diff options
Diffstat (limited to 'arch/mips/include/asm/mipsregs.h')
| -rw-r--r-- | arch/mips/include/asm/mipsregs.h | 151 |
1 files changed, 18 insertions, 133 deletions
diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h index 3e025b5311db..98e9754a4b6b 100644 --- a/arch/mips/include/asm/mipsregs.h +++ b/arch/mips/include/asm/mipsregs.h @@ -709,11 +709,18 @@ #ifndef __ASSEMBLY__ /* - * Macros for handling the ISA mode bit for microMIPS. + * Macros for handling the ISA mode bit for MIPS16 and microMIPS. */ +#if defined(CONFIG_SYS_SUPPORTS_MIPS16) || \ + defined(CONFIG_SYS_SUPPORTS_MICROMIPS) #define get_isa16_mode(x) ((x) & 0x1) #define msk_isa16_mode(x) ((x) & ~0x1) #define set_isa16_mode(x) do { (x) |= 0x1; } while(0) +#else +#define get_isa16_mode(x) 0 +#define msk_isa16_mode(x) (x) +#define set_isa16_mode(x) do { } while(0) +#endif /* * microMIPS instructions can be 16-bit or 32-bit in length. This @@ -1007,19 +1014,8 @@ do { \ #define write_c0_compare3(val) __write_32bit_c0_register($11, 7, val) #define read_c0_status() __read_32bit_c0_register($12, 0) -#ifdef CONFIG_MIPS_MT_SMTC -#define write_c0_status(val) \ -do { \ - __write_32bit_c0_register($12, 0, val); \ - __ehb(); \ -} while (0) -#else -/* - * Legacy non-SMTC code, which may be hazardous - * but which might not support EHB - */ + #define write_c0_status(val) __write_32bit_c0_register($12, 0, val) -#endif /* CONFIG_MIPS_MT_SMTC */ #define read_c0_cause() __read_32bit_c0_register($13, 0) #define write_c0_cause(val) __write_32bit_c0_register($13, 0, val) @@ -1743,11 +1739,6 @@ static inline void tlb_write_random(void) /* * Manipulate bits in a c0 register. */ -#ifndef CONFIG_MIPS_MT_SMTC -/* - * SMTC Linux requires shutting-down microthread scheduling - * during CP0 register read-modify-write sequences. - */ #define __BUILD_SET_C0(name) \ static inline unsigned int \ set_c0_##name(unsigned int set) \ @@ -1786,121 +1777,6 @@ change_c0_##name(unsigned int change, unsigned int val) \ return res; \ } -#else /* SMTC versions that manage MT scheduling */ - -#include <linux/irqflags.h> - -/* - * This is a duplicate of dmt() in mipsmtregs.h to avoid problems with - * header file recursion. - */ -static inline unsigned int __dmt(void) -{ - int res; - - __asm__ __volatile__( - " .set push \n" - " .set mips32r2 \n" - " .set noat \n" - " .word 0x41610BC1 # dmt $1 \n" - " ehb \n" - " move %0, $1 \n" - " .set pop \n" - : "=r" (res)); - - instruction_hazard(); - - return res; -} - -#define __VPECONTROL_TE_SHIFT 15 -#define __VPECONTROL_TE (1UL << __VPECONTROL_TE_SHIFT) - -#define __EMT_ENABLE __VPECONTROL_TE - -static inline void __emt(unsigned int previous) -{ - if ((previous & __EMT_ENABLE)) - __asm__ __volatile__( - " .set mips32r2 \n" - " .word 0x41600be1 # emt \n" - " ehb \n" - " .set mips0 \n"); -} - -static inline void __ehb(void) -{ - __asm__ __volatile__( - " .set mips32r2 \n" - " ehb \n" " .set mips0 \n"); -} - -/* - * Note that local_irq_save/restore affect TC-specific IXMT state, - * not Status.IE as in non-SMTC kernel. - */ - -#define __BUILD_SET_C0(name) \ -static inline unsigned int \ -set_c0_##name(unsigned int set) \ -{ \ - unsigned int res; \ - unsigned int new; \ - unsigned int omt; \ - unsigned long flags; \ - \ - local_irq_save(flags); \ - omt = __dmt(); \ - res = read_c0_##name(); \ - new = res | set; \ - write_c0_##name(new); \ - __emt(omt); \ - local_irq_restore(flags); \ - \ - return res; \ -} \ - \ -static inline unsigned int \ -clear_c0_##name(unsigned int clear) \ -{ \ - unsigned int res; \ - unsigned int new; \ - unsigned int omt; \ - unsigned long flags; \ - \ - local_irq_save(flags); \ - omt = __dmt(); \ - res = read_c0_##name(); \ - new = res & ~clear; \ - write_c0_##name(new); \ - __emt(omt); \ - local_irq_restore(flags); \ - \ - return res; \ -} \ - \ -static inline unsigned int \ -change_c0_##name(unsigned int change, unsigned int newbits) \ -{ \ - unsigned int res; \ - unsigned int new; \ - unsigned int omt; \ - unsigned long flags; \ - \ - local_irq_save(flags); \ - \ - omt = __dmt(); \ - res = read_c0_##name(); \ - new = res & ~change; \ - new |= (newbits & change); \ - write_c0_##name(new); \ - __emt(omt); \ - local_irq_restore(flags); \ - \ - return res; \ -} -#endif - __BUILD_SET_C0(status) __BUILD_SET_C0(cause) __BUILD_SET_C0(config) @@ -1916,6 +1792,15 @@ __BUILD_SET_C0(brcm_cmt_ctrl) __BUILD_SET_C0(brcm_config) __BUILD_SET_C0(brcm_mode) +/* + * Return low 10 bits of ebase. + * Note that under KVM (MIPSVZ) this returns vcpu id. + */ +static inline unsigned int get_ebase_cpunum(void) +{ + return read_c0_ebase() & 0x3ff; +} + #endif /* !__ASSEMBLY__ */ #endif /* _ASM_MIPSREGS_H */ |