Age | Commit message (Collapse) | Author |
|
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This includes the following change:
a631182 warp7: update defconfig to support the generic loading interface
Signed-off-by: Pierre-Jean TEXIER <texier.pj2@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Without this, bitbake use the default one, and not "u-boot-fslc-fw-utils".
This was observed when layer is used together with poky (with Mender).
Signed-off-by: Pierre-Jean TEXIER <texier.pj2@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This pkg will not be supported anymore
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
*This pkg will not be supported anymore.
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
*ppa build support OPTEE-OS parameter.
*Building PPA source with OPTEE-OS
*add ppa-optee recipes
*update to e564143
e564143 - Adding 'execute' bit to gen_spd_its file mode
a0e0479 - QPPA-34 Fix to resolve the 4.4 Kernel 32bit bootup issue.
3107360 - Initializing TZASC after EL3 cache maint ops; Setting OCRAM to secure access only when EL3 stacks are in OCRAM.
db509c5 - Initializing smc global data region;Making data-in-ocram the default.
48ccba3 - Cleaning up code fix for QLINUX-8590.
c1e2177 - Bringing TZASC Enablement under CONFIG_SPD compile time flag.
fac778a - Enable LPM20 on LS2088A
5be38ad - Fix for ls1026ardb/ls1023ardb board boot up issue on dash-lts 4.9 kernel. JIRA Ticket QLINUX-8590
eb40915 - Adding support for LS1012 Freedom board.
833f749 - Fix for launching 32-bit kernel when OpTee is loaded.
75e9909 - Added TZC-380 & TZC-400 drivers for LS1043 and LS1046.
f2eecde - Add proper checking for Trusted-OS vector-table.
24ecac4 - Enable PSCI-CPU-ON notification for trusted-OS.
a9a6f4d - Fix in SPD for Coverity issues in TX1.0 release.
b2979b5 - Disabling and re-enabling SEC on entry/exit to LPM20 on LS1088.
b31c991 - Fix defect inserted into _zeroize_bss() during last commit.
3f83fd1 - Changed name of ddr/spd.c to spd_ddr.c to prevent filename collision with spd/spd.c.
59acbe2 - Fixing LSCH macro usage in timer.c.
030a2d7 - Adding SD/eMMC driver.
46016e6 - Added functions _getGICC_BaseAddr() and _getGICD_BaseAddr() to ls1012.
1f804e6 - Fixed handling of ls1043/ls1046 gic base address.
7e8df4f - Supplying the start address to _relocate_rela() and _zeroize_bss() functions.
dc36a4e - Resequencing the startup code for ddr and non-ddr builds. Fixed handling of input parameters to _ppa_main().
52f6c8b - Cleanup monitor code.
bdd2e61 - Adding temporary stack to bootcore before ppa_main() is called.
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
*include the following changes:
b79fe4b - config: add descriptions to DPCs and DPLs
cc37a9c - config: convert files from dos format to unix
8b3fe8c - config: update source files to match release LSDK-17.09
5b25be0 - config: update source files to match release LSDK-17.06
01a71bb - config: update source files to match LSDK-17.06-EAR
06dda1d - config: add source files for DPLs and DPCs
86da1cf - initial commit
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
*include the following changes:
bf3ae3c - armv8:LS1012A: Add support for LS1012A-2G5RDB board
e84010a - rcw: remove source files of SoCs
69104c3 - LS1012: Change header location in rcw for Secure Boot
43c79c9 - rcw: ls1088aqds: Add RCW PBL_QSPI_1600_700_2100_0x15_0x0d.bin
6719b04 - Ls1043a: add workaround for pcie errata A-009859
1a6236a - LS1012ARDB: Change rcw for secure boot
cdf4b72 - rcw: ls1088aqds: Add SCSI errata for detecttion of sata
16072f7 - armv8:LS1012A: RCW supporting 1GHz CPU frequency
90aef03 - LS1088ARDB:Reduce size in block copy command
53518dc - rcw: ls1088ardb: Add SCSI errata for detecttion of sata
0a869b3 - ls1021a: add workaround for pcie erratum A-007997 and A-007815
e7f18e5 - ls2088ardb: Add RCW for with platform frequency 700MHz
6f324fc - Use BSD license for both rcw and binary files
c69799f - Added copyright to byte_swap.tcl
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The new name is much more consistent with what this actually means. We put
the pieces in place to rename everything a while back but looks like we
forgot to actually do it! Fix that now.
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
*include the following changes:
cbd5e66 - T2080: add workaround of errata A-008851
13c95e2 - rcw: remove binary files of SoCs
69104c3 - LS1012: Change header location in rcw for Secure Boot
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
*include the following changes:
9f7df1b - env: sf:Enable environmnet varibale before relocation
840a903 - board/ls2080a, ls1088a: Add check for mc-dpl applied in fdt
208b0b6 - armv8: ls1088 : MC alignment should always be fixed to 512MB
6dd3af0 - ls1012a:dts: Correct LS1012A-2G5RDB device tree
d7ca121 - armv8: layerscape: Discard the needless cpu nodes
69620c9 - armv8: ls1043a/ls2080a: check SoC by device ID
196d773 - armv8: ls1088ardb: support force SDHC mode by hwconfig
68218ae - LS1012ARDB Secure Boot: Add encapsulation support
90a096f - armv8: ls1046aqds: update IFC NOR timings
212917d - drivers: net: pfe_eth: Disable autonegotiation for 2.5G SGMII
77c795d - board: freescale: ls1012a: LS1012A-2G5RDB board support
51c350b - armv8/kconfig: Align boards of same family at one place
6adcdca - driver: fsl-mc: MC object cleanup when DPL not loaded
4b02c65 - powerpc/p1_p2_rdb_pc: Fix endian access issue on EHCI intinalization
bbc95ad - powerpc/T104xRDB: Fix endian access issue on EHCI intinalization
5857001 - boards: ls1046ardb: disable unavailable "ethernet" node in dts
86682f0 - arm: Add support of updating dts before fix-up
df8d00c - common: Fix-up MAC addr in dts by fetching env variable serially
75045a7 - fsl-qbman: Include missing function prototype
269953a - driver: net: fsl-mc: flib changes for MC 10.3.0
813486a - drivers: net: pfe_eth: remove unused code under CONFIG_PFE_WARN_WA
fdf2bf4 - drivers: net: pfe_eth: remove unused code under CONFIG_UTIL_PE_DISABLED
44c39f0 - drivers: net: pfe_eth: cleanup typos and indent
5dc8c93 - drivers: net: pfe_eth: use writel/readl to access hw bds
8dc0a63 - drivers: net: pfe_eth: add pfe_rx_done to clear bd after packet processing
85a3451 - usb: Add delay to fix USB 2.0 stick enumeration failure on LS208xA
139ec62 - Revert "armv8: ls1088a: correct pcie fixup compatible string"
7bd0db8 - SECURE BOOT: Add SD fall back option
2068345 - cmd: mac: Update description of help
b040e4a - armv8: fsl-layerscape: Add support of disabling core prefetch
f53d786 - armv8: fsl-layerscape: Allocate Secure memory from first ddr region
8e9a95e - u-boot: fixup the iommu-map property of fsl-mc node
a95797b - armv7: ls1021a: Fix marco CONFIG_LS102XA
c249f5f - ls1088aqds: Add CONFIG_SGMII_PHYLIB in header file for QDS
64169db - armv8: ls1088: introduce CONFIG_SGMII_PHYLIB
002dc70 - driver: net: ldpaa_eth: Add PHY-less SGMII support
44a294b - drivers: net: ldpaa_eth: Correct error handler for qbman_swp_acquire()
0ca9091 - armv8: fsl-layerscape: Fix MC reserved memory calculation
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
There was a wrong include of u-boot.inc on this recipe which were
causing build errors, also it was using the old target to build the
environment tools.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This includes following changes on top of 2017.11 tag:
ca0c3f3fac configs: icore-rqs: Enable falcon mode
c39e5ad9ad engicam: imx6q: Return mmc dev 0 for icore
7953884755 i.MX6: engicam: Add imx6q/imx6ul boards for existing boards
924ac4a9ac board: icore-rqs: Fix mmc get env device
1caace2d74 i.MX6UL: icore: Add SPL_OF_CONTROL support
655f153b7c pinctrl: imx6ul: Fix pinctrl data overlapped with DT area
735b8429cf i.MX6Q: icore: Add SPL_OF_CONTROL support
e2aee01772 i.MX6Q: icorem6: Move spl load fit to common/spl
7265424b4b i.MX6: engicam: Move set_fdt_file to common
676484d0f5 mx6sxsabresd: Use PARTUUID to specify the rootfs location
c685436fb6 imx: Remove boolean parameter from wdog powerdown function
dfd399d4b2 imx: Also clear powerdown enable bit for WDOG3 on i.MX6ULL
21e5b103ee mx6ull: Fix WDOG3 base address
28a06c12ca envtools: make sure version/timestamp header file are available
5a3afcb579 mx6sabreauto: Remove unneeded SPL selection
a80c8e3c7a mx6: Select MX6QDL option via Kconfig
7c9d795887 mx53: Add Board support for GE PPD
a7dbf3c3a4 board: ge: make VPD code common
fd7ab796b5 rtc: add support for s35392a
efc51f73e3 bootcount: add support for bootcounter on EXT filesystem
8b0c1c4d23 arm: mx5: Add more register definitions
29e5e9df46 pwm: imx: Enable PWM support on i.MX53
02cc3e8037 ext4: recover from filesystem corruption when reading
4c530ec27c imx: mxc_i2c: tweak the i2c transfer method
87d4563bbd Revert "wandboard: Remove unnecessary delay"
913c93d432 pico-imx6ul: Use FS_GENERIC load command
bd7c72d0e2 pico-imx6ul: Add function to create gpt partitions
1bd87551eb pico-imx6ul: Define partition layout in the environment
6d2499a223 pico-imx6ul: Add boot and rootfs dfu_alt_info
114501165b pico-imx6ul: Use PARTUUID to specify the rootfs location
9a6f8019f6 pico-imx6ul: Move dfu_alt_info to CONFIG_DFU_ENV_SETTINGS variable
0b20df36bc mx25pdk: Change root to use a single partition layout
2dcd3eeeff pico-imx7d: Enable booting from single partition
d6008b2e1a pico-imx7d: Replace fatload command
7fe81082a3 pico-imx7d: Add support for secure boot
f960fe77df mx6sabre_common: Place video related settings in common code
f4998c99d4 mx6sabre_common: Dynamically change the video output
c3e252e8ca mx6sabresd: Enable video interfaces in bootargs
c94a211847 mx6sabresd: Use LDO dtb file until LDO bypass support is added
3abd094faf mx6slevk: Use LDO dtb file until LDO bypass support is added
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
*Deploy the binary in ls1012a/u-boot/ folder as it is standalone
The ppfe-firmware is a standalone tool, deploy the binary like
other images like u-boot/kernel/rcw.
*fix missing binary in ls1012a/u-boot/ folder
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
43c79c9 - rcw: ls1088aqds: Add RCW PBL_QSPI_1600_700_2100_0x15_0x0d.bin
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
c249f5f - ls1088aqds: Add CONFIG_SGMII_PHYLIB in header file for QDS
64169db - armv8: ls1088: introduce CONFIG_SGMII_PHYLIB
002dc70 - driver: net: ldpaa_eth: Add PHY-less SGMII support
44a294b - drivers: net: ldpaa_eth: Correct error handler for qbman_swp_acquire()
0ca9091 - armv8: fsl-layerscape: Fix MC reserved memory calculation
fbedf04 - armv8: Workaround for USB erratum A-009007 on LS1088A
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
*update SRC_URI
*update to 97cd13d
include the following changes:
97cd13d - DNCPE-372 Add ls1012a sbl firmware itb
4089bcf - DNCPE-372 Update binary files
4943138 - DNCPE-372 Update binary files
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
*include the following changes:
fbedf04 - armv8: Workaround for USB erratum A-009007 on LS1088A
07dce79 - board: freescale: ls1012a: fix RGMII tx delay issue
39bd068 - armv8: ls1088aqds: Change phy mode to PHY_INTERFACE_MODE_RGMII_ID
aad3422 - armv8: configs: ls1012a: correct the generic timer frequency issue
0f0e241 - configs: ls1012a: add pfe configuration for LS1012A
a518a57 - fsl: csu: enable ns access for PFE
d91e382 - armv8: fsl-lsch2: configure pfe's scfg & dcfg registers
99089ae - armv8: fsl-lsch2: add pfe macros and update ccsr_scfg structure
7b2f1c3 - armv8: fsl-lsch2: initialize pfe gemac
f0640ed - board: freescale: ls1012a: enable network support on ls1012a platforms
af5f822 - drivers: net: pfe_eth: LS1012A PFE headers
676ef26 - drivers: net: pfe_eth: provide pfe commands
74b6833 - drivers: net: pfe_eth: LS1012A PFE driver introduction
3ddb3d3 - armv8: fsl-layerscape: Add support of GPIO structure
091c401 - driver: fsl-mc: memset pointers after malloc
4dcd33d - armv8: ls1088a: Update MC boot sequence
2dcba27 - arm64: ls2088ardb: Fix nor fall back option failure
c64ac4c - QE: Set QE_IRAM_READY after uploading firmware
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
*include the following changes:
6719b04 - Ls1043a: add workaround for pcie errata A-009859
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The runtime provides does need to be changed as it is going to be
handled by the shlib symbol handling during the package
generation. This fixes the package generation of libvpu4 which were
causing rootfs generation errors when using Debian packages.
Reported-by: Daiane Angolini <daiane.angolini@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Change the git URL to Code Aurora as it mirrors the git.freescale.com.
It also changes the branch name to the matching one.
Signed-off-by: Daiane Angolini <daiane.angolini@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Change the git URL to Code Aurora as it mirrors the git.freescale.com.
It also changes the branch name to the matching one.
Signed-off-by: Daiane Angolini <daiane.angolini@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Change the git URL to Code Aurora as it mirrors the git.freescale.com.
It also changes the branch name to the matching one.
Signed-off-by: Daiane Angolini <daiane.angolini@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
*This includes the following changes:
503eff0 - armv8: ls1046aqds: Fix NAND offset for Fman ucode and env
c66ddf7 - arm64: ls2088ardb: Fix kernel validation failure
44ffe98 - armv8: ls1043ardb: disable PPA loading during SPL stage for SD boot
043c85a - armv8: ls1046ardb: disable PPA loading during SPL stage for SD boot
b68c991 - armv8: fsl-layerscape: Fix some coding style problems in soc.c
25cd705 - board/ls1088: Add fsl_fdt_fixup_flash
85bfc58 - ls1088aqds: Enable IFC and QIXIS in SPL image
96cc4d7 - armv8: fsl-layerscape: Add back L3 flushing for all exception levels
bdf9c1a - fsl-lsch2: csu: correct the workaround A-010315
26aaf13 - armv8/fsl-lsch2: correct QMAN clock
a836f94 - arm64: ls1012ardb: Add distro secure boot support
ef3b345 - arm64: ls1012afrdm: Add distro boot support
2bed40e - arm64: ls1012ardb: Add distro boot support
bb85ef3 - board: common: vid: Move IR chip specific code in flag
806bca8 - board/ls2080ardb: Add mcmemsize variable in default env
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
*update to 1a6236a
*This includes the following changes:
1a6236a - LS1012ARDB: Change rcw for secure boot
cdf4b72 - rcw: ls1088aqds: Add SCSI errata for detecttion of sata
16072f7 - armv8:LS1012A: RCW supporting 1GHz CPU frequency
90aef03 - LS1088ARDB:Reduce size in block copy command
53518dc - rcw: ls1088ardb: Add SCSI errata for detecttion of sata
0a869b3 - ls1021a: add workaround for pcie erratum A-007997 and A-007815
e7f18e5 - ls2088ardb: Add RCW for with platform frequency 700MHz
6f324fc - Use BSD license for both rcw and binary files
c69799f - Added copyright to byte_swap.tcl
bfe8c5e - Renaming COPYING as BSD-LICENSE
*update LIC_FILES_CHKSUM to point to LICENSE
Renaming BSD-LICENSE
* add support for Qoriq.
* strip possible '-32b', '-64b' and '-be' to match folder name.
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
* ls2-rcw and rcw are duplicated so remove ls2-rcw.
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
*update SRC_URL and update to 6036a20
includes the following changes:
6036a20 - Add ucode and readme for Cortina 10G PHY
*update license to MIT
*Fix the installation directory
ls2-phy includes one config file.
Signed-off-by: Chunrong Guo <B40290@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
*include the following changes
a812f17 - ls1046ardb: update binary
2d42308 - ls2088ardb: update binary
e8b5d47 - LS2088ardb: update to c1ae7b72
bd59c46 - update binaries for LSDK 1709
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
*update to 92b208b
This includes the following changes:
92b208b - Added usb and mmc as wakeup src for LS1088 system suspend; Fixed stack alignment issue.
999e6be - Correcting stack reference issue in LS1088 _soc_sys_entr_pwrdn().
4d43c10 - Adding cpu_suspend.system support to LS1088.
8a2e7ee - Disambiguating uart driver from ddr driver and from dbg builds.
d455113 - Fixing offset into bootcore data area.
87b117e - Moving Chassis defs out of soc.h and into lsch3/lsch2.h.
93f17b3 - Releasing cores from reset that are marked "to be disabled".
2872682 - Fixing ordering problem in makefile.inc which caused builds using earlier than GCC 6.2 to fail.
f52a4a9 - Adding separate folders for each driver; Adding rdb board for LA17xx.
b003ea1 - Adding initial ppa for soc LA17xx.
ce7f372 - Changing secondary core release method to reduce risk of race condition between ppa and bootrom.
78b8281 - Fixing psci data area initialization.
bed0d04 - Eliminating race condition between psci and bootrom on core release.
89ddb56 - Cleanup of prefetch disable function.
8781337 - Fix for QPPA-23: overwriting saved link register in _soc_init_start when bootcore used to initialize ocram.
4ee3738 - Adding header file left out of last commit.
cc33e5e - Adding smc function prefetch disable.
2de51a3 - Changing psci call to _soc_core_rls_wait into a call to _soc_core_release.
12be3c6 - Updating text in license file.
76a61f5 - Added release note deprecating build methods using "make".
*fix the below error:
|Makefile:58: ../armv8/gic.mk: No such file or directory
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
* nxp release will not support ppc machine
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
- As imx-test git repository is public as git://git.freescale.com/imx/imx-test.git,
build it from git.
- Add support to i.MX 6SLL and 7ULP.
- Replace imx-vpu with virtual/imxvpu in DEPNEDS.
- Set PV as 6.0+${SRCPV}
Signed-off-by: Jun Zhu <junzhu@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
- Add virtual/imxvpu provides for the future VPUs on other SoC.
- Integrate the bug fixes.
Signed-off-by: Jun Zhu <junzhu@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
- As the imx-lib git repository is public as git.freescale.com/imx/imx-lib.git,
build it from the git.
- Add support to i.MX 6SLL and 7ULP.
- Set PV as 5.8+${SRCPV}
Add the options to support i.MX 6SLL and 7ULP
Signed-off-by: Jun Zhu <junzhu@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This includes following changes:
a6a15fedd1 udoo: Remove cpu type check prior to setup_sata()
25aa0ce98a wandboard: Remove cpu type check prior to setup_sata()
6c94a45c23 wandboard: Add support for the MX6QP variant
46800a79b6 mx6slevk: Fix MMC breakage for the SPL target
3760ecfce4 imx: Fix regression with CONFIG_DM_MMC=y
59d4771838 ARM: imx6: Add DHCOM i.MX6 PDK board support
a77a794847 imx: mx7: spl: remove redundant SATA definitionas
fdb70bf620 mx6: sys_proto: Add prototypes for imx6_pcie_toggle() functions
308e7844f8 mx6: clock: Add a prototype for do_mx6_showclocks()
300a095165 i.mx6ul: xpress: update UART init for current board revision
2812798091 mx6slevk: Use PARTUUID to specify the rootfs location
acea9a74c8 drivers: pci: imx: fix imx_pcie_remove function
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Jun Zhu <junzhu@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
- Use the same EXTRA_OEMAKE and do_compile task that u-boot-mkimage
from OE-Core
- Rework do_install task
- Recipe depends only of openssl, no need to append DEPENDS variable
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
- u-boot-msxboot doesn't use recipes-bsp/u-boot/u-boot.inc, so
require this file only in recipes that use it.
- Compatible machine and package arch are needed only for
u-boot-fslc, once u-boot-fw-utils has cross class and u-boot-mxsboot
has native class.
- Add description in u-boot-fslc recipe
- Drop unused depends for mxs. We don't need to use elftosb, mkimage
can generate an BootStream for i.MX23 and i.MX28. See u-boot-fslc
commit 6654f33c9b520bd4073c7f82a13044e79bc1489.
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This includes the following changes:
977c60b153 Revert "wandboard: Set fdt based on board_rev and board_name"
e439122438 wandboard: Add support for the latest revd1 revision
ada0d28cb4 doc: update imx_usb_loader URL
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This includes the following changes:
- 0edf2007c6 arm: imx7d: add support for Compulab cl-som-imx7
- f62d34202d imx: mx7: SPL support for i.MX7
- b4ee050163 imx: mx7: DDR controller configuration for the i.MX7 architecture
- 9ad01a2efb imx: mx7: fix the CCM_ macros
- 23a60cfbec icorem6_rqs: env: Return mmc devno
- 4a8723b299 icore: configs: Fix merge conflict issue
- 48e0c40604 topic_miami: Remove CONFIG_CMD_BOOTZ undef
- 19cdefc994 mx6sabresd: Include <usb/ehci-ci.h> header file
- 9b1dd35df2 usb: ehci-ci: Add a prototype for board_ehci_power()
- 23e7d7d1c6 mx6sabresd: Include <asm/mach-imx/spi.h> header file
- 916afc51de mx6: soc: Include <asm/bootm.h> header file
- fc7dc87a9f mx7ulp_evk: Move CONFIG_CMD_BOOTZ to Kconfig
- 96fd173ca1 imx: sys_proto: Add a prototype for board_mmc_get_env_dev()
- e6e4db4473 imx: Include <input.h> header file
- cbc14ee959 mx6: toradex: Remove custom CONFIG_SPL_PAD_TO definition
- c6cbcda3de README.imx6: Prefer loading SPL via the new SDP mechanism
- d327aab07f mx53loco: Let CONFIG_DISPLAY_CPUINFO be selected
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Use a common file to make easier update, maintain and create
others U-Boot recipes like U-Boot fw-utils.
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|