#@TYPE: Machine
#@NAME: NXP i.MX8MM LPDDR4 Evaluation Kit and i.MX8MM DDR4 Evaluation Kit
#@SOC: i.MX8MM
#@DESCRIPTION: Machine configuration for NXP i.MX8MMini LPDDR4 EVK and i.MX8MMini DDR4 EVK
#@MAINTAINER: Jun Zhu <junzhu@nxp.com>

MACHINEOVERRIDES =. "mx8:mx8m:mx8mm:"

require conf/machine/include/imx-base.inc
require conf/machine/include/tune-cortexa53.inc

MACHINE_FEATURES += " pci wifi bluetooth optee qca9377 qca6174"

KERNEL_DEVICETREE = "freescale/fsl-imx8mm-evk.dtb \
                     freescale/fsl-imx8mm-evk-ak4497.dtb freescale/fsl-imx8mm-evk-ak5558.dtb \
                     freescale/fsl-imx8mm-evk-audio-tdm.dtb freescale/fsl-imx8mm-evk-inmate.dtb \
                     freescale/fsl-imx8mm-evk-m4.dtb freescale/fsl-imx8mm-evk-rm67191.dtb \
                     freescale/fsl-imx8mm-ddr4-evk.dtb freescale/fsl-imx8mm-ddr4-evk-rm67191.dtb \
                     freescale/fsl-imx8mm-ddr4-qca9377-evk.dtb freescale/fsl-imx8mm-evk-root.dtb"

UBOOT_CONFIG ??= "sd"
UBOOT_CONFIG[sd] = "imx8mm_evk_config,sdcard"
UBOOT_CONFIG[fspi] = "imx8mm_evk_fspi_defconfig"
UBOOT_CONFIG[mfgtool] = "imx8mm_evk_config"
SPL_BINARY = "spl/u-boot-spl.bin"

# Set DDR FIRMWARE
DDR_FIRMWARE_NAME = "lpddr4_pmu_train_1d_imem.bin lpddr4_pmu_train_1d_dmem.bin lpddr4_pmu_train_2d_imem.bin lpddr4_pmu_train_2d_dmem.bin"

# Set u-boot DTB
UBOOT_DTB_NAME = "fsl-imx8mm-evk.dtb"

# Set imx-mkimage boot target
IMXBOOT_TARGETS = "${@bb.utils.contains('UBOOT_CONFIG', 'fspi', 'flash_evk_flexspi', 'flash_evk', d)}"

# Set Serial console
SERIAL_CONSOLES = "115200;ttymxc1"

IMAGE_BOOTLOADER = "imx-boot"

BOOT_SPACE = "65536"

LOADADDR = ""
UBOOT_SUFFIX = "bin"
UBOOT_MAKE_TARGET = ""
IMX_BOOT_SEEK = "33"

OPTEE_BIN_EXT = "8mm"

# Add additional firmware
MACHINE_FIRMWARE_append = " linux-firmware-ath10k"