aboutsummaryrefslogtreecommitdiffstats
path: root/conf/machine/imx6sxsabresd.conf
AgeCommit message (Collapse)AuthorFilesLines
2019-02-08Stop using SERIAL_CONSOLE and switch all boards to SERIAL_CONSOLESMarc Ferland1-1/+1
SERIAL_CONSOLE has been deprecated for a while now (see [1]). This patch fixes the machines that where still using the old variable. [1]: https://www.yoctoproject.org/docs/2.7/ref-manual/ref-manual.html#migration-2.6-serial-console-deprecated Signed-off-by: Marc Ferland <ferlandm@amotus.ca> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2017-10-05machines: fix dtb build failure when use-mainline-bsp is usedHiraku Toyooka1-0/+1
When the use-mainline-bsp is used, dtb files listed in KERNEL_DEVICETREE are different from ones to be build, so the build fails. This patch fixes it by adding KERNEL_DEVICETREE_use_mainline_bsp. Signed-off-by: Hiraku Toyooka <hiraku.toyooka@cybertrust.co.jp> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2017-07-13u-boot-fslc: Upgrade to 2017.07-based releaseOtavio Salvador1-1/+8
This release provides a huge improvement regarding the support for SPL to more boards. We now uses this and migrated following boards: - imx6qpsabresd -> imx6qdlsabresd - imx6qsabresd -> imx6qdlsabresd - imx6dlsabresd -> imx6qdlsabresd - imx6solosabresd -> imx6qdlsabresd - imx6qpsabreauto -> imx6qdlsabreauto - imx6qsabreauto -> imx6qdlsabreauto - imx6dlsabreauto -> imx6qdlsabreauto - imx6solosabreauto -> imx6qdlsabreauto So now, the 8 boards are covered by 2 machine files. This drastically reduces the build time and allow for a better user experience as we can use the same image to test different boards. In summary an image built for imx6qdlsabresd or imx6qdlsabreauto is capable of run on a its respective board which contains a i.MX6 QuadPlus, Quad, Dual, DualLite or Solo SoC removing the need of a specific image for each SoC type. On top of the official 2017.07 release, following patches are included: 801fd44563 mx6sabreauto: Make Ethernet functional again 8ccb1970b8 wandboard: Set fdt based on board_rev and board_name e6605743e5 mx6sabresd: Enable video interfaces in bootargs e50a2475d4 mx6sabresd: Use LDO dtb file until LDO bypass support is added b1a4715311 mx6slevk: Use LDO dtb file until LDO bypass support is added 957409876b imx: cx9020: try pxe boot, if no vmlinuz on mmc 3608315bf1 imx: cx9020: use fdt_addr_r and ramdisk_addr_r 9a1c960516 mx6sabreauto: Add Falcon mode support 3a279e5fe8 warp: Use PARTUUID to specify the rootfs location 0f9a6703e7 embestmx6boards: Use PARTUUID to specify the rootfs location c877510614 mx6cuboxi: Use PARTUUID to specify the rootfs location 0ada2d6caf wandboard: Use PARTUUID to specify the rootfs location eee442362c mx6sabre: Use PARTUUID to specify the rootfs location 80a56615fa mx6sabreauto: Do not enable WEIM by default 321339efd7 imx: reorganize IMX code as other SOCs 1567ce3edc mmc: fsl_esdhc: drop CONFIG_SYS_FSL_ESDHC_FORCE_VSELECT 40294f880d dm: mmc: fsl_esdhc: handle vqmmc supply 0378edcd02 mmc: fsl_esdhc: introduce vs18_enable for 1.8V fix I/O 3657cae890 mmc: fsl_esdhc: correct type of wp_enable 45103e1030 imx6_spl: Add u-boot-dtb.img for SPL payload 61131fa4b5 mx6sabreauto: Update to SPL only mode 07a667be9b mx6qsabreauto: Add SPL support 4506c859ee mx6cuboxi: Add support for sata a5c5962327 mx7dsabresd: Set VLD04 output to 2.8V in PMIC initialization. 4590f11b61 mx6: soc: Move mxs_dma_init() into the mxs nand driver 10d185960e net: fec_mxc: fix PHY initialization bug with CONFIG_DM_ETH b2d4bf303e icorem6_rqs: Rename icorem6_rqs config file af34708e1e dt-bindings: Document the Broadcom STB wake-up timer node 3e92667cfe serial: mxc: Add debug uart support 4e2b31a5c5 serial: mxc: Code cleanup 27835dae1a serial: mxc: Move common baud gen into _mxc_serial_setbrg 1ca9fe11fd serial: mxc: Move common init into _mxc_serial_init 14ac9d06be serial: mxc: Move cr1 and cr2 write to mxc_serial_setbrg fdd1f0debc serial: mxc: Use RFDIV in dm-code fd008b0569 serial: mxc: Add common mxc_uart reg space 2fd7878124 imx: mx6ull: fix USB bmode for i.MX 6UL and 6ULL 5c72de6152 ot1200: enable CONFIG_IMX_THERMAL for detailed thermal information 8e38f54c56 mx6sabresd: Fix guard file symbol 3320a872b0 wandboard: Remove unnecessary delay d5ae3ce6dd cm_fx6: Remove SPL entry from CONFIG_SYS_EXTRA_OPTIONS 1325b822da cgtqmx6eval: Remove SPL entry from CONFIG_SYS_EXTRA_OPTIONS 844365a5a0 mx6slevk_spl: Remove SPL entry from CONFIG_SYS_EXTRA_OPTIONS ff9e6d62ed mx6sabresd: Remove SPL entry from CONFIG_SYS_EXTRA_OPTIONS Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Acked-by: Daiane Angolini <daiane.angolini@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2017-01-23Update machine description fieldsAlexandra Safta1-2/+2
Change description fields from Freescale to NXP in machine files to align to 2016 corporate transfer to NXP. Signed-off-by: Alexandra Safta <alexandra-ioana.safta@nxp.com> Signed-off-by: Lauren Post <lauren.post@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2016-09-08Convert SOC_FAMILY to MACHINEOVERRIDESOtavio Salvador1-2/+2
The SOC_FAMILY is an indirection which makes the understanding, from OpenEmbedded versed developers and users, more difficult. Instead of using the SOC_FAMILY indirection which is rarely used, we now move to the MACHINEOVERRIDES mechanism as this is in fact what is in use. Change-Id: Ic6e58b79bdc990ac853c87761c3fff635786e4e5 Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2016-08-23machine: Change maintainer email to nxp.com for Lauren PostLauren Post1-1/+1
Signed-off-by: Lauren Post <lauren.post@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2016-04-19imx6sxsabresd: Add mqs sound support for the expansion boardLauren Post1-1/+1
MLK-11130: ARM: dts: add mqs support mx6sx-sd-exp1 board Signed-off-by: Lauren Post <lauren.post@freescale.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2016-04-19imx6sxsabresd: Add Murata BT/WiFi module supportLauren Post1-1/+2
Add Murata Type ZP (BCM4339) module support on below platforms: - i.MX6SX SDB (SD3+SD2 slot) + Murata adapter V1.0 & SD EXT card Signed-off-by: Lauren Post <lauren.post@freescale.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2016-04-19imx6sxsabresd: Add imx6sx-sdb-ldo.dtb device treeLauren Post1-1/+1
Support ldo-bypass mode on imx6sx-sdb board by default and add ldo-enable dts file. Signed-off-by: Lauren Post <lauren.post@freescale.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2015-07-28imx6sxsabresd: Remove UBOOT_ENTRYPOINTLauren Post1-2/+0
UBOOT_ENTRYPOINT set in imx-base.inc for i.MX 6SoloX. Signed-off-by: Lauren Post <lauren.post@freescale.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2015-07-16Move meta-fsl-arm content to layer rootOtavio Salvador1-0/+22
The meta-fsl-arm is going to be used as the base for this layer. It contains a clean history and allowing a more granullar set of changes. This commit is just a rename of all contents of meta-fsl-arm subdirectory to this layer's root, subsequent changes are based on top of that. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>