diff options
Diffstat (limited to 'arch/mips/Kconfig')
| -rw-r--r-- | arch/mips/Kconfig | 113 |
1 files changed, 75 insertions, 38 deletions
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index ad6badb6be71..3289969ee423 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -53,6 +53,7 @@ config MIPS select HAVE_CC_STACKPROTECTOR select CPU_PM if CPU_IDLE select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST + select ARCH_BINFMT_ELF_STATE menu "Machine selection" @@ -62,7 +63,7 @@ choice config MIPS_ALCHEMY bool "Alchemy processor based machines" - select 64BIT_PHYS_ADDR + select ARCH_PHYS_ADDR_T_64BIT select CEVT_R4K select CSRC_R4K select IRQ_CPU @@ -96,6 +97,20 @@ config AR7 Support for the Texas Instruments AR7 System-on-a-Chip family: TNETD7100, 7200 and 7300. +config ATH25 + bool "Atheros AR231x/AR531x SoC support" + select CEVT_R4K + select CSRC_R4K + select DMA_NONCOHERENT + select IRQ_CPU + select IRQ_DOMAIN + select SYS_HAS_CPU_MIPS32_R1 + select SYS_SUPPORTS_BIG_ENDIAN + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_HAS_EARLY_PRINTK + help + Support for Atheros AR231x and Atheros AR531x based boards + config ATH79 bool "Atheros AR71XX/AR724X/AR913X based boards" select ARCH_REQUIRE_GPIOLIB @@ -115,6 +130,32 @@ config ATH79 help Support for the Atheros AR71XX/AR724X/AR913X SoCs. +config BCM3384 + bool "Broadcom BCM3384 based boards" + select BOOT_RAW + select NO_EXCEPT_FILL + select USE_OF + select CEVT_R4K + select CSRC_R4K + select SYNC_R4K + select COMMON_CLK + select DMA_NONCOHERENT + select IRQ_CPU + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_BIG_ENDIAN + select SYS_SUPPORTS_HIGHMEM + select SYS_HAS_CPU_BMIPS5000 + select SWAP_IO_SPACE + select USB_EHCI_BIG_ENDIAN_DESC + select USB_EHCI_BIG_ENDIAN_MMIO + select USB_OHCI_BIG_ENDIAN_DESC + select USB_OHCI_BIG_ENDIAN_MMIO + help + Support for BCM3384 based boards. BCM3384/BCM33843 is a cable modem + chipset with a Linux application processor that is often used to + provide Samba services, a CUPS print server, and/or advanced routing + features. + config BCM47XX bool "Broadcom BCM47XX based boards" select ARCH_WANT_OPTIONAL_GPIOLIB @@ -269,6 +310,8 @@ config LANTIQ select USE_OF select PINCTRL select PINCTRL_LANTIQ + select ARCH_HAS_RESET_CONTROLLER + select RESET_CONTROLLER config LASAT bool "LASAT Networks platforms" @@ -315,17 +358,18 @@ config MIPS_MALTA select BOOT_RAW select CEVT_R4K select CSRC_R4K - select CSRC_GIC + select CLKSRC_MIPS_GIC select DMA_MAYBE_COHERENT select GENERIC_ISA_DMA select HAVE_PCSPKR_PLATFORM select IRQ_CPU - select IRQ_GIC + select MIPS_GIC select HW_HAS_PCI select I8253 select I8259 select MIPS_BONITO64 select MIPS_CPU_SCACHE + select MIPS_L1_CACHE_SHIFT_6 select PCI_GT64XXX_PCI0 select MIPS_MSC select SWAP_IO_SPACE @@ -340,6 +384,7 @@ config MIPS_MALTA select SYS_SUPPORTS_64BIT_KERNEL select SYS_SUPPORTS_BIG_ENDIAN select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_SUPPORTS_MICROMIPS select SYS_SUPPORTS_MIPS_CMP select SYS_SUPPORTS_MIPS_CPS select SYS_SUPPORTS_MIPS16 @@ -357,12 +402,12 @@ config MIPS_SEAD3 select BUILTIN_DTB select CEVT_R4K select CSRC_R4K - select CSRC_GIC + select CLKSRC_MIPS_GIC select CPU_MIPSR2_IRQ_VI select CPU_MIPSR2_IRQ_EI select DMA_NONCOHERENT select IRQ_CPU - select IRQ_GIC + select MIPS_GIC select LIBFDT select MIPS_MSC select SYS_HAS_CPU_MIPS32_R1 @@ -726,7 +771,7 @@ config MIKROTIK_RB532 config CAVIUM_OCTEON_SOC bool "Cavium Networks Octeon SoC based boards" select CEVT_R4K - select 64BIT_PHYS_ADDR + select ARCH_PHYS_ADDR_T_64BIT select DMA_COHERENT select SYS_SUPPORTS_64BIT_KERNEL select SYS_SUPPORTS_BIG_ENDIAN @@ -768,7 +813,7 @@ config NLM_XLR_BOARD select SWAP_IO_SPACE select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_64BIT_KERNEL - select 64BIT_PHYS_ADDR + select ARCH_PHYS_ADDR_T_64BIT select SYS_SUPPORTS_BIG_ENDIAN select SYS_SUPPORTS_HIGHMEM select DMA_COHERENT @@ -794,7 +839,7 @@ config NLM_XLP_BOARD select HW_HAS_PCI select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_64BIT_KERNEL - select 64BIT_PHYS_ADDR + select ARCH_PHYS_ADDR_T_64BIT select SYS_SUPPORTS_BIG_ENDIAN select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_SUPPORTS_HIGHMEM @@ -835,6 +880,7 @@ config MIPS_PARAVIRT endchoice source "arch/mips/alchemy/Kconfig" +source "arch/mips/ath25/Kconfig" source "arch/mips/ath79/Kconfig" source "arch/mips/bcm47xx/Kconfig" source "arch/mips/bcm63xx/Kconfig" @@ -907,10 +953,6 @@ config CEVT_GT641XX config CEVT_R4K bool -config CEVT_GIC - select MIPS_CM - bool - config CEVT_SB1250 bool @@ -926,10 +968,6 @@ config CSRC_IOASIC config CSRC_R4K bool -config CSRC_GIC - select MIPS_CM - bool - config CSRC_SB1250 bool @@ -941,7 +979,7 @@ config FW_CFE bool config ARCH_DMA_ADDR_T_64BIT - def_bool (HIGHMEM && 64BIT_PHYS_ADDR) || 64BIT + def_bool (HIGHMEM && ARCH_PHYS_ADDR_T_64BIT) || 64BIT config DMA_MAYBE_COHERENT select DMA_NONCOHERENT @@ -975,6 +1013,7 @@ config SYS_SUPPORTS_HOTPLUG_CPU config I8259 bool + select IRQ_DOMAIN config MIPS_BONITO64 bool @@ -1055,6 +1094,7 @@ config MIPS_HUGE_TLB_SUPPORT config IRQ_CPU bool + select IRQ_DOMAIN config IRQ_CPU_RM7K bool @@ -1071,10 +1111,6 @@ config IRQ_TXX9 config IRQ_GT641XX bool -config IRQ_GIC - select MIPS_CM - bool - config PCI_GT64XXX_PCI0 bool @@ -1574,6 +1610,7 @@ config CPU_LOONGSON1 select CPU_HAS_PREFETCH select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_HIGHMEM + select CPU_SUPPORTS_CPUFREQ config CPU_BMIPS32_3300 select SMP_UP if SMP @@ -1586,12 +1623,14 @@ config CPU_BMIPS4350 config CPU_BMIPS4380 bool + select MIPS_L1_CACHE_SHIFT_6 select SYS_SUPPORTS_SMP select SYS_SUPPORTS_HOTPLUG_CPU config CPU_BMIPS5000 bool select MIPS_CPU_SCACHE + select MIPS_L1_CACHE_SHIFT_7 select SYS_SUPPORTS_SMP select SYS_SUPPORTS_HOTPLUG_CPU @@ -1886,15 +1925,6 @@ config FORCE_MAX_ZONEORDER The page size is not necessarily 4KB. Keep this in mind when choosing a value for this option. -config CEVT_GIC - bool "Use GIC global counter for clock events" - depends on IRQ_GIC && !MIPS_SEAD3 - help - Use the GIC global counter for the clock events. The R4K clock - event driver is always present, so if the platform ends up not - detecting a GIC, it will fall back to the R4K timer for the - generation of clock events. - config BOARD_SCACHE bool @@ -1908,7 +1938,6 @@ config IP22_CPU_SCACHE config MIPS_CPU_SCACHE bool select BOARD_SCACHE - select MIPS_L1_CACHE_SHIFT_6 config R5000_CPU_SCACHE bool @@ -2066,6 +2095,7 @@ config MIPS_CPS support is unavailable. config MIPS_CPS_PM + depends on MIPS_CPS select MIPS_CPC bool @@ -2094,15 +2124,20 @@ config SB1_PASS_2_1_WORKAROUNDS default y -config 64BIT_PHYS_ADDR - bool - config ARCH_PHYS_ADDR_T_64BIT - def_bool 64BIT_PHYS_ADDR + bool + +choice + prompt "SmartMIPS or microMIPS ASE support" + +config CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS + bool "None" + help + Select this if you want neither microMIPS nor SmartMIPS support config CPU_HAS_SMARTMIPS depends on SYS_SUPPORTS_SMARTMIPS - bool "Support for the SmartMIPS ASE" + bool "SmartMIPS" help SmartMIPS is a extension of the MIPS32 architecture aimed at increased security at both hardware and software level for @@ -2113,12 +2148,14 @@ config CPU_HAS_SMARTMIPS here. config CPU_MICROMIPS - depends on SYS_SUPPORTS_MICROMIPS - bool "Build kernel using microMIPS ISA" + depends on 32BIT && SYS_SUPPORTS_MICROMIPS + bool "microMIPS" help When this option is enabled the kernel will be built using the microMIPS ISA +endchoice + config CPU_HAS_MSA bool "Support for the MIPS SIMD Architecture (EXPERIMENTAL)" depends on CPU_SUPPORTS_MSA |