blob: d6bf84a492ac5630917e5729113e1ad7935d937b (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
|
From 31b19f2736b7d1c5c209ff22a99aec1c3449fedc Mon Sep 17 00:00:00 2001
From: Stefano Babic <sbabic@denx.de>
Date: Wed, 9 May 2012 12:07:31 +0200
Subject: [PATCH 43/56] MX5: PAD_CTL_DRV_VOT_LOW and PAD_CTL_DRV_VOT_HIGH
exchanged
After an update to the MX51 reference manual (Rev. 5), the
values of the PAD_CTL_DRV_VOT_LOW and PAD_CTL_DRV_VOT_HIGH
are now clearly wrong:
"Bit 13:
High / Low Output Voltage Range. This bit selects the output voltage mode for
SD2_CMD. 0 High output voltage mode
1 Low output voltage mode"
The values are currently negated in code - fixed.
Reported-by: David Jander <david.jander@protonic.nl>
Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Marek Vasut <marek.vasut@gmail.com>
CC: David Jander <david.jander@protonic.nl>
Acked-by: David Jander <david.jander@protonic.nl>
Acked-by: Marek Vasut <marek.vasut@gmail.com>
---
arch/arm/include/asm/arch-mx5/iomux.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/include/asm/arch-mx5/iomux.h b/arch/arm/include/asm/arch-mx5/iomux.h
index 760371b..e3765a3 100644
--- a/arch/arm/include/asm/arch-mx5/iomux.h
+++ b/arch/arm/include/asm/arch-mx5/iomux.h
@@ -66,8 +66,8 @@ typedef enum iomux_pad_config {
PAD_CTL_HYS_ENABLE = 0x1 << 8, /* Hysteresis enabled */
PAD_CTL_DDR_INPUT_CMOS = 0x0 << 9,/* DDR input CMOS */
PAD_CTL_DDR_INPUT_DDR = 0x1 << 9,/* DDR input DDR */
- PAD_CTL_DRV_VOT_LOW = 0x0 << 13, /* Low voltage mode */
- PAD_CTL_DRV_VOT_HIGH = 0x1 << 13,/* High voltage mode */
+ PAD_CTL_DRV_VOT_LOW = 0x1 << 13, /* Low voltage mode */
+ PAD_CTL_DRV_VOT_HIGH = 0x0 << 13,/* High voltage mode */
} iomux_pad_config_t;
/* various IOMUX input functions */
--
1.7.10
|
