/* * core_intr.c - DesignWare HS OTG Controller common interrupt handling * * Copyright (C) 2004-2013 Synopsys, Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions, and the following disclaimer, * without modification. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The names of the above-listed copyright holders may not be used * to endorse or promote products derived from this software without * specific prior written permission. * * ALTERNATIVELY, this software may be distributed under the terms of the * GNU General Public License ("GPL") as published by the Free Software * Foundation; either version 2 of the License, or (at your option) any * later version. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /* * This file contains the common interrupt handlers */ #include #include #include #include #include #include #include #include #include #include #include #include "core.h" #include "hcd.h" static const char *dwc2_op_state_str(struct dwc2_hsotg *hsotg) { switch (hsotg->op_state) { case OTG_STATE_A_HOST: return "a_host"; case OTG_STATE_A_SUSPEND: return "a_suspend"; case OTG_STATE_A_PERIPHERAL: return "a_peripheral"; case OTG_STATE_B_PERIPHERAL: return "b_peripheral"; case OTG_STATE_B_HOST: return "b_host"; default: return "unknown"; } } /** * dwc2_handle_usb_port_intr - handles OTG PRTINT interrupts. * When the PRTINT interrupt fires, there are certain status bits in the Host * Port that needs to get cleared. * * @hsotg: Programming view of DWC_otg controller */ static void dwc2_handle_usb_port_intr(struct dwc2_hsotg *hsotg) { u32 hprt0 = readl(hsotg->regs + HPRT0); if (hprt0 & HPRT0_ENACHG) { hprt0 &= ~HPRT0_ENA; writel(hprt0, hsotg->regs + HPRT0); } /* Clear interrupt */ writel(GINTSTS_PRTINT, hsotg->regs + GINTSTS); } /** * dwc2_handle_mode_mismatch_intr() - Logs a mode mismatch warning message * * @hsotg: Programming view of DWC_otg controller */ static void dwc2_handle_mode_mismatch_intr(struct dwc2_hsotg *hsotg) { dev_warn(hsotg->dev, "Mode Mismatch Interrupt: currently in %s mode\n", dwc2_is_host_mode(hsotg) ? "Host" : "Device"); /* Clear interrupt */ writel(GINTSTS_MODEMIS, hsotg->regs + GINTSTS); } /** * dwc2_handle_otg_intr() - Handles the OTG Interrupts. It reads the OTG * Interrupt Register (GOTGINT) to determine what interrupt has occurred. * * @hsotg: Programming view of DWC_otg controller */ static void dwc2_handle_otg_intr(struct dwc2_hsotg *hsotg) { u32 gotgint; u32 gotgctl; u32 gintmsk; gotgint = readl(hsotg->regs + GOTGINT); gotgctl = readl(hsotg->regs + GOTGCTL); dev_dbg(hsotg->dev, "++OTG Interrupt gotgint=%0x [%s]\n", gotgint, dwc2_op_state_str(hsotg)); if (gotgint & GOTGINT_SES_END_DET) { dev_dbg(hsotg->dev, " ++OTG Interrupt: Session End Detected++ (%s)\n", dwc2_op_state_str(hsotg)); gotgctl = readl(hsotg->regs + GOTGCTL); if (dwc2_is_device_mode(hsotg)) s3c_hsotg_disconnect(hsotg); if (hsotg->op_state == OTG_STATE_B_HOST) { hsotg->op_state = OTG_STATE_B_PERIPHERAL; } else { /* * If not B_HOST and Device HNP still set, HNP did * not succeed! */ if (gotgctl & GOTGCTL_DEVHNPEN) { dev_dbg(hsotg->dev, "Session End Detected\n"); dev_err(hsotg->dev, "Device Not Connected/Responding!\n"); } /* * If Session End Detected the B-Cable has been * disconnected */ /* Reset to a clean state */ hsotg->lx_state = DWC2_L0; } gotgctl = readl(hsotg->regs + GOTGCTL); gotgctl &= ~GOTGCTL_DEVHNPEN; writel(gotgctl, hsotg->regs + GOTGCTL); } if (gotgint & GOTGINT_SES_REQ_SUC_STS_CHNG) { dev_dbg(hsotg->dev, " ++OTG Interrupt: Session Request Success Status Change++\n"); gotgctl = readl(hsotg->regs + GOTGCTL); if (gotgctl & GOTGCTL_SESREQSCS) { if (hsotg->core_params->phy_type == DWC2_PHY_TYPE_PARAM_FS && hsotg->core_params->i2c_enable > 0) { hsotg->srp_success = 1; } else { /* Clear Session Request */ gotgctl = readl(hsotg->regs + GOTGCTL); gotgctl &= ~GOTGCTL_SESREQ; writel(gotgctl, hsotg->regs + GOTGCTL); } } } if (gotgint & GOTGINT_HST_NEG_SUC_STS_CHNG) { /* * Print statements during the HNP interrupt handling * can cause it to fail */ gotgctl = readl(hsotg->regs + GOTGCTL); /* * WA for 3.00a- HW is not setting cur_mode, even sometimes * this does not help */ if (hsotg->hw_params.snpsid >= DWC2_CORE_REV_3_00a) udelay(100); if (gotgctl & GOTGCTL_HSTNEGSCS) { if (dwc2_is_host_mode(hsotg)) { hsotg->op_state = OTG_STATE_B_HOST; /* * Need to disable SOF interrupt immediately. * When switching from device to host, the PCD * interrupt handler won't handle the interrupt * if host mode is already set. The HCD * interrupt handler won't get called if the * HCD state is HALT. This means that the * interrupt does not get handled and Linux * complains loudly. */ gintmsk = readl(hsotg->regs + GINTMSK); gintmsk &= ~GINTSTS_SOF; writel(gintmsk, hsotg->regs + GINTMSK); /* * Call callback function with spin lock * released */ spin_unlock(&hsotg->lock); /* Initialize the Core for Host mode */ dwc2_hcd_start(hsotg); spin_lock(&hsotg->lock); hsotg->op_state = OTG_STATE_B_HOST; } } else { gotgctl = readl(hsotg->regs + GOTGCTL); gotgctl &= ~(GOTGCTL_HNPREQ | GOTGCTL_DEVHNPEN); writel(gotgctl, hsotg->regs + GOTGCTL); dev_dbg(hsotg->dev, "HNP Failed\n"); dev_err(hsotg->dev, "Device Not Connected/Responding\n"); } } if (gotgint & GOTGINT_HST_NEG_DET) { /* * The disconnect interrupt is set at the same time as * Host Negotiation Detected. During the mode switch all * interrupts are cleared so the disconnect interrupt * handler will not get executed. */ dev_dbg(hsotg->dev, " ++OTG Interrupt: Host Negotiation Detected++ (%s)\n", (dwc2_is_host_mode(hsotg) ? "Host" : "Device")); if (dwc2_is_device_mode(hsotg)) { dev_dbg(hsotg->dev, "a_suspend->a_peripheral (%d)\n", hsotg->op_state); spin_unlock(&hsotg->lock); dwc2_hcd_disconnect(hsotg); spin_lock(&hsotg->lock); hsotg->op_state = OTG_STATE_A_PERIPHERAL; } else { /* Need to disable SOF interrupt immediately */ gintmsk = readl(hsotg->regs + GINTMSK); gintmsk &= ~GINTSTS_SOF; writel(gintmsk, hsotg->regs + GINTMSK); spin_unlock(&hsotg->lock); dwc2_hcd_start(hsotg); spin_lock(&hsotg->lock); hsotg->op_state = OTG_STATE_A_HOST; } } if (gotgint & GOTGINT_A_DEV_TOUT_CHG) dev_dbg(hsotg->dev, " ++OTG Interrupt: A-Device Timeout Change++\n"); if (gotgint & GOTGINT_DBNCE_DONE) dev_dbg(hsotg->dev, " ++OTG Interrupt: Debounce Done++\n"); /* Clear GOTGINT */ writel(gotgint, hsotg->regs + GOTGINT); } /** * dwc2_handle_conn_id_status_change_intr() - Handles the Connector ID Status * Change Interrupt * * @hsotg: Programming view of DWC_otg controller * * Reads the OTG Interrupt Register (GOTCTL) to determine whether this is a * Device to Host Mode transition or a Host to Device Mode transition. This only * occurs when the cable is connected/removed from the PHY connector. */ static void dwc2_handle_conn_id_status_change_intr(struct dwc2_hsotg *hsotg) { u32 gintmsk = readl(hsotg->regs + GINTMSK); /* Need to disable SOF interrupt immediately */ gintmsk &= ~GINTSTS_SOF; writel(gintmsk, hsotg->regs + GINTMSK); dev_dbg(hsotg->dev, " ++Connector ID Status Change Interrupt++ (%s)\n", dwc2_is_host_mode(hsotg) ? "Host" : "Device"); /* * Need to schedule a work, as there are possible DELAY function calls. * Release lock before scheduling workq as it holds spinlock during * scheduling. */ if (hsotg->wq_otg) { spin_unlock(&hsotg->lock); queue_work(hsotg->wq_otg, &hsotg->wf_otg); spin_lock(&hsotg->lock); } /* Clear interrupt */ writel(GINTSTS_CONIDSTSCHNG, hsotg->regs + GINTSTS); } /** * dwc2_handle_session_req_intr() - This interrupt indicates that a device is * initiating the Session Request Protocol to request the host to turn on bus * power so a new session can begin * * @hsotg: Programming view of DWC_otg controller * * This handler responds by turning on bus power. If the DWC_otg controller is * in low power mode, this handler brings the controller out of low power mode * before turning on bus power. */ static void dwc2_handle_session_req_intr(struct dwc2_hsotg *hsotg) { dev_dbg(hsotg->dev, "++Session Request Interrupt++\n"); /* Clear interrupt */ writel(GINTSTS_SESSREQINT, hsotg->regs + GINTSTS); /* * Report disconnect if there is any previous session established */ if (dwc2_is_device_mode(hsotg)) s3c_hsotg_disconnect(hsotg); } /* * This interrupt indicates that the DWC_otg controller has detected a * resume or remote wakeup sequence. If the DWC_otg controller is in * low power mode, the handler must brings the controller out of low * power mode. The controller automatically begins resume signaling. * The handler schedules a time to stop resume signaling. */ static void dwc2_handle_wakeup_detected_intr(struct dwc2_hsotg *hsotg) { dev_dbg(hsotg->dev, "++Resume or Remote Wakeup Detected Interrupt++\n"); dev_dbg(hsotg->dev, "%s lxstate = %d\n", __func__, hsotg->lx_state); if (dwc2_is_device_mode(hsotg)) { dev_dbg(hsotg->dev, "DSTS=0x%0x\n", readl(hsotg->regs + DSTS)); if (hsotg->lx_state == DWC2_L2) { u32 dctl = readl(hsotg->regs + DCTL); /* Clear Remote Wakeup Signaling */ dctl &= ~DCTL_RMTWKUPSIG; writel(dctl, hsotg->regs + DCTL); } /* Change to L0 state */ hsotg->lx_state = DWC2_L0; } else { if (hsotg->lx_state != DWC2_L1) { u32 pcgcctl = readl(hsotg->regs + PCGCTL); /* Restart the Phy Clock */ pcgcctl &= ~PCGCTL_STOPPCLK; writel(pcgcctl, hsotg->regs + PCGCTL); mod_timer(&hsotg->wkp_timer, jiffies + msecs_to_jiffies(71)); } else { /* Change to L0 state */ hsotg->lx_state = DWC2_L0; } } /* Clear interrupt */ writel(GINTSTS_WKUPINT, hsotg->regs + GINTSTS); } /* * This interrupt indicates that a device has been disconnected from the * root port */ static void dwc2_handle_disconnect_intr(struct dwc2_hsotg *hsotg) { dev_dbg(hsotg->dev, "++Disconnect Detected Interrupt++ (%s) %s\n", dwc2_is_host_mode(hsotg) ? "Host" : "Device", dwc2_op_state_str(hsotg)); /* Change to L3 (OFF) state */ hsotg->lx_state = DWC2_L3; writel(GINTSTS_DISCONNINT, hsotg->regs + GINTSTS); } /* * This interrupt indicates that SUSPEND state has been detected on the USB. * * For HNP the USB Suspend interrupt signals the change from "a_peripheral" * to "a_host". * * When power management is enabled the core will be put in low power mode. */ static void dwc2_handle_usb_suspend_intr(struct dwc2_hsotg *hsotg) { u32 dsts; dev_dbg(hsotg->dev, "USB SUSPEND\n"); if (dwc2_is_device_mode(hsotg)) { /* * Check the Device status register to determine if the Suspend * state is active */ dsts = readl(hsotg->regs + DSTS); dev_dbg(hsotg->dev, "DSTS=0x%0x\n", dsts); dev_dbg(hsotg->dev, "DSTS.Suspend Status=%d HWCFG4.Power Optimize=%d\n", !!(dsts & DSTS_SUSPSTS), hsotg->hw_params.power_optimized); } else { if (hsotg->op_state == OTG_STATE_A_PERIPHERAL) { dev_dbg(hsotg->dev, "a_peripheral->a_host\n"); /* Clear the a_peripheral flag, back to a_host */ spin_unlock(&hsotg->lock); dwc2_hcd_start(hsotg); spin_lock(&hsotg->lock); hsotg->op_state = OTG_STATE_A_HOST; } } /* Change to L2 (suspend) state */ hsotg->lx_state = DWC2_L2; /* Clear interrupt */ writel(GINTSTS_USBSUSP, hsotg->regs + GINTSTS); } #define GINTMSK_COMMON (GINTSTS_WKUPINT | GINTSTS_SESSREQINT | \ GINTSTS_CONIDSTSCHNG | GINTSTS_OTGINT | \ GINTSTS_MODEMIS | GINTSTS_DISCONNINT | \ GINTSTS_USBSUSP | GINTSTS_PRTINT) /* * This function returns the Core Interrupt register */ static u32 dwc2_read_common_intr(struct dwc2_hsotg *hsotg) { u32 gintsts; u32 gintmsk; u32 gahbcfg; u32 gintmsk_common = GINTMSK_COMMON; gintsts = readl(hsotg->regs + GINTSTS); gintmsk = readl(hsotg->regs + GINTMSK); gahbcfg = readl(hsotg->regs + GAHBCFG); /* If any common interrupts set */ if (gintsts & gintmsk_common) dev_dbg(hsotg->dev, "gintsts=%08x gintmsk=%08x\n", gintsts, gintmsk); if (gahbcfg & GAHBCFG_GLBL_INTR_EN) return gintsts & gintmsk & gintmsk_common; else return 0; } /* * Common interrupt handler * * The common interrupts are those that occur in both Host and Device mode. * This handler handles the following interrupts: * - Mode Mismatch Interrupt * - OTG Interrupt * - Connector ID Status Change Interrupt * - Disconnect Interrupt * - Session Request Interrupt * - Resume / Remote Wakeup Detected Interrupt * - Suspend Interrupt */ irqreturn_t dwc2_handle_common_intr(int irq, void *dev) { struct dwc2_hsotg *hsotg = dev; u32 gintsts; irqreturn_t retval = IRQ_NONE; if (!dwc2_is_controller_alive(hsotg)) { dev_warn(hsotg->dev, "Controller is dead\n"); goto out; } spin_lock(&hsotg->lock); gintsts = dwc2_read_common_intr(hsotg); if (gintsts & ~GINTSTS_PRTINT) retval = IRQ_HANDLED; if (gintsts & GINTSTS_MODEMIS) dwc2_handle_mode_mismatch_intr(hsotg); if (gintsts & GINTSTS_OTGINT) dwc2_handle_otg_intr(hsotg); if (gintsts & GINTSTS_CONIDSTSCHNG) dwc2_handle_conn_id_status_change_intr(hsotg); if (gintsts & GINTSTS_DISCONNINT) dwc2_handle_disconnect_intr(hsotg); if (gintsts & GINTSTS_SESSREQINT) dwc2_handle_session_req_intr(hsotg); if (gintsts & GINTSTS_WKUPINT) dwc2_handle_wakeup_detected_intr(hsotg); if (gintsts & GINTSTS_USBSUSP) dwc2_handle_usb_suspend_intr(hsotg); if (gintsts & GINTSTS_PRTINT) { /* * The port interrupt occurs while in device mode with HPRT0 * Port Enable/Disable */ if (dwc2_is_device_mode(hsotg)) { dev_dbg(hsotg->dev, " --Port interrupt received in Device mode--\n"); dwc2_handle_usb_port_intr(hsotg); retval = IRQ_HANDLED; } } spin_unlock(&hsotg->lock); out: return retval; } EXPORT_SYMBOL_GPL(dwc2_handle_common_intr);