aboutsummaryrefslogtreecommitdiffstats
path: root/common/recipes-core/initrdscripts/files/intel-x86-common/init-install-efi.sh
diff options
context:
space:
mode:
Diffstat (limited to 'common/recipes-core/initrdscripts/files/intel-x86-common/init-install-efi.sh')
-rw-r--r--common/recipes-core/initrdscripts/files/intel-x86-common/init-install-efi.sh342
1 files changed, 0 insertions, 342 deletions
diff --git a/common/recipes-core/initrdscripts/files/intel-x86-common/init-install-efi.sh b/common/recipes-core/initrdscripts/files/intel-x86-common/init-install-efi.sh
deleted file mode 100644
index a7a2ad4c..00000000
--- a/common/recipes-core/initrdscripts/files/intel-x86-common/init-install-efi.sh
+++ /dev/null
@@ -1,342 +0,0 @@
-#!/bin/sh -e
-#
-# Copyright (c) 2016, Intel Corporation.
-# All rights reserved.
-#
-# install.sh [device_name] [rootfs_name]
-#
-# This file is a copy of file with same name in OE:
-# meta/recipes-core/initrdscripts/files/. We modify
-# it for RMC feature to deploy file blobs from RMC
-# database file to target.
-
-PATH=/sbin:/bin:/usr/sbin:/usr/bin
-
-# We need 20 Mb for the boot partition
-boot_size=20
-
-# 5% for swap
-swap_ratio=5
-
-# Get a list of hard drives
-hdnamelist=""
-live_dev_name=`cat /proc/mounts | grep ${1%/} | awk '{print $1}'`
-live_dev_name=${live_dev_name#\/dev/}
-# Only strip the digit identifier if the device is not an mmc
-case $live_dev_name in
- mmcblk*)
- ;;
- nvme*)
- ;;
- *)
- live_dev_name=${live_dev_name%%[0-9]*}
- ;;
-esac
-
-echo "Searching for hard drives ..."
-
-for device in `ls /sys/block/`; do
- case $device in
- loop*)
- # skip loop device
- ;;
- sr*)
- # skip CDROM device
- ;;
- ram*)
- # skip ram device
- ;;
- *)
- # skip the device LiveOS is on
- # Add valid hard drive name to the list
- case $device in
- $live_dev_name*)
- # skip the device we are running from
- ;;
- *)
- hdnamelist="$hdnamelist $device"
- ;;
- esac
- ;;
- esac
-done
-
-if [ -z "${hdnamelist}" ]; then
- echo "You need another device (besides the live device /dev/${live_dev_name}) to install the image. Installation aborted."
- exit 1
-fi
-
-TARGET_DEVICE_NAME=""
-for hdname in $hdnamelist; do
- # Display found hard drives and their basic info
- echo "-------------------------------"
- echo /dev/$hdname
- if [ -r /sys/block/$hdname/device/vendor ]; then
- echo -n "VENDOR="
- cat /sys/block/$hdname/device/vendor
- fi
- if [ -r /sys/block/$hdname/device/model ]; then
- echo -n "MODEL="
- cat /sys/block/$hdname/device/model
- fi
- if [ -r /sys/block/$hdname/device/uevent ]; then
- echo -n "UEVENT="
- cat /sys/block/$hdname/device/uevent
- fi
- echo
-done
-
-# Get user choice
-while true; do
- echo "Please select an install target or press n to exit ($hdnamelist ): "
- read answer
- if [ "$answer" = "n" ]; then
- echo "Installation manually aborted."
- exit 1
- fi
- for hdname in $hdnamelist; do
- if [ "$answer" = "$hdname" ]; then
- TARGET_DEVICE_NAME=$answer
- break
- fi
- done
- if [ -n "$TARGET_DEVICE_NAME" ]; then
- break
- fi
-done
-
-if [ -n "$TARGET_DEVICE_NAME" ]; then
- echo "Installing image on /dev/$TARGET_DEVICE_NAME ..."
-else
- echo "No hard drive selected. Installation aborted."
- exit 1
-fi
-
-device=/dev/$TARGET_DEVICE_NAME
-
-#
-# The udev automounter can cause pain here, kill it
-#
-rm -f /etc/udev/rules.d/automount.rules
-rm -f /etc/udev/scripts/mount*
-
-#
-# Unmount anything the automounter had mounted
-#
-umount ${device}* 2> /dev/null || /bin/true
-
-mkdir -p /tmp
-
-# Create /etc/mtab if not present
-if [ ! -e /etc/mtab ]; then
- cat /proc/mounts > /etc/mtab
-fi
-
-disk_size=$(parted ${device} unit mb print | grep '^Disk .*: .*MB' | cut -d" " -f 3 | sed -e "s/MB//")
-
-swap_size=$((disk_size*swap_ratio/100))
-rootfs_size=$((disk_size-boot_size-swap_size))
-
-rootfs_start=$((boot_size))
-rootfs_end=$((rootfs_start+rootfs_size))
-swap_start=$((rootfs_end))
-
-# MMC devices are special in a couple of ways
-# 1) they use a partition prefix character 'p'
-# 2) they are detected asynchronously (need rootwait)
-rootwait=""
-part_prefix=""
-if [ ! "${device#/dev/mmcblk}" = "${device}" ] || \
-[ ! "${device#/dev/nvme}" = "${device}" ]; then
- part_prefix="p"
- rootwait="rootwait"
-fi
-bootfs=${device}${part_prefix}1
-rootfs=${device}${part_prefix}2
-swap=${device}${part_prefix}3
-
-echo "*****************"
-echo "Boot partition size: $boot_size MB ($bootfs)"
-echo "Rootfs partition size: $rootfs_size MB ($rootfs)"
-echo "Swap partition size: $swap_size MB ($swap)"
-echo "*****************"
-echo "Deleting partition table on ${device} ..."
-dd if=/dev/zero of=${device} bs=512 count=35
-
-echo "Creating new partition table on ${device} ..."
-parted ${device} mklabel gpt
-
-echo "Creating boot partition on $bootfs"
-parted ${device} mkpart boot fat32 0% $boot_size
-parted ${device} set 1 boot on
-
-echo "Creating rootfs partition on $rootfs"
-parted ${device} mkpart root ext3 $rootfs_start $rootfs_end
-
-echo "Creating swap partition on $swap"
-parted ${device} mkpart swap linux-swap $swap_start 100%
-
-parted ${device} print
-
-echo "Formatting $bootfs to vfat..."
-mkfs.vfat $bootfs
-
-echo "Formatting $rootfs to ext3..."
-mkfs.ext3 $rootfs
-
-echo "Formatting swap partition...($swap)"
-mkswap $swap
-
-mkdir /tgt_root
-mkdir /src_root
-mkdir -p /boot
-
-# Handling of the target root partition
-mount $rootfs /tgt_root
-mount -o rw,loop,noatime,nodiratime /run/media/$1/$2 /src_root
-echo "Copying rootfs files..."
-cp -a /src_root/* /tgt_root
-if [ -d /tgt_root/etc/ ] ; then
- boot_uuid=$(blkid -o value -s UUID ${bootfs})
- swap_part_uuid=$(blkid -o value -s PARTUUID ${swap})
- echo "/dev/disk/by-partuuid/$swap_part_uuid swap swap defaults 0 0" >> /tgt_root/etc/fstab
- echo "UUID=$boot_uuid /boot vfat defaults 1 2" >> /tgt_root/etc/fstab
- # We dont want udev to mount our root device while we're booting...
- if [ -d /tgt_root/etc/udev/ ] ; then
- echo "${device}" >> /tgt_root/etc/udev/mount.blacklist
- fi
-fi
-
-# Handling of the target boot partition
-mount $bootfs /boot
-echo "Preparing boot partition..."
-
-EFIDIR="/boot/EFI/BOOT"
-mkdir -p $EFIDIR
-# Copy the efi loader
-cp /run/media/$1/EFI/BOOT/*.efi $EFIDIR
-
-# RMC deployment
-RMC_CMD=/src_root/usr/bin/rmc
-RMC_DB=/run/media/$1/rmc.db
-
-# We don't want to quit when a step failed. For example,
-# a file system could not support some operations.
-set +e
-
-if [ -f "${RMC_DB}" ] && [ -f "${RMC_CMD}" ]; then
- echo "Found RMC database and tool, start RMC deployment"
- # query INSTALLER.CONFIG from RMC DB
- if ${RMC_CMD} -B INSTALLER.CONFIG -d "${RMC_DB}" -o /tmp/installer.config; then
- while IFS=':' read -r NAME TGT_UID TGT_GID TGT_MODE TGT_PATH; do
- # skip comment
- # The regexp in grep works with busybox grep which doesn't
- # seem to have a -P to recognize '\t'. But this expression could not
- # work with gnu grep...
- if echo "$NAME"|grep -q $'^[ \t]*#'; then
- continue
- fi
- # check if we should create a directory (last char in target path is '/')
- # or deploy a file
- LAST_CHAR=$(echo "${TGT_PATH:$((${#TGT_PATH}-1)):1}")
-
- # Do not bail out for failures but user should get stderr message
- if [ ${LAST_CHAR} = "/" ]; then
- # name field is skipped for directory
- echo "DIR: ${TGT_UID}:${TGT_GID}:${TGT_MODE} => ${TGT_PATH}"
- mkdir -p "$TGT_PATH"
- chown "${TGT_UID}:${TGT_GID}" "$TGT_PATH"
- chmod "${TGT_MODE}" "$TGT_PATH"
- else
- ${RMC_CMD} -B "${NAME}" -d "${RMC_DB}" -o "${TGT_PATH}"
- echo "FILE: ${NAME}:${TGT_UID}:${TGT_GID}:${TGT_MODE} => ${TGT_PATH}"
- chown "${TGT_UID}:${TGT_GID}" "$TGT_PATH"
- chmod "${TGT_MODE}" "$TGT_PATH"
- fi
- done < /tmp/installer.config
- rm -rf /tmp/installer.config
-
- # remove rmc from target since we don't think it is a valid
- # case to run rmc after installation.
- rm -rf /tgt_root/usr/bin/rmc
- echo "RMC deployment finished"
- else
- echo "INSTALLER.CONFIG is not found, skip RMC deployment"
- fi
-
- # Final retouching by calling post-install hook
- if ${RMC_CMD} -B POSTINSTALL.sh -d "${RMC_DB}" -o /tmp/POSTINSTALL.sh; then
- echo "Found POSTINSTALL.sh execute it..."
- chmod 500 /tmp/POSTINSTALL.sh
- /tmp/POSTINSTALL.sh
- rm -rf /tmp/POSTINSTALL.sh
- fi
-fi
-set -e
-
-if [ -f /run/media/$1/EFI/BOOT/grub.cfg ]; then
- root_part_uuid=$(blkid -o value -s PARTUUID ${rootfs})
- GRUBCFG="$EFIDIR/grub.cfg"
- cp /run/media/$1/EFI/BOOT/grub.cfg $GRUBCFG
- # Update grub config for the installed image
- # Delete the install entry
- sed -i "/menuentry 'install'/,/^}/d" $GRUBCFG
- # Delete the initrd lines
- sed -i "/initrd /d" $GRUBCFG
- # Delete any LABEL= strings
- sed -i "s/ LABEL=[^ ]*/ /" $GRUBCFG
- # Delete any root= strings
- sed -i "s/ root=[^ ]*/ /g" $GRUBCFG
- # Add the root= and other standard boot options
- sed -i "s@linux /vmlinuz *@linux /vmlinuz root=PARTUUID=$root_part_uuid rw $rootwait quiet @" $GRUBCFG
-fi
-
-if [ -d /run/media/$1/loader ]; then
- rootuuid=$(blkid -o value -s PARTUUID ${rootfs})
- GUMMIBOOT_CFGS="/boot/loader/entries/*.conf"
- if [ -d /boot/loader ]; then
- # Don't override loader.conf RMC already deployed
- if [ ! -f /boot/loader/loader.conf ]; then
- cp /run/media/$1/loader/loader.conf /boot/loader/
- fi
- # only copy built OE entries when RMC entries don't exist.
- if [ ! -d /boot/loader/entries ] || [ ! ls /boot/loader/entries/*.conf &>/dev/null ]; then
- cp -dr /run/media/$1/loader/entries /boot/loader
- fi
- else
- # copy config files for gummiboot
- cp -dr /run/media/$1/loader /boot
- # delete the install entry
- rm -f /boot/loader/entries/install.conf
- fi
- # delete the initrd lines
- sed -i "/initrd /d" $GUMMIBOOT_CFGS
- # delete any LABEL= strings
- sed -i "s/ LABEL=[^ ]*/ /" $GUMMIBOOT_CFGS
- # delete any root= strings
- sed -i "s/ root=[^ ]*/ /" $GUMMIBOOT_CFGS
- # add the root= and other standard boot options
- sed -i "s@options *@options root=PARTUUID=$rootuuid rw $rootwait quiet @" $GUMMIBOOT_CFGS
- # if RMC feature presents, append global kernel command line fragment when it exists.
- if [ -f "${RMC_DB}" ] && [ -f "${RMC_CMD}" ]; then
- if ${RMC_CMD} -B KBOOTPARAM -d "${RMC_DB}" -o /tmp/kbootparam; then
- sed -i "/^[ \t]*options/ s/$/ $(cat /tmp/kbootparam)/" $GUMMIBOOT_CFGS
- rm /tmp/kbootparam
- fi
- fi
-fi
-
-cp /run/media/$1/vmlinuz /boot
-
-umount /src_root
-umount /tgt_root
-umount /boot
-
-sync
-
-echo "Remove your installation media, and press ENTER"
-
-read enter
-
-echo "Rebooting..."
-reboot -f