| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy fixes from Vinod Koul:
- fixes for Qualcomm qmp-combo driver for ordering of drm and type-c
switch registartion due to drivers might not probe defer after having
registered child devices to avoid triggering a probe deferral loop.
This fixes internal display on Lenovo ThinkPad X13s
* tag 'phy-fixes3-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
phy: qcom-qmp-combo: fix type-c switch registration
phy: qcom-qmp-combo: fix drm bridge registration
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Two patches from Heiner for the i801 are targeting muxes discovered
while working on some other features. Essentially, there is a
reordering when adding optional slaves and proper cleanup upon
registering a mux device.
Christophe fixes the exit path in the wmt driver that was leaving the
clocks hanging, and the last fix from Tommy avoids false error reports
in IRQ"
* tag 'i2c-for-6.8-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: aspeed: Fix the dummy irq expected print
i2c: wmt: Fix an error handling path in wmt_i2c_probe()
i2c: i801: Avoid potential double call to gpiod_remove_lookup_table
i2c: i801: Fix using mux_pdev before it's set
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire fix from Takashi Sakamoto:
"A fix to suppress a warning about unreleased IRQ for 1394 OHCI
hardware when disabling MSI.
In Linux kernel v6.5, a PCI driver for 1394 OHCI hardware was
optimized into the managed device resources. Edmund Raile points out
that the change brings the warning about unreleased IRQ at the call of
pci_disable_msi(), since the API expects that the relevant IRQ has
already been released in advance.
As long as the API is called in .remove callback of PCI device
operation, it is prohibited to maintain the IRQ as the part of managed
device resource. As a workaround, the IRQ is explicitly released at
.remove callback, before the call of pci_disable_msi().
pci_disable_msi() is legacy API nowadays in PCI MSI implementation. I
have a plan to replace it with the modern API in the development for
the future version of Linux kernel. So at present I keep them as is"
* tag 'firewire-fixes-6.8-final' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: ohci: prevent leak of left-over IRQ on unbind
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are a few small char/misc and other driver subsystem fixes for
reported issues that have been in my tree.
Included in here are fixes for:
- iio driver fixes for reported problems
- much reported bugfix for a lis3lv02d_i2c regression
- comedi driver bugfix
- mei new device ids
- mei driver fixes
- counter core fix
All of these have been in linux-next with no reported issues, some for
many weeks"
* tag 'char-misc-6.8-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
mei: gsc_proxy: match component when GSC is on different bus
misc: fastrpc: Pass proper arguments to scm call
comedi: comedi_test: Prevent timers rescheduling during deletion
comedi: comedi_8255: Correct error in subdevice initialization
misc: lis3lv02d_i2c: Fix regulators getting en-/dis-abled twice on suspend/resume
iio: accel: adxl367: fix I2C FIFO data register
iio: accel: adxl367: fix DEVID read after reset
iio: pressure: dlhl60d: Initialize empty DLH bytes
iio: imu: inv_mpu6050: fix frequency setting when chip is off
iio: pressure: Fixes BMP38x and BMP390 SPI support
iio: imu: inv_mpu6050: fix FIFO parsing when empty
mei: Add Meteor Lake support for IVSC device
mei: me: add arrow lake point H DID
mei: me: add arrow lake point S DID
counter: fix privdata alignment
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial fixes from Greg KH:
"Here are some small remaining tty/serial driver fixes. Included in
here is fixes for:
- vt unicode buffer corruption fix
- imx serial driver fixes, again
- port suspend fix
- 8250_dw driver fix
- fsl_lpuart driver fix
- revert for the qcom_geni_serial driver to fix a reported regression
All of these have been in linux-next with no reported issues"
* tag 'tty-6.8-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
Revert "tty: serial: simplify qcom_geni_serial_send_chunk_fifo()"
tty: serial: fsl_lpuart: avoid idle preamble pending if CTS is enabled
vt: fix unicode buffer corruption when deleting characters
serial: port: Don't suspend if the port is still busy
serial: 8250_dw: Do not reclock if already at correct rate
tty: serial: imx: Fix broken RS485
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt fixes from Greg KH:
"Here are some small remaining fixes for USB and Thunderbolt drivers.
Included in here are fixes for:
- thunderbold NULL dereference fix
- typec driver fixes
- xhci driver regression fix
- usb-storage divide-by-0 fix
- ncm gadget driver fix
All of these have been in linux-next with no reported issues"
* tag 'usb-6.8-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
xhci: Fix failure to detect ring expansion need.
usb: port: Don't try to peer unused USB ports based on location
usb: gadget: ncm: Fix handling of zero block length packets
usb: typec: altmodes/displayport: create sysfs nodes as driver's default device attribute group
usb: typec: tpcm: Fix PORT_RESET behavior for self powered devices
usb: typec: ucsi: fix UCSI on SM8550 & SM8650 Qualcomm devices
USB: usb-storage: Prevent divide-by-0 error in isd200_ata_command
thunderbolt: Fix NULL pointer dereference in tb_port_update_credits()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
- Fix the PM suspend callback in the STM32 ST32MP257 driver to properly
support suspend
- Drop an extraneous reference put in the debugfs code, this was
confusing the reference counts and causing unsolicited calls to
__free()
* tag 'pinctrl-v6.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: don't put the reference to GPIO device in pinctrl_pins_show()
pinctrl: stm32: fix PM support for stm32mp257
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- a revert of endpoint checks in bcm5974 - the driver is being naughty
and pokes at unclaimed USB interface, so the check fails. We need to
fix the driver to claim both interfaces, and then re-implement the
endpoints check
- a fix to Synaptics RMI driver to avoid UAF on driver unload or device
unbinding
- a few new VID/PIDs added to xpad game controller driver
- a change to gpio_keys_polled driver to quiet it when GPIO causes
probe deferral.
* tag 'input-for-v6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: synaptics-rmi4 - fix UAF of IRQ domain on driver removal
Input: gpio_keys_polled - suppress deferred probe error for gpio
Revert "Input: bcm5974 - check endpoint type before starting traffic"
Input: xpad - add additional HyperX Controller Identifiers
|
|
Pull drm fixes from Dave Airlie:
"Regular fixes (two weeks for i915), scattered across drivers, amdgpu
and i915 being the main ones, with nouveau having a couple of fixes.
One patch got applied for udl, but reverted soon after as the
maintainer has missed some crucial prior discussion.
Seems quiet and normal enough for this stage.
MAINTAINERS
- update email address
core:
- fix polling in certain configurations
buddy:
- fix kunit test warning
panel:
- boe-tv101wum-nl6: timing tuning fixes
i915:
- Fix to extract HDCP information from primary connector
- Check for NULL mmu_interval_notifier before removing
- Fix for #10184: Kernel crash on UHD Graphics 730 (Cc stable)
- Fix for #10284: Boot delay regresion with PSR
- Fix DP connector DSC HW state readout
- Selftest fix to convert msecs to jiffies
xe:
- error path fix
amdgpu:
- SMU14 fix
- Fix possible NULL pointer
- VRR fix
- pwm fix
nouveau:
- fix deadlock in new ioctls fail path
- fix missing locking around object rbtree
udl:
- apply and revert format change"
* tag 'drm-fixes-2024-03-08' of https://gitlab.freedesktop.org/drm/kernel: (21 commits)
nouveau: lock the client object tree.
drm/tests/buddy: fix print format
drm/xe: Return immediately on tile_init failure
drm/amdgpu/pm: Fix the error of pwm1_enable setting
drm/amd/display: handle range offsets in VRR ranges
drm/amd/display: check dc_link before dereferencing
drm/amd/swsmu: modify the gfx activity scaling
Revert "drm/udl: Add ARGB8888 as a format"
drm/i915/panelreplay: Move out psr_init_dpcd() from init_connector()
drm/i915/dp: Fix connector DSC HW state readout
drm/i915/selftests: Fix dependency of some timeouts on HZ
drm/udl: Add ARGB8888 as a format
drm/nouveau: fix stale locked mutex in nouveau_gem_ioctl_pushbuf
drm/i915: Don't explode when the dig port we don't have an AUX CH
MAINTAINERS: Update email address for Tvrtko Ursulin
drm/panel: boe-tv101wum-nl6: Fine tune Himax83102-j02 panel HFP and HBP (again)
drm: Fix output poll work for drm_kms_helper_poll=n
drm/i915: Check before removing mm notifier
drm/i915/hdcp: Extract hdcp structure from correct connector
drm/i915/hdcp: Remove additional timing for reading mst hdcp message
...
|
|
When the i2c error condition occurred and master state was not
idle, the master irq function will goto complete state without any
other interrupt handling. It would cause dummy irq expected print.
Under this condition, assign the irq_status into irq_handle.
For example, when the abnormal start / stop occurred (bit 5) with
normal stop status (bit 4) at same time. Then the normal stop status
would not be handled and it would cause irq expected print in
the aspeed_i2c_bus_irq.
...
aspeed-i2c-bus x. i2c-bus: irq handled != irq.
Expected 0x00000030, but was 0x00000020
...
Fixes: 3e9efc3299dd ("i2c: aspeed: Handle master/slave combined irq events properly")
Cc: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Signed-off-by: Tommy Huang <tommy_huang@aspeedtech.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
wmt_i2c_reset_hardware() calls clk_prepare_enable(). So, should an error
occur after it, it should be undone by a corresponding
clk_disable_unprepare() call, as already done in the remove function.
Fixes: 560746eb79d3 ("i2c: vt8500: Add support for I2C bus on Wondermedia SoCs")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
If registering the platform device fails, the lookup table is
removed in the error path. On module removal we would try to
remove the lookup table again. Fix this by setting priv->lookup
only if registering the platform device was successful.
In addition free the memory allocated for the lookup table in
the error path.
Fixes: d308dfbf62ef ("i2c: mux/i801: Switch to use descriptor passing")
Cc: stable@vger.kernel.org
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
i801_probe_optional_slaves() is called before i801_add_mux().
This results in mux_pdev being checked before it's set by
i801_add_mux(). Fix this by changing the order of the calls.
I consider this safe as I see no dependencies.
Fixes: 80e56b86b59e ("i2c: i801: Simplify class-based client device instantiation")
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
It appears the client object tree has no locking unless I've missed
something else. Fix races around adding/removing client objects,
mostly vram bar mappings.
4562.099306] general protection fault, probably for non-canonical address 0x6677ed422bceb80c: 0000 [#1] PREEMPT SMP PTI
[ 4562.099314] CPU: 2 PID: 23171 Comm: deqp-vk Not tainted 6.8.0-rc6+ #27
[ 4562.099324] Hardware name: Gigabyte Technology Co., Ltd. Z390 I AORUS PRO WIFI/Z390 I AORUS PRO WIFI-CF, BIOS F8 11/05/2021
[ 4562.099330] RIP: 0010:nvkm_object_search+0x1d/0x70 [nouveau]
[ 4562.099503] Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 66 0f 1f 00 0f 1f 44 00 00 48 89 f8 48 85 f6 74 39 48 8b 87 a0 00 00 00 48 85 c0 74 12 <48> 8b 48 f8 48 39 ce 73 15 48 8b 40 10 48 85 c0 75 ee 48 c7 c0 fe
[ 4562.099506] RSP: 0000:ffffa94cc420bbf8 EFLAGS: 00010206
[ 4562.099512] RAX: 6677ed422bceb814 RBX: ffff98108791f400 RCX: ffff9810f26b8f58
[ 4562.099517] RDX: 0000000000000000 RSI: ffff9810f26b9158 RDI: ffff98108791f400
[ 4562.099519] RBP: ffff9810f26b9158 R08: 0000000000000000 R09: 0000000000000000
[ 4562.099521] R10: ffffa94cc420bc48 R11: 0000000000000001 R12: ffff9810f02a7cc0
[ 4562.099526] R13: 0000000000000000 R14: 00000000000000ff R15: 0000000000000007
[ 4562.099528] FS: 00007f629c5017c0(0000) GS:ffff98142c700000(0000) knlGS:0000000000000000
[ 4562.099534] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 4562.099536] CR2: 00007f629a882000 CR3: 000000017019e004 CR4: 00000000003706f0
[ 4562.099541] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 4562.099542] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 4562.099544] Call Trace:
[ 4562.099555] <TASK>
[ 4562.099573] ? die_addr+0x36/0x90
[ 4562.099583] ? exc_general_protection+0x246/0x4a0
[ 4562.099593] ? asm_exc_general_protection+0x26/0x30
[ 4562.099600] ? nvkm_object_search+0x1d/0x70 [nouveau]
[ 4562.099730] nvkm_ioctl+0xa1/0x250 [nouveau]
[ 4562.099861] nvif_object_map_handle+0xc8/0x180 [nouveau]
[ 4562.099986] nouveau_ttm_io_mem_reserve+0x122/0x270 [nouveau]
[ 4562.100156] ? dma_resv_test_signaled+0x26/0xb0
[ 4562.100163] ttm_bo_vm_fault_reserved+0x97/0x3c0 [ttm]
[ 4562.100182] ? __mutex_unlock_slowpath+0x2a/0x270
[ 4562.100189] nouveau_ttm_fault+0x69/0xb0 [nouveau]
[ 4562.100356] __do_fault+0x32/0x150
[ 4562.100362] do_fault+0x7c/0x560
[ 4562.100369] __handle_mm_fault+0x800/0xc10
[ 4562.100382] handle_mm_fault+0x17c/0x3e0
[ 4562.100388] do_user_addr_fault+0x208/0x860
[ 4562.100395] exc_page_fault+0x7f/0x200
[ 4562.100402] asm_exc_page_fault+0x26/0x30
[ 4562.100412] RIP: 0033:0x9b9870
[ 4562.100419] Code: 85 a8 f7 ff ff 8b 8d 80 f7 ff ff 89 08 e9 18 f2 ff ff 0f 1f 84 00 00 00 00 00 44 89 32 e9 90 fa ff ff 0f 1f 84 00 00 00 00 00 <44> 89 32 e9 f8 f1 ff ff 0f 1f 84 00 00 00 00 00 66 44 89 32 e9 e7
[ 4562.100422] RSP: 002b:00007fff9ba2dc70 EFLAGS: 00010246
[ 4562.100426] RAX: 0000000000000004 RBX: 000000000dd65e10 RCX: 000000fff0000000
[ 4562.100428] RDX: 00007f629a882000 RSI: 00007f629a882000 RDI: 0000000000000066
[ 4562.100432] RBP: 00007fff9ba2e570 R08: 0000000000000000 R09: 0000000123ddf000
[ 4562.100434] R10: 0000000000000001 R11: 0000000000000246 R12: 000000007fffffff
[ 4562.100436] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
[ 4562.100446] </TASK>
[ 4562.100448] Modules linked in: nf_conntrack_netbios_ns nf_conntrack_broadcast nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables libcrc32c nfnetlink cmac bnep sunrpc iwlmvm intel_rapl_msr intel_rapl_common snd_sof_pci_intel_cnl x86_pkg_temp_thermal intel_powerclamp snd_sof_intel_hda_common mac80211 coretemp snd_soc_acpi_intel_match kvm_intel snd_soc_acpi snd_soc_hdac_hda snd_sof_pci snd_sof_xtensa_dsp snd_sof_intel_hda_mlink snd_sof_intel_hda snd_sof kvm snd_sof_utils snd_soc_core snd_hda_codec_realtek libarc4 snd_hda_codec_generic snd_compress snd_hda_ext_core vfat fat snd_hda_intel snd_intel_dspcfg irqbypass iwlwifi snd_hda_codec snd_hwdep snd_hda_core btusb btrtl mei_hdcp iTCO_wdt rapl mei_pxp btintel snd_seq iTCO_vendor_support btbcm snd_seq_device intel_cstate bluetooth snd_pcm cfg80211 intel_wmi_thunderbolt wmi_bmof intel_uncore snd_timer mei_me snd ecdh_generic i2c_i801
[ 4562.100541] ecc mei i2c_smbus soundcore rfkill intel_pch_thermal acpi_pad zram nouveau drm_ttm_helper ttm gpu_sched i2c_algo_bit drm_gpuvm drm_exec mxm_wmi drm_display_helper drm_kms_helper drm crct10dif_pclmul crc32_pclmul nvme e1000e crc32c_intel nvme_core ghash_clmulni_intel video wmi pinctrl_cannonlake ip6_tables ip_tables fuse
[ 4562.100616] ---[ end trace 0000000000000000 ]---
Signed-off-by: Dave Airlie <airlied@redhat.com>
Cc: stable@vger.kernel.org
|
|
https://anongit.freedesktop.org/git/drm/drm-misc into drm-fixes
A connector status polling fix, a timings fix for the Himax83102-j02
panel, a deadlock fix for nouveau, A controversial format fix for udl
that got reverted to allow further discussion, and a build fix for the
drm/buddy kunit tests.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240307-quizzical-auburn-starling-0ade8f@houat
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.8-2024-03-07:
amdgpu:
- SMU14 fix
- Fix possible NULL pointer
- VRR fix
- pwm fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240307143318.2869884-1-alexander.deucher@amd.com
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
Driver Changes:
- An error path fix.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Zema9lLEdtMISljc@fedora
|
|
Calling irq_domain_remove() will lead to freeing the IRQ domain
prematurely. The domain is still referenced and will be attempted to get
used via rmi_free_function_list() -> rmi_unregister_function() ->
irq_dispose_mapping() -> irq_get_irq_data()'s ->domain pointer.
With PaX's MEMORY_SANITIZE this will lead to an access fault when
attempting to dereference embedded pointers, as in Torsten's report that
was faulting on the 'domain->ops->unmap' test.
Fix this by releasing the IRQ domain only after all related IRQs have
been deactivated.
Fixes: 24d28e4f1271 ("Input: synaptics-rmi4 - convert irq distribution to irq_domain")
Reported-by: Torsten Hilbrich <torsten.hilbrich@secunet.com>
Signed-off-by: Mathias Krause <minipli@grsecurity.net>
Link: https://lore.kernel.org/r/20240222142654.856566-1-minipli@grsecurity.net
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fix from Mark Brown:
"One small fix for the newly added cs42l43 driver which would have
caused it problems working in some system configurations by needlessly
restricting chip select configurations"
* tag 'spi-fix-v6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: cs42l43: Don't limit native CS to the first chip select
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A couple of small fixes for the rk808 driver, the regulator voltage
configurations were incorrectly described.
The changes are not expected to have practical impact but given that
we're dealing with power it's generally better to follow the hardware
specification as closely as we can to avoid unexpected stresses"
* tag 'regulator-fix-v6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: rk808: fix LDO range on RK806
regulator: rk808: fix buck range on RK806
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bpf, ipsec and netfilter.
No solution yet for the stmmac issue mentioned in the last PR, but it
proved to be a lockdep false positive, not a blocker.
Current release - regressions:
- dpll: move all dpll<>netdev helpers to dpll code, fix build
regression with old compilers
Current release - new code bugs:
- page_pool: fix netlink dump stop/resume
Previous releases - regressions:
- bpf: fix verifier to check bpf_func_state->callback_depth when
pruning states as otherwise unsafe programs could get accepted
- ipv6: avoid possible UAF in ip6_route_mpath_notify()
- ice: reconfig host after changing MSI-X on VF
- mlx5:
- e-switch, change flow rule destination checking
- add a memory barrier to prevent a possible null-ptr-deref
- switch to using _bh variant of of spinlock where needed
Previous releases - always broken:
- netfilter: nf_conntrack_h323: add protection for bmp length out of
range
- bpf: fix to zero-initialise xdp_rxq_info struct before running XDP
program in CPU map which led to random xdp_md fields
- xfrm: fix UDP encapsulation in TX packet offload
- netrom: fix data-races around sysctls
- ice:
- fix potential NULL pointer dereference in ice_bridge_setlink()
- fix uninitialized dplls mutex usage
- igc: avoid returning frame twice in XDP_REDIRECT
- i40e: disable NAPI right after disabling irqs when handling
xsk_pool
- geneve: make sure to pull inner header in geneve_rx()
- sparx5: fix use after free inside sparx5_del_mact_entry
- dsa: microchip: fix register write order in ksz8_ind_write8()
Misc:
- selftests: mptcp: fixes for diag.sh"
* tag 'net-6.8-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (63 commits)
net: pds_core: Fix possible double free in error handling path
netrom: Fix data-races around sysctl_net_busy_read
netrom: Fix a data-race around sysctl_netrom_link_fails_count
netrom: Fix a data-race around sysctl_netrom_routing_control
netrom: Fix a data-race around sysctl_netrom_transport_no_activity_timeout
netrom: Fix a data-race around sysctl_netrom_transport_requested_window_size
netrom: Fix a data-race around sysctl_netrom_transport_busy_delay
netrom: Fix a data-race around sysctl_netrom_transport_acknowledge_delay
netrom: Fix a data-race around sysctl_netrom_transport_maximum_tries
netrom: Fix a data-race around sysctl_netrom_transport_timeout
netrom: Fix data-races around sysctl_netrom_network_ttl_initialiser
netrom: Fix a data-race around sysctl_netrom_obsolescence_count_initialiser
netrom: Fix a data-race around sysctl_netrom_default_path_quality
netfilter: nf_conntrack_h323: Add protection for bmp length out of range
netfilter: nf_tables: mark set as dead when unbinding anonymous set with timeout
netfilter: nft_ct: fix l3num expectations with inet pseudo family
netfilter: nf_tables: reject constant set with timeout
netfilter: nf_tables: disallow anonymous set with timeout flag
net/rds: fix WARNING in rds_conn_connect_if_down
net: dsa: microchip: fix register write order in ksz8_ind_write8()
...
|
|
When auxiliary_device_add() returns error and then calls
auxiliary_device_uninit(), Callback function pdsc_auxbus_dev_release
calls kfree(padev) to free memory. We shouldn't call kfree(padev)
again in the error handling path.
Fix this by cleaning up the redundant kfree() and putting
the error handling back to where the errors happened.
Fixes: 4569cce43bc6 ("pds_core: add auxiliary_bus devices")
Signed-off-by: Yongzhi Liu <hyperlyzcs@gmail.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://lore.kernel.org/r/20240306105714.20597-1-hyperlyzcs@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This will report a build warning once we have: 806cb2270237 ("kunit:
Annotate _MSG assertion variants with gnu printf specifiers").
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: c70703320e55 ("drm/tests/drm_buddy: add alloc_range_bias test")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Reviewed-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Link: https://lore.kernel.org/r/20240229095225.242795-2-matthew.auld@intel.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
There's no reason to proceed with applying workaround and initing
sysfs if we are going to abort the probe upon failure.
Fixes: e5a845fd8fa4 ("drm/xe: Add sysfs entry for tile")
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240306203110.146387-1-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit af7b93d1d7eeeef674681ddea875be6a29857a5d)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2024-03-06
We've added 5 non-merge commits during the last 1 day(s) which contain
a total of 5 files changed, 77 insertions(+), 4 deletions(-).
The main changes are:
1) Fix BPF verifier to check bpf_func_state->callback_depth when pruning
states as otherwise unsafe programs could get accepted,
from Eduard Zingerman.
2) Fix to zero-initialise xdp_rxq_info struct before running XDP program in
CPU map which led to random xdp_md fields, from Toke Høiland-Jørgensen.
3) Fix bonding XDP feature flags calculation when bonding device has no
slave devices anymore, from Daniel Borkmann.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
cpumap: Zero-initialise xdp_rxq_info struct before running XDP program
selftests/bpf: Fix up xdp bonding test wrt feature flags
xdp, bonding: Fix feature flags when there are no slave devs anymore
selftests/bpf: test case for callback_depth states pruning logic
bpf: check bpf_func_state->callback_depth when pruning states
====================
Link: https://lore.kernel.org/r/20240306220309.13534-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix the pwm_mode value error which used for
pwm1_enable setting
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Need to check the offset bits for values greater than 255.
v2: also update amdgpu_dm_connector values.
Suggested-by: Mano Ségransan <mano.segransan@protonmail.com>
Tested-by: Mano Ségransan <mano.segransan@protonmail.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3203
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:6683 amdgpu_dm_connector_funcs_force()
warn: variable dereferenced before check 'dc_link' (see line 6663)
Fixes: 967176179215 ("drm/amd/display: fix null-pointer dereference on edid reading")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add an if condition for gfx activity because the scaling has been changed after smu fw version 5d4600.
And remove a warning log.
Signed-off-by: Li Ma <li.ma@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.7.x
|
|
As the chip selects can be configured through ACPI/OF/swnode, and
the set_cs() callback will only be called when a native chip select
is being used, there is no reason for the driver to only support the
native chip select as the first chip select. Remove the check that
introduces this limitation.
Fixes: ef75e767167a ("spi: cs42l43: Add SPI controller support")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://msgid.link/r/20240306161004.2205113-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"These should be the final fixes for the soc tree for 6.8, as usual
they mostly deal wtih dts files:
- Qualcomm fixes for pcie4 on sc8280xp, a revert of msm8996 mpm
support, sm6115 interconnect and sm8650 gpio.
- Two fixes for Tegra234 ethernet
- A Makefile fix to actually build the allwinner based orange pi zero
2w device tree
- Fixes for clocks and reset on imx8mp and a DSI display regression
on imx7.
The non-DT fixes are:
- Firmware fixes addressing a kernel panic in op-tee and a minor
regression in microchip/riscv.
- A defconfig change to bring back backlight support after a Kconfig
change"
* tag 'arm-fixes-6.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
firmware: microchip: Fix over-requested allocation size
tee: optee: Fix kernel panic caused by incorrect error handling
Revert "arm64: dts: qcom: msm8996: Hook up MPM"
arm64: dts: qcom: sc8280xp-x13s: limit pcie4 link speed
arm64: dts: qcom: sc8280xp-crd: limit pcie4 link speed
arm64: dts: imx8mp: Fix LDB clocks property
arm64: dts: imx8mp: Fix TC9595 reset GPIO on DH i.MX8M Plus DHCOM SoM
MAINTAINERS: Use a proper mailinglist for NXP i.MX development
ARM: dts: imx7: remove DSI port endpoints
arm64: dts: allwinner: h616: Add Orange Pi Zero 2W to Makefile
ARM: imx_v6_v7_defconfig: Restore CONFIG_BACKLIGHT_CLASS_DEVICE
arm64: tegra: Fix Tegra234 MGBE power-domains
arm64: tegra: Set the correct PHY mode for MGBE
arm64: dts: qcom: sm6115: Fix missing interconnect-names
arm64: dts: qcom: sm8650-mtp: add gpio74 as reserved gpio
arm64: dts: qcom: sm8650-qrd: add gpio74 as reserved gpio
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"Fix potential use-after-frees in rk3288 and sun8i-ce"
* tag 'v6.8-p6' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: rk3288 - Fix use after free in unprepare
crypto: sun8i-ce - Fix use after free in unprepare
|
|
This reverts commit 95bf25bb9ed5dedb7fb39f76489f7d6843ab0475.
Apparently there was a previous discussion about emulation of formats
and it was decided XRGB8888 was the only format to support for legacy
userspace [1]. Remove ARGB8888. Userspace needs to be fixed to accept
XRGB8888.
[1] https://lore.kernel.org/r/60dc7697-d7a0-4bf4-a22e-32f1bbb792c2@suse.de
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240306063721.1.I4a32475190334e1fa4eef4700ecd2787a43c94b5@changeid
|
|
Due to a long-standing issue in driver core, drivers may not probe defer
after having registered child devices to avoid triggering a probe
deferral loop (see fbc35b45f9f6 ("Add documentation on meaning of
-EPROBE_DEFER")).
Move registration of the typec switch to after looking up clocks and
other resources.
Note that PHY creation can in theory also trigger a probe deferral when
a 'phy' supply is used. This does not seem to affect the QMP PHY driver
but the PHY subsystem should be reworked to address this (i.e. by
separating initialisation and registration of the PHY).
Fixes: 2851117f8f42 ("phy: qcom-qmp-combo: Introduce orientation switching")
Cc: stable@vger.kernel.org # 6.5
Cc: Bjorn Andersson <quic_bjorande@quicinc.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240217150228.5788-7-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Due to a long-standing issue in driver core, drivers may not probe defer
after having registered child devices to avoid triggering a probe
deferral loop (see fbc35b45f9f6 ("Add documentation on meaning of
-EPROBE_DEFER")).
This could potentially also trigger a bug in the DRM bridge
implementation which does not expect bridges to go away even if device
links may avoid triggering this (when enabled).
Move registration of the DRM aux bridge to after looking up clocks and
other resources.
Note that PHY creation can in theory also trigger a probe deferral when
a 'phy' supply is used. This does not seem to affect the QMP PHY driver
but the PHY subsystem should be reworked to address this (i.e. by
separating initialisation and registration of the PHY).
Fixes: 35921910bbd0 ("phy: qcom: qmp-combo: switch to DRM_AUX_BRIDGE")
Fixes: 1904c3f578dc ("phy: qcom-qmp-combo: Introduce drm_bridge")
Cc: stable@vger.kernel.org # 6.5
Cc: Bjorn Andersson <quic_bjorande@quicinc.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240217150228.5788-6-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Move psr_init_dpcd() from init-connector to connector-detect
function. The dpcd probe for checking panel replay capability
for external dp connector is causing delay during boot which can
be optimized by moving dpcd probe to connector specific detect().
v1: Initial version.
v2: Add details in commit description. [Jani]
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10284
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Fixes: cceeaa312d39 ("drm/i915/panelreplay: Enable panel replay dpcd initialization for DP")
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240229043716.4065760-1-animesh.manna@intel.com
(cherry picked from commit 1cca19bf296fae0636a637b48d195ac6b4d430c9)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Commit 5a95f1ded28691e6 ("firewire: ohci: use devres for requested IRQ")
also removed the call to free_irq() in pci_remove(), leading to a
leftover irq of devm_request_irq() at pci_disable_msi() in pci_remove()
when unbinding the driver from the device
remove_proc_entry: removing non-empty directory 'irq/136', leaking at
least 'firewire_ohci'
Call Trace:
? remove_proc_entry+0x19c/0x1c0
? __warn+0x81/0x130
? remove_proc_entry+0x19c/0x1c0
? report_bug+0x171/0x1a0
? console_unlock+0x78/0x120
? handle_bug+0x3c/0x80
? exc_invalid_op+0x17/0x70
? asm_exc_invalid_op+0x1a/0x20
? remove_proc_entry+0x19c/0x1c0
unregister_irq_proc+0xf4/0x120
free_desc+0x3d/0xe0
? kfree+0x29f/0x2f0
irq_free_descs+0x47/0x70
msi_domain_free_locked.part.0+0x19d/0x1d0
msi_domain_free_irqs_all_locked+0x81/0xc0
pci_free_msi_irqs+0x12/0x40
pci_disable_msi+0x4c/0x60
pci_remove+0x9d/0xc0 [firewire_ohci
01b483699bebf9cb07a3d69df0aa2bee71db1b26]
pci_device_remove+0x37/0xa0
device_release_driver_internal+0x19f/0x200
unbind_store+0xa1/0xb0
remove irq with devm_free_irq() before pci_disable_msi()
also remove it in fail_msi: of pci_probe() as this would lead to
an identical leak
Cc: stable@vger.kernel.org
Fixes: 5a95f1ded28691e6 ("firewire: ohci: use devres for requested IRQ")
Signed-off-by: Edmund Raile <edmund.raile@proton.me>
Link: https://lore.kernel.org/r/20240229144723.13047-2-edmund.raile@proton.me
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
|
|
The DSC HW state of DP connectors is read out during driver loading and
system resume in intel_modeset_update_connector_atomic_state(). This
function is called for all connectors though and so the state of DSI
connectors will also get updated incorrectly, triggering a WARN there
wrt. the DSC decompression AUX device.
Fix the above by moving the DSC state readout to a new DP connector
specific sync_state() hook. This is anyway the logical place to update
the connector object's state vs. the connector's atomic state.
Fixes: b2608c6b3212 ("drm/i915/dp_mst: Enable MST DSC decompression for all streams")
Reported-and-tested-by: Drew Davenport <ddavenport@chromium.org>
Closes: https://lore.kernel.org/all/Zb0q8IDVXS0HxJyj@chromium.org
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240205132631.1588577-1-imre.deak@intel.com
(cherry picked from commit a62e145981500996ea76af3d740ce0c0d74c5be0)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Third argument of i915_request_wait() accepts a timeout value in jiffies.
Most users pass either a simple HZ based expression, or a result of
msecs_to_jiffies(), or MAX_SCHEDULE_TIMEOUT, or a very small number not
exceeding 4 if applicable as that value. However, there is one user --
intel_selftest_wait_for_rq() -- that passes a WAIT_FOR_RESET_TIME symbol,
defined as a large constant value that most probably represents a desired
timeout in ms. While that usage results in the intended value of timeout
on usual x86_64 kernel configurations, it is not portable across different
architectures and custom kernel configs.
Rename the symbol to clearly indicate intended units and convert it to
jiffies before use.
Fixes: 3a4bfa091c46 ("drm/i915/selftest: Fix workarounds selftest for GuC submission")
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Cc: Rahul Kumar Singh <rahul.kumar.singh@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240222113347.648945-2-janusz.krzysztofik@linux.intel.com
(cherry picked from commit 6ee3f54b880c91ab2e244eb4ffd4bfed37832b25)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-03-05 (idpf, ice, i40e, igc, e1000e)
This series contains updates to idpf, ice, i40e, igc and e1000e drivers.
Emil disables local BH on NAPI schedule for proper handling of softirqs
on idpf.
Jake stops reporting of virtchannel RSS option which in unsupported on
ice.
Rand Deeb adds null check to prevent possible null pointer dereference
on ice.
Michal Schmidt moves DPLL mutex initialization to resolve uninitialized
mutex usage for ice.
Jesse fixes incorrect variable usage for calculating Tx stats on ice.
Ivan Vecera corrects logic for firmware equals check on i40e.
Florian Kauer prevents memory corruption for XDP_REDIRECT on igc.
Sasha reverts an incorrect use of FIELD_GET which caused a regression
for Wake on LAN on e1000e.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into arm/fixes
RISC-V firmware drivers for v6.9
A single minor fix for an oversized allocation due to sizeof() misuse by
yours truly that came in since I sent my last fixes PR.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-firmware-for-v6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
firmware: microchip: Fix over-requested allocation size
Link: https://lore.kernel.org/r/20240305-vicinity-dumpling-8943ef26f004@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This bug was noticed while re-implementing parts of the kernel
driver in userspace using spidev. The goal was to enable some
of the errata workarounds that Microchip describes in their
errata sheet [1].
Both the errata sheet and the regular datasheet of e.g. the KSZ8795
imply that you need to do this for indirect register accesses:
- write a 16-bit value to a control register pair (this value
consists of the indirect register table, and the offset inside
the table)
- either read or write an 8-bit value from the data storage
register (indicated by REG_IND_BYTE in the kernel)
The current implementation has the order swapped. It can be
proven, by reading back some indirect register with known content
(the EEE register modified in ksz8_handle_global_errata() is one of
these), that this implementation does not work.
Private discussion with Oleksij Rempel of Pengutronix has revealed
that the workaround was apparantly never tested on actual hardware.
[1] https://ww1.microchip.com/downloads/aemDocuments/documents/OTH/ProductDocuments/Errata/KSZ87xx-Errata-DS80000687C.pdf
Signed-off-by: Tobias Jakobi (Compleo) <tobias.jakobi.compleo@gmail.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Fixes: 7b6e6235b664 ("net: dsa: microchip: ksz8795: handle eee specif erratum")
Link: https://lore.kernel.org/r/20240304154135.161332-1-tobias.jakobi.compleo@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Older versions of GCC really want to know the full definition
of the type involved in rcu_assign_pointer().
struct dpll_pin is defined in a local header, net/core can't
reach it. Move all the netdev <> dpll code into dpll, where
the type is known. Otherwise we'd need multiple function calls
to jump between the compilation units.
This is the same problem the commit under fixes was trying to address,
but with rcu_assign_pointer() not rcu_dereference().
Some of the exports are not needed, networking core can't
be a module, we only need exports for the helpers used by
drivers.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/all/35a869c8-52e8-177-1d4d-e57578b99b6@linux-m68k.org/
Fixes: 640f41ed33b5 ("dpll: fix build failure due to rcu_dereference_check() on unknown type")
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240305013532.694866-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 9b0ed890ac2a ("bonding: do not report NETDEV_XDP_ACT_XSK_ZEROCOPY")
changed the driver from reporting everything as supported before a device
was bonded into having the driver report that no XDP feature is supported
until a real device is bonded as it seems to be more truthful given
eventually real underlying devices decide what XDP features are supported.
The change however did not take into account when all slave devices get
removed from the bond device. In this case after 9b0ed890ac2a, the driver
keeps reporting a feature mask of 0x77, that is, NETDEV_XDP_ACT_MASK &
~NETDEV_XDP_ACT_XSK_ZEROCOPY whereas it should have reported a feature
mask of 0.
Fix it by resetting XDP feature flags in the same way as if no XDP program
is attached to the bond device. This was uncovered by the XDP bond selftest
which let BPF CI fail. After adjusting the starting masks on the latter
to 0 instead of NETDEV_XDP_ACT_MASK the test passes again together with
this fix.
Fixes: 9b0ed890ac2a ("bonding: do not report NETDEV_XDP_ACT_XSK_ZEROCOPY")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Magnus Karlsson <magnus.karlsson@intel.com>
Cc: Prashant Batra <prbatra.mail@gmail.com>
Cc: Toke Høiland-Jørgensen <toke@redhat.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Message-ID: <20240305090829.17131-1-daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
- Fix P2SB regression causing ACPI errors and high CPU load
- Fix error return path in amd_pmf_init_smart_pc()
* tag 'platform-drivers-x86-v6.8-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86/amd/pmf: Fix missing error code in amd_pmf_init_smart_pc()
platform/x86: p2sb: On Goldmont only cache P2SB and SPI devfn BAR
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fixes from Wei Liu:
- Multiple fixes, cleanups and documentations for Hyper-V core code and
drivers
* tag 'hyperv-fixes-signed-20240303' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
Drivers: hv: vmbus: make hv_bus const
x86/hyperv: Allow 15-bit APIC IDs for VTL platforms
x86/hyperv: Make encrypted/decrypted changes safe for load_unaligned_zeropad()
x86/mm: Regularize set_memory_p() parameters and make non-static
x86/hyperv: Use slow_virt_to_phys() in page transition hypervisor callback
Documentation: hyperv: Add overview of PCI pass-thru device support
Drivers: hv: vmbus: Update indentation in create_gpadl_header()
Drivers: hv: vmbus: Remove duplication and cleanup code in create_gpadl_header()
fbdev/hyperv_fb: Fix logic error for Gen2 VMs in hvfb_getmem()
Drivers: hv: vmbus: Calculate ring buffer size for more efficient use of memory
hv_utils: Allow implicit ICTIMESYNCFLAG_SYNC
|
|
Refactoring of the field get conversion introduced a regression in the
legacy Wake On Lan from a magic packet with i219 devices. Rx address
copied not correctly from MAC to PHY with FIELD_GET macro.
Fixes: b9a452545075 ("intel: legacy: field get conversion")
Suggested-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
When a frame can not be transmitted in XDP_REDIRECT
(e.g. due to a full queue), it is necessary to free
it by calling xdp_return_frame_rx_napi.
However, this is the responsibility of the caller of
the ndo_xdp_xmit (see for example bq_xmit_all in
kernel/bpf/devmap.c) and thus calling it inside
igc_xdp_xmit (which is the ndo_xdp_xmit of the igc
driver) as well will lead to memory corruption.
In fact, bq_xmit_all expects that it can return all
frames after the last successfully transmitted one.
Therefore, break for the first not transmitted frame,
but do not call xdp_return_frame_rx_napi in igc_xdp_xmit.
This is equally implemented in other Intel drivers
such as the igb.
There are two alternatives to this that were rejected:
1. Return num_frames as all the frames would have been
transmitted and release them inside igc_xdp_xmit.
While it might work technically, it is not what
the return value is meant to represent (i.e. the
number of SUCCESSFULLY transmitted packets).
2. Rework kernel/bpf/devmap.c and all drivers to
support non-consecutively dropped packets.
Besides being complex, it likely has a negative
performance impact without a significant gain
since it is anyway unlikely that the next frame
can be transmitted if the previous one was dropped.
The memory corruption can be reproduced with
the following script which leads to a kernel panic
after a few seconds. It basically generates more
traffic than a i225 NIC can transmit and pushes it
via XDP_REDIRECT from a virtual interface to the
physical interface where frames get dropped.
#!/bin/bash
INTERFACE=enp4s0
INTERFACE_IDX=`cat /sys/class/net/$INTERFACE/ifindex`
sudo ip link add dev veth1 type veth peer name veth2
sudo ip link set up $INTERFACE
sudo ip link set up veth1
sudo ip link set up veth2
cat << EOF > redirect.bpf.c
SEC("prog")
int redirect(struct xdp_md *ctx)
{
return bpf_redirect($INTERFACE_IDX, 0);
}
char _license[] SEC("license") = "GPL";
EOF
clang -O2 -g -Wall -target bpf -c redirect.bpf.c -o redirect.bpf.o
sudo ip link set veth2 xdp obj redirect.bpf.o
cat << EOF > pass.bpf.c
SEC("prog")
int pass(struct xdp_md *ctx)
{
return XDP_PASS;
}
char _license[] SEC("license") = "GPL";
EOF
clang -O2 -g -Wall -target bpf -c pass.bpf.c -o pass.bpf.o
sudo ip link set $INTERFACE xdp obj pass.bpf.o
cat << EOF > trafgen.cfg
{
/* Ethernet Header */
0xe8, 0x6a, 0x64, 0x41, 0xbf, 0x46,
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
const16(ETH_P_IP),
/* IPv4 Header */
0b01000101, 0, # IPv4 version, IHL, TOS
const16(1028), # IPv4 total length (UDP length + 20 bytes (IP header))
const16(2), # IPv4 ident
0b01000000, 0, # IPv4 flags, fragmentation off
64, # IPv4 TTL
17, # Protocol UDP
csumip(14, 33), # IPv4 checksum
/* UDP Header */
10, 0, 1, 1, # IP Src - adapt as needed
10, 0, 1, 2, # IP Dest - adapt as needed
const16(6666), # UDP Src Port
const16(6666), # UDP Dest Port
const16(1008), # UDP length (UDP header 8 bytes + payload length)
csumudp(14, 34), # UDP checksum
/* Payload */
fill('W', 1000),
}
EOF
sudo trafgen -i trafgen.cfg -b3000MB -o veth1 --cpp
Fixes: 4ff320361092 ("igc: Add support for XDP_REDIRECT action")
Signed-off-by: Florian Kauer <florian.kauer@linutronix.de>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Helper i40e_is_fw_ver_eq() compares incorrectly given firmware version
as it returns true when the major version of running firmware is
greater than the given major version that is wrong and results in
failure during getting of DCB configuration where this helper is used.
Fix the check and return true only if the running FW version is exactly
equals to the given version.
Reproducer:
1. Load i40e driver
2. Check dmesg output
[root@host ~]# modprobe i40e
[root@host ~]# dmesg | grep 'i40e.*DCB'
[ 74.750642] i40e 0000:02:00.0: Query for DCB configuration failed, err -EIO aq_err I40E_AQ_RC_EINVAL
[ 74.759770] i40e 0000:02:00.0: DCB init failed -5, disabled
[ 74.966550] i40e 0000:02:00.1: Query for DCB configuration failed, err -EIO aq_err I40E_AQ_RC_EINVAL
[ 74.975683] i40e 0000:02:00.1: DCB init failed -5, disabled
Fixes: cf488e13221f ("i40e: Add other helpers to check version of running firmware and AQ API")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Fix an obviously incorrect assignment, created with a typo or cut-n-paste
error.
Fixes: 5995ef88e3a8 ("ice: realloc VSI stats arrays")
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
Linus Torvalds
Tommy Huang
Christophe JAILLET
Heiner Kallweit
Dave Airlie
Mathias Krause
Yongzhi Liu
Matthew Auld
Rodrigo Vivi
Jakub Kicinski
Ma Jun
Alex Deucher
Melissa Wen
Li Ma
Charles Keepax
Douglas Anderson
Johan Hovold
Animesh Manna
Edmund Raile
Imre Deak
Janusz Krzysztofik
David S. Miller
Arnd Bergmann
Tobias Jakobi (Compleo)
Daniel Borkmann
Sasha Neftin
Florian Kauer
Ivan Vecera
Jesse Brandeburg