diff options
| -rw-r--r-- | meta-fri2/README | 86 |
1 files changed, 12 insertions, 74 deletions
diff --git a/meta-fri2/README b/meta-fri2/README index 2f8a5a4f..df2fa87a 100644 --- a/meta-fri2/README +++ b/meta-fri2/README @@ -8,7 +8,7 @@ processor, plus the Intel EG20T Platform Controller Hub (Tunnel Creek and various other machine-to-machine (m2m) capabilities. It also supports the E6xx embedded on-chip graphics via the Intel -Embedded Media and Graphics Driver (EMGD) 1.8 Driver. +Embedded Media and Graphics Driver (EMGD) 1.10 Driver. Dependencies @@ -43,8 +43,7 @@ Table of Contents ================= I. Building the meta-fri2 BSP layer - II. Special notes for building the meta-fri2 BSP layer -III. Booting the images in /binary + II. Booting the images in /binary I. Building the meta-fri2 BSP layer @@ -66,7 +65,7 @@ between BSPs) e.g.: The meta-fri2 layer contains support for two different machine configurations. These configurations are identical except for the fact that the one prefixed with 'fri2' makes use of the Intel-proprietary -EMGD 1.8 graphics driver, while the one prefixed with 'fri2-noemgd' +EMGD 1.10 graphics driver, while the one prefixed with 'fri2-noemgd' does not. If you want to enable the layer that supports EMGD graphics add the @@ -74,6 +73,13 @@ following to the local.conf file: MACHINE ?= "fri2" +The 'fri2' machine includes the emgd-driver-bin package, which has a +proprietary license that must be whitelisted by adding the string +"license_emgd-driver-bin_1.10" to the LICENSE_FLAGS_WHITELIST variable +in your local.conf. For example: + + LICENSE_FLAGS_WHITELIST = "license_emgd-driver-bin_1.10" + If you want to enable the layer that does not support EMGD graphics add the following to the local.conf file: @@ -99,76 +105,8 @@ equivalently check out the appropriate branch from the meta-intel repository at the same location. -II. Special notes for building the meta-fri2 BSP layer -====================================================== - -The meta-fri2 layer makes use of the proprietary Intel EMGD userspace -drivers when building the "fri2" machine (but not when building the -"fri2-noemgd" machine). If you got the BSP from the 'BSP Downloads' -section of the Yocto website, the EMGD binaries needed to perform the -build will already be present in the BSP, located in the -meta-intel/common/recipes-graphics/xorg-xserver/emgd-driver-bin-1.8 -directory, and you can ignore the rest of this section. - -If you didn't get the BSP from the 'BSP Downloads' section of the -Yocto website, you can download a tarball containing an rpm that -contains the binaries and extract the binaries from that, and copy -them to the proper location in the meta-fri2 layer. - -The following subsection describes that process in detail. - - -Downloading and extracting the binaries using the EMGD Linux tarball --------------------------------------------------------------------- - -The first step of the process is to download the EMGD 1.8 Driver. -Here is the current link to the URL from which it can be downloaded: - -http://edc.intel.com/Software/Downloads/EMGD/ - -In the Download Now tab, select: - -Intel® architecture-based product: Linux Tar Ball -Operating System: MeeGo* 1.2 IVI Linux* (kernel 2.6.37, X.server 1.9, Mesa 7.9) - -That will give you a large .tgz file: - -Lin_EMGD_1_8_RC_2032.tgz - -Extract the files in the tar file, which will in turn give you a -directory named IEMGD_HEAD_Linux. - -The binaries are contained in an rpm file; you can extract the -binaries from the rpm file using rpm2cpio and cpio: - -$ cd IEMGD_HEAD_Linux/MeeGo1.2 -$ rpm2cpio emgd-bin-2032-1.6.i586.rpm > emgd-bin-2032-1.6.i586.cpio -$ mkdir extracted; cd extracted -$ cpio -idv < ../emgd-bin-2032-1.6.i586.cpio - -Finally, you can copy the xorg-xserver binaries to the -emgd-driver-bin-1.8 directory in meta-intel/common: - -$ cp -a usr/lib meta-intel/common/recipes-graphics/xorg-xserver/emgd-driver-bin-1.8 - -You also need to copy the IEMGD License.txt file to the same directory: - -$ cp IEMGD_HEAD_Linux/License/License.txt meta-intel/common/recipes/xorg-xserver/emgd-driver-bin-1.8 - -Additionally, you should remove the following unused file from the -emgd binaries in order to avoid a packaging error at build-time: - -$ rm meta-intel/common/recipes-graphics/xorg-xserver/emgd-driver-bin-1.8/lib/dri/emgd_drv_video.so - -Finally, you need to remove the following file: - -$ rm meta-intel/common/recipes-graphics/xorg-xserver/emgd-driver-bin-1.8/lib/dri/emgd_drv_video.so - -At this point, you should be able to build meta-fri2 images as usual. - - -III. Booting the images in /binary -================================== +II. Booting the images in /binary +================================= This BSP contains bootable live images, which can be used to directly boot Yocto off of a USB flash drive. |