Age | Commit message (Collapse) | Author |
|
The fixes included are:
ASoC: pcm: Require both CODEC and CPU support when declaring stream caps
ASoC: mxs: mxs-saif: Split mxs_saif_dai into two elements
ARM: mxs: Pass the system revision
ARM: mxs: Print silicon version on boot
ARM: dt: Use the 'model' field for printing the hardware revision
Signed-off-by: Daiane Angolini <daiane.angolini@freescale.com>
|
|
It includes the same INCLUDE_DIR from imx-lib
Change-Id: Ie2a5aeff621a6c333e14d24a8c0e78a7b72ba50c
Signed-off-by: Daiane Angolini <daiane.angolini@freescale.com>
|
|
Create the .so file needed by -dev package.
Signed-off-by: Daiane Angolini <daiane.angolini@freescale.com>
|
|
libEGL is linked against libxrender so we must depend on libxrender
else linking against libEGL may fail.
Signed-off-by: Eric BĂ©nard <eric@eukrea.com>
|
|
The appending of MACHINE_FIRMWARE were broken as it were overwriting
the board value, the fix is to append the value properly.
Change-Id: I6e2290643e32443410fdde94a334e8dfa7c7b18c
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The gst-fsl-plugin package tries to 'dlopen' a library using the
symbolic link that points to the library file. But that symbolic link is
only installed with the development package (PN-dev), not with the
normal package.
This commit adds a patch that uses the soname of the library in dlopen
call.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
|
|
Change-Id: Ia794a2575b9c5b2d8782cf76c5fb99330846ade7
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Include following fixes:
* i.MX6: Enable ARM ERRATA #742230
* i.MX23: Fix DDR instability
This also updates 'mxsboot' recipe for the same snapshot to keep both
in sync.
Change-Id: Idf452ad4a37d6eb85cb7f5c6d04377e09fe1dd91
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
For MX5 machines, gst-fsl-plugin has build-time dependences on the
pre-built fsl-mm-mp3enc and fsl-mm-flv codec libraries.
If the mp3enc library is not in the sysroot, the 'libmfw_gst_mp3enc.so'
is not built.
If the fsl-mm-flv is not in the sysroot, the configure process warns
about:
"Unable to determine soname of lib_flv_parser_arm9_elinux.3.0.so library"
and the resulting 'aiur_registry.arm11.cf' gets a wrong entry for
flv_parser library.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Tested-by: Daiane Angolini <daiane.angolini@freescale.com>
|
|
Include following fixes:
* i.MX53 ARD: Backport environment fixes from 2013.07
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
2.6.35 1.1.0 branch does not officially support mx23.
Restrict its usage only for mx28.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
|
|
2.6.35 1.1.0 branch does not officially support mx23.
Let's use 'linux-fslc' as the default kernel for mx23.
Also disable perf only for mx28.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
|
|
Use the KERNEL_IMAGETYPE variable, making the class configurable for all
supported kernel image types.
This patch is tested with a 3rd-party board and a sabrelite board.
Signed-off-by: S. Fricke <sfricke@data-modul.com>
|
|
Improve the 'Contributing' section by adding a missing 'submit' (you should
submit the patches), list the meta-freescale address and also provide a link
to Yocto's contribution guidelines link.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
|
|
The driver try to dynamically load the DRI support code and it needs
to be available in rootfs for use in Xorg driver.
Change-Id: I549cf99ed46fd42864e0ad90b318211e5fe83e80
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The DRI module is dlopen by GLX code so we need to have it packaged.
Change-Id: Iabd579873a6ec26e9c7c6d8ab82e8461d5b83c38
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The Vivante DRI support requires GLX, DRI and DRI2 Xorg's extensions
to properly work, so we add them as explicit runtime dependencies to
avoid the removal of them by mistake.
Change-Id: I8c59fdf3bfec137b8ed3332e5c7398fed2cee58b
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The DRI support of Xorg is need to trigger the loading of Vivante
DRI. So we revert this change while we keep the removal of Xorg header
so we build against Vivante ones.
Change-Id: I1aff6f14eb48811aa30bb364f90e66114518c5e9
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This features the following updates:
* Merge of 3.8.8 stable release
* Fix for i.MX233 OlinuXino MMC boot
Change-Id: If61a5abacdf302bfb1d7002cb6ddb20c1a7cc41d
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This features the following updates:
* Fixes i.MX51EVK board support
* Update to 2013.04 final release
Change-Id: Ia3870c3306c4532cc4e2969941236c2f817b1c07
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
1.1.0 branch has been updated with a thermal sensor fix.
Update it to the top of tree.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
|
|
Correct term is 'branch', so update the comments.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
|
|
There are two important commits missing in branch 1.1.0 currently.
Update it to the top of tree.
Also, change 'tag' to 'branch' in the comment.
Reported-by: Rogerio Nunes <rogerio.nunes@freescale.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
|
|
This updates to U-Boot 2013.04-rc3 based code and changes the U-Boot
target for using in i.MX31PDK as it was changed in this release.
Change-Id: I670abc0bf709c86ebff8195b9dab00b21f2c4615
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Provides a new linux-fslc.inc file which abstracts the specific
changes for the linux-fslc based kernels. A new variable has been add
to linux-imx.inc to allow to skip the 'imx-test' specific hacks after
kernel install as 'imx-test' is not supported for Linux mainline.
Change-Id: I309ee9fa70f359e4d3b03af6cb68bf15d0745257
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
By default, the kernel uses the known value for the entry address
however we cannot rely on this for having the right value. To
workaround it we should pass LOADADDRESS value to the kernel build
system.
Change-Id: If6434c8a9ced044776766e7916ab391d28d685f1
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Correct entry point for mxs is 0x40008000.
Also remove the unneeded UBOOT_LOADADDRESS.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
|
|
Place the entry points for mx31 and mx35 into the common
imx-base.inc instead of having them in board .conf files and also remove
the unneeded UBOOT_LOADADDRESS occurrences.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
|
|
The recommended entry points for generating a uImage are the ones listed
in the zreladdr line of the kernel Makefile.boot file:
(arch/arm/mach-<soc>/Makefile.boot)
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
|
|
Include the latest fixes from 2.6.35 11.09.01 branch.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
|
|
Include following fixes:
* i.MX6Q SabreSD/SabreAUTO: Environment fix for 'mmc rescan'
* i.MX6SL EVK: Fix memory size
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This is used by Vivante for 2D acceleration support. Fixes some
slowness seen when testing GUI images.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The Xorg Vivante driver has a hardcoded module name as 'vivante_dri'
so we need to rename it for full Xorg acceleration to work.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
To ensure we catch when the makefile stops to install the .la file, we
ensure the install fails in case .la file does not exist.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The SOC_FAMILY uses the MACHINEOVERRIDES and it evaluates from left to
right. In this case, the most SoC specific value needs to be kept in
the right so it take precedence.
This has been catch when finding out why i.MX6SL EVK where using the
wrong value as entry point, and this was the root cause.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The code uses UBOOT_ENTRYPOINT as default value for UBOOT_LOADADDRESS
so we don't need to have the variable UBOOT_LOADADDRESS set unless
it's different from UBOOT_ENTRYPOINT. This also fix the i.MX6SL entry
point hex format.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
i.MX3 doesn't has GStreamer plugins packaged so we need to avoid its
installation for now.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The imx-audio package is currently only available for i.MX5 and i.MX6
so we should include it in every SoC family. This fixes i.MX31 and
i.MX35 image build due unsatisfied dependency.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The i.MX25, i.MX27, i.MX31 and i.MX35 are not fully supported and we
don't have the firmware package for them so comment them out so it
doesn't break the build.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The code includes kernel headers during the build so the kernel needs
to be built before doing the gst-fsl-plugins build.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The U-Boot 2013.04 does not has support for i.MX6DL SabreSD so ensure
we use U-Boot 2009.08 until it is added.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The multimedia plugins provided by Freescale will be
installed by default when adding gstreamer to image.
Signed-off-by: Daiane Angolini <daiane.angolini@freescale.com>
Change-Id: Idae0e65cb469643bd866caa3ed77af86f554616c
|
|
This version is only compatible with mx28.
Add PLATFORM_mx28=MX28
Change-Id: I8a38fabd756b140357fee6bab9e91c50b182601f
Signed-off-by: Daiane Angolini <daiane.angolini@freescale.com>
|
|
This version is only compatible with mx28
Change-Id: I29e8740f152c1713ff9bcb048b058450b1b2ca04
Signed-off-by: Daiane Angolini <daiane.angolini@freescale.com>
|
|
Include libfslcodec.inc file in order to reuse code
for future newer versions of this packaged to be added.
Change-Id: If75ae84fb13860999716ab34595ef2b0eada5219
Signed-off-by: Daiane Angolini <daiane.angolini@freescale.com>
|
|
This version is only compatible with mx28
Change-Id: I16aa17c16c2ee8d6e9c437de792adb5d159d5388
Signed-off-by: Daiane Angolini <daiane.angolini@freescale.com>
|
|
Include libfslcodec.inc file in order to reuse code
for future newer versions of this packaged to be added.
Change-Id: Ic9737f8a468680a9f8cb73baa59c4622655dc33a
Signed-off-by: Daiane Angolini <daiane.angolini@freescale.com>
|
|
This version is only compatible with mx28
Change-Id: Ia7d90a5d2c7df1b12b033a8ed4eab8b5bf5c8df1
Signed-off-by: Daiane Angolini <daiane.angolini@freescale.com>
|
|
Allow use of U-Boot mainline as default for i.MX6DL based boards.
Change-Id: I985d82b04238b7b9677b556f5986d9557ad11c2c
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|