aboutsummaryrefslogtreecommitdiffstats
path: root/scripts/setlocalversion
AgeCommit message (Collapse)Author
2023-03-16kbuild: use git-archive for source package creationMasahiro Yamada
Commit 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") added a new tool, scripts/list-gitignored. My intention was to create source packages without cleaning the source tree, without relying on git. Linus strongly objected to it, and suggested using 'git archive' instead. [1] [2] [3] This commit goes in that direction - Remove scripts/list-gitignored.c and rewrites Makefiles and scripts to use 'git archive' for building Debian and RPM source packages. It also makes 'make perf-tar*-src-pkg' use 'git archive' again. Going forward, building source packages is only possible in a git-managed tree. Building binary packages does not require git. [1]: https://lore.kernel.org/lkml/CAHk-=wi49sMaC7vY1yMagk7eqLK=1jHeHQ=yZ_k45P=xBccnmA@mail.gmail.com/ [2]: https://lore.kernel.org/lkml/CAHk-=wh5AixGsLeT0qH2oZHKq0FLUTbyTw4qY921L=PwYgoGVw@mail.gmail.com/ [3]: https://lore.kernel.org/lkml/CAHk-=wgM-W6Fu==EoAVCabxyX8eYBz9kNC88-tm9ExRQwA79UQ@mail.gmail.com/ Fixes: 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") Fixes: e0ca16749ac3 ("kbuild: make perf-tar*-src-pkg work without relying on git") Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-02-15setlocalversion: use only the correct release tag for git-describeMasahiro Yamada
Currently, setlocalversion uses any annotated tag for git-describe. If we are at a tagged commit, it will not append the commit hash. $ git checkout v6.2-rc1^ $ make -s defconfig kernelrelease 6.1.0-14595-g292a089d78d3 $ git tag -a foo -m foo $ make -s kernelrelease 6.1.0 If a local tag 'foo' exists, it pretends to be a released version '6.1.0', while there are many commits on top of it. The output should be consistent irrespective of such a local tag. Pass the correct release tag to --match option of git-describe. In the mainline kernel, the SUBLEVEL is always '0', which is omitted from the tag. KERNELVERSION annotated tag 6.1.0 -> v6.1 (mainline) 6.2.0-rc5 -> v6.2-rc5 (mainline, release candidate) 6.1.7 -> v6.1.7 (stable) To preserve the behavior in linux-next, use the tag derived from localversion* files if exists. In linux-next, the local version is specified by the localversion-next file. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-02-05setlocalversion: clean up the construction of version outputMasahiro Yamada
Concatenate all components in the last line instead of accumulating them into the 'res' variable. No functional change is intended. A preparation for the next change. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-02-05setlocalversion: absorb $(KERNELVERSION)Masahiro Yamada
Print $(KERNELVERSION) in setlocalversion so that the callers get simpler. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-02-05setlocalversion: make indentation shallowerMasahiro Yamada
Return earlier if we are not in the correct git repository. This makes the code more readable. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2023-02-05setlocalversion: simplify the construction of the short versionMasahiro Yamada
With the --short option given, scm_version() prints "+". Just append it. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2023-01-30kbuild: do not put .scmversion into the source tarballMasahiro Yamada
.scmversion is used by (src)rpm-pkg and deb-pkg to carry KERNELRELEASE. In fact, deb-pkg does not rely on it any more because the generated debian/rules specifies KERNELRELEASE from the command line. Do likwise for (src)rpm-pkg, and remove this feature. For the same reason, you do not need to save LOCALVERSION in the spec file. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2022-01-08kbuild: do not quote string values in include/config/auto.confMasahiro Yamada
The previous commit fixed up all shell scripts to not include include/config/auto.conf. Now that include/config/auto.conf is only included by Makefiles, we can change it into a more Make-friendly form. Previously, Kconfig output string values enclosed with double-quotes (both in the .config and include/config/auto.conf): CONFIG_X="foo bar" Unlike shell, Make handles double-quotes (and single-quotes as well) verbatim. We must rip them off when used. There are some patterns: [1] $(patsubst "%",%,$(CONFIG_X)) [2] $(CONFIG_X:"%"=%) [3] $(subst ",,$(CONFIG_X)) [4] $(shell echo $(CONFIG_X)) These are not only ugly, but also fragile. [1] and [2] do not work if the value contains spaces, like CONFIG_X=" foo bar " [3] does not work correctly if the value contains double-quotes like CONFIG_X="foo\"bar" [4] seems to work better, but has a cost of forking a process. Anyway, quoted strings were always PITA for our Makefiles. This commit changes Kconfig to stop quoting in include/config/auto.conf. These are the string type symbols referenced in Makefiles or scripts: ACPI_CUSTOM_DSDT_FILE ARC_BUILTIN_DTB_NAME ARC_TUNE_MCPU BUILTIN_DTB_SOURCE CC_IMPLICIT_FALLTHROUGH CC_VERSION_TEXT CFG80211_EXTRA_REGDB_KEYDIR EXTRA_FIRMWARE EXTRA_FIRMWARE_DIR EXTRA_TARGETS H8300_BUILTIN_DTB INITRAMFS_SOURCE LOCALVERSION MODULE_SIG_HASH MODULE_SIG_KEY NDS32_BUILTIN_DTB NIOS2_DTB_SOURCE OPENRISC_BUILTIN_DTB SOC_CANAAN_K210_DTB_SOURCE SYSTEM_BLACKLIST_HASH_LIST SYSTEM_REVOCATION_KEYS SYSTEM_TRUSTED_KEYS TARGET_CPU UNUSED_KSYMS_WHITELIST XILINX_MICROBLAZE0_FAMILY XILINX_MICROBLAZE0_HW_VER XTENSA_VARIANT_NAME I checked them one by one, and fixed up the code where necessary. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2022-01-08kbuild: do not include include/config/auto.conf from shell scriptsMasahiro Yamada
Richard Weinberger pointed out the risk of sourcing the kernel config from shell scripts [1], and proposed some patches [2], [3]. It is a good point, but it took a long time because I was wondering how to fix this. This commit goes with simple grep approach because there are only a few scripts including the kernel configuration. scripts/link_vmlinux.sh has references to a bunch of CONFIG options, all of which are boolean. I added is_enabled() helper as scripts/package/{mkdebian,builddeb} do. scripts/gen_autoksyms.sh uses 'eval', stating "to expand the whitelist path". I removed it since it is the issue we are trying to fix. I was a bit worried about the cost of invoking the grep command over again. I extracted the grep parts from it, and measured the cost. It was approximately 0.03 sec, which I hope is acceptable. [test code] $ cat test-grep.sh #!/bin/sh is_enabled() { grep -q "^$1=y" include/config/auto.conf } is_enabled CONFIG_LTO_CLANG is_enabled CONFIG_LTO_CLANG is_enabled CONFIG_STACK_VALIDATION is_enabled CONFIG_UNWINDER_ORC is_enabled CONFIG_FTRACE_MCOUNT_USE_OBJTOOL is_enabled CONFIG_VMLINUX_VALIDATION is_enabled CONFIG_FRAME_POINTER is_enabled CONFIG_GCOV_KERNEL is_enabled CONFIG_LTO_CLANG is_enabled CONFIG_RETPOLINE is_enabled CONFIG_X86_SMAP is_enabled CONFIG_LTO_CLANG is_enabled CONFIG_VMLINUX_MAP is_enabled CONFIG_KALLSYMS_ALL is_enabled CONFIG_KALLSYMS_ABSOLUTE_PERCPU is_enabled CONFIG_KALLSYMS_BASE_RELATIVE is_enabled CONFIG_DEBUG_INFO_BTF is_enabled CONFIG_KALLSYMS is_enabled CONFIG_DEBUG_INFO_BTF is_enabled CONFIG_BPF is_enabled CONFIG_BUILDTIME_TABLE_SORT is_enabled CONFIG_KALLSYMS $ time ./test-grep.sh real 0m0.036s user 0m0.027s sys m0.009s [1]: https://lore.kernel.org/all/1919455.eZKeABUfgV@blindfold/ [2]: https://lore.kernel.org/all/20180219092245.26404-1-richard@nod.at/ [3]: https://lore.kernel.org/all/20210920213957.1064-2-richard@nod.at/ Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <n.schier@avm.de>
2021-07-18scripts/setlocalversion: fix a bug when LOCALVERSION is emptyMikulas Patocka
The commit 042da426f8eb ("scripts/setlocalversion: simplify the short version part") reduces indentation. Unfortunately, it also changes behavior in a subtle way - if the user has empty "LOCALVERSION" variable, the plus sign is appended to the kernel version. It wasn't appended before. This patch reverts to the old behavior - we append the plus sign only if the LOCALVERSION variable is not set. Fixes: 042da426f8eb ("scripts/setlocalversion: simplify the short version part") Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-05-27scripts/setlocalversion: simplify the short version partMasahiro Yamada
Reduce the indentation. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Nico Schottelius <nico-linuxsetlocalversion@schottelius.org>
2021-05-27scripts/setlocalversion: factor out 12-chars hash constructionMasahiro Yamada
Both of if and else parts append exactly 12 hex chars, but in different ways. Factor out the else part because we need to support it without relying on git-describe. Remove the --abbrev=12 option since we do not use the hash from git-describe anyway. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Nico Schottelius <nico-linuxsetlocalversion@schottelius.org>
2021-05-27scripts/setlocalversion: add more comments to -dirty flag detectionMasahiro Yamada
This script stumbled on the read-only source tree over again: - a2bb90a08cb3 ("kbuild: fix delay in setlocalversion on readonly source") - cdf2bc632ebc ("scripts/setlocalversion on write-protected source tree") - 8ef14c2c41d9 ("Revert "scripts/setlocalversion: git: Make -dirty check more robust"") - ff64dd485730 ("scripts/setlocalversion: Improve -dirty check with git-status --no-optional-locks") Add comments to clarify that this script should never ever try to write to the source tree. 'git describe --dirty' might look as a simple solution for appending the -dirty string, but we cannot use it because it creates the .git/index.lock file. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Nico Schottelius <nico-linuxsetlocalversion@schottelius.org>
2021-05-27scripts/setlocalversion: remove workaround for old make-kpkgMasahiro Yamada
This reverts commit b052ce4c840e ("kbuild: fix false positive -dirty tag caused by make-kpkg"). If I understand correctly, this problem occurred in very old versions of make-kpkg. When I tried a newer version, make-kpkg did not touch scripts/package/Makefile. Anyway, Debian uses 'make deb-pkg' instead of make-kpkg these days. Debian handbook [1] mentions it as "the good old days": "CULTURE The good old days of kernel-package Before the Linux build system gained the ability to build proper Debian packages, the recommended way to build such packages was to use make-kpkg from the kernel-package package." [1]: https://debian-handbook.info/browse/stable/sect.kernel-compilation.html Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Nico Schottelius <nico-linuxsetlocalversion@schottelius.org>
2021-05-27scripts/setlocalversion: remove mercurial, svn and git-svn supportsMasahiro Yamada
The mercurial, svn, git-svn supports were added by the following commits: - 3dce174cfcba ("kbuild: support mercurial in setlocalversion") - ba3d05fb6369 ("kbuild: add svn revision information to setlocalversion") - ff80aa97c9b4 ("setlocalversion: add git-svn support") They did not explain why they are useful for the kernel source tree. Let's revert all of them, and see if somebody will complain about it. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Nico Schottelius <nico-linuxsetlocalversion@schottelius.org>
2021-05-02kbuild: replace LANG=C with LC_ALL=CMasahiro Yamada
LANG gives a weak default to each LC_* in case it is not explicitly defined. LC_ALL, if set, overrides all other LC_* variables. LANG < LC_CTYPE, LC_COLLATE, LC_MONETARY, LC_NUMERIC, ... < LC_ALL This is why documentation such as [1] suggests to set LC_ALL in build scripts to get the deterministic result. LANG=C is not strong enough to override LC_* that may be set by end users. [1]: https://reproducible-builds.org/docs/locales/ Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Reviewed-by: Matthias Maennich <maennich@google.com> Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net> (mptcp) Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-25scripts/setlocalversion: make git describe output more reliableRasmus Villemoes
When building for an embedded target using Yocto, we're sometimes observing that the version string that gets built into vmlinux (and thus what uname -a reports) differs from the path under /lib/modules/ where modules get installed in the rootfs, but only in the length of the -gabc123def suffix. Hence modprobe always fails. The problem is that Yocto has the concept of "sstate" (shared state), which allows different developers/buildbots/etc. to share build artifacts, based on a hash of all the metadata that went into building that artifact - and that metadata includes all dependencies (e.g. the compiler used etc.). That normally works quite well; usually a clean build (without using any sstate cache) done by one developer ends up being binary identical to a build done on another host. However, one thing that can cause two developers to end up with different builds [and thus make one's vmlinux package incompatible with the other's kernel-dev package], which is not captured by the metadata hashing, is this `git describe`: The output of that can be affected by (1) git version: before 2.11 git defaulted to a minimum of 7, since 2.11 (git.git commit e6c587) the default is dynamic based on the number of objects in the repo (2) hence even if both run the same git version, the output can differ based on how many remotes are being tracked (or just lots of local development branches or plain old garbage) (3) and of course somebody could have a core.abbrev config setting in ~/.gitconfig So in order to avoid `uname -a` output relying on such random details of the build environment which are rather hard to ensure are consistent between developers and buildbots, make sure the abbreviated sha1 always consists of exactly 12 hex characters. That is consistent with the current rule for -stable patches, and is almost always enough to identify the head commit unambigously - in the few cases where it does not, the v5.4.3-00021- prefix would certainly nail it down. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2019-11-11scripts: setlocalversion: replace backquote to dollar parenthesisBhaskar Chowdhury
This patch replaces backquote to dollar parenthesis syntax for better readability. Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Nico Schottelius <nico-linuxsetlocalversion@schottelius.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-10-15scripts: setlocalversion: fix a bashismRandy Dunlap
Fix bashism reported by checkbashisms by using only one '=': possible bashism in scripts/setlocalversion line 96 (should be 'b = a'): if [ "`hg log -r . --template '{latesttagdistance}'`" == "1" ]; then Fixes: 38b3439d84f4 ("setlocalversion: update mercurial tag parsing") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Mike Crowe <mcrowe@zipitwireless.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-10-05scripts/setlocalversion: clear local variable to make it work for shMasahiro Yamada
Geert Uytterhoeven reports a strange side-effect of commit 858805b336be ("kbuild: add $(BASH) to run scripts with bash-extension"), which inserts the contents of a localversion file in the build directory twice. [Steps to Reproduce] $ echo bar > localversion $ mkdir build $ cd build/ $ echo foo > localversion $ make -s -f ../Makefile defconfig include/config/kernel.release $ cat include/config/kernel.release 5.4.0-rc1foofoobar This comes down to the behavior change of local variables. The 'man sh' on my Ubuntu machine, where sh is an alias to dash, explains as follows: When a variable is made local, it inherits the initial value and exported and readonly flags from the variable with the same name in the surrounding scope, if there is one. Otherwise, the variable is initially unset. [Test Code] foo () { local res echo "res: $res" } res=1 foo [Result] $ sh test.sh res: 1 $ bash test.sh res: So, scripts/setlocalversion correctly works only for bash in spite of its hashbang being #!/bin/sh. Nobody had noticed it before because CONFIG_SHELL was previously set to bash almost all the time. Now that CONFIG_SHELL is set to sh, we must write portable and correct code. I gave the Fixes tag to the commit that uncovered the issue. Clear the variable 'res' in collect_files() to make it work for sh (and it also works on distributions where sh is an alias to bash). Fixes: 858805b336be ("kbuild: add $(BASH) to run scripts with bash-extension") Reported-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-11-21scripts/setlocalversion: Improve -dirty check with git-status ↵Brian Norris
--no-optional-locks git-diff-index does not refresh the index for you, so using it for a "-dirty" check can give misleading results. Commit 6147b1cf19651 ("scripts/setlocalversion: git: Make -dirty check more robust") tried to fix this by switching to git-status, but it overlooked the fact that git-status also writes to the .git directory of the source tree, which is definitely not kosher for an out-of-tree (O=) build. That is getting reverted. Fortunately, git-status now supports avoiding writing to the index via the --no-optional-locks flag, as of git 2.14. It still calculates an up-to-date index, but it avoids writing it out to the .git directory. So, let's retry the solution from commit 6147b1cf19651 using this new flag first, and if it fails, we assume this is an older version of git and just use the old git-diff-index method. It's hairy to get the 'grep -vq' (inverted matching) correct by stashing the output of git-status (you have to be careful about the difference betwen "empty stdin" and "blank line on stdin"), so just pipe the output directly to grep and use a regex that's good enough for both the git-status and git-diff-index version. Cc: Christian Kujau <lists@nerdbynature.de> Cc: Guenter Roeck <linux@roeck-us.net> Suggested-by: Alexander Kapshuk <alexander.kapshuk@gmail.com> Signed-off-by: Brian Norris <briannorris@chromium.org> Tested-by: Genki Sky <sky@genki.is> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-11-11Revert "scripts/setlocalversion: git: Make -dirty check more robust"Guenter Roeck
This reverts commit 6147b1cf19651c7de297e69108b141fb30aa2349. The reverted patch results in attempted write access to the source repository, even if that repository is mounted read-only. Output from "strace git status -uno --porcelain": getcwd("/tmp/linux-test", 129) = 16 open("/tmp/linux-test/.git/index.lock", O_RDWR|O_CREAT|O_EXCL|O_CLOEXEC, 0666) = -1 EROFS (Read-only file system) While git appears to be able to handle this situation, a monitored build environment (such as the one used for Chrome OS kernel builds) may detect it and bail out with an access violation error. On top of that, the attempted write access suggests that git _will_ write to the file even if a build output directory is specified. Users may have the reasonable expectation that the source repository remains untouched in that situation. Fixes: 6147b1cf19651 ("scripts/setlocalversion: git: Make -dirty check more robust" Cc: Genki Sky <sky@genki.is> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-09-01scripts/setlocalversion: git: Make -dirty check more robustGenki Sky
$(git diff-index) relies on the index being refreshed. This refreshing of the index used to happen, but was removed in cdf2bc632ebc ("scripts/setlocalversion on write-protected source tree", 2013-06-14) due to issues with a read-only filesystem. If the index is not refreshed, one runs into problems. E.g. as described in [0], git stores the uid in its index, so even if just the uid has changed (or git is tricked into thinking so), then we will think the tree is dirty. So as in [1], if you package linux-git with a system that uses fakeroot(1), you get a "-dirty" version. Unless you manually $(git update-index --refresh) themselves. The simplest solution seems to be $(git status --porcelain), with an additional flag saying "ignore untracked files". It seems clearer about what it does, and avoids issues regarding cached indexes and writable filesystems, but still has stable output for scripting. [0]: https://public-inbox.org/git/0190ae30-b6c8-2a8b-b1fb-fd9d84e6dfdf@oracle.com/ [1]: https://bbs.archlinux.org/viewtopic.php?id=236702 Signed-off-by: Genki Sky <sky@genki.is> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-20kbuild: setlocalversion: print error to STDERRWolfram Sang
I tried to use 'make O=...' from an unclean source tree. This triggered the error path of setlocalversion. But by printing to STDOUT, it created a broken localversion which then caused another (unrelated) error: "4.7.0-rc2Error: kernelrelease not valid - run make prepare to update it" exceeds 64 characters After printing to STDERR, the true build error gets displayed later: /home/wsa/Kernel/linux is not clean, please run 'make mrproper' in the '/home/wsa/Kernel/linux' directory. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Michal Marek <mmarek@suse.com>
2014-01-03Fix detectition of kernel git repository in setlocalversion script [take #2]Franck Bui-Huu
setlocalversion script was testing the presence of .git directory in order to find out if git is used as SCM to track the current kernel project. However in some cases, .git is not a directory but can be a file: when the kernel is a git submodule part of a git super project for example. This patch just fixes this by using 'git rev-parse --show-cdup' to check that the current directory is the kernel git topdir. This has the advantage to not test and rely on git internal infrastructure directly. Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-06-24scripts/setlocalversion on write-protected source treeChristian Kujau
I just stumbled across another[0] issue when scripts/setlocalversion operates on a write-protected source tree. Back then[0] the source tree was on an read-only NFS share, so "test -w" was introduced before "git update-index" was run. This time, the source tree is on read/write NFS share, but the permissions are world-readable and only a specific user (or root) can write. Thus, "test -w ." returns "0" and then runs "git update-index", producing the following message (on a dirty tree): fatal: Unable to create '/usr/local/src/linux-git/.git/index.lock': Permission denied While it says "fatal", compilation continues just fine. However, I don't think a kernel compilation should alter the source tree (or the .git directory) in any way and I don't see how removing "git update-index" could do any harm. The Mercurial and SVN routines in scripts/setlocalversion don't have any tree-modifying commands, AFAICS. So, maybe the patch below would be acceptable. [0] https://patchwork.kernel.org/patch/29718/ Signed-off-by: Christian Kujau <lists@nerdbynature.de> Cc: Nico Schottelius <nico-linuxsetlocalversion@schottelius.org> Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-02-22kbuild: Unset language specific variables in setlocalversion scriptChristophe Leroy
This patch allows the use of setlocalversion script regardless of the language parameters. Otherwise, the `svn info 2>/dev/null | grep '^Last Changed Rev'` returns nothing because for instance, in French the text 'Last Changed Rev' is replaced by 'Révision de la dernière modification' Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michal Marek <mmarek@suse.cz>
2012-03-26setlocalversion: Use "grep -q" instead of piping output to "read dummy"Roland Dreier
In some circumstances (eg when running a build in an emacs shell buffer), I get a spew of messages like grep: writing output: Broken pipe from setlocalversion, because the "read" subshell apparently exits as soon as it reads one line and gives EPIPE to grep. It's not clear to me why this way of writing the check was used instead of just using grep -q to suppress output, but unless there is some deep reason I don't know, this way looks cleaner to me anyway, and gets rid of the ugly message spew. (I double checked at http://pubs.opengroup.org/onlinepubs/009604499/utilities/grep.html and "grep -q" is specified in POSIX / SuS, so hopefully even people cross-compiling the kernel on some bizarre host OS can't complain about this change) Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-01-15setlocalversion: update mercurial tag parsingMike Crowe
The tag output of hg doesn't quite match what setlocalversion currently expects, so update it to handle the latest format. Signed-off-by: Mike Crowe <mcrowe@zipitwireless.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-10-28Merge branch 'kbuild' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6 * 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: initramfs: Fix build break on symbol-prefixed archs initramfs: fix initramfs size calculation initramfs: generalize initramfs_data.xxx.S variants scripts/kallsyms: Enable error messages while hush up unnecessary warnings scripts/setlocalversion: update comment kbuild: Use a single clean rule for kernel and external modules kbuild: Do not run make clean in $(srctree) scripts/mod/modpost.c: fix commentary accordingly to last changes kbuild: Really don't clean bounds.h and asm-offsets.h
2010-09-06scripts/setlocalversion: update commentMichael Prokop
A tagged repository state isn't enough, git describe only looks at signed or annotated tags (git tag -a/-s). This documentation update makes sure the comment matches the current behaviour. Signed-off-by: Michael Prokop <mika@grml.org> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-08-21setlocalversion: Ignote SCMs above the linux source treeMichal Marek
Dan McGee <dpmcgee@gmail.com> writes: > Note that when in git, you get the appended "+" sign. If > LOCALVERSION_AUTO is set, you will get something like > "eee-gb01b08c-dirty" (whereas the copy of the tree in /tmp still > returns "eee"). It doesn't matter whether the working tree is dirty or > clean. > > Is there a way to disable this? I'm building from a clean tarball that > just happens to be unpacked inside a git repository. One would think > setting LOCALVERSION_AUTO to false would do it, but no such luck... Fix this by checking if the kernel source tree is the root of the git or hg repository. No fix for svn: If the kernel source is not tracked in the svn repository, it works as expected, otherwise determining the 'repository root' is not really a defined task. Reported-and-tested-by: Dan McGee <dpmcgee@gmail.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-08-13setlocalversion: fix version for untaged nontip mercurial revsMilton Miller
The manpage for cut says it will return all lines without the delimiter unless -s is specified. When I backed up my mecurial tree to generate modules, I found that the scm part of localversion was turning up blank. Signed-off-by: Milton Miller <miltonm@bga.com> Cc: Michal Marek <mmarek@suse.cz> Cc: "Michał Górny" <gentoo@mgorny.alt.pl> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-07-21kbuild: Fix make rpmMichal Marek
make rpm was broken by commit 0915512: make clean set -e; cd ..; ln -sf /usr/src/iwlwifi-2.6 kernel-2.6.35rc4wl /bin/sh /usr/src/iwlwifi-2.6/scripts/setlocalversion --scm-only > /usr/src/iwlwifi-2.6/.scmversion cat: .scmversion: input file is output file make[1]: *** [rpm] Error 1 Reported-and-tested-by: "Zheng, Jiajia" <jiajia.zheng@intel.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-07-20kbuild: Make the setlocalversion script POSIX-compliantMichał Górny
The 'source' builtin is a bash alias to the '.' (dot) builtin. While the former is supported only by bash, the latter is specified in POSIX and works fine with all POSIX-compliant shells I am aware of. The '$_' special parameter is specific to bash. It is partially supported in dash too but it always evaluates to the current script path (which causes the script to enter a loop recursively re-executing itself). This is why I have replaced the two occurences of '$_' with the explicit parameter. The 'local' builtin is another example of bash-specific code. Although it is supported by all POSIX-compliant shells I am aware of, it is not part of POSIX specification and thus the code should not rely on it assigning a specific value to the local variable. Moreover, the 'posh' shell has a limited version of 'local' builtin not supporting direct variable assignments. Thus, I have broken one of the 'local' declarations down into a (non-POSIX) 'local' declaration and a plain (POSIX-compliant) variable assignment. Signed-off-by: Michał Górny <gentoo@mgorny.alt.pl> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-06-18kbuild: Clean up and speed up the localversion logicMichal Marek
Now that we run scripts/setlocalversion during every build, it makes sense to move all the localversion logic there. This cleans up the toplevel Makefile and also makes sure that the script is called only once in 'make prepare' (previously, it would be called every time due to a variable expansion in an ifneq statement). No user-visible change is intended, unless one runs the setlocalversion script directly. Reported-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: David Rientjes <rientjes@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: Nico Schottelius <nico-linuxsetlocalversion@schottelius.org> Signed-off-by: Michal Marek <mmarek@suse.cz>
2009-06-14kbuild: fix delay in setlocalversion on readonly sourceNico Schottelius
Do not update index on read only media. Idea published by Christian Kujau <lists@nerdbynature.de>. Cc: Nico Schottelius <nico@ikn.schottelius.org> Cc: Christian Kujau <lists@nerdbynature.de>
2009-05-19Fix scripts/setlocalversion with tagged git commitNico Schottelius
Produce correct output for - tagged commit (v2.6.30-rc6) - past tagged commit (v2.6.30-rc5-299-g7c7327d) - no tag Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-01kbuild: fix scripts/setlocalversion with gitNico Schottelius
When using trees like wireless-testing, which have untagged tags, scripts/setlocalversion does not display any git indication for localversion. This patch fixes it: If git is available, but no usable tag is found, it uses -g${head}. It skips the detection of unanottated tags via git name-rev. Signed-off-by: Nico Schottelius <nico@ikn.schottelius.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-04-11kbuild: use git svn instead of git-svn in setlocalversionPeter Korsgaard
Use the correct git <subcmd> syntax instead of the deprecated git-<subcmd>. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-02-15kbuild,setlocalversion: shorten the make time when using svnMike Frysinger
Don't bother doing `svn st` as it takes a retarded amount of time when the source is cold Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-12-03setlocalversion: add git-svn supportPeter Korsgaard
Print svn revision in addition to git info on git-svn repos. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-12-03setlocalversion: print correct subversion revisionPeter Korsgaard
Output svn revision of latest change, instead of repo revision as thats what we're interested in (especially when working on a branch/tag). Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-10-29kbuild: tag with git revision when git describe is missingTrent Piepho
setlocalversion used to use an abbreviated git commit sha1 to generate the tag. This was changed in commit d882421f4e08ddf0a94245cdbe516db260aa6f41 "kbuild: change CONFIG_LOCALVERSION_AUTO to use a git-describe-ish format" to use git describe to come up with a tag. Which is nice, but git describe sometimes can't describe the revision. Commit 56b2f0706d82535fd8d85503f2dcc0be40c8e55d ("setlocalversion: do not describe if there is nothing to describe") addressed this, but there is still no tag generated. So, generate a plain abbreviated sha1 tag like setlocalversion used to when git describe comes up short. Signed-off-by: Trent Piepho <tpiepho@freescale.com> CC: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-10-29kbuild: setlocalversion: dont include svn change countMike Frysinger
The number of pending changes is pretty useless, so encoding it into the version is just annoying by the constant shuffle in corresponding modules. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-07-25setlocalversion: do not describe if there is nothing to describeSebastian Siewior
Jan Engelhardt wrote: > Just a note that when you run git-describe, you should probably quiten it. > > fatal: cannot describe 'bd7364a0fd5a4a2878fe4a224be1b142a4e6698e' > > This happens when tags are not present, which can happen if Linus's tree > is sent upwards again, IOW: > > machine1$ git-clone torvalds/linux-2.6.git > machine1$ git push elsewhere master > > machine2$ git-clone elsewhere:/linux > machine2$ git-describe HEAD > fatal: cannot describe that Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Acked-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-02-03kbuild: add svn revision information to setlocalversionBryan Wu
follow git and mercurial style, include uncommitted changes detect Cc: Frans Pop <elendil@planet.nl> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28kbuild: fix false positive -dirty tag caused by make-kpkgTheodore Ts'o
make-kpkg modifies scripts/package/Makefile and deletes scripts/package/builddeb as part of its build process. Ignore these changes so the tree isn't marked as -dirty, when it is just an artifact of make-kpkg. (make-kpkg clean restores the files to their original state, and these helper scripts won't affect the final compiled kernel in any way.) Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28kbuild: fix scripts/setlocalversion to avoid erroneous -dirty tagTheodore Ts'o
If git's index file is out of date, and some files have been touched such that their timestamp doesn't what is in the index, "git diff-index HEAD" may show that a particular file is dirty, when in fact it really isn't. Running "git update-index" will update the index to avoid these false positives. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>