diff options
Diffstat (limited to 'meta-openstack/recipes-support/salt/files/master')
| -rw-r--r-- | meta-openstack/recipes-support/salt/files/master | 525 |
1 files changed, 525 insertions, 0 deletions
diff --git a/meta-openstack/recipes-support/salt/files/master b/meta-openstack/recipes-support/salt/files/master new file mode 100644 index 00000000..8129a4fd --- /dev/null +++ b/meta-openstack/recipes-support/salt/files/master @@ -0,0 +1,525 @@ +##### Primary configuration settings ##### +########################################## +# This configuration file is used to manage the behavior of the Salt Master +# Values that are commented out but have no space after the comment are +# defaults that need not be set in the config. If there is a space after the +# comment that the value is presented as an example and is not the default. + +# Per default, the master will automatically include all config files +# from master.d/*.conf (master.d is a directory in the same directory +# as the main master config file) +#default_include: master.d/*.conf + +# The address of the interface to bind to +#interface: 0.0.0.0 + +# Whether the master should listen for IPv6 connections. If this is set to True, +# the interface option must be adjusted too (for example: "interface: '::'") +#ipv6: False + +# The tcp port used by the publisher +#publish_port: 4505 + +# The user to run the salt-master as. Salt will update all permissions to +# allow the specified user to run the master. If the modified files cause +# conflicts set verify_env to False. +#user: root + +# Max open files +# Each minion connecting to the master uses AT LEAST one file descriptor, the +# master subscription connection. If enough minions connect you might start +# seeing on the console(and then salt-master crashes): +# Too many open files (tcp_listener.cpp:335) +# Aborted (core dumped) +# +# By default this value will be the one of `ulimit -Hn`, ie, the hard limit for +# max open files. +# +# If you wish to set a different value than the default one, uncomment and +# configure this setting. Remember that this value CANNOT be higher than the +# hard limit. Raising the hard limit depends on your OS and/or distribution, +# a good way to find the limit is to search the internet for(for example): +# raise max open files hard limit debian +# +#max_open_files: 100000 + +# The number of worker threads to start, these threads are used to manage +# return calls made from minions to the master, if the master seems to be +# running slowly, increase the number of threads +#worker_threads: 5 + +# The port used by the communication interface. The ret (return) port is the +# interface used for the file server, authentication, job returnes, etc. +#ret_port: 4506 + +# Specify the location of the daemon process ID file +#pidfile: /var/run/salt-master.pid + +# The root directory prepended to these options: pki_dir, cachedir, +# sock_dir, log_file, autosign_file, extension_modules, key_logfile, pidfile. +#root_dir: / + +# Directory used to store public key data +#pki_dir: /etc/salt/pki/master + +# Directory to store job and cache data +#cachedir: /var/cache/salt/master + +# Verify and set permissions on configuration directories at startup +#verify_env: True + +# Set the number of hours to keep old job information in the job cache +#keep_jobs: 24 + +# Set the default timeout for the salt command and api, the default is 5 +# seconds +#timeout: 5 + +# The loop_interval option controls the seconds for the master's maintinance +# process check cycle. This process updates file server backends, cleans the +# job cache and executes the scheduler. +#loop_interval: 60 + +# Set the default outputter used by the salt command. The default is "nested" +#output: nested + +# By default output is colored, to disable colored output set the color value +# to False +#color: True + +# Set the directory used to hold unix sockets +#sock_dir: /var/run/salt/master + +# The master can take a while to start up when lspci and/or dmidecode is used +# to populate the grains for the master. Enable if you want to see GPU hardware +# data for your master. +# +# enable_gpu_grains: False + +# The master maintains a job cache, while this is a great addition it can be +# a burden on the master for larger deployments (over 5000 minions). +# Disabling the job cache will make previously executed jobs unavailable to +# the jobs system and is not generally recommended. +# +#job_cache: True + +# Cache minion grains and pillar data in the cachedir. +#minion_data_cache: True + +# The master can include configuration from other files. To enable this, +# pass a list of paths to this option. The paths can be either relative or +# absolute; if relative, they are considered to be relative to the directory +# the main master configuration file lives in (this file). Paths can make use +# of shell-style globbing. If no files are matched by a path passed to this +# option then the master will log a warning message. +# +# +# Include a config file from some other path: +#include: /etc/salt/extra_config +# +# Include config from several files and directories: +#include: +# - /etc/salt/extra_config + + +##### Security settings ##### +########################################## +# Enable "open mode", this mode still maintains encryption, but turns off +# authentication, this is only intended for highly secure environments or for +# the situation where your keys end up in a bad state. If you run in open mode +# you do so at your own risk! +#open_mode: False + +# Enable auto_accept, this setting will automatically accept all incoming +# public keys from the minions. Note that this is insecure. +#auto_accept: False + +# If the autosign_file is specified only incoming keys specified in +# the autosign_file will be automatically accepted. This is insecure. +# Regular expressions as well as globing lines are supported. +#autosign_file: /etc/salt/autosign.conf + +# Enable permissive access to the salt keys. This allows you to run the +# master or minion as root, but have a non-root group be given access to +# your pki_dir. To make the access explicit, root must belong to the group +# you've given access to. This is potentially quite insecure. +# If an autosign_file is specified, enabling permissive_pki_access will allow group access +# to that specific file. +#permissive_pki_access: False + +# Allow users on the master access to execute specific commands on minions. +# This setting should be treated with care since it opens up execution +# capabilities to non root users. By default this capability is completely +# disabled. +# +#client_acl: +# larry: +# - test.ping +# - network.* +# + +# Blacklist any of the following users or modules +# +# This example would blacklist all non sudo users, including root from +# running any commands. It would also blacklist any use of the "cmd" +# module. +# This is completely disabled by default. +# +#client_acl_blacklist: +# users: +# - root +# - '^(?!sudo_).*$' # all non sudo users +# modules: +# - cmd + +# The external auth system uses the Salt auth modules to authenticate and +# validate users to access areas of the Salt system. +# +#external_auth: +# pam: +# fred: +# - test.* +# + +# Time (in seconds) for a newly generated token to live. Default: 12 hours +#token_expire: 43200 + +# Allow minions to push files to the master. This is disabled by default, for +# security purposes. +#file_recv: False + +# Signature verification on messages published from the master. +# This causes the master to cryptographically sign all messages published to its event +# bus, and minions then verify that signature before acting on the message. +# +# This is False by default. +# +# Note that to facilitate interoperability with masters and minions that are different +# versions, if sign_pub_messages is True but a message is received by a minion with +# no signature, it will still be accepted, and a warning message will be logged. +# Conversely, if sign_pub_messages is False, but a minion receives a signed +# message it will be accepted, the signature will not be checked, and a warning message +# will be logged. This behavior will go away in Salt 0.17.6 (or Hydrogen RC1, whichever +# comes first) and these two situations will cause minion to throw an exception and +# drop the message. +# +# sign_pub_messages: False + +##### Master Module Management ##### +########################################## +# Manage how master side modules are loaded + +# Add any additional locations to look for master runners +#runner_dirs: [] + +# Enable Cython for master side modules +#cython_enable: False + + +##### State System settings ##### +########################################## +# The state system uses a "top" file to tell the minions what environment to +# use and what modules to use. The state_top file is defined relative to the +# root of the base environment as defined in "File Server settings" below. +#state_top: top.sls + +# The master_tops option replaces the external_nodes option by creating +# a plugable system for the generation of external top data. The external_nodes +# option is deprecated by the master_tops option. +# To gain the capabilities of the classic external_nodes system, use the +# following configuration: +# master_tops: +# ext_nodes: <Shell command which returns yaml> +# +#master_tops: {} + +# The external_nodes option allows Salt to gather data that would normally be +# placed in a top file. The external_nodes option is the executable that will +# return the ENC data. Remember that Salt will look for external nodes AND top +# files and combine the results if both are enabled! +#external_nodes: None + +# The renderer to use on the minions to render the state data +#renderer: yaml_jinja + +# The failhard option tells the minions to stop immediately after the first +# failure detected in the state execution, defaults to False +#failhard: False + +# The state_verbose and state_output settings can be used to change the way +# state system data is printed to the display. By default all data is printed. +# The state_verbose setting can be set to True or False, when set to False +# all data that has a result of True and no changes will be suppressed. +#state_verbose: True + +# The state_output setting changes if the output is the full multi line +# output for each changed state if set to 'full', but if set to 'terse' +# the output will be shortened to a single line. If set to 'mixed', the output +# will be terse unless a state failed, in which case that output will be full. +#state_output: full + + +##### File Server settings ##### +########################################## +# Salt runs a lightweight file server written in zeromq to deliver files to +# minions. This file server is built into the master daemon and does not +# require a dedicated port. + +# The file server works on environments passed to the master, each environment +# can have multiple root directories, the subdirectories in the multiple file +# roots cannot match, otherwise the downloaded files will not be able to be +# reliably ensured. A base environment is required to house the top file. +# Example: +# file_roots: +# base: +# - /srv/salt/ +# dev: +# - /srv/salt/dev/services +# - /srv/salt/dev/states +# prod: +# - /srv/salt/prod/services +# - /srv/salt/prod/states + +#file_roots: +# base: +# - /srv/salt + +# The hash_type is the hash to use when discovering the hash of a file on +# the master server. The default is md5, but sha1, sha224, sha256, sha384 +# and sha512 are also supported. +#hash_type: md5 + +# The buffer size in the file server can be adjusted here: +#file_buffer_size: 1048576 + +# A regular expression (or a list of expressions) that will be matched +# against the file path before syncing the modules and states to the minions. +# This includes files affected by the file.recurse state. +# For example, if you manage your custom modules and states in subversion +# and don't want all the '.svn' folders and content synced to your minions, +# you could set this to '/\.svn($|/)'. By default nothing is ignored. +# +#file_ignore_regex: +# - '/\.svn($|/)' +# - '/\.git($|/)' + +# A file glob (or list of file globs) that will be matched against the file +# path before syncing the modules and states to the minions. This is similar +# to file_ignore_regex above, but works on globs instead of regex. By default +# nothing is ignored. +# +# file_ignore_glob: +# - '*.pyc' +# - '*/somefolder/*.bak' +# - '*.swp' + +# File Server Backend +# Salt supports a modular fileserver backend system, this system allows +# the salt master to link directly to third party systems to gather and +# manage the files available to minions. Multiple backends can be +# configured and will be searched for the requested file in the order in which +# they are defined here. The default setting only enables the standard backend +# "roots" which uses the "file_roots" option. +# +#fileserver_backend: +# - roots +# +# To use multiple backends list them in the order they are searched: +# +#fileserver_backend: +# - git +# - roots +# +# By default, the Salt fileserver recurses fully into all defined environments +# to attempt to find files. To limit this behavior so that the fileserver only +# traverses directories with SLS files and special Salt directories like _modules, +# enable the option below. This might be useful for installations where a file root +# has a very large number of files and performance is impacted. Default is False. +# +# fileserver_limit_traversal: False +# +# Git fileserver backend configuration +# When using the git fileserver backend at least one git remote needs to be +# defined. The user running the salt master will need read access to the repo. +# +#gitfs_remotes: +# - git://github.com/saltstack/salt-states.git +# - file:///var/git/saltmaster +# +# The repos will be searched in order to find the file requested by a client +# and the first repo to have the file will return it. +# When using the git backend branches and tags are translated into salt +# environments. +# Note: file:// repos will be treated as a remote, so refs you want used must +# exist in that repo as *local* refs. +# +# The gitfs_root option gives the ability to serve files from a subdirectory +# within the repository. The path is defined relative to the root of the +# repository and defaults to the repository root. +#gitfs_root: somefolder/otherfolder + + +##### Pillar settings ##### +########################################## +# Salt Pillars allow for the building of global data that can be made selectively +# available to different minions based on minion grain filtering. The Salt +# Pillar is laid out in the same fashion as the file server, with environments, +# a top file and sls files. However, pillar data does not need to be in the +# highstate format, and is generally just key/value pairs. + +#pillar_roots: +# base: +# - /srv/pillar + +#ext_pillar: +# - hiera: /etc/hiera.yaml +# - cmd_yaml: cat /etc/salt/yaml + +# The pillar_opts option adds the master configuration file data to a dict in +# the pillar called "master". This is used to set simple configurations in the +# master config file that can then be used on minions. +#pillar_opts: True + + +##### Syndic settings ##### +########################################## +# The Salt syndic is used to pass commands through a master from a higher +# master. Using the syndic is simple, if this is a master that will have +# syndic servers(s) below it set the "order_masters" setting to True, if this +# is a master that will be running a syndic daemon for passthrough the +# "syndic_master" setting needs to be set to the location of the master server +# to receive commands from. + +# Set the order_masters setting to True if this master will command lower +# masters' syndic interfaces. +#order_masters: False + +# If this master will be running a salt syndic daemon, syndic_master tells +# this master where to receive commands from. +#syndic_master: masterofmaster + +# This is the 'ret_port' of the MasterOfMaster +#syndic_master_port: 4506 + +# PID file of the syndic daemon +#syndic_pidfile: /var/run/salt-syndic.pid + +# LOG file of the syndic daemon +#syndic_log_file: syndic.log + +##### Peer Publish settings ##### +########################################## +# Salt minions can send commands to other minions, but only if the minion is +# allowed to. By default "Peer Publication" is disabled, and when enabled it +# is enabled for specific minions and specific commands. This allows secure +# compartmentalization of commands based on individual minions. + +# The configuration uses regular expressions to match minions and then a list +# of regular expressions to match functions. The following will allow the +# minion authenticated as foo.example.com to execute functions from the test +# and pkg modules. +# +#peer: +# foo.example.com: +# - test.* +# - pkg.* +# +# This will allow all minions to execute all commands: +# +#peer: +# .*: +# - .* +# +# This is not recommended, since it would allow anyone who gets root on any +# single minion to instantly have root on all of the minions! + +# Minions can also be allowed to execute runners from the salt master. +# Since executing a runner from the minion could be considered a security risk, +# it needs to be enabled. This setting functions just like the peer setting +# except that it opens up runners instead of module functions. +# +# All peer runner support is turned off by default and must be enabled before +# using. This will enable all peer runners for all minions: +# +#peer_run: +# .*: +# - .* +# +# To enable just the manage.up runner for the minion foo.example.com: +# +#peer_run: +# foo.example.com: +# - manage.up + + +##### Logging settings ##### +########################################## +# The location of the master log file +# The master log can be sent to a regular file, local path name, or network +# location. Remote logging works best when configured to use rsyslogd(8) (e.g.: +# ``file:///dev/log``), with rsyslogd(8) configured for network logging. The URI +# format is: <file|udp|tcp>://<host|socketpath>:<port-if-required>/<log-facility> +#log_file: /var/log/salt/master +#log_file: file:///dev/log +#log_file: udp://loghost:10514 + +#log_file: /var/log/salt/master +#key_logfile: /var/log/salt/key + +# The level of messages to send to the console. +# One of 'garbage', 'trace', 'debug', info', 'warning', 'error', 'critical'. +#log_level: warning + +# The level of messages to send to the log file. +# One of 'garbage', 'trace', 'debug', info', 'warning', 'error', 'critical'. +#log_level_logfile: warning + +# The date and time format used in log messages. Allowed date/time formating +# can be seen here: http://docs.python.org/library/time.html#time.strftime +#log_datefmt: '%H:%M:%S' +#log_datefmt_logfile: '%Y-%m-%d %H:%M:%S' + +# The format of the console logging messages. Allowed formatting options can +# be seen here: http://docs.python.org/library/logging.html#logrecord-attributes +#log_fmt_console: '[%(levelname)-8s] %(message)s' +#log_fmt_logfile: '%(asctime)s,%(msecs)03.0f [%(name)-17s][%(levelname)-8s] %(message)s' + +# This can be used to control logging levels more specificically. This +# example sets the main salt library at the 'warning' level, but sets +# 'salt.modules' to log at the 'debug' level: +# log_granular_levels: +# 'salt': 'warning', +# 'salt.modules': 'debug' +# +#log_granular_levels: {} + + +##### Node Groups ##### +########################################## +# Node groups allow for logical groupings of minion nodes. +# A group consists of a group name and a compound target. +# +#nodegroups: +# group1: 'L@foo.domain.com,bar.domain.com,baz.domain.com and bl*.domain.com' +# group2: 'G@os:Debian and foo.domain.com' + + +##### Range Cluster settings ##### +########################################## +# The range server (and optional port) that serves your cluster information +# https://github.com/grierj/range/wiki/Introduction-to-Range-with-YAML-files +# +#range_server: range:80 + + +##### Windows Software Repo settings ##### +############################################## +# Location of the repo on the master +#win_repo: '/srv/salt/win/repo' + +# Location of the master's repo cache file +#win_repo_mastercachefile: '/srv/salt/win/repo/winrepo.p' + +# List of git repositories to include with the local repo +#win_gitrepos: +# - 'https://github.com/saltstack/salt-winrepo.git' |