Age | Commit message (Collapse) | Author |
|
Update u-boot recipe to be on the latest official upstream tag.
This introduces initial support for AM64x which works with v5.13
kernel tag.
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
|
|
Update linux firmware repo to 08.00.00.002
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
|
|
Update to 08.00.00.002 release tag
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
|
|
Commit 02a2433c ("ti-sci-fw: Update image gen to latest") switched to a
newer commit in k3-image-gen that also picked up TISCI firmware release,
However, does include a change where the SPL address changed.
This switch in address has been queued for upstream in a future release
(v5.14 + u-boot 2021.10) and current mainline formal tags do not support
this address change. As a result, we have a broken AM64x mainline
support.
Revert this specific change from k3-image-gen for mainline alone for
now.
NOTE: This uses ARAGO_BRAND=mainline which is NOT accurate for meta-ti
which is distro independent, hence without appropriate changes while
using alternate distros, this change will not take effect.
Reported-by: Tom Rini <trini@konsulko.com>
Suggested-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
|
|
Just updating imggen to a configuration compatible with latest firmware
should not have been accepted, we should have ensured that firmware
commit has moved correspondingly as well. Fix the same, else we get a
broken system.
Fixes: 406f5998227e ("ti-sci-fw: Update imggen to release 08.00.00.001 tag")
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Praneeth Bajjuri <praneeth@ti.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
|
|
Update the Prueth Dual Emac firmware to 5.6.15 version
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
|
|
Update prueth switch firmwares to 3.2.9 version
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
|
|
Update imggen for release 08.00.00.001 tag
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
|
|
Jailhouse support is dropped for K3 platforms. So the ivshmem
(inter VM shared memory) based UIO driver and test applications
cannot be build and are not required.
Remove the recipes for the same.
Signed-off-by: Nikhil Devshatwar <nikhil.nd@ti.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
|
|
Update AM65x SR2.0 prueth firmware to 02.02.09.02
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
|
|
Directly take the images from ti-linux-firmware instead of using pdk build,
due to inconsistency of PDK releases vs Linux SDK releases vs different
SoCs.
Update to FW version: REL.CORESDK.08.00.00.20
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
|
|
Update to v2.5 tag merge from upstream to keep TF-A in sync.
For major changes in trusted-firmware-a, See:
https://trustedfirmware-a.readthedocs.io/en/latest/change-log.html#version-2-5
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
|
|
Add prebuilt PRU Ethernet FW for am64xx-evm which is the same as
for AM65x SR2.0.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
|
|
With U-Boot supporting both am64xx-evm and am64xx-sk with single
defconfig, there is not need for a new machine for am64xx-sk.
So, drop support for am64xx-sk machine.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
|
Update to the latest commit of ti-u-boot-2021.01
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
|
|
Update to the latest commit of ti-u-boot-2021.01
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
|
|
Signed-off-by: Gowtham Tammana <g-tammana@ti.com>
|
|
Update u-boot recipe to be on the bleeding upstream tag.
While at it, also update the u-boot source url to point to the new
server as per [1].
While it may be redundant, lets document the usage of URI and
PROTOCOL for those, who (cough), may get tripped otherwise.
[1] https://source.denx.de/u-boot/u-boot/-/commit/a3bbd0b912f9afff745247fe9641961875322926
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
|
|
Update to the latest commit of ti-u-boot-2021.01
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
|
|
update image gen and linux-firmware projects to latest commit
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
|
|
Update branch and srcrev for picking up 5.10 branch.
Signed-off-by: Gowtham Tammana <g-tammana@ti.com>
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
|
|
Update to the latest commit of ti-u-boot-2021.01
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
|
|
The update brings the fix for 5.10.x linux kernel.
commit c0039f1fec25 ("cmemk: Fix 5.10 build errors for non Keystone2 platforms")
commit 8aba20e20bf7 ("cmemk: Fix build errors for 5.10+ kernels")
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Reviewed-by: Suman Anna <s-anna@ti.com>
|
|
This update contains build fix for linux kernel 5.10
* uio-module-drv: Replace ioremap_nocache with ioremap
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Reviewed-by: Gowtham Tammana <g-tammana@ti.com>
|
|
bump SRCREV to latest to pick build fix for 5.10 kernel.
this update picks
commit 816485e68430 ("Merge pull request #1 in DBG/dsptop from for-5.10 to master")
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Reviewed-by: Suman Anna <s-anna@ti.com>
|
|
update image get to latest
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
|
|
Update to the latest commit of ti-u-boot-2021.01
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
|
|
This reverts commit a0e26c1caf7d36953bd41f6a763101f5a65919e2.
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
|
|
Update the srcrev to pick the k5.10 development branch sources.
Signed-off-by: Gowtham Tammana <g-tammana@ti.com>
|
|
The additional patch for ti-sgx-ddk-km remaps the arm-oe-linux-gnueabi prefix
to the arm-linux-gnueabihf preferred target. Same should be done for the
arm-poky-linux-gnueabi prefix.
Signed-off-by: Zan Dobersek <zan@falconsigh.net>
Reviewed-by: Gowtham Tammana <g-tammana@ti.com>
|
|
Signed-off-by: Gowtham Tammana <g-tammana@ti.com>
|
|
It appears common-csl-ip-rtos does not require ti-sysbios dependency to build,
but ti-pdk.bbclass adds it by default. While most of PDK-based components do
require ti-sysbios to be built from sources, it is safe to remove it from CSL,
reducing the dependency tree for special cases like PRU FW based on CSL, but
not needing ti-sysbios.
This only affects firmwares built from sources against PDK and CSL, not when
RTOS firmwares are delivered in binary form for newer K3 platforms.
Build-tested on am335x, am57xx, k2g and am65xx.
Signed-off-by: Denys Dmytriyenko <denis@denix.org>
|
|
Fixes:
ERROR: cuia-1.0.0.13-r0 do_package: QA Issue: cuia: Files/directories were installed but not shipped in any package:
/usr/lib/gnu.targets.arm.rtsv5T.av5T
/usr/lib/syscalls.am3g
/usr/lib/gnu.targets.codesourcery.rtsv5T.a470MV
/usr/lib/syscalls.am4g
/usr/lib/gnu.targets.codesourcery.rtsv6.av6
/usr/lib/gnu.targets.arm.rtsv7A.av7A
/usr/lib/syscalls.am4fg
/usr/lib/gnu.targets.arm.rtsv7M.am4fg
/usr/lib/gnu.targets.arm.rtsv7M.am4g
/usr/lib/boot.am3g
/usr/lib/gnu.targets.arm.rtsv7M.am3g
/usr/lib/gnu.targets.arm.rtsv6.av6
/usr/lib/boot.am4fg
/usr/lib/boot.am4g
Please set FILES such that these items are packaged. Alternatively if they are unneeded, avoid installing them or delete them within do_install.
cuia: 14 installed and not shipped files. [installed-vs-shipped]
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
|
|
Resolves:
QA Issue: File /usr/lib/libedma3rm.so.1.0.0 in package edma3-lld doesn't have GNU_HASH (didn't pass LDFLAGS?)
QA Issue: File /usr/lib/libedma3.so.1.0.0 in package edma3-lld doesn't have GNU_HASH (didn't pass LDFLAGS?) [ldflags]
QA Issue: File /usr/bin/edma3_drv_c66ak2e_a15_sample_a15host_release.xa15fg in package edma3-lld-test doesn't have GNU_HASH (didn't pass LDFLAGS?)
QA Issue: File /usr/bin/edma3_drv_6638k2k_a15_sample_a15host_release.xa15fg in package edma3-lld-test doesn't have GNU_HASH (didn't pass LDFLAGS?)
QA Issue: File /usr/bin/edma3_drv_6636k2h_a15_sample_a15host_release.xa15fg in package edma3-lld-test doesn't have GNU_HASH (didn't pass LDFLAGS?)
QA Issue: File /usr/bin/edma3_drv_6630k2l_a15_sample_a15host_release.xa15fg in package edma3-lld-test doesn't have GNU_HASH (didn't pass LDFLAGS?) [ldflags]
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
|
|
It is a pre-built binary, hence no control over passing correct LDFLAGS.
This used to be a warning and recently became an error. Fixes:
ERROR: vis-01.50.07.15-r1 do_package_qa: QA Issue: File /usr/bin/RadioApp in package vis doesn't have GNU_HASH (didn't pass LDFLAGS?) [ldflags]
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
|
|
fw_qmss*
Workaround for these:
.../ti/drv/cppi/test/k2h/armv7/linux/fw_main.c:50: multiple definition of `coreNum';
./obj/k2h/cppi/test/cppi_test.o:.../ti/drv/cppi/test/src/cppi_test.c:102: first defined here
.../ti/drv/cppi/test/k2h/armv7/linux/fw_main.c:50: multiple definition of `errorCount';
./obj/k2h/cppi/test/cppi_test.o:.../ti/drv/cppi/test/src/cppi_test.c:102: first defined here
.../ti/drv/cppi/test/k2h/armv7/linux/fw_test.h:85: multiple definition of `fw_passCfgVaddr';
./obj/k2h/cppi/test/cppi_test.o:.../ti/drv/cppi/test/k2h/armv7/linux/fw_test.h:85: first defined here
.../ti/drv/cppi/test/k2h/armv7/linux/fw_test.h:84: multiple definition of `fw_srioCfgVaddr';
./obj/k2h/cppi/test/cppi_test.o:.../ti/drv/cppi/test/k2h/armv7/linux/fw_test.h:84: first defined here
.../ti/drv/cppi/test/k2h/armv7/linux/fw_test.h:83: multiple definition of `fw_qmssDataVaddr';
./obj/k2h/cppi/test/cppi_test.o:.../ti/drv/cppi/test/k2h/armv7/linux/fw_test.h:83: first defined here
.../ti/drv/cppi/test/k2h/armv7/linux/fw_test.h:82: multiple definition of `fw_qmssCfgVaddr';
./obj/k2h/cppi/test/cppi_test.o:.../ti/drv/cppi/test/k2h/armv7/linux/fw_test.h:82: first defined here
Needs to be fixed properly later:
https://gcc.gnu.org/gcc-10/porting_to.html
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
|
|
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Cc: Gowtham Tammana <g-tammana@ti.com>
Reviewed-by: Gowtham Tammana <g-tammana@ti.com>
|
|
ti-uboot-staging: Update to the latest commit
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
|
|
The J7200/AM64 ti-sci-fw needs to be installed in the deploy
directory so that it can be packaged in Processor SDK bundle
This is required because the ti-sci-fw is needed in the
installer prebuilt-images in order to build the combined boot
image for J7200/AM64
Signed-off-by: Lucas Weaver <l-weaver@ti.com>
|
|
ti-uboot-staging: Update to the latest commit
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
|
|
Update the Rogue kernel driver sources to version 1.13.5776728.
Signed-off-by: Gowtham Tammana <g-tammana@ti.com>
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
|
|
Update the wl18xx firmware recipe to latest version 8.9.0.0.86
Signed-off-by: Nikhil Devshatwar <nikhil.nd@ti.com>
Reviewed-by: Denys Dmytriyenko <denis@denix.org>
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
|
|
ti-uboot-staging: Update to the latest commit
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
|
|
Update the image gen and linux-firmware commit SHAs so that
am65x, j7200 and j721e also picks v2021.01 sysfw and the applicable
DM update with following version
* 07.03.00.12 for J721E
* 07.03.00.10 for J7200
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
|
|
ti-uboot-staging: Update to the latest commit
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
|
|
update image get to latest
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
|
|
ti-uboot-staging: Update to the latest commit
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
|
|
Add combined boot flow support for the AM64XX SK device.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
|
|
Update SRCREV to latest commit that includes AM64xx SK platform
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
|
|
Latest versions of Linux kernel (5.10) and U-boot (2021.01) are not yet ready
for prime time in meta-ti and some features are still being migrated and causing
issues. The recipes are meant for development and not yet for production.
Normally selection of the version is done with PREFERRED_VERSION by the Distro
(e.g. Arago), but if not specified by a Distro (Poky, distroless, etc.), the
default is to use the latest version. Hence need to change the default to not
automatically pick the latest version that is not ready yet.
This can be removed/reverted once those versions are ready to be picked by
default.
Signed-off-by: Denys Dmytriyenko <denis@denix.org>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
|