#@TYPE: Machine #@NAME: NXP LS1021ATWR board #@SOC: ls102xa #@DESCRIPTION: Machine configuration for NXP QorIQ LS1 Tower System # Module Rev2.0 with ARM Cortex-A7 core #@MAINTAINER: Zhenhua Luo MACHINEOVERRIDES =. "ls102xa:" require conf/machine/include/qoriq-arm.inc require conf/machine/include/tune-cortexa7.inc DEFAULTTUNE = "cortexa7hf-neon" UBOOT_CONFIG ??= "sdcard-ifc-secure-boot sdcard-ifc sdcard-qspi lpuart qspi secure-boot nor" UBOOT_CONFIG[nor] = "ls1021atwr_nor_config,,u-boot-dtb.bin" UBOOT_CONFIG[sdcard-ifc] = "ls1021atwr_sdcard_ifc_config,,u-boot-with-spl-pbl.bin" UBOOT_CONFIG[sdcard-qspi] = "ls1021atwr_sdcard_qspi_config,,u-boot-with-spl-pbl.bin" UBOOT_CONFIG[lpuart] = "ls1021atwr_nor_lpuart_config,,u-boot-dtb.bin" UBOOT_CONFIG[qspi] = "ls1021atwr_qspi_config,,u-boot-dtb.bin" UBOOT_CONFIG[secure-boot] = "ls1021atwr_nor_SECURE_BOOT_config,,u-boot-dtb.bin" UBOOT_CONFIG[sdcard-ifc-secure-boot] = "ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig,,u-boot-with-spl-pbl.bin" QE_UCODE="iram_Type_A_LS1021a_r1.0.bin" KERNEL_DEVICETREE ?= "ls1021a-twr.dtb" KERNEL_DEFCONFIG ?= "multi_v7_defconfig" KERNEL_IMAGETYPES = "zImage" UBOOT_ENTRYPOINT = "0x80008000" EXTRA_IMAGEDEPENDS += "rcw qe-ucode" USE_VT ?= "0"