| Age | Commit message (Collapse) | Author |
|---|
|
Use "Yocto Project Compatible" in place of "compliance" as suggested
by Jeffrey Osier Mixon.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
With the newer (1.1.0 & 1.1.1) versions of libva recipe video playback is
giving segmentation fault at the end of playback. And the 1.0.16 version
of libva is working fine for the video playback. So specifying the specific
working version of libva recipe for all the EMGD based BSPs here.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Add the linux-yocto-rt_3.8.bbappend for every BSP supporting RT.
Do not update BSPs maintained by ISG.
Built, booted, and sniff tested with:
$ cyclictest -p 90 -D 10m -t
on all platforms. All boot and complete the test without abnormal
outliers with the following exceptions:
o sys940x generated a panic, reported to rt-user. Possibly hw related.
o fri2 fails to boot, hanging at "i8042: No controller found"
These need additional investigation, but shouldn't delay the merge of
the recipes themselves.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
And specify the LINUX_VERSION corresponding to the kernel branch commits.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
[YOCTO #3385]
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
|
|
Now the v3.8 kernel recipes are available in the oecore & meta-intel layers.
And also the v3.8 kernel is validated for these BSPs.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Provide the crownbay BSP specific extension for the linux-yocto_3.8
recipe from the oecore layer. This configures the right git branches of
the kernel repository for the crownbay BSP.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Provide the crownbay BSP specific extension for the linux-yocto-dev
recipe from the oecore layer. This configures the right git branches of
the kernel repository for the crownbay BSP.
This commit is addressing this bug:
[YOCTO #3931]
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Since mesa-dri got updated in the meta oe-core,
preferred versions point to revisions that don't exist.
So we update the current stable version.
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Acked by: Nitin A Kamble <nitin.a.kamble@intel.com>
|
|
Using AUTOREV turns out to cause problems with unreproducible
autobuilder builds and unwanted network access. This patch removes
kernel AUTOREVs and locks down SRCREVs and LINUX_VERSIONs.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
|
|
This replaces the old VA_FEATURES method to specify the codecs.
These VA codecs are included in the image when image has 'hwcodec'
in the IMAGE_FEATURES.
And one can disable the VA features by redefining the IMAGE_FEATURES
var in the local.conf .
The gst-va-intel package pulls in emgd driver and x11 pieces, hence
it is moved to the XSERVERCODECS var.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Move from 1.14 version to 1.16 version of the emgd driver for
graphics support.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
We want to use emgd-1.14 & emgd-1.16 recipe interchangeably.
As the some of the generated package names include versions
which will be different in the emgd-1.16 recipe, this
version part is stripped from the package names so that it
will match with the emgd-1.16 recipe package names.
All the BSP configuration which were using these package names
also change accordingly to avoid any build issues.
Also with the 2 versions of emgd recipes make sure that BSPs
don't start using the emgd-1.16 version until they have been
validated to work by specifying the preferred emgd recipe
version for the relevant BSPs.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
clean up unused variable.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
The link has changed on the yoctoproject website, updating the URL
in the BSP layer READMEs.
This fixes the bug:
[Yocto #3730]
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
This change avoids addition of emgd source code in the noemgd bsp kernels.
This configures the crownbay BSP kernel with EMGD graphics driver
and crownbay-noemgd BSP kernel with just the VESA graphics driver.
The VESA FB support is kept for both BSPs for boot time splash screen
support.
This addresses the bug/feature request:
[YOCTO #2268]
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Fixes parsing errors which is appearing after this commit to
meta-openembedded
http://cgit.openembedded.org/meta-openembedded/commit/?id=3c21a46020bd0816579648f684c41dbd6333583e
This triggers
exception NameError: name 'base_contains' is not defined
without this change
Avoid the immediate expansion operator (:=) which caused base_contains
added in the previous commit to fail to expand at the time the
meta-intel layer configs are parsed and replace it with one of the
append operators (.= or +=) that allows for delayed variable expansion.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Acked-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
The following EMGD subpackages provide video acceleration and have
dependencies on libva and libx11:
emgd-driver-video
emgd-gst-plugins-va-0.10.10
emgd-gst-plugins-mixvideo-0.10.34
Include these in the VA_FEATURES variable only when the EMGD XSERVER
is included in the image.
For images such as core-image-lsb which do not include X components,
including any of these emgd subpackages will pull in unwanted X
components. This fixes that problem.
This fixes the following bug:
[YOCTO #3507]
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Use ${KMETA} variable instead of using the branch name "meta" directly.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Add links in the readme so that one can find on the Internet
further details of the platforms supported by this BSP.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Instead of the denzil release specify the location of the source tarball
of danny release.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
To ease development on unreleased BSPs, let the kernel SRCREV float.
This avoids constantly having to update the SRCREVs manually, and
assures we won't get into a situation where LINUX_VERSION doesn't
match the version set by the kernel recipe.
We'll lock down the kernel SRCREVs and set the matching LINUX_VERSION
when we do releases, but in the meantime, we can use AUTOREV.
Note that individual BSPs are always free to override this maintain
their own SRCREVs if they want to.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Update all the linux-yocto .bbappends with the latest kernel SRCREVs
and add explicit LINUX_VERSIONs for the 1.3 release, to prevent a
mismatch between the kernel version actually used in the machine
branch vs the version the recipe uses for the kernel image, which can
change with stable updates.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
The WEBTITLE will be used to publish the BSP on the Yocto Project Website.
And adding the Yocto Project Compliance information for the 1.3 release.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
commit 2231d38 (meta-intel: make video acceleration choice dependent
on LICENSE_FLAGS) inadvertently also changed '?=' to a hard
assignment, making it hard to override as intended. This changes it
back.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Now that gstreamer-vaapi doesn't depend on ffmpeg, it can always be recommended
by the machine configuration.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Keeping up2date with the latest HEADs of the branches
from kernel v3.4 repository
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
BSP maintainership for following BSPs is now transitioned from Tom to Nitin
sugarbay, emenlow, crownbay, jasperforest, chiefriver
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Avoid following warnings while building crownbay BSPs:
NOTE: preferred version 7.11 of mesa-dri not available (for item virtual/libgl)
NOTE: versions of mesa-dri available: 2:8.0.4 2:8.0.4+git1+c1f4867c89adb1a6b19d66ec8ad146115909f0a7
This commit addresses one of the issue reported on the bug:
[YOCTO #3238]
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Replaces all uses of PRINC with the form:
PRINC := "${@int(PRINC) + N}"
Where N is the previously assigned value plus one to ensure a
monotonically increasing PRINC value.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Acked-by: Tom Zanussi <tom.zanussi@intel.com>
CC: Saul Wold <sgw@linux.intel.com>
CC: Nitin Kamble <nitin.a.kamble@intel.com>
|
|
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
This is recommended in the EMGD User Guide.
My understanding is that, the emgd kernel driver need
to allocate memory dynamically, and the "vmalloc=256MB"
parameter ensures enough will be available for the driver.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
There's no need to support linux-yocto-3.0 for crownbay any more, so
remove the 3.0 bbappends.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
SMP support is now configured in the kernel branch, remove it from
recipe-space.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Add the -rt version of linux-yocto-3.4.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
The xserver-xf86-config .bbappends are still using FILESPATH - update
them to use FILESEXTRAPATHS as recommended by the Poky Reference
Manual and BSP Developer's Guides.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
The gst-ffmpeg recipe in oe-core had LICENSE_FLAGS added to make it
"commercial", so to avoid build errors the BSPs that use it (via the
gst-va-intel VA_FEATURE) should only include it if the user has added
"commercial" to LICENSE_FLAGS_WHITELIST when building.
This adds a conditional to detect that, along with a NOTE in the
README to explain the need for the flag.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
The functionality previously added by these bbappends was already
handled in task-core-tools-profile.bb (now
packagegroup-core-tools-profile.bb), so remove these.
SYSTEMTAP = "systemtap"
SYSTEMTAP_mips = ""
LTTNGUST = "lttng-ust"
LTTNGUST_mips = ""
RDEPENDS_${PN} = "\
${PROFILETOOLS} \
${LTTNGUST} \
${SYSTEMTAP} \
${VALGRIND} \
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Explicitly specify the va-impl-intel MACHINE_FEATURE, and update the
mixvideo uses with the feature rename.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
ia32-base.inc no longer contains everything these BSPs need - some of
what was in that file is now in meta-intel.inc, so we need to include
that too.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
KBRANCH_crownbay is set to standard/default/crownbay, which isn't even
a 3.4 branch.
Set it to standard/crownbay, which is.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Tested-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Add emgd branch info in git src_uri
At build time, the emgd-1.14 branch is merged with the crownbay bsp
kernel source branch to get emgd kernel driver's support.
Reference it in the src_uri, and its commit-id to be used, so that
any changes in the emgd branch will not affect build unknowingly.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Tested-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
1.14 is the latest released driver for emgd. This change is tested on
crownbay machine.
Add runtime dependency to libxcb-dri2
Otherwise the libxcb-dri2.so is not getting installed, and video
acceleration of emgd does not work. It is dynamic dependency of
emgd_drv_video.so
put files in gstreamer-0.10/.debug directory to the debug package.
It avoids debug files packaging warnings.
add downloadfilename param to SRC_URI
As the url does not have the filename of the tarball, specify it here
so that updated wget bitbake fetcher can save the downloaded file
accordingly.
BTW now EDC has also published another download URL on our request:
http://edc.intel.com/App_Shared/Downloads/LIN_IEMGD_1_14_GOLD_2443.tgz
And update emgd driver version in the README.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Tested-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
To pick up most recent changes, including the matching kernel changes
for the perf-scripting/perf-tui features.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
linux-yocto-2.6.37.bb was removed from oe-core, so remove the
corresponding .bbappend from meta-crownbay.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Update linux-yocto_3.2 kernel SRCREVS for crownbay, emenlow,
fishriver, jasperforest, sugarbay, and chiefriver.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Have crownbay use gst-va-intel and va-intel so we can easily test and
make use of the video acceleration capabilities of this machine.
Also have it use the gst-va-mixvideo so the emgd mixvideo components
get selected.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Update the README.sources for all the meta-intel BSPs to reflect final
Yocto tarball location for denzil.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
The 3.0 based boards are lazy compared to our new modern ones.
Without this patch, the linux-yocto-3.0 kernel do_patch() task would
fail with:
/srv/home/pokybuild/yocto-autobuilder/yocto-slave/cedartrail/build/build/tmp/sysroots/x86_64-linux/usr/bin/updateme:
line 434: yocto/standard/cedartrail-standard.scc: No such file or
directory
Setting the KBRANCH explicitly avoids this issue. This brings the
following recipes inline with the fri2 and sys940x BSPs.
Fix proposed by Bruce Ashfield.
Testing: Built linux-yocto_3.0 for all machines involved, including the
nopvr, noemgd variants. All built linux-yocto_3.0 successfully.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Tom Zanussi <tom.zanussi@intel.com>
CC: Bruce Ashfield <bruce.ashfield@windriver.com>
CC: Kishore Bodke <kishore.k.bodke@intel.com>
|
Nitin A Kamble
Darren Hart
Laurentiu Palcu
Alexandru DAMIAN
Tom Zanussi
Khem Raj
Tom Zanussi
Ross Burton