| Age | Commit message (Collapse) | Author |
|---|
|
Use "Yocto Project Compatible" in place of "compliance" as suggested
by Jeffrey Osier Mixon.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
With the newer (1.1.0 & 1.1.1) versions of libva recipe video playback is
giving segmentation fault at the end of playback. And the 1.0.16 version
of libva is working fine for the video playback. So specifying the specific
working version of libva recipe for all the EMGD based BSPs here.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Add the linux-yocto-rt_3.8.bbappend for every BSP supporting RT.
Do not update BSPs maintained by ISG.
Built, booted, and sniff tested with:
$ cyclictest -p 90 -D 10m -t
on all platforms. All boot and complete the test without abnormal
outliers with the following exceptions:
o sys940x generated a panic, reported to rt-user. Possibly hw related.
o fri2 fails to boot, hanging at "i8042: No controller found"
These need additional investigation, but shouldn't delay the merge of
the recipes themselves.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
In preparation for removal of the 3.2 kernel recipes, ensure that we
have 3.4.36-rt50 support for all BSPs supporting rt.
Do not update ISG maintained BSPs.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
And specify the LINUX_VERSION corresponding to the kernel branch commits.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
[YOCTO #3385]
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
|
|
Now the v3.8 kernel recipes are available in the oecore & meta-intel layers.
And also the v3.8 kernel is validated for these BSPs.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Provide the emenlow BSP specific extension for the linux-yocto_3.8
recipe from the oecore layer. This configures the right git branches of
the kernel repository for the emenlow BSP.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Provide the emenlow BSP specific extension for the linux-yocto-dev
recipe from the oecore layer. This configures the right git branches of
the kernel repository for the emenlow BSP.
This commit is addressing this bug:
[YOCTO #3931]
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Since mesa-dri got updated in the meta oe-core,
preferred versions point to revisions that don't exist.
So we update the current stable version.
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Acked by: Nitin A Kamble <nitin.a.kamble@intel.com>
|
|
Using AUTOREV turns out to cause problems with unreproducible
autobuilder builds and unwanted network access. This patch removes
kernel AUTOREVs and locks down SRCREVs and LINUX_VERSIONs.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
|
|
Mention the use of the graphics stack based on the kernel 'gma500'
driver as well as the 'modesetting' X driver for the emenlow-noemgd
machine configuration.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
This replaces the old VA_FEATURES method to specify the codecs.
These VA codecs are included in the image when image has 'hwcodec'
in the IMAGE_FEATURES.
And one can disable the VA features by redefining the IMAGE_FEATURES
var in the local.conf .
The gst-va-intel package pulls in emgd driver and x11 pieces, hence
it is moved to the XSERVERCODECS var.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
The switchover to emgd neglected to add the user documentation needed
for whitelisting the video components. This adds it and now matches
the other emgd-based BSPs.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
|
|
Move from 1.14 version to 1.16 version of the emgd driver for
graphics support.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
We want to use emgd-1.14 & emgd-1.16 recipe interchangeably.
As the some of the generated package names include versions
which will be different in the emgd-1.16 recipe, this
version part is stripped from the package names so that it
will match with the emgd-1.16 recipe package names.
All the BSP configuration which were using these package names
also change accordingly to avoid any build issues.
Also with the 2 versions of emgd recipes make sure that BSPs
don't start using the emgd-1.16 version until they have been
validated to work by specifying the preferred emgd recipe
version for the relevant BSPs.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
The link has changed on the yoctoproject website, updating the URL
in the BSP layer READMEs.
This fixes the bug:
[Yocto #3730]
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
This is based on the gma500/gma600 kernel driver and the
modesetting X driver for poulsbo graphics.
The gma500 driver needs soft cursor in X.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
This change avoids addition of emgd source code in the noemgd bsp kernels.
This configures the emenlow BSP kernel with EMGD graphics driver.
The VESA FB support is kept for boot time splash screen support.
This addresses the bug/feature request:
[YOCTO #2268]
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Fixes parsing errors which is appearing after this commit to
meta-openembedded
http://cgit.openembedded.org/meta-openembedded/commit/?id=3c21a46020bd0816579648f684c41dbd6333583e
This triggers
exception NameError: name 'base_contains' is not defined
without this change
Avoid the immediate expansion operator (:=) which caused base_contains
added in the previous commit to fail to expand at the time the
meta-intel layer configs are parsed and replace it with one of the
append operators (.= or +=) that allows for delayed variable expansion.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Acked-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
The following EMGD subpackages provide video acceleration and have
dependencies on libva and libx11:
emgd-driver-video
emgd-gst-plugins-va-0.10.10
emgd-gst-plugins-mixvideo-0.10.34
Include these in the VA_FEATURES variable only when the EMGD XSERVER
is included in the image.
For images such as core-image-lsb which do not include X components,
including any of these emgd subpackages will pull in unwanted X
components. This fixes that problem.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Add a web link in the readme so that one can find other embedded
platforms provided by Intel.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Via "vmalloc=256MB" boot parameter ask kernel to keep enough
memory available for the emgd kernel driver allocation.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Not needed.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Instead of the denzil release specify the location of the source tarball
of danny release.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
This commit adds information about specifying this line
LICENSE_FLAGS_WHITELIST = "license_emgd-driver-bin_1.14"
in local.conf to get the EMGD support enabled for the BSP.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Add a link in the readme so that one can find further details
of the platfrom from the Internet.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Remove all the Poulsbo graphics driver specific meta data files.
And configure the BSP to use EMGD instead of psb for graphics stack.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
To ease development on unreleased BSPs, let the kernel SRCREV float.
This avoids constantly having to update the SRCREVs manually, and
assures we won't get into a situation where LINUX_VERSION doesn't
match the version set by the kernel recipe.
We'll lock down the kernel SRCREVs and set the matching LINUX_VERSION
when we do releases, but in the meantime, we can use AUTOREV.
Note that individual BSPs are always free to override this maintain
their own SRCREVs if they want to.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
The 3.2 and 3.4 kernels are the ones supported for Yocto 1.3, so
remove the 3.0 versions.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Update all the linux-yocto .bbappends with the latest kernel SRCREVs
and add explicit LINUX_VERSIONs for the 1.3 release, to prevent a
mismatch between the kernel version actually used in the machine
branch vs the version the recipe uses for the kernel image, which can
change with stable updates.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
The WEBTITLE will be used to publish the BSP on the Yocto Project Website.
And adding the Yocto Project Compliance information for the 1.3 release.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Keeping up2date with the latest HEADs of the branches
from kernel v3.4 repository
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
BSP maintainership for following BSPs is now transitioned from Tom to Nitin
sugarbay, emenlow, crownbay, jasperforest, chiefriver
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Replaces all uses of PRINC with the form:
PRINC := "${@int(PRINC) + N}"
Where N is the previously assigned value plus one to ensure a
monotonically increasing PRINC value.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Acked-by: Tom Zanussi <tom.zanussi@intel.com>
CC: Saul Wold <sgw@linux.intel.com>
CC: Nitin Kamble <nitin.a.kamble@intel.com>
|
|
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
libx11-trim doesn't exist anymore so setting that as the default isn't going to
work, resulting in a "multiple providers" error. Tthe default provider (libx11)
is good for 99.9% of people, so inherit that from oe-core.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
The psb video drivers use the EXA framework, so add a dependency on
xserver-psb-module-exa.
[YOCTO #3149]
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
The xserver-xf86-config .bbappends are still using FILESPATH - update
them to use FILESEXTRAPATHS as recommended by the Poky Reference
Manual and BSP Developer's Guides.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
The recipes these .bbappends correspond to were renamed, so rename
them here as well.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
The functionality previously added by these bbappends was already
handled in task-core-tools-profile.bb (now
packagegroup-core-tools-profile.bb), so remove these.
SYSTEMTAP = "systemtap"
SYSTEMTAP_mips = ""
LTTNGUST = "lttng-ust"
LTTNGUST_mips = ""
RDEPENDS_${PN} = "\
${PROFILETOOLS} \
${LTTNGUST} \
${SYSTEMTAP} \
${VALGRIND} \
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
The recent changes to enable GLES/EGL in mesa-dri have caused emenlow to fail:
ERROR: Trying to resolve runtime dependency libglu resulted in conflicting PREFERRED_PROVIDER entries being found.
The providers found were: ['/srv/home/pokybuild/yocto-autobuilder/yocto-slave/emenlow/build/yocto/meta-intel/meta-emenlow/recipes-graphics/xpsb-glx/xpsb-glx_0.18.bb', '/srv/home/pokybuild/yocto-autobuilder/yocto-slave/emenlow/build/meta/recipes-graphics/mesa/mesa-dri_8.0.4.bb']
The PREFERRED_PROVIDER entries resulting in this conflict were: ['PREFERRED_PROVIDER_mesa-dri = xpsb-glx', 'PREFERRED_PROVIDER_virtual/libgles1 = mesa-dri']
Because emenlow's xpsb-glx contains mesa, it needs to entirely replace
mesa-dri. We'd normally set virtual/libgles1 and virtual/libgles2 to xpsb-glx
but these drivers don't build the GLES libraries so that would be a lie.
So, unset the preferred provider entries so that bitbake doesn't look at
mesa-dri at all.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
The recipes are no longer stored in a "packages" directory but in
directories under recipes-*.
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
To pick up most recent changes, including the matching kernel changes
for the perf-scripting/perf-tui features.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
This is tested on the emenlow hardware, and it works as expected.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Tested-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
emenlow needs to use the old 1.10.2 cairo library instead of the
upgraded version.
Fixes [YOCTO #2507]
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
The emenlow graphics stack doesn't work with the cairo_1.12.2 library
upgrade; this adds the old 1.10.2 recipe from poky locally to the
emenlow layer in order to get it working again.
Fixes [YOCTO #2507]
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
Nitin A Kamble
Darren Hart
Laurentiu Palcu
Alexandru DAMIAN
Tom Zanussi
Khem Raj
Richard Purdie
Tom Zanussi
Ross Burton
Trevor Woerner