1 files changed, 139 insertions, 42 deletions

diff --git a/arch/x86/kernel/cpu/microcode/core.c b/arch/x86/kernel/cpu/microcode/core.c
index e4fc595cd6ea..021c90464cc2 100644
--- a/arch/x86/kernel/cpu/microcode/core.c
+++ b/arch/x86/kernel/cpu/microcode/core.c
@@ -22,13 +22,16 @@
 #define pr_fmt(fmt) "microcode: " fmt
 
 #include <linux/platform_device.h>
+#include <linux/stop_machine.h>
 #include <linux/syscore_ops.h>
 #include <linux/miscdevice.h>
 #include <linux/capability.h>
 #include <linux/firmware.h>
 #include <linux/kernel.h>
+#include <linux/delay.h>
 #include <linux/mutex.h>
 #include <linux/cpu.h>
+#include <linux/nmi.h>
 #include <linux/fs.h>
 #include <linux/mm.h>
 
@@ -64,6 +67,11 @@ LIST_HEAD(microcode_cache);
  */
 static DEFINE_MUTEX(microcode_mutex);
 
+/*
+ * Serialize late loading so that CPUs get updated one-by-one.
+ */
+static DEFINE_SPINLOCK(update_lock);
+
 struct ucode_cpu_info		ucode_cpu_info[NR_CPUS];
 
 struct cpu_info_ctx {
@@ -373,26 +381,23 @@ static int collect_cpu_info(int cpu)
 	return ret;
 }
 
-struct apply_microcode_ctx {
-	int err;
-};
-
 static void apply_microcode_local(void *arg)
 {
-	struct apply_microcode_ctx *ctx = arg;
+	enum ucode_state *err = arg;
 
-	ctx->err = microcode_ops->apply_microcode(smp_processor_id());
+	*err = microcode_ops->apply_microcode(smp_processor_id());
 }
 
 static int apply_microcode_on_target(int cpu)
 {
-	struct apply_microcode_ctx ctx = { .err = 0 };
+	enum ucode_state err;
 	int ret;
 
-	ret = smp_call_function_single(cpu, apply_microcode_local, &ctx, 1);
-	if (!ret)
-		ret = ctx.err;
-
+	ret = smp_call_function_single(cpu, apply_microcode_local, &err, 1);
+	if (!ret) {
+		if (err == UCODE_ERROR)
+			ret = 1;
+	}
 	return ret;
 }
 
@@ -489,31 +494,124 @@ static void __exit microcode_dev_exit(void)
 /* fake device for request_firmware */
 static struct platform_device	*microcode_pdev;
 
-static int reload_for_cpu(int cpu)
+/*
+ * Late loading dance. Why the heavy-handed stomp_machine effort?
+ *
+ * - HT siblings must be idle and not execute other code while the other sibling
+ *   is loading microcode in order to avoid any negative interactions caused by
+ *   the loading.
+ *
+ * - In addition, microcode update on the cores must be serialized until this
+ *   requirement can be relaxed in the future. Right now, this is conservative
+ *   and good.
+ */
+#define SPINUNIT 100 /* 100 nsec */
+
+static int check_online_cpus(void)
 {
-	struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
-	enum ucode_state ustate;
-	int err = 0;
+	if (num_online_cpus() == num_present_cpus())
+		return 0;
 
-	if (!uci->valid)
-		return err;
+	pr_err("Not all CPUs online, aborting microcode update.\n");
 
-	ustate = microcode_ops->request_microcode_fw(cpu, &microcode_pdev->dev, true);
-	if (ustate == UCODE_OK)
-		apply_microcode_on_target(cpu);
-	else
-		if (ustate == UCODE_ERROR)
-			err = -EINVAL;
-	return err;
+	return -EINVAL;
+}
+
+static atomic_t late_cpus_in;
+static atomic_t late_cpus_out;
+
+static int __wait_for_cpus(atomic_t *t, long long timeout)
+{
+	int all_cpus = num_online_cpus();
+
+	atomic_inc(t);
+
+	while (atomic_read(t) < all_cpus) {
+		if (timeout < SPINUNIT) {
+			pr_err("Timeout while waiting for CPUs rendezvous, remaining: %d\n",
+				all_cpus - atomic_read(t));
+			return 1;
+		}
+
+		ndelay(SPINUNIT);
+		timeout -= SPINUNIT;
+
+		touch_nmi_watchdog();
+	}
+	return 0;
+}
+
+/*
+ * Returns:
+ * < 0 - on error
+ *   0 - no update done
+ *   1 - microcode was updated
+ */
+static int __reload_late(void *info)
+{
+	int cpu = smp_processor_id();
+	enum ucode_state err;
+	int ret = 0;
+
+	/*
+	 * Wait for all CPUs to arrive. A load will not be attempted unless all
+	 * CPUs show up.
+	 * */
+	if (__wait_for_cpus(&late_cpus_in, NSEC_PER_SEC))
+		return -1;
+
+	spin_lock(&update_lock);
+	apply_microcode_local(&err);
+	spin_unlock(&update_lock);
+
+	if (err > UCODE_NFOUND) {
+		pr_warn("Error reloading microcode on CPU %d\n", cpu);
+		return -1;
+	/* siblings return UCODE_OK because their engine got updated already */
+	} else if (err == UCODE_UPDATED || err == UCODE_OK) {
+		ret = 1;
+	} else {
+		return ret;
+	}
+
+	/*
+	 * Increase the wait timeout to a safe value here since we're
+	 * serializing the microcode update and that could take a while on a
+	 * large number of CPUs. And that is fine as the *actual* timeout will
+	 * be determined by the last CPU finished updating and thus cut short.
+	 */
+	if (__wait_for_cpus(&late_cpus_out, NSEC_PER_SEC * num_online_cpus()))
+		panic("Timeout during microcode update!\n");
+
+	return ret;
+}
+
+/*
+ * Reload microcode late on all CPUs. Wait for a sec until they
+ * all gather together.
+ */
+static int microcode_reload_late(void)
+{
+	int ret;
+
+	atomic_set(&late_cpus_in,  0);
+	atomic_set(&late_cpus_out, 0);
+
+	ret = stop_machine_cpuslocked(__reload_late, NULL, cpu_online_mask);
+	if (ret > 0)
+		microcode_check();
+
+	return ret;
 }
 
 static ssize_t reload_store(struct device *dev,
 			    struct device_attribute *attr,
 			    const char *buf, size_t size)
 {
+	enum ucode_state tmp_ret = UCODE_OK;
+	int bsp = boot_cpu_data.cpu_index;
 	unsigned long val;
-	int cpu;
-	ssize_t ret = 0, tmp_ret;
+	ssize_t ret = 0;
 
 	ret = kstrtoul(buf, 0, &val);
 	if (ret)
@@ -522,23 +620,24 @@ static ssize_t reload_store(struct device *dev,
 	if (val != 1)
 		return size;
 
+	tmp_ret = microcode_ops->request_microcode_fw(bsp, &microcode_pdev->dev, true);
+	if (tmp_ret != UCODE_NEW)
+		return size;
+
 	get_online_cpus();
-	mutex_lock(&microcode_mutex);
-	for_each_online_cpu(cpu) {
-		tmp_ret = reload_for_cpu(cpu);
-		if (tmp_ret != 0)
-			pr_warn("Error reloading microcode on CPU %d\n", cpu);
 
-		/* save retval of the first encountered reload error */
-		if (!ret)
-			ret = tmp_ret;
-	}
-	if (!ret)
-		perf_check_microcode();
+	ret = check_online_cpus();
+	if (ret)
+		goto put;
+
+	mutex_lock(&microcode_mutex);
+	ret = microcode_reload_late();
 	mutex_unlock(&microcode_mutex);
+
+put:
 	put_online_cpus();
 
-	if (!ret)
+	if (ret >= 0)
 		ret = size;
 
 	return ret;
@@ -606,10 +705,8 @@ static enum ucode_state microcode_init_cpu(int cpu, bool refresh_fw)
 	if (system_state != SYSTEM_RUNNING)
 		return UCODE_NFOUND;
 
-	ustate = microcode_ops->request_microcode_fw(cpu, &microcode_pdev->dev,
-						     refresh_fw);
-
-	if (ustate == UCODE_OK) {
+	ustate = microcode_ops->request_microcode_fw(cpu, &microcode_pdev->dev, refresh_fw);
+	if (ustate == UCODE_NEW) {
 		pr_debug("CPU%d updated upon init\n", cpu);
 		apply_microcode_on_target(cpu);
 	}