diff options
Diffstat (limited to 'meta-emenlow/README')
-rw-r--r-- | meta-emenlow/README | 148 |
1 files changed, 0 insertions, 148 deletions
diff --git a/meta-emenlow/README b/meta-emenlow/README deleted file mode 100644 index eccc9f33..00000000 --- a/meta-emenlow/README +++ /dev/null @@ -1,148 +0,0 @@ -This README file contains information on building the meta-emenlow -BSP layer using any of the supported machine configurations, and -booting the images contained in the /binary directory. - -The 'eMenlow' platform consists of the Intel Atom Z5xx processor, -plus the Intel US15W System Controller Hub. - -Further information on the platform supported by this BSP can be -found here: - - http://www.portwell.com/products/detail.asp?CUSTCHAR1=WEBS-2120 - -Information on all IntelĀ® embedded platforms can be found here: - - http://www.intel.com/p/en_US/embedded/hwsw/hardware - -If you're only interested in booting the images in the /binary -directory of a BSP tarball you've downloaded, there's nothing special -to do - the appropriate images are already in the /binary directory -depending on which BSP tarball you downloaded. - -Please see the corresponding sections below for details. - - -Yocto Project Compatible -======================== - -This BSP is compatible with the Yocto Project as per the requirements -listed here: - - https://www.yoctoproject.org/webform/yocto-project-compatible-registration - - -Dependencies -============ - -This layer depends on: - - URI: git://git.openembedded.org/bitbake - branch: master - - URI: git://git.openembedded.org/openembedded-core - layers: meta - branch: master - - URI: git://git.yoctoproject.org/meta-intel - layers: intel - branch: master - - -Patches -======= - -Please submit any patches against this BSP to the meta-intel mailing list -(meta-intel@yoctoproject.org) and cc: the maintainer: - -Maintainer: Saul Wold <sgw@linux.intel.com> - -Please see the meta-intel/MAINTAINERS file for more details. - - -Table of Contents -================= - - I. Building the meta-emenlow BSP layer -II. Booting the images in /binary - - -I. Building the meta-emenlow BSP layer -======================================= - -In order to build an image with BSP support for a given release, you -need to download the corresponding BSP tarball from the 'Board Support -Package (BSP) Downloads' page of the Yocto Project website. - -Having done that, and assuming you extracted the BSP tarball contents -at the top-level of your yocto build tree, you can build an emenlow -image by adding the location of the meta-emenlow layer to -bblayers.conf, along with the meta-intel layer itself (to access -common metadata shared between BSPs) e.g.: - - yocto/meta-intel \ - yocto/meta-intel/meta-emenlow \ - -The meta-emenlow layer contains support for emenlow-noemgd machine -configuration. The previously supported emenlow machine with the -proprietary EMGD graphics driver has been retired. The 'emenlow-noemgd' -machine configuration uses the open source 'gma500' kernel DRM driver -along with the 'modesetting' X driver. - -To enable the layer add the following to the local.conf file: - - MACHINE ?= "emenlow-noemgd" - -You should then be able to build an emenlow image as such: - - $ source oe-init-build-env - $ bitbake core-image-sato - -At the end of a successful build, you should have a live image that -you can boot from a USB flash drive (see instructions on how to do -that below, in the section 'Booting the images from /binary'). - -As an alternative to downloading the BSP tarball, you can also work -directly from the meta-intel git repository. For each BSP in the -'meta-intel' repository, there are multiple branches, one -corresponding to each major release starting with 'laverne' (0.90), in -addition to the latest code which tracks the current master (note that -not all BSPs are present in every release). Instead of extracting a -BSP tarball at the top level of your yocto build tree, you can -equivalently check out the appropriate branch from the meta-intel -repository at the same location. - - -II. Booting the images in /binary -================================= - -This BSP contains bootable live images, which can be used to directly -boot Yocto off of a USB flash drive. - -Under Linux, insert a USB flash drive. Assuming the USB flash drive -takes device /dev/sdf, use dd to copy the live image to it. For -example: - -# dd if=core-image-sato-emenlow-noemgd.hddimg of=/dev/sdf -# sync -# eject /dev/sdf - -This should give you a bootable USB flash device. Insert the device -into a bootable USB socket on the target, and power on. This should -result in a system booted to the Sato graphical desktop. - -If you want a terminal, use the arrows at the top of the UI to move to -different pages of available applications, one of which is named -'Terminal'. Clicking that should give you a root terminal. - -If you want to ssh into the system, you can use the root terminal to -ifconfig the IP address and use that to ssh in. The root password is -empty, so to log in type 'root' for the user name and hit 'Enter' at -the Password prompt: and you should be in. - ----- - -If you find you're getting corrupt images on the USB (it doesn't show -the syslinux boot: prompt, or the boot: prompt contains strange -characters), try doing this first: - -# dd if=/dev/zero of=/dev/sdf bs=1M count=512 |