1 files changed, 83 insertions, 0 deletions
diff --git a/meta-fri2/README b/meta-fri2/README
new file mode 100644
index 00000000..7957a7fe
--- /dev/null
+++ b/meta-fri2/README
@@ -0,0 +1,83 @@
+This README file contains information on building the meta-fri2 BSP
+layer, and booting the images contained in the /binary directory.
+Please see the corresponding sections below for details.
+
+
+Table of Contents
+=================
+
+  I. Special notes on the meta-fri2 BSP layer
+ II. Building the meta-fri2 BSP layer
+III. Booting the images in /binary
+
+
+II. Building the meta-fri2 BSP layer
+=========================================
+
+In order to build an image with BSP support for a given release, you
+need to download the corresponding BSP tarball from the 'Board Support
+Package (BSP) Downloads' page of the Yocto Project website.
+
+Having done that, and assuming you extracted the BSP tarball contents
+at the top-level of your yocto build tree, you can build a fri2 image
+by adding the location of the meta-fri2 layer to bblayers.conf e.g.:
+
+  yocto/meta-intel/meta-fri2 \
+
+To enable the fri2 layer, add the fri2 MACHINE to local.conf:
+
+  MACHINE ?= "fri2"
+
+You should then be able to build a fri2 image as such:
+
+  $ source poky-init-build-env
+  $ bitbake poky-image-sato-live
+
+At the end of a successful build, you should have a live image that
+you can boot from a USB flash drive (see instructions on how to do
+that below, in the section 'Booting the images from /binary').
+
+As an alternative to downloading the BSP tarball, you can also work
+directly from the meta-intel git repository.  For each BSP in the
+'meta-intel' repository, there are multiple branches, one
+corresponding to each major release starting with 'laverne' (0.90), in
+addition to the latest code which tracks the current master.  Instead
+of extracting a BSP tarball at the top level of your yocto build tree,
+you can equivalently check out the appropriate branch from the
+meta-intel repository at the same location.
+
+
+III. Booting the images in /binary
+==================================
+
+This BSP contains bootable live images, which can be used to directly
+boot Yocto off of a USB flash drive.
+
+Under Linux, insert a USB flash drive.  Assuming the USB flash drive
+takes device /dev/sdf, use dd to copy the live image to it.  For
+example:
+
+# dd if=poky-image-sato-live-fri2-20101207053738.hddimg of=/dev/sdf
+# sync
+# eject /dev/sdf
+
+This should give you a bootable USB flash device.  Insert the device
+into a bootable USB socket on the target, and power on.  This should
+result in a system booted to the Sato graphical desktop.
+
+If you want a terminal, use the arrows at the top of the UI to move to
+different pages of available applications, one of which is named
+'Terminal'.  Clicking that should give you a root terminal.
+
+If you want to ssh into the system, you can use the root terminal to
+ifconfig the IP address and use that to ssh in.  The root password is
+empty, so to log in type 'root' for the user name and hit 'Enter' at
+the Password prompt: and you should be in.
+
+----
+
+If you find you're getting corrupt images on the USB (it doesn't show
+the syslinux boot: prompt, or the boot: prompt contains strange
+characters), try doing this first:
+
+# dd if=/dev/zero of=/dev/sdf bs=1M count=512