Age | Commit message (Collapse) | Author |
|
Extra sub-layers will be created next and relevant content moved across them.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
Cleanup remaining recipes that are used by other platforms from any machine
overrides that still refer to deprecated Keystone1/2 platforms.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
Remove deprecated support for compiling Keystone1/2 RTOS components and
Linux firmwares using PDK, CSL, etc.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
As Keystone1/2 platforms are being deprecated.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
Those platforms are being deprecated and not supported in future meta-ti releases.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
commit ba0ddc5ae9eb ("conf: am437xx-evm: Remove non-existent dtb* from
5.10") removed all non-existent dtb* for am437xx-evm as they were not
available on linux 5.10 branch at that time.
This patch reintroduces following HDMI DTBs.
- am437x-gp-evm-hdmi.dtb
- am43x-epos-evm-hdmi.dtb
The required dts have been added to the 5.10LTS by these two following
commits:
- https://git.ti.com/cgit/ti-linux-kernel/ti-linux-kernel/commit/arch/arm/
boot/dts/am437x-gp-evm-hdmi.dts?h=ti-linux-5.10.y&id=25434078d3f93d1346af5
e52e0f150f9083321d8
- https://git.ti.com/cgit/ti-linux-kernel/ti-linux-kernel/commit/arch/arm/
boot/dts/am43x-epos-evm-hdmi.dts?h=ti-linux-5.10.y&id=c5114144b568e470a8f6
e613f7c6e8b88ad19d7e
Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
j7-evm instead of j7200-evm was included causing boot failure
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
Correct the boot image file that is causing build error
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
This patch adds support for J721e HS SR1.1
HS SR1.1 requires updated sysfw binary. Both SR1.0 and SR1.1 sysfw
binary will be generated. sysfw.itb will point to SR1.1
This patch requires J7 SR 1.1 support in K3 Image gen.
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
Machine conf for J7200 HS platform.
Used am64xx hs and j721e hs as reference.
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
Added missing dtbo k3-am654-evm-ov5640.dtbo required for system test
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
Add missing k3-am642-evm-nand.dtbo required for system test
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
Add new am64x hs platform. This requires two files to be created.
Used am65x and j7 hs platform for reference.
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
Add missing dtb and dtbo to deploy folder
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
The board name for J721E EdgeAI Kit (EAIK) is changed to J721E SK [1],
so replace the eaik dtb with sk dtb file
[1] https://www.ti.com/tool/SK-TDA4VM
Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
|
|
This reverts commit 43bf0f36a3ac62cc3378688358ba704a27b501ce.
Added dtb and dtbo for am57xx
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
|
|
This reverts commit 8bdfe1413c00e0c55132989dafcf8d91827999c3.
Introduces existent dtb and dtbo for dra7x
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
|
|
The uboot extlinux is using kernel device tree variable to populate the
dtb files. The error occurs if the device tree files are in ti folder
since there is no ti folder in deploy directory. Fix the kernel device
tree path before using in the uboot extlinux.
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
|
|
To make use of the "generic distro boot" support in U-Boot, an
extlinux.conf file needs to be generated and reside in the extlinux
directory. The extlinux.conf file will be parsed by U-Boot and the
"append" line will be evaluated and expanded and used entirely as the
bootargs passed to the kernel. Our generated extlinux.conf states
that the kernel image and device trees live one level up (so the root
directory) from it, so populate that location with our kernel and device
trees.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
|
|
All of our platforms here support running EFI binaries. We can have wic
generate a simple grub.cfg file for us that will find the root partition
via PARTUUID and utilize the device tree that is already discoverable
via the EFI configuration tables. Assuming the EFI loader is U-Boot,
this device tree can be replaced at run-time by the normal mechanism of
loading in to memory and passing that address as an argument to bootefi.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Tested-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
|
|
Upcoming "honister" release changes the override syntax to improve usability,
speed and memory footprint. Update recipes with the new syntax and set layer
compatibility to honister.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Tested-by: Paul Barker <paul.barker@sancloud.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
|
|
Build is failing for ti-rtos-firmware when ARAGO_BRAND = "mainline"
with below error:
"ERROR: ti-rtos-firmware-08.00.00.32-r0.0 do_fetch: Fetcher failure:
Unable to find file file://0001-Revert-soc-am64x-Makefile-Move-the-
SPL-Load-address-.patch;patchdir=../imggen anywhere."
This is because the mentioned patch is not present in the current path.
Fix this by updating the path to include ti-sci-fw
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
|
|
J721E EdgeAI Kit (EAIK) is a low cost, small form factor board designed
for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high
performance vision accelerators, video codec accelerators, latest C71x
and C66x DSP, high bandwidth real-time IPs for capture and display,
GPU, dedicated safety island and security accelerators.
J721E EAIK supports the following interfaces:
* 4 GB LPDDR4 RAM
* x1 Gigabit Ethernet interface
* x1 USB 3.0 Type-C port
* x3 USB 3.0 Type-A ports
* x1 PCIe M.2 E Key
* x1 PCIe M.2 M Key
* x2 CSI2 Camera interface (RPi and TI Camera connector)
* 40-pin Raspberry Pi compatible GPIO header
J721e EVM and EAIK uses the unified bootloader. Add j721e eaik dtb
for machine=j721e-evm
Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
|
|
commit 9ea50db095f9 ("conf: am65xx-evm: Remove non-existent dtb* from 5.10")
removed all non-existent dtb* for am65xx-evm as they were not
available on linux 5.10 branch at that time.
This patch reintroduces following display overlays.
- k3-am654-evm-tc358876.dtbo
- k3-am654-evm-oldi-lcd1evm.dtbo
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
|
|
This patch adds overlay to support icssg1-dualemac
ie: 1 x CPSW3g ports and 2 x ICSSG1 ports configuration
overlay: k3-am642-evm-icssg1-dualemac.dtbo
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
|
|
commit 8b206b32ec18 ("conf: j7-evm: Remove unavailable dtb/o from 5.10 kernel")
removed all non-existent dtb* for j7-evm as they were not
available on linux 5.10 branch at that time.
This patch reintroduces k3-j721e-common-proc-board-infotainment.dtbo overlay.
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
|
|
Added KERNEL_DTB_OVERLAY_SUPPORT to common ti-soc include. This fixes the issue
where the dtbs are build without symbols causing issue with overlays.
Please note this increases the size of the dtb for all platform
derived from ti-soc. So for custom boards disable it from local.conf to
reduce size.
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
|
|
With U-Boot supporting both am64xx-evm and am64xx-sk with single
defconfig, there is not need for a new machine for am64xx-sk.
So, drop support for am64xx-sk machine.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
|
As a step towards unification for am64xx-evm and am64xx-sk,
start including am64xx-sk dtb for machine=am64xx-evm.
Once U-Boot merges support for unified bootloader, am64xx-sk
machine can be dropped.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
|
ReIntroduce AM65x SR1.0 Overlay as the support for it
is added in the ti-linux-5.10.y kernel now.
Reviewed-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
|
|
commit 9ea50db095f9 ("conf: am65xx-evm: Remove non-existent dtb* from 5.10")
removed all non-existent dtb* for am65xx-evm as they were not
available on linux 5.10 branch at that time.
This patch reintroduces overlays present current on ti-linux-5.10.y kernel.
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
|
|
Remove the non-existent dtb* , as they are not currently present on
ti-linux-5.10.y.
- dra7-evm-lcd-osd101t2045.dtb
- dra7-evm-lcd-osd101t2587.dtb
- dra71-evm-nand.dtb
- dra71-evm-lcd-auo-g101evn01.0.dtb
- dra72-evm-lcd-osd101t2045.dtb
- dra72-evm-lcd-osd101t2587.dtb
- dra72-evm-revc-lcd-osd101t2045.dtb
- dra72-evm-revc-lcd-osd101t2587.dtb
- dra76-evm-tfp410.dtb
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
|
|
Remove the non-existent dtb* , as they are not currently present on
ti-linux-5.10.y.
- am57xx-evm-cam-ov10635.dtb
- am57xx-evm-reva3-cam-ov10635.dtb
- am571x-idk-lcd-osd101t2045.dtb
- am571x-idk-lcd-osd101t2587.dtb
- am572x-idk-lcd-osd101t2045.dtb
- am572x-idk-lcd-osd101t2587.dtb
- am574x-idk-lcd-osd101t2587.dtb
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
|
|
Remove the non-existent dtb* , as they are not currently present on
ti-linux-5.10.y.
- am437x-gp-evm-hdmi.dtb
- am43x-epos-evm-hdmi.dtb
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
|
|
Remove the non-existent dtb* , as they are not currently present on
ti-linux-5.10.y.
- am335x-icev2-prueth.dtb
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
|
|
Remove the non-existent dtb, as they are not currently present on
ti-linux-5.10.y.
- keystone-k2g-evm-lcd.dtb
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
|
|
Remove the non-existent dtb* , as they are not currently present on
ti-linux-5.10.y.
- ti/k3-am654-base-board-sr1.dtb
- ti/k3-am654-gp.dtbo
- ti/k3-am654-idk.dtbo
- ti/k3-am654-idk-sr1.dtbo
- ti/k3-am654-evm-hdmi.dtbo
- ti/k3-am654-evm-oldi-lcd1evm.dtbo
- ti/k3-am654-evm-tc358876.dtbo
- ti/k3-am654-pcie-usb2.dtbo
- ti/k3-am654-pcie-usb3.dtbo
- ti/k3-am654-base-board-jailhouse.dtbo
- ti/k3-am654-evm-prupwm.dtbo
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
|
|
Remove jailhouse overlay as it is not currently available in
ti-linux-5.10.y branch.
Removing for now, and shall be added back once they are
available in 5.10 kernel.
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
|
|
The following dtb/o are not currently available in
ti-linux-5.10.y branch.
Removing for now, and shall be added back once they are
available in 5.10 kernel.
- ti/k3-j721e-proc-board-tps65917.dtb
- ti/k3-j721e-common-proc-board-infotainment.dtbo
- ti/k3-j721e-pcie-backplane.dtbo
- ti/k3-j721e-common-proc-board-jailhouse.dtbo
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
|
|
Lets generate bmap files for bmaptool to use as well as default to use
with wic files.
NOTE: bmaptool can speed up flashing SD cards by 2x-3x by skipping
empty blocks of the image.
https://www.yoctoproject.org/docs/current/mega-manual/mega-manual.html#flashing-images-using-bmaptool
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
|
|
Switch to using all of multi-certificate boot images. This allows us
to create bootable images - in this case, we are missing tiboot3.bin
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
|
|
IMAGE type and dependencies can easily be centralized to SoC include
file. This is necessary to make sure that we don't do the duplication
and having multiple places to fix up.
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
|
|
Switch to using all of multi-certificate boot images. This allows us
to create bootable images - in this case, we are missing tiboot3.bin
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
|
|
wic and tar dependency on trusted firmware is wrong. It is u-boot build
that depends on trusted firmware deployment and is correctly handled by
u-boot recipe. No point in duplicating that dependency, so just clean it
all up.
Reported-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
|
|
We use the default IMAGE_BOOT_FILES configuration which matches up with
legacy boot configuration. Document the same to allow folks to
understand by just looking at the SoC include file.
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
|
|
We use the default IMAGE_BOOT_FILES configuration which matches up with
legacy boot configuration. Document the same to allow folks to
understand by just looking at the SoC include file.
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
|
|
Lets keep things consistent by providing two possibilities for platforms
to pick from - legacy boot and multi-certificate boot.
In legacy boot, the base bootloader and system firmware are
maintained as separate binaries (tiboot3.bin and sysfw.itb).
In multi-certificate boot that newer K3 devices support, ROM is smarter
and can handle multiple x509 certificate based images: so we can strip
out the sysfw.itb and integrate it as part of tiboot3.bin itself. This
improves authentication and overall system boot times since we are now
able to boot both the system controller and the boot processor in
parallel.
We do have a scheme currently to identify the images necessary for boot
etc, but things are handled on a platform conf file basis. We can
improve that by introducing the pattern at the top level include and use
the relevant pattern in platforms as needed.
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
|
|
Remove duplicate machine-specific redefines of UBOOT_BINARY, UBOOT_IMAGE and
UBOOT_SYMLINK variables, as they are already defined with same values in the
common k3r5.inc file.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
|
|
OPTEEMACHINE name as defined in the optee_os project [1] for
j721e is k3-j721e.
This patch fixes the name to correct target.
[1]: https://github.com/OP-TEE/optee_os/commit/87613cf9520db2e65bc8367d3e13c4217c13bdad
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Acked-by: Denys Dmytriyenko <denys@konsulko.com>
|