summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2016-05-07linux-fslc-imx-rt: Upgrade to 4.1.15-1.0.0 GA2.1Dominic Sacré
Use patch 4.1.19-rt22 (which applies cleanly) despite the fact that the kernel is currently based on 4.1.20, because 4.1.20-rt23 is not yet available at a stable URL. The same issues that needed to be patched in 3.14 are still present in 4.1, so update the patches and defconfig accordingly to apply to the new kernel. Signed-off-by: Dominic Sacré <dominic.sacre@gmx.de> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2016-05-07linux-fslc-imx: Bump revision to deb84cdOtavio Salvador
This merges the 4.1.23 stable release as well as NXP following changes: deb84cd MLK-12722: ASoC: fsl_spdif: clear the validity bit for TX 20de11d MLK-12607: ASoC: fsl-asrc: Add the support of 12kHz and 24kHz af2256b MLK-12464-2: ASoC: wm8960: fix clock is not correct after suspend/resume d51a5af MLK-12464-1: ASoC: fsl: imx-wm8960: Fix no clock after suspend/resume randomly efb83ff MLK-12620 ARM: imx: correct i.MX7D fuse MAC1_ADDR offset address a90438e MLK-12706-3 arm: imx_v7_defconfig: build in bcmdhd b361e5d MLK-12706-2 net: bcmdhd: set the bcmdhd driver default build in d60d208 MLK-12706-1 mmc: sdio: add sdio reset function for bcmdhd wifi 36a8f81 MLK-12705 ARM: imx: add support for i.mx7d TO1.2 busfreq c0433b1 MLK-12685 ARM: dts: imx6sx-sabreauto.dts: improve usdhc4 pad drive strength 92c7757 MLK-12675 ARM: dts: imx: keep RTC enabled for software poweroff c35a5dd MLK-12671 ARM: imx: support single soc config 3b2520f MLK-12617 mmc: Fix compile error when CONFIG_MMC=m d5d7c02 MLK-12623-03 ARM: imx: Add cpu speed grading check for imx6ul b1d1ba8 MLK-12623-02 ARM: dts: imx: Add 700MHz setpoint define in dts 7fe0d46 MLK-12623-01 cpufreq: imx: Add support for 700MHz setpoint in cpufreq a4d2a08 MLK-12277 media: camera: add check for width and height against 0 85a98a0 MLK-12573 ARM: dts: set LCD_nPWREN low to make VLCD_3V3 output 3V3. 3456a58 MLK-10934 mtd: use memcpy to replace the memcpy_fromio d410e45 MGS-1678 [#2269] memleak in GPU driver sysfs interface 160bf92 MA-7715 fix GPU kernel panic reported by android CTS 0e3d9b1 MGS-1630 5.0.11.p8 driver can't pass build with kernel 4.1 on Android M6.0 a52956f MLK-12466 ARM: dts: imx6ul-14x14-evk-usb-certi: add USB certification dts Change-Id: I91b274ccd29c9d52a274599d66e874fa474550bf Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2016-05-07imx-gpu-viv: Rework code so it is easier to readOtavio Salvador
Instead of using USE_X11 and USE_WL, we now use HAS_X11 and HAS_WL. The variable does not imply that the backend is actually used but if the distribution has, or not, the support for the backend. Change-Id: I8630b54ed0a80f2877e5e97f71ae14e78ed5aeea Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2016-05-07imx-gpu-viv: Remove dead codeOtavio Salvador
The support for X11 and Wayland is not intended to be added so we can remove the FIXME and the unused code. Change-Id: I18473c415dd8877f887d7dc719bfbb360007a29e Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2016-05-07libimxvpuapi: Update to version 0.10.2Carlos Rafael Giani
Changes: - fix AUD NAL positioning in h.264 encoder output (SPS/PPS/AUD were ordered incorrectly - AUD has to come first, not last) - fix build error with examples when --enable-static is used - pass quality factor in simplified JPEG encoder interface correctly - add functions for querying and setting header data useful for modifying headers, like VUI data in the SPS RBSP - documentation updates Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2016-05-07imx-test: Upgrade to 5.4.1 releaseLauren Post
- mmdc fixes to add 6ul support - mmdc fixes to add ipu2 and gpuvg support got i.MX 6QuadPlus - mx6s_v4l2_capture fixes for memory leak Signed-off-by: Lauren Post <lauren.post@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2016-05-07u-boot-imx: Update to 4.1.15-1.1.0 releaseLauren Post
Includes support for i.MX 6UltraLite T1.1 silicon. Signed-off-by: Lauren Post <lauren.post@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2016-05-07linux-imx: Upgrade to 4.1.15-1.1.0Lauren Post
Kernel updates for i.MX 6UltraLite T1.1 silicon. Signed-off-by: Lauren Post <lauren.post@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2016-05-07u-boot-imx: Change UBOOT_SRC to SRC_URI to fix fetch issuesLauren Post
Mistake in usptreaming 4.1.15-1.0.0 - should use SRC_URI instead of UBOOT_SRC Signed-off-by: Lauren Post <lauren.post@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2016-05-07imx-parser: Quiet 'already stripped' warningsFahad Usman
This patch helps to quite 'already stripped' warnings thrown during the build. Change-Id: Ie6977154571c9eceb51d3f6ff3665f667f4cc007 Signed-off-by: Fahad Usman <fahad_usman@mentor.com> Signed-off-by: Sujith Haridasan <Sujith_Haridasan@mentor.com> Signed-off-by: Sujith H <sujith.h@gmail.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2016-05-07linux-fslc-imx-rt: Fix URL for patch 3.14.61-rt62Dominic Sacré
Update the URL because patch-3.14.61-rt62.patch.gz got moved to the 'older' subdirectory. The -rt patches are published in the projects/rt/3.14 directory, and are then moved to projects/rt/3.14/older when the next version of the patch is released. Previous versions of this recipe intentionally used "older" patches (even when the latest one would apply) specifically because the URLs remain stable that way. This got broken in the update to 3.14.52-1.1.0 GA. Signed-off-by: Dominic Sacré <dominic.sacre@gmx.de> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2016-05-07imx-gpu-viv: correct file ownershipSujith H
This recipe copies binary files with `cp`, including `cp -a`, so the file ownership can end up being the same as the build user. Work around this by chown'ing everything to root:root. This avoids a package_qa failure. Signed-off-by: Sujith H <sujith.h@gmail.com> Signed-off-by: Christopher Larson <chris_larson@mentor.com> Signed-off-by: Sujith Haridasan <Sujith_Haridasan@mentor.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2016-05-07chromium-imx: Update dependency name of vpuwrapYuqing Zhu
libfslvpuwrap has been renamed to imx-vpuwrap, need to do update. Signed-off-by: Yuqing Zhu <carol.zhu@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2016-05-07imx-base: Update MACHINE_EXTRA_RRECOMMENDS and MACHINE_SOCARCH_FILTERYuqing Zhu
libfslcodec/ libfslvpuwrap/ libfslparser/ fsl-alsa-plugins have been renamed as imx-codec/ imx-vpuwrap/ imx-parser/ imx-alsa-plugins, need to do update. Signed-off-by: Yuqing Zhu <carol.zhu@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2016-05-07gstreamer1.0-plugins-imx: Update PACKAGECONFIGYuqing Zhu
libfslcodec has been renamed as imx-codec, need to update the PACKAGECONFIG. Signed-off-by: Yuqing Zhu <carol.zhu@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2016-05-07imx-gst1.0-plugin: Upgrade to v4.0.9Yuqing Zhu
--Change the recipe name from "gst1.0-fsl-plugin" to "imx-gst1.0-plugin" --Add RREPLACE/RPROVIDES/RCONFLICTS for backwards compatibility. --Remove dependency on gstreamer1.0-plugins-bad There is a patch in gstreamer1.0-plugins-bad which intall the header file of gstaggregator and gstvideoaggregator. so we can use them outside of gstreamer-plugins-bad package. Change-Id: I2440ffc17d2921b0dbae5b73c3fd3e9df3742af9 Signed-off-by: Yuqing Zhu <carol.zhu@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2016-05-07imx-codec: Fix backward compatibility with libfslcodecOtavio Salvador
The new recipe ought to remove the old one and provide the same recipe name. This ensures that old metadata is kept working. Change-Id: I5fe1b53e150c1fdd2c8c63895abf211810b4caa1 Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2016-05-07imx-codec: Upgrade to v4.0.9Yuqing Zhu
--Change the recipe name from "libfslcodec" to "imx-codec" --Add RREPLACE/RPROVIDES/RCONFLICTS for backwards compatibility. --[aac_dec] refine the code for pure c build aac decoder c build need float point support, which use some float point function. Change-Id: Ie8071031b45038107d27b16e2c129376cf4f109d Signed-off-by: Yuqing Zhu <carol.zhu@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2016-05-07imx-parser: Fix backward compatibility with libfslparserOtavio Salvador
The new recipe ought to remove the old one and provide the same recipe name. This ensures that old metadata is kept working. Change-Id: Icd6c8240cb063dede707c7b0bd1d256e46542cd2 Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2016-05-07imx-parser: Upgrade to v4.0.9Yuqing Zhu
--Change the recipe name from "libfslparser" to "imx-parser" --Add RREPLACE/RPROVIDES/RCONFLICTS for backwards compatibility. --Add aac latm parser in parser_libs, support aac latm in mpeg2 parser Change-Id: I2e3cb92a952fe10136c25206f1527ca1472598cc Signed-off-by: Yuqing Zhu <carol.zhu@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2016-05-07imx-alsa-plugins: Fix backward compatibility with fsl-alsa-pluginsOtavio Salvador
The new recipe ought to remove the old one and provide the same recipe name. This ensures that old metadata is kept working. Change-Id: I8c385676aba2b452ac661e308a0aed3badb4f298 Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2016-05-07imx-alsa-plugins: Upgrade to v1.0.26Yuqing Zhu
--Change the recipe name from "fsl-alsa-plugins" to "imx-alsa-plugins" --Add RREPLACE/RPROVIDES/RCONFLICTS for backwards compatibility. --Remove 0001-asrc_pair-update-output-buffer-size.patch as it has been integrated into the package. Change-Id: Id533118f7edbaa560b7a5e8afce4842e9a0971eb Signed-off-by: Yuqing Zhu <carol.zhu@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2016-05-07imx-vpuwrap: Fix backward compatibility with libfslvpuwrapOtavio Salvador
The new recipe ought to remove the old one and provide the same recipe name. This ensures that old metadata is kept working. Change-Id: Ib66c3e1078aa840903b568da09c9c8eae919cae9 Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2016-05-07imx-vpuwrap: Upgrade to v1.0.65Yuqing Zhu
--Change the recipe name from "libfslvpuwrap" to "imx-vpuwrap". --Add RREPLACE/RPROVIDES/RCONFLICTS for backwards compatibility. --Update 'nLastFrameEndPosPhy' in seqinit stage to avoid feed the same SPS to vpu repeatedly. Change-Id: I7dd9e7c2ab9806937d554ac16f37185d9e5f074b Signed-off-by: Yuqing Zhu <carol.zhu@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2016-04-19imx-base: Add MACHINE_GSTREAMER_1_0_PLUGIN for mx7 platformIan Coolidge
gstreamer1.0-plugins-imx was recently updated to be compatible with mx7 Signed-off-by: Ian Coolidge <ian@boundarydevices.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2016-04-19imx-kobs: Fix compiler error with Linux kernel headers version >= 4.4Gary Thomas
This patch fixes a build error with kernel includes (>= 4.4) <stdint.h> must be explicitly included to get uintX_t types. Change-Id: I3a0059a59bf578fdba0cf68370eec0e19fc10835 Signed-off-by: Gary Thomas <gary@mlbassoc.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2016-04-19mfgtool-initramfs-image.bbclass: Fix parsing when using a barebox based machineOtavio Salvador
When building for cfa100xx machines, for meta-fsl-arm-extra, the parsing is aborted with: ,---- | ERROR: No IMAGE_CMD defined for IMAGE_FSTYPES entry | 'barebox.mxsboot-sdcard' - possibly invalid type name or missing | support class | ERROR: Failed to parse recipe: | .../sources/meta-fsl-arm/recipes-fsl/images/fsl-image-mfgtool-initramfs.bb `---- This error was caused by the image not providing all the filesystem types as in fact it generates a Gzipped CPIO filesystem and does not inherit the default ones. To solve the error we ought to include the override for 'mxs' SoC family so the right setting is used as well in this set of SoCs. Change-Id: If6e657793ed7af07decac217f6b3371fad1f521c Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2016-04-19linux-mfgtool: Add DATETIME exclusion to avoid taskhash mismatch errorLauren Post
Recent changes in siggen.py check for task hash and generate build errors called Taskhash mismatch when using variables with date and time. Exclude date time variables as done in kernel.bbclass. Signed-off-by: Lauren Post <lauren.post@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2016-04-19imx-gpu-viv: Drop Floating Point type handlerOtavio Salvador
The new packages does not support Soft-FP and releases will be always in Hard-FP making the mechanism unused. Remove the dead code. Change-Id: I833dbc61d29fec947876743e6ba3fb2f2112abd7 Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2016-04-19kernel-module-imx-gpu-viv: Update graphics to 5.0.11-p8.3 versionTom Hochstein
Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2016-04-19xf86-video-imxfb-vivante: Update graphics to 5.0.11-p8.3 versionTom Hochstein
- Update version - Remove upstreamed patch Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2016-04-19imx-gpu-viv: Update to version 5.0.11-p8.3Tom Hochstein
Update Vivante graphics driver for i.MX Linux BSP L4.1.15-1.0.0_ga release. Software floating point is no longer supported. For a detailed list of changes in this update, see the Graphics section of the i.MX Linux Release Notes contained in the i.MX Linux BSP documentation here: https://www.nxp.com/webapp/Download?colCode=L4.1.15_1.0.0_LINUX_DOCS&location=null&fpsp=1&WT_TYPE=Supporting%20Information&WT_VENDOR=FREESCALE&WT_FILE_FORMAT=gz&WT_ASSET=Documentation&fileExt=.gz&Parent_nodeId=1337637154535695831062&Parent_pageType=product Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2016-04-19opencv: follow meta-oe to 3.1Andreas Müller
Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2016-04-19linux-fslc-imx: Update to latest version 445b81a7Daiane Angolini
Commit 445b81a7 adds the initial support for the Warp7 board. Signed-off-by: Daiane Angolini <daiane.angolini@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2016-04-19imx-test: Fix build for X11 backendOtavio Salvador
The root case of the addition of the dependencies on the recipe was that it were not being correctly included in the .inc file. This fixes it and remove the duplication. Change-Id: Ie9ee5fbc2a61915ce109473f5df2b8e88d3966c4 Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2016-04-19u-boot-imx: Upgrade to updates from imx_4.1.15-1.0.0_ga releaseLauren Post
Signed-off-by: Lauren Post <lauren.post@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2016-04-19imx-test: Upgrade to 5.4 versionLauren Post
- Restructure to support building all test cases on all machines regardless of harware support - mx6s_v4l2_capture: Fix resource leak reported by coverity - memtool: Fix string not null - Fix resource leak problem reported by coverity - mxc_i2c_slave_test: Fix argument cannot be negative problem reported by coverity - mxc_spi_test1: Fix resource leak problems reported by coverity. - mxc_vpu_test: Encode and decode MPEG file in one app failed with return value - mxc_v4l2_capture: Handle usb camera restriction which does not support CROP feature - mxc_mlb_test: Fix out of bounds access reported by coverity - soc_check: Remove unnecessary operation in soc_check.h - mxc_epdc_v2_fb: Initialize upd_data.dither_mode to 0 to avoid the spurious "unsupported quantization bit number" error message. - mxc_sim_test: When sim card doesn't exist, no atr can be received. The application should directly return with corresponding error value. - Remove legacy platform restriction to shell scripts - only support mx6 and mx7 SoC now. Signed-off-by: Lauren Post <lauren.post@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2016-04-19imx-vpu: Upgrade to 5.4.33 versionLauren Post
VPU firmware has been changed to the format of Linux codec driver firmware. Change VPU library to adapt to firmware format change. Signed-off-by: Lauren Post <lauren.post@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2016-04-19imx-lib: Upgrade to 5.4 versionLauren Post
- Remove platform check in hdmi-cec and imx-lib - simplify to support builds on multiple machines - For ipu use the dummy defaul object to fix build issues on non-ipu hardware Signed-off-by: Lauren Post <lauren.post@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2016-04-19imx-kobs: Upgrade to 5.4 versionLauren Post
- Check raw mode flag for backward compatbility - Fix membership name in bch geometry structure. - Fix the previous implementation that may ruin the BBM - Adapt raw page accesses to match the new raw_read/write implementation The old raw access implementation (in GPMI driver) was considering that data and OOB data were separated in their respective regions (the data area and the OOB area of the page), which is not true. They are actually interleaved this way: METADATA + ((DATA + ECCBYTES) * N) The new raw access implementation (in the GPMI driver) is hiding this weird layout to MTD users by exposing a more common layout: DATA + METADATA + (N * ECCBYTES) Here METADATA + (N * ECCBYTES) are exposed as if they were stored in the OOB area. Unfortunately kobs-ng rely on this weird layout when accessing the NAND in raw mode. Signed-off-by: Lauren Post <lauren.post@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2016-04-19firmware-imx: Upgrade to 5.4 versionLauren Post
- Upgrade to FW v3.1.1_r46072 - v3.1.1_r46070 plus 2 patches 391/392 - FSLARIK-391 [Decoder/H.264] VPU is always busy when decoding an erroneous H264 bitstream - FSLARIK-392 [Decoder/VC1] VPU outputs only 1 picture - Change to the format of Linux coda driver firmware Signed-off-by: Lauren Post <lauren.post@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2016-04-19EULA: Update EULA to March v12 versionLauren Post
Update mdsum in fsl-eula-unpack class pdate license mdsum in firmware, codec, parser and vpu Signed-off-by: Lauren Post <lauren.post@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2016-04-19linux-fslc-imx: Update to 4.1.15-1.0.0 GA based forkOtavio Salvador
This updates the kernel fork for the 4.1.15-1.0.0 GA and merges the 4.1.20 stable release on top of it. Up to now, no extra fixes are applied on top of it but this is likely to change as vendors start to base their work on this tree. Change-Id: I2f7c330b35f7bf2ae916b84147e445b28cb8e829 Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2016-04-19linux-imx: Upgrade to 4.1.15 kernelLauren Post
Upgrade to the 4.1.15-1.0.0_ga release Signed-off-by: Lauren Post <lauren.post@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2016-04-19imx7dsabresd: Restructure device tree with new reva namesLauren Post
Some device trees are only needed for reva board The following are reva device trees imx7d-sdb-reva.dtb imx7d-sdb-reva-epdc.dtb imx7d-sdb-reva-gpmi-weim.dtb imx7d-sdb-reva-hdmi-audio.dtb imx7d-sdb-reva-m4.dtb imx7d-sdb-reva-qspi.dtb imx7d-sdb-reva-touch.dtb imx7d-sdb-reva-wm8960.dtb Signed-off-by: Lauren Post <lauren.post@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2016-04-19imx6dlsabresd and imx6slevk : Remove pf200 device treesLauren Post
imx6dlsabresd: Remove imx6dl-sabresd-pf200.dtb imx6slevk: Remove imx6sl-evk-pf200.dtb Signed-off-by: Lauren Post <lauren.post@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2016-04-19imx6dlsabreauto and imx6qsabreauto: Add sabreauto-enetirq device treeLauren Post
ARM: dts: imx6qdl-sabreauto: add enet irq dts files to avoid conflict with MLB ENET gpio irq pin conlict with MLB on i.MX6qdl sabreauto board, since enet gpio irq is extended feature for performance improvement, so let MLB enable in default dts file and newly create sabreauto enet irq dts files. Signed-off-by: Lauren Post <lauren.post@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2016-04-19u-boot-fslc: Update to 1e82446 revisionOtavio Salvador
This brings following backports/fixes: 1e82446 mx6slevk: imximage.cfg: update to fix tINIT3 and tIH-CA violations e578035 mx6qarm2: imximage_mx6dl.cfg update to fix tINIT3 violation adc86d5 mx7_common: Define CONFIG_SYS_MALLOC_LEN in the board file 83195c2 warp7: Pass the UART base definition 87a2283 mx6sabresd: Remove unneeded enable_lvds() function 8f1927e arm: mxs: Update MX28EVK config db8b958 mx6sabresd: Use VESA 1024x768 timings 49185d3 mx27: 16-bit wide watchdog registers cfc4a96 mx6sabre_common: Fix U-Boot corruption after 'saveenv' d955806 arm: mx5: Enable NAND TrimFFS on M53EVK 0aea495 imx: print ARM clock for clocks command 1a1ac16 imx: mx6ul configure the PMIC_STBY_REQ pin as open drain 6f8ee92 imx: mx6ul: skip setting ahb rate 60b774d imx: mx6: Fix incorrect clear mmdc_ch0 handshake mask fe3704b Revert conversion for config_distro_bootcmd.h 8a68957 Revert "warp7: Add initial support" Change-Id: I7a04b21f4ec9aac0a58adb1233d208b1ae2c3258 Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2016-04-19gstreamer1.0-plugins-imx: Update to version 0.12.1Carlos Rafael Giani
The recipe now uses PACKAGECONFIG to allow for enabling/disabling plugins. Also, mx7 support has been added. Changes: * compositor: Rename ImxCompositor(Pad) to ImxVideoCompositor(Pad) This prevents conflicts if both the NXP plugins and the gstreamer-imx are installed in the same rootfs * Add switches to wscript configuration to enable/disable plugins Until now, all plugins were built (unless their dependencies were missing). On some i.MX machines, some features are missing. For example, the i.MX7 has no VPU. To ensure deterministic builds, it is useful to selectively disable plugins in the build. * ipu+pxp: : Fix deadlocks and incorrect logging in case of init error This was causing a freeze if for example one tries to use PxP elements on an i.MX6 Dual/Quad * imxv4l2videosrc fixes and enhancements: * fixes to interlacing support (incl. workarounds for analog TV input) * remove format restriction in get_caps function this removes the limitation on I420 formats * simplified determination of fps (necessary due to driver limitations) * eglvivsink: wayland: Do not commit before buffers are swapped This fixes eglSwapBuffer swaps with damaged frames * Documentation additions Adds GPU memory leak notess to the FAQ * vpu: encoder: Expose motion estimation range as property * vpu: decoder: Drop output frame if its buffer cannot be allocated Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org> Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com> Tested-by: Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2016-04-19imx-gpu-viv: Cleanup directfb referenceTom Hochstein
Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-04-24 11:09:22 +0000