blob: c63c8d68c8472c31aa551994b78c45fab33fcdcf (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
|
#@TYPE: Machine
#@NAME: NXP i.MX 8M Plus EVK with DDR4
#@SOC: i.MX8MP
#@DESCRIPTION: Machine configuration for NXP i.MX 8M Plus Evaluation Kit with DDR4
#@MAINTAINER: Jun Zhu <junzhu@nxp.com>
require include/imx8mp-evk.inc
# FIXME: This machine is not yet supported by u-boot-fslc, so for now
# use u-boot-imx for mainline.
IMX_DEFAULT_BOOTLOADER:use-mainline-bsp = "u-boot-imx"
KERNEL_DEVICETREE_BASENAME = "${MACHINE}"
UBOOT_CONFIG_BASENAME = "imx8mp_ddr4_evk"
UBOOT_CONFIG[nand] = "${UBOOT_CONFIG_BASENAME}_nand_defconfig"
# Set DDR FIRMWARE
DDR_FIRMWARE_VERSION = "202006"
DDR_FIRMWARE_NAME = " \
ddr4_dmem_1d_${DDR_FIRMWARE_VERSION}.bin \
ddr4_imem_1d_${DDR_FIRMWARE_VERSION}.bin \
ddr4_dmem_2d_${DDR_FIRMWARE_VERSION}.bin \
ddr4_imem_2d_${DDR_FIRMWARE_VERSION}.bin \
"
IMXBOOT_TARGETS_BASENAME = "flash_ddr4_evk"
# Mainline BSP doesn't support DDR4 so it must be set to nxp.
# Also this machine isn't supported by u-boot-fslc but imx8mp-evk.inc already
# set the bootloader to u-boot-imx instead when NXP BSP is used.
IMX_DEFAULT_BSP = "nxp"
|
