aboutsummaryrefslogtreecommitdiffstats
path: root/conf
AgeCommit message (Collapse)AuthorFilesLines
2019-10-28conf/machine/dragonboard-845c.conf: Add linux-firmware-qcaAníbal Limón1-0/+1
Signed-off-by: Aníbal Limón <anibal.limon@linaro.org>
2019-10-08layer: Add zeus to compatible releaseKhem Raj1-1/+1
Signed-off-by: Khem Raj <raj.khem@gmail.com>
2019-08-23conf/machine: Add rmtfs and adsprpc in sdm845Julien Massot1-0/+2
(cherry picked from commit d5865c8a4e36cfd7ee8487ccea6b21f3f800208f)
2019-08-19Change references from qrtr-apps to qrtr.Aníbal Limón3-3/+3
Signed-off-by: Aníbal Limón <anibal.limon@linaro.org> (cherry picked from commit 3beeac3a60809607e02f1ff0826b1b86331ab00d)
2019-07-15conf/machine: Add qrtr-apps in sdm845Aníbal Limón1-0/+1
Signed-off-by: Aníbal Limón <anibal.limon@linaro.org> (cherry picked from commit 423138084e817a82d4e87ce7dbc146fc27114837)
2019-07-03dragonboard-845c: Add firmware recipeAníbal Limón1-0/+1
Signed-off-by: Aníbal Limón <anibal.limon@linaro.org>
2019-06-27draonboard845c: switch default rootfs on /dev/sda1Nicolas Dechesne1-3/+2
New bootloader package is now available from Linaro, and the default ptable is to leave /dev/sda (e.g. LUN0 or HLOS LUN) with a single partition that occupies the entire space. The default name for this partition is 'rootfs'. Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
2019-05-17qcom-sdm845.inc: use arch-armv8a tune instead of arch-armv8Nicolas Dechesne1-1/+1
arch-armv8 was removed from latest OE-Core. Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
2019-05-10machine/*/dragonbard-845c: Set ext4 rootfs image to 4096 block sizeAníbal Limón2-0/+4
Needed by QCOM UFS, set explicity because the block size is determined by mkfs.ext4 depending on the image size. Signed-off-by: Aníbal Limón <anibal.limon@linaro.org> (cherry picked from commit ad91e9e7eba5d82cae3f492eebb8f66acf6f3177)
2019-05-09conf/machine: Add initial machine definitions for db845cAníbal Limón2-0/+53
Signed-off-by: Aníbal Limón <anibal.limon@linaro.org> (cherry picked from commit a749ee4fbb0c815624168cc44a098fea15a1f683)
2019-04-01layer.conf: Add warrior to compatible release seriesKhem Raj1-1/+1
Signed-off-by: Khem Raj <raj.khem@gmail.com>
2019-02-07qcom-apq8096.inc: use arch-armv8a tune instead of arch-armv8Ricardo Salveti1-1/+1
arch-armv8 was removed from latest OE-Core. Signed-off-by: Ricardo Salveti <ricardo@foundries.io>
2019-02-07dragonboard-410c.conf: switch tune to cortexa53Ricardo Salveti1-1/+1
Switch to use a Cortex A53 tune file as it is now available in OE-Core. Signed-off-by: Ricardo Salveti <ricardo@foundries.io>
2019-01-04layer.conf: Use BBFILES_DYNAMIC to add meta-oeKhem Raj1-8/+4
* Distro's should decide via bblayers.conf on adding the layers, BSPs layers should provide for the machine policies * Utilize the dynamic layer feature from core Signed-off-by: Khem Raj <raj.khem@gmail.com>
2018-12-04conf/machine/include/qcom-apq8016.inc: Load qcom_q6v5_pil afer rmtfsAníbal Limón1-0/+3
To workaround problems when the DSP isn't ready load qcom_q6v5_pil after rmtfs, blacklist the module to avoid autoload on boot. Signed-off-by: Aníbal Limón <anibal.limon@linaro.org> (cherry picked from commit a122287169450f44a581f64501601a0e839df1a3)
2018-10-01layer.conf: Add thud to compatible layer seriesKhem Raj1-1/+1
Signed-off-by: Khem Raj <raj.khem@gmail.com>
2018-09-05kernel: append DTB to kernel imageNicolas Dechesne2-2/+0
Instead of using dtbTool to create a DT image , and include it into the boot image, we append DTB to the compressed kernel image. the LK bootloader knows how to retrieve DTB , when they are appeneded to compressed kernel image. Note: * it only works with compressed image. * dtbTool also typically adds msm-ids into the DTB, recent versions of LK exist that allow a single DTB to be used without the msm-ids, in which case it will work fine. when using older LK version, it is needed to patch the kernel and include the msm-ids. * QCOM_BOOTIMG_BUNDLE_DT can be unset , since we longer need the DT image to boot. Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
2018-06-28conf: machine: *.conf: added overwrite options for all machinesThorben Vornholz6-16/+16
Adding overwriting options to certain variables to supply i.e. a different kernel version or another serial output without having extra files. This also allows setting these values via environment. Signed-off-by: Thorben Vornholz <thorben.vornholz@baslerweb.com> [nicolas.dechesne@linaro.org: extended initial PR to apply to all machines, not just 820c] Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
2018-06-25db820c: update default boot deviceNicolas Dechesne1-1/+1
The DB820c default GPT was updated such that the 'rootfs' partition is now expected to be /dev/sda1. Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
2018-04-20qrtr: include qrtr and rmtfs by defaultNicolas Dechesne2-0/+10
qrtr and rmtfs are very standard user space helpers when using Qualcomm Snapdragon processors. They are used to manage services running on remote cores, such as modem, DSP, ... While they are needed for GPS, they could be needed for other use cases, so let's add them by default from now on, insead of as a dependency of GPSd. While at it, at them for 8016 and 8096 targets. Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
2018-04-16layer.conf: add LAYERSERIES_COMPAT markupRicardo Salveti1-0/+1
Allows the user to easily identify if the layer is compatible with oe-core. Signed-off-by: Ricardo Salveti <ricardo@opensourcefoundries.com>
2018-04-10machine: do not use _append for IMAGE_FSTYPESimage-fstypesNicolas Dechesne4-4/+4
As discussed on https://github.com/ndechesne/meta-qcom/issues/61, using _append will modify IMAGE_FSTYPES unconditionnally and won't give DISTRO a chance to override. Let's set sane, default settings using ?= (or +=). If a DISTRO wants to change them, we suppose they know what they do, and overwrite correctly. Reported-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org> Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
2018-04-10machine: Introduce the Dragonboard 600c machineBjorn Andersson1-0/+21
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> [ndec: fixed up firmware-qcom-sd-600eval] Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
2018-04-10dragonboard820c: switch to 4.14 kernelNicolas Dechesne1-1/+1
Now that the LT 4.14 kernel branch has support for 8096 and DB820c, let's use it by default. We no longer need (and maintain the 4.11 based recipe). At this point, the 4.14 recipe is expected to be used for all 8064, 8016 and 8096 machines. Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
2018-03-05dragonboard-820c.conf: define default u-boot machineRicardo Salveti1-0/+2
As DB820c is supported by u-boot upstream, define default machine configuration. Signed-off-by: Ricardo Salveti <ricardo@opensourcefoundries.com>
2018-03-05dragonboard-410c.conf: define default u-boot machineRicardo Salveti1-0/+2
As DB410c is supported by u-boot upstream, define default machine configuration. Signed-off-by: Ricardo Salveti <ricardo@opensourcefoundries.com>
2018-03-02machine: db820c: switch to rootfs partitionNicolas Dechesne1-1/+1
New GPT scheme has been released, and the default scheme for DB820c now has 'rootfs' partition, like on DB410c, which is /dev/sda7 on DB820c. Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
2017-12-06dragonboard-410c.conf: add wic.bmap image typeHéctor Orón Martínez1-1/+1
It would allow us to avoid uncompressing wic image every time we update SD card with new image using bmap-tools. Signed-off-by: Héctor Orón Martínez <hector.oron@collabora.co.uk>
2017-11-24dragonboard-410c.conf: use wic.gz by defaultRicardo Salveti1-1/+1
Prefer the compressed version of the sdcard image by default as it is substantially smaller. Signed-off-by: Ricardo Salveti <ricardo@opensourcefoundries.com>
2017-11-12Merge pull request #49 from madrypl/master-sdcard-image-supportNicolas Dechesne1-0/+8
Bootable SD card image - master
2017-11-12sdimg: use WIC to assemble sd-card imageArtur Mądrzak1-1/+7
2017-11-07dragonboard820c: include firmware packageNicolas Dechesne1-0/+1
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
2017-11-07firmware-qcom-dragonboard410c: remove ACCEPT_EULA variableNicolas Dechesne6-443/+2
Since r1032.1 the Qualcomm firmware have been released with a license that allows redistribution. And the file is now available publicly without the need for user to read/accept EULA. As such, we remove the constraint on meta-qcom as well. Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
2017-11-04sdimg: build bootimg for sd-cardArtur Mądrzak1-0/+2
2017-10-16dragonboard410c/820c: switch from Image to Image.gzNicolas Dechesne2-2/+2
LK can boot compressed image , and support for building compressed image was fixed in OE/core, in cfc0c89765 kernel.bbclass: fix KERNEL_IMAGETYPE(S) for Image.gz so let's switch to it. Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org> (cherry picked from commit 460dd30b384a1cd6253aa076f68316f772ec9215)
2017-06-23dragonboard820c: add firmware for ath10kNicolas Dechesne1-0/+1
Dragonboard 820c comes with a QCA6174 chip, on board, let's make sure that appropriate firmware are added to images when wifi is enabled. Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org> (cherry picked from commit 755332b65ebe9feabf9fe357b1c3aa3ac881fa62) (cherry picked from commit dbd4a2c6f70645b288ceec83efcbaa6287b929f6)
2017-05-09firmware-qcom-dragonboard: upgrade to r1032.1Nicolas Dechesne1-196/+176
Qualcomm has release Linux BSP firmware package r1032.1. Main changes are the following: * new LICENSE/EULA that allows redistribution * new SBL with support for CDT partition and LK signing * new DSP firmware with GPS and audio coexistence Since the new license allows redistribution, the firmware is no hosted on 96boards.org and the file is published as a standard ZIP file, not a self extractable archive as before. Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
2017-04-12dragonboard820c: rename kernel recipeNicolas Dechesne1-1/+1
For Dragonboard 820c we are currently using a custom kernel branch, rename the kernel recipe accordingly to make it more obvious that we are using such custom branch. Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
2017-03-01apq8096: enable freedreno graphicsNicolas Dechesne2-0/+15
Add SoC customization for mesa, gstreamer and xorg. Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
2016-12-22machine: apq8096: set pagesize to 4096Nicolas Dechesne1-1/+1
On 8096 machines (with UFS) the pagesize is 4096, not 2048. Not using the right size might create images which won't be loaded by the bootloader (lk). Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
2016-12-16xserver-xorg: switch to modesetting with glamor by defaultNicolas Dechesne2-6/+2
Following the recommendation from freedreno author, let's switch the DDX from -freedreno to -modesetting. http://bloggingthemonkey.blogspot.fr/2016/11/a-quick-note-for-usersdistros.html The freedreno driver will remain available in the BSP layer, but it will be less tested from now on. Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
2016-10-14linux-linaro-qcomlt: add 4.7 release branch for APQ8096 machinesNicolas Dechesne2-2/+2
Add a new recipe for the 4.7 kernel release branch , from LT git tree. This branch is mostly used for the 8096 machines. While other machines are regularly tested as well, the preferred kernel for 8016 and 8064 remains 4.4 branch. Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org> (cherry picked from commit 8fbb0af6c727c2959056bafe1918dfb9df4c75ec)
2016-09-22dragonboard-410c: create 32-bit machine configurationAndrey Konovalov4-1/+23
This 32-bit machine is not intended to build 32-bit linux kernel, so it uses "linux-dummy" for virtual/kernel provider, and doesn't include the kernel into the rootfs image. Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
2016-09-19dragonboard-{410c,820c}: remove unused variableNicolas Dechesne2-4/+0
CMDLINE is not used anywhere, remove it to avoid confusion. Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
2016-09-06linux-qcom-bootimg: consolidate deployment stepsMatt Madison7-0/+19
into a single do_deploy_append for all targets, and move the machine-/SoC-specific bootimg creation settings into the relevant configuration files. Signed-off-by: Matt Madison <matt@madison.systems> [nicolas.dechesne@linaro.org: move dt image symlink creation] Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
2016-07-14Merge branch 'jethro'Nicolas Dechesne2-0/+35
2016-07-14machine: add dragonboard 820cNicolas Dechesne2-0/+35
Add minimal machine configuration files for DragonBoard820c. It is currently supported in the LT tracking kernel branch. The support is minimal for now, and it will improve over time. Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
2016-07-05Merge branch 'jethro' into krogothNicolas Dechesne5-60/+90
2016-07-05sd-600eval: add new machineNicolas Dechesne1-0/+20
The SD 600eval is an APQ8064 based boards, following the 96boards CE specifications. More information on: https://eragon.einfochips.com/products/sd-600eval.html Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
2016-07-05improve spacing and indentation in machine configuration files and recipesNicolas Dechesne3-19/+23
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>