aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorOtavio Salvador <otavio@ossystems.com.br>2014-09-11 15:51:09 -0300
committerOtavio Salvador <otavio@ossystems.com.br>2014-09-15 11:16:53 -0300
commitb4c85efb85d80b387ed4497fbfd0fdb557f0785d (patch)
treeb6c62277c2c7f9e438afe64ef0cc6ca74722c2e0
parente9bf647e10ff1e31f911d3236dbb22a1ad7ace9f (diff)
downloadmeta-fsl-arm-b4c85efb85d80b387ed4497fbfd0fdb557f0785d.tar.gz
meta-fsl-arm-b4c85efb85d80b387ed4497fbfd0fdb557f0785d.tar.bz2
meta-fsl-arm-b4c85efb85d80b387ed4497fbfd0fdb557f0785d.zip
linux-imx (3.10.17): Forward port 3.10.17-1.0.0 fixes
Freescale when doing 3.10.17-1.0.1 has ignored the fixes done, by themselves, in the 3.10.17-1.0.0 kernel. This includes following patches, rebased on top 3.10.17-1.0.1: ENGR00318392 ARM:imx6x: Save/restore SCU and some CP15 registers across suspend/resume ENGR00301078-2: ARM: dts: imx6sl-evk: add support for pfuze200 on imx6sl-evk ENGR00301078-1: ARM: dts: imx6dl-sabresd: add support for pfuze200 on mx6dl-sabresd pfuze100-regulator: Fix of_node_get() parameter regulator: pfuze100: Use of_get_child_by_name regulator: pfuze100: Add PFUZE200 support to Kconfig and module description regulator: pfuze100: Add terminate entry for [i2c|of]_device_id tables regulator: pfuze100: add pfuze200 support regulator: pfuze100: Fix address of FABID ENGR00309838 ARM: imx6sl: gpc: add chip revision check for dispmix Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
-rw-r--r--recipes-kernel/linux/linux-imx-3.10.17/0001-ENGR00309838-ARM-imx6sl-gpc-add-chip-revision-check-.patch52
-rw-r--r--recipes-kernel/linux/linux-imx-3.10.17/0002-regulator-pfuze100-Fix-address-of-FABID.patch36
-rw-r--r--recipes-kernel/linux/linux-imx-3.10.17/0003-regulator-pfuze100-add-pfuze200-support.patch506
-rw-r--r--recipes-kernel/linux/linux-imx-3.10.17/0004-regulator-pfuze100-Add-terminate-entry-for-i2c-of-_d.patch61
-rw-r--r--recipes-kernel/linux/linux-imx-3.10.17/0005-regulator-pfuze100-Add-PFUZE200-support-to-Kconfig-a.patch56
-rw-r--r--recipes-kernel/linux/linux-imx-3.10.17/0006-regulator-pfuze100-Use-of_get_child_by_name.patch34
-rw-r--r--recipes-kernel/linux/linux-imx-3.10.17/0007-pfuze100-regulator-Fix-of_node_get-parameter.patch44
-rw-r--r--recipes-kernel/linux/linux-imx-3.10.17/0008-ENGR00301078-1-ARM-dts-imx6dl-sabresd-add-support-fo.patch752
-rw-r--r--recipes-kernel/linux/linux-imx-3.10.17/0009-ENGR00301078-2-ARM-dts-imx6sl-evk-add-support-for-pf.patch1202
-rw-r--r--recipes-kernel/linux/linux-imx-3.10.17/0010-ENGR00318392-ARM-imx6x-Save-restore-SCU-and-some-CP1.patch133
-rw-r--r--recipes-kernel/linux/linux-imx_3.10.17.bb11
11 files changed, 2887 insertions, 0 deletions
diff --git a/recipes-kernel/linux/linux-imx-3.10.17/0001-ENGR00309838-ARM-imx6sl-gpc-add-chip-revision-check-.patch b/recipes-kernel/linux/linux-imx-3.10.17/0001-ENGR00309838-ARM-imx6sl-gpc-add-chip-revision-check-.patch
new file mode 100644
index 0000000..962a804
--- /dev/null
+++ b/recipes-kernel/linux/linux-imx-3.10.17/0001-ENGR00309838-ARM-imx6sl-gpc-add-chip-revision-check-.patch
@@ -0,0 +1,52 @@
+From 5dad39098c3c8686f23db638505bf00ae2cc092f Mon Sep 17 00:00:00 2001
+From: Robby Cai <r63905@freescale.com>
+Date: Fri, 23 May 2014 16:02:13 +0800
+Subject: [PATCH 01/10] ENGR00309838 ARM: imx6sl: gpc: add chip revision check
+ for dispmix
+Organization: O.S. Systems Software LTDA.
+
+The dispmix feature works without problem since TO1.2.
+This patch adds the back-compatibility for older chip.
+
+Signed-off-by: Robby Cai <r63905@freescale.com>
+(cherry picked from commit a187b916d55052fed10de1797009250095b598fb)
+
+Upstream-Status: Pending
+---
+ arch/arm/mach-imx/gpc.c | 8 +++++---
+ 1 file changed, 5 insertions(+), 3 deletions(-)
+
+diff --git a/arch/arm/mach-imx/gpc.c b/arch/arm/mach-imx/gpc.c
+index 9734327..25e987c 100644
+--- a/arch/arm/mach-imx/gpc.c
++++ b/arch/arm/mach-imx/gpc.c
+@@ -1,5 +1,5 @@
+ /*
+- * Copyright 2011-2013 Freescale Semiconductor, Inc.
++ * Copyright 2011-2014 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+@@ -90,7 +90,8 @@ static void imx_disp_clk(bool enable)
+
+ static void imx_gpc_dispmix_on(void)
+ {
+- if (cpu_is_imx6sl()) {
++ if (cpu_is_imx6sl() &&
++ imx_get_soc_revision() >= IMX_CHIP_REVISION_1_2) {
+ imx_disp_clk(true);
+
+ writel_relaxed(0x0, gpc_base + GPC_PGC_DISP_PGCR_OFFSET);
+@@ -105,7 +106,8 @@ static void imx_gpc_dispmix_on(void)
+
+ static void imx_gpc_dispmix_off(void)
+ {
+- if (cpu_is_imx6sl()) {
++ if (cpu_is_imx6sl() &&
++ imx_get_soc_revision() >= IMX_CHIP_REVISION_1_2) {
+ imx_disp_clk(true);
+
+ writel_relaxed(0xFFFFFFFF,
+--
+2.1.0
+
diff --git a/recipes-kernel/linux/linux-imx-3.10.17/0002-regulator-pfuze100-Fix-address-of-FABID.patch b/recipes-kernel/linux/linux-imx-3.10.17/0002-regulator-pfuze100-Fix-address-of-FABID.patch
new file mode 100644
index 0000000..ff36488
--- /dev/null
+++ b/recipes-kernel/linux/linux-imx-3.10.17/0002-regulator-pfuze100-Fix-address-of-FABID.patch
@@ -0,0 +1,36 @@
+From a38734076be8b4fbb1a9db757e1a69dddef61f63 Mon Sep 17 00:00:00 2001
+From: Axel Lin <axel.lin@ingics.com>
+Date: Mon, 9 Dec 2013 15:24:19 +0800
+Subject: [PATCH 02/10] regulator: pfuze100: Fix address of FABID
+Organization: O.S. Systems Software LTDA.
+
+According to the datasheet, the address of FABID is 0x4. Fix it.
+
+Signed-off-by: Axel Lin <axel.lin@ingics.com>
+Acked-by: Robin Gong <b38343@freescale.com>
+Signed-off-by: Mark Brown <broonie@linaro.org>
+Cc: stable@vger.kernel.org
+(cherry picked from commit c07a24939f36fb6de522a9726369ea64eee5d98d)
+(cherry picked from commit cfec286ff9f375c2c289072d63cedbb0c7917a48)
+
+Upstream-Status: Pending
+---
+ drivers/regulator/pfuze100-regulator.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c
+index ba67b2c..565a631 100644
+--- a/drivers/regulator/pfuze100-regulator.c
++++ b/drivers/regulator/pfuze100-regulator.c
+@@ -38,7 +38,7 @@
+
+ #define PFUZE100_DEVICEID 0x0
+ #define PFUZE100_REVID 0x3
+-#define PFUZE100_FABID 0x3
++#define PFUZE100_FABID 0x4
+
+ #define PFUZE100_SW1ABVOL 0x20
+ #define PFUZE100_SW1CVOL 0x2e
+--
+2.1.0
+
diff --git a/recipes-kernel/linux/linux-imx-3.10.17/0003-regulator-pfuze100-add-pfuze200-support.patch b/recipes-kernel/linux/linux-imx-3.10.17/0003-regulator-pfuze100-add-pfuze200-support.patch
new file mode 100644
index 0000000..923da0a
--- /dev/null
+++ b/recipes-kernel/linux/linux-imx-3.10.17/0003-regulator-pfuze100-add-pfuze200-support.patch
@@ -0,0 +1,506 @@
+From 08284f19c7cfdf84332c8098204f6e7fad368308 Mon Sep 17 00:00:00 2001
+From: Robin Gong <b38343@freescale.com>
+Date: Tue, 4 Mar 2014 17:40:36 +0800
+Subject: [PATCH 03/10] regulator: pfuze100: add pfuze200 support
+Organization: O.S. Systems Software LTDA.
+
+support pfuze200 chip which remove SW1C and SW4 based on pfuze100.
+
+Signed-off-by: Robin Gong <b38343@freescale.com>
+Signed-off-by: Mark Brown <broonie@linaro.org>
+(cherry picked from commit f2518480c7b744296a5587990a54e3a284d932b8)
+
+Conflicts:
+
+ drivers/regulator/pfuze100-regulator.c
+(cherry picked from commit f9e62732cfb59ff68fed303bbbb3913d2f1002bf)
+
+Upstream-Status: Pending
+---
+ .../devicetree/bindings/regulator/pfuze100.txt | 96 ++++++++++-
+ drivers/regulator/pfuze100-regulator.c | 181 ++++++++++++++++-----
+ include/linux/regulator/pfuze100.h | 14 ++
+ 3 files changed, 245 insertions(+), 46 deletions(-)
+
+diff --git a/Documentation/devicetree/bindings/regulator/pfuze100.txt b/Documentation/devicetree/bindings/regulator/pfuze100.txt
+index fc989b2..34ef5d1 100644
+--- a/Documentation/devicetree/bindings/regulator/pfuze100.txt
++++ b/Documentation/devicetree/bindings/regulator/pfuze100.txt
+@@ -1,7 +1,7 @@
+ PFUZE100 family of regulators
+
+ Required properties:
+-- compatible: "fsl,pfuze100"
++- compatible: "fsl,pfuze100" or "fsl,pfuze200"
+ - reg: I2C slave address
+
+ Required child node:
+@@ -10,11 +10,14 @@ Required child node:
+ Documentation/devicetree/bindings/regulator/regulator.txt.
+
+ The valid names for regulators are:
++ --PFUZE100
+ sw1ab,sw1c,sw2,sw3a,sw3b,sw4,swbst,vsnvs,vrefddr,vgen1~vgen6
++ --PFUZE200
++ sw1ab,sw2,sw3a,sw3b,swbst,vsnvs,vrefddr,vgen1~vgen6
+
+ Each regulator is defined using the standard binding for regulators.
+
+-Example:
++Example 1: PFUZE100
+
+ pmic: pfuze100@08 {
+ compatible = "fsl,pfuze100";
+@@ -113,3 +116,92 @@ Example:
+ };
+ };
+ };
++
++
++Example 2: PFUZE200
++
++ pmic: pfuze200@08 {
++ compatible = "fsl,pfuze200";
++ reg = <0x08>;
++
++ regulators {
++ sw1a_reg: sw1ab {
++ regulator-min-microvolt = <300000>;
++ regulator-max-microvolt = <1875000>;
++ regulator-boot-on;
++ regulator-always-on;
++ regulator-ramp-delay = <6250>;
++ };
++
++ sw2_reg: sw2 {
++ regulator-min-microvolt = <800000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-boot-on;
++ regulator-always-on;
++ };
++
++ sw3a_reg: sw3a {
++ regulator-min-microvolt = <400000>;
++ regulator-max-microvolt = <1975000>;
++ regulator-boot-on;
++ regulator-always-on;
++ };
++
++ sw3b_reg: sw3b {
++ regulator-min-microvolt = <400000>;
++ regulator-max-microvolt = <1975000>;
++ regulator-boot-on;
++ regulator-always-on;
++ };
++
++ swbst_reg: swbst {
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5150000>;
++ };
++
++ snvs_reg: vsnvs {
++ regulator-min-microvolt = <1000000>;
++ regulator-max-microvolt = <3000000>;
++ regulator-boot-on;
++ regulator-always-on;
++ };
++
++ vref_reg: vrefddr {
++ regulator-boot-on;
++ regulator-always-on;
++ };
++
++ vgen1_reg: vgen1 {
++ regulator-min-microvolt = <800000>;
++ regulator-max-microvolt = <1550000>;
++ };
++
++ vgen2_reg: vgen2 {
++ regulator-min-microvolt = <800000>;
++ regulator-max-microvolt = <1550000>;
++ };
++
++ vgen3_reg: vgen3 {
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <3300000>;
++ };
++
++ vgen4_reg: vgen4 {
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-always-on;
++ };
++
++ vgen5_reg: vgen5 {
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-always-on;
++ };
++
++ vgen6_reg: vgen6 {
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-always-on;
++ };
++ };
++ };
+diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c
+index 565a631..35b1de1 100644
+--- a/drivers/regulator/pfuze100-regulator.c
++++ b/drivers/regulator/pfuze100-regulator.c
+@@ -56,6 +56,8 @@
+ #define PFUZE100_VGEN5VOL 0x70
+ #define PFUZE100_VGEN6VOL 0x71
+
++enum chips {PFUZE100, PFUZE200, PFUZE_NUM};
++
+ struct pfuze_regulator {
+ struct regulator_desc desc;
+ unsigned char stby_reg;
+@@ -63,6 +65,7 @@ struct pfuze_regulator {
+ };
+
+ struct pfuze_chip {
++ int chip_id;
+ struct regmap *regmap;
+ struct device *dev;
+ struct pfuze_regulator regulator_descs[PFUZE100_MAX_REGULATOR];
+@@ -77,15 +80,15 @@ static const int pfuze100_vsnvs[] = {
+ 1000000, 1100000, 1200000, 1300000, 1500000, 1800000, 3000000,
+ };
+
+-static const struct i2c_device_id pfuze_device_id[] = {
+- {.name = "pfuze100"},
+- {},
++static const struct i2c_device_id pfuze_device_id[PFUZE_NUM] = {
++ {.name = "pfuze100", .driver_data = PFUZE100},
++ {.name = "pfuze200", .driver_data = PFUZE200},
+ };
+ MODULE_DEVICE_TABLE(i2c, pfuze_device_id);
+
+-static const struct of_device_id pfuze_dt_ids[] = {
+- { .compatible = "fsl,pfuze100" },
+- {},
++static const struct of_device_id pfuze_dt_ids[PFUZE_NUM] = {
++ { .compatible = "fsl,pfuze100", .data = (void *)PFUZE100},
++ { .compatible = "fsl,pfuze200", .data = (void *)PFUZE200},
+ };
+ MODULE_DEVICE_TABLE(of, pfuze_dt_ids);
+
+@@ -139,14 +142,14 @@ static struct regulator_ops pfuze100_swb_regulator_ops = {
+
+ };
+
+-#define PFUZE100_FIXED_REG(_name, base, voltage) \
+- [PFUZE100_ ## _name] = { \
++#define PFUZE100_FIXED_REG(_chip, _name, base, voltage) \
++ [_chip ## _ ## _name] = { \
+ .desc = { \
+ .name = #_name, \
+ .n_voltages = 1, \
+ .ops = &pfuze100_fixed_regulator_ops, \
+ .type = REGULATOR_VOLTAGE, \
+- .id = PFUZE100_ ## _name, \
++ .id = _chip ## _ ## _name, \
+ .owner = THIS_MODULE, \
+ .min_uV = (voltage), \
+ .enable_reg = (base), \
+@@ -154,14 +157,14 @@ static struct regulator_ops pfuze100_swb_regulator_ops = {
+ }, \
+ }
+
+-#define PFUZE100_SW_REG(_name, base, min, max, step) \
+- [PFUZE100_ ## _name] = { \
++#define PFUZE100_SW_REG(_chip, _name, base, min, max, step) \
++ [_chip ## _ ## _name] = { \
+ .desc = { \
+ .name = #_name,\
+ .n_voltages = ((max) - (min)) / (step) + 1, \
+ .ops = &pfuze100_sw_regulator_ops, \
+ .type = REGULATOR_VOLTAGE, \
+- .id = PFUZE100_ ## _name, \
++ .id = _chip ## _ ## _name, \
+ .owner = THIS_MODULE, \
+ .min_uV = (min), \
+ .uV_step = (step), \
+@@ -172,14 +175,14 @@ static struct regulator_ops pfuze100_swb_regulator_ops = {
+ .stby_mask = 0x3f, \
+ }
+
+-#define PFUZE100_SWB_REG(_name, base, mask, voltages) \
+- [PFUZE100_ ## _name] = { \
++#define PFUZE100_SWB_REG(_chip, _name, base, mask, voltages) \
++ [_chip ## _ ## _name] = { \
+ .desc = { \
+ .name = #_name, \
+ .n_voltages = ARRAY_SIZE(voltages), \
+ .ops = &pfuze100_swb_regulator_ops, \
+ .type = REGULATOR_VOLTAGE, \
+- .id = PFUZE100_ ## _name, \
++ .id = _chip ## _ ## _name, \
+ .owner = THIS_MODULE, \
+ .volt_table = voltages, \
+ .vsel_reg = (base), \
+@@ -187,14 +190,14 @@ static struct regulator_ops pfuze100_swb_regulator_ops = {
+ }, \
+ }
+
+-#define PFUZE100_VGEN_REG(_name, base, min, max, step) \
+- [PFUZE100_ ## _name] = { \
++#define PFUZE100_VGEN_REG(_chip, _name, base, min, max, step) \
++ [_chip ## _ ## _name] = { \
+ .desc = { \
+ .name = #_name, \
+ .n_voltages = ((max) - (min)) / (step) + 1, \
+ .ops = &pfuze100_ldo_regulator_ops, \
+ .type = REGULATOR_VOLTAGE, \
+- .id = PFUZE100_ ## _name, \
++ .id = _chip ## _ ## _name, \
+ .owner = THIS_MODULE, \
+ .min_uV = (min), \
+ .uV_step = (step), \
+@@ -207,25 +210,45 @@ static struct regulator_ops pfuze100_swb_regulator_ops = {
+ .stby_mask = 0x20, \
+ }
+
++/* PFUZE100 */
+ static struct pfuze_regulator pfuze100_regulators[] = {
+- PFUZE100_SW_REG(SW1AB, PFUZE100_SW1ABVOL, 300000, 1875000, 25000),
+- PFUZE100_SW_REG(SW1C, PFUZE100_SW1CVOL, 300000, 1875000, 25000),
+- PFUZE100_SW_REG(SW2, PFUZE100_SW2VOL, 400000, 1975000, 25000),
+- PFUZE100_SW_REG(SW3A, PFUZE100_SW3AVOL, 400000, 1975000, 25000),
+- PFUZE100_SW_REG(SW3B, PFUZE100_SW3BVOL, 400000, 1975000, 25000),
+- PFUZE100_SW_REG(SW4, PFUZE100_SW4VOL, 400000, 1975000, 25000),
+- PFUZE100_SWB_REG(SWBST, PFUZE100_SWBSTCON1, 0x3 , pfuze100_swbst),
+- PFUZE100_SWB_REG(VSNVS, PFUZE100_VSNVSVOL, 0x7, pfuze100_vsnvs),
+- PFUZE100_FIXED_REG(VREFDDR, PFUZE100_VREFDDRCON, 750000),
+- PFUZE100_VGEN_REG(VGEN1, PFUZE100_VGEN1VOL, 800000, 1550000, 50000),
+- PFUZE100_VGEN_REG(VGEN2, PFUZE100_VGEN2VOL, 800000, 1550000, 50000),
+- PFUZE100_VGEN_REG(VGEN3, PFUZE100_VGEN3VOL, 1800000, 3300000, 100000),
+- PFUZE100_VGEN_REG(VGEN4, PFUZE100_VGEN4VOL, 1800000, 3300000, 100000),
+- PFUZE100_VGEN_REG(VGEN5, PFUZE100_VGEN5VOL, 1800000, 3300000, 100000),
+- PFUZE100_VGEN_REG(VGEN6, PFUZE100_VGEN6VOL, 1800000, 3300000, 100000),
++ PFUZE100_SW_REG(PFUZE100, SW1AB, PFUZE100_SW1ABVOL, 300000, 1875000, 25000),
++ PFUZE100_SW_REG(PFUZE100, SW1C, PFUZE100_SW1CVOL, 300000, 1875000, 25000),
++ PFUZE100_SW_REG(PFUZE100, SW2, PFUZE100_SW2VOL, 400000, 1975000, 25000),
++ PFUZE100_SW_REG(PFUZE100, SW3A, PFUZE100_SW3AVOL, 400000, 1975000, 25000),
++ PFUZE100_SW_REG(PFUZE100, SW3B, PFUZE100_SW3BVOL, 400000, 1975000, 25000),
++ PFUZE100_SW_REG(PFUZE100, SW4, PFUZE100_SW4VOL, 400000, 1975000, 25000),
++ PFUZE100_SWB_REG(PFUZE100, SWBST, PFUZE100_SWBSTCON1, 0x3 , pfuze100_swbst),
++ PFUZE100_SWB_REG(PFUZE100, VSNVS, PFUZE100_VSNVSVOL, 0x7, pfuze100_vsnvs),
++ PFUZE100_FIXED_REG(PFUZE100, VREFDDR, PFUZE100_VREFDDRCON, 750000),
++ PFUZE100_VGEN_REG(PFUZE100, VGEN1, PFUZE100_VGEN1VOL, 800000, 1550000, 50000),
++ PFUZE100_VGEN_REG(PFUZE100, VGEN2, PFUZE100_VGEN2VOL, 800000, 1550000, 50000),
++ PFUZE100_VGEN_REG(PFUZE100, VGEN3, PFUZE100_VGEN3VOL, 1800000, 3300000, 100000),
++ PFUZE100_VGEN_REG(PFUZE100, VGEN4, PFUZE100_VGEN4VOL, 1800000, 3300000, 100000),
++ PFUZE100_VGEN_REG(PFUZE100, VGEN5, PFUZE100_VGEN5VOL, 1800000, 3300000, 100000),
++ PFUZE100_VGEN_REG(PFUZE100, VGEN6, PFUZE100_VGEN6VOL, 1800000, 3300000, 100000),
++};
++
++static struct pfuze_regulator pfuze200_regulators[] = {
++ PFUZE100_SW_REG(PFUZE200, SW1AB, PFUZE100_SW1ABVOL, 300000, 1875000, 25000),
++ PFUZE100_SW_REG(PFUZE200, SW2, PFUZE100_SW2VOL, 400000, 1975000, 25000),
++ PFUZE100_SW_REG(PFUZE200, SW3A, PFUZE100_SW3AVOL, 400000, 1975000, 25000),
++ PFUZE100_SW_REG(PFUZE200, SW3B, PFUZE100_SW3BVOL, 400000, 1975000, 25000),
++ PFUZE100_SWB_REG(PFUZE200, SWBST, PFUZE100_SWBSTCON1, 0x3 , pfuze100_swbst),
++ PFUZE100_SWB_REG(PFUZE200, VSNVS, PFUZE100_VSNVSVOL, 0x7, pfuze100_vsnvs),
++ PFUZE100_FIXED_REG(PFUZE200, VREFDDR, PFUZE100_VREFDDRCON, 750000),
++ PFUZE100_VGEN_REG(PFUZE200, VGEN1, PFUZE100_VGEN1VOL, 800000, 1550000, 50000),
++ PFUZE100_VGEN_REG(PFUZE200, VGEN2, PFUZE100_VGEN2VOL, 800000, 1550000, 50000),
++ PFUZE100_VGEN_REG(PFUZE200, VGEN3, PFUZE100_VGEN3VOL, 1800000, 3300000, 100000),
++ PFUZE100_VGEN_REG(PFUZE200, VGEN4, PFUZE100_VGEN4VOL, 1800000, 3300000, 100000),
++ PFUZE100_VGEN_REG(PFUZE200, VGEN5, PFUZE100_VGEN5VOL, 1800000, 3300000, 100000),
++ PFUZE100_VGEN_REG(PFUZE200, VGEN6, PFUZE100_VGEN6VOL, 1800000, 3300000, 100000),
+ };
+
++static struct pfuze_regulator *pfuze_regulators;
++
+ #ifdef CONFIG_OF
++/* PFUZE100 */
+ static struct of_regulator_match pfuze100_matches[] = {
+ { .name = "sw1ab", },
+ { .name = "sw1c", },
+@@ -244,6 +267,26 @@ static struct of_regulator_match pfuze100_matches[] = {
+ { .name = "vgen6", },
+ };
+
++/* PFUZE200 */
++static struct of_regulator_match pfuze200_matches[] = {
++
++ { .name = "sw1ab", },
++ { .name = "sw2", },
++ { .name = "sw3a", },
++ { .name = "sw3b", },
++ { .name = "swbst", },
++ { .name = "vsnvs", },
++ { .name = "vrefddr", },
++ { .name = "vgen1", },
++ { .name = "vgen2", },
++ { .name = "vgen3", },
++ { .name = "vgen4", },
++ { .name = "vgen5", },
++ { .name = "vgen6", },
++};
++
++static struct of_regulator_match *pfuze_matches;
++
+ static int pfuze_parse_regulators_dt(struct pfuze_chip *chip)
+ {
+ struct device *dev = chip->dev;
+@@ -260,8 +303,20 @@ static int pfuze_parse_regulators_dt(struct pfuze_chip *chip)
+ return -EINVAL;
+ }
+
+- ret = of_regulator_match(dev, parent, pfuze100_matches,
+- ARRAY_SIZE(pfuze100_matches));
++ switch (chip->chip_id) {
++ case PFUZE200:
++ pfuze_matches = pfuze200_matches;
++ ret = of_regulator_match(dev, parent, pfuze200_matches,
++ ARRAY_SIZE(pfuze200_matches));
++ break;
++
++ case PFUZE100:
++ default:
++ pfuze_matches = pfuze100_matches;
++ ret = of_regulator_match(dev, parent, pfuze100_matches,
++ ARRAY_SIZE(pfuze100_matches));
++ break;
++ }
+
+ of_node_put(parent);
+ if (ret < 0) {
+@@ -275,12 +330,12 @@ static int pfuze_parse_regulators_dt(struct pfuze_chip *chip)
+
+ static inline struct regulator_init_data *match_init_data(int index)
+ {
+- return pfuze100_matches[index].init_data;
++ return pfuze_matches[index].init_data;
+ }
+
+ static inline struct device_node *match_of_node(int index)
+ {
+- return pfuze100_matches[index].of_node;
++ return pfuze_matches[index].of_node;
+ }
+ #else
+ static int pfuze_parse_regulators_dt(struct pfuze_chip *chip)
+@@ -308,7 +363,8 @@ static int pfuze_identify(struct pfuze_chip *pfuze_chip)
+ if (ret)
+ return ret;
+
+- if (value & 0x0f) {
++ if ((value & 0x0f) != pfuze_chip->chip_id) {
++ /* device id NOT match with your setting */
+ dev_warn(pfuze_chip->dev, "Illegal ID: %x\n", value);
+ return -ENODEV;
+ }
+@@ -344,17 +400,31 @@ static int pfuze100_regulator_probe(struct i2c_client *client,
+ dev_get_platdata(&client->dev);
+ struct regulator_config config = { };
+ int i, ret;
++ const struct of_device_id *match;
++ u32 regulator_num;
++ u32 sw_check_start, sw_check_end;
+
+ pfuze_chip = devm_kzalloc(&client->dev, sizeof(*pfuze_chip),
+ GFP_KERNEL);
+ if (!pfuze_chip)
+ return -ENOMEM;
+
+- i2c_set_clientdata(client, pfuze_chip);
+-
+- memcpy(pfuze_chip->regulator_descs, pfuze100_regulators,
+- sizeof(pfuze_chip->regulator_descs));
++ if (client->dev.of_node) {
++ match = of_match_device(of_match_ptr(pfuze_dt_ids),
++ &client->dev);
++ if (!match) {
++ dev_err(&client->dev, "Error: No device match found\n");
++ return -ENODEV;
++ }
++ pfuze_chip->chip_id = (int)(long)match->data;
++ } else if (id) {
++ pfuze_chip->chip_id = id->driver_data;
++ } else {
++ dev_err(&client->dev, "No dts match or id table match found\n");
++ return -ENODEV;
++ }
+
++ i2c_set_clientdata(client, pfuze_chip);
+ pfuze_chip->dev = &client->dev;
+
+ pfuze_chip->regmap = devm_regmap_init_i2c(client, &pfuze_regmap_config);
+@@ -371,11 +441,34 @@ static int pfuze100_regulator_probe(struct i2c_client *client,
+ return ret;
+ }
+
++ /* use the right regulators after identify the right device */
++ switch (pfuze_chip->chip_id) {
++ case PFUZE200:
++ pfuze_regulators = pfuze200_regulators;
++ regulator_num = ARRAY_SIZE(pfuze200_regulators);
++ sw_check_start = PFUZE200_SW2;
++ sw_check_end = PFUZE200_SW3B;
++ break;
++
++ case PFUZE100:
++ default:
++ pfuze_regulators = pfuze100_regulators;
++ regulator_num = ARRAY_SIZE(pfuze100_regulators);
++ sw_check_start = PFUZE100_SW2;
++ sw_check_end = PFUZE100_SW4;
++ break;
++ }
++ dev_info(&client->dev, "pfuze%s found.\n",
++ (pfuze_chip->chip_id == PFUZE100) ? "100" : "200");
++
++ memcpy(pfuze_chip->regulator_descs, pfuze_regulators,
++ sizeof(pfuze_chip->regulator_descs));
++
+ ret = pfuze_parse_regulators_dt(pfuze_chip);
+ if (ret)
+ return ret;
+
+- for (i = 0; i < PFUZE100_MAX_REGULATOR; i++) {
++ for (i = 0; i < regulator_num; i++) {
+ struct regulator_init_data *init_data;
+ struct regulator_desc *desc;
+ int val;
+@@ -388,7 +481,7 @@ static int pfuze100_regulator_probe(struct i2c_client *client,
+ init_data = match_init_data(i);
+
+ /* SW2~SW4 high bit check and modify the voltage value table */
+- if (i > PFUZE100_SW1C && i < PFUZE100_SWBST) {
++ if (i >= sw_check_start && i <= sw_check_end) {
+ regmap_read(pfuze_chip->regmap, desc->vsel_reg, &val);
+ if (val & 0x40) {
+ desc->min_uV = 800000;
+diff --git a/include/linux/regulator/pfuze100.h b/include/linux/regulator/pfuze100.h
+index 65d550b..364f7a7 100644
+--- a/include/linux/regulator/pfuze100.h
++++ b/include/linux/regulator/pfuze100.h
+@@ -35,6 +35,20 @@
+ #define PFUZE100_VGEN6 14
+ #define PFUZE100_MAX_REGULATOR 15
+
++#define PFUZE200_SW1AB 0
++#define PFUZE200_SW2 1
++#define PFUZE200_SW3A 2
++#define PFUZE200_SW3B 3
++#define PFUZE200_SWBST 4
++#define PFUZE200_VSNVS 5
++#define PFUZE200_VREFDDR 6
++#define PFUZE200_VGEN1 7
++#define PFUZE200_VGEN2 8
++#define PFUZE200_VGEN3 9
++#define PFUZE200_VGEN4 10
++#define PFUZE200_VGEN5 11
++#define PFUZE200_VGEN6 12
++
+ struct regulator_init_data;
+
+ struct pfuze_regulator_platform_data {
+--
+2.1.0
+
diff --git a/recipes-kernel/linux/linux-imx-3.10.17/0004-regulator-pfuze100-Add-terminate-entry-for-i2c-of-_d.patch b/recipes-kernel/linux/linux-imx-3.10.17/0004-regulator-pfuze100-Add-terminate-entry-for-i2c-of-_d.patch
new file mode 100644
index 0000000..c7381e3
--- /dev/null
+++ b/recipes-kernel/linux/linux-imx-3.10.17/0004-regulator-pfuze100-Add-terminate-entry-for-i2c-of-_d.patch
@@ -0,0 +1,61 @@
+From fdbdb66994db6b896a5a6464b9c1efd7abfbfdb9 Mon Sep 17 00:00:00 2001
+From: Axel Lin <axel.lin@ingics.com>
+Date: Tue, 4 Mar 2014 18:20:14 +0800
+Subject: [PATCH 04/10] regulator: pfuze100: Add terminate entry for
+ [i2c|of]_device_id tables
+Organization: O.S. Systems Software LTDA.
+
+Also remove PFUZE_NUM to avoid below build warnings:
+
+ CC [M] drivers/regulator/pfuze100-regulator.o
+drivers/regulator/pfuze100-regulator.c:86:2: warning: excess elements in array initializer [enabled by default]
+drivers/regulator/pfuze100-regulator.c:86:2: warning: (near initialization for 'pfuze_device_id') [enabled by default]
+drivers/regulator/pfuze100-regulator.c:93:2: warning: excess elements in array initializer [enabled by default]
+drivers/regulator/pfuze100-regulator.c:93:2: warning: (near initialization for 'pfuze_dt_ids') [enabled by default]
+
+Signed-off-by: Axel Lin <axel.lin@ingics.com>
+Signed-off-by: Mark Brown <broonie@linaro.org>
+(cherry picked from commit e6c4c3378d82c5eeb136ed06b1a23651bcdaf739)
+(cherry picked from commit 12c7dd7c396378fd6dc907903a4ae540a75b31f5)
+
+Upstream-Status: Pending
+---
+ drivers/regulator/pfuze100-regulator.c | 8 +++++---
+ 1 file changed, 5 insertions(+), 3 deletions(-)
+
+diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c
+index 35b1de1..0f4924e0 100644
+--- a/drivers/regulator/pfuze100-regulator.c
++++ b/drivers/regulator/pfuze100-regulator.c
+@@ -56,7 +56,7 @@
+ #define PFUZE100_VGEN5VOL 0x70
+ #define PFUZE100_VGEN6VOL 0x71
+
+-enum chips {PFUZE100, PFUZE200, PFUZE_NUM};
++enum chips { PFUZE100, PFUZE200 };
+
+ struct pfuze_regulator {
+ struct regulator_desc desc;
+@@ -80,15 +80,17 @@ static const int pfuze100_vsnvs[] = {
+ 1000000, 1100000, 1200000, 1300000, 1500000, 1800000, 3000000,
+ };
+
+-static const struct i2c_device_id pfuze_device_id[PFUZE_NUM] = {
++static const struct i2c_device_id pfuze_device_id[] = {
+ {.name = "pfuze100", .driver_data = PFUZE100},
+ {.name = "pfuze200", .driver_data = PFUZE200},
++ { }
+ };
+ MODULE_DEVICE_TABLE(i2c, pfuze_device_id);
+
+-static const struct of_device_id pfuze_dt_ids[PFUZE_NUM] = {
++static const struct of_device_id pfuze_dt_ids[] = {
+ { .compatible = "fsl,pfuze100", .data = (void *)PFUZE100},
+ { .compatible = "fsl,pfuze200", .data = (void *)PFUZE200},
++ { }
+ };
+ MODULE_DEVICE_TABLE(of, pfuze_dt_ids);
+
+--
+2.1.0
+
diff --git a/recipes-kernel/linux/linux-imx-3.10.17/0005-regulator-pfuze100-Add-PFUZE200-support-to-Kconfig-a.patch b/recipes-kernel/linux/linux-imx-3.10.17/0005-regulator-pfuze100-Add-PFUZE200-support-to-Kconfig-a.patch
new file mode 100644
index 0000000..7fcc79d
--- /dev/null
+++ b/recipes-kernel/linux/linux-imx-3.10.17/0005-regulator-pfuze100-Add-PFUZE200-support-to-Kconfig-a.patch
@@ -0,0 +1,56 @@
+From 2610dd3d4f0f167b77c4ce24e1756f7434a17cde Mon Sep 17 00:00:00 2001
+From: Axel Lin <axel.lin@ingics.com>
+Date: Wed, 5 Mar 2014 18:02:43 +0800
+Subject: [PATCH 05/10] regulator: pfuze100: Add PFUZE200 support to Kconfig
+ and module description
+Organization: O.S. Systems Software LTDA.
+
+Signed-off-by: Axel Lin <axel.lin@ingics.com>
+Acked-by: Robin Gong <b38343@freescale.com>
+Signed-off-by: Mark Brown <broonie@linaro.org>
+(cherry picked from commit 2cee2121db44cfeee206d0854bedd52344eea444)
+
+Signed-off-by: Robin Gong <b38343@freescale.com>
+(cherry picked from commit 88236aaba4ed9b89a7873b30fc1ca9cdcb6b407d)
+
+Upstream-Status: Pending
+---
+ drivers/regulator/Kconfig | 6 +++---
+ drivers/regulator/pfuze100-regulator.c | 2 +-
+ 2 files changed, 4 insertions(+), 4 deletions(-)
+
+diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
+index 1339404..5b64f2c 100644
+--- a/drivers/regulator/Kconfig
++++ b/drivers/regulator/Kconfig
+@@ -305,12 +305,12 @@ config REGULATOR_PCF50633
+ on PCF50633
+
+ config REGULATOR_PFUZE100
+- tristate "Support regulators on Freescale PFUZE100 PMIC"
++ tristate "Freescale PFUZE100/PFUZE200 regulator driver"
+ depends on I2C
+ select REGMAP_I2C
+ help
+- Say y here to support the regulators found on the Freescale PFUZE100
+- PMIC.
++ Say y here to support the regulators found on the Freescale
++ PFUZE100/PFUZE200 PMIC.
+
+ config REGULATOR_RC5T583
+ tristate "RICOH RC5T583 Power regulators"
+diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c
+index 0f4924e0..21114f7 100644
+--- a/drivers/regulator/pfuze100-regulator.c
++++ b/drivers/regulator/pfuze100-regulator.c
+@@ -535,6 +535,6 @@ static struct i2c_driver pfuze_driver = {
+ module_i2c_driver(pfuze_driver);
+
+ MODULE_AUTHOR("Robin Gong <b38343@freescale.com>");
+-MODULE_DESCRIPTION("Regulator Driver for Freescale PFUZE100 PMIC");
++MODULE_DESCRIPTION("Regulator Driver for Freescale PFUZE100/PFUZE200 PMIC");
+ MODULE_LICENSE("GPL v2");
+ MODULE_ALIAS("i2c:pfuze100-regulator");
+--
+2.1.0
+
diff --git a/recipes-kernel/linux/linux-imx-3.10.17/0006-regulator-pfuze100-Use-of_get_child_by_name.patch b/recipes-kernel/linux/linux-imx-3.10.17/0006-regulator-pfuze100-Use-of_get_child_by_name.patch
new file mode 100644
index 0000000..21b2e0c
--- /dev/null
+++ b/recipes-kernel/linux/linux-imx-3.10.17/0006-regulator-pfuze100-Use-of_get_child_by_name.patch
@@ -0,0 +1,34 @@
+From cef8d38fc22ed27e26c8b3d8594c152b6c542253 Mon Sep 17 00:00:00 2001
+From: Sachin Kamat <sachin.kamat@linaro.org>
+Date: Fri, 14 Feb 2014 17:20:00 +0530
+Subject: [PATCH 06/10] regulator: pfuze100: Use of_get_child_by_name
+Organization: O.S. Systems Software LTDA.
+
+of_find_node_by_name walks the allnodes list, and can thus walk
+outside of the parent node. Use of_get_child_by_name instead.
+
+Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
+Signed-off-by: Mark Brown <broonie@linaro.org>
+(cherry picked from commit 4d286178d55cc5811d50750a44eb729252adef11)
+
+Upstream-Status: Pending
+---
+ drivers/regulator/pfuze100-regulator.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c
+index 21114f7..15059c74 100644
+--- a/drivers/regulator/pfuze100-regulator.c
++++ b/drivers/regulator/pfuze100-regulator.c
+@@ -299,7 +299,7 @@ static int pfuze_parse_regulators_dt(struct pfuze_chip *chip)
+ if (!np)
+ return 0;
+
+- parent = of_find_node_by_name(np, "regulators");
++ parent = of_get_child_by_name(np, "regulators");
+ if (!parent) {
+ dev_err(dev, "regulators node not found\n");
+ return -EINVAL;
+--
+2.1.0
+
diff --git a/recipes-kernel/linux/linux-imx-3.10.17/0007-pfuze100-regulator-Fix-of_node_get-parameter.patch b/recipes-kernel/linux/linux-imx-3.10.17/0007-pfuze100-regulator-Fix-of_node_get-parameter.patch
new file mode 100644
index 0000000..d077858
--- /dev/null
+++ b/recipes-kernel/linux/linux-imx-3.10.17/0007-pfuze100-regulator-Fix-of_node_get-parameter.patch
@@ -0,0 +1,44 @@
+From cc1f086131aa802abc38428a5a690eb5f35c8225 Mon Sep 17 00:00:00 2001
+From: Fabio Estevam <fabio.estevam@freescale.com>
+Date: Tue, 18 Feb 2014 23:46:14 -0300
+Subject: [PATCH 07/10] pfuze100-regulator: Fix of_node_get() parameter
+Organization: O.S. Systems Software LTDA.
+
+Since commit d7857c42 (regulator: pfuze100: Use of_get_child_by_name) we get
+the following probe failure:
+
+pfuze100-regulator 1-0008: Full layer: 1, Metal layer: 0
+pfuze100-regulator 1-0008: FAB: 0, FIN: 0
+pfuze100-regulator 1-0008: regulators node not found
+pfuze100-regulator: probe of 1-0008 failed with error -22
+
+Now that of_get_child_by_name() is used we should adjust the device_node pointer
+'np' to not get the parent node anymore.
+
+Suggested-by: Shawn Guo <shawn.guo@linaro.org>
+Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
+Acked-by: Sachin Kamat <sachin.kamat@linaro.org>
+Signed-off-by: Mark Brown <broonie@linaro.org>
+(cherry picked from commit 0780208ff201feb45e12ebecb39ecac4740b1244)
+
+Upstream-Status: Pending
+---
+ drivers/regulator/pfuze100-regulator.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c
+index 15059c74..b9c1b9a 100644
+--- a/drivers/regulator/pfuze100-regulator.c
++++ b/drivers/regulator/pfuze100-regulator.c
+@@ -295,7 +295,7 @@ static int pfuze_parse_regulators_dt(struct pfuze_chip *chip)
+ struct device_node *np, *parent;
+ int ret;
+
+- np = of_node_get(dev->parent->of_node);
++ np = of_node_get(dev->of_node);
+ if (!np)
+ return 0;
+
+--
+2.1.0
+
diff --git a/recipes-kernel/linux/linux-imx-3.10.17/0008-ENGR00301078-1-ARM-dts-imx6dl-sabresd-add-support-fo.patch b/recipes-kernel/linux/linux-imx-3.10.17/0008-ENGR00301078-1-ARM-dts-imx6dl-sabresd-add-support-fo.patch
new file mode 100644
index 0000000..f1e88d4
--- /dev/null
+++ b/recipes-kernel/linux/linux-imx-3.10.17/0008-ENGR00301078-1-ARM-dts-imx6dl-sabresd-add-support-fo.patch
@@ -0,0 +1,752 @@
+From 37e501e8c4e1f1511e017aa0a7def38895a47fa6 Mon Sep 17 00:00:00 2001
+From: Robin Gong <b38343@freescale.com>
+Date: Thu, 6 Mar 2014 18:59:30 +0800
+Subject: [PATCH 08/10] ENGR00301078-1: ARM: dts: imx6dl-sabresd: add support
+ for pfuze200 on mx6dl-sabresd
+Organization: O.S. Systems Software LTDA.
+
+move pmic device node from imx6qdl-sabresd.dtsi to up-level, and add
+another layer on imx6dl-sabresd to diff pfuze100 or pfuze200. Meanwhile
+only work in ldo-enable mode if using pfuze200,since 'SW1C' switch
+regulator is cut for cost-down which means VDDARM_IN and VDDSOC_IN have
+to share the same switch regulator
+
+Signed-off-by: Robin Gong <b38343@freescale.com>
+(cherry picked from commit 32e4e161b087bfdcea74bd80f0b24c341092c96b)
+
+Upstream-Status: Pending
+---
+ arch/arm/boot/dts/Makefile | 1 +
+ arch/arm/boot/dts/imx6dl-sabresd-common.dtsi | 130 ++++++++++++++++++++
+ arch/arm/boot/dts/imx6dl-sabresd-pf200.dts | 126 +++++++++++++++++++
+ arch/arm/boot/dts/imx6dl-sabresd.dts | 175 ++++++++++++---------------
+ arch/arm/boot/dts/imx6q-sabresd.dts | 101 ++++++++++++++++
+ arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 99 ---------------
+ 6 files changed, 435 insertions(+), 197 deletions(-)
+ create mode 100644 arch/arm/boot/dts/imx6dl-sabresd-common.dtsi
+ create mode 100644 arch/arm/boot/dts/imx6dl-sabresd-pf200.dts
+
+diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
+index f43b68b..c744cda 100644
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -120,6 +120,7 @@ dtb-$(CONFIG_ARCH_MXC) += \
+ imx6dl-sabresd.dtb \
+ imx6dl-sabresd-hdcp.dtb \
+ imx6dl-sabresd-ldo.dtb \
++ imx6dl-sabresd-pf200.dtb \
+ imx6dl-wandboard.dtb \
+ imx6q-arm2.dtb \
+ imx6q-sabreauto.dtb \
+diff --git a/arch/arm/boot/dts/imx6dl-sabresd-common.dtsi b/arch/arm/boot/dts/imx6dl-sabresd-common.dtsi
+new file mode 100644
+index 0000000..2a07534
+--- /dev/null
++++ b/arch/arm/boot/dts/imx6dl-sabresd-common.dtsi
+@@ -0,0 +1,130 @@
++/*
++ * Copyright (C) 2014 Freescale Semiconductor, Inc.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++&battery {
++ offset-charger = <1485>;
++ offset-discharger = <1464>;
++ offset-usb-charger = <1285>;
++};
++
++&i2c3 {
++ max17135@48 {
++ compatible = "maxim,max17135";
++ reg = <0x48>;
++ vneg_pwrup = <1>;
++ gvee_pwrup = <1>;
++ vpos_pwrup = <2>;
++ gvdd_pwrup = <1>;
++ gvdd_pwrdn = <1>;
++ vpos_pwrdn = <2>;
++ gvee_pwrdn = <1>;
++ vneg_pwrdn = <1>;
++ SENSOR-supply = <&reg_sensor>;
++ gpio_pmic_pwrgood = <&gpio2 21 0>;
++ gpio_pmic_vcom_ctrl = <&gpio3 17 0>;
++ gpio_pmic_wakeup = <&gpio3 20 0>;
++ gpio_pmic_v3p3 = <&gpio2 20 0>;
++ gpio_pmic_intr = <&gpio2 25 0>;
++
++ regulators {
++ DISPLAY_reg: DISPLAY {
++ regulator-name = "DISPLAY";
++ };
++
++ GVDD_reg: GVDD {
++ /* 20v */
++ regulator-name = "GVDD";
++ };
++
++ GVEE_reg: GVEE {
++ /* -22v */
++ regulator-name = "GVEE";
++ };
++
++ HVINN_reg: HVINN {
++ /* -22v */
++ regulator-name = "HVINN";
++ };
++
++ HVINP_reg: HVINP {
++ /* 20v */
++ regulator-name = "HVINP";
++ };
++
++ VCOM_reg: VCOM {
++ regulator-name = "VCOM";
++ /* 2's-compliment, -4325000 */
++ regulator-min-microvolt = <0xffbe0178>;
++ /* 2's-compliment, -500000 */
++ regulator-max-microvolt = <0xfff85ee0>;
++ };
++
++ VNEG_reg: VNEG {
++ /* -15v */
++ regulator-name = "VNEG";
++ };
++
++ VPOS_reg: VPOS {
++ /* 15v */
++ regulator-name = "VPOS";
++ };
++
++ V3P3_reg: V3P3 {
++ regulator-name = "V3P3";
++ };
++ };
++ };
++};
++
++&iomuxc {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_hog_1>, <&pinctrl_hog_2>;
++
++ hog {
++ pinctrl_hog_2: hoggrp-2 {
++ fsl,pins = <
++ /* MAX17135 */
++ MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x80000000
++ MX6QDL_PAD_EIM_D17__GPIO3_IO17 0x80000000
++ MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x80000000
++ MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x80000000
++ MX6QDL_PAD_EIM_OE__GPIO2_IO25 0x80000000
++ /* elan touch */
++ MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x80000000
++ MX6QDL_PAD_EIM_DA8__GPIO3_IO08 0x80000000
++ MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x170b0
++ >;
++ };
++ };
++};
++
++&epdc {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_epdc_0>;
++ V3P3-supply = <&V3P3_reg>;
++ VCOM-supply = <&VCOM_reg>;
++ DISPLAY-supply = <&DISPLAY_reg>;
++ status = "okay";
++};
++
++&ldb {
++ ipu_id = <0>;
++ sec_ipu_id = <0>;
++};
++
++&mxcfb1 {
++ status = "okay";
++};
++
++&mxcfb2 {
++ status = "okay";
++};
++
++&pxp {
++ status = "okay";
++};
+diff --git a/arch/arm/boot/dts/imx6dl-sabresd-pf200.dts b/arch/arm/boot/dts/imx6dl-sabresd-pf200.dts
+new file mode 100644
+index 0000000..499f7d3
+--- /dev/null
++++ b/arch/arm/boot/dts/imx6dl-sabresd-pf200.dts
+@@ -0,0 +1,126 @@
++/*
++ * Copyright (C) 2014 Freescale Semiconductor, Inc.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++/dts-v1/;
++
++#include "imx6dl.dtsi"
++#include "imx6qdl-sabresd.dtsi"
++#include "imx6dl-sabresd-common.dtsi"
++
++/ {
++ model = "Freescale i.MX6 DualLite SABRE Smart Device Board(PFUZE200)";
++ compatible = "fsl,imx6dl-sabresd", "fsl,imx6dl";
++};
++
++&cpu0 {
++ arm-supply = <&reg_arm>;
++ soc-supply = <&reg_soc>;
++ pu-supply = <&reg_pu>; /* use pu_dummy if VDDSOC share with VDDPU */
++};
++
++&gpc {
++ fsl,ldo-bypass = <0>; /* use ldo-bypass, u-boot will check it and configure */
++ fsl,wdog-reset = <1>; /* watchdog select of reset source */
++ pu-supply = <&reg_pu>; /* ldo-bypass:use pu_dummy if VDDSOC share with VDDPU */
++};
++
++&gpu {
++ pu-supply = <&reg_pu>; /* ldo-bypass:use pu_dummy if VDDSOC share with VDDPU */
++};
++
++&vpu {
++ pu-supply = <&reg_pu>; /* ldo-bypass:use pu_dummy if VDDSOC share with VDDPU */
++};
++
++&i2c2 {
++ pmic: pfuze200@08 {
++ compatible = "fsl,pfuze200";
++ reg = <0x08>;
++
++ regulators {
++ sw1a_reg: sw1ab {
++ regulator-min-microvolt = <300000>;
++ regulator-max-microvolt = <1875000>;
++ regulator-boot-on;
++ regulator-always-on;
++ regulator-ramp-delay = <6250>;
++ };
++
++ sw2_reg: sw2 {
++ regulator-min-microvolt = <800000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-boot-on;
++ regulator-always-on;
++ };
++
++ sw3a_reg: sw3a {
++ regulator-min-microvolt = <400000>;
++ regulator-max-microvolt = <1975000>;
++ regulator-boot-on;
++ regulator-always-on;
++ };
++
++ sw3b_reg: sw3b {
++ regulator-min-microvolt = <400000>;
++ regulator-max-microvolt = <1975000>;
++ regulator-boot-on;
++ regulator-always-on;
++ };
++
++ swbst_reg: swbst {
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5150000>;
++ };
++
++ snvs_reg: vsnvs {
++ regulator-min-microvolt = <1000000>;
++ regulator-max-microvolt = <3000000>;
++ regulator-boot-on;
++ regulator-always-on;
++ };
++
++ vref_reg: vrefddr {
++ regulator-boot-on;
++ regulator-always-on;
++ };
++
++ vgen1_reg: vgen1 {
++ regulator-min-microvolt = <800000>;
++ regulator-max-microvolt = <1550000>;
++ };
++
++ vgen2_reg: vgen2 {
++ regulator-min-microvolt = <800000>;
++ regulator-max-microvolt = <1550000>;
++ };
++
++ vgen3_reg: vgen3 {
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <3300000>;
++ };
++
++ vgen4_reg: vgen4 {
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-always-on;
++ };
++
++ vgen5_reg: vgen5 {
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-always-on;
++ };
++
++ vgen6_reg: vgen6 {
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-always-on;
++ };
++ };
++ };
++};
+diff --git a/arch/arm/boot/dts/imx6dl-sabresd.dts b/arch/arm/boot/dts/imx6dl-sabresd.dts
+index 5713c71..b4c738d 100644
+--- a/arch/arm/boot/dts/imx6dl-sabresd.dts
++++ b/arch/arm/boot/dts/imx6dl-sabresd.dts
+@@ -1,5 +1,5 @@
+ /*
+- * Copyright (C) 2013 Freescale Semiconductor, Inc.
++ * Copyright (C) 2013-2014 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+@@ -10,131 +10,110 @@
+
+ #include "imx6dl.dtsi"
+ #include "imx6qdl-sabresd.dtsi"
++#include "imx6dl-sabresd-common.dtsi"
+
+ / {
+- model = "Freescale i.MX6 DualLite SABRE Smart Device Board";
++ model = "Freescale i.MX6 DualLite SABRE Smart Device Board(PFUZE100)";
+ compatible = "fsl,imx6dl-sabresd", "fsl,imx6dl";
+ };
+
+-&battery {
+- offset-charger = <1485>;
+- offset-discharger = <1464>;
+- offset-usb-charger = <1285>;
+-};
+-
+-&i2c3 {
+- max17135@48 {
+- compatible = "maxim,max17135";
+- reg = <0x48>;
+- vneg_pwrup = <1>;
+- gvee_pwrup = <1>;
+- vpos_pwrup = <2>;
+- gvdd_pwrup = <1>;
+- gvdd_pwrdn = <1>;
+- vpos_pwrdn = <2>;
+- gvee_pwrdn = <1>;
+- vneg_pwrdn = <1>;
+- SENSOR-supply = <&reg_sensor>;
+- gpio_pmic_pwrgood = <&gpio2 21 0>;
+- gpio_pmic_vcom_ctrl = <&gpio3 17 0>;
+- gpio_pmic_wakeup = <&gpio3 20 0>;
+- gpio_pmic_v3p3 = <&gpio2 20 0>;
+- gpio_pmic_intr = <&gpio2 25 0>;
++&i2c2 {
++ pmic: pfuze100@08 {
++ compatible = "fsl,pfuze100";
++ reg = <0x08>;
+
+ regulators {
+- DISPLAY_reg: DISPLAY {
+- regulator-name = "DISPLAY";
++ sw1a_reg: sw1ab {
++ regulator-min-microvolt = <300000>;
++ regulator-max-microvolt = <1875000>;
++ regulator-boot-on;
++ regulator-always-on;
++ regulator-ramp-delay = <6250>;
+ };
+
+- GVDD_reg: GVDD {
+- /* 20v */
+- regulator-name = "GVDD";
++ sw1c_reg: sw1c {
++ regulator-min-microvolt = <300000>;
++ regulator-max-microvolt = <1875000>;
++ regulator-boot-on;
++ regulator-always-on;
++ regulator-ramp-delay = <6250>;
+ };
+
+- GVEE_reg: GVEE {
+- /* -22v */
+- regulator-name = "GVEE";
++ sw2_reg: sw2 {
++ regulator-min-microvolt = <800000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-boot-on;
++ regulator-always-on;
+ };
+
+- HVINN_reg: HVINN {
+- /* -22v */
+- regulator-name = "HVINN";
++ sw3a_reg: sw3a {
++ regulator-min-microvolt = <400000>;
++ regulator-max-microvolt = <1975000>;
++ regulator-boot-on;
++ regulator-always-on;
+ };
+
+- HVINP_reg: HVINP {
+- /* 20v */
+- regulator-name = "HVINP";
++ sw3b_reg: sw3b {
++ regulator-min-microvolt = <400000>;
++ regulator-max-microvolt = <1975000>;
++ regulator-boot-on;
++ regulator-always-on;
+ };
+
+- VCOM_reg: VCOM {
+- regulator-name = "VCOM";
+- /* 2's-compliment, -4325000 */
+- regulator-min-microvolt = <0xffbe0178>;
+- /* 2's-compliment, -500000 */
+- regulator-max-microvolt = <0xfff85ee0>;
++ sw4_reg: sw4 {
++ regulator-min-microvolt = <800000>;
++ regulator-max-microvolt = <3300000>;
+ };
+
+- VNEG_reg: VNEG {
+- /* -15v */
+- regulator-name = "VNEG";
++ swbst_reg: swbst {
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5150000>;
+ };
+
+- VPOS_reg: VPOS {
+- /* 15v */
+- regulator-name = "VPOS";
++ snvs_reg: vsnvs {
++ regulator-min-microvolt = <1000000>;
++ regulator-max-microvolt = <3000000>;
++ regulator-boot-on;
++ regulator-always-on;
+ };
+
+- V3P3_reg: V3P3 {
+- regulator-name = "V3P3";
++ vref_reg: vrefddr {
++ regulator-boot-on;
++ regulator-always-on;
+ };
+- };
+- };
+-};
+
+-&iomuxc {
+- pinctrl-names = "default";
+- pinctrl-0 = <&pinctrl_hog_1>, <&pinctrl_hog_2>;
+-
+- hog {
+- pinctrl_hog_2: hoggrp-2 {
+- fsl,pins = <
+- /* MAX17135 */
+- MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x80000000
+- MX6QDL_PAD_EIM_D17__GPIO3_IO17 0x80000000
+- MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x80000000
+- MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x80000000
+- MX6QDL_PAD_EIM_OE__GPIO2_IO25 0x80000000
+- /* elan touch */
+- MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x80000000
+- MX6QDL_PAD_EIM_DA8__GPIO3_IO08 0x80000000
+- MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x170b0
+- >;
+- };
+- };
+-};
++ vgen1_reg: vgen1 {
++ regulator-min-microvolt = <800000>;
++ regulator-max-microvolt = <1550000>;
++ };
+
+-&epdc {
+- pinctrl-names = "default";
+- pinctrl-0 = <&pinctrl_epdc_0>;
+- V3P3-supply = <&V3P3_reg>;
+- VCOM-supply = <&VCOM_reg>;
+- DISPLAY-supply = <&DISPLAY_reg>;
+- status = "okay";
+-};
++ vgen2_reg: vgen2 {
++ regulator-min-microvolt = <800000>;
++ regulator-max-microvolt = <1550000>;
++ };
+
+-&ldb {
+- ipu_id = <0>;
+- sec_ipu_id = <0>;
+-};
++ vgen3_reg: vgen3 {
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <3300000>;
++ };
+
+-&mxcfb1 {
+- status = "okay";
+-};
++ vgen4_reg: vgen4 {
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-always-on;
++ };
+
+-&mxcfb2 {
+- status = "okay";
+-};
++ vgen5_reg: vgen5 {
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-always-on;
++ };
+
+-&pxp {
+- status = "okay";
++ vgen6_reg: vgen6 {
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-always-on;
++ };
++ };
++ };
+ };
+diff --git a/arch/arm/boot/dts/imx6q-sabresd.dts b/arch/arm/boot/dts/imx6q-sabresd.dts
+index 072e7d3..5e5ff56 100644
+--- a/arch/arm/boot/dts/imx6q-sabresd.dts
++++ b/arch/arm/boot/dts/imx6q-sabresd.dts
+@@ -26,6 +26,107 @@
+ offset-usb-charger = <1685>;
+ };
+
++&i2c2 {
++ pmic: pfuze100@08 {
++ compatible = "fsl,pfuze100";
++ reg = <0x08>;
++
++ regulators {
++ sw1a_reg: sw1ab {
++ regulator-min-microvolt = <300000>;
++ regulator-max-microvolt = <1875000>;
++ regulator-boot-on;
++ regulator-always-on;
++ regulator-ramp-delay = <6250>;
++ };
++
++ sw1c_reg: sw1c {
++ regulator-min-microvolt = <300000>;
++ regulator-max-microvolt = <1875000>;
++ regulator-boot-on;
++ regulator-always-on;
++ regulator-ramp-delay = <6250>;
++ };
++
++ sw2_reg: sw2 {
++ regulator-min-microvolt = <800000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-boot-on;
++ regulator-always-on;
++ };
++
++ sw3a_reg: sw3a {
++ regulator-min-microvolt = <400000>;
++ regulator-max-microvolt = <1975000>;
++ regulator-boot-on;
++ regulator-always-on;
++ };
++
++ sw3b_reg: sw3b {
++ regulator-min-microvolt = <400000>;
++ regulator-max-microvolt = <1975000>;
++ regulator-boot-on;
++ regulator-always-on;
++ };
++
++ sw4_reg: sw4 {
++ regulator-min-microvolt = <800000>;
++ regulator-max-microvolt = <3300000>;
++ };
++
++ swbst_reg: swbst {
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5150000>;
++ };
++
++ snvs_reg: vsnvs {
++ regulator-min-microvolt = <1000000>;
++ regulator-max-microvolt = <3000000>;
++ regulator-boot-on;
++ regulator-always-on;
++ };
++
++ vref_reg: vrefddr {
++ regulator-boot-on;
++ regulator-always-on;
++ };
++
++ vgen1_reg: vgen1 {
++ regulator-min-microvolt = <800000>;
++ regulator-max-microvolt = <1550000>;
++ };
++
++ vgen2_reg: vgen2 {
++ regulator-min-microvolt = <800000>;
++ regulator-max-microvolt = <1550000>;
++ };
++
++ vgen3_reg: vgen3 {
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <3300000>;
++ };
++
++ vgen4_reg: vgen4 {
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-always-on;
++ };
++
++ vgen5_reg: vgen5 {
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-always-on;
++ };
++
++ vgen6_reg: vgen6 {
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-always-on;
++ };
++ };
++ };
++};
++
+ &mxcfb1 {
+ status = "okay";
+ };
+diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+index 66b6145..5d774e5 100644
+--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
++++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+@@ -405,105 +405,6 @@
+ mclk_source = <0>;
+ };
+
+- pmic: pfuze100@08 {
+- compatible = "fsl,pfuze100";
+- reg = <0x08>;
+-
+- regulators {
+- sw1a_reg: sw1ab {
+- regulator-min-microvolt = <300000>;
+- regulator-max-microvolt = <1875000>;
+- regulator-boot-on;
+- regulator-always-on;
+- regulator-ramp-delay = <6250>;
+- };
+-
+- sw1c_reg: sw1c {
+- regulator-min-microvolt = <300000>;
+- regulator-max-microvolt = <1875000>;
+- regulator-boot-on;
+- regulator-always-on;
+- regulator-ramp-delay = <6250>;
+- };
+-
+- sw2_reg: sw2 {
+- regulator-min-microvolt = <800000>;
+- regulator-max-microvolt = <3300000>;
+- regulator-boot-on;
+- regulator-always-on;
+- };
+-
+- sw3a_reg: sw3a {
+- regulator-min-microvolt = <400000>;
+- regulator-max-microvolt = <1975000>;
+- regulator-boot-on;
+- regulator-always-on;
+- };
+-
+- sw3b_reg: sw3b {
+- regulator-min-microvolt = <400000>;
+- regulator-max-microvolt = <1975000>;
+- regulator-boot-on;
+- regulator-always-on;
+- };
+-
+- sw4_reg: sw4 {
+- regulator-min-microvolt = <800000>;
+- regulator-max-microvolt = <3300000>;
+- };
+-
+- swbst_reg: swbst {
+- regulator-min-microvolt = <5000000>;
+- regulator-max-microvolt = <5150000>;
+- };
+-
+- snvs_reg: vsnvs {
+- regulator-min-microvolt = <1000000>;
+- regulator-max-microvolt = <3000000>;
+- regulator-boot-on;
+- regulator-always-on;
+- };
+-
+- vref_reg: vrefddr {
+- regulator-boot-on;
+- regulator-always-on;
+- };
+-
+- vgen1_reg: vgen1 {
+- regulator-min-microvolt = <800000>;
+- regulator-max-microvolt = <1550000>;
+- };
+-
+- vgen2_reg: vgen2 {
+- regulator-min-microvolt = <800000>;
+- regulator-max-microvolt = <1550000>;
+- };
+-
+- vgen3_reg: vgen3 {
+- regulator-min-microvolt = <1800000>;
+- regulator-max-microvolt = <3300000>;
+- };
+-
+- vgen4_reg: vgen4 {
+- regulator-min-microvolt = <1800000>;
+- regulator-max-microvolt = <3300000>;
+- regulator-always-on;
+- };
+-
+- vgen5_reg: vgen5 {
+- regulator-min-microvolt = <1800000>;
+- regulator-max-microvolt = <3300000>;
+- regulator-always-on;
+- };
+-
+- vgen6_reg: vgen6 {
+- regulator-min-microvolt = <1800000>;
+- regulator-max-microvolt = <3300000>;
+- regulator-always-on;
+- };
+- };
+- };
+-
+ egalax_ts@04 {
+ compatible = "eeti,egalax_ts";
+ reg = <0x04>;
+--
+2.1.0
+
diff --git a/recipes-kernel/linux/linux-imx-3.10.17/0009-ENGR00301078-2-ARM-dts-imx6sl-evk-add-support-for-pf.patch b/recipes-kernel/linux/linux-imx-3.10.17/0009-ENGR00301078-2-ARM-dts-imx6sl-evk-add-support-for-pf.patch
new file mode 100644
index 0000000..326e0a7
--- /dev/null
+++ b/recipes-kernel/linux/linux-imx-3.10.17/0009-ENGR00301078-2-ARM-dts-imx6sl-evk-add-support-for-pf.patch
@@ -0,0 +1,1202 @@
+From 3082ee40d024412e8c275f1945e4a06a638e81bb Mon Sep 17 00:00:00 2001
+From: Robin Gong <b38343@freescale.com>
+Date: Thu, 6 Mar 2014 19:36:02 +0800
+Subject: [PATCH 09/10] ENGR00301078-2: ARM: dts: imx6sl-evk: add support for
+ pfuze200 on imx6sl-evk
+Organization: O.S. Systems Software LTDA.
+
+move pmic device node from imx6sl-evk.dtsi to upper-level, and add
+another layer on imx6sl-evk to diff pfuze100 or pfuze200. Meanwhile
+only works in ldo-enable mode if using pfuze200, since 'SW1C' switch
+regulator is cut for cost-down which means VDDARM_IN and VDDSOC_IN have
+to share the same switch regulator
+
+Signed-off-by: Robin Gong <b38343@freescale.com>
+
+Upstream-Status: Pending
+---
+ arch/arm/boot/dts/Makefile | 1 +
+ arch/arm/boot/dts/imx6sl-evk-common.dtsi | 504 +++++++++++++++++++++++++++++++
+ arch/arm/boot/dts/imx6sl-evk-pf200.dts | 122 ++++++++
+ arch/arm/boot/dts/imx6sl-evk.dts | 497 +-----------------------------
+ 4 files changed, 630 insertions(+), 494 deletions(-)
+ create mode 100644 arch/arm/boot/dts/imx6sl-evk-common.dtsi
+ create mode 100644 arch/arm/boot/dts/imx6sl-evk-pf200.dts
+
+diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
+index c744cda..c5f9a19 100644
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -135,6 +135,7 @@ dtb-$(CONFIG_ARCH_MXC) += \
+ imx6sl-evk.dtb \
+ imx6sl-evk-csi.dtb \
+ imx6sl-evk-ldo.dtb \
++ imx6sl-evk-pf200.dtb \
+ vf610-twr.dtb
+ dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
+ imx23-olinuxino.dtb \
+diff --git a/arch/arm/boot/dts/imx6sl-evk-common.dtsi b/arch/arm/boot/dts/imx6sl-evk-common.dtsi
+new file mode 100644
+index 0000000..a1a3969
+--- /dev/null
++++ b/arch/arm/boot/dts/imx6sl-evk-common.dtsi
+@@ -0,0 +1,504 @@
++/*
++ * Copyright (C) 2014 Freescale Semiconductor, Inc.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++/ {
++ memory {
++ reg = <0x80000000 0x40000000>;
++ };
++
++ battery: max8903@0 {
++ compatible = "fsl,max8903-charger";
++ pinctrl-names = "default";
++ dok_input = <&gpio4 13 1>;
++ uok_input = <&gpio4 13 1>;
++ chg_input = <&gpio4 15 1>;
++ flt_input = <&gpio4 14 1>;
++ fsl,dcm_always_high;
++ fsl,dc_valid;
++ fsl,adc_disable;
++ status = "okay";
++ };
++
++ regulators {
++ compatible = "simple-bus";
++
++ reg_lcd_3v3: lcd-3v3 {
++ compatible = "regulator-fixed";
++ regulator-name = "lcd-3v3";
++ gpio = <&gpio4 3 0>;
++ enable-active-high;
++ };
++
++ reg_aud3v: wm8962_supply_3v15 {
++ compatible = "regulator-fixed";
++ regulator-name = "wm8962-supply-3v15";
++ regulator-min-microvolt = <3150000>;
++ regulator-max-microvolt = <3150000>;
++ regulator-boot-on;
++ };
++
++ reg_aud4v: wm8962_supply_4v2 {
++ compatible = "regulator-fixed";
++ regulator-name = "wm8962-supply-4v2";
++ regulator-min-microvolt = <4325000>;
++ regulator-max-microvolt = <4325000>;
++ regulator-boot-on;
++ };
++
++ reg_usb_otg1_vbus: usb_otg1_vbus {
++ compatible = "regulator-fixed";
++ regulator-name = "usb_otg1_vbus";
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ gpio = <&gpio4 0 0>;
++ enable-active-high;
++ };
++
++ reg_usb_otg2_vbus: usb_otg2_vbus {
++ compatible = "regulator-fixed";
++ regulator-name = "usb_otg2_vbus";
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ gpio = <&gpio4 2 0>;
++ enable-active-high;
++ };
++ };
++
++ backlight {
++ compatible = "pwm-backlight";
++ pwms = <&pwm1 0 5000000>;
++ brightness-levels = <0 4 8 16 32 64 128 255>;
++ default-brightness-level = <6>;
++ };
++
++ csi_v4l2_cap {
++ compatible = "fsl,imx6sl-csi-v4l2";
++ status = "disabled";
++ };
++
++ pxp_v4l2_out {
++ compatible = "fsl,imx6sl-pxp-v4l2";
++ status = "okay";
++ };
++
++ sound {
++ compatible = "fsl,imx6q-sabresd-wm8962",
++ "fsl,imx-audio-wm8962";
++ model = "wm8962-audio";
++ ssi-controller = <&ssi2>;
++ audio-codec = <&codec>;
++ audio-routing =
++ "Headphone Jack", "HPOUTL",
++ "Headphone Jack", "HPOUTR",
++ "Ext Spk", "SPKOUTL",
++ "Ext Spk", "SPKOUTR",
++ "AMIC", "MICBIAS",
++ "IN3R", "AMIC";
++ amic-mono;
++ mux-int-port = <2>;
++ mux-ext-port = <3>;
++ hp-det-gpios = <&gpio4 19 1>;
++ };
++
++ sound-spdif {
++ compatible = "fsl,imx-audio-spdif",
++ "fsl,imx6sl-evk-spdif";
++ model = "imx-spdif";
++ spdif-controller = <&spdif>;
++ spdif-out;
++ };
++
++ sii902x_reset: sii902x-reset {
++ compatible = "gpio-reset";
++ reset-gpios = <&gpio2 19 1>;
++ reset-delay-us = <100000>;
++ #reset-cells = <0>;
++ };
++};
++
++&audmux {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_audmux_1>;
++ status = "okay";
++};
++
++&csi {
++ status = "disabled";
++};
++
++&ecspi1 {
++ fsl,spi-num-chipselects = <1>;
++ cs-gpios = <&gpio4 11 0>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_ecspi1_1>;
++ status = "okay";
++
++ flash: m25p80@0 {
++ #address-cells = <1>;
++ #size-cells = <1>;
++ compatible = "st,m25p32";
++ spi-max-frequency = <20000000>;
++ reg = <0>;
++ };
++};
++
++&epdc {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_epdc_0>;
++ V3P3-supply = <&V3P3_reg>;
++ VCOM-supply = <&VCOM_reg>;
++ DISPLAY-supply = <&DISPLAY_reg>;
++ status = "okay";
++};
++
++&cpu0 {
++ arm-supply = <&sw1a_reg>;
++ soc-supply = <&sw1c_reg>;
++ pu-supply = <&pu_dummy>; /* use pu_dummy if VDDSOC share with VDDPU */
++};
++
++&fec {
++ pinctrl-names = "default", "sleep";
++ pinctrl-0 = <&pinctrl_fec_1>;
++ pinctrl-1 = <&pinctrl_fec_1_sleep>;
++ phy-mode = "rmii";
++ phy-reset-gpios = <&gpio4 21 0>; /* GPIO4_21 */
++ phy-reset-duration = <1>;
++ status = "okay";
++};
++
++&gpc {
++ fsl,cpu_pupscr_sw2iso = <0xf>;
++ fsl,cpu_pupscr_sw = <0xf>;
++ fsl,cpu_pdnscr_iso2sw = <0x1>;
++ fsl,cpu_pdnscr_iso = <0x1>;
++ fsl,ldo-bypass = <1>; /* use ldo-bypass, u-boot will check it and configure */
++ fsl,wdog-reset = <1>; /* watchdog select of reset source */
++ pu-supply = <&pu_dummy>; /* ldo-bypass:use pu_dummy if VDDSOC share with VDDPU */
++};
++
++&gpu {
++ pu-supply = <&pu_dummy>; /* ldo-bypass:use pu_dummy if VDDSOC share with VDDPU */
++};
++
++&i2c1 {
++ clock-frequency = <100000>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_i2c1_1>;
++ status = "okay";
++
++ elan@10 {
++ compatible = "elan,elan-touch";
++ reg = <0x10>;
++ interrupt-parent = <&gpio2>;
++ interrupts = <10 2>;
++ gpio_elan_cs = <&gpio2 9 0>;
++ gpio_elan_rst = <&gpio4 4 0>;
++ gpio_intr = <&gpio2 10 0>;
++ status = "okay";
++ };
++
++ max17135@48 {
++ compatible = "maxim,max17135";
++ reg = <0x48>;
++ vneg_pwrup = <1>;
++ gvee_pwrup = <2>;
++ vpos_pwrup = <10>;
++ gvdd_pwrup = <12>;
++ gvdd_pwrdn = <1>;
++ vpos_pwrdn = <2>;
++ gvee_pwrdn = <8>;
++ vneg_pwrdn = <10>;
++ gpio_pmic_pwrgood = <&gpio2 13 0>;
++ gpio_pmic_vcom_ctrl = <&gpio2 3 0>;
++ gpio_pmic_wakeup = <&gpio2 14 0>;
++ gpio_pmic_v3p3 = <&gpio2 7 0>;
++ gpio_pmic_intr = <&gpio2 12 0>;
++
++ regulators {
++ DISPLAY_reg: DISPLAY {
++ regulator-name = "DISPLAY";
++ };
++
++ GVDD_reg: GVDD {
++ /* 20v */
++ regulator-name = "GVDD";
++ };
++
++ GVEE_reg: GVEE {
++ /* -22v */
++ regulator-name = "GVEE";
++ };
++
++ HVINN_reg: HVINN {
++ /* -22v */
++ regulator-name = "HVINN";
++ };
++
++ HVINP_reg: HVINP {
++ /* 20v */
++ regulator-name = "HVINP";
++ };
++
++ VCOM_reg: VCOM {
++ regulator-name = "VCOM";
++ /* 2's-compliment, -4325000 */
++ regulator-min-microvolt = <0xffbe0178>;
++ /* 2's-compliment, -500000 */
++ regulator-max-microvolt = <0xfff85ee0>;
++ };
++
++ VNEG_reg: VNEG {
++ /* -15v */
++ regulator-name = "VNEG";
++ };
++
++ VPOS_reg: VPOS {
++ /* 15v */
++ regulator-name = "VPOS";
++ };
++
++ V3P3_reg: V3P3 {
++ regulator-name = "V3P3";
++ };
++ };
++ };
++
++ mma8450@1c {
++ compatible = "fsl,mma8450";
++ reg = <0x1c>;
++ };
++};
++
++&i2c2 {
++ clock-frequency = <100000>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_i2c2_1>;
++ status = "okay";
++
++ codec: wm8962@1a {
++ compatible = "wlf,wm8962";
++ reg = <0x1a>;
++ clocks = <&clks IMX6SL_CLK_EXTERN_AUDIO>;
++ DCVDD-supply = <&vgen3_reg>;
++ DBVDD-supply = <&reg_aud3v>;
++ AVDD-supply = <&vgen3_reg>;
++ CPVDD-supply = <&vgen3_reg>;
++ MICVDD-supply = <&reg_aud3v>;
++ PLLVDD-supply = <&vgen3_reg>;
++ SPKVDD1-supply = <&reg_aud4v>;
++ SPKVDD2-supply = <&reg_aud4v>;
++ amic-mono;
++ };
++
++ sii902x@39 {
++ compatible = "SiI,sii902x";
++ interrupt-parent = <&gpio2>;
++ interrupts = <10 2>;
++ mode_str ="1280x720M@60";
++ bits-per-pixel = <32>;
++ resets = <&sii902x_reset>;
++ reg = <0x39>;
++ };
++};
++
++&i2c3 {
++ clock-frequency = <100000>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_i2c3_1>;
++ status = "disabled";
++
++ ov564x: ov564x@3c {
++ compatible = "ovti,ov564x";
++ reg = <0x3c>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_csi_0>;
++ clocks = <&clks IMX6SL_CLK_CSI>;
++ clock-names = "csi_mclk";
++ AVDD-supply = <&vgen6_reg>; /* 2.8v */
++ DVDD-supply = <&vgen2_reg>; /* 1.5v*/
++ pwn-gpios = <&gpio1 25 1>;
++ rst-gpios = <&gpio1 26 0>;
++ csi_id = <0>;
++ mclk = <24000000>;
++ mclk_source = <0>;
++ };
++};
++
++&iomuxc {
++ pinctrl-names = "default", "sleep";
++ pinctrl-0 = <&pinctrl_hog>;
++ pinctrl-1 = <&pinctrl_hog_sleep>;
++
++ hog {
++ pinctrl_hog: hoggrp {
++ fsl,pins = <
++ MX6SL_PAD_KEY_ROW7__GPIO4_IO07 0x17059
++ MX6SL_PAD_KEY_COL7__GPIO4_IO06 0x17059
++ MX6SL_PAD_SD2_DAT7__GPIO5_IO00 0x17059
++ MX6SL_PAD_SD2_DAT6__GPIO4_IO29 0x17059
++ MX6SL_PAD_REF_CLK_32K__GPIO3_IO22 0x17059
++ MX6SL_PAD_FEC_TX_CLK__GPIO4_IO21 0x80000000
++ MX6SL_PAD_KEY_ROW5__GPIO4_IO03 0x110b0
++ MX6SL_PAD_EPDC_VCOM0__GPIO2_IO03 0x80000000
++ MX6SL_PAD_EPDC_PWRSTAT__GPIO2_IO13 0x80000000
++ MX6SL_PAD_EPDC_PWRCTRL0__GPIO2_IO07 0x80000000
++ MX6SL_PAD_EPDC_PWRWAKEUP__GPIO2_IO14 0x80000000
++ MX6SL_PAD_EPDC_PWRINT__GPIO2_IO12 0x80000000
++ MX6SL_PAD_EPDC_PWRCTRL3__GPIO2_IO10 0x170b0
++ MX6SL_PAD_EPDC_PWRCTRL2__GPIO2_IO09 0x80000000
++ MX6SL_PAD_KEY_COL6__GPIO4_IO04 0x110b0
++ MX6SL_PAD_ECSPI2_MISO__GPIO4_IO14 0x17000
++ MX6SL_PAD_ECSPI2_MOSI__GPIO4_IO13 0x17000
++ MX6SL_PAD_ECSPI2_SS0__GPIO4_IO15 0x17000
++ MX6SL_PAD_FEC_RX_ER__GPIO4_IO19 0x1b0b0
++ MX6SL_PAD_LCD_RESET__GPIO2_IO19 0x1b0b0
++ MX6SL_PAD_KEY_COL4__GPIO4_IO00 0x80000000
++ MX6SL_PAD_KEY_COL5__GPIO4_IO02 0x80000000
++ >;
++ };
++
++ pinctrl_hog_sleep: hoggrp_sleep {
++ fsl,pins = <
++ MX6SL_PAD_KEY_ROW5__GPIO4_IO03 0x3080
++ MX6SL_PAD_KEY_COL6__GPIO4_IO04 0x3080
++ MX6SL_PAD_LCD_RESET__GPIO2_IO19 0x3080
++ >;
++ };
++ };
++};
++
++&kpp {
++ pinctrl-names = "default", "sleep";
++ pinctrl-0 = <&pinctrl_kpp_1>;
++ pinctrl-1 = <&pinctrl_kpp_1_sleep>;
++ linux,keymap = <
++ 0x00000067 /* KEY_UP */
++ 0x0001006c /* KEY_DOWN */
++ 0x0002001c /* KEY_ENTER */
++ 0x01000066 /* KEY_HOME */
++ 0x0101006a /* KEY_RIGHT */
++ 0x01020069 /* KEY_LEFT */
++ 0x02000072 /* KEY_VOLUMEDOWN */
++ 0x02010073 /* KEY_VOLUMEUP */
++ >;
++ status = "okay";
++};
++
++&lcdif {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_lcdif_dat_0
++ &pinctrl_lcdif_ctrl_0>;
++ lcd-supply = <&reg_lcd_3v3>;
++ display = <&display>;
++ status = "okay";
++
++ display: display {
++ bits-per-pixel = <16>;
++ bus-width = <24>;
++
++ display-timings {
++ native-mode = <&timing0>;
++ timing0: timing0 {
++ clock-frequency = <33500000>;
++ hactive = <800>;
++ vactive = <480>;
++ hback-porch = <89>;
++ hfront-porch = <164>;
++ vback-porch = <23>;
++ vfront-porch = <10>;
++ hsync-len = <10>;
++ vsync-len = <10>;
++ hsync-active = <0>;
++ vsync-active = <0>;
++ de-active = <1>;
++ pixelclk-active = <0>;
++ };
++ };
++ };
++};
++
++&pwm1 {
++ pinctrl-names = "default", "sleep";
++ pinctrl-0 = <&pinctrl_pwm1_0>;
++ pinctrl-1 = <&pinctrl_pwm1_0_sleep>;
++ status = "okay";
++};
++
++&pxp {
++ status = "okay";
++};
++
++&spdif {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_spdif_1>;
++ status = "okay";
++};
++
++&ssi2 {
++ fsl,mode = "i2s-slave";
++ status = "okay";
++};
++
++&uart1 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_uart1_1>;
++ status = "okay";
++};
++
++&usbotg1 {
++ vbus-supply = <&reg_usb_otg1_vbus>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_usbotg1_1>;
++ disable-over-current;
++ imx6-usb-charger-detection;
++ status = "okay";
++};
++
++&usbotg2 {
++ vbus-supply = <&reg_usb_otg2_vbus>;
++ dr_mode = "host";
++ disable-over-current;
++ status = "okay";
++};
++
++&usdhc1 {
++ pinctrl-names = "default", "state_100mhz", "state_200mhz";
++ pinctrl-0 = <&pinctrl_usdhc1_1>;
++ pinctrl-1 = <&pinctrl_usdhc1_1_100mhz>;
++ pinctrl-2 = <&pinctrl_usdhc1_1_200mhz>;
++ bus-width = <8>;
++ cd-gpios = <&gpio4 7 0>;
++ wp-gpios = <&gpio4 6 0>;
++ keep-power-in-suspend;
++ enable-sdio-wakeup;
++ status = "okay";
++};
++
++&usdhc2 {
++ pinctrl-names = "default", "state_100mhz", "state_200mhz";
++ pinctrl-0 = <&pinctrl_usdhc2_1>;
++ pinctrl-1 = <&pinctrl_usdhc2_1_100mhz>;
++ pinctrl-2 = <&pinctrl_usdhc2_1_200mhz>;
++ cd-gpios = <&gpio5 0 0>;
++ wp-gpios = <&gpio4 29 0>;
++ keep-power-in-suspend;
++ enable-sdio-wakeup;
++ status = "okay";
++};
++
++&usdhc3 {
++ pinctrl-names = "default", "state_100mhz", "state_200mhz";
++ pinctrl-0 = <&pinctrl_usdhc3_1>;
++ pinctrl-1 = <&pinctrl_usdhc3_1_100mhz>;
++ pinctrl-2 = <&pinctrl_usdhc3_1_200mhz>;
++ cd-gpios = <&gpio3 22 0>;
++ keep-power-in-suspend;
++ enable-sdio-wakeup;
++ status = "okay";
++};
+diff --git a/arch/arm/boot/dts/imx6sl-evk-pf200.dts b/arch/arm/boot/dts/imx6sl-evk-pf200.dts
+new file mode 100644
+index 0000000..55d3081
+--- /dev/null
++++ b/arch/arm/boot/dts/imx6sl-evk-pf200.dts
+@@ -0,0 +1,122 @@
++/*
++ * Copyright (C) 2013-2014 Freescale Semiconductor, Inc.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++/dts-v1/;
++
++#include "imx6sl.dtsi"
++#include "imx6sl-evk-common.dtsi"
++
++/ {
++ model = "Freescale i.MX6 SoloLite EVK Board(PFUZE200)";
++ compatible = "fsl,imx6sl-evk", "fsl,imx6sl";
++};
++
++&cpu0 {
++ arm-supply = <&reg_arm>;
++ soc-supply = <&reg_soc>;
++ pu-supply = <&reg_pu>; /* use pu_dummy if VDDSOC share with VDDPU */
++};
++
++&gpc {
++ fsl,ldo-bypass = <0>; /* use ldo-bypass, u-boot will check it and configure */
++ fsl,wdog-reset = <1>; /* watchdog select of reset source */
++ pu-supply = <&reg_pu>; /* ldo-bypass:use pu_dummy if VDDSOC share with VDDPU */
++};
++
++&gpu {
++ pu-supply = <&reg_pu>; /* ldo-bypass:use pu_dummy if VDDSOC share with VDDPU */
++};
++
++&i2c1 {
++ pmic: pfuze200@08 {
++ compatible = "fsl,pfuze200";
++ reg = <0x08>;
++
++ regulators {
++ sw1a_reg: sw1ab {
++ regulator-min-microvolt = <300000>;
++ regulator-max-microvolt = <1875000>;
++ regulator-boot-on;
++ regulator-always-on;
++ regulator-ramp-delay = <6250>;
++ };
++
++ sw2_reg: sw2 {
++ regulator-min-microvolt = <800000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-boot-on;
++ regulator-always-on;
++ };
++
++ sw3a_reg: sw3a {
++ regulator-min-microvolt = <400000>;
++ regulator-max-microvolt = <1975000>;
++ regulator-boot-on;
++ regulator-always-on;
++ };
++
++ sw3b_reg: sw3b {
++ regulator-min-microvolt = <400000>;
++ regulator-max-microvolt = <1975000>;
++ regulator-boot-on;
++ regulator-always-on;
++ };
++
++ swbst_reg: swbst {
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5150000>;
++ };
++
++ snvs_reg: vsnvs {
++ regulator-min-microvolt = <1000000>;
++ regulator-max-microvolt = <3000000>;
++ regulator-boot-on;
++ regulator-always-on;
++ };
++
++ vref_reg: vrefddr {
++ regulator-boot-on;
++ regulator-always-on;
++ };
++
++ vgen1_reg: vgen1 {
++ regulator-min-microvolt = <800000>;
++ regulator-max-microvolt = <1550000>;
++ };
++
++ vgen2_reg: vgen2 {
++ regulator-min-microvolt = <800000>;
++ regulator-max-microvolt = <1550000>;
++ };
++
++ vgen3_reg: vgen3 {
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-always-on;
++ };
++
++ vgen4_reg: vgen4 {
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-always-on;
++ };
++
++ vgen5_reg: vgen5 {
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-always-on;
++ };
++
++ vgen6_reg: vgen6 {
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-always-on;
++ };
++ };
++ };
++};
+diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts
+index 4966f38..ed0ce89 100644
+--- a/arch/arm/boot/dts/imx6sl-evk.dts
++++ b/arch/arm/boot/dts/imx6sl-evk.dts
+@@ -1,5 +1,5 @@
+ /*
+- * Copyright (C) 2013 Freescale Semiconductor, Inc.
++ * Copyright (C) 2013-2014 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+@@ -9,195 +9,14 @@
+ /dts-v1/;
+
+ #include "imx6sl.dtsi"
++#include "imx6sl-evk-common.dtsi"
+
+ / {
+- model = "Freescale i.MX6 SoloLite EVK Board";
++ model = "Freescale i.MX6 SoloLite EVK Board(PFUZE100)";
+ compatible = "fsl,imx6sl-evk", "fsl,imx6sl";
+-
+- memory {
+- reg = <0x80000000 0x40000000>;
+- };
+-
+- battery: max8903@0 {
+- compatible = "fsl,max8903-charger";
+- pinctrl-names = "default";
+- dok_input = <&gpio4 13 1>;
+- uok_input = <&gpio4 13 1>;
+- chg_input = <&gpio4 15 1>;
+- flt_input = <&gpio4 14 1>;
+- fsl,dcm_always_high;
+- fsl,dc_valid;
+- fsl,adc_disable;
+- status = "okay";
+- };
+- regulators {
+- compatible = "simple-bus";
+-
+- reg_lcd_3v3: lcd-3v3 {
+- compatible = "regulator-fixed";
+- regulator-name = "lcd-3v3";
+- gpio = <&gpio4 3 0>;
+- enable-active-high;
+- };
+-
+- reg_aud3v: wm8962_supply_3v15 {
+- compatible = "regulator-fixed";
+- regulator-name = "wm8962-supply-3v15";
+- regulator-min-microvolt = <3150000>;
+- regulator-max-microvolt = <3150000>;
+- regulator-boot-on;
+- };
+-
+- reg_aud4v: wm8962_supply_4v2 {
+- compatible = "regulator-fixed";
+- regulator-name = "wm8962-supply-4v2";
+- regulator-min-microvolt = <4325000>;
+- regulator-max-microvolt = <4325000>;
+- regulator-boot-on;
+- };
+-
+- reg_usb_otg1_vbus: usb_otg1_vbus {
+- compatible = "regulator-fixed";
+- regulator-name = "usb_otg1_vbus";
+- regulator-min-microvolt = <5000000>;
+- regulator-max-microvolt = <5000000>;
+- gpio = <&gpio4 0 0>;
+- enable-active-high;
+- };
+-
+- reg_usb_otg2_vbus: usb_otg2_vbus {
+- compatible = "regulator-fixed";
+- regulator-name = "usb_otg2_vbus";
+- regulator-min-microvolt = <5000000>;
+- regulator-max-microvolt = <5000000>;
+- gpio = <&gpio4 2 0>;
+- enable-active-high;
+- };
+- };
+-
+- backlight {
+- compatible = "pwm-backlight";
+- pwms = <&pwm1 0 5000000>;
+- brightness-levels = <0 4 8 16 32 64 128 255>;
+- default-brightness-level = <6>;
+- };
+-
+- csi_v4l2_cap {
+- compatible = "fsl,imx6sl-csi-v4l2";
+- status = "disabled";
+- };
+-
+- pxp_v4l2_out {
+- compatible = "fsl,imx6sl-pxp-v4l2";
+- status = "okay";
+- };
+-
+- sound {
+- compatible = "fsl,imx6q-sabresd-wm8962",
+- "fsl,imx-audio-wm8962";
+- model = "wm8962-audio";
+- ssi-controller = <&ssi2>;
+- audio-codec = <&codec>;
+- audio-routing =
+- "Headphone Jack", "HPOUTL",
+- "Headphone Jack", "HPOUTR",
+- "Ext Spk", "SPKOUTL",
+- "Ext Spk", "SPKOUTR",
+- "AMIC", "MICBIAS",
+- "IN3R", "AMIC";
+- amic-mono;
+- mux-int-port = <2>;
+- mux-ext-port = <3>;
+- hp-det-gpios = <&gpio4 19 1>;
+- };
+-
+- sound-spdif {
+- compatible = "fsl,imx-audio-spdif",
+- "fsl,imx6sl-evk-spdif";
+- model = "imx-spdif";
+- spdif-controller = <&spdif>;
+- spdif-out;
+- };
+-
+- sii902x_reset: sii902x-reset {
+- compatible = "gpio-reset";
+- reset-gpios = <&gpio2 19 1>;
+- reset-delay-us = <100000>;
+- #reset-cells = <0>;
+- };
+-};
+-
+-&audmux {
+- pinctrl-names = "default";
+- pinctrl-0 = <&pinctrl_audmux_1>;
+- status = "okay";
+-};
+-
+-&csi {
+- status = "disabled";
+-};
+-
+-&ecspi1 {
+- fsl,spi-num-chipselects = <1>;
+- cs-gpios = <&gpio4 11 0>;
+- pinctrl-names = "default";
+- pinctrl-0 = <&pinctrl_ecspi1_1>;
+- status = "okay";
+-
+- flash: m25p80@0 {
+- #address-cells = <1>;
+- #size-cells = <1>;
+- compatible = "st,m25p32";
+- spi-max-frequency = <20000000>;
+- reg = <0>;
+- };
+-};
+-
+-&epdc {
+- pinctrl-names = "default";
+- pinctrl-0 = <&pinctrl_epdc_0>;
+- V3P3-supply = <&V3P3_reg>;
+- VCOM-supply = <&VCOM_reg>;
+- DISPLAY-supply = <&DISPLAY_reg>;
+- status = "okay";
+-};
+-
+-&cpu0 {
+- arm-supply = <&sw1a_reg>;
+- soc-supply = <&sw1c_reg>;
+- pu-supply = <&pu_dummy>; /* use pu_dummy if VDDSOC share with VDDPU */
+-};
+-
+-&fec {
+- pinctrl-names = "default", "sleep";
+- pinctrl-0 = <&pinctrl_fec_1>;
+- pinctrl-1 = <&pinctrl_fec_1_sleep>;
+- phy-mode = "rmii";
+- phy-reset-gpios = <&gpio4 21 0>; /* GPIO4_21 */
+- phy-reset-duration = <1>;
+- status = "okay";
+-};
+-
+-&gpc {
+- fsl,cpu_pupscr_sw2iso = <0xf>;
+- fsl,cpu_pupscr_sw = <0xf>;
+- fsl,cpu_pdnscr_iso2sw = <0x1>;
+- fsl,cpu_pdnscr_iso = <0x1>;
+- fsl,ldo-bypass = <1>; /* use ldo-bypass, u-boot will check it and configure */
+- fsl,wdog-reset = <1>; /* watchdog select of reset source */
+- pu-supply = <&pu_dummy>; /* ldo-bypass:use pu_dummy if VDDSOC share with VDDPU */
+-};
+-
+-&gpu {
+- pu-supply = <&pu_dummy>; /* ldo-bypass:use pu_dummy if VDDSOC share with VDDPU */
+ };
+
+ &i2c1 {
+- clock-frequency = <100000>;
+- pinctrl-names = "default";
+- pinctrl-0 = <&pinctrl_i2c1_1>;
+- status = "okay";
+-
+ pmic: pfuze100@08 {
+ compatible = "fsl,pfuze100";
+ reg = <0x08>;
+@@ -297,314 +116,4 @@
+ };
+ };
+ };
+-
+- elan@10 {
+- compatible = "elan,elan-touch";
+- reg = <0x10>;
+- interrupt-parent = <&gpio2>;
+- interrupts = <10 2>;
+- gpio_elan_cs = <&gpio2 9 0>;
+- gpio_elan_rst = <&gpio4 4 0>;
+- gpio_intr = <&gpio2 10 0>;
+- status = "okay";
+- };
+-
+- max17135@48 {
+- compatible = "maxim,max17135";
+- reg = <0x48>;
+- vneg_pwrup = <1>;
+- gvee_pwrup = <2>;
+- vpos_pwrup = <10>;
+- gvdd_pwrup = <12>;
+- gvdd_pwrdn = <1>;
+- vpos_pwrdn = <2>;
+- gvee_pwrdn = <8>;
+- vneg_pwrdn = <10>;
+- gpio_pmic_pwrgood = <&gpio2 13 0>;
+- gpio_pmic_vcom_ctrl = <&gpio2 3 0>;
+- gpio_pmic_wakeup = <&gpio2 14 0>;
+- gpio_pmic_v3p3 = <&gpio2 7 0>;
+- gpio_pmic_intr = <&gpio2 12 0>;
+-
+- regulators {
+- DISPLAY_reg: DISPLAY {
+- regulator-name = "DISPLAY";
+- };
+-
+- GVDD_reg: GVDD {
+- /* 20v */
+- regulator-name = "GVDD";
+- };
+-
+- GVEE_reg: GVEE {
+- /* -22v */
+- regulator-name = "GVEE";
+- };
+-
+- HVINN_reg: HVINN {
+- /* -22v */
+- regulator-name = "HVINN";
+- };
+-
+- HVINP_reg: HVINP {
+- /* 20v */
+- regulator-name = "HVINP";
+- };
+-
+- VCOM_reg: VCOM {
+- regulator-name = "VCOM";
+- /* 2's-compliment, -4325000 */
+- regulator-min-microvolt = <0xffbe0178>;
+- /* 2's-compliment, -500000 */
+- regulator-max-microvolt = <0xfff85ee0>;
+- };
+-
+- VNEG_reg: VNEG {
+- /* -15v */
+- regulator-name = "VNEG";
+- };
+-
+- VPOS_reg: VPOS {
+- /* 15v */
+- regulator-name = "VPOS";
+- };
+-
+- V3P3_reg: V3P3 {
+- regulator-name = "V3P3";
+- };
+- };
+- };
+-
+- mma8450@1c {
+- compatible = "fsl,mma8450";
+- reg = <0x1c>;
+- };
+-};
+-
+-&i2c2 {
+- clock-frequency = <100000>;
+- pinctrl-names = "default";
+- pinctrl-0 = <&pinctrl_i2c2_1>;
+- status = "okay";
+-
+- codec: wm8962@1a {
+- compatible = "wlf,wm8962";
+- reg = <0x1a>;
+- clocks = <&clks IMX6SL_CLK_EXTERN_AUDIO>;
+- DCVDD-supply = <&vgen3_reg>;
+- DBVDD-supply = <&reg_aud3v>;
+- AVDD-supply = <&vgen3_reg>;
+- CPVDD-supply = <&vgen3_reg>;
+- MICVDD-supply = <&reg_aud3v>;
+- PLLVDD-supply = <&vgen3_reg>;
+- SPKVDD1-supply = <&reg_aud4v>;
+- SPKVDD2-supply = <&reg_aud4v>;
+- amic-mono;
+- };
+-
+- sii902x@39 {
+- compatible = "SiI,sii902x";
+- interrupt-parent = <&gpio2>;
+- interrupts = <10 2>;
+- mode_str ="1280x720M@60";
+- bits-per-pixel = <32>;
+- resets = <&sii902x_reset>;
+- reg = <0x39>;
+- };
+-};
+-
+-&i2c3 {
+- clock-frequency = <100000>;
+- pinctrl-names = "default";
+- pinctrl-0 = <&pinctrl_i2c3_1>;
+- status = "disabled";
+-
+- ov564x: ov564x@3c {
+- compatible = "ovti,ov564x";
+- reg = <0x3c>;
+- pinctrl-names = "default";
+- pinctrl-0 = <&pinctrl_csi_0>;
+- clocks = <&clks IMX6SL_CLK_CSI>;
+- clock-names = "csi_mclk";
+- AVDD-supply = <&vgen6_reg>; /* 2.8v */
+- DVDD-supply = <&vgen2_reg>; /* 1.5v*/
+- pwn-gpios = <&gpio1 25 1>;
+- rst-gpios = <&gpio1 26 0>;
+- csi_id = <0>;
+- mclk = <24000000>;
+- mclk_source = <0>;
+- };
+-};
+-
+-&iomuxc {
+- pinctrl-names = "default", "sleep";
+- pinctrl-0 = <&pinctrl_hog>;
+- pinctrl-1 = <&pinctrl_hog_sleep>;
+-
+- hog {
+- pinctrl_hog: hoggrp {
+- fsl,pins = <
+- MX6SL_PAD_KEY_ROW7__GPIO4_IO07 0x17059
+- MX6SL_PAD_KEY_COL7__GPIO4_IO06 0x17059
+- MX6SL_PAD_SD2_DAT7__GPIO5_IO00 0x17059
+- MX6SL_PAD_SD2_DAT6__GPIO4_IO29 0x17059
+- MX6SL_PAD_REF_CLK_32K__GPIO3_IO22 0x17059
+- MX6SL_PAD_FEC_TX_CLK__GPIO4_IO21 0x80000000
+- MX6SL_PAD_KEY_ROW5__GPIO4_IO03 0x110b0
+- MX6SL_PAD_EPDC_VCOM0__GPIO2_IO03 0x80000000
+- MX6SL_PAD_EPDC_PWRSTAT__GPIO2_IO13 0x80000000
+- MX6SL_PAD_EPDC_PWRCTRL0__GPIO2_IO07 0x80000000
+- MX6SL_PAD_EPDC_PWRWAKEUP__GPIO2_IO14 0x80000000
+- MX6SL_PAD_EPDC_PWRINT__GPIO2_IO12 0x80000000
+- MX6SL_PAD_EPDC_PWRCTRL3__GPIO2_IO10 0x170b0
+- MX6SL_PAD_EPDC_PWRCTRL2__GPIO2_IO09 0x80000000
+- MX6SL_PAD_KEY_COL6__GPIO4_IO04 0x110b0
+- MX6SL_PAD_ECSPI2_MISO__GPIO4_IO14 0x17000
+- MX6SL_PAD_ECSPI2_MOSI__GPIO4_IO13 0x17000
+- MX6SL_PAD_ECSPI2_SS0__GPIO4_IO15 0x17000
+- MX6SL_PAD_FEC_RX_ER__GPIO4_IO19 0x1b0b0
+- MX6SL_PAD_LCD_RESET__GPIO2_IO19 0x1b0b0
+- MX6SL_PAD_KEY_COL4__GPIO4_IO00 0x80000000
+- MX6SL_PAD_KEY_COL5__GPIO4_IO02 0x80000000
+- >;
+- };
+-
+- pinctrl_hog_sleep: hoggrp_sleep {
+- fsl,pins = <
+- MX6SL_PAD_KEY_ROW5__GPIO4_IO03 0x3080
+- MX6SL_PAD_KEY_COL6__GPIO4_IO04 0x3080
+- MX6SL_PAD_LCD_RESET__GPIO2_IO19 0x3080
+- >;
+- };
+- };
+-};
+-
+-&kpp {
+- pinctrl-names = "default", "sleep";
+- pinctrl-0 = <&pinctrl_kpp_1>;
+- pinctrl-1 = <&pinctrl_kpp_1_sleep>;
+- linux,keymap = <
+- 0x00000067 /* KEY_UP */
+- 0x0001006c /* KEY_DOWN */
+- 0x0002001c /* KEY_ENTER */
+- 0x01000066 /* KEY_HOME */
+- 0x0101006a /* KEY_RIGHT */
+- 0x01020069 /* KEY_LEFT */
+- 0x02000072 /* KEY_VOLUMEDOWN */
+- 0x02010073 /* KEY_VOLUMEUP */
+- >;
+- status = "okay";
+-};
+-
+-&lcdif {
+- pinctrl-names = "default";
+- pinctrl-0 = <&pinctrl_lcdif_dat_0
+- &pinctrl_lcdif_ctrl_0>;
+- lcd-supply = <&reg_lcd_3v3>;
+- display = <&display>;
+- status = "okay";
+-
+- display: display {
+- bits-per-pixel = <16>;
+- bus-width = <24>;
+-
+- display-timings {
+- native-mode = <&timing0>;
+- timing0: timing0 {
+- clock-frequency = <33500000>;
+- hactive = <800>;
+- vactive = <480>;
+- hback-porch = <89>;
+- hfront-porch = <164>;
+- vback-porch = <23>;
+- vfront-porch = <10>;
+- hsync-len = <10>;
+- vsync-len = <10>;
+- hsync-active = <0>;
+- vsync-active = <0>;
+- de-active = <1>;
+- pixelclk-active = <0>;
+- };
+- };
+- };
+-};
+-
+-&pwm1 {
+- pinctrl-names = "default", "sleep";
+- pinctrl-0 = <&pinctrl_pwm1_0>;
+- pinctrl-1 = <&pinctrl_pwm1_0_sleep>;
+- status = "okay";
+-};
+-
+-&pxp {
+- status = "okay";
+-};
+-
+-&spdif {
+- pinctrl-names = "default";
+- pinctrl-0 = <&pinctrl_spdif_1>;
+- status = "okay";
+-};
+-
+-&ssi2 {
+- fsl,mode = "i2s-slave";
+- status = "okay";
+-};
+-
+-&uart1 {
+- pinctrl-names = "default";
+- pinctrl-0 = <&pinctrl_uart1_1>;
+- status = "okay";
+-};
+-
+-&usbotg1 {
+- vbus-supply = <&reg_usb_otg1_vbus>;
+- pinctrl-names = "default";
+- pinctrl-0 = <&pinctrl_usbotg1_1>;
+- disable-over-current;
+- imx6-usb-charger-detection;
+- status = "okay";
+-};
+-
+-&usbotg2 {
+- vbus-supply = <&reg_usb_otg2_vbus>;
+- dr_mode = "host";
+- disable-over-current;
+- status = "okay";
+-};
+-
+-&usdhc1 {
+- pinctrl-names = "default", "state_100mhz", "state_200mhz";
+- pinctrl-0 = <&pinctrl_usdhc1_1>;
+- pinctrl-1 = <&pinctrl_usdhc1_1_100mhz>;
+- pinctrl-2 = <&pinctrl_usdhc1_1_200mhz>;
+- bus-width = <8>;
+- cd-gpios = <&gpio4 7 0>;
+- wp-gpios = <&gpio4 6 0>;
+- keep-power-in-suspend;
+- enable-sdio-wakeup;
+- status = "okay";
+-};
+-
+-&usdhc2 {
+- pinctrl-names = "default", "state_100mhz", "state_200mhz";
+- pinctrl-0 = <&pinctrl_usdhc2_1>;
+- pinctrl-1 = <&pinctrl_usdhc2_1_100mhz>;
+- pinctrl-2 = <&pinctrl_usdhc2_1_200mhz>;
+- cd-gpios = <&gpio5 0 0>;
+- wp-gpios = <&gpio4 29 0>;
+- keep-power-in-suspend;
+- enable-sdio-wakeup;
+- status = "okay";
+-};
+-
+-&usdhc3 {
+- pinctrl-names = "default", "state_100mhz", "state_200mhz";
+- pinctrl-0 = <&pinctrl_usdhc3_1>;
+- pinctrl-1 = <&pinctrl_usdhc3_1_100mhz>;
+- pinctrl-2 = <&pinctrl_usdhc3_1_200mhz>;
+- cd-gpios = <&gpio3 22 0>;
+- keep-power-in-suspend;
+- enable-sdio-wakeup;
+- status = "okay";
+ };
+--
+2.1.0
+
diff --git a/recipes-kernel/linux/linux-imx-3.10.17/0010-ENGR00318392-ARM-imx6x-Save-restore-SCU-and-some-CP1.patch b/recipes-kernel/linux/linux-imx-3.10.17/0010-ENGR00318392-ARM-imx6x-Save-restore-SCU-and-some-CP1.patch
new file mode 100644
index 0000000..4459576
--- /dev/null
+++ b/recipes-kernel/linux/linux-imx-3.10.17/0010-ENGR00318392-ARM-imx6x-Save-restore-SCU-and-some-CP1.patch
@@ -0,0 +1,133 @@
+From 4a46352d23f1f7b4f513487cb1701a8592ba980f Mon Sep 17 00:00:00 2001
+From: Ranjani Vaidyanathan <Ranjani.Vaidyanathan@freescale.com>
+Date: Fri, 13 Jun 2014 15:43:14 -0500
+Subject: [PATCH 10/10] ENGR00318392 ARM:imx6x: Save/restore SCU and some CP15
+ registers across suspend/resume
+Organization: O.S. Systems Software LTDA.
+
+This patch ensures that the SCU and certain A9 CP15 registers state are maintained across
+a suspend/resume cycle:
+1. Need to ensure that SCU standby bit is set again after suspend/resume cycle, else
+the system will never WAIT mode after a suspend/resume cycle. This bit should be enabled
+on all SMP systems immaterial of whether CPUIDLE is enabled or not.
+2. Several A9 errata workarounds involve setting bits in the ARM diagnostic register.
+Save/restore this register across a suspend/resume cycle.
+3. Save and restore the A9 power control register also.
+
+Signed-off-by: Ranjani Vaidyanathan <Ranjani.Vaidyanathan@freescale.com>
+(cherry picked from commit 7b5b4ef5b3cdc65c0576f87cfa52bcca1bda8b33)
+
+Upstream-Status: Pending
+---
+ arch/arm/mach-imx/cpuidle-imx6q.c | 5 +----
+ arch/arm/mach-imx/platsmp.c | 4 +++-
+ arch/arm/mach-imx/pm-imx6.c | 36 ++++++++++++++++++++++++++++++++++++
+ 3 files changed, 40 insertions(+), 5 deletions(-)
+
+diff --git a/arch/arm/mach-imx/cpuidle-imx6q.c b/arch/arm/mach-imx/cpuidle-imx6q.c
+index d74d0ce..9ffbd34 100644
+--- a/arch/arm/mach-imx/cpuidle-imx6q.c
++++ b/arch/arm/mach-imx/cpuidle-imx6q.c
+@@ -1,5 +1,5 @@
+ /*
+- * Copyright (C) 2012-2013 Freescale Semiconductor, Inc.
++ * Copyright (C) 2012-2014 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+@@ -65,9 +65,6 @@ static struct cpuidle_driver imx6q_cpuidle_driver = {
+
+ int __init imx6q_cpuidle_init(void)
+ {
+- /* Need to enable SCU standby for entering WAIT modes */
+- imx_scu_standby_enable();
+-
+ /* Set cache lpm bit for reliable WAIT mode support */
+ imx6_set_cache_lpm_in_wait(true);
+
+diff --git a/arch/arm/mach-imx/platsmp.c b/arch/arm/mach-imx/platsmp.c
+index c6e1ab5..d2fa7ec 100644
+--- a/arch/arm/mach-imx/platsmp.c
++++ b/arch/arm/mach-imx/platsmp.c
+@@ -1,5 +1,5 @@
+ /*
+- * Copyright 2011 Freescale Semiconductor, Inc.
++ * Copyright 2011-2014 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+@@ -77,6 +77,8 @@ static void __init imx_smp_init_cpus(void)
+ void imx_smp_prepare(void)
+ {
+ scu_enable(scu_base);
++ /* Need to enable SCU standby for entering WAIT mode */
++ imx_scu_standby_enable();
+ }
+
+ static void __init imx_smp_prepare_cpus(unsigned int max_cpus)
+diff --git a/arch/arm/mach-imx/pm-imx6.c b/arch/arm/mach-imx/pm-imx6.c
+index de46b87..587cc7e 100644
+--- a/arch/arm/mach-imx/pm-imx6.c
++++ b/arch/arm/mach-imx/pm-imx6.c
+@@ -73,6 +73,8 @@ static int (*suspend_in_iram_fn)(void *iram_vbase,
+ unsigned long iram_pbase, unsigned int cpu_type);
+ static unsigned int cpu_type;
+ static void __iomem *ccm_base;
++static unsigned long dcr;
++static unsigned long pcr;
+
+ unsigned long save_ttbr1(void)
+ {
+@@ -111,6 +113,34 @@ void imx6_set_cache_lpm_in_wait(bool enable)
+ }
+ }
+
++static void imx6_save_cpu_arch_regs(void)
++{
++ /* Save the Diagnostic Control Register. */
++ asm volatile(
++ "mrc p15, 0, %0, c15, c0, 1\n"
++ : "=r" (dcr)
++ );
++ /* Save the Power Control Register. */
++ asm volatile(
++ "mrc p15, 0, %0, c15, c0, 0\n"
++ : "=r" (pcr)
++ );
++}
++
++static void imx6_restore_cpu_arch_regs(void)
++{
++ /* Restore the diagnostic Control Register. */
++ asm volatile(
++ "mcr p15, 0, %0, c15, c0, 1\n"
++ : : "r" (dcr)
++ );
++ /* Restore the Power Control Register. */
++ asm volatile(
++ "mcr p15, 0, %0, c15, c0, 0\n"
++ : : "r" (pcr)
++ );
++}
++
+ static void imx6_enable_rbc(bool enable)
+ {
+ u32 val;
+@@ -290,8 +320,14 @@ static int imx6_pm_enter(suspend_state_t state)
+ imx_gpc_pre_suspend(true);
+ imx_anatop_pre_suspend();
+ imx_set_cpu_jump(0, v7_cpu_resume);
++
++ imx6_save_cpu_arch_regs();
++
+ /* Zzz ... */
+ cpu_suspend(0, imx6_suspend_finish);
++
++ imx6_restore_cpu_arch_regs();
++
+ if (!cpu_is_imx6sl())
+ imx_smp_prepare();
+ imx_anatop_post_resume();
+--
+2.1.0
+
diff --git a/recipes-kernel/linux/linux-imx_3.10.17.bb b/recipes-kernel/linux/linux-imx_3.10.17.bb
index 9ec3a3e..1b34520 100644
--- a/recipes-kernel/linux/linux-imx_3.10.17.bb
+++ b/recipes-kernel/linux/linux-imx_3.10.17.bb
@@ -14,4 +14,15 @@ SRCBRANCH = "imx_3.10.17_1.0.1_ga"
SRCREV = "dac46dcf913585956a0e7a838e6f4b7465f00f57"
LOCALVERSION = "-1.0.1_ga"
+SRC_URI += "file://0001-ENGR00309838-ARM-imx6sl-gpc-add-chip-revision-check-.patch \
+ file://0002-regulator-pfuze100-Fix-address-of-FABID.patch \
+ file://0003-regulator-pfuze100-add-pfuze200-support.patch \
+ file://0004-regulator-pfuze100-Add-terminate-entry-for-i2c-of-_d.patch \
+ file://0005-regulator-pfuze100-Add-PFUZE200-support-to-Kconfig-a.patch \
+ file://0006-regulator-pfuze100-Use-of_get_child_by_name.patch \
+ file://0007-pfuze100-regulator-Fix-of_node_get-parameter.patch \
+ file://0008-ENGR00301078-1-ARM-dts-imx6dl-sabresd-add-support-fo.patch \
+ file://0009-ENGR00301078-2-ARM-dts-imx6sl-evk-add-support-for-pf.patch \
+ file://0010-ENGR00318392-ARM-imx6x-Save-restore-SCU-and-some-CP1.patch"
+
COMPATIBLE_MACHINE = "(mx6)"