support for reading notes in linux core dumps -Support for reading of PRSTATUS and PSINFO information for rebuilding -".reg" sections of core dumps at run time. - -Signed-off-by: David Holsgrove <david.holsgrove@xilinx.com> -Signed-off-by: Nathan Rossi <nathan.rossi@xilinx.com> -Upstream-Status: Pending ---- - bfd/elf32-microblaze.c | 64 ++++++++++++++++++++++++++++++++ - gdb/configure.tgt | 2 +- - gdb/microblaze-linux-tdep.c | 61 +++++++++++++++++++++++++++++++ - gdb/microblaze-tdep.c | 89 +++++++++++++++++++++++++++++++++++++++++++++ - gdb/microblaze-tdep.h | 28 ++++++++++++++ - 5 files changed, 243 insertions(+), 1 deletion(-) - -diff --git a/bfd/elf32-microblaze.c b/bfd/elf32-microblaze.c -index 9837b18..cbd18f0 100644 ---- a/bfd/elf32-microblaze.c -+++ b/bfd/elf32-microblaze.c -@@ -668,6 +668,67 @@ microblaze_elf_is_local_label_name (bfd *abfd, const char *name) - return _bfd_elf_is_local_label_name (abfd, name); - } - -+/* Support for core dump NOTE sections. */ -+static bfd_boolean -+microblaze_elf_grok_prstatus (bfd *abfd, Elf_Internal_Note *note) -+{ -+ int offset; -+ unsigned int size; -+ -+ switch (note->descsz) -+ { -+ default: -+ return FALSE; -+ -+ case 228: /* Linux/MicroBlaze */ -+ /* pr_cursig */ -+ elf_tdata (abfd)->core->signal = bfd_get_16 (abfd, note->descdata + 12); -+ -+ /* pr_pid */ -+ elf_tdata (abfd)->core->pid = bfd_get_32 (abfd, note->descdata + 24); -+ -+ /* pr_reg */ -+ offset = 72; -+ size = 50 * 4; -+ -+ break; -+ } -+ -+ /* Make a ".reg/999" section. */ -+ return _bfd_elfcore_make_pseudosection (abfd, ".reg", -+ size, note->descpos + offset); -+} -+ -+static bfd_boolean -+microblaze_elf_grok_psinfo (bfd *abfd, Elf_Internal_Note *note) -+{ -+ switch (note->descsz) -+ { -+ default: -+ return FALSE; -+ -+ case 128: /* Linux/MicroBlaze elf_prpsinfo */ -+ elf_tdata (abfd)->core->program -+ = _bfd_elfcore_strndup (abfd, note->descdata + 32, 16); -+ elf_tdata (abfd)->core->command -+ = _bfd_elfcore_strndup (abfd, note->descdata + 48, 80); -+ } -+ -+ /* Note that for some reason, a spurious space is tacked -+ onto the end of the args in some (at least one anyway) -+ implementations, so strip it off if it exists. */ -+ -+ { -+ char *command = elf_tdata (abfd)->core->command; -+ int n = strlen (command); -+ -+ if (0 < n && command[n - 1] == ' ') -+ command[n - 1] = '\0'; -+ } -+ -+ return TRUE; -+} -+ - /* The microblaze linker (like many others) needs to keep track of - the number of relocs that it decides to copy as dynamic relocs in - check_relocs for each symbol. This is so that it can later discard -@@ -3506,4 +3567,7 @@ microblaze_elf_add_symbol_hook (bfd *abfd, - #define elf_backend_size_dynamic_sections microblaze_elf_size_dynamic_sections - #define elf_backend_add_symbol_hook microblaze_elf_add_symbol_hook - -+#define elf_backend_grok_prstatus microblaze_elf_grok_prstatus -+#define elf_backend_grok_psinfo microblaze_elf_grok_psinfo -+ - #include "elf32-target.h" -diff --git a/gdb/configure.tgt b/gdb/configure.tgt -index 01311b2..9297c56 100644 ---- a/gdb/configure.tgt -+++ b/gdb/configure.tgt -@@ -340,7 +340,7 @@ mep-*-*) - - microblaze*-linux-*|microblaze*-*-linux*) - # Target: Xilinx MicroBlaze running Linux -- gdb_target_obs="microblaze-tdep.o microblaze-linux-tdep.o microblaze-rom.o \ -+ gdb_target_obs="microblaze-tdep.o microblaze-linux-tdep.o microblaze-rom.o glibc-tdep.o \ - monitor.o dsrec.o solib-svr4.o symfile-mem.o linux-tdep.o" - gdb_sim=../sim/microblaze/libsim.a - ;; -diff --git a/gdb/microblaze-linux-tdep.c b/gdb/microblaze-linux-tdep.c -index 8d360eb..7e6b61b 100644 ---- a/gdb/microblaze-linux-tdep.c -+++ b/gdb/microblaze-linux-tdep.c -@@ -32,6 +32,7 @@ - #include "regset.h" - #include "solib-svr4.h" - #include "microblaze-tdep.h" -+#include "glibc-tdep.h" - #include "trad-frame.h" - #include "frame-unwind.h" - #include "tramp-frame.h" -@@ -116,6 +117,43 @@ static struct tramp_frame microblaze_linux_sighandler_tramp_frame = - microblaze_linux_sighandler_cache_init - }; - -+const struct microblaze_gregset microblaze_linux_core_gregset; -+ -+static void -+microblaze_linux_supply_core_gregset (const struct regset *regset, -+ struct regcache *regcache, -+ int regnum, const void *gregs, size_t len) -+{ -+ microblaze_supply_gregset (µblaze_linux_core_gregset, regcache, -+ regnum, gregs); -+} -+ -+static void -+microblaze_linux_collect_core_gregset (const struct regset *regset, -+ const struct regcache *regcache, -+ int regnum, void *gregs, size_t len) -+{ -+ microblaze_collect_gregset (µblaze_linux_core_gregset, regcache, -+ regnum, gregs); -+} -+ -+static void -+microblaze_linux_supply_core_fpregset (const struct regset *regset, -+ struct regcache *regcache, -+ int regnum, const void *fpregs, size_t len) -+{ -+ /* FIXME. */ -+ microblaze_supply_fpregset (regcache, regnum, fpregs); -+} -+ -+static void -+microblaze_linux_collect_core_fpregset (const struct regset *regset, -+ const struct regcache *regcache, -+ int regnum, void *fpregs, size_t len) -+{ -+ /* FIXME. */ -+ microblaze_collect_fpregset (regcache, regnum, fpregs); -+} - - static void - microblaze_linux_init_abi (struct gdbarch_info info, -@@ -123,6 +161,10 @@ microblaze_linux_init_abi (struct gdbarch_info info, - { - struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch); - -+ tdep->gregset = regset_alloc (gdbarch, microblaze_linux_supply_core_gregset, -+ microblaze_linux_collect_core_gregset); -+ tdep->sizeof_gregset = 200; -+ - linux_init_abi (info, gdbarch); - - set_gdbarch_memory_remove_breakpoint (gdbarch, -@@ -135,6 +177,25 @@ microblaze_linux_init_abi (struct gdbarch_info info, - /* Trampolines. */ - tramp_frame_prepend_unwinder (gdbarch, - µblaze_linux_sighandler_tramp_frame); -+ -+ /* BFD target for core files. */ -+ if (gdbarch_byte_order (gdbarch) == BFD_ENDIAN_BIG) -+ set_gdbarch_gcore_bfd_target (gdbarch, "elf32-microblaze"); -+ else -+ set_gdbarch_gcore_bfd_target (gdbarch, "elf32-microblazeel"); -+ -+ -+ /* Shared library handling. */ -+ set_gdbarch_skip_trampoline_code (gdbarch, find_solib_trampoline_target); -+ set_gdbarch_skip_solib_resolver (gdbarch, glibc_skip_solib_resolver); -+ -+ set_gdbarch_regset_from_core_section (gdbarch, -+ microblaze_regset_from_core_section); -+ -+ /* Enable TLS support. */ -+ set_gdbarch_fetch_tls_load_module_address (gdbarch, -+ svr4_fetch_objfile_link_map); -+ - } - - /* -Wmissing-prototypes */ -diff --git a/gdb/microblaze-tdep.c b/gdb/microblaze-tdep.c -index 14c1b52..36cf1ca 100644 ---- a/gdb/microblaze-tdep.c -+++ b/gdb/microblaze-tdep.c -@@ -145,6 +145,14 @@ microblaze_push_dummy_code (struct gdbarch *gdbarch, CORE_ADDR sp, - return sp; - } - -+static CORE_ADDR -+microblaze_store_arguments (struct regcache *regcache, int nargs, -+ struct value **args, CORE_ADDR sp, -+ int struct_return, CORE_ADDR struct_addr) -+{ -+ error (_("store_arguments not implemented")); -+ return sp; -+} - - static CORE_ADDR - microblaze_push_dummy_call (struct gdbarch *gdbarch, struct value *function, -@@ -536,6 +544,12 @@ microblaze_frame_base_address (struct frame_info *next_frame, - return cache->base; - } - -+static const struct frame_unwind * -+microblaze_frame_sniffer (struct frame_info *next_frame) -+{ -+ return µblaze_frame_unwind; -+} -+ - static const struct frame_base microblaze_frame_base = - { - µblaze_frame_unwind, -@@ -664,6 +678,70 @@ microblaze_dwarf2_reg_to_regnum (struct gdbarch *gdbarch, int reg) - return dwarf2_to_reg_map[reg]; - } - -+ -+void -+microblaze_supply_gregset (const struct microblaze_gregset *gregset, -+ struct regcache *regcache, -+ int regnum, const void *gregs) -+{ -+ unsigned int *regs = gregs; -+ if (regnum >= 0) -+ regcache_raw_supply (regcache, regnum, regs + regnum); -+ -+ if (regnum == -1) { -+ int i; -+ -+ for (i = 0; i < 50; i++) { -+ regcache_raw_supply (regcache, i, regs + i); -+ } -+ } -+} -+ -+ -+void -+microblaze_collect_gregset (const struct microblaze_gregset *gregset, -+ const struct regcache *regcache, -+ int regnum, void *gregs) -+{ -+ /* FIXME. */ -+} -+ -+void -+microblaze_supply_fpregset (struct regcache *regcache, -+ int regnum, const void *fpregs) -+{ -+ /* FIXME. */ -+} -+ -+void -+microblaze_collect_fpregset (const struct regcache *regcache, -+ int regnum, void *fpregs) -+{ -+ /* FIXME. */ -+} -+ -+ -+/* Return the appropriate register set for the core section identified -+ by SECT_NAME and SECT_SIZE. */ -+ -+const struct regset * -+microblaze_regset_from_core_section (struct gdbarch *gdbarch, -+ const char *sect_name, size_t sect_size) -+{ -+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch); -+ -+ microblaze_debug ("microblaze_regset_from_core_section, sect_name = %s\n", sect_name); -+ -+ if (strcmp (sect_name, ".reg") == 0 && sect_size >= tdep->sizeof_gregset) -+ return tdep->gregset; -+ -+ if (strcmp (sect_name, ".reg2") == 0 && sect_size >= tdep->sizeof_fpregset) -+ return tdep->fpregset; -+ -+ microblaze_debug ("microblaze_regset_from_core_section returning null :-( \n"); -+ return NULL; -+} -+ - static struct gdbarch * - microblaze_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches) - { -@@ -679,6 +757,11 @@ microblaze_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches) - tdep = XNEW (struct gdbarch_tdep); - gdbarch = gdbarch_alloc (&info, tdep); - -+ tdep->gregset = NULL; -+ tdep->sizeof_gregset = 0; -+ tdep->fpregset = NULL; -+ tdep->sizeof_fpregset = 0; -+ - set_gdbarch_long_double_bit (gdbarch, 128); - - set_gdbarch_num_regs (gdbarch, MICROBLAZE_NUM_REGS); -@@ -726,6 +809,12 @@ microblaze_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches) - frame_unwind_append_unwinder (gdbarch, µblaze_frame_unwind); - frame_base_append_sniffer (gdbarch, dwarf2_frame_base_sniffer); - -+ /* If we have register sets, enable the generic core file support. */ -+ if (tdep->gregset) { -+ set_gdbarch_regset_from_core_section (gdbarch, -+ microblaze_regset_from_core_section); -+ } -+ - return gdbarch; - } - -diff --git a/gdb/microblaze-tdep.h b/gdb/microblaze-tdep.h -index a532092..fec24b9 100644 ---- a/gdb/microblaze-tdep.h -+++ b/gdb/microblaze-tdep.h -@@ -22,8 +22,22 @@ - - - /* Microblaze architecture-specific information. */ -+struct microblaze_gregset -+{ -+ unsigned int gregs[32]; -+ unsigned int fpregs[32]; -+ unsigned int pregs[16]; -+}; -+ - struct gdbarch_tdep - { -+ int dummy; // declare something. -+ -+ /* Register sets. */ -+ struct regset *gregset; -+ size_t sizeof_gregset; -+ struct regset *fpregset; -+ size_t sizeof_fpregset; - }; - - struct microblaze_frame_cache -@@ -117,4 +131,18 @@ enum microblaze_regnum - Only used for native debugging. */ - #define MICROBLAZE_BREAKPOINT {0xb9, 0xcc, 0x00, 0x60} - -+extern void microblaze_supply_gregset (const struct microblaze_gregset *gregset, -+ struct regcache *regcache, -+ int regnum, const void *gregs); -+extern void microblaze_collect_gregset (const struct microblaze_gregset *gregset, -+ const struct regcache *regcache, -+ int regnum, void *gregs); -+extern void microblaze_supply_fpregset (struct regcache *regcache, -+ int regnum, const void *fpregs); -+extern void microblaze_collect_fpregset (const struct regcache *regcache, -+ int regnum, void *fpregs); -+ -+extern const struct regset * microblaze_regset_from_core_section (struct gdbarch *gdbarch, -+ const char *sect_name, size_t sect_size); -+ - #endif /* microblaze-tdep.h */ --- -1.9.0 - diff --git a/meta-xilinx-bsp/recipes-microblaze/gdb/files/0004-Patch-microblaze-Communicate-in-larger-blocks-with-t.patch b/meta-xilinx-bsp/recipes-microblaze/gdb/files/0004-Patch-microblaze-Communicate-in-larger-blocks-with-t.patch deleted file mode 100644 index b14e4092..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/gdb/files/0004-Patch-microblaze-Communicate-in-larger-blocks-with-t.patch +++ /dev/null @@ -1,67 +0,0 @@ -From 26e124f0d78233b1d976bd4b787f6a7866bcb7e7 Mon Sep 17 00:00:00 2001 -From: nagaraju <nmekala@xilix.com> -Date: Wed, 4 Jan 2012 16:59:33 +0530 -Subject: [PATCH 04/16] [Patch, microblaze]: Communicate in larger blocks with - the target - -Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> -Upstream-Status: Pending ---- - gdb/microblaze-tdep.c | 25 ++++++++++++++++++++++--- - 1 file changed, 22 insertions(+), 3 deletions(-) - -diff --git a/gdb/microblaze-tdep.c b/gdb/microblaze-tdep.c -index 36cf1ca..76e87b3 100644 ---- a/gdb/microblaze-tdep.c -+++ b/gdb/microblaze-tdep.c -@@ -242,6 +242,10 @@ microblaze_analyze_prologue (struct gdbarch *gdbarch, CORE_ADDR pc, - int flags = 0; - int save_hidden_pointer_found = 0; - int non_stack_instruction_found = 0; -+ int n_insns; -+ unsigned long *insn_block; -+ gdb_byte *buf_block; -+ int ti, tj; - - /* Find the start of this function. */ - find_pc_partial_function (pc, &name, &func_addr, &func_end); -@@ -281,9 +285,23 @@ microblaze_analyze_prologue (struct gdbarch *gdbarch, CORE_ADDR pc, - name, paddress (gdbarch, func_addr), - paddress (gdbarch, stop)); - -+/* Do a block read to minimize the transaction with the Debug Agent */ -+ n_insns = (stop == func_addr) ? 1 : ((stop - func_addr) / INST_WORD_SIZE); -+ insn_block = (unsigned long *)calloc(n_insns, sizeof(unsigned long)); -+ buf_block = (gdb_byte *)calloc(n_insns * INST_WORD_SIZE, sizeof(gdb_byte)); -+ -+ target_read_memory (func_addr, buf_block, n_insns * INST_WORD_SIZE ); -+ -+ for(ti = 0; ti < n_insns; ti++){ -+ insn_block[ti] = 0; -+ for( tj = ti * INST_WORD_SIZE; tj < (ti + 1) * INST_WORD_SIZE; tj++ ) -+ insn_block[ti] = (insn_block[ti] << 8) | buf_block[tj]; -+ } -+ - for (addr = func_addr; addr < stop; addr += INST_WORD_SIZE) - { -- insn = microblaze_fetch_instruction (addr); -+ //insn = microblaze_fetch_instruction (addr); -+ insn = insn_block[(addr - func_addr) / INST_WORD_SIZE]; - op = microblaze_decode_insn (insn, &rd, &ra, &rb, &imm); - microblaze_debug ("%s %08lx\n", paddress (gdbarch, pc), insn); - -@@ -409,8 +427,9 @@ microblaze_analyze_prologue (struct gdbarch *gdbarch, CORE_ADDR pc, - part of the prologue. */ - if (save_hidden_pointer_found) - prologue_end_addr -= INST_WORD_SIZE; -- -- return prologue_end_addr; -+ free(insn_block); -+ free(buf_block); -+ return prologue_end_addr; - } - - static CORE_ADDR --- -1.9.0 - diff --git a/meta-xilinx-bsp/recipes-microblaze/gdb/files/0005-Patch-microblaze-Add-mb-singlestepping.patch b/meta-xilinx-bsp/recipes-microblaze/gdb/files/0005-Patch-microblaze-Add-mb-singlestepping.patch deleted file mode 100644 index e490f02a..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/gdb/files/0005-Patch-microblaze-Add-mb-singlestepping.patch +++ /dev/null @@ -1,200 +0,0 @@ -From 5c3a08f407e1cbee5b0a4ca6092165b97acddda5 Mon Sep 17 00:00:00 2001 -From: "Edgar E. Iglesias" <edgar@axis.com> -Date: Fri, 24 Feb 2012 11:52:30 +0100 -Subject: [PATCH 05/16] [Patch, microblaze]: Add mb singlestepping. - -Fix prologue analysis for little-endian. -Always provide a frame base. - -Signed-off-by: Edgar E. Iglesias <edgar@axis.com> -Upstream-Status: Pending ---- - gdb/microblaze-tdep.c | 123 ++++++++++++++++++++++++++++++++++++++++++++------ - 1 file changed, 108 insertions(+), 15 deletions(-) - -diff --git a/gdb/microblaze-tdep.c b/gdb/microblaze-tdep.c -index 76e87b3..50b68d2 100644 ---- a/gdb/microblaze-tdep.c -+++ b/gdb/microblaze-tdep.c -@@ -243,9 +243,7 @@ microblaze_analyze_prologue (struct gdbarch *gdbarch, CORE_ADDR pc, - int save_hidden_pointer_found = 0; - int non_stack_instruction_found = 0; - int n_insns; -- unsigned long *insn_block; -- gdb_byte *buf_block; -- int ti, tj; -+ unsigned int *insn_block; - - /* Find the start of this function. */ - find_pc_partial_function (pc, &name, &func_addr, &func_end); -@@ -287,23 +285,16 @@ microblaze_analyze_prologue (struct gdbarch *gdbarch, CORE_ADDR pc, - - /* Do a block read to minimize the transaction with the Debug Agent */ - n_insns = (stop == func_addr) ? 1 : ((stop - func_addr) / INST_WORD_SIZE); -- insn_block = (unsigned long *)calloc(n_insns, sizeof(unsigned long)); -- buf_block = (gdb_byte *)calloc(n_insns * INST_WORD_SIZE, sizeof(gdb_byte)); -+ insn_block = calloc(n_insns, sizeof(unsigned long)); - -- target_read_memory (func_addr, buf_block, n_insns * INST_WORD_SIZE ); -- -- for(ti = 0; ti < n_insns; ti++){ -- insn_block[ti] = 0; -- for( tj = ti * INST_WORD_SIZE; tj < (ti + 1) * INST_WORD_SIZE; tj++ ) -- insn_block[ti] = (insn_block[ti] << 8) | buf_block[tj]; -- } -+ target_read_memory (func_addr, (void*) insn_block, n_insns * INST_WORD_SIZE ); - - for (addr = func_addr; addr < stop; addr += INST_WORD_SIZE) - { - //insn = microblaze_fetch_instruction (addr); - insn = insn_block[(addr - func_addr) / INST_WORD_SIZE]; - op = microblaze_decode_insn (insn, &rd, &ra, &rb, &imm); -- microblaze_debug ("%s %08lx\n", paddress (gdbarch, pc), insn); -+ microblaze_debug ("%s %08lx op=%x r%d r%d imm=%d\n", paddress (gdbarch, addr), insn, op, rd, ra, imm); - - /* This code is very sensitive to what functions are present in the - prologue. It assumes that the (addi, addik, swi, sw) can be the -@@ -428,7 +419,6 @@ microblaze_analyze_prologue (struct gdbarch *gdbarch, CORE_ADDR pc, - if (save_hidden_pointer_found) - prologue_end_addr -= INST_WORD_SIZE; - free(insn_block); -- free(buf_block); - return prologue_end_addr; - } - -@@ -502,6 +492,7 @@ microblaze_frame_cache (struct frame_info *next_frame, void **this_cache) - - func = get_frame_func (next_frame); - -+ cache->base = get_frame_register_unsigned (next_frame, gdbarch_sp_regnum (gdbarch)); - cache->pc = get_frame_address_in_block (next_frame); - - return cache; -@@ -518,7 +509,7 @@ microblaze_frame_this_id (struct frame_info *next_frame, void **this_cache, - if (cache->base == 0) - return; - -- (*this_id) = frame_id_build (cache->base, cache->pc); -+ (*this_id) = frame_id_build (cache->base, get_frame_pc (next_frame)); - } - - static struct value * -@@ -661,6 +652,107 @@ microblaze_stabs_argument_has_addr (struct gdbarch *gdbarch, struct type *type) - return (TYPE_LENGTH (type) == 16); - } - -+int -+microblaze_software_single_step (struct frame_info *frame) -+{ -+ struct gdbarch *arch = get_frame_arch (frame); -+ struct address_space *aspace = get_frame_address_space (frame); -+ struct gdbarch_tdep *tdep = gdbarch_tdep (arch); -+ static char le_breakp[] = MICROBLAZE_BREAKPOINT_LE; -+ static char be_breakp[] = MICROBLAZE_BREAKPOINT; -+ enum bfd_endian byte_order = gdbarch_byte_order (arch); -+ char *breakp = byte_order == BFD_ENDIAN_BIG ? be_breakp : le_breakp; -+ int ret = 0; -+ -+ /* Save the address and the values of the next_pc and the target */ -+ static struct sstep_breaks -+ { -+ CORE_ADDR address; -+ bfd_boolean valid; -+ /* Shadow contents. */ -+ char data[INST_WORD_SIZE]; -+ } stepbreaks[2]; -+ int ii; -+ -+ if (1) -+ { -+ CORE_ADDR pc; -+ long insn; -+ enum microblaze_instr minstr; -+ bfd_boolean isunsignednum; -+ enum microblaze_instr_type insn_type; -+ short delay_slots; -+ int imm; -+ bfd_boolean immfound = FALSE; -+ -+ /* Set a breakpoint at the next instruction */ -+ /* If the current instruction is an imm, set it at the inst after */ -+ /* If the instruction has a delay slot, skip the delay slot */ -+ pc = get_frame_pc (frame); -+ insn = microblaze_fetch_instruction (pc); -+ minstr = get_insn_microblaze (insn, &isunsignednum, &insn_type, &delay_slots); -+ if (insn_type == immediate_inst) -+ { -+ int rd, ra, rb; -+ immfound = TRUE; -+ minstr = microblaze_decode_insn (insn, &rd, &ra, &rb, &imm); -+ pc = pc + INST_WORD_SIZE; -+ insn = microblaze_fetch_instruction (pc); -+ minstr = get_insn_microblaze (insn, &isunsignednum, &insn_type, &delay_slots); -+ } -+ stepbreaks[0].address = pc + (delay_slots * INST_WORD_SIZE) + INST_WORD_SIZE; -+ if (insn_type != return_inst) { -+ stepbreaks[0].valid = TRUE; -+ } else { -+ stepbreaks[0].valid = FALSE; -+ } -+ -+ microblaze_debug ("single-step insn_type=%x insn=%x\n", insn_type, insn); -+ /* Now check for branch or return instructions */ -+ if (insn_type == branch_inst || insn_type == return_inst) { -+ int limm; -+ int lrd, lra, lrb; -+ int ra, rb; -+ bfd_boolean targetvalid; -+ bfd_boolean unconditionalbranch; -+ microblaze_decode_insn(insn, &lrd, &lra, &lrb, &limm); -+ if (lra >= 0 && lra < MICROBLAZE_NUM_REGS) -+ ra = get_frame_register_unsigned (frame, lra); -+ else -+ ra = 0; -+ if (lrb >= 0 && lrb < MICROBLAZE_NUM_REGS) -+ rb = get_frame_register_unsigned (frame, lrb); -+ else -+ rb = 0; -+ stepbreaks[1].address = microblaze_get_target_address (insn, immfound, imm, pc, ra, rb, &targetvalid, &unconditionalbranch); -+ microblaze_debug ("single-step uncondbr=%d targetvalid=%d target=%x\n", unconditionalbranch, targetvalid, stepbreaks[1].address); -+ if (unconditionalbranch) -+ stepbreaks[0].valid = FALSE; /* This is a unconditional branch: will not come to the next address */ -+ if (targetvalid && (stepbreaks[0].valid == FALSE || -+ (stepbreaks[0].address != stepbreaks[1].address)) -+ && (stepbreaks[1].address != pc)) { -+ stepbreaks[1].valid = TRUE; -+ } else { -+ stepbreaks[1].valid = FALSE; -+ } -+ } else { -+ stepbreaks[1].valid = FALSE; -+ } -+ -+ /* Insert the breakpoints */ -+ for (ii = 0; ii < 2; ++ii) -+ { -+ -+ /* ignore invalid breakpoint. */ -+ if (stepbreaks[ii].valid) { -+ insert_single_step_breakpoint (arch, aspace, stepbreaks[ii].address); -+ ret = 1; -+ } -+ } -+ } -+ return ret; -+} -+ - static void - microblaze_write_pc (struct regcache *regcache, CORE_ADDR pc) - { -@@ -809,6 +901,7 @@ microblaze_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches) - set_gdbarch_inner_than (gdbarch, core_addr_lessthan); - - set_gdbarch_breakpoint_from_pc (gdbarch, microblaze_breakpoint_from_pc); -+ set_gdbarch_software_single_step (gdbarch, microblaze_software_single_step); - - set_gdbarch_frame_args_skip (gdbarch, 8); - --- -1.9.0 - diff --git a/meta-xilinx-bsp/recipes-microblaze/gdb/files/0006-Patch-microblaze-Add-initial-port-of-linux-gdbserver.patch b/meta-xilinx-bsp/recipes-microblaze/gdb/files/0006-Patch-microblaze-Add-initial-port-of-linux-gdbserver.patch deleted file mode 100644 index cb2eec18..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/gdb/files/0006-Patch-microblaze-Add-initial-port-of-linux-gdbserver.patch +++ /dev/null @@ -1,553 +0,0 @@ -From 2112c9ded01ddd08f0e31e5ce23eecac6c04e8c4 Mon Sep 17 00:00:00 2001 -From: David Holsgrove <david.holsgrove@petalogix.com> -Date: Mon, 6 Feb 2012 10:28:29 +1000 -Subject: [PATCH 06/16] [Patch, microblaze]: Add initial port of linux - gdbserver - -add gdb_proc_service_h to gdbserver microblaze-linux - -gdbserver needs to initialise the microblaze registers - -other archs use this step to run a *_arch_setup() to carry out all -architecture specific setup - may need to add in future - - * add linux-ptrace.o to gdbserver configure - * gdb/configure.tgt: Set build_gdbserver=yes - * Update breakpoint opcode - * fix segfault on connecting gdbserver - * add microblaze_linux_memory_remove_breakpoint - * add set_solib_svr4_fetch_link_map_offsets - * add set_gdbarch_fetch_tls_load_module_address - * Force reading of r0 as 0, prevent stores - -Signed-off-by: David Holsgrove <david.holsgrove@petalogix.com> -Signed-off-by: Nathan Rossi <nathan.rossi@petalogix.com> -Upstream-Status: Pending ---- - gdb/configure.host | 3 + - gdb/configure.tgt | 1 + - gdb/gdbserver/Makefile.in | 4 + - gdb/gdbserver/configure.srv | 6 + - gdb/gdbserver/linux-microblaze-low.c | 228 +++++++++++++++++++++++++++++++++++ - gdb/microblaze-linux-tdep.c | 25 +++- - gdb/microblaze-tdep.c | 45 ++++++- - gdb/microblaze-tdep.h | 3 +- - gdb/regformats/reg-microblaze.dat | 39 ++++++ - 9 files changed, 348 insertions(+), 6 deletions(-) - create mode 100644 gdb/gdbserver/linux-microblaze-low.c - create mode 100644 gdb/regformats/reg-microblaze.dat - -diff --git a/gdb/configure.host b/gdb/configure.host -index 15a8288..76cc5fe 100644 ---- a/gdb/configure.host -+++ b/gdb/configure.host -@@ -59,6 +59,7 @@ i[34567]86*) gdb_host_cpu=i386 ;; - m68*) gdb_host_cpu=m68k ;; - m88*) gdb_host_cpu=m88k ;; - mips*) gdb_host_cpu=mips ;; -+microblaze*) gdb_host_cpu=microblaze ;; - powerpc* | rs6000) gdb_host_cpu=powerpc ;; - sparcv9 | sparc64) gdb_host_cpu=sparc ;; - s390*) gdb_host_cpu=s390 ;; -@@ -133,6 +134,8 @@ mips*-*-netbsd* | mips*-*-knetbsd*-gnu) - gdb_host=nbsd ;; - mips64*-*-openbsd*) gdb_host=obsd64 ;; - -+microblaze*-*linux*) gdb_host=linux ;; -+ - powerpc-*-aix* | rs6000-*-* | powerpc64-*-aix*) - gdb_host=aix ;; - powerpc*-*-freebsd*) gdb_host=fbsd ;; -diff --git a/gdb/configure.tgt b/gdb/configure.tgt -index 9297c56..3a7951a 100644 ---- a/gdb/configure.tgt -+++ b/gdb/configure.tgt -@@ -343,6 +343,7 @@ microblaze*-linux-*|microblaze*-*-linux*) - gdb_target_obs="microblaze-tdep.o microblaze-linux-tdep.o microblaze-rom.o glibc-tdep.o \ - monitor.o dsrec.o solib-svr4.o symfile-mem.o linux-tdep.o" - gdb_sim=../sim/microblaze/libsim.a -+ build_gdbserver=yes - ;; - microblaze*-*-*) - # Target: Xilinx MicroBlaze running standalone -diff --git a/gdb/gdbserver/Makefile.in b/gdb/gdbserver/Makefile.in -index f773fa2..a11ace1 100644 ---- a/gdb/gdbserver/Makefile.in -+++ b/gdb/gdbserver/Makefile.in -@@ -148,6 +148,7 @@ SFILES= $(srcdir)/gdbreplay.c $(srcdir)/inferiors.c $(srcdir)/dll.c \ - $(srcdir)/linux-ia64-low.c $(srcdir)/linux-low.c \ - $(srcdir)/linux-m32r-low.c \ - $(srcdir)/linux-m68k-low.c $(srcdir)/linux-mips-low.c \ -+ $(srcdir)/linux-microblaze-low.c \ - $(srcdir)/linux-nios2-low.c \ - $(srcdir)/linux-ppc-low.c \ - $(srcdir)/linux-s390-low.c \ -@@ -329,6 +330,7 @@ clean: - rm -f arm-with-iwmmxt.c - rm -f arm-with-vfpv2.c arm-with-vfpv3.c arm-with-neon.c - rm -f mips-linux.c mips64-linux.c -+ rm -f microblaze-linux.c - rm -f nios2-linux.c - rm -f powerpc-32.c powerpc-32l.c powerpc-64l.c powerpc-e500l.c - rm -f powerpc-altivec32l.c powerpc-cell32l.c powerpc-vsx32l.c -@@ -612,6 +614,8 @@ reg-m68k.c : $(srcdir)/../regformats/reg-m68k.dat $(regdat_sh) - $(SHELL) $(regdat_sh) $(srcdir)/../regformats/reg-m68k.dat reg-m68k.c - reg-cf.c : $(srcdir)/../regformats/reg-cf.dat $(regdat_sh) - $(SHELL) $(regdat_sh) $(srcdir)/../regformats/reg-cf.dat reg-cf.c -+microblaze-linux.c : $(srcdir)/../regformats/reg-microblaze.dat $(regdat_sh) -+ $(SHELL) $(regdat_sh) $(srcdir)/../regformats/reg-microblaze.dat microblaze-linux.c - mips-linux.c : $(srcdir)/../regformats/mips-linux.dat $(regdat_sh) - $(SHELL) $(regdat_sh) $(srcdir)/../regformats/mips-linux.dat mips-linux.c - mips-dsp-linux.c : $(srcdir)/../regformats/mips-dsp-linux.dat $(regdat_sh) -diff --git a/gdb/gdbserver/configure.srv b/gdb/gdbserver/configure.srv -index cc4f53d..359c756 100644 ---- a/gdb/gdbserver/configure.srv -+++ b/gdb/gdbserver/configure.srv -@@ -198,6 +198,12 @@ case "${target}" in - srv_linux_usrregs=yes - srv_linux_thread_db=yes - ;; -+ microblaze*-*-linux*) srv_regobj=microblaze-linux.o -+ srv_tgtobj="$srv_linux_obj linux-microblaze-low.o" -+ srv_linux_usrregs=yes -+ srv_linux_regsets=yes -+ srv_linux_thread_db=yes -+ ;; - nios2*-*-linux*) srv_regobj="nios2-linux.o" - srv_tgtobj="$srv_linux_obj linux-nios2-low.o" - srv_xmlfiles="nios2-linux.xml" -diff --git a/gdb/gdbserver/linux-microblaze-low.c b/gdb/gdbserver/linux-microblaze-low.c -new file mode 100644 -index 0000000..279df9f ---- /dev/null -+++ b/gdb/gdbserver/linux-microblaze-low.c -@@ -0,0 +1,228 @@ -+/* GNU/Linux/Microblaze specific low level interface, for the remote server for -+ GDB. -+ Copyright (C) 1995-2013 Free Software Foundation, Inc. -+ -+ This file is part of GDB. -+ -+ This program is free software; you can redistribute it and/or modify -+ it under the terms of the GNU General Public License as published by -+ the Free Software Foundation; either version 3 of the License, or -+ (at your option) any later version. -+ -+ This program is distributed in the hope that it will be useful, -+ but WITHOUT ANY WARRANTY; without even the implied warranty of -+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ GNU General Public License for more details. -+ -+ You should have received a copy of the GNU General Public License -+ along with this program. If not, see <http://www.gnu.org/licenses/>. */ -+ -+#include "server.h" -+#include "linux-low.h" -+ -+#include <asm/ptrace.h> -+#include <sys/procfs.h> -+#include <sys/ptrace.h> -+ -+#include "gdb_proc_service.h" -+ -+static int microblaze_regmap[] = -+ {PT_GPR(0), PT_GPR(1), PT_GPR(2), PT_GPR(3), -+ PT_GPR(4), PT_GPR(5), PT_GPR(6), PT_GPR(7), -+ PT_GPR(8), PT_GPR(9), PT_GPR(10), PT_GPR(11), -+ PT_GPR(12), PT_GPR(13), PT_GPR(14), PT_GPR(15), -+ PT_GPR(16), PT_GPR(17), PT_GPR(18), PT_GPR(19), -+ PT_GPR(20), PT_GPR(21), PT_GPR(22), PT_GPR(23), -+ PT_GPR(24), PT_GPR(25), PT_GPR(26), PT_GPR(27), -+ PT_GPR(28), PT_GPR(29), PT_GPR(30), PT_GPR(31), -+ PT_PC, PT_MSR, PT_EAR, PT_ESR, -+ PT_FSR -+ }; -+ -+#define microblaze_num_regs (sizeof microblaze_regmap / sizeof microblaze_regmap[0]) -+ -+/* Defined in auto-generated file microblaze-linux.c. */ -+void init_registers_microblaze (void); -+extern const struct target_desc *tdesc_microblaze; -+ -+static int -+microblaze_cannot_store_register (int regno) -+{ -+ if (microblaze_regmap[regno] == -1 || regno == 0) -+ return 1; -+ -+ return 0; -+} -+ -+static int -+microblaze_cannot_fetch_register (int regno) -+{ -+ return 0; -+} -+ -+static CORE_ADDR -+microblaze_get_pc (struct regcache *regcache) -+{ -+ unsigned long pc; -+ -+ collect_register_by_name (regcache, "pc", &pc); -+ return (CORE_ADDR) pc; -+} -+ -+static void -+microblaze_set_pc (struct regcache *regcache, CORE_ADDR pc) -+{ -+ unsigned long newpc = pc; -+ -+ supply_register_by_name (regcache, "pc", &newpc); -+} -+ -+/* dbtrap insn */ -+/* brki r16, 0x18; */ -+static const unsigned long microblaze_breakpoint = 0xba0c0018; -+#define microblaze_breakpoint_len 4 -+ -+static int -+microblaze_breakpoint_at (CORE_ADDR where) -+{ -+ unsigned long insn; -+ -+ (*the_target->read_memory) (where, (unsigned char *) &insn, 4); -+ if (insn == microblaze_breakpoint) -+ return 1; -+ /* If necessary, recognize more trap instructions here. GDB only uses the -+ one. */ -+ return 0; -+} -+ -+static CORE_ADDR -+microblaze_reinsert_addr (struct regcache *regcache) -+{ -+ unsigned long pc; -+ collect_register_by_name (regcache, "r15", &pc); -+ return pc; -+} -+ -+#ifdef HAVE_PTRACE_GETREGS -+ -+static void -+microblaze_collect_ptrace_register (struct regcache *regcache, int regno, char *buf) -+{ -+ int size = register_size (regcache->tdesc, regno); -+ -+ memset (buf, 0, sizeof (long)); -+ -+ if (size < sizeof (long)) -+ collect_register (regcache, regno, buf + sizeof (long) - size); -+ else -+ collect_register (regcache, regno, buf); -+} -+ -+static void -+microblaze_supply_ptrace_register (struct regcache *regcache, -+ int regno, const char *buf) -+{ -+ int size = register_size (regcache->tdesc, regno); -+ -+ if (regno == 0) { -+ unsigned long regbuf_0 = 0; -+ /* clobbering r0 so that it is always 0 as enforced by hardware */ -+ supply_register (regcache, regno, (const char*)®buf_0); -+ } else { -+ if (size < sizeof (long)) -+ supply_register (regcache, regno, buf + sizeof (long) - size); -+ else -+ supply_register (regcache, regno, buf); -+ } -+} -+ -+/* Provide only a fill function for the general register set. ps_lgetregs -+ will use this for NPTL support. */ -+ -+static void microblaze_fill_gregset (struct regcache *regcache, void *buf) -+{ -+ int i; -+ -+ for (i = 0; i < 32; i++) -+ microblaze_collect_ptrace_register (regcache, i, (char *) buf + microblaze_regmap[i]); -+} -+ -+static void -+microblaze_store_gregset (struct regcache *regcache, const void *buf) -+{ -+ int i; -+ -+ for (i = 0; i < 32; i++) -+ supply_register (regcache, i, (char *) buf + microblaze_regmap[i]); -+} -+ -+#endif /* HAVE_PTRACE_GETREGS */ -+ -+static struct regset_info microblaze_regsets[] = { -+#ifdef HAVE_PTRACE_GETREGS -+ { PTRACE_GETREGS, PTRACE_SETREGS, 0, sizeof (elf_gregset_t), GENERAL_REGS, microblaze_fill_gregset, microblaze_store_gregset }, -+ { 0, 0, 0, -1, -1, NULL, NULL }, -+#endif /* HAVE_PTRACE_GETREGS */ -+ { 0, 0, 0, -1, -1, NULL, NULL } -+}; -+ -+static struct regsets_info microblaze_regsets_info = -+ { -+ microblaze_regsets, /* regsets */ -+ 0, /* num_regsets */ -+ NULL, /* disabled_regsets */ -+ }; -+ -+static struct usrregs_info microblaze_usrregs_info = -+ { -+ microblaze_num_regs, -+ microblaze_regmap, -+ }; -+ -+static struct regs_info regs_info = -+ { -+ NULL, /* regset_bitmap */ -+ µblaze_usrregs_info, -+ µblaze_regsets_info -+ }; -+ -+static const struct regs_info * -+microblaze_regs_info (void) -+{ -+ return ®s_info; -+} -+ -+static void -+microblaze_arch_setup (void) -+{ -+ current_process ()->tdesc = tdesc_microblaze; -+} -+ -+struct linux_target_ops the_low_target = { -+ microblaze_arch_setup, -+ microblaze_regs_info, -+ microblaze_cannot_fetch_register, -+ microblaze_cannot_store_register, -+ NULL, /* fetch_register */ -+ microblaze_get_pc, -+ microblaze_set_pc, -+ (const unsigned char *) µblaze_breakpoint, -+ microblaze_breakpoint_len, -+ microblaze_reinsert_addr, -+ 0, -+ microblaze_breakpoint_at, -+ NULL, -+ NULL, -+ NULL, -+ NULL, -+ microblaze_collect_ptrace_register, -+ microblaze_supply_ptrace_register, -+}; -+ -+void -+initialize_low_arch (void) -+{ -+ init_registers_microblaze (); -+ -+ initialize_regsets_info (µblaze_regsets_info); -+} -\ No newline at end of file -diff --git a/gdb/microblaze-linux-tdep.c b/gdb/microblaze-linux-tdep.c -index 7e6b61b..cf58e21 100644 ---- a/gdb/microblaze-linux-tdep.c -+++ b/gdb/microblaze-linux-tdep.c -@@ -38,6 +38,22 @@ - #include "tramp-frame.h" - #include "linux-tdep.h" - -+static int microblaze_debug_flag = 0; -+ -+static void -+microblaze_debug (const char *fmt, ...) -+{ -+ if (microblaze_debug_flag) -+ { -+ va_list args; -+ -+ va_start (args, fmt); -+ printf_unfiltered ("MICROBLAZE LINUX: "); -+ vprintf_unfiltered (fmt, args); -+ va_end (args); -+ } -+} -+ - static int - microblaze_linux_memory_remove_breakpoint (struct gdbarch *gdbarch, - struct bp_target_info *bp_tgt) -@@ -47,20 +63,27 @@ microblaze_linux_memory_remove_breakpoint (struct gdbarch *gdbarch, - int val; - int bplen; - gdb_byte old_contents[BREAKPOINT_MAX]; -+ struct cleanup *cleanup; - - /* Determine appropriate breakpoint contents and size for this address. */ - bp = gdbarch_breakpoint_from_pc (gdbarch, &addr, &bplen); - if (bp == NULL) - error (_("Software breakpoints not implemented for this target.")); - -+ /* Make sure we see the memory breakpoints. */ -+ cleanup = make_show_memory_breakpoints_cleanup (1); - val = target_read_memory (addr, old_contents, bplen); - - /* If our breakpoint is no longer at the address, this means that the - program modified the code on us, so it is wrong to put back the - old value. */ - if (val == 0 && memcmp (bp, old_contents, bplen) == 0) -- val = target_write_raw_memory (addr, bp_tgt->shadow_contents, bplen); -+ { -+ val = target_write_raw_memory (addr, bp_tgt->shadow_contents, bplen); -+ microblaze_debug ("microblaze_linux_memory_remove_breakpoint writing back to memory at addr 0x%lx\n", addr); -+ } - -+ do_cleanups (cleanup); - return val; - } - -diff --git a/gdb/microblaze-tdep.c b/gdb/microblaze-tdep.c -index 50b68d2..1c6dbfe 100644 ---- a/gdb/microblaze-tdep.c -+++ b/gdb/microblaze-tdep.c -@@ -164,6 +164,39 @@ microblaze_push_dummy_call (struct gdbarch *gdbarch, struct value *function, - return sp; - } - -+static int -+microblaze_linux_memory_remove_breakpoint (struct gdbarch *gdbarch, -+ struct bp_target_info *bp_tgt) -+{ -+ CORE_ADDR addr = bp_tgt->placed_address; -+ const unsigned char *bp; -+ int val; -+ int bplen; -+ gdb_byte old_contents[BREAKPOINT_MAX]; -+ struct cleanup *cleanup; -+ -+ /* Determine appropriate breakpoint contents and size for this address. */ -+ bp = gdbarch_breakpoint_from_pc (gdbarch, &addr, &bplen); -+ if (bp == NULL) -+ error (_("Software breakpoints not implemented for this target.")); -+ -+ /* Make sure we see the memory breakpoints. */ -+ cleanup = make_show_memory_breakpoints_cleanup (1); -+ val = target_read_memory (addr, old_contents, bplen); -+ -+ /* If our breakpoint is no longer at the address, this means that the -+ program modified the code on us, so it is wrong to put back the -+ old value. */ -+ if (val == 0 && memcmp (bp, old_contents, bplen) == 0) -+ { -+ val = target_write_raw_memory (addr, bp_tgt->shadow_contents, bplen); -+ microblaze_debug ("microblaze_linux_memory_remove_breakpoint writing back to memory at addr 0x%lx\n", addr); -+ } -+ -+ do_cleanups (cleanup); -+ return val; -+} -+ - static const gdb_byte * - microblaze_breakpoint_from_pc (struct gdbarch *gdbarch, CORE_ADDR *pc, - int *len) -@@ -291,8 +324,8 @@ microblaze_analyze_prologue (struct gdbarch *gdbarch, CORE_ADDR pc, - - for (addr = func_addr; addr < stop; addr += INST_WORD_SIZE) - { -- //insn = microblaze_fetch_instruction (addr); -- insn = insn_block[(addr - func_addr) / INST_WORD_SIZE]; -+ insn = microblaze_fetch_instruction (addr); -+ //insn = insn_block[(addr - func_addr) / INST_WORD_SIZE]; - op = microblaze_decode_insn (insn, &rd, &ra, &rb, &imm); - microblaze_debug ("%s %08lx op=%x r%d r%d imm=%d\n", paddress (gdbarch, addr), insn, op, rd, ra, imm); - -@@ -724,13 +757,15 @@ microblaze_software_single_step (struct frame_info *frame) - rb = get_frame_register_unsigned (frame, lrb); - else - rb = 0; -+ - stepbreaks[1].address = microblaze_get_target_address (insn, immfound, imm, pc, ra, rb, &targetvalid, &unconditionalbranch); -- microblaze_debug ("single-step uncondbr=%d targetvalid=%d target=%x\n", unconditionalbranch, targetvalid, stepbreaks[1].address); -+ microblaze_debug ("single-step uncondbr=%d targetvalid=%d target=%x\n", unconditionalbranch, targetvalid, stepbreaks[1].address); -+ - if (unconditionalbranch) - stepbreaks[0].valid = FALSE; /* This is a unconditional branch: will not come to the next address */ - if (targetvalid && (stepbreaks[0].valid == FALSE || - (stepbreaks[0].address != stepbreaks[1].address)) -- && (stepbreaks[1].address != pc)) { -+ && (stepbreaks[1].address != pc)) { - stepbreaks[1].valid = TRUE; - } else { - stepbreaks[1].valid = FALSE; -@@ -900,6 +935,8 @@ microblaze_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches) - /* Stack grows downward. */ - set_gdbarch_inner_than (gdbarch, core_addr_lessthan); - -+ set_gdbarch_memory_remove_breakpoint (gdbarch, microblaze_linux_memory_remove_breakpoint); -+ - set_gdbarch_breakpoint_from_pc (gdbarch, microblaze_breakpoint_from_pc); - set_gdbarch_software_single_step (gdbarch, microblaze_software_single_step); - -diff --git a/gdb/microblaze-tdep.h b/gdb/microblaze-tdep.h -index fec24b9..98aa0f5 100644 ---- a/gdb/microblaze-tdep.h -+++ b/gdb/microblaze-tdep.h -@@ -129,7 +129,8 @@ enum microblaze_regnum - - /* MICROBLAZE_BREAKPOINT defines the breakpoint that should be used. - Only used for native debugging. */ --#define MICROBLAZE_BREAKPOINT {0xb9, 0xcc, 0x00, 0x60} -+#define MICROBLAZE_BREAKPOINT {0xba, 0x0c, 0x00, 0x18} -+#define MICROBLAZE_BREAKPOINT_LE {0x18, 0x00, 0x0c, 0xba} - - extern void microblaze_supply_gregset (const struct microblaze_gregset *gregset, - struct regcache *regcache, -diff --git a/gdb/regformats/reg-microblaze.dat b/gdb/regformats/reg-microblaze.dat -new file mode 100644 -index 0000000..a5dd0a0 ---- /dev/null -+++ b/gdb/regformats/reg-microblaze.dat -@@ -0,0 +1,39 @@ -+name:microblaze -+expedite:r1,pc -+32:r0 -+32:r1 -+32:r2 -+32:r3 -+32:r4 -+32:r5 -+32:r6 -+32:r7 -+32:r8 -+32:r9 -+32:r10 -+32:r11 -+32:r12 -+32:r13 -+32:r14 -+32:r15 -+32:r16 -+32:r17 -+32:r18 -+32:r19 -+32:r20 -+32:r21 -+32:r22 -+32:r23 -+32:r24 -+32:r25 -+32:r26 -+32:r27 -+32:r28 -+32:r29 -+32:r30 -+32:r31 -+32:pc -+32:msr -+32:ear -+32:esr -+32:fsr --- -1.9.0 - diff --git a/meta-xilinx-bsp/recipes-microblaze/gdb/files/0007-Patch-microblaze-Add-slr-and-shr-regs-and-little-end.patch b/meta-xilinx-bsp/recipes-microblaze/gdb/files/0007-Patch-microblaze-Add-slr-and-shr-regs-and-little-end.patch deleted file mode 100644 index 7cd11905..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/gdb/files/0007-Patch-microblaze-Add-slr-and-shr-regs-and-little-end.patch +++ /dev/null @@ -1,82 +0,0 @@ -From fb2af2fffb673dbb14d743c8da94c4a83b71c792 Mon Sep 17 00:00:00 2001 -From: David Holsgrove <david.holsgrove@xilinx.com> -Date: Mon, 26 Nov 2012 17:39:17 +1000 -Subject: [PATCH 07/16] [Patch, microblaze]: Add slr and shr regs and - little-endian breakpoint - -Signed-off-by: David Holsgrove <david.holsgrove@xilinx.com> -Upstream-Status: Pending ---- - gdb/microblaze-tdep.c | 10 ++++++++-- - gdb/microblaze-tdep.h | 6 ++++-- - gdb/regformats/reg-microblaze.dat | 2 ++ - 3 files changed, 14 insertions(+), 4 deletions(-) - -diff --git a/gdb/microblaze-tdep.c b/gdb/microblaze-tdep.c -index 1c6dbfe..0ce4947 100644 ---- a/gdb/microblaze-tdep.c -+++ b/gdb/microblaze-tdep.c -@@ -73,7 +73,8 @@ static const char *microblaze_register_names[] = - "rpc", "rmsr", "rear", "resr", "rfsr", "rbtr", - "rpvr0", "rpvr1", "rpvr2", "rpvr3", "rpvr4", "rpvr5", "rpvr6", - "rpvr7", "rpvr8", "rpvr9", "rpvr10", "rpvr11", -- "redr", "rpid", "rzpr", "rtlbx", "rtlbsx", "rtlblo", "rtlbhi" -+ "redr", "rpid", "rzpr", "rtlbx", "rtlbsx", "rtlblo", "rtlbhi", -+ "rslr", "rshr" - }; - - #define MICROBLAZE_NUM_REGS ARRAY_SIZE (microblaze_register_names) -@@ -201,10 +202,15 @@ static const gdb_byte * - microblaze_breakpoint_from_pc (struct gdbarch *gdbarch, CORE_ADDR *pc, - int *len) - { -+ enum bfd_endian byte_order = gdbarch_byte_order (gdbarch); - static gdb_byte break_insn[] = MICROBLAZE_BREAKPOINT; -+ static gdb_byte break_insn_le[] = MICROBLAZE_BREAKPOINT_LE; - - *len = sizeof (break_insn); -- return break_insn; -+ if (byte_order == BFD_ENDIAN_BIG) -+ return break_insn; -+ else -+ return break_insn_le; - } - - /* Allocate and initialize a frame cache. */ -diff --git a/gdb/microblaze-tdep.h b/gdb/microblaze-tdep.h -index 98aa0f5..cd32e9f 100644 ---- a/gdb/microblaze-tdep.h -+++ b/gdb/microblaze-tdep.h -@@ -56,7 +56,7 @@ struct microblaze_frame_cache - int fp_regnum; - - /* Offsets to saved registers. */ -- int register_offsets[57]; /* Must match MICROBLAZE_NUM_REGS. */ -+ int register_offsets[59]; /* Must match MICROBLAZE_NUM_REGS. */ - - /* Table of saved registers. */ - struct trad_frame_saved_reg *saved_regs; -@@ -121,7 +121,9 @@ enum microblaze_regnum - MICROBLAZE_RTLBX_REGNUM, - MICROBLAZE_RTLBSX_REGNUM, - MICROBLAZE_RTLBLO_REGNUM, -- MICROBLAZE_RTLBHI_REGNUM -+ MICROBLAZE_RTLBHI_REGNUM, -+ MICROBLAZE_SLR_REGNUM, -+ MICROBLAZE_SHR_REGNUM - }; - - /* All registers are 32 bits. */ -diff --git a/gdb/regformats/reg-microblaze.dat b/gdb/regformats/reg-microblaze.dat -index a5dd0a0..bd8a438 100644 ---- a/gdb/regformats/reg-microblaze.dat -+++ b/gdb/regformats/reg-microblaze.dat -@@ -37,3 +37,5 @@ expedite:r1,pc - 32:ear - 32:esr - 32:fsr -+32:slr -+32:shr --- -1.9.0 - diff --git a/meta-xilinx-bsp/recipes-microblaze/gdb/files/0008-Patch-microblaze-Added-Backtrace-support-to-GDB.patch b/meta-xilinx-bsp/recipes-microblaze/gdb/files/0008-Patch-microblaze-Added-Backtrace-support-to-GDB.patch deleted file mode 100644 index 7f075d55..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/gdb/files/0008-Patch-microblaze-Added-Backtrace-support-to-GDB.patch +++ /dev/null @@ -1,156 +0,0 @@ -From 7944750e435100e72913f01aa0a43b7d7cffd421 Mon Sep 17 00:00:00 2001 -From: nagaraju <nmekala@xilix.com> -Date: Tue, 3 Sep 2013 12:09:47 +0530 -Subject: [PATCH 08/16] [Patch, microblaze]: Added Backtrace support to GDB - -Added backtrace support without debugging information. - -Earlier backtrace used to work only when debug information is available. -Previous pc & sp values are calculated incorrectly due to which backtrace -was failing. - -In this patch, previous frame sp & pc values are calculated correctly -in microblaze_frame_cache function and supplied them to -microblaze_frame_prev_register function - -Signed-off-by:nagaraju <nmekala@xilix.com> -Upstream-Status: Pending ---- - gdb/microblaze-tdep.c | 42 ++++++++++++++++++++++++++++++++++-------- - gdb/microblaze-tdep.h | 5 +++-- - 2 files changed, 37 insertions(+), 10 deletions(-) - -diff --git a/gdb/microblaze-tdep.c b/gdb/microblaze-tdep.c -index 0ce4947..247740e 100644 ---- a/gdb/microblaze-tdep.c -+++ b/gdb/microblaze-tdep.c -@@ -225,6 +225,7 @@ microblaze_alloc_frame_cache (void) - /* Base address. */ - cache->base = 0; - cache->pc = 0; -+ cache->saved_sp = 0; - - /* Frameless until proven otherwise. */ - cache->frameless_p = 1; -@@ -347,6 +348,7 @@ microblaze_analyze_prologue (struct gdbarch *gdbarch, CORE_ADDR pc, - cache->frameless_p = 0; /* Frame found. */ - save_hidden_pointer_found = 0; - non_stack_instruction_found = 0; -+ cache->register_offsets[rd] = -imm; - continue; - } - else if (IS_SPILL_SP(op, rd, ra)) -@@ -508,6 +510,7 @@ microblaze_skip_prologue (struct gdbarch *gdbarch, CORE_ADDR start_pc) - return start_pc; - } - -+enum { REG_UNAVAIL = (CORE_ADDR) -1 }; - /* Normal frames. */ - - static struct microblaze_frame_cache * -@@ -515,7 +518,7 @@ microblaze_frame_cache (struct frame_info *next_frame, void **this_cache) - { - struct microblaze_frame_cache *cache; - struct gdbarch *gdbarch = get_frame_arch (next_frame); -- CORE_ADDR func; -+ CORE_ADDR current_pc; - int rn; - - if (*this_cache) -@@ -529,10 +532,18 @@ microblaze_frame_cache (struct frame_info *next_frame, void **this_cache) - for (rn = 0; rn < gdbarch_num_regs (gdbarch); rn++) - cache->register_offsets[rn] = -1; - -- func = get_frame_func (next_frame); -+ cache->pc = get_frame_func (next_frame); -+ current_pc = get_frame_pc (next_frame); -+ -+ if (cache->pc) -+ microblaze_analyze_prologue (gdbarch, cache->pc, current_pc, -+ cache); - - cache->base = get_frame_register_unsigned (next_frame, gdbarch_sp_regnum (gdbarch)); -- cache->pc = get_frame_address_in_block (next_frame); -+ cache->saved_sp = cache->base + cache->framesize; -+ -+ cache->register_offsets[MICROBLAZE_PREV_PC_REGNUM] = cache->base; -+ cache->register_offsets[MICROBLAZE_SP_REGNUM] = cache->saved_sp; - - return cache; - } -@@ -548,7 +559,7 @@ microblaze_frame_this_id (struct frame_info *next_frame, void **this_cache, - if (cache->base == 0) - return; - -- (*this_id) = frame_id_build (cache->base, get_frame_pc (next_frame)); -+ (*this_id) = frame_id_build (cache->base, cache->pc); - } - - static struct value * -@@ -558,6 +569,14 @@ microblaze_frame_prev_register (struct frame_info *this_frame, - struct microblaze_frame_cache *cache = - microblaze_frame_cache (this_frame, this_cache); - -+ if ((regnum == MICROBLAZE_SP_REGNUM && -+ cache->register_offsets[MICROBLAZE_SP_REGNUM]) -+ || (regnum == MICROBLAZE_FP_REGNUM && -+ cache->register_offsets[MICROBLAZE_SP_REGNUM])) -+ -+ return frame_unwind_got_constant (this_frame, regnum, -+ cache->register_offsets[MICROBLAZE_SP_REGNUM]); -+ - if (cache->frameless_p) - { - if (regnum == MICROBLAZE_PC_REGNUM) -@@ -565,11 +584,18 @@ microblaze_frame_prev_register (struct frame_info *this_frame, - if (regnum == MICROBLAZE_SP_REGNUM) - regnum = 1; - return trad_frame_get_prev_register (this_frame, -- cache->saved_regs, regnum); -+ cache->saved_regs, regnum); - } -- else -- return trad_frame_get_prev_register (this_frame, cache->saved_regs, -- regnum); -+ -+ if (regnum == MICROBLAZE_PC_REGNUM) -+ { -+ regnum = 15; -+ return frame_unwind_got_memory (this_frame, regnum, -+ cache->register_offsets[MICROBLAZE_PREV_PC_REGNUM]); -+ } -+ -+ return trad_frame_get_prev_register (this_frame, cache->saved_regs, -+ regnum); - - } - -diff --git a/gdb/microblaze-tdep.h b/gdb/microblaze-tdep.h -index cd32e9f..14eb3ab 100644 ---- a/gdb/microblaze-tdep.h -+++ b/gdb/microblaze-tdep.h -@@ -57,6 +57,7 @@ struct microblaze_frame_cache - - /* Offsets to saved registers. */ - int register_offsets[59]; /* Must match MICROBLAZE_NUM_REGS. */ -+ CORE_ADDR saved_sp; - - /* Table of saved registers. */ - struct trad_frame_saved_reg *saved_regs; -@@ -80,11 +81,11 @@ enum microblaze_regnum - MICROBLAZE_R12_REGNUM, - MICROBLAZE_R13_REGNUM, - MICROBLAZE_R14_REGNUM, -- MICROBLAZE_R15_REGNUM, -+ MICROBLAZE_R15_REGNUM, MICROBLAZE_PREV_PC_REGNUM = MICROBLAZE_R15_REGNUM, - MICROBLAZE_R16_REGNUM, - MICROBLAZE_R17_REGNUM, - MICROBLAZE_R18_REGNUM, -- MICROBLAZE_R19_REGNUM, -+ MICROBLAZE_R19_REGNUM, MICROBLAZE_FP_REGNUM = MICROBLAZE_R19_REGNUM, - MICROBLAZE_R20_REGNUM, - MICROBLAZE_R21_REGNUM, - MICROBLAZE_R22_REGNUM, --- -1.9.0 - diff --git a/meta-xilinx-bsp/recipes-microblaze/gdb/files/0009-Patch-microblaze-Initial-support-for-native-gdb.patch b/meta-xilinx-bsp/recipes-microblaze/gdb/files/0009-Patch-microblaze-Initial-support-for-native-gdb.patch deleted file mode 100644 index 1ad6b89c..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/gdb/files/0009-Patch-microblaze-Initial-support-for-native-gdb.patch +++ /dev/null @@ -1,495 +0,0 @@ -From c7b918283f2e438deef78aae84f6b748a7a1bb54 Mon Sep 17 00:00:00 2001 -From: David Holsgrove <david.holsgrove@petalogix.com> -Date: Fri, 20 Jul 2012 15:18:35 +1000 -Subject: [PATCH 09/16] [Patch, microblaze]: Initial support for native gdb - -microblaze: Follow PPC method of getting setting registers -using PTRACE PEEK/POKE - -Signed-off-by: David Holsgrove <david.holsgrove@petalogix.com> -Upstream-Status: Pending ---- - gdb/Makefile.in | 4 +- - gdb/config/microblaze/linux.mh | 10 + - gdb/microblaze-linux-nat.c | 431 +++++++++++++++++++++++++++++++++++++++++ - 3 files changed, 443 insertions(+), 2 deletions(-) - create mode 100644 gdb/config/microblaze/linux.mh - create mode 100644 gdb/microblaze-linux-nat.c - -diff --git a/gdb/Makefile.in b/gdb/Makefile.in -index f2c16ec..12870a4 100644 ---- a/gdb/Makefile.in -+++ b/gdb/Makefile.in -@@ -904,7 +904,7 @@ top.h bsd-kvm.h gdb-stabs.h reggroups.h \ - annotate.h sim-regno.h dictionary.h dfp.h main.h frame-unwind.h \ - remote-fileio.h i386-linux-tdep.h vax-tdep.h objc-lang.h \ - sentinel-frame.h bcache.h symfile.h windows-tdep.h linux-tdep.h \ --gdb_usleep.h jit.h xml-syscall.h microblaze-tdep.h \ -+gdb_usleep.h jit.h xml-syscall.h microblaze-tdep.h microblaze-linux-tdep.h \ - psymtab.h psympriv.h progspace.h bfin-tdep.h ia64-hpux-tdep.h \ - amd64-darwin-tdep.h charset-list.h \ - config/djgpp/langinfo.h config/djgpp/nl_types.h darwin-nat.h \ -@@ -1631,7 +1631,7 @@ ALLDEPFILES = \ - m68kbsd-nat.c m68kbsd-tdep.c \ - m68klinux-nat.c m68klinux-tdep.c \ - m88k-tdep.c m88kbsd-nat.c \ -- microblaze-tdep.c microblaze-linux-tdep.c \ -+ microblaze-tdep.c microblaze-linux-nat.c microblaze-linux-tdep.c \ - mingw-hdep.c \ - mips-linux-nat.c mips-linux-tdep.c \ - mips-irix-tdep.c \ -diff --git a/gdb/config/microblaze/linux.mh b/gdb/config/microblaze/linux.mh -new file mode 100644 -index 0000000..547d103 ---- /dev/null -+++ b/gdb/config/microblaze/linux.mh -@@ -0,0 +1,10 @@ -+# Host: Microblaze, running Linux -+ -+NAT_FILE= config/nm-linux.h -+NATDEPFILES= inf-ptrace.o fork-child.o \ -+ microblaze-linux-nat.o proc-service.o linux-thread-db.o \ -+ linux-nat.o linux-osdata.o linux-fork.o linux-procfs.o linux-ptrace.o \ -+ linux-waitpid.o -+NAT_CDEPS = $(srcdir)/proc-service.list -+ -+LOADLIBES = -ldl $(RDYNAMIC) -diff --git a/gdb/microblaze-linux-nat.c b/gdb/microblaze-linux-nat.c -new file mode 100644 -index 0000000..81f8346 ---- /dev/null -+++ b/gdb/microblaze-linux-nat.c -@@ -0,0 +1,431 @@ -+/* Microblaze GNU/Linux native support. -+ -+ Copyright (C) 1988-1989, 1991-1992, 1994, 1996, 2000-2012 Free -+ Software Foundation, Inc. -+ -+ This file is part of GDB. -+ -+ This program is free software; you can redistribute it and/or modify -+ it under the terms of the GNU General Public License as published by -+ the Free Software Foundation; either version 3 of the License, or -+ (at your option) any later version. -+ -+ This program is distributed in the hope that it will be useful, -+ but WITHOUT ANY WARRANTY; without even the implied warranty of -+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ GNU General Public License for more details. -+ -+ You should have received a copy of the GNU General Public License -+ along with this program. If not, see <http://www.gnu.org/licenses/>. */ -+ -+#include "defs.h" -+#include "arch-utils.h" -+#include "dis-asm.h" -+#include "frame.h" -+#include "trad-frame.h" -+#include "symtab.h" -+#include "value.h" -+#include "gdbcmd.h" -+#include "breakpoint.h" -+#include "inferior.h" -+#include "regcache.h" -+#include "target.h" -+#include "frame.h" -+#include "frame-base.h" -+#include "frame-unwind.h" -+#include "dwarf2-frame.h" -+#include "osabi.h" -+ -+#include "gdb_assert.h" -+#include <string.h> -+#include "target-descriptions.h" -+#include "opcodes/microblaze-opcm.h" -+#include "opcodes/microblaze-dis.h" -+ -+#include "linux-nat.h" -+#include "target-descriptions.h" -+ -+#include <sys/user.h> -+#include <sys/utsname.h> -+#include <sys/procfs.h> -+#include <sys/ptrace.h> -+ -+/* Prototypes for supply_gregset etc. */ -+#include "gregset.h" -+ -+#include "microblaze-tdep.h" -+ -+#include <elf/common.h> -+#include "auxv.h" -+ -+/* Defines ps_err_e, struct ps_prochandle. */ -+#include "gdb_proc_service.h" -+ -+/* On GNU/Linux, threads are implemented as pseudo-processes, in which -+ case we may be tracing more than one process at a time. In that -+ case, inferior_ptid will contain the main process ID and the -+ individual thread (process) ID. get_thread_id () is used to get -+ the thread id if it's available, and the process id otherwise. */ -+ -+int -+get_thread_id (ptid_t ptid) -+{ -+ int tid = ptid_get_lwp (ptid); -+ if (0 == tid) -+ tid = ptid_get_pid (ptid); -+ return tid; -+} -+ -+#define GET_THREAD_ID(PTID) get_thread_id (PTID) -+ -+/* Non-zero if our kernel may support the PTRACE_GETREGS and -+ PTRACE_SETREGS requests, for reading and writing the -+ general-purpose registers. Zero if we've tried one of -+ them and gotten an error. */ -+int have_ptrace_getsetregs = 1; -+ -+static int -+microblaze_register_u_addr (struct gdbarch *gdbarch, int regno) -+{ -+ int u_addr = -1; -+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch); -+ /* NOTE: cagney/2003-11-25: This is the word size used by the ptrace -+ interface, and not the wordsize of the program's ABI. */ -+ int wordsize = sizeof (long); -+ -+ /* General purpose registers occupy 1 slot each in the buffer. */ -+ if (regno >= MICROBLAZE_R0_REGNUM -+ && regno <= MICROBLAZE_FSR_REGNUM) -+ u_addr = (regno * wordsize); -+ -+ return u_addr; -+} -+ -+ -+static void -+fetch_register (struct regcache *regcache, int tid, int regno) -+{ -+ struct gdbarch *gdbarch = get_regcache_arch (regcache); -+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch); -+ /* This isn't really an address. But ptrace thinks of it as one. */ -+ CORE_ADDR regaddr = microblaze_register_u_addr (gdbarch, regno); -+ int bytes_transferred; -+ unsigned int offset; /* Offset of registers within the u area. */ -+ char buf[MAX_REGISTER_SIZE]; -+ -+ if (regaddr == -1) -+ { -+ memset (buf, '\0', register_size (gdbarch, regno)); /* Supply zeroes */ -+ regcache_raw_supply (regcache, regno, buf); -+ return; -+ } -+ -+ /* Read the raw register using sizeof(long) sized chunks. On a -+ 32-bit platform, 64-bit floating-point registers will require two -+ transfers. */ -+ for (bytes_transferred = 0; -+ bytes_transferred < register_size (gdbarch, regno); -+ bytes_transferred += sizeof (long)) -+ { -+ long l; -+ -+ errno = 0; -+ l = ptrace (PTRACE_PEEKUSER, tid, (PTRACE_TYPE_ARG3) regaddr, 0); -+ regaddr += sizeof (long); -+ if (errno != 0) -+ { -+ char message[128]; -+ sprintf (message, "reading register %s (#%d)", -+ gdbarch_register_name (gdbarch, regno), regno); -+ perror_with_name (message); -+ } -+ memcpy (&buf[bytes_transferred], &l, sizeof (l)); -+ } -+ -+ /* Now supply the register. Keep in mind that the regcache's idea -+ of the register's size may not be a multiple of sizeof -+ (long). */ -+ if (gdbarch_byte_order (gdbarch) == BFD_ENDIAN_LITTLE) -+ { -+ /* Little-endian values are always found at the left end of the -+ bytes transferred. */ -+ regcache_raw_supply (regcache, regno, buf); -+ } -+ else if (gdbarch_byte_order (gdbarch) == BFD_ENDIAN_BIG) -+ { -+ /* Big-endian values are found at the right end of the bytes -+ transferred. */ -+ size_t padding = (bytes_transferred - register_size (gdbarch, regno)); -+ regcache_raw_supply (regcache, regno, buf + padding); -+ } -+ else -+ internal_error (__FILE__, __LINE__, -+ _("fetch_register: unexpected byte order: %d"), -+ gdbarch_byte_order (gdbarch)); -+} -+ -+/* This function actually issues the request to ptrace, telling -+ it to get all general-purpose registers and put them into the -+ specified regset. -+ -+ If the ptrace request does not exist, this function returns 0 -+ and properly sets the have_ptrace_* flag. If the request fails, -+ this function calls perror_with_name. Otherwise, if the request -+ succeeds, then the regcache gets filled and 1 is returned. */ -+static int -+fetch_all_gp_regs (struct regcache *regcache, int tid) -+{ -+ struct gdbarch *gdbarch = get_regcache_arch (regcache); -+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch); -+ gdb_gregset_t gregset; -+ -+ if (ptrace (PTRACE_GETREGS, tid, 0, (void *) &gregset) < 0) -+ { -+ if (errno == EIO) -+ { -+ have_ptrace_getsetregs = 0; -+ return 0; -+ } -+ perror_with_name (_("Couldn't get general-purpose registers.")); -+ } -+ -+ supply_gregset (regcache, (const gdb_gregset_t *) &gregset); -+ -+ return 1; -+} -+ -+ -+/* This is a wrapper for the fetch_all_gp_regs function. It is -+ responsible for verifying if this target has the ptrace request -+ that can be used to fetch all general-purpose registers at one -+ shot. If it doesn't, then we should fetch them using the -+ old-fashioned way, which is to iterate over the registers and -+ request them one by one. */ -+static void -+fetch_gp_regs (struct regcache *regcache, int tid) -+{ -+ struct gdbarch *gdbarch = get_regcache_arch (regcache); -+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch); -+ int i; -+ -+ if (have_ptrace_getsetregs) -+ if (fetch_all_gp_regs (regcache, tid)) -+ return; -+ -+ /* If we've hit this point, it doesn't really matter which -+ architecture we are using. We just need to read the -+ registers in the "old-fashioned way". */ -+ for (i = MICROBLAZE_R0_REGNUM; i <= MICROBLAZE_FSR_REGNUM; i++) -+ fetch_register (regcache, tid, i); -+} -+ -+ -+static void -+store_register (const struct regcache *regcache, int tid, int regno) -+{ -+ struct gdbarch *gdbarch = get_regcache_arch (regcache); -+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch); -+ /* This isn't really an address. But ptrace thinks of it as one. */ -+ CORE_ADDR regaddr = microblaze_register_u_addr (gdbarch, regno); -+ int i; -+ size_t bytes_to_transfer; -+ char buf[MAX_REGISTER_SIZE]; -+ -+ if (regaddr == -1) -+ return; -+ -+ /* First collect the register. Keep in mind that the regcache's -+ idea of the register's size may not be a multiple of sizeof -+ (long). */ -+ memset (buf, 0, sizeof buf); -+ bytes_to_transfer = align_up (register_size (gdbarch, regno), sizeof (long)); -+ if (gdbarch_byte_order (gdbarch) == BFD_ENDIAN_LITTLE) -+ { -+ /* Little-endian values always sit at the left end of the buffer. */ -+ regcache_raw_collect (regcache, regno, buf); -+ } -+ else if (gdbarch_byte_order (gdbarch) == BFD_ENDIAN_BIG) -+ { -+ /* Big-endian values sit at the right end of the buffer. */ -+ size_t padding = (bytes_to_transfer - register_size (gdbarch, regno)); -+ regcache_raw_collect (regcache, regno, buf + padding); -+ } -+ -+ for (i = 0; i < bytes_to_transfer; i += sizeof (long)) -+ { -+ long l; -+ -+ memcpy (&l, &buf[i], sizeof (l)); -+ errno = 0; -+ ptrace (PTRACE_POKEUSER, tid, (PTRACE_TYPE_ARG3) regaddr, l); -+ regaddr += sizeof (long); -+ -+ if (errno != 0) -+ { -+ char message[128]; -+ sprintf (message, "writing register %s (#%d)", -+ gdbarch_register_name (gdbarch, regno), regno); -+ perror_with_name (message); -+ } -+ } -+} -+ -+/* This function actually issues the request to ptrace, telling -+ it to store all general-purpose registers present in the specified -+ regset. -+ -+ If the ptrace request does not exist, this function returns 0 -+ and properly sets the have_ptrace_* flag. If the request fails, -+ this function calls perror_with_name. Otherwise, if the request -+ succeeds, then the regcache is stored and 1 is returned. */ -+static int -+store_all_gp_regs (const struct regcache *regcache, int tid, int regno) -+{ -+ struct gdbarch *gdbarch = get_regcache_arch (regcache); -+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch); -+ gdb_gregset_t gregset; -+ -+ if (ptrace (PTRACE_GETREGS, tid, 0, (void *) &gregset) < 0) -+ { -+ if (errno == EIO) -+ { -+ have_ptrace_getsetregs = 0; -+ return 0; -+ } -+ perror_with_name (_("Couldn't get general-purpose registers.")); -+ } -+ -+ fill_gregset (regcache, &gregset, regno); -+ -+ if (ptrace (PTRACE_SETREGS, tid, 0, (void *) &gregset) < 0) -+ { -+ if (errno == EIO) -+ { -+ have_ptrace_getsetregs = 0; -+ return 0; -+ } -+ perror_with_name (_("Couldn't set general-purpose registers.")); -+ } -+ -+ return 1; -+} -+ -+/* This is a wrapper for the store_all_gp_regs function. It is -+ responsible for verifying if this target has the ptrace request -+ that can be used to store all general-purpose registers at one -+ shot. If it doesn't, then we should store them using the -+ old-fashioned way, which is to iterate over the registers and -+ store them one by one. */ -+static void -+store_gp_regs (const struct regcache *regcache, int tid, int regno) -+{ -+ struct gdbarch *gdbarch = get_regcache_arch (regcache); -+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch); -+ int i; -+ -+ if (have_ptrace_getsetregs) -+ if (store_all_gp_regs (regcache, tid, regno)) -+ return; -+ -+ /* If we hit this point, it doesn't really matter which -+ architecture we are using. We just need to store the -+ registers in the "old-fashioned way". */ -+ for (i = MICROBLAZE_R0_REGNUM; i <= MICROBLAZE_FSR_REGNUM; i++) -+ store_register (regcache, tid, i); -+} -+ -+ -+/* Fetch registers from the child process. Fetch all registers if -+ regno == -1, otherwise fetch all general registers or all floating -+ point registers depending upon the value of regno. */ -+ -+static void -+microblaze_linux_fetch_inferior_registers (struct target_ops *ops, -+ struct regcache *regcache, int regno) -+{ -+ /* Get the thread id for the ptrace call. */ -+ int tid = GET_THREAD_ID (inferior_ptid); -+ -+ if (regno == -1) -+ fetch_gp_regs (regcache, tid); -+ else -+ fetch_register (regcache, tid, regno); -+} -+ -+/* Store registers back into the inferior. Store all registers if -+ regno == -1, otherwise store all general registers or all floating -+ point registers depending upon the value of regno. */ -+ -+static void -+microblaze_linux_store_inferior_registers (struct target_ops *ops, -+ struct regcache *regcache, int regno) -+{ -+ /* Get the thread id for the ptrace call. */ -+ int tid = GET_THREAD_ID (inferior_ptid); -+ -+ if (regno >= 0) -+ store_register (regcache, tid, regno); -+ else -+ store_gp_regs (regcache, tid, -1); -+} -+ -+/* Wrapper functions for the standard regset handling, used by -+ thread debugging. */ -+ -+void -+fill_gregset (const struct regcache *regcache, -+ gdb_gregset_t *gregsetp, int regno) -+{ -+ microblaze_collect_gregset (NULL, regcache, regno, gregsetp); -+} -+ -+void -+supply_gregset (struct regcache *regcache, const gdb_gregset_t *gregsetp) -+{ -+ microblaze_supply_gregset (NULL, regcache, -1, gregsetp); -+} -+ -+void -+fill_fpregset (const struct regcache *regcache, -+ gdb_fpregset_t *fpregsetp, int regno) -+{ -+ /* FIXME. */ -+} -+ -+void -+supply_fpregset (struct regcache *regcache, const gdb_fpregset_t *fpregsetp) -+{ -+ /* FIXME. */ -+} -+ -+static const struct target_desc * -+microblaze_linux_read_description (struct target_ops *ops) -+{ -+ CORE_ADDR microblaze_hwcap = 0; -+ -+ if (target_auxv_search (ops, AT_HWCAP, µblaze_hwcap) != 1) -+ return NULL; -+ -+ return NULL; -+} -+ -+ -+void _initialize_microblaze_linux_nat (void); -+ -+void -+_initialize_microblaze_linux_nat (void) -+{ -+ struct target_ops *t; -+ -+ /* Fill in the generic GNU/Linux methods. */ -+ t = linux_target (); -+ -+ /* Add our register access methods. */ -+ t->to_fetch_registers = microblaze_linux_fetch_inferior_registers; -+ t->to_store_registers = microblaze_linux_store_inferior_registers; -+ -+ t->to_read_description = microblaze_linux_read_description; -+ -+ /* Register the target. */ -+ linux_nat_add_target (t); -+} --- -1.9.0 diff --git a/meta-xilinx-bsp/recipes-microblaze/gdb/files/0010-Patch-gdb-Robustify-inline-function-support.patch b/meta-xilinx-bsp/recipes-microblaze/gdb/files/0010-Patch-gdb-Robustify-inline-function-support.patch deleted file mode 100644 index 3912ca57..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/gdb/files/0010-Patch-gdb-Robustify-inline-function-support.patch +++ /dev/null @@ -1,43 +0,0 @@ -From a02963a97d7ce38b0af205f9e3e6dd7e0e06d9be Mon Sep 17 00:00:00 2001 -From: "Edgar E. Iglesias" <edgar@axis.com> -Date: Mon, 27 Feb 2012 06:28:00 +0100 -Subject: [PATCH 10/16] [Patch, gdb]: Robustify inline function support - -Signed-off-by: Edgar E. Iglesias <edgar@axis.com> -Upstream-Status: Pending ---- - gdb/blockframe.c | 3 ++- - gdb/inline-frame.c | 3 +++ - 2 files changed, 5 insertions(+), 1 deletion(-) - -diff --git a/gdb/blockframe.c b/gdb/blockframe.c -index 0a9381e..ba41d85 100644 ---- a/gdb/blockframe.c -+++ b/gdb/blockframe.c -@@ -77,7 +77,8 @@ get_frame_block (struct frame_info *frame, CORE_ADDR *addr_in_block) - inline_count--; - - bl = BLOCK_SUPERBLOCK (bl); -- gdb_assert (bl != NULL); -+ if (!bl) -+ return NULL; - } - - return bl; -diff --git a/gdb/inline-frame.c b/gdb/inline-frame.c -index eb82143..a793390 100644 ---- a/gdb/inline-frame.c -+++ b/gdb/inline-frame.c -@@ -231,6 +231,9 @@ inline_frame_sniffer (const struct frame_unwind *self, - cur_block = BLOCK_SUPERBLOCK (cur_block); - } - -+ if (depth == 0) -+ return 0; -+ - /* Check how many inlined functions already have frames. */ - for (next_frame = get_next_frame (this_frame); - next_frame && get_frame_type (next_frame) == INLINE_FRAME; --- -1.9.0 - diff --git a/meta-xilinx-bsp/recipes-microblaze/gdb/files/0011-Patch-gdb-Fix-debug-message-when-register-is-unavail.patch b/meta-xilinx-bsp/recipes-microblaze/gdb/files/0011-Patch-gdb-Fix-debug-message-when-register-is-unavail.patch deleted file mode 100644 index bdec77c5..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/gdb/files/0011-Patch-gdb-Fix-debug-message-when-register-is-unavail.patch +++ /dev/null @@ -1,43 +0,0 @@ -From a05fb34192727fc1b63c827ed006ddde846ce6b8 Mon Sep 17 00:00:00 2001 -From: Nathan Rossi <nathan.rossi@petalogix.com> -Date: Tue, 8 May 2012 18:11:17 +1000 -Subject: [PATCH 11/16] [Patch, gdb]: Fix debug message when register is - unavailable - -Signed-off-by: Nathan Rossi <nathan.rossi@xilinx.com> -Signed-off-by: David Holsgrove <david.holsgrove@xilinx.com> -Upstream-Status: Pending ---- - gdb/frame.c | 13 ++++++++++--- - 1 file changed, 10 insertions(+), 3 deletions(-) - -diff --git a/gdb/frame.c b/gdb/frame.c -index 013d602..4d0766f 100644 ---- a/gdb/frame.c -+++ b/gdb/frame.c -@@ -1134,12 +1134,19 @@ frame_unwind_register_value (struct frame_info *frame, int regnum) - else - { - int i; -- const gdb_byte *buf = value_contents (value); -+ const gdb_byte *buf = NULL; -+ if (value_entirely_available(value)) { -+ buf = value_contents (value); -+ } - - fprintf_unfiltered (gdb_stdlog, " bytes="); - fprintf_unfiltered (gdb_stdlog, "["); -- for (i = 0; i < register_size (gdbarch, regnum); i++) -- fprintf_unfiltered (gdb_stdlog, "%02x", buf[i]); -+ if (buf != NULL) { -+ for (i = 0; i < register_size (gdbarch, regnum); i++) -+ fprintf_unfiltered (gdb_stdlog, "%02x", buf[i]); -+ } else { -+ fprintf_unfiltered (gdb_stdlog, "unavailable"); -+ } - fprintf_unfiltered (gdb_stdlog, "]"); - } - } --- -1.9.0 - diff --git a/meta-xilinx-bsp/recipes-microblaze/gdb/files/0012-LOCAL-Disable-the-warning-message-for-eh_frame_hdr.patch b/meta-xilinx-bsp/recipes-microblaze/gdb/files/0012-LOCAL-Disable-the-warning-message-for-eh_frame_hdr.patch deleted file mode 100644 index 819cd179..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/gdb/files/0012-LOCAL-Disable-the-warning-message-for-eh_frame_hdr.patch +++ /dev/null @@ -1,34 +0,0 @@ -From f54d5334afe799e15ca21c5d83097a4c81bbab7e Mon Sep 17 00:00:00 2001 -From: "Edgar E. Iglesias" <edgar.iglesias@gmail.com> -Date: Fri, 22 Jun 2012 01:20:20 +0200 -Subject: [PATCH 12/16] [LOCAL]: Disable the warning message for eh_frame_hdr - -Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> -Upstream-Status: Pending ---- - bfd/elf-eh-frame.c | 9 ++++++--- - 1 file changed, 6 insertions(+), 3 deletions(-) - -diff --git a/bfd/elf-eh-frame.c b/bfd/elf-eh-frame.c -index 0f0a563..7d8e047 100644 ---- a/bfd/elf-eh-frame.c -+++ b/bfd/elf-eh-frame.c -@@ -919,9 +919,12 @@ _bfd_elf_parse_eh_frame (bfd *abfd, struct bfd_link_info *info, - goto success; - - free_no_table: -- (*info->callbacks->einfo) -- (_("%P: error in %B(%A); no .eh_frame_hdr table will be created.\n"), -- abfd, sec); -+ /* FIXME: Remove the microblaze specifics when relaxing gets fixed. */ -+ if (bfd_get_arch(abfd) != bfd_arch_microblaze) { -+ (*info->callbacks->einfo) -+ (_("%P: error in %B(%A); no .eh_frame_hdr table will be created.\n"), -+ abfd, sec); -+ } - hdr_info->table = FALSE; - if (sec_info) - free (sec_info); --- -1.9.0 - diff --git a/meta-xilinx-bsp/recipes-microblaze/gdb/files/0013-LOCAL-Fix-relaxation-of-assembler-resolved-reference.patch b/meta-xilinx-bsp/recipes-microblaze/gdb/files/0013-LOCAL-Fix-relaxation-of-assembler-resolved-reference.patch deleted file mode 100644 index 3a0eae83..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/gdb/files/0013-LOCAL-Fix-relaxation-of-assembler-resolved-reference.patch +++ /dev/null @@ -1,64 +0,0 @@ -From c9f1f07e5b0756069e3d4b04eb9505027f09677f Mon Sep 17 00:00:00 2001 -From: "Edgar E. Iglesias" <edgar.iglesias@gmail.com> -Date: Tue, 14 Feb 2012 01:00:22 +0100 -Subject: [PATCH 13/16] [LOCAL]: Fix relaxation of assembler resolved - references - -Upstream-Status: Pending ---- - bfd/elf32-microblaze.c | 39 +++++++++++++++++++++++++++++++++++++++ - 1 file changed, 39 insertions(+) - -diff --git a/bfd/elf32-microblaze.c b/bfd/elf32-microblaze.c -index cbd18f0..f90df47 100644 ---- a/bfd/elf32-microblaze.c -+++ b/bfd/elf32-microblaze.c -@@ -1968,6 +1968,45 @@ microblaze_elf_relax_section (bfd *abfd, - irelscanend = irelocs + o->reloc_count; - for (irelscan = irelocs; irelscan < irelscanend; irelscan++) - { -+ if (ELF32_R_TYPE (irelscan->r_info) == (int) R_MICROBLAZE_NONE) -+ { -+ unsigned int val; -+ -+ isym = isymbuf + ELF32_R_SYM (irelscan->r_info); -+ -+ /* This was a PC-relative instruction that was completely resolved. */ -+ if (ocontents == NULL) -+ { -+ if (elf_section_data (o)->this_hdr.contents != NULL) -+ ocontents = elf_section_data (o)->this_hdr.contents; -+ else -+ { -+ /* We always cache the section contents. -+ Perhaps, if info->keep_memory is FALSE, we -+ should free them, if we are permitted to. */ -+ -+ if (o->rawsize == 0) -+ o->rawsize = o->size; -+ ocontents = (bfd_byte *) bfd_malloc (o->rawsize); -+ if (ocontents == NULL) -+ goto error_return; -+ if (!bfd_get_section_contents (abfd, o, ocontents, -+ (file_ptr) 0, -+ o->rawsize)) -+ goto error_return; -+ elf_section_data (o)->this_hdr.contents = ocontents; -+ } -+ } -+ -+ irelscan->r_addend -= calc_fixup (irelscan->r_addend -+ + isym->st_value, sec); -+ val = bfd_get_32 (abfd, ocontents + irelscan->r_offset); -+ microblaze_bfd_write_imm_value_32 (abfd, ocontents + irelscan->r_offset, -+ irelscan->r_addend); -+ } -+ if (ELF32_R_TYPE (irelscan->r_info) == (int) R_MICROBLAZE_64_NONE) { -+ fprintf(stderr, "Unhandled NONE 64\n"); -+ } - if (ELF32_R_TYPE (irelscan->r_info) == (int) R_MICROBLAZE_32) - { - isym = isymbuf + ELF32_R_SYM (irelscan->r_info); --- -1.9.0 - diff --git a/meta-xilinx-bsp/recipes-microblaze/gdb/files/0014-LOCAL-Fixup-debug_loc-sections-after-linker-relaxati.patch b/meta-xilinx-bsp/recipes-microblaze/gdb/files/0014-LOCAL-Fixup-debug_loc-sections-after-linker-relaxati.patch deleted file mode 100644 index 85cee9d5..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/gdb/files/0014-LOCAL-Fixup-debug_loc-sections-after-linker-relaxati.patch +++ /dev/null @@ -1,192 +0,0 @@ -From aca2758cff1f8fdc5ad7b6076ef985ba9ec5f857 Mon Sep 17 00:00:00 2001 -From: David Holsgrove <david.holsgrove@xilinx.com> -Date: Mon, 4 Feb 2013 12:15:22 +1000 -Subject: [PATCH 14/16] [LOCAL]: Fixup debug_loc sections after linker - relaxation - -Adds a new reloctype R_MICROBLAZE_32_NONE, used for passing -reloc info from the assembler to the linker when the linker -manages to fully resolve a local symbol reference. - -This is a workaround for design flaws in the assembler to -linker interface with regards to linker relaxation. - -Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> -Signed-off-by: David Holsgrove <david.holsgrove@xilinx.com> -Upstream-Status: Pending ---- - bfd/bfd-in2.h | 5 +++++ - bfd/elf32-microblaze.c | 45 +++++++++++++++++++++++++++++++++++++-------- - bfd/libbfd.h | 1 + - bfd/reloc.c | 6 ++++++ - include/elf/microblaze.h | 1 + - 5 files changed, 50 insertions(+), 8 deletions(-) - -diff --git a/bfd/bfd-in2.h b/bfd/bfd-in2.h -index 8b7f2ee..de38907 100644 ---- a/bfd/bfd-in2.h -+++ b/bfd/bfd-in2.h -@@ -5449,6 +5449,11 @@ value relative to the read-write small data area anchor */ - expressions of the form "Symbol Op Symbol" */ - BFD_RELOC_MICROBLAZE_32_SYM_OP_SYM, - -+/* This is a 32 bit reloc that stores the 32 bit pc relative -+value in two words (with an imm instruction). No relocation is -+done here - only used for relaxing */ -+ BFD_RELOC_MICROBLAZE_32_NONE, -+ - /* This is a 64 bit reloc that stores the 32 bit pc relative - value in two words (with an imm instruction). No relocation is - done here - only used for relaxing */ -diff --git a/bfd/elf32-microblaze.c b/bfd/elf32-microblaze.c -index f90df47..a3f89b9 100644 ---- a/bfd/elf32-microblaze.c -+++ b/bfd/elf32-microblaze.c -@@ -177,6 +177,20 @@ static reloc_howto_type microblaze_elf_howto_raw[] = - FALSE), /* PC relative offset? */ - - /* This reloc does nothing. Used for relaxation. */ -+ HOWTO (R_MICROBLAZE_32_NONE, /* Type. */ -+ 0, /* Rightshift. */ -+ 2, /* Size (0 = byte, 1 = short, 2 = long). */ -+ 32, /* Bitsize. */ -+ TRUE, /* PC_relative. */ -+ 0, /* Bitpos. */ -+ complain_overflow_bitfield, /* Complain on overflow. */ -+ NULL, /* Special Function. */ -+ "R_MICROBLAZE_32_NONE",/* Name. */ -+ FALSE, /* Partial Inplace. */ -+ 0, /* Source Mask. */ -+ 0, /* Dest Mask. */ -+ FALSE), /* PC relative offset? */ -+ - HOWTO (R_MICROBLAZE_64_NONE, /* Type. */ - 0, /* Rightshift. */ - 2, /* Size (0 = byte, 1 = short, 2 = long). */ -@@ -532,7 +546,10 @@ microblaze_elf_reloc_type_lookup (bfd * abfd ATTRIBUTE_UNUSED, - case BFD_RELOC_NONE: - microblaze_reloc = R_MICROBLAZE_NONE; - break; -- case BFD_RELOC_MICROBLAZE_64_NONE: -+ case BFD_RELOC_MICROBLAZE_32_NONE: -+ microblaze_reloc = R_MICROBLAZE_32_NONE; -+ break; -+ case BFD_RELOC_MICROBLAZE_64_NONE: - microblaze_reloc = R_MICROBLAZE_64_NONE; - break; - case BFD_RELOC_32: -@@ -1913,14 +1930,22 @@ microblaze_elf_relax_section (bfd *abfd, - } - break; - case R_MICROBLAZE_NONE: -+ case R_MICROBLAZE_32_NONE: - { - /* This was a PC-relative instruction that was - completely resolved. */ - int sfix, efix; -+ unsigned int val; - bfd_vma target_address; - target_address = irel->r_addend + irel->r_offset; - sfix = calc_fixup (irel->r_offset, 0, sec); - efix = calc_fixup (target_address, 0, sec); -+ -+ /* Validate the in-band val. */ -+ val = bfd_get_32 (abfd, contents + irel->r_offset); -+ if (val != irel->r_addend && ELF32_R_TYPE (irel->r_info) == R_MICROBLAZE_32_NONE) { -+ fprintf(stderr, "%d: CORRUPT relax reloc %x %lx\n", __LINE__, val, irel->r_addend); -+ } - irel->r_addend -= (efix - sfix); - /* Should use HOWTO. */ - microblaze_bfd_write_imm_value_32 (abfd, contents + irel->r_offset, -@@ -1968,12 +1993,16 @@ microblaze_elf_relax_section (bfd *abfd, - irelscanend = irelocs + o->reloc_count; - for (irelscan = irelocs; irelscan < irelscanend; irelscan++) - { -- if (ELF32_R_TYPE (irelscan->r_info) == (int) R_MICROBLAZE_NONE) -+ if (1 && ELF32_R_TYPE (irelscan->r_info) == (int) R_MICROBLAZE_32_NONE) - { - unsigned int val; - - isym = isymbuf + ELF32_R_SYM (irelscan->r_info); - -+ /* hax: We only do the following fixup for debug location lists. */ -+ if (strcmp(".debug_loc", o->name)) -+ continue; -+ - /* This was a PC-relative instruction that was completely resolved. */ - if (ocontents == NULL) - { -@@ -1998,15 +2027,15 @@ microblaze_elf_relax_section (bfd *abfd, - } - } - -- irelscan->r_addend -= calc_fixup (irelscan->r_addend -- + isym->st_value, sec); - val = bfd_get_32 (abfd, ocontents + irelscan->r_offset); -+ if (val != irelscan->r_addend) { -+ fprintf(stderr, "%d: CORRUPT relax reloc! %x %lx\n", __LINE__, val, irelscan->r_addend); -+ } -+ -+ irelscan->r_addend -= calc_fixup (irelscan->r_addend, 0, sec); - microblaze_bfd_write_imm_value_32 (abfd, ocontents + irelscan->r_offset, - irelscan->r_addend); - } -- if (ELF32_R_TYPE (irelscan->r_info) == (int) R_MICROBLAZE_64_NONE) { -- fprintf(stderr, "Unhandled NONE 64\n"); -- } - if (ELF32_R_TYPE (irelscan->r_info) == (int) R_MICROBLAZE_32) - { - isym = isymbuf + ELF32_R_SYM (irelscan->r_info); -@@ -2066,7 +2095,7 @@ microblaze_elf_relax_section (bfd *abfd, - elf_section_data (o)->this_hdr.contents = ocontents; - } - } -- irelscan->r_addend -= calc_fixup (irel->r_addend -+ irelscan->r_addend -= calc_fixup (irelscan->r_addend - + isym->st_value, - 0, - sec); -diff --git a/bfd/libbfd.h b/bfd/libbfd.h -index 09f307f..840c662 100644 ---- a/bfd/libbfd.h -+++ b/bfd/libbfd.h -@@ -2644,6 +2644,7 @@ static const char *const bfd_reloc_code_real_names[] = { "@@uninitialized@@", - "BFD_RELOC_MICROBLAZE_32_ROSDA", - "BFD_RELOC_MICROBLAZE_32_RWSDA", - "BFD_RELOC_MICROBLAZE_32_SYM_OP_SYM", -+ "BFD_RELOC_MICROBLAZE_32_NONE", - "BFD_RELOC_MICROBLAZE_64_NONE", - "BFD_RELOC_MICROBLAZE_64_GOTPC", - "BFD_RELOC_MICROBLAZE_64_GOT", -diff --git a/bfd/reloc.c b/bfd/reloc.c -index 7f46c58..5bcd52d 100644 ---- a/bfd/reloc.c -+++ b/bfd/reloc.c -@@ -6396,6 +6396,12 @@ ENUMDOC - This is a 32 bit reloc for the microblaze to handle - expressions of the form "Symbol Op Symbol" - ENUM -+ BFD_RELOC_MICROBLAZE_32_NONE -+ENUMDOC -+ This is a 32 bit reloc that stores the 32 bit pc relative -+ value in two words (with an imm instruction). No relocation is -+ done here - only used for relaxing -+ENUM - BFD_RELOC_MICROBLAZE_64_NONE - ENUMDOC - This is a 64 bit reloc that stores the 32 bit pc relative -diff --git a/include/elf/microblaze.h b/include/elf/microblaze.h -index effca20..f8420dc 100644 ---- a/include/elf/microblaze.h -+++ b/include/elf/microblaze.h -@@ -58,6 +58,7 @@ START_RELOC_NUMBERS (elf_microblaze_reloc_type) - RELOC_NUMBER (R_MICROBLAZE_TLSDTPREL64, 27) /* TLS Offset Within TLS Block */ - RELOC_NUMBER (R_MICROBLAZE_TLSGOTTPREL32, 28) /* TLS Offset From Thread Pointer */ - RELOC_NUMBER (R_MICROBLAZE_TLSTPREL32, 29) /* TLS Offset From Thread Pointer */ -+ RELOC_NUMBER (R_MICROBLAZE_32_NONE, 30) - - END_RELOC_NUMBERS (R_MICROBLAZE_max) - --- -1.9.0 - diff --git a/meta-xilinx-bsp/recipes-microblaze/gdb/files/0015-LOCAL-upstream-change-to-garbage-collection-sweep-ca.patch b/meta-xilinx-bsp/recipes-microblaze/gdb/files/0015-LOCAL-upstream-change-to-garbage-collection-sweep-ca.patch deleted file mode 100644 index 0bb66a94..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/gdb/files/0015-LOCAL-upstream-change-to-garbage-collection-sweep-ca.patch +++ /dev/null @@ -1,40 +0,0 @@ -From 22c63d4d79ac488403340470c14c73bad4984fa3 Mon Sep 17 00:00:00 2001 -From: David Holsgrove <david.holsgrove@xilinx.com> -Date: Wed, 27 Feb 2013 13:56:11 +1000 -Subject: [PATCH 15/16] [LOCAL]: upstream change to garbage collection sweep - causes mb regression - -Upstream change for PR13177 now clears the def_regular during gc_sweep of a -section. (All other archs in binutils/bfd/elf32-*.c received an update -to a warning about unresolvable relocations - this warning is not present -in binutils/bfd/elf32-microblaze.c, but this warning check would not -prevent the error being seen) - -The visible issue with this change is when running a c++ application -in Petalinux which links libstdc++.so for exception handling it segfaults -on execution. - -This does not occur if static linking libstdc++.a, so its during the -relocations for a shared lib with garbage collection this occurs - -Signed-off-by: David Holsgrove <david.holsgrove@xilinx.com> -Upstream-Status: Pending ---- - bfd/elflink.c | 1 - - 1 file changed, 1 deletion(-) - -diff --git a/bfd/elflink.c b/bfd/elflink.c -index 6756fb1..f21dc06 100644 ---- a/bfd/elflink.c -+++ b/bfd/elflink.c -@@ -11932,7 +11932,6 @@ elf_gc_sweep_symbol (struct elf_link_hash_entry *h, void *data) - - inf = (struct elf_gc_sweep_symbol_info *) data; - (*inf->hide_symbol) (inf->info, h, TRUE); -- h->def_regular = 0; - h->ref_regular = 0; - h->ref_regular_nonweak = 0; - } --- -1.9.0 - diff --git a/meta-xilinx-bsp/recipes-microblaze/gdb/gdb-7.7.1.inc b/meta-xilinx-bsp/recipes-microblaze/gdb/gdb-7.7.1.inc deleted file mode 100644 index 396f0fc1..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/gdb/gdb-7.7.1.inc +++ /dev/null @@ -1,12 +0,0 @@ -LICENSE = "GPLv2 & GPLv3 & LGPLv2 & LGPLv3" -LIC_FILES_CHKSUM = "file://COPYING;md5=59530bdf33659b29e73d4adb9f9f6552 \ - file://COPYING3;md5=d32239bcb673463ab874e80d47fae504 \ - file://COPYING3.LIB;md5=6a6a8e020838b23406c81b19c1d46df6 \ - file://COPYING.LIB;md5=9f604d8a4f8e74f4f5140845a21b6674" - -S = "${WORKDIR}/${BPN}-${PV}" - -SRC_URI = "${GNU_MIRROR}/gdb/gdb-${PV}.tar.gz" -SRC_URI[md5sum] = "45b07b53d81832d32ccd4829465d4886" -SRC_URI[sha256sum] = "eefadb9831e3695d1eaef34e98b8f1fb441df6fe5071317ea49c6bd6ba213eff" - diff --git a/meta-xilinx-bsp/recipes-microblaze/gdb/gdb-cross-canadian_7.7.1.bb b/meta-xilinx-bsp/recipes-microblaze/gdb/gdb-cross-canadian_7.7.1.bb deleted file mode 100644 index c349ebbb..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/gdb/gdb-cross-canadian_7.7.1.bb +++ /dev/null @@ -1,4 +0,0 @@ -require recipes-devtools/gdb/gdb-common.inc -require recipes-devtools/gdb/gdb-cross-canadian.inc -require gdb-${PV}.inc -require gdb-microblaze-7.7.inc diff --git a/meta-xilinx-bsp/recipes-microblaze/gdb/gdb-cross_7.7.1.bb b/meta-xilinx-bsp/recipes-microblaze/gdb/gdb-cross_7.7.1.bb deleted file mode 100644 index 98b3359c..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/gdb/gdb-cross_7.7.1.bb +++ /dev/null @@ -1,3 +0,0 @@ -require recipes-devtools/gdb/gdb-cross.inc -require gdb-${PV}.inc -require gdb-microblaze-7.7.inc diff --git a/meta-xilinx-bsp/recipes-microblaze/gdb/gdb-microblaze-7.7.inc b/meta-xilinx-bsp/recipes-microblaze/gdb/gdb-microblaze-7.7.inc deleted file mode 100644 index d1aba822..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/gdb/gdb-microblaze-7.7.inc +++ /dev/null @@ -1,22 +0,0 @@ - -# MicroBlaze does not support LTTng UST -LTTNGUST_microblaze = "" - -# Add MicroBlaze Patches -FILESEXTRAPATHS_append := "${THISDIR}/files:" -SRC_URI_append = " \ - file://0001-Patch-microblaze-Add-wdc.ext.clear-and-wdc.ext.flush.patch \ - file://0003-Patch-microblaze-Initial-port-of-microblaze-core-rea.patch \ - file://0004-Patch-microblaze-Communicate-in-larger-blocks-with-t.patch \ - file://0005-Patch-microblaze-Add-mb-singlestepping.patch \ - file://0006-Patch-microblaze-Add-initial-port-of-linux-gdbserver.patch \ - file://0007-Patch-microblaze-Add-slr-and-shr-regs-and-little-end.patch \ - file://0008-Patch-microblaze-Added-Backtrace-support-to-GDB.patch \ - file://0009-Patch-microblaze-Initial-support-for-native-gdb.patch \ - file://0010-Patch-gdb-Robustify-inline-function-support.patch \ - file://0011-Patch-gdb-Fix-debug-message-when-register-is-unavail.patch \ - file://0012-LOCAL-Disable-the-warning-message-for-eh_frame_hdr.patch \ - file://0013-LOCAL-Fix-relaxation-of-assembler-resolved-reference.patch \ - file://0014-LOCAL-Fixup-debug_loc-sections-after-linker-relaxati.patch \ - file://0015-LOCAL-upstream-change-to-garbage-collection-sweep-ca.patch \ - " diff --git a/meta-xilinx-bsp/recipes-microblaze/gdb/gdb_7.7.1.bb b/meta-xilinx-bsp/recipes-microblaze/gdb/gdb_7.7.1.bb deleted file mode 100644 index 80b589a1..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/gdb/gdb_7.7.1.bb +++ /dev/null @@ -1,29 +0,0 @@ -require recipes-devtools/gdb/gdb-common.inc -require gdb-${PV}.inc -require gdb-microblaze-7.7.inc - -inherit gettext -inherit python-dir - -PACKAGECONFIG ??= "" -PACKAGECONFIG[python] = "--with-python=${WORKDIR}/python,--without-python,python" -PACKAGECONFIG[babeltrace] = "--with-babeltrace,--without-babeltrace,babeltrace" - -do_configure_prepend() { - if [ -n "${@bb.utils.contains('PACKAGECONFIG', 'python', 'python', '', d)}" ]; then - cat > ${WORKDIR}/python << EOF -#!/bin/sh -case "\$2" in - --includes) echo "-I${STAGING_INCDIR}/${PYTHON_DIR}/" ;; - --ldflags) echo "-Wl,-rpath-link,${STAGING_LIBDIR}/.. -Wl,-rpath,${libdir}/.. -lpthread -ldl -lutil -lm -lpython${PYTHON_BASEVERSION}" ;; - --exec-prefix) echo "${exec_prefix}" ;; - *) exit 1 ;; -esac -exit 0 -EOF - chmod +x ${WORKDIR}/python - fi -} - -PACKAGES =+ "gdbserver" -FILES_gdbserver = "${bindir}/gdbserver" diff --git a/meta-xilinx-bsp/recipes-microblaze/qemu/qemu_%.bbappend b/meta-xilinx-bsp/recipes-microblaze/qemu/qemu_%.bbappend deleted file mode 100644 index 3d3a54fe..00000000 --- a/meta-xilinx-bsp/recipes-microblaze/qemu/qemu_%.bbappend +++ /dev/null @@ -1,2 +0,0 @@ -QEMU_TARGETS += "microblazeel microblaze" - diff --git a/meta-xilinx-bsp/recipes-multimedia/vcu/kernel-module-vcu.bb b/meta-xilinx-bsp/recipes-multimedia/vcu/kernel-module-vcu.bb deleted file mode 100644 index 3c13c697..00000000 --- a/meta-xilinx-bsp/recipes-multimedia/vcu/kernel-module-vcu.bb +++ /dev/null @@ -1,29 +0,0 @@ -SUMMARY = "Linux kernel module for Video Code Unit" -DESCRIPTION = "Out-of-tree VCU decoder, encoder and common kernel modules provider for MPSoC EV devices" -SECTION = "kernel/modules" -LICENSE = "GPLv2" -LIC_FILES_CHKSUM = "file://LICENSE.md;md5=eb723b61539feef013de476e68b5c50a" - -XILINX_VCU_VERSION = "1.0.0" -XILINX_RELEASE_VERSION = "v2019.1" -PV = "${XILINX_VCU_VERSION}-xilinx-${XILINX_RELEASE_VERSION}+git${SRCPV}" - -S = "${WORKDIR}/git" - -BRANCH ?= "master-rel-2019.1" -REPO ?= "git://github.com/xilinx/vcu-modules.git;protocol=https" -SRCREV ?= "13a8e5b3f614d94081481a808aa8d4bd00b26d76" - -BRANCHARG = "${@['nobranch=1', 'branch=${BRANCH}'][d.getVar('BRANCH', True) != '']}" -SRC_URI = "${REPO};${BRANCHARG}" - -inherit module - -EXTRA_OEMAKE += "O=${STAGING_KERNEL_BUILDDIR}" - -RDEPENDS_${PN} = "vcu-firmware" - -COMPATIBLE_MACHINE = "^$" -COMPATIBLE_MACHINE_zynqmp = "zynqmp" - -PACKAGE_ARCH = "${SOC_FAMILY}" diff --git a/meta-xilinx-bsp/recipes-multimedia/vcu/libomxil-xlnx.bb b/meta-xilinx-bsp/recipes-multimedia/vcu/libomxil-xlnx.bb deleted file mode 100644 index 25bbffe9..00000000 --- a/meta-xilinx-bsp/recipes-multimedia/vcu/libomxil-xlnx.bb +++ /dev/null @@ -1,51 +0,0 @@ -SUMMARY = "OpenMAX Integration layer for VCU" -DESCRIPTION = "OMX IL Libraries,test applications and headers for VCU" -LICENSE = "Proprietary" -LIC_FILES_CHKSUM = "file://LICENSE.md;md5=03a7aef7e6f6a76a59fd9b8ba450b493" - -XILINX_VCU_VERSION = "1.0.0" -XILINX_RELEASE_VERSION = "v2019.1" -PV = "${XILINX_VCU_VERSION}-xilinx-${XILINX_RELEASE_VERSION}+git${SRCPV}" - -BRANCH ?= "master-rel-2019.1" -REPO ?= "git://github.com/xilinx/vcu-omx-il.git;protocol=https" -SRCREV ?= "b93cec02cd5da223fa965073dce130a08ffd6419" - -BRANCHARG = "${@['nobranch=1', 'branch=${BRANCH}'][d.getVar('BRANCH', True) != '']}" -SRC_URI = "${REPO};${BRANCHARG}" - -S = "${WORKDIR}/git" - -COMPATIBLE_MACHINE = "^$" -COMPATIBLE_MACHINE_zynqmp = "zynqmp" - -PACKAGE_ARCH = "${SOC_FAMILY}" - -DEPENDS = "libvcu-xlnx" -RDEPENDS_${PN} = "kernel-module-vcu libvcu-xlnx" - -EXTERNAL_INCLUDE="${STAGING_INCDIR}/vcu-ctrl-sw/include" - -EXTRA_OEMAKE = " \ - CC='${CC}' CXX='${CXX} ${CXXFLAGS}' \ - EXTERNAL_INCLUDE='${EXTERNAL_INCLUDE}' \ - " - -do_install() { - install -d ${D}${libdir} - install -d ${D}${includedir}/vcu-omx-il - - install -m 0644 ${S}/omx_header/*.h ${D}${includedir}/vcu-omx-il - - install -Dm 0755 ${S}/bin/omx_decoder ${D}/${bindir}/omx_decoder - install -Dm 0755 ${S}/bin/omx_encoder ${D}/${bindir}/omx_encoder - - oe_libinstall -C ${S}/bin/ -so libOMX.allegro.core ${D}/${libdir}/ - oe_libinstall -C ${S}/bin/ -so libOMX.allegro.video_decoder ${D}/${libdir}/ - oe_libinstall -C ${S}/bin/ -so libOMX.allegro.video_encoder ${D}/${libdir}/ -} - -# These libraries shouldn't get installed in world builds unless something -# explicitly depends upon them. - -EXCLUDE_FROM_WORLD = "1" diff --git a/meta-xilinx-bsp/recipes-multimedia/vcu/libvcu-xlnx.bb b/meta-xilinx-bsp/recipes-multimedia/vcu/libvcu-xlnx.bb deleted file mode 100644 index 8f8c0ef2..00000000 --- a/meta-xilinx-bsp/recipes-multimedia/vcu/libvcu-xlnx.bb +++ /dev/null @@ -1,43 +0,0 @@ -SUMMARY = "Control Software for VCU" -DESCRIPTION = "Control software libraries, test applications and headers provider for VCU" -LICENSE = "Proprietary" -LIC_FILES_CHKSUM = "file://LICENSE.md;md5=03a7aef7e6f6a76a59fd9b8ba450b493" - -XILINX_VCU_VERSION = "1.0.0" -XILINX_RELEASE_VERSION = "v2019.1" -PV = "${XILINX_VCU_VERSION}-xilinx-${XILINX_RELEASE_VERSION}+git${SRCPV}" - -BRANCH ?= "master-rel-2019.1" -REPO ?= "git://github.com/xilinx/vcu-ctrl-sw.git;protocol=https" -SRCREV ?= "32b7be620987283f62e4469185da81dddad1071c" - -BRANCHARG = "${@['nobranch=1', 'branch=${BRANCH}'][d.getVar('BRANCH', True) != '']}" -SRC_URI = "${REPO};${BRANCHARG}" - -S = "${WORKDIR}/git" - -COMPATIBLE_MACHINE = "^$" -COMPATIBLE_MACHINE_zynqmp = "zynqmp" - -PACKAGE_ARCH = "${SOC_FAMILY}" - -RDEPENDS_${PN} = "kernel-module-vcu" - -EXTRA_OEMAKE = "CC='${CC}' CXX='${CXX} ${CXXFLAGS}'" - -do_install() { - install -d ${D}${libdir} - install -d ${D}${includedir}/vcu-ctrl-sw/include - - install -Dm 0755 ${S}/bin/ctrlsw_encoder ${D}/${bindir}/ctrlsw_encoder - install -Dm 0755 ${S}/bin/ctrlsw_decoder ${D}/${bindir}/ctrlsw_decoder - - oe_runmake install_headers INSTALL_HDR_PATH=${D}${includedir}/vcu-ctrl-sw/include - oe_libinstall -C ${S}/bin/ -so liballegro_decode ${D}/${libdir}/ - oe_libinstall -C ${S}/bin/ -so liballegro_encode ${D}/${libdir}/ -} - -# These libraries shouldn't get installed in world builds unless something -# explicitly depends upon them. - -EXCLUDE_FROM_WORLD = "1" diff --git a/meta-xilinx-bsp/recipes-multimedia/vcu/vcu-firmware.bb b/meta-xilinx-bsp/recipes-multimedia/vcu/vcu-firmware.bb deleted file mode 100644 index 28bd0d37..00000000 --- a/meta-xilinx-bsp/recipes-multimedia/vcu/vcu-firmware.bb +++ /dev/null @@ -1,40 +0,0 @@ -SUMMARY = "Firmware for VCU" -DESCRIPTION = "Firmware binaries provider for VCU" -LICENSE = "Proprietary" -LIC_FILES_CHKSUM = "file://LICENSE;md5=63b45903a9a50120df488435f03cf498" - -XILINX_VCU_VERSION = "1.0.0" -XILINX_RELEASE_VERSION = "v2019.1" -PV = "${XILINX_VCU_VERSION}-xilinx-${XILINX_RELEASE_VERSION}+git${SRCPV}" - -S = "${WORKDIR}/git" - -BRANCH ?= "master-rel-2019.1" -REPO ?= "git://github.com/xilinx/vcu-firmware.git;protocol=https" -SRCREV ?= "4078b74d16e5eccca5ae3132c3877d3aff7fb168" - -BRANCHARG = "${@['nobranch=1', 'branch=${BRANCH}'][d.getVar('BRANCH', True) != '']}" -SRC_URI = "${REPO};${BRANCHARG}" - -COMPATIBLE_MACHINE = "^$" -COMPATIBLE_MACHINE_zynqmp = "zynqmp" - -PACKAGE_ARCH = "${SOC_FAMILY}" - -do_install() { - install -Dm 0644 ${S}/${XILINX_VCU_VERSION}/lib/firmware/al5d_b.fw ${D}/lib/firmware/al5d_b.fw - install -Dm 0644 ${S}/${XILINX_VCU_VERSION}/lib/firmware/al5d.fw ${D}/lib/firmware/al5d.fw - install -Dm 0644 ${S}/${XILINX_VCU_VERSION}/lib/firmware/al5e_b.fw ${D}/lib/firmware/al5e_b.fw - install -Dm 0644 ${S}/${XILINX_VCU_VERSION}/lib/firmware/al5e.fw ${D}/lib/firmware/al5e.fw -} - -# Inhibit warnings about files being stripped -INHIBIT_PACKAGE_DEBUG_SPLIT = "1" -INHIBIT_PACKAGE_STRIP = "1" -FILES_${PN} = "/lib/firmware/*" - -# These libraries shouldn't get installed in world builds unless something -# explicitly depends upon them. -EXCLUDE_FROM_WORLD = "1" - -INSANE_SKIP_${PN} = "ldflags" diff --git a/meta-xilinx-bsp/recipes-xrt/ocl-icd/ocl-icd_git.bb b/meta-xilinx-bsp/recipes-xrt/ocl-icd/ocl-icd_git.bb deleted file mode 100644 index d14ec53e..00000000 --- a/meta-xilinx-bsp/recipes-xrt/ocl-icd/ocl-icd_git.bb +++ /dev/null @@ -1,19 +0,0 @@ -SUMMARY = "OpenCL ICD library" -DESCRIPTION = "Open Source alternative to vendor specific OpenCL ICD loaders." - -# The LICENSE is BSD 2-Clause "Simplified" License -LICENSE = "BSD-2-Clause" -LIC_FILES_CHKSUM = "file://COPYING;md5=232257bbf7320320725ca9529d3782ab" - -SRC_URI = "git://github.com/OCL-dev/ocl-icd.git;protocol=https" - -PV = "2.2.12+git${SRCPV}" -SRCREV = "af79aebe4649f30dbd711c1bf6fc661eac6e5f01" - -S = "${WORKDIR}/git" - -inherit autotools - -DEPENDS = "ruby-native" - -BBCLASSEXTEND = "native" diff --git a/meta-xilinx-bsp/recipes-xrt/opencl-clhpp/opencl-clhpp_git.bb b/meta-xilinx-bsp/recipes-xrt/opencl-clhpp/opencl-clhpp_git.bb deleted file mode 100644 index 9af4442d..00000000 --- a/meta-xilinx-bsp/recipes-xrt/opencl-clhpp/opencl-clhpp_git.bb +++ /dev/null @@ -1,29 +0,0 @@ -SUMMARY = "Host API C++ bindings" -DESCRIPTION = "OpenCL compute API headers C++ bindings from Khronos Group" -LICENSE = "Khronos" -LIC_FILES_CHKSUM = "file://LICENSE.txt;md5=7e4a01f0c56b39419aa287361a82df00" -SECTION = "base" - -SRC_URI = "git://github.com/KhronosGroup/OpenCL-CLHPP.git;protocol=https" - -PV = "2.0.10+git${SRCPV}" -SRCREV = "acd6972bc65845aa28bd9f670dec84cbf8b760f3" - -S = "${WORKDIR}/git" - -do_configure () { -: -} - -# Only cl2.hpp is necessary. -# Base on the repo, Directly input_cl2.hpp copied as cl2.hpp -do_compile () { -: -} - -do_install () { - install -d ${D}${includedir}/CL/ - install -m 0644 ${S}/input_cl2.hpp ${D}${includedir}/CL/cl2.hpp -} - -ALLOW_EMPTY_${PN} = "1" diff --git a/meta-xilinx-bsp/recipes-xrt/opencl-headers/opencl-headers_%.bbappend b/meta-xilinx-bsp/recipes-xrt/opencl-headers/opencl-headers_%.bbappend deleted file mode 100644 index afe3e9cd..00000000 --- a/meta-xilinx-bsp/recipes-xrt/opencl-headers/opencl-headers_%.bbappend +++ /dev/null @@ -1 +0,0 @@ -ALLOW_EMPTY_${PN} = "1" diff --git a/meta-xilinx-bsp/recipes-xrt/xrt/xrt_git.bb b/meta-xilinx-bsp/recipes-xrt/xrt/xrt_git.bb deleted file mode 100644 index 4bb41b7d..00000000 --- a/meta-xilinx-bsp/recipes-xrt/xrt/xrt_git.bb +++ /dev/null @@ -1,28 +0,0 @@ -SUMMARY = "Xilinx Runtime(XRT) libraries" -DESCRIPTION = "Xilinx Runtime User Space Libraries and headers" - -LICENSE = "GPLv2 & Apache-2.0" -LIC_FILES_CHKSUM = "file://${WORKDIR}/git/LICENSE;md5=fa343562af4b9b922b8d7fe7b0b6d000 \ - file://runtime_src/driver/xclng/drm/xocl/LICENSE;md5=b234ee4d69f5fce4486a80fdaf4a4263 \ - file://runtime_src/driver/xclng/xrt/user_gem/LICENSE;md5=3b83ef96387f14655fc854ddc3c6bd57 \ - file://runtime_src/driver/xclng/tools/xbutil/LICENSE;md5=d273d63619c9aeaf15cdaf76422c4f87" - -SRC_URI = "git://github.com/Xilinx/XRT.git;protocol=https;nobranch=1" - -PV = "2.2.0+git${SRCPV}" -SRCREV = "da87ac894a037d7e11c0496361458efed4bab438" - -S = "${WORKDIR}/git/src" - -inherit cmake - -BBCLASSEXTEND = "native nativesdk" - -# util-linux is for libuuid-dev. -DEPENDS = "libdrm opencl-headers ocl-icd opencl-clhpp boost util-linux git-replacement-native" -RDEPENDS_${PN} = "bash ocl-icd boost-system boost-filesystem" - -EXTRA_OECMAKE += " \ - -DCMAKE_BUILD_TYPE=Release \ - -DCMAKE_EXPORT_COMPILE_COMANDS=ON \ - " diff --git a/meta-xilinx-bsp/recipes-xrt/zocl/zocl_git.bb b/meta-xilinx-bsp/recipes-xrt/zocl/zocl_git.bb deleted file mode 100644 index b47f45fd..00000000 --- a/meta-xilinx-bsp/recipes-xrt/zocl/zocl_git.bb +++ /dev/null @@ -1,14 +0,0 @@ -SUMMARY = "Xilinx Runtime(XRT) driver module" -DESCRIPTION = "Xilinx Runtime driver module provides memory management and compute unit schedule" - -LICENSE = "GPLv2" -LIC_FILES_CHKSUM = "file://LICENSE;md5=b234ee4d69f5fce4486a80fdaf4a4263" - -SRC_URI = "git://github.com/Xilinx/XRT.git;protocol=https" - -PV = "2.2.0+git${SRCPV}" -SRCREV = "da87ac894a037d7e11c0496361458efed4bab438" - -S = "${WORKDIR}/git/src/runtime_src/driver/zynq/drm/zocl" - -inherit module |