Age | Commit message (Collapse) | Author |
|
* Create a recipe for the netmodule-zx3 kernel, this avoids issues with
the linux-xlnx recipes being overwritten with netmodule-zx3 source
trees
* Remove overrides on the linux-xlnx_3.14 recipe
* Move defconfigs for ze7000-zynq7 and zx3-pm3-zynq7 machines into a
kernel versioned sub directory
* Update ze7000-zynq7 and zx3-pm3-zynq7 machines confs to point to
linux-netmodule-zx3 as the default kernel provider
Signed-off-by: Nathan Rossi <nathan.rossi@xilinx.com>
Signed-off-by: Elvis Dowson <elvis.dowson@gmail.com>
|
|
* Move the defconfig for the TRD machines into the
linux-xlnx/${KERNEL_VERSION}/*/defconfig path
* Remove use of MACHINE_KCONFIG
* linux-xlnx kernel uses linux-yocto recipe for configuration and
automatically picks up defconfig files in the ${WORKDIR}
* Remove the defconfig from conf/machine/boards/common/linux/
Signed-off-by: Nathan Rossi <nathan.rossi@xilinx.com>
Signed-off-by: Elvis Dowson <elvis.dowson@gmail.com>
|
|
Add SDCard support for the Enclustra PM3 Evalboard
as board up from Rev D have this interface by
default.
Signed-off-by: David Andrey <david.andrey@netmodule.com>
Signed-off-by: Elvis Dowson <elvis.dowson@gmail.com>
|
|
Use own kernel repository during development instead
of a patch list.
Signed-off-by: David Andrey <david.andrey@netmodule.com>
Signed-off-by: Elvis Dowson <elvis.dowson@gmail.com>
|
|
Add initial support for Enclustra ZX3 and Mars PM3
combination.
Signed-off-by: David Andrey <david.andrey@netmodule.com>
Signed-off-by: Elvis Dowson <elvis.dowson@gmail.com>
|
|
Update the ze7000-zynq7 machine to kernel 3.14
Signed-off-by: David Andrey <david.andrey@netmodule.com>
Signed-off-by: Guy Morand <guy.morand@netmodule.com>
Signed-off-by: Elvis Dowson <elvis.dowson@gmail.com>
|
|
Signed-off-by: Elvis Dowson <elvis.dowson@gmail.com>
|
|
Signed-off-by: Elvis Dowson <elvis.dowson@gmail.com>
|
|
Add mmc support to the ze7000 device.
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@netmodule.com>
|
|
ERROR: ExpansionError during parsing /home/eichenberger/projects/ze7000/poky/meta-xilinx/recipes-kernel/linux/linux-xlnx_3.8.bb: Failure expanding variable do_fetch[file-checksums], expression was ${@bb.fetch.get_checksum_file_list(d)} which triggered exception MalformedUrl: The URL: '${PATCH_LIST_ze7000-zynq7}' is invalid and cannot be interpreted
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@netmodule.com>
|
|
This commit resolves the following error:
ERROR: ExpansionError during parsing /tool/yocto/meta-xilinx/recipes-kernel/
linux/linux-xlnx_3.8.bb: Failure expanding variable do_fetch[file-checksums],
expression was ${@bb.fetch.get_checksum_file_list(d)} which triggered
exception MalformedUrl: The URL: '${PATCH_LIST}' is invalid and cannot be
interpreted.
Signed-off-by: Elvis Dowson <elvis.dowson@gmail.com>
|
|
Remove two debug messages during parsing.
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@netmodule.com>
|
|
This commit:
- refactors the machine name from zynq-ze7000 to ze7000-zynq7.
Signed-off-by: Elvis Dowson <elvis.dowson@gmail.com>
|
|
Add a machine configuration for the ze7000 development platform (NetModule) based on the zx3 system on module (Enclustra).
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@netmodule.com>
|
|
the ZC706 PCIe Base TRD v14.7 z7_pcie-trd.bit file.
This commit:
- adds a zc706-zynq7-pcie-trd.dts devicetree file to support graphical boot
using the Xylon FB, using the z7_pcie_trd.bit file from ZC706 PCIe TRD 14.7.
You must create a BOOT.bin file by taking the zynq_fsbl.elf and
z7_pcie_trd.bit from the ZC706 PCIe TRD 14.7 pre-built images, and use the
u-boot.elf from a yocto build.
Signed-off-by: Elvis Dowson <elvis.dowson@gmail.com>
|
|
This commit:
- refactors the ZC702 Base TRD devicetree to layer on top of the meta-xilinx
zynq-7-base.dtsi and zc702-zynq7-board.dtsi files. This devicetree file
is based on the zynq-zc702-base-trd.dts file from linux-xlnx
xilinx-v2013.4-trd tag.
Signed-off-by: Elvis Dowson <elvis.dowson@gmail.com>
|
|
using Xylon FB using the Zynq Base TRD 14.5 BOOT.bin file.
This commit:
- adds a xilinx_zynq_base_trd_defconfig_3.10.cfg kernel config file
- adds a zynq-zc702-base-trd.dts devicetree file
to support graphical boot using the Xylon FB, using the BOOT.bin
file from Zynq Base TRD 14.5 (2013.1). These files were taken from
linux-xlnx commit efc27505715e64526653f35274717c0fc56491e3.
The Zynq Base TRD 14.5 (2013.1) can be downloaded from
http://www.wiki.xilinx.com/Zynq+Base+TRD+14.5
Signed-off-by: Elvis Dowson <elvis.dowson@gmail.com>
|
|
This commit:
- deletes all core, kernel and bsp recipes to prepare for layering on top
of the offical meta-xilinx layer.
Signed-off-by: Elvis Dowson <elvis.dowson@gmail.com>
|
|
Signed-off-by: Elvis Dowson <elvis.dowson@gmail.com>
|
|
This commit
- updates the recipe to the xilinx-v14.4 tag with commit id
04d9378881401e71f83b8b4fea0abd71d33b4052
(from git://git.xilinx.com/linux-xlnx.git)
- adds support for HDMI output using the Xylon FrameBuffer, as described in
the Zynq Base TRD 14.4
(see http://www.wiki.xilinx.com/Zynq+Base+TRD+14.4)
- updates the defconfig file using zynq_base_trd_defconfig file from
the Zynq Base TRD 14.4
- adds a zynq-7-ac702-hdmi-xylon-hdmi.dts file, which is a copy of the
zynq_base_trd.dts file from the Zynq Base TRD 14.4
Signed-off-by: Elvis Dowson <elvis.dowson@gmail.com>
|
|
machine configurations.
This commit:
- adds summary and description for the linux-xilinx-3.3 recipe
- updates the linux-xilinx_3.3 recipe to use SRCREV
- removes un-supported machine configurations virtex5mb, spartan6-sp605 and
spartan6-lx9mb
Signed-off-by: Elvis Dowson <elvis.dowson@gmail.com>
|
|
This commit
- removes the xilinx-default-revisions.inc file so that you can specify
commit ids using SRCREV instead of SRCREV_pn-${PN}, in u-boot and linux
recipes.
- removes the reference to xilinx-default-versions.inc from conf/layer.conf
- updates u-boot-xilinx_2012.10 recipe to use SRCREV
- updates u-boot-xilinx_git recipe to use SRCREV
- updates linux-xilinx_3.6 recipe to use SRCREV
Signed-off-by: Elvis Dowson <elvis.dowson@gmail.com>
|
|
c0265c7446eeedb19faae79ca1806952fe360f50
This commit updates the linux-xilinx_git.bb recipe for the Xilinx
Zynq-7 SOC, to be based on the master-next branch of the linux-xlnx.git
repository, for bleeding edge support.
This recipe has been temporarily disabled, pending updates to support
additional Xilinx -5, -6 and -7 series FPGAs.
http://git.xilinx.com/?p=linux-xlnx.git;a=commit;h=c0265c7446eeedb19faae79ca1806952fe360f50
Signed-off-by: Elvis Dowson <elvis.dowson@gmail.com>
|
|
This commit adds initial support for linux-xilinx-3.6.0 for the Xilinx
Zynq-7 SOC, based on the master branch of the linux-xlnx.git repository.
http://git.xilinx.com/?p=linux-xlnx.git;a=commit;h=04d9378881401e71f83b8b4fea0abd71d33b4052
Signed-off-by: Elvis Dowson <elvis.dowson@gmail.com>
|
|
FILESPATH, SRCREC, KBRANCH and PR variables.
Signed-off-by: Elvis Dowson <elvis.dowson@gmail.com>
|
|
FPU.
This commit
- adds a patch to update the virtex440-ml507.dts to support bistreams
containing an APU FPU on the PL side
- adds the corresponding changes to the kernel defconfig file to enable the
Xilinx Soft FPU by setting CONFIG_PPC_FPU=y
Signed-off-by: Elvis Dowson <elvis.dowson@gmail.com>
|
|
This commit refactors the linux-xilinx git recipe to use the virtex-5
SOC_FAMILY definition.
Signed-off-by: Elvis Dowson <elvis.dowson@gmail.com>
|
|
This commit refactors the linux-xilinx-3.3 recipe to use the virtex-5
SOC_FAMILY definition.
Signed-off-by: Elvis Dowson <elvis.dowson@gmail.com>
|
|
This commit adds a new recipe for the linux-xilinx v3.3.0 kernel, and
includes the following features:
* support for Xilinx ML507 development board
* support for Xilinx Virtex 5 PowerPC440 processor
* support for console output on a LCD display using the DVI port
* support for using a ramdisk and booting to a bash prompt
* support for xps-uart16550-2.00.a, ttyS0
* support for xps-ethernetlite-4.00.a, 10/100 Mbps ethernet interface
The ramdisk size has been set to 32768 kilobytes. This value can be
changed by modifying the supplied kernel deconfig file.
The linux-xilinx v3.3.0 kernel has been tested using a hardware project
created using Xilinx EDK 14.2.
Signed-off-by: Elvis Dowson <elvis.dowson@gmail.com>
|
|
* Update xilinx linux kernel to v3.3.0.
* Update recipe to use SRCREV_pn-${PN} to set the commit id.
* Refactor recipe and move common definitions to linux-xilinx.inc
* Bump PR.
Signed-off-by: Elvis Dowson <elvis.dowson@gmail.com>
Acked-by: Adrian Alonso <aalonso00@gmail.com>
|
|
* This commits corrects the license for the linux-xilinx
recipe to GPLv2.
* Update the SRC_URI to git://git.xilinx.com/linux-xlnx.git
to match the project name on the Xilinx git repository.
* Bump PR
Signed-off-by: Elvis Dowson <elvis.dowson@gmail.com>
Acked-by: Adrian Alonso <aalonso00@gmail.com>
|
|
* Add Linux version and set PV variable
* Bump PR
Signed-off-by: Adrian Alonso <aalonso00@gmail.com>
|
|
* Override XILINX_BOARD if previously defined
Useful on microblaze target where we can't easy
find out on which board microblaze is used.
* Bump PR
Signed-off-by: Adrian Alonso <aalonso00@gmail.com>
|
|
* Remove uneeded patchs, fixed errors with newer gcc
kbuild-Fix-passing-Wno-options-to-gcc-4.4.patch
linux-xilinx-do-not-use-OS-option.patch
* Bump PR
Signed-off-by: Adrian Alonso <aalonso00@gmail.com>
|
|
* New kernel config for virtex5mb target board
Signed-off-by: Adrian Alonso <aalonso@secretlab.ca>
|
|
* New kernel config for spartan6-sp605 target board
Signed-off-by: Adrian Alonso <aalonso@secretlab.ca>
|
|
* Update compatible machine definitions
* Set kernel device tree for microblazeel target
* Bump PR
Signed-off-by: Adrian Alonso <aalonso@secretlab.ca>
|
|
* Remove custom layer linux.inc file, core functionality
intergrated in kernel.bbclass.
* Bump PR
Signed-off-by: Adrian Alonso <aalonso@secretlab.ca>
|
|
* kbuild-Fix-passing-Wno-options-to-gcc-4.4.patch:
* From kernel mailing list
http://permalink.gmane.org/gmane.linux.kernel.next/16754
Starting with 4.4, gcc will happily accept -Wno-≤anything> in the
cc-option test and complain later when compiling a file that has some
other warning. This rather unexpected behavior is intentional as per
http://gcc.gnu.org/PR28322, so work around it by testing for support of
the opposite option (without the no-). Introduce a new Makefile function
cc-disable-warning that does this and update two uses of cc-option in
the toplevel Makefile.
* Add Makefile option to disable warnings from unused-but-set-variable
* linux-xilinx_git:
* Include previous patch to SRC_URI
* Increment PR
Signed-off-by: Adrian Alonso <aalonso@secretlab.ca>
|
|
* Remove SRCREV predefined version in order to use
AUTOREV from xilinx-preferred-versions file
* Minor cleanups
* Bump PR
Signed-off-by: Adrian Alonso <aalonso@secretlab.ca>
|
|
* Kernel config for spartan6-lx9mb target board
* New file
Signed-off-by: Adrian Alonso <aalonso@secretlab.ca>
|
|
* Add spartan6-lx9mb target board to compatible list
* Remove DEFAULT_PREFERENCE settings since compatibility is determined
by previous setting
* Bumb PR
Signed-off-by: Adrian Alonso <aalonso@secretlab.ca>
|
|
* Use deveice_tree helper function for setting
target dts source file instead of hardcodded value
* Use xilinx-utils for identify the target board model
find_board functions inspects the xilinx hardware project
to find out the model board used.
* Bump PR
Signed-off-by: Adrian Alonso <aalonso@secretlab.ca>
|
|
* Fix dtb include path
* Remove unused settings
Signed-off-by: Adrian Alonso <aalonso@secretlab.ca>
|
|
* Sync kernel version to 2.6.37 from xilinx repo
* Add linux.inc to meta-xilinx layer (deprecated in main layer).
* Increase PR
Signed-off-by: Adrian Alonso <aalonso@secretlab.ca>
|
|
* Update defconfig for linux 2.6.37 rc4
* Enable xilinx spi driver
Signed-off-by: Adrian Alonso <aalonso@secretlab.ca>
|
|
* Update defconfig for linux 2.6.37 rc4
* Enable xilinx spi driver
Signed-off-by: Adrian Alonso <aalonso@secretlab.ca>
|
|
* Add LICENSE_FILES_CHKSUM information
* Bump PR
Signed-off-by: Adrian Alonso <aalonso@secretlab.ca>
|
|
* Remove hardcodded include path
* Fix inherit xilinx-kernel for sw/hw integration
* Remove configure prepend function, use default config
mechanism
* Bump PR
Signed-off-by: Adrian Alonso <aalonso@secretlab.ca>
|
|
* Update kernel version 2.6.37 rc4
* Remove xilinx frame buffer patch, integrated in 2.6.36
* Bump PR
Signed-off-by: Adrian Alonso <aalonso@secretlab.ca>
|