1 files changed, 0 insertions, 51 deletions
diff --git a/recipes-kernel/linux/linux-xlnx/zx3-zynq7/0002-zx3-phy-adapt-marvell-settings.patch b/recipes-kernel/linux/linux-xlnx/zx3-zynq7/0002-zx3-phy-adapt-marvell-settings.patch
deleted file mode 100644
index 3349f5c..0000000
--- a/recipes-kernel/linux/linux-xlnx/zx3-zynq7/0002-zx3-phy-adapt-marvell-settings.patch
+++ /dev/null
@@ -1,51 +0,0 @@
-From b266e1a7ff8073d0437fcafc51ba5f97bf523fc5 Mon Sep 17 00:00:00 2001
-From: David Andrey <david.andrey@netmodule.com>
-Date: Fri, 27 Jun 2014 11:39:31 +0200
-Subject: [PATCH 2/7] zx3: phy: adapt marvell settings
-
-The onboard PHY is compatible with the 88E1116R,
-based on the UID at least
-Marvell settings are overwritten to met the board
-requirements
-
-Signed-off-by: David Andrey <david.andrey@netmodule.com>
----
- drivers/net/phy/marvell.c |   19 ++++++++++++++++++-
- 1 file changed, 18 insertions(+), 1 deletion(-)
-
-diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
-index bd37e45..d36686a 100644
---- a/drivers/net/phy/marvell.c
-+++ b/drivers/net/phy/marvell.c
-@@ -414,11 +414,28 @@ static int m88e1116r_config_init(struct phy_device *phydev)
-	if (err < 0)
-		return err;
-	temp = phy_read(phydev, MII_M1116R_CONTROL_REG_MAC);
--	temp |= (1 << 5);
-+	temp &= ~(1 << 5);  /* @@ NetModule, da, set correct mode for ZE7000 board */
-	temp |= (1 << 4);
-	err = phy_write(phydev, MII_M1116R_CONTROL_REG_MAC, temp);
-	if (err < 0)
-		return err;
-+
-+	/* @@ NetModule, da, LED settings */
-+	err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 3);
-+	if (err < 0)
-+		return err;
-+
-+	temp = 0x1040;
-+	err = phy_write(phydev, 16, temp);
-+	if (err < 0)
-+		return err;
-+
-+	temp = 0x4405;
-+	err = phy_write(phydev, 17, temp);
-+	if (err < 0)
-+		return err;
-+
-+
-	err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0);
-	if (err < 0)
-		return err;
---
-1.7.10.4