| Age | Commit message (Collapse) | Author |
|---|
|
This updates the kernel fork for the 4.9-1.0.x-imx branch, merges the
4.9.67 stable release on top of it and apply following changes:
- ARM: dts: imx6ull: include all needed definitions
- ASoC: sgtl5000: Allow LRCLK pad drive strength to be changed
- video: fbdev: mxsfb: honor native-mode
- video: mxsfb: simplify parsing
- dmaengine: Kconfig: Extend the dependency for MXS_DMA
- video: fbdev: mxsfb: fix pixelclock polarity
- video: mxsfb: add compile dependencies
- chipidea: make usb charger optional
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This merges the 4.1.15 2.1.0 GA release as well as the 4.1.42 stable
release.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Enable CONFIG_FHANDLE so that systemd can autostart
getty on serial interfaces like /dev/ttymxc*.
Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Fix warning:
WARNING: lttng-modules-2.8.0+gitAUTOINC+6e4fc6f36d-r0 do_package:
lttng-modules: no modules were created; this may be due to
CONFIG_TRACEPOINTS not being enabled in your kernel.
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This updates the kernel fork for the 4.1-2.0.x-imx branch, merges the
4.1.33 stable release on top of it and apply following changes:
- 3400244 net: fec: align IP
- e02ebf2 net: fec: enable RACC on imx6ul
- c9a9698 net: fec: remove QUIRK_HAS_RACC from i.mx27
- ed4cba2 net: fec: remove QUIRK_HAS_RACC from i.mx25
- 1623965 serial: imx: reduce irq-latency after rx overflow
- bf2698a rfkill-gpio: fix clk on/off
- 0413e28 rfkill-gpio: fix active levels which automatically invert when active low
- 8ea61b8 rfkill-gpio: add devicetree support
- aed9a42 ARM: dts: imx7s-warp: Enable BT_REG_ON
- 955eb6f ARM: dts: imx7s-warp: Add Wifi support
- d120646 ARM: dts: imx7s-warp: Move memory node
- 82b8823 ARM: dts: imx7s-warp: Enable crypto
- e0a52d3 ARM: dts: warp7: Rename the dts file
- 9283aff ARM: imx_v7_defconfig: Add simple card driver support
- 48186c5 sgtl5000.c: HACK, defer probe when I2C not yet running
- 4759947 ARM: dts: imx7d-warp: Add audio support
- fe4d4c7 ARM: dts: imx7d: Add #sound-dai-cells into sai nodes
- 94de584 ARM: dts: imx7d-warp: Add BC3770 support.
- 8791ec9 ARM: dts: imx7d-warp: Enable bluetooth device
- 99059df ARM: dts: imx7d-warp: Add User Button support
- 6f50d90 ARM: dts: imx7d-warp: Add NFC support
- 68aafc4 ARM: dts: imx7d-warp: Add support for precision altimeter
- cacc687 ARM: dts: imx7d-warp: Add support for accelerometer and magnetometer
- ff609f7 ARM: dts: imx7d-warp: Add I2C4 device node, princtrl
- b21d979 of: Allow NXP 4.1 kernel to allocate memory on 2GiB RAM boards
- 67bebf9 ARM: dts: imx7d-warp: Add initial support
- 5bc7305 MLK-13243: arm: imx6q: busfreq: lpddr2 fix system clocks audio mode
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
There are currently two driver implementations for the MPL3115:
- drivers/input/misc/mpl3115.c (from NXP kernel)
- drivers/iio/pressure/mpl3115.c (from upstream kernel).
Use the CONFIG_MPL3115 instead of CONFIG_INPUT_MPL3115 because this driver
uses the Industrial I/O framework, which is the preferred and standard
subsystem for sensors.
The data from this sensor can be read by using the following commands
on a warp7 board:
cat /sys/bus/iio/devices/iio:device0/in_pressure_raw
cat /sys/bus/iio/devices/iio:device0/in_temp_raw
Signed-off-by: Breno Lima <breno.lima@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Select CONFIG_SND_SIMPLE_CARD driver by default.
warp7 board needs this driver for audio to work.
Signed-off-by: Breno Lima <breno.lima@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This merges the 4.1.15-1.2.0 GA release onto the Linux FSLC fork. It
includes following changes:
77f6154 MLK-12948 ARM: dts: imx7d-sdb: change the hardware reset gpio for mipi dsi
042fabd MLK-12946 media: pxp-v4l2: correct the 32 bpp pixel format passed to pxp
801b839 mmc: mmc: fix switch timeout issue caused by jiffies precision
38ed99e mmc: core: fix __mmc_switch timeout caused by preempt
c6c8f8d MLK-12934-2 mmc: sdhci-esdhc-imx: do not touch other bit when config DTOCV
6905ad8 MLK-12934-1 mmc: sdhci-esdhc-imx: correct the max timeout count
a7f1dc6 MLK-12944 fix makefile miss imx7d-12x12-lpddr3-arm2-pcie.dtb
470f930 MLK-12935 ARM: imx: switch system counter clock to 32K in suspend
d86edca MLK-12902: usdhc: Revert "MLK-11685-5 mmc: sdhci-esdhc-imx: no need busfreq for imx6qdl"
fc72198 MLK-12899-2 video: mipi_dsi_samsung: add panel 'TFT3P5581' driver.
e01451b MLK-12899-1 ARM: dts: imx7d-sdb: add dts support for panel 'TFT3P5581'.
9a38200 MLK-12901-3 video: mipi_dsi_samsung: alwasy use video mode to transfer data and cmds.
c88b735 MLK-12901-2 video: mipi_dsi_samsung: add 10msec delay after all the pkt write operation.
f154b5e MLK-12901-1 video: mipi_dsi_samsung: correct the hardware reset calling position.
30b8226 MLK_12886-2 video: mxsfb: handle the assert gpio in driver to support deferred probe
f0fdb61 MLK-12886-1 ARM: dts: imx7d-sdb: the assert gpio for lcdif should be active low
c1d7c35 MLK-12898: ov5640 mipi: Add more delay to wait sensor stable
bbe0e5a MLK-12880 arm: dts: imx7d: correct the PAD_GPIO1_IO01 pin ctrl setting
c29dda8 MLK-12876: mipi csi: Remove regulator enable code when driver probe
d95d2e8 MLK-12860-4 usb: chipidea: imx: add HSIC support for imx7d
abc9926 MLK-12860-3 ARM: imx: gpcv2: add reg_1p2's notifier
85d2f3f MLK-12860-2 ARM: dts: add imx7d 12x12 ARM2 ddr3 board dts
b104675 MLK-12860-1 ARM: dts: imx7d: add vcc-supply at gpc node
e28ae27 MLK-12861-2 ARM: imx: enable necessary clock for RDC resume on i.mx7d
02a2e8d MLK-12861-1 ARM: imx: support runtime clock management on i.mx7d when M4 is enabled
059449a MGS-1851 [#2332] fix the integer id resource leak
7b3c314 MLK-12795 pinctrl: imx: fix initialization of imx_pinctrl_desc
1c60143 MLK-12781 ARM: dts: imx7d-12x12-lpddr3-arm2: add pinctrl for usb vbus
aca1386 MLK-12695 dma: pxp-v2: fixing the mismatch calls of pm_runtime suspend/resume
3455774 MLK-12669-2 dma: pxp-v3: add 'ipg' and 'axi' clocks
9e04de3 MLK-12699-1 ARM: imx7d: clk: add two clocks definition for pxp
2b25e7d MLK-12622: mtd: gpmi: fix the issue in legacy bch support
c479a94 MLK-12602: Documentation: gpmi-nand: legacy bch geometry option for NAND
5102a01 MLK-12601: mtd: gpmi: provide the option to use legacy bch geometry
30c1b15 MLK-12421 usb: chipidea: fix build warning if disable CONFIG_USB_CHIPIDEA_HOST
a49b611 MLK-12509-3 video: mipi_dsi_samsung: add build support for TFT3P5079E panel.
0038221 MLK-12509-2 video: mipi_dsi_samsung: add 'TFT3P5079E' panel driver.
e3a5bdf MLK-12509-1 video: mipi_dsi_samsung: create a new dts for mipi dsi.
83f0dd3 MLK-12449: mtd: gpmi: fix integer overflow issue
4198b7b MLK-12448: mtd: gpmi: fix nand double free issue
8b38103 MLK-12371: ARM: imx: suspend-imx7: correct HW_ANADIG_SNVS_MISC_CTRL set
5db98a4 MLK-12420 fix potential head list corruption.
e6ea96a MLK-12731-2 ARM: dts: Makefile: add dts entry for imx6q-arm2-hsic
b1e060d MLK-12731-1 usb: chipidea: imx: add missing HSIC initialization for imx6qdl/sl
3268392 MLK-12688-02: arm dts: Add csis-clk-settle property
9504f74 MLK-12688-01: mipi csi: Add clk_settle setting
517f750 MLK-12432-03: arm: dts: Replace ov5647 mipi sensor with ov5640
488fd31 MLK-12432-02: capture: Add support for mipi input
c02abe7 MLK-12432-01: ov5640 mipi: support more platform and reduce support mode
9f0881f MLK-12763 ARM: imx7d: iomux: correct uart input sel option value
07c9f26 MLK-12765 ARM: imx: make sure DLL is locked on i.MX7D
a38a53d MLK-12748-3 ARM: imx: adjust imx7d lpddr3 retention exit flow
adfc24c MLK-12748-2 ARM: imx: remove IOMUXC GPR setting for i.mx7d TO1.2
07184c5 MLK-12748-1 ARM: dts: imx7d: correct usdhc1 cd pin setting
8ad5988 MLK-12761 ARM: imx: add mu as wakeup source for i.mx7d
cf0a95b MLK-11262-5: ARM: imx: Change A7 MU ready timing
Change-Id: Id25f069f639654a104bcd17c5b354335b95e7d64
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The Vivante GPU is used as kernel module for all i.MX6, by default, so
the defconfig should not enable it as other SoC (as i.MX6UL and
i.MX7D) uses the same defconfig and does not have the Vivante GPU.
This avoids the built-in driver build for other SoCs, thus fixing a
build error with GCC 6, which is hidden when using the external
module.
Change-Id: Ib12cfe494d75b6407eaf72c386094cc03606c7f8
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This updates the kernel fork for the 4.1.15-1.0.0 GA and merges the
4.1.20 stable release on top of it.
Up to now, no extra fixes are applied on top of it but this is likely
to change as vendors start to base their work on this tree.
Change-Id: I2f7c330b35f7bf2ae916b84147e445b28cb8e829
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The FSLC kernel fork has been updated for the 3.14-1.52-1.1.0 GA
release. It is a consolidated release covering all i.MX active product
lines covering:
- i.MX6QDL
- i.MX6SL
- i.MX6SX
- i.MX6UL
- i.MX7D
The patch also updates the linux-fslc-imx-rt flavour for the very same
kernel fork and ensures people uses the built-in Vivante GPU driver,
when using the Linux RT support, as the external kernel module does
not support it yet.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
Stefan Agner
Otavio Salvador
Tom Hochstein
Fabio Berton
Breno Lima