aboutsummaryrefslogtreecommitdiffstats
path: root/conf/machine
AgeCommit message (Collapse)Author
2015-07-20t1040rdb[-64b]: remove as it is not supportedTing Liu
The board is not supported in SDK 1.8 and as it is untested QorIQ team does not offer support for it. Drop the board to avoid user using untested BSP components in this board. But t1040d4rdb which has the same soc with t1040rdb is supported. Signed-off-by: Ting Liu <ting.liu@freescale.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br>
2015-07-20t1042rdb-pi[-64b]: remove as it is not supportedTing Liu
The board is not supported in SDK 1.8 and as it is untested QorIQ team does not offer support for it. Drop the board to avoid user using untested BSP components in this board. But t1042d4rdb which has the same soc with t1042rdb-pi is supported. Signed-off-by: Ting Liu <ting.liu@freescale.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br>
2015-07-20t1042rdb[-64b]: remove as it is not supportedTing Liu
The board is not supported in SDK 1.8 and as it is untested QorIQ team does not offer support for it. Drop the board to avoid user using untested BSP components in this board. But t1042d4rdb which has the same soc with t1040rdb is supported. Signed-off-by: Ting Liu <ting.liu@freescale.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br>
2015-07-20t1024qds[-64b]: remove as it is not supportedTing Liu
The board is not supported in SDK 1.8 and as it is untested QorIQ team does not offer support for it. Drop the board to avoid user using untested BSP components in this board. But t1024rdb which has the same soc with t1024qds is supported. Signed-off-by: Ting Liu <ting.liu@freescale.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br>
2015-07-20t1042d4rdb[-64b]: add machine filesTing Liu
The T1042D4 Reference Design Board (RDB) system is a hardware board featuring the Freescale QorIQ T1042 processor with two Power e5500 cores. T1042D4RDB board Overview ------------------------------------- - SERDES Connections, 8 lanes supporting: - PCI - SGMII - SATA 2.0 - QSGMII(only for T1040D4RDB) - DDR Controller - Supports rates of up to 1600 MHz data-rate - Supports one DDR4 UDIMM -IFC/Local Bus - NAND flash: 1GB 8-bit NAND flash - NOR: 128MB 16-bit NOR Flash - Ethernet - Two on-board RGMII 10/100/1G ethernet ports. - PHY #0 remains powered up during deep-sleep - CPLD - Clocks - System and DDR clock (SYSCLK, ¡°DDRCLK¡±) - SERDES clocks - Power Supplies - USB - Supports two USB 2.0 ports with integrated PHYs - Two type A ports with 5V@1.5A per port. - SDHC - SDHC/SDXC connector - SPI - On-board 64MB SPI flash - I2C - Devices connected: EEPROM, thermal monitor, VID controller - Other IO - Two Serial ports - ProfiBus port Signed-off-by: Ting Liu <ting.liu@freescale.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br>
2015-07-20t1040d4rdb[-64b]: add machine filesTing Liu
The T1040D4 Reference Design Board (RDB) system is a hardware board featuring the Freescale QorIQ T1040 processor with two Power e5500 cores. T1040D4RDB board Overview ------------------------------------- - SERDES Connections, 8 lanes supporting: - PCI - SGMII - SATA 2.0 - QSGMII(only for T1040D4RDB) - DDR Controller - Supports rates of up to 1600 MHz data-rate - Supports one DDR4 UDIMM -IFC/Local Bus - NAND flash: 1GB 8-bit NAND flash - NOR: 128MB 16-bit NOR Flash - Ethernet - Two on-board RGMII 10/100/1G ethernet ports. - PHY #0 remains powered up during deep-sleep - CPLD - Clocks - System and DDR clock (SYSCLK, ¡°DDRCLK¡±) - SERDES clocks - Power Supplies - USB - Supports two USB 2.0 ports with integrated PHYs - Two type A ports with 5V@1.5A per port. - SDHC - SDHC/SDXC connector - SPI - On-board 64MB SPI flash - I2C - Devices connected: EEPROM, thermal monitor, VID controller - Other IO - Two Serial ports - ProfiBus port Signed-off-by: Ting Liu <ting.liu@freescale.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br>
2015-07-20t1023rdb[-64b]: add machine filesTing Liu
The T1023 Reference Design Board (RDB) system is a hardware board featuring the Freescale QorIQ T1023 processor with two Power e5500 cores and speed up to 1.4 GHz. T1023RDB board Overview ----------------------- - CoreNet fabric supporting coherent and noncoherent transactions with prioritization and bandwidth allocation - Memory: 2GB Micron MT40A512M8HX unbuffered 32-bit fixed DDR4 without ECC - Accelerator: DPAA components consist of FMan, BMan, QMan, DCE and SEC - Ethernet interfaces: - one 1G RGMII port on-board(RTL8211F PHY) - one 1G SGMII port on-board(RTL8211F PHY) - one 2.5G SGMII port on-board(AQR105 PHY) - PCIe: Two Mini-PCIe connectors on-board. - SerDes: 4 lanes up to 10.3125GHz - NOR: 128MB S29GL01GS110TFIV10 Spansion NOR Flash - NAND: 512MB S34MS04G200BFI000 Spansion NAND Flash - eSPI: 64MB S25FL512SAGMFI010 Spansion SPI flash. - USB: one Type-A USB 2.0 port with internal PHY - eSDHC: support SD/MMC card and eMMC on-board - 256Kbit M24256 I2C EEPROM - RTC: Real-time clock DS1339 on I2C bus - UART: one serial port on-board with RJ45 connector - Debugging: JTAG/COP for T1023 debugging Signed-off-by: Ting Liu <ting.liu@freescale.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br>
2015-07-20p2/p3/p5/t2/t4/b4: build usdpaa-shared-interfaces.dtbTing Liu
Also split long line to multiple ones. Signed-off-by: Ting Liu <ting.liu@freescale.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br>
2015-07-20t1/t2/t4/b4: update KERNEL_DEFCONFIGTing Liu
The KERNEL_DEFCONFIG needs to be updated with the latest kernel codes. * 85xx/e6500rev2_defconfig -> corenet64_fmanv3h_smp_defconfig * corenet64_fmanv3_smp_defconfig -> corenet64_fmanv3l_smp_defconfig * corenet32_fmanv3_smp_defconfig -> corenet32_fmanv3l_smp_defconfig Signed-off-by: Ting Liu <ting.liu@freescale.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br>
2015-01-14remove default setting for ubifsTing Liu
this is not bsp related, remove it. Signed-off-by: Ting Liu <ting.liu@freescale.com>
2015-01-14move all common definitions onto qoriq-base.incTing Liu
Signed-off-by: Ting Liu <ting.liu@freescale.com>
2015-01-13add QE_UCODE definition in machine.confTing Liu
Signed-off-by: Ting Liu <ting.liu@freescale.com>
2015-01-12multilib: use ?= to allow overridden in local.confTing Liu
The multilib setting was set in <core>.inc which was included by the <machine>.conf. In bitbake.conf, <machine>.conf is included after local.conf. Change to use ?= to not override the value in local.conf. This is useful when using external toolchain which does not need to enable multilib. Signed-off-by: Zongchun Yu <Zongchun.Yu@freescale.com>
2015-01-08add more secure u-boot into default build listTing Liu
Signed-off-by: Ting Liu <ting.liu@freescale.com>
2015-01-08openssl: upgrade to 1.0.1i plus Freescale patchesCristian Stoica
- include fixes for algorithm registration and 32-bit application hanging on E5500 cores. - add offloading suport for aes-gcm - upstream patches are kept except for the documentation patch which is no longer necessary Signed-off-by: Cristian Stoica <cristian.stoica@freescale.com>
2015-01-08udev-extraconf: replace bbappend with own recipeTing Liu
* introduce variable RULE for DPAA FMan ethernet ports name rule. * use 72-fsl-dpaa-persistent-networking.rules for t1024, same as e6500. Signed-off-by: Ting Liu <ting.liu@freescale.com>
2015-01-08t1024rdb-64b: add machine supportTing Liu
Signed-off-by: Ting Liu <ting.liu@freescale.com>
2015-01-08t1024rdb: add machine supportTing Liu
Signed-off-by: Ting Liu <ting.liu@freescale.com>
2015-01-08t1024qds: add machine supportTing Liu
Signed-off-by: Ting Liu <ting.liu@freescale.com>
2015-01-08t1024qds-64b: add machine supportTing Liu
Signed-off-by: Ting Liu <ting.liu@freescale.com>
2015-01-07p2020ds: remove as it is not supported nowTing Liu
Signed-off-by: Ting Liu <ting.liu@freescale.com>
2015-01-07t104x: use kernel defconfig corenet_fmanv3_smp_defconfigTing Liu
The defconfig in kernel source was renamed. Signed-off-by: Ting Liu <ting.liu@freescale.com>
2015-01-07t1042rdb: add machine supportTing Liu
This is a board with t1042rdb u-boot/rcw/dtb, the others are the same wtih t1040rdb Signed-off-by: Ting Liu <ting.liu@freescale.com>
2015-01-07rename t1042rdb -> t1042rdb-piTing Liu
Current configuration of t1042rdb was targeted for printing market, rename it to t1042rdb-pi. Signed-off-by: Ting Liu <ting.liu@freescale.com>
2014-07-29add more generic SOC_FAMILY name t1/t2/t4/b4Ting Liu
currently the SOC_FAMILY name only cover 32b/64b for each one. add a more generic one to make it more usable. Signed-off-by: Ting Liu <b28495@freescale.com>
2014-07-23enable multilib for e5500-64b/e6500/e6500-64bTing Liu
enable multilib by default as it is needed: * for e5500-64b/e6500-64b, 32bit toolchain is need to build u-boot * for e6500, only 64bit kernel is supported Signed-off-by: Ting Liu <ting.liu@freescale.com>
2014-07-15add default setting for MKUBIFS_ARGS and UBINIZE_ARGSTing Liu
Signed-off-by: Ting Liu <b28495@freescale.com>
2014-07-15set IMAGE_CLASSES = "image_types_uboot" as defautTing Liu
Signed-off-by: Ting Liu <b28495@freescale.com>
2014-07-15add u-boot as EXTRA_IMAGEDEPENDSTing Liu
* As the doc said: EXTRA_IMAGEDEPENDS = "A list of recipes to build that do not provide packages for installing into the root filesystem." MACHINE_EXTRA_RRECOMMENDS = "A list of machine-specific packages to install as part of the image being built" * use += for MACHINE_EXTRA_RRECOMMENDS definition Signed-off-by: Ting Liu <b28495@freescale.com>
2014-07-15remove fslmachine MACHINEOVERRIDES usageTing Liu
fslmachine is too generic, use qoriq-ppc instead. Signed-off-by: Ting Liu <b28495@freescale.com>
2014-07-15linux-qoriq-sdk: rename to linux-qoriqTing Liu
like linux-imx, linux-qoriq is supposed to be provided and supported by Freescale. it uses latest linux codes on git.freescale.com Signed-off-by: Ting Liu <b28495@freescale.com>
2014-07-15u-boot: rename to u-boot-qoriqTing Liu
like u-boot-imx, u-boot-qoriq is supposed to be provided and supported by Freescale. it uses latest u-boot codes on git.freescale.com Signed-off-by: Ting Liu <b28495@freescale.com>
2014-07-15conf/machine/: move common bits to inc filesTing Liu
* add four new files to hold common bits: include/qoriq-base.inc include/qoriq-default-providers.inc include/qoriq-default-settings.inc include/qoriq-default-versions.inc * add 'qoriq-ppc' into list of MACHINEOVERRIDES Signed-off-by: Ting Liu <b28495@freescale.com>
2014-07-15remove obsolete PREFERRED_VERSION for virtual/kernelTing Liu
there is only one linux-qoriq-sdk recipe that is based on 3.12 now Signed-off-by: Ting Liu <b28495@freescale.com>
2014-07-15remove kernel26 machine feature usageTing Liu
kernel26 is now obsolete so remove it from the machine configs Signed-off-by: Ting Liu <b28495@freescale.com>
2014-07-15move all inc files to folder include/Ting Liu
Signed-off-by: Ting Liu <b28495@freescale.com>
2014-07-11openssl: set preferred version to 1.0.1gTing Liu
Signed-off-by: Ting Liu <b28495@freescale.com>
2014-07-08qemu: update to QEMU 1.7Stuart Yoder
Signed-off-by: Stuart Yoder <stuart.yoder@freescale.com>
2014-07-08update machine configure file for old boardsTing Liu
1.c293pcie: remove C293PCIE_NAND from UBOOT_MACHINE list 2.p1023rdb: update defconfig to p1023_defconfig Signed-off-by: Ting Liu <b28495@freescale.com>
2014-07-08add machine configure file for new boardsZongchun Yu
based on latest kernel/u-boot codes, add following boards: t1040rdb-64b t1040rdb t1042rdb-64b t1042rdb t2080rdb-64b t2080rdb t4240rdb-64b t4240rdb Signed-off-by: Ting Liu <ting.liu@freescale.com>
2014-06-03conf/machine/*.inc: install kernel-modules package for FSL PPC targetsFahad Arslan
Following boards are affected: - b4420qds-64b - b4420qds - b4860qds-64b - b4860qds - bsc9131rdb - bsc9132qds - c293pcie - p1010rdb - p1020rdb - p1021rdb - p1022ds - p1023rdb - p1025twr - p2020ds - p2020rdb - p2041rdb - p3041ds - p4080ds - p5020ds-64b - p5020ds - p5040ds-64b - p5040ds - t2080qds-64b - t2080qds - t4160qds-64b - t4160qds - t4240qds-64b - t4240qds Signed-off-by: Fahad Arslan <Fahad_Arslan@mentor.com>
2014-06-03conf/machine/*.conf: Rework information headerChunrong Guo
*Rework the information header to include a proper name, SoC and maintainer fields. This change has been done for follow boards: - b4420qds-64b - b4420qds - b4860qds-64b - b4860qds - bsc9131rdb - bsc9132qds - c293pcie - p1010rdb - p1020rdb - p1021rdb - p1022ds - p1023rdb - p1025twr - p2020ds - p2020rdb - p2041rdb - p3041ds - p4080ds - p5020ds-64b - p5020ds - p5040ds-64b - p5040ds - t2080qds-64b - t2080qds - t4160qds-64b - t4160qds - t4240qds-64b - t4240qds Signed-off-by: Chunrong Guo <B40290@freescale.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br>
2014-02-13t2080qds: add machine configure filesZongchun Yu
Signed-off-by: Zongchun Yu <Zongchun.Yu@freescale.com>
2014-01-12conf/machine/*: make KERNEL_DEFCONFIG overridableTing Liu
Signed-off-by: Ting Liu <b28495@freescale.com>
2014-01-12conf/machine/*: make KERNEL_DEVICETREE overridableTing Liu
Signed-off-by: Ting Liu <b28495@freescale.com>
2014-01-12c293pcie: add machine configure fileChunrong Guo
Signed-off-by: Chunrong Guo <B40290@freescale.com> Signed-off-by: Zhenhua Luo <zhenhua.luo@freescale.com>
2014-01-12update BOOTFORMAT_CONFIG for p1/p2 rdb boardsTing Liu
Signed-off-by: Ting Liu <b28495@freescale.com>
2014-01-12p1010rdb: update machine conf to support P1010RDB-PBZhenhua Luo
Signed-off-by: Zhenhua Luo <zhenhua.luo@freescale.com> Signed-off-by: Ting Liu <b28495@freescale.com>
2014-01-12b4/t4: use e6500rev2_defconfig as default configZhenhua Luo
Signed-off-by: Zhenhua Luo <zhenhua.luo@freescale.com> Signed-off-by: Ting Liu <b28495@freescale.com>
2013-10-10build b4420qds-usdpaa dts by defaultZongchun Yu
Signed-off-by: Zongchun Yu <Zongchun.Yu@freescale.com>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-04-23 10:59:12 +0000