diff options
Diffstat (limited to 'meta-xilinx-bsp/conf/machine/zc706-zynq7.conf')
| -rw-r--r-- | meta-xilinx-bsp/conf/machine/zc706-zynq7.conf | 91 |
1 files changed, 42 insertions, 49 deletions
diff --git a/meta-xilinx-bsp/conf/machine/zc706-zynq7.conf b/meta-xilinx-bsp/conf/machine/zc706-zynq7.conf index 741ef5de..7e0525d1 100644 --- a/meta-xilinx-bsp/conf/machine/zc706-zynq7.conf +++ b/meta-xilinx-bsp/conf/machine/zc706-zynq7.conf @@ -1,51 +1,44 @@ #@TYPE: Machine #@NAME: zc706-zynq7 -#@DESCRIPTION: Machine support for ZC706 Evaluation Board. -# -# For details on the Evaluation board: -# http://www.xilinx.com/products/boards-and-kits/EK-Z7-ZC706-G.htm -# For documentation and design files for the ZC702: -# http://www.xilinx.com/support/index.html/content/xilinx/en/supportNav/boards_and_kits/zynq-7000_soc_boards_and_kits/zynq-7000_soc_zc706_evaluation_kit.html -# For the FSBL 'zynq_fsbl_0.elf' refer to UG873 and the associated design files. -# - -SOC_VARIANT ?= "7z" - -require conf/machine/include/tune-zynq.inc -require conf/machine/include/machine-xilinx-overrides.inc -require conf/machine/include/machine-xilinx-default.inc -require conf/machine/include/machine-xilinx-qemu.inc - -MACHINE_FEATURES = "rtc ext2 ext3 vfat usbhost usbgadget" - -# u-boot configuration -UBOOT_MACHINE = "zynq_zc706_config" -SPL_BINARY ?= "spl/boot.bin" - -EXTRA_IMAGEDEPENDS += " \ - u-boot-zynq-uenv \ - virtual/boot-bin \ - virtual/bootloader \ - " - -SERIAL_CONSOLE = "115200 ttyPS0" - -KERNEL_DEVICETREE = "zynq-zc706.dtb" - -IMAGE_BOOT_FILES += " \ - boot.bin \ - uEnv.txt \ - " - -# Although not fully supported you can run this machine on the mainline QEMU 'xilinx-zynq-a9' machine -IMAGE_CLASSES += "qemuboot" -QB_MEM = "-m 1024" -QB_MACHINE = "-machine xilinx-zynq-a9" -QB_OPT_APPEND = "-nographic -serial null -serial mon:stdio" -QB_NETWORK_DEVICE = "-net nic,netdev=net0,macaddr=@MAC@" - -# Xilinx's fork of QEMU has much better results, so let's default to that -# Use qemu-xilinx instead of mainline -PREFERRED_PROVIDER_qemu-helper-native = "qemu-xilinx-helper-native" - -IMAGE_CLASSES += "qemuboot-xilinx" +#@DESCRIPTION: Machine configuration for the ZC706 evaluation boards. + +#### Preamble +MACHINEOVERRIDES =. "${@['', 'zc706-zynq7:']['zc706-zynq7' !='${MACHINE}']}" +#### Regular settings follow + +# Variables that changes based on hw design or board specific requirement must be +# defined before calling the required inclusion file else pre-expansion value +# defined in zynq-generic.conf will be set. + +# Yocto device-tree variables +YAML_CONSOLE_DEVICE_CONFIG:pn-device-tree ?= "ps7_uart_1" +YAML_MAIN_MEMORY_CONFIG:pn-device-tree ?= "PS7_DDR_0" +YAML_DT_BOARD_FLAGS ?= "{BOARD zc706}" + +# Yocto FSBL variables +YAML_SERIAL_CONSOLE_STDIN:pn-fsbl-firmware ?= "ps7_uart_1" +YAML_SERIAL_CONSOLE_STDOUT:pn-fsbl-firmware ?= "ps7_uart_1" + +# Yocto KERNEL Variables +UBOOT_ENTRYPOINT ?= "0x200000" +UBOOT_LOADADDRESS ?= "0x200000" + +# zc706-zynq7 Serial Console +SERIAL_CONSOLES ?= "115200;ttyPS0" +YAML_SERIAL_CONSOLE_BAUDRATE ?= "115200" + +# Required generic machine inclusion +require conf/machine/zynq-generic.conf + +# This eval board machine conf file uses zc702-zynq7 xsa as reference input. +# User can override with zc702 custom xsa using HDF_BASE and HDF_PATH variables +# from local.conf. +HDF_MACHINE = "zc706-zynq7" + +# KERNEL_DEVICETREE is disabled as we use board device tree from DTG to match +# the xsa. User can enable explicitly if required from local.conf. +# KERNEL_DEVICETREE = "zynq-zc706.dtb" + +#### No additional settings should be after the Postamble +#### Postamble +PACKAGE_EXTRA_ARCHS:append = "${@['', ' zc706_zynq7']['zc706-zynq7' != '${MACHINE}']}" |