| Age | Commit message (Collapse) | Author |
|---|
|
|
|
commit f52bb98f5aded4c43e52f5ce19fb83f7261e9e73 upstream.
Commit 6d526ee26ccd ("arm64: mm: enable CONFIG_HOLES_IN_ZONE for NUMA")
only enabled HOLES_IN_ZONE for NUMA systems because the NUMA code was
choking on the missing zone for nomap pages. This problem doesn't just
apply to NUMA systems.
If the architecture doesn't set HAVE_ARCH_PFN_VALID, pfn_valid() will
return true if the pfn is part of a valid sparsemem section.
When working with multiple pages, the mm code uses pfn_valid_within()
to test each page it uses within the sparsemem section is valid. On
most systems memory comes in MAX_ORDER_NR_PAGES chunks which all
have valid/initialised struct pages. In this case pfn_valid_within()
is optimised out.
Systems where this isn't true (e.g. due to nomap) should set
HOLES_IN_ZONE and provide HAVE_ARCH_PFN_VALID so that mm tests each
page as it works with it.
Currently non-NUMA arm64 systems can't enable HOLES_IN_ZONE, leading to
a VM_BUG_ON():
| page:fffffdff802e1780 is uninitialized and poisoned
| raw: ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff
| raw: ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff
| page dumped because: VM_BUG_ON_PAGE(PagePoisoned(p))
| ------------[ cut here ]------------
| kernel BUG at include/linux/mm.h:978!
| Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
[...]
| CPU: 1 PID: 25236 Comm: dd Not tainted 4.18.0 #7
| Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
| pstate: 40000085 (nZcv daIf -PAN -UAO)
| pc : move_freepages_block+0x144/0x248
| lr : move_freepages_block+0x144/0x248
| sp : fffffe0071177680
[...]
| Process dd (pid: 25236, stack limit = 0x0000000094cc07fb)
| Call trace:
| move_freepages_block+0x144/0x248
| steal_suitable_fallback+0x100/0x16c
| get_page_from_freelist+0x440/0xb20
| __alloc_pages_nodemask+0xe8/0x838
| new_slab+0xd4/0x418
| ___slab_alloc.constprop.27+0x380/0x4a8
| __slab_alloc.isra.21.constprop.26+0x24/0x34
| kmem_cache_alloc+0xa8/0x180
| alloc_buffer_head+0x1c/0x90
| alloc_page_buffers+0x68/0xb0
| create_empty_buffers+0x20/0x1ec
| create_page_buffers+0xb0/0xf0
| __block_write_begin_int+0xc4/0x564
| __block_write_begin+0x10/0x18
| block_write_begin+0x48/0xd0
| blkdev_write_begin+0x28/0x30
| generic_perform_write+0x98/0x16c
| __generic_file_write_iter+0x138/0x168
| blkdev_write_iter+0x80/0xf0
| __vfs_write+0xe4/0x10c
| vfs_write+0xb4/0x168
| ksys_write+0x44/0x88
| sys_write+0xc/0x14
| el0_svc_naked+0x30/0x34
| Code: aa1303e0 90001a01 91296421 94008902 (d4210000)
| ---[ end trace 1601ba47f6e883fe ]---
Remove the NUMA dependency.
Link: https://www.spinics.net/lists/arm-kernel/msg671851.html
Cc: <stable@vger.kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Pavel Tatashin <pavel.tatashin@microsoft.com>
Tested-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7b6924d94a60c6b8c1279ca003e8744e6cd9e8b1 upstream.
'type' is user-controlled, so sanitize it after the bounds check to
avoid using it in speculative execution. This covers the following
potential gadgets detected with the help of smatch:
* fs/ext4/super.c:5741 ext4_quota_read() warn: potential spectre issue
'sb_dqopt(sb)->files' [r]
* fs/ext4/super.c:5778 ext4_quota_write() warn: potential spectre issue
'sb_dqopt(sb)->files' [r]
* fs/f2fs/super.c:1552 f2fs_quota_read() warn: potential spectre issue
'sb_dqopt(sb)->files' [r]
* fs/f2fs/super.c:1608 f2fs_quota_write() warn: potential spectre issue
'sb_dqopt(sb)->files' [r]
* fs/quota/dquot.c:412 mark_info_dirty() warn: potential spectre issue
'sb_dqopt(sb)->info' [w]
* fs/quota/dquot.c:933 dqinit_needed() warn: potential spectre issue
'dquots' [r]
* fs/quota/dquot.c:2112 dquot_commit_info() warn: potential spectre
issue 'dqopt->ops' [r]
* fs/quota/dquot.c:2362 vfs_load_quota_inode() warn: potential spectre
issue 'dqopt->files' [w] (local cap)
* fs/quota/dquot.c:2369 vfs_load_quota_inode() warn: potential spectre
issue 'dqopt->ops' [w] (local cap)
* fs/quota/dquot.c:2370 vfs_load_quota_inode() warn: potential spectre
issue 'dqopt->info' [w] (local cap)
* fs/quota/quota.c:110 quota_getfmt() warn: potential spectre issue
'sb_dqopt(sb)->info' [r]
* fs/quota/quota_v2.c:84 v2_check_quota_file() warn: potential spectre
issue 'quota_magics' [w]
* fs/quota/quota_v2.c:85 v2_check_quota_file() warn: potential spectre
issue 'quota_versions' [w]
* fs/quota/quota_v2.c:96 v2_read_file_info() warn: potential spectre
issue 'dqopt->info' [r]
* fs/quota/quota_v2.c:172 v2_write_file_info() warn: potential spectre
issue 'dqopt->info' [r]
Additionally, a quick inspection indicates there are array accesses with
'type' in quota_on() and quota_off() functions which are also addressed
by this.
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jeremy Cline <jcline@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ad876a18048f43b1f66f5d474b7598538668c5de upstream.
xts setkey callback returns 0 on some error paths.
Fix this by returning -EINVAL.
Cc: <stable@vger.kernel.org> # 4.12+
Fixes: b189817cf789 ("crypto: caam/qi - add ablkcipher and authenc algorithms")
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit cc98963dbaaea93d17608641b8d6942a5327fc31 upstream.
Descriptor address needs to be swapped to CPU endianness before being
DMA unmapped.
Cc: <stable@vger.kernel.org> # 4.8+
Fixes: 261ea058f016 ("crypto: caam - handle core endianness != caam endianness")
Reported-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f1bf9e60a0779ec97de9ecdc353e1d01cdd73f43 upstream.
Crypto engine needs some temporary locations in external memory for
running RSA decrypt forms 2 and 3 (CRT).
These are named "tmp1" and "tmp2" in the PDB.
Update DMA mapping direction of tmp1 and tmp2 from TO_DEVICE to
BIDIRECTIONAL, since engine needs r/w access.
Cc: <stable@vger.kernel.org> # 4.13+
Fixes: 52e26d77b8b3 ("crypto: caam - add support for RSA key form 2")
Fixes: 4a651b122adb ("crypto: caam - add support for RSA key form 3")
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0522236d4f9c5ab2e79889cb020d1acbe5da416e upstream.
This patch fixes sleep-in-atomic bugs in AES-CBC and AES-XTS VMX
implementations. The problem is that the blkcipher_* functions should
not be called in atomic context.
The bugs can be reproduced via the AF_ALG interface by trying to
encrypt/decrypt sufficiently large buffers (at least 64 KiB) using the
VMX implementations of 'cbc(aes)' or 'xts(aes)'. Such operations then
trigger BUG in crypto_yield():
[ 891.863680] BUG: sleeping function called from invalid context at include/crypto/algapi.h:424
[ 891.864622] in_atomic(): 1, irqs_disabled(): 0, pid: 12347, name: kcapi-enc
[ 891.864739] 1 lock held by kcapi-enc/12347:
[ 891.864811] #0: 00000000f5d42c46 (sk_lock-AF_ALG){+.+.}, at: skcipher_recvmsg+0x50/0x530
[ 891.865076] CPU: 5 PID: 12347 Comm: kcapi-enc Not tainted 4.19.0-0.rc0.git3.1.fc30.ppc64le #1
[ 891.865251] Call Trace:
[ 891.865340] [c0000003387578c0] [c000000000d67ea4] dump_stack+0xe8/0x164 (unreliable)
[ 891.865511] [c000000338757910] [c000000000172a58] ___might_sleep+0x2f8/0x310
[ 891.865679] [c000000338757990] [c0000000006bff74] blkcipher_walk_done+0x374/0x4a0
[ 891.865825] [c0000003387579e0] [d000000007e73e70] p8_aes_cbc_encrypt+0x1c8/0x260 [vmx_crypto]
[ 891.865993] [c000000338757ad0] [c0000000006c0ee0] skcipher_encrypt_blkcipher+0x60/0x80
[ 891.866128] [c000000338757b10] [c0000000006ec504] skcipher_recvmsg+0x424/0x530
[ 891.866283] [c000000338757bd0] [c000000000b00654] sock_recvmsg+0x74/0xa0
[ 891.866403] [c000000338757c10] [c000000000b00f64] ___sys_recvmsg+0xf4/0x2f0
[ 891.866515] [c000000338757d90] [c000000000b02bb8] __sys_recvmsg+0x68/0xe0
[ 891.866631] [c000000338757e30] [c00000000000bbe4] system_call+0x5c/0x70
Fixes: 8c755ace357c ("crypto: vmx - Adding CBC routines for VMX module")
Fixes: c07f5d3da643 ("crypto: vmx - Adding support for XTS")
Cc: stable@vger.kernel.org
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 99cbbe56eb8bede625f410ab62ba34673ffa7d21 upstream.
When the number of queues grows beyond 32, the array of queues is
resized but not all members were being copied. Fix by also copying
'tid', 'cpu' and 'set'.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Fixes: e502789302a6e ("perf auxtrace: Add helpers for queuing AUX area tracing data")
Link: http://lkml.kernel.org/r/20180814084608.6563-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 355139a8dba446cc11a424cddbf7afebc3041ba1 upstream.
The code in cap_inode_getsecurity(), introduced by commit 8db6c34f1dbc
("Introduce v3 namespaced file capabilities"), should use
d_find_any_alias() instead of d_find_alias() do handle unhashed dentry
correctly. This is needed, for example, if execveat() is called with an
open but unlinked overlayfs file, because overlayfs unhashes dentry on
unlink.
This is a regression of real life application, first reported at
https://www.spinics.net/lists/linux-unionfs/msg05363.html
Below reproducer and setup can reproduce the case.
const char* exec="echo";
const char *newargv[] = { "echo", "hello", NULL};
const char *newenviron[] = { NULL };
int fd, err;
fd = open(exec, O_PATH);
unlink(exec);
err = syscall(322/*SYS_execveat*/, fd, "", newargv, newenviron,
AT_EMPTY_PATH);
if(err<0)
fprintf(stderr, "execveat: %s\n", strerror(errno));
gcc compile into ~/test/a.out
mount -t overlay -orw,lowerdir=/mnt/l,upperdir=/mnt/u,workdir=/mnt/w
none /mnt/m
cd /mnt/m
cp /bin/echo .
~/test/a.out
Expected result:
hello
Actually result:
execveat: Invalid argument
dmesg:
Invalid argument reading file caps for /dev/fd/3
The 2nd reproducer and setup emulates similar case but for
regular filesystem:
const char* exec="echo";
int fd, err;
char buf[256];
fd = open(exec, O_RDONLY);
unlink(exec);
err = fgetxattr(fd, "security.capability", buf, 256);
if(err<0)
fprintf(stderr, "fgetxattr: %s\n", strerror(errno));
gcc compile into ~/test_fgetxattr
cd /tmp
cp /bin/echo .
~/test_fgetxattr
Result:
fgetxattr: Invalid argument
On regular filesystem, for example, ext4 read xattr from
disk and return to execveat(), will not trigger this issue, however,
the overlay attr handler pass real dentry to vfs_getxattr() will.
This reproducer calls fgetxattr() with an unlinked fd, involkes
vfs_getxattr() then reproduced the case that d_find_alias() in
cap_inode_getsecurity() can't find the unlinked dentry.
Suggested-by: Amir Goldstein <amir73il@gmail.com>
Acked-by: Amir Goldstein <amir73il@gmail.com>
Acked-by: Serge E. Hallyn <serge@hallyn.com>
Fixes: 8db6c34f1dbc ("Introduce v3 namespaced file capabilities")
Cc: <stable@vger.kernel.org> # v4.14
Signed-off-by: Eddie Horng <eddie.horng@mediatek.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3943b040f11ed0cc6d4585fd286a623ca8634547 upstream.
The writeback thread would exit with a lock held when the cache device
is detached via sysfs interface, fix it by releasing the held lock
before exiting the while-loop.
Fixes: fadd94e05c02 (bcache: quit dc->writeback_thread when BCACHE_DEV_DETACHING is set)
Signed-off-by: Shan Hai <shan.hai@oracle.com>
Signed-off-by: Coly Li <colyli@suse.de>
Tested-by: Shenghui Wang <shhuiw@foxmail.com>
Cc: stable@vger.kernel.org #4.17+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 286e87718103acdf85f4ed323a37e4839a8a7c05 upstream.
Commit efda1b5d87cb ("acpi, nfit, libnvdimm: fix / harden ars_status output length handling")
Introduced additional hardening for ambiguity in the ACPI spec for
ars_status output sizing. However, it had a couple of cases mixed up.
Where it should have been checking for (and returning) "out_field[1] -
4" it was using "out_field[1] - 8" and vice versa.
This caused a four byte discrepancy in the buffer size passed on to
the command handler, and in some cases, this caused memory corruption
like:
./daxdev-errors.sh: line 76: 24104 Aborted (core dumped) ./daxdev-errors $busdev $region
malloc(): memory corruption
Program received signal SIGABRT, Aborted.
[...]
#5 0x00007ffff7865a2e in calloc () from /lib64/libc.so.6
#6 0x00007ffff7bc2970 in ndctl_bus_cmd_new_ars_status (ars_cap=ars_cap@entry=0x6153b0) at ars.c:136
#7 0x0000000000401644 in check_ars_status (check=0x7fffffffdeb0, bus=0x604c20) at daxdev-errors.c:144
#8 test_daxdev_clear_error (region_name=<optimized out>, bus_name=<optimized out>)
at daxdev-errors.c:332
Cc: <stable@vger.kernel.org>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Lukasz Dorau <lukasz.dorau@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Fixes: efda1b5d87cb ("acpi, nfit, libnvdimm: fix / harden ars_status output length handling")
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-of-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 82c9a927bc5df6e06b72d206d24a9d10cced4eb5 upstream.
When running in a container with a user namespace, if you call getxattr
with name = "system.posix_acl_access" and size % 8 != 4, then getxattr
silently skips the user namespace fixup that it normally does resulting in
un-fixed-up data being returned.
This is caused by posix_acl_fix_xattr_to_user() being passed the total
buffer size and not the actual size of the xattr as returned by
vfs_getxattr().
This commit passes the actual length of the xattr as returned by
vfs_getxattr() down.
A reproducer for the issue is:
touch acl_posix
setfacl -m user:0:rwx acl_posix
and the compile:
#define _GNU_SOURCE
#include <errno.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <sys/types.h>
#include <unistd.h>
#include <attr/xattr.h>
/* Run in user namespace with nsuid 0 mapped to uid != 0 on the host. */
int main(int argc, void **argv)
{
ssize_t ret1, ret2;
char buf1[128], buf2[132];
int fret = EXIT_SUCCESS;
char *file;
if (argc < 2) {
fprintf(stderr,
"Please specify a file with "
"\"system.posix_acl_access\" permissions set\n");
_exit(EXIT_FAILURE);
}
file = argv[1];
ret1 = getxattr(file, "system.posix_acl_access",
buf1, sizeof(buf1));
if (ret1 < 0) {
fprintf(stderr, "%s - Failed to retrieve "
"\"system.posix_acl_access\" "
"from \"%s\"\n", strerror(errno), file);
_exit(EXIT_FAILURE);
}
ret2 = getxattr(file, "system.posix_acl_access",
buf2, sizeof(buf2));
if (ret2 < 0) {
fprintf(stderr, "%s - Failed to retrieve "
"\"system.posix_acl_access\" "
"from \"%s\"\n", strerror(errno), file);
_exit(EXIT_FAILURE);
}
if (ret1 != ret2) {
fprintf(stderr, "The value of \"system.posix_acl_"
"access\" for file \"%s\" changed "
"between two successive calls\n", file);
_exit(EXIT_FAILURE);
}
for (ssize_t i = 0; i < ret2; i++) {
if (buf1[i] == buf2[i])
continue;
fprintf(stderr,
"Unexpected different in byte %zd: "
"%02x != %02x\n", i, buf1[i], buf2[i]);
fret = EXIT_FAILURE;
}
if (fret == EXIT_SUCCESS)
fprintf(stderr, "Test passed\n");
else
fprintf(stderr, "Test failed\n");
_exit(fret);
}
and run:
./tester acl_posix
On a non-fixed up kernel this should return something like:
root@c1:/# ./t
Unexpected different in byte 16: ffffffa0 != 00
Unexpected different in byte 17: ffffff86 != 00
Unexpected different in byte 18: 01 != 00
and on a fixed kernel:
root@c1:~# ./t
Test passed
Cc: stable@vger.kernel.org
Fixes: 2f6f0654ab61 ("userns: Convert vfs posix_acl support to use kuids and kgids")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=199945
Reported-by: Colin Watson <cjwatson@ubuntu.com>
Signed-off-by: Christian Brauner <christian@brauner.io>
Acked-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit bb24153a3f13dd0dbc1f8055ad97fe346d598f66 upstream.
The default delay 5 jiffies is too much when the kernel is compiled with
HZ=100 - it results in jumpy cursor in Xwindow.
In order to find out the optimal delay, I benchmarked the driver on
1280x720x30fps video. I found out that with HZ=1000, 10ms is acceptable,
but with HZ=250 or HZ=300, we need 4ms, so that the video is played
without any frame skips.
This patch changes the delay to this value.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8c5b044299951acd91e830a688dd920477ea1eda upstream.
I have a USB display adapter using the udlfb driver and I use it on an ARM
board that doesn't have any graphics card. When I plug the adapter in, the
console is properly displayed, however when I unplug and re-plug the
adapter, the console is not displayed and I can't access it until I reboot
the board.
The reason is this:
When the adapter is unplugged, dlfb_usb_disconnect calls
unlink_framebuffer, then it waits until the reference count drops to zero
and then it deallocates the framebuffer. However, the console that is
attached to the framebuffer device keeps the reference count non-zero, so
the framebuffer device is never destroyed. When the USB adapter is plugged
again, it creates a new device /dev/fb1 and the console is not attached to
it.
This patch fixes the bug by unbinding the console from unlink_framebuffer.
The code to unbind the console is moved from do_unregister_framebuffer to
a function unbind_console. When the console is unbound, the reference
count drops to zero and the udlfb driver frees the framebuffer. When the
adapter is plugged back, a new framebuffer is created and the console is
attached to it.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Bernie Thompson <bernie@plugable.com>
Cc: Ladislav Michl <ladis@linux-mips.org>
Cc: stable@vger.kernel.org
[b.zolnierkie: preserve old behavior for do_unregister_framebuffer()]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 38dabd91ff0bde33352ca3cc65ef515599b77a05 upstream.
pwm-tiehrpwm driver disables PWM output by putting it in low output
state via active AQCSFRC register in ehrpwm_pwm_disable(). But, the
AQCSFRC shadow register is not updated. Therefore, when shadow AQCSFRC
register is re-enabled in ehrpwm_pwm_enable() (say to enable second PWM
output), previous settings are lost as shadow register value is loaded
into active register. This results in things like PWMA getting enabled
automatically, when PWMB is enabled and vice versa. Fix this by
updating AQCSFRC shadow register as well during ehrpwm_pwm_disable().
Fixes: 19891b20e7c2 ("pwm: pwm-tiehrpwm: PWM driver support for EHRPWM")
Cc: stable@vger.kernel.org
Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit aa49d628f6e016bcec8c6f8e704b9b18ee697329 upstream.
As per AM335x TRM SPRUH73P "15.2.2.11 ePWM Behavior During Emulation",
TBCTL[15:14] only have effect during emulation suspend events (IOW,
to stop PWM when debugging using a debugger). These bits have no effect
on PWM output during normal running of system. Hence, remove code
accessing these bits as they have no role in enabling/disabling PWMs.
Fixes: 19891b20e7c2 ("pwm: pwm-tiehrpwm: PWM driver support for EHRPWM")
Cc: stable@vger.kernel.org
Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 59965593205fa4044850d35ee3557cf0b7edcd14 upstream.
In ubifs_jnl_update() we sync parent and child inodes to the flash,
in case of xattrs, the parent inode (AKA host inode) has a non-zero
data_len. Therefore we need to adjust synced_i_size too.
This issue was reported by ubifs self tests unter a xattr related work
load.
UBIFS error (ubi0:0 pid 1896): dbg_check_synced_i_size: ui_size is 4, synced_i_size is 0, but inode is clean
UBIFS error (ubi0:0 pid 1896): dbg_check_synced_i_size: i_ino 65, i_mode 0x81a4, i_size 4
Cc: <stable@vger.kernel.org>
Fixes: 1e51764a3c2a ("UBIFS: add new flash file system")
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 11a6fc3dc743e22fb50f2196ec55bee5140d3c52 upstream.
xattr operations can race with unlink and the following assert triggers:
UBIFS assert failed in ubifs_jnl_change_xattr at 1606 (pid 6256)
Fix this by checking i_nlink before working on the host inode.
Cc: <stable@vger.kernel.org>
Fixes: 1e51764a3c2a ("UBIFS: add new flash file system")
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 95a22d2084d72ea067d8323cc85677dba5d97cae upstream.
Check whether the size is within bounds before using it.
If the size is not correct, abort and dump the bad data node.
Cc: Kees Cook <keescook@chromium.org>
Cc: Silvio Cesare <silvio.cesare@gmail.com>
Cc: stable@vger.kernel.org
Fixes: 1e51764a3c2ac ("UBIFS: add new flash file system")
Reported-by: Silvio Cesare <silvio.cesare@gmail.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 08acbdd6fd736b90f8d725da5a0de4de2dd6de62 upstream.
This reverts commit 353748a359f1821ee934afc579cf04572406b420.
It bypassed the linux-mtd review process and fixes the issue not as it
should.
Cc: Kees Cook <keescook@chromium.org>
Cc: Silvio Cesare <silvio.cesare@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit eef19816ada3abd56d9f20c88794cc2fea83ebb2 upstream.
Allocate the buffer after we return early.
Otherwise memory is being leaked.
Cc: <stable@vger.kernel.org>
Fixes: 1e51764a3c2a ("UBIFS: add new flash file system")
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5820f140edef111a9ea2ef414ab2428b8cb805b1 upstream.
The old code would hold the userns_state_mutex indefinitely if
memdup_user_nul stalled due to e.g. a userfault region. Prevent that by
moving the memdup_user_nul in front of the mutex_lock().
Note: This changes the error precedence of invalid buf/count/*ppos vs
map already written / capabilities missing.
Fixes: 22d917d80e84 ("userns: Rework the user_namespace adding uid/gid...")
Cc: stable@vger.kernel.org
Signed-off-by: Jann Horn <jannh@google.com>
Acked-by: Christian Brauner <christian@brauner.io>
Acked-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 42a0cc3478584d4d63f68f2f5af021ddbea771fa upstream.
Holding uts_sem as a writer while accessing userspace memory allows a
namespace admin to stall all processes that attempt to take uts_sem.
Instead, move data through stack buffers and don't access userspace memory
while uts_sem is held.
Cc: stable@vger.kernel.org
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1c48db44924298ad0cb5a6386b88017539be8822 upstream.
PFSID should be used in the invalidation descriptor for flushing
device IOTLBs on SRIOV VFs.
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: stable@vger.kernel.org
Cc: "Ashok Raj" <ashok.raj@intel.com>
Cc: "Lu Baolu" <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0f725561e168485eff7277d683405c05b192f537 upstream.
When SRIOV VF device IOTLB is invalidated, we need to provide
the PF source ID such that IOMMU hardware can gauge the depth
of invalidation queue which is shared among VFs. This is needed
when device invalidation throttle (DIT) capability is supported.
This patch adds bit definitions for checking and tracking PFSID.
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: stable@vger.kernel.org
Cc: "Ashok Raj" <ashok.raj@intel.com>
Cc: "Lu Baolu" <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a6f572084fbee8b30f91465f4a085d7a90901c57 upstream.
Will noted that only checking mm_users is incorrect; we should also
check mm_count in order to cover CPUs that have a lazy reference to
this mm (and could do speculative TLB operations).
If removing this turns out to be a performance issue, we can
re-instate a more complete check, but in tlb_table_flush() eliding the
call_rcu_sched().
Fixes: 267239116987 ("mm, powerpc: move the RCU page-table freeing into generic code")
Reported-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Rik van Riel <riel@surriel.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: David Miller <davem@davemloft.net>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6e1811900b6fe6f2b4665dba6bd6ed32c6b98575 upstream.
On all versions of Tegra30 Cardhu, the reset signal to the NXP PCA9546
I2C mux is connected to the Tegra GPIO BB0. Currently, this pin on the
Tegra is not configured as a GPIO but as a special-function IO (SFIO)
that is multiplexing the pin to an I2S controller. On exiting system
suspend, I2C commands sent to the PCA9546 are failing because there is
no ACK. Although it is not possible to see exactly what is happening
to the reset during suspend, by ensuring it is configured as a GPIO
and driven high, to de-assert the reset, the failures are no longer
seen.
Please note that this GPIO is also used to drive the reset signal
going to the camera connector on the board. However, given that there
is no camera support currently for Cardhu, this should not have any
impact.
Fixes: 40431d16ff11 ("ARM: tegra: enable PCA9546 on Cardhu")
Cc: stable@vger.kernel.org
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8618289c46556fd4dd259a1af02ccc448032f48d upstream.
We must drop the lock before we can sleep in referring_call_exists().
Reported-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Fixes: 045d2a6d076a ("NFSv4.1: Delay callback processing...")
Cc: stable@vger.kernel.org # v4.9+
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d0fbb1d8a194c0ec0180c1d073ad709e45503a43 upstream.
The use of the inode->i_lock was converted to a mutex, but we forgot
to remove the old inode unlock/lock() pair that allowed the layout
segment to be put inside the loop.
Reported-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Fixes: e824f99adaaf1 ("NFSv4: Use a mutex to protect the per-inode commit...")
Cc: stable@vger.kernel.org # v4.14+
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0f90be132cbf1537d87a6a8b9e80867adac892f6 upstream.
After a live data migration event at the NFS server, the client may send
I/O requests to the wrong server, causing a live hang due to repeated
recovery events. On the wire, this will appear as an I/O request failing
with NFS4ERR_BADSESSION, followed by successful CREATE_SESSION, repeatedly.
NFS4ERR_BADSSESSION is returned because the session ID being used was
issued by the other server and is not valid at the old server.
The failure is caused by async worker threads having cached the transport
(xprt) in the rpc_task structure. After the migration recovery completes,
the task is redispatched and the task resends the request to the wrong
server based on the old value still present in tk_xprt.
The solution is to recompute the tk_xprt field of the rpc_task structure
so that the request goes to the correct server.
Signed-off-by: Bill Baker <bill.baker@oracle.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Helen Chao <helen.chao@oracle.com>
Fixes: fb43d17210ba ("SUNRPC: Use the multipath iterator to assign a ...")
Cc: stable@vger.kernel.org # v4.9+
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0914bb965e38a055e9245637aed117efbe976e91 upstream.
"dev->nr_children" is the number of children which were parsed
successfully in bl_parse_stripe(). It could be all of them and then, in
that case, it is equal to v->stripe.volumes_count. Either way, the >
should be >= so that we don't go beyond the end of what we're supposed
to.
Fixes: 5c83746a0cf2 ("pnfs/blocklayout: in-kernel GETDEVICEINFO XDR parsing")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org # 3.17+
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fc8ebd01deeb12728c83381f6ec923e4a192ffd3 upstream.
The value that struct cftype .write() method returns is then directly
returned to userspace as the value returned by write() syscall, so it
should be the number of bytes actually written (or consumed) and not zero.
Returning zero from write() syscall makes programs like /bin/echo or bash
spin.
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Fixes: e21b7a0b9887 ("block, bfq: add full hierarchical scheduling and cgroups support")
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fec3259c9f747c039f90e99570540114c8d81a14 upstream.
Cache invalidation macros use cache line size to iterate over
invalidated cache lines, assuming that all cache ways are invalidated by
single instruction, but xtensa ISA recommends to not assume that for
future compatibility:
In some implementations all ways at index Addry-1..z are invalidated
regardless of the specified way, but for future compatibility this
behavior should not be assumed.
Iterate over all cache ways in ___invalidate_icache_all and
___invalidate_dcache_all.
Cc: stable@vger.kernel.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit be75de25251f7cf3e399ca1f584716a95510d24a upstream.
When building kernel for xtensa cores with big cache lines (e.g. 128
bytes or more) __loop_cache_all and __loop_cache_page may generate
assembly instructions with immediate fields that are too big. This
results in the following build errors:
arch/xtensa/mm/misc.S: Assembler messages:
arch/xtensa/mm/misc.S:464: Error: operand 2 of 'diwbi' has invalid value '256'
arch/xtensa/mm/misc.S:464: Error: operand 2 of 'diwbi' has invalid value '384'
arch/xtensa/kernel/head.S: Assembler messages:
arch/xtensa/kernel/head.S:172: Error: operand 2 of 'diu' has invalid value '256'
arch/xtensa/kernel/head.S:172: Error: operand 2 of 'diu' has invalid value '384'
arch/xtensa/kernel/head.S:176: Error: operand 2 of 'iiu' has invalid value '256'
arch/xtensa/kernel/head.S:176: Error: operand 2 of 'iiu' has invalid value '384'
arch/xtensa/kernel/head.S:255: Error: operand 2 of 'diwb' has invalid value '256'
arch/xtensa/kernel/head.S:255: Error: operand 2 of 'diwb' has invalid value '384'
Add parameter max_immed to these macros and use it to limit values of
immediate operands. Extract common code of these macros into the new
macro __loop_cache_unroll.
Cc: stable@vger.kernel.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8cfbdbdc24815417a3ab35101ccf706b9a23ff17 upstream.
Commit 76fa4975f3ed ("KVM: PPC: Check if IOMMU page is contained in
the pinned physical page", 2018-07-17) added some checks to ensure
that guest DMA mappings don't attempt to map more than the guest is
entitled to access. However, errors in the logic mean that legitimate
guest requests to map pages for DMA are being denied in some
situations. Specifically, if the first page of the range passed to
mm_iommu_get() is mapped with a normal page, and subsequent pages are
mapped with transparent huge pages, we end up with mem->pageshift ==
0. That means that the page size checks in mm_iommu_ua_to_hpa() and
mm_iommu_up_to_hpa_rm() will always fail for every page in that
region, and thus the guest can never map any memory in that region for
DMA, typically leading to a flood of error messages like this:
qemu-system-ppc64: VFIO_MAP_DMA: -22
qemu-system-ppc64: vfio_dma_map(0x10005f47780, 0x800000000000000, 0x10000, 0x7fff63ff0000) = -22 (Invalid argument)
The logic errors in mm_iommu_get() are:
(a) use of 'ua' not 'ua + (i << PAGE_SHIFT)' in the find_linux_pte()
call (meaning that find_linux_pte() returns the pte for the
first address in the range, not the address we are currently up
to);
(b) use of 'pageshift' as the variable to receive the hugepage shift
returned by find_linux_pte() - for a normal page this gets set
to 0, leading to us setting mem->pageshift to 0 when we conclude
that the pte returned by find_linux_pte() didn't match the page
we were looking at;
(c) comparing 'compshift', which is a page order, i.e. log base 2 of
the number of pages, with 'pageshift', which is a log base 2 of
the number of bytes.
To fix these problems, this patch introduces 'cur_ua' to hold the
current user address and uses that in the find_linux_pte() call;
introduces 'pteshift' to hold the hugepage shift found by
find_linux_pte(); and compares 'pteshift' with 'compshift +
PAGE_SHIFT' rather than 'compshift'.
The patch also moves the local_irq_restore to the point after the PTE
pointer returned by find_linux_pte() has been dereferenced because
otherwise the PTE could change underneath us, and adds a check to
avoid doing the find_linux_pte() call once mem->pageshift has been
reduced to PAGE_SHIFT, as an optimization.
Fixes: 76fa4975f3ed ("KVM: PPC: Check if IOMMU page is contained in the pinned physical page")
Cc: stable@vger.kernel.org # v4.12+
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0027ff2a75f9dcf0537ac0a65c5840b0e21a4950 upstream.
Two bug fixes:
1) missing entries in the l1d_param array; this can cause a host crash
if an access attempts to reach the missing entry. Future-proof the get
function against any overflows as well. However, the two entries
VMENTER_L1D_FLUSH_EPT_DISABLED and VMENTER_L1D_FLUSH_NOT_REQUIRED must
not be accepted by the parse function, so disable them there.
2) invalid values must be rejected even if the CPU does not have the
bug, so test for them before checking boot_cpu_has(X86_BUG_L1TF)
... and a small refactoring, since the .cmd field is redundant with
the index in the array.
Reported-by: Bandan Das <bsd@redhat.com>
Cc: stable@vger.kernel.org
Fixes: a7b9020b06ec6d7c3f3b0d4ef1a9eba12654f4f7
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3df6f61fff49632492490fb6e42646b803a9958a upstream.
Commit ea0212f40c6 (power: auto select CONFIG_SRCU) made the code in
drivers/base/power/wakeup.c use SRCU instead of RCU, but it forgot to
select CONFIG_SRCU in Kconfig, which leads to the following build
error if CONFIG_SRCU is not selected somewhere else:
drivers/built-in.o: In function `wakeup_source_remove':
(.text+0x3c6fc): undefined reference to `synchronize_srcu'
drivers/built-in.o: In function `pm_print_active_wakeup_sources':
(.text+0x3c7a8): undefined reference to `__srcu_read_lock'
drivers/built-in.o: In function `pm_print_active_wakeup_sources':
(.text+0x3c84c): undefined reference to `__srcu_read_unlock'
drivers/built-in.o: In function `device_wakeup_arm_wake_irqs':
(.text+0x3d1d8): undefined reference to `__srcu_read_lock'
drivers/built-in.o: In function `device_wakeup_arm_wake_irqs':
(.text+0x3d228): undefined reference to `__srcu_read_unlock'
drivers/built-in.o: In function `device_wakeup_disarm_wake_irqs':
(.text+0x3d24c): undefined reference to `__srcu_read_lock'
drivers/built-in.o: In function `device_wakeup_disarm_wake_irqs':
(.text+0x3d29c): undefined reference to `__srcu_read_unlock'
drivers/built-in.o:(.data+0x4158): undefined reference to `process_srcu'
Fix this error by selecting CONFIG_SRCU when PM_SLEEP is enabled.
Fixes: ea0212f40c6 (power: auto select CONFIG_SRCU)
Cc: 4.2+ <stable@vger.kernel.org> # 4.2+
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
[ rjw: Minor subject/changelog fixups ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2a3eb51e30b9ac66fe1b75877627a7e4aaeca24a upstream.
If cppc_cpufreq.ko is deleted at the same time that tuned-adm is
changing profiles, there is a small chance that a race can occur
between cpufreq_dbs_governor_exit() and cpufreq_dbs_governor_limits()
resulting in a system failure when the latter tries to use
policy->governor_data that has been freed by the former.
This patch uses gov_dbs_data_mutex to synchronize access.
Fixes: e788892ba3cc (cpufreq: governor: Get rid of governor events)
Signed-off-by: Henry Willard <henry.willard@oracle.com>
[ rjw: Subject, minor white space adjustment ]
Cc: 4.8+ <stable@vger.kernel.org> # 4.8+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c8bd134a4bddafe5917d163eea73873932c15e83 upstream.
The call to strlcpy in backing_dev_store is incorrect. It should take
the size of the destination buffer instead of the size of the source
buffer. Additionally, ignore the newline character (\n) when reading
the new file_name buffer. This makes it possible to set the backing_dev
as follows:
echo /dev/sdX > /sys/block/zram0/backing_dev
The reason it worked before was the fact that strlcpy() copies 'len - 1'
bytes, which is strlen(buf) - 1 in our case, so it accidentally didn't
copy the trailing new line symbol. Which also means that "echo -n
/dev/sdX" most likely was broken.
Signed-off-by: Peter Kalauskas <peskal@google.com>
Link: http://lkml.kernel.org/r/20180813061623.GC64836@rodete-desktop-imager.corp.google.com
Acked-by: Minchan Kim <minchan@kernel.org>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: <stable@vger.kernel.org> [4.14+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 67810693077afc1ebf9e1646af300436cb8103c2 upstream.
Only upper dir can be impure, but if we are in the middle of
iterating a lower real dir, dir could be copied up and marked
impure. We only want the impure cache if we started iterating
a real upper dir to begin with.
Aditya Kali reported that the following reproducer hits the
WARN_ON(!cache->refcount) in ovl_get_cache():
docker run --rm drupal:8.5.4-fpm-alpine \
sh -c 'cd /var/www/html/vendor/symfony && \
chown -R www-data:www-data . && ls -l .'
Reported-by: Aditya Kali <adityakali@google.com>
Tested-by: Aditya Kali <adityakali@google.com>
Fixes: 4edb83bb1041 ('ovl: constant d_ino for non-merge dirs')
Cc: <stable@vger.kernel.org> # v4.14
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6afebb70ee7a4bde106dc1a875e7ac7997248f84 upstream.
Fixes https://bugs.linaro.org/show_bug.cgi?id=3903
LTP Functional tests have caused a bad paging request when triggering
the regmap_read_debugfs() logic of the device PMIC Hi6553 (reading
regmap/f8000000.pmic/registers file during read_all test):
Unable to handle kernel paging request at virtual address ffff0
[ffff00000984e000] pgd=0000000077ffe803, pud=0000000077ffd803,0
Internal error: Oops: 96000007 [#1] SMP
...
Hardware name: HiKey Development Board (DT)
...
Call trace:
regmap_mmio_read8+0x24/0x40
regmap_mmio_read+0x48/0x70
_regmap_bus_reg_read+0x38/0x48
_regmap_read+0x68/0x170
regmap_read+0x50/0x78
regmap_read_debugfs+0x1a0/0x308
regmap_map_read_file+0x48/0x58
full_proxy_read+0x68/0x98
__vfs_read+0x48/0x80
vfs_read+0x94/0x150
SyS_read+0x6c/0xd8
el0_svc_naked+0x30/0x34
Code: aa1e03e0 d503201f f9400280 8b334000 (39400000)
Investigations have showed that, when triggered by debugfs read()
handler, the mmio regmap logic was reading a bigger (16k) register area
than the one mapped by devm_ioremap_resource() during hi655x-pmic probe
time (4k).
This commit changes hi655x's max register, according to HW specs, to be
the same as the one declared in the pmic device in hi6220's dts, fixing
the issue.
Cc: <stable@vger.kernel.org> #v4.9 #v4.14 #v4.16 #v4.17
Signed-off-by: Rafael David Tinoco <rafael.tinoco@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 016f8ffc48cb01d1e7701649c728c5d2e737d295 upstream.
While debugging another bug, I was looking at all the synchronize*()
functions being used in kernel/trace, and noticed that trace_uprobes was
using synchronize_sched(), with a comment to synchronize with
{u,ret}_probe_trace_func(). When looking at those functions, the data is
protected with "rcu_read_lock()" and not with "rcu_read_lock_sched()". This
is using the wrong synchronize_*() function.
Link: http://lkml.kernel.org/r/20180809160553.469e1e32@gandalf.local.home
Cc: stable@vger.kernel.org
Fixes: 70ed91c6ec7f8 ("tracing/uprobes: Support ftrace_event_file base multibuffer")
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6e9df95b76cad18f7b217bdad7bb8a26d63b8c47 upstream.
livepatch module author can pass module name/old function name with more
than the defined character limit. With obj->name length greater than
MODULE_NAME_LEN, the livepatch module gets loaded but waits forever on
the module specified by obj->name to be loaded. It also populates a /sys
directory with an untruncated object name.
In the case of funcs->old_name length greater then KSYM_NAME_LEN, it
would not match against any of the symbol table entries. Instead loop
through the symbol table comparing them against a nonexisting function,
which can be avoided.
The same issues apply, to misspelled/incorrect names. At least gatekeep
the modules with over the limit string length, by checking for their
length during livepatch module registration.
Cc: stable@vger.kernel.org
Signed-off-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d1c392c9e2a301f38998a353f467f76414e38725 upstream.
I hit the following splat in my tests:
------------[ cut here ]------------
IRQs not enabled as expected
WARNING: CPU: 3 PID: 0 at kernel/time/tick-sched.c:982 tick_nohz_idle_enter+0x44/0x8c
Modules linked in: ip6t_REJECT nf_reject_ipv6 ip6table_filter ip6_tables ipv6
CPU: 3 PID: 0 Comm: swapper/3 Not tainted 4.19.0-rc2-test+ #2
Hardware name: MSI MS-7823/CSM-H87M-G43 (MS-7823), BIOS V1.6 02/22/2014
EIP: tick_nohz_idle_enter+0x44/0x8c
Code: ec 05 00 00 00 75 26 83 b8 c0 05 00 00 00 75 1d 80 3d d0 36 3e c1 00
75 14 68 94 63 12 c1 c6 05 d0 36 3e c1 01 e8 04 ee f8 ff <0f> 0b 58 fa bb a0
e5 66 c1 e8 25 0f 04 00 64 03 1d 28 31 52 c1 8b
EAX: 0000001c EBX: f26e7f8c ECX: 00000006 EDX: 00000007
ESI: f26dd1c0 EDI: 00000000 EBP: f26e7f40 ESP: f26e7f38
DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010296
CR0: 80050033 CR2: 0813c6b0 CR3: 2f342000 CR4: 001406f0
Call Trace:
do_idle+0x33/0x202
cpu_startup_entry+0x61/0x63
start_secondary+0x18e/0x1ed
startup_32_smp+0x164/0x168
irq event stamp: 18773830
hardirqs last enabled at (18773829): [<c040150c>] trace_hardirqs_on_thunk+0xc/0x10
hardirqs last disabled at (18773830): [<c040151c>] trace_hardirqs_off_thunk+0xc/0x10
softirqs last enabled at (18773824): [<c0ddaa6f>] __do_softirq+0x25f/0x2bf
softirqs last disabled at (18773767): [<c0416bbe>] call_on_stack+0x45/0x4b
---[ end trace b7c64aa79e17954a ]---
After a bit of debugging, I found what was happening. This would trigger
when performing "perf" with a high NMI interrupt rate, while enabling and
disabling function tracer. Ftrace uses breakpoints to convert the nops at
the start of functions to calls to the function trampolines. The breakpoint
traps disable interrupts and this makes calls into lockdep via the
trace_hardirqs_off_thunk in the entry.S code. What happens is the following:
do_idle {
[interrupts enabled]
<interrupt> [interrupts disabled]
TRACE_IRQS_OFF [lockdep says irqs off]
[...]
TRACE_IRQS_IRET
test if pt_regs say return to interrupts enabled [yes]
TRACE_IRQS_ON [lockdep says irqs are on]
<nmi>
nmi_enter() {
printk_nmi_enter() [traced by ftrace]
[ hit ftrace breakpoint ]
<breakpoint exception>
TRACE_IRQS_OFF [lockdep says irqs off]
[...]
TRACE_IRQS_IRET [return from breakpoint]
test if pt_regs say interrupts enabled [no]
[iret back to interrupt]
[iret back to code]
tick_nohz_idle_enter() {
lockdep_assert_irqs_enabled() [lockdep say no!]
Although interrupts are indeed enabled, lockdep thinks it is not, and since
we now do asserts via lockdep, it gives a false warning. The issue here is
that printk_nmi_enter() is called before lockdep_off(), which disables
lockdep (for this reason) in NMIs. By simply not allowing ftrace to see
printk_nmi_enter() (via notrace annotation) we keep lockdep from getting
confused.
Cc: stable@vger.kernel.org
Fixes: 42a0bb3f71383 ("printk/nmi: generic solution for safe printk in NMI")
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 757d9140072054528b13bbe291583d9823cde195 upstream.
Masami Hiramatsu reported:
Current trace-enable attribute in sysfs returns an error
if user writes the same setting value as current one,
e.g.
# cat /sys/block/sda/trace/enable
0
# echo 0 > /sys/block/sda/trace/enable
bash: echo: write error: Invalid argument
# echo 1 > /sys/block/sda/trace/enable
# echo 1 > /sys/block/sda/trace/enable
bash: echo: write error: Device or resource busy
But this is not a preferred behavior, it should ignore
if new setting is same as current one. This fixes the
problem as below.
# cat /sys/block/sda/trace/enable
0
# echo 0 > /sys/block/sda/trace/enable
# echo 1 > /sys/block/sda/trace/enable
# echo 1 > /sys/block/sda/trace/enable
Link: http://lkml.kernel.org/r/20180816103802.08678002@gandalf.local.home
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Cc: stable@vger.kernel.org
Fixes: cd649b8bb830d ("blktrace: remove sysfs_blk_trace_enable_show/store()")
Reported-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f143641bfef9a4a60c57af30de26c63057e7e695 upstream.
Currently, when one echo's in 1 into tracing_on, the current tracer's
"start()" function is executed, even if tracing_on was already one. This can
lead to strange side effects. One being that if the hwlat tracer is enabled,
and someone does "echo 1 > tracing_on" into tracing_on, the hwlat tracer's
start() function is called again which will recreate another kernel thread,
and make it unable to remove the old one.
Link: http://lkml.kernel.org/r/1533120354-22923-1-git-send-email-erica.bugden@linutronix.de
Cc: stable@vger.kernel.org
Fixes: 2df8f8a6a897e ("tracing: Fix regression with irqsoff tracer and tracing_on file")
Reported-by: Erica Bugden <erica.bugden@linutronix.de>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5c8b84f410b3819d14cb1ebf32e4b3714b5a6e0b upstream.
Do not set the system power-off callback and omap power-off rtc pointer
until we're done setting up our device to avoid leaving stale pointers
around after a late probe error.
Fixes: 97ea1906b3c2 ("rtc: omap: Support ext_wakeup configuration")
Cc: stable <stable@vger.kernel.org> # 4.9
Cc: Marcin Niestroj <m.niestroj@grinn-global.com>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c3cc1b0fc27508da53fe955a3b23d03964410682 upstream.
Currently, when all modules, including VMCI and VMware balloon are built
into the kernel, the initialization of the balloon happens before the
VMCI is probed. As a result, the balloon fails to initialize the VMCI
doorbell, which it uses to get asynchronous requests for balloon size
changes.
The problem can be seen in the logs, in the form of the following
message:
"vmw_balloon: failed to initialize vmci doorbell"
The driver would work correctly but slightly less efficiently, probing
for requests periodically. This patch changes the balloon to be
initialized using late_initcall() instead of module_init() to address
this issue. It does not address a situation in which VMCI is built as a
module and the balloon is built into the kernel.
Fixes: 48e3d668b790 ("VMware balloon: Enable notification via VMCI")
Cc: stable@vger.kernel.org
Reviewed-by: Xavier Deguillard <xdeguillard@vmware.com>
Signed-off-by: Nadav Amit <namit@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ce664331b2487a5d244a51cbdd8cb54f866fbe5d upstream.
When vmballoon_vmci_init() sets a doorbell using VMCI_DOORBELL_SET, for
some reason it does not consider the status and looks at the result.
However, the hypervisor does not update the result - it updates the
status. This might cause VMCI doorbell not to be enabled, resulting in
degraded performance.
Fixes: 48e3d668b790 ("VMware balloon: Enable notification via VMCI")
Cc: stable@vger.kernel.org
Reviewed-by: Xavier Deguillard <xdeguillard@vmware.com>
Signed-off-by: Nadav Amit <namit@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5081efd112560d3febb328e627176235b250d59d upstream.
If the hypervisor sets 2MB batching is on, while batching is cleared,
the balloon code breaks. In this case the legacy mechanism is used with
2MB page. The VM would report a 2MB page is ballooned, and the
hypervisor would only take the first 4KB.
While the hypervisor should not report such settings, make the code more
robust by not enabling 2MB support without batching.
Fixes: 365bd7ef7ec8e ("VMware balloon: Support 2m page ballooning.")
Cc: stable@vger.kernel.org
Reviewed-by: Xavier Deguillard <xdeguillard@vmware.com>
Signed-off-by: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
Greg Kroah-Hartman
James Morse
Jeremy Cline
Horia Geantă
Ondrej Mosnacek
Adrian Hunter
Eddie.Horng
Shan Hai
Vishal Verma
Christian Brauner
Mikulas Patocka
Vignesh R
Richard Weinberger
Jann Horn
Jacob Pan
Peter Zijlstra
Jon Hunter
Trond Myklebust
Bill Baker
Dan Carpenter
Maciej S. Szmigiero
Max Filippov
Paul Mackerras
Paolo Bonzini
zhangyi (F)
Henry Willard
Peter Kalauskas
Amir Goldstein
Rafael David Tinoco
Steven Rostedt (VMware)
Kamalesh Babulal
Johan Hovold
Nadav Amit