| Age | Commit message (Collapse) | Author |
|---|
|
"master" is currently thud (YP 2.6)
Signed-off-by: Tim Orling <timothy.t.orling@linux.intel.com>
|
|
Quiets:
WARNING: Layer systemdev should set LAYERSERIES_COMPAT_systemdev
in its conf/layer.conf file to list the core layer names it is
compatible with.
Signed-off-by: Tim Orling <timothy.t.orling@linux.intel.com>
|
|
Upstream meta-openembedded has dropped the layer
Signed-off-by: Tim Orling <timothy.t.orling@linux.intel.com>
|
|
This was removed in meta-intel, so do not reference it.
Signed-off-by: Joe Konno <joe.konno@intel.com>
|
|
With the usage of meta-oe the build will use xserver-common as a
replacement for x11-common as we see during rootfs generation:
"Multiple replacers for x11-common, using first one (xserver-common)"
With the installation of xserver-common instead of x11-common we then get
see an image creation failure because the dependency of
packagegroup-core-x11-utils-dev on x11-common cannot be satisfied:
* satisfy_dependencies_for: Cannot satisfy the following dependencies for packagegroup-core-x11-utils-dev:
* x11-common (= 0.1-r47) *
By setting VIRTUAL-RUNTIME_xserver_common we ensure that packagegroup-core-x11-utils-dev depends on what will be installed.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Joe Konno <joe.konno@intel.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
|
|
DPDK is a set of libraries and drivers for fast packet processing. It was
designed to run on any processors. The first supported CPU was Intel x86
and it is now extended to IBM Power 8, EZchip TILE-Gx and ARM.
DPDK can be found in meta-isg layer from meta-intel so we update layer
dependencies.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
|
|
meta-systemdev depends on meta-intel but the layer dependecy has not been
configured in layer.conf, fix this.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
|
|
The upstream recipe of xf86-video-intel now includes xvmc as one of the
default configurations so we need not select it anymore.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
|
|
We are seeing following WARNING during image build:
WARNING: Invalid protocol (svk) in PREMIRRORS: svk://.*/.*
http://downloads.yoctoproject.org/mirror/sources/
As with upstream commit below we remove SVK mirror since svk
fetcher was removed in bitbake 1.22
commit b2b59b14ecfe13ba794d92f97d1403d6503c7407
Author: Ross Burton <ross.burton@intel.com>
Date: Tue May 5 13:17:00 2015 +0100
poky.conf: remove SVK mirror
The svk fetcher was removed in bitbake 1.22 and oe-core master doesn't consider
svk: a valid URL for mirrors.
(From meta-yocto rev: fff0423522b9574698575b1a28cf77a7831371c1)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
|
|
This is a clone of upstream commit that made similar change to the
poky.conf distro configuration. Commit message duplicated below:
commit 013f7e286d72c51b52a72fdbff6cbc875b3a15ac
Author: Ross Burton <ross.burton@intel.com>
Date: Mon Feb 2 23:32:31 2015 +0000
poky.conf: use logic to edit WARN_QA and ERROR_QA
Instead of overriding WARN_QA and ERROR_QA, edit the defaults
to remove specific tests from WARN_QA and add them to ERROR_QA.
This should avoid tests being added to poky.conf but not insane.bbclass
(unknown-configure-option wasn't enabled in oe-core), or
vice versa (infodir wasn't enabled in Poky).
(From meta-yocto rev: 32f5014c871f5fd86262fb6a87b60360b1b21d07)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
we have successfully built the image with Fedora-21. This distro has also
been added to the upstream poky distro configuration.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
The layout of TMPDIR changed in fido. We will rebuild now with moving to
fido.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
The "poky-feed-config-opkg" dependency does not exist anymore and our
reference distro config (poky.conf) is not setting this anymore either.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
To support system development on a variety of systems we add the
filesystems layer which gives us access to the XFS and F2FS tools.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
A recent addition attempted to fix a build dependency with setting
RDEPENDS. This is not correct and we change it to the correct DEPENDS
syntax.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
We include the X Video Motion Compensation extension library (XvMC) in the
systemdev xfce images. This enables hardware rendered motion compensation
support and is required by some graphics workloads (for example,
video-cpu-usage) that we would like to use during system development.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
During build we see the message:
NOTE: multiple providers are available for jpeg (jpeg, libjpeg-turbo)
NOTE: consider defining a PREFERRED_PROVIDER entry to match jpeg
NOTE: multiple providers are available for jpeg-native (jpeg-native,
libjpeg-turbo-native)
NOTE: consider defining a PREFERRED_PROVIDER entry to match jpeg-native
We fix this by setting the preferred provider in the distro configuration
as recommended by
http://www.openembedded.org/wiki/PREFERRED_PROVIDER_for_jpeg_and_jpeg-native
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
The "wayland" distro feature directs packages to build any
wayland-specific functionality in. "pam" distro feature is necessary
because weston-launch, needed to run weston from KMS beginning with
weston v1.6, needs it.
This patch is separate for exploration purposes only-- I am happy to
squash it in the next patch iteration.
Signed-off-by: Joe Konno <joe.konno@intel.com>
Signed-off-by: Darren Hart <dvhart@infradead.org>
|
|
Additional QA checks file-rdeps and build-deps have been added in dizzy
in order to verify that file dependencies are satisfied (e.g. package
contains a script requiring /bin/bash) and build-time dependencies are
declared, respectively.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
We depend on a number of layers from meta-openembedded, enumerate them
here.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
The meta-systemdev layer provides a Distro definition (systemdev), and
image recipes intended for system development, validation, and
benchmarking.
The base systemdev-image provides a console-based image with analysis
tools, test suites, and benchmarks. The SDK variants add a toolchain and
development libraries. The XFCE variants add the XFCE desktop and
graphical benchmarks.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
Tim Orling
Joe Konno
Reinette Chatre
Darren Hart