| Age | Commit message (Collapse) | Author |
|---|
|
commit 7aedf75ff740a98f3683439449cd91c8662d03b2 upstream.
The function blkdev_report_zones() returns success even if no zone
information is reported (empty report). Empty zone reports can only
happen if the report start sector passed exceeds the device capacity.
The conditions for this to happen are either a bug in the caller code,
or, a change in the device that forced the low level driver to change
the device capacity to a value that is lower than the report start
sector. This situation includes a failed disk revalidation resulting in
the disk capacity being changed to 0.
If this change happens while dm-zoned is in its initialization phase
executing dmz_init_zones(), this function may enter an infinite loop
and hang the system. To avoid this, add a check to disallow empty zone
reports and bail out early. Also fix the function dmz_update_zone() to
make sure that the report for the requested zone was correctly obtained.
Fixes: 3b1a94c88b79 ("dm zoned: drive-managed zoned block device target")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Shaun Tancheff <shaun@tancheff.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e28adc3bf34e434b30e8d063df4823ba0f3e0529 upstream.
Add missing dm_bitset_cursor_next() to properly advance the bitset
cursor.
Otherwise, the discarded state of all blocks is set according to the
discarded state of the first block.
Fixes: ae4a46a1f6 ("dm cache metadata: use bitset cursor api to load discard bitset")
Cc: stable@vger.kernel.org
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4ec73791a64bab25cabf16a6067ee478692e506d upstream.
Due to an erratum in some Pericom PCIe-to-PCI bridges in reverse mode
(conventional PCI on primary side, PCIe on downstream side), the Retrain
Link bit needs to be cleared manually to allow the link training to
complete successfully.
If it is not cleared manually, the link training is continuously restarted
and no devices below the PCI-to-PCIe bridge can be accessed. That means
drivers for devices below the bridge will be loaded but won't work and may
even crash because the driver is only reading 0xffff.
See the Pericom Errata Sheet PI7C9X111SLB_errata_rev1.2_102711.pdf for
details. Devices known as affected so far are: PI7C9X110, PI7C9X111SL,
PI7C9X130.
Add a new flag, clear_retrain_link, in struct pci_dev. Quirks for affected
devices set this bit.
Note that pcie_retrain_link() lives in aspm.c because that's currently the
only place we use it, but this erratum is not specific to ASPM, and we may
retrain links for other reasons in the future.
Signed-off-by: Stefan Mätje <stefan.maetje@esd.eu>
[bhelgaas: apply regardless of CONFIG_PCIEASPM]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
CC: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 86fa6a344209d9414ea962b1f1ac6ade9dd7563a upstream.
Factor out pcie_retrain_link() to use for Pericom Retrain Link quirk. No
functional change intended.
Signed-off-by: Stefan Mätje <stefan.maetje@esd.eu>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
CC: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit be20bbcb0a8cb5597cc62b3e28d275919f3431df upstream.
Reestablish the PCIe link very early in the resume process in case it
went down to prevent PCI accesses from hanging the bus. Such accesses
can happen early in the PCI resume process, as early as the
SUSPEND_RESUME_NOIRQ step, thus the link must be reestablished in the
driver resume_noirq() callback.
Fixes: e015f88c368d ("PCI: rcar: Add support for R-Car H3 to pcie-rcar")
Signed-off-by: Kazufumi Ikeda <kaz-ikeda@xc.jp.nec.com>
Signed-off-by: Gaku Inami <gaku.inami.xw@bp.renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
[lorenzo.pieralisi@arm.com: reformatted commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Cc: stable@vger.kernel.org
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Phil Edworthy <phil.edworthy@renesas.com>
Cc: Simon Horman <horms+renesas@verge.net.au>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: linux-renesas-soc@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 31f996efbd5a7825f4d30150469e9d110aea00e8 upstream.
Commit 60ed982a4e78 ("PCI/AER: Move internal declarations to
drivers/pci/pci.h") changed pci_aer_init() to return "void", but didn't
change the stub for when CONFIG_PCIEAER isn't enabled. Change the stub to
match.
Fixes: 60ed982a4e78 ("PCI/AER: Move internal declarations to drivers/pci/pci.h")
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: stable@vger.kernel.org # v4.19+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6302bf3ef78dd210b5ff4a922afcb7d8eff8a211 upstream.
Two functions allocate a host bridge: devm_pci_alloc_host_bridge() and
pci_alloc_host_bridge(). At the moment, only the unmanaged one initializes
the PCIe feature bits, which prevents from using features such as hotplug
or AER on some systems, when booting with device tree. Make the
initialization code common.
Fixes: 02bfeb484230 ("PCI/portdrv: Simplify PCIe feature permission checking")
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: stable@vger.kernel.org # v4.17+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e0547c81bfcfad01cbbfa93a5e66bb98ab932f80 upstream.
On ThinkPad P50 SKUs with an Nvidia Quadro M1000M instead of the M2000M
variant, the BIOS does not always reset the secondary Nvidia GPU during
reboot if the laptop is configured in Hybrid Graphics mode. The reason is
unknown, but the following steps and possibly a good bit of patience will
reproduce the issue:
1. Boot up the laptop normally in Hybrid Graphics mode
2. Make sure nouveau is loaded and that the GPU is awake
3. Allow the Nvidia GPU to runtime suspend itself after being idle
4. Reboot the machine, the more sudden the better (e.g. sysrq-b may help)
5. If nouveau loads up properly, reboot the machine again and go back to
step 2 until you reproduce the issue
This results in some very strange behavior: the GPU will be left in exactly
the same state it was in when the previously booted kernel started the
reboot. This has all sorts of bad side effects: for starters, this
completely breaks nouveau starting with a mysterious EVO channel failure
that happens well before we've actually used the EVO channel for anything:
nouveau 0000:01:00.0: disp: chid 0 mthd 0000 data 00000400 00001000 00000002
This causes a timeout trying to bring up the GR ctx:
nouveau 0000:01:00.0: timeout
WARNING: CPU: 0 PID: 12 at drivers/gpu/drm/nouveau/nvkm/engine/gr/ctxgf100.c:1547 gf100_grctx_generate+0x7b2/0x850 [nouveau]
Hardware name: LENOVO 20EQS64N0B/20EQS64N0B, BIOS N1EET82W (1.55 ) 12/18/2018
Workqueue: events_long drm_dp_mst_link_probe_work [drm_kms_helper]
...
nouveau 0000:01:00.0: gr: wait for idle timeout (en: 1, ctxsw: 0, busy: 1)
nouveau 0000:01:00.0: gr: wait for idle timeout (en: 1, ctxsw: 0, busy: 1)
nouveau 0000:01:00.0: fifo: fault 01 [WRITE] at 0000000000008000 engine 00 [GR] client 15 [HUB/SCC_NB] reason c4 [] on channel -1 [0000000000 unknown]
The GPU never manages to recover. Booting without loading nouveau causes
issues as well, since the GPU starts sending spurious interrupts that cause
other device's IRQs to get disabled by the kernel:
irq 16: nobody cared (try booting with the "irqpoll" option)
...
handlers:
[<000000007faa9e99>] i801_isr [i2c_i801]
Disabling IRQ #16
...
serio: RMI4 PS/2 pass-through port at rmi4-00.fn03
i801_smbus 0000:00:1f.4: Timeout waiting for interrupt!
i801_smbus 0000:00:1f.4: Transaction timeout
rmi4_f03 rmi4-00.fn03: rmi_f03_pt_write: Failed to write to F03 TX register (-110).
i801_smbus 0000:00:1f.4: Timeout waiting for interrupt!
i801_smbus 0000:00:1f.4: Transaction timeout
rmi4_physical rmi4-00: rmi_driver_set_irq_bits: Failed to change enabled interrupts!
This causes the touchpad and sometimes other things to get disabled.
Since this happens without nouveau, we can't fix this problem from nouveau
itself.
Add a PCI quirk for the specific P50 variant of this GPU. Make sure the
GPU is advertising NoReset- so we don't reset the GPU when the machine is
in Dedicated graphics mode (where the GPU being initialized by the BIOS is
normal and expected). Map the GPU MMIO space and read the magic 0x2240c
register, which will have bit 1 set if the device was POSTed during a
previous boot. Once we've confirmed all of this, reset the GPU and
re-disable it - bringing it back to a healthy state.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=203003
Link: https://lore.kernel.org/lkml/20190212220230.1568-1-lyude@redhat.com
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: nouveau@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Cc: Karol Herbst <kherbst@redhat.com>
Cc: Ben Skeggs <skeggsb@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6afb7e26978da5e86e57e540fdce65c8b04f398a upstream.
When using PCI passthrough with this device, the host machine locks up
completely when starting the VM, requiring a hard reboot. Add a quirk to
avoid bus resets on this device.
Fixes: c3e59ee4e766 ("PCI: Mark Atheros AR93xx to avoid bus reset")
Link: https://lore.kernel.org/linux-pci/20190107213248.3034-1-james.prestwood@linux.intel.com
Signed-off-by: James Prestwood <james.prestwood@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: stable@vger.kernel.org # v3.14+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d28ca864c493637f3c957f4ed9348a94fca6de60 upstream.
ATS is broken on the Radeon R7 GPU (at least for Stoney Ridge based laptop)
and causes IOMMU stalls and system failure. Disable ATS on these devices
to make them usable again with IOMMU enabled.
Thanks to Joerg Roedel <jroedel@suse.de> for help.
[bhelgaas: In the email thread mentioned below, Alex suspects the real
problem is in sbios or iommu, so it may affect only certain systems, and it
may affect other devices in those systems as well. However, per Joerg we
lack the ability to debug further, so this quirk is the best we can do for
now.]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=194521
Link: https://lore.kernel.org/lkml/20190408103725.30426-1-nickel@altlinux.org
Fixes: 9b44b0b09dec ("PCI: Mark AMD Stoney GPU ATS as broken")
Signed-off-by: Nikolai Kostrigin <nickel@altlinux.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Joerg Roedel <jroedel@suse.de>
CC: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f627caf55b8e735dcec8fa6538e9668632b55276 upstream.
On a Thinkpad s30 (Pentium III / i440MX, Lynx3DM), blanking the display
or starting the X server will crash and freeze the system, or garble the
display.
Experiments showed this problem can mostly be solved by adjusting the
order of register writes. Also, sm712fb failed to consider the difference
of clock frequency when unblanking the display, and programs the clock for
SM712 to SM720.
Fix them by adjusting the order of register writes, and adding an
additional check for SM720 for programming the clock frequency.
Signed-off-by: Yifeng Li <tomli@tomli.me>
Tested-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Teddy Wang <teddy.wang@siliconmotion.com>
Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4ed7d2ccb7684510ec5f7a8f7ef534bc6a3d55b2 upstream.
Loongson MIPS netbooks use 1024x600 LCD panels, which is the original
target platform of this driver, but nearly all old x86 laptops have
1024x768. Lighting 768 panels using 600's timings would partially
garble the display. Since it's not possible to distinguish them reliably,
we change the default to 768, but keep 600 as-is on MIPS.
Further, earlier laptops, such as IBM Thinkpad 240X, has a 800x600 LCD
panel, this driver would probably garbled those display. As we don't
have one for testing, the original behavior of the driver is kept as-is,
but the problem has been documented is the comments.
Signed-off-by: Yifeng Li <tomli@tomli.me>
Tested-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Teddy Wang <teddy.wang@siliconmotion.com>
Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6053d3a4793e5bde6299ac5388e76a3bf679ff65 upstream.
In order to support the 1024x600 panel on Yeeloong Loongson MIPS
laptop, the original 1024x768-16 table was modified to 1024x600-16,
without leaving the original. It causes problem on x86 laptop as
the 1024x768-16 support was still claimed but not working.
Fix it by introducing the 1024x768-16 mode.
Signed-off-by: Yifeng Li <tomli@tomli.me>
Tested-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Teddy Wang <teddy.wang@siliconmotion.com>
Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9e0e59993df0601cddb95c4f6c61aa3d5e753c00 upstream.
On a Thinkpad s30 (Pentium III / i440MX, Lynx3DM), running fbtest or X
will crash the machine instantly, because the VRAM/framebuffer is not
mapped correctly.
On SM712, the framebuffer starts at the beginning of address space, but
SM720's framebuffer starts at the 1 MiB offset from the beginning. However,
sm712fb fails to take this into account, as a result, writing to the
framebuffer will destroy all the registers and kill the system immediately.
Another problem is the driver assumes 8 MiB of VRAM for SM720, but some
SM720 system, such as this IBM Thinkpad, only has 4 MiB of VRAM.
Fix this problem by removing the hardcoded VRAM size, adding a function to
query the amount of VRAM from register MCR76 on SM720, and adding proper
framebuffer offset.
Please note that the memory map may have additional problems on Big-Endian
system, which is not available for testing by myself. But I highly suspect
that the original code is also broken on Big-Endian machines for SM720, so
at least we are not making the problem worse. More, the driver also assumed
SM710/SM712 has 4 MiB of VRAM, but it has a 2 MiB version as well, and used
in earlier laptops, such as IBM Thinkpad 240X, the driver would probably
crash on them. I've never seen one of those machines and cannot fix it, but
I have documented these problems in the comments.
Signed-off-by: Yifeng Li <tomli@tomli.me>
Tested-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Teddy Wang <teddy.wang@siliconmotion.com>
Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ec1587d5073f29820e358f3a383850d61601d981 upstream.
When the machine is booted in VGA mode, loading sm712fb would cause
a glitch of random pixels shown on the screen. To prevent it from
happening, we first clear the entire framebuffer, and we also need
to stop calling smtcfb_setmode() during initialization, the fbdev
layer will call it for us later when it's ready.
Signed-off-by: Yifeng Li <tomli@tomli.me>
Tested-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Teddy Wang <teddy.wang@siliconmotion.com>
Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8069053880e0ee3a75fd6d7e0a30293265fe3de4 upstream.
On a Thinkpad s30 (Pentium III / i440MX, Lynx3DM), rebooting with
sm712fb framebuffer driver would cause a white screen of death on
the next POST, presumably the proper timings for the LCD panel was
not reprogrammed properly by the BIOS.
Experiments showed a few CRTC Scratch Registers, including CRT3D,
CRT3E and CRT3F may be used internally by BIOS as some flags. CRT3B is
a hardware testing register, we shouldn't mess with it. CRT3C has
blanking signal and line compare control, which is not needed for this
driver.
Stop writing to CR3B-CR3F (a.k.a CRT3B-CRT3F) registers. Even if these
registers don't have side-effect on other systems, writing to them is
also highly questionable.
Signed-off-by: Yifeng Li <tomli@tomli.me>
Tested-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Teddy Wang <teddy.wang@siliconmotion.com>
Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit dcf9070595e100942c539e229dde4770aaeaa4e9 upstream.
On a Thinkpad s30 (Pentium III / i440MX, Lynx3DM), the amount of Video
RAM is not detected correctly by the xf86-video-siliconmotion driver.
This is because sm712fb overwrites the GPR71 Scratch Pad Register, which
is set by BIOS on x86 and used to indicate amount of VRAM.
Other Scratch Pad Registers, including GPR70/74/75, don't have the same
side-effect, but overwriting to them is still questionable, as they are
not related to modesetting.
Stop writing to SR70/71/74/75 (a.k.a GPR70/71/74/75).
Signed-off-by: Yifeng Li <tomli@tomli.me>
Tested-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Teddy Wang <teddy.wang@siliconmotion.com>
Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5481115e25e42b9215f2619452aa99c95f08492f upstream.
On a Thinkpad s30 (Pentium III / i440MX, Lynx3DM), rebooting with
sm712fb framebuffer driver would cause the role of brightness up/down
button to swap.
Experiments showed the FPR30 register caused this behavior. Moreover,
even if this register don't have side-effect on other systems, over-
writing it is also highly questionable, since it was originally
configurated by the motherboard manufacturer by hardwiring pull-down
resistors to indicate the type of LCD panel. We should not mess with
it.
Stop writing to the SR30 (a.k.a FPR30) register.
Signed-off-by: Yifeng Li <tomli@tomli.me>
Tested-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Teddy Wang <teddy.wang@siliconmotion.com>
Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f8585539df0a1527c78b5d760665c89fe1c105a9 upstream.
The following commit:
38ac0287b7f4 ("fbdev/efifb: Honour UEFI memory map attributes when mapping the FB")
updated the EFI framebuffer code to use memory mappings for the linear
framebuffer that are permitted by the memory attributes described by the
EFI memory map for the particular region, if the framebuffer happens to
be covered by the EFI memory map (which is typically only the case for
framebuffers in shared memory). This is required since non-x86 systems
may require cacheable attributes for memory mappings that are shared
with other masters (such as GPUs), and this information cannot be
described by the Graphics Output Protocol (GOP) EFI protocol itself,
and so we rely on the EFI memory map for this.
As reported by James, this breaks some x86 systems:
[ 1.173368] efifb: probing for efifb
[ 1.173386] efifb: abort, cannot remap video memory 0x1d5000 @ 0xcf800000
[ 1.173395] Trying to free nonexistent resource <00000000cf800000-00000000cf9d4bff>
[ 1.173413] efi-framebuffer: probe of efi-framebuffer.0 failed with error -5
The problem turns out to be that the memory map entry that describes the
framebuffer has no memory attributes listed at all, and so we end up with
a mem_flags value of 0x0.
So work around this by ensuring that the memory map entry's attribute field
has a sane value before using it to mask the set of usable attributes.
Reported-by: James Hilliard <james.hilliard1@gmail.com>
Tested-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: <stable@vger.kernel.org> # v4.19+
Cc: Borislav Petkov <bp@alien8.de>
Cc: James Morse <james.morse@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Jones <pjones@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Fixes: 38ac0287b7f4 ("fbdev/efifb: Honour UEFI memory map attributes when ...")
Link: http://lkml.kernel.org/r/20190516213159.3530-2-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5a28fc94c9143db766d1ba5480cae82d856ad080 upstream.
This is a bit of a mess, to put it mildly. But, it's a bug
that only seems to have showed up in 4.20 but wasn't noticed
until now, because nobody uses MPX.
MPX has the arch_unmap() hook inside of munmap() because MPX
uses bounds tables that protect other areas of memory. When
memory is unmapped, there is also a need to unmap the MPX
bounds tables. Barring this, unused bounds tables can eat 80%
of the address space.
But, the recursive do_munmap() that gets called vi arch_unmap()
wreaks havoc with __do_munmap()'s state. It can result in
freeing populated page tables, accessing bogus VMA state,
double-freed VMAs and more.
See the "long story" further below for the gory details.
To fix this, call arch_unmap() before __do_unmap() has a chance
to do anything meaningful. Also, remove the 'vma' argument
and force the MPX code to do its own, independent VMA lookup.
== UML / unicore32 impact ==
Remove unused 'vma' argument to arch_unmap(). No functional
change.
I compile tested this on UML but not unicore32.
== powerpc impact ==
powerpc uses arch_unmap() well to watch for munmap() on the
VDSO and zeroes out 'current->mm->context.vdso_base'. Moving
arch_unmap() makes this happen earlier in __do_munmap(). But,
'vdso_base' seems to only be used in perf and in the signal
delivery that happens near the return to userspace. I can not
find any likely impact to powerpc, other than the zeroing
happening a little earlier.
powerpc does not use the 'vma' argument and is unaffected by
its removal.
I compile-tested a 64-bit powerpc defconfig.
== x86 impact ==
For the common success case this is functionally identical to
what was there before. For the munmap() failure case, it's
possible that some MPX tables will be zapped for memory that
continues to be in use. But, this is an extraordinarily
unlikely scenario and the harm would be that MPX provides no
protection since the bounds table got reset (zeroed).
I can't imagine anyone doing this:
ptr = mmap();
// use ptr
ret = munmap(ptr);
if (ret)
// oh, there was an error, I'll
// keep using ptr.
Because if you're doing munmap(), you are *done* with the
memory. There's probably no good data in there _anyway_.
This passes the original reproducer from Richard Biener as
well as the existing mpx selftests/.
The long story:
munmap() has a couple of pieces:
1. Find the affected VMA(s)
2. Split the start/end one(s) if neceesary
3. Pull the VMAs out of the rbtree
4. Actually zap the memory via unmap_region(), including
freeing page tables (or queueing them to be freed).
5. Fix up some of the accounting (like fput()) and actually
free the VMA itself.
This specific ordering was actually introduced by:
dd2283f2605e ("mm: mmap: zap pages with read mmap_sem in munmap")
during the 4.20 merge window. The previous __do_munmap() code
was actually safe because the only thing after arch_unmap() was
remove_vma_list(). arch_unmap() could not see 'vma' in the
rbtree because it was detached, so it is not even capable of
doing operations unsafe for remove_vma_list()'s use of 'vma'.
Richard Biener reported a test that shows this in dmesg:
[1216548.787498] BUG: Bad rss-counter state mm:0000000017ce560b idx:1 val:551
[1216548.787500] BUG: non-zero pgtables_bytes on freeing mm: 24576
What triggered this was the recursive do_munmap() called via
arch_unmap(). It was freeing page tables that has not been
properly zapped.
But, the problem was bigger than this. For one, arch_unmap()
can free VMAs. But, the calling __do_munmap() has variables
that *point* to VMAs and obviously can't handle them just
getting freed while the pointer is still in use.
I tried a couple of things here. First, I tried to fix the page
table freeing problem in isolation, but I then found the VMA
issue. I also tried having the MPX code return a flag if it
modified the rbtree which would force __do_munmap() to re-walk
to restart. That spiralled out of control in complexity pretty
fast.
Just moving arch_unmap() and accepting that the bonkers failure
case might eat some bounds tables seems like the simplest viable
fix.
This was also reported in the following kernel bugzilla entry:
https://bugzilla.kernel.org/show_bug.cgi?id=203123
There are some reports that this commit triggered this bug:
dd2283f2605 ("mm: mmap: zap pages with read mmap_sem in munmap")
While that commit certainly made the issues easier to hit, I believe
the fundamental issue has been with us as long as MPX itself, thus
the Fixes: tag below is for one of the original MPX commits.
[ mingo: Minor edits to the changelog and the patch. ]
Reported-by: Richard Biener <rguenther@suse.de>
Reported-by: H.J. Lu <hjl.tools@gmail.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Yang Shi <yang.shi@linux.alibaba.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rik van Riel <riel@surriel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: linux-arch@vger.kernel.org
Cc: linux-mm@kvack.org
Cc: linux-um@lists.infradead.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: stable@vger.kernel.org
Fixes: dd2283f2605e ("mm: mmap: zap pages with read mmap_sem in munmap")
Link: http://lkml.kernel.org/r/20190419194747.5E1AD6DC@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8ea58f1e8b11cca3087b294779bf5959bf89cc10 upstream.
Currently, this Makefile hardcodes GNU ar, meaning that if it is not
available, there is no way to supply a different one and the build will
fail.
$ make AR=llvm-ar CC=clang LD=ld.lld HOSTAR=llvm-ar HOSTCC=clang \
HOSTLD=ld.lld HOSTLDFLAGS=-fuse-ld=lld defconfig modules_prepare
...
AR /out/tools/objtool/libsubcmd.a
/bin/sh: 1: ar: not found
...
Follow the logic of HOST{CC,LD} and allow the user to specify a
different ar tool via HOSTAR (which is used elsewhere in other
tools/ Makefiles).
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Cc: <stable@vger.kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/80822a9353926c38fd7a152991c6292491a9d0e8.1558028966.git.jpoimboe@redhat.com
Link: https://github.com/ClangBuiltLinux/linux/issues/481
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1b1f01b653b408ebe58fec78c566d1075d285c64 upstream.
arch/mips/kernel/perf_event_mipsxx.c: In function 'mipsxx_pmu_enable_event':
arch/mips/kernel/perf_event_mipsxx.c:326:21: error: unused variable 'event' [-Werror=unused-variable]
struct perf_event *event = container_of(evt, struct perf_event, hw);
^~~~~
Fix this by making use of IS_ENABLED() to simplify the code and avoid
unnecessary ifdefery.
Fixes: 84002c88599d ("MIPS: perf: Fix perf with MT counting other threads")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@linux-mips.org
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@vger.kernel.org
Cc: stable@vger.kernel.org # v4.18+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1b6599a9d8e6c9f7e9b0476012383b1777f7fc93 upstream.
The sample timestamp is updated to ensure that the timestamp represents
the time of the sample and not a branch that the decoder is still
walking towards. The sample timestamp is updated when the decoder
returns, but the decoder does not return for non-taken branches. Update
the sample timestamp then also.
Note that commit 3f04d98e972b5 ("perf intel-pt: Improve sample
timestamp") was also a stable fix and appears, for example, in v4.4
stable tree as commit a4ebb58fd124 ("perf intel-pt: Improve sample
timestamp").
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org # v4.4+
Fixes: 3f04d98e972b ("perf intel-pt: Improve sample timestamp")
Link: http://lkml.kernel.org/r/20190510124143.27054-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 61b6e08dc8e3ea80b7485c9b3f875ddd45c8466b upstream.
The decoder uses its current timestamp in samples. Usually that is a
timestamp that has already passed, but in some cases it is a timestamp
for a branch that the decoder is walking towards, and consequently
hasn't reached.
The intel_pt_sample_time() function decides which is which, but was not
handling TNT packets exactly correctly.
In the case of TNT, the timestamp applies to the first branch, so the
decoder must first walk to that branch.
That means intel_pt_sample_time() should return true for TNT, and this
patch makes that change. However, if the first branch is a non-taken
branch (i.e. a 'N'), then intel_pt_sample_time() needs to return false
for subsequent taken branches in the same TNT packet.
To handle that, introduce a new state INTEL_PT_STATE_TNT_CONT to
distinguish the cases.
Note that commit 3f04d98e972b5 ("perf intel-pt: Improve sample
timestamp") was also a stable fix and appears, for example, in v4.4
stable tree as commit a4ebb58fd124 ("perf intel-pt: Improve sample
timestamp").
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org # v4.4+
Fixes: 3f04d98e972b5 ("perf intel-pt: Improve sample timestamp")
Link: http://lkml.kernel.org/r/20190510124143.27054-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7ba8fa20e26eb3c0c04d747f7fd2223694eac4d5 upstream.
The timestamp used to determine if an instruction sample is made, is an
estimate based on the number of instructions since the last known
timestamp. A consequence is that it might go backwards, which results in
extra samples. Change it so that a sample is only made when the
timestamp goes forwards.
Note this does not affect a sampling period of 0 or sampling periods
specified as a count of instructions.
Example:
Before:
$ perf script --itrace=i10us
ls 13812 [003] 2167315.222583: 3270 instructions:u: 7fac71e2e494 __GI___tunables_init+0xf4 (/lib/x86_64-linux-gnu/ld-2.28.so)
ls 13812 [003] 2167315.222667: 30902 instructions:u: 7fac71e2da0f _dl_cache_libcmp+0x2f (/lib/x86_64-linux-gnu/ld-2.28.so)
ls 13812 [003] 2167315.222667: 10 instructions:u: 7fac71e2d9ff _dl_cache_libcmp+0x1f (/lib/x86_64-linux-gnu/ld-2.28.so)
ls 13812 [003] 2167315.222667: 8 instructions:u: 7fac71e2d9ea _dl_cache_libcmp+0xa (/lib/x86_64-linux-gnu/ld-2.28.so)
ls 13812 [003] 2167315.222667: 14 instructions:u: 7fac71e2d9ea _dl_cache_libcmp+0xa (/lib/x86_64-linux-gnu/ld-2.28.so)
ls 13812 [003] 2167315.222667: 6 instructions:u: 7fac71e2d9ff _dl_cache_libcmp+0x1f (/lib/x86_64-linux-gnu/ld-2.28.so)
ls 13812 [003] 2167315.222667: 14 instructions:u: 7fac71e2d9ff _dl_cache_libcmp+0x1f (/lib/x86_64-linux-gnu/ld-2.28.so)
ls 13812 [003] 2167315.222667: 4 instructions:u: 7fac71e2dab2 _dl_cache_libcmp+0xd2 (/lib/x86_64-linux-gnu/ld-2.28.so)
ls 13812 [003] 2167315.222728: 16423 instructions:u: 7fac71e2477a _dl_map_object_deps+0x1ba (/lib/x86_64-linux-gnu/ld-2.28.so)
ls 13812 [003] 2167315.222734: 12731 instructions:u: 7fac71e27938 _dl_name_match_p+0x68 (/lib/x86_64-linux-gnu/ld-2.28.so)
...
After:
$ perf script --itrace=i10us
ls 13812 [003] 2167315.222583: 3270 instructions:u: 7fac71e2e494 __GI___tunables_init+0xf4 (/lib/x86_64-linux-gnu/ld-2.28.so)
ls 13812 [003] 2167315.222667: 30902 instructions:u: 7fac71e2da0f _dl_cache_libcmp+0x2f (/lib/x86_64-linux-gnu/ld-2.28.so)
ls 13812 [003] 2167315.222728: 16479 instructions:u: 7fac71e2477a _dl_map_object_deps+0x1ba (/lib/x86_64-linux-gnu/ld-2.28.so)
...
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Fixes: f4aa081949e7b ("perf tools: Add Intel PT decoder")
Link: http://lkml.kernel.org/r/20190510124143.27054-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b906c056b6023c390f18347169071193fda57dde upstream.
Multiplying the Memory Controller clock rate by the tick count results
in an integer overflow and in result the truncated tick value is being
programmed into hardware, such that the GR3D memory client performance is
reduced by two times.
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3dd1f7f24f8ceec00bbbc364c2ac3c893f0fdc4c upstream.
Fix to make the type of $comm "string". If we set the other type to $comm
argument, it shows meaningless value or wrong data. Currently probe events
allow us to set string array type (e.g. ":string[2]"), or other digit types
like x8 on $comm. But since clearly $comm is just a string data, it should
not be fetched by other types including array.
Link: http://lkml.kernel.org/r/155723736241.9149.14582064184468574539.stgit@devnote2
Cc: Andreas Ziegler <andreas.ziegler@fau.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 533059281ee5 ("tracing: probeevent: Introduce new argument fetching code")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit cbe08bcbbe787315c425dde284dcb715cfbf3f39 upstream.
When reading only part of the id file, the ppos isn't tracked correctly.
This is taken care by simple_read_from_buffer.
Reading a single byte, and then the next byte would result EOF.
While this seems like not a big deal, this breaks abstractions that
reads information from files unbuffered. See for example
https://github.com/golang/go/issues/29399
This code was mentioned as problematic in
commit cd458ba9d5a5
("tracing: Do not (ab)use trace_seq in event_id_read()")
An example C code that show this bug is:
#include <stdio.h>
#include <stdint.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <unistd.h>
int main(int argc, char **argv) {
if (argc < 2)
return 1;
int fd = open(argv[1], O_RDONLY);
char c;
read(fd, &c, 1);
printf("First %c\n", c);
read(fd, &c, 1);
printf("Second %c\n", c);
}
Then run with, e.g.
sudo ./a.out /sys/kernel/debug/tracing/events/tcp/tcp_set_state/id
You'll notice you're getting the first character twice, instead of the
first two characters in the id file.
Link: http://lkml.kernel.org/r/20181231115837.4932-1-elazar@lightbitslabs.com
Cc: Orit Wasserman <orit.was@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 23725aeeab10b ("ftrace: provide an id file for each event")
Signed-off-by: Elazar Leibovich <elazar@lightbitslabs.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9e298e8604088a600d8100a111a532a9d342af09 upstream.
Nicolai Stange discovered[1] that if live kernel patching is enabled, and the
function tracer started tracing the same function that was patched, the
conversion of the fentry call site during the translation of going from
calling the live kernel patch trampoline to the iterator trampoline, would
have as slight window where it didn't call anything.
As live kernel patching depends on ftrace to always call its code (to
prevent the function being traced from being called, as it will redirect
it). This small window would allow the old buggy function to be called, and
this can cause undesirable results.
Nicolai submitted new patches[2] but these were controversial. As this is
similar to the static call emulation issues that came up a while ago[3].
But after some debate[4][5] adding a gap in the stack when entering the
breakpoint handler allows for pushing the return address onto the stack to
easily emulate a call.
[1] http://lkml.kernel.org/r/20180726104029.7736-1-nstange@suse.de
[2] http://lkml.kernel.org/r/20190427100639.15074-1-nstange@suse.de
[3] http://lkml.kernel.org/r/3cf04e113d71c9f8e4be95fb84a510f085aa4afa.1541711457.git.jpoimboe@redhat.com
[4] http://lkml.kernel.org/r/CAHk-=wh5OpheSU8Em_Q3Hg8qw_JtoijxOdPtHru6d+5K8TWM=A@mail.gmail.com
[5] http://lkml.kernel.org/r/CAHk-=wjvQxY4DvPrJ6haPgAa6b906h=MwZXO6G8OtiTGe=N7_w@mail.gmail.com
[
Live kernel patching is not implemented on x86_32, thus the emulate
calls are only for x86_64.
]
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Nicolai Stange <nstange@suse.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: the arch/x86 maintainers <x86@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Joe Lawrence <joe.lawrence@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Mimi Zohar <zohar@linux.ibm.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nayna Jain <nayna@linux.ibm.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: "open list:KERNEL SELFTEST FRAMEWORK" <linux-kselftest@vger.kernel.org>
Cc: stable@vger.kernel.org
Fixes: b700e7f03df5 ("livepatch: kernel: add support for live patching")
Tested-by: Nicolai Stange <nstange@suse.de>
Reviewed-by: Nicolai Stange <nstange@suse.de>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
[ Changed to only implement emulated calls for x86_64 ]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4b33dadf37666c0860b88f9e52a16d07bf6d0b03 upstream.
In order to allow breakpoints to emulate call instructions, they need to push
the return address onto the stack. The x86_64 int3 handler adds a small gap
to allow the stack to grow some. Use this gap to add the return address to
be able to emulate a call instruction at the breakpoint location.
These helper functions are added:
int3_emulate_jmp(): changes the location of the regs->ip to return there.
(The next two are only for x86_64)
int3_emulate_push(): to push the address onto the gap in the stack
int3_emulate_call(): push the return address and change regs->ip
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Nicolai Stange <nstange@suse.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: the arch/x86 maintainers <x86@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Joe Lawrence <joe.lawrence@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Mimi Zohar <zohar@linux.ibm.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nayna Jain <nayna@linux.ibm.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: "open list:KERNEL SELFTEST FRAMEWORK" <linux-kselftest@vger.kernel.org>
Cc: stable@vger.kernel.org
Fixes: b700e7f03df5 ("livepatch: kernel: add support for live patching")
Tested-by: Nicolai Stange <nstange@suse.de>
Reviewed-by: Nicolai Stange <nstange@suse.de>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
[ Modified to only work for x86_64 and added comment to int3_emulate_push() ]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2700fefdb2d9751c416ad56897e27d41e409324a upstream.
To allow an int3 handler to emulate a call instruction, it must be able to
push a return address onto the stack. Add a gap to the stack to allow the
int3 handler to push the return address and change the return from int3 to
jump straight to the emulated called function target.
Link: http://lkml.kernel.org/r/20181130183917.hxmti5josgq4clti@treble
Link: http://lkml.kernel.org/r/20190502162133.GX2623@hirez.programming.kicks-ass.net
[
Note, this is needed to allow Live Kernel Patching to not miss calling a
patched function when tracing is enabled. -- Steven Rostedt
]
Cc: stable@vger.kernel.org
Fixes: b700e7f03df5 ("livepatch: kernel: add support for live patching")
Tested-by: Nicolai Stange <nstange@suse.de>
Reviewed-by: Nicolai Stange <nstange@suse.de>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 00abf69dd24f4444d185982379c5cc3bb7b6d1fc upstream.
xfstest generic/452 was triggering a "Busy inodes after umount" warning.
ceph was allowing the mount to go read-only without first flushing out
dirty inodes in the cache. Ensure we sync out the filesystem before
allowing a remount to proceed.
Cc: stable@vger.kernel.org
Link: http://tracker.ceph.com/issues/39571
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 43a0541e312f7136e081e6bf58f6c8a2e9672688 upstream.
Both Tegra30 and Tegra114 have 4 ASID's and the corresponding bitfield of
the TLB_FLUSH register differs from later Tegra generations that have 128
ASID's.
In a result the PTE's are now flushed correctly from TLB and this fixes
problems with graphics (randomly failing tests) on Tegra30.
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 259799ea5a9aa099a267f3b99e1f7078bbaf5c5e upstream.
Use gen_rtx_set instead of gen_rtx_SET. The former is a wrapper macro
that handles the difference between GCC versions implementing
the latter.
This fixes the following error on my system with g++ 5.4.0 as the host
compiler
HOSTCXX -fPIC scripts/gcc-plugins/arm_ssp_per_task_plugin.o
scripts/gcc-plugins/arm_ssp_per_task_plugin.c:42:14: error: macro "gen_rtx_SET" requires 3 arguments, but only 2 given
mask)),
^
scripts/gcc-plugins/arm_ssp_per_task_plugin.c: In function ‘unsigned int arm_pertask_ssp_rtl_execute()’:
scripts/gcc-plugins/arm_ssp_per_task_plugin.c:39:20: error: ‘gen_rtx_SET’ was not declared in this scope
emit_insn_before(gen_rtx_SET
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Fixes: 189af4657186 ("ARM: smp: add support for per-task stack canaries")
Cc: stable@vger.kernel.org
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3428030da004a1128cbdcf93dc03e16f184d845b upstream.
Generalize the helper ovl_open_maybe_copy_up() and use it to copy up file
with data before FS_IOC_SETFLAGS ioctl.
The FS_IOC_SETFLAGS ioctl is a bit of an odd ball in vfs, which probably
caused the confusion. File may be open O_RDONLY, but ioctl modifies the
file. VFS does not call mnt_want_write_file() nor lock inode mutex, but
fs-specific code for FS_IOC_SETFLAGS does. So ovl_ioctl() calls
mnt_want_write_file() for the overlay file, and fs-specific code calls
mnt_want_write_file() for upper fs file, but there was no call for
ovl_want_write() for copy up duration which prevents overlayfs from copying
up on a frozen upper fs.
Fixes: dab5ca8fd9dd ("ovl: add lsattr/chattr support")
Cc: <stable@vger.kernel.org> # v4.19
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0cbade024ba501313da3b7e5dd2a188a6bc491b5 upstream.
fstests generic/228 reported this failure that fuse fallocate does not
honor what 'ulimit -f' has set.
This adds the necessary inode_newsize_ok() check.
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Fixes: 05ba1f082300 ("fuse: add FALLOCATE operation")
Cc: <stable@vger.kernel.org> # v3.5
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9de5be06d0a89ca97b5ab902694d42dfd2bb77d2 upstream.
Writepage requests were cropped to i_size & 0xffffffff, which meant that
mmaped writes to any file larger than 4G might be silently discarded.
Fix by storing the file size in a properly sized variable (loff_t instead
of size_t).
Reported-by: Antonio SJ Musumeci <trapexit@spawn.link>
Fixes: 6eaf4782eb09 ("fuse: writepages: crop secondary requests")
Cc: <stable@vger.kernel.org> # v3.13
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit babc250e278eac7b0e671bdaedf833759b43bb78 upstream.
Rendering calls may be done simultaneously from the workqueue,
dlfb_ops_write, dlfb_ops_ioctl, dlfb_ops_set_par and dlfb_dpy_deferred_io.
The code is robust enough so that it won't crash on concurrent rendering.
However, concurrent rendering may cause display corruption if the same
pixel is simultaneously being rendered. In order to avoid this corruption,
this patch adds a mutex around the rendering calls.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: Bernie Thompson <bernie@plugable.com>
Cc: Ladislav Michl <ladis@linux-mips.org>
Cc: <stable@vger.kernel.org>
[b.zolnierkie: replace "dlfb:" with "uldfb:" in the patch summary]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6b11f9d8433b471fdd3ebed232b43a4b723be6ff upstream.
If a framebuffer device is used as a console, the rendering calls
(copyarea, fillrect, imageblit) may be done with the console spinlock
held. On udlfb, these function call dlfb_handle_damage that takes a
blocking semaphore before acquiring an URB.
In order to fix the bug, this patch changes the calls copyarea, fillrect
and imageblit to offload USB work to a workqueue.
A side effect of this patch is 3x improvement in console scrolling speed
because the device doesn't have to be updated after each copyarea call.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: Bernie Thompson <bernie@plugable.com>
Cc: Ladislav Michl <ladis@linux-mips.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit bd86b6c5c60711dbd4fa21bdb497a188ecb6cf63 upstream.
Remove the unused parameter "data" and unused variable "ret".
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: Bernie Thompson <bernie@plugable.com>
Cc: Ladislav Michl <ladis@linux-mips.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fb903392131a324a243c7731389277db1cd9f8df upstream.
This patch fixes definition of several clock gate and select register
that is wrong for rk3328 referring to the TRM and vendor kernel.
Also use correct number of softrst registers.
Fix clock definition for:
- clk_crypto
- aclk_h265
- pclk_h265
- aclk_h264
- hclk_h264
- aclk_axisram
- aclk_gmac
- aclk_usb3otg
Fixes: fe3511ad8a1c ("clk: rockchip: add clock controller for rk3328")
Cc: stable@vger.kernel.org
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Tested-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit be17ca6ac76a5cfd07cc3a0397dd05d6929fcbbb upstream.
PLLs with tuner_en bit, such as APLL1, need to disable
tuner_en before apply new frequency settings, or the new frequency
settings (pcw) will not be applied.
The tuner_en bit will be disabled during changing PLL rate
and be restored after new settings applied.
Fixes: e2f744a82d725 (clk: mediatek: Add MT2712 clock support)
Cc: <stable@vger.kernel.org>
Signed-off-by: Owen Chen <owen.chen@mediatek.com>
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Reviewed-by: James Liao <jamesjj.liao@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 40db569d6769ffa3864fd1b89616b1a7323568a8 upstream.
There are wrongly set parenthesis in the code that are resulting in a
wrong configuration being programmed for PLLM. The original fix was made
by Danny Huang in the downstream kernel. The patch was tested on Nyan Big
Tegra124 chromebook, PLLM rate changing works correctly now and system
doesn't lock up after changing the PLLM rate due to EMC scaling.
Cc: <stable@vger.kernel.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-By: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9f77a60669d13ed4ddfa6cd7374c9d88da378ffa upstream.
clk_gate_ufs_subsys is a system bus clock, turning off it will
introduce lockup issue during system suspend flow. Let's mark
clk_gate_ufs_subsys as critical clock, thus keeps it on during
system suspend and resume.
Fixes: d374e6fd5088 ("clk: hisilicon: Add clock driver for hi3660 SoC")
Cc: stable@vger.kernel.org
Cc: Zhong Kaihua <zhongkaihua@huawei.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Zhangfei Gao <zhangfei.gao@linaro.org>
Suggested-by: Dong Zhang <zhangdong46@hisilicon.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b1029c9bc078a6f1515f55dd993b507dcc7e3440 upstream.
If we fail to find a good deviceid while trying to pnfs instead of
propogating an error back fallback to doing IO to the MDS. Currently,
code with fals the IO with EINVAL.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Fixes: 8d40b0f14846f ("NFS filelayout:call GETDEVICEINFO after pnfs_layout_process completes"
Cc: stable@vger.kernel.org # v4.11+
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f02f3755dbd14fb935d24b14650fff9ba92243b8 upstream.
stat command with soft mount never return after server is stopped.
When alloc a new client, the state of the client will be set to
NFS4CLNT_LEASE_EXPIRED.
When the server is stopped, the state manager will work, and accord
the state to recover. But the state is NFS4CLNT_LEASE_EXPIRED, it
will drain the slot table and lead other task to wait queue, until
the client recovered. Then the stat command is hung.
When discover server trunking, the client will renew the lease,
but check the client state, it lead the client state corruption.
So, we need to call state manager to recover it when detect server
ip trunking.
Signed-off-by: ZhangXiaoxu <zhangxiaoxu5@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b79656ed44c6865e17bcd93472ec39488bcc4984 upstream.
Systemd triggers the following warning during IPoIB device load:
mlx5_core 0000:00:0c.0 ib0: "systemd-udevd" wants to know my dev_id.
Should it look at dev_port instead?
See Documentation/ABI/testing/sysfs-class-net for more info.
This is caused due to user space attempt to differentiate old systems
without dev_port and new systems with dev_port. In case dev_port will be
zero, the systemd will try to read dev_id instead.
There is no need to print a warning in such case, because it is valid
situation and it is needed to ensure systemd compatibility with old
kernels.
Link: https://github.com/systemd/systemd/blob/master/src/udev/udev-builtin-net_id.c#L358
Cc: <stable@vger.kernel.org> # 4.19
Fixes: f6350da41dc7 ("IB/ipoib: Log sysfs 'dev_id' accesses from userspace")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ddcdc368b1033e19fd3a5f750752e10e28a87826 upstream.
get_zeroed_page() returns a virtual address for the page which is better
than allocating a struct page and doing a permanent kmap on it.
Cc: stable@vger.kernel.org
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Haggai Eran <haggaie@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 107927fa597c99eaeee4f51865ca0956ec71b6a2 upstream.
In imx_media_create_csi_of_links(), the 'struct v4l2_fwnode_link' must
be cleared for each endpoint iteration, otherwise if the remote port
has no "reg" property, link.remote_port will not be reset to zero.
This was discovered on the i.MX53 SMD board, since the OV5642 connects
directly to ipu1_csi0 and has a single source port with no "reg"
property.
Fixes: 621b08eabcddb ("media: staging/imx: remove static media link arrays")
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 904371f90b2c0c749a5ab75478c129a4682ac3d8 upstream.
On i.MX6, the nearest upstream entity to the CSI can only be the
CSI video muxes or the Synopsys DW MIPI CSI-2 receiver.
However the i.MX53 has no CSI video muxes or a MIPI CSI-2 receiver.
So allow for the nearest upstream entity to the CSI to be something
other than those.
Fixes: bf3cfaa712e5c ("media: staging/imx: get CSI bus type from nearest
upstream entity")
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
Damien Le Moal
Nikos Tsironis
Stefan Mätje
Kazufumi Ikeda
Jisheng Zhang
Jean-Philippe Brucker
Lyude Paul
James Prestwood
Nikolai Kostrigin
Yifeng Li
Ard Biesheuvel
Dave Hansen
Nathan Chancellor
Florian Fainelli
Adrian Hunter
Dmitry Osipenko
Masami Hiramatsu
Elazar Leibovich
Peter Zijlstra
Josh Poimboeuf
Jeff Layton
Chris Packham
Amir Goldstein
Liu Bo
Miklos Szeredi
Mikulas Patocka
Jonas Karlman
Owen Chen
Leo Yan
Olga Kornievskaia
ZhangXiaoxu
Leon Romanovsky
Jason Gunthorpe
Steve Longerbeam